1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
|
## Copyright (C) 2021 John Donoghue <john.donoghue@ieee.org>
##
## This program is free software: you can redistribute it and/or modify it
## under the terms of the GNU General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful, but
## WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program. If not, see
## <https://www.gnu.org/licenses/>.
## -*- texinfo -*-
## @deftypefn {} {@var{retval} =} config_esp32_dev (@var{initdata})
## Private function for setting allowed modes of esp board pins
## @end deftypefn
# configuration generated from esp32/2.0.2/variants/esp32/pins_arduino.h
function retval = config_esp32_dev (initdata)
retval = {};
# default board info - must be provided
# will be filled in on connection.
retval.board = '';
retval.baudrate = 9600;
retval.mcu = 'eps32';
retval.voltref = 0;
retval.libs = {};
retval.port = '';
# info expected to be provided by config.
retval.description = 'ESP32 Dev Module';
# pin config
retval.pins = {};
retval.pins{end+1} = arduinoio.config.pin_info('D0', 0, { 'digital', 'pwm', 'interrupt', 'analog' }, {'a11'});
retval.pins{end+1} = arduinoio.config.pin_info('D1', 1, { 'digital', 'pwm', 'uart0_tx', 'interrupt' });
retval.pins{end+1} = arduinoio.config.pin_info('D2', 2, { 'digital', 'pwm', 'interrupt', 'led', 'analog' }, {'a12'});
retval.pins{end+1} = arduinoio.config.pin_info('D3', 3, { 'digital', 'pwm', 'uart0_rx', 'interrupt' });
retval.pins{end+1} = arduinoio.config.pin_info('D4', 4, { 'digital', 'pwm', 'interrupt', 'analog' }, {'a4'});
retval.pins{end+1} = arduinoio.config.pin_info('D5', 5, { 'digital', 'pwm', 'interrupt', 'spi_ss' });
# dont use
#retval.pins{end+1} = arduinoio.config.pin_info('D6', 6, { 'digital', 'pwm', 'interrupt' });
#retval.pins{end+1} = arduinoio.config.pin_info('D7', 7, { 'digital', 'pwm', 'interrupt' });
#retval.pins{end+1} = arduinoio.config.pin_info('D8', 8, { 'digital', 'pwm', 'interrupt' });
#retval.pins{end+1} = arduinoio.config.pin_info('D9', 9, { 'digital', 'pwm', 'interrupt' });
#retval.pins{end+1} = arduinoio.config.pin_info('D10', 10, { 'digital', 'pwm', 'interrupt' });
#retval.pins{end+1} = arduinoio.config.pin_info('D11', 11, { 'digital', 'pwm', 'interrupt' });
retval.pins{end+1} = arduinoio.config.pin_info('D12', 12, { 'digital', 'pwm', 'interrupt', 'analog' }, {'a15'});
retval.pins{end+1} = arduinoio.config.pin_info('D13', 13, { 'digital', 'pwm', 'interrupt', 'analog' }, {'a14'});
retval.pins{end+1} = arduinoio.config.pin_info('D14', 14, { 'digital', 'pwm', 'interrupt', 'analog' }, {'a16'});
retval.pins{end+1} = arduinoio.config.pin_info('D15', 15, { 'digital', 'pwm', 'interrupt', 'analog' }, {'a13'});
retval.pins{end+1} = arduinoio.config.pin_info('D16', 16, { 'digital', 'pwm', 'interrupt' });
retval.pins{end+1} = arduinoio.config.pin_info('D17', 17, { 'digital', 'pwm', 'interrupt' });
retval.pins{end+1} = arduinoio.config.pin_info('D18', 18, { 'digital', 'pwm', 'interrupt', 'spi_sck' });
retval.pins{end+1} = arduinoio.config.pin_info('D19', 19, { 'digital', 'pwm', 'interrupt', 'spi_miso' });
#retval.pins{end+1} = arduinoio.config.pin_info('D20', 20, { 'digital', 'pwm', 'interrupt' });
retval.pins{end+1} = arduinoio.config.pin_info('D21', 21, { 'digital', 'pwm', 'interrupt', 'i2c_sda' });
retval.pins{end+1} = arduinoio.config.pin_info('D22', 22, { 'digital', 'pwm', 'interrupt', 'i2c_scl' });
retval.pins{end+1} = arduinoio.config.pin_info('D23', 23, { 'digital', 'pwm', 'interrupt', 'spi_mosi' });
#retval.pins{end+1} = arduinoio.config.pin_info('D24', 24, { 'digital', 'pwm', 'interrupt' });
retval.pins{end+1} = arduinoio.config.pin_info('D25', 25, { 'digital', 'pwm', 'interrupt', 'analog' }, {'a18'});
retval.pins{end+1} = arduinoio.config.pin_info('D26', 26, { 'digital', 'pwm', 'interrupt', 'analog' }, {'a19'});
retval.pins{end+1} = arduinoio.config.pin_info('D27', 27, { 'digital', 'pwm', 'interrupt', 'analog' }, {'a17'});
#retval.pins{end+1} = arduinoio.config.pin_info('D28', 28, { 'digital', 'pwm', 'interrupt' });
#retval.pins{end+1} = arduinoio.config.pin_info('D29', 29, { 'digital', 'pwm', 'interrupt' });
#retval.pins{end+1} = arduinoio.config.pin_info('D30', 30, { 'digital', 'pwm', 'interrupt' });
#retval.pins{end+1} = arduinoio.config.pin_info('D31', 31, { 'digital', 'pwm', 'interrupt' });
retval.pins{end+1} = arduinoio.config.pin_info('D32', 32, { 'digital', 'pwm', 'interrupt', 'analog' }, {'a4'});
retval.pins{end+1} = arduinoio.config.pin_info('D33', 33, { 'digital', 'pwm', 'interrupt', 'anolog' }, {'a5'});
retval.pins{end+1} = arduinoio.config.pin_info('D34', 34, { 'digital', 'analog' }, {'a6'});
retval.pins{end+1} = arduinoio.config.pin_info('D35', 35, { 'digital', 'analog' }, {'a7'});
retval.pins{end+1} = arduinoio.config.pin_info('D36', 36, { 'digital', 'analog' }, {'a0'});
retval.pins{end+1} = arduinoio.config.pin_info('D37', 37, { 'digital' });
retval.pins{end+1} = arduinoio.config.pin_info('D38', 38, { 'digital' });
retval.pins{end+1} = arduinoio.config.pin_info('D39', 39, { 'digital', 'analog' }, {'a3'});
%{
analog are in the digital pins
retval.pins{end+1} = arduinoio.config.pin_info('A0', 40, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A1', 41, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A2', 42, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A3', 43, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A4', 44, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A5', 45, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A6', 46, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A7', 47, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A8', 48, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A9', 49, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A10', 50, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A11', 51, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A12', 52, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A13', 53, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A14', 54, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A15', 55, { 'digital', 'analog' });
%}
endfunction
|
