1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
|
<?xml version="1.0" encoding="ISO-8859-1"?>
<PARAMETERS version="1.6.2" xsi:noNamespaceSchemaLocation="http://open-ms.sourceforge.net/schemas/Param_1_6_2.xsd" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<NODE name="PeakPickerHiRes" description="Finds mass spectrometric peaks in profile mass spectra.">
<ITEM name="version" value="2.1.0" type="string" description="Version of the tool that generated this parameters file." required="false" advanced="true" />
<NODE name="1" description="Instance '1' section for 'PeakPickerHiRes'">
<ITEM name="in" value="" type="input-file" description="input profile data file " required="true" advanced="false" supported_formats="*.mzML" />
<ITEM name="out" value="" type="output-file" description="output peak file " required="true" advanced="false" supported_formats="*.mzML" />
<ITEM name="processOption" value="THISVALUEISINVALID" type="string" description="Whether to load all data and process them in-memory or whether to process the data on the fly (lowmemory) without loading the whole file into memory first" required="false" advanced="true" restrictions="inmemory,lowmemory" />
<ITEM name="log" value="" type="string" description="Name of log file (created only when specified)" required="false" advanced="true" />
<ITEM name="debug" value="0" type="int" description="Sets the debug level" required="false" advanced="true" />
<ITEM name="threads" value="1" type="int" description="Sets the number of threads allowed to be used by the TOPP tool" required="false" advanced="false" />
<ITEM name="no_progress" value="false" type="string" description="Disables progress logging to command line" required="false" advanced="true" restrictions="true,false" />
<ITEM name="force" value="false" type="string" description="Overwrite tool specific checks." required="false" advanced="true" restrictions="true,false" />
<ITEM name="test" value="false" type="string" description="Enables the test mode (needed for internal use only)" required="false" advanced="true" restrictions="true,false" />
<NODE name="algorithm" description="Algorithm parameters section">
<ITEM name="signal_to_noise" value="1" type="double" description="Minimal signal-to-noise ratio for a peak to be picked (0.0 disables SNT estimation!)" required="false" advanced="false" restrictions="0:" />
<ITEM name="spacing_difference_gap" value="4" type="double" description="The extension of a peak is stopped if the spacing between two subsequent data points exceeds 'spacing_difference_gap * min_spacing'. 'min_spacing' is the smaller of the two spacings from the peak apex to its two neighboring points. '0' to disable the constraint. Not applicable to chromatograms." required="false" advanced="true" restrictions="0:" />
<ITEM name="spacing_difference" value="1.5" type="double" description="Maximum allowed difference between points during peak extension, in multiples of the minimal difference between the peak apex and its two neighboring points. If this difference is exceeded a missing point is assumed (see parameter 'missing'). A higher value implies a less stringent peak definition, since individual signals within the peak are allowed to be further apart. '0' to disable the constraint. Not applicable to chromatograms." required="false" advanced="true" restrictions="0:" />
<ITEM name="missing" value="1" type="int" description="Maximum number of missing points allowed when extending a peak to the left or to the right. A missing data point occurs if the spacing between two subsequent data points exceeds 'spacing_difference * min_spacing'. 'min_spacing' is the smaller of the two spacings from the peak apex to its two neighboring points. Not applicable to chromatograms." required="false" advanced="true" restrictions="0:" />
<ITEMLIST name="ms_levels" type="int" description="List of MS levels for which the peak picking is applied. Other scans are copied to the output without changes." required="false" advanced="false" restrictions="1:">
<LISTITEM value="1"/>
<LISTITEM value="2"/>
</ITEMLIST>
<ITEM name="report_FWHM" value="false" type="string" description="Add metadata for FWHM (as floatDataArray named 'FWHM' or 'FWHM_ppm', depending on param 'report_FWHM_unit') for each picked peak." required="false" advanced="false" restrictions="true,false" />
<ITEM name="report_FWHM_unit" value="relative" type="string" description="Unit of FWHM. Either absolute in the unit of input, e.g. 'm/z' for spectra, or relative as ppm (only sensible for spectra, not chromatograms)." required="false" advanced="false" restrictions="relative,absolute" />
<NODE name="SignalToNoise" description="">
<ITEM name="max_intensity" value="-1" type="int" description="maximal intensity considered for histogram construction. By default, it will be calculated automatically (see auto_mode). Only provide this parameter if you know what you are doing (and change 'auto_mode' to '-1')! All intensities EQUAL/ABOVE 'max_intensity' will be added to the LAST histogram bin. If you choose 'max_intensity' too small, the noise estimate might be too small as well. If chosen too big, the bins become quite large (which you could counter by increasing 'bin_count', which increases runtime). In general, the Median-S/N estimator is more robust to a manual max_intensity than the MeanIterative-S/N." required="false" advanced="true" restrictions="-1:" />
<ITEM name="auto_max_stdev_factor" value="3" type="double" description="parameter for 'max_intensity' estimation (if 'auto_mode' == 0): mean + 'auto_max_stdev_factor' * stdev" required="false" advanced="true" restrictions="0:999" />
<ITEM name="auto_max_percentile" value="95" type="int" description="parameter for 'max_intensity' estimation (if 'auto_mode' == 1): auto_max_percentile th percentile" required="false" advanced="true" restrictions="0:100" />
<ITEM name="auto_mode" value="0" type="int" description="method to use to determine maximal intensity: -1 --> use 'max_intensity'; 0 --> 'auto_max_stdev_factor' method (default); 1 --> 'auto_max_percentile' method" required="false" advanced="true" restrictions="-1:1" />
<ITEM name="win_len" value="200" type="double" description="window length in Thomson" required="false" advanced="false" restrictions="1:" />
<ITEM name="bin_count" value="30" type="int" description="number of bins for intensity values" required="false" advanced="false" restrictions="3:" />
<ITEM name="min_required_elements" value="10" type="int" description="minimum number of elements required in a window (otherwise it is considered sparse)" required="false" advanced="false" restrictions="1:" />
<ITEM name="noise_for_empty_window" value="1e+020" type="double" description="noise value used for sparse windows" required="false" advanced="true" />
<ITEM name="write_log_messages" value="true" type="string" description="Write out log messages in case of sparse windows or median in rightmost histogram bin" required="false" advanced="false" restrictions="true,false" />
</NODE>
</NODE>
</NODE>
</NODE>
</PARAMETERS>
|