// This file is generated by WOK (CPPExt).
// Please do not edit this file; modify original file instead.
// The copyright and license terms as defined for the original file apply to 
// this header file considered to be the "object code" form of the original source.

#ifndef _BRepFill_Filling_HeaderFile
#define _BRepFill_Filling_HeaderFile

#include <Standard.hxx>
#include <Standard_DefineAlloc.hxx>
#include <Standard_Macro.hxx>

#include <GeomPlate_BuildPlateSurface.hxx>
#include <BRepFill_SequenceOfEdgeFaceAndOrder.hxx>
#include <BRepFill_SequenceOfFaceAndOrder.hxx>
#include <GeomPlate_SequenceOfPointConstraint.hxx>
#include <TopTools_DataMapOfShapeListOfShape.hxx>
#include <TopTools_ListOfShape.hxx>
#include <TopoDS_Face.hxx>
#include <Standard_Real.hxx>
#include <Standard_Integer.hxx>
#include <Standard_Boolean.hxx>
#include <GeomAbs_Shape.hxx>
class StdFail_NotDone;
class Standard_OutOfRange;
class Standard_ConstructionError;
class TopoDS_Face;
class TopoDS_Edge;
class gp_Pnt;
class BRepFill_SequenceOfEdgeFaceAndOrder;
class TopTools_ListOfShape;
class TopTools_SequenceOfShape;
class TopoDS_Shape;


//! N-Side Filling
//! This algorithm avoids to build a face from:
//! * a set of edges defining the bounds of the face and some
//! constraints the surface support has to satisfy
//! * a set of edges and points defining some constraints
//! the support surface has to satisfy
//! * an initial surface to deform for satisfying the constraints
//! * a set of parameters to control the constraints.
//!
//! The support surface of the face is computed by deformation
//! of the initial surface in order to satisfy the given constraints.
//! The set of bounding edges defines the wire of the face.
//!
//! If no initial surface is given, the algorithm computes it
//! automatically.
//! If the set of edges is not connected (Free constraint)
//! missing edges are automatically computed.
//!
//! Limitations:
//! * If some constraints are not compatible
//! The algorithm does not take them into account.
//! So the constraints will not be satisfyed in an area containing
//! the incompatibilitries.
//! * The constraints defining the bound of the face have to be
//! entered in order to have a continuous wire.
//!
//! Other Applications:
//! * Deformation of a face to satisfy internal constraints
//! * Deformation of a face to improve Gi continuity with
//! connected faces
class BRepFill_Filling 
{
public:

  DEFINE_STANDARD_ALLOC

  
  //! Constructor
  Standard_EXPORT BRepFill_Filling(const Standard_Integer Degree = 3, const Standard_Integer NbPtsOnCur = 15, const Standard_Integer NbIter = 2, const Standard_Boolean Anisotropie = Standard_False, const Standard_Real Tol2d = 0.00001, const Standard_Real Tol3d = 0.0001, const Standard_Real TolAng = 0.01, const Standard_Real TolCurv = 0.1, const Standard_Integer MaxDeg = 8, const Standard_Integer MaxSegments = 9);
  
  //! Sets the values of Tolerances used to control the constraint.
  //! Tol2d:
  //! Tol3d:   it is the maximum distance allowed between the support surface
  //! and the constraints
  //! TolAng:  it is the maximum angle allowed between the normal of the surface
  //! and the constraints
  //! TolCurv: it is the maximum difference of curvature allowed between
  //! the surface and the constraint
  Standard_EXPORT   void SetConstrParam (const Standard_Real Tol2d = 0.00001, const Standard_Real Tol3d = 0.0001, const Standard_Real TolAng = 0.01, const Standard_Real TolCurv = 0.1) ;
  
  //! Sets the parameters used for resolution.
  //! The default values of these parameters have been chosen for a good
  //! ratio quality/performance.
  //! Degree:      it is the order of energy criterion to minimize for computing
  //! the deformation of the surface.
  //! The default value is 3
  //! The recommanded value is i+2 where i is the maximum order of the
  //! constraints.
  //! NbPtsOnCur:  it is the average number of points for discretisation
  //! of the edges.
  //! NbIter:      it is the maximum number of iterations of the process.
  //! For each iteration the number of discretisation points is
  //! increased.
  //! Anisotropie:
  Standard_EXPORT   void SetResolParam (const Standard_Integer Degree = 3, const Standard_Integer NbPtsOnCur = 15, const Standard_Integer NbIter = 2, const Standard_Boolean Anisotropie = Standard_False) ;
  
  //! Sets the parameters used for approximation of the surface
  Standard_EXPORT   void SetApproxParam (const Standard_Integer MaxDeg = 8, const Standard_Integer MaxSegments = 9) ;
  
  //! Loads the initial Surface
  //! The initial surface must have orthogonal local coordinates,
  //! i.e. partial derivatives dS/du and dS/dv must be orthogonal
  //! at each point of surface.
  //! If this condition breaks, distortions of resulting surface
  //! are possible.
  Standard_EXPORT   void LoadInitSurface (const TopoDS_Face& aFace) ;
  
  //! Adds a new constraint which also defines an edge of the wire
  //! of the face
  //! Order: Order of the constraint:
  //! GeomAbs_C0 : the surface has to pass by 3D representation
  //! of the edge
  //! GeomAbs_G1 : the surface has to pass by 3D representation
  //! of the edge and to respect tangency with the first
  //! face of the edge
  //! GeomAbs_G2 : the surface has to pass by 3D representation
  //! of the edge and to respect tangency and curvature
  //! with the first face of the edge.
  Standard_EXPORT   Standard_Integer Add (const TopoDS_Edge& anEdge, const GeomAbs_Shape Order, const Standard_Boolean IsBound = Standard_True) ;
  
  //! Adds a new constraint which also defines an edge of the wire
  //! of the face
  //! Order: Order of the constraint:
  //! GeomAbs_C0 : the surface has to pass by 3D representation
  //! of the edge
  //! GeomAbs_G1 : the surface has to pass by 3D representation
  //! of the edge and to respect tangency with the
  //! given face
  //! GeomAbs_G2 : the surface has to pass by 3D representation
  //! of the edge and to respect tangency and curvature
  //! with the given face.
  Standard_EXPORT   Standard_Integer Add (const TopoDS_Edge& anEdge, const TopoDS_Face& Support, const GeomAbs_Shape Order, const Standard_Boolean IsBound = Standard_True) ;
  
  //! Adds a free constraint on a face. The corresponding edge has to
  //! be automatically recomputed.
  //! It is always a bound.
  Standard_EXPORT   Standard_Integer Add (const TopoDS_Face& Support, const GeomAbs_Shape Order) ;
  
  //! Adds a punctual constraint
  Standard_EXPORT   Standard_Integer Add (const gp_Pnt& Point) ;
  
  //! Adds a punctual constraint.
  Standard_EXPORT   Standard_Integer Add (const Standard_Real U, const Standard_Real V, const TopoDS_Face& Support, const GeomAbs_Shape Order) ;
  
  //! Builds the resulting faces
  Standard_EXPORT   void Build() ;
  
  Standard_EXPORT   Standard_Boolean IsDone()  const;
  
  Standard_EXPORT   TopoDS_Face Face()  const;
  
  //! Returns the list of shapes generated from the
  //! shape <S>.
  Standard_EXPORT  const  TopTools_ListOfShape& Generated (const TopoDS_Shape& S) ;
  
  Standard_EXPORT   Standard_Real G0Error()  const;
  
  Standard_EXPORT   Standard_Real G1Error()  const;
  
  Standard_EXPORT   Standard_Real G2Error()  const;
  
  Standard_EXPORT   Standard_Real G0Error (const Standard_Integer Index) ;
  
  Standard_EXPORT   Standard_Real G1Error (const Standard_Integer Index) ;
  
  Standard_EXPORT   Standard_Real G2Error (const Standard_Integer Index) ;




protected:





private:

  
  //! Adds constraints to builder
  Standard_EXPORT   void AddConstraints (const BRepFill_SequenceOfEdgeFaceAndOrder& SeqOfConstraints) ;
  
  //! Builds wires of maximum length
  Standard_EXPORT   void BuildWires (TopTools_ListOfShape& EdgeList, TopTools_ListOfShape& WireList) ;
  
  //! Finds extremities of future edges to fix the holes between wires.
  //! Can properly operate only with convex contour
  Standard_EXPORT   void FindExtremitiesOfHoles (const TopTools_ListOfShape& WireList, TopTools_SequenceOfShape& VerSeq)  const;


  GeomPlate_BuildPlateSurface myBuilder;
  BRepFill_SequenceOfEdgeFaceAndOrder myBoundary;
  BRepFill_SequenceOfEdgeFaceAndOrder myConstraints;
  BRepFill_SequenceOfFaceAndOrder myFreeConstraints;
  GeomPlate_SequenceOfPointConstraint myPoints;
  TopTools_DataMapOfShapeListOfShape myOldNewMap;
  TopTools_ListOfShape myGenerated;
  TopoDS_Face myFace;
  TopoDS_Face myInitFace;
  Standard_Real myTol2d;
  Standard_Real myTol3d;
  Standard_Real myTolAng;
  Standard_Real myTolCurv;
  Standard_Integer myMaxDeg;
  Standard_Integer myMaxSegments;
  Standard_Integer myDegree;
  Standard_Integer myNbPtsOnCur;
  Standard_Integer myNbIter;
  Standard_Boolean myAnisotropie;
  Standard_Boolean myIsInitFaceGiven;
  Standard_Boolean myIsDone;


};







#endif // _BRepFill_Filling_HeaderFile