1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
|
## Copyright (C) 2019 John Donoghue <john.donoghue@ieee.org>
##
## This program is free software: you can redistribute it and/or modify it
## under the terms of the GNU General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This program is distributed in the hope that it will be useful, but
## WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program. If not, see
## <https://www.gnu.org/licenses/>.
## -*- texinfo -*-
## @deftypefn {} {@var{retval} =} config_micro (@var{initdata})
## Private function for setting allowed modes of micro board pins
## @end deftypefn
function retval = config_micro (initdata)
retval = {};
# default board info - must be provided
# will be filled in on connection.
retval.board = 'micro';
retval.baudrate = 9600;
retval.mcu = '';
retval.voltref = 0;
retval.libs = {};
retval.port = '';
# info expected to be provided by config.
retval.description = 'Arduino Micro Board';
# pin config
retval.pins = {};
retval.pins{end+1} = arduinoio.config.pin_info('D0', 0, { 'digital', 'uart1_rx' });
retval.pins{end+1} = arduinoio.config.pin_info('D1', 1, { 'digital', 'uart1_tx' });
retval.pins{end+1} = arduinoio.config.pin_info('D2', 2, { 'digital', 'i2c_sda', 'interrupt' });
retval.pins{end+1} = arduinoio.config.pin_info('D3', 3, { 'digital', 'i2c_scl', 'interrupt', 'pwm' });
retval.pins{end+1} = arduinoio.config.pin_info('D4', 4, { 'digital' }, {"A6"}); # share A6
retval.pins{end+1} = arduinoio.config.pin_info('D5', 5, { 'digital', 'pwm' });
retval.pins{end+1} = arduinoio.config.pin_info('D6', 6, { 'digital', 'pwm' }, {"A7"}); # share A7
retval.pins{end+1} = arduinoio.config.pin_info('D7', 7, { 'digital', 'interrupt' });
retval.pins{end+1} = arduinoio.config.pin_info('D8', 8, { 'digital' }, {"A8"}); # share A8
retval.pins{end+1} = arduinoio.config.pin_info('D9', 9, { 'digital', 'pwm' }, {"A9"}); # share A9
retval.pins{end+1} = arduinoio.config.pin_info('D10', 10, { 'digital', 'pwm' }, {"A10"}); # share A10
retval.pins{end+1} = arduinoio.config.pin_info('D11', 11, { 'digital', 'pwm' });
retval.pins{end+1} = arduinoio.config.pin_info('D12', 12, { 'digital' });
retval.pins{end+1} = arduinoio.config.pin_info('D13', 13, { 'digital', 'led', 'pwm' });
retval.pins{end+1} = arduinoio.config.pin_info('D14', 14, { 'digital', 'spi_miso' });
retval.pins{end+1} = arduinoio.config.pin_info('D15', 15, { 'digital', 'spi_sck' });
retval.pins{end+1} = arduinoio.config.pin_info('D16', 16, { 'digital', 'spi_mosi' });
retval.pins{end+1} = arduinoio.config.pin_info('D17', 17, { 'digital', 'spi_ss', 'led' });
retval.pins{end+1} = arduinoio.config.pin_info('A0', 18, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A1', 19, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A2', 20, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A3', 21, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A4', 22, { 'digital', 'analog' });
retval.pins{end+1} = arduinoio.config.pin_info('A5', 23, { 'digital', 'analog' });
endfunction
|
