// File generated by CPPExt (Value)
//
//                     Copyright (C) 1991 - 2000 by  
//                      Matra Datavision SA.  All rights reserved.
//  
//                     Copyright (C) 2001 - 2004 by
//                     Open CASCADE SA.  All rights reserved.
// 
// This file is part of the Open CASCADE Technology software.
//
// This software may be distributed and/or modified under the terms and
// conditions of the Open CASCADE Public License as defined by Open CASCADE SA
// and appearing in the file LICENSE included in the packaging of this file.
//  
// This software is distributed on an "AS IS" basis, without warranty of any
// kind, and Open CASCADE SA hereby disclaims all such warranties,
// including without limitation, any warranties of merchantability, fitness
// for a particular purpose or non-infringement. Please see the License for
// the specific terms and conditions governing rights and limitations under the
// License.

#ifndef _StepData_StepWriter_HeaderFile
#define _StepData_StepWriter_HeaderFile

#ifndef _Handle_StepData_StepModel_HeaderFile
#include <Handle_StepData_StepModel.hxx>
#endif
#ifndef _Handle_TColStd_HSequenceOfHAsciiString_HeaderFile
#include <Handle_TColStd_HSequenceOfHAsciiString.hxx>
#endif
#ifndef _Interface_LineBuffer_HeaderFile
#include <Interface_LineBuffer.hxx>
#endif
#ifndef _Standard_Boolean_HeaderFile
#include <Standard_Boolean.hxx>
#endif
#ifndef _Standard_Integer_HeaderFile
#include <Standard_Integer.hxx>
#endif
#ifndef _Interface_FloatWriter_HeaderFile
#include <Interface_FloatWriter.hxx>
#endif
#ifndef _Interface_CheckIterator_HeaderFile
#include <Interface_CheckIterator.hxx>
#endif
#ifndef _Handle_TColStd_HArray1OfInteger_HeaderFile
#include <Handle_TColStd_HArray1OfInteger.hxx>
#endif
#ifndef _Handle_StepData_Protocol_HeaderFile
#include <Handle_StepData_Protocol.hxx>
#endif
#ifndef _Standard_CString_HeaderFile
#include <Standard_CString.hxx>
#endif
#ifndef _Handle_TCollection_HAsciiString_HeaderFile
#include <Handle_TCollection_HAsciiString.hxx>
#endif
#ifndef _Handle_StepData_PDescr_HeaderFile
#include <Handle_StepData_PDescr.hxx>
#endif
#ifndef _Handle_StepData_SelectMember_HeaderFile
#include <Handle_StepData_SelectMember.hxx>
#endif
#ifndef _Handle_StepData_ESDescr_HeaderFile
#include <Handle_StepData_ESDescr.hxx>
#endif
#ifndef _Standard_Real_HeaderFile
#include <Standard_Real.hxx>
#endif
#ifndef _Handle_Standard_Transient_HeaderFile
#include <Handle_Standard_Transient.hxx>
#endif
#ifndef _StepData_Logical_HeaderFile
#include <StepData_Logical.hxx>
#endif
#ifndef _Handle_TColStd_HArray1OfReal_HeaderFile
#include <Handle_TColStd_HArray1OfReal.hxx>
#endif
#ifndef _Standard_OStream_HeaderFile
#include <Standard_OStream.hxx>
#endif
class StepData_StepModel;
class TColStd_HSequenceOfHAsciiString;
class TColStd_HArray1OfInteger;
class Interface_InterfaceMismatch;
class Interface_FloatWriter;
class StepData_Protocol;
class StepData_WriterLib;
class TCollection_AsciiString;
class TCollection_HAsciiString;
class StepData_Field;
class StepData_PDescr;
class StepData_SelectMember;
class StepData_FieldList;
class StepData_ESDescr;
class Standard_Transient;
class TColStd_HArray1OfReal;
class Interface_CheckIterator;


#ifndef _Standard_HeaderFile
#include <Standard.hxx>
#endif
#ifndef _Standard_Macro_HeaderFile
#include <Standard_Macro.hxx>
#endif

//! manages atomic file writing, under control of StepModel (for <br>
//!           general organisation of file) and each class of Transient <br>
//!           (for its own parameters) : prepares text to be written then <br>
//!           writes it <br>
//!           A stream cannot be used because Step limits line length at 72 <br>
//!           In more, a specific object offers more appropriate functions <br>
class StepData_StepWriter  {

public:

    void* operator new(size_t,void* anAddress) 
      {
        return anAddress;
      }
    void* operator new(size_t size) 
      { 
        return Standard::Allocate(size); 
      }
    void  operator delete(void *anAddress) 
      { 
        if (anAddress) Standard::Free((Standard_Address&)anAddress); 
      }
 // Methods PUBLIC
 // 

//! Creates an empty StepWriter from a StepModel. The StepModel <br>
//!           provides the Number of Entities, as identifiers for File <br>
Standard_EXPORT StepData_StepWriter(const Handle(StepData_StepModel)& amodel);

//! ModeLabel controls how to display entity ids : <br>
//!           0 (D) gives entity number in the model <br>
//!           1 gives the already recorded label (else, its number) <br>
//!  Warning : conflicts are not controlled <br>
Standard_EXPORT   Standard_Integer& LabelMode() ;

//! TypeMode  controls the type form to use : <br>
//!           0 (D) for normal long form <br>
//!           1 for short form (if a type name has no short form, normal <br>
//!             long form is then used) <br>
Standard_EXPORT   Standard_Integer& TypeMode() ;

//! Returns the embedded FloatWriter, which controls sending Reals <br>
//!           Use this method to access FloatWriter in order to consult or <br>
//!           change its options (MainFormat, FormatForRange,ZeroSuppress), <br>
//!           because it is returned as the address of its field <br>
Standard_EXPORT   Interface_FloatWriter& FloatWriter() ;

//! Declares the Entity Number <numscope> to correspond to a Scope <br>
//!           which contains the Entity Number <numin>. Several calls to the <br>
//!           same <numscope> add Entities in this Scope, in this order. <br>//!           Error if <numin> is already declared in the Scope <br>
//!  Warning : the declaration of the Scopes is assumed to be consistent, <br>
//!           i.e. <numin> is not referenced from outside this Scope <br>
//!           (not checked here) <br>
Standard_EXPORT   void SetScope(const Standard_Integer numscope,const Standard_Integer numin) ;

//! Returns True if an Entity identified by its Number is in a Scope <br>
Standard_EXPORT   Standard_Boolean IsInScope(const Standard_Integer num) const;

//! Sends the complete Model, included HEADER and DATA Sections <br>
//!           Works with a WriterLib defined through a Protocol <br>
//!           If <headeronly> is given True, only the HEADER Section is sent <br>
//!           (used to Dump the Header of a StepModel) <br>
Standard_EXPORT   void SendModel(const Handle(StepData_Protocol)& protocol,const Standard_Boolean headeronly = Standard_False) ;

//! Begins model header <br>
Standard_EXPORT   void SendHeader() ;

//! Begins data section; error if EndSec was not set <br>
Standard_EXPORT   void SendData() ;

//! Send an Entity of the Data Section. If it corresponds to a <br>
//!           Scope, also Sends the Scope informations and contained Items <br>
Standard_EXPORT   void SendEntity(const Standard_Integer nument,const StepData_WriterLib& lib) ;

//! sets end of section; to be done before passing to next one <br>
Standard_EXPORT   void EndSec() ;

//! sets end of file; error is EndSec was not set <br>
Standard_EXPORT   void EndFile() ;

//! flushes current line; if empty, flushes it (defines a new <br>
//!           empty line) if evenempty is True; else, skips it <br>
Standard_EXPORT   void NewLine(const Standard_Boolean evenempty) ;

//! joins current line to last one, only if new length is 72 max <br>
//!           if newline is True, a new current line begins; else, current <br>
//!           line is set to the last line (once joined) itself an can be <br>
//!           completed <br>
Standard_EXPORT   void JoinLast(const Standard_Boolean newline) ;

//! asks that further indentations will begin at position of <br>
//!           entity first opening bracket; else they begin at zero (def) <br>
//!           for each sublist level, two more blancks are added at beginning <br>
//!           (except for text continuation, which must begin at true zero) <br>
Standard_EXPORT   void Indent(const Standard_Boolean onent) ;

//! begins an entity with an ident plus '=' (at beginning of line) <br>
//!           entity ident is its Number given by the containing Model <br>
//!  Warning : <ident> must be, either Number or Label, according LabelMode <br>
Standard_EXPORT   void SendIdent(const Standard_Integer ident) ;

//! sets a begin of Scope (ends this line) <br>
Standard_EXPORT   void SendScope() ;

//! sets an end of Scope  (on a separate line) <br>
Standard_EXPORT   void SendEndscope() ;

//! sets a comment mark : if mode is True, begins Comment zone, <br>
//!           if mode is False, ends Comment zone (if one is begun) <br>
Standard_EXPORT   void Comment(const Standard_Boolean mode) ;

//! sends a comment. Error if we are not inside a comment zone <br>
Standard_EXPORT   void SendComment(const Handle(TCollection_HAsciiString)& text) ;

//! same as above but accepts a CString (ex.: "..." directly) <br>
Standard_EXPORT   void SendComment(const Standard_CString text) ;

//! sets entity's StepType, opens brakets, starts param no to 0 <br>
//!           params are separated by comma <br>
//!           Remark : for a Multiple Type Entity (see Express ANDOR clause) <br>
//!           StartComplex must be called before sending componants, then <br>
//!           each "Componant" must be send separately (one call to <br>
//!           StartEntity for each one) : the Type which preceeds is then <br>
//!           automaticaly closed. Once all the componants have been sent, <br>
//!           EndComplex must be called, then and only then EndEntity <br>
Standard_EXPORT   void StartEntity(const TCollection_AsciiString& atype) ;

//! sends the start of a complex entity, which is a simple open <br>
//!           bracket (without increasing braket level) <br>
//!           It must be called JUST AFTER SendEntity and BEFORE sending <br>
//!           componants, each one begins by StartEntity <br>
Standard_EXPORT   void StartComplex() ;

//! sends the end of a complex entity : a simple closed bracket <br>
//!           It must be called AFTER sending all the componants and BEFORE <br>
//!           the final call to EndEntity <br>
Standard_EXPORT   void EndComplex() ;

//! Sends the content of a field, controlled by its descriptor <br>
//!           If the descriptor is not defined, follows the description <br>
//!           detained by the field itself <br>
Standard_EXPORT   void SendField(const StepData_Field& fild,const Handle(StepData_PDescr)& descr) ;

//! Sends a SelectMember, which cab be named or not <br>
Standard_EXPORT   void SendSelect(const Handle(StepData_SelectMember)& sm,const Handle(StepData_PDescr)& descr) ;

//! Send the content of an entity as being a FieldList controlled <br>
//!           by its descriptor. This includes start and end brackets but <br>
//!           not the entity type <br>
Standard_EXPORT   void SendList(const StepData_FieldList& list,const Handle(StepData_ESDescr)& descr) ;

//! open a sublist by a '(' <br>
Standard_EXPORT   void OpenSub() ;

//! open a sublist with its type then a '(' <br>
Standard_EXPORT   void OpenTypedSub(const Standard_CString subtype) ;

//! closes a sublist by a ')' <br>
Standard_EXPORT   void CloseSub() ;

//! prepares adding a parameter (that is, adds ',' except for <br>
//!           first one); normally for internal use; can be used to send <br>
//!           a totally empty parameter (with no litteral value) <br>
Standard_EXPORT   void AddParam() ;

//! sends an integer parameter <br>
Standard_EXPORT   void Send(const Standard_Integer val) ;

//! sends a real parameter (wroks with FloatWriter) <br>
Standard_EXPORT   void Send(const Standard_Real val) ;

//! sends a text given as string (it will be set between '...') <br>
Standard_EXPORT   void Send(const TCollection_AsciiString& val) ;

//! sends a reference to an entity (its identifier with '#') <br>
//!           REMARK 1 : a Null <val> is interpreted as "Undefined" <br>
//!           REMARK 2 : for an HAsciiString which is not recorded in the <br>
//!           Model, it is send as its String Content, between quotes <br>
Standard_EXPORT   void Send(const Handle(Standard_Transient)& val) ;

//! sends a Boolean as .T. for True or .F. for False <br>
//!           (it is an useful case of Enum, which is built-in) <br>
Standard_EXPORT   void SendBoolean(const Standard_Boolean val) ;

//! sends a Logical as .T. or .F. or .U. according its Value <br>
//!           (it is a standard case of Enum for Step, and is built-in) <br>
Standard_EXPORT   void SendLogical(const StepData_Logical val) ;

//! sends a string exactly as it is given <br>
Standard_EXPORT   void SendString(const TCollection_AsciiString& val) ;

//! sends a string exactly as it is given <br>
Standard_EXPORT   void SendString(const Standard_CString val) ;

//! sends an enum given by String (litteral expression) <br>
//!           adds '.' around it if not done <br>
//!           Remark : val can be computed by class EnumTool from StepData: <br>
//!             StepWriter.SendEnum (myenum.Text(enumval)); <br>
Standard_EXPORT   void SendEnum(const TCollection_AsciiString& val) ;

//! sends an enum given by String (litteral expression) <br>
//!           adds '.' around it if not done <br>
Standard_EXPORT   void SendEnum(const Standard_CString val) ;

//! sends an array of real <br>
Standard_EXPORT   void SendArrReal(const Handle(TColStd_HArray1OfReal)& anArr) ;

//! sends an undefined (optionnal absent) parameter (by '$') <br>
Standard_EXPORT   void SendUndef() ;

//! sends a "Derived" parameter (by '*'). A Derived Parameter has <br>
//!           been inherited from a Super-Type then redefined as being <br>
//!           computed by a function. Hence its value in file is senseless. <br>
Standard_EXPORT   void SendDerived() ;

//! sends end of entity (closing bracket plus ';') <br>
//!           Error if count of opened-closed brackets is not null <br>
Standard_EXPORT   void EndEntity() ;

//! Returns the check-list, which has received possible checks : <br>
//!           for unknown entities, badly loaded ones, null or unknown <br>
//!           references <br>
Standard_EXPORT   Interface_CheckIterator CheckList() const;

//! Returns count of Lines <br>
Standard_EXPORT   Standard_Integer NbLines() const;

//! Returns a Line given its rank in the File <br>
Standard_EXPORT   Handle_TCollection_HAsciiString Line(const Standard_Integer num) const;

//! writes result on an output defined as an OStream <br>
//!           then clears it <br>
Standard_EXPORT   Standard_Boolean Print(Standard_OStream& S) ;





protected:

 // Methods PROTECTED
 // 


 // Fields PROTECTED
 //


private: 

 // Methods PRIVATE
 // 

//! adds a string to current line; first flushes it if full <br>
//!           (72 char); more allows to ask a reserve at end of line : flush <br>
//!           is done if remaining length (to 72) is less than <more> <br>
Standard_EXPORT   void AddString(const TCollection_AsciiString& str,const Standard_Integer more = 0) ;

//! Same as above, but the string is given by CString + Length <br>
Standard_EXPORT   void AddString(const Standard_CString str,const Standard_Integer lnstr,const Standard_Integer more = 0) ;


 // Fields PRIVATE
 //
Handle_StepData_StepModel themodel;
Handle_TColStd_HSequenceOfHAsciiString thefile;
Interface_LineBuffer thecurr;
Standard_Boolean thesect;
Standard_Boolean thecomm;
Standard_Boolean thefirst;
Standard_Boolean themult;
Standard_Integer thelevel;
Standard_Boolean theindent;
Standard_Integer theindval;
Standard_Integer thetypmode;
Interface_FloatWriter thefloatw;
Interface_CheckIterator thechecks;
Standard_Integer thenum;
Standard_Integer thelabmode;
Handle_TColStd_HArray1OfInteger thescopebeg;
Handle_TColStd_HArray1OfInteger thescopeend;
Handle_TColStd_HArray1OfInteger thescopenext;


};





// other Inline functions and methods (like "C++: function call" methods)
//


#endif