1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
|
This is a (very) brief summary of some of things that need to be
done to write a Frame Lock NV-CONTROL client.
-------------------------------------------------------------------------------
Section 1 - Writing a Frame Lock client for NV-CONTROL 1.8 (and earlier)
Please see the sample NV-CONTROL clients in the "samples" directory
for basic examples of how to set integer attributes. See the
file ctkframelock.c for a much more involved example of how the
nvidia-settings utility programs the Frame Lock attributes.
The constants referenced below are defined in NVCtrl.h. Please see the
comments in that file for an explanation of each attribute. It may
also be instructive to grep ctkframelock.c to see how each attribute
is used.
Basic steps:
- Open a Display connection to each X Screen you want to control
in your Frame Lock cluster. Please make sure you have
priviledges to establish the X connection.
- Query the NV_CTRL_FRAMELOCK attribute to determine if Frame Lock
is supported on each X screen.
- Set NV_CTRL_FRAMELOCK_MASTER to NV_CTRL_FRAMELOCK_MASTER_TRUE on
one node in the cluster; set it to NV_CTRL_FRAMELOCK_MASTER_FALSE
to every other node in the cluster.
- Set NV_CTRL_FRAMELOCK_POLARITY for each slave node in the cluster;
most likely you want NV_CTRL_FRAMELOCK_POLARITY_RISING_EDGE.
- Set NV_CTRL_FRAMELOCK_SYNC_DELAY as appropriate for each node.
Most likely you want 0.
- Set NV_CTRL_FRAMELOCK_SYNC_INTERVAL as appropriate if you
are using house sync. Most likely, you just want 0.
- Set NV_CTRL_FRAMELOCK_SYNC to NV_CTRL_FRAMELOCK_SYNC_ENABLE on
each X screen to enable FrameLock.
- (optional) set NV_CTRL_FRAMELOCK_TEST_SIGNAL to
NV_CTRL_FRAMELOCK_TEST_SIGNAL_ENABLE followed immediately by
NV_CTRL_FRAMELOCK_TEST_SIGNAL_DISABLE. This guarantees
accuracy of the Universal Frame Count (as returned by
glXQueryFrameCountNV()).
- When you are done, set NV_CTRL_FRAMELOCK_SYNC to
NV_CTRL_FRAMELOCK_SYNC_DISABLE on each X screen to disable Frame Lock.
During operation, you can also query any of these on each X screen:
NV_CTRL_FRAMELOCK_PORT0_STATUS
NV_CTRL_FRAMELOCK_PORT1_STATUS
NV_CTRL_FRAMELOCK_HOUSE_STATUS
NV_CTRL_FRAMELOCK_SYNC_READY
NV_CTRL_FRAMELOCK_STEREO_SYNC
NV_CTRL_FRAMELOCK_ETHERNET_DETECTED
NV_CTRL_FRAMELOCK_SYNC_RATE
NV_CTRL_FRAMELOCK_TIMING
(nvidia-settings registers a gtk+ timeout function and queries the
state of these on each X screen every few seconds).
-------------------------------------------------------------------------------
Section 2 - Writing a Frame Lock client for NV-CONTROL 1.9 (and later)
Configuration of Frame Lock has changed in NV-CONTROL 1.9. There are two
major differences:
- Display Devices (instead of X Screens) are now selected as the clients &
slaves of a Frame Lock group.
- Frame Lock attributes should now be set/queried on GPUs
(NV_CTRL_TARGET_TYPE_GPU) and Quadro Sync (Frame Lock) devices
(NV_CTRL_TARGET_TYPE_FRAMELOCK) using the new NV-CONTROL targeting API.
Please see the sample NV-CONTROL clients in the "samples" directory
for basic examples of how to use the new targeting API (nv-control-targets.c),
and a basic Frame Lock client (nv-control-framelock.c). See the file
ctkframelock.c for a much more involved example of how the nvidia-settings
utility programs the Frame Lock attributes.
The constants referenced below are defined in NVCtrl.h. Please see the
comments in that file for an explanation of each attribute. It may
also be instructive to grep ctkframelock.c to see how each attribute
is used.
Querying frame lock capabilities of a system:
- Query the number of Quadro Sync devices on the system by passing
NV_CTRL_TARGET_TYPE_FRAMELOCK to XNVCTRLQueryTargetCount()
- Query the GPUs attached to each Quadro Sync device by querying the
NV_CTRL_GPUS_USING_FRAMELOCK attribute for each Quadro Sync device.
- Query the enabled (available) display devices on each GPU through
the NV_CTRL_ENABLED_DISPLAYS attribute.
Configuring the Frame Lock group (This must be done while Frame Lock Sync is
disabled on the GPU/Quadro Sync Device):
- Set the Frame Lock Master Display Device on one of the GPUs through the
NV_CTRL_FRAMELOCK_MASTER attribute.
- Set the rest of the display devices as slaves through the
NV_CTRL_FRAMELOCK_SLAVES attribute.
- Set NV_CTRL_USE_HOUSE_SYNC to NV_CTRL_USE_HOUSE_SYNC_TRUE or
NV_CTRL_USE_HOUSE_SYNC_FALSE on the master Quadro Sync device (this is
the Quadro Sync device that is attached to the GPU that contains the
display device currently set as the frame lock master.) Depending on
whether or not you will be using a House Sync signal.
- Set NV_CTRL_FRAMELOCK_POLARITY for each slave Quadro Sync device in the
cluster; most likely you want NV_CTRL_FRAMELOCK_POLARITY_RISING_EDGE.
- Set NV_CTRL_FRAMELOCK_SYNC_DELAY as appropriate for each Quadro Sync
device. Most likely you want 0.
- Set NV_CTRL_FRAMELOCK_SYNC_INTERVAL as appropriate if you
are using house sync. Most likely, you just want 0.
Enabling/Disabling Frame Lock:
- Enable Frame Lock on each GPU by setting NV_CTRL_FRAMELOCK_SYNC
to NV_CTRL_FRAMELOCK_SYNC_ENABLE.
- (optional) set NV_CTRL_FRAMELOCK_TEST_SIGNAL to
NV_CTRL_FRAMELOCK_TEST_SIGNAL_ENABLE followed immediately by
NV_CTRL_FRAMELOCK_TEST_SIGNAL_DISABLE (on the GPU that contains the
master Frame Lock display device.) This guarantees accuracy of the
Universal Frame Count (as returned by glXQueryFrameCountNV()).
- When you are done, set NV_CTRL_FRAMELOCK_SYNC to
NV_CTRL_FRAMELOCK_SYNC_DISABLE on each GPU to disable Frame Lock.
During operation, you can also query any of these on each GPU or Frame Lock
device:
NV_CTRL_FRAMELOCK_PORT0_STATUS
NV_CTRL_FRAMELOCK_PORT1_STATUS
NV_CTRL_FRAMELOCK_HOUSE_STATUS
NV_CTRL_FRAMELOCK_SYNC_READY
NV_CTRL_FRAMELOCK_STEREO_SYNC
NV_CTRL_FRAMELOCK_ETHERNET_DETECTED
NV_CTRL_FRAMELOCK_SYNC_RATE
NV_CTRL_FRAMELOCK_TIMING
|
