File: ChangeLog

package info (click to toggle)
openocd 0.10.0-5
links: PTS, VCS
area: main
in suites: buster
size: 30,588 kB
sloc: ansic: 338,635; sh: 8,789; tcl: 7,352; asm: 2,470; cpp: 1,671; makefile: 1,401; python: 897; perl: 743; xml: 77; haskell: 35
file content (24770 lines) | stat: -rw-r--r-- 1,313,068 bytes
2017-01-22  Paul Fertser <fercerpav@gmail.com>

	* : The openocd-0.10.0 release Signed-off-by: Paul Fertser <fercerpav@gmail.com>

2017-01-19  Matthias Welwarsky <matthias.welwarsky@sysgo.com>

	* : arm_dpm: avoid duplicating the register cache This bug was already attempted to fix in an earlier patch but
	merging the "defer-examine" feature caused a regression, which this
	patch tries to fix again.  Change-Id: Ie1ad1516f0d7f130d44e003d6c29dcc1a02a82ca Signed-off-by:
	Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on:
	http://openocd.zylin.com/3951 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2017-01-15  Paul Fertser <fercerpav@gmail.com>

	* : The openocd-0.10.0-rc2 release candidate Signed-off-by: Paul Fertser <fercerpav@gmail.com>

2017-01-07  Paul Fertser <fercerpav@gmail.com>

	* : jtag: core: report TRST and SRST as asserted only when they
	really are When SRST is never enabled, the global jtag_srst variable is left at
	its initial state, that is, -1, and it does _not_ mean SRST is
	currently asserted. Same about TRST.  Fixes "reset halt" in cases when srst_pulls_trst but srst usage is
	not enabled.  Change-Id: I8d2e9120479de4cfbf5561033926c9ef945eecc9 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3943 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz>

2017-01-07  Tomas Vanek <vanekt@fbl.cz>

	* : tcl at91samdXX.cfg: partially revert change 3722 Commit 25d7ba19c9e70cf5b912f660cf6aaa93d9ca120f introduced a problem
	with 'reset halt' due to setting srst_pulls_trst: Error: cortex_m.c:595 cortex_m_halt(): can't request a halt while   in reset if nSRST pulls nTRST Sorry, I don't know why I overlooked it when I tested #3722.  Change-Id: I41e9473dd91a86d93cf3e78b1fbbdfe1dd188d83 Reported-by:
	Ladislav Laska <laska@kam.mff.cuni.cz> Signed-off-by: Tomas Vanek
	<vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3942
	Tested-by: jenkins Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2017-01-03  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : doc: Improve ftdi driver section Fix typo and a sentence that sounds strange since the ft2232 driver
	was removed.  Add documentation for the SWD signal usage.  Remove the text mentioning a default VID:PID which doesn't exist.  Change-Id: I27eba571f2f7c46bdb6ae623ab285595018e99d9 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3935 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-12-25  Paul Fertser <fercerpav@gmail.com>

	* : jtag: drivers: build usb_blaster only if enabled Fix build failure when libusb dev files are not available and so
	usb_blaster is disabled.  Change-Id: I4cda7df689cdb4b62b733cbbab813241cf561e29 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3920 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-12-25  Paul Fertser <fercerpav@gmail.com>

	* : Restore -dev suffix Signed-off-by: Paul Fertser <fercerpav@gmail.com>

2016-11-04  Paul Fertser <fercerpav@gmail.com>

	* : NEWS: prepare for new release Change-Id: I141ff17f6dcab7e164a19c91b975ddd455d26dbc Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3854 Tested-by: jenkins

2016-07-20  Paul Fertser <fercerpav@gmail.com>

	* : doc: add a cross-reference to GDB threading commands Change-Id: If4766ba0053fc94cd47495e442fcf288241af218 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3557 Tested-by: jenkins

2016-11-30  Paul Fertser <fercerpav@gmail.com>

	* : tcl: target: imx5{1,3}: remove bogus tapenable command This seems to be a leftover from borrowing from omap3* configs.
	Since SJC is not enabling or disabling the DAP tap, and the tap is
	always available, the extra tapenable command causes warnings on
	startup (can't enable what's already enabled).  Change-Id: I7514436d565aa5b91876dbdab547956f36dcab77 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3892 Tested-by: jenkins

2016-12-10  Paul Fertser <fercerpav@gmail.com>

	* : README: fix a typo Change-Id: I1ad1ba001f8fad0fffa9b6bd5b21dd58be4f6181 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3902 Tested-by: jenkins Reviewed-by:
	Chengyu Zheng <chengyu.zheng@polimi.it>

2016-08-16  Paul Fertser <fercerpav@gmail.com>

	* : jimtcl: update to 0.77, the current version, enable only
	specific modules This is needed to fix build on aarch64 to get updated config.guess.  Because some newer JimTcl modules that get enabled are failing to
	build on some of the platforms OpenOCD supports, enable only a fixed
	set that shouldn't cause any issues.  We also disable running Jim Tcl tests on distcheck because they
	never worked (before 85358e479e5bbf295a5aaf743f3c29a5e1a4fd1c Jim
	commit) but didn't break Jenkins build; with newer version they're
	getting run and fail due to limited permissions for filesystem and
	networking operations.  Change-Id: I0b6c6a00bf2cf0902bbb01c9c0224fe93c74ac94 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3700 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-12-13  Paul Fertser <fercerpav@gmail.com>

	* : jtag: drivers: ulink: fix uninitialised variable warning This prevents clean build when --enable-verbose-jtag-io is used.  Change-Id: I5c9e6968cfa425b1f6f92f59156b6ae38cb9af18 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3907 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-11-14  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : stm32l0.cfg: Add examine-end event like on other STM32 targets.  Enable debug in standby/stop/sleep.  Stop watchdogs during halt.  Change-Id: I8383a191cd897118bd88bf78528d05943f3a368e Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/3882 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-11-18  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : Deprecate ZY1000, ioutils and oocd_trace These have not been maintained for a very long time so I say it's
	time we remove them.  Change-Id: Ic091978d734be09347e271736df0f7f7f9095243 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3885 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-11-06  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : Convert to non-recursive make Change-Id: I11f8bc8553957e2ff083c09e72e16881e4d3bb6f Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3865 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-11-06  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : configure: Don't set user variables CFLAGS is a user variable and shouldn't be set in either
	configure.ac or Makefile.am because that makes it impossible to
	override compiler flags at configure or make time.  AC_SUBST the default warning flags into AM_CFLAGS instead, which is
	emitted before CFLAGS on the compiler command line.  Do the same thing with a mingw-specific flag as well.  Change-Id: I6ac3a3c8b7e0abf6f0e60ea239b549d68ea6d370 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3870 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-11-06  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : configure: Use same case for libjaylink as for other libs Change-Id: I60d91a0543d9b8c580254cdc5f04b2e60209b98b Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3868 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-08-13  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : target: Replace malloc+manual zeroing with calloc Change-Id: I3c782c34b59cb36b8ca1d36e9c804c67bae5cb45 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3667 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-11-18  Marc Schink <openocd-dev@marcschink.de>

	* : jlink: Output libjaylink version Output the package version of libjaylink to ease debugging.  Change-Id: I3b9da6d046d140ba850056c98e67bed22c885ee0 Signed-off-by:
	Marc Schink <openocd-dev@marcschink.de> Reviewed-on:
	http://openocd.zylin.com/3887 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-09-30  Marc Schink <openocd-dev@marcschink.de>

	* : jlink: Add EMUCOM support EMUCOM is a way to communicate with a J-Link device via so called
	channels. A channel can either be read or written in a single
	operation.  Beside the reserved channels for SEGGER, there are channels
	available to implement vendor and/or device specific
	functionalities. For example, EMUCOM is used on many starter and
	development kits from Silicon Labs to access power measurements and
	various other information and settings.  Change-Id: I6094109c043b34aed4a40ceabe71f30ff896bf1d Signed-off-by:
	Marc Schink <openocd-dev@marcschink.de> Reviewed-on:
	http://openocd.zylin.com/3794 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-11-02  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : xscale: Move debug handler to contrib/loaders Avoid special rules to generate array at compile time by shipping
	the generated file. Convert to Makefile build like the other
	loaders.  Change-Id: I5a05edddcfaff3d395086cd3aa33120f8a7aa9dc Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3864 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-11-04  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : Remove build date from banner for releases In support for reproducible builds, see
	https://wiki.debian.org/ReproducibleBuilds Fixes Debian bug #834316.  Change-Id: Id81ec72a87bf6dd99abfd2a0ae074658111bc9a3 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3866 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-02-15  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : configure: Remove conflicting CMSIS_DAP conditional It's already defined by PROCESS_ADAPTERS.  Change-Id: I3bbcb0f77c645e9c5a98c2d5069c178358d1516b Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3239 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-11-13  Matthias Welwarsky <matthias.welwarsky@sysgo.com>

	* : cortex_m: allow setting debug ap during create This patch adds a Cortex-M private configuration option that allows
	setting the acess point during target creation. This circumvents
	situations in hybrid systems when the correct access point can not
	be automatically detected.  Change-Id: If313a5250e6e66509bb9080f3498feab7781dced Signed-off-by:
	Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on:
	http://openocd.zylin.com/3639 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-05-22  Marc Schink <openocd-dev@marcschink.de>

	* : helper: Code cleanup for hexify() Simplify hexify() and do not longer use 0 as special case for the
	parameter 'count' to determine the string length of the binary
	input.  Instead, use strlen() outside of the function if needed.
	Additionally, fix the return value and return the length of the
	converted string. The old function always returned 2 * count.  Also, use more appropriate data types for the function parameters
	and add a small documentation.  Change-Id: I133a8ab786b8f7c1296afcaf9c0a0b43881e5112 Signed-off-by:
	Marc Schink <openocd-dev@marcschink.de> Reviewed-on:
	http://openocd.zylin.com/3793 Tested-by: jenkins Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz>

2016-07-20  Steven Stallion <stallion@squareup.com>

	* : gdb_server: support qXfer:threads:read packet This patch adds support for the qXfer:threads:read packet. In
	addition to providing a more efficient method of updating thread
	state, recent versions of GDB (7.11.1 and up) can also report remote
	thread names.  While thread names are not enabled in this patch due
	to its limited applicability at the moment, it can be enabled at a
	later date with little effort.  As a part of revamping how threads are presented to GDB, extra info
	strings for each of the supported RTOSes were updated to match
	conventions present in the GDB source code. For more information,
	see remote_threads_extra_info() in remote.c. This results in a much
	smoother experience when interacting with GDB.  It is also worth mentioning that use of qXfer:threads:read works
	around a number of regressions in older versions of GDB regarding
	remote thread display. Trust me, it's great.  Change-Id: I97dd6a93c342ceb9b9d0023b6359db0e5604c6e6 Signed-off-by:
	Steven Stallion <stallion@squareup.com> Reviewed-on:
	http://openocd.zylin.com/3559 Tested-by: jenkins Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2016-10-25  Owen Kirby <oskirby@gmail.com>

	* : at91sam4: Add missing SAM4S family CHIPIDs and remove FWS=6.  Add missing CHIPID values for all SAM4S parts listed in revision K
	of Atmel-11100-32-bit Cortex-M4-Microcontroller-SAM4S_Datasheet.pdf.
	I have also removed the FWS=6 workaround, as this appears to be a
	copy-paste error from the SAM3X family.  Change-Id: I1ce1d82911f39d6fcb8f04034f5c9c9bf2818466 Signed-off-by:
	Owen Kirby <oskirby@gmail.com> Signed-off-by: Tomas Vanek
	<vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3837
	Tested-by: jenkins

2016-11-04  Paul Fertser <fercerpav@gmail.com>

	* : jtag: drivers: cmsis-dap: fix operation with SAMD10 Xplained
	board Change-Id: I9164edeb83c9a9106e74798e98b9517177e83358 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3856 Tested-by: jenkins Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz>

2016-01-12  Evan Hunter <ehunter@broadcom.com>

	* : Cortex-R: Force usage of physical memory read/write since there
	is no MMU Change-Id: I69d6e6301ab66744258fe650a76c7241bebe00a8 Signed-off-by:
	Evan Hunter <ehunter@broadcom.com> Reviewed-on:
	http://openocd.zylin.com/3203 Tested-by: jenkins Reviewed-by: Girts
	Folkmanis <opensource@girts.me> Reviewed-by: Matthias Welwarsky
	<matthias@welwarsky.de> Reviewed-by: Jiri Kastner
	<cz172638@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>

2016-11-10  Matthias Welwarsky <matthias.welwarsky@sysgo.com>

	* : target: Add verify_image_checksum command This avoids the secondary binary search if the checksum is different Change-Id: I986ba7687cea76f30e37a6bca58aabde18198263 Signed-off-by:
	Evan Hunter <ehunter@broadcom.com> Signed-off-by: Matthias Welwarsky
	<matthias.welwarsky@sysgo.com> Reviewed-on:
	http://openocd.zylin.com/2869 Tested-by: jenkins Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2016-11-11  Andreas Frber <afaerber@suse.de>

	* : xmc4xxx: Add support for XMC4300 XMC4300 can reuse the existing XMC4700/XMC4800 sectors support.  Add
	support for XMC4300 AA to the info command.  Change-Id: Id929a51d20c73bd869a4457ffedc48ad5fa3f2df Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3875 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-11-23  Matthias Welwarsky <matthias.welwarsky@sysgo.com>

	* : cortex_a: remove partnum magic from arp_examine and dbginit Depending on the Debug implementation the "OS Lock" feature might be
	implemented or not. It is not actually depending on the part number
	of the implemented ARM core but on the DBGOSLSR.OSLM bits. This
	patch removes querying the part number and implements proper parsing
	of OSLM. Result is a more generic approach that will work out-of-box
	on more devices.  Change-Id: I79e052869c2f9af1d7fdedef42faddb7292e7332 Signed-off-by:
	Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on:
	http://openocd.zylin.com/3213 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-11-27  Peter Lawrence <majbthrd@gmail.com>

	* : tcl: Support for Analog Devices ADSP-SC58x target tcl to enable debugging of ARM Cortex-A5 on ADSP-SC58x Change-Id: I378f8b94b7d6d6b9d0567985abc0e36aea7c8dea Signed-off-by:
	Peter Lawrence <majbthrd@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3125 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Matthias
	Welwarsky <matthias@welwarsky.de>

2016-08-24  Tomas Vanek <vanekt@fbl.cz>

	* : tcl at91samdXX.cfg: update config to current OpenOCD status Remove comment about workaround of not working 'reset halt' - not
	needed as 'reset halt' is working as expected @ EDBG with srst_only.
	Add srst_pulls_trst to reset_config as it no more triggers an error.  Change-Id: I47cf445690c46ccfb866900cddbfcaefc8649f82 Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/3722 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-02-15  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : Remove since long deprecated ft2232 driver Purge all legacy interface configurations so there's no more
	confusion over which one to use.  Also remove doc/INSTALL.txt which mentions ft2232 but otherwise just
	duplicates what INSTALL says.  Change-Id: Ic94f808f123d4917e600b79309f1272c78a7bb11 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3236 Tested-by: jenkins Reviewed-by:
	Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2016-06-11  Marc Schink <openocd-dev@marcschink.de>

	* : configure.ac: Fix J-Link adapter description The J-Link driver is not JTAG only and the correct spelling of the
	company is "SEGGER".  Change-Id: Ic1062247d3bf0d564960f1ac6dfc86ffb34593e0 Signed-off-by:
	Marc Schink <openocd-dev@marcschink.de> Reviewed-on:
	http://openocd.zylin.com/3530 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-06-06  Marc Schink <openocd-dev@marcschink.de>

	* : configure.ac: Fix libjaylink integration Do not configure internal libjaylink if libusb-1.0 is not available
	or if J-Link driver is disabled (--disable-jlink).  Change-Id: I021bca91dbbc33888a997c664f7836225306c3ef Signed-off-by:
	Marc Schink <openocd-dev@marcschink.de> Reviewed-on:
	http://openocd.zylin.com/3528 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-07-27  Tomas Vanek <vanekt@fbl.cz>

	* : flash at91samd, at91sam4l: fix improper use of mem_ap_ call Since merge of #3149 OpenOCD start with an unresponsive SAMD or
	SAM4L resulted in segfaults. First was in cortex_m_assert_reset
	(fixed by #3552), second was in samd_handle_reset_deassert()
	/sam4l_handle_reset_deassert().  The change replaces mem_ap_write_u32/8 by target_write_u32/8.  It
	also takes better care about examining and polling target before
	debug control registers are set. It prevents lockup when 'reset
	halt' is issued on unresponsive cpu.  Change-Id: I2516489f4771aebfc1118d174f527497b8a201ad Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/3603 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-08-02  Tomas Vanek <vanekt@fbl.cz>

	* : flash Kinetis: Family K8x added Change-Id: I8c090a6fe6c204ce20622006490f896c2a55292f Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/3614 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2016-07-22  Tomas Vanek <vanekt@fbl.cz>

	* : flash Kinetis: longword programming changed to
	flash_async_algorithm Change-Id: I9c40acfad37760c3dab454f2432817b2d420792d Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/3563 Reviewed-by: Steven Stallion
	<stallion@squareup.com> Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2016-03-30  Harald Welte <laforge@gnumonks.org>

	* : AM335x: Disable watchdog on 'reset halt' At least on my (phyCORE-AM335X) system, the AM335x watchdog needs to
	be disabled to use OpenOCD for more than 6.5 seconds after reset.  Change-Id: I3d883a9f572b0ccb92f9864853a00c372e39d7f2 Signed-off-by:
	Harald Welte <laforge@gnumonks.org> Reviewed-on:
	http://openocd.zylin.com/3391 Tested-by: jenkins Reviewed-by: Tom
	Rini <trini@konsulko.com> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2014-12-09  HarishKumar <harishpresent@gmail.com>

	* : Tcl commands: Fix improper return status in flash commands and
	load_image.  Nand write command : nand_fileio_cleanup() always returns ERROR_OK.
	Due to this, handle_nand_write_command() retuns ERROR_OK in the case
	of nand failure. ERROR_FAIL should be returned.  Flash erase_sector command : handle_flash_erase_command() always
	returns ERROR_OK even if the erase functionality of actual driver
	implementation fails.  retval value should be returned.  Flash write_bank command : handle_flash_write_bank_command() returns
	ERROR_OK even if fileio_open() and fileio_read fails. ERROR_FAIL
	should be returned.  Load_image command : handle_load_image_command() retuns ERROR_OK
	even if image_open() fails. ERROR_FAIL should be returned.  When the
	buffer is null, breaking the loop without setting retval =
	ERROR_FAIL would cause load_image to return ERROR_OK.  Change-Id: Ice32f6036971ab5e8e4dd65edf54b394b001c80c Signed-off-by:
	HarishKumar <harishpresent@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2431 Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Tested-by: jenkins

2016-07-25  Rick Foos <rfoos@solengtech.com>

	* : tcl/board: Add board configuration for nRF51-DK, and nRF52-DK.  Both boards use SEGGER interface.  nRF52 flash driver is in change 3511.  The board files were needed for transport select to SWD. The default
	jtag transport didn't failover to SWD.  Change-Id: Id9c72aa88eeeb6a4e1999ee182f5284dbe535c05 Signed-off-by:
	Rick Foos <rfoos@solengtech.com> Reviewed-on:
	http://openocd.zylin.com/3600 Tested-by: jenkins Reviewed-by:
	Fredrik Hederstierna <fredrik.hederstierna@gmail.com> Reviewed-by:
	Michael Dietz <mjdietzx@gmail.com> Reviewed-by: Jiří Pinkava
	<j-pi@seznam.cz> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2016-09-09  Jiří Pinkava <j-pi@seznam.cz>

	* : nrf51: show proper part number Change-Id: I3e8169eb577888ee54541a1e864a8ad5a9a7cfd1 Signed-off-by:
	Jiří Pinkava <j-pi@seznam.cz> Reviewed-on:
	http://openocd.zylin.com/3733 Tested-by: jenkins Reviewed-by:
	Fredrik Hederstierna <fredrik@hederstierna.com> Reviewed-by: Michael
	Dietz <mjdietzx@gmail.com> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2016-10-05  Paul Fertser <fercerpav@gmail.com>

	* : flash: nor: lpc2000: handle lpc11xx parts with more than 96k
	memory Known big flash parts such as LPC11u68/e68 have a non-uniform memory
	organisation, the first 24 sectors are 4k, the rest are 32k.  Change-Id: Icf515152dfc54ec0ca187561d2d63088b9640f14 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3802 Tested-by: jenkins Reviewed-by:
	akaWolf Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

2016-10-21  Gabrielle Trotter <gtrotter@bulogics.com>

	* : atsamv: Support for ATSAMS70N19 Memory Configuration Change-Id: I3c17fcb7ee053f92aa583149bea7b8e33b3b86f7 Signed-off-by:
	gtrotter@bulogics.com Reviewed-on: http://openocd.zylin.com/3834
	Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

2016-08-21  Andreas Frber <afaerber@suse.de>

	* : target: Clean up format strings Clean up some type casts and misuses of format specifiers in
	preparation for target address type changes.  Change-Id: Idf08286f41bca636e35a09e8ddc1d71af3d6e151 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3717 Tested-by: jenkins Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz>

2016-08-21  Andreas Frber <afaerber@suse.de>

	* : breakpoints: Add missing space in error message A space after the format specifier was missing.  Change-Id: Ib67eb0fb0d6e05d765206d30d5e4a74cb41bb47b Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3715 Tested-by: jenkins Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz>

2016-10-04  Paul Fertser <fercerpav@gmail.com>

	* : jtag: drivers: mpsse: ignore error to detach kernel driver This makes it possible to run OpenOCD as unprivileged user on
	FreeBSD.  Change-Id: If1182d09ad2d51f370ae7e6da02f19c7a21c66c9 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3800 Tested-by: jenkins Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz>

2016-08-21  Tomas Vanek <vanekt@fbl.cz>

	* : flash Kinetis: fix mdm check_security regression in JTAG mode Commit 6d5b4d709cb05e8daf0350ac507b928da95d0abb causes failed assert
	when JTAG transport is selected: src/target/arm_adi_v5.h:346: dap_queue_ap_read:   Assertion `ap->dap->ops != ((void *)0)' failed.  As check_security runs early in examine-start event, dap->ops must
	be checked.  Change-Id: Ibd8312a3c668fbce834eed9790eabeed794117aa Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/3712 Tested-by: jenkins Reviewed-by:
	Andreas Färber <afaerber@suse.de> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2016-06-28  Sean Cross <xobs@kosagi.com>

	* : tcl/board: add configuration for Novena's integrated FPGA Change-Id: Iecd57c0ef59cfde98de36464a73436f57b0835e2 Signed-off-by:
	Sean Cross <xobs@kosagi.com> Signed-off-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3532
	Tested-by: jenkins Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2016-05-15  Marc Schink <openocd-dev@marcschink.de>

	* : libjaylink: Update for API changes Update to latest libjaylink version and incorporate API changes.  The major change in libjaylink is a rework of the device discovery.
	Please test device discovery extensively, especially with multiple
	devices connected. All other changes in libjaylink are of minor
	importance for OpenOCD.  Change-Id: I9a50e83f59557505ce29809c7762c5df1cec10eb Signed-off-by:
	Marc Schink <openocd-dev@marcschink.de> Reviewed-on:
	http://openocd.zylin.com/3735 Reviewed-by: Andreas Färber
	<afaerber@suse.de> Reviewed-by: Steven Stallion
	<stallion@squareup.com> Tested-by: jenkins Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2016-08-18  Marc Schink <openocd-dev@marcschink.de>

	* : helper/log: Add log_vprintf_lf() Add log_vprintf_lf() to enable the possibility to output log
	messages with a variable argument list.  Change-Id: I7fd6e93db63a7d98f662df2881a42e4d923c3848 Signed-off-by:
	Marc Schink <openocd-dev@marcschink.de> Reviewed-on:
	http://openocd.zylin.com/3709 Tested-by: jenkins Reviewed-by:
	Andreas Färber <afaerber@suse.de> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2016-10-04  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : stm32f2x: Increase options write timeout Large flash parts time out when unlocking. Mass erase time is
	specified as 32 seconds worst case for some parts. Automatic mass
	erase is probably not using x8 parallelism, though, but a too large
	timeout shouldn't hurt.  Also, use the new define instead of hardcoded timeout when mass
	erasing.  Change-Id: Ib5af60d52ed7d53277bfe7176c4c44f79d3a26bc Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3738 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2016-05-30  Michael Dietz <mjdietzx@gmail.com>

	* : nRF51: Fix bug in Code memory size.  The code memory size was a bug and seemed to be working by accident
	since there happened to be 256 pages in the device that was tested
	on which corresponded to 256kb.  Also don't fail if memory size != expected memory size based on hwid
	as this hwid is unstable and should be used only for
	debug/diagnostics.  Change-Id: I4e98f7498a36c53fc51783eddfdaba704d30e3ca Signed-off-by:
	Michael Dietz <mjdietzx@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3510 Tested-by: jenkins Reviewed-by: Jiří
	Pinkava <j-pi@seznam.cz> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>

2016-08-14  Andreas Frber <afaerber@suse.de>

	* : nds32: Fix typo in debug log wathcpoint -> watchpoint Change-Id: If84cfb5097ed17ef97491667c622ba7d870ac9c2 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3673 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-10-21  Kent Brinkley <jkbrinkley.imgtec@gmail.com>

	* : mips: Added #define for scan_delay legacy mode default value Believe in using defines to make maintenance easier.  Change-Id: I8edf151352131bbf2b884dfcd67ca5764b11b13c Signed-off-by:
	Kent Brinkley <jkbrinkley.imgtec@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2350 Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Tested-by: jenkins

2016-10-04  Spencer Oliver <spen@spen-soft.co.uk>

	* : stm32l4x: fix incorrect device id mask Change-Id: I37cf9cbdd07dc3764d2c719b7c6ed5852aea3943 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/3799 Tested-by: jenkins

2016-07-22  Tomas Vanek <vanekt@fbl.cz>

	* : flash Kinetis: Implement flash protection setting Kinetis family employs strange concept of Flash Configuration Field
	at address 0x400 of program flash. Writing incorrect data to FCF may
	permanently lock the device.  The change introduces 'kinetis fcf_source protection' mode. In this
	mode write of flash image data to FCF is prevented. FCF data build
	from protection (set by 'flash protect' command) are written
	instead.  FCF data are written also just after erase of relevant sector. It
	protects device from locking security by reset or power cycle after
	erase.  prot_blocks array is used as protection blocks have bigger size than
	sectors.  Alignment and padding programming sections is rewritten to fix
	writing with not section boundary aligned begin.  Change-Id: I9fc8bd37d6f627fb8ed7abb7f7560e78a740b195 Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/3562 Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Tested-by: jenkins

2016-07-22  Tomas Vanek <vanekt@fbl.cz>

	* : flash Kinetis: refactoring ftfx commands and numerous minor
	changes Add kinetis_ftfx_decode_error() to show flash error type in human
	readable message.  Add kinetis_ftfx_prepare() to prepare flash module just once in
	command (not each time kinetis_ftfx_command() is called).  Change target_read/write_memory() to target_read/write_u8/32().  Make ftfx_fstat parameter of kinetis_ftfx_command() optional.  Longword flash write: Fix huge memory leak after write of unaligned
	block.  Check flash address alignment properly.  Do not fill whole
	padding buffer but its end after original data.  Remove duplicite
	padding.  Change-Id: Ia5e312909f68d3cc724c8cbffe1cd903b9102124 Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/3561 Tested-by: jenkins Reviewed-by: Steven
	Stallion <stallion@squareup.com> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2016-07-19  Tomas Vanek <vanekt@fbl.cz>

	* : flash Kinetis: dynamic status detection before starting
	mass_erase The change prevents starting mass_erase in unstable state of MCU
	(RESET/WDOG loop).  mass_erase of secured MCU using manual reset
	button is supported.  Timeouts are measured by timeval_ms() instead
	of iteration count.  mass_erase timeout prolonged to 16 seconds
	because aborting mass_erase in progress (deasserting reset) leaves
	the device in security locked state.  Change-Id: I6605532df56080a54c2a1dfe49094e3db4ce534a Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/3551 Tested-by: jenkins Reviewed-by: Steven
	Stallion <stallion@squareup.com> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2016-07-09  Steven Stallion <stallion@squareup.com>

	* : kinetis: support mass erase on boards without SRST NXP (nee Freescale) documents the mass erase procedure using the
	MDM-AP block in AN4835. Existing support for this feature did not
	properly handle boards without SRST. This patch updates the
	mass_erase command such that it works correctly on these boards.
	Additionally, the core is left in a halted state once complete to
	prevent reset loops due to the watchdog as reported by some users.  Since the MDM-AP provides an additional method of halting and
	resetting the core that is disconnected from the DAP, additional
	commands are provided to manage this state. These commands are
	particularly helpful when connecting to a target with an unknown
	state.  Change-Id: I40f006d5d964befb12b019c5d509988decdd3f91 Signed-off-by:
	Steven Stallion <stallion@squareup.com> Reviewed-on:
	http://openocd.zylin.com/3540 Tested-by: jenkins Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz>

2015-02-25  Stephen Tridgell <stephen.tridgell@exablaze.com>

	* : ftdi: Added a method to read the signal values Change-Id: Ie32a372bbc57249b4802d900234a0e8e7d1d1830 Signed-off-by:
	Stephen Tridgell <stephen.tridgell@exablaze.com> Reviewed-on:
	http://openocd.zylin.com/2556 Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Tested-by: jenkins

2016-08-01  Antony Pavlov <antonynpavlov@gmail.com>

	* : tcl/board: add Marsohod CPLD board config Marsohod is a very cheap CPLD Development and Education board.
	Please see http://marsohod.org/howtostart/plata for details.  Sample usage:   openocd -f board/marsohod.cfg -c init -c "svf -tap epm240.tap
	  project.svf" -c shutdown Change-Id: Ia8b7d46cbead15a2a41a2a4e68d7ff4f4ee3e88a Signed-off-by:
	Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3608 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2015-09-28  Antony Pavlov <antonynpavlov@gmail.com>

	* : tcl/board: add Marsohod3 FPGA board config Marsohod3 is a cheap FPGA Development and Education board.  Please
	see http://www.marsohod.org/plata-marsokhod3 for details.  Sample usage:   openocd -f board/marsohod3.cfg -c init -c "svf -tap 10m50.tap
	  project.svf" -c shutdown Change-Id: Ie5f43e696bbd1f3be2710c3916e808359f6e8d18 Signed-off-by:
	Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3606 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2015-07-28  Antony Pavlov <antonynpavlov@gmail.com>

	* : tcl/board: add Marsohod2 FPGA board config Marsohod2 is a very cheap FPGA Development and Education board.
	Please see http://www.marsohod.org/prodmarsohod2 for details.  Sample usage:   openocd -f board/marsohod2.cfg -c init -c "svf -tap ep3c10.tap
	  project.svf" -c shutdown Change-Id: Ibf39a5d463eeda9d4031fa626f01ea2599396ff2 Signed-off-by:
	Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2890 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-09-27  Antony Pavlov <antonynpavlov@gmail.com>

	* : tcl/interface/ftdi: add config for the MBFTDI adapter MBFTDI is a very cheap FT2232-based JTAG adapter for programming
	Marsohod FPGA board.  Please see http://www.marsohod.org/prodmbftdi for details.  Change-Id: I35f758b49d1566098dc27f9581829cccad93ceeb Signed-off-by:
	Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3604 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-08-10  Peter A. Bigot <pab@pabigot.com>

	* : gdb_server: support disabling server Although the documentation suggested this worked, and it is
	implemented for tcl_port and telnet_port, the directive was not
	recognized for gdb_port.  Change-Id: I38d95ee879ec3f6d551603b7313749a21e0e498e Signed-off-by:
	Peter A. Bigot <pab@pabigot.com> Reviewed-on:
	http://openocd.zylin.com/3637 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-07-20  Steven Stallion <stallion@squareup.com>

	* : rtos: remove display_str member This patch removes the display_str member in the thread_detail
	struct.  This member was not being used and provides no additional
	benefit over the thread_name_str and extra_info_str members. This
	change is made in preparation of support for the qXfer:threads:read
	packet, which will modernize how thread information is shared with
	GDB.  Change-Id: I1f8bc6325e6aa790e02ea6caee9d6f44c5fedf36 Signed-off-by:
	Steven Stallion <stallion@squareup.com> Reviewed-on:
	http://openocd.zylin.com/3558 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-05-21  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : flash/nor/tcl.c: Less verbose output of flash erase_check.  Only report non-erased or unknown sectors or if bank is fully
	erased.  Change-Id: I94f0bc2a0d6529d1ea5f66b284cefd6a2c61fe39 Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/3501 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by:
	Andreas Färber <afaerber@suse.de>

2016-02-09  Matthias Welwarsky <matthias.welwarsky@sysgo.com>

	* : board: add configuration for freescale imx6q sabresd board This configuration file contains jtag, reset and init functions for
	the Freescale SabreSD board variant with iMX6Q SoC.  Change-Id: I2366af6da1d82550eb485f36ad61469305c59ffb Signed-off-by:
	Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on:
	http://openocd.zylin.com/3357 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2016-03-02  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : tcl/target/stm32f4x.cfg: Use Workareasize of smallest possible
	device.  Increase workareasize when it is know we have a larger device.  Change-Id: Ieaee92e7cd25cc201989f14de122349698871412 Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/3378 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-07-21  Tomas Vanek <vanekt@fbl.cz>

	* : target: check late abort from target in async_algorithm target_run_flash_async_algorithm() ignored abort from target (rp set
	to 0) when raised after all data have been written in fifo.  I could
	result e.g. in not reported error during flash write.  The change adds rp test after target algorithm has finished.  Change-Id: Iadd93371e4a4602737be10079479285d81ae41b2 Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/3560 Tested-by: jenkins Reviewed-by: Steven
	Stallion <stallion@squareup.com> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2016-02-28  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : tcl/target/stm32l4x.cfg: Reduce adapter speed before reset.  Change-Id: I200286c0b980369f74e8f1e497bc5e565ddb616d Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/3366 Tested-by: jenkins Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz>

2016-05-22  Andreas Frber <afaerber@suse.de>

	* : kinetis_ke: Switch to standard build variables Instead of using ARM_ prefixed variables and an "arm" target, use
	CROSS_COMPILE, AS, OBJCOPY. This requires to switch from ?= to = to
	avoid the host assembler getting invoked.  This allows to handle kinetis_ke subdirectory like fm4 and xmc1xxx.  Change-Id: I7ea0bf119f6c4716f4d6002794004730af49eef4 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3505 Tested-by: jenkins Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz>

2016-08-06  Tomas Vanek <vanekt@fbl.cz>

	* : psoc4.cfg: fixed typo in message, add a hint PSoC4 design prevents reset halt/init with standard/low level SWD
	adapter if hw reset line configured. Give user hint to use
	'reset_config none' in such case.  Change-Id: I0ca2c46b8575829b0013fd151f2eb63963d66653 Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/3617 Tested-by: jenkins Reviewed-by:
	Andreas Färber <afaerber@suse.de> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2016-08-10  Felix Held <felix-openocd@felixheld.de>

	* : xilinx-xc7: correct Artix7 15T IDCODE The IDCODE of Artix7 15T in the UG470 is wrong; Artix7 35T and 15T
	don't have the same IDCODE.  I've tested this on real hardware.  Change-Id: Iac267dc449c23454dd119126749dbeb8267c18ac Signed-off-by:
	Felix Held <felix-openocd@felixheld.de> Reviewed-on:
	http://openocd.zylin.com/3633 Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Tested-by: jenkins

2016-03-02  Matthias Welwarsky <matthias.welwarsky@sysgo.com>

	* : target: add "phys" argument to mem2array, array2mem Allow using physical addresses with mem2array and array2mem. In
	order to minimize the impact on existing scripts, "phys" is added as
	an optional 5th parameter to both commands.  This patch also adds "phys" variants to the memwrite/memread
	commands in memory.tcl.  Change-Id: Ia6307f9d861789e7f3ccf1f98961d666bf8d85d6 Signed-off-by:
	Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on:
	http://openocd.zylin.com/3387 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-05-25  Andrey Skvortsov <andrej.skvortzov@gmail.com>

	* : flash: nor: mdr: fix verification problem with 1986VE1T or
	1986VE3T 1986VE1T and 1986VE3T have issue with flash acceleration engine
	described in their errata (issue 0007).  After programming flash
	acceleration engine's buffer contains old data, and therefore first
	read data are wrong. Because of this verification after programming
	fails always. Recommended workaround for the issue is to flush flash
	accelerator's buffer. To do so it's necessary to read at least 64
	bytes of flash through accelerator.  Reading bytes through JTAG using default_flash_read doesn't help.
	It seems that reading should be done by uC itself.  Change-Id: I18ef464a68ad5c5b16d3933f31ca61f8e2e7cca3 Signed-off-by:
	Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3509 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-04-24  Tomas Vanek <vanekt@fbl.cz>

	* : arm_adi_v5: add dap apreg command for AP register read/write A developer tool: Direct access to AP registers can be useful for
	handling vendor specific AP like Freescale Kinetis MDM or Atmel
	SMAP.  Change-Id: Ie2c7160fc6b2e398513eb23e1e52cbb52b88d9bd Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/2777 Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Tested-by: jenkins

2016-07-11  Steven Stallion <stallion@squareup.com>

	* : server: support binding to arbitrary interfaces Some installations of OpenOCD are used in restricted environments
	that do not permit binding to public interfaces.  This patch does not affect the default behavior to listen on all
	interfaces, however it does give the option to restrict services by
	way of the bindto command.  Change-Id: Id51bd64b376a8c62dd47b08b4d834872925e6af2 Signed-off-by:
	Steven Stallion <stallion@squareup.com> Reviewed-on:
	http://openocd.zylin.com/3534 Tested-by: jenkins Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz>

2015-11-27  Esben Haabendal <esben@haabendal.dk>

	* : cfi: Add support for strangely endianness broken SoC
	implementations This adds the 'data_swap' parameter to the CFI driver, which enables
	swapping of data bytes when writing/programming words to the flash.
	Note, that this specifically means that bytes are not swapped when
	writing command words to the flash chip.  Unless you are using the
	SAP in an LS102x chip to program an attached 16-bit NOR flash, you
	hopefully do not need this! Change-Id: I1e6f7169da36f373c880d1756d9c21c9957acc50 Signed-off-by:
	Esben Haabendal <esben@haabendal.dk> Reviewed-on:
	http://openocd.zylin.com/3109 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-05-31  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : stm32f7x.cfg: Fix expected JTAG id.  Change-Id: Icd21b9ac5f50094262f30db431d8a775a0d263ca Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/3512 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-05-16  Marc Schink <openocd-dev@marcschink.de>

	* : Remove FSF address from GPL notices Also make GPL notices consistent according to:
	https://www.gnu.org/licenses/gpl-howto.html Change-Id: I84c9df40a774958a7ed91460c5d931cfab9f45ba Signed-off-by:
	Marc Schink <openocd-dev@marcschink.de> Reviewed-on:
	http://openocd.zylin.com/3488 Tested-by: jenkins Reviewed-by:
	Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2015-11-29  Andreas Frber <afaerber@suse.de>

	* : armv4_5: Integrate build of erase check code Add rules to build armv4_5_erase_check.inc, and convert the code to
	target endianness the least intrusive way.  Drop an unused word from the assembler sources to make the ARM
	bytecode fully match that of armv4_5.c and to not break ARMv4
	assumptions.  This completes the build rules for contrib/loaders/erase_check
	directory.  Change-Id: I36be7a944e26142088195fa3fb072d4e577bf328 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3135 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-05-08  Andreas Frber <afaerber@suse.de>

	* : armv4_5: Improve arm_checksum_memory() error handling Clean up the working area in case writing fails.  Change the error
	handling paradigm to avoid duplication.  Change-Id: Ie3f95f992a98a1325428e4032a1c17346d4c9977 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3472 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-04-17  Andreas Frber <afaerber@suse.de>

	* : tcl/target: Add PSoC 5LP config Tested with CY8CKIT-059 and soldered-on J5 connector.  Change-Id: I687786179f2df354321a18d26330c60908461e0b Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3410 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-02-16  Andreas Frber <afaerber@suse.de>

	* : xmc4500: Disable SRST for SDRAM App Kit Just like observed with the General App Kit earlier, it now started
	to fail halting:   SWD IDCODE 0x2ba01477   TARGET: xmc4500.cpu - Not halted   in procedure 'reset'   in procedure 'ocd_bouncer'   SWD IDCODE 0x2ba01477   Halt timed out, wake up GDB.  Rely on the target's default sysresetreq behavior to allow flashing
	to work seemlessly again.  Change-Id: Ib9ce5f2c0ab99dca6d0fc74435fe26a58437fae5 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3416 Tested-by: jenkins Reviewed-by: Jeff
	Ciesielski <jeffciesielski@gmail.com> Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2015-07-12  Andreas Frber <afaerber@suse.de>

	* : lpcspifi: Fix SWD support for LPC43xx When using SWD rather than JTAG transport, the lpcspifi driver
	complains:   Error: Device ID 0x0 is not known as SPIFI capable   Error: auto_probe failed This is because target's JTAG tap->idcode is zero for SWD.  Drop this check completely and hardcode the addresses for now.
	Neither the JTAG TAPID nor the SWD IDCODE are unique enough to
	detect the exact chip model and thereby its memory map.  Change-Id: Ic230e3e989a3e1f1a5b3bae68bdb34e5ef55d392 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3089 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2016-04-17  Marc Schink <openocd-dev@marcschink.de>

	* : board/efm32: Disable SRST The current configuration leads to the following error when trying
	to program the target:   SWD IDCODE 0x2ba01477   timed out while waiting for target halted   TARGET: efm32.cpu - Not halted   in procedure 'program'   in procedure 'reset' called at file "embedded:startup.tcl", line
	  478 in procedure 'ocd_bouncer' Use the default reset handling of the target (SYSRESETREQ) to reset
	the system rather than SRST to fix the problem.  Tested on EFM32GG, EFM32TG and EZR32WG STK.  Change-Id: I788c41baf08b20814cbe0934b563424c4bc144b8 Signed-off-by:
	Marc Schink <openocd-dev@marcschink.de> Reviewed-on:
	http://openocd.zylin.com/3420 Tested-by: jenkins Reviewed-by:
	Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2016-05-20  Ivo Manca <pinkel@gmail.com>

	* : nand: change use_raw to boolean Change type of use_raw to boolean. This parameter was already
	assigned a boolean variable (in COMMAND_PARSE_ENABLE) and used as a
	boolean.  Change-Id: I22f8308246cb25ec9ec2395599e406160410a2a8 Signed-off-by:
	Ivo Manca <pinkel@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3496 Reviewed-by: Andreas Färber
	<afaerber@suse.de> Tested-by: jenkins Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2016-05-19  Samuel Martin <s.martin49@gmail.com>

	* : tcl: add STM32F429I-DISC1 board config Both the STM32F429I-DISC{O,1} boards are equipped with the same MCU,
	but differ by the debugging chip: - the STM32F429I-DISCO uses the ST-LINK/V2 chip; - the STM32F429I-DISC1 uses the ST-LINK/V2-B chip (which matches the
	  USB VID/PID set in stlink-v2-1.cfg).  Change-Id: I07d637f72d26cf5d714472638da974eb6ca02325 Signed-off-by:
	Samuel Martin <s.martin49@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3492 Reviewed-by: Andreas Färber
	<afaerber@suse.de> Tested-by: jenkins Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2016-05-18  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : stm32l1/Cat.3: Devices have only one bank.  Change-Id: I02ce243c228ea20be6d5f01fee705a671747ebad Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/3490 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2016-05-16  Andreas Frber <afaerber@suse.de>

	* : kinetis: Fix typo in variable names It's security, not securtiy.  Change-Id: Idb10d7e0a1ca47d2d93b496d12cd4ec7ad116f22 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3487 Tested-by: jenkins Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz>

2016-05-14  Andreas Frber <afaerber@suse.de>

	* : arm_adi_v5: Add part numbers for Infineon XMC4000 family This was found on multiple XMC4500: 	Valid ROM table present 		Component base address 0xe00ff000 		Peripheral ID 0x00001c11db 		Designer is 0x0c1, Infineon (Siemens) 		Part is 0x1db, Unrecognized 		Component class is 0x1, ROM table 		MEMTYPE system memory present on bus On multiple XMC4700 and an XMC4800 this was found instead: 	Valid ROM table present 		Component base address 0xe00ff000 		Peripheral ID 0x00001c11df 		Designer is 0x0c1, Infineon (Siemens) 		Part is 0x1df, Unrecognized 		Component class is 0x1, ROM table 		MEMTYPE system memory present on bus Name them "XMC4500 ROM" and "XMC4700/4800 ROM" respectively.  Change-Id: If369a6d16524004ba439b878f090a313a9f3a760 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3482 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2016-02-14  Alexander Kurz <akurz@blala.de>

	* : jtag ulink: dont compile function when not required ulink_calculate_frequency() is used exclusively when _DEBUG_JTAG_IO_
	is set, no need to compile this function if it is not used.
	Declaring it static in the same commit.  Change-Id: I243ffdf69a1dc3bee6d16e4bb8d78396b6ea5144 Signed-off-by:
	Alexander Kurz <akurz@blala.de> Reviewed-on:
	http://openocd.zylin.com/3241 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-05-14  Andreas Frber <afaerber@suse.de>

	* : arm_adi_v5: Adjust part number column alignment Consistently increase the space-indentation of the .full values to
	nicely align with the new "Qualcomm QDSS Component v1" .type value.  Change-Id: Icd28d8f3fc7c3afcccb9dcfe138ac57d64927d1a Suggested-by:
	Freddie Chopin <freddie.chopin@gmail.com> Signed-off-by: Andreas
	Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3480 Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com> Tested-by: jenkins

2016-05-14  Andreas Frber <afaerber@suse.de>

	* : doc: Fix mismerges of fm4, kinetis and kinetis_ke flash drivers Commit dfc6658cf98d494e066426945879b9f60bbf9678 ("Kinetis: flash
	driver described in openocd.texi") inserted a kinetis section
	between fm3 and lpc2000. Then commit
	43ff5acd45017fd9828cc56f54b929e600956c3b ("flash: New Spansion FM4
	flash driver") was merged, inserting the fm4 section between kinetis
	and lpc2000, instead of after fm3. Finally kinetis_ke was added
	between kinetis and fm4 in commit
	5396ec5dcc64354c8101f8d3f16d498ca3b10326 ("flash: Added support for
	Freescale Kinetis KE family.").  Restore the alphabetical order by moving the fm4 section to before
	kinetis.  Change-Id: I77e47c3cd5b2cd8570b62ff2f7be8526aaf57ad0 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3484 Tested-by: jenkins Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz> Reviewed-by: Marc Schink
	<openocd-dev@marcschink.de>

2016-05-05  Jiri Kastner <cz172638@gmail.com>

	* : arm_adi_v5: added partnumber for APQ8016 On APQ8016 was found a CoreSight component designed by Qualcomm,
	according to db410c HRM [1] it has a partnumber following this
	schema: [11:8] is 0x4 meaning Qualcomm designed Coresight component in QDSS.
	Reads as 0x4.  [7:6] is Subsystem/core family ID (e.g. denote QDSS
	family or generation).  [5:4] is Subsystem/core configuration
	options (e.g. denote cache options, etc.).  [3:2] is Subsystem/core
	fuse options.  [1:0] is Subsystem/core future use field Reads as
	0x440.  [1] -

	https://developer.qualcomm.com/download/sd410/hardware-register-description-qualcomm-snapdragon-410.pdfChange-Id: I9b4b41fd17c59d2f5ae35b53278d06d6087665f8 Signed-off-by:
	Jiri Kastner <cz172638@gmail.com> Signed-off-by: Andreas Färber
	<afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3408
	Tested-by: jenkins Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2016-02-08  Rick Foos <rfoos@solengtech.com>

	* : flash/nor: Add Ambiq Micro Apollo flash driver.  Initial release of Ambiq Micro Apollo flash driver supporting our
	sub-threshold (low power) Cortex M4F part, and Evaluation Kit.  We have been shipping openocd to our customers for about one year.  The EVK boards are SWD only using ftdi. We also use two of the other
	COM instances to display debug information.  It takes about 15 seconds to flash 512K, and mass erase is about 5
	seconds.  Tested by internal verification group, FAE's, and customer sites.  Merged commit 'refs/changes/17/3417/1' as suggested. Makefile.am and
	drivers.c follow the new format to avoid conflicts.  Removed unused fault_capture command.  Added documentation for flash driver.  Change-Id: Iae92d869369c6827244f0071f9cb522d8d91fed8 Signed-off-by:
	Rick Foos <rfoos@solengtech.com> Reviewed-on:
	http://openocd.zylin.com/3230 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2016-05-08  Andreas Frber <afaerber@suse.de>

	* : xmc4xxx: Improve xmc4xxx_blank_check_memory() error handling Clean up working area in case writing fails. Probably inherited from
	armv7m_blank_check_memory(). Fix adapted from
	armv7m_checksum_memory().  Change-Id: I784bef481d1eba833ab6a9c34249fe9d43a16081 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3470 Tested-by: jenkins Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz>

2016-05-11  Aleksander Morgado <aleksander@aleksander.es>

	* : arm7: add missing braces around an if() Spotted by gcc:     arm7_9_common.c: In function ‘arm7_9_unset_breakpoint’:     arm7_9_common.c:353:4: error: this ‘if’ clause does not
	        guard... [-Werror=misleading-indentation] if (current_instr ==
	        arm7_9->thumb_bkpt) ^~     arm7_9_common.c:356:5: note: ...this statement, but the latter
	         is misleadingly indented as if it is guarded by the ‘if’ if
	         (retval != ERROR_OK) ^~ The logic won't change once the braces have been added, as the new
	'retval' check only makes sense within the if().  Change-Id: I6a303e118f2150e5eb25c9268ad06de5d8a533b2 Signed-off-by:
	Aleksander Morgado <aleksander@aleksander.es> Reviewed-on:
	http://openocd.zylin.com/3477 Tested-by: jenkins Reviewed-by:
	Andreas Färber <afaerber@suse.de> Reviewed-by: Matthias Welwarsky
	<matthias@welwarsky.de> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2016-02-13  Alexander Kurz <akurz@blala.de>

	* : Helper ioutil: cleanup: removing dead code The ioutil helper functions copyfile and copydir were last and only
	used in ecosboard.c which has been removed with commit 39650e22.
	Removing the dead code.  Change-Id: I36c7c4c5009d755b4513a14a9f9e214d1ee500e8 Signed-off-by:
	Alexander Kurz <akurz@blala.de> Reviewed-on:
	http://openocd.zylin.com/3240 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2016-02-22  Robert Jordens <jordens@gmail.com>

	* : flash/nor/spi: fix macronix 25l1005 chip erase Change-Id: Ibc445bbe9360d0f1f41e71af8b990b96e0ae5d1f Signed-off-by:
	Robert Jordens <jordens@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3349 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2016-03-02  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : stlink: Decode more errors.  For STLINK_SWD_AP_FAULT git://git.ac6.fr/openocd commit
	657e3e885b9ee10 returns ERROR_OK with the comment: Change in error
	status when reading outside RAM.  This fix allows CDT plugin to
	visualize memory.  Change-Id: Id8e220961b748ef9467fd84de62b1dc84ace63f8 Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/3373 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2016-03-25  Lieven Hollevoet <lieven@quicksand.be>

	* : Support for debug interface lock of EFM32 controllers The capability to lock the debug interface on EFM32 controllers was
	lacking in OpenOCD.  After receiving some pointers by zapb_ and
	PaulFertser on IRC (thanks guys!) I have added this capability.  This works by writing the required bits in the debug lock word to
	'0'.  Note: there is currently no way to re-enable the debug interface
	from OpenOCD as doing this requires specific pin wiggling that is
	currently not implemented yet.  However: having the capability to lock the debug interface is useful
	when building a volume programming jig.  You can flash the program
	code, verify and then lock the debug interface so that the device
	cannot be read when it is deployed in the field.  Change-Id: If2d562dfdb4b95519785a4395f755d9ae3d0cf12 Signed-off-by:
	Lieven Hollevoet <hollie@lika.be> Reviewed-on:
	http://openocd.zylin.com/3389 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2016-04-24  Andreas Frber <afaerber@suse.de>

	* : xmc4xxx: Fix error propagation for erase_check callback If an error occurs during xmc4xxx_blank_check_memory() aka
	.erase_check, it would break out of the loop over flash sectors and
	return ERROR_OK.  Instead return the error code so that tcl.c can notify the user.  Change-Id: Ie2c1b7933eef2b240b28f8a292634fbbf5b31706 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3425 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2016-04-06  Matthias Welwarsky <matthias.welwarsky@sysgo.com>

	* : ftdi: make ftdi_location command depend on libusb1 version The function libusb_get_port_numbers(), required for the command
	ftdi_location, is only available in recent version of libusb1.
	Compilation will break if the function is not available. This patch
	enables the command only if libusb1 contains the necessary function.  Change-Id: I091e72dafa4ed22eea51692751d43246a8152987 Signed-off-by:
	Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on:
	http://openocd.zylin.com/3396 Tested-by: jenkins Reviewed-by:
	Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2016-04-21  Peter D. Gray <peter@conalgo.com>

	* : at91samd: Add additional "B Variant" parts from SAMD21 family The parts are listed in Rev I of the Datasheet Change-Id: Icdd9108a0f1f19f666fce79de7f25df9f46de866 Signed-off-by:
	Peter D. Gray <peter@conalgo.com> Reviewed-on:
	http://openocd.zylin.com/3424 Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com> Tested-by: jenkins

2014-08-24  Salvador Arroyo <salvador@telecable.es>

	* : Fix for BMIPS BMIPS always needs 2 additional instructions to reach the core.
	Seems there is a 2 instructions fifo between the tap and the core,
	or it behaves in this way.  No idea of the purpose of this fifo, I
	can only guess.  Of course function mips32_pracc_clean_text_jump()
	must add this additional instructions (NOPs).  Only tested on
	bcm3348..  Change-Id: I3183d3ce865d469d7262ba4b15446e5743a5f1df Signed-off-by:
	Salvador Arroyo <salvador@telecable.es> Reviewed-on:
	http://openocd.zylin.com/2270 Tested-by: jenkins Reviewed-by: Kent
	Brinkley <jkbrinkley.imgtec@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2016-04-25  Tomas Vanek <vanekt@fbl.cz>

	* : at91samd: Atmel SAML22 (segment LCD) family added Part IDs taken from Atmel-42402C-SAM L22_Datasheet_Complete-01/2016
	(revision C) Change-Id: I1eb76a92097a8327da10faa0551e7fc962a549f8 Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/3426 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2015-12-19  Tomas Vanek <vanekt@fbl.cz>

	* : flash Kinetis: new KVx family added Cortex-M0+ and M4 motor control MCUs KV10, KV11, KV30, KV31, KV42,
	KV44 and KV46 added to SDID identification.  Watchdog disable code
	changed to work on Cortex-M0+ (KV1x) Protection size set to 1K for
	16K flash devices (KV10Z16) - cherry picked from Andrey Smirnov's change #2051 Change-Id: Ia6f4868eaf7e2cb6ad6a736210c703a67e0027be Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/3235 Tested-by: jenkins Reviewed-by: Kyle
	Manna <kyle.manna@fuel7.com> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2016-04-17  Andreas Frber <afaerber@suse.de>

	* : flash/nor: Reorder drivers alphabetically To avoid conflicts between flash drivers being added, consistently
	use an alphabetical sort order for the three places new drivers get
	added: * Makefile.am NOR_DRIVERS (note: automake disallows a trailing
	backslash) * drivers.c struct flash_driver forward declarations * drivers.c flash_drivers array Change-Id: Idcd6a8e12821ef10958a6b3ad7bac0dc63cadd08 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3417 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2016-03-02  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : stm32f2x.c: Add more F4 devices.  Taken from git://git.ac6.fr/openocd commit e8ed67c42227b7072
	STM32F446 (0x434) now is's own case.  Change-Id: I5061db7102b4c923c9f39d3d2f0cc69d29fca0a4 Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/3375 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2015-11-30  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* :  stm32l4x.c: Correct waiting for data.  Old code waited only for 7 bytes and didn't handle buffer
	wrap-around, but was functional despite.  Change-Id: Iceaf7be1e51368b2ec0a8722cc9ac16d12f9aa63 Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/3140 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2016-04-13  Marc Schink <openocd-dev@marcschink.de>

	* : server/telnet: Check malloc() return values Change-Id: I598bd2dd5a65c0d1a8745bde41763057c4427a31 Signed-off-by:
	Marc Schink <openocd-dev@marcschink.de> Reviewed-on:
	http://openocd.zylin.com/3412 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2016-04-06  Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>

	* : RTOS support: Add FPU support for FreeRTOS Add new structure for for working with FPU thread in thread view.
	This modification support both stacking.  When FPU is activated, LR
	must be validated to check if the FPU register are push on the
	stack. This is mandatory to find the correct stack pointer position.  the modified code was inspired and adapted from
	https://github.com/TauLabs/TauLabs/commit/88d2003bb83a6b72c796274c889e307f96645966Change-Id: I6641926aa14e7216cacb399cbc8bb0db324cc9fc Signed-off-by:
	Jonathan Dumaresq <jdumaresq@cimeq.qc.ca> Reviewed-on:
	http://openocd.zylin.com/3397 Tested-by: jenkins Reviewed-by: Sergey
	A. Borshch <sb-sf@users.sourceforge.net> Reviewed-by: Harry Zhurov
	<harry.zhurov@gmail.com> Reviewed-by: Anton Gusev Reviewed-by:
	Михаил Цивинский <mtsivinsky@gmail.com> Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2015-11-30  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : stm32l4x.c: Free r6/7 for 64-bit operations.  Use r5 instead of r7.  Change-Id: I350d00eeabe9446d64dba8f1dbffb5d4beab7dd6 Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/3138 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2016-03-10  Tomas Vanek <vanekt@fbl.cz>

	* : flash Kinetis: remove TARGET_HALTED halted check from probe There is no reason why not probe running target.  Initial gdb
	connect to running target is now possible without halt in gdb-attach
	event.  Change-Id: Iacc4a231587d378168b18db871582f1086504831 Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/3382 Tested-by: jenkins Reviewed-by: Uwe
	Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-02-02  Matthias Welwarsky <matthias.welwarsky@sysgo.com>

	* : ftdi: allow selecting device by usb bus location This patch adds a 'ftdi_location' command to select an adapter by
	usb bus number and port path.  This is helpful if you have a rack full of adapters in a testing or
	manufacturing setup where the only constant is the physical usb bus
	location of the adapter you want to address. Vid:Pid are not unique,
	serial number _may_ be unique (and maybe not with embedded adapters)
	but will change when a new target is plugged.  Specifying a location allows to understand instantly which board
	failed bringup or testing.  Change-Id: I403c7c6c8e34fe42041b3f967db80f3160a4f1a3 Signed-off-by:
	Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on:
	http://openocd.zylin.com/3351 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-12-13  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : jim-nvp: Make Jim_GetOpt_String const-correct Change-Id: Iae9824f6ff47a1944e674e59bfaa970904645082 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3178 Tested-by: jenkins

2016-01-12  Evan Hunter <ehunter@broadcom.com>

	* : Cortex-A/R: Add missing timeout for loop polling DSCR & fix
	timeout types Change-Id: I345658cfdc8a34a98418727423ac6bd562e980f3 Signed-off-by:
	Evan Hunter <ehunter@broadcom.com> Reviewed-on:
	http://openocd.zylin.com/3201 Tested-by: jenkins Reviewed-by:
	Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2015-12-06  Andreas Frber <afaerber@suse.de>

	* : fm4: Add support for MB9BFx64/x65 These appear to be just additional flash size configurations.
	Entirely based on manual, untested.  Change-Id: I4460dc1a588335df8fc0a385d24513a4e35b6951 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3157 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2016-02-06  Paul Fertser <fercerpav@gmail.com>

	* : flash: nor: mdr: implement read/verify for Info memory This adds necessary code to obtain data from the Info region which
	is not memory-mapped so can't be read the usual way.  With this "flash read_bank" and "flash verify_bank" commands should
	start to work as expected for the Info memory block.  Change-Id: I57e4b80fff577500cfa85954b625fe9c9ff92aa5 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3227 Tested-by: jenkins Reviewed-by: Eldar
	Khayrullin <eldar.khayrullin@mail.ru> Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2015-11-29  Andreas Frber <afaerber@suse.de>

	* : xmc4xxx: Integrate build of erase check code Instead of pointing to the assembler sources in a comment and
	inline-commenting the THUMB bytecode, place the hex array alongside
	the assembler sources and include it via preprocessor.  Originally inspired by a typo in the file path during driver
	development, but it also facilitates making changes to the assembler
	sources.  A Makefile is provided to help automate updating the bytecode. It is
	not integrated with the automake system to avoid forcing an ARM
	cross-compiler onto every user, i.e. after modifying the sources
	they need to be rebuilt in that directory before building the usual
	way. ARM_CROSS_COMPILE= can be passed on the make command line to
	deal with native ARM toolchains or with varying prefixes of
	cross-toolchains.  Change-Id: I00ceb980a68c8554a180dd13719ac77b677a8bcd Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3133 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-02-17  Colin Helliwell <colin.helliwell@ln-systems.com>

	* : at91sam4 Flash: Added identification of atsam4n's The Flash driver for at91sam4 cpu's has been enhanced to recognise
	and support the SAM4N family.  Change-Id: I50c471a6053b52edffd8efdd8abfe516cc5c55ee Signed-off-by:
	Colin Helliwell <colin.helliwell@ln-systems.com> Reviewed-on:
	http://openocd.zylin.com/3242 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2016-02-25  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : stm32lx.c: Add STM32L0 categories 1, 2 and 5.  Change-Id: I493072a856a66e4cd60de490a0937287db4b5c4d Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/3360 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-02-26  Alexander Kurz <akurz@blala.de>

	* : flash/nor/faux.c: fixing check for failed malloc Error found by static code analysis using the semantic pattern
	null_ref2/mini_null_ref2.cocci, see coccinellery.org Change-Id: Ic817c29f0ccf2b41fc8f7d9a480ad30d6e5b7ab8 Signed-off-by:
	Alexander Kurz <akurz@blala.de> Reviewed-on:
	http://openocd.zylin.com/3364 Tested-by: jenkins Reviewed-by: Uwe
	Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-02-28  Alexander Kurz <akurz@blala.de>

	* : flash/nor/stellaris: fix: flash info RCC and RCC2 mixed up The flash info command on stellaris platformes "TI/LMI Stellaris
	information ... rcc is ..., rcc2 is ..." presented the actual RCC2
	register as rcc and an uninitialized variable as rcc2 due to a copy
	and paste error.  Found using the semantic pattern da/da.cocci, see
	coccinellery.org Change-Id: I6f920fc3e07fdc085ea8e2248fbc9453eb8393dc Signed-off-by:
	Alexander Kurz <akurz@blala.de> Reviewed-on:
	http://openocd.zylin.com/3368 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-02-28  Alexander Kurz <akurz@blala.de>

	* : Cleanup: removal of obsolete semicolons Obsolete C source code semicolons were removed using the semantic
	patch semicolon/semicolon.cocci, see coccinellery.org Change-Id: I153b4995a9e028ebaf5f58c947821dc78345a777 Signed-off-by:
	Alexander Kurz <akurz@blala.de> Reviewed-on:
	http://openocd.zylin.com/3367 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-02-18  Peter A. Bigot <pab@pabigot.com>

	* : nrf51: move hwid 0057 and add 0058 Chip markings:     N51822 / QFAAG2 / 1435CZ for HWID 0057     N51822 / QFAAG3 / 1436AJ for HWID 0058 Change-Id: I242b94d6a2362aae0de970c7ac77811c76dacdc0 Signed-off-by:
	Peter A. Bigot <pab@pabigot.com> Reviewed-on:
	http://openocd.zylin.com/3187 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2015-12-29  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : arm_adi_v5: Rewrite dap_rom_display Simplify by printing one component per call, instead of one complete
	ROM Table per call. Print common information the same way for all
	components, including ROM tables, because ROM tables (at least the
	top level) contain useful information in their identification
	registers, such as the manufacturer of the SoC.  Print component designer name using the JEP106 helper when
	available.  Change-Id: Ic51bccd98acfae6886243500153fbdd567be2fae Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3182 Tested-by: jenkins Reviewed-by: Jiri
	Kastner <cz172638@gmail.com> Reviewed-by: James Mastros
	<james@mastros.biz>

2016-02-10  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : adi_v5_swd: Avoid special handling the SELECT cache during
	connect The cache is forced to zero to match the value expected by the DPIDR
	read so the connect sequence is not destroyed by a SELECT update.  However, DPIDR and in fact all registers except address 4 are
	independent of the current DPBANKSEL value. Change
	swd_queue_dp_bankselect() to use this fact and avoid touching SELECT
	for those registers.  Change-Id: I0cd11925fb6adef481bbf45cc24ea2c6dab4b6fb Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3231 Tested-by: jenkins Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz>

2015-10-13  Tomas Vanek <vanekt@fbl.cz>

	* : Kinetis: flash driver described in openocd.texi Change-Id: Id3410fc94f73191e3d7810115676046e5c760a0b Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/3014 Tested-by: jenkins

2015-10-02  Tomas Vanek <vanekt@fbl.cz>

	* : Kinetis: invalidate flash cache after erase/write Cached old flash contents broke verify readback on Kx devices.  Change-Id: I0effaf358f451b473f0d9c762a133ffd21bc64b4 Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/2993 Tested-by: jenkins

2015-10-02  Tomas Vanek <vanekt@fbl.cz>

	* : Kinetis: nvm_partition command Command for partitioning FlexNVM to data flash and EEPROM blocks Change-Id: Ia0ea65d72b0e5f23da330520284b0bd26435e444 Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/2991 Tested-by: jenkins

2015-10-01  Tomas Vanek <vanekt@fbl.cz>

	* : Kinetis: kinetis_ftfx_command() based on target instead of flash
	bank kinetis_ftfx_command() did not use other struct flash_bank* members
	than base->target. Switching first parameter to struct target*
	enables use of kinetis_ftfx_command() without unnecessary bank
	getting and probing.  Removed kinetis_securing_test: kind of dead code, same function as
	command flash erase_address pad 0x400 0x10 Removed "NAND" word from help as flash is obviously NOR Change-Id: I3f5fc295ef2bf42f3e913549949f2a36377f6367 Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/2988 Tested-by: jenkins

2016-01-21  Freddie Chopin <freddie.chopin@gmail.com>

	* : Add board config for ST NUCLEO L476RG board The file was contributed by Sébastien Lorquet.  Change-Id: I118f5b16181488b9e3327891e6130b908419f1c4 Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3214 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2016-01-29  anpilog <anpilog@gmail.com>

	* : cmsis-dap: Fix CMSIS-DAP serial number processing.  Check CMSIS-DAP adapter has serialnumber before pass it to wcscmp.
	Keep looking for onother adapter if choosed one doesn't have correct
	serialnumber.  Change-Id: I7d386a03cb49b9baf22073ae1c6b14269ed3b618 Signed-off-by:
	Andrii Anpilogov <anpilog@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3226 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-11-05  Jacob Rosenthal <jakerosenthal@gmail.com>

	* : flash: nor: nrf51: add hwid 0x0057 Change-Id: I43b9dc1ce254a8ee8c84ad8e25bb809eb8629e13 Signed-off-by:
	Jacob Rosenthal <jakerosenthal@gmail.com> Signed-off-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3102 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-11-20  Kent Brinkley <jkbrinkley.imgtec@gmail.com>

	* : Change isa string Laying the ground work for adding microAptiv core Change-Id: I161a8a8cb250240ebc8518c91e746d6f921c41c7 Signed-off-by:
	Kent Brinkley <jkbrinkley.imgtec@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2400 Tested-by: jenkins Reviewed-by: Mindy
	Beseler <mbeseler@yahoo.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2016-01-15  Robert Jordens <jordens@gmail.com>

	* : flash/nor/spi: reorder to group micron devices Change-Id: Ic5b13e8b994d0741a0a12cd7ed427191b42958e2 Signed-off-by:
	Robert Jordens <jordens@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3207 Tested-by: jenkins Reviewed-by:
	Antonio Borneo <borneo.antonio@gmail.com>

2016-02-13  Alexander Kurz <akurz@blala.de>

	* : Helper time_support: const function arguments duration_elapsed and duration_kbps will not modify the struct
	duration passed as function argument, hence it should be declared
	const.  Change-Id: I459c396952c78e907257e2c2f2c630abde92aaa8 Signed-off-by:
	Alexander Kurz <akurz@blala.de> Reviewed-on:
	http://openocd.zylin.com/3232 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2015-11-16  Tim 'mithro' Ansell <mithro@mithis.com>

	* : tcl: Support for the miniSpartan6+ board.   * https://www.scarabhardware.com/minispartan6/  *

	https://github.com/scarabhardware/miniSpartan6-plus/raw/master/miniSpartan6%2B_Rev_B.pdfThe miniSpartan6+ board is wired identically to the Pipistrello
	device but sadly doesn't have a custom device description.  Change-Id: I07fd57b1ec87d72edf68860684928a3781e2f08a Signed-off-by:
	Tim 'mithro' Ansell <mithro@mithis.com> Reviewed-on:
	http://openocd.zylin.com/3117 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-01-15  Paul Fertser <fercerpav@gmail.com>

	* : flash: nor: {pic32mx,cfi}: fix register names Commit fd43be07265b5f3cf3146f2bb80c1c2fc0a44fcf introduced a
	regression: since the register names were changed from those
	traditional for MIPS to common GDB scheme the code that makes use of
	them needs to be changed accordingly.  This commit restores pic32mx flash driver functionality.  Change-Id: Id18c739390fae36737a02dc30c363d0444f53b96 Reported-by:
	Louis Rannou <louson@users.sf.net> Signed-off-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3206
	Tested-by: jenkins Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2015-12-28  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : helper: Add converter from JEP106 ID to manufacturer name Use it to print the manufacturer of detected TAPs Change-Id: Ic4384c61c7f6f7ae2a9b860a805a5997542f72cc Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3177 Tested-by: jenkins Reviewed-by: Jiri
	Kastner <cz172638@gmail.com> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2016-01-20  Jiri Kastner <cz172638@gmail.com>

	* : arm_adi_v5: dap_partnums - correction of partnumbers, new added according to...  ARM DDI 0433B is:   0x9a5 Cortex-A5 PMU ARM DDI 0435C is:   0x955 Cortex-A5 ETM ARM DDI 0401C is:   0x950 Cortex-A9 PTM ARM DDI 0469B is:   0x931 Cortex-R5 ETM ARM DDI 0460D is:   0xc15 Cortex-R5 Debug ARM DDI 0458C is:   0x9b7 Cortex-R7 PMU   0xc17 Cortex-R7 Debug ARM DDI 0535C is:   0x95b Cortex-A17 PTM   0x9ae Cortex-A17 PMU   0xc0e Cortex-A17 Debug ARM DDI 0500F is:   0x9a8 Cortex-A53 CTI   0x95d Cortex-A53 ETM   0x9d3 Cortex-A53 PMU   0xd03 Cortex-A53 Debug ARM DDI 0488G is:   0x906 Cortex-A57/A72 CTI   0x95e Cortex-A57 ETM   0x9d7 Cortex-A57 PMU   0xd07 Cortex-A57 Debug ARM 100095_0002_03_en is:   0x95a Cortex-A72 ETM   0x9d8 Cortex-A72 PMU   0xd08 Cortex-A72 Debug Change-Id: Ieffefb30f2e75c45fe1a2f9c8204e3a9b1af3d7a Signed-off-by:
	Jiri Kastner <cz172638@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3198 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-12-11  Matthias Welwarsky <matthias@welwarsky.de>

	* : adi_v5_jtag: implement DAP WAIT support ADIv5 specifies that DP and AP accesses may generate a WAIT response
	when the hardware is not able to complete a request for various
	reasons in time before the next request is sent. Currently, the
	software treats a WAIT response as a fatal error and aborts
	operation on the DAP.  This patch implements WAIT handling by keeping a journal of all
	outstanding and completed accesses, including their response status.
	At certain times (when dap_run() is called), the journal is
	inspected for WAIT responses and all discarded accesses are replayed
	to complete them. Special care is taken to not re-execute already
	successfully completed operations.  Change-Id: I2790070388cf1ab2e8c9a042d74eb3ef776aa583 Signed-off-by:
	Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on:
	http://openocd.zylin.com/3166 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2016-01-12  Evan Hunter <ehunter@broadcom.com>

	* : Cortex-A: Fix unicode quote in comment Change-Id: I4747c113ab6c02199f078d9b4a4ec372d011fb2d Signed-off-by:
	Evan Hunter <ehunter@broadcom.com> Reviewed-on:
	http://openocd.zylin.com/3200 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2015-12-31  Peter A. Bigot <pab@pabigot.com>

	* : arm_adi_v5: deconflict local variables from global symbols BeagleBone debian 7 builds produce:    adi_v5_jtag.c: In function 'jtag_ap_q_bankselect':    adi_v5_jtag.c:336:11: error: declaration of 'select' shadows a
	   global declaration [-Werror=shadow] Fix this by changing the local variable to 'sel'.  Change-Id: I8e29662ac12bc77d38d5064046d59b7364853cd9 Signed-off-by:
	Peter A. Bigot <pab@pabigot.com> Reviewed-on:
	http://openocd.zylin.com/3184 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2015-12-17  Spencer Oliver <spen@spen-soft.co.uk>

	* : libjaylink: use http mirror for submodule The other submodules default to http for users behind firewalls.  Change-Id: I58fce00478ec6c94f75992f4e8f0c24f556abe61 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/3172 Tested-by: jenkins

2015-11-24  Matthias Welwarsky <matthias@welwarsky.de>

	* : cortex_a: add 'dacrfixup' to cortex-a command group work around issues with software breakpoints when the text segment
	is mapped read-only by the OS. Set DACR to "all-manager" to bypass
	TLB permission checks on memory access.  Change-Id: I79fd9b32b04a4d538d489896470ee30b26b72b30 Signed-off-by:
	Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on:
	http://openocd.zylin.com/3107 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-10-13  Matthias Welwarsky <matthias@welwarsky.de>

	* : AM335x: allow simultaneous debugging of A8 and M3 cores This patch fixes the tap order so that it matches the actual jtag
	chain when all taps are enabled. It also introduces a variable
	DEFAULT_TAPS that can be set outside of this script, e.g. on the
	command line, to specify which taps are to be enabled on init.
	Lastly, a new debug target "am335x.m3" is added so that the
	Wakeup-M3 can be selected for debugging.  Change-Id: Iccf177fda8d5e3737b1b2bb8fd1eaa7d3262ed9f Signed-off-by:
	Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on:
	http://openocd.zylin.com/3013 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-12-15  Andreas Frber <afaerber@suse.de>

	* : tcl/board: Add Renesas DK-S7G2 config Tested with "J-Link OB RX621-ARM-SWD V1 compiled Nov  4 2014
	10:47:22".  Change-Id: Ib64c0be407f99df57f058a4498556fd5ab7e9112 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3170 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-11-29  Andreas Frber <afaerber@suse.de>

	* : tcl/board: Add Infineon XMC4700 Relax Kit Series config Tested with Relax Kit for 5V Shields:   J-Link Lite-XMC4200 Rev.1 compiled Oct 14 2015 10:14:50 and with
	  Relax Lite Kit: J-Link Lite-XMC4200 Rev.1 compiled Oct 14 2015
	10:14:50 Derived from xmc4800-relax.cfg.  Change-Id: I4e10fb6ed1f85168634d3b5259d3041ffc6b74d8 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3130 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-12-17  Matthias Welwarsky <matthias@welwarsky.de>

	* : arm_debug: optimize DP and AP reads over JTAG On JTAG, all reads are pipelined. If you read a register, the result
	is not delivered inside the request that issued the read, it is
	delivered in the following request. The current code therefore
	issues a scan of the RDBUFF register after each read. This adds a
	superfluous transaction after each read.  This patch follows a strategy similar to what SWD already
	implements.  It also leverages that all JTAG reads are pipelined,
	i.e. the result will be clocked out in the next JTAG data phase, no
	matter if it's READ or WRITE. Therefore it's never necessary to
	explicitly read RDBUFF other than for the very last READ before a
	dap_run().  Change-Id: Ie40b1fef3203f0cdcb503f40dcbd2a68b0f9776c Signed-off-by:
	Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on:
	http://openocd.zylin.com/3167 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2015-12-08  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : arm_adi_v5: Make the DAP API stateless Remove entirely the concept of a "selected" AP that has to be
	maintained between calls. All the information the DAP ops need are
	now provided to each call through the AP/DAP pointer.  Consolidate the cache of the SELECT fields into one single field
	caching the entire register.  Change-Id: I2e1c93ac5ee8ac38a7d680ca2c660c30093a6b87 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3165 Tested-by: jenkins Reviewed-by:
	Matthias Welwarsky <matthias@welwarsky.de>

2015-12-06  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : arm_adi_v5: Fix dap apsel confusing behaviour.  Make dap apsel without arguments show current state instead of
	changing to AP 0.  Change-Id: I75ea10e3e1b8a067f2dc417ec6691dc7ceec1af6 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3163 Tested-by: jenkins Reviewed-by:
	Matthias Welwarsky <matthias@welwarsky.de>

2015-12-06  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : cortex: Set default memaccess_tck only during examine It's currently set during target creation but the AP that will be
	used for the target is not even known.  Change-Id: I4502e7eb1fa8d90f746445b8cf8a4c21cb7d519e Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3155 Tested-by: jenkins Reviewed-by:
	Matthias Welwarsky <matthias@welwarsky.de>

2015-12-28  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : arm_adi_v5: Remove all mem_ap_sel_* functions All mem_ap_* functions now make sure the SELECT register is updated
	with the AP number that it's operating on. This shouldn't have to be
	handled explicitly.  Change-Id: Ib193d8930fabb6a25715064355f98258c9580b5d Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3153 Tested-by: jenkins Reviewed-by:
	Matthias Welwarsky <matthias@welwarsky.de>

2015-12-06  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : arm_adi_v5: Split ahbap_debugport_init This function does two separate things, powering up the DP and
	setting up a MEM-AP. But the DP needs to be powered before even
	searching for a MEM-AP to initialize and targets may have multiple
	MEM-APs that need initializing.  Split the function into dap_dp_init() and mem_ap_init() and change
	all call sites to use the appropriate one.  Change-Id: I92f55e09754a93f3f01dd8e5aa1ffdf60c856126 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3151 Tested-by: jenkins Reviewed-by:
	Matthias Welwarsky <matthias@welwarsky.de>

2015-12-06  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : arm_adi_v5: Change mem_ap calls to take pointer to AP and not
	DAP Change-Id: I8d3e42056aa5828cb917ca578a54b7d53846a150 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3149 Tested-by: jenkins Reviewed-by:
	Matthias Welwarsky <matthias@welwarsky.de>

2015-12-06  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : arm_adi_v5: Convert the AP references from numbers to pointers Change the debug_ap and memory_ap fields of the cortex_a target and
	the debug_ap field of the cortex_m target to be pointers to the
	struct adiv5_ap instead of AP numbers in some known DAP.  This reduces the dependency on the DAP struct in the targets and
	enables MEM-AP accesses to take the relevant AP as parameter.  Change-Id: I39d7b134d78000564b7eec5bff464adf0ef89147 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3147 Tested-by: jenkins Reviewed-by:
	Matthias Welwarsky <matthias@welwarsky.de>

2015-12-06  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : cortex_a: Call ahbap_debugport_init on the discovered AP and not
	0 Change-Id: I76bb9bd800697776a375ab803402780c3c7bea35 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3145 Tested-by: jenkins Reviewed-by:
	Matthias Welwarsky <matthias@welwarsky.de>

2015-11-14  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : arm_adi_v5: Remove unused is_swd flag Not clear what it was supposed to be used for. It probably
	shouldn't.  Change-Id: Ife1d833e59ba80f93876447d752a0ca7e7b57b0f Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3143 Tested-by: jenkins Reviewed-by:
	Matthias Welwarsky <matthias@welwarsky.de>

2015-11-13  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : swd: Remove DAP from parameter list Making the SWD driver aware of the DAP that controls it is a
	layering violation.  The only usage for the DAP pointer is to store the number of idle
	cycles the AP may need to avoid WAITs. Replace the DAP pointer with
	a cycle count hint instead to avoid future misuse.  Change-Id: I3e64e11a43ba2396bd646a4cf8f9bc331805d802 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3141 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-12-06  Patrick Stewart <patstew@gmail.com>

	* : cortex_m: Select an AP when accessing the DAP Prepare to support multiple cortex-m cores on one DAP. Uses
	mem_ap_sel_* functions and removes mem_ap_* functions. Adds a new
	debug_ap parameter to the cortex_m (currently set to zero as in
	existing code).  Change-Id: I6926029d1e7bf44a42d453d1aff349bda824ba72 Signed-off-by:
	Patrick Stewart <patstew@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2983 Tested-by: jenkins Reviewed-by:
	Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2015-08-06  Alamy Liu <alamy.liu@gmail.com>

	* : adi_v5: Rename AP_REG_* to MEM_AP_REG_* and add LA support This is a TODO in the src/target/arm_adi_v5.h for MEM-AP registers.  Some new registers are introduced in ADIv5.2 specification.    MEM_AP_REG_MGT    (0x20) // Memory Barrier Transfer register   MEM_AP_REG_TAR64  (0x08) // Bits[63:32] of Transfer Address   MEM_AP_REG_BASE64 (0xF0) // Bits[63:32] of Debug Base Address Refer to   7.5 MEM-AP register summary in   IHI0031C: ARM Debug Interface Architecture Specification ADIv5.0
	  to ADIv5.2 Change-Id: I3bc4296a04c35f5c64f851e5865d3099922613fa Signed-off-by:
	Alamy Liu <alamy.liu@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2904 Tested-by: jenkins Reviewed-by:
	Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2015-12-28  Paul Fertser <fercerpav@gmail.com>

	* : jtag: drivers: bcm2835gpio: fix a typo in informational message Change-Id: I70176f9c623e85ba03d8e08992cade232c1bd7fd Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3176 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2015-11-29  Andreas Frber <afaerber@suse.de>

	* : xmc4xxx: Add XMC4800 support Tested with EES-AA chip revision on Relax EtherCAT Kit.  Change-Id: I457f24d242e0674d1f446c03a329efadff754d6a Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3132 Tested-by: jenkins Reviewed-by: Jeff
	Ciesielski <jeffciesielski@gmail.com> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2015-11-25  Matthias Welwarsky <matthias@welwarsky.de>

	* : cortex_a: fix fast-mode memory reads cortex_a_read_apb_ab_memory_fast() uses the wrong order of ITR and
	DSCR writes when setting up the transfer. ARM DDI0406C says in C8.2
	regarding "Fast mode" operation to first switch to fast mode and
	then latch the instruction in ITR. Current implementation first
	wrote ITR, causing the instruction to be executed immediately, then
	switched to fast mode without an instruction latched. Repeated
	reading of DTRTX didn't execute LDC and thus replicated its current
	content into the whole buffer.  This patch uses the following, revised algorithm: 1) switch to non-blocking mode and issue the LDC for the first word 2) if more than one word is to be read:  - switch to fast mode  - latch the LDC instruction into ITR (it is _not_ executed)  - issue (count-1) reads of DTRTX register, each read returns the
	   current content of DTRTX and re-issues the latched instruction  -> now the second-to-last word is in the buffer and the LDC for the
	    last word has been issued.  3) wait for the last instruction to complete 4) switch back to non-blocking mode 5) Read DTRTX for the last (or: only) word and put it into the
	buffer Change-Id: I44f5c585962ffa5af257c3d5a2a802c122b6b1e4 Signed-off-by:
	Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on:
	http://openocd.zylin.com/3122 Tested-by: jenkins Reviewed-by:
	Christopher Head <chead@zaber.com> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2015-11-24  Matthias Welwarsky <matthias@welwarsky.de>

	* : cortex_a: replace cortex_a_check_address function When accessing memory through the ARM core, privilege levels and mmu
	access permissions observed. Thus it depends on the current mode of
	the ARM core whether an access is possible or not. the ARM in USR
	mode can not access memory mapped to a higher privilege level. This
	means, if the ARM core is halted while executing at PL0, the
	debugger would be prevented from setting a breakpoint at an address
	with a higher privilege level, e.g. in the OS kernel. This is not
	desirable.  cortex_a_check_address() tried to work around this by predicting if
	an access would fail and switched the ARM core to SVC mode. However,
	the prediction was based on hardcoded address ranges and only worked
	for Linux and a 3G/1G user/kernel space split.  This patch changes the policy to always switch to SVC mode for
	memory accesses. It introduces two functions
	cortex_a_prep_memaccess() and cortex_a_post_memaccess() which
	bracket memory reads and writes. These function encapsulate all
	actions necessary for preparation and cleanup.  Change-Id: I4ccdb5fd17eadeb2b66ae28caaf0ccd2d014eaa9 Signed-off-by:
	Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on:
	http://openocd.zylin.com/3119 Reviewed-by: Paul Fertser
	<fercerpav@gmail.com> Tested-by: jenkins

2015-10-29  Matthias Welwarsky <matthias@welwarsky.de>

	* : cortex_a: force cache and tlb bypass when cpu is in debug state for minimal impact on the hardware state, force all memory accesses
	to bypass the caches and tlbs. This may actually be the default, but
	ARM recommends in DDI0406C to set proper default values on debug
	init.  Change-Id: If5ac097b6ee725c047b1e86c2f90eabe16b98c7b Signed-off-by:
	Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on:
	http://openocd.zylin.com/3079 Reviewed-by: Paul Fertser
	<fercerpav@gmail.com> Tested-by: jenkins

2015-10-18  Matthias Welwarsky <matthias@welwarsky.de>

	* : cortex_a: Update instruction cache after setting a soft
	breakpoint Call armv7a_l1_d_cache_flush_virt() before writing the breakpoint,
	to make sure the d-cache is clean and invalid at the breakpoint
	location down to PoC.  Call armv7a_l1_d_cache_inval_virt() after writing the breakpoint
	again, so that d-cache will pick up the modified code.  Call
	armv7a_l1_i_cache_inval_virt() after writing the breakpoint to
	memory to make the change visible to the CPU.  Change-Id: I24fc27058d99cb00d7f6002ccb623cab66b0d234 Signed-off-by:
	Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on:
	http://openocd.zylin.com/3033 Reviewed-by: Paul Fertser
	<fercerpav@gmail.com> Tested-by: jenkins

2015-10-16  Matthias Welwarsky <matthias@welwarsky.de>

	* : armv7a: fix debug messages regarding cache on/off state Cache bits are not level specific, remove "l1" from debug message.
	Also, fix data/instruction mixup in armv7a_l1_i_cache_sanity_check() Change-Id: I259665ffe62c7ada5b4f98d3fd907e93662d4091 Signed-off-by:
	Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on:
	http://openocd.zylin.com/3028 Reviewed-by: Paul Fertser
	<fercerpav@gmail.com> Tested-by: jenkins

2015-10-16  Matthias Welwarsky <matthias@welwarsky.de>

	* : armv7a: add d-cache virtual address range flush function This patch adds a function for cleaning & invalidating a virtual
	address range from the architecture caches down to the point of
	coherence.  Change-Id: I4061ab023a3797fabc967f3a34498034841d52c6 Signed-off-by:
	Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on:
	http://openocd.zylin.com/3026 Reviewed-by: Paul Fertser
	<fercerpav@gmail.com> Tested-by: jenkins

2015-10-16  Matthias Welwarsky <matthias@welwarsky.de>

	* : armv7a: fix handling of inner caches ARMv7 architecture allows up to 7 cache levels that are
	architecturally visible, as opposed to "system caches", which are
	outside of the domain defined by ARMv7 and require separate
	management. This patch enables detection and identification of
	caches at all levels. It also implements a new "flush-all" function
	that cleans & invalidates all cache levels to the "Point of
	Coherence".  Change-Id: Ib77115d6044d39845907941c6f031e208f6e0aa5 Signed-off-by:
	Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on:
	http://openocd.zylin.com/3024 Reviewed-by: Paul Fertser
	<fercerpav@gmail.com> Tested-by: jenkins

2015-10-15  Matthias Welwarsky <matthias@welwarsky.de>

	* : armv7a: rename l2_cache to outer_cache The outer cache is not necessarily at L2 in a system. Rename
	functions to make that clear.  Change-Id: Ia636a4844f50634f2bdf5cdce285febc1a47c11f Signed-off-by:
	Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on:
	http://openocd.zylin.com/3020 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-04-23  Oleksij Rempel <linux@rempel-privat.de>

	* : add armv7a_cache handlers This patch introduces, new command set and handlers for l1 and l2x
	caches.  Patch set 10 folded the following changes into this one: Ib1a2a1fc1b929dc49532ac13a78e8eb796ab4415
	If8d87a03281d0f4ad402909998e7834eb4837e79
	I0749f129fa74e04f4e9c20d143a744f09ef750d8 Change-Id: I849f4d1f20610087885eeddefa81d976f77cf199 Signed-off-by:
	Oleksij Rempel <linux@rempel-privat.de> Signed-off-by: Matthias
	Welwarsky <matthias@welwarsky.de> Reviewed-on:
	http://openocd.zylin.com/2800 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-05-18  Oleksij Rempel <linux@rempel-privat.de>

	* : cortex_a: add cortex_a_[read|write]_buffer Change-Id: I82011822d913aa7228f5c6262b540156494bedfe Signed-off-by:
	Oleksij Rempel <linux@rempel-privat.de> Reviewed-on:
	http://openocd.zylin.com/2797 Reviewed-by: Paul Fertser
	<fercerpav@gmail.com> Tested-by: jenkins

2015-05-15  Oleksij Rempel <linux@rempel-privat.de>

	* : cortex_a: remove ahb support for phys_memory access Change-Id: I5b7c21c16e95cc1a3160e356d6e64f1f8c449e6e Signed-off-by:
	Oleksij Rempel <linux@rempel-privat.de> Reviewed-on:
	http://openocd.zylin.com/2795 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-09-21  Marc Schink <openocd-dev@marcschink.de>

	* : jlink: Retrieve maximum speed from device.  If supported, the maximum transport speed is now retrieved from the
	device.  Change-Id: I614f405ec91cf199c851781785fd26cbd10c37a6 Signed-off-by:
	Marc Schink <openocd-dev@marcschink.de> Reviewed-on:
	http://openocd.zylin.com/2955 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-05-27  Jakub Kubiak <jakub@kubiak.es>

	* : flash/nor/lpc2000: add alternative part ID for LPC1343 http://support.code-red-tech.com/CodeRedWiki/DebugAccessChip > Note
	that once you have recovered debug access to your MCU, then in most
	cases you should then modify your Debug Configuration to turn vector
	catch off again. If this is not done, then this can cause problems
	in some circumstances with some versions of the Code Red IDE. For
	example with NXP LPC13xx parts, connecting more than once to the MCU
	with vector catch enabled can lead to the part ID being incorrectly
	read - which can again cause debug connections to fail This patch
	adds an alternative part ID for LPC1343. With this patch "program"
	command works fine for flashing.  Change-Id: I8632e898a4c33102455925d25715b4f4edfa1d97 Signed-off-by:
	Jakub Kubiak <jakub@kubiak.es> Reviewed-on:
	http://openocd.zylin.com/2782 Tested-by: jenkins Reviewed-by:
	Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2015-08-11  Karl Palsson <karlp@tweak.net.au>

	* : efm32: remove duplicate part name decoding.  The probe and info methods had duplicate sections decoding family
	names to generate a human friendly part name.  Extract this to a
	common helper.  Change-Id: I4c6309d83c601e154b7c14ad9c15c53854ee1e98 Signed-off-by:
	Karl Palsson <karlp@tweak.net.au> Reviewed-on:
	http://openocd.zylin.com/2932 Tested-by: jenkins Reviewed-by:
	Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2015-04-09  Felipe Balbi <balbi@ti.com>

	* : jtag: commands: save a pointer to list tail By saving a pointer to the tail of the list, we don't need to
	traverse the entire command queue before we're able to append an
	item to it.  With this patch, I see a 10% improvement when using the embedded
	XDS100v2 on AM437x IDK board to load a 4MiB binary (linux zImage) to
	DDR with load_image.  IOW, we went from ~305kB/sec to ~336kb/sec.  Change-Id: Idb55d49f0d0106043374ab520b2f3b6b32f2c50f Signed-off-by:
	Felipe Balbi <balbi@ti.com> Reviewed-on:
	http://openocd.zylin.com/2709 Tested-by: jenkins Reviewed-by: Stian
	Skjelstad <stian@nixia.no> Reviewed-by: Daniele Emancipato
	<daniele12457@hotmail.com> Reviewed-by: Matthias Welwarsky
	<matthias@welwarsky.de> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2015-08-27  Paul Fertser <fercerpav@gmail.com>

	* : svf: fix off-by-one error in line numbers as output to user This makes SVF error output match actual line numbers in the file
	processed.  Change-Id: I1fa4b9d0891e4358b7beada516945d5331ebe182 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2945 Tested-by: jenkins

2015-11-17  Andreas Frber <afaerber@suse.de>

	* : tcl/target: Add Nordic nRF52 config Base config without flash support for now.  Change-Id: I96a5b6ad35e00dc706177ea9dbdffc384ae7f62b Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3110 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-10-27  Tomas Vanek <vanekt@fbl.cz>

	* : flash: at91samd: flash write code cleaning SAMD driver suffered from following problems: 1) Flash was erased as an integral part of flash write.  It was not
	documented so with usual workflow it resulted in erasing flash twice
	(and reducing flash lifespan) and in almost double flashing time.  2) Sector erase was silently skipped if "is_erased" flag was set.
	"is_erased" logic was not reliable, e.g. when a row write was
	aborted after successful write of some pages, sector was still
	considered as erased. "is_erased" flag could not cope with flash
	writes from a user program.  3) Writing of a block with start address unaligned to a flash page
	resulted in failed assert and OpenOCD abort.  4) Disabling cache in bit 18 of 16-bit halfword never worked.  MCU
	implements cache invalidate in hardware so there is no need to take
	care about. This bug was reported by Tony DiCola.  New code does not erase flash in write operation.  Instead it
	traditionally relies on erasing flash beforehand.  "is_erased" logic
	and cache disabling is completely removed.  It simplifies write
	procedure a lot and flash write is now faster.  The change partly solves ticket #109 SAMD/SAM4L driver doubles flash
	erase.  Change-Id: I582b497d01a351575533a1f8c9810a4413be0216 Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/3045 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-11-05  Tomas Vanek <vanekt@fbl.cz>

	* : jtag: cmsis-dap: Issue disconnect before reconnecting cmsis-dap protocol has both DAP_Connect and DAP_Disconnect commands.
	Logically if cmsis_dap_swd_switch_seq() calls DAP_Connect in
	connected state it should call DAP_Disconnect first.  Doing so surprisingly solves problems on Atmel EDBG with target
	SAMD/R/L/C.  Without this change SWD communication breaks after
	reset run/halt in config "reset_config srst_only" and reconnect
	trials repeatedly fail with "SWD ack not OK: 0 JUNK" Change-Id: Ie951098d5e0c83f388e2df414608aaabec2135c9 Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/3098 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-04-14  Paul Fertser <fercerpav@gmail.com>

	* : tcl/interface/ftdi: add 100ask's OpenJTAG config Schematics provided by Matthias Bock.  Change-Id: I3d00453fece3b4df58a53bee21fff646a8b71a34 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2718 Tested-by: jenkins

2015-10-18  Ragnar Sundblad <raggesu@gmail.com>

	* : topic: Interface config file for FTDI UM232H module Added interface config file for the FTDI FT232H based UM232H module.
	This should work with UM232H-B too, an even cheaper module, but that
	has not been tested.  Change-Id: Ifc312d6741da0b7862fe07d854023190d7afe251 Signed-off-by:
	Ragnar Sundblad <raggesu@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3031 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2015-08-23  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : stm32l4: Add cpu and stm32l4discovery board configuration.  Change-Id: I20d3fcee04516eb3b9bb22933e7e366eed0c0b2e Signed-off-by:
	Karl Palsson <karlp@tweak.net.au> Signed-off-by: Uwe Bonnes
	<bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/2942 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2015-01-09  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : tcl: Add default hooks for STM32F4x Set up PLL and increase clock at reset init.  Change-Id: I611bc6fb7c0c5afd8ed3f4ad8e64f3c7b981d31c Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/2609 Tested-by: jenkins Reviewed-by: Rémi
	PRUD'HOMME <prudhomme.remi@gmail.com> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2015-04-29  Rémi PRUD’HOMME <prudhomme.remi@gmail.com>

	* : Add config files for STM32F7-DISCO and STM327[4|5]6G-EVAL.  Change-Id: I0803939f0ab1de97e544ca0f1257daac11fb50de Signed-off-by:
	Rémi PRUD'HOMME <prudhomme.remi@gmail.com> Signed-off-by: Uwe
	Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/2754 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2015-01-21  Jeff Ciesielski <jeffciesielski@gmail.com>

	* : flash: New driver for XMC4xxx microcontroller family This is a complete flash driver for the Infineon XMC4xxx family of
	microcontrollers, based on the TMS570 driver by Andrey Yurovsky.
	The driver attempts to discover the particular variant of MCU via a
	combination of the SCU register (to determine if this is indeed an
	XMC4xxx part) and the FLASH0_ID register (to determine the variant).
	If this fails, the driver will not load.  The driver has been added
	to the README and documentation.  Tests: * Hardware: XMC4500 (XMC4500_relax), XMC4200 (XMC4200 enterprise) * SWD + JTAG * Binary: 144k, 1M Note: * Flash protect only partly tested. These parts only allow the flash   protection registers (UCB) to be written 4 times total, and my
	  devkits have run out of uses (more on the way) Future Work: * User 1/2(permalock) locking support via custom command * In-memory flash loader bootstrap (flashing is rather slow...) Change-Id: I1d3345d5255d8de8dc4175cf987eb4a037a8cf7f Signed-off-by:
	Jeff Ciesielski <jeffciesielski@gmail.com> Signed-off-by: Andreas
	Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/2488 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-11-02  Morgan Quigley <morgan@osrfoundation.org>

	* : tcl/board: add Atmel SAM V71 Xplained Ultra Tested with cmsis-dap using the EDBG chip on the board.  Change-Id: I3d398685c81e4701a9f6c1a66e60f7a87f839daa Signed-off-by:
	Morgan Quigley <morgan@osrfoundation.org> Reviewed-on:
	http://openocd.zylin.com/3092 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-11-04  Esben Haabendal <esben@haabendal.dk>

	* : cfi: Fix fallback to memory writes Change-Id: I2d09139b95ff62c62a0b071584e85a87494ed313 Signed-off-by:
	Esben Haabendal <esben@haabendal.dk> Reviewed-on:
	http://openocd.zylin.com/3095 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-07-17  Evan Hunter <ehunter@broadcom.com>

	* : Cortex A/R : Allow interrupt disable during single-step Example usage: 	cortex_a maskisr on 	cortex_a maskisr off 	cortex_r maskisr on 	cortex_r maskisr off Change-Id: I799288d9b848a06f561ba29ec1eb8e5eeace5685 Signed-off-by:
	Evan Hunter <ehunter@broadcom.com> Reviewed-on:
	http://openocd.zylin.com/2876 Tested-by: jenkins Reviewed-by:
	Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2015-10-16  Mahavir Jain <mjain@marvell.com>

	* : flash/nor/spi: Add GigaDevice gd25q16c/32c/128c flash support Change-Id: I44052fd3467d7e0bbdc038b815204e39fa499684 Signed-off-by:
	Mahavir Jain <mjain@marvell.com> Reviewed-on:
	http://openocd.zylin.com/3029 Tested-by: jenkins Reviewed-by:
	Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2015-10-07  Matthias Welwarsky <matthias@welwarsky.de>

	* : armv7a: re-read ttb information if ttbcr changes If ttbcr is changed after the debugger has examined a target for the
	first time, address translations may fail. This problem does not
	show up with Linux because it doesn't use ttbr1, but it shows with
	other OS that use this feature. If the debugger connects to the
	target while it's in u-boot, all address translations will fail
	after the OS has booted and the target can not be debugged.  This patch reads the ttbcr in armv7a_mmu_translate_va() and compares
	it a cached value. If a difference is detected, armv7a_read_ttbcr()
	is called to re-parse the ttb configuration and update the cache.  Change-Id: I1c3adf53ea9d748a0e1e3091d9581e5c43ed64e8 Signed-off-by:
	Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on:
	http://openocd.zylin.com/3005 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2015-10-31  Andreas Frber <afaerber@suse.de>

	* : tcl/board: Add LPC-Link2 config Tested with Olimex ARM-USB-TINY-H adapter (both JTAG and SWD).  Change-Id: Idc8a030e9692eec761d1e2485cbf9897660c0ca0 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3082 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2015-09-30  Thomas Schmid <thomas@rfranging.com>

	* : Kinetis: Disable watchdog on Kx devices when programming.  Kx devices with FTFA flash need the watchdog disabled when
	programming.  I tried to keep overhead as small as possible and
	re-use registers that were already inquired (e.g. sim_sdid).  Change-Id: Ibc29a26ec34102d78a6c3920dd16f63e134a8f6f Signed-off-by:
	Thomas Schmid <thomas@rfranging.com> Reviewed-on:
	http://openocd.zylin.com/2986 Tested-by: jenkins Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2015-10-06  Jonathan Larmour <jifl@eCosCentric.com>

	* : helper/options: Use OPENOCD_SCRIPTS dir if set.  This makes it easier to relocate the install tree of OpenOCD from
	where it was originally built (for example, if put onto a different
	machine), without having to change scripts or add something to the
	command line every time.  Change-Id: Ia5edf0eba166f7a999f267bd6a92402dab9b399e Signed-off-by:
	Jonathan Larmour <jifl@eCosCentric.com> Reviewed-on:
	http://openocd.zylin.com/3004 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-06-17  Oleksij Rempel <linux@rempel-privat.de>

	* : tcl/target|board: add config Atheros ar2313 Add configs for Atheros ar2313 MIPS based WiSoC and board based on
	this chip: Netgear WP102 Change-Id: Id93957b5d5851a272f15be35f9f448a9ce6d8a08 Signed-off-by:
	Oleksij Rempel <linux@rempel-privat.de> Reviewed-on:
	http://openocd.zylin.com/2835 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-10-03  Marc Schink <openocd-dev@marcschink.de>

	* : helper/log: Cleanup #includes.  Change-Id: Ie343524dd843d518086a86866391b5a34556082b Signed-off-by:
	Marc Schink <openocd-dev@marcschink.de> Reviewed-on:
	http://openocd.zylin.com/2996 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-10-02  Marc Schink <openocd-dev@marcschink.de>

	* : helper/fileio: Fix memory leak.  The memory leak occurs when opening a file fails. It can be
	reproduced by using the "flash verify_bank" command with a filename
	that does not exist.  Change-Id: I60b7b545c18793d750ff75d08124fde3f0aa6f64 Signed-off-by:
	Marc Schink <openocd-dev@marcschink.de> Reviewed-on:
	http://openocd.zylin.com/2998 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-04-01  Oleksij Rempel <external.Oleksij.Rempel@de.bosch.com>

	* : target: tell which target state is meant If we work on smp system, the output of step command will depend on
	Id of default target.  This patch adds additional information to
	help find what on which core is happening.  Example of LOG after this patch.  imx6.cpu.1: target state: halted
	^^^^^^^^^^ target halted in ARM state due to breakpoint, current
	mode: Supervisor cpsr: 0x60000093 pc: 0x80076c0c MMU: enabled,
	D-Cache: enabled, I-Cache: enabled imx6.cpu.0: target state: halted
	^^^^^^^^^^ target halted in ARM state due to debug-request, current
	mode: Supervisor cpsr: 0x20000193 pc: 0x802ccb6c MMU: enabled,
	D-Cache: enabled, I-Cache: enabled Change-Id: I536a2cce33b5ab10af9de2a43b9960320c17729f Signed-off-by:
	Oleksij Rempel <external.Oleksij.Rempel@de.bosch.com> Reviewed-on:
	http://openocd.zylin.com/2691 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-10-31  Andreas Frber <afaerber@suse.de>

	* : lpc4350_spifi_generic: Clean up work area size Since 2cbbe9a it was actually decreasing the configured work area
	size.  We could now do "set WORKAREASIZE 0x2000" before sourcing
	lpc4350.cfg, but there seems no point in doing so. Simply drop the
	configuration here.  Change-Id: I25b9dbbc007ba652b66099832198b7c329929858 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3086 Tested-by: jenkins Reviewed-by: Karl
	Palsson <karlp@tweak.net.au> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2015-10-31  Andreas Frber <afaerber@suse.de>

	* : lpc8xx: Allow CHIPNAME override Default to lpc8xx as before, but allow setting the actual CHIPNAME.  Change-Id: I5a48fa75c640440a0d4c3f2858653e94bed846d2 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3084 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2015-10-24  Maxime Coquelin <mcoquelin.stm32@gmail.com>

	* : tcl: add STM32F469 discovery board config Change-Id: Iad7ee06330b3259ea0ce0d174dfdade6785913eb Signed-off-by:
	Maxime Coquelin <mcoquelin.stm32@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3043 Tested-by: jenkins Reviewed-by:
	Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2015-10-31  Matthias Welwarsky <matthias@welwarsky.de>

	* : board: don't hardcode interface for ti_beaglebone Board files should not select the interface. The BeagleBone Black is
	not limited to just one JTAG interface.  Change-Id: I71ccc3dd9e2ca331a436701fab04e548b0abf829 Signed-off-by:
	Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on:
	http://openocd.zylin.com/3083 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2015-10-05  Andrew Ruder <andrew.ruder@elecsyscorp.com>

	* : rtos: turn stack alignment into a function pointer Some targets (Cortex M) require more complicated calculations for
	turning the stored stack pointer back into a process stack pointer.
	For example, the Cortex M stores a bit in the auto-stacked xPSR
	indicating that alignment had to be performed and an additional 4
	byte padding is present before the exception stacking.  This change
	only sets up the framework for Cortex-M unstacking and does not add
	Cortex-M support.  Note: this also fixes the alignment calculation nearly addressed by
	change #2301 entitled rtos/rtos.c: fix stack alignment calculation.
	Updated calculation is in rtos_generic_stack_align.  Change-Id: I0f662cad0df81cbe5866219ad0fef980dcb3e44f Signed-off-by:
	Andrew Ruder <andrew.ruder@elecsyscorp.com> Cc: Paul Fertser
	<fercerpav@gmail.com> Cc: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Cc: Evan Hunter
	<evanhunter920@gmail.com> Cc: Jon Burgess <jburgess777@gmail.com>
	Reviewed-on: http://openocd.zylin.com/3002 Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins

2015-08-17  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : stm32f2x: Add memory barrier needed for STM32F7 flashing.  Change-Id: I44fca55c46fc8f960ba46a0604692ce98909face Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/2939 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2015-08-17  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : stm32f2x.c: Handle STM32F42x/43x 1 MiByte devices with DB1M
	option set.  Change-Id: Ic51d34a9abe9693fd21e9b3247523821b6fb1fe3 Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/2938 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-10-20  Andreas Frber <afaerber@suse.de>

	* : tcl/board: Add Diolan LPC4357-DB1 config Adapted from diolan_lpc4350-db1.cfg. Both boards are identical
	except for the SoC, so keep them in sync.  Change-Id: If892d8e953b0e3a9209a95b3b23a547357c10b7a Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3038 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2015-10-22  fenugrec <fenugrec@users.sourceforge.net>

	* : docs: added note for increasing gdb remotetimeout when using the
	"gdb_port pipe" command.  Change-Id: I9c9514a193fd65454890571a17373b9c64d84757 Signed-off-by:
	fenugrec <fenugrec@users.sourceforge.net> Signed-off-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/3040 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2015-10-11  Andreas Frber <afaerber@suse.de>

	* : tcl/board: Add Spansion SK-FM4-U120-9B560 config Change-Id: I01464b2a999890d50b95d0fb98ff46d8a04a2c57 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3009 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2015-10-20  Andreas Frber <afaerber@suse.de>

	* : fm4: Add JTAG support Add support for the JTAG TAPID found on SK-FM4-U120-9B560-MEM V1.1.0
	board.  Change-Id: Idbfe28927e0c549f0c89c29904d23971281927c9 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3039 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2015-10-11  Andreas Frber <afaerber@suse.de>

	* : fm4: Split out S6E2CC family config Its memory layout is different from MB9BFxxx.  Change-Id: I39c9f9cf582cd182971a9f83bb88c7a18da6cf15 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3007 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2015-10-29  Andreas Frber <afaerber@suse.de>

	* : tcl/target: Add Exynos5250 config Change-Id: Ia673d3f16b2238d5af8fbeff2d57c6cf27dcffb1 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/3080 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2015-05-10  Andreas Frber <afaerber@suse.de>

	* : tcl/target: Add config for XMOS XS1-XAU8A-10's ARM core The XS1-XAU8A-10 has 8 xCORE cores and one ARM core.  This config
	represents the ARM Cortex-M3 core, which is apparently Silicon Labs
	EFM32 Giant Gecko IP.  Change-Id: I998360f096c759d2e274d96c1ca2e0450ba61146 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/2762 Tested-by: jenkins Reviewed-by:
	Oleksij Rempel Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
	Reviewed-by: Paul Fertser <fercerpav@gmail.com>

2015-09-27  Tim 'mithro' Ansell <mithro@mithis.com>

	* : tcl: Support for reading "Device DNA" from Spartan 6 devices.  Most Xilinx FPGA devices contain an embedded, unique device
	identifier called the "Device DNA". The identifier is nonvolatile,
	permanently programmed into the FPGA, and is unchangeable providing
	a great serial / tracking number.  Debugging was done in
	https://github.com/timvideos/HDMI2USB/issues/36 Change-Id: Iad03eafb40887f0321a4dc22858a7c3bf37a12b3 Signed-off-by:
	Tim 'mithro' Ansell <mithro@mithis.com> Reviewed-on:
	http://openocd.zylin.com/2960 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-09-27  Tim 'mithro' Ansell <mithro@mithis.com>

	* : tcl: Adding the Digilent Atlys board.  The board is supported via the ixo-usb-jtag firmware.  Change-Id: I1e8a5ead850c0843b8532a5b54a7e7117778278e Signed-off-by:
	Tim 'mithro' Ansell <mithro@mithis.com> Reviewed-on:
	http://openocd.zylin.com/2962 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-08-13  Peter A. Bigot <pab@pabigot.com>

	* : nrf51: recognize hwid 0084 Chip markings: N51822 / QFACA1 / 1513AN Change-Id: Idb7fc723850ea08b60b9f5c97a53f1ae8dfc8eb2 Signed-off-by:
	Peter A. Bigot <pab@pabigot.com> Reviewed-on:
	http://openocd.zylin.com/2936 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-09-24  Tomas Vanek <vanekt@fbl.cz>

	* : Kinetis: give a reasonable default for max_flash_prog_size max_flash_prog_size euals to pflash_sector_size_bytes for most of
	devices.  There is no point setting max_flash_prog_size for devices
	without FS_PROGRAM_SECTOR capability.  Check for zero sector_size to
	avoid div by zero exception in case of device has FlexNVM but the
	driver does not define nvm_sector_size_bytes Change-Id: Iaf4e007fb1ec3d24c373350410e4bebe504a4c3e Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/2958 Tested-by: jenkins Reviewed-by: Thomas
	Schmid <thomas@rfranging.com> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-by: Patrick Stewart
	<patstew@gmail.com>

2015-09-02  Alex Forencich <alex@alexforencich.com>

	* : flash/nor/spi: Add Winbond w25q128fv Change-Id: I2e13c02361982468f41f218421ece9046bcc9a5f Signed-off-by:
	Alex Forencich <alex@alexforencich.com> Reviewed-on:
	http://openocd.zylin.com/2951 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-09-11  Jim Paris <jim@jtan.com>

	* : stlink_usb: fix typo Change-Id: I3cf5ced568319878b8bf40743e4c07718f630c68 Signed-off-by:
	Jim Paris <jim@jtan.com> Reviewed-on: http://openocd.zylin.com/2953
	Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de>
	Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

2015-06-04  Nemui Trinomius <nemuisan_kawausogasuki@live.jp>

	* : numicro: Integrate Nuvoton NuMicro flash driver.  Flash driver "mini51.c" and "nuc1x.c" are same target MCU.  This
	patch integrates each driver and functions, and makes into new
	"NuMicro" flash driver.  Change-Id: Ifff5c1cfdd265acca0f489631695be9194fa144c Signed-off-by:
	Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on:
	http://openocd.zylin.com/2794 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-04-23  Andreas Frber <afaerber@suse.de>

	* : tcl/board: Add Parallella-I board config Tested with Porcupine-1 JTAG adapter board and Digilent JTAG-HS3
	interface; reset does not yet work, pending nSRST configuration of
	the interface used.  Change-Id: I0d0679e098d93ffbd1539004cdb900e2a8ae4a25 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/2730 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-04-23  Andreas Frber <afaerber@suse.de>

	* : tcl/interface/ftdi: Add Digilent JTAG-HS3 config Derived from tcl/interface/digilent-hs1.cfg.  JTAG-HS3 has an open drain buffer on pin 14 for SRST to work with
	PS_SRST_B on Xilinx Zynq SoC.  Change-Id: I1e9e72d0511528a61207e318aff937ae9fad5bf9 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/2728 Tested-by: jenkins Reviewed-by: Robert
	Jordens <jordens@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2015-06-23  Philipp Wagner <philipp.wagner@tum.de>

	* : tcl_server: Support line buffers up to 4M (v3) Currently, the maximum size of a command sent to the TCL server is
	4k. This patch increases this limit up to 4M.  Reasoning: To get high-speed JTAG data transfers, I'm using a very
	long shift register. This reduces the overhead of the state changes,
	as well as the latency due to the common USB adapter transfers
	considerably. In order to submit those long DRSCAN commands to
	OpenOCD over the TCL/TCL interface, long TCL command lines are
	required. This is enabled by this patch.  v3: Address review comments. Drop line instead of connection when
	realloc() fails.  Changes in v2 of this patch: The line buffer is allocated
	dynamically to avoid an OpenOCD memory overhead if the large buffers
	are not used. The buffer starts at 4K and increases exponentially up
	to 1M, and then linearly in 1M increments up to 4M.  Change-Id: Iecaef6a56ed5e18e9de4d912a514031ea78fa3bd Signed-off-by:
	Philipp Wagner <philipp.wagner@tum.de> Reviewed-on:
	http://openocd.zylin.com/2837 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2015-03-09  Austin Morton <austinpmorton@gmail.com>

	* : server: tcl_trace command Implements async target trace output to the tcl server Change-Id: I0178f6404447337d523782a1d2c317457030da40 Signed-off-by:
	Austin Morton <austinpmorton@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2588 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-07-30  Paul Fertser <fercerpav@gmail.com>

	* : svf: flush the queue before reallocing memory During reallocation a new memory region might be allocated and the
	old one freed. If jtag queue is holding a pointer to the old memory,
	it will segfault during the execution. Avoid this by flushing the
	queue before a reallocation attempt is made.  This should fix ticket #102.  Change-Id: I737fc3f1ebf6d76413a475beb8bf20184fe0233f Reported-by:
	Alex Forencich <aforencich@users.sf.net> Signed-off-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2899
	Tested-by: jenkins Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2015-07-16  Evan Hunter <ehunter@broadcom.com>

	* : gdb_server: Add check for malloc fail Change-Id: I623b30883042eae3253ed29de5c426da760dffa0 Signed-off-by:
	Evan Hunter <ehunter@broadcom.com> Reviewed-on:
	http://openocd.zylin.com/2871 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-06-10  Andrey Yurovsky <yurovsky@gmail.com>

	* : at91samd: add chip IDs for SAMC20 and SAMC21 families Add the chip IDs corresponding to the new 5V "SAMC" parts which are
	otherwise identical to the SAMD and should work with this driver.
	Also add the configurations for their Xplained Pro boards.  Change-Id: Ic268d4ac384a3a77d4211a94da9f9faf4d8c0f7b Signed-off-by:
	Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2809 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-07-02  Robert Jordens <jordens@gmail.com>

	* : kc705: digilent-jtag/kintex7/jtagspi board Xilinx Kintex7 Development board with integrated Digilent JTAG-SMT1
	(a.k.a. HS1) interface and a 128 MBit SPI flash.  Change-Id: I9daba0a2fb2c17e04bcb37bd41872ebde25e0d2f Signed-off-by:
	Robert Jordens <jordens@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2861 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-07-01  Robert Jordens <jordens@gmail.com>

	* : flash/nor/jtagspi: add JTAGSPI driver Many FPGA board speak JTAG and have a SPI flash for their bitstream
	attached to them. The SPI flash is programmed by first uploading a
	proxy bitstream to the FPGA that connects the JTAG interface to the
	SPI interface if the IR contains a certain USER instruction. Then
	the SPI flash can be erase, written, read directly through the JTAG
	DR.  The JTAG and SPI signaling is compatible. Such a proxy bitstream
	only needs to connect TDO-MISO, TDI-MOSI, TCK-CLK, and the activate
	the chip select when the IR contains the special instruction and the
	JTAG state machine is in the DR-SHIFT state.  Change-Id: Ibc21d793a83b36fa37e2704966aa5c837c4dd0d2 Signed-off-by:
	Robert Jordens <jordens@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2844 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-07-02  Robert Jordens <jordens@gmail.com>

	* : cpld/virtex2: allow JSTART to be disabled This adds an option to disable the use of the JSTART instruction
	when loading bitstreams to xilinx fpgas. JSTART apparently prevents
	configuration if the startup clock is not set to the jtag clock in
	the bitstream.  xc3sprog is omitting JSTART for all devices. Problems with loading a
	bitstream that does not have StartupClk:JTAGClk are described here:
	http://www.xilinx.com/support/answers/56151.html Change-Id: I8137c0bae05a8c3c6f8e2611869f70a770d1651d Signed-off-by:
	Robert Jordens <jordens@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2860 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-06-30  Robert Jordens <jordens@gmail.com>

	* : target/testee: manage target->state The testee target is usefull for certain non-cpu pass-through
	situations, for example in the case of a spi flash mapped to the DR
	of a JTAG tap, as is the case for most FPGAs with SPI flashs behind
	them.  We just manage the RUNNING/RESET/HALTED state in the testee driver
	to support it being halted which is a requirement for flash banks.  Change-Id: I1b4d52c58a1f6bd753e126bfde74dcc5164d7b69 Signed-off-by:
	Robert Jordens <jordens@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2840 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-05-14  Andreas Frber <afaerber@suse.de>

	* : tcl/target: Add Freescale Vybrid VF6xx config This covers only the Cortex-A5 for now, not the Cortex-M4.  Change-Id: I739ec52b14b83d6e9f124ed61f8941502e481402 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/2766 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-05-17  Kyle Manna <kyle@kylemanna.com>

	* : udev: Add J-Link on-board nRF51-DK * Add USB VID and PID for the J-Link interface running on the Nordic   Semiconductor nRF51-DK.  Also tested with debug out port to debug   external boards.  * Fixes permissions problems.  Change-Id: I01ffc3150fa2af92d399b50e0195dc255a40ec42 Signed-off-by:
	Kyle Manna <kyle@kylemanna.com> Reviewed-on:
	http://openocd.zylin.com/2774 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-07-02  Alexander Drozdov <adrozdoff@gmail.com>

	* : RTOS: ThreadX support on ARM926E-JS ThreadX uses two stacking schemas on ARM926E-JS, extend API to use
	more then one stecking at time.  Change-Id: I92d445ad0981b6409ea4c4e7e438d3a7ae39cbe7 Signed-off-by:
	Alexander Drozdov <adrozdoff@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2848 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-05-25  Paul Fertser <fercerpav@gmail.com>

	* : manual: make it compatible with ancient texinfo versions that
	lack @raggedright This is needed to unbreak build on systems that ship texinfo version
	4.x.  Change-Id: Ie665d29b02bb65da7e8ed0d48d17fa56e231bd0d Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2781 Tested-by: jenkins Reviewed-by: David
	Ung <davidu@nvidia.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk> Reviewed-by: Oleksij Rempel

2015-05-18  Paul Fertser <fercerpav@gmail.com>

	* : The openocd-0.9.0 release Signed-off-by: Paul Fertser <fercerpav@gmail.com>

2015-05-10  Paul Fertser <fercerpav@gmail.com>

	* : jtag/drivers/stlink: fix SRST issue with stlink-v1 Even though the latest firmware version for stlink-v1 supports "v2"
	JTAG API, the hardware SRST handling is still broken; amend the
	check accordingly.  Change-Id: I62c662cd7aa209d2d6e9fe260f5c0be81d0ce672 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2761 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-03-10  Peter A. Bigot <pab@pabigot.com>

	* : nrf51: refine and extend known devices table The notation Gx0 in the nRF51 Series Compatibility Matrix indicates
	that the specified HWID is valid only for build code 0 of each chip,
	and for subsequent builds the HWID will be different.  Replace the
	Gx0 notation with G0 throughout, and add the missing HWID for
	nRF51422 QFAC A1 (present on the newer nRF51 developer boards).  See:

	https://www.nordicsemi.com/eng/nordic/download_resource/41917/5/55913589See:

	https://devzone.nordicsemi.com/question/30774/mapping-hwid-to-revision-information/Change-Id: I79d842137d41342db35904867c48b06fbc6fbc70 Signed-off-by:
	Peter A. Bigot <pab@pabigot.com> Signed-off-by: Angus Gratton
	<gus@projectgus.com> Reviewed-on: http://openocd.zylin.com/2593
	Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>

2015-05-02  Austin Morton <austinpmorton@gmail.com>

	* : server: avoid the tcl server crashing when there is no target Since commit 1d0cf0df37a4e831ca3121ba8987d5848cad3e42 ("server:
	tcl_notifications command") connecting to the tcl server would
	terminate openocd. Fix this.  Change-Id: I36e2a7482f7db3a30ff7e9f969c3b6cda9599382 Signed-off-by:
	Austin Morton <austinpmorton@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2759 Tested-by: jenkins Reviewed-by: Forest
	Crossman <cyrozap@gmail.com> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2015-05-16  Paul Fertser <fercerpav@gmail.com>

	* : manual: fix usb_blaster_pin command syntax and description Change-Id: If3fbb2fe4f1842bea3962a6b903fd16aa9e8b545 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2771 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2015-05-15  Paul Fertser <fercerpav@gmail.com>

	* : manual: reorder flash driver info Put all the individual driver descriptions to where they really
	belong, fix sectioning etc.  Change-Id: I94dc09e9a296ec57db4475f8dfb0a7d62a754aa4 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2770 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2015-05-15  Paul Fertser <fercerpav@gmail.com>

	* : manual: remove the lists of config files Directory listings are volatile and serve no purpose in the manual.
	Just remove them.  Change-Id: I63d54ba209c29eafb6608cf406b8ce5d8e9ee6c8 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2768 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2015-04-24  Paul Fertser <fercerpav@gmail.com>

	* : The openocd-0.9.0-rc1 release candidate Signed-off-by: Paul Fertser <fercerpav@gmail.com>

2015-04-24  Paul Fertser <fercerpav@gmail.com>

	* : jtag/drivers/ti_icdi: do not segfault when adapter can't be
	opened Change-Id: Id3af8dfd18b13947bca4f3c89c2516ccbcef60b6 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2742 Tested-by: jenkins

2014-05-02  Jiri Kastner <cz172638@gmail.com>

	* : target/ti_tms570.cfg: added several JTAG IDs for TMS570LS family from TI datasheets for whole cortex-r4 family added JTAG IDs TMS570LS1227 16- and 32-Bit RISC Flash Microcontroller (Rev. A)
	http://www.ti.com/lit/pdf/spns192 	0x0B95502F 16/32-Bit RISC Flash Microcontroller, TMS5703137-EP (Rev. B)
	http://www.ti.com/lit/pdf/spns230 	0x0D8A002F 	0x2D8A002F 	0x3D8A002F RM48L952 16- and 32-Bit RISC Flash Microcontroller (Rev. B)
	http://www.ti.com/lit/pdf/spns177 	0x0D8A002F 	0x2D8A002F 	0x3D8A002F RM46L852 16- and 32-BIT RISC Flash Microcontroller (Rev. A)
	http://www.ti.com/lit/pdf/spns185 	0x0B95502F RM48Lx30 16- and 32-Bit RISC Flash Microcontroller (Rev. A)
	http://www.ti.com/lit/pdf/spns176 	0x0B8A002F 	0x2B8A002F 	0x3B8A002F RM46Lx30 16- and 32-BIT RISC Flash Microcontroller (Rev. A)
	http://www.ti.com/lit/pdf/spns182 	0x0B95502F RM46Lx50 16- and 32-BIT RISC Flash Microcontroller (Rev. A)
	http://www.ti.com/lit/pdf/spns184 	0x0B95502F TMS570LS04x/03x 16- and 32-BIT RISC Flash Microcontroller (Rev. A)
	http://www.ti.com/lit/pdf/spns186 	0x0B97102F RM42L432 16- and 32-BIT RISC Flash Microcontroller (Rev. A)
	http://www.ti.com/lit/pdf/spns180 	0x0B97102F RM46Lx40 16- and 32-BIT RISC Flash Microcontroller (Rev. A)
	http://www.ti.com/lit/pdf/ 	0x0B95502F TMS570LS12x5 16- and 32-BIT RISC Flash Microcontroller (Rev. A)
	http://www.ti.com/lit/pdf/spns191 	0x0B95502F RM48Lx40 16- and 32-Bit RISC Flash Microcontroller (Rev. A)
	http://www.ti.com/lit/pdf/spns175 	0x0B8A002F 	0x2B8A002F 	0x3B8A002F TMS570LS31x4/21x4 16- and 32-Bit RISC Flash Microcontroller (Rev. A)
	http://www.ti.com/lit/pdf/spns165 	0x0B8A002F 	0x2B8A002F 	0x3B8A002F TMS570LS20216/20206/10216/10206/10116/10106 16/32-Bit RISC Flash
	Microcontroller (Rev. F) http://www.ti.com/lit/pdf/spns141 	0x0B7B302F TMS570LS31x5/21x5 16- and 32-Bit RISC Flash Microcontroller (Rev. B)
	http://www.ti.com/lit/pdf/spns164 	0x0B8A002F 	0x2B8A002F 	0x3B8A002F RM48Lx50 16- and 32-Bit RISC Flash Microcontroller (Rev. A)
	http://www.ti.com/lit/pdf/spns174 	0x0B8A002F 	0x2B8A002F 	0x3B8A002F TMS570LS3137 16- and 32-Bit RISC Flash Microcontroller (Rev. B)
	http://www.ti.com/lit/pdf/spns162 	0x0B8A002F 	0x2B8A002F 	0x3B8A002F TMS570LS12x4 16- and 32-BIT RISC Flash Microcontroller (Rev. A)
	http://www.ti.com/lit/pdf/spns190 	0x0B95502F TMS570LS1115 16- and 32-Bit RISC Flash Microcontroller (Rev. A)
	http://www.ti.com/lit/pdf/spns189 	0x0B95502F TMS570LS11x4 16- and 32-BIT RISC Flash Microcontroller (Rev. A)
	http://www.ti.com/lit/pdf/spns188 	0x0B95502F Change-Id: Idf53a44851e1bb4bde4a74c64b65d4411e56da7c Signed-off-by:
	Jiri Kastner <cz172638@gmail.com> Tested-by: Jiri Kastner
	<cz172638@gmail.com> Reviewed-on: http://openocd.zylin.com/2123
	Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>

2015-04-24  Paul Fertser <fercerpav@gmail.com>

	* : rtos/mqx: prevent crash with -rtos auto Since mqx comes last in the list, with the auto option its
	update_threads is called even though it wasn't detected.  This check should be removed from all the rtos helpers and moved to
	the generic code, but better do it later all in one go.  Change-Id: If24ab42a58a468d90e9f12028d4c2fb76a9bc2e8 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2741 Tested-by: jenkins

2015-04-17  Paul Fertser <fercerpav@gmail.com>

	* : target: try to reexamine even when polling fails After intermittent connection failures or target power failures it
	might be necessary to try reexamination even when polling fails.
	This should make communication with Cortex-A targets more reliable.  This was runtime tested with stlink attached to an stm32l1 and an
	FTDI JTAG adapter attached to an stm32f1 target.  Change-Id: I38c4db8124b7f4bbf53ddda53c13273449f49c15 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2721 Tested-by: jenkins Reviewed-by: Felipe
	Balbi <balbi@ti.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
	Reviewed-by: Andreas Färber <afaerber@suse.de>

2015-03-17  Simon Qian <openocd@versaloon.com>

	* : configure the SWD frequency when setting adapter speed in SWD
	mode for versaloon Change-Id: I99cdc11ba1442e4c9efaa0f1de8e7089ec725e14 Signed-off-by:
	Simon Qian <openocd@versaloon.com> Reviewed-on:
	http://openocd.zylin.com/2608 Tested-by: jenkins Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2015-04-09  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : stlink_usb.c: Decode some more errors.  Change-Id: I637cb63bd39120554aa184eaa48fd00a4852359f Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/2706 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-04-08  Marc Schink <openocd-dev@marcschink.de>

	* : flash: efm32: Add support for EZR32LG and EZR32WG.  This patch was tested with an EZR32WG Starter Kit.  Change-Id: I0f7c619e715fe30e88e6da3bead0806dd3bce819 Signed-off-by:
	Marc Schink <openocd-dev@marcschink.de> Reviewed-on:
	http://openocd.zylin.com/2700 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-04-10  Spencer Oliver <spen@spen-soft.co.uk>

	* : cmsis-dap: print vendor and product id on open failure Change-Id: Iae7ed8d59a722b805536550a8033f5fb7c85c5fc Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/2708 Tested-by: jenkins Reviewed-by: Andrey
	Yurovsky <yurovsky@gmail.com>

2015-04-09  Paul Fertser <fercerpav@gmail.com>

	* : tcl/target/stm32f3: fix reset init for stlink Use mmw to manipulate only selected bits of the word. msb and mwb
	verify the memory location and may error on PLLRDY set as a result
	of PLLON written.  Change-Id: I9a4c1e58f002a1e5e99be1bd34aac27ba65d111d Reported-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2702 Tested-by: jenkins

2015-03-15  Paul Fertser <fercerpav@gmail.com>

	* : Fix several format specifiers errors exposed by arm-none-eabi Change-Id: I1fe5c5c0b22cc23deedcf13ad5183c957551a1b7 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2719 Tested-by: jenkins

2015-04-16  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : rtos: add instructions and helper code to make FreeRTOS work
	again Run-time tested with FreeRTOS V8.1.2 (current version).  For the time being I propose this way of dealing with RTOSes that do
	not export necessary information on their own.  I also suggest implementing a similar scheme for ChibiOS, exporting
	the necessary struct fields' offsets via an OpenOCD-specific helper.  Change-Id: Iacf8b88004d62206215fe80011fd7592438446a3 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Signed-off-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2347 Tested-by: jenkins

2015-03-14  Tomas Vanek <vanekt@fbl.cz>

	* : AT91SAM4L: handle reset run/halt in SMAP This is a remake of http://openocd.zylin.com/1966 originally written
	by Angus Gratton <gus@projectgus.com> ATSAM4L has a "System Manager Access Port" (SMAP) that holds the CPU
	in reset if TCK is low when srst (RESET_N) is deasserted.  Without
	this change any use of sysresetreq or srst locks the chip in reset
	state until power is cycled.  A new function smap_reset_deassert is called as reset-deassert-post
	event handler.  It optionally prepares reset vector catch and SMAP
	reset is released then.  Change-Id: Iad736357b0f551725befa2b9e00f3bc54504f3d8 Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/2604 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-03-14  Paul Fertser <fercerpav@gmail.com>

	* : target/cortex_a: emit a clear error message when dbgbase can't
	be detected In some cases (the most obvious are TI's SoCs) ROM table lacks
	entries for the cores, so OpenOCD has no way to determine what debug
	base to use. Due to an error fixed in ec9ccaa28849 it wasn't handled
	properly, and OpenOCD would continue to try using dbgbase = 0, which
	happened to work for e.g. AM437x.  This patch adds a clear indication to the user that to access such a
	target, dbgbase must be set manually in the config.  Reported by Felipe Balbi on IRC.  Change-Id: Id8533e708f44b76550eb8b659564f5f45717c298 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2603 Tested-by: jenkins

2015-04-06  Paul Fertser <fercerpav@gmail.com>

	* : jtag/adi_v5_jtag: fix infinite recursion in
	jtagdp_transaction_endcheck() Calling ahbap_debugport_init() is wrong here because the actions
	performed by it might lead to jtagdp_transaction_endcheck errors
	thus leading to infinite recursion.  The removed code is not needed now because target polling should
	lead to reexamination automatically, and both cortex_a and cortex_m
	call ahbap_debugport_init() as part of their target examine handler.  This was reported as a real life issue on IRC by Weaselweb with
	Cortex-A target. Quitte reports similar results in some
	circumstances (adapter_khz too high) with LPC17xx.  Change-Id: I7148022f76a1272b5262d251f2e807ffb1543547 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2697 Tested-by: jenkins

2015-04-03  Paul Fertser <fercerpav@gmail.com>

	* : jtag/startup.tcl: fix regression with autoselecting JTAG This regression was introduced with d90b86d8. "transport select"
	doesn't throw an error anymore and autoselects the first available
	transport on its own.  Reported by moyix on IRC.  Change-Id: I3f303c0372e915931cca4b28af450694abc1a63e Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2693 Tested-by: jenkins

2015-03-13  Paul Fertser <fercerpav@gmail.com>

	* : Tcl exception codes cleanup, shutdown command amendments This patch might influence openocd Tcl commands behaviour in subtle
	ways, please give it a nice testing.  The idea is that if an OpenOCD Tcl command returns an error, an
	exception is raised, and then the return code is propogated all the
	way up (or to the "catch" if present). This allows to detect
	"shutdown" which is not actually an error but has to raise an
	exception to stop execution of the commands that follow it in the
	script.  openocd_thread special-cases shutdown because it should then
	terminate OpenOCD with a success error code, unless shutdown was
	called with an optional "error" argument which means terminate with
	a non-zero exit code.  Change-Id: I7b6fa8a2e24c947dc45d8def0008b4b007c478b3 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2600 Tested-by: jenkins Reviewed-by: Juha
	Niskanen <juha.niskanen@haltian.com> Reviewed-by: Jens Bauer
	<jens@gpio.dk> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>

2015-02-26  Paul Fertser <fercerpav@gmail.com>

	* : jtag/tcl: fix incorrect memcpy in jim_newtap_expected_id Found by clang static checker.  On the very first call of jim_newtap_expected_id()
	pTap->expected_ids and expected_len are null, and there's nothing to
	copy. This patch changes this cryptic code to use realloc() instead.  Change-Id: Ic0b5140d08257a906f15b55a2ae64db7bc06d5f1 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2562 Reviewed-by: Stian Skjelstad
	<stian@nixia.no> Tested-by: jenkins

2015-03-17  Nemui Trinomius <nemuisan_kawausogasuki@live.jp>

	* : lpc2000: Removed cmd51_can_xxxxb variables.  Current flash driver can fail to write across the sector boundary.
	This patch fixes "thisrun_bytes" set to "cmd51_dst_boundary" value
	instead of "cmd51_can_xxxxb" Referred to SevenW's post and fix,thanks.

	http://sourceforge.net/p/openocd/mailman/openocd-devel/thread/fa32e7d6654df22470dc5f4a3dbc984a%40familiebenschop.nl/#msg33594152Tested on below listed chips.
	LPC810,LPC811,LPC812,LPC824,LPC1115,LPC1343,LPC1347,LPC1227,
	LPC1769,LPC1788,LPC54102,LPC4088 and LPC2388.  Change-Id: If1c6a1daa58ca27c405bd959a784e599a7a8f4d4 Signed-off-by:
	Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on:
	http://openocd.zylin.com/2607 Tested-by: jenkins Reviewed-by: Jens
	Bauer <jens@gpio.dk> Reviewed-by: Paul Fertser <fercerpav@gmail.com>

2015-03-23  Patrick Noffke <patrick@noffke.me>

	* : Added Atmel SAM4SA16C chip (chip ID 0x28a70ce0).  Change-Id: I45e8e807a36c39940b910b3edb40698c7d8dabd6 Signed-off-by:
	Patrick Noffke <patrick@noffke.me> Reviewed-on:
	http://openocd.zylin.com/2625 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-01-18  Andreas Frber <afaerber@suse.de>

	* : tcl/target: Add Infineon XMC1000 family target config Basic target config, verified against XMC1100 AA/AB, XMC1200 AA/AB,
	XMC1300 AA/AB manuals.  The default adapter_khz was tested with the XMC1100 Boot Kit.  Change-Id: Iff6ed52d875ccb83c0d4ff0d555b90e0f28b860c Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/2471 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-03-01  Andreas Frber <afaerber@suse.de>

	* : tcl/target: Add Spansion FM4 config Assembled by trial-and-error for an S6E2CC.  Change-Id: I317c12d24c9075ce3de286455fa3ee45731c5c81 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/2569 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-03-05  Ed Beroset <beroset@ieee.org>

	* : em357: Corrected EM357 support including errata details Original submitted code had only been tested with em358, but testing
	with actual em357 revealed errors that this patch corrects.  Change-Id: I70cf31210de8ed84e3755a56e76261ad200322bb Signed-off-by:
	Ed Beroset <beroset@ieee.org> Reviewed-on:
	http://openocd.zylin.com/2581 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-11-21  Evan Hunter <ehunter@broadcom.com>

	* : RTOS: Add logging to FreeRTOS and general RTOS Change-Id: I43d14f3b59daae7f90c344abdf71eaa8f74ef7ef Signed-off-by:
	Evan Hunter <ehunter@broadcom.com> Reviewed-on:
	http://openocd.zylin.com/2391 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-03-09  Paul Fertser <fercerpav@gmail.com>

	* : jtag/core: honour SRST timings in SWD mode Since SWD is currently abusing the JTAG command queue for reset and
	sleep handling (and all other operations are performed in a
	different way), sleep needs to be forced explicitly to ensure
	correct timings.  Change-Id: I5b0da6cbb7d0560154e4077b261aa6828cefc892 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2591 Tested-by: jenkins Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2015-02-28  Jeff Ciesielski <jeffciesielski@gmail.com>

	* : tcl/board: Add Infineon XMC4200 Application Kit config Change-Id: I3a946ba3745da651d470cd574222ba5c7147ac9d Signed-off-by:
	Jeff Ciesielski <jeffciesielski@gmail.com> Signed-off-by: Andreas
	Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/2566 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-01-18  Andreas Frber <afaerber@suse.de>

	* : tcl/target: Add Infineon XMC4000 family config Base config, verified against XMC4500, XMC4400 and XMC4100/XMC4200
	manuals.  Change-Id: I10907bdf307bc6d11dc5454bf5391758de49dc30 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/2480 Tested-by: jenkins Reviewed-by: Jeff
	Ciesielski <jeffciesielski@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2015-03-19  Felipe Balbi <balbi@ti.com>

	* : target: icepick: call icepick_c_setup it also works on icepick_d.  Change-Id: I50c0c81286aae673c94ea77e47454ff48eab1668 Signed-off-by:
	Felipe Balbi <balbi@ti.com> Reviewed-on:
	http://openocd.zylin.com/2623 Tested-by: jenkins Reviewed-by: Tom
	Rini <trini@konsulko.com> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2015-03-18  Felipe Balbi <balbi@ti.com>

	* : tcl: target: am437x: pass coreid This commit is only for the sake of completeness as default coreid
	is zero. In any case, coreids 1-4 are used for the different PRU
	cores inside the SoC.  Change-Id: I775f2f444b1a908ffaf7bdbc43bcc966f19668c4 Signed-off-by:
	Felipe Balbi <balbi@ti.com> Reviewed-on:
	http://openocd.zylin.com/2621 Tested-by: jenkins Reviewed-by: Tom
	Rini <trini@konsulko.com> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2015-03-18  Felipe Balbi <balbi@ti.com>

	* : target: am437x: fix DebugSS DAP ID Main DAP (where Cortex A9 sits) ID is actually 0x46b6902f. Fix it.  Change-Id: Ifa3335186bcf60d264d4ecea477bfe2f5ca10ead Signed-off-by:
	Felipe Balbi <balbi@ti.com> Reviewed-on:
	http://openocd.zylin.com/2619 Tested-by: jenkins Reviewed-by: Tom
	Rini <trini@konsulko.com> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2015-03-16  Felipe Balbi <balbi@ti.com>

	* : tcl: am437x: add reset-init event handler this event handler will configure and lock PLLs and configure DDR so
	platform is placed in usable state.  Change-Id: Idd02f4c9789181d69578f8606ac3576ea1dd8a0b Tested-by: Tom
	Rini <trini@konsulko.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
	Reviewed-on: http://openocd.zylin.com/2616 Tested-by: jenkins
	Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2015-03-16  Felipe Balbi <balbi@ti.com>

	* : tcl: am437x: define registers to be used later a later commit will implement a proper reset-init handler to lock
	pll and configure ddr as we should.  Change-Id: I432cf28a5a944bfa83c20aed7298dbd29df30e38 Tested-by: Tom
	Rini <trini@konsulko.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
	Reviewed-on: http://openocd.zylin.com/2614 Tested-by: jenkins
	Reviewed-by: Paul Fertser <fercerpav@gmail.com>

2015-03-13  Felipe Balbi <balbi@ti.com>

	* : tcl: board: ti_am437x_evm: select jtag transport default already is jtag, but this silences a warning during startup.  Change-Id: I94478327bbb259649500ef74a5b5c10d51e2a517 Signed-off-by:
	Felipe Balbi <balbi@ti.com> Reviewed-on:
	http://openocd.zylin.com/2612 Tested-by: jenkins Reviewed-by: Tom
	Rini <trini@konsulko.com> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2015-03-13  Felipe Balbi <balbi@ti.com>

	* : tcl: target: am437x.cfg: pass correct dbgbase Since commit ec9ccaa28849 (arm_adi_v5: make
	dap_lookup_cs_component() traverse subtables and handle multicore)
	AM437x devices can't be used with OpenOCD anymore. The reason is
	that dbgbase used to be set to zero before that commit and that just
	happens to work with AM437x devices.  A more robust solution is to pass correct dbgbase when creating the
	target, which this commit does.  Signed-off-by: Felipe Balbi <balbi@ti.com> Change-Id:
	Iaf2617804324de8094b25137943e08b84f14c75f Reviewed-on:
	http://openocd.zylin.com/2602 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-by: Tom Rini
	<trini@konsulko.com>

2015-02-26  Mateusz Manowiecki <segmentation@fault.pl>

	* : jtag/drivers/ftdi.c: removed memory leak swd_cmd_queue buffer memory leak removed Change-Id: Iafcdf034d32a37d577b58b6256c8fd9b064ce228 Signed-off-by:
	Mateusz Manowiecki <segmentation@fault.pl> Reviewed-on:
	http://openocd.zylin.com/2563 Tested-by: jenkins Reviewed-by:
	Andreas Färber <afaerber@suse.de> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2015-03-08  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : Add configuration for EFM32 Gecko boards with Segger J-Link.  Tested with Tiny Gecko.  Change-Id: Iddb87170b6aaaf7f15d3c4517c8661dd6394be8f Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/2585 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-02-25  Angus Gratton <gus@projectgus.com>

	* : transport: make 'transport select' auto-select the first
	available transport if not set This should allow most of the existing configurations for older
	versions to remain compatible without forcing the user to change his
	or her config to explicitly select transport.  Also in some circumstances can remove the need to chain a "-c
	transport select X" when building custom configs on the command
	line, which seems like a common new user pitfall.  Change-Id: Ic87a38c0b9b88e88fb6d106385efce2f39381d3d Suggested-by:
	Petteri Aimonen <jpa@git.mail.kapsi.fi> Signed-off-by: Angus Gratton
	<gus@projectgus.com> Reviewed-on: http://openocd.zylin.com/2551
	Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins
	Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

2014-10-26  Paul Fertser <fercerpav@gmail.com>

	* : drivers/cmsis-dap: port to common SWD framework Valgrind-tested.  Comparison of flashing performance on an FRDM-KL25Z board running
	mbed CMSIS-DAP variant, 5MHz clock, old driver: wrote 28096 bytes from file demo.elf in 26.833590s (1.023 KiB/s)
	verified 27264 bytes in 1.754972s (15.171 KiB/s) this implementation: wrote 28096 bytes from file demo.elf in 3.691939s (7.432 KiB/s)
	verified 27264 bytes in 0.598987s (44.450 KiB/s) Also tested "Keil ULINK-ME CMSIS-DAP" with an STM32F100 target, 5MHz
	clock, results reading from flash, old driver: dumped 131072 bytes in 98.445305s (1.300 KiB/s) this implementation: dumped 131072 bytes in 8.242686s (15.529 KiB/s) Change-Id: Ic64d3124b1d6cd9dd1016445bb627c71e189ae95 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2356 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-03-10  Paul Fertser <fercerpav@gmail.com>

	* : flash/nor/kinetis: do not attempt mass-erase in place of a bank
	erase Many kinetis parts come in multi-bank configuration, so this
	optimisation here can't be performed safely.  Investigated and fixed by Richard Braun.  Change-Id: I2b56614b47951595c403a1a8edd3afe11b85679b Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2594 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-02-09  Paul Fertser <fercerpav@gmail.com>

	* : armv7m: add generic trace support (TPIU, ITM, etc.) This provides support for various trace-related subsystems in a
	generic and expandable way.  Change-Id: I3a27fa7b8cfb111753088bb8c3d760dd12d1395f Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2538 Tested-by: jenkins

2014-07-03  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : tcl: Add default hooks for STM32F3x Keep clocks running in low power modes. Stop watchdogs from
	interfering with the debug session. Set up PLL and increase clock at
	reset init.  Change-Id: I984d2018f7d47a1042f1e12894563154fa7b566c Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2196 Tested-by: jenkins Reviewed-by: Uwe
	Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-02-28  Andreas Frber <afaerber@suse.de>

	* : jlink: Add variant "J-Link Lite-XMC4000" Avoids "J-Link hw type unknown 0x10" on the Infineon Relax Lite Kit.  Change-Id: I3091623ead2e84b67ac20d9866307ccbb3f26f66 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/2568 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-02-11  Paul Fertser <fercerpav@gmail.com>

	* : server, target, cortex_m: add deinit_target to the API to free
	resources This should facilitate dynamic target creation and removal.  Currently it helps with getting 0 bytes lost report from Valgrind on
	exit (after talking to a nucleo board). However, 1,223,886 bytes in
	5,268 blocks are still reachable which means the app holds pointers
	to that data on exit. The majority comes from the jtag command
	queue, there're also many blocks from TCL command registration.  Change-Id: I7523234bb90fffd26f7d29cdd7648ddd221d46ab Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2544 Tested-by: jenkins Reviewed-by: Stian
	Skjelstad <stian@nixia.no>

2015-02-11  Paul Fertser <fercerpav@gmail.com>

	* : hla/hla_interface: call HLA layout API close() on quit This bug was exposed by Valgrind.  Change-Id: I2e2bc036b49ca3ff22f78f765ee4537763350096 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2543 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-02-11  Paul Fertser <fercerpav@gmail.com>

	* : target: fix timer callbacks processing Warning, behaviour change: before this patch if a timer callback
	returned an error, the other handlers in the list were not called.  This patch fixes two different issues with the way timer callbacks
	are called: 1. The function is not designed to be reentrant but a nested call is
	possible via: target_handle timer event -> poll -> target events
	before/after reexaminantion -> script_command_run ->
	target_call_timer_callbacks_now . This patch makes function a no-op
	when called recursively; 2. The current code can deal with the case when calling a handler
	leads to its removal but not when it leads to removal of the next
	callback in the list. This patch defers actual removal to
	consolidate it with the calling loop.  These bugs were exposed by Valgrind.  Change-Id: Ia628a744634f5d2911eb329747e826cb9772e789 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2541 Tested-by: jenkins Reviewed-by: Stian
	Skjelstad <stian@nixia.no> Reviewed-by: Andreas Färber
	<afaerber@suse.de> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2015-02-15  Paul Fertser <fercerpav@gmail.com>

	* : stlink: avoid null pointer dereference in stlink_usb_close() Otherwise it happens if stlink can not be opened on start.  Change-Id: I7088f10e61508dae230eccfe576a51498c92f5b8 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2550 Tested-by: jenkins Reviewed-by:
	Andreas Färber <afaerber@suse.de> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk> Reviewed-by: Stian Skjelstad <stian@nixia.no>

2015-01-29  Paul Fertser <fercerpav@gmail.com>

	* : armv7m: do not access FPU registers when not present This is runtime and valgrind tested with l0, l1 and f3 hla boards.  Change-Id: I49b0b042253d5f3bf216997f0203583db319fe23 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2516 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-01-31  Paul Fertser <fercerpav@gmail.com>

	* : jimtcl: update to 0.76 release version It makes sense to use the latest released version to ensure
	compatibility.  Change-Id: I0957f927d825fa6fb6a1594ca17bcca46ee6c1a6 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2522 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-02-26  Paul Fertser <fercerpav@gmail.com>

	* : target/cortex_a: remove dead assignment Found by clang static checker.  Change-Id: I77b0dc18188328fdb28d07b9e5c52e06182d9e2b Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2561 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-02-26  Paul Fertser <fercerpav@gmail.com>

	* : flash/nor/sim3x: remove dead assignment Found by clang static code checker.  Change-Id: Ic1370f8d7a48f08da6514afec5aacde38af7dfb6 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2559 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-12-19  Karl Palsson <karlp@remake.is>

	* : contrib: itmdump: fix incorrect format printf Change-Id: I29100e4b284e031613586a66daa74987d86ac9e1 Signed-off-by:
	Karl Palsson <karlp@tweak.net.au> Signed-off-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2449
	Tested-by: jenkins Reviewed-by: Uwe Bonnes
	<bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-by: Stian
	Skjelstad <stian@nixia.no> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-10-03  Marian Cingel <cingel.marian@gmail.com>

	* : rtos: Freescale MQX rtos support ARMv7E-M (CortexM4) architecture - fix position offset of r2,r3 registers on exception stack - switch 'calloc' arguments - remove prototypes of internal function and typedefs - add NULL check for alloc functions - remove last line of license "Franklin Street, Fifth Floor"   because of 'checkpatch' validation - environment: jlink + twrk60n512 Change-Id: I70840ded15b17dd945ca190ce31e2775078da2d9 Signed-off-by:
	Marian Cingel <cingel.marian@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2353 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-01-29  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : stm32l1.cfg: Add ID Code of Cat.2 devices.  Change-Id: I4eb5020858c1896e294d633213f3df3fa45b6250 Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/2517 Reviewed-by: Paul Fertser
	<fercerpav@gmail.com> Tested-by: jenkins

2015-02-24  Nemui Trinomius <nemuisan_kawausogasuki@live.jp>

	* : lpc2000: Add LPC407x/8x flash size auto detection This patch adds auto flash size detection for LPC407x/8x series.  Tested on below listed chips.  LPC4088 LPC1788(regression test) Change-Id: I82f62678a04eac9b84658bd6d1cfdf45be64c931 Signed-off-by:
	Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on:
	http://openocd.zylin.com/2555 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-by: Jens Bauer <jens@gpio.dk>

2015-01-05  Mateusz Manowiecki <segmentation@fault.pl>

	* : Added system signal handling to Linux version (with http://www.cons.org/cracauer/sigint.html in mind) Change-Id: I15f559bc1122a408c3fb9338ba55c16fab3187e1 Signed-off-by:
	Mateusz Manowiecki <segmentation@fault.pl> Reviewed-on:
	http://openocd.zylin.com/2443 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2014-09-25  Arne Wichmann <arnew@rasentrimmer.org>

	* : target & board: AT91SAM7A2 and Olimex SAM7-LA2 Initial Support for AT91SAM7A2 on Olimex SAM7-LA2 board.  The board
	seems not to be able to reset into halted mode, as srst is connected
	to NRESET of the cpu (configured srst_pulls_trst).  JTAG RCLK is
	connected to CLK.  Tested with
	interface/ftdi/olimex-arm-usb-ocd-h.cfg.  Change-Id: I2bdd67e3683e45f1119c5850bad294aa107891d8 Signed-off-by:
	Arne Wichmann <arne.wichmann@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2318 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-01-28  Theodore A. Roth <troth@openavr.org>

	* : nrf51: Update known devices table.  Added new entries to the nrf51_known_devices_table array. New
	entries are documented in the "nRF51 Series Compatability Matrix
	V1.0" found on the Nordic Semi web site. Reordered entries to match
	the order found in the document.  Also added an entry for an undocumented hwid discovered while
	flashing the PCA10031 and PCA10028 dev boards.  Change-Id: Icca7da103d437dc28e651f27ab937fe953b9aac9 Signed-off-by:
	Theodore A. Roth <troth@openavr.org> Reviewed-on:
	http://openocd.zylin.com/2514 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-01-16  Paul Fertser <fercerpav@gmail.com>

	* : cfg: add board and target configs for TI SimpleLink Wi-Fi CC3200
	LaunchPad Change-Id: I4396ee737c1dad380aa23894bbd1faf75f26d072 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2465 Tested-by: jenkins

2015-01-19  Oleksij Rempel <linux@rempel-privat.de>

	* : tcl/target|board: add configs for Alphascale asm9260t This adds configs for Alphascale asm9260t ARM based SoC and
	Evaluation Kit based on this chip.  Change-Id: Id8d3a1ef204e3ae84540c2693e3d62650ba82f73 Signed-off-by:
	Oleksij Rempel <linux@rempel-privat.de> Reviewed-on:
	http://openocd.zylin.com/2515 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-02-12  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : cfg: Fix Kinetis kwikstik/kx config The flash definition belongs in the target cfg. Add some working
	area and suitable reset_config.  Make kx.cfg more similar to klx.cfg.  Disable rclk as it is dead slow and a fixed 1MHz clock seems to
	work.  Change-Id: I8328f179c3a33be64403da93616abb48651bdfe6 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2227 Tested-by: jenkins Reviewed-by: Tomas
	Vanek <vanekt@fbl.cz> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2014-12-11  Jean-Christian de Rivaz <jc@eclis.ch>

	* : Add SWD protocol support to bitbang This is based on the initial work by Paul Fertser with addition of
	the switch sequences and new ACK handling.  In case of WAIT
	response, the sticky bits are cleared and the last operation is
	repeated. The ACK handling is based on the interpretation of the 8
	February 2006 ARM Debug Interface v5 Architecture Specification Change-Id: Id50855b1ffff310177ccf9883dc9eb0d1b4458c8 Signed-off-by:
	Jean-Christian de Rivaz <jc@eclis.ch> Reviewed-on:
	http://openocd.zylin.com/2437 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2015-02-13  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* :  cortex_m: Add Cortex-M0 identification to ROM-table display.  Change-Id: Id7715a83ba9793844475629aaffd10a81ce586b6 Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/2549 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-by: Stian Skjelstad
	<stian@nixia.no>

2015-01-27  Paul Fertser <fercerpav@gmail.com>

	* : doc: stellaris driver supports Tiva C too Change-Id: I3b77bf0617c0bbba85cfd678adece57aa7d03e32 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2509 Tested-by: jenkins

2015-01-27  Paul Fertser <fercerpav@gmail.com>

	* : README, doc: add mrvlqspi flash driver information Change-Id: I7a270cdaf3d9119aa75285a8d1e063c2fe2a31b7 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2510 Tested-by: jenkins

2014-08-22  Andrej Kazmin <funnyfish@funnyfish.botik.ru>

	* : flash/nor/at91samd: add small delay before checking nvm status OpenOCD's SWD subsystem doesn't currently have a consistent WAIT
	handling (i.e. it doesn't ever retry, just returns an error), so
	right after a row write a small delay is needed as AHB access is
	stalled during the flashing operation.  The issue was exposed with a samd20 using ftdi SWD transport.  Change-Id: I07d99d3a96845cc689c3904a41f4d41344f200aa Signed-off-by:
	Andrej Kazmin <funnyfish@funnyfish.botik.ru> Signed-off-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2268 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2015-01-27  Paul Fertser <fercerpav@gmail.com>

	* : server: shutdown command should lead to exit without evaluating
	the rest Currently openocd -c "echo a1; shutdown; echo a2" outputs both "a1" and "a2" and only then shuts down. This patch
	fixes it by making shutdown command throw an exception, so unless
	it's caught the shutdown will behave as expected.  Change-Id: I764268b3a9046ff3e9717d04095ea0673f1d755a Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2511 Tested-by: jenkins Reviewed-by: Uwe
	Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-01-18  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : xscale: Use the correct method to access registers Change-Id: I900a0787812cb24d1f74ca50eb6bb4f85375a353 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2478 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-01-18  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : cortex_m: Use the correct method to access registers Convert the DWT register store to use a byte array and fix the byte
	order bug uncovered by that. Also fix an incorrect access of the PC
	value.  Change-Id: Idb5acab71bdf5a96895c358324b05c335e4d32ca Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2476 Tested-by: jenkins Reviewed-by: Uwe
	Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2014-02-26  Antony Pavlov <antonynpavlov@gmail.com>

	* : mips32: add gdb target description support This commit is inspired by     commit 1255b18fc650193094666ba8afd2018089cc9794     Author: Spencer Oliver <spen@spen-soft.co.uk>     Date:   Fri Sep 13 09:44:36 2013 +0100         armv7m: add gdb target description support Change-Id: I75c3971fd0599d34ed49fb73975378b57f2a4af0 Signed-off-by:
	Antony Pavlov <antonynpavlov@gmail.com> Signed-off-by: Salvador
	Arroyo <sarroyofdez@yahoo.es> CC: Spencer Oliver
	<spen@spen-soft.co.uk> CC: Oleksij Rempel <linux@rempel-privat.de>
	CC: Paul Fertser <fercerpav@gmail.com> CC: Gregory Fong
	<gregory.0xf0@gmail.com> Reviewed-on: http://openocd.zylin.com/1972
	Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins

2015-02-09  Anton Kuzmin <anton.kuzmin@cs.fau.de>

	* : tcl/interface/ftdi: correct LED config for BusBlaster KT-Link Configure the LED to be off by default, blink on activity.  Change-Id: I8515ee66c49bddf866268b85811be15c2dbc086c Signed-off-by:
	Anton Kuzmin <anton.kuzmin@cs.fau.de> Signed-off-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2539
	Tested-by: jenkins

2014-06-27  Angus Gratton <gus@projectgus.com>

	* : nrf51 - Add async loader. Performance on nrf51822QAA/stlink-v2
	from ~3.5KiB/s to ~19.5KiB/s.  Change-Id: Ib0bf41a0cec85f0bd5728551f8ad7f6255e4ea04 Signed-off-by:
	Angus Gratton <gus@projectgus.com> [spamjunkeater@gmail.com: Cleanup
	buffer allocation, detect -1 for unknown pages] Signed-off-by: Erdem
	U. Altunyurt <spamjunkeater@gmail.com> Signed-off-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2204
	Tested-by: jenkins Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2015-01-31  Joerg Fischer <turboj@gmx.de>

	* : J-Link serial number config option Add serial option to jlink config commands, handy when there is more
	than one adapter connected.  To select adapter 0123456 for OpenOCD, use jlink serial 0123456 Change-Id: Ib29ce3f0c4975e1169211721a4531bf4db61f1ee Signed-off-by:
	Joerg Fischer <turboj@gmx.de> Reviewed-on:
	http://openocd.zylin.com/2521 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-01-27  Paul Fertser <fercerpav@gmail.com>

	* : README: mention "transport select" in quickstart section Change-Id: I027635c3c8632efcf58cf979b9cb2f99e9e7f046 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2512 Tested-by: jenkins Reviewed-by: Uwe
	Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-02-04  Paul Fertser <fercerpav@gmail.com>

	* : doc: document the OCL (on chip flash loader) driver Change-Id: I8afe870c7a16b04473f4822c2df9a7607f0480e7 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2529 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-01-30  Oleksij Rempel <linux@rempel-privat.de>

	* : tcl/target|board: add config Atheros ar9331 Add configs for Atheros ar9331 MIPS based WiSoC and board based on
	this chip: TP-LINK TL-MR3020 Change-Id: I9e99719bce4bbb28311f6e9cddb32288db6e7b91 Signed-off-by:
	Oleksij Rempel <linux@rempel-privat.de> Reviewed-on:
	http://openocd.zylin.com/2519 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2014-12-06  Pawel Si <stawel+openocd@gmail.com>

	* : mini51: support for Nuvoton NuMicro M051 series flash memory adds flash support for Nuvoton M052, M054, M058, M0516
	microcontrollers into the mini51 driver, patch also adds support for
	programing LDROM, flash data and flash config.  I've tested it on a M0516LBN microcontroller using an ST-LINK/V2: 1. removing security lock:    openocd -f interface/stlink-v2.cfg  -f target/m051.cfg -c "init ;
	   halt ; mini51 chip_erase; exit" 2. flashing:    openocd -f interface/stlink-v2.cfg  -f target/m051.cfg -c
	   "program file.hex" Change-Id: I918bfbb42461279c216fb9c22272d77501a2f202 Signed-off-by:
	Pawel Si <stawel+openocd@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2426 Tested-by: jenkins Reviewed-by: Nemui
	Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2015-01-17  Ed Beroset <beroset@ieee.org>

	* : em357: added target files for em357 and em358 This patch adds support for Silicon Labs (formerly Ember) EM357 and
	EM358 chips and derivatives.  Change-Id: Ie63aed95a2f4ef1a6b955e301a51b4de1b3a5462 Signed-off-by:
	Ed Beroset <beroset@ieee.org> Reviewed-on:
	http://openocd.zylin.com/2470 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2014-01-12  Heinz Schweiger <openocd@htl-steyr.ac.at>

	* : cfg: TI Tiva C dk-tm4c129x Evaluation Kits New Texas Instruments Tiva C Series Boards
	http://www.ti.com/tool/dk-tm4c129x Change-Id: I44f96982e91786b977b3d29e0f4c7053d584a703 Signed-off-by:
	Heinz Schweiger <openocd@htl-steyr.ac.at> Reviewed-on:
	http://openocd.zylin.com/1867 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2014-09-08  Tomas Vanek <vanekt@fbl.cz>

	* : psoc4: support for Cypress PSoC 41xx/42xx family New NOR flash driver was derived from stm32lx.  Procedure
	ocd_process_reset_inner is overriden in psoc4.cfg to handle reset
	halt and system ROM peculiarities.  Change-Id: Ib835324412d106ad749e1351a8e18e6be34ca500 Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/2282 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-01-24  Paul Fertser <fercerpav@gmail.com>

	* : flash/nor/stm32lx: use 0 base to autodetect second bank location Change-Id: I3c296b3e276fcd4d92e4180fc0d2133eebfcc240 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2503 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-01-23  Paul Fertser <fercerpav@gmail.com>

	* : flash/nor/stm32l: unify waiting for busy flag functions Change-Id: I5e6daff8232bb4807dd13a1951fbf335529661d4 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2491 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-01-20  Paul Fertser <fercerpav@gmail.com>

	* : configure: define WIN32_LEAN_AND_MEAN early to make it effective This macro makes windows builds faster and helps with the old
	"#define interface struct" issue as the word "interface" is part of
	libusb-0.1 API. However, defining it in replacements.h is too late,
	as windows.h gets included by that time from somewhere else.  This solution is provided by Ray Donnelly from the MSYS2 team.  Change-Id: I376a5fb3d106786515d7e1ba44dbd751e4dcdb1b Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2486 Tested-by: jenkins Reviewed-by:
	Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2015-01-23  Paul Fertser <fercerpav@gmail.com>

	* : flash/nor/stm32f2x: add new revisions of STM32F4x parts Change-Id: I7585ccbe12fe079e960ce9e33d9a143672a6a08c Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2493 Tested-by: jenkins Reviewed-by: Rémi
	PRUD'HOMME <prudhomme.remi@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-12-11  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : Add more STM32F3 IDs in target/stm32f3.cfg.  Change-Id: I4c4462aa025639c4d20e6fa23c8845a69e60afc5 Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/2435 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2015-01-15  Paul Fertser <fercerpav@gmail.com>

	* : tcl/target: add lpc8xx.cfg This adds a trivial config for LPC8xx chips based on the already
	existing infrastructure in lpc1xxx.cfg.  Change-Id: I7384df1f3c2e3e8ab767319728db5c4f8149480f Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2464 Tested-by: jenkins Reviewed-by:
	Andreas Färber <afaerber@suse.de> Reviewed-by: Nemui Trinomius
	<nemuisan_kawausogasuki@live.jp>

2015-01-18  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : armv4_5: Continue the change from uint32_t to uint8_t[4] for
	regs Also remove an unrelated no-op cast.  Change-Id: Ibeb6c72e5b0b0347abb568947a05a179661faf2d Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2473 Reviewed-by: Paul Fertser
	<fercerpav@gmail.com> Tested-by: jenkins

2015-01-16  Jens Bauer <jens@gpio.dk>

	* : stm32f2x: Fix byte order bug.  Do not use buf_set_u32 on integers; they're not buffers.  If using
	buf_set_u32 on integers, bytes will be exchanged on Big Endian
	targets.  In this particular case, FLASH_OPTCR was incorrectly
	written, causing it to often contain one of these values:
	0x00aaaae1, 0x00aaffef, 0x00ffabe1 or 0x00abffe1.  This
	write-protected the device before flash-programming, causing this
	command...  flash write_image erase unlock myfile.elf ... to fail,
	complaining about write-protection.  Repeating the above command
	would change the OPTCR register each time.  After applying this
	patch, the OPTCR remains "unchanged".  Change-Id: I73d510fcc2e81a01973ad5c6e1aa22715ebd2743 Signed-off-by:
	Jens Bauer <jens@gpio.dk> Reviewed-on: http://openocd.zylin.com/2466
	Tested-by: jenkins Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2015-01-09  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : jtag: Rewrite TAP verification/auto-probe logic Enable auto-creating additional discovered TAPs even if some TAPs
	are predefined, avoiding initialization failure when it's not
	necessary.  Also, drop the arbitrary limit on the number of predefined TAPs.
	Still, don't auto-create any if there are more than 20 TAPs already,
	to stop a noisy connection from creating unlimited TAPs.  Create auto-probed TAPs with less noise.  Reduce code duplication between verification and auto-probing.  Change-Id: I82a504d92dbcc0060206e71f10c5158256b5f561 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2236 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2015-01-21  Jaakko Kukkohovi <jkukkohovi@gmail.com>

	* : jtag/drivers/cmsis-dap-usb: fix cmsis_dap_serial Previously the serial wasn't actually used in hid_open() call, which
	meant that the first device with matching vid:pid was opened
	irrespective of the actual serial number.  Change-Id: I45216ae5d9e0798e97be693c30e2f03c89b9a02b Signed-off-by:
	Jaakko Kukkohovi <jkukkohovi@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2487 Tested-by: jenkins Reviewed-by: Jörg
	Wunsch <openocd@uriah.heep.sax.de> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2015-01-10  Paul Fertser <fercerpav@gmail.com>

	* : tcl/target/stellaris: Snowflake supports SYSRESETREQ too Change-Id: If4bf472ab8867c54a976bdb5803f7e4f79f350a8 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2461 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Ed Beroset
	<beroset@ieee.org>

2015-01-17  Paul Fertser <fercerpav@gmail.com>

	* : jtag/drivers/stlink: demote the output of available speeds to
	DEBUG Change-Id: If0afb6fb1cb2f39619e4e614573065c145255c3e Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2469 Reviewed-by: Jens Bauer <jens@gpio.dk>
	Tested-by: jenkins Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2015-01-09  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : stm32f07/9: Both devices have 256 kByte Flash Maximum.  See RM0091, Rev.7. page 56.  Change-Id: I9a98094d49739686f93e26a5112eb0a2a8a7c883 Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/2458 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-01-09  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : stm32f09x: Print info in get_stm32x_info.  Change-Id: I5f9b765fe04906e124e2c95ff6bf7193be9d4ce2 Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/2456 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-01-10  Paul Fertser <fercerpav@gmail.com>

	* : cfg: add srst_nogate to the supported targets, remove from board
	configs It depends on the particular target whether it can work with SRST
	asserted or not, so this belongs to the target config rather than
	the board config.  Also, this allows for simple openocd -f myboard.cfg -c "reset_config connect_assert_srst" command to be used whenever a user feels a need to connect to an
	unresponsive target.  Change-Id: I3d8da9ae47088fc0c75a20bfdd20074be1014de0 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2459 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-11-21  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : stm32f0/nucleo: Use only one configuration for all stm32f0
	nucleo boards.  Change-Id: Ib2ddcd7a92c0d7ad503ef8e953f2bc304241a9f0 Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on:
	http://openocd.zylin.com/2396 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-12-09  Karl Palsson <karlp@remake.is>

	* : target/stm32xx: Endian is not configurable.  So remove it from all the configs, it's misleading, and leads to
	cargo culting of config files.  Change-Id: I2b77e60d5e96f9759c7c9fc91b20e73be2e95d9a Signed-off-by:
	Karl Palsson <karlp@tweak.net.au> Signed-off-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2446
	Tested-by: jenkins Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-12-19  Karl Palsson <karlp@remake.is>

	* : contrib: itmdump: fix multi byte decoding Incorrect byte manipulations.  Change-Id: Id8c3f457b39f4b2b75613076d403359c4972a69d Signed-off-by:
	Karl Palsson <karlp@tweak.net.au> Signed-off-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2448
	Tested-by: jenkins Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-12-15  Andreas Frber <afaerber@suse.de>

	* : tcl/board: Add TI TMDX570LS20SUSB board config It is derived from ti_tmdx570ls31usb.cfg, using a different TAP ID.  Change-Id: I2d911995c76ea4f75a780cc230d61f4959825809 Signed-off-by:
	Andreas Färber <afaerber@suse.de> Reviewed-on:
	http://openocd.zylin.com/2440 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-10-09  Spencer Oliver <spen@spen-soft.co.uk>

	* : hla: add ability to change adapter speed (if supported) As a note we need to cache the requested speed setting, as the hla
	interface may not be ready when the first adapter_khz is called.  Change-Id: I2fa6807d5f0bd3f0365cf178bd10a230c39415a7 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/2334 Tested-by: jenkins

2015-01-07  Paul Fertser <fercerpav@gmail.com>

	* : jtag/hla: output possible idcode candidates in case of mismatch Output a similar message to what we have on low-level JTAG adapters
	to avoid confusing users. Reported on IRC by chickensk.  Change-Id: I96d58410ef715b966e32d79c0aacf38596c5eb3f Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2451 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2015-01-07  Spencer Oliver <spen@spen-soft.co.uk>

	* : docs: update bug tracker URL Change-Id: I6a362020a29ccb9222f7909b5b34e5c35a02ed4b Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/2454 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2014-10-14  Alexander Stein <alexander.stein@systec-electronic.com>

	* : cortex_a: Add support for A7 MPCore A7 MPCore needs unlocking the debug registers same as with A15
	MPCore.  Found out by hacking on the code.  Change-Id: I613cb4fb35007b85b4a9a401577b47768bc1a08b Signed-off-by:
	Alexander Stein <alexander.stein@systec-electronic.com> Reviewed-on:
	http://openocd.zylin.com/2344 Tested-by: jenkins Reviewed-by: Kamal
	Dasu <kamal.dasu@gmail.com> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2014-12-08  Tomas Vanek <vanekt@fbl.cz>

	* : ChibiOS: struct ChibiOS_params_list[] should not be const Procedure ChibiOS_update_memory_signature() sets struct member
	signature.  Change-Id: I45adbd14fa7cda99413fd0b516d45b3fb55e322d Signed-off-by:
	Tomas Vanek <vanekt@fbl.cz> Reviewed-on:
	http://openocd.zylin.com/2427 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-11-20  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: fix kinetis driver typos Change-Id: I0a4557f08507c61cb8ab33b38d2b6b069c344c09 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/2385 Tested-by: jenkins

2014-10-11  Salvador Arroyo <sarroyofdez@yahoo.es>

	* : avoid segfaulting when attempting to set an unavailable type of
	breackpoint For example "bp 0x20000000 8 2" makes openocd segfaulting on a
	stm32f4x Discovery board.  Change-Id: I1ddd46b1fa9ade78db2234ed975ccefb72539331 Signed-off-by:
	Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on:
	http://openocd.zylin.com/2342 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-11-02  Paul Fertser <fercerpav@gmail.com>

	* : swd: handle various failure conditions When communication with target fails for whatever reason, it makes
	sense to do JTAG-to-SWD (in case the target got power-cycled or the
	DAP method was reset anyhow), SWD line reset sequence (part of
	JTAG-to-SWD already) and the mandatory IDCODE read. Schedule that to
	be performed on the next poll.  Fix the return values for ftdi and jlink drivers to be consistent
	with OpenOCD error codes and remove ad-hoc calls to perform DAP
	method switching (as it's now done from the upper layer
	automatically).  Change-Id: Ie18797d4ce7ac43d8249f8f81f1064a2424e02be Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2371 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Mateusz
	Manowiecki <segmentation@fault.pl>

2014-11-14  Spencer Oliver <spen@spen-soft.co.uk>

	* : rtos: free gdb packet allocated memory compile tested only.  Change-Id: I3bc06c212967a3ce44a875f802b554c178537d1d Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/2382 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-07-30  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : jtag: Remove unnecessary global variable Change-Id: I96e5f13b12da2970eafc5fca24b7952d427eeca9 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2235 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-11-21  Karl Palsson <karlp@tweak.net.au>

	* : stm32l: split l0/l1 support no jtag, different HSI settings L0 is cortex m0+, so different id codes, SWD only, different
	addresses for the clock speedup.  It has no endian options, no
	boundary scan.  Removed all L0 specific portions from L1 files, and renamed files to
	clarify their purpose.  The deprecated stm32lx_stlink.cfg is kept as
	is, as it is only around for backwards compatibility with prior
	releases.  Tested on STM32L053 Discovery and STM32L151 Discovery.  Has _not_ been tested with jtag on L1.  Change-Id: I8eea890d2f92a302d9e9c8a8832d218ee1b6bcfc Signed-off-by:
	Karl Palsson <karlp@tweak.net.au> Signed-off-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2405
	Tested-by: jenkins Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk> Reviewed-by: Juha Niskanen
	<juha.niskanen@haltian.com>

2014-11-18  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : tcl/target/stm32f4: ramp up JTAG speed, HSI is 16MHz there Since all F4 parts have an internal HSI providing 16MHz, it's safe
	to use 2MHz JTAG frequency by default.  Change-Id: I2702d5a1d642d4acd4af2db54c028949132c6900 Signed-off-by:
	Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2383 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-10-30  Grigori Goronzy <greg@chown.ath.cx>

	* : lpc2000: ignore status of part ID IAP command The IAP firmware won't return a proper status with some versions.
	This happens on my CCC r0ket board and others have seen it as well
	[1]. So just ignore the status code and do a (weak) consistency
	check instead.  [1]

	http://www.lpcware.com/content/forum/lpc1343-iap-read-part-identification-commandChange-Id: I0daa779d520a540629677c56857bbc20d6db422d Signed-off-by:
	Grigori Goronzy <greg@chown.ath.cx> Reviewed-on:
	http://openocd.zylin.com/2364 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2014-10-10  Antony Pavlov <antonynpavlov@gmail.com>

	* : or1k: remove address of the Free Software Foundation The FSF address has changed; The FSF site says that address is   Free Software Foundation   51 Franklin Street, Fifth Floor   Boston, MA 02110-1301   USA (see http://www.fsf.org/about/contact/) Instead of updating it each time the address changes, just drop it
	completely treewide.  Change-Id: I27199f7625901f677d8105d1e8876cff00147b71 Signed-off-by:
	Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2340 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-10-07  Antony Pavlov <antonynpavlov@gmail.com>

	* : mips32: fix typos Change-Id: Ibb98fe3da68bf670a5bb83600bb49647db8a4163 Signed-off-by:
	Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2338 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-10-24  Christian Gudrian <christian.gudrian@gmx.de>

	* : Added FPU support for ChibiOS/RT When an enabled FPU is detected we now use an appropriate stacking.  Change-Id: I1b0f43ec22e1c55c4f10e2ffa97d4aaa77bca5ee Signed-off-by:
	Christian Gudrian <christian.gudrian@gmx.de> Reviewed-on:
	http://openocd.zylin.com/2354 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-10-25  Paul Fertser <fercerpav@gmail.com>

	* : rtos: allow symbols to be optional for a particular RTOS Default to non-optional.  Change-Id: Ifc9ddb1ab701a19c3760f95da47da6f7d412ff2e Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2355 Tested-by: jenkins Reviewed-by:
	Christian Gudrian <christian.gudrian@gmx.de> Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2014-10-31  Paul Fertser <fercerpav@gmail.com>

	* : jtag/drivers/jlink: implement register command to fix SWD Some J-Link fw versions require registration to be performed before
	SWD operation is possible. It doesn't harm anyway, vendor's
	utilities do it unconditionally.  Thanks go to Segger for providing the necessary information.  Change-Id: Iabd76c743eca86e2c817a97cb93c969fec3f7ac6 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2331 Tested-by: jenkins

2014-10-27  Anders <anders@openpuma.org>

	* : flash/nor/lpcspifi.c: fix bug that prevented clean reset after
	flash write After SPI flash was written by the assembly language stub, the last
	SPI command was not terminated by raising CS.  This left the SPI
	device in a hung state that prevented the flash from being read by
	the M4 SPIFI controller, even after the M4 was fully reset. To
	access the flash via SPIFI, it was necessary to completely power
	cycle the board.  This fix adds the missing instructions to raise CS and terminate the
	SPI command after the last byte. This allows the M4 to be resumed or
	reset cleanly after flashing. The SPIFI memory is now immediately
	accessable at address 0x1400 0000 after flashing is complete.  Change-Id: I4d5e03bded0fa00c430c2991f182dc18611d5f48 Signed-off-by:
	Anders <anders@openpuma.org> Reviewed-on:
	http://openocd.zylin.com/2359 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-09-20  Nemui Trinomius <nemuisan_kawausogasuki@live.jp>

	* : lpc2000: Added LPC1500 series flash programming support.  This patch adds flash programming support for LPC1547/8/9 and
	LPC1517/8/9.  Tested on LPC1549(LPC1549 LPCXpresso Board with
	CMSIS-DAP firmware).  Change-Id: Ic95b4d62055bb9fdc2ca484696a38ccaf49ad951 Signed-off-by:
	Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on:
	http://openocd.zylin.com/2304 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Grigori G
	<greg@chown.ath.cx>

2014-10-29  Jim Paris <jim@jtan.com>

	* : nrf51: verify that UICR needs erasing before triggering an error
	about it If the UICR is already empty, there's no reason to return an error
	just because it can't be erased again.  This happens, for example,
	when flashing UICR from GDB after a "monitor nrf51 mass_erase".  Change-Id: Ia6d28c43189205fb5a7120b1c7312e45eb32edb7 Signed-off-by:
	Jim Paris <jim@jtan.com> Reviewed-on: http://openocd.zylin.com/2363
	Tested-by: jenkins Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-10-28  Jim Paris <jim@jtan.com>

	* : nrf51: fix UICR region size The UICR region is actually 0x100 bytes in size.  Besides making the
	full region accessible, having the right value is important because
	GDB rounds flash addresses to the nearest multiple of the block size
	when determing which flash blocks to erase.  Change-Id: I416c391cbfc7be41a03a9b9c6e42326c87391f38 Signed-off-by:
	Jim Paris <jim@jtan.com> Reviewed-on: http://openocd.zylin.com/2361
	Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
	Tested-by: jenkins

2014-10-26  Paul Fertser <fercerpav@gmail.com>

	* : tcl/interface/ftdi/swd-resistor-hack: clarify and add schematic
	diagram Change-Id: I8600ee983de85e4225430ae508a50cd938122d89 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2357 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-10-02  Spencer Oliver <spen@spen-soft.co.uk>

	* : cmsis-dap: refactor HID PID/VID check loop In preparation for adding serial number support.  Change-Id: I3c9fb411b79d54a4d2de067039255436ba6708c7 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/2328 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-10-06  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: remove incorrect execute permissions Change-Id: I0ba9dfdf876bc99df4e2d1f1f3bc0c9ccc6c98c2 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/2333

2014-09-24  Rmi PRUD'HOMME <prudhomme.remi@gmail.com>

	* : stm32: Add config file for a new board STM32L052 dsicovery this board use STLink-V2-1, the STM32L1xx use the STLink-V2.  Change-Id: Ie58f45affcb1e9a6fed711b48c3c03b5035ab2b2 Signed-off-by:
	Rémi PRUD'HOMME <prudhomme.remi@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2317 Tested-by: jenkins Reviewed-by: Andrey
	Yurovsky <yurovsky@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-08-21  Paul Fertser <fercerpav@gmail.com>

	* : flash/nor/stellaris: implement protection statuses and
	procedures This should make protection work as expected on all stellaris
	families, including the latest Tiva C Snowflake.  Run-time tested on TM4C123x (Blizzard).  Change-Id: Ia017edb119bec32382b08fc037b5bbc02dd9000c Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2267 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-08-19  Paul Fertser <fercerpav@gmail.com>

	* : flash/nor/stellaris: actually enable protection and unprotection
	with ICDI This is still limited to pre-Snowflake parts and the first 64K of
	flash.  Change-Id: I9ca872ada3d1a87dba6261464b2a72a15eda5ecf Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2264 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-09-10  Paul Fertser <fercerpav@gmail.com>

	* : interface/ftdi/olimex-arm-usb-ocd-h: fix nTRST control
	definition According to my inspection of an Olimex ARM-USB-OCD-H adapter ACBUS0
	is connected directly to an SN74LVC2T45 buffer input B2, and the
	corresponding output A2 is connected directly to the JTAG connector.
	It seems the information in the Olimex flyer is incorrect for the -H
	version and TRST can't be tri-stated, ACBUS2 is unused.  The older ARM-USB-OCD device has SN74AC244 for an output buffer and
	ACBUS2 controls its !2OE, ACBUS0 connected to 2A1 (2Y1 is nTRST), in
	accordance with the information flyer.  Change-Id: I22828b7b959b6f62c3f51367feb8fab9705641e5 Reported-by:
	Tim Sander <tim@krieglstein.org> Signed-off-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2286
	Tested-by: jenkins Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk> Reviewed-by: Tim Sander <tim@krieglstein.org>

2014-10-01  Anders <anders@openpuma.org>

	* : jtag/drivers/libusb1_common: avoid device reset when reselecting
	configuration According to [1], we shouldn't reselect an already active
	configuration to avoid needless device reset. This is known to cause
	issues with e.g. LPC Link2 with JLink firmware.  [1] http://libusb.sourceforge.net/api-1.0/caveats.html#configsel Change-Id: I3568ada77780a521548c450090db7173f8d0b2dd Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Signed-off-by: Anders Oleson
	<anders@openpuma.org> Reviewed-on: http://openocd.zylin.com/2288
	Tested-by: jenkins Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-09-11  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: constify structures Change-Id: I875cfab8dec4ade72ed9c9cd7d52baaca182a1ef Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/2295 Tested-by: jenkins

2014-09-11  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: constify driver data structures Change-Id: Ia5c3de48119f036e1d7a41be62a672a6fb37e59b Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/2293 Tested-by: jenkins

2014-09-11  Spencer Oliver <spen@spen-soft.co.uk>

	* : nuc1x: fix typos Change-Id: Ia67b55ccb2bea71a99daa176def82960f487ca9f Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/2291 Tested-by: jenkins

2014-08-06  Andrey Yurovsky <yurovsky@gmail.com>

	* : at91samd: add erase/secure commands, minor fix Reference code for the SAMD2x disables caching in the NVM controller
	when issuing NVM commands.  Let's do this as well to be consistent
	and safer.  Add a "chip-erase" for the Atmel SAMD targets that issues a complete
	Chip Erase via the Device Service Unit (DSU).  This can be used to
	"unlock" or otherwise unbrick a chip that can't be halted or
	inspected, allowing the user to reflash with new firmware.  Add a "set-security" command which issues an SSB.  Once that's done
	and the device is power-cycled, the flash cannot be written to until
	a "chip-erase" is issued.  The chip-erase cannot be issued by
	openocd at this time because the device will not respond to a
	request for the DAP IDCODE.  Change-Id: I80122f0bbf7e3aedffe052c1e77d69dc2dba25ed Signed-off-by:
	Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2239 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-09-29  Paul Fertser <fercerpav@gmail.com>

	* : doc/openocd.texi: add SWD to the transports supported by jlink Since 67332532194b16b99f0535a41b4179ca5df349b0 jlink adapter driver
	supports SWD in addition to JTAG.  Change-Id: I9376aa02d9281f3e2734d8f127cd42162633d95b Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2324 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-09-21  Jon Burgess <jburgess777@gmail.com>

	* : cortex_m.c: Use two byte breakpoint for 32bit Thumb-2 request When GDB requests a breakpoint on a 32bit Thumb-2 instruction it
	sends a length of 3 which the current code rejects. Using the
	existing two byte breakpoint for this case appears to work fine.  The use of length==3 for this case is mentioned in a few places:
	https://sourceware.org/gdb/onlinedocs/gdb/ARM-Breakpoint-Kinds.html
	http://sourceforge.net/p/openocd/mailman/message/30012280/ Change-Id: I59cd69ba4d1bc9a37b86569738c6bb2a67c3eb7a Signed-off-by:
	Jon Burgess <jburgess777@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2312 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-03-24  Karl Palsson <karlp@tweak.net.au>

	* : tcl/board: add TI Tiva C ek-tm4c1294xl config Change-Id: Iab070fe4c0f03ecc0db035b16dfb64105b0841be Signed-off-by:
	Karl Palsson <karlp@tweak.net.au> Signed-off-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2063
	Tested-by: jenkins

2014-09-08  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : target: Remove "-variant" argument Remove this underutilized feature. Despite the fact that a lot of
	configs specifies a arbitrary "variant", only the xscale target
	actually defines any.  In the case of xscale, the use of -variant is dubious since 1) it's used as a redundant irlen specifier, 2) it carries a comment that it doesn't really need it and 3) only two xscale configs even specify it.  If there's a future target that needs a variant set, a target
	specific option could be added when needed.  Change-Id: I1ba25a946f0d80872cbd96ddcc48f92695c4ae20 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2283 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-04-04  Andrey Smirnov <andrew.smirnov@gmail.com>

	* : flash/nor/tcl.c: Do not double probe banks Previous to this version the code of handle_flash_probe_command
	would probe a bank twice: first time by auto-probe through a call to
	flash_command_get_bank and second time by calling the probe function
	directly. This change adds a flash_command_get_bank_maybe_probe wich
	is a more generic version of the flash_command_get_bank, that would
	allow commands to decide whether auto-probing should be performed or
	not.  Change-Id: If150ca9c169ffe05e8c7eba36338d333360811e3 Signed-off-by:
	Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2093 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-09-04  Mahavir Jain <mjain@marvell.com>

	* : flash/nor: add mrvlqspi flash controller driver This patch adds support for QSPI flash controller driver for
	Marvell's Wireless Microcontroller platform.  For more information
	please refer,

	https://origin-www.marvell.com/microcontrollers/wi-fi-microcontroller-platform/Following things have been tested on 88MC200 (Winbond W25Q80BV flash
	chip): 1. Flash sector level erase 2. Flash chip erase 3. Flash write in normal SPI mode 4. Flash fill (write and verify) in normal SPI mode Change-Id: If4414ae3f77ff170b84e426a35b66c44590c5e06 Signed-off-by:
	Mahavir Jain <mjain@marvell.com> Reviewed-on:
	http://openocd.zylin.com/2280 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-09-18  Austin Phillips <austin_phillips@hotmail.com>

	* : Support hla_serial command for ST-LINK adapters.  The hla_serial command allows for a programming device serial number
	to be specified in addition to USB VID/PID.  This allows for
	multiple ST-LINK/V2 programmers to be attached to a single machine
	and operated using openocd.  Change-Id: I350654bf676eb26ba3a90450acfa55d2a5d2d791 Signed-off-by:
	Austin Phillips <austin_phillips@hotmail.com> Reviewed-on:
	http://openocd.zylin.com/2198 Tested-by: jenkins Reviewed-by: Martin
	Glunz <mg@wunderkis.de> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-09-07  Anders <anders@openpuma.org>

	* : flash: added new Spansion S25FL116K, S25FL132K, and S25FL164K
	devices The new FL1-K family is replacing the FL-K family. The data from all
	three was based on the datasheet. In addition the 8MB S25FL164K was
	tested successfully with OpenOCD on a custom board.  Change-Id: Idafeed86da12a481c0db92cc0de7ba28f50c2252 Signed-off-by:
	Anders <anders@openpuma.org> Reviewed-on:
	http://openocd.zylin.com/2281 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-09-02  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : cortex_m: Check return value from cortex_m_dcc_read.  Caught by clang.  Change-Id: I26d2b845aca431612862ef432b217ca397d9b893 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2279 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-08-20  Paul Fertser <fercerpav@gmail.com>

	* : tcl/board/sheevaplug: add adapter_khz setting This combination is known to work properly with 2MHz JTAG clock.  Change-Id: Ie5ec3d3b415efbb13faee7d34e0c7f862b78350c Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2266 Tested-by: jenkins

2014-02-20  Vanya Sergeev <vsergeev@gmail.com>

	* : cfg: refactor lpc1xxx targets onto one base config Since now auto-detection for flash size works nicely, there's no
	reason to keep numerous configs around.  Change-Id: If0cbc37985abf17ef7c1f7d0688e76500fac228f Signed-off-by:
	Vanya Sergeev <vsergeev@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1960 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2014-08-18  Nemui Trinomius <nemuisan_kawausogasuki@live.jp>

	* : stm32f2x: added STM32F411xx series support.  Added STM32F411xx series to flash driver.  Tested on NUCLEO-F411RE board(STM32F411RET6).  Change-Id: Id7d1f2858c09815a013e0590e65ad193fb039157 Signed-off-by:
	Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on:
	http://openocd.zylin.com/2258 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2014-08-19  Paul Fertser <fercerpav@gmail.com>

	* : flash/nor/stellaris: add all Tiva C parts IDs Luckily, TI's website has predictable URLs for the datasheets, so it
	was trivial to download all the pdfs corresponding to the currently
	available 71 TivaC devices. Then they were processed with pdftotext
	and parsed by this script: BEGIN { capture = -1 } /^Device Identification 0 \(DID0\)$/ { state
	= "waitingclass0" } /^Device Identification 1 \(DID1\)$/ { state =
	"waitingpartno0" } /^CLASS$/ { if (state == "waitingclass0") state =
	    "waitingclass" else if (state == "waitingclass") capture = 4 }
	/^PARTNO$/ { if (state == "waitingpartno0") state = "waitingpartno"     else if (state == "waitingpartno") capture = 4 } (FNR == 3) {
	family = $2 } {     if (capture >= 0) { 	if (capture == 0) { 	    if (state == "waitingclass") 		class = $0 	    else if (state == "waitingpartno") 		partno = $0 	} 	capture--     } } END { print "{" class ", " partno ", \"" family "\"}," } Change-Id: I6820c409fe535f08394c203276b5af4406fe8b92 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2262 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-08-24  Paul Fertser <fercerpav@gmail.com>

	* : tcl/interface/ftdi: add kt-link config (with SWD) for DP
	BusBlaster Change-Id: Icbeca8c0c3845c0b777fb2e4c81b17e7b7cc5ff8 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2269 Tested-by: jenkins Reviewed-by: Ben
	Gamari <bgamari@gmail.com> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2014-08-15  Paul Fertser <fercerpav@gmail.com>

	* : tcl/target/imx6: add yet another SJC tapid This is for mx6q TO1.1.  Change-Id: Id6af2ed232fc19be9bf49eb6d2df0004c6668698 Reported-by:
	Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2253 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-08-19  Paul Fertser <fercerpav@gmail.com>

	* : jtag: always configure enabled tap parameter appropriately Commit f701c0cb seems to have introduced a regression for non-JTAG
	transports as the newly created "tap" (DAP actually) ended up being
	disabled, thus resulting in total lack of functionality.  This was exposed by a debug log demonstrating ftdi SWD transport
	connection to mdr32f9q2i, the target wasn't examined on init and
	couldn't be reset.  Change-Id: If53cbe800d4adc177aa3ac3219860e7fa15b3e49 Reported-by:
	Хайруллин Эльдар <eldar.khayrullin@mail.ru>
	Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2261 Tested-by: jenkins Reviewed-by: Angus
	Gratton <gus@projectgus.com> Reviewed-by: Nemui Trinomius
	<nemuisan_kawausogasuki@live.jp> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-07-10  Andrey Yurovsky <yurovsky@gmail.com>

	* : stm32lx: refactor and add support for STM32L0xx This adds initial support for the STM32L0 family, specifically the
	ID code 417 variant.  The 'L0 has 128B rather than 256B pages as
	well as a different number of pages per sector.  It also has several
	key registers and register sets in different locations from the
	STM32L1xx parts.  This change therefore takes the opportunity to reorganize part
	information into a const table (it was previously determined by a
	set of control statements) and abstracts away some of the low-level
	details to make them generic for L1 and L0 parts.  We also include the first bank's size (for dual bank parts) in the
	new device information table (and correct that size for the 0x437
	variant which is 256 rather than 192KB).  The 'L0 parts will not use the built-in loader/helper for Flash
	writing.  Tested on STM32L053 (dicovery board and Nucleo board) and STM32L152
	(discovery board).  Change-Id: I57f7a8ab02caee266de71b31ae82a50d85728a0b Signed-off-by:
	Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2200 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-08-18  Andrey Yurovsky <yurovsky@gmail.com>

	* : flash: samd: add missing ID for SAMD20E18A This was somehow missed in the chip ID table and of course that's
	exactly the one on my board (as such, tested on hardware).  Change-Id: I212d7c729d979e0357f1d4635f40935e25fe6ff3 Signed-off-by:
	Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2260 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-08-08  Spencer Oliver <spen@spen-soft.co.uk>

	* : jlink: add variant "J-Link Lite-ADI" Fitted to various Analog Devices ADuCM36x dev boards.  Change-Id: Ib3691704c0ecd2f8cba1abba284aee695d6bc135 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/2244 Tested-by: jenkins

2014-08-14  Paul Fertser <fercerpav@gmail.com>

	* : flash/nor/stm32f1x: add STM32F302x6/8 IDs, clarify STM32F302xB/C Change-Id: I22afbe30f32b0ea9b59c3de8d15ce14bdc4763cc Reported-by:
	Luis Rodrigues <lfrodrigues@gmail.com> Signed-off-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2249
	Tested-by: jenkins Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-08-15  Paul Fertser <fercerpav@gmail.com>

	* : transport: emit a warning when a user tries to reselect a
	transport Even though changing transport is impossible, reselecting it should
	be harmless.  Change-Id: I6c1c2786134e826f47f848b590e6d712b6fd2206 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2251 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-08-17  Eldar Khayrullin <eldar.khayrullin@mail.ru>

	* : tcl/board/stm32ldiscovery: fix breakage Change-Id: I450ea82c27009be6bad6a7814969d81964ff44d8 Signed-off-by:
	Eldar Khayrullin <eldar.khayrullin@mail.ru> Signed-off-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2255 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-01-22  Oleksij Rempel <linux@rempel-privat.de>

	* : mips_m4k.c: D or I breaks only if they supported.  For example Realtek RTL8186 (Lexra LX5280 core) don't support break-
	and watchpoints.  Change-Id: Ie00102da4bf13a8c42a9ad05910c66884f297cfd Signed-off-by:
	Oleksij Rempel <linux@rempel-privat.de> Reviewed-on:
	http://openocd.zylin.com/1933 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-01-21  Oleksij Rempel <linux@rempel-privat.de>

	* : mips32.c: fix IB and DB bits check for EJTAG v2.0 Change-Id: I4e28dddc1d5d9c2b923ae17beacdd7f73591b1d0 Signed-off-by:
	Oleksij Rempel <linux@rempel-privat.de> Reviewed-on:
	http://openocd.zylin.com/1931 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-08-14  Oleksij Rempel <linux@rempel-privat.de>

	* : mips_ejtag.c|h: use version specific IMPs and make version specific debug log Change-Id: I17f7ff757cfa1264a1dadbfe20c5e21de62ef87a Signed-off-by:
	Oleksij Rempel <linux@rempel-privat.de> Reviewed-on:
	http://openocd.zylin.com/1929 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-04-16  Andrey Smirnov <andrew.smirnov@gmail.com>

	* : tcl/board: Add board configuration for nRF51822-mKIT Add board configuration for Nordic's nRF51822-mKIT devkit, available
	here: http://mbed.org/platforms/Nordic-nRF51822/ Change-Id: Ib9329307147b1e7be061a5060b4eec8256fe2bd4 Signed-off-by:
	Andrey Smirnov <andrew.smirnov@gmail.com> [gus@projectgus.com: Minor
	tweaks, model number] Signed-off-by: Angus Gratton
	<gus@projectgus.com> Reviewed-on: http://openocd.zylin.com/2116
	Tested-by: jenkins Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2014-07-01  Angus Gratton <gus@projectgus.com>

	* : nRF51822: Add workaround for PAN-16 where not all RAM blocks
	reliably enabled on reset According to Nordic Semiconductor Product Anomaly Notice (document
	NRF51822-PAN), item 16, some revisions of nRF51822 sometimes reset
	without all RAM blocks enabled. This was noted on NRF51822-QFAA rev
	CA/C0, only 8KiB of memory was accessible.  This patch turns on all RAM following a debugger induced reset
	(matches specified behaviour.) Change-Id: I4f8be4ec3d1271da7fe5bc9a084fdcb2968535bb Signed-off-by:
	Angus Gratton <gus@projectgus.com> Reviewed-on:
	http://openocd.zylin.com/2202 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2013-09-28  Paul Fertser <fercerpav@gmail.com>

	* : Allow transports to override the selected target (hla configs
	unification) This should allow to share common configs for both regular access
	and high-level adapters.  Use the newly-added functionality in stlink and icdi drivers, amend
	the configs accordingly.  Runtime-tested with a TI tm4c123g board.  Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> [gus@projectgus.com:
	context-specific deprecation warnings] Signed-off-by: Angus Gratton
	<gus@projectgus.com> [andrew.smirnov@gmail.com: additional nrf51.cfg
	mods] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
	Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
	Reviewed-on: http://openocd.zylin.com/1664 Tested-by: jenkins
	Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-08-02  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : interface/ftdi: Mark flyswatter.cfg as tested - Flyswatter + Proxmark3 (Atmel AT91SAM7S256) - works - Flyswatter + Tiva Launchpad (EK-TM4C123GXL) - works Change-Id: I615e0ff9262be6ae1064fb2de8e6e810775e7db4 Tested-by:
	Ondrej Mikle <ondrej.mikle@nic.cz> Signed-off-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2237 Tested-by: jenkins

2014-07-19  Paul Fertser <fercerpav@gmail.com>

	* : drivers/jlink: fix SWD speed config, and set it before sending
	anything During the initialisation a driver might need to communicate with
	the target (e.g. sending jtag2swd sequence), so when doing so it
	should honour the user-specified speed.  Change-Id: If84fea6057fda9edcf2c0a653edfbab2500e3cdd
	[andrew.smirnov@gmail.com: fix khz/hz confusion] Signed-off-by:
	Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2224 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-07-28  Paul Fertser <fercerpav@gmail.com>

	* : tcl/board: fix all the remaining boards that were sourcing
	ft2232 configs This was reported in
	https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=751372 .  Change-Id: I258f3d40593ff2966ce3ca61c13a23699d1b162f Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2230 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-05-11  Paul Fertser <fercerpav@gmail.com>

	* : Provide od+sed replacement for the bin2char helper Using custom build-time tools is always more problematic, especially
	for cross-compiling.  This alternative implementation assumes "od" (IEEE Std 1003.1-2001)
	and sed are available which should be the case for any reasonably
	modern system.  Change-Id: I0208f475648c78e7dca127ff4bab60d314b2bf53 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2139 Tested-by: jenkins Reviewed-by: Fatih
	Aşıcı <fatih.asici@gmail.com> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2014-06-23  Paul Fertser <fercerpav@gmail.com>

	* : tcl/target/stm32l: restore slow clock on reset Change-Id: I63eafaa38b188fe50c13ab966be44a3eaa2006b0 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2188 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-06-24  Masaki Muranaka <monaka@monami-ya.com>

	* : drivers/cmsis_dap_usb: Return with ERROR_FAIL if no CMSIS-DAP
	device is found.  Even if it does not return, the initialization will be failed.  But
	it is better to show why the error is caused.  Change-Id: I399c7c94a7156be22723a9715e594061bb414a7e Signed-off-by:
	Masaki Muranaka <monaka@monami-ya.com> Reviewed-on:
	http://openocd.zylin.com/2189 Tested-by: jenkins Reviewed-by: Andrey
	Yurovsky <yurovsky@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-07-03  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : cfg: Rename leftover cortex_a8 -> cortex_a Change-Id: Id11d89ae2fb78854da4284afb7f14d8a892a2e49 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2197 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-08-29  Kamal Dasu <kdasu.kdev@gmail.com>

	* : cortex_a: target implementation renames cortex_a8 to cortex_a A previous commit changes the target name used by tcl scripts.
	commit d9ba56c295f057e716519a798bf9cdb4898c24f4 target: rename
	cortex_a8 to cortex_a The current change renames target functions and definitions in the
	implementation from cortex_a8 to cortex_a.  This prepares the
	implementation to support Cortex-A8, A9, A15-MPCore in one place.  Change-Id: I73b5a38a92c12ba5bd3b806fbbb664817575a6d7 Signed-off-by:
	Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1599 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-02-16  Fatih Aşıcı <fatih.asici@gmail.com>

	* : vsllink: Add SWD support Tested with stm32f1x, stm32f4x and kl25 targets using SWD transport.  Change-Id: I118d07371b53f402ea9ac73f874460a309c05100 Signed-off-by:
	Fatih Aşıcı <fatih.asici@gmail.com> Signed-off-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1947 Tested-by: jenkins

2014-06-25  Paul Fertser <fercerpav@gmail.com>

	* : drivers/cmsis_dap_usb: restructure init sequence a bit This fixes the issue of improper initialisation sequence and in
	particular makes "cmsis_dap_vid_pid" config specification
	functional.  Not really elegant but it's in line with the ftdi driver and so can
	be reworked in a uniform way later when the internal API is changed.  Change-Id: Ief9fc64ad0ac24e1c66727153f383e4f30a830c7 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2192 Reviewed-by: Andrey Yurovsky
	<yurovsky@gmail.com> Tested-by: jenkins Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-02-20  Kamal Dasu <kdasu@broadcom.com>

	* : Openocd: svf: Add ability to ignore svf_check_tdo errors Added Openocd commandline argument to ignore_error when the read
	back TDO does not match to expected value specified with TDO after
	masking with what is specified in MASK. This allows to continue to
	play entire SVF file ignoring errors.  Error logs clearly show the
	failure reason and prints read back TDO value.  Change-Id: I324f476fc16a003b35e6f2c5b63976431f49d54a Signed-off-by:
	Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2129 Tested-by: jenkins Reviewed-by: Franck
	Jullien <franck.jullien@gmail.com> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2014-06-22  Paul Fertser <fercerpav@gmail.com>

	* : jtag/drivers/ftdi: do not touch unavailable reset signals If the current reset_config doesn't specify availability of nTRST or
	nSRST, just leave them alone, do not try to deassert them ever
	(asserting would be prevented by the upper layer).  Change-Id: I90123c666e05a1c26f1e164625e82d766a3e3744 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2186 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-06-20  Paul Fertser <fercerpav@gmail.com>

	* : tcl/interface/ftdi: add SWD configs for kt-link, olimex, rowley
	and resistor hack Resistor hack is runtime-tested, other configs are based on
	schematics.  Change-Id: I8daffa0434cd41d142fbec7c230a302284f7aa31 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2184 Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2014-06-20  Paul Fertser <fercerpav@gmail.com>

	* : jtag/drivers/ftdi: declare standard JTAG signals on SWD init Unfortunately, this means they're available for config files only
	after selecting swd transport.  Change-Id: Ia2afc1f3bfdba8d81efbb8ab964b174c0f7e2811 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2182 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-06-19  Paul Fertser <fercerpav@gmail.com>

	* : Auto-select JTAG transport when appropriate I looked through all the target configs after stripping comments and
	such from them with sed to see what jtag-specific commands can
	appear first, and it looks like all the meaningful combinations
	should be covered.  Change-Id: I8d543407b7f4ac8aca7354ecd50e841c8a04d5f3 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2179 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-05-09  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : cfg: Add SWD support to JTAG-lock-pick Tiny 2 Change-Id: I61eac507fa6861b7daf603ebca58e8bf3cc699c1 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2136 Tested-by: jenkins Reviewed-by: Jens
	Bauer <jens@gpio.dk> Reviewed-by: Paul Fertser <fercerpav@gmail.com>

2014-05-10  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : transport: Constify the transports vector Change-Id: I0c874b5d4c97cf781d83bd381d701f770e069f72 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2135 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2014-03-02  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : adi_v5: Make sure all bit masks are unsigned and wide enough.  Also align them with spaces instead of tabs.  Change-Id: I1c01412a3ea77b29e8e133f5c92d05ed79d7c0f3 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2133 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2014-05-09  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : swd: Fix park bit polarity according to ADIv5.1 Supplement Change-Id: I27293defd3f3c3bf37c9662f88689e85ba593d86 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2131 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2014-06-18  Andrey Smirnov <andrew.smirnov@gmail.com>

	* : adi_v5_cmsis_dap.c: Simplify debugging output Name of the function is already a part of the LOG_DEBUG macro, so
	there's no need to include it in the string itself.  Change-Id: I18c3d5b746e9106d55104e490ccf5bc5e85cc380 Signed-off-by:
	Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2138 Tested-by: jenkins

2014-06-18  Andrey Smirnov <andrew.smirnov@gmail.com>

	* : adi_v5_cmisis_dap: Separate ABORT from clearing sticky errors We don't need to do full blown AP ABORT in case of CMSIS-DAP errors,
	and the code that was in place was not doing that(issuing AP ABORT)
	anyway.  Change-Id: Ide83b1f8875d725da6cb0d53aae8229f8c6316b3 Signed-off-by:
	Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2112 Tested-by: jenkins Reviewed-by: Andrey
	Yurovsky <yurovsky@gmail.com>

2014-03-01  Paul Fertser <fercerpav@gmail.com>

	* : tcl: introduce using_(jtag|swd|hla) helpers and use them in
	reset handler Barely tested with plain SWD transport.  Change-Id: I48b59136bf4294ffed737dba01f1b30ef83aa86b Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2003 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-05-10  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : adi_v5_swd: Separate sticky error clearing from AP abort Swd_queue_ap_abort should set DAPABORT, not only clear sticky
	errors.  However, DAPABORT should not be set as soon as there is a
	single FAULT/WAIT response. It's an "emergency only" operations for
	use only when the AP have stalled the transfer for a long time. So
	these need to be separate functions.  Change-Id: I37618447884faad54d846c2b07fa668ad505919d Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1956 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2014-02-16  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : adi_v5_swd: Read RDBUFF once after a sequence of AP reads Increases performance by a factor of two for long reads.  Change-Id: I81a7a83835058560c6a53a43c3cc991100f01766 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1954 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2014-02-14  Fatih Aşıcı <fatih.asici@gmail.com>

	* : adi_v5_swd: Improve SWD support Fix bug in parity calculation macro.  Cache and update the selected DP bank when necessary.  Add aborts when the Ack code signals a failure (we should really
	only clear the sticky bits, but this will do for now).  Change-Id: I38a4da136ba1d9e989b33c1875a80c0b1b2be874 Signed-off-by:
	Fatih Aşıcı <fatih.asici@gmail.com> Signed-off-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1950 Tested-by: jenkins

2014-06-12  Paul Fertser <fercerpav@gmail.com>

	* : jtag/drivers/jlink: better diagnostics for RCLK problems The JLink protocol description doesn't really specify it for
	JTAG-level commands but the real life evidence is that 0x01 error
	code means "Adaptive clocking timeout" as it does for e.g.
	WRITE_MEM_ARM79.  Change-Id: I4e3b568742814271919f92d202713968c8fcccfb Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2169 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-06-04  Paul Fertser <fercerpav@gmail.com>

	* : tcl/target/fm3.cfg: use a CHIPNAME known by the flash driver fm3 flash driver needs to know which chip variant is used.  This fixes "unknown fm3 variant: mb9bf500.cpu" error if the config
	is used as is.  Change-Id: I500fcfb413f23ee246678cec5bd19d14139a28e2 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2160 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-05-30  Franck Jullien <franck.jullien@gmail.com>

	* : openrisc: add support for JTAG Serial Port Change-Id: I623a8c74bcca2edb5f996b69c02d73a6f67b7d34 Signed-off-by:
	Franck Jullien <franck.jullien@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2162 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-06-04  Paul Fertser <fercerpav@gmail.com>

	* : flash/nor/tcl.c: fix formatting in "rejected" error message The error message (with the usage field unpopulated) looks like
	this, obviously missing at least a space before Usage: Error: 'fm3' driver rejected flash bank at 0x00000000Usage (null) Change-Id: I2a625676e784d02942823f972a201f7f4f810c68 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2161 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-03-21  Tom Rini <trini@ti.com>

	* : tcl/target/am335x.cfg: Drop gdb-attach stanza This isn't needed nor a recommended practice now, was a simple
	copy/paste from amdm37x.cfg anyhow.  Change-Id: I064226dc859d7563cfad945b577279fc37448645 Signed-off-by:
	Tom Rini <trini@ti.com> Reviewed-on: http://openocd.zylin.com/2068
	Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>

2014-05-06  Seth LaForge <sethml@google.com>

	* : cortex_a: fix lockup when writing to high address On a processor with caches, when you write data to memory OpenOCD
	invalidates the cache lines affected. If you write to an address
	within 64 bytes of UINT32_MAX, then the for loop control variable
	wrapped around resulting in an infinite loop. Change control
	variable to be an offset from the address involved. We should never
	be asked to write 2^32 bytes, so wraparound should not be a problem.  Change-Id: Ibfe654113eff71684862ff651e7a1cd05ccc6760 Signed-off-by:
	Seth LaForge <sethml@google.com> Reviewed-on:
	http://openocd.zylin.com/2126 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-06-16  Nemui Trinomius <nemuisan_kawausogasuki@live.jp>

	* : stm32f1x: add STM32F33x support.  Added STM32F33x series to flash driver.  Tested on NUCLEO-F334R8
	board(STM32F334R8T6).  Change-Id: I2fe70d40eb7613a7a3cfa63d25fa83f7bc055fb4 Signed-off-by:
	Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on:
	http://openocd.zylin.com/2174 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-05-29  Marco Cruz <marco.caratuva@gmail.com>

	* : tcl/board: add Atmel SAM4E-EK Change-Id: I07d7e0528ed4e88b070ba4e7598a193ec8e9e37d Signed-off-by:
	Marco Cruz <marco.caratuva@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2158 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-by: Alexandre Pereira da
	Silva <aletes.xgr@gmail.com> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2014-05-17  Paul Fertser <fercerpav@gmail.com>

	* : README.OSX: mention Gentoo Prefix and clarify other options Change-Id: I431bfb9acf7dd6ad61b9e8f5c20568be22e9f39d Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2146 Tested-by: jenkins Reviewed-by:
	Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-04-23  Paul Fertser <fercerpav@gmail.com>

	* : tcl/target/kl25.cfg: add maximum speed specification Maximum frequency wasn't tested on hardware but the docs seem to be
	quite explicit and do not mention any restrictions for that.  Change-Id: Idcf58df5358d06525e683f07c76eedad8f0b292d Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2120 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-05-29  Paul Fertser <fercerpav@gmail.com>

	* : jtag/drivers/osbdm: downgrade init message severity, fix wording Change-Id: Iacf874b0fe9fbf840e82e6b63f1c97031f4720de Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2156 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-03-29  Cosmin Gorgovan <cosmin@linux-geek.org>

	* : Flash/LPC2000: Add support for LPC11(x)xx, LPC13xx LPC11(x)xx and LPC13xx devices are mostly compatible with the
	lpc1700 variant of the LPC2000 driver, but use a fixed flash sector
	size of 4KB.  Change-Id: I033515f4ff6bc61d3b9babd27096f78c99cea927 Signed-off-by:
	Cosmin Gorgovan <cosmin@linux-geek.org> Reviewed-on:
	http://openocd.zylin.com/2071 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2014-04-06  Alex Ray <a@machinaut.com>

	* : Disable multiprocessor-id read on ARMv7-R cores ARMv7-R cores are largely uniprocessor-configured, and when they are
	multiprocessor-configured the format of the MPIDR register isn't
	compatible with ARMv7-A cores.  Change-Id: I024ec514496fbab5075c6fb34b6acd870e68e1fc Signed-off-by:
	Alex Ray <a@machinaut.com> Reviewed-on:
	http://openocd.zylin.com/2096 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-05-23  Paul Fertser <fercerpav@gmail.com>

	* : jtag/drivers/stlink: allow to reconnect seamlessly after polling
	failure If the communication with the target was failing (either because of
	an intermittent connection or the target was rebooted), this is
	needed to reestablish operational state.  Reported-by: Tim Sander <tim@krieglstein.org> Tested-by: Tim Sander
	<tim@krieglstein.org> Change-Id:
	I91ea2e2b2b5ef8eb27dfe9bae95ef2a919f67e4e Signed-off-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2152 Tested-by: jenkins Reviewed-by: Tim
	Sander <tim@krieglstein.org> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-04-03  Andrey Smirnov <andrew.smirnov@gmail.com>

	* : adi_v5_cmsis_dap: Fix logging order of appearance Move logging for cmsis_dap_queue_ap_read/write to happen after a
	call to cmsis_dap_ap_q_bankselect so that that SWD operation would
	appear in the log in the same sequence they happen on the bus.  Change-Id: Ic046bc753e661da7924b019c9100d6932fb686bf Signed-off-by:
	Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2087 Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Tested-by: jenkins

2014-04-03  Andrey Smirnov <andrew.smirnov@gmail.com>

	* : arm_adi_v5: Add convenience "atomic"" function for DP reads Add convenience "atomic"" function dap_dp_read_atomic_u32() Change-Id: Ic9ebb58959d2f14bbf03be42a26b0fe58ecfeddb Signed-off-by:
	Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2085 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-05-23  Paul Fertser <fercerpav@gmail.com>

	* : flash/nor/stm32f1x: add support for F04x parts Ref. RM0091 Rev.6.  Change-Id: I13bcdb1741edc59712e4fa1849fff38d17709fa7 Reported-by:
	efuentes@irc.freenode.net Signed-off-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2150
	Tested-by: jenkins Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-05-12  Paul Fertser <fercerpav@gmail.com>

	* : target/mips32_pracc: fix C99 format specifiers Warnings exposed by arm-none-eabi build.  Change-Id: Icdaf168d7aaa1a62bdfd41a64e43ef94816d3721 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2140 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-12-19  Aurelien Jacobs <aurel@gnuage.org>

	* : lpcspifi: setup a valid stack pointer before calling ROM code
	using stack The spifi_init_code blob is calling the spifi_init() function from
	the ROM.  This ROM function is making use of the stack. So if the
	stack pointer is invalid, trying to execute this code leads to a
	double fault and the target_run_algorithm() call return with an
	error.  This patch simply ensure that the stack pointer is properly
	setup before calling the spifi_init() ROM function.  Change-Id: I42a2163cfc2c6dfe5ada97ae8eb2bb6d2e283ff7 Signed-off-by:
	Aurelien Jacobs <aurel@gnuage.org> Reviewed-on:
	http://openocd.zylin.com/1836 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-03-08  Andrey Smirnov <andrew.smirnov@gmail.com>

	* : kinetis: Revise CPU un-securing code Old version of the code had several problems, among them are:  * Located in a generic ADI source file instead of some Kinetis    specific location  * Incorrect MCU detection code that would read generic ARM ID    registers  * Presence of SRST line was mandatory  * There didn't seem to be any place where after SRST line assertion    it would be de-asserted.   * Reset was asserted after waiting for "Flash Controller Ready" bit    to be set, which contradicts official programming guide AN4835  * Mass erase algorithm implemented by that code was very strange:    ** After mass erase was initiated instead of just polling for the       state of "Mass Erase Acknowledged" bit the code would
	      repeatedly initiate mass erase AND poll the state of the "Mass
	      Erase Acknowledged"    ** Instead of just polling for the state of "Flash Mass Erase in       Progress"(bit 0 in Control register) to wait for the end of
	      the mass erase operation the code would: write 0 to Control       register, read out Status register ignoring the result and
	      then read Control register again and see if it is zero.   * dap_syssec_kinetis_mdmap assumed that previously selected(before    it was called) AP was 0.  This commit moves all of the code to kinetis flash driver and
	introduces three new commands: o "kinetis mdm check_security" -- the intent of that function is to
	  be used as 'examine-end' hook for any Kinetis target that has that
	  kind of JTAG/SWD security mechanism.  o "kinetis mdm mass_erase""  -- This function removes secure status
	  from MCU be performing special version of flash mass erase.  o "kinetis mdm test_securing" -- Function that allows to test
	  securing fucntionality. All it does is erase the page with flash
	  security settings thus making MCU 'secured'.  New version of the code implements the algorithms specified in
	AN4835 "Production Flash Programming Best Practices for Kinetis K-
	and L-series MCUs", specifically sections 4.1.1 and 4.2.1.  It also
	adds KL26 MCU to the list of devices for which this security check
	is performed. Implementing that algorithm also allowed to simplify
	mass command in kinetis driver, since we no longer need to write
	security bytes. The result that the old version of mass erase code
	can now be acheived using 'kinetis mdm mass_erase' Tested on accidentally locked FRDM-KL26Z with KL26 Kinetis MCU.  Change-Id: Ic085195edfd963dda9d3d4d8acd1e40cc366b16b Signed-off-by:
	Andrey Smrinov <andrew.smirnov@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2034 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2013-12-01  Salvador Arroyo <sarroyofdez@yahoo.es>

	* : mips32: cleanups in legacy pracc code This is the first patch
	intended to make a more precise pracc check when running in legacy
	mode (code executed by mips32_pracc_exec()).  It only makes some
	cleanups, mostly due to unnecessary code.  With the last cache
	optimizations for processor access (pa for short) all the pracc
	functions generate the code following some rules that make pa more
		easily to check: There are no load instructions from dmseg. All the
		read pas are instruction fetches. PARAM_IN related stuff is not
		needed.  Registers are restored either from COP0 DeSave or from
		ejtag info fields. PRACC_STACK related stuff is not needed any more.  	The code starts execution at PRACC_TEXT and there are no branch or
		jump instruction in the code, apart from the last jump to
		PRACC_TEXT.  The fetch address is ever known.  	For every store instruction to dmseg the function code sets 	the address of the write/store pa.  	The address of every store pa is known.  Current code ends
	execution when reading a second pass through PRACC_TEXT.  This
		approach has same inconveniences: If the code starts in the delay
		slot of a jump it makes a jump to PRACC_TEXT after executing the
		first instruction. A second pass through PRACC_TEXt is read and the
		function exits without any warning.  This seems to occur sometimes
		when a 24kc core is halted in the delay slot of a branch.  	If a debug mode exception is triggered during the execution of a 	function the core restarts execution at PRACC_TEXT. Again the
		function exits without any warning.  	If for whatever reason the core starts fetching  at an unexpected 	address the code now sends a jump instruction to PRACC_TEXT, but
		due to the delay slot the core continues fetching at whatever
		address + 4 and a second jump instruction will be send for
		execution. The result of a jump instruction in the delay slot of
		another jump is UNPREDICTABLE. It may work as expected (ar7241), or
		let the core in the delay slot of a jump to PRACC_TEXT for example.
		This means the function called next may also fail (pic32mx).  Change-Id: I9516a5146ee9c8c694d741331edc7daec9bde4e3 Signed-off-by:
	Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on:
	http://openocd.zylin.com/1825 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2013-08-24  Salvador Arroyo <sarroyofdez@yahoo.es>

	* : mips: load fast data transfer handler code with
	mips32_pracc_write_mem() Currently the code is loaded calling
	mips32_pracc_write_mem_generic().  Cache synchronization is not
	performed.  If configured as write back cache there is no chance to
	execute the handler. If configured as write through cache and the
	cache lines written to are not cache resident (I-side cache miss)
	may work.  The patch makes possible to execute the handler in a
	cached active memory segment (mainly from KSEG0), but nothing else.
	The data is still loaded without performing cache synchronization,
	code loaded may not be executable.  Performance may not be faster.
	At start, for example, the code resides in main memory, not in
	cache, and the core must transfer code from memory. We can really
	modify the code to force a wait for the first transfer like we do
	with start and end addresses, making sure the code is cache resident
	for the rest of the queued transfers.  This can also may happen if
	we execute code (greater than the I cache size) and the handler code
	is evicted from the cache.  Code tested on ar7241.  Change-Id: Iffdb4dae108b872fef0e7bacc5ea99649cdc1630 Signed-off-by:
	Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on:
	http://openocd.zylin.com/1564 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2014-01-18  Salvador Arroyo <sarroyofdez@yahoo.es>

	* : mips32: optimized cache code for pracc access Follows the the same rules of optimization used by all pracc
	functions.  Solves some bugs in previous code and adds support for
	write through caches.  Change-Id: If88c6738ca8c8197f327f22b766120a24f71b567 Signed-off-by:
	Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on:
	http://openocd.zylin.com/1557 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2014-05-08  Paul Fertser <fercerpav@gmail.com>

	* : README.OSX: recommend XCode 5 as that's the current version Using current "Command Line Tools" with XCode 4 is known to provoke
	issues (the build "hangs"), see e.g.
	http://stackoverflow.com/questions/18667916/xcrun-lipo-freezes-with-os-x-mavericks-and-xcode-4-xThis fixes https://sourceforge.net/p/openocd/tickets/70/ .  Change-Id: I511b347b9388e0e3f1d136b566915021c4b5fbde Reported-by:
	n321203 <n321203@users.sf.net> Signed-off-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2128
	Reviewed-by: Xiaofan <xiaofanc@gmail.com> Tested-by: jenkins
	Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>

2013-12-03  Kamal Dasu <kdasu.kdev@gmail.com>

	* : svf: Fix debug and error messages that print hex buffer Added SVF_BUF_LOG macro to properly print the hex buffer of parsed
	string for SIR, SDR, TDI, TDO and MASK. The original debug and error
	logs with respect to printing real values were misleading and also
	had endianess issues. All the bits are printed now instead of just
	u32 values.  Change-Id: Ie89902403bdb61ff458418446c2ca1253ea2a63f Signed-off-by:
	Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1964 Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Tested-by: jenkins

2014-03-20  Andrey Smirnov <andrew.smirnov@gmail.com>

	* : generalplus: Add configuration file for General Plus GP326XXXA
	series Add configuration file for General Plus GP326XXXA series. Tested on
	GP326833A on GPC-1737B board.  Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Change-Id:
	I1ad0e22598b01317bbc823870a7a262e9192c595 Reviewed-on:
	http://openocd.zylin.com/2058 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-04-28  Paul Fertser <fercerpav@gmail.com>

	* : Fix some C99 format specifiers As exposed by arm-none-eabi build, fix the wrong modifiers.  Change-Id: Ia6ce7c5c1d40e95059525c3e5d81b752df2fea7c Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2122 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-04-27  Paul Fertser <fercerpav@gmail.com>

	* : Restore normal development cycle Signed-off-by: Paul Fertser <fercerpav@gmail.com>

2014-04-22  Spencer Oliver <spen@spen-soft.co.uk>

	* : nrf51: remove dereference of null pointer found by clang 3.4.  Change-Id: Id499b546f65acd7a719498bc97e33b21d1ba565a Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/2119 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by:
	Andrey Smirnov <andrew.smirnov@gmail.com>

2014-04-15  Paul Fertser <fercerpav@gmail.com>

	* : Restore -dev suffix Signed-off-by: Paul Fertser <fercerpav@gmail.com>

2014-04-14  Paul Fertser <fercerpav@gmail.com>

	* : NEWS: minor fixes for rc2 Change-Id: Iba04baae4f3278db8b36283574a82c077d28bb4a Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2113 Tested-by: jenkins

2014-04-01  Seth LaForge <sethml@google.com>

	* : cortex_a: fix endiannes issues on  TI TMS570 The TI TMS470 and TMS570 series of processors are BE-32 processors,
	despite BE-32 not being supported by ARM in the Cortex-R4 core. TI
	hacked in BE-32 support, which requires odd swizzling in OpenOCD to
	make memory reads and writes function correctly. In particular,
	without this change, OpenOCD word reads and writes had the bytes
	reversed, and halfword and byte packed reads were reading garbage.
	In my testing, this change fixes these problems.  Change-Id: I21dd30f4b9003f20fcc85f674ab833407bb61f74 Signed-off-by:
	Seth LaForge <sethml@google.com> Reviewed-on:
	http://openocd.zylin.com/2064 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2014-04-12  Paul Fertser <fercerpav@gmail.com>

	* : mips32, dsp563xx: fix segfault on Gdb attach Since c6216201b249e6a97fcc085e413e3d34e0de6fb7 gdb target
	description generation support is enabled by default and it counts
	on checking "feature" pointer in reg_list. Both mips32 and dsp563xx
	neither used calloc nor explicitly set feature (as it was a newly
	introduced struct field).  This patch changes all targets to use calloc for consistency.  Change-Id: I9eceadef8b04aacb108e24ae23cb51ca3009586f Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2102 Tested-by: jenkins Reviewed-by:
	Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-04-06  Paul Fertser <fercerpav@gmail.com>

	* : jtag/drivers/remote_bitbang: use sizeof to determine maximum
	unix socket path length Different *nix systems use different constants, so sizeof should be
	used instead. This fixes the build on OS X (as sun_path length is
	hardcoded to 104 on Darwin).  Change-Id: I1df611383dedcfc6d153ec59b453a895c7d84e94 Reported-by:
	Xiaofan Chen <xiaofanc@gmail.com> Signed-off-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2095
	Tested-by: jenkins Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk> Reviewed-by: Xiaofan <xiaofanc@gmail.com>

2014-04-06  Lee Bowyer <lee@sodnpoo.com>

	* : tcl: bcm6348 target config, BT HomeHub v1 board config Also add the board to the firmware recovery script.  Change-Id: I4f9c895dae171df7249e3b1c0563b288518b9fe0 Signed-off-by:
	Lee Bowyer <lee@sodnpoo.com> Signed-off-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2097
	Tested-by: jenkins Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-04-01  Paul Fertser <fercerpav@gmail.com>

	* : openocd.rules: match CMSIS DAP devices by product string Since the standard requires to have "CMSIS-DAP" somewhere in product
	string, use that to automatically match all the compliant adapters.  Change-Id: I1e2ac088333a7d69a136af825248914339debdd8 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2082 Tested-by: jenkins Reviewed-by: Jörg
	Wunsch <openocd@uriah.heep.sax.de> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-04-07  Paul Fertser <fercerpav@gmail.com>

	* : target/cortex_a: check gdb_service before dereferencing in
	update_halt_gdb If gdb was disconnected by the moment the target entered halted
	state, update_halt_gdb would segfault.  Change-Id: I67477e9199c1df097be83a49e38602f975c083f5 Reported-by:
	Younes REGAIEG <younes.regaieg@imag.fr> Signed-off-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2098
	Tested-by: jenkins Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-03-30  Paul Fertser <fercerpav@gmail.com>

	* : Makefile.am: fix build for libftdi1, pass CFLAGS where
	appropriate Change-Id: I9d8afa6ae32fc01e69ec434b5bc9d71524d386a2 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2079 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Xiaofan
	<xiaofanc@gmail.com>

2014-03-30  Paul Fertser <fercerpav@gmail.com>

	* : flash/nor/at91sam3: remove sam3_page_write_opcodes Apparently this helper was never actually used, and current clang
	produces an unused const variable warning, so it's breaking the
	build.  Change-Id: Ib088bef5e9c0a48942c1d417d46f738469ee7e28 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2076 Tested-by: jenkins Reviewed-by:
	Xiaofan <xiaofanc@gmail.com>

2014-03-29  Paul Fertser <fercerpav@gmail.com>

	* : The openocd-0.8.0-rc1 release candidate Signed-off-by: Paul Fertser <fercerpav@gmail.com>

2014-03-29  Paul Fertser <fercerpav@gmail.com>

	* : Makefile.am: fix adding contrib directory for dist With extra / the directory was getting added as a subdirectory of
	itself.  Change-Id: I5a3d5635f3c949f39d88b34a2ddab8244643f560 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2070 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-02-10  Andrey Smirnov <andrew.smirnov@gmail.com>

	* : at91smad: Fixes to 'samd_protect' Some fixes to 'samd_protect' including:      - Fix a bug in which the value of 'set' parameter passed into
	     the function was ignored so it was impossible to remove flash      protection once it was set.       - Check the protection status of the sector via 'is_protected'      field of the  corresponding 'flash_sector' structure to see if      any actual HW manipulations needs to be done.       - Change the way the errors during protection activation are      handled. Now even in the case of error in the middle of      protecting a number of sectors the subroutine would still
	     update the state of the sector protection in sectors array so
	     as to avoid cases where openocd thinks that the sector is not
	     protected while it actually is.  Change-Id: I4cc6445a98ec13bdd94c89f0711c17840738a215 Signed-off-by:
	Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2027 Tested-by: jenkins Reviewed-by: Andrey
	Yurovsky <yurovsky@gmail.com> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2014-02-08  Andrey Smirnov <andrew.smirnov@gmail.com>

	* : at91samd: Bail early if trying to write to protected sector Bail early if trying to write to protected sector also mark the
	sector we are writing to as dirty.  Change-Id: I892f83461792e1cc2dcccade7aa65717831a6805 Signed-off-by:
	Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2025 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2014-03-22  Paul Fertser <fercerpav@gmail.com>

	* : tcl: introduce init_target_events and use it for gdb flashing
	events This introduces a new global Tcl procedure that is run just after
	init_targets and before init_boards.  Its default behaviour is to assign gdb-flash-erase-start and
	gdb-flash-write-end to reasonable defaults.  The rationale for doing "reset init" before gdb erases and flashes
	memory is that all flash drivers are written in assumption that they
	can safely be used only after chip reset (plus chip-specific
	configuration in the init handler if any). The need to use "reset
	halt" after flashing is because a user expects running firmware
	after loading to be the same as running it from power-on-reset.  Change-Id: I9ddc4047611904ca4ca779b73376d2739611948a Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2062 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-03-28  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: remove memory leaks Found by clang.  Change-Id: Ifb25dca52f8d9e8e46a35f0947a7239f26eb3757 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/2067 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Jörg
	Wunsch <openocd@uriah.heep.sax.de>

2014-03-28  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: remove handle_profile_command memory leak COMMAND_PARSE_NUMBER may return, thus any memory allocated may not
	be freed, simple reorder fixes the issue.  Change-Id: I0ce444a5b032f5c49b6d33a03a8c0b71cad49c8c Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/2065 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-01-27  Paul Fertser <fercerpav@gmail.com>

	* : Add all of contrib/ to dist, not just loaders Change-Id: I467e21de6805ea9f23ae483317d602e9d81e1148 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1909 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-01-27  Paul Fertser <fercerpav@gmail.com>

	* : Add rlink speed table sources and everything related to dist GPL requires providing sources for any derived work. I do not see
	any reason to not include the rlink stuff into release tarballs.  Change-Id: I686ab88994030312aca5bdfe731a72f10803b5c3 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1907 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-01-27  Paul Fertser <fercerpav@gmail.com>

	* : Add previous NEWS* files to dist Change-Id: I2f814e01c7b5aa9cd76e8e63c9c4a1ebbf3dd2ea Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1905 Tested-by: jenkins Reviewed-by: Luca
	Bruno <lucab@debian.org> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-01-27  Paul Fertser <fercerpav@gmail.com>

	* : doc: add "manual/" directory in its entirety to dist Change-Id: I750c2938ab207012a6488bf34f55d784e5e26b6e Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1903 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-03-17  Spencer Oliver <spen@spen-soft.co.uk>

	* : rtos: fix xml register support regression Seems that when xml register support was added the rtos code was not
	updated to match. This then caused gdb to return the following error
	when rtos support was enabled - "Remote 'g' packet reply is too
	long".  Change-Id: I7429c4b1efed120e2e690678d55f3d6e87ee1ff1 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/2054 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2014-03-17  Andrey Smirnov <andrew.smirnov@gmail.com>

	* : nrf51: Remove unnecessary explicit type casting Change-Id: I523e81645434760649ea2c00e6f80c2b08d08d94 Signed-off-by:
	Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2055 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2014-02-28  Andrey Smirnov <andrew.smirnov@gmail.com>

	* : nrf51: Add a known devices table and simple chip type detection
	code Unfortunately due to my oversight, the original version of the
	nrf51_probe function contained useless code that read the contents
	of DEVICEID[0] an DEVICEID[1] registers and did nothing about
	it(those registers had nothing to do with the device type
	information anyway).  This commit fixes that code by changing its behavior to read the
	HWID field of CONFIGID register and looking up the corresponding
	device information in the know devices table. This information is
	useful when choosing the versions of SDK and SoftDevice for the chip
	using "nRF51822 compatibility matrix".  Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Change-Id:
	Ibd80b35460df4278e86e0c2500b7dcc876eec10c Reviewed-on:
	http://openocd.zylin.com/2012 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-03-19  Andrey Smirnov <andrew.smirnov@gmail.com>

	* : armv7m: Do not ignore 'value' parameter in armv7m_write_core_reg Ignoring the value parameter in that function makes its code rather
	misleading. Also the only caller of it, armv7m_restore_context
	already does the whole "buf_get_u32" conversion business, so using
	'value' also removes the waste of doing the conversion twice.  Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Change-Id:
	I515979c314d9b59ee1065c55b5bb5747c7e93f01 Reviewed-on:
	http://openocd.zylin.com/2057 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-02-12  Angus Gratton <gus@projectgus.com>

	* : AT91SAM4L: Fix bug when writing to flash at a non-zero offset,
	add debug output for flash page writes The offset wasn't being considered in the "full page" write
	codepath, so any writes at an offset were actually written out
	starting from page 0.  Change-Id: I5e70a1f35f144b3edd1ce6d9df9af9b5da6cf194 Signed-off-by:
	Angus Gratton <gus@projectgus.com> Reviewed-on:
	http://openocd.zylin.com/1965 Tested-by: jenkins Reviewed-by: Andrey
	Yurovsky <yurovsky@gmail.com> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2014-03-13  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : Support for sam3n0a sam3n0b sam3n00a sam3n00b Change-Id: I70a04f5f9b0b20d42a677ea8781130e44be758d3 Signed-off-by:
	Stefan Arnold <sarnold@sh-sw.de> Signed-off-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2042 Tested-by: jenkins Reviewed-by: Stian
	Skjelstad <stian@nixia.no> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2014-02-28  Felipe Balbi <balbi@ti.com>

	* : cfg: add TI am43xx devices This adds support for the am43xx SoC and the AM437x GP EVM and
	AM438x ePOS EVM.  Change-Id: I09cbb09072f38e0e08fdd520dedb6e67d45056be Signed-off-by:
	Felipe Balbi <balbi@ti.com> Signed-off-by: Tom Rini <trini@ti.com>
	Reviewed-on: http://openocd.zylin.com/2047 Tested-by: jenkins
	Reviewed-by: Paul Fertser <fercerpav@gmail.com>

2014-01-27  Oleksij Rempel <linux@rempel-privat.de>

	* : mips_ejtag.c: disable DMA for all platforms DMA seems to be broken in many ways. Don't trust it! Change-Id: I7e28608f299abdf78d02a967c62849b6b2ce5985 Signed-off-by:
	Oleksij Rempel <linux@rempel-privat.de> Reviewed-on:
	http://openocd.zylin.com/1936 Tested-by: jenkins Reviewed-by: Antony
	Pavlov <antonynpavlov@gmail.com> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2014-03-05  Jens Hoffmann <jehoffma@gmail.com>

	* : cfg: Added st nucleo board configs.  This patch adds board configs for Nucleo FXXX boards.  Change-Id: I25bfd7d63f734bad710917efa67bc6096aa60ef8 Signed-off-by:
	Jens Hoffmann <jehoffma@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2022 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-03-06  Paul Fertser <fercerpav@gmail.com>

	* : tcl/interface/ftdi: add Digilent JTAG-SMT2 config Tested on ZedBoard by Tim Sander.  Change-Id: I4316d9b4d36f01bbe91a46c78ea8bca22efb1a5a Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2029 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-03-14  Jrg Wunsch <openocd@uriah.heep.sax.de>

	* : CMSIS-DAP: print a debug message when the USB product string
	cannot be read As suggested by Stian Skjelstad in a comment in: http://openocd.zylin.com/#/c/2044/ if the USB product string cannot be read, provide a debug message so
	users might get aware of a potential permission problem when looking
	at the debug output.  Fix style bug found by Jenkins.  Change-Id: I6acb1c6261fec6f2bee80e4be513a5c5e29eff79 Signed-off-by:
	Jörg Wunsch <openocd@uriah.heep.sax.de> Reviewed-on:
	http://openocd.zylin.com/2048 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-03-14  Jrg Wunsch <openocd@uriah.heep.sax.de>

	* : All Atmel-provided CMSIS-DAP devices use 512 byte packet size The existing CMSIS-DAP driver matches the USB VID/PID against 0x3eb
	(Atmel VID) and 0x2111 (Atmel EDBG embedded CMSIS-DAP debugger), and
	then bumps the packet size from its default of 64 to 512.  However,
	it turned out that *all* Atmel-provided CMSIS-DAP devices (EDBG with
	PID 0x2111; JTAGICE3 with firmware version 3.x, PID 0x2140; new
	Atmel-ICE [successor of JTAGICE3], PID 0x2141) require a 512-byte
	packet size.  Obviously, all run the same USB implementation inside
	their custom microcontroller.  Thus, it seems best to simply assume
	that *all* Atmel CMSIS-DAP devices use this packet size, and don't
	check the PID at all.  This has also been filed as Trac bug #68: https://sourceforge.net/apps/trac/openocd/ticket/68 Change-Id: I942af93060fdf265fca3961841638caa6182f877 Signed-off-by:
	Jörg Wunsch <openocd@uriah.heep.sax.de> Reviewed-on:
	http://openocd.zylin.com/2045 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andrey Yurovsky
	<yurovsky@gmail.com>

2014-03-09  Jens Hoffmann <jehoffma@gmail.com>

	* : stm32f2x.c: Add STM32F401xE device id.  Nucleo F401 board uses STM32F401RE chip with new device id and got
	more flash than existing devices (512K). This patch adds new the
	identifier to probe functions so flashing will now work.  Change-Id: Ibe9c047c79244db0cfbb06610da9d84987b9f85a Signed-off-by:
	Jens Hoffmann <jehoffma@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2037 Tested-by: jenkins Reviewed-by: Andrey
	Yurovsky <yurovsky@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-03-10  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : flash/kinetis: Fix bug in odd byte count padding Change-Id: Ic5cfd880f2b49e3a96c408cf868db622bfe698a1 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2039 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-03-11  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : target: Don't poll until the target is examined.  The timer callback is started on target init, but it makes no sense
	to poll until the target is fully setup.  Change-Id: I118201e125e39be3d0a920e3ef9a3f68a2035f39 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2041 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-03-09  Paul Fertser <fercerpav@gmail.com>

	* : tcl/board: add config for DP Bus Blaster reconfiguration Reported and tested by Gracana on IRC.  Change-Id: If0524d2d627d566e8b5e1d00784dd7556f44b125 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2036 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-03-04  Bartosz Bielawski <bartosz.bielawski@gmail.com>

	* : stlink_usb.c: add support for STLink V2-1 The new version of STLink (V2-1) has a different USB endpoint
	layout.  As the PID of the device also changed it's possible to
	change EPs used by OpenOCD in runtime. The patch adds three new
	fields to stlink_usb_handle_s and assigns right EP numbers in
	stlink_usb_open().  Parts of the code inspired by and used with
	consent of Jens Hoffmann.  Change-Id: I93b69fb889f15317e9bf864905f435905db39745 Signed-off-by:
	Bartosz Bielawski <bartosz.bielawski@gmail.com> Reviewed-on:
	http://openocd.zylin.com/2019 Tested-by: jenkins Reviewed-by: Nemui
	Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-03-03  Tom Rini <trini@ti.com>

	* : interface/ftdi/xds100v2.cfg: Add another VID/PID, drop desc The XDS100v2 is often embedded in a number of platforms using the
	VID/PID of 0x0403/0x6010 and a generic FTDI device description.  Add
	this VID/PID combination and remove the description line.  Change-Id: I370e6199ac24f802426e9541e19ee38f18f1209a Signed-off-by:
	Tom Rini <trini@ti.com> Reviewed-on: http://openocd.zylin.com/2016
	Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
	Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-02-28  Andrey Smirnov <andrew.smirnov@gmail.com>

	* : nrf51: Fix format string bugs in nrf51_info Additional information string appended to the 'flash info' output
	used incorrect offsets and was missing a couple of fields.  Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Change-Id:
	If131be021295cab6adfca7da03c2f0fb8dca7d42 Reviewed-on:
	http://openocd.zylin.com/2011 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-10-24  Kamal Dasu <kdasu.kdev@gmail.com>

	* : cortex_a: Fix endianess issues in cortex_a8_*_apb_ab_memory Make the APB-AB memory read routines handle endianess order when
	running on big endian host. cortex_a8_read_apb_ab_memory is also
	called by cortex_a8_write_apb_ab_memory and was breaking both APB-AB
	read and write functions. Also fixed bug in write function in
	calculating the offset of end of buffer data. The change aslo fixes
	the read issues with all combinations of aligned unaligned memory
	access found by 'test_mem_access' cmd.  Tested with target "test_mem_access 4000", also size 1-9, 'mdb/h/w'
	'mwb/h/w' cmds and equivalent gdb 'x' 'set' cmds.  Change-Id: Ia927c60c4837617f5342a9beb6fdab1f061855fe Signed-off-by:
	Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1781 Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Tested-by: jenkins

2013-07-22  Brad Riensche <brad.riensche@gmail.com>

	* : target: "dap info" command cosmetic output changes This makes the listing easier to read, imho. The tab indentation
	technique causes the base address to precess as the parser proceeds
	through the subtables, and can easily wrap.  Change-Id: Iea5e678255e6314a9d532e4b222a2572b5394390 Signed-off-by:
	Brad Riensche <brad.riensche@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1518 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-02-24  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : Rename and sort udev rules file Also add missing entries for JTAG-lock-pick Tiny 2, Xverve
	Signalyzer LITE and default FTDI VID:PIDs.  Change-Id: I41b4f15409642298d1cf134d1f8014dc8f003005 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1969 Tested-by: jenkins

2014-03-04  Spencer Oliver <spen@spen-soft.co.uk>

	* : gdbserver: fix duplicate declaration commit da0d1e37 did not merge correctly, causing the build to fail.  Change-Id: I3f525054bb38b7ee29bf27309bb2e6a5bb8329c7 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/2020 Tested-by: jenkins

2014-02-25  Jens Bauer <jens@gpio.dk>

	* : CMSIS-DAP: Fix build errors on Mac OS X Rename the argument variable 'wait' to 'delay', as 'wait' conflicts
	with an API function declared in system header
	/usr/include/sys/wait.h on Mac OS X.  Change-Id: I5742da6e5def6e5ec197e774c3844e4bf0424569 Signed-off-by:
	Jens Bauer <jens@gpio.dk> Reviewed-on: http://openocd.zylin.com/1973
	Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com>
	Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

2014-02-14  Christian Eggers <ceggers@gmx.de>

	* : Constify received GDB packet v2: - Split work into separate patches The received packet will not be altered in any of the processing
	functions.  Some it can be made "const".  Change-Id: I7bb410224cf6daa74a6c494624176ccb9ae638ac Signed-off-by:
	Christian Eggers <ceggers@gmx.de> Reviewed-on:
	http://openocd.zylin.com/1919 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-02-03  Christian Eggers <ceggers@gmx.de>

	* : Remove unneeded zero termination of received packet v2:   removed curly braces around single statement if-block packet[] has already been zero terminated in gdb_input_inner() This
	change is necessary in order to make packet[] "const".  Change-Id: I978bbe52d151a63574db77fb747f596da256d377 Signed-off-by:
	Christian Eggers <ceggers@gmx.de> Reviewed-on:
	http://openocd.zylin.com/1922 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-02-01  Christian Eggers <ceggers@gmx.de>

	* : RTOS: Unify wipe-out of thread list Each RTOS implementation uses it's own (similar) code to free the
	thread list. There are some additional issues: <---> if (pointer != NULL) 	free(pointer); <---> This is not necessary, free(NULL) is perfectly
	ok.  <---> free(rtos->thread_details); rtos->thread_details = NULL;
	rtos->thread_count = 0; <---> The 3rd line has been missing for all
	RTOS but ChibiOs. There are paths in the code where
	rtos->thread_count is never set to NULL, which can lead to null
	pointer dereference of rtos->thread_details.  Change-Id: I6f7045c3d4518b925cb80dd5c907a566536b34ad Signed-off-by:
	Christian Eggers <ceggers@gmx.de> --- Changelog: v7: - rtos_wipe_threadlist() --> rtos_free_threadlist() - removed non related changes in gdb_server.c from this patch v3: - Removed world "topic" from first line of commit message v2: - typo: "whipe" --> "wipe" Reviewed-on:
	http://openocd.zylin.com/1916 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-02-11  Nemui Trinomius <nemuisan_kawausogasuki@live.jp>

	* : fm3: fix erase flash fail on using High Level Adapters.  This fix can "erase flash" on using High Level Adapters by running
	algorithm.  Because fm3 flash commands must need true 16-bit memory
	access, but High Level Adapters(ST-Link/TI-ICDI) can 8/32bit access
	only.  Tested on MB9BF618T and MB9AF112K with STLink/V2.  Change-Id: I849a8a8e8ae2b3e77717de04f7522cf718c915d7 Signed-off-by:
	Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on:
	http://openocd.zylin.com/1944 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-02-07  Andrey Smirnov <andrew.smirnov@gmail.com>

	* : nrf51: Implement the support for Nordic's nRF51 devices Add support for Nordic's nRF51 chip series. Tested with nRF51822.  Change-Id: Id70f6fd76888cc595a353aefb84d25c4cd325d7d Signed-off-by:
	Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1945 Tested-by: jenkins Reviewed-by: Andrey
	Yurovsky <yurovsky@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-02-04  Paul Fertser <fercerpav@gmail.com>

	* : tcl/drscan: handle invalid syntax with a conditional, not assert When "drscan" command is used improperly, such as in: drscan
	stm32f1x.cpu -endstate drpause there're no fields to scan, and so
	the assert leads to a segfault. This should be treated like any
	other syntax error instead.  Change-Id: Id1743f5d641038e1e3754c6f3097aabc5d1916b9 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1927 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-02-15  Paul Fertser <fercerpav@gmail.com>

	* : drivers/ftdi: warn the user if he tries to use undefined reset
	signals It is really an error to try to use a reset_config that doesn't
	match adapter's capabilities, however OpenOCD has no way to specify
	them.  Using wrong reset_config might lead to very confusing behaviour, so
	I think LOG_ERROR is justified here.  Change-Id: I1c6dcfa7c0d78829229a850189cad646b565dd66 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1948 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-02-16  Fatih Aşıcı <fatih.asici@gmail.com>

	* : cfg: Make stm32f4x usable with SWD transport Change-Id: Ib8f3b414ec3c31cf8a112e75efe003e2237c59bb Signed-off-by:
	Fatih Aşıcı <fatih.asici@gmail.com> Signed-off-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1951 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Nemui Trinomius
	<nemuisan_kawausogasuki@live.jp>

2014-01-30  Paul Fertser <fercerpav@gmail.com>

	* : arm926ejs: fix write memory operations with caches enabled Perform proper ICache flush operations on memory writes. This should
	fix inability to use software breakpoints for debugging with caches
	enabled.  This patch is only compile-time tested.  Commit 1137eaedaf6498f3448cdedf6f93076d9b3fd58a fixed the same issue
	for arm920t. Among all the arm7_9_common targets only arm926ejs
	seems to be broken in the same way.  Change-Id: I575306ac4319a69fc637b42f7c958f4595c5e81f Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1912 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-02-06  Pete Batard <pete@akeo.ie>

	* : doc: update README.Windows with new Zadig download URL As the old SF repository indicates, newer downloads have been moved
	to an alternate server, and 3 new releases of Zadig have already
	occurred there.  Change-Id: I8ff967fd834e9c8dd2cce9dcbbe07e03d2b33e4a Signed-off-by:
	Pete Batard <pete@akeo.ie> Reviewed-on:
	http://openocd.zylin.com/1940 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by:
	Xiaofan <xiaofanc@gmail.com>

2014-02-03  Kuldeep Singh Dhaka <kuldeepdhaka9@gmail.com>

	* : nor/flash/stm32f1x: add stm32f07x support Added configuration to work with stm32f07x.  Tested on
	stm32f072discovery with libopencm3 stm32f0 blink example.  Change-Id: I63cdc9bf1f28f5951d6b4faac871cfde331c9c78 Signed-off-by:
	Kuldeep Singh Dhaka <kuldeepdhaka9@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1921 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2014-01-22  Anton Kolesov <anton.kolesov@synopsys.com>

	* : gdb_server: Fix confusing warning when entering noack mode Comment in gdb_server code mistakenly attributed constant warnings
	about unexpected acknowledgement to the ACK packet sent by GDB when
	establishing connection. However that is not the case, OpenOCD
	gdb_server is handling this packet correctly without an warnings.
	This warning instead was caused by the ACK packet which GDB sends
	right after going into noack mode. Because OpenOCD gdb_server is
	already in noack mode at this state, it emits warning about it. This
	is a documented GDB behaviour

	(https://sourceware.org/gdb/onlinedocs/gdb/Packet-Acknowledgment.html)so there is no reason to scare users with warnings in this case.  This patch basically introduces two-level noack mode: after
	receiving QStartNoAckMode gdb_server will set noack_mode to 1, then
	it will receive this last ACK packet, but instead of printing a
	warning, noack_mode will be increased to 2. Should there be any
	other ACK packets after that, they will be properly reported by
	warning. All other code that relies on noack_mode checks it for "!=
	0", so there will be no difference if it is 1 or 2.  Change-Id: I0e9c57fd93293bfe010390db2f3f161528b11d86 Signed-off-by:
	Anton Kolesov <anton.kolesov@synopsys.com> Reviewed-on:
	http://openocd.zylin.com/1895 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-01-17  Paul Fertser <fercerpav@gmail.com>

	* : flash/nor/mdr.c: fix uninitialised variable warning Caught (actually, it's breaking the build) by clang 3.3.  Change-Id: Ife6fabf8a57e6c90ab45aaaf75557c984ac6772c Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1875 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-01-17  Paul Fertser <fercerpav@gmail.com>

	* : target/nds32_disassembler: fix format specifiers warnings According to the standard every operation returns at least an
	integer, so PRIu8 format specifier is not suitable for these values
	as is.  This breaks build on OS X (x86_64-apple-darwin13.0.0) with "Apple
	LLVM version 5.0 (clang-500.2.79) (based on LLVM 3.3svn)".  Fix by adding appropriate casts. In fact there's plenty of room (and
	I'd say necessity) for factoring out common code in there, but it's
	too invasive for a non-maintainer.  Change-Id: I7d2182eb1d2f86fa22c882fbbaa6cfadf1c3e8fc Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1878 Tested-by: jenkins Reviewed-by:
	Xiaofan <xiaofanc@gmail.com> Reviewed-by: Hsiangkai Wang
	<hsiangkai@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-01-17  Paul Fertser <fercerpav@gmail.com>

	* : rtos: fix uninitialised variable warning Breaks build with clang 3.3. This "addr" variable is actually always
	ignored by next_symbol() when cur_symbol is an empty string but
	clang can't (and probably shouldn't) prove that automatically.  Change-Id: Id030f1aa34b9d40b5fa20a422031511520e52669 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1876 Tested-by: jenkins Reviewed-by:
	Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2014-02-02  Paul Fertser <fercerpav@gmail.com>

	* : interface/ftdi: add TUMPA Lite config TUMPA Lite is a cheap FT232H-based breakout board, without any
	buffering. It also lacks series resistors so for some targets
	(especially when not using ridiculously short wires) one needs to
	add about 47 Ohms in series on every high-speed line.  The SRST line is connected directly to the FT232H too.  Real-life tested (including SRST and TRST).  Change-Id: I5ed4f88d8d20384e9c52efe2ff0c290e2650d43e Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1918 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-01-27  Spencer Oliver <spen@spen-soft.co.uk>

	* : doc: update CMSIS-DAP info to match default driver behaviour By default the driver will now auto detect attached adapters, it
	does not use an internal list any more. Update docs to match this.  Change-Id: I62a9d243cd236a8cf54cbd9d088c4837a8df31bf Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1902 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2014-01-25  Antony Pavlov <antonynpavlov@gmail.com>

	* : top .gitignore: ignore .dirstamp files Just after succesfull build you can see some untracked files in the
	'git status' output: 	src/jtag/drivers/versaloon/.dirstamp 	src/jtag/drivers/versaloon/usbtoxxx/.dirstamp This commit fixes the problem.  Change-Id: I1674eb4423e97c5f0a47f216981eaffdc351f784 Signed-off-by:
	Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1898 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2013-08-22  Luca BRUNO <lucab@debian.org>

	* : Add GDB remote target description support for ARM4 This commit adds support for passing the ARM4 target description to
	GDB when enabling gdb_target_description, in order to expose all
	banked registers.  Change-Id: Id618bc6226f00fe83397ea28888a84b64b09cafd Signed-off-by:
	Luca BRUNO <lucab@debian.org> Reviewed-on:
	http://openocd.zylin.com/1810 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-01-15  Andrey Yurovsky <yurovsky@gmail.com>

	* : flash: samd: declare const data Make the chip information lookup tables const (thanks to Spencer
	Oliver for pointing this out).  Also fix spacing on one macro.  No
	functional changes.  Change-Id: I053c4951c2626b8aa4541a79673b500394ef08e8 Signed-off-by:
	Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1874 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-01-17  Paul Fertser <fercerpav@gmail.com>

	* : Add CMSIS-DAP information to the READMEs.  Change-Id: I8c87d559adf07b0f0702fe9d388f26bf046bcb8b Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1880 Tested-by: jenkins Reviewed-by:
	Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-11-07  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : Retire jtag_add_dr_out The out only version of jtag_add_dr_scan smells like a bogus
	optimization that complicates the minidriver API for questionable
	gain.  The function was only used by four old ARM targets. Rewrite the
	callers to use the generic function and remove all implementations.  Change-Id: I13b643687ee8ed6bc9b6336e7096c34f40ea96af Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1801 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-01-11  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: add Freescale FRDM-KL46Z Board Change-Id: Ib585728f13a380eeeb2ada095f3e1a1c2aaf44cb Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1866 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-01-13  Spencer Oliver <spen@spen-soft.co.uk>

	* : cortexm: use Cortex-M rather than cortex-m3 for dwt registers Change-Id: I28e3a8c65ccc4a4e3ec94e41c846e6a263c165e8 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1865 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2014-01-13  Robert P. J. Day <rpjday@crashcourse.ca>

	* : Grammatical cleanup to Tcl Scripting chapter of User's Guide Changes solely to the Tcl Scripting API chapter of the UG: * Some grammatical cleanup * Fix formatting issues (@example and @verbatim formatting) * Add references to missing OSes OpenBSD, NetBSD and eCos.  Change-Id: I3ec1a192a0b1e0a207dceb76fd39008d01e287a5 Signed-off-by:
	Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on:
	http://openocd.zylin.com/1872 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-12-29  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : cortex_m: Avoid unnecessary saving and restoring of DCRDR This is used for the emulated DCC channel which is only maintained
	as long as target->dbg_msg_enabled is set. Skip the saving and
	restoring if not enabled to save one dap_run() per core register
	access.  Note that we could've probably queued all core register accesses in
	the same transaction if the armv7 register framework hadn't required
	synchronous register accesses.  Change-Id: I4fe6d713261ee5db42422203eb63035fdcc48891 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1848 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-12-29  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : cortex_m: Fix possible endianness problem in emulated DCC
	channel Change-Id: If7104464a8c65085f3ceac445e9c9be8446f2da9 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1846 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-12-27  Nemui Trinomius <nemuisan_kawausogasuki@live.jp>

	* : lpc2000: fix LPC810 programming support IAP commands fail on programming LPC810 because it has only 1kByte
	of SRAM.  This patch is fixing cmd51_max_buffer suitable size for
	LPC810,LPC811 and other LPC1000 series.  Tested on a
	LPC810,LPC812,LPC11u14,and LPC1114(DIP28).  Change-Id: Iecec9fd963cb63bdff4a7bd3bbf4f8b1a7c60fbd Signed-off-by:
	Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on:
	http://openocd.zylin.com/1843 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-01-11  Robert P. J. Day <rpjday@crashcourse.ca>

	* : Remove obsolete tip referring to 2010 removal of TAP numbers.  Remove a tip describing the discouraged use of TAP numbers, and how
	these numbers would be removed by mid-2010.  Change-Id: Iebe7e2e4a0f8e1f18a91d7935588dd9ced2b398d Signed-off-by:
	Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on:
	http://openocd.zylin.com/1862 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-01-09  Robert P. J. Day <rpjday@crashcourse.ca>

	* : Some minor URL fixes and typo fixes, no functional changes.  Change-Id: Ib262d9e6330c35d26868942b821de7b53e00b854 Signed-off-by:
	Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on:
	http://openocd.zylin.com/1859 Tested-by: jenkins Reviewed-by: Bill
	Traynor <btraynor@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-09-19  Andrey Yurovsky <yurovsky@gmail.com>

	* : add support for Atmel SAM4L NOR Flash This adds a new NOR Flash driver, "at91sam4l", which supports the
	built-in Flash on Atmel's low-power SAM4L family of Cortex M4 MCUs.
	Parts and their geometry are detected automatically using the Chip
	ID and lookup schemes described in document 42023E–SAM–07/2013.  Tested on AT91SAM4LC4CA via the SAM4L XPlained Pro development kit.  Change-Id: If73499dee92cc8ce231845244ea25c6984f6cecd Signed-off-by:
	Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1639 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-08-06  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: add stm32 cmsis-dap compliant config Change-Id: I3cfb21fdcef830e22b03bf4b5d58993728cc7475 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1543 Tested-by: jenkins

2014-01-08  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : command: Fix formatting for empty usage string Introduced by requirement in 54d6330b.  Change-Id: If3dba057127b54b15ca7f364f37c6286d34f77e0 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reported-by:
	Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on:
	http://openocd.zylin.com/1858 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-12-30  Paul Fertser <fercerpav@gmail.com>

	* : tools: add firmware recovery helpers This adds a set of helper functions with the aim to make it possible
	to flash mass-market devices without RTFMing altogether (i.e. to
	obsolete GPL-violating proprietary tjtag and other similar
	software).  Real-life tested on an RT-N16 and WRT54GL.  Change-Id: I197a9b28a5f386803f081057c4b4ebf2f9c447b1 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1850 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-12-30  Paul Fertser <fercerpav@gmail.com>

	* : tcl: add bcm47xx config and Asus RT-N16 board using it This adds the bcm47xx config with the special undocumented trick to
	put it into standard EJTAG mode from the mystic "LV mode".  The RAM setup is not done as it would require considerable efforts
	without much practical gain.  The only issue I noticed so far is that "reset" doesn't actually
	reset the chip.  Unfortunately, it's unclear how to make it work properly with SRST
	as OpenOCD asserts it in MIPS-specific code so the device will enter
	LV mode again but the LV tap is already disabled by that time, so
	it's not possible to send the magic command again.  Anyway, this config is more than enough to "recover" any RT-N16
	provided the hardware is not damaged.  Change-Id: I0894e339763e6d20d1c93341c597382b479d039b Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1849 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2014-01-08  Robert P. J. Day <rpjday@crashcourse.ca>

	* : Update URLs and names in amdm37x.cfg, no functional changes.  * openocd.berlios.de -> openocd.sourceforge.net * Update link to AM/DM37x Technical Reference Manual (ver R) *
	"ICEpick" is properly spelled "ICEPick" according to TI Change-Id: Ie04458e82c97ef766ec03bd9b9f27edadf5d1cb2 Signed-off-by:
	Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on:
	http://openocd.zylin.com/1856 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-12-29  Franck Jullien <franck.jullien@gmail.com>

	* : jtag_vpi: make the server address configurable Change-Id: I58e89c789b79ffb0b54ef94d208be876c271ddf7 Signed-off-by:
	Franck Jullien <franck.jullien@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1840 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-12-28  Steve Moorby <steve.moorby60@gmail.com>

	* : topic: Added Spansion S25FL128S and S25FL256S spifi devices.  S25FL256S device tested on mbest LPC4357 EVM, S25S128S untested but
	from the same data sheet.  Change-Id: Idf58416aab08671fe29d22c3c34c2118b25a9d45 Signed-off-by:
	Steve Moorby <steve.moorby60@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1844 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2013-11-10  Mathias K <kesmtp@freenet.de>

	* : stlink: remove stlink_api command Remove stlink_api command.  Change-Id: I8f7885d3756fec462f9ebbee2ed285a98a51366c Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/1760 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-07-30  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : Add %APPDATA%\OpenOCD to script search path on win Change-Id: I01e9715fe064f3ff41e41a59a4764d6474f82183 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1797 Tested-by: jenkins Reviewed-by: Jens
	Bauer <jens@gpio.dk> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-11-20  Alex Murray <alex.murray@cohdawireless.com>

	* : target/imx6: Fix typo in setting _SJC_TAPID from SJC_TAPID
	variable The set command was missing the $ prefix on the SJC_TAPID variable
	and so would fail if SJC_TAPID was set Change-Id: Ib9af58f5188bd8a2bc3f888309f203d624476c27 Signed-off-by:
	Alex Murray <alex.murray@cohdawireless.com> Reviewed-on:
	http://openocd.zylin.com/1811 Tested-by: jenkins Reviewed-by: Jens
	Bauer <jens@gpio.dk> Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
	Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

2013-10-30  Mathias K <kesmtp@freenet.de>

	* : build: remove hard coded ftdi and usb libraries This patch remove the hardcoded libraries. Also a check for libftdi1
	installations was added. This check fix an issue with gentoo and
	maybe other systems.  Change-Id: Ieff9ec4d66ee0f3e6b22261a10e4cab9f26b6b51 Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/1759 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-11-07  Paul Fertser <fercerpav@gmail.com>

	* : target: add kl25z HLA (stlink) config Based on Nemuisan Tokusei's. Untested, but original config was
	reported to work ok.  Change-Id: Ic991dce55bfca266880081fe2bbd9e6e263b0fc0 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1803 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-11-17  Nemui Trinomius <nemuisan_kawausogasuki@live.jp>

	* : cfg: Add new BSTAPID for STM32F42xxx and STM32F43xxx series STM32F42xxx & STM32F43xxx series boudary scan TAP-ID are differ from
	STM32F405xx/07xx & STM32F415xx/17xx.  And Section number was also
	fixed for RM0090 rev5.  Tested on a STM32F427IIT6 and STM32F429ZIT6.  Change-Id: Ie9c54c55b97b9c396ace752d94ea2ad916cc8479 Signed-off-by:
	Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on:
	http://openocd.zylin.com/1808 Tested-by: jenkins Reviewed-by: Jens
	Bauer <jens@gpio.dk> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-11-25  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : versaloon: Finish support for serial number matching Add a command to specify the serial string and pass it to the find
	helper.  Actual matching was already supported for both serial and
	product but was using hard coded string indices. Instead use the
	indices from the device descriptor.  Change-Id: I17c7538e5ad301ef41eace1ee70a202adab23bb4 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1816 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-11-25  Paul Fertser <fercerpav@gmail.com>

	* : ftdi/neodb.cfg: mark as tested Working against openmoko gta02 target, including TRST and SRST (the
	stupid samsung chip fully resets under trst, so it's actually of
	little use here).  Change-Id: I831124659fc12efbccef536f07d15509c2112f92 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1814 Tested-by: jenkins Reviewed-by:
	Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-12-10  Andrey Yurovsky <yurovsky@gmail.com>

	* : stm32lx_dual_bank.cfg: fix typo in file path s/stm32l1x/stm32lx ...this makes tm32lx_dual_bank.cfg work again.  Change-Id: I04dc617523caa6b46c675fe9b700d1bbe88170e6 Signed-off-by:
	Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1832 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-08-22  Luca BRUNO <lucab@debian.org>

	* : NULL check before dereferencing Check reg_list[i]->feature for NULL pointers before checking
	feature->name in order to avoid NULL access.  Change-Id: If20401a6c5aa5e1e29f0fcf9bb95585b49658832 Signed-off-by:
	Luca BRUNO <lucab@debian.org> Reviewed-on:
	http://openocd.zylin.com/1809 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se> Reviewed-by: Jens Bauer <jens@gpio.dk>

2013-11-21  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : Add byte-swap helpers Change-Id: I970616bb0e2bbc693165a0d311840febbd9134f1 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1798 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se> Reviewed-by: Franck Jullien
	<franck.jullien@gmail.com>

2013-10-24  Per Ekman <pekenator@gmail.com>

	* : kinetis : Add flash read support to the kinetis nor flash
	driver.  The default_flash_read() function seems to work ok.  Change-Id: Ia34c4642405f669ff63310fa8c641098b771a401 Signed-off-by:
	Per Ekman <pekenator@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1763 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-10-24  Mathias K <kesmtp@freenet.de>

	* : hla: Make consistent parameter naming Rename fd to handle.  Change-Id: I98615aed1546976d00b0f20856d4e8e75f83c575 Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/1761 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-11-04  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : ulink: Fix libusb include changed since pkg-config merge Change-Id: I1556aaf117f99de046e3c16d5386faaaefdfefd8 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1795 Reviewed-by: Peter Stuge
	<peter@stuge.se> Tested-by: jenkins

2013-11-01  Andrey Yurovsky <yurovsky@gmail.com>

	* : stm32l flash: add another device ID Add device ID 0x437, a dual-bank part with 512KB total.  This one
	used the Medium+/HD flash size register to read the flash size in Kb
	rather than the 0/1 code in the Medium+ parts.  Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Change-Id:
	I870fe3bb1b473939b7211c3b2edb44b4b3643648 Reviewed-on:
	http://openocd.zylin.com/1790 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-11-04  Nemui Trinomius <nemuisan_kawausogasuki@live.jp>

	* : fm3: fix Fujitsu MB9Ax family support Some MB9Ax (especially few internal SRAM model) fails programming
	because of wrong SRAM basic-address on running algorithm.  Default
	SRAM basic-address must be 0x20000000.  This patch is fixing default
	SRAM basic-address and ramcode offset.  Tested on a MB9BF618T and
	MB9AF112K.  Change-Id: Ibda9aceb4c317bcae0dcce9f6d0fd1c4b5d81952 Signed-off-by:
	Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on:
	http://openocd.zylin.com/1793 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-10-31  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : lpcspifi: Fix byte order bug Found by grepping for pointer casts.  Change-Id: I42ef3ebcce9fc6391154888b48601ede8377c34e Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1771 Tested-by: jenkins Reviewed-by: Jens
	Bauer <jens@gpio.dk> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-09-30  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : smp: Fix byte order bug Found by grepping for pointer casts.  Also rewrite to reduce scope and allocate the few bytes needed on
	stack instead of on heap.  Change-Id: Ia2a369fb612e807b981ee60ebcfd9c09c2fbdf4c Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1779 Tested-by: jenkins Reviewed-by:
	Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-09-28  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : ioutil: Remove unnecessary casts and fix const-discarding Using the right parameter type, there's no need to resort to
	casting.  Change-Id: I8aec852431ead26e24793fd6fac8781353963bf2 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1777 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Jens Bauer
	<jens@gpio.dk>

2013-09-28  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : str9x: Fix byte order bug Found by grepping for pointer casts.  Change-Id: Ie2d698310b077c3849266e81df8e6a808cbc6896 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1775 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-09-28  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : stm32f1x: Fix byte order bug and remove unnecessary cast Found by grepping for pointer casts.  Change-Id: Ibd8f22a9e9ca71459ba0bedc8447a3623d0e4184 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1773 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-09-28  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : lpc2900: Fix byte order bugs and remove unnecessary casts Found by grepping for pointer casts.  Change-Id: Ib94957a0c53ec7abcbd5787d8c70e20c9eedc4b7 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1770 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-09-28  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : ftdi: Remove unnecessary cast Also make sure future growth of the tap_get_tms_path() return value
	will get noticed.  Change-Id: Id859b463e5fdc819a4bc3b4845bf4363fbe713af Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1768 Tested-by: jenkins Reviewed-by:
	Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-09-28  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : nand/mx*: Remove unused host endianness flag Probably shouldn't depend on that anyway.  Change-Id: Ic27ead4cb82cff1ab187696439da4b93941e09d8 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1766 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-09-30  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : Clean up const usage to avoid excessive casting Don't use const on pointers that hold heap allocated data, because
	that means functions that free them must cast away the const.  Do use const on pointer parameters or fields that needn't be
	modified.  Remove pointer casts that are no longer needed after fixing the
	constness.  Change-Id: I5d206f5019982fd1950bc6d6d07b6062dc24e886 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1668 Tested-by: jenkins Reviewed-by:
	Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-09-30  Paul Fertser <fercerpav@gmail.com>

	* : Clean up many C99 integer types format specifiers This eliminates most of the warnings reported when building for
	arm-none-eabi (newlib).  Hsiangkai, there're many similar warnings left in your nds32 files,
	I didn't have the nerve to clean them all, probably you could pick
	it up.  Change-Id: Id3bbe2ed2e3f1396290e55bea4c45068165a4810 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1674 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-10-26  Paul Fertser <fercerpav@gmail.com>

	* : checkpatch: treat jenkins as valid email This is needed to avoid checkpatch barking on already committed
	patches.  Change-Id: Ic2b4cfa04c8230d45c68bbf6b370841f682b32d6 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1785 Tested-by: jenkins Reviewed-by: Jens
	Bauer <jens@gpio.dk> Reviewed-by: Mathias Küster
	<kesmtp@freenet.de> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-09-26  James G. Smith <jsmith@ecoscentric.com>

	* : hla/stlink: Re-order trace parameters to allow trace output file
	to be optional Re-order the "trace" parameters to allow the raw capture (log) file
	to be an optional feature. The clock frequency for calculating the
	"Async Clock Prescalar" is always required when enabling trace
	processing and is now the first "required" parameter.  The ST-Link driver is updated to use the (required parameter)
	"trace_source_hz" non-zero value as the indicator of trace being
	required, rather than the now optional output file descriptor being
	non-NULL.  Background: This patch is groundwork for extending the OpenOCD SWO
	capture to implement other (OpenOCD built-in) ITM/DWT processing
	where the core trace support is required, but there is no
	requirement to store raw trace data to a configured host file. By
	itself this patch is almost a functional NOP, since without the
	other processing in place there is no reason NOT to specify a
	capture file.  Change-Id: Ibc385dd0a7adaf9bd652bceded27262fef35fd59 Signed-off-by:
	James G. Smith <jsmith@ecoscentric.com> Reviewed-on:
	http://openocd.zylin.com/1660 Tested-by: jenkins Reviewed-by:
	Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-06-22  Paul Fertser <fercerpav@gmail.com>

	* : tcl: add memory testing functions for board diagnostics This is a tcl implementation of public domain tests by Michael Barr,
	http://www.barrgroup.com/Embedded-Systems/How-To/Memory-Test-Suite-C The initial porting is done by Shane Volpe and posted to the mailing
	list:

	http://www.mail-archive.com/openocd-development@lists.berlios.de/msg16676.htmlThis patch includes some cosmetic amendments plus hardcodes 32bit
	word size (as the code depends on memread32/memwrite32 anyway) which
	fixes original code's issue of testing only the first quarter of the
	specified nBytes.  Change-Id: I5f3a66f1f16fc4082c7a5a6aba338430646ed21c Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1455 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Mathias Küster
	<kesmtp@freenet.de>

2013-10-18  Sergey A. Borshch <sb-sf@users.sourceforge.net>

	* : hla_interface: init trst, srst variables.    There is an remark in jtag_srst and jtag_trst variables
	  declaration: /*    * JTAG adapters must initialize with TRST and SRST de-asserted    * (they're negative logic, so that means *high*).  But some    * hardware doesn't necessarily work that way ... so set things    * up so that jtag_init() always forces that state.     */   but in hla_target such forsing is missed and both variables
	  remains uninitialized until "reset" command issued, It prevents
	  target polling when connecting to running target.  Change-Id: Ia620d8794cca8ba1403f5c5f24767e730033748a Signed-off-by:
	Sergey A. Borshch <sb-sf@users.sourceforge.net> Reviewed-on:
	http://openocd.zylin.com/1698 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Mathias Küster
	<kesmtp@freenet.de>

2013-10-09  Greg Ungerer <gerg@uclinux.org>

	* : armada370: initial support for Marvell Armada 370 family Initial support for using the jtag interface to the Marvell Armada
	370 family of SoCs.  Change-Id: Id823a567e8805ac622c3c330bc111297c1dae37e Signed-off-by:
	Greg Ungerer <gerg@uclinux.org> Reviewed-on:
	http://openocd.zylin.com/1690 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-10-12  Gatan Carlier <gcembed@gmail.com>

	* : flash: mxc nfc(v1) : fix incorrect address in spare area for
	biswap command For NFC v1 (i.MX27), swapping must be done between offset 464 of
	Main buffer and offset 4 of Spare buffer.  Change-Id: I09c2036e88770032da87d5846cd2094847f47b46 Signed-off-by:
	Gaetan Carlier <gcembed@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1692 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-10-05  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : lpc288x: Can now use target_write_buffer() Use the preferred code path according to the comment.
	Target_write_buffer() now simply uses suitably aligned
	target_write_memory calls, so from this pov, they should be
	equivalent.  Change-Id: I77f51ec3ac9faa822cf428708a1aecb67c77830c Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1687 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-10-07  Sergey A. Borshch <sb-sf@users.sourceforge.net>

	* :     hla_target: Update target state when polling     Polling target does not change stste information     except if new state is TARGET_HALTED.      Connecting to the runing target result in target->state     not updated with retrieved value and remains "UNKNOWN"     until 'halt' command issued.  Change-Id: I803d6c0207f7f8699e648779d1df342c9ee7315a Signed-off-by:
	Sergey A. Borshch <sb-sf@users.sourceforge.net> Reviewed-on:
	http://openocd.zylin.com/1680 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-10-13  Franck Jullien <franck.jullien@gmail.com>

	* : openrisc/tap_vjtag: fix IR setting Change-Id: I2b1f057dc9777ff263d6cefa4ff5958e85607a22 Signed-off-by:
	Franck Jullien <franck.jullien@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1694 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-10-14  Paul Fertser <fercerpav@gmail.com>

	* : checkpatch: add logging functions It's commonly considered that user-visible strings should not be
	split to different lines in the sources to ease grepping for them.
	Hence, checkpatch traditionally makes an exception for logging
	functions, lines having them can be of arbitrary length.  OpenOCD uses different (from Linux, the kernel) names, so they need
	to be added to avoid false positives.  Change-Id: I1198c1ffc62b5403d97efa41e665c81a5b6bb3a3 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1696 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-10-03  Franck Jullien <franck.jullien@gmail.com>

	* : jtag_vpi: fix path move function Change-Id: I82bf6f733e0d9cb5c86553d0827c558fa98aa247 Signed-off-by:
	Franck Jullien <franck.jullien@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1672 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2013-09-18  Paul Fertser <fercerpav@gmail.com>

	* : bcm2835gpio: use maximum drive strength According to the docs, the default drive strength for the GPIO pads
	is 8mA but they're capable of 16mA. Configure GPIO 0-27 to use the
	maximum (as they might be used on high enough frequency with JTAG).  Change-Id: I621737a1b0a855bb97b56ce2cc46c0e385b74f5d Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1633 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-10-07  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : str7x: Improve info text There's no way to print two lines, so let it wrap.  Change-Id: I1f6211358a58877c0b729d9fdefd5d3dea8cba00 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1643 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-09-19  Spencer Oliver <spen@spen-soft.co.uk>

	* : stm32l: set default padded value The stm32l family has an erased value of 0x00, so overide the
	defaults used by OpenOCD.  Change-Id: I314bdef1f8482fbcbd43e0f413247d3a35af869d Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1636 Tested-by: jenkins

2013-10-02  John David Anglin <dave.anglin@bell.net>

	* : flash: fix mini51 cygwin build issues Under certain versions of cygwin it appears PAGE_SIZE is already
	defined.  So change name to stop any possible build issues.  Change-Id: I6f0e0c352c06bb6118ac3a5b884ae8e93194b570 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1675 Tested-by: jenkins

2013-10-05  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : stm32f2x: Detect STM32F42x rev Y Change-Id: Iaf94f6dda0686cce56be77431bbb961bfd5e8d14 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1688 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-09-28  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : jtag/tcl: Remove no-op free And use calloc instead of malloc+memset.  Change-Id: Icc1ed6e34904972bb5d3728307dcae5c55b32fc3 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1666 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-09-22  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : gdb_server: Further cleanup of target desc functions Fix use of uninitialized pointer passed to xml_printf, caught by
	valgrind.  Make sure a failed gdb_generate_target_description frees all
	allocated memory and avoids touching its out argument.  Plug memory leak and check allocation in
	handle_gdb_save_tdesc_command.  Change-Id: I30e20f6760a6215b1b4496304acdf47347eed829 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1645 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Franck Jullien
	<franck.jullien@gmail.com>

2013-09-22  Paul Fertser <fercerpav@gmail.com>

	* : board: add TM4C123G LaunchPad config Almost the same as the LM4F120 LaunchPad but the chip is using the
	new naming scheme (Tiva C series), supports USB OTG and has some new
	PWM hardware blocks.  Change-Id: I6a7b2df76768766471f366cddaf64df3cc63f5f2 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1647 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-09-25  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : cortex_m: Call mem_ap_read/write directly Change-Id: I52e1d8babf7bf9fcde4094046d29b817c15c0562 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1659 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-09-25  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : cortex_m: mem_ap access functions take number of bytes, not
	words Accessing one byte of memory using a 16-bit access is not well
	defined.  The current implementation is forgiving and rounds up, but
	it should not be relied upon.  Also, I suspect this code might fail if the byte order differs
	between target and host, but I have no way of verifying it so I left
	it as it is.  Change-Id: I8d6a511151a194ed419f141703201f0632d84fc8 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1657 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-09-22  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : arm_adi_v5: Fix packed and unaligned memory writes For packed and/or unaligned accesses, the write functions reordered
	the source buffer in place. Causing in the best case a segfault, in
	the worst case silent data corruption.  Rewrite the data fetching to directly match the byte lane mapping
	according to IHI0031C, without destroying the buffer.  Also slightly clean up variable usage and harmonize all the write
	functions.  Change-Id: I9a01cfc5578653f9ec02043ff6b61a7a20f90d67 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1646 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-09-23  Paul Fertser <fercerpav@gmail.com>

	* : Require Autoconf >= 2.64 m4_argn macro was introduced in v2.63b-34-g46e87de on the 22nd of
	Apr 2009.  Change-Id: Id01cc9f0ffdb46cf6dfd26c3bf3b5efa0ddd2984 Reported-by:
	Franck Jullien <franck.jullien@gmail.com> Signed-off-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1656 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-09-20  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : target: Fix strange ordering in target_read_u8 It's been like this since the check was added, in 5aa93a5e.  Change-Id: Iaa0586e0cd1ce57ad92735dcc3e51108a133fe96 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1640 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-09-19  Spencer Oliver <spen@spen-soft.co.uk>

	* : doc: correctly terminate @xref @xref should be terminated by either a ',' or '.'.  Change-Id: I141335cd4e149992fc971c6f2c04f1dbe390c8f4 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1637 Tested-by: jenkins Reviewed-by:
	Xiaofan <xiaofanc@gmail.com>

2013-09-14  Petri Laakso <petri.laakso@asd.fi>

	* : build: fix NetBSD build warning Seems NetBSD does like the name reboot, so rename to keep happy.  Change-Id: I60ada9d217c4a8386a8d1ff1c88db7335451794e Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1623 Tested-by: jenkins Reviewed-by:
	Xiaofan <xiaofanc@gmail.com>

2013-09-18  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: remove usb timeout magic numbers Change-Id: I4ec4cb0bc344c4c1de9113fa12ed84e5e2e87b31 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1631 Tested-by: jenkins Reviewed-by:
	Xiaofan <xiaofanc@gmail.com> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2013-09-19  Paul Fertser <fercerpav@gmail.com>

	* : README.Windows: MinGW-w64 is known to work for building, regular
	MinGW is quirky The regular MinGW doesn't work properly because it doesn't try to
	provide C99 compatibility currently.  Change-Id: I27c1b9e1496a8c32032fab08a29cbe1124316edd Reported-by:
	Tomáš Voda <Voda.Tomas@seznam.cz> Signed-off-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1638
	Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
	Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

2013-09-12  Spencer Oliver <spen@spen-soft.co.uk>

	* : gdb: cleanup gdb target description support Make sure we free any memory used for gdb_save_tdesc.  Change-Id: Ia226f6134318c8c6b0ac4fa20fe70a570a08d80d Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1619 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2013-09-11  Spencer Oliver <spen@spen-soft.co.uk>

	* : armv7m: remove gdb register hacks Now that we support the target description format we do not need
	these hacks anymore, we can now tell gdb what registers we support.  Change-Id: Ie774231d296420b35efcf708bc4435475c87ff5e Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1617 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2013-09-17  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : Restore mwh/mwb functionality.  Half-word and byte writes using mwh/mwb has been completely broken
	since bf71e34cbf, because it dispatched all writes, regardless of
	access size, to target_write_buffer(), which uses as large accesses
	as possible.  Partially revert the commit by changing back to the correct write
	method.  Change-Id: I60731fc576bf4a076a7da02bee7879e121c21d17 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1628 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-09-18  Paul Fertser <fercerpav@gmail.com>

	* : README.Windows: pkgconfig-lite should go into MinGW, not MSYS As autoconf is part of MinGW, it uses its root to find m4 files,
	pkg-config should be installed accordingly.  Change-Id: I551797e61a3d044f751768bd7d57d8e26e7202cc Reported-by:
	Tomáš Voda <Voda.Tomas@seznam.cz> Signed-off-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1630
	Tested-by: jenkins Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-09-06  Stephan Linz <linz@li-pro.net>

	* : configure: expand library search for libftd2xx Error was: checking for library containing FT_GetLibraryVersion...
	no configure: error: You appear to be missing the FTD2xx driver
	library.  Reason were two cases: Case one: The FTD2xx library uses clock_gettime() and in normal
	cases the linker will find the function in the libc library. Most (older) systems require the program be linked with the librt library
	to use these (see man clock_gettime: Link with -lrt).  Case two: You can rebuild the FTD2xx library (relink from the object
	files) against the primary (system wide installed) libusb-1.0.  So
	you avoid mixed code (GPL with proprietary code) in the FTD2xx
	library. In this case, the FTD2xx library provides no private
	(linked in) libusb-1.0 functionality and require the program be
	linked with the libftd2xx __AND__ the libusb-1.0 to resolve all the
	libusb-1.0 symbols.  Change-Id: Iaf9a35ab4257e37b98dccd47667378ad2a64b7ed Signed-off-by:
	Stephan Linz <linz@li-pro.net> Reviewed-on:
	http://openocd.zylin.com/1614 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by:
	Xiaofan <xiaofanc@gmail.com>

2013-08-01  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : configure: Add libusb-1.0 header bug workaround Force the libusb-1.0 include dir to be treated as a system include
	path which suppresses the cast-align warnings otherwise failing the
	build on some platforms.  Change-Id: I738cfd793052b8772731d2feeef968ee893bd4bd Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1534 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-09-11  Paul Fertser <fercerpav@gmail.com>

	* : libusb: require pkg-config support An alternative approach to show how much cleaner the pure pkg-config
	way is.  This changes the discovery procedures for libusb-1.0 and libusb-0.1,
	making them depend on pkg-config being properly installed and
	configured, including the necessary build host configuration for the
	cross-builds (see

	http://www.flameeyes.eu/autotools-mythbuster/pkgconfig/cross-compiling.html)It should make it possible to compile OpenOCD without changes and
	extra effort on GNU/Linux, FreeBSD users would need to supply a .pc
	file for their libusb implementation or add LIBUSB1_LIBS and
	LIBUSB1_CFLAGS to the configure environment.  Change-Id: I826e378dd1e0d101a549a573b2c63212a7e00b64 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Signed-off-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1467 Reviewed-by: Xiaofan
	<xiaofanc@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk> Tested-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-07-16  Nemui Trinomius <nemuisan_kawausogasuki@live.jp>

	* : flash: add Nuvoton NUC910 series support Not tested, adapted from
	http://tech.groups.yahoo.com/group/versaloon/message/391 Change-Id: Ic3273e64fd99bffab16764b06227e09a05d07c8f Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1510 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Nemui
	Trinomius <nemuisan_kawausogasuki@live.jp>

2013-07-11  Hsiangkai Wang <hsiangkai@gmail.com>

	* : aice: add target name to nds command messages Change-Id: Ie6c786c6880fb554af54ed27f1c159326f60a701 Signed-off-by:
	Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1583 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-07-11  Hsiangkai Wang <hsiangkai@gmail.com>

	* : nds32: Use DMA to access memory as no DCache As GDB uses file-I/O protocol to access memory, use DMA to access if
	no DCache.  This commit improves the performance of Andes Virtual
	Hosting.  Change-Id: I36bb2154b9f497fc4237625836cf8c7115330a60 Signed-off-by:
	Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1580 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-06-10  Hsiangkai Wang <hsiangkai@gmail.com>

	* : nds32: support FreeRTOS Change-Id: I117b5541fb19388c0f5c2344ee42d9151c9a222e Signed-off-by:
	Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1577 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-06-10  Hsiangkai Wang <hsiangkai@gmail.com>

	* : nds32: change default value Change-Id: I0505bdc0e75543a3b205981339c5b9fa78a080ca Signed-off-by:
	Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1575 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-08-27  Hsiangkai Wang <hsiangkai@gmail.com>

	* : nds32: support Andes profiling function Change-Id: Ibc45ec5777d6841956c02de6b4ae8e74c2a6de37 Signed-off-by:
	Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1585 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-06-26  Hsiangkai Wang <hsiangkai@gmail.com>

	* : target: add profiling interface Profiling could be target-specific.  Add .profiling interface to
	target_type.  Change-Id: Ic0eea9db742971db1350a474fbbb5ed24565922b Signed-off-by:
	Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1571 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-08-30  Hsiangkai Wang <hsiangkai@gmail.com>

	* : target: Correct profiling calculation 1. high_pc should be (maximum sample + 1) (Refer to gprof source
	code) 2. bucket index should be      sample offset     --------------- x (number of bucket) 	 sample range For example, if minimum sample is 0 and maximum sample is 5 and the
	number of bucket is 3.  a = sampled_address - 0 b = 3 c = 6 (a, b, c refer to source code variables) sampled_address = 0, => a = 0, => bucket_index = 0 sampled_address =
	1, => a = 1, => bucket_index = 0 sampled_address = 2, => a = 2, =>
	bucket_index = 1 sampled_address = 3, => a = 3, => bucket_index = 1
	sampled_address = 4, => a = 4, => bucket_index = 2 sampled_address =
	5, => a = 5, => bucket_index = 2 Change-Id: Ia9fa0e4d9c7183e3e9d7ceaf73e63729f07aa2ce Signed-off-by:
	Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1607 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-07-17  Hsiangkai Wang <hsiangkai@gmail.com>

	* : nds32: refine nds32_v2 implement Change-Id: I6e26ffbdcd426a15b34bff022964946f613f318c Signed-off-by:
	Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1569 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-06-13  Hsiangkai Wang <hsiangkai@gmail.com>

	* : aice: Always setup SDP basic mode Change-Id: I1c0c11c2b9097b25324da0591edf036af207dbe9 Signed-off-by:
	Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1567 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-08-27  Anton Kolesov <akolesov@synopsys.com>

	* : gdb_server: Do not set gdb_con->sync to true for new connections In GDB connected to OpenOCD there is a command "monitor gdb_sync"
	which makes next stepi command to be ignored while GDB still will
	get an updated target state. This command sets gdb_connection->sync
	field to true to notify that stepi should be ignored. This field is
	set to true for all new connection and is set to false after first
	"continue" command. However if first resume command is stepi/nexti
	then it will be ignored and result will confuse GDB client, it will
	report that target received signal SIGINT. This patch sets this
	field to false for new connections, thus stepi/nexti will work
	properly when it is a first resume command.  Change-Id: I7c9ebd69c3dc35f3e316041aa99f4e9d3425c0b6 Signed-off-by:
	Anton Kolesov <akolesov@synopsys.com> Reviewed-on:
	http://openocd.zylin.com/1587 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2013-03-13  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : target: Rewrite read/write buffer default implementations Rewrite the target_*_buffer_default to generate as large accesses as
	possible while maintaining natural alignment.  These versions are easy to extend to generate 8-byte accesses to
	support 64-bit targets, although it requires some conformity from
	all target implementations (i.e. they need to refuse unsupported
	access sizes with some defined error code, so we can try again with
	a smaller one).  Change-Id: I00ddcbb1d2fd33f9f8b99cb448cc93505a2421fc Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1221 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-09-10  Paul Fertser <fercerpav@gmail.com>

	* : sysfsgpio: fix a typo in the informational output Change-Id: I0c9bc281e4e913f9eacba3b8b60585217a1caf2e Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1616 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2013-09-05  Spencer Oliver <spen@spen-soft.co.uk>

	* : build: remove clang warning about global var 'match' remove clang warning - "Argument to free() is the address of a
	global variable, which is not memory allocated by malloc()".  Change-Id: I015273eafc9644207684b363434c6ae8149bfcde Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1613 Tested-by: jenkins

2013-07-16  Nemui Trinomius <nemuisan_kawausogasuki@live.jp>

	* : flash: add NXP LPC800 support Not tested, adapted from
	http://tech.groups.yahoo.com/group/versaloon/message/391 Change-Id: I142fa6f29e66fd334baca14217aca97e1fc6c7d9 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1509 Tested-by: jenkins

2013-08-02  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: remove unimplemented target_request_data implementations Change-Id: Ia9afa83752d17f0f56bdf3bd81f5c69d108aa5e9 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1537 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2013-08-02  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: remove unimplemented soft_reset_halt implementations Let the default handler issue an unsupported warning rather than
	using empty handler routines that may/may not issue a unsupported
	warning.  Change-Id: Iafe3e45146981a4cfae39771c3ab7370ac86da48 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1535 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by:
	Hsiangkai Wang <hsiangkai@gmail.com>

2013-08-09  Cosmin Gorgovan <cosmin@linux-geek.org>

	* : mini51: support for Nuvoton NuMicro Mini51 series flash memory Adds a flash driver for Nuvoton MINI51, MINI52 and MINI54
	microcontrollers.  At the moment, it only supports the erase and write operations.  These microcontrollers have a 4 / 8 / 16 KB APROM for application
	code and a 2 KB LDROM for bootloaders. When the MCU has booted off
	the APROM, the LDROM isn't mapped in memory but can be programmed,
	and the other way around.  This means that the ARM core is typically
	rebooted for programming. After a successful write or erase
	operation, it is rebooted again, using the initial boot source.  This driver only supports programming the APROM.  This driver is a pure JTAG implementation, it doesn't use any SRAM.  I've tested it on a MINI54ZAN microcontroller using an ST-LINK/V2.
	With the microcontroller running at the default clock frequency of
	22.1184 MHz, speed seems to be around 1.1 KB/s.  Change-Id: I180889c55af9fb5614cd99a953b755baba14288a Signed-off-by:
	Cosmin Gorgovan <cosmin@linux-geek.org> Reviewed-on:
	http://openocd.zylin.com/1546 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-09-06  Franck Jullien <franck.jullien@gmail.com>

	* : jtag: drivers: Add JTAP VPI client driver This patch adds a driver for the jtag_vpi server [1]. This server is
	now part of the ORPSoC version 3 (OpenRISC Reference Platform SoC).
	The jtag_vpi server provides an interface between OpenOCD and a
	simulated core.  [1] http://github.com/fjullien/jtag_vpi Change-Id: I717b72cace4845f66c878581345074f99002e21a Signed-off-by:
	Franck Jullien <franck.jullien@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1609 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-08-05  Spencer Oliver <spen@spen-soft.co.uk>

	* : docs: add RTOS Support info Currently we have very little info about the RTOS support. This
	should improve that.  We also add info about what symbols are required for each supported
	RTOS.  This can be a trap, certainly when trying to use FreeRTOS
	support.  Change-Id: Ie57858571daca97515292ff5738a5a5ef55655b7 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1538 Tested-by: jenkins

2013-08-06  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: fix stm32f1x dual bank detection Not all devices with devce id 0x419 have dual flash banks, only
	those with > 1024kB.  Change-Id: I197d2b87df7599cd0837e25648af48439f2f1e50 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1544 Tested-by: jenkins

2013-08-28  Hsiangkai Wang <hsiangkai@gmail.com>

	* : target: Remove error messages as no .get_gdb_fileio_info If target does not support semi-hosting function, it has no need to
	provide .get_gdb_fileio_info callback. OpenOCD will use default
	function target_get_gdb_fileio_info_default.  The default function
	just return ERROR_FAIL and gdb_server will treat every halted
	condition as normal halted and return "Txx" to gdb.  Change-Id: I9ddb2be3a1145eae2ef5b712bdea89eb2e0fbc20 Signed-off-by:
	Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1586 Tested-by: jenkins Reviewed-by: Nemui
	Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2013-08-20  Andrey Yurovsky <yurovsky@gmail.com>

	* : stlink_usb: remove gcc-specific constant Replace 0b10 with 0x02, 0b is a GCC extension and isn't supported by
	clang, for instance, so compiling on OS X will fail.  No functional
	changes.  Change-Id: Ie882be1563df03e7ad3da0bc9aee65a907a29549 Signed-off-by:
	Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1560 Tested-by: jenkins Reviewed-by:
	Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-08-15  Franck Jullien <franck.jullien@gmail.com>

	* : doc: Add gdb target description commands Change-Id: Ie74917082e894cfa8ee2258f7a8cdf7d58ee4a59 Signed-off-by:
	Franck Jullien <franck.jullien@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1552 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-08-13  Paul Fertser <fercerpav@gmail.com>

	* : interface/ftdi/tumpa: remove ftdi_device_desc as it's incorrect The end users on IRC report that actual USB device has different
	information in its descriptor so it doesn't match. Remove it
	altogether.  Change-Id: Id7841667390a514581e630e67b9283675803135b Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1548 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-07-22  Andrey Yurovsky <yurovsky@gmail.com>

	* : stm32lx flash: fix flash size for Medium+ devices Unfortunately the Medium+ density and 0x436 devices have their
	F_SIZE register at a different location: 0x1FF800CC instead of
	0x1FF8004C.  Fix this for the 0x427 Medium+ devices and also the
	0x436 devices.  Furthermore, for 0x436 devices the flash size is
	reported as a 0 or 1 code rather than the size in Kb.  Please see
	RM0038 r8 or newer for an explanation, as noted in the comments.  Change-Id: Ie03b1e119a61f2a854bc2ccc5f90ce3e8852e272 Signed-off-by:
	Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1522 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2013-08-06  Spencer Oliver <spen@spen-soft.co.uk>

	* : docs: remove mixed case typo Change-Id: Iae40c59ed21e72931d440814d112b3cd752aad9c Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1540 Tested-by: jenkins

2013-07-29  Paul Fertser <fercerpav@gmail.com>

	* : mdr32fx: support for Milandr's MDR32Fx internal flash memory This adds example config and flash driver for russian Cortex-M3
	microcontroller model.  Run-time tested on MDR32F9Q2I evaluation board; the flash driver
	should be compatible with MDR32F2x (Cortex-M0) too but I lack
	hardware to test.  There're no status bits at all, the datasheets specifies some delays
	for flash operations instead. All being in <100us range, they're
	hard to violate with JTAG, I hope. There're also no flash
	identification registers so the flash size and type has to be
	hardcoded into the config.  The flashing is considerably complicated because the flash is split
	into pages, and each page consists of 4 interleaved non-consecutive
	"sectors" (on MDR32F9 only, MDR32F2 is single-sectored), so the
	fastest way is to latch the page and sector address and then write
	only the part that should go into the current page and current
	sector.  Performance testing results with adapter_khz 1000 and the chip
	running on its default HSI 8MHz oscillator: When working area is specified, a target helper algorithm is used:
	wrote 131072 bytes from file testfile.bin in 3.698427s (34.609
	KiB/s) This can theoretically be sped up by ~1.4 times if the helper
	algorithm is fed some kind of "loader instructions stream" to allow
	sector-by-sector writing.  Pure JTAG implementation (when target memory area is not available)
	flashes all the 128k memory in 49.5s.  Flashing "info" memory region is also implemented, but due to the
	overlapping memory addresses (resulting in incorrect memory map
	calculations for GDB) it can't be used at the same time, so OpenOCD
	needs to be started this way: -c "set IMEMORY true" -f
	target/mdr32f9q2i.cfg It also can't be read/verified because it's not memory-mapped
	anywhere ever, and OpenOCD NOR framework doesn't really allow to
	provide a custom handler that would be used when verifying.  Change-Id: I80c0632da686d49856fdbf9e05d908846dd44316 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1532 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-07-11  Hsiangkai Wang <hsiangkai@gmail.com>

	* : gdb_server: check target before executing event callback As debugging multi-targets, every target has its own gdb connection.
	If there are two connections, gdb_target_callback_event_handler will
	be registered twice.  Everytime event occurs, the registered
	callback will be executed twice.  If both targets are running, as
	user issues ctrl-c in one gdb client, both connections will send
	"stop reply" to GDB clients even TARGET_EVENT_GDB_HALT is caused by
	one of them.  The commit fix above problem as debugging multi-targets.  Change-Id: I1e12d4846927d7dcf1e3bb9aeb1affabc80df813 Signed-off-by:
	Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1501 Tested-by: jenkins Reviewed-by: Sergey
	Borshch <sb-sf@users.sourceforge.net> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-01-02  Hsiangkai Wang <hsiangkai@gmail.com>

	* : gdb_server: support File-I/O Remote Protocol Extension The File I/O remote protocol extension allows the target to use the
	host's file system and console I/O to perform various system calls.  To use the function, targets need to prepare two callback functions: * get_gdb_finish_info: to get file I/O parameters from target * gdb_fileio_end: pass file I/O response to target As target is halted, gdb_server will try to get file-I/O information
	from target through target_get_gdb_fileio_info(). If the callback
	function returns ERROR_OK, gdb_server will initiate a file-I/O
	request to gdb.  After gdb finishes system call, gdb will pass
	response of the system call to target through
	target_gdb_fileio_end() and continue to run(continue or step).  To implement the function, I add a new data structure in struct
	target, called struct gdb_fileio_info, to record file I/O name and
	parameters.  Details refer to GDB manual "File-I/O Remote Protocol Extension" Change-Id: I7f4d45e7c9e967b6d898dc79ba01d86bc46315d3 Signed-off-by:
	Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1102 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-05-07  Hsiangkai Wang <hsiangkai@gmail.com>

	* : gdb_server: support gdb target description * Add a parameter in .get_gdb_reg_list() to return different   register lists as generating target description.  * Modify STRUCT REG to let gdb generate target description   according to register information.  The modified structure of register is struct reg {         const char *name;         uint32_t number;  /* for regnum="num" */         struct reg_feature *feature;  /* for register group feature
	        name */ bool caller_save;  /* for save-restore="yes|no" */         void *value;         bool dirty;         bool valid;         bool exist;         uint32_t size;         struct reg_data_type *reg_data_type;  /* for type="type" */         const char *group;  /* for group="general|float|vector" */         void *arch_info;         const struct reg_arch_type *type; }; Change-Id: I2096b67adf94518ba0b8b23d8c6a9f64ad7932b8 Signed-off-by:
	Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1382 Tested-by: jenkins Reviewed-by: Franck
	Jullien <franck.jullien@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2013-07-16  Nemui Trinomius <nemuisan_kawausogasuki@live.jp>

	* : flash: add Winbond w25q80bv spi support Not tested, adapted from
	http://tech.groups.yahoo.com/group/versaloon/message/391 Change-Id: Ibe87c617b3cdf70ee042112609ab46bea98a3e6d Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1511 Tested-by: jenkins Reviewed-by: Nemui
	Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2013-07-10  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : mpsse: Add missing read buffer checks These two unused functions added reads without checking for
	available space.  Change-Id: I17dbbe9988b057e5a3a1768f405fc9d1027d1c01 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1500 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-07-25  Spencer Oliver <spen@spen-soft.co.uk>

	* : docs: add missing embKernel rtos arg to docs Change-Id: Ib304a2bf272d281f6cd124ffca95b32531d57899 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1529 Tested-by: jenkins Reviewed-by:
	Xiaofan <xiaofanc@gmail.com>

2013-07-25  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : Fix out-of-tree build The current AX_CONFIG_SUBDIR_OPTION macro assumes that $srcdir is a
	relative path. If it is not, jimtcl/configure.gnu is generated such
	that an out-of-tree build will fail at the configure step unless the
	build dir is a sibling to the source dir.  Change the generated jimtcl/configure.gnu wrapper to use the same
	`dirname $0` trick as jimtcl/configure (which itself is a wrapper
	around autosetup).  Change-Id: I0fb19ae114ba37169b422b28313262f9bd83eb6f Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1528 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Xiaofan
	<xiaofanc@gmail.com>

2013-07-23  Paul Fertser <fercerpav@gmail.com>

	* : lpcspifi: assume flash is unprotected after probing Since the driver doesn't support any hardware flash protection, it
	doesn't make sense to report "protected" status after probing, as it
	requires extra commands to unprotect before flashing and might be
	confusing for the end-users.  Change-Id: I04d96790cc42412df5334951f39fb6723c972ced Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1525 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-07-17  Spencer Oliver <spen@spen-soft.co.uk>

	* : rtos: issue warning on auto detect failure Currently if we fail to auto detect an rtos then no warning is
	given.  This can also be triggered if we only find some of the rtos
	symbols.  Change-Id: I215991bbce0909bc6af93560b0f55db13defd123 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1514 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2013-07-16  Paul Fertser <fercerpav@gmail.com>

	* : target: fix halt and wait_halt timeout units Documentation says they should be given values in milliseconds,
	DEFAULT_HALT_TIMEOUT matches that too.  Change-Id: Ic1a30fa90f75b412c43fe50ba187d01c3d0a5fba Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1504 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-04-15  Oleksij Rempel <bug-track@fisher-privat.net>

	* : mips: add breakpoint support for EJTAG 2.0 EJTAG 1.5, 2.0 and 2.5 have different breakpoint register addresses.
	This patch add support of EJTAG 2.0, which is part some broadcom
	SoCs.  This work was testet on Broadcom BCM7401.  Change-Id: I4b0ee23871fa9205f9001b7c9165e7b6ebe9ccbf Signed-off-by:
	Oleksij Rempel <linux@rempel-privat.de> Reviewed-on:
	http://openocd.zylin.com/1464 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-04-20  Oleksij Rempel <bug-track@fisher-privat.net>

	* : mips32_pracc: jump to 0xff20.0200 if cpu reads wrong addr On some CPUs, like bcm7401 with EJTAG v2.0 we can have situation
	where CPU do not stops execution. For example, all CP0 commands will
	have this issue.  In this case we should some hove recover our
	session. Currently jump to 0xff20.0200 seems to be good option. If
	it brake some thing on newer EJTAG, then check for EJTAG v2.0 should
	be added.  Change-Id: Icd8841f38a1a85e0f7682b6dc358af8dfaae0744 Signed-off-by:
	Oleksij Rempel <bug-track@fisher-privat.net> Reviewed-on:
	http://openocd.zylin.com/1353 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-04-18  Oleksij Rempel <bug-track@fisher-privat.net>

	* : do not wait forever on ejtag_dma_dstrt_poll Change-Id: I26adab09839795ecf363b7db912392bd5314cec5 Signed-off-by:
	Oleksij Rempel <bug-track@fisher-privat.net> Reviewed-on:
	http://openocd.zylin.com/1344 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-04-15  Oleksij Rempel <bug-track@fisher-privat.net>

	* : mips_ejtag: remove memory protection bit before DM Change-Id: Id1564ae063cea4f056b350436d52df5381ca9608 Signed-off-by:
	Oleksij Rempel <bug-track@fisher-privat.net> Reviewed-on:
	http://openocd.zylin.com/1341 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-07-07  Martin Schmlzer <martin.schmoelzer@student.tuwien.ac.at>

	* : OpenULINK firmware: update firmware hex image This image has been re-compiled with SDCC 3.3.0 and achieves
	slightly better performance (50-100 Byte/s for STM32F103 flash
	write) due to new/improved compiler optimizations.  Successfully tested with ULINK probe and STM32F103 (debug, erase and
	write flash).  Change-Id: I4329aa42f50461fa3719fd63d0054d8e86982727 Signed-off-by:
	Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
	Reviewed-on: http://openocd.zylin.com/1486 Tested-by: jenkins
	Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

2013-07-04  Martin Schmlzer <martin.schmoelzer@student.tuwien.ac.at>

	* : OpenULINK firmware: Use C99 designated struct initializers Recent versions of SDCC added support for C99 designated struct
	initializers.  This provides better code readability (no functional
	changes).  Successfully tested with ULINK probe and STM32F103 (debug, erase and
	write flash).  Change-Id: Idfa35147d2c3043baaa21a811b926b3845c85f9b Signed-off-by:
	Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
	Reviewed-on: http://openocd.zylin.com/1484 Tested-by: jenkins
	Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

2013-07-04  Martin Schmlzer <martin.schmoelzer@student.tuwien.ac.at>

	* : OpenULINK firmware: fix name of USB Jump Table symbol Fix a case mistake in the name of the USB Jump Table
	("USB_jump_table" vs. "USB_Jump_Table") which led to an assembler
	error when attempting to build the firmware with recent SDCC
	versions, because the assembler now treats symbol names as
	case-sensitive.  Successfully tested with ULINK probe and STM32F103 (debug, erase and
	write flash).  Change-Id: I979667b9130efcdccc3ac73269c38f06e0590048 Signed-off-by:
	Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
	Reviewed-on: http://openocd.zylin.com/1482 Tested-by: jenkins
	Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

2013-06-28  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: use consistent halt timeout On slow targets we sometimes get false messages about timeouts due
	to poll using 1sec rather than the default 5sec timeout.  Change-Id: Icc81c78e0ca86cebf9eeb2f5307cf7a82f1f4ee8 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1466 Tested-by: jenkins

2013-06-24  Robert Jarzmik <robert.jarzmik@free.fr>

	* : jtag/drivers: trivial variable renaming Rename ublast_sleep() time variable from ms to us as the unit is in
	micro-seconds.  Change-Id: I07ff9c36d302d5d59edb8a5faa73d78cdd6145a4 Signed-off-by:
	Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-on:
	http://openocd.zylin.com/1457 Tested-by: jenkins Reviewed-by:
	Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-07-07  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : automake: Don't install libopenocd Regular users (and probably no-one else either) have no use for this
	library that is installed by default.  Change-Id: Ie94e1550cec33f26ef9b68e7ce4f46494f18e644 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1479 Tested-by: jenkins Reviewed-by:
	Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-06-28  Marek Vasut <marek.vasut@gmail.com>

	* : ftdi/board: Add support for DENX M53EVK Add support for DENX M53EVK board and it's integrated on-board JTAG
	adapter using FT2232H.  Change-Id: I022dcafa7799bb84a7873ba67ed82f1e49094320 Signed-off-by:
	Marek Vasut <marek.vasut@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1461 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2013-07-10  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : ftdi: Fix error in calloc retval check Found by clang.  Change-Id: Iaa952b063779f4d392d8bdc62a3e7ce9daef2740 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1498 Tested-by: jenkins Reviewed-by: Laszlo
	Papp <lpapp@kde.org> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-07-09  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : flash/stm32*: Rewrite info functions Factor out common bit masking and printing code and use intermediate
	strings to avoid buffer size handling.  Change-Id: I7d8c12df11ade6cdca8c917b5524372daa498bf4 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1496 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-07-08  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: add missing stm32l medium+ device id The device was correctly used in stm32lx_probe but missing from
	stm32lx_get_info.  Change-Id: If288b8df3210a945e727e4e27cfbdb948db32fc7 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1491 Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Tested-by: jenkins

2013-07-08  Paul Fertser <fercerpav@gmail.com>

	* : target: remove double const specificator Double const is bogus and breaks the build on Clang 3.3.  Change-Id: I9f9394d17f66289ac74ae6dd48f3165483b72e9e Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1489 Reviewed-by: Laszlo Papp
	<lpapp@kde.org> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
	Tested-by: jenkins

2013-07-06  Paul Fertser <fercerpav@gmail.com>

	* : aice: fix FTBFS on ARM This fixes a bunch of errors like this: aice_usb.c: In function
	'aice_pack_htdc': aice_usb.c:63:4: error: cast increases required
	alignment of target type [-Werror=cast-align] Compile-tested only.  I think this can be seen as another justification for an ARM Jenkins
	build target.  Also, the aice code I've seen so far seems to be assuming it runs on
	a little-endian machine so probably there're some endianness issues
	hiding. Hsiangkai, please get an old PowerPC Mac (or at least some
	fast usb-equipped MIPS SOHO WiFi AP/router for which you can
	cross-compile OpenOCD with OpenWrt) and do some real-life testing
	for your code on Big-Endian. I propose it to be a requirement for
	any non-trivial code submitted by a commercial entity of reasonable
	size.  Change-Id: I45e05257687d0020d7172b26a8666ebc1950e00c Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1477 Tested-by: jenkins Reviewed-by:
	Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-07-09  Laszlo Papp <lpapp@kde.org>

	* : ftdi/xds100v2.cfg: Remove the warning as it has been tested Change-Id: I3a8711867e247bc49caa79274ae882f07719d4ce Signed-off-by:
	Laszlo Papp <lpapp@kde.org> Reviewed-on:
	http://openocd.zylin.com/1492 Reviewed-by: Peter Stuge
	<peter@stuge.se> Tested-by: jenkins Reviewed-by: Paul Fertser
	<fercerpav@gmail.com>

2013-07-07  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : usb_blaster: maintainer-clean Makefile.in Change-Id: I120fc13a353c63e12d89698869b30c8e751db074 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1480 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-06-21  Spencer Oliver <spen@spen-soft.co.uk>

	* : doxygen: use inline jtag state maching image The currently used image is 404 so use an inline image instead.  Change-Id: I56a0d187fd06dc2c5c370e6532d89815ccec63d6 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1451 Tested-by: jenkins

2013-06-23  Robert Jarzmik <robert.jarzmik@free.fr>

	* : target: xscale more human vector catching Replace hexadecimal masks for vector catching with words
	representing the caught exception, such as dabt for data abort, etc
	...  This way, the new xscale command is :  - xscale vector_catch    Reads back to the user the current vector catching status  - xscale vector_catch reset dabt pabt    Sets the caught vectors to data abort and prefetch abort    for example.  This is mostly taken from Cortex-M3 openocd code.  Change-Id: I66591d5796f0e07f0f31edc8d28722e1e48aa8c5 Signed-off-by:
	Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-on:
	http://openocd.zylin.com/1456 Tested-by: jenkins Reviewed-by: Marek
	Vasut <marek.vasut@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-05-27  Ulf Wetzker <ulf.wetzker@eas.iis.fraunhofer.de>

	* : at91sam3: Added support for at91sam3sd8a and b This update is untested due to missing hardware.  Change-Id: Ibe286b741ebbb1c8ae0bd3dea4b8f3e12320ab34 Signed-off-by:
	Ulf Wetzker <ulf.wetzker@eas.iis.fraunhofer.de> Reviewed-on:
	http://openocd.zylin.com/1423 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-06-19  IS2T <devel@is2t.com>

	* : Support for SST 39VF3201C NOR flash  * Add Thumb-2 code to write flash memories that don't support DQ5
	 polling * Make sure default values for unlock commands are set even if there
	 is no PRI information given by the flash * Add a fixup to disable DQ5 polling for the SST 39VF3201C Change-Id: Ib08cf20547d0f500d5f78241521e6b49050c3d40 Signed-off-by:
	IS2T development team <dev.is2t@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1449 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-06-02  Zied Guermazi <guermazi.zied@gmail.com>

	* : keep gdb aware of threads if RTOS is set but no threads are
	created if gdb server (openocd) answers qfThreadInfo with an empty string
	during boot, gdb will not request thread info anymore. to keep
	thread awareness in gdb, we have to answer with a non empty string,
	'l' indicates an end of list, and is a valid answer here.  Change-Id: I7870a5db1090c786f306db16a25871e69b8a9760 Signed-off-by:
	Zied Guermazi <guermazi.zied@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1432 Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-06-05  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : Allow autoscan up to 64 bit IR lengths Change-Id: Ib15ff67b57606fe6c7997f3f9bd90e096acd5f3d Signed-off-by:
	Evan Hunter <ehunter@broadcom.com> Signed-off-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/832 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2013-06-16  Robert Jarzmik <robert.jarzmik@free.fr>

	* : drivers/jtag: usb_blaster add pin controls Add pin controls (pin6 and pin8). These pins can be controled either
	 : - with a fixed value (0 or 1)  - by TRST or SRST reset signal (driven low when signal  activated).  Change-Id: Ie6a3e57fc6ba6a38fdb9a009c976e3febab8f578 Signed-off-by:
	Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-on:
	http://openocd.zylin.com/1448 Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Tested-by: jenkins

2013-06-21  Antonio Borneo <borneo.antonio@gmail.com>

	* : flash/nor/spi: add flash Micron n25q064 Change-Id: Ic39bb6d020767cece2eaa4e194071be8b002ece4 Signed-off-by:
	Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1452 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-06-19  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : stm32f2x: Correct calculation of number of 128k sectors.  Fixes regression introduced in 9785f51f that caused write outside
	allocated memory during probe of devices with <1024K flash.  Reported-by: Alexander Pakhomov <ker0sin@yandex.ru> Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Change-Id:
	Ifba8833e436064624efbf678162538fd351a5702 Reviewed-on:
	http://openocd.zylin.com/1450 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-06-14  Spencer Oliver <spen@spen-soft.co.uk>

	* : build: fix incorrect configure quotes Change-Id: I427035df1ab2bfb2ec6ac8fafc9683f7d3e3bf06 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1444 Tested-by: jenkins

2013-03-09  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : [RFC] mips: Enable bulk write optimization for all writes mips_m4k_bulk_write_memory was only called from target_write_buffer
	as an optimization when the word count was large enough.  Remove mips_m4k_bulk_write_memory from the target type, causing the
	default implementation to call the regular mips_m4k_write_memory
	instead.  Perform the dispatch to bulk write in mips_m4k_write_memory,
	enabling the optimization for target_write_memory() writes with size
	4, in addition to target_write_buffer() writes.  It also enables making the choice of bulk write vs regular write
	specifically for the architecture and not relying on the generic
	target code to make a sensible decision.  Change-Id: I295f21a67ceaa195802403f2518ea2e0a025c1c7 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1215 Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk> Tested-by: jenkins

2013-06-09  Giuseppe Barba <giuseppe.barba@gmail.com>

	* : stm32w: add STM32w108xx generic configuration Add generic TCL configuration for STM STM108Wxx chips.  Change-Id: I981cdccb78833f442c3be4188c8c023064067e4e Signed-off-by:
	Giuseppe Barba <giuseppe.barba@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1439 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-06-05  Spencer Oliver <spen@spen-soft.co.uk>

	* : cortex_a: remove memory leak on failure If mem_ap_sel_write_atomic_u32 fails then tmp_buff may not be
	released.  Detected by clang.  Change-Id: I3d5416bd47d0eea61f61ec02ac5e43c82f114108 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1433 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2013-06-11  Jim Norris <u17263@att.net>

	* : Change variable scope.  Change scope of the variable gdb_reg_list_idx from global to module.  Change-Id: Ib8273c0769c11c1d5a338e4711efbddb8e8a0243 Signed-off-by:
	Jim Norris <u17263@att.net> Reviewed-on:
	http://openocd.zylin.com/1441 Tested-by: jenkins Reviewed-by:
	Øyvind Harboe <oyvindharboe@gmail.com>

2013-05-31  Paul Fertser <fercerpav@gmail.com>

	* : libusb1_common, ftdi: clarify libusb_open error message Print a user-friendly message when libusb_open() fails, e.g.  Error:
	libusb_open() failed with LIBUSB_ERROR_ACCESS when there's a
	permissions problem.  Also output a configure warning if libusb older than 1.0.9 is
	detected.  Change-Id: I800f71f06672fe06c0a98a4e469f853b5021bcfe Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1430 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-06-10  Spencer Oliver <spen@spen-soft.co.uk>

	* : build: fix incorrect GPL address from last commit 962b3eb40cc5b69d9b3d6fcc4c5d56c4d204a307 included the old GPL
	address.  Change-Id: I7affbdc3fc1c9251ea90796ab9eeef4d56ba4308 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1440 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2013-06-02  Spencer Oliver <spen@spen-soft.co.uk>

	* : update files to correct FSF address Change-Id: I429f7fd51f77b0e7c86d7a7f110ca31afd76c173 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1426 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2013-02-05  Hsiangkai Wang <hsiangkai@gmail.com>

	* : nds32: add new target type nds32_v2, nds32_v3, nds32_v3m Add target code for Andes targets.  Change-Id: Ibf0e1b61b06127ca7d9ed502d98d7e2aeebbbe82 Signed-off-by:
	Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1259 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-04-14  Robert Jarzmik <robert.jarzmik@free.fr>

	* : drivers/jtag: rewrite usb_blaster driver Rewrite the Altera USB Blaster dongle driver :  - make extensive use of byte-shift mode, to improve JTAG    speed.     This is the main reason of the rewrite. It improves the    memory dumps with a factor 3 at least, and upload 100    times, from 1 kBytes/sec to 100 kBytes/sec with a    USB-Blaster connected to an Altera Virtual JTAG TAP +    OpenRISC CPU.   - split the low level API part (between FTDI and FTD2xx)  from core driver, so that in the future, if both libftdi  and ftd2xx can coexist, the driver will be able to switch  dynamically from one access to the other.  Change-Id: I2ee9cedf4a5eb27501f337993ee0cdee52517e7c Signed-off-by:
	Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Marek Czerski
	<ma.czerski@gmail.com> Tested-by: Franck Jullien
	<franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/467
	Tested-by: jenkins Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Reviewed-by: Alexandre Becoulet
	<alexandre.becoulet@free.fr> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-05-05  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : cortex_a: fix FTBS on ARM due to alignment issues Native compilation on RaspberryPi with gcc (Debian 4.6.3-1) 4.6.3
	Target: arm-linux-gnueabi ends with error: cortex_a.c: In function 'cortex_a8_read_apb_ab_memory':
	cortex_a.c:2063:40: error: cast increases required alignment of
	target type [-Werror=cast-align] cc1: all warnings being treated as
	errors Also check for malloc failure.  This patch is compile-tested only.  Change-Id: I580c505424d03ac3a565de54182db22277c52ac1 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1369 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Paul Fertser
	<fercerpav@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-04-22  William M.A. Traynor <wmat@alphatroop.com>

	* : user guide: Update the ZY1000 description.  As per request from Peter at Ultimate Solutions, updated the
	description of the ZY100 Stand-alone JTAG probe.  Signed-off-by: Bill Traynor <wmat@alphatroop.com> Change-Id: Ia5c0b9a7261becd524a02aba1b22a98a2e09a4c9 Signed-off-by:
	William M.A. Traynor <wmat@alphatroop.com> Reviewed-on:
	http://openocd.zylin.com/1357 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-05-11  Paul Fertser <fercerpav@gmail.com>

	* : cortex_m, hla_target: do not try asserting SRST if it's not
	present This should cover all the cases when RESET_SRST_NO_GATING is set
	without RESET_HAS_SRST. This might happen when RESET_SRST_NO_GATING
	is automatically set by a target code (and not from tcl).  However, there're some other places (mips_m4k, arm7_9_common) where
	adding RESET_SRST_PULLS_TRST would lead to trying to use SRST even
	if it's not present. Currently it's impossible for the user to
	enable that flag without enabling SRST.  Change-Id: Ib1c6f68feed0b8057d55afd5f260bb22ab332ced Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1405 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-05-23  Paul Fertser <fercerpav@gmail.com>

	* : targets: fix target_type name for Cortex-A targets Commit d9ba56c295f057e716519a798bf9cdb4898c24f4 did a bunch of
	renaming of cortex_a8 to cortex_a, including the names in config
	files. However that introduced a regression as the name in
	target_type struct remained unchanged.  This adds the last missing bit: actual renaming of the target name
	as understood by OpenOCD.  Also change the (hopefully) last instance of using it in the
	supplied config files, namely from imx6.cfg.  Change-Id: Ib9289fc6d946630133ec6e36c20015ccb50acf61 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1420 Tested-by: jenkins Reviewed-by: Chris
	Johns <chrisj@rtems.org> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-05-05  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : remote_bitbang: Convert to use getaddrinfo() Since gethostbyname() is deprecated and inconvenient, rewrite to use
	getaddrinfo() using an implementation more or less copied from its
	man page. This automatically enables support for IPv6.  This also fixes a FTBFS on ARM due to alignment issues.  Change-Id: I990a49506cac4b26faf77587937e506138371f7c Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1379 Reviewed-by: Paul Fertser
	<fercerpav@gmail.com> Tested-by: jenkins Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-04-17  Ravaz <embkernel@gmail.com>

	* : Added: RTOS awareness for embKernel Change-Id: I98b60f50a5fc486bda83b83ad7ec73826ee11607 Signed-off-by:
	Ravaz <embkernel@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1334 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-05-03  Paul Fertser <fercerpav@gmail.com>

	* : telnet_server: support C-p, C-n for moving through history This modifies telnet server to allow using common readline
	combinations to move up/down history, without the need to touch
	cursor keys.  Change-Id: Ib659075883e91794b44f391f7c29bbdfdd679d10 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1376 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2013-05-03  Paul Fertser <fercerpav@gmail.com>

	* : sysfsgpio: do not try to initialise absent signals When e.g. SRST is not specified, the current code results in
	assigning 0 to srst_fd and subsequently a stray '1' is output on
	screen on reset.  Avoid this by not doing bogus initialisation.  Change-Id: Iadb847a384a927ae746124cf6e4e3c6cc8b11406 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1375 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2013-05-01  Hsiangkai Wang <hsiangkai@gmail.com>

	* : gdb_server: remove target_handle_event from gdb event callback In target_call_event_callbacks(), it will execute 1. target_handle_event (use Jim_EvalObj() to evaluate event    statements in config files) 2. call user registered callbacks Before calling user registered callbacks, target_handle_event has
	been executed.  So, there is no need to call target_handle_event()
	in gdb event callback.  It will execute event statements in config
	files twice.  Change-Id: I84629e324fa3eb909907badf2319b4138ba89f07 Signed-off-by:
	Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1372 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2013-05-05  Freddie Chopin <freddie.chopin@gmail.com>

	* : The openocd-0.7.0 release.  Change-Id: I08157f47ac056e6d2089119dd2d6cbab11b521e8 Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2013-04-28  Freddie Chopin <freddie.chopin@gmail.com>

	* : doc: Update list of interfaces, targets and boards Change-Id: If9481e061f09a37f9ee3c461a1a0ce4d382a9a0d Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1366 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-05-02  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: remove whitespace Change-Id: I20edbb50efc03711195102f4c6dc8bcfaf043d44 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1374 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2013-04-28  Freddie Chopin <freddie.chopin@gmail.com>

	* : Restore -dev suffix Change-Id: I26f49e02d228b59533237607fa8307ecc627409e Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2013-02-01  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: rename cortex_a8 to cortex_a Rename cortex_a8 target to use a more correct cortex_a name.  This
	also adds a deprecated_name var so that older scripts issue a
	warning to update the target name.  cfg files have also been updated to the new target name.  Change-Id: I0eb1429c9281321efeb444b27a662a941a2ab67f Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1130 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2013-04-20  Freddie Chopin <freddie.chopin@gmail.com>

	* : Mention "lpc4300" (with "lpc1800" alias) flash drivers in manual Change-Id: I0bb28910b2c07b1ca5bd644e0d88b931d585d3e7 Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1352 Tested-by: jenkins

2013-04-22  Christopher Kilgour <techie@whiterocker.com>

	* : kinetis: fix "SF1" parts to limit FlexRAM usage Ensure FlexRAM usage is limited to half the FlexRAM size when
	programming.  Assume the FlexNVM sector size is equal to half the
	FlexRAM.  Fix sector erase checking which had an error introduced
	  when the kinetis_ftfx_command( ) signature was changed.  Change-Id: I88edd9c7d4a4ba474cad7b00052feaeedfa8ced8 Signed-off-by:
	Christopher Kilgour <techie@whiterocker.com> Reviewed-on:
	http://openocd.zylin.com/1358 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2013-04-23  Spencer Oliver <spen@spen-soft.co.uk>

	* : arm: fix arm reg regression Seems commit fc2abe63fd3cea7497da7be2955d333bd3f800b9 caused a
	regression in that the arm reg cmd no longer worked. The issue was
	caused because we changed the value of ARM_MODE_THREAD which was
	being checked in arm_init_arch_info.  Change-Id: Id571d4ab336d1b0e2b93363147af245d24b65ca5 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1362 Tested-by: jenkins Reviewed-by: Luca
	Bruno <lucab@debian.org> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2013-04-23  Hsiangkai Wang <hsiangkai@gmail.com>

	* : gdb server: Fix bug. Parse 'M' packet error.  The format of 'M' packet is 'M addr,length:XX...'. The data follows
	':' immediately. No need to '+2' to SEPARATOR in unhexify(), because
	SEPARATOR points to data correctly.  Change-Id: I15b5758b540816cc727752e7bf68cd45e623f603 Signed-off-by:
	Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1360 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2013-04-21  Freddie Chopin <freddie.chopin@gmail.com>

	* : Restore -dev suffix Change-Id: I3662c5993766a76d6dd62b919c56cc059c4e50d4 Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2013-04-20  Freddie Chopin <freddie.chopin@gmail.com>

	* : Add "lpc1800" alias for "lpc4300" flash driver Change-Id: I6d2bb9105cc778bd1d21580022529d684c3b21b0 Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1351 Tested-by: jenkins

2013-04-20  Freddie Chopin <freddie.chopin@gmail.com>

	* : Improve HACKING Reword info about creating SSH key - it's not required to add it to
	Github account. Mention adding created SSH key to Gerrit account -
	without this step it's not possible to access Gerrit in further
	steps.  Change-Id: Ibd81521fbe47d4b4beae0b77cdc9d939fd3ee20c Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1350 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com>

2013-04-19  R. Steve McKown <rsmckown@gmail.com>

	* : Support newer OSBDM firmware OSBDM: add new VID:PID implemented in OSJTAG/OSBDM firmware
	somewhere between versions 30.13 and 31.21.  PFLASH programming
	works with this patch, tested on a Freescale Kinetis TWR-K20D72M
	using its onboard OSBDM JTAG adapter.  Note: flash program testing required hacking kinetis_write() to
	force longword programming, as the FTFL program section commands
	formulated by kinetis_write() currently fail on this board's
	PK20DX256VLL7 processor.  Change-Id: Ib7b92ff2fe9ebf6158fb1489f554a19e96cd9651 Signed-off-by:
	R. Steve McKown <rsmckown@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1348 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2013-04-03  Salvador Arroyo <sarroyofdez@yahoo.es>

	* : mips: m4k alternate pracc code. Patch 4 Now all the functions with only fetch accesses are modified.  The
	same delay between scans has been added to
	mips32_pracc_fastdata_xfer(), it should work at the same scan rates
	as the other pracc functions, but it needs higher scan_delays to
	work.  Change-Id: Ifb31d8ea6de9d22674385782913d221a2494dbbf Signed-off-by:
	Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on:
	http://openocd.zylin.com/1196 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2013-03-03  Salvador Arroyo <sarroyofdez@yahoo.es>

	* : mips: m4k alternate pracc code. Patch 2 Each pracc function defines a variable ctx of type struct
	pracc_queue_info.  To simplify the code tree auxiliary functions are
	defined: pracc_queue_init(), pracc_add() and pracc_queue_free().
	The second parameter in pracc_add() is the store address if the
	instruction is a store at dmseg, otherwise it should be 0.  The code
	is executed by mips32_pracc_queue_exec(). If ejtag_info->mode is 0
	mips32_pracc_exec() is called and it should work like with current
	code.  To generate the delay between scans the number of clock ticks
	are calculated with the help of jtag_get_speed_khz(). Due to delays
	in the execution of each single ftdi instruction the number of ticks
	are higher as it should be, specially at higher scan rates.
	mips32_pracc_read_u32() should now work with the new code.  Change-Id: I471590a4fc89b56af10bd46c48767b4c64de154f Signed-off-by:
	Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on:
	http://openocd.zylin.com/1194 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2013-04-20  Freddie Chopin <freddie.chopin@gmail.com>

	* : Improve clone command in README Without the explicit dir at the end the repository will be cloned to
	"code".  Change-Id: Icd8b55b4ba74f23b214c3844e2fb785377768119 Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1349 Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com> Tested-by: jenkins

2013-04-17  Ben Nahill <bnahill@gmail.com>

	* : topic: STM32W support added to em357 driver The em357 driver only supported one page configuration (192k in 96
	2048k) pages. This is fine for em357 chips since that's the size
	they have, but ST's STM32W chips (pretty much the same) have
	different flash configurations available (64, 128, 192, 256k). I
	can't find anywhere that would indicate the size of the chip
	anywhere in memory so the selection must be manual, using the 'size'
	parameter. For backwards compatibility, any size not known to be in
	use defaults to the 192k configuration. I don't have any em357
	devices to test, but I also found that I had to re-assert the FPEC
	clock enable before performing an erase. This is a single line and
	shouldn't break any configurations.  My testing so far has only been with a 64k device with 8k of RAM.  Change-Id: Ic0ac400a9696efaa09d1407dd4a4d456bc2c318b Signed-off-by:
	Ben Nahill <bnahill@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1336 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2013-04-11  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: fix connect under reset issues We need to make sure that srst is asserted before we attempt to
	switch into jtag or swd mode otherwise we receive a error (-9) -
	invalid device id.  Change-Id: I625166c751cfba8e8a5290f40122bb9afc9dbb39 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1315 Tested-by: jenkins

2013-03-19  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : ft2232: remove ft2232_large_scan memory leak This is a very long outstanding issue see:

	http://lists.berlios.de/pipermail/openocd-development/2011-June/019404.htmlAs this driver is deprecated the fix is added to purely to reduce
	the warnings reported by clang.  Change-Id: I3a16a704e0e8db27efda50fdcfdd35abf5ebed0f Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1278 Tested-by: jenkins

2013-03-28  Spencer Oliver <spen@spen-soft.co.uk>

	* : jimtcl: update embedded jimtcl Update to latest jimtcl commit
	2c1eba991e21a6f0b531fb0f83e21f9e6ee7c515.  This fixes issues when
	building on certain versions of Mac OSX.  Change-Id: I551477752d7913c84e6deb60b889d0c14bd200a0 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1311 Tested-by: jenkins Reviewed-by:
	Xiaofan <xiaofanc@gmail.com>

2013-04-15  Peter Dietzsch <peter.dietzsch@ib-dt.de>

	* : flash: Added support for at91sam4sd32c Change-Id: I7223980602d7595a3dd7a3ceaac3f58d4f73f88d Signed-off-by:
	Peter Dietzsch <peter.dietzsch@ib-dt.de> Reviewed-on:
	http://openocd.zylin.com/1332 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2013-03-18  Michel JAOUEN <michel.jaouen@stericsson.com>

	* : arm_adi_v5: fix for csw nonsecure access.  Add command to fix CSW_SPROT in register AP_CSW.  This solves dap
	apmem access in non secure access.  Change-Id: I7cfcb6434d75f5cfd4a2630a059901cdeea010ce Signed-off-by:
	Michel JAOUEN <michel.jaouen@stericsson.com> Reviewed-on:
	http://openocd.zylin.com/1276 Tested-by: jenkins Reviewed-by: mike
	brown Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

2013-02-24  Salvador Arroyo <sarroyofdez@yahoo.es>

	* : mips: change in restoring debug working register In current devel code there are 3 functions (related to m4k code)
	that need to restore register 8 from pracc stack:
	mips32_pracc_read_u32() mips32_cp0_read()
	mips32_pracc_write_mem_generic() And mips32_pracc_read_mem() needs to restore regs 8 and 9 from pracc
	stack.  Values in this registers should be the same as read by
	mips32_pracc_read_regs() when entering debug mode and can be
	modified by mips32_pracc_write_regs() when leaving debug mode.
	There is no need to read their values from the processor registers
	every time.  The fields reg8 and reg9 are added to struct mips_ejtag to store
	these register values and the call to mips32_save_context() is
	shifted in mips_m4k_debug_entry() in order to store them before any
	other function needs to restore these registers.  For the same
	reason in function mips_m4k_step() the call to
	mips_m4k_set_breakpoint(), if needed, should be made after calling
	mips_m4k_debug_entry().  For single word write the number of pracc
	accesses are now 9 or 8, from 13 or 12 in current code, single word
	read takes now 10 instead of 12.  This patch is really the first in a set of patches for an alternate
	m4k pracc code much faster that current code. At least for me with
	pic32mx works fine.  Change-Id: Ibd9df5e8b9f78ce05a180949ba6a561c761b61d6 Signed-off-by:
	Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on:
	http://openocd.zylin.com/1146 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-02-23  Salvador Arroyo <sarroyofdez@yahoo.es>

	* : pic32mx: 0 wait state option By default pic32mx starts after any reset with 1 wait state for RAM
	access/exec.  It can be changed to 0 wait states by clearing the
	BMXWSDRM bit (bit 6) in BMXCON register.  With 0 wait states near
	doubles the execution speed. CRC check sum can be done much faster
	increasing verify_image speed. Fast data transfer also works with a
	bit higher scan rate, up to 1500 Khz.  This option can be set at any
	time with mww 0xbf882004 0x40 or cleared with mww 0xbf882008 0x40.
	Some numbers for FTDI/HS with current devel code and a elf file: Core clock / wait states	             verify_image speed
	------------------------------------|------------------------------         4 Mhz    /    1                            21 KiB/s         4 Mhz    /    0                            36 KiB/s         8 Mhz    /    1                            37 KiB/s         8 Mhz    /    0                            57 KiB/s Change-Id: I4092ad0f3753f72f77108718d0ed3a3ab84e3b23 Signed-off-by:
	Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on:
	http://openocd.zylin.com/1141 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Xiaofan
	<xiaofanc@gmail.com>

2013-02-27  Henrik Nilsson <henrik.nilsson@bytequest.se>

	* : Added support for ARMv7-M in arm io.  Added support for ARMv7-M targets in arm_nandwrite and arm_nandread.  Change-Id: Iab1d78d401f735e191c6a8519f3619035a300fae Signed-off-by:
	Henrik Nilsson <henrik.nilsson@bytequest.se> Reviewed-on:
	http://openocd.zylin.com/1188 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2013-03-18  mike brown <theshed@mikebrown.org.uk>

	* : arm_adi_v5: fix mem_ap_read_buf_u32() JTAG nastiness..  Moved JTAG code out of transport-neutral file (arm_adi_v5.c) into
	transport specific file (adi_v5_jtag.c).  Added ap_block_read to
	dap_ops interface (arm_adi_v5.h) to support the move.  Change-Id: I796d3984f138aad052b97c77ac9c12ffd1158f74 Signed-off-by:
	mike brown <mike@theshedworks.org.uk> Reviewed-on:
	http://openocd.zylin.com/1277 Tested-by: jenkins Reviewed-by: Michel
	JAOUEN <michel.jaouen@stericsson.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-03-19  Spencer Oliver <spen@spen-soft.co.uk>

	* : ti_icdi: add icdi_usb_query result check Change-Id: I0b40586677a77ee6ae46fe120a677616bde22d1e Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1279 Tested-by: jenkins Reviewed-by:
	Xiaofan <xiaofanc@gmail.com> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2013-03-14  Spencer Oliver <spen@spen-soft.co.uk>

	* : docs: remove unnecessary whitespace Change-Id: I11bad3de145d941b61e9bd4920bc3281ece91ab3 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1245 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2013-03-23  Thomas Schmid <thomas.schmid@gmail.com>

	* : at91sam3: Wrong PLLA frequency calculations The command 'at91sam3 info' ignores PLLA DIV values >1. This patch
	fixes it.  Tested on a SAM3S4C chip.  Change-Id: I051f41bb3dcefe1ac785fbcb48477a807daa16a2 Signed-off-by:
	Thomas Schmid <thomas.schmid@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1307 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2013-03-15  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: fix broken Cortex-R4 support This regression was caused due to the recent addition of R4 support
	and the removal of the bulk_write_memory handler.  Change-Id: Ide692737f235c0e9906becb6f3502ba52c5907aa Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1246 Tested-by: jenkins

2013-03-08  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : target: Add default implementation of bulk_write_memory Remove dummy implementations from all targets except arm7_9 and
	mips, which are the only ones with real implementations. Replace
	with a single default implementation simply calling
	target_write_memory().  Change-Id: I9228104240bc0b50661be20bc7909713ccda2164 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1213 Tested-by: jenkins Reviewed-by:
	Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2012-10-12  Evan Hunter <ehunter@broadcom.com>

	* : adi_v5: search for Debug and Memory AP support Adds dap_find_ap() function.  Change-Id: I6643025624009b12d4936de67a605da52c07be49 Signed-off-by:
	Evan Hunter <ehunter@broadcom.com> Reviewed-on:
	http://openocd.zylin.com/909 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-06-05  Stefan Mahr <stefan.mahr@sphairon.com>

	* : jtag: add support for some probes that are mostly compatible
	with opendous This patch adds support for usbprog-jtag and usbvlab that are mostly
	compatible to opendous except for IN and OUT endpoints and usb
	transfer mode.  Change-Id: I44557c2449fe7473295038efa6ae4fc8d80ec7bf Signed-off-by:
	Stefan Mahr <stefan.mahr@sphairon.com> Reviewed-on:
	http://openocd.zylin.com/687 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2013-03-12  Stefan Mahr <stefan.mahr@sphairon.com>

	* : jtag: parport: avoid freeing read-only memory section If command parport_cable is not executed, parport_cable points to
	const char array in read-only memory as default. On exit free() will
	try to free this read-only memory. This patch uses strdup to
	allocate memory when defining default setting.  Change-Id: I290e707ac6a37e9dc1b45c85ca51d8bd6aac6761 Signed-off-by:
	Stefan Mahr <stefan.mahr@sphairon.com> Reviewed-on:
	http://openocd.zylin.com/1223 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-03-10  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : target: Remove read_memory_imp Change-Id: Idc6ef3b075ccbb5945df8fea746011cb17175d8f Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1219 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-03-10  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : target: Remove soft_reset_halt_imp Change-Id: I12c907584ef73de570eba2dcfeb8477cabc6098f Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1217 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2012-12-27  Rodrigo Melo <rmelo@inti.gob.ar>

	* : interface: opendous_ftdi config file added This config file add support to the opendous cable based on the chip
	ft2232H, using the ft2232 interface driver.  Change-Id: I8171a0c475af8d61e081844ee86466a392138fb0 Signed-off-by:
	Rodrigo Melo <rmelo@inti.gob.ar> Reviewed-on:
	http://openocd.zylin.com/1096 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2012-10-08  Drasko DRASKOVIC <drasko.draskovic@gmail.com>

	* : doc: Added MIPS target document This document explains MIPS EJTAG operations implementations within
	OpenOCD.  Change-Id: Ieaf01f8bc5a97d7b0f2c847bac5fbb2ccf8ba088 Signed-off-by:
	Drasko DRASKOVIC <drasko.draskovic@gmail.com> Reviewed-on:
	http://openocd.zylin.com/904 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2013-03-02  Alex Austin <alex.austin@spectrumdsi.com>

	* : Kinetis: Symbolic names for Addresses and Commands Change-Id: I2165b66c37bd1608139b5dd00f48124161e13ef0 Signed-off-by:
	Alex Austin <alex.austin@spectrumdsi.com> Reviewed-on:
	http://openocd.zylin.com/1191 Tested-by: jenkins Reviewed-by:
	Christopher Kilgour <techie@whiterocker.com> Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2013-03-06  Spencer Oliver <spen@spen-soft.co.uk>

	* : tcl: add flash programming helper This adds a program proc that simplifies using OpenOCD as a
	standalone programmer.  Change-Id: I6ece492cd878c170b734e8bb2e09fe8c4557d5a6 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1199 Tested-by: jenkins Reviewed-by: Jörg
	Fischer <turboj@gmx.de> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com> Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com>

2013-03-07  Spencer Oliver <spen@spen-soft.co.uk>

	* : gdb: use stdio functions to convert parameters This reduces the number of gdb conversion routines we have to
	maintain.  Change-Id: Ia43d6cac86cbe4f76fe0875b9d9c16ac340296db Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1128 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2013-03-07  Spencer Oliver <spen@spen-soft.co.uk>

	* : docs: use doxygen keywords for formatting Rather than use bold fonts etc, use the correct keywords so doxygen
	formats better.  Change-Id: Id9d63f0fc3465665376d7a536c4d6da71998f40e Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1210 Tested-by: jenkins Reviewed-by:
	Øyvind Harboe <oyvindharboe@gmail.com>

2013-02-27  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: fix stm32 failed probe using incorrect flash size This fixes an issue if the device is manually probed after the
	initial probe fails due to being unable to read flash size register.
	In this situation the driver assumes the user has overridden the
	flash size when infact this may not be the case.  It also seems on the older stm32f1 devices the flash register is not
	readable when locked, this does not seem to apply to the newer parts
	- f0, f3, f4.  Change-Id: I125f872fcb2d962ca6705f97b62d957e2b31303b Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1187 Tested-by: jenkins Reviewed-by: Johan
	Almquist <johan.almquist@assaabloy.com> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2013-02-25  Spencer Oliver <spen@spen-soft.co.uk>

	* : ti-icdi: catch failed icdi_send_cmd warnings detected by clang.  Change-Id: I1532bcc12a8ab7446646dfb2a7afa8894ff03679 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1180 Tested-by: jenkins Reviewed-by:
	Xiaofan <xiaofanc@gmail.com> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2013-02-25  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: use common target_name to access target::cmd_name member Change-Id: I203b89ef25a072c3b00b504483d5f2a83477fad6 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1182 Tested-by: jenkins Reviewed-by:
	Mathias Küster <kesmtp@freenet.de> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2013-02-27  Mathias K <kesmtp@freenet.de>

	* : Change reset configuration.  This patch change the default reset config from SYSRESETREQ to the
	working VECTRESET.  Change-Id: I21a9a74b9c0c68cfa3a6e6dac9b123acc98a93cb Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/1186 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-02-25  Mathias K <kesmtp@freenet.de>

	* : Add the target name to debug output for better understanding and
	error identification.  Change-Id: I1054debea6cd3a6548aadeae2d84000a0039814e Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/1178 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-01-31  Spencer Oliver <spen@spen-soft.co.uk>

	* : gdbserver: use common hexify/unhexify routines Change-Id: I9989b625666e9c60ec9867cf6f4d94f41c998c3f Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1105 Tested-by: jenkins Reviewed-by:
	Mathias Küster <kesmtp@freenet.de> Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com>

2013-02-07  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: hla correctly use target events Because we were always running using target state TARGET_RUNNING
	target algorithm's were a bit verbose compared to other targets.  This brings the hla target inline with the other targets.  Change-Id: I3a257fdc878b87660fac8b5eca22b421eee5b349 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1134 Tested-by: jenkins

2013-02-19  Johan Almquist <johan.almquist@assaabloy.com>

	* : stm32: add support for stm32l1x 256k high density single bank
	devices Added support for new ST devices in the stm32lx portfolio, with
	device id 0x427. These have 256k flash, but in a single bank
	compared to device id 0x436 which is a dual bank flash.  Change-Id: Iafdfe990f24bd04b0d6e00385ee70690f3bf8d5f Signed-off-by:
	Johan Almquist <johan.almquist@assaabloy.com> Reviewed-on:
	http://openocd.zylin.com/1140 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2013-02-05  Spencer Oliver <spen@spen-soft.co.uk>

	* : stm32: enable flash bank size override It has been seen on some stm32 targets that the flash size register
	that is probed by the driver may contain an invalid size.  This change enables the user to override the probed value.  Change-Id: I09359e59a96f9133d3d939670957d32a830a944e Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1132 Tested-by: jenkins Reviewed-by: Johan
	Almquist <johan.almquist@assaabloy.com>

2013-02-01  Spencer Oliver <spen@spen-soft.co.uk>

	* : armv7m: use ARM_MODE_THREAD core mode for algoorithm's This makes sure we are using privileged mode when executing any
	loaders.  Change-Id: I18bf32ec92e1c76a66ab25e3712652bc3650b332 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1108 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2013-01-09  Spencer Oliver <spen@spen-soft.co.uk>

	* : armv7m: use generic arm read/write_core_reg Change-Id: I0c15acc1278d2972269d294078495e6b069c830b Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/969 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2012-11-08  Spencer Oliver <spen@spen-soft.co.uk>

	* : armv7m: remove unused armv7m_regtype This simplifies the armv7m_core_reg structure ready for the move to
	using the generic struct arm_reg.  Change-Id: I8edb9d77cc54965d49cd2e754568ebcea4cf6964 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/967 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2013-01-28  Spencer Oliver <spen@spen-soft.co.uk>

	* : helper: hexify correctly handle signed chars The current implementation of hexify was not correctly handling
	signed chars.  This function is currently used by the ti-icdi driver and as such
	was causing random write issues.  As a note perhaps a better long term fix would be to change to using
	uint8_t buffers rather than char. This will require changes to the
	ti-icdi driver aswell.  Change-Id: I572e69ff2b99227a7d412de056458c0393794b03 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1124 Tested-by: jenkins Reviewed-by:
	Øyvind Harboe <oyvindharboe@gmail.com>

2013-01-03  Spencer Oliver <spen@spen-soft.co.uk>

	* : rtos: do not use LOG_OUTPUT LOG_OUTPUT is not intended for general output so use the correct
	LOG_* functions instead.  Change-Id: I48d0fe765637024dbafc68f2ea08219d3ff42754 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1104 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2013-01-16  Spencer Oliver <spen@spen-soft.co.uk>

	* : jtag: only change state if necessary All the other drivers will only change the state if required.  This
	brings all the other drivers inline with this behaviour.  The original issue relates to problems on xscale commit
	7989000e0969c1ccf69acbc3ce649a020bc1ee66 Change-Id: Ifc90ec2eef68a70a14f37c00931a07982bfa200c Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1114 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2013-01-25  Spencer Oliver <spen@spen-soft.co.uk>

	* : hla: enable DWT component and fix watchpoints The makes sure the DWT component is always enabled so that
	watchpoints work as expected.  This does need merging into the existing cortex_m logic, however at
	the moment this is non trivial.  Change-Id: Ic6cccd1badb51f70a2ca8ea9ab6923788a94c1bf Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1122 Tested-by: jenkins Reviewed-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2012-12-07  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: reduce stm32lx loader timeout Waiting 20secs is a bit much excessive, we could probably reduce to
	5.  Change-Id: Iffb97adb99c2541a075fe78dbc88a53ddf340214 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1009 Tested-by: jenkins

2012-12-30  Spencer Oliver <spen@spen-soft.co.uk>

	* : docs: update stm32f1x/stm32f2x driver info As we use the two ST flash drivers for multiple stm32 variants
	update the docs as to which targets use which driver.  Change-Id: I84943ff45482a22b3d3dd8491bb4242d79415939 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/990 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2013-01-04  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: add stm32f2x flash lock/unlock cmds Change-Id: I35344cc47fa4f0a49c034455c5abf479faa0344a Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/988 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2013-01-18  Roman D <me@iamroman.org>

	* : flash: EFM32 GG/LG page size detection fix Fixed flash page size detection according to EFM32 GG/LG errata.
	MEM_INFO_PAGE_SIZE register containts invalid value in devices with
	revision number lower than 18 and should not be used.  Change-Id: Idb2832246efcbbec2fd98a5c458f72a36df386fb Signed-off-by:
	Roman D <me@iamroman.org> Reviewed-on: http://openocd.zylin.com/1116
	Tested-by: jenkins Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-01-10  Roman D <me@iamroman.org>

	* : flash: EFM32 flash implementation Limited (no page unprotect, no block writes) implementation of EFM32
	flash support. Verified with EFM32 development kit and STLink V2
	adapter using SWD.  Change-Id: I3db2054d9aa628a1fe4814430425db3c9959c71c Signed-off-by:
	Roman D <me@iamroman.org> Reviewed-on: http://openocd.zylin.com/1106
	Tested-by: jenkins Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2013-01-02  Spencer Oliver <spen@spen-soft.co.uk>

	* : hla: support setting DCB_DEMCR on resume This is only minimal support to enable use to catch a Hard Fault in
	the stm32l flash bootloader.  Change-Id: I21d6a11893e2f1d173ebff1a651d6f52bf6eec32 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1103 Reviewed-by: Peter Stuge
	<peter@stuge.se> Tested-by: jenkins

2012-11-20  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: use correct stm32f1x option read mask Make sure we do not mask out the BFB2 boot bank bit, as this is used
	on the larger XL devices.  Change-Id: Iacfdf874140e409e0c4ca9b9aee8f5c2f90dc9be Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/991 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2012-11-20  Spencer Oliver <spen@spen-soft.co.uk>

	* : stm32f1x: preserve user option byte data The user is able to use 2bytes of the options byte data for whatever
	purpose they wish. Make sure we preserve this during an option
	erase/write.  Change-Id: Ibf951b11c59a148e671b1eb47fdc9b4f49ccae15 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/983 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2012-12-29  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : doc: Clarify the topic field in the commit comment template Change-Id: Iea1f3b665b011ca3748800048039d3f6b33d7756 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1101 Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com> Reviewed-by: Tomasz CEDRO <cederom@tlen.pl>
	Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2012-12-06  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: increase stm32l-discovery working area This part has 16k ram so make it all available.  Change-Id: Ifeb7bc850bfe4f68d0affb8f6a0931b4327e7257 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1006 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2012-12-04  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: enable stlink stm32l HSI Switch to using the internal HSI when a reset init is called, this
	also matches the std stm32l cfg.  Read (verify) speed is increased from 17 to 120 KiB/s.  Change-Id: Ic94ba85949ffdefa17b7be45eef14e30f941d107 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/1004 Tested-by: jenkins Reviewed-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com>

2012-11-20  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: format stm32f2x driver defines Change-Id: Ie903996368a8d4313df87839d5ba3f2a102796a3 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/987 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2012-11-15  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: add generic open error routine Change-Id: I1cd18896ab2a37255471a2d160befed8dd8fb544 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/979 Tested-by: jenkins

2012-11-22  Spencer Oliver <spen@spen-soft.co.uk>

	* : gdb: fix correct shutdown when using pipes 50d5441e2a615fb2c44b41a777e4373901f7a2e6 commit added a regression
	when using pipes with GDB, OpenOCD would appear to hang when exiting
	GDB.  This fixes that behaviour so we shutdown correctly.  Change-Id: I9b337c2bdd41b1966de1c7631118257afcbfa6bd Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/993 Tested-by: jenkins

2012-11-08  Spencer Oliver <spen@spen-soft.co.uk>

	* : doc: replace luminary with TI urls's Change-Id: Ic8a768f5a498e78b96421c6137238593c159fd72 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/970 Tested-by: jenkins

2012-11-12  Spencer Oliver <spen@spen-soft.co.uk>

	* : icdi: add TI icdi interface This is the new proprietary interface replacing the older FTDI based
	adapters.  It is currently fitted to the ek-lm4f232 and Stellaris
	LaunchPad.  Change-Id: I794ad79e31ff61ec8e9f49530aca9308025c0b60 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/922 Tested-by: jenkins

2012-10-25  Spencer Oliver <spen@spen-soft.co.uk>

	* : hla: fix watchpoints not being set Watchpoints were not being enabled when the hl adapter target was
	resumed.  This effects both stlink and icdi interfaces.  Change-Id: Ia9f8a9415be97a467cd099b63b6bc9f7f37d0c0d Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/931 Tested-by: jenkins

2012-10-24  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: rename stlink cmd names As part of the switch to using the hla for the stlink interface we
	rename the cmds to a more generic name.  Update scripts to match new names.  Also add handlers for deprecated names.  Change-Id: I6f00743da746e3aa13ce06acfdc93c8049545e07 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/921 Tested-by: jenkins

2012-10-24  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: print version info Print stlink info always rather than just when debug log enabled.  Change-Id: I2a29ef046925200e1c94624280c0b252fab5219a Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/925 Tested-by: jenkins

2012-11-15  Muranaka Masaki <monaka@users.sf.net>

	* : flash: fm3 mb9bfxx7 mb9bfxx8 support Patch submitted by Trac #55 Change-Id: I08b0d79d24fe9108ca0bbfbc9b45c60359b6d180 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/981 Tested-by: jenkins

2012-12-10  Kamal Dasu <kdasu.kdev@gmail.com>

	* : mips_m4k: Fixed mips_m4k_resume code for smp targets Fix for bug introduced in in mips smp support code in the  resume
	logic that is checking for wrong return value.  Change-Id: Ice3e0069f936b556fecc338ccc12ddba38deeaf6 Signed-off-by:
	Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-on:
	http://openocd.zylin.com/1048 Tested-by: jenkins Reviewed-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2012-11-26  Spencer Oliver <spen@spen-soft.co.uk>

	* : jtag: fix reset_config copy/paste error As the other arg checks do not OR, it is assumed this is a
	copy/paste error from the original code author.  Change-Id: I7dfc7396254a6f558887def951c57dfd4a0e6c2c Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/997 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2012-11-13  Spencer Oliver <spen@spen-soft.co.uk>

	* : jtag: enable connect under reset Currently if the target supports srst_nogate we wait until target
	assert_reset until we get a chance to assert the srst.  However
	sometimes we will not get this far if the target has already failed
	the jtag_examine_chain.  This has been tested on targets that support this behaviour (STM32
	and STR9).  Change-Id: Ibcf7584b137b472f31ba6ddd5cd99d848c5508d1 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/971 Tested-by: jenkins Reviewed-by: Paul
	Fertser <fercerpav@gmail.com> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2012-11-02  Evan Hunter <ehunter@broadcom.com>

	* : cortex_a: Fix target entry state route.  If target is disabled at init, then is examined using 'arp_examine',
	it can get to cortex_a8_poll with the target state being unknown.  Change-Id: Ifffb345bf971d275d2eb1912648b29f0a75f6ccc Signed-off-by:
	Evan Hunter <ehunter@broadcom.com> Reviewed-on:
	http://openocd.zylin.com/954 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-10-17  Kamal Dasu <kdasu.kdev@gmail.com>

	* : mips_ejtag: Adding EJTAG 4.x and 5.x as valid versions This is a minor change to log EJTAG version 4.x and 5.x as valid
	versions when debug log is enabled.  Change-Id: Ie20458d033c6d22842cb4a31b56765d4ba2ff123 Signed-off-by:
	Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-on:
	http://openocd.zylin.com/936 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-11-30  Aymeric Vincent <vincent.aymeric@gmail.com>

	* : Make NetBSD a recognized system Change-Id: I7fcb540553da7833a8b6a82335a7296539a8f491 Signed-off-by:
	Aymeric Vincent <vincent.aymeric@gmail.com> Reviewed-on:
	http://openocd.zylin.com/998 Reviewed-by: Peter Stuge
	<peter@stuge.se> Tested-by: jenkins

2012-11-15  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: format src defines Change-Id: I7c3fd6e84681e007f1983ad9b8c85369cf9f3ba1 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/978 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2012-11-11  Salvador Arroyo <sarroyofdez@yahoo.es>

	* : mips: patch mips32_pracc_exec_write() No function writes to MIPS32_PRACC_PARAM_IN addresses and probably
	has no much sense.  Any attempt to write to those addresses should
	be an error.  Change-Id: Iebea5fa9954e2cd56ad34976dd7d25009c6e6388 Signed-off-by:
	Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on:
	http://openocd.zylin.com/975 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-11-03  Salvador Arroyo <sarroyofdez@yahoo.es>

	* : mips: optimize mips32_pracc_write_regs() code.  All the the loads are done with lui and ori instructions, there is
	no need to save any register, they will be overwritten.  Like in the
	previous patch, for speed optimization in write code, same
	instructions can be saved if the lower half word or the upper half
	word is 0.  If the lower half word is 0, it can be loaded with only
	a lui instruction.  If the higher half word is 0 it can be done with
	an ori instruction with register 0.  This code saves 10 pracc
	accesses at a minimum, and 40 at a maximum, obviously if register 2
	to 31 are 0 or a half word is 0 Current code needs 91 pracc
	accesses.  Change-Id: I892c5b440191d0c7a474c96845d41c373b7fc637 Signed-off-by:
	Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on:
	http://openocd.zylin.com/957 Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk> Tested-by: jenkins

2012-11-02  Salvador Arroyo <sarroyofdez@yahoo.es>

	* : mips: optimize read code for speed Really nothing new that not explained in previous patches.  The code
	is expanded as needed, there are no loops in pracc code.  For the
	first value pracc accesses are reduced from 39 to 16 and for
	aditional values from 10 to 3.  dump_image should work around 3x
	faster.  Change-Id: I37c9b13395c09eb52a91f10cdb6cbaedef8ab98b Signed-off-by:
	Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on:
	http://openocd.zylin.com/955 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-11-01  Salvador Arroyo <sarroyofdez@yahoo.es>

	* : mips: optimize CP0 read/write code MIPS32_PRACC_BASE_ADDR is defined as 0xFF200000. Now is possible to
	load the base address with a lui instruction and only one pracc
	access.  Offsets to the pracc code addresses are defined to simplify
	the code and probably make it a bit more readable or self-explained.  Change-Id: I853dd2d7fad52745931cc6e6be68c0ae156d897e Signed-off-by:
	Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on:
	http://openocd.zylin.com/951 Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk> Tested-by: jenkins

2012-10-30  Salvador Arroyo <sarroyofdez@yahoo.es>

	* : mips: optimize mips_ejtag_step_disable() code The code is a bit large compared to mips_ejtag_step_enable().  With
	the mips32 xori instruction the code can be reused.  The number of
	pracc accesses are reduced from 18 to 7.  Change-Id: If3974ebd64da4461c22b089796646990e68e1b72 Signed-off-by:
	Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on:
	http://openocd.zylin.com/944 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-11-15  Spencer Oliver <spen@spen-soft.co.uk>

	* : doc: update to new sourceforge git url The new sourceforge platform also supports http access, so use that
	rather then repo.or.cz.  Change-Id: Ica89d9475847a2095c179b240053145795549802 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/982 Tested-by: jenkins

2012-11-10  Matthias Blaicher <matthias@blaicher.com>

	* : rtos: Fix error in reading the current thread in ChibiOS/RT Commit c4ab127b4069e20e introduces a copy&paste error which affects
	the detection of the current thread.  As a result, the stack of the current thread won't be detected
	correctly in most cases.  Change-Id: Ib46b8f64be8053d7e9103f427c66796963214419 Signed-off-by:
	Matthias Blaicher <matthias@blaicher.com> Reviewed-on:
	http://openocd.zylin.com/974 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-10-22  Karl Kurbjun <kkurbjun@gmail.com>

	* : ARM v4/v5 target files: mrc and mcr help information is
	incorrect.  The order of the mrc/mcr command matches the ARM Architecture
	Reference Manual.  This patch corrects the help information for
	mrc/mcr.  Change-Id: I1f0e6a628a3644124591a6aa291b8a58cfd93b44 Signed-off-by:
	Karl Kurbjun <kkurbjun@gmail.com> Reviewed-on:
	http://openocd.zylin.com/914 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-10-08  Peter Horn <peter.horn@bluewin.ch>

	* : cortex_m: Fix single stepping will not return to debug mode
	sometimes This occurs when stepping past a breakpoint on a even address with
	maskisr option set to auto With -d3 the following log message appears in this case: "Debug : Interrupt handlers didn't complete within time,  leaving target running" Cause : Given a breakpoint is set on the lower half word and the PC
	is on the upper half word. When another breakpoint is now set on the
	current PC then resuming the core will not result in a break on the
	newly set breakpoint. This has been observed on a STM32F1x, STM32F2x
	(CM3) but not on a STM32F0x (CM0). It's not clear if this is a
	STM32F1/F2 only or a general CM3 problem.  Change-Id: I384813f3bfdf935373b5e23cdb2d7f243c70cc00 Signed-off-by:
	Peter Horn <peter.horn@bluewin.ch> Reviewed-on:
	http://openocd.zylin.com/864 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-10-25  Gianluca Renzi <gianlucarenzi@eurekelettronica.it>

	* : Generic LPC1850 board w/ SPIFI flash.  This config file is intended as an example of how to use the
	lpcspifi flash driver, but it should be functional for most LPC1850
	boards utilizing SPIFI flash.  Change-Id: I855854282336701fd210134497ce014017f3aaec Signed-off-by:
	Gianluca Renzi <gianlucarenzi@eurekelettronica.it> Reviewed-on:
	http://openocd.zylin.com/929 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-11-05  Spencer Oliver <spen@spen-soft.co.uk>

	* : cortex_m: fix define formatting Change-Id: Ibdec882b2afc7e16f2361f86715463e030a54964 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/963 Tested-by: jenkins

2012-11-05  Matthias Blaicher <matthias@blaicher.com>

	* : rtos: Add FPU detection to ChibiOS/RT The stacking of ChibiOS/RT depends on the usage of an FPU. If the
	FPU is enabled the FPU registers are also saved on context switch.  This patch adds automatic detection of FPU for armv7m targets.  Note: With this patch, openocd will only output an error message       warning that the FPU is enabled.        For further FPU support, the correct stacking information       also needs to be added.  Change-Id: I0984cbd9180f247ba2fa610e74a6413cc54239ea Signed-off-by:
	Matthias Blaicher <matthias@blaicher.com> Reviewed-on:
	http://openocd.zylin.com/961 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-09-19  Sergey Borshch <sb-sf@users.sourceforge.net>

	* : fix memory leaks if add_connection() fails, memory allocated in
	copy_command_context() is lost.  Signed-off-by: Sergey Borshch <sb-sf@users.sourceforge.net>
	Change-Id: I91a2757f29612038031eb8953100faa3b850d3a6 Reviewed-on:
	http://openocd.zylin.com/836 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-10-28  Peter Stuge <peter@stuge.se>

	* : mpsse: Always perform a general reset of the MPSSE in
	mpsse_open() Per AN_135 FTDI MPSSE Basics Version 1.1, section 4.2 step 7.

	http://www.ftdichip.com/Support/Documents/AppNotes/AN_135_MPSSE_Basics.pdfThis allows to stop and restart OpenOCD reliably, without needing to
	power cycle the interface.  Change-Id: Ibeafe5ecfe7b2f6f82712cbc85116904407ddb36 Signed-off-by:
	Peter Stuge <peter@stuge.se> Reviewed-on:
	http://openocd.zylin.com/939 Tested-by: jenkins

2012-10-28  Peter Stuge <peter@stuge.se>

	* : ftdi/flyswatter2.cfg: Fix the signal layout Change-Id: If6612af25fa3562f49e9c8ccff01b6ef0af5ceb0 Signed-off-by:
	Peter Stuge <peter@stuge.se> Reviewed-on:
	http://openocd.zylin.com/938 Tested-by: jenkins

2012-10-26  Spencer Oliver <spen@spen-soft.co.uk>

	* : gdb: fix broken qCRC packet handling The rtos layer was incorrectly handling a qCRC packet as a qC
	packet.  Make sure we check for the qCRC packet and return unhandled
	so the gdb server gets a chance to handle it.  This packet is used in the gdb compare-sections cmd.  Change-Id: I21f8e5fa7225fccd13d65cf9e40186895065a7e3 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/933 Tested-by: jenkins Reviewed-by:
	Matthias Blaicher <matthias@blaicher.com> Reviewed-by: Peter Stuge
	<peter@stuge.se>

2012-10-18  Edgar Grimberg <edgar.grimberg@gmail.com>

	* : ioutil: make the file compile on MacOS The meminfo command cannot exist if the malloc.h header is not
	present.  Cannot get the mac address without sys/ioctl.h and
	SIOCGIFHWADDR defined Change-Id: Ifc0fb98c3a60c53ad2e19473e08b34c460529d0b Signed-off-by:
	Edgar Grimberg <edgar.grimberg@gmail.com> Reviewed-on:
	http://openocd.zylin.com/912 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com> Reviewed-by: Peter Stuge
	<peter@stuge.se>

2012-10-23  Matthias Blaicher <matthias@blaicher.com>

	* : rtos: fix gdb qC command answer rtos->current_thread is of type int64_t. All other commands already
	respect this.  Change-Id: I9951946ff2a09c53cd78c6ab882c80cdd2ab7ac6 Signed-off-by:
	Matthias Blaicher <matthias@blaicher.com> Reviewed-on:
	http://openocd.zylin.com/917 Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk> Tested-by: jenkins Reviewed-by: Peter Stuge
	<peter@stuge.se>

2012-10-27  Matthias Blaicher <matthias@blaicher.com>

	* : rtos: Fix wrong allocation in linux_get_symbol_list_to_lookup linux_get_symbol_list_to_lookup allocates to few memory. On 64 bit
	systems the error did not show due to char* being twice its size,
	leaving accidentally enough space.  This patch makes linux_get_symbol_list_to_lookup behave identical to
	all other RTOS.  Change-Id: I290ea241fb20b65585c8be14609a92fdbd2a307d Signed-off-by:
	Matthias Blaicher <matthias@blaicher.com> Reviewed-on:
	http://openocd.zylin.com/934 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2012-10-18  Spencer Oliver <spen@spen-soft.co.uk>

	* : docs: mention extended-remote support Change-Id: Idd7cc0364856082cbbfee5015e49cd7d237d68ef Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/913 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2012-10-11  Spencer Oliver <spen@spen-soft.co.uk>

	* : gdb: fix extended-remote restart Seems versions of gdb > 6.8 require an W stop reply after receiving
	a kill packet.  Without this we receive the following error from gdb:
	gdb/thread.c:72: internal-error: inferior_thread: Assertion `tp'
	failed.  Change-Id: I86765a321f0429c9b517fe13ded0ee2dbd4b2f87 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/911 Tested-by: jenkins Reviewed-by: Joel
	Bodenmann <joel@unormal.org> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2012-10-06  Freddie Chopin <freddie.chopin@gmail.com>

	* : Fix serious bug in LPC2xxx/LPC17xx flash algorithm.  Flash algorithm for LPC17xx/LPC2xxx was trying to "reuse" previously
	allocated working area on next flashing which is not possible -
	working areas are freed automatically on reset. This caused all but
	first flashing attempts to fail. As there is no point in storing
	pointer to working area, it was converted to local variable.  Change-Id: I939946325ff9eecc4861c0f51ab0f73871a3d7b9 Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on:
	http://openocd.zylin.com/860 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-10-05  Matthias Blaicher <matthias@blaicher.com>

	* : rtos: Add ChibiOS/RT support This patch adds ChibiOS/RT support. This patch requires at least
	ChibiOS/RT development version starting from SVN revision 4734.  Note, that the Thread structures depend not only on the target but
	also on the ChibiOS configuration at build time.  To correct this
	ChibiOS includes a new "memory signature" which specifies the
	offsets.  Special thanks go to Peter Stuge and Spencer Oliver for their
	continous input and feedback to this patch.  Change-Id: I842bf7ba6c2309a4efe93d29ea6cd0784a8b22a3 Signed-off-by:
	Matthias Blaicher <matthias@blaicher.com> Reviewed-on:
	http://openocd.zylin.com/901 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2012-09-27  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: update stellaris flash data to latest dev package 9453 Change-Id: I16107a093d4ed7342583f5c32ad16aa98f81d122 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/856 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-05-17  Paul Fertser <fercerpav@gmail.com>

	* : rtos: support FreeRTOS over stlink Since stlink is a special case it presents the same CPU core under a
	different name, so copy the configuration to account for that.  Change-Id: I9febf79b388301bde6211d185b5b8161cdadb9ff Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/652 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-09-30  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : dsp5680xx_flash: Remove unused flash bank structure Change-Id: I947b6730b3741a71303e440daefa4fcf583cb9cf Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/867 Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-09-30  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : flash/nor/stellaris: Remove unnecessary write_algorithm check The pointer must be non-null here since we returned if allocation
	failed.  Change-Id: I9b75099ed3b3870c815d1df5760ed1f3fe1d20d6 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/866 Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-10-04  Spencer Oliver <spen@spen-soft.co.uk>

	* : readme: update missing configure args Change-Id: I495a4557f161290f8f99788de27958f7dc08d6f6 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/900 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-10-04  Peter Stuge <peter@stuge.se>

	* : rtos: Rewrite rtos_qsymbol() and fix auto-detect false positive Matthias Blaicher submitted a patch at
	http://openocd.zylin.com/#/c/891/ to fix the false positive; when no
	RTOS was detected OpenOCD used the last RTOS in the list.  While reviewing the code affected by Matthias' patch a rewrite
	seemed appropriate, to make the code readable.  Matthias has abandoned his change and this change also fixes the
	false positive.  Change-Id: Ic3327ccd036da52ba0a7e21ef93018205e74149c Signed-off-by:
	Peter Stuge <peter@stuge.se> Reviewed-on:
	http://openocd.zylin.com/895 Reviewed-by: Matthias Blaicher
	<matthias@blaicher.com> Tested-by: jenkins

2012-10-04  Peter Stuge <peter@stuge.se>

	* : rtos: Rewrite rtos_create() for readability The new code is almost functionally equivalent to the old; besides
	error handling the only difference is that the code is now readable.  Many thanks to Matthias Blaicher for pointing out an iteration error
	in the rtos_try_next() change, which also affected this change.  Change-Id: If38b87439e9de2303b220b3a7e3200ceaa8391da Signed-off-by:
	Peter Stuge <peter@stuge.se> Reviewed-on:
	http://openocd.zylin.com/893 Tested-by: jenkins Reviewed-by:
	Matthias Blaicher <matthias@blaicher.com>

2012-10-04  Spencer Oliver <spen@spen-soft.co.uk>

	* : build: fix broken ftd2xx bus blaster If configure is executed without --enable-ft2232_ftd2xx then the bus
	blaster or presto will fail to build with unresolved external
	ftd2xx_status_string.  Make sure we run the ftd2xx build test if
	--enable-usb_blaster_ftd2xx is enabled.  Change-Id: I09d270d6fcd083d77f6785b8969d9acb3dfef11d Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/892 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2012-09-26  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: cortino tested and working Change-Id: I13534742c76ebbb05b47bf98768c997068da747a Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/851 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-09-26  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: ftdi icdi enable srst open drain config Change-Id: I21a115121f167dc88cd9bf2d1ca1ac9f3e1110d7 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/848 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-09-25  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: lm3s811ek config tested and working Change-Id: I5402b5521d6e1ef0a569f5cad02c003681f5444b Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/847 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-09-25  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: stm32-performance stick config tested and working Change-Id: I9852d11e369e501af240a2b8e9f74306aee4e4a0 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/845 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-09-28  Spencer Oliver <spen@spen-soft.co.uk>

	* : docs: enable local structs in doxygen output Change-Id: I9c811d49690524f1ce5372326de67ec4ac7b09f4 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/858 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-09-26  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: add ti ek-lm3s9d92 config Change-Id: Ib09ca3e57de363a24d704b184ba8546bad08f56f Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/853 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-09-27  Spencer Oliver <spen@spen-soft.co.uk>

	* : sysfsgpio: remove ignoring return value build warning fixes following gcc warning: error: ignoring return value of write,
	declared with attribute warn_unused_result Change-Id: I96ea6649078449208a77690caea2cb237c388e6e Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/854 Tested-by: jenkins Reviewed-by: Marc
	Reilly <marc@cpdesign.com.au> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2012-09-26  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: add STM32F3-DISCOVERY board support Change-Id: I4a02e0504fc04ffc1238d9bb77ec05c1f781e7e8 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/810 Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com> Tested-by: jenkins

2012-09-26  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: fix incorrect str9-comstick reset config The str9-comstick uses a direct srst connection rather than via any
	buffer.  As a result this fixes issues with the newer ftdi driver.  Change-Id: I0968e8459997a6a2b7bf0c46e89662cd57b4f496 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/842 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-09-24  Spencer Oliver <spen@spen-soft.co.uk>

	* : ftdi: correct ftdi_initialize error text Change-Id: If230c0b5b3a18fd273106b743404079d0cbc9ddc Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/840 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-09-27  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: fix incorrect stm32f3 TAPID Change-Id: Id66d4e03a77c47a49086ee753bed01b3944064e1 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/855 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-08-22  Spencer Oliver <spen@spen-soft.co.uk>

	* : jtag: remove libftdi enum-compare warning See Trac #52 for details.  Change-Id: Idb509ead2b51bfcceeb00d0224a4d1c395b28a04 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/801 Tested-by: jenkins Reviewed-by: Olivier
	Schonken <olivier.schonken@gmail.com> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2012-08-16  George Harris <george@luminairecoffee.com>

	* : Added SPIFI flash driver, algorithms, and docs Added a flash driver designed to allow program/erase of
	memory-mapped SPI flash chips for LPC43xx/LPC18xx family micros.
	This driver includes three algorithms - erase, write, and SPIFI
	peripheral initialization (to allow memory-mapped access after a
	reset). The driver has been added to the flash driver table
	(drivers.c), and the OpenOCD documentation has been updated to
	include the flash driver configuration command.  Change-Id: I79f4ff8f1f07de4e5f2fe4f8c23aeb903f868514 Signed-off-by:
	George Harris <george@luminairecoffee.com> Reviewed-on:
	http://openocd.zylin.com/783 Tested-by: jenkins Reviewed-by:
	Aurelien Jacobs <aurel@gnuage.org> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2012-08-20  Marc Reilly <marc@cpdesign.com.au>

	* : drivers: new jtag bitbang driver using sysfs gpio This driver implements a bitbang jtag interface using gpio lines
	exported via sysfs.  The aim of this driver implementation is to use system GPIOs but to
	avoid the need for an additional kernel driver.  A config suitable for RaspberryPi is included.  Change-Id: Ib2acf720247a219768d1cbfeebd88057ed2d7b8b Signed-off-by:
	Marc Reilly <marc@cpdesign.com.au> Reviewed-on:
	http://openocd.zylin.com/762 Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk> Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-09-07  Freddie Chopin <freddie.chopin@gmail.com>

	* : The openocd-0.6.0 release.  Change-Id: I72eeabfc704d2a979ac0b4492771690631d2300f Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2012-09-02  Chuen Chou <zhouquan27@gmail.com>

	* : flash: fix sam3 page read/write address computation error In at91sam3.c for Atmel SAM3 flash support, there are arithmetic
	errors in the functions sam3_page_read() and sam3_page_write().
	Address locations are computed incorrectly due to an extra addition
	operation. This leads to memory locations being skipped during flash
	writes and reads.  Smaller programs are written successfully into flash, with memory
	gaps, while larger programs of legitimate size fail because the
	skipped memory is not utilized and therefore unavailable.  The changes address this condition, and have been tested with an
	Atmel SAM3X-EK evaluation board.  Change-Id: I9ea3b9ed0130b71cbc32b2294e31a6a2bc71b47a Signed-off-by:
	Chuen Chou <zhouquan27@gmail.com> Reviewed-on:
	http://openocd.zylin.com/806 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-09-05  Spencer Oliver <spen@spen-soft.co.uk>

	* : docs: add user mailing list and irc info Change-Id: I7000b5ab2967f8dc4cea8983978fce824ea1f98e Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/807 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-08-29  Freddie Chopin <freddie.chopin@gmail.com>

	* : Restore -dev tag.  Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com>

2012-08-25  Salvador Arroyo <sarroyofdez@yahoo.es>

	* : Pic32mx: make row programming work with any offset In function pic32mx_write_block() if the parameter offset is not a
	multiple of row size the row offset (offset % row_size) will be
	ignored by the flash controller, shifting the code to the beginning
	of the row.  Word programming gets it right.  Change-Id: I134913e3d533688f791bbcb0c6e8983524197f3c Signed-off-by:
	Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on:
	http://openocd.zylin.com/796 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2012-08-28  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: fix typo Change-Id: I5fe7b695b00faef966e7621614bbd60b6e694a4f Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/800 Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2012-08-23  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : ftdi: fix overflow if last field of a scan is empty The last bit of a scan is clocked during TAP movement so it's
	necessary for the last field to have at least one bit. Strip
	trailing empty fields and make sure the TAP is not affected if
	there's nothing to scan. Clients probably shouldn't add empty fields
	so add a debug message to be able to track and fix them.  Change-Id: I27552568bc11146570b9b99ed8a1ae81b5fb2c50 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/794 Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk> Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-08-28  Spencer Oliver <spen@spen-soft.co.uk>

	* : adapter: remove superfluous line breaks Change-Id: I8e68b9d6f571ef7715a2f4cad0aa78fe4e3b48e8 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/798 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-08-17  Freddie Chopin <freddie.chopin@gmail.com>

	* : Update NEWS Added some missing items to NEWS file prior to final 0.6.0 release.  Change-Id: I69255c85fa8f4b6f06eae7c56f78072e3ec2d6f8 Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on:
	http://openocd.zylin.com/784 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-08-17  Freddie Chopin <freddie.chopin@gmail.com>

	* : Add another scripts search path for Windows builds Add single "scripts" folder to search path for Windows OpenOCD
	builds that don't use cygwin bin/openocd.exe
	scripts/interface/dummy.cfg scripts/target/at91eb40a.cfg Do some refactoring of current code (thx to Andreas).  Change-Id: Idbb08d1368b06f25da44f4f9ab1511db992b1724 Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com> Signed-off-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/785 Tested-by: jenkins

2012-07-07  Christopher Kilgour <techie@whiterocker.com>

	* : kinetis: ensure flash writes are not truncated The number if longwords or "sections" (Freescale term) written for a
	Kinetis flash write (4, 8, or 16 bytes depending on the part
	density/granularity) are now rounded up to ensure there are no
	truncations when the desired write is not a multiple of the minimum
	write size.  Change-Id: I8db40a8769d8ac5393a46cbf4e5ff0df82faf916 Signed-off-by:
	Christopher Kilgour <techie@whiterocker.com> Reviewed-on:
	http://openocd.zylin.com/738 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-08-22  Salvador Arroyo <sarroyofdez@yahoo.es>

	* : Patch: Make pic32mx unlock work at higher scan frequencies For example in a pic32mx220, pic32mx unlock don't work if
	adapter_khz is set to 5000 or more.  A short delay after asserting reset fix the problem.  Change-Id: I62e493edfcea585c36c8de77a969cebac7227b96 Signed-off-by:
	Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on:
	http://openocd.zylin.com/790 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-08-23  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: stlink_interface_init_target use hex prefix Change-Id: I782da74687bcf111c1f04c53b2c1120d6a034441 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/791 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-08-05  Salvador Arroyo <sarroyofdez@yahoo.es>

	* : Severe bug in Pracc code The function  wait_for_pracc_rw() fails if Pracc bit is 0.  The
	variable ejtag_ctrl is loaded with the content of the control
	register in the first scan.  In the second scan Pracc bit is scanned
	out as 0, letting the proccesor go. The result is unpredictable.  All the strange data corruption when scanning at certain
	frequencies, or the strange delays needed when entering or leaving
	fasdata area are retated to this bug.  Now the code works at any scan frequency, tested up to 15000Khz and
	indepently of processor speed, tested at 31.25Khz and 4/8Mhz.  Change-Id: Iedfd81d06d6af4bc738a521f720e42323025b268 Signed-off-by:
	Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on:
	http://openocd.zylin.com/769 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-08-14  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : cfi: fix type-punning warnings in cfi_spansion_write_block Retest the condition when needed, instead of abusing the
	common_magic field as a flag. There are only two options here.
	Either it's an armv7m or it's another arm. is_arm(...) will return
	true even for armv7m, so it's imperative to check in the right
	order.  Change-Id: Ic227f19f7babf1b0b0fe075f9a3abc4eabc7d5f1 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/779 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2012-08-13  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: catch dap_lookup read error Issue found by clang-3.1 Change-Id: I2e922ec83117e75db5bec1e82edaa75a9e6e7464 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/778 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-08-13  Spencer Oliver <spen@spen-soft.co.uk>

	* : tcl: fix potential memory leaks Reorder to allocate all memory after COMMAND_PARSE_NUMBER call.
	This removes a clang warning about un-released memory Change-Id: I8dbeb664a6467077157015bd879bc0aefc5e8614 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/776 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-08-10  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: fix FC_FLEX_RAM class code path If the flash class was defined as FC_FLEX_RAM then this would always
	drop through to the default handler.  This bug was found by clang, so untested.  Change-Id: I2d9fe6415dd216728a145519400f7b9ef1bd3c3a Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/773 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com> Reviewed-by: Mathias Küster
	<kesmtp@freenet.de>

2012-08-07  Aurelien Jacobs <aurel@gnuage.org>

	* : ftdi: Olimex ARM-USB-TINY validated Flashing a CFI flash and debugging with gdb work fine.  Change-Id: Ib2578ee6f41c1003968198439033d00d805122f7 Signed-off-by:
	Aurelien Jacobs <aurel@gnuage.org> Reviewed-on:
	http://openocd.zylin.com/770 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2012-08-14  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: remove duplicate Olimex ARM-USB-OCD config This file is already included as olimex-arm-usb-ocd.cfg.  Change-Id: I0e66977c58e74ac93a0dc3a0c88a5e5af4992f8b Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/780 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2012-08-02  Freddie Chopin <freddie.chopin@gmail.com>

	* : Restore "-dev" tag.  Change-Id: Ibb7669ea73872d75a5c2f32f2264e57b1d0f20c7 Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com>

2012-08-02  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: add valid smp target check Check that the target is valid before calling any target functions.  Change-Id: I538fccc79d5ec89976e14beab02cb20490b299bb Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/766 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-08-02  Freddie Chopin <freddie.chopin@gmail.com>

	* : Add missing files (header and .txt) for release.  make distcheck is used to make packages with OpenOCD release, this
	command uses information from Makefile.am files to know which files
	should be included in the package and which can be left only in
	repository. This patch makes a few headers from recent JTAG drivers
	and one txt file with info about target tcl config files included in
	released packages.  Change-Id: I91202290633a30f53624a8c7d9a0ebf72c40772b Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on:
	http://openocd.zylin.com/767 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-06-08  Alexander Osipenko <sipych@gmail.com>

	* : arm946e: cp15 command returns value to the script Not just print it.  This enables scripts to analyze valuable config options of arm946e-s
	cores, do internal BIST memory tests and more.  Be careful to flush caches before disabling it.  Do not forget that
	BIST test overwrites  memory.   - cp15 rewritten from COMMAND_HANDLER to jim_handler.  Change-Id: I734da0be6db0a3127c2daa94ed75efef94da8ceb Signed-off-by:
	Alexander Osipenko <sipych@gmail.com> Reviewed-on:
	http://openocd.zylin.com/694 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-07-31  Alexander Osipenko <sipych@gmail.com>

	* : arm946e: don't use global variables for context Global variables 'dc' 'ic' had been used in the code to keep
	target's state of D-cache and I-cache on debug entry.  This may lead to incorrect operation in configurations with multiple
	cores and unequal cache states.  Fix: move cache state to the appropriate bits of the
	'cp15_control_reg' field (already present but unused).  Vaule of
	cp15 control register stored here on arm946e_post_debug_entry(), and
	analyzed later in arm946e_write_memory().  Change-Id: I71ef82be00c21d6fffb3726cec4974d1ece70dfe Signed-off-by:
	Alexander Osipenko <sipych@gmail.com> Reviewed-on:
	http://openocd.zylin.com/692 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-07-25  Joerg Fischer <turboj@gmx.de>

	* : cfg: Add Hitex LPC1768-Stick using ftdi driver Add cfg files for Hitex LPC1768 Stick Website:
	http://www.hitex.com/?id=1602 This board has a FTDI2232D as JTAG interface, using the same layout
	as the Hitex STM32-PerformanceStick but with different USB PID.  Main MCU is a LPC1768 from NXP.  The interface config uses the ftdi driver instead of ft2232.  The
	corresponding ft2232 layout would be "stm32stick".  Change-Id: I1fd15588c5af35f7d51777d1ad958cc1dc72c6f7 Signed-off-by:
	Joerg Fischer <turboj@gmx.de> Reviewed-on:
	http://openocd.zylin.com/763 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-07-19  Freddie Chopin <freddie.chopin@gmail.com>

	* : cfg: Add config file variants using the ftdi driver instead of
	ft2232 part 4 - files that are currently untested Change-Id: Ic4a08fdefc99e7a9d50885c888c3fca60ffa39bd Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on:
	http://openocd.zylin.com/750 Tested-by: jenkins

2012-07-20  Freddie Chopin <freddie.chopin@gmail.com>

	* : cfg: Add config file variants using the ftdi driver instead of
	ft2232 part 2 - files that are currently untested but assumed to work, as
	other configs using the same layout work fine Change-Id: Ifaa1904227ebdc394362ccaf3ad3c5384a716657 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on:
	http://openocd.zylin.com/754 Tested-by: jenkins

2012-07-19  Spencer Oliver <spen@spen-soft.co.uk>

	* : telnet: cleanup comments seems comments were mangled during the last cleanup.  Change-Id: If759f62032705c7baffd3973e9717eb7e8a5d17c Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/752 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-06-07  Salvador Arroyo <sarroyofdez@yahoo.es>

	* : Bugfixes in mips32_pracc.c When testing a pic32mx220f032b with different values for adapter_khz
	and cpu clocks i was getting a lot of corrupted data from the chip.
	From time to time openocd fails with segmentation faults or is
	aborted due to memory corruption.  Change-Id: I134743f75c477b3d55dc74ae4474598e153b4a4a Signed-off-by:
	Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on:
	http://openocd.zylin.com/690 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-07-17  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : flash: reduce code duplication in stm32 flash probe Remove a lot of the repetitive code in stm32f1x flash probe by
	converting the large if-selector to a switch, moving the common
	checks outside it and concentrating the failure handling to a single
	point.  Do the same with stm32f2x and stm32lx for consistency.  Change-Id: Ic0ecfb1533c49f5d2108cda5fd20c8372d7c71ef Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/746 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2012-07-12  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: handle zero when reading stm32 flash size reg Some variants read 0 for the flash size register, rather than
	failing lets assume we have max flash fitted.  Change-Id: Ie1fb4e73606f49268a6fd5921c3aef75bc4790d3 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/744 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-07-12  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: add stm32l Revision X support Revision X is not mentioned in the latest RM0038 rev5, however it
	has been confirmed correct by ST using ST-LINK Utilty.  Change-Id: I65210e512ea25818a1d0d3b223502ebd7535b29d Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/742 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-07-11  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : cfg: remove deprecated stm32 target configs These were deprecated in commit 69ac20a.  Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
	Change-Id: I047872f8cd61b42aaca6588ab75566219e4a3f5d Reviewed-on:
	http://openocd.zylin.com/741 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2012-07-11  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : flash: don't write to FLASH_CR in stm32x_write_block It's unnecessary and prevents reusing this function to fix option
	byte writes.  Also try to disable flash writing after an error.  Change-Id: Ib5a7b768a1523e6b8da1555126fef4c1e60ab083 Signed-off-by:
	Szymon Modzelewski <szmodzelewski@gmail.com> Signed-off-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/479 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-07-20  Alex Austin <alex.austin@spectrumdsi.com>

	* : Revert "When calling openocd from a shell like this:" This reverts commit e8641695c634109ebf5f1149923971770da1d28a Original premise was wrong. Proper command is "shutdown", not
	"exit".  Change-Id: I07f5fe0dda9c24abe53628da986bfda0e406bb4a Signed-off-by:
	Alex Austin <alex.austin@spectrumdsi.com> Reviewed-on:
	http://openocd.zylin.com/757 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2012-07-17  Freddie Chopin <freddie.chopin@gmail.com>

	* : Add config file for Lattice LC4032ZE CPLD (ispMACH 4000ZE
	family) Change-Id: Iefec12b30ff737317c454b472200fd7e7edde619 Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on:
	http://openocd.zylin.com/748 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2012-01-30  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : Add FTDI JTAG driver using MPSSE layer Based on ft2232.c but uses the MPSSE layer for low-level access,
	greatly simplifying the JTAG logic. Remove all libftdi/FTD2XX code
	and all layout specific code. Layout specifications are instead
	handled in Tcl.  Use a signal abstraction to enable Tcl configuration files to define
	outputs for one or several FTDI GPIO. These outputs can then be
	controlled using the ftdi_set_signal command. Special signal names
	are reserved for nTRST, nSRST and LED (for blink) so that they, if
	defined, will be used for their customary purpose.  Depending on the type of buffer attached to the FTDI GPIO, the
	outputs have to be controlled differently. In order to support
	tristateable signals such as nSRST, both a data GPIO and an
	output-enable GPIO can be specified for each signal. The following
	output buffer configurations are supported: * Push-pull with one FTDI output as (non-)inverted data line * Open drain with one FTDI output as (non-)inverted output-enable * Tristate with one FTDI output as (non-)inverted data line and
	  another FTDI output as (non-)inverted output-enable * Unbuffered, using the FTDI GPIO as a tristate output directly by   switching data and direction as necessary The data and output-enables are specified as 16-bit bitmasks,
	corresponding to the concatenation of the high and low FTDI GPIO
	registers. To specify an unbuffered output, use the same bitmask for
	both data and output-enable.  The adapter configuration file must also specify default values for
	the FTDI data and direction GPIO registers, and the channel being
	used (if different from 0).  Change-Id: I287a41d4c696cf5fc74eb10d5e63578b0dc7f826 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/452 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2012-06-27  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: Cortex-M use consistent arm dap access Purely cosmetic but use the same style as Cortex-A target, this
	makes searching refs easier.  Change-Id: I732ad9701f561e2312c5d191f5aaffd3a2f2393d Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/731 Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2012-07-04  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: add stm32f3x support add support for the new stm32f3x family from stmicro:
	http://www.st.com/stm32f3 Change-Id: Icd1db95bb2767d9c0ecef24deefa92b4fdaa4f14 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/735 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2012-06-27  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: detect correct Cortex-M tar auto increment size The ADIv5 spec guarentees that tar_autoincr_block will be 10bits.
	Make this the default for Cortex-M family until we detect a
	Cortex-M3/M4, we then change autoincrement to 12bits.  Change-Id: Ie8c89134aa036879bdd8a3c312cee9715dbc6913 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/730 Tested-by: jenkins Reviewed-by: simon
	qian <simonqian.openocd@gmail.com> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2012-02-18  Stian Skjelsad <stian@nixia.no>

	* : When calling openocd from a shell like this: openocd -f board/sheevaplug.cfg -c init -c exit the calling shell will believe that openocd exited with an error due
	to exitval will be non-zero This is not tested against incomming telnet Change-Id: I63d15715a7b46f39a7de261a45039f8c3cad7a98 Signed-off-by:
	Stian Skjelstad <stian@nixia.no> Reviewed-on:
	http://openocd.zylin.com/470 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk> Reviewed-by: Bill Traynor
	<wmat@alphatroop.com> Reviewed-by: Mathias Küster
	<kesmtp@freenet.de> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2012-05-24  Vandra Akos <axos88@gmail.com>

	* : target/target.c, jim_target_md refractored  - Added a few lines of comment before the function explaining the
	 usage and the output generated by the command  - Added a few lines of comment in the body explaining what is
	 happening to improve code readability  - Renamed a few variables to improve readability:     * a -> addr     * b -> dwidth     * c -> count  - Added a new variable, named byte to contain the number of bytes
	 to read, instead of overwriting the count parameter, to avoid
	confusion between the two values.  Change-Id: I5828ec0f5aadaa39becec7b84f198756bb2c3d41 Signed-off-by:
	Vandra Akos <axos88@gmail.com> Reviewed-on:
	http://openocd.zylin.com/665 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-05-29  Mike Crowe <mpcrowe@gmail.com>

	* : topic: flash: description/id added for ATSAM3SD8C New flash description for ATSAM3SD8C used on SAM3S-EK2 development
	boards.  Name used is "at91sam3sd8c" and chipid is 0x29ab0a60.
	Mirrors description of other similar parts.  Change-Id: I7fc4b82e7969451645ab067223663f08b76d866b Signed-off-by:
	Mike Crowe <mpcrowe@gmail.com> Reviewed-on:
	http://openocd.zylin.com/684 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-06-04  Olivier Schonken <olivier.schonken@gmail.com>

	* : Changed SAM4S Erase for effective Sector erase In the previous iteration, the page counter for erases would not be
	updated with the erase size.  This patch keeps the page counter
	synced with the sector counter.  Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
	Change-Id: I95e56a3257b2ad8301c9f28167b842fa6466334f Reviewed-on:
	http://openocd.zylin.com/686 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-05-23  Christopher Kilgour <techie@whiterocker.com>

	* : kinetis: update support for all program flash granularities Updates the Kinetis NOR flash support to handle all known block and
	sector sizes.  Previously only 2kiB sectors were hard-coded, now all
	four known combinations non-volatile sector sizes are supported.  The premise of separating Kinetis Program Flash (PFLASH) from
	FlexNVM is also introduced.  This means each "block" of flash (in
	Freescale terms) is treated as a bank in OpenOCD.  Correspondingly,
	the existing board configuration for the TWR-K60M512 eval system is
	updated to recognize two banks instead of one.  A board config for the TWR-K60F120M is also added.  Bank and sector erase and programming has been checked with both of
	the mentioned eval boards.  Change-Id: Iae2d10ebf8f548d0a3698df5430bbbe1ccadc58a Signed-off-by:
	Christopher Kilgour <techie@whiterocker.com> Reviewed-on:
	http://openocd.zylin.com/663 Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de> Reviewed-by: Jan Dakinevich
	<jan.dakinevich@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2012-05-28  Alexander Osipenko <sipych@gmail.com>

	* : JLink: added jlink_usb_io() function jlink_usb_io() function added for basic communication, since
	jlink_usb_message() is more specific to JTAG transactions.  To verify the patch issue "jlink config" command.  Change-Id: Id7d10bd5e8985d4c77f2e0ca47fb6033db2877bf Signed-off-by:
	Alexander Osipenko <sipych@gmail.com> Reviewed-on:
	http://openocd.zylin.com/679 Tested-by: jenkins Reviewed-by: Xiaofan
	<xiaofanc@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2012-05-29  Liviu Ionescu <ilg@livius.net>

	* : docs: J-Link commands added to the manual The J-Link related commands and configuration commands were added to
	the "8.2 Interface Drivers" section of the manual.  (previously they
	were enumerated as comments).  The 'jlink pid' was marked as Config
	all other as Command.  A draft of a compatibility note was added,
	but probably a table would be more appropriate.  Change-Id: Ifbe230706815196aaad4e3729ed5089d5088b769 Signed-off-by:
	Liviu Ionescu <ilg@livius.net> Reviewed-on:
	http://openocd.zylin.com/680 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-06-22  Mirela Tauciuc <mirela.tauciuc@gmail.com>

	* : AT91SAM7 Flash: fixed redundant assignation warning Change-Id: Iffacdce9ce90c4ea7e0c8647860a0056b952f387 Signed-off-by:
	Mirela Tauciuc <mirela.tauciuc@gmail.com> Reviewed-on:
	http://openocd.zylin.com/691 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2012-05-29  Spencer Oliver <spen@spen-soft.co.uk>

	* : docs: update interface support in README Change-Id: Id4b982ee426dedc85b643a71c1cdba67d0dd0ffd Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/682 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2012-05-25  Spencer Oliver <spen@spen-soft.co.uk>

	* : build: remove src file execute permission Change-Id: I42a250cdfcd03424a63cd1a255f9cf4a3c6e3ccd Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/671 Reviewed-by: Xiaofan
	<xiaofanc@gmail.com>

2012-05-23  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: fix segfault in arm7_9 8/16bit read Seems I5347352e7595686634bd0de13fcf6de6e55027b0 introduced an issue
	when reading 8/16 bit data - the in buffer was always set to 32bits.  Change-Id: Ife2bb6a20fcb3ec0e486655512164f25ae9196b4 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/660 Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de>

2012-05-09  Mathias K <kesmtp@freenet.de>

	* : board: Add Sony Ericsson J100I Phone This patch add the Sony Ericsson J100I Phone to the board
	configurations.  Change-Id: I083ddf067c8ecdfdda0404fe9e9df980dbb86fe8 Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/631 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-05-22  Bill Traynor <wmat@alphatroop.com>

	* : jtag: fix osbdm.c typo Fixing up tiny spelling error of "receive" vs. "recieve".  Change-Id: Ib143d7fdb24ac1f2b7bd4ae90cadaf2e12760ff7 Signed-off-by:
	Bill Traynor <wmat@alphatroop.com> Reviewed-on:
	http://openocd.zylin.com/659 Tested-by: jenkins Reviewed-by: Xiaofan
	<xiaofanc@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>

2012-05-22  Spencer Oliver <spen@spen-soft.co.uk>

	* : jtag: remove opendous clang warnings Change-Id: I0285c99507931e7d13aad36f4fc559c29a52faca Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/655 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2012-05-21  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: target.h typo and comment cleanup Change-Id: Ib751803754672bf556f4f65bd3f5621f6bbb7f0c Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/654 Tested-by: jenkins Reviewed-by: Bill
	Traynor <wmat@alphatroop.com>

2012-05-14  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: enable TARGET_EVENT_RESUME_* events Change-Id: I7d8378f9f34c6674db8c8b29d1a961389578e921 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/640 Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Bill
	Traynor <wmat@alphatroop.com>

2012-05-10  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: remove duplicate target events Change-Id: Iba9ae441f3e6d48a7dfafe59ed093fef56a34723 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/633 Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Bill
	Traynor <wmat@alphatroop.com>

2012-05-15  Bill Traynor <wmat@alphatroop.com>

	* : UserGuide: Updated list of supported interfaces, boards, and
	targets.  User Guide: Chapter 6 'Config File Guidelines'.  The directory
	listings of interfaces, boards, and targets has been brought up to
	date.  Change-Id: I53f218a94cb81c5e90298b367259e833192af5f3 Signed-off-by:
	Bill Traynor <wmat@alphatroop.com> Reviewed-on:
	http://openocd.zylin.com/646 Tested-by: jenkins Reviewed-by: Xiaofan
	<xiaofanc@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2012-05-14  Spencer Oliver <spen@spen-soft.co.uk>

	* : NEWS: add headline items Change-Id: Ie78b0a171af76cf647deef501245caf54209d9f8 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/639 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com> Reviewed-by: Xiaofan
	<xiaofanc@gmail.com>

2012-05-17  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: add myself to copyright header Change-Id: I39e23b38ee630b80bccb5ff6b5819efa0fcb120a Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/651 Tested-by: jenkins Reviewed-by: Xiaofan
	<xiaofanc@gmail.com>

2012-05-15  Spencer Oliver <spen@spen-soft.co.uk>

	* : contrib: enable cortex-m0 and cortex-m4 libdcc support Change-Id: Ib8ff645d1e5b8baca02de8ea95b629d88b203969 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/644 Tested-by: jenkins

2012-05-17  Alexander Osipenko <sipych@gmail.com>

	* : remote_bitbang: missed closing brace in macro
	REMOTE_BITBANG_RAISE_ERROR Change-Id: I591308bd98810ef6361106c207c55b83c3a83890 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/647 Tested-by: jenkins Reviewed-by: Xiaofan
	<xiaofanc@gmail.com>

2012-05-14  Spencer Oliver <spen@spen-soft.co.uk>

	* : docs: add initial target rtos support info Change-Id: Idd39ce17922602aedd4626496ed8f5422bb76e07 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/641 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2012-05-11  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: add armv7m stlink handling This enables us to better handle some of the low level functions
	that the stlink does not support. It also enables us to share a few
	more of the standard cortex_m3 functions if necessary.  Change-Id: I7a2c57450122012ec189245d8879d8967913e00e Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/637 Tested-by: jenkins

2012-05-03  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: fix protect check for pic32mx1x/2x family Change-Id: Ib2692d8b79e52cd40f429008047494aa7f552984 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/612 Tested-by: jenkins Reviewed-by: Xiaofan
	<xiaofanc@gmail.com>

2012-05-08  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: fix stlink api2 single step This makes the newer v2 api behave as per the v1 api, eg. single
	stepping masks all interrupts.  A better long term solution is to use same behaviour as a cortex-m3
	target, see CORTEX_M3_ISRMASK_AUTO.  Change-Id: Iaf9f9adf225cf274faaac938050bb996582aa98f Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/621 Tested-by: jenkins

2012-05-04  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: stlink/v1 use v2 api if supported The api v2 is supported on the stlink/v1 if it has a least v11
	firmware.  Change-Id: Idfdb5a7f5a5881326017451ae9b6004eeaa46a96 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/616 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com> Reviewed-by: Xiaofan
	<xiaofanc@gmail.com>

2012-05-01  Freddie Chopin <freddie.chopin@gmail.com>

	* : Use hardware reset and connect under reset on boards with
	ST-LINK/V2, as now it is supported.  Change-Id: Id3b2ca9a2270974a5f453323f9057ecece400c94 Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on:
	http://openocd.zylin.com/609 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-05-01  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: support connecting under reset Some targets support connecting while the target's srst is asserted.
	Tested on stm32 family.  Change-Id: I1197dd721a1e1cbf95ee77dfd8e1082b165b22a9 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/607 Tested-by: jenkins

2012-05-08  Aurelien Jacobs <aurel@gnuage.org>

	* : cfi: fix write_bank segfault with spansion flash on armv7m cfi_spansion_write_block() passes an arm_algorithm struct to
	target_run_algorithm() which in turn calls armv7m_start_algorithm()
	which expect an armv7m_algorithm struct.  As armv7m_algorithm is
	bigger than arm_algorithm, when armv7m_start_algorithm() writes in
	the struct, it overrun the buffer, writting junk on the stack, which
	latter on generates a segfault.  This patch ensure we use a properly sized armv7m_algorithm struct
	when the target is an armv7m.  Change-Id: I4ab67c15ae4bb72454414a81b92a4231dcdb2239 Signed-off-by:
	Aurelien Jacobs <aurel@gnuage.org> Reviewed-on:
	http://openocd.zylin.com/623 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-05-03  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfi: check supported arch check that the cfi driver supports the current target arch.  Change-Id: I8a95908684de67bf1657d1956f2573662a641cc1 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/614 Tested-by: jenkins Reviewed-by:
	Aurelien Jacobs <aurel@gnuage.org>

2012-05-01  Spencer Oliver <spen@spen-soft.co.uk>

	* : build: add missing erase_check loader src Change-Id: I1534c1ea1606fda9eb6ffa6a11a708f8c8a3d46a Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/605 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-05-11  Spencer Oliver <spen@spen-soft.co.uk>

	* : contrib: fix Neo1973 udev permission typo Change-Id: I6d5ad0cc28e0cb52104ead9e974b8b1ed92d9cdc Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/636 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2012-04-30  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: increase stm32f0discovery board working area Change-Id: Iea166ee27fc60bbfdeb851fdcf71509f3984f72f Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/602 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-05-08  Bill Traynor <wmat@alphatroop.com>

	* : cfg: Deleted duplicate busblaster.cfg and renamed original.  The busblaster.cfg was contributed on April 23, 2012 and is a
	duplicate of dp_busblaster.cfg that was contributed on Oct. 23,
	2011.  Therefore, deleting the second version.  Also, renaming the
	original dp_busblaster.cfg to simply busblaster.cfg, as this name is
	more concise.  Change-Id: Iccb1f10f53dbbb248b1ff4c6295eaf67c32247c1 Signed-off-by:
	Bill Traynor <wmat@alphatroop.com> Reviewed-on:
	http://openocd.zylin.com/622 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2012-05-07  Bill Traynor <wmat@alphatroop.com>

	* : cfg: add default pid/vid pair to beaglebone board cfg.  The newer versions of BeagleBone boards use the default vid/pid pair
	for FT2232 debugging.  Please see the following README:
	http://beagleboard.org/static/beaglebone/latest/README.htm On
	 revision A3/A4 boards, the VID/PID were chosen to match the TI
	 XDS100v2 (0x0403/0xA6D0). On A5 and newer revisions when we've given
	the authors of CCS the chance to update their software, the generic
	FTDI VID/PID (0x0403/0x6010) will be used to simplify installation
	of drivers for systems already having those drivers.  Change-Id: I44228eb2029162f23d084eb05bcfef39e615668d Signed-off-by:
	Bill Traynor <wmat@alphatroop.com> Reviewed-on:
	http://openocd.zylin.com/619 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2012-04-27  Spencer Oliver <spen@spen-soft.co.uk>

	* : build: remove clang unused variable increments warnings Change-Id: Ib755474aa46f7233495fae1947bc27cd0b2d6b4f Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/599 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-04-27  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: allow stm32discovery parameter override This enable the user or board config to override the parameters
	passed to stm32_stlink.cfg.  Required to fix a incorrect working area bug with the
	stm32vldiscovery.  Change-Id: I40a4f7913ff37d577d44b1f23befccf0317080a1 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/597 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com>

2012-04-19  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: support srst reset This adds the ability to support srst reset for the stlink/v2.
	stlink/v1 will fallback to using SYSRESETREQ which is a full reset -
	including peripherals.  To enable the use of the srst add the following to your cfg:
	reset_config srst_only Change-Id: I570de607c5f370fd6a4abf47360686c9be07bcdd Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/581 Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2012-04-19  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: add hardware srst functions to stlink/v2 Change-Id: Ib82b6a1116b9f396f1933cc5526733334254fd62 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/579 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com> Reviewed-by: Mathias Küster
	<kesmtp@freenet.de>

2012-04-19  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: default to latest api available Change-Id: Ic04128f4020055587bb87250f41e5c804d9c2b01 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/577 Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2012-04-05  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: support stlink api result The stlink api does support results for some functions - add
	support.  Change-Id: I39cb495408c46af8bc343b198a1e0bd4c7aee6d8 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/560 Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2012-03-18  Olivier Schonken <olivier.schonken@gmail.com>

	* : topic: Added support for the SAM4S variants Atmel introduced 6 new Cortex-M4 processors on 2011-10-26 SAM4S16C -
	1024KB flash LQFP100/BGA100 SAM4S16B - 1024KB flash LQFP64/QFN64
	SAM4S16A - 1024KB flash LQFP48/QFN48 SAM4S8C - 512KB flash
	LQFP100/BGA100 SAM4S8B - 512KB flash LQFP64/QFN64 SAM4S8A - 512KB
	flash LQFP48/QFN48 The SAM4S processors still suffer from the "6 waitstates needed to
	program device" errata.  Other relevant changes are: 1. Address of flash memory starts at 0x400000.  2. EWP (Erase page and write page) only works for the first two 8KB
	"sectors" 3. Because of the EWP not working for all the sectors, normal page
	writes have to be used.  The default_flash_blank_check is used to
	check if lockregions should be erased.  4. The EA (Erase All) command takes 7.3s to complete. (Previous
	timeout was 500 ms) 5. There are 128 lockable regions of 8KB each.  Implemented default blank checking, and page erase for load_image
	scenarios.  This is to compensate for the EWP flash commands only
	working on the first 2 8KB sectors.  Change-Id: I7c5a52b177f7849a107611fd0f635fc416cfb724 Signed-off-by:
	Olivier Schonken <olivier.schonken@gmail.com> Reviewed-on:
	http://openocd.zylin.com/528 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-04-24  Linus Tolke <linus@tigris.org>

	* : topic: Ignored TAGS files.  Allow use of TAGS.  Change-Id: I5e71e8986671642b49cc9a62d37cc8c0dfa37181 Signed-off-by:
	Linus Tolke <linus@tigris.org> Reviewed-on:
	http://openocd.zylin.com/595 Reviewed-by: Peter Stuge
	<peter@stuge.se> Tested-by: jenkins

2012-04-22  Bill Traynor <wmat@alphatroop.com>

	* : UserGuide: Fixing link to USBprog tool.  In section '2.8 USB Other' updated the link to the USBprog tool:
	http://shop.embedded-projects.net/ Change-Id: I7fa453934ac6a7889e01b22b7e0cb07f42ee168d Signed-off-by:
	Bill Traynor <wmat@alphatroop.com> Reviewed-on:
	http://openocd.zylin.com/591 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-04-22  Bill Traynor <wmat@alphatroop.com>

	* : UserGuide: Fixed link to Wiggler2 project.  In section '2.9 IBM PC Parallel Printer Port based' fixed link to
	the Wiggler2 project and removed the alternate URL text to retain
	style consistency with the other URLs in the document:
	http://www.ccac.rwth-aachen.de/~michaels/index.php/hardware/armjtag Change-Id: I879db1c6eaf683ca6475a0f466f987087c9d60d0 Signed-off-by:
	Bill Traynor <wmat@alphatroop.com> Reviewed-on:
	http://openocd.zylin.com/593 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-04-22  Bill Traynor <wmat@alphatroop.com>

	* : UserGuide: Fixing two typos.  In Section 2.7 USB ST-LINK based made these two changes: "they only
	works with" to "they only work with" "following method's" to
	"following methods" Change-Id: Idfe6c11c3fa6f2157d01697cd7f480a9d495c8e2 Signed-off-by:
	Bill Traynor <wmat@alphatroop.com> Reviewed-on:
	http://openocd.zylin.com/590 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-04-15  Uwe Hermann <uwe@hermann-uwe.de>

	* : Split olimex_stm32_h107.cfg.  Use one board file per eval board, so that the filename matches the
	exact board the user has / wants to use. Merging different boards
	into one file is confusing.  Change-Id: I7c50233924a87a913723d7215c4851039c2971bc Signed-off-by:
	Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on:
	http://openocd.zylin.com/566 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-04-19  Bill Traynor <wmat@alphatroop.com>

	* : UserGuide: Update Section 2.3 USB FT2232 Based Updated the link for the usbjtag project to the correct URL:

	http://elk.informatik.fh-augsburg.de/hhweb/doc/openocd/usbjtag/usbjtag.htmlAdded a NOTE to indicate the axm0432_jtag as no longer being
	available from the axman.com page.  Change-Id: I70727303dad58d9dc0c5f9b7cce219288b762042 Signed-off-by:
	Bill Traynor <wmat@alphatroop.com> Reviewed-on:
	http://openocd.zylin.com/583 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-04-19  Bill Traynor <wmat@alphatroop.com>

	* : UserGuide: Fixed link to USB-JTAG project.  Updated the URL to Kolja Waschk's USB-Blaster compatible adapter:
	http://ixo-jtag.sourceforge.net/ Change-Id: If9d2875b5ba5d3bfaaf524cd253a5fab53e05371 Signed-off-by:
	Bill Traynor <wmat@alphatroop.com> Reviewed-on:
	http://openocd.zylin.com/585 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-04-18  Bill Traynor <wmat@alphatroop.com>

	* : HACKING: Fix instruction for git pull --rebase When following the Patch Guidelines step by step, an error occurs at
	step 6.  "git pull --rebase origin/master" results in the error: fatal: 'origin/master' does not appear to be a git repository Removing the / seems to fix this.  Change-Id: I4e2fa23c60654abeaebd3b25a8c8375aa07b0abd Signed-off-by:
	Bill Traynor <wmat@alphatroop.com> Signed-off-by: Peter Stuge
	<peter@stuge.se> Reviewed-on: http://openocd.zylin.com/574
	Reviewed-by: David Anders <danders.dev@gmail.com> Tested-by: jenkins

2012-04-18  David Anders <danders.dev@gmail.com>

	* : pandaboard: add initial TCL support for pandaboard-es add initial TCL support for the pandaboard-es which is based on the
	omap4460 from Texas Instruments.  Change-Id: Ic63588721487feb95e7cb3d41cfaab0d2f181766 Signed-off-by:
	David Anders <danders.dev@gmail.com> Reviewed-on:
	http://openocd.zylin.com/573 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2012-04-18  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: add stm32f0discovery board config Change-Id: I4fccdbd4e0a3bc70cd425c910ad1007519098e20 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/570 Reviewed-by: Peter Stuge
	<peter@stuge.se> Tested-by: jenkins

2012-04-05  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: correctly format printed hex addresses Change-Id: I4a139989927249bb5e9dcc4804965c85c37cc09b Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/559 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2012-04-04  Stephane Bonnet <bonnetst@hds.utc.fr>

	* : ft2232: Support for Digilent HS1 USB adapter * Added support to the FT2232 driver for the FT2232H-based   Digilent HS1 adapter.  Change-Id: Iab6cc15f299badaf115615b5d4d785ecb2273c27 Signed-off-by:
	Stephane Bonnet <bonnetst@hds.utc.fr> Reviewed-on:
	http://openocd.zylin.com/558 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-03-27  Wjatscheslaw Stoljarski (Slawa) <wjatscheslaw.stoljarski@kiwigrid.com>

	* : cfg: add imx53loco board config Add board config for iMX53QSB (loco) Change-Id: I8659dcd71a56d5fe855eaf62be0a415198b558c5 Signed-off-by:
	Wjatscheslaw Stoljarski (Slawa)
	<wjatscheslaw.stoljarski@kiwigrid.com> Reviewed-on:
	http://openocd.zylin.com/542 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-04-04  Simon Widmer <simonxwidmer@gmail.com>

	* : Support for KaRo TX25 CPU Module on a StarterkitV base board This patch adds support for the KaRo TX25 module on a StarterkitV
	base board.  For board details, check
	http://www.karo-electronics.com/tx25.html Change-Id: I2c80c5467bc476955b55196728aa3c37c8185e6c Author: Simon
	Widmer <simonxwidmer@gmail.com> Signed-off-by: Mark Vels
	<mark.vels@team-embedded.nl> Reviewed-on:
	http://openocd.zylin.com/557 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-04-04  Spencer Oliver <spen@spen-soft.co.uk>

	* : doxygen: remove warnings Change-Id: I020845a8df7b67f3b6c1a233b3ee07a5d14fa685 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/556 Tested-by: jenkins

2012-04-02  Salvador <sarroyofdez@yahoo.es>

	* : Minor bug fixes in Mips32 code Now the the "Fast" version for memory blank check in pic32mx.c can
	be called: default_flash_blank_check()  instead of the "fallback"
	default_flash_mem_blank_check().  The command "verify_image", without working area, now don't show:  checksum mismatch - attempting binary compare when there are no
	real errors in flash.  Change-Id: I256e8ae949289634e1de5c1c2861e4c4c4b7fdce Signed-off-by:
	Salvador <sarroyofdez@yahoo.es> Reviewed-on:
	http://openocd.zylin.com/549 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-03-30  Spencer Oliver <spen@spen-soft.co.uk>

	* : docs: remove unused primer ref we already have a link to the patch primer in the main index.  Change-Id: Ib90ade76a17f5d99da8fe481d8f87c68eca38f1c Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/546 Tested-by: jenkins

2012-04-02  Uwe Hermann <uwe@hermann-uwe.de>

	* : Initial config for the Voltcraft DSO-3062C.  This is a digital oscilloscope which uses a Samsung S3C2440
	internally.  http://randomprojects.org/wiki/Voltcraft_DSO-3062C Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Change-Id:
	I5e28c3a8f30665a162e34c831294e4e658a16ebb Reviewed-on:
	http://openocd.zylin.com/548 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2012-03-20  Spencer Oliver <spen@spen-soft.co.uk>

	* : jimtcl: update to version 0.73 Change-Id: I9c943abb3ec5148b9cb24d0823f7787066948201 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/536 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2012-03-15  Mathias K <kesmtp@freenet.de>

	* : stm32: Update register read/write to the register definition.  This patch fix the register index on read/write register.  Change-Id: I7b52a927a48259d6f497ac0f474aff7ff1529e9a Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/525 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-03-30  Spencer Oliver <spen@spen-soft.co.uk>

	* : build: correctly quote m4 parameters Change-Id: I8fbef892caa78dba5324a8bc28d2a4a4854b1f48 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/544 Tested-by: jenkins

2012-03-26  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: add STM32F4x and STM3241G-EVAL config files This adds support for the STM32F4 target and the STM3241G Eval
	Board, in both standalone and using the onboard STLINK.  Change-Id: I62f8908b5880568b2b36c78a78f94c40861ff335 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/540 Tested-by: jenkins

2012-03-06  Olivier Schonken <olivier.schonken@gmail.com>

	* : Added tcl config scripts for SAM3A/X targets and devboard The SAM3A/X processors that were released thus far is either a
	SAM3A/X(4) - 256K, or a SAM3A/X(8) - 512K device.  Thus the config
	files are per variant, and not per device.  Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Change-Id: I84d26d044e810eb428b1d6287907ea3bf8364c73 Signed-off-by:
	Olivier Schonken <olivier.schonken@gmail.com> Reviewed-on:
	http://openocd.zylin.com/522 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-03-20  Spencer Oliver <spen@spen-soft.co.uk>

	* : tools: update release scripts to use configure.ac we have already updated autoconf to use configure.ac instead of
	configure.in, so update release.sh to use the new name.  Change-Id: I2dc2beaf2f85058c4627183bc093052677ccba1b Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/537 Tested-by: jenkins

2012-03-08  Chris Morgan <chmorgan@gmail.com>

	* : Create a init_board procedure for the ea dev board.  Signed-off-by: Chris Morgan <chmorgan@gmail.com> Change-Id:
	I082b0d3092c7f3b2ee6b68af64d48c78b31f1dbf Reviewed-on:
	http://openocd.zylin.com/510 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-03-17  Salvador <sarroyofdez@yahoo.es>

	* : Bug in src/target/mips32_pracc.c The bug shows up with the command "mdw addres count" and only if
	count>1024 (count>0x400).  The first 1024 values shows as expected,
	but the rest of the values  are wrong.  Name of variable  bytesread"
	is changed to "wordsread" to reflect what really does.  Change-Id: Iad79393e72da2637551c5ae6e829e3873605c520 Signed-off-by:
	Salvador <sarroyofdez@yahoo.es> Reviewed-on:
	http://openocd.zylin.com/527 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-03-15  Mathias K <kesmtp@freenet.de>

	* : gdb_server: Simple close the connection and not exit openocd.  This patch let openocd running and only close the gdb connection on
	error.  Change-Id: Ifb88e16834b51207cc4c82210eab904ed8d30b71 Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/523 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-03-14  Paul Fertser <fercerpav@gmail.com>

	* : rtos: add sanity checking for FreeRTOS's quantity of priorities On operating systems with opportunistic malloc() (e.g. default
	setting in GNU/Linux) malloc can sometimes allocate a huge memory
	region but later the process will get killed on the first attempt to
	use this memory, so checking for malloc's return value is not enough
	to prevent a crash.  This patch is compile-tested only.  Change-Id: I5e21663115c8e9a0ca9f3d71f7ba4bd09e5c3bb1 Signed-off-by:
	Paul Fertser <fercerpav@gmail.com> Reviewed-on:
	http://openocd.zylin.com/521 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-02-24  Alexandre Pereira da Silva <aletes.xgr@gmail.com>

	* : stlink: fix alignment build warning The {read,write}_mem32 interface functions was asking a 32 bits
	buffer but they don't need 32 bits alignment.  This will change the
	interface to a 8 bits buffer to remove the alignment mismatch
	warning. This was causing build errors on platforms with strict
	aliasing rules.  Change-Id: I338be8df5686f07a64ddb4f17c1bb494af583999 Signed-off-by:
	Alexandre Pereira da Silva <aletes.xgr@gmail.com> Reviewed-on:
	http://openocd.zylin.com/483 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-03-13  Mathias K <kesmtp@freenet.de>

	* : armv7m: Add a dummy register at the end of the register list.  Signed-off-by: Mathias K <kesmtp@freenet.de> Change-Id:
	I0bfad091bd8adabd949fc0a74ef3a08a514eb307 Reviewed-on:
	http://openocd.zylin.com/519 Reviewed-by: Peter Stuge
	<peter@stuge.se> Tested-by: jenkins

2012-03-12  Mathias K <kesmtp@freenet.de>

	* : stm32: determine all cpu types and use common examine This patch determine all cpu types and not only the cortex M3 and
	the stm32 target use the common target examine function from the
	cortex_m sources.  Change-Id: If689dd994b3855284b927fc4b206f420cf32b6c7 Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/511 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-03-08  Mathias K <kesmtp@freenet.de>

	* : Automatically prepend v1 mass storage protocol.  This patch prepend the v1 mass storage protocol to the command
	buffer and simplify the usb read/write handling.  Change-Id: I709602600e93cd1eb5848fa9f4d15659ba85eb35 Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/506 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-03-12  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: correct pic32mx config typo's Change-Id: Ibe5b6b0efefc7cfc75d789eb7e9c7ee239526ae2 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/508 Tested-by: jenkins

2012-02-28  Jan Dakinevich <jan.dakinevich@gmail.com>

	* : jtag: basic support for P&E Micro OSBDM (aka OSJTAG) adapter This driver provides support for the P&E Micro OSBDM adapter
	(sometimes named as OSJTAG), mounted on the Freescale TWRK60N512
	bord. Thus, it provides a quick start when working with this board.
	The driver doesn't use BDM commands, but work with OSBDM adapter
	using only JTAG commands.  Change-Id: Ibc3779538e666e07651d3136431e5d44344f3b07 Signed-off-by:
	Jan Dakinevich <jan.dakinevich@gmail.com> Reviewed-on:
	http://openocd.zylin.com/492 Tested-by: jenkins Reviewed-by: Tomas
	Frydrych <tf+openocd@r-finger.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2012-03-08  Spencer Oliver <spen@spen-soft.co.uk>

	* : docs: add stm32 dual bank example Change-Id: I1dfe134e2c7694fc978d14b4b21bdf9c82ca4b16 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/507 Tested-by: jenkins

2012-03-05  yvind Harboe <oyvind.harboe@zylin.com>

	* : flash: retire unused eCos flash driver even the AT91EB40a's flash is covered by CFI and nobody ever
	submitted any other drivers based on eCos code. It's just possible
	that this idea was missing documentation and "marketing", but it's
	in git if somebody wants to resurrect it.  Change-Id: I66449aa6e0997301f9d67f28098789bfc891d6e9 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/502 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2012-02-25  Szymon Modzelewski <szmodzelewski@gmail.com>

	* : flash: stm32f1x: add a couple missing stm32x_get_flash_reg Change-Id: I163de2c1bd962e7ea9ca6c741c1c62224c210677 Signed-off-by:
	Szymon Modzelewski <szmodzelewski@gmail.com> Reviewed-on:
	http://openocd.zylin.com/486 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-02-29  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: fix incorrect pc console output target_call_event_callbacks needs to be called after debug entry
	otherwise we will get a console pc mismatch.  Change-Id: I278137736d5e85ca9662c306f6ac81336d8eb6cf Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/499 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2012-02-28  Attila Kinali <attila@kinali.ch>

	* : SAM3: Remove unused reference to SUPC registers The SUPC (Supply Controller) registers are on different base
	addresses on different SAM3 chips: SAM3U: 0x400e1210 SAM3N:
	0x400e1410 SAM3S: 0x400e1410 This creates a problem with the sam3_reg_list array which is const,
	but would need to be changed at runtime to account for this
	variability. As this register is not used anywhere, it's simplest to
	just remove it.  Change-Id: I987eb371648d826aa6d5e9de18d38c7bb66d6fca Signed-off-by:
	Attila Kinali <attila@kinali.ch> Reviewed-on:
	http://openocd.zylin.com/495 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-02-28  Attila Kinali <attila@kinali.ch>

	* : SAM3S: correct flash sector sizes.  Lock region count and sector sizes did not match datasheet.  (see
	6500C-ATARM-8FE11 "SAM3S Series Datasheet", Table 7-1) Change-Id: Ic511802f96ed03856467a24a6736349205a0576a Signed-off-by:
	Attila Kinali <attila@kinali.ch> Reviewed-on:
	http://openocd.zylin.com/493 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-02-21  Szymon Modzelewski <szmodzelewski@gmail.com>

	* : stlink-v1: fix memory writes implement stlink_usb_send and use it to fix stlink_usb_write_mem using two calls to stlink_usb_recv is inappropriate since each call
	issues a SG command on stlink-v1, resulting in errors Change-Id: I24ef9f2dda284e041dc4a532b59968a77eebe702 Signed-off-by:
	Szymon Modzelewski <szmodzelewski@gmail.com> Reviewed-on:
	http://openocd.zylin.com/498 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-02-21  Szymon Modzelewski <szmodzelewski@gmail.com>

	* : stlink-v1: code cleanup This patch moves the bulk of the stlink read/write code into the
	stlink_usb_xfer set of functions and implements stlink_usb_recv in
	terms of the generic stlink_usb_xfer stlink_usb_xfer will be needed to implement stlink_usb_send without
	code duplication stlink_usb_xfer: -sends the stlink command -performs a read or write
	(as requested) -checks the status (v1 only) Change-Id: I0137d52620bd4883d46c9977a9e73f67622000a1 Signed-off-by:
	Szymon Modzelewski <szmodzelewski@gmail.com> Reviewed-on:
	http://openocd.zylin.com/477 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-02-17  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: add stm32lx High Density Devices Change-Id: Ieed9de4b078e1ebf659054a758b4f69acdf5b83e Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/466 Tested-by: jenkins

2012-02-21  Szymon Modzelewski <szmodzelewski@gmail.com>

	* : stlink-v1: fix memory writes implement stlink_usb_send and use it to fix stlink_usb_write_mem using two calls to stlink_usb_recv is inappropriate since each call
	issues a SG command on stlink-v1, resulting in errors Change-Id: I52ff9ee8f5d9ae0d47356477468eb98952205c99 Signed-off-by:
	Szymon Modzelewski <szmodzelewski@gmail.com> Reviewed-on:
	http://openocd.zylin.com/478 Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2012-02-24  Neil Jensen <neil30al@gmail.com>

	* : cfg: Beaglebone/AM335x refactor Split out functions specific to the AM335x SOC into the target
	directory and simplified the board config file.  This should allow
	one to quickly create new configs for boards based on the TI
	processor family.  Change-Id: I0c3db97950dfa832f1f1918fc10c180f068bba74 Signed-off-by:
	Neil Jensen <neil30al@gmail.com> Reviewed-on:
	http://openocd.zylin.com/489 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-02-21  Spencer Oliver <spen@spen-soft.co.uk>

	* : jtag: use correct tap -ignore-version mask when -ignore-version is used we should mask of the upper 4bits not
	8bits.  Change-Id: I9ffe24c2aeeb414677357a647609fdf018890194 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/473 Tested-by: jenkins

2012-02-16  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: add stm32f2x async flash loader This enable the stm32f2x flash driver to use the asynchronous
	algorithm support.  Speed increase is as follows: before - wrote 1048576 bytes from file
	stm32f4x.bin in 30.453804s (33.625 KiB/s) after - wrote 1048576
	bytes from file stm32f4x.bin in 23.679497s (43.244 KiB/s) This also fixes a bug that was in the old flash loader.  The old
	loader waited while bit16 of the status reg was 0, the new loader
	waits until this bit is 0 as stated in the flash spec.  Bizarrely
	this bug did not effect programming on any tested parts.  Change-Id: I3efc94d42cbe81283673a8f4203700638080af6e Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/460 Tested-by: jenkins

2012-02-10  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: add target async algorithm support Currently the stm32f1x flash driver uses an asynchronous algorithm
	as part of the block flash programming. This greatly speeds up flash
	programming as the target is always running.  Moving the async code to the target enable other targets to use this
	added functionality.  Change-Id: I8e53f094c2ef7848a7f86ddb9a35b6edbfc8454a Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/402 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2012-02-18  Neil Jensen <neil30al@gmail.com>

	* : cfg: Beaglebone Support Added support for the Beaglebone board based on the am335x processor
	family.  After much trial and error, I was able to configure the
	Icepick-D and connect to the processor, halt execution, and run a
	sample program.  This is a unified config file (it doesn't use any
	include statements) and further work needs to be done to split out
	the icepick-d configuration to be more generic.  Change-Id: Ia1b8e9f01f56bd4f8c575ba3d0160c248583a15e Signed-off-by:
	Neil Jensen <neil30al@gmail.com> Reviewed-on:
	http://openocd.zylin.com/471 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-02-13  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : target: rewrite working area allocator The existing allocator couldn't reuse a freed allocation if the
	sizes didn't match exactly. That led to problems when for example a
	flash write routine had allocated all of the working area to speed
	up operation. A subsequent verify pass couldn't allocate space for
	the checksum algorithm even though all previous allocations had been
	freed.  This allocator is marginally more complex, but solves the above
	problem by splitting larger free areas to fulfill smaller requests
	and by merging released areas into adjacent free areas.  An initial free area, covering the entire specified address range,
	is set up on first allocation, and all allocations are split off
	from (and ultimately merged into) that one. It can also easily be
	adapted to support several disjoint working areas for the same
	target, by setting up several initial free areas and slightly
	modifying the merge code.  Change-Id: I6faaf9801312bb19a4fa4474694a0cd1c6e0ab54 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/445 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-02-21  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: support expected-id 0 This brings the stlink driver inline with the rest of OpenOCD.  If the user configures the tap as -expected-id 0 then the IDCODE
	will be treated as a wildcard and ignored.  Change-Id: I99160c69b2b40f5b1f608bb59ab6630894502fd8 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/476 Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de>

2012-02-18  Stian Skjelsad <stian@nixia.no>

	* : Sometime in the past, nand_fileio_finish started to return
	ERROR_OK (with the value of zero) on success.  Change-Id: Ifb743c1617e2a6071a87c901fae8165969efcdbf Signed-off-by:
	Stian Skjelstad <stian@nixia.no> Reviewed-on:
	http://openocd.zylin.com/468 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-02-17  Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>

	* : Fix Typo in cfg file Change-Id: Id91ef70988212185f9ec653cbf5dc4e1defb1b9e Signed-off-by:
	Jonathan Dumaresq <jdumaresq@cimeq.qc.ca> Reviewed-on:
	http://openocd.zylin.com/464 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-02-14  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: add arm semi-hosting support Change-Id: Ib275d451a9201580f08ced090e50cf45eb3ab3e2 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/459 Tested-by: jenkins

2012-02-14  Spencer Oliver <spen@spen-soft.co.uk>

	* : docs: fix texinfo warnings A period or comma must follow the closing brace of an @xref.  Change-Id: I272f1e7fac8f1fee4844f485b0b8e2e4e9cf352d Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/456 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2012-02-07  Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>

	* : Add stm32f0x target Change-Id: I4abfef4459b7e2780d17bdd7623fd1ef797cc8ea Signed-off-by:
	Jonathan Dumaresq <jdumaresq@cimeq.qc.ca> Reviewed-on:
	http://openocd.zylin.com/437 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-02-16  Mathias K <kesmtp@freenet.de>

	* : Add bootloader mode.  This patch add the bootloader define.  Change-Id: I280a8a35c3514910dd381de3ab8ad59c9bd74ca1 Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/455 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-02-13  Spencer Oliver <spen@spen-soft.co.uk>

	* : docs: correct small typo Change-Id: I5e8bea591274b4032d3e04c4be7e9110138d5bc2 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/447 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2012-02-04  James Robinson <jmr13031@gmail.com>

	* : topic: Add support for i.MX28EVK Added the file imx28.cfg to the target directory Added the file
	imx28evk.cfg to the board directory Change-Id: I02a74a03f3773892f830d13660ffdded34f3261d Signed-off-by:
	James Robinson <jmr13031@gmail.com> Reviewed-on:
	http://openocd.zylin.com/428 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2012-02-10  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: add revb ek-lm3s811 board config Add board config for older (revb) ek-lm3s811 Change-Id: I75aca1714de3e88b60d00fa0f99f2c4b076b569c Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/444 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2012-02-10  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: add stm32ldiscovery board config Change-Id: I392fdc4c588783fda1c7d4d6413b86ae9aa3f6b9 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/442 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2012-02-03  Freddie Chopin <freddie.chopin@gmail.com>

	* : Add init_board procedure executed after init_targets This adds init_board procedure that behaves exactly the same as
	init_targets - it can be overriden by "next level" scripts. This
	procedure is executed after init_targets, allowing common stuff
	(jtag chain, memory, flash, ...) to be configured in target script
	(via init_target) and leaving rest (like additional memory, reset
	configuration, reset-init handlers, ...) to be done in init_board.  This makes init_targets scheme more complete and easier to use -
	current board scripts will not need new init_targets, because
	everything can be "packed" in init_boards. Moreover it solves the
	problem of variables being set in init_targets (executed after
	init), which were not accessible by "linear" scripts (parsed before
	init). All that has to be done is to enclose all code in board
	config file in init_board procedure.  Change-Id: I0736b1ff9873a687966407d62b58ccf29a8e597b Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on:
	http://openocd.zylin.com/427 Reviewed-by: Chris Morgan
	<chmorgan@gmail.com> Tested-by: jenkins Reviewed-by: Peter Stuge
	<peter@stuge.se>

2012-02-06  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: add stm32vldiscovery board config Change-Id: I6343d1e61153ba71c71f8a473171972abb8e400d Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/432 Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2012-02-01  Freddie Chopin <freddie.chopin@gmail.com>

	* : Export _TARGETNAME from generic LPC2xxx script Make _TARGETNAME variable global so it could be used by scripts
	sourcing it.  Change-Id: Iaf1c3b53875734658b1b8f136c9bb958988b56bf Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on:
	http://openocd.zylin.com/421 Tested-by: jenkins Reviewed-by: Chris
	Morgan <chmorgan@gmail.com> Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com>

2012-02-05  Spencer Oliver <spen@spen-soft.co.uk>

	* : build: cleanup src/target directory Change-Id: Ia055b6d2b5f6449a38afd0539a8c66e7d7e0c059 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/430 Tested-by: jenkins

2012-02-02  Spencer Oliver <spen@spen-soft.co.uk>

	* : checkpatch: remove __packed and __aligned checks These checks are specific to linux kernel.  Change-Id: Ia9b837b5609922a897822f1d55f96f04c0f1f838 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/424 Tested-by: jenkins

2012-02-02  Spencer Oliver <spen@spen-soft.co.uk>

	* : checkpatch: increase line length to 120 Change-Id: I963385d0a4880f2b1e55208c8dfe65c1870ac6e1 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/422 Tested-by: jenkins

2012-01-31  Spencer Oliver <spen@spen-soft.co.uk>

	* : build: cleanup src/flash/nand directory Change-Id: I21bb466a35168cf04743f5baafac9fef50d01707 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/419 Tested-by: jenkins

2012-01-30  Spencer Oliver <spen@spen-soft.co.uk>

	* : build: cleanup src/rtos directory Change-Id: I24bc62d12409dbfc20a0a986acf6b3f2c913e36d Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/416 Tested-by: jenkins

2012-01-30  Spencer Oliver <spen@spen-soft.co.uk>

	* : checkpatch: remove volatile check We may enable this again - but at the moment is causing extra issues
	with reformatting the codebase.  Change-Id: I5a2aaaa32ad784e011dff3079ff45501452c1819 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/414

2012-01-30  Spencer Oliver <spen@spen-soft.co.uk>

	* : build: cleanup src/server directory Change-Id: I6410df28c5999f5cbee2d3bcaa02469a29ea4c15 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/412 Tested-by: jenkins

2012-01-27  Spencer Oliver <spen@spen-soft.co.uk>

	* : build: cleanup src/xsvf directory Change-Id: I5325980b240fba841d8cce81985f4da369ad9052 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/410 Tested-by: jenkins

2012-01-27  Spencer Oliver <spen@spen-soft.co.uk>

	* : build: cleanup src/pld directory Change-Id: I9edb027c76e5d7fe21d557a11e6a9691fa581e86 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/408 Tested-by: jenkins

2012-02-05  Spencer Oliver <spen@spen-soft.co.uk>

	* : build: update uncrustify config This config has been updated for 0.59 Change-Id: If0dc87dd5de052c1228743a196a3198dbd4bc279 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/406 Tested-by: jenkins

2012-01-25  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : stm32f1x: fix bug in flash loader and restrict instruction set
	to armv6-m Correct the offset to the read pointer when clearing it on error.  Also restrict the instruction set to armv6-m so the flash driver can
	be used on Cortex-M0 parts with the same flash controller.  Change-Id: I380f9dabcc41fb6e4d43a7e02f355e2381913f39 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/399 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com> Reviewed-by: Jonathan Dumaresq
	<jdumaresq@cimeq.qc.ca> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2012-01-23  Mathias K <kesmtp@freenet.de>

	* : STLINK: add stlink v1 configuration Change-Id: I6b9de16879ff928d60e3c4a64731449275291cc2 Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/397 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-01-25  Mathias K <kesmtp@freenet.de>

	* : STLINK: swd transport renamed and jtag+swim transport added This patch add jtag support to the stlink driver add two new
	transport types, JTAG and SWIM.  Change-Id: I7089d74250330be5c6a01c24066307641df7d11e Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/393 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-01-25  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: fix stellaris class regression for some reason the following commit was incorrect
	769064de4bd8fc59804c37a418b83fcdba6fd36f Only the Sandstorm and Fury class should write this register.  Change-Id: Ie18f1da6e9b59fb99cca47aa93c7f2fee447ccea Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/400 Tested-by: jenkins

2011-12-02  Fujitsu FM3 Application Team <openocd.fseu@de.fujitsu.com>

	* : flash: cleanup/reformat fm3 flash driver Signed-off-by: Fujitsu FM3 Application Team
	<openocd.fseu@de.fujitsu.com> Change-Id:
	Iaf0bacfa5438a0213a65a3d60e7d461965a5a1ac Reviewed-on:
	http://openocd.zylin.com/249 Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com> Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-01-17  Timo Ketola <timo@exertus.fi>

	* : i.MX25: Set OOB size (MXC NFC) SPAS register (OOB size) is left wrong after reset with respect to
	2KiB page NAND chip. That will lead to ECC errors after 'reset
	halt'.  Change-Id: If5a4685cb8d6be35879453951611ef1059da219c Signed-off-by:
	Timo Ketola <timo@exertus.fi> Reviewed-on:
	http://openocd.zylin.com/384 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-01-20  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: add missing Stellaris Blizzard info Change-Id: I1d6fb9a2ec8d87267a266f68c01ce032450e45d5 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/392 Tested-by: jenkins

2012-01-17  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: cleanup stellaris device class detection read the target class during probe and save for later use.  Change-Id: Ib3ad20edc7d206b7f434bdcc6b947e6a5f06dd1f Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/388 Tested-by: jenkins

2012-01-13  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: enable cortex special reg writes Change-Id: I5aa02e8de6dd5ac5a6ca628ba4068decb200c689 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/378 Tested-by: jenkins

2012-01-19  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: print bank usage on failure This makes use of the newly introduced usage field in the flash bank
	structure.  Also remove the assertion if usage field is null and lets print a
	DEBUG_LOG message instead.  Change-Id: I384bf0e2c444fcc99deef73aec9ef01149a91c76 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/391 Tested-by: jenkins

2012-01-17  Timo Ketola <timo@exertus.fi>

	* : doc: Update patch procedure Change-Id: I3e50357b4ddaf483712bbac68b6427b31529f666 Signed-off-by:
	Timo Ketola <timo@exertus.fi> Reviewed-on:
	http://openocd.zylin.com/387 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2012-01-16  Spencer Oliver <spen@spen-soft.co.uk>

	* : cmd: add missing usage vars we should have caught them all - hopefully.  Change-Id: I35435317fccaf5ad0216244d69f76db6857bb582 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/381 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2012-01-06  Michel JAOUEN <michel.jaouen@stericsson.com>

	* : u8500: linux rtos config Change-Id: I21a9dcc5fb260095aed2217e467b74ebecb39afb Signed-off-by:
	Michel JAOUEN <michel.jaouen@stericsson.com> Reviewed-on:
	http://openocd.zylin.com/349 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2012-01-03  Michel JAOUEN <michel.jaouen@stericsson.com>

	* : rtos : create qsymbol interface and add str_to_hex interface Change-Id: I1b26f7efd3ad4a060f772dd12408e77a03d93cea Signed-off-by:
	Michel JAOUEN <michel.jaouen@stericsson.com> Reviewed-on:
	http://openocd.zylin.com/347 Tested-by: jenkins Reviewed-by: Evan
	Hunter <evan@ozhiker.com> Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com>

2012-01-03  Michel JAOUEN <michel.jaouen@stericsson.com>

	* : rtos : ps command Change-Id: I1b00b6d72f425826c33b0df7dd63114ce642ce93 Signed-off-by:
	Michel JAOUEN <michel.jaouen@stericsson.com> Reviewed-on:
	http://openocd.zylin.com/345 Tested-by: jenkins Reviewed-by: Evan
	Hunter <evan@ozhiker.com> Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com>

2012-01-03  Michel JAOUEN <michel.jaouen@stericsson.com>

	* : rtos : current_threadid move to rtos context Change-Id: I49d9d6d64c418be601d8723cb3eea9c3716ecb6b Signed-off-by:
	Michel JAOUEN <michel.jaouen@stericsson.com> Reviewed-on:
	http://openocd.zylin.com/343 Tested-by: jenkins Reviewed-by: Evan
	Hunter <evan@ozhiker.com> Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com>

2012-01-03  Michel JAOUEN <michel.jaouen@stericsson.com>

	* : rtos : remove unused parameter Change-Id: I98c9f28a0085bd4713b694181ab544777091eac6 Signed-off-by:
	Michel JAOUEN <michel.jaouen@stericsson.com> Reviewed-on:
	http://openocd.zylin.com/341 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2012-01-12  Mathias K <kesmtp@freenet.de>

	* : stlink: handle wrong initialization file if no layout was
	specified This patch remove the hardcoded default layout and return an error
	if no layout was specified in the configuration file.  Change-Id: I0e7833faa2dc194e727122840bcbdacd321cc4fd Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/369 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-01-12  Mathias K <kesmtp@freenet.de>

	* : stlink: add read/write 8bit memory This patch add layout api funtions and implementation to read/write
	8bit memory.  Change-Id: I8d145eb07e5afa9ce1830578e57d80a80d21e7dc Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/366 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2012-01-12  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: correctly signal stlink_interface_open failure give the user a error msg on open failure.  Change-Id: If4a57bac7f3e1746c2a05c7a96747a38da188041 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/368 Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de>

2012-01-09  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: detect stm32f4x device id errata This allows us to detect a device arrata where the device id
	returned is incorrect.  This issue only effects stm32f4x Rev A silicon.  Change-Id: Ic9f4985f9abf562f97322dcf484199f0a4eb01bb Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/354 Tested-by: jenkins

2012-01-09  Spencer Oliver <spen@spen-soft.co.uk>

	* : stlink: add dummy speed handlers Change-Id: I0445be7867637728145941b06225dc0acc5380e8 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/355 Tested-by: jenkins

2012-01-10  Mathias K <kesmtp@freenet.de>

	* : optimize: replace while loop by memcpy There is no need to use a while loop here. This patch simple copy
	the last bytes with the system function.  Change-Id: Ibda72dca449746efeba5a1af2e45c5990f9cf347 Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/364 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2012-01-10  Bruno FLEURETTE <bruno.fleurette@gmail.com>

	* : flash: pre-check flash unlock for stm32f2x add checking of the current flash lock status before performing the
	unlock sequence (which would fail in an unlocked state) Change-Id: I693294c9cd2f59e69cb5bf3338120052fd680b1e Signed-off-by:
	Bruno FLEURETTE <bruno.fleurette@gmail.com> Signed-off-by: Øyvind
	Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/363 Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk> Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de>

2012-01-09  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: fix missing semihosting return path bug nicely caught by clang.  Change-Id: I7abf0fdd76666fb3eb1c83e3edfd01e0da485ffe Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/359 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2012-01-04  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: use stm32f2x flash size register Use the flash size register to calculate flash info.  Change-Id: Ia230db8a08d440710c030a9e5001f20561c9f420 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/337 Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de>

2012-01-04  Spencer Oliver <spen@spen-soft.co.uk>

	* : contrib: add stlink udev rules Change-Id: I3f11de8abfaf8821311a7aa0fd237006de3c2792 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/333 Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de>

2012-01-03  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: use consistent chipname Change-Id: I41e0788f830d5ece13e6231a99d5b4013c9c678f Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/331 Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de> Reviewed-by: Freddie Chopin
	<freddie.chopin@gmail.com>

2012-01-07  yvind Harboe <oyvind.harboe@zylin.com>

	* : rtos: fix bug in error handling checking for != ERROR_FAIL is broken.  Change-Id: Id7085afac653bb9c38d08928227a9ea402d8e6e9 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/351 Tested-by: jenkins Reviewed-by: Michel
	JAOUEN <michel.jaouen@stericsson.com> Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com>

2011-12-16  Mathias K <kesmtp@freenet.de>

	* : Change return value on error.  On wrong parameters a error is signalized to the calling function.  Change-Id: I484443fdb39938e20382edc9246d5ec546a5c960 Signed-off-by:
	Mathias K <kesmtp@freenet.de> Signed-off-by: Øyvind Harboe
	<oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/282
	Tested-by: jenkins Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com>

2011-12-28  yvind Harboe <oyvind.harboe@zylin.com>

	* : flash: introduce .usage field for nand and nor flash driver
	structure Change-Id: I47e7ec8fa8c70d2addc3aa52d7c97e9e1e7bb662 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/301 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2011-12-24  Mathias K <kesmtp@freenet.de>

	* : command: print BUG warning when usage is missing These error messages will prompt patches to be submitted for missing
	.usage or empty fields. All of the below must be resolved before
	next release.  The Jim defined commands are excluded from this checklist because
	the help text can be set later than during command registration.  strlen(.usage) == 0 means that the command expects no arguments.  Updates to this patch in Gerrit to fix problems below are most
	welcome. Anyone can push updated versions of a patch to Gerrit. If
	there are no further updates to this patch within a week, it will be
	pushed to the master branch to prompt more fixes.  These were caught by launching OpenOCD.  Error: BUG: command 'command' does not have the '.usage' field
	filled out Error: BUG: command 'script' does not have the '.usage'
	field filled out Error: BUG: command 'power_restore' does not have
	the '.usage' field filled out Error: BUG: command 'srst_deasserted'
	does not have the '.usage' field filled out Error: BUG: command
	'measure_clk' does not have the '.usage' field filled out Error:
	BUG: command 'exit' does not have the '.usage' field filled out
	Error: BUG: command 'shutdown' does not have the '.usage' field
	filled out Error: BUG: command 'gdb_sync' does not have the '.usage'
	field filled out Error: BUG: command 'interface_list' does not have
	the '.usage' field filled out Error: BUG: command 'target' does not
	have the '.usage' field filled out Error: BUG: command 'target init'
	does not have the '.usage' field filled out Error: BUG: command
	'flash' does not have the '.usage' field filled out Error: BUG:
	command 'flash init' does not have the '.usage' field filled out
	Error: BUG: command 'flash banks' does not have the '.usage' field
	filled out Error: BUG: command 'nand' does not have the '.usage'
	field filled out Error: BUG: command 'nand drivers' does not have
	the '.usage' field filled out Error: BUG: command 'nand init' does
	not have the '.usage' field filled out Error: BUG: command 'pld'
	does not have the '.usage' field filled out Error: BUG: command 'pld
	init' does not have the '.usage' field filled out Error: BUG:
	command 'mflash' does not have the '.usage' field filled out Error:
	BUG: command 'mflash init' does not have the '.usage' field filled
	out Error: BUG: command 'dummy' does not have the '.usage' field
	filled out Error: BUG: command 'dummy foo' does not have the
	'.usage' field filled out Error: BUG: command 'scan_chain' does not
	have the '.usage' field filled out Error: BUG: command 'jtag' does
	not have the '.usage' field filled out Error: BUG: command 'jtag
	init' does not have the '.usage' field filled out Error: BUG:
	command 'arm' does not have the '.usage' field filled out Error:
	BUG: command 'arm reg' does not have the '.usage' field filled out
	Error: BUG: command 'etm' does not have the '.usage' field filled
	out Error: BUG: command 'arm7_9' does not have the '.usage' field
	filled out Error: BUG: command 'at91eb40a.cpu' does not have the
	'.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm'
	does not have the '.usage' field filled out Error: BUG: command 'arm
	reg' does not have the '.usage' field filled out Error: BUG: command
	'at91eb40a.cpu etm' does not have the '.usage' field filled out
	Error: BUG: command 'at91eb40a.cpu arm7_9' does not have the
	'.usage' field filled out Error: BUG: command 'target_request' does
	not have the '.usage' field filled out ^C oyvind@fierce:~/openocd$
	openocd -c "interface dummy" -f board/at91eb40a.cfg 2>&1 | grep -w
	BUG Error: BUG: command 'command' does not have the '.usage' field
	filled out Error: BUG: command 'script' does not have the '.usage'
	field filled out Error: BUG: command 'power_restore' does not have
	the '.usage' field filled out Error: BUG: command 'srst_deasserted'
	does not have the '.usage' field filled out Error: BUG: command
	'measure_clk' does not have the '.usage' field filled out Error:
	BUG: command 'exit' does not have the '.usage' field filled out
	Error: BUG: command 'shutdown' does not have the '.usage' field
	filled out Error: BUG: command 'gdb_sync' does not have the '.usage'
	field filled out Error: BUG: command 'interface_list' does not have
	the '.usage' field filled out Error: BUG: command 'target' does not
	have the '.usage' field filled out Error: BUG: command 'target init'
	does not have the '.usage' field filled out Error: BUG: command
	'flash' does not have the '.usage' field filled out Error: BUG:
	command 'flash init' does not have the '.usage' field filled out
	Error: BUG: command 'flash banks' does not have the '.usage' field
	filled out Error: BUG: command 'nand' does not have the '.usage'
	field filled out Error: BUG: command 'nand drivers' does not have
	the '.usage' field filled out Error: BUG: command 'nand init' does
	not have the '.usage' field filled out Error: BUG: command 'pld'
	does not have the '.usage' field filled out Error: BUG: command 'pld
	init' does not have the '.usage' field filled out Error: BUG:
	command 'mflash' does not have the '.usage' field filled out Error:
	BUG: command 'mflash init' does not have the '.usage' field filled
	out Error: BUG: command 'dummy' does not have the '.usage' field
	filled out Error: BUG: command 'dummy foo' does not have the
	'.usage' field filled out Error: BUG: command 'scan_chain' does not
	have the '.usage' field filled out Error: BUG: command 'jtag' does
	not have the '.usage' field filled out Error: BUG: command 'jtag
	init' does not have the '.usage' field filled out Error: BUG:
	command 'arm' does not have the '.usage' field filled out Error:
	BUG: command 'arm reg' does not have the '.usage' field filled out
	Error: BUG: command 'etm' does not have the '.usage' field filled
	out Error: BUG: command 'arm7_9' does not have the '.usage' field
	filled out Error: BUG: command 'at91eb40a.cpu' does not have the
	'.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm'
	does not have the '.usage' field filled out Error: BUG: command 'arm
	reg' does not have the '.usage' field filled out Error: BUG: command
	'at91eb40a.cpu etm' does not have the '.usage' field filled out
	Error: BUG: command 'at91eb40a.cpu arm7_9' does not have the
	'.usage' field filled out Error: BUG: command 'target_request' does
	not have the '.usage' field filled out Change-Id: I2c3e529530a15d2295a1950ffc59e8f2fc661012 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Signed-off-by: Mathias K
	<kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/299
	Tested-by: jenkins Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2011-12-17  Mathias K <kesmtp@freenet.de>

	* : Add STM32F2X/STLINK target config file.  Change-Id: I02161fa05da993b5b966c31a706667d1bd91935d Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/287 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-12-17  Mathias K <kesmtp@freenet.de>

	* : STM32 ST-LINK target initial release STM32 ST-LINK target  added.  Change-Id: Ibe2b7a3c0d5a8cf73d8680d6019adbdb62d68fa2 Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/279 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-12-15  Mathias K <kesmtp@freenet.de>

	* : Make jim functions public accessible.  Change this 2 functions to make it accessible for other tcl
	interfaces.  Change-Id: Idee07fcc779941b037a05a40c021e3fb0b1a4a7a Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/277 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-12-01  Mathias K <kesmtp@freenet.de>

	* : add private data pointer to the tap interface This will give us the ability to add special data structures and new
	interfaces without rewriting the complete jtag engine.  Change-Id: I21a6e1daa96c5f4d111bbb734c7c1fbc2eaee227 Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/244 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-12-23  Spencer Oliver <spen@spen-soft.co.uk>

	* : build: fix mingw build issues 8901fca0270fec41b12c30c7dbd806d460548c5b broke the build under
	mingw, this fixes that.  Change-Id: I22b91e220dac3b68cc576b65a9f1b8711e64263a Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/298 Tested-by: jenkins Reviewed-by: Freddie
	Chopin <freddie.chopin@gmail.com> Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com>

2011-12-14  Erik Ahln <erik.ahlen@avalonenterprise.com>

	* : Documentation for mxc NAND flash controller Change-Id: I9e552491e8b4737c01e4f8ae2b9a582b6ff2bc5d Signed-off-by:
	Erik Ahlén <erik.ahlen@avalonenterprise.com> Reviewed-on:
	http://openocd.zylin.com/273 Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2011-12-13  Erik Ahln <erik.ahlen@avalonenterprise.com>

	* : Added command to enable/disable/query BI-swap for MXC NAND Change-Id: Ifa3eb739afe0760a974b57c5a17cc3bf7704ba79 Signed-off-by:
	Erik Ahlén <erik.ahlen@avalonenterprise.com> Reviewed-on:
	http://openocd.zylin.com/270 Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2011-12-13  Erik Ahln <erik.ahlen@avalonenterprise.com>

	* : Added board type as a parameter to mx2 NFC as they have
	different base addresses.  Change-Id: I7bc326e9a8d9f6817f046a7faeebede567c53dd2 Signed-off-by:
	Erik Ahlén <erik.ahlen@avalonenterprise.com> Reviewed-on:
	http://openocd.zylin.com/268 Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2011-12-20  Ulf Samuelsson <ulf@emagii.com>

	* : Olimex-ARM-USB-OCD-H: Add udev rule Change-Id: Ifc9a1f7fa9445e05560c335b5bba3a33caeccc51 Signed-off-by:
	Ulf Samuelsson <ulf@emagii.com> Reviewed-on:
	http://openocd.zylin.com/288 Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2011-12-21  Ulf Samuelsson <ulf@emagii.com>

	* : git should ignore patches from format-patch Change-Id: Iafce872fa7559180834532ba80941dec3db7d079 Signed-off-by:
	Ulf Samuelsson <ulf@emagii.com> Reviewed-on:
	http://openocd.zylin.com/295 Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de> Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com>

2011-12-13  yvind Harboe <oyvind.harboe@zylin.com>

	* : jtag: make caller always allocate buffer simplifies the API and there is only one remaining user at this
	point.  Is the implementation busted where the check does not actually
	happen now? Change-Id: I776a43766f5576a08df320f6fe41a2750d101bde Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/264 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-12-13  yvind Harboe <oyvind.harboe@zylin.com>

	* : jtag: retire jtag_alloc_in_value32 API not needed, reduce area of interface and sharp edges to API.  Change-Id: I5347352e7595686634bd0de13fcf6de6e55027b0 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/262 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-12-12  Spencer Oliver <spen@spen-soft.co.uk>

	* : build: libusb use AC_CHECK_HEADER use AC_CHECK_HEADER rather than AC_CHECK_HEADERS so that we do not
	generate a unrequired HAVE_LIBUSB_1_0_LIBUSB_H define.  Change-Id: I23a93d3813716dce797ca1514fdcb84533454c31 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/259 Tested-by: jenkins Reviewed-by: Mathias
	Küster <kesmtp@freenet.de>

2011-12-12  Spencer Oliver <spen@spen-soft.co.uk>

	* : build: correctly quote m4 parameters Change-Id: If7ccb52c107cb4ad7629ffcf237f9003f60e63d0 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/257 Tested-by: jenkins

2011-12-13  Erik Ahln <erik.ahlen@avalonenterprise.com>

	* : Indentation and white space fixes.  Change-Id: Iffbaefea4f3d5e9b56b3c36496b44969d7c07e82 Signed-off-by:
	Erik Ahlén <erik.ahlen@avalonenterprise.com> Reviewed-on:
	http://openocd.zylin.com/266 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-12-16  Spencer Oliver <spen@spen-soft.co.uk>

	* : checkpatch: fix false indent trigger we have changed the indent to 4 to match OpenOCD coding style.  Change-Id: I4870a3410eb20fc2f6df6a3e5891d4d4e598131a Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/285 Tested-by: jenkins

2011-12-15  Erik Ahln <erik.ahlen@avalonenterprise.com>

	* : Change checkpatch.pl tab expanding to 4 characters.  The C coding style guide says that tab width is 4 characters but
	checkpatch.pl expands tabs to 8 characters which produces false
	negatives.  Change-Id: Ibdabbb55269b7cf6bcd38042cccb8bd235e42ce2 Signed-off-by:
	Erik Ahlén <erik.ahlen@avalonenterprise.com> Reviewed-on:
	http://openocd.zylin.com/275 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2011-12-13  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: fix crash in JTAG over TCP/IP disable asynchronous callbacks and reads as minidriver requires
	reads and callbacks to be synchronous.  Could possibly be fixed by some design work.  Change-Id: I7ca79a551085b2e8ba6928e1762d1baed6e95d4b Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/260 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com> Tested-by: Øyvind Harboe
	<oyvindharboe@gmail.com>

2011-12-07  yvind Harboe <oyvind.harboe@zylin.com>

	* : HACKING: add explanation why we want cool-off times as long as a
	week or two Change-Id: I281e9145f43bc7ac173e02c4e209834f0deaae2b Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/254 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk> Reviewed-by: Mathias Küster
	<kesmtp@freenet.de> Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com>

2011-12-02  Antonio Borneo <borneo.antonio@gmail.com>

	* : TCL/SPEAr: default one DDR chip Handle default case of single DDR chip Propagate global variable for
	multi DDR chip Change-Id: I315380f91ee7fcc2976437aa5836d88a7964fc9d Signed-off-by:
	Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on:
	http://openocd.zylin.com/251 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-12-03  rodrigo_l_rosa <rodrigorosa.lg@gmail.com>

	* : HACKING - checkpatch before pushing makes life quicker Change-Id: I4c3cde2aae7bdea138413e373ac986be3efd54de Signed-off-by:
	rodrigo_l_rosa <rodrigorosa.lg@gmail.com> Reviewed-on:
	http://openocd.zylin.com/252 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-12-01  Spencer Oliver <spen@spen-soft.co.uk>

	* : gdb_server: use strndup to allocate debug messages Lets be consistent and use strndup to allocate the debug buffer.  Change-Id: I535ad270ebfeae6e09d28372ab3749c822971223 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/245 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com> Reviewed-by: Andreas Fritiofson
	<andreas.fritiofson@gmail.com>

2011-12-02  Peter Stuge <peter@stuge.se>

	* : Fix remaining incorrect reference to target/at91sam3uXX.cfg Commit 1794e5ee5452c83b5bef6d0a5a8a3f23d647e9c6 renamed the file to
	have all lowercase characters according to most references to the
	file, but the commit didn't change the existing reference to the old
	filename.  Change-Id: I380e52e947a8091d48cf010e3919bf2caed7fdff Signed-off-by:
	Peter Stuge <peter@stuge.se> Reviewed-on:
	http://openocd.zylin.com/248 Tested-by: jenkins

2011-12-01  Spencer Oliver <spen@spen-soft.co.uk>

	* : binarybuffer: use strndup to allocate string Change-Id: I65d8f37b18d5b5a798406b956f50ab7bb550e172 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/246 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2011-11-29  Mathias K <kesmtp@freenet.de>

	* : target init sanity check Add a test if the pointer to the target_init function in the target
	struct is set before the function pointer is used.  Change-Id: Ie4ea542f64f35efce8c5bce2ced9b881bf283ec1 Signed-off-by:
	Mathias K <kesmtp@freenet.de> Reviewed-on:
	http://openocd.zylin.com/241 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-11-22  Evan Hunter <ehunter@broadcom.com>

	* : Fix unused variables error in amt_jtagaccel Change-Id: Ic64cf4e3b5cf8c1ea75a13577728b0cb0d70068e Signed-off-by:
	Evan Hunter <ehunter@broadcom.com> Reviewed-on:
	http://openocd.zylin.com/237 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-11-19  rodrigo_l_rosa <rodrigorosa.lg@gmail.com>

	* : dsp5680xx - flash module clk to freescale cfg value the flash module clock was set according to a spreadsheet from
	freescale, now it's set according to the configuration file used by
	the Freescale Flash Programmer.  both work, but i think it's better
	to use the one used by a software that's made by Freescale (should
	be correct...) Change-Id: I382197a3eb43dd47ff4b9b83d5e05008d5613fc6 Signed-off-by:
	Rodrigo L. Rosa <rodrigorosa.lg@gmail.com> Reviewed-on:
	http://openocd.zylin.com/223 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-10-04  rodrigo_l_rosa <rodrigorosa.lg@gmail.com>

	* : dsp5680xx - fix jtag debug request failure handling if JTAG debug request fails then halting with a reset should be
	attempted.  the failure was ignored previously.  Change-Id: Ibec08e2e97f962d164a110c21aaa80bfc17b7f1a Signed-off-by:
	Rodrigo L. Rosa <rodrigorosa.lg@gmail.com> Reviewed-on:
	http://openocd.zylin.com/221 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-11-15  rodrigo_l_rosa <rodrigorosa.lg@gmail.com>

	* : dsp5680xx - fix - flashing algorithm check now the flash algorithm running on the 568013 checks the
	buffer_empty bit (instead of the command_finished bit) before trying
	to write a new word to the flash mem.  this should speed up the
	flashing procedure. since it is open loop, this change may reduce
	the risk of failure. flashing will fail if JTAG speed is such that
	the flash module cannot keep up.  also, the USTAT register is only read once, as suggested in the flow
	chart provided by freescale (per. ref. manual @ 6-11) the last step of the flow chart, exiting after commands are
	complete, is not implemented.  the algorithm will stay waiting for
	more data. it is up to the PC side to *not* send more data.  Change-Id: I47fe4b50de7da85f80868f5986a89a7e2152616c Signed-off-by:
	Rodrigo L. Rosa <rodrigorosa.lg@gmail.com> Reviewed-on:
	http://openocd.zylin.com/219 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-09-02  rodrigo_l_rosa <rodrigorosa.lg@gmail.com>

	* : dsp5680xx - fix jtag status mask Change-Id: I17a0f22cbeb20e4f6ea4065236243f93d826ccf0 Signed-off-by:
	Rodrigo L. Rosa <rodrigorosa.lg@gmail.com> Reviewed-on:
	http://openocd.zylin.com/217 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-09-02  rodrigo_l_rosa <rodrigorosa.lg@gmail.com>

	* : dsp5680xx - error codes added logging of target error codes to enable automatic error
	handling from tcl.  the plan is to use a computer to execute a
	series of tcl commands, the changes allow simple parsing of return
	messages to detect errors.  Change-Id: Ia98d3bd036e1b6065b475ffff6c1d30baeaf7417 Signed-off-by:
	Rodrigo L. Rosa <rodrigorosa.lg@gmail.com> Reviewed-on:
	http://openocd.zylin.com/215 Tested-by: jenkins Tested-by: Øyvind
	Harboe <oyvindharboe@gmail.com> Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com>

2011-11-23  Antonio Borneo <borneo.antonio@gmail.com>

	* : TCL/SPEAr: fix name of included file Fix error introduced in recent commit.  Correct the name of the
	board file.  Change-Id: I46bca8329812fb24bc4f8d316be9e7cba9b56496 Signed-off-by:
	Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on:
	http://openocd.zylin.com/234 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-18  Antonio Borneo <borneo.antonio@gmail.com>

	* : TCL: Add board file for EVALSPEAr300 Initial support for SPEAr300 chip and for evaluation board named
	EVALSPEAr300.  Currently supports only those parts in common with
	SPEAr310.  Change-Id: I8075aa721cf3dfaac561ee51e5df4ce9a2992e3e Signed-off-by:
	Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on:
	http://openocd.zylin.com/230 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-21  Antonio Borneo <borneo.antonio@gmail.com>

	* : TCL/SPEAr: move DDR activation in common code DDR controller activation should not be in DDR chip specific code,
	but in generic DDR controller part.  Change-Id: If1b178228352b48b0097d7b9b300005fb5bb4fb6 Signed-off-by:
	Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on:
	http://openocd.zylin.com/228 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-01-21  Antonio Borneo <borneo.antonio@gmail.com>

	* : TCL/SPEAr: move device generic code The initialization of RAS enable and clock is required by all
	SPEAr3xx devices Change-Id: Iea4cd0902e4da219475d7f35b4c25fc87ec6b902 Signed-off-by:
	Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on:
	http://openocd.zylin.com/226 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2010-11-27  Antonio Borneo <borneo.antonio@gmail.com>

	* : TCL/SPEAr: Add reference to ST Application Note ST-AN was mentioned but there was no reference Change-Id: Ie065f8faba94d63cf391a994ec895692d499394e Signed-off-by:
	Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on:
	http://openocd.zylin.com/224 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-15  Spencer Oliver <spen@spen-soft.co.uk>

	* : usbprog: fix shadowed declaration warning see Trac #38 Change-Id: If86fda797391f10d745384794b68e60380ef0b21 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/204 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2011-11-16  Mauro Gamba <maurillo71@gmail.com>

	* : libusb-1.0 support The configuration script check for libusb-1.0 availability first and
	only if not found check for libusb-0. So if both libraries are
	installed on the system the build script will use libusb-1.0 It's
	possible to force compiling with libusb-0 with the --enable-libusb0
	switch.  If the driver support only libusb0 the script check anly
	for it.  Change-Id: I7eb045d4e2bd553abefad53f3f4023ff46b0f5f6 Signed-off-by:
	Mauro Gamba <maurillo71@gmail.com> Reviewed-on:
	http://openocd.zylin.com/33 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-18  Spencer Oliver <spen@spen-soft.co.uk>

	* : Revert "build: fix gcc 4.6.2 warnings" This reverts commit 0ef5a90d93c5a026bcf70132e60e957ae339d1e1 Causes older versions of gcc to break - need to look into a better
	fix.  This passed through the jenkins build as we originally did not build
	this module - we do now.  Change-Id: Iafeac8442b2249269ff45a52ccd3e2870920f635 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/214 Tested-by: jenkins

2011-11-14  Robert Pasz <kiurcher@users.sf.net>

	* : presto: fix tms_sequence short issue fix issue when using tms_sequence short see Trac #31 Change-Id: I22a9cd2af59eae4d8a276dae60b6a99d05af53bb Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/201 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2011-11-14  Philip Nye <philipnye@users.sf.net>

	* : gdb: fix multi core gdb issue gdb_memory_map() correctly calculates the target specific number of
	flash banks, but then uses the total number (all targets) instead of
	the target specific number to construct its GDB response, causing a
	crash.  Change-Id: I3f8639b3e90303a59753ebe140ce4fff96fd5db0 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/199 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2011-11-14  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: match stm32f2x loader src name Change-Id: I60523f809f2d9ec9c9283e0456746ce9a63576a7 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/196 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2011-11-17  Felix Ruess <felix.ruess@gmail.com>

	* : config: do not use deprecated stm32.cfg Change-Id: Id72d2d7f874043331ecb5586a3797d017606129e Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Signed-off-by: Felix Ruess
	<felix.ruess@gmail.com> Reviewed-on: http://openocd.zylin.com/212
	Tested-by: jenkins

2011-11-16  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : bitq: make private functions static Change-Id: I3fabbdbda4ba8ba6557d79b97444fe06f1710b58 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/209 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-16  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : bitq: remove the remaining static variables in_mask and in_idx are just another encoding of the same state
	information that is already kept in bitq_in_state.bit_pos so derive
	them from that instead of maintaining them separately.  Change-Id: I4ac6bbe923698a8c1090a785b8babcbb90f82931 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/207 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-15  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : bitq: remove a static variable in_buff is only ever set to field->in_value and that pointer is
	still available when the parsing is restarted so it could just as
	well be used directly, removing the need for the static variable.  Change-Id: I3dd7a8315ed5c5bdc3bfb74044f89492bca9816c Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/206 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-13  Tomas Frydrych <tomas@sleepfive.com>

	* : kinetis flash: use longword write when writing into pflash Check whether the destination is in the program flash or NVM
	regions, in the former case, use the normal longword mechanism, not
	the fast NVM write.  Change-Id: I7366b7c8919928ee690252df83b99701776aee82 Signed-off-by:
	Tomas Frydrych <tomas@sleepfive.com> Reviewed-on:
	http://openocd.zylin.com/194 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-10-17  Aurelien Jacobs <aurel@gnuage.org>

	* : at91sam7: ensure probed flash bank has a name (fix a segfault) Before this commit, openocd used to segfault when probing flash of
	an at91sam7x512 (which contains 2 banks of flash). This was due to
	the way it systematically insert a new flash bank without setting
	its name.  Then, when get_flash_bank_by_name_noprobe() is called, it
	is doing a strcmp() on the non-initialized bank->name.  This commit prevents allocation of second probed bank if it is
	already allocated (for example, if it is set in a target config
	file). If a new bank really needs to be allocated, it ensures that a
	default name is set.  Change-Id: I38d15bef1fda2ec746efad37171975136cf7b371 Signed-off-by:
	Aurelien Jacobs <aurel@gnuage.org> Reviewed-on:
	http://openocd.zylin.com/171 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-10  yvind Harboe <oyvind.harboe@zylin.com>

	* : image: remove assignments to local variables that is never read Change-Id: I1a5e968f165e060fd4aa7c023ad870a9e21bb5dd Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/191 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-07  yvind Harboe <oyvind.harboe@zylin.com>

	* : svf: fix warnings Change-Id: Ib7f67612db3a865f9acc5ae349455da7ddcd3348 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/177 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-09  Spencer Oliver <spen@spen-soft.co.uk>

	* : docs: remove berlios related info Change-Id: I9593eb165fce51411f20fa068e324b3fd882cdb3 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/190 Tested-by: jenkins

2011-10-22  Kyle Manna <kyle.manna@fuel7.com>

	* : contrib: Add udev rules for TI xds100v2 debugger This corrects permissions on the FTDI chip on the xds100v2 debugger
	enabling normal users to access it.  Change-Id: I0f6618692ebdee6284eee28f9e612e68782c4d78 Signed-off-by:
	Kyle Manna <kyle.manna@fuel7.com> Reviewed-on:
	http://openocd.zylin.com/188 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-08  yvind Harboe <oyvind.harboe@zylin.com>

	* : buspirate: add missing error propagation found by clang.  Change-Id: I80ea8e6afc8dcc1aa7edb6f63af0d94f6781b81c Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/182 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-08  yvind Harboe <oyvind.harboe@zylin.com>

	* : em357: fix warning by removing unused local variables Change-Id: I9def63d36ed4fa8bf9cdeeedc18b1b25d0e487d6 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/184 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-03  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: update luminary device table add support for checking target against the device CLASS rather then
	just the PARTNO.  This change also adds the new LM4F family (Blizzard).  Change-Id: Ia9d1e33f1f1c2817c0039a2232ecf932fae072f9 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/161 Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com>

2011-10-17  Aurelien Jacobs <aurel@gnuage.org>

	* : at91sam7: add a new target config file for at91sam7x512 The main difference with at91sam7x256 is the declaration of the
	second bank of flash.  Change-Id: I87a20dcbb639b797799139ccf46cc73934fa3b9e Signed-off-by:
	Aurelien Jacobs <aurel@gnuage.org> Reviewed-on:
	http://openocd.zylin.com/173 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-07  yvind Harboe <oyvind.harboe@zylin.com>

	* : xsvf: add missing error propagation Change-Id: Ibc70deb980d6d18ceb376b72d9104e6180b16acf Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/176 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-10-31  yvind Harboe <oyvind.harboe@zylin.com>

	* : str9x: explain compiler that a local variable will always be
	initialized Change-Id: I9ddb2793b4cdbf6acea6f69973531491e4ebcc5b Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/145 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-07  yvind Harboe <oyvind.harboe@zylin.com>

	* : str7x: fix error propagation stick to convention of "retval" being used as error value to be
	propagated and use "flash_flags" local variable for flash flags read
	from how.  Change-Id: I63f1f2248b4f4538d6cd7634ae277f7c0aadc346 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/178 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-07  yvind Harboe <oyvind.harboe@zylin.com>

	* : ecos: add missing error propagation Change-Id: Ib34815c9cf654517f22486a7c8001fdb7471338c Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/174 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-10-31  yvind Harboe <oyvind.harboe@zylin.com>

	* : warning fix: add self-consitency check to remove warning verify promise of code that more code can be pasted with an assert
	at the end condition of the code passage that builds string.  Change-Id: I76a4e5f91b9142fff932e1493cb43c29eb6a0f80 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/143 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-11-04  Spencer Oliver <spen@spen-soft.co.uk>

	* : tools: fix permissions Change-Id: I9419138dd2972304daf215594ca917ac8eb7fcda Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2011-11-03  yvind Harboe <oyvind.harboe@zylin.com>

	* : etm: fix warning by removing assignment that is immediately
	overwritten Change-Id: Ia3a83d3c1fc3a1707d69017fce6cf142a81babc4 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/165 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-01  yvind Harboe <oyvind.harboe@zylin.com>

	* : dsp5680xx: add missing and broken error propagation found by clang.  Change-Id: Ie7e2ecad71bf0838ece93727e4778ad368b890ef Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/156 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-03  yvind Harboe <oyvind.harboe@zylin.com>

	* : avr32_regs: add missing error propagation Change-Id: Ie8b141dd534d73eccfc045069d5f628bd1eea88e Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/166 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-02  yvind Harboe <oyvind.harboe@zylin.com>

	* : HACKING: all you need is http access Change-Id: I191c1da5126c4c9ea1ff8826576b6b24feaf9881 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/157 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2011-11-03  Spencer Oliver <spen@spen-soft.co.uk>

	* : tools: add checkpatch script Change-Id: I3579028fc1c6ee8bea58c82e5f0eecba7794d7cb Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2011-11-01  Spencer Oliver <spen@spen-soft.co.uk>

	* : cfg: add Stellaris LM4F232 Evaluation Kit config Change-Id: Ica754897bef6573a0738ed1afdfe1dfda07292fd Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/151 Tested-by: jenkins Reviewed-by: Andreas
	Fritiofson <andreas.fritiofson@gmail.com>

2011-11-01  Mark Vels <mark.vels@team-embedded.nl>

	* : tx27stk5: add board init support for KaRo TX27 CPU module This patch adds support for a KaRo TX27 CPU module on a StarterkitV
	base board.  The register settings have been extracted from a
	RedBoot distribution that is distributed along with the hardware by
	KaRo.  This setup has been tested with a JTAGKey. The testing has been
	focussed on loading a program into memory and start execution.
	Although the flash seems to be correctly detected, no effort has
	been put in testing the NAND programming yet.  Change-Id: Ib17763f1e3ecacd0eb9b5fdc32f8cba7a5e59be5 Signed-off-by:
	Mark Vels <mark.vels@team-embedded.nl> Reviewed-on:
	http://openocd.zylin.com/158 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-01  yvind Harboe <oyvind.harboe@zylin.com>

	* : cortex_a: add missing error propagation found by clang.  Change-Id: I50eac219d7540fd48d3285f3f213cb659492d0c0 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/153 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-01  yvind Harboe <oyvind.harboe@zylin.com>

	* : arm11: print next address to debug fixes clang warning. Basically the next address pointer is not used
	for anything in the fn, except to be examined in debug.  Change-Id: I253519b8e49e54490bbe7da8ec3d2dd31f49052a Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/155 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-11-01  yvind Harboe <oyvind.harboe@zylin.com>

	* : target: fix null pointer exception check if no target is selected and return error.  Change-Id: Ie8abb63c708d09572b45e88fc6766af108715077 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/148 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-10-31  Spencer Oliver <spen@spen-soft.co.uk>

	* : target: rename cortex_m3.[ch] to cortex_m.[ch] This rename is in preparation for cortex_m4 support.  Change-Id: Ic08c298ec6ed2aabc2c39db67191f68b3a51f550 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/147 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-10-31  yvind Harboe <oyvind.harboe@zylin.com>

	* : warnings: null pointer check fix rewrite broken null pointer check code by reducing scope of
	variable.  Change-Id: I8254f6849b187e5c9cd083053cdc11973c6fe339 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/142 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-10-27  yvind Harboe <oyvind.harboe@zylin.com>

	* : bugfixes: tinker a bit with the targets command return error when target can not be found instead of ERROR_OK, split
	fn.  Change-Id: Iba5232d3862a490d0995c3bfece23685bd6856e3 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/131 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-10-30  Uwe Hermann <uwe@hermann-uwe.de>

	* : interface configs: Fix whitespace and other issues.  Change-Id: I98825c7fb9bdee75b69b06005ed12a3f64ec4db4 Signed-off-by:
	Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on:
	http://openocd.zylin.com/139 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2011-10-29  yvind Harboe <oyvind.harboe@zylin.com>

	* : clang: fix warning by adding assert that shows that a variable
	is used Change-Id: I26e0ba9f1ae9d43c9a14c42c4225746782dc4d66 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/134 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-10-27  yvind Harboe <oyvind.harboe@zylin.com>

	* : bugfixes: numerous bugs in error propagation found by clang Change-Id: I784068325b422d1918e28c08544bc5a1332d712f Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/130 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-10-26  Jim Norris <u17263@att.net>

	* : Remove use of undefined variable.  Change-Id: Id8fd345438c360b2a42857525f05360ce2794d21 Signed-off-by:
	Jim Norris <u17263@att.net> Reviewed-on:
	http://openocd.zylin.com/127 Reviewed-by: Peter Stuge
	<peter@stuge.se> Tested-by: jenkins

2011-10-25  Jim Norris <u17263@att.net>

	* : Add configuration for ATMEL SAM3N-EK board.  Change-Id: I525f6c346cace4e54f47659c5a7aceb29ee4baf2 Signed-off-by:
	Jim Norris <u17263@att.net> Reviewed-on:
	http://openocd.zylin.com/125 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-10-25  Marti Bolivar <mbolivar@leaflabs.com>

	* : stm3220g_eval.cfg: fix CHIPNAME.  The STM3220G-EVAL board has an STM32F207IGH6. ("...H6", not
	"...T6").  Change-Id: Iaf3dae6830c5c0685a1dcd1588d391434bc51be7 Signed-off-by:
	Marti Bolivar <mbolivar@leaflabs.com> Reviewed-on:
	http://openocd.zylin.com/120 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-10-25  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : armv7a: make local functions static Also fix a spelling error and remove the declaration for a
	non-existent function from the header.  Change-Id: I13177e2d81aa167c05c1cc766f06924211e6d735 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/118 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-10-22  Freddie Chopin <freddie.chopin@gmail.com>

	* : Fix "Evaluate 'script' in the global scope" This fixes commit Evaluate 'script' in the global scope. It caused
	Windows builds behave differently than before because path was
	evaluated twice and backslashes from Windows' paths got unescaped
	and effectively wiped out.  Configs could only be passed with "-f
	../dir/config.cfg" or "-f ..\\dir\\config.cfg" instead of usual "-f
	dir/config.cfg" (or using backslash) as previously.  Change-Id: I13b4abac6dbe6d770cc11a4e61c9421ef340da83 Author: Steve
	Bennett <steveb@workware.net.au> Signed-off-by: Freddie Chopin
	<freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/40
	Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
	Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>

2011-10-23  Antonio Borneo <borneo.antonio@gmail.com>

	* : SERVER: fix clang warning The fix is inline with the Linux coding style that forbids
	assignment in if condition Change-Id: I0b9d0b419d9c8b7a8c755e048d5faf72d1658ba2 Signed-off-by:
	Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on:
	http://openocd.zylin.com/87 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-10-23  Antonio Borneo <borneo.antonio@gmail.com>

	* : NOR/CORE: fix clang warning The fix is inline with the Linux coding style that forbids
	assignment in if condition Change-Id: I10338a249bcfeff87d8596f7e17f209e26b41678 Signed-off-by:
	Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on:
	http://openocd.zylin.com/86 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-10-23  Antonio Borneo <borneo.antonio@gmail.com>

	* : FLASH/CFI: fix clang warnings Total of 5 warnings: 3x "Dead store": removed dead assignment to
	variable; 1x "Dereference of null pointer": this is not an error,
	   but a limited visibility of clang, since pointer erase_region_info    is initialized inside cfi_fixup_non_cfi(); 1x "Branch condition
	   evaluates to a garbage value": this is a real coding bug that could
	   issue SIGSEGV, since "goto cleanup" can be executed before
	   initialization of "source".  Change-Id: Id3c323c82bb15cbd3bb8fc04b23541f11145f109 Signed-off-by:
	Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on:
	http://openocd.zylin.com/84 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-10-22  yvind Harboe <oyvind.harboe@zylin.com>

	* : fm3: fix warning for superfluous assignment Change-Id: I4f8e8c2e676a2728ddc6227daf9ca6a7ceb3d505 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/46 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-10-22  yvind Harboe <oyvind.harboe@zylin.com>

	* : tms470: remove dead assignment warning Change-Id: I21e7ac47f80d93c9c0d7b169f8848b929c664b20 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/45 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-10-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : clang: fix warning w/assert so that clang knows that there will
	be no division by zero Change-Id: I98ac62a22f21043bb535a667a4f1f1537ccde2a4 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/42 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-10-23  Edgar Grimberg <edgar.grimberg@gmail.com>

	* : tms470: removed unnecessary operations This should silence a warning.  Change-Id: Id91a9ebacae836083b1db2654a8e7bf24b2300e9 Signed-off-by:
	Edgar Grimberg <edgar.grimberg@gmail.com> Reviewed-on:
	http://openocd.zylin.com/52 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-10-22  yvind Harboe <oyvind.harboe@zylin.com>

	* : buspirate: ignore return value and fix warning Perhaps we could do one better and propagate the error? Change-Id: Idc45f516c26f09de4ee01fe05e8d3475f4b80db3 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/43 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-10-22  yvind Harboe <oyvind.harboe@zylin.com>

	* : server: remove warning due to dead assignment Change-Id: Idb08aef0c11b3fae92286e8fcea61ab09ab09e74 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/44 Reviewed-by: Peter Stuge
	<peter@stuge.se> Tested-by: jenkins

2011-10-20  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : rtos: remove broken code for handling the deprecated qP packet Change-Id: Icca522c1e2a2877abb20665b171c61079b1d8f48 Signed-off-by:
	Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on:
	http://openocd.zylin.com/37 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2011-10-19  Freddie Chopin <freddie.chopin@gmail.com>

	* : Unused variables Fix a few errors with set and unused variables detected by GCC 4.7.0 Change-Id: I59b748e18e514ee9f0cde7883b4ed5116198bd4a Signed-off-by:
	Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on:
	http://openocd.zylin.com/36 Tested-by: jenkins Reviewed-by: Spencer
	Oliver <spen@spen-soft.co.uk>

2011-10-19  Uwe Hermann <uwe@hermann-uwe.de>

	* : TMPA900/910 MCUs are always little endian.  Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Change-Id:
	I8839f2cf0faf1b5ba9f99901c5ee028b199fabd2 Reviewed-on:
	http://openocd.zylin.com/35 Tested-by: jenkins Reviewed-by: Peter
	Stuge <peter@stuge.se>

2011-09-19  Matt Reimer <mreimer@sdgsystems.com>

	* : xscale: fix bug in xscale_receive() The code in xscale_receive() that tries to skip invalid reads (i.e.
	reads that don't have the DBG_SR[0] 'valid' bit set) seems to be
	wrong, as it only looks at the first word's valid flag rather than
	each word's own valid flag. Am I reading the code correctly? If so,
	the attached patch should fix it.  If this looks correct, I'll generate a proper patch and commit
	message.  Matt Change-Id: I74ebe2ad7a36d340a9dd3b8487578b6ea7f3cf1e Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/32 Tested-by: jenkins Reviewed-by: Øyvind
	Harboe <oyvindharboe@gmail.com>

2011-10-17  Spencer Oliver <spen@spen-soft.co.uk>

	* : luminary: add peripheral reset script some luminary device classes require a reset script to emulate a
	hardware reset.  Change-Id: Id505c92451244b48b0238c2130aebab2df8d208b Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/30 Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com> Tested-by: Øyvind Harboe
	<oyvindharboe@gmail.com>

2011-10-02  Karl Kurbjun <kkurbjun@gmail.com>

	* : ICEPick-C: Add support for warm reset through JTAG controller
	and provide finer detail functions.  This sets up simple functions that can later be used to provide
	additional ICEPick Operations.  Change-Id: I313b8679267696fad87d23f3692963e513f2fe21 Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on:
	http://openocd.zylin.com/22 Tested-by: Øyvind Harboe
	<oyvindharboe@gmail.com> Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com>

2011-10-14  yvind Harboe <oyvind.harboe@zylin.com>

	* : target_request: add target_got_message() that can be used to
	improve DCC performance API change to allow implementing a back-off algorithm for polling
	hardware.  Change-Id: I6cbe8b4534c8dfeb8442305171ea96b5481c1f17 Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/26 Reviewed-by: Øyvind Harboe
	<oyvindharboe@gmail.com> Tested-by: Øyvind Harboe
	<oyvindharboe@gmail.com>

2011-10-14  Jim Norris <u17263@att.net>

	* : Add some more detail for setting up Gerrit account.  1) Add a couple more steps when setting up the Gerrit account.  Change-Id: I5d81feac4650d4d28653d14cfc0baf14270424c1 Signed-off-by:
	Jim Norris <u17263@att.net> Reviewed-on: http://openocd.zylin.com/28
	Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: Peter Stuge
	<peter@stuge.se>

2011-10-14  Spencer Oliver <spen@spen-soft.co.uk>

	* : flash: fix lpc2000 driver typo Change-Id: I3a759ed98a27fd186c12355b846d5e97dba86c5b Signed-off-by:
	Spencer Oliver <spen@spen-soft.co.uk>

2011-10-14  Uwe Hermann <uwe@hermann-uwe.de>

	* : Add a board file for the Glyn Tonga2.  This is a Toshiba TMPA900CMXBG (ARM9) based SO-DIMM CPU module with
	64MB DDR SDRAM, 256MB NAND flash, and on-board Ethernet.  The board file provides a tonga2_init function which sets up the
	PLL/clocks and memory (SDRAM and SRAM), which allows writing a
	boot-loader into RAM via JTAG.  Change-Id: I60522b97997bdf50e1f25aebab910d93a98522fb Signed-off-by:
	Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on:
	http://openocd.zylin.com/19 Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk> Tested-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2011-10-03  Michel Jaouen <michel.jaouen@stericsson.com>

	* : breakpoint : smp software breakpoint issue Change-Id: Iefe78bad71d4fdb38ae412ab8fe2f6282836c22e Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on:
	http://openocd.zylin.com/14 Tested-by: Spencer Oliver
	<spen@spen-soft.co.uk> Reviewed-by: Spencer Oliver
	<spen@spen-soft.co.uk>

2011-10-12  yvind Harboe <oyvind.harboe@zylin.com>

	* : docs: update HACKING to point to Gerrit Change-Id: If79e86c731ac06aaefca1aebde40e7cb3de68e4d Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com>

2011-10-12  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : docs: update project url's Change-Id: I54fc3aff722ed25143aad85e58d19b72fcecbba0 Signed-off-by:
	Spencer Oliver <ntfreak@users.sourceforge.net>

2011-10-11  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : replace berlios url's with sourceforge url's Change-Id: I1c9957bb64df87cee7c5e832f21453eb8934a5fb Signed-off-by:
	Spencer Oliver <ntfreak@users.sourceforge.net>

2011-07-31  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : stm32f1x: use async algorithm in flash programming routine Let the target algorithm be running in the background and buffer
	data continuously through a FIFO. This reduces or removes the effect
	of latency because only a very small number of queue executions
	needs to be done per buffer fill. Previously, the many repeated
	target state changes, register accesses (really inefficient) and
	algorithm uploads caused the flash programming to be latency bound
	in many cases. Now it should scale better with increased throughput.  Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

2011-07-15  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : cortex_m3: use armv7m's async algorithm implementation Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

2011-07-15  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : target: add async algorithm entries to the target type On supported targets, this may be used to start a long running
	algorithm in the background so the target may be interacted with
	during execution and later wait for its completion.  The most obvious use case is a double buffered flash algorithm that
	can upload the next block of data while the algorithm is flashing
	the current.  Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

2011-09-16  Simon Barner <barner@gmx.de>

	* : arm-jtag-ew: Formatting

2011-09-16  Simon Barner <barner@gmx.de>

	* : arm-jtag-ew: Emit a warning if interface firmware version != 1.6

2011-09-16  Simon Barner <barner@gmx.de>

	* : arm-jtag-ew: Provide armjtagew_speed_div() in order to fix
	interactive use of `adapter_khz'

2011-09-16  Simon Barner <barner@gmx.de>

	* : arm-jtag-ew: Fix setting interface speed (1/2) CMD_SET_TCK_FREQUENCY message length is 5, not 4 - Ticket: #34

2011-09-16  Clment Burin des Roziers <clement.burin-des-roziers@hikob.com>

	* : STM32L: Added flash driver and target Added the flash driver for the STM32L family, which highly differ
	from the STM32F family.  Added the TCL target file for JTAG access.

2011-09-19  Michel Jaouen <michel.jaouen@stericsson.com>

	* : u8500 : config for L2 cache

2011-09-29  Steve Bennett <steveb@workware.net.au>

	* : jim-nvp is moving from jimtcl to openocd The jim-nvp code is specific to openocd, so it belongs in openocd,
	not in the core jimtcl.  Signed-off-by: Steve Bennett <steveb@workware.net.au>

2011-09-21  Mathias K <kesmtp@freenet.de>

	* : add target events, run algorithm and default r/w buffer api Target events are added to get better gdb support. The run algorithm
	functionality are implemented to support feature fast flash write
	functionality. The new r/w buffer api is now used to support the
	special memory address handling. The output of the md command was
	fixed.

2011-09-17  Mathias K <kesmtp@freenet.de>

	* : kinetis cpu flash driver Initial release of the freescale kinetis cpu flash driver.

2011-09-12  Mathias K <kesmtp@freenet.de>

	* : kinetis auto mass erase on secured devices This is a proof of concept to get access to the debug port of a
	secured kinetis cpu. On full flash erase the cpu is automatically
	secured and the debug port is not accessible.  To get this to work
	the srst line is needed and the necessary configuration should be
	added to the configuration file.

2011-09-01  Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de>

	* : Add definition for the STEVAL-PCC010 board with the STM32F207

2011-08-31  Martin Schmlzer <martin.schmoelzer@student.tuwien.ac.at>

	* : ULINK driver: Remove typedefs in ulink.c Signed-off-by: Martin Schmölzer
	<martin.schmoelzer@student.tuwien.ac.at>

2011-08-31  Martin Schmlzer <martin.schmoelzer@student.tuwien.ac.at>

	* : ULINK driver: Remove typedefs in OpenULINK firmware USB
	descriptor structures Signed-off-by: Martin Schmölzer
	<martin.schmoelzer@student.tuwien.ac.at>

2011-08-31  Rodrigo L. Rosa <rodrigorosa.LG@gmail.com>

	* : static for some functions made two functions into static, since they are not required by
	anything external

2011-08-31  yvind Harboe <oyvind.harboe@zylin.com>

	* : commit 353362651fc28c1f1d823659cde36dd31d1aede6 Author: Martin
	Schmoelzer <martin.schmoelzer@student.tuwien.ac.at> Date:   Tue Aug
	23 17:22:53 2011 +0200

2011-08-04  Martin Schmoelzer <martin.schmoelzer@student.tuwien.ac.at>

	* : ULINK driver: Add '-lm' linker flag when building this driver
	(required for correct calculation of JTAG TCK speed setting) Signed-off-by: Martin Schmölzer
	<martin.schmoelzer@student.tuwien.ac.at>

2011-07-04  Martin Schmlzer <martin.schmoelzer@student.tuwien.ac.at>

	* : ULINK driver: Implement variable TCK frequency in OpenULINK
	firmware Also, speed up jtag_clock_tck() significantly (150 kHz -> 375 kHz) Signed-off-by: Martin Schmölzer
	<martin.schmoelzer@student.tuwien.ac.at>

2011-08-23  Martin Schmoelzer <martin.schmoelzer@student.tuwien.ac.at>

	* : ULINK driver: Implement JTAG_PATHMOVE command Signed-off-by: Martin Schmölzer
	<martin.schmoelzer@student.tuwien.ac.at>

2011-07-04  Martin Schmlzer <martin.schmoelzer@student.tuwien.ac.at>

	* : ULINK driver: Implement command to manually force downloading
	firmware image from arbitrary location Signed-off-by: Martin Schmölzer
	<martin.schmoelzer@student.tuwien.ac.at>

2011-07-04  Martin Schmlzer <martin.schmoelzer@student.tuwien.ac.at>

	* : ULINK driver: Properly propagate return values in
	ulink_execute_queue() Signed-off-by: Martin Schmölzer
	<martin.schmoelzer@student.tuwien.ac.at>

2011-08-31  simonqian.openocd <simonqian.openocd@gmail.com>

	* : vsllink driver compile fails with'vsllink_debug_buffer' defined
	but not used USB communication is handled by code under versaloon directory.  So
	_DEBUG_USB_COMMS_  should not be used in vsllink.c.  Attachment is
	the patch.

2011-08-30  Rodrigo L. Rosa <rodrigorosa.LG@gmail.com>

	* : fix enter debug mode for locking added an alternative way to enter debug mode, which does not require
	restarting the chip.  this will not always work, but in general it
	will (failure 0.3%), and failure is not a dramatic issue, simply
	have to use the full sequence.  the user can only access "halt",
	which uses the full sequence, so the user should not have any
	problems.  restarting the chip requires reconfiguring the flash
	module. the doc is very poor, so i'd rather have the two methods,
	and live with the 0.3%.

2011-08-30  Rodrigo L. Rosa <rodrigorosa.LG@gmail.com>

	* : fix debug mode,lock,unlock got new info regarding setting the chip to debug mode, and
	locking/unlocking flash memory.  the newer implementation is a bit
	slower, but always works.  the previous implementation would
	randomly (as once every 25k-70k times) get the chip into a state
	where the freescale tool would be necessary. this is fixed now.  added functions to play around with the jtag state machine. they are
	not the happiest, but are necessary to be able to execute the
	halting/locking/unlocking sequences.  Conflicts: 	src/target/dsp5680xx.c

2011-08-30  Rodrigo L. Rosa <rodrigorosa.LG@gmail.com>

	* : optional crc for flash writing crc check was always performed on newly flashed data, now it is
	optional flash mem can be locked by writing a specific word to a
	specific address in flash.  to verify flash, target must be halted,
	and this will (when the new halt sequence is implemented) require
	reseting the chip. if the target is reset after writing the lock
	words, then it will lock, hence the CRC will fail because it is not
	possible to read stuff from the target.  also added a function that resets the jtag state machine.  this is
	not used yet, but will be soon.  it is implemented to allow strict
	control over JTAG state machine, necessary to implement to halt and
	unlocking sequences.

2011-08-15  Rodrigo L. Rosa <rodrigorosa.LG@gmail.com>

	* : dsp568013 disable polling by default

2011-08-26  Evan Hunter <ehunter@broadcom.com>

	* : Fix off by one bug in FreeRTOS

2011-08-24  Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>

	* : This will add the Value Line HD of stm32 devices.  This has been tested on STM32F100VE

2011-07-18  Evan <evan@evan-VirtualBox.(none)>

	* : Add suspended task list to FreeRTOS support

2011-08-22  Jim Paris <jim@jtan.com>

	* : Fix redbee config files Currently the board/redbee-*.cfg files incorrectly include the
	interface definition.  Move the interfaces to interface/, and create
	a single board/redbee.cfg that is common to both boards.  Intended
	  usage is now: openocd -f interface/redbee-econotag.cfg -f
	board/redbee.cfg

2011-08-20  olivier Schonken <olivier.schonken@gmail.com>

	* : Fix Sam3u flash bank 1 issue

2011-08-17  Jie Zhang <jie.zhang@analog.com>

	* : remove white space before TAB

2011-07-12  SimonQian <simonqian@simonqian.com>

	* : versaloon driver update Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-08-16  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : build: rename configure.in to configure.ac configure.ac is the correct name to use with modern autotools.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-08-15  Jie Zhang <jie.zhang@analog.com>

	* : show git commit number even when cross-compiling AC_CHECK_FILE will die when cross-compiling. So don't use it to test
	the existence of guess-rev.sh.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-08-10  Stefan Mahr <stefan.mahr@sphairon.com>

	* : mips: fix potential alignment error

2011-08-10  Stefan Mahr <stefan.mahr@sphairon.com>

	* : target: add helper functions to get/set u16 or u32 array from/to
	buffer

2011-08-10  Jie Zhang <jie.zhang@analog.com>

	* : remove useless pxref to SMP subsection

2011-08-11  Steve Bennett <steveb@workware.net.au>

	* : Evaluate 'script' in the global scope Scripts sourced via 'script' should evaluate in the global scope to
	make it easy to set and reference global variables.  Signed-off-by: Steve Bennett <steveb@workware.net.au>

2011-08-05  Rodrigo L. Rosa <rodrigorosa.LG@gmail.com>

	* : renamed for clarity i had started my code from dsp5683xx, i renamed a bunch of stuff to
	names i consider to be better.  i believe no one is using this code,
	so nobody should be affected. (it's not too late to do this change)

2011-07-17  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : rlink: simplify and optimize queue fill level checks Add a helper function for running the queue if it would overflow
	otherwise.  Use it to simplify the queue fill level checks and
	optimize in a few cases that would previously run the queue
	prematurely.  Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

2011-07-16  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : rlink: remove duplicated code After the reply_index handling is fixed, there's no need to special
	case the out scan.  Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

2011-07-16  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : rlink: more indentation fixes Remove unnecessary block scopes to reduce indentation level.  Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

2011-07-25  Drasko DRASKOVIC <drasko.draskovic@gmail.com>

	* : mips32 : Fixed memory byte access Function mips_m4k_write_memory() does endianess byte swap, but this
	procedure break one byte access (temporary array overwrites content
	in buffer).  As a fix, this endianess swap and buffer affecting is
	preformed only on hword and word accesses (not on byte access).

2011-07-07  Drasko DRASKOVIC <drasko.draskovic@gmail.com>

	* : mips32: Added CP0 coprocessor R/W routines This patch adds MIPS32 CP0 coprocessor R/W routines, as well as
	adequate commands to use these routines via telnet interface.  Now is becomes possible to affect CP0 internal registers and
	configure CPU directly from OpenOCD.

2011-07-05  Drasko DRASKOVIC <drasko.draskovic@gmail.com>

	* : mips32: Removed Unnecessary JTAG Queue Flush jtag_execute_queue() is executed as a part of
	mips_ejtag_drscan_32().  No need for this to be done before -
	removed for optimisation.

2011-08-09  Rodrigo L. Rosa <rodrigorosa.LG@gmail.com>

	* : fix return error msj retval was not correctly propagated

2011-08-09  yvind Harboe <oyvind.harboe@zylin.com>

	* : Revert "dsp5680xx: disable for now, it generates warnings" This reverts commit d567df02b9f3e7d2e7e78b3c2907ecad9aa4bbd4.

2011-07-19  Rodrigo L. Rosa <rodrigorosa.LG@gmail.com>

	* : dsp5680xx fix FM clk before doing anything with the flash module (FM) the clock divider
	must be set.  if erase_check was the first thing done with the FM
	after reset then an error would be generated because the clk divider
	was not set.  now erase_check sets the clk divider.

2011-08-09  Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

	* : Archive and recreate NEWS file.  Archive released NEWS file as NEWS-0.5.0.  Create new NEWS file from
	release script template.

2011-08-09  Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

	* : The openocd 0.5.0 release.  Remove '-dev' version tag: 0.5.0-dev -> 0.5.0

2011-08-03  Luca Bruno <lucab@debian.org>

	* : Automatically generate ChangeLog from git log for release
	tarball make dist should use git2cl to generate ChangeLog from git history,
	populating the placeholder file in released tarball.  Signed-off-by: Luca Bruno <lucab@debian.org> Signed-off-by: Spencer
	Oliver <ntfreak@users.sourceforge.net>

2011-08-01  Jie Zhang <jzhang918@gmail.com>

	* : etb: fix incorrect previous patchset This corrects two issues found with openocd.
	d7f71e7fe9645fa8c3f88cf6fc9ad438aa6708f3 removed some code that was
	being used.  The above then caused even more code to get removed by commit
	1cfb2287a67c1f78b76583b2e5ed83ca3560b0d5.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-07-28  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : docs: remove obsolete luminary target info The lm3s variant is not required as this is handled in the target
	script - see tcl/target/stellaris.cfg.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-07-28  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : cfg: update scripts to use new stm32 driver names Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-07-28  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : flash: update stm32 driver names Use consistent names for the stm32 family flash drivers, eg.  stm32x
	-> stm32f1x stm32f2xxx -> stm32f2x this makes it easier to add support for newer stm32 families.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-07-27  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : doc: add Fujitsu FM3 flash driver info Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-07-21  Jie Zhang <jie.zhang@analog.com>

	* : Update doc about Jim since it's not a single .C file and a
	single .H file any more Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-07-18  Michael Hunold <michael@mihu.de>

	* : CPU name in TMPA900 config file should obviously be TMPA900 (not
	TMPA910).  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-07-18  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : jimtcl: update to support --disable-install-jim Update jimtcl version to commit
	6233a6c5d39928f1bfafa8f41cb1ddf0c5a83de0 This enable to to build
	jimtcl as a submodule but not install it.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-07-09  Luca Bruno <lucab@debian.org>

	* : Do not append git info to version string when building from
	released tarball When building official releases from tarball, git commit info is not
	available in the building environment. Thus, automake should not try
	to append the git commit to the version string.  Signed-off-by: Luca Bruno <lucab@debian.org> Signed-off-by: Spencer
	Oliver <ntfreak@users.sourceforge.net>

2011-07-12  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : busblaster: Fix warnings when building against D2XX The default is -Werror, so warnings become errors.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-07-12  Steve Bennett <steveb@workware.net.au>

	* : ftdi: update for latest libftdi 1.0.4 For libftd2xx1.0.4, which uses a different directory structure than
	libftd2xx0.4.16 Without this fix the build fails with version 1.0.4
	of the driver.  Note that this does not fix --with-ftd2xx-lib=shared Signed-off-by: Steve Bennett <steveb@workware.net.au> Signed-off-by:
	Spencer Oliver <ntfreak@users.sourceforge.net>

2011-07-04  Drasko DRASKOVIC <drasko.draskovic@gmail.com>

	* : mips_m4k and arm7_9 : Fix soft bkpt endianess for 16-bit
	instructions The patch fix comparison of target data on the host by using
	target_buffer_get_u16() to transform current_instr to _host_
	endianess before comparison.

2011-07-04  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : Revert "cortex_m3: add auto maskisr" This reverts commit ff640f197a9a343b2f3ed10e9174e35282334e8c.  Original patch reverted as Author's name was incorrectly set.

2011-06-29  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : jimtcl: update to 0.71 based release The actual release is 411e92fea9621630eb350e0c2bb43543e553b84f as we
	had a few issues relating to its use within openocd.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-06-28  yvind Harboe <oyvind.harboe@zylin.com>

	* : mips4k: fix big-endian hosts and host alignment problems the code was making assumptions about the endianness of the host.

2011-06-28  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : cortex_m3: add auto maskisr This patch extends the cortex_m3 maskisr command by a new option
	'auto'.  The 'auto' option handles interrupts during stepping in a
	way they are processed but don't disturb the program flow during
	debugging.  Before one had to choose to either enable or disable interrupts. The
	former steps into interrupt handlers when they trigger. This
	disturbs the flow during debugging, making it hard to follow some
	piece of code when interrupts occur often.  When interrupts are disabled, the flow isn't disturbed but code
	relying on interrupt handlers to be processed will stop working. For
	example a delay function counting the number of timer interrupts
	will never complete, RTOS task switching will not occur and output
	I/O queues of interrupt driven I/O will stall or overflow.  Using the 'maskisr' command also typically requires gdb hooks to be
	supplied by the user to switch interrupts off during the step and to
	enable them again afterward.  The new 'auto' option of the 'maskisr' command solves the above
	problems. When set, the step command allows pending interrupt
	handlers to be executed before the step, then the step is taken with
	interrupts disabled and finally interrupts are enabled again. This
	way interrupt processing stays in the background without disturbing
	the flow of debugging. No gdb hooks are required. The 'auto' option
	is the default, since it's believed that handling interrupts in this
	way is suitable for most users.  The principle used for interrupt handling could probably be used for
	other targets too.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-06-27  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : build: cleanup jimtcl generated configure.gnu We use configure.gnu to pass options to the jimtcl submodule.  Make
	sure a distclean removes any generated files Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-06-20  Martin Schmlzer <martin.schmoelzer@student.tuwien.ac.at>

	* : Add OpenULINK driver files generated by SDCC to .gitignore

2011-06-20  Martin Schmlzer <martin.schmoelzer@student.tuwien.ac.at>

	* : Include ULINK driver in src/jtag/drivers/Makefile.am A new variable "nobase_dist_pkglib_DATA" is introduced to install
	the OpenULINK firmware image to
	$PREFIX/lib/openocd/OpenULINK/ulink_firmware.hex Also, the variable "EXTRA_DIST" is used to include the OpenULINK
	firmware source in the OpenOCD source distribution.

2011-06-20  Martin Schmlzer <martin.schmoelzer@student.tuwien.ac.at>

	* : Include ULINK driver in configure.in

2011-06-20  Martin Schmlzer <martin.schmoelzer@student.tuwien.ac.at>

	* : Include ULINK driver in src/jtag/interfaces.c

2011-06-20  Martin Schmlzer <martin.schmoelzer@student.tuwien.ac.at>

	* : Add source code for new ULINK driver

2011-06-17  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : build: do not included generated files in distribution We have to use this method as automake seems to ignore nodist_ on
	libs.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-06-17  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : build: pass correct flags to jimtcl during make distcheck This is only for the case of a make distcheck.  During a normal
	release build these flags will be created by configure.gnu Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-06-16  Tomek CEDRO <cederom@tlen.pl>

	* : ADAPTER: Fixed transport selection mechanism to support
	transports other than jtag (if defined).

2011-06-15  Dale Lukas Peterson <hazelnusse@gmail.com>

	* : Added Olimex STM32 {H,P}107.cfg board

2011-06-12  yvind Harboe <oyvind.harboe@zylin.com>

	* : HACKING: add tip on how to write comments

2011-06-10  Rodrigo L. Rosa <rodrigorosa.lg@gmail.com>

	* : doxy more

2011-06-10  Rodrigo L. Rosa <rodrigorosa.lg@gmail.com>

	* : fix protection behavior

2011-06-10  Rodrigo L. Rosa <rodrigorosa.lg@gmail.com>

	* : flash speed improved

2011-06-10  Rodrigo L. Rosa <rodrigorosa.lg@gmail.com>

	* : cleanup flash module command

2011-06-10  Rodrigo L. Rosa <rodrigorosa.lg@gmail.com>

	* : fix read speed improved by queueing commands

2011-06-10  Rodrigo L. Rosa <rodrigorosa.lg@gmail.com>

	* : Added minimodule (ftdi) interface

2011-06-06  Laurent Charpentier <laurent_pubs@yahoo.com>

	* : Added configuration file for stm32f2xxx.

2011-06-03  Freddie Chopin <freddie_chopin@op.pl>

	* : Fix "unused variable" warnings (errors) detected with GCC 4.7.0
	- leftover changes

2011-06-02  Rodrigo L. Rosa <rodrigorosa.lg@gmail.com>

	* : crc check on flashed data

2011-06-03  Freddie Chopin <freddie_chopin@op.pl>

	* : Fix "unused variable" warnings (errors) detected with GCC 4.7.0
	- dubious fixes

2011-06-02  Bear <jilingshu@gmail.com>

	* : uptech2410

2011-05-31  Stefan Mahr <stefan.mahr@sphairon.com>

	* : mips: fixup fastdata fixup fastdata

2011-05-31  Laurent Charpentier <laurent_pubs@yahoo.com>

	* : bootstrap: fix argument handling - no argument => run submodule init - "nosubmoudle" => do not run submodule - other values => error message

2011-05-29  Stefan Mahr <stefan.mahr@sphairon.com>

	* : mips: fix swapping if running on big endian host

2011-05-28  Damjan Marion <damjan.marion@gmail.com>

	* : Fixed values for Samung NAND chips

2011-05-23  Damjan Marion <damjan.marion@gmail.com>

	* : Reorganize NAND flash table - added manufacturer field - name moved to the end for better text alignment

2011-05-23  Alan Bowman <alan.michael.bowman@gmail.com>

	* : Report actual current thread

2011-05-24  Stefan Mahr <stefan.mahr@sphairon.com>

	* : add support for spansion flash on mindspeed c300 eval board Signed-off-by: Stefan Mahr <stefan.mahr@sphairon.com>

2011-05-23  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : Fix build issue under cygwin cygwin does not define sleep, so use our internal win32 version.
	caused by commit 9d4aec6bda90ad39a140747ea270c6a09dd26440 Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-05-03  Jie Zhang <jie.zhang@analog.com>

	* : Get register value if it's invalid in cache.

2011-05-17  Rodrigo L. Rosa <rodrigorosa.lg@gmail.com>

	* : flash support (only full erase/write) for 568013 and 568037

2011-05-11  Alan Bowman <alan.michael.bowman@gmail.com>

	* : Correct stacking direction and use of address offset

2011-05-04  yvind Harboe <oyvind.harboe@zylin.com>

	* : beagleboard: add support for various icepick versions The beagleboard icepick jtag tap id's vary.

2011-04-27  Alexandre Pereira da Silva <aletes.xgr@gmail.com>

	* : Add support for the lpc2460 target

2011-05-03  Jie Zhang <jie.zhang@analog.com>

	* : Remove useless MIPS code in avr32_ap7k.c.

2011-04-28  yvind Harboe <oyvind.harboe@zylin.com>

	* : ecos: add 64 bit types for sprintf/sscanf

2011-04-19  Michel Jaouen <michel.jaouen@stericsson.com>

	* : gdb_server : 'R' command replied by OK

2011-04-19  Michel Jaouen <michel.jaouen@stericsson.com>

	* : smp : infra for smp minimum support

2011-04-24  SimonQian <SimonQian@SimonQian.com>

	* : add STM32F2 revY

2011-04-21  Damjan Marion <damjan.marion@gmail.com>

	* : buspirate: fix building on some OSes

2011-04-12  Alexandre Pereira da Silva <aletes.xgr@gmail.com>

	* : Fix non cfi x16 nor flash connected to x8 bus. The ids in the
	table should be masked before comparison.

2011-04-12  Alexandre Pereira da Silva <aletes.xgr@gmail.com>

	* : Make the LPC32xx slc nand driver the default

2011-04-14  Broadcom Corporation (Evan Hunter) <ehunter@broadcom.com>

	* : RTOS Thread awareness support wip - works on Cortex-M3 with ThreadX and FreeRTOS Compared to original patch a few nits were fixed: - remove stricmp usage - unsigned compare fix - printf formatting fixes - fixed a bug with overrunning a memory buffer allocated with
	malloc.

2011-04-13  Luca Ellero <lroluk@gmail.com>

	* : Replace byte-access to memory with faster word-access Freescale iMX53 doesn't seem to like unaligned accesses to his
	memory mapped registers.  Anyway this patch makes
	dump_image/load_image 4X faster for every access through APB.  Signed-off-by: Luca Ellero <lroluk@gmail.com>

2011-04-13  Luca Ellero <lroluk@gmail.com>

	* : Add preliminary support for Freescale iMX53 Signed-off-by: Luca Ellero <lroluk@gmail.com>

2011-04-12  Michel JAOUEN <michel.jaouen@stericsson.com>

	* : cortex_a :apb mem read/write working with mmu_on Conflicts: 	src/target/cortex_a.c

2011-04-12  Michel JAOUEN <michel.jaouen@stericsson.com>

	* : cortex_a : use dap ref from armv4_5common

2011-04-09  Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

	* : at91: add chip register definition and generic init support for  - pio  - pmc  - rstc  - wdt  - sdramc  - smc Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
	<plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
	Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

2011-04-09  Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

	* : add at91sam9261-ek support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
	<plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
	Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

2011-04-09  Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

	* : jlink: jlink_debug_buffer use inline function when
	_DEBUG_USB_COMMS_ not define Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
	<plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
	Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

2011-04-03  Ali Lown <ali@lown.me.uk>

	* : Add support for LED to USB Blaster code.

2011-04-05  Michel JAOUEN <michel.jaouen@stericsson.com>

	* : cortex_a : implement jtag console for cortex_a

2011-04-04  Drasko DRASKOVIC <drasko.draskovic@gmail.com>

	* : Corrected waiting on PrAcc in wait_for_pracc_rw(). Added
	necessary check that PrAcc is "1" before FASTDATA access.

2011-04-02  yvind Harboe <oyvind.harboe@zylin.com>

	* : pandaboard: use new -dbgbase option to workaround broken ROM
	table Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2011-04-01  Michel JAOUEN <michel.jaouen@stericsson.com>

	* : cortex_a: fix gaffe in first implementation of -dbgbase

2011-04-01  yvind Harboe <oyvind.harboe@zylin.com>

	* : mips: fix gaffe in previous commit accidentally invoked return jtag_execute_queue() in the middle of a
	fn. Hmm.... I would have expected gcc or at least lint to catch
	this.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2011-03-31  Phil <philip@evolution.com>

	* : Added s19 to (fast_)load_image documentation to match the online
	help.

2011-03-31  yvind Harboe <oyvind.harboe@zylin.com>

	* : types: write memory now uses const Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2011-03-31  yvind Harboe <oyvind.harboe@zylin.com>

	* : startup: fix bugs in cleanup upon errors during startup Importantly adapter cleanup will now happen upon startup failure.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2011-03-31  yvind Harboe <oyvind.harboe@zylin.com>

	* : mips: mips_ejtag_get_impcode error propagation added Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2011-03-31  yvind Harboe <oyvind.harboe@zylin.com>

	* : mips: fix error handling for jtag_execute_queue() Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2011-03-30  yvind Harboe <oyvind.harboe@zylin.com>

	* : cortex-a: use -dbgbase option Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2011-03-28  Olivier Schonken <olivier.schonken@gmail.com>

	* : at91sam3: Modified cidr comparisson to ignore version bits production processor versions increment, thus the version bits
	should be ignored for future proofing. e.g.  Engineering sample
	version == 0x00, production version 0x01

2011-03-29  Alexandre Pereira da Silva <aletes.xgr@gmail.com>

	* : Clarify LPC32XX address cycles message Hi, This is a more descriptive message about LPC32XX error, when the
	nand chip needs 5 address cycles.  Thanks.

2011-03-28  Andrew Lyon <andrew.lyon@gmail.com>

	* : bugfix for step <address> mips_m4k The patch below fixes step <address> on mips_m4k.  Spencer Oliver <spen@spen-soft.co.uk>: The current code is used on all other arch's - is there a underlying
	issue with those aswell ?

2011-03-22  yvind Harboe <oyvind.harboe@zylin.com>

	* : cortex_a: rename cortex_a8.c/h to cortex_a.c/h Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2011-03-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : cortex a9: merge cortex a9 and a8 code better to keep this in a single file.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2011-03-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: fix bug in ir scan handling set cur_instr to BYPASS as optimisation code will rely on checking
	the cached value.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2011-03-20  yvind Harboe <oyvind.harboe@zylin.com>

	* : dsp563xx_once: fix warning and potential bug I don't think dsp563xx_once_read_register() would ever be called
	with len==0, but it would have been broken in that case.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2011-03-03  Mathias K <kesmtp@freenet.de>

	* : target: allow targets to override memory alignment Targets can implement read/write_buffer to handle alignment.

2011-03-17  Uwe Hermann <uwe@hermann-uwe.de>

	* : Fix a bunch of typos.  Fix a bunch of typos.  Most are in code comments, so nothing should break. UNKOWN_COMMAND
	and CMD_UNKOWN are not used elsewhere, so correcting the spelling
	should also not break anything.

2011-03-15  yvind Harboe <oyvind.harboe@zylin.com>

	* : dsp563xx: fix bug in x buffer handling found by inspection.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2011-03-03  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: fix JTAG over TCP/IP performance problem only flush write queue just before waiting for more data, rather
	than when fetching more data from the buffer.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2011-03-03  yvind Harboe <oyvind.harboe@zylin.com>

	* : jtag: clean up jtag_sleep, handle short sleeps correctly via
	usleep short sleeps are handled via usleep, longer sleeps we round up to
	nearest ms.  There was a bug in jtag_sleep() in that it would round *down* to
	nearest ms, thus making all <1ms sleeps 0. Found by inspection
	rather than symptom.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2011-03-10  Aaron Carroll <aaronc@ok-labs.com>

	* : omap4430: add Blaze config Signed-off-by: Aaron Carroll <aaronc@ok-labs.com>

2011-03-07  Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

	* : jlink: add Emulator configuration support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
	<plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
	Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

2011-03-07  Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

	* : jlink: use tap buffer as 2k as said in the datasheet Section 3.3.2 Organization of buffers All buffers are big enough to hold 2 KByte of data.  this will double the speed of download Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
	<plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
	Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

2011-03-03  Mathias K <kesmtp@freenet.de>

	* : ft2232: fix log message and change log output to debug

2011-03-02  Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

	* : at91: add at91sam9g10 support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
	<plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
	Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

2011-03-02  Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

	* : at91: add at91sam9263 support Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
	<plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
	Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

2011-03-02  Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

	* : at91sam9: factorise cpu support all at91sam9 are nearly the same except sram and soc name Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
	<plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
	Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

2011-02-28  Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

	* : jlink: switch commands to subcommands Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
	<plagnioj@jcrosoft.com>

2011-02-28  Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

	* : jlink: add new PID and VID The default pid of the segger is 0x0101 But when you change the USB
	Address it will also pid = ( usb_address > 0x4) ? 0x0101 : (0x101 + usb_address) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
	<plagnioj@jcrosoft.com>

2011-02-24  yvind Harboe <oyvind.harboe@zylin.com>

	* : log: debug level is between silent and debug output levels It wasn't previously possible to silence the output.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2011-02-24  Mathias K <kesmtp@freenet.de>

	* : ft2232: fix possible read buffer overflow This patch fix a possible read buffer overflow in
	ft2232_execute_queue.  Also the correct read queue size for libftdi
	and libftd2xx was added and and tested.  In function ft2232_write a
	uninitialized value was initialized because we don't know if this
	value was set in the ftdi api call.

2011-02-21  Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

	* : add at91rm9200-ek board support tested with jlink sam-ice v5 while loading barebox (gdb) load Loading section .text, size 0x2f190 lma 0x21f00000
	Loading section .rodata, size 0x931c lma 0x21f2f190 Loading section
	.data, size 0x29e8 lma 0x21f384ac Loading section .barebox_cmd, size
	0x78c lma 0x21f3ae94 Loading section .barebox_initcalls, size 0x80
	lma 0x21f3b620 Start address 0x21f00000, load size 243360 Transfer
	rate: 26 KB/sec, 13520 bytes/write.  Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD
	<plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
	Cc: Patrice Vilchez <patrice.vilchez@atmel.com>

2011-02-20  Mathias K <kesmtp@freenet.de>

	* : dsp563xx: rudimentary gdb support This patch add rudimentary gdb support. The gdb register list order
	is corrected. All registers are now 32bit width. Events are send to
	signalize gdb the current target status. Resume and step function
	was corrected to consider a modified pc register. Read/write memory
	now support L memory type, this means a memory with alternating y/x
	memory words. The memspace variable, used by gdb, is now observed
	before a default memory access is initiated. Dummy functions for
	breakpoint and watchpoint are added.

2011-02-18  SimonQian <SimonQian@SimonQian.com>

	* : fix compile error under MinGW

2011-02-14  Luca Ellero <lroluk@gmail.com>

	* : arm_adi_v5: add/move apsel member in struct adiv5_dap This patch tries to make some order in "apsel" mess.  "dap apsel"
	command was quite useless (and broken) by itself.  With this patch
	we can use it to select between AHB or APB memory access (previous
	patch 05ab8bdb813acdcd74afa71d6656c2df816cb230 was somehow broken).  - moves member apsel (in struct adiv5_dap) to ap_current - adds apsel member this strange choice is made trying to keep coherence in "dap apsel"
	 command and to keep compatibility with other code (for example
	cortex_a8).  Signed-off-by: Luca Ellero <lroluk@gmail.com>

2011-02-17  Mathias K <kesmtp@freenet.de>

	* : dsp563xx_once: Correct wrong return value on jtag communication
	errors This patch change the return value on a jtag communication error to
	TARGET_UNKNOWN because this function should return the current
	target status and not a error code from the underlying api call.
	Also the validity of the jtag_status is extended to all static bits
	in this value.

2011-02-15  Bjarne Steinsbo <bsteinsbo@gmail.com>

	* : lpc32xx: Flash driver Based on the lpc3180 driver, but released as a separate driver for
	 two reasons: 1) I don't have an lpc3180 to test it against, so it might
	 unintentionally break compatibility.  2) It's using a different OOB layout than lpc3180.  Rewritten so that it no longer borrows code from the NXP CDL
	library.  Instead borrowing code from the u-boot port to lpc32xx,
	written by Kevin Wells.  Tested on lpc3250 (Hitex LPC3250-Stick).  OOB layout is compatible
	with LPCLinux.

2011-02-15  Mathias K <kesmtp@freenet.de>

	* : - add bulk memory write function - execute jtag queue at the end of
	the memory transfer

2011-02-13  Mathias K <kesmtp@freenet.de>

	* : ft2232: add functions for ft2232 set data bits high/low byte
	command reduce duplication. No change in behavior.

2011-02-12  Luca Ellero <lroluk@gmail.com>

	* : arm_adi_v5: add wrapping transfer functions with selection of ap Signed-off-by: Luca Ellero <lroluk@gmail.com>

2011-02-12  Luca Ellero <lroluk@gmail.com>

	* : cortex_a9: check if MMU is enabled on APB read/write memory Signed-off-by: Luca Ellero <lroluk@gmail.com>

2011-02-12  Luca Ellero <lroluk@gmail.com>

	* : cortex_a9: trivial fixes Signed-off-by: Luca Ellero <lroluk@gmail.com>

2011-02-09  Luca Ellero <lroluk@gmail.com>

	* : cortex_a9: implement read/write memory through APB-AP This patch adds read/write capability to memory addresses not
	accessible through AHB-AP (for example "boot ROM code").  To select AHB or APB, a "dap apsel" command must be issued: dap
	apsel 0 -> following memory accesses are through AHB dap apsel 1 ->
	following memory accesses are through APB NOTE: at the moment APB memory accesses are very slow, compared       to AHB accesses. Work has to be done to get it faster (for       example LDR/STR instead od LDRB/STRB) Signed-off-by: Luca Ellero <lroluk@gmail.com>

2011-02-08  Michal Demin <michaldemin@gmail.com>

	* : buspirate: Fix command parsing, fix errors to have more sense.  Signed-off-by: Michal Demin <michaldemin@gmail.com>

2011-02-07  Luca Ellero <lroluk@gmail.com>

	* : omap4430: Add JRC TAPID for PandaBoard REV EA1 (PEAP platforms) PandaBoard REV EA1 (Panda Early Adopter Program) has a different ID.
	This patch add alternate REV EA1 TAP id to configuration file Signed-off-by: Luca Ellero <lroluk@gmail.com>

2011-02-08  Luca Ellero <lroluk@gmail.com>

	* : cortex_a8/a9: fix some comments Signed-off-by: Luca Ellero <lroluk@gmail.com>

2011-01-31  yvind Harboe <oyvind.harboe@zylin.com>

	* : stm32x: add support for STM32F20x ready for wider testing and comments on basic erase + programming.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2011-02-02  Mathias K <kesmtp@freenet.de>

	* : 24bit buffer support Hello, this patch add 24bit support to the target buffer functions and
	little/big endian functions.  Regards, Mathias

2011-02-02  Aaron Carroll <aaronc@cse.unsw.edu.au>

	* : cortex_m3: allow scripts to override reset If a handler for the reset-assert event it present, skip the usual
	reset handling.  This is needed, for example, for board-level
	resets.  Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>

2011-01-31  yvind Harboe <oyvind.harboe@zylin.com>

	* : cfi: use ARM32 machine code on all CPUs but Cortex M3 ARM11 broke with aa61a3b3d8b6acad19050987835ec05f3d298bdb as the
	code only checked for arm 7/9.  CFI probably needs work for non-ARM targets but perhaps not adding
	working area memory to e.g. MIPS will give the default slow CFI
	support.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2011-01-24  Aaron Carroll <aaronc@cse.unsw.edu.au>

	* : cortex_a9: add source files for Cortex A9 support.  add target and build support for A9 Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>

2011-01-24  Aaron Carroll <aaronc@cse.unsw.edu.au>

	* : Add '-coreid' target option to support multiple cores per TAP.  ARM Cortex-A9 multi-core chips expose a single TAP/DAP which
	connects to both cores.  The '-coreid' option selects which core the
	target should connect to.  Note that at present, OpenOCD can connect to either core, but not
	both simulatenously, until ADI contexts can be shared.  Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>

2011-01-28  Aaron Carroll <aaronc@cse.unsw.edu.au>

	* : openocd.texi: minor fixes in Reset Configuration Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>

2011-01-26  Mathias K <kesmtp@freenet.de>

	* : - add xds100v2 configuaration file Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-01-26  Mathias K <kesmtp@freenet.de>

	* : add basic TI xds100v2 support Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-01-18  Eric Wetzel <thewetzel@gmail.com>

	* : stellaris: automatically generate and update device IDs Added a Perl script to contrib that uses the header files in
	StellarisWare complete Firmware Development Package provided by
	TI/Luminary to generate a new list of device IDs Used Perl script and revision 6734 of TI/Luminary StellarisWare to
	update device IDs

2011-01-13  Santeri Salko <santeri.salko@gmail.com>

	* : str9xpec: Find flash controller from the chain.  Find the flash controller by position since it is before the core,
	not after it.  This fixes the problem that str9xpec enable_turbo (or any other
	str9xpec command) did not work. (See my post in
	http://forum.sparkfun.com/viewtopic.php?f=18&t=25542) Signed-off-by: Santeri Salko <santeri.salko@gmail.com>

2011-01-13  simon qian <simonqian.openocd@gmail.com>

	* : transport: fix LOG_DEBUG gaffe LOG_DEBUG() arguments are only evaluated when DEBUG logging is
	enabled, do not use arguments that have side effects like foo++.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2011-01-05  Eric Wetzel <thewetzel@gmail.com>

	* : nit: more LOG_* \n fixes Remove extra \n from LOG_DEBUG, LOG_INFO, and LOG_WARNING messages Remove LOG_INFO_N LOG_INFO_N was only used once and had a \n at the
	end Change LOG_USER_N calls that end with \n to LOG_USER

2011-01-08  David Brownell <david-b@pacbell.net>

	* : present CM3 Trace agenda

2011-01-06  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : cfi: use safer arch detection Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-01-05  Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>

	* : Add the support for the armv7m arch.  Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>

2011-01-05  Eric Wetzel <thewetzel@gmail.com>

	* : nit: do not add \n at end of LOG_ERROR Fixed in many other places, and submitted in response to Øyvind's
	invitation.

2010-12-24  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : target: change working area free data type We only use the struct working_area member 'free' as a true/false
	type so might as well use a bool data type.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2011-01-03  yvind Harboe <oyvind.harboe@zylin.com>

	* : error handling: the error number is not part of the user
	interface Do not propagate error number to user. This is for internal
	programming purposes only. Error messages to the user is reported as
	text via LOG_ERROR().  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2011-01-02  Michael Schwingen <michael@schwingen.org>

	* : cfi_protect is not implemented on Spansion flashes (many do not
	even have protection bits). Demote from error to warning, so that
	common board code can use "flash write_image erase unlock"
	regardless of the flash type.  Signed-off-by: Michael Schwingen <michael@schwingen.org>

2011-01-02  Jon Povey <jon.povey@racelogic.co.uk>

	* : svf: implement sleep for RUNTEST min_time Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> min_time was effectively ignored, I needed it to program a Lattice
	MachXO which uses a RUNTEST to wait for an erase operation, amongst
	other things.  With this patch pauses happen and I can program the device with an
	SVF generated in LSC ispVM (with "Rev D Standard" checked to
	suppress nonstandard LOOP statements)

2010-12-31  Antonio Borneo <borneo.antonio@gmail.com>

	* : NAND/S3CXXXX: remove private "target" copy Remove "target" form private data, and use common one in struct
	nand_block.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-12-31  Antonio Borneo <borneo.antonio@gmail.com>

	* : NAND/NUC910: remove private "target" copy Remove "target" form private data, and use common one in struct
	nand_block.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-12-31  Antonio Borneo <borneo.antonio@gmail.com>

	* : NAND/MX2: remove private "target" copy Remove "target" form private data, and use common one in struct
	nand_block.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-12-31  Antonio Borneo <borneo.antonio@gmail.com>

	* : NAND/DAVINCI: remove private "target" copy Remove "target" form private data, and use common one in struct
	nand_block.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-12-31  Antonio Borneo <borneo.antonio@gmail.com>

	* : NAND/TCL: prepare for common "target" reference Every NAND driver keeps private copy of "target" structure.  Prepare
	infostructure to move private "target" copy in common/shared struct
	nand_device.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-12-31  Antonio Borneo <borneo.antonio@gmail.com>

	* : NAND/CORE: Comment use of alive_sleep() Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-12-31  Antonio Borneo <borneo.antonio@gmail.com>

	* : flash/nand: review NAND driver interface From struct nand_flash_controller : - remove unused field register_commands; - remove field controller_ready, exported but   never referenced.  Remove dead code pointed by controller_ready.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-12-29  Andrew MacIsaac <macisaac.andrew@gmail.com>

	* : Compilation Warnings on OS X 10.5 I received a number of "-Wshadow" related warnings (treated as
	errors) while trying to build on OS X Leopard.  In addition, there
	were two miscellaneous other warnings in the flash drivers.
	Attached are two patches which correct these issues and the commit
	messages to accompany them.  My system has the following configuration (taken from uname -a): Darwin 9.8.0 Darwin Kernel Version 9.8.0: Wed Jul 15 16:55:01 PDT
	2009; root:xnu-1228.15.4~1/RELEASE_I386 i386 === Werror_patch.txt Commit Message === compilation: fixes for
	-Wshadow warnings on OS X These changes fix -Wshadow compilation warnings on OS X 10.5.8 Compiled with the following configure command: ../configure --prefix=/usr/local --enable-maintainer-mode
	--enable-jlink --enable-ft2232_libftdi === flash_patch.txt Commit Message === compilation: fixes for flash
	driver warnings on OS X These changes fix two compilation warnings on OS X 10.5.8: ../../../../src/flash/nor/at91sam3.c:2767: warning: redundant
	redeclaration of 'at91sam3_flash'
	../../../../src/flash/nor/at91sam3.c:101: warning: previous
	declaration of 'at91sam3_flash' was here and ../../../../src/flash/nor/stmsmi.c:205: warning: format not a string
	literal and no format arguments Compiled with the following configure command: ../configure --prefix=/usr/local --enable-maintainer-mode
	--enable-jlink --enable-ft2232_libftdi === Andrew

2010-12-29  yvind Harboe <oyvind.harboe@zylin.com>

	* : warnings: use more 'const' for char * Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-12-24  David Brownell <dbrownell@users.sourceforge.net>

	* : initial SWD transport (SWD infrastructure #2) This piggy backs on JTAG so it's not yet pretty, but that seems
	unavoidable so far given today's OpenOCD internals.  SWD init and data transfer  are unfinished and untested, but that
	should cause no regressions, and will be addressed by the time
	drivers start using this infrastructure.  Checking in whould get the
	code working better sooner, and turn up any structural/architectural
	issues while they're easier to fix.  The debug adapter drivers will provide simple SWD driver structs
	with methods that kick in as needed (instead of JTAG).  So far just
	one adapter driver has been updated (not yet ready to use or
	circulate).  The biggest issues are probably   - fault handling, where the ARM Debug Interface V5 pipelining     needs work in both JTAG and SWD modes and   - missing  rewrite of block I/O code to work on both of our
	Cortex-ready transports (Current code is  hard-wired to JTAG);
	relates also to the pipelining issue.    - omitted support to activate/deactivate SWO/SWV trace (this is     technically trivial, but configuring what to trace is NOT.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> ----  doc/openocd.texi        |   17 ++  src/jtag/core.c         |    3  src/jtag/interface.h    |    4  src/jtag/jtag.h         |    2  src/jtag/swd.h          |  114 +++++++++++++++++++  src/jtag/tcl.c          |    2  src/target/adi_v5_swd.c |  281
	 ++++++++++++++++++++++++++++++++++++++++++++++--
	src/target/arm_adi_v5.c |    8 +  src/target/arm_adi_v5.h |    3  9 files changed, 425 insertions(+), 9 deletions(-)

2010-12-23  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : flash: print flash bank name on flash info cmd The flash bank name is a required element in adding flash banks,
	however other than looking at the config file there is no way of
	getting the name used in openocd.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-12-23  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : stm32: update option bytes for stm32xl family add supoort for xl family boot bank option.  The option byte
	handling will be cleaned up in a later patch.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-12-22  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : stm32: add dual flash bank support This patch adds the initial dual flash bank support for devices such
	as the stm32xl family.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-12-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : lpc2148: redo to the new target configuration scheme Define a proc which PCBs can easily override.  Also demonstrates how to add multiple TAP exepcted-id's using
	arguments.  Added 0x3f0f0f0f as expected TAP-id. Old LPC2148 silicon I happened
	to have on my desk? Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-12-22  yvind Harboe <oyvind.harboe@zylin.com>

	* : bootstrap: by default the submodules are initialized use "nosubmodule" to skip setting up submodules.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-12-19  Tormod Volden <debian.tormod@gmail.com>

	* : tcl/interface/flashlink.cfg: Fix broken ST URL

2010-12-19  Tormod Volden <debian.tormod@gmail.com>

	* : tcl/board: Fix ST URLs in stm32* eval board configuration files ST recently rewamped (screwed up) their web site and broke all
	links.  Also match the chip names with those on the web site product
	descriptions.

2010-12-16  Michael Trensch <MTrensch@googlemail.com>

	* : Add support for Hilscher netX controllers

2010-12-19  Antonio Borneo <borneo.antonio@gmail.com>

	* : TCL: fix non TCL comments End of line comments fixed with ';' before '#'.  Added few
	additional 'space' to keep indentation in multi-line comments.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-12-14  John Devereux <john@devereux.me.uk>

	* : Fix for compilation failure amt_jtagaccel.c Hi, I think there are errors in amt_jtagaccel.c I attach a small patch that I needed to make it compile.

2010-12-14  yvind Harboe <oyvind.harboe@zylin.com>

	* : stm32: fix unprotect the unprotect fn in stm32 needs to unprotect more sectors than was
	requested aligned to some boundary.  Print warning when this happens.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-12-10  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : contrib: add source to the cfi flash loaders Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-12-08  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : stm32: add STM32E-EVAL external memory config script Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-12-08  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : cfi: allow optional buffer write support Some flash's do not support buffer writes, so we now check they are
	supported before trying to use them.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-12-08  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : cfi: prefix string hex output Add hex prefix so we know output is not decimal.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-12-08  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : cfi: whitespace and long line cleanup Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-12-04  Freddie Chopin <freddie_chopin@op.pl>

	* : remove srst_pulls_trst from LPC2xxx target scripts LPC2xxx do not require reset_config srst_pulls_trst. This can cause
	various "strange" problems when flashing the chip, because "reset
	halt" actually allows the chip to run for some short period of time
	and execute some code.  Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>

2010-12-06  yvind Harboe <oyvind.harboe@zylin.com>

	* : jtag: getting the JTAG speed can fail If the JTAG speed has not been set, then it has no defined value,
	add code to propagate the error.  No change to actual behavior as no new failure paths have been
	introduced. This is a no-op patch to make subsequent patches
	smaller.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-12-03  Rolf Meeser <rolfm_9dq@yahoo.de>

	* : lpc2478 target config: CCLK as (mandatory) parameter

2010-12-03  Rolf Meeser <rolfm_9dq@yahoo.de>

	* : Add board config for Embedded Artists LPC2478-32

2010-12-03  Rolf Meeser <rolfm_9dq@yahoo.de>

	* : Fix sector layout for 504-KiB LPC2000 devices

2010-12-02  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : luminary: remove unused config cmds.  Due to commit e40aee2954d2beabe1d8c530d9ff1e564fb01f48 we now honour
	the targets 'reset_config' setting. Previously we ignored the srst
	setting for luminary targets.  Luminary targets have never supported using srst to reset into debug
	mode so remove the option from the target configs files.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-12-02  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : config: fix luminary jtag config When this config was updated in commit
	e3773e3e3d1f1ee0dbb0b69e8babe8419784d1c1 the old jtag declaration
	was not removed.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-12-01  yvind Harboe <oyvind.harboe@zylin.com>

	* : profile: use 100Hz as a default sampling frequency it's a lie that is somewhere in the vicinity of the truth. Certainly
	64MHz confuses gprof and produces zero output and no error messages.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-12-01  Rolf Meeser <rolfm_9dq@yahoo.de>

	* : lpc2900.c: Add support for new device LPC2926

2010-11-29  Piotr Esden-Tempski <piotr@esden.net>

	* : Some cosmetic fixes to the Lisa/L layout support functions.

2010-11-29  Piotr Esden-Tempski <piotr@esden.net>

	* : Updated Floss-JTAG config file to support v0.3 and newer. Also
	added noeeprom version of the config file for older versions of
	Floss-JTAG.

2010-11-26  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : build: correct configure help message As we default to building jimtcl the help text should show that.  No
	change in functionality or configure args required.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-11-22  Antonio Borneo <borneo.antonio@gmail.com>

	* : FLASH/NOR: rename from spearsmi to stmsmi STMicroelectronics controller SMI is not SPEAr specific.  Rename it
	and change name to every symbol in the code.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-11-18  Antonio Borneo <borneo.antonio@gmail.com>

	* : NOR/SPEARSMI: fix segfault If flash chip is not listed in the table, or if no flash is
	connected, pointer must be properly initialized.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-11-22  yvind Harboe <oyvind.harboe@zylin.com>

	* : flash: iterating over an address range now handles multiple
	banks e.g. flash erase_address now works across an address range that
	spans multiple flash chips.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-11-19  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : build: remove AC_CONFIG_AUX_DIR macro This was used during testing and should have been removed.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-11-19  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : build: fix subconfigure parameter issue When passing CFLAGS for example through to the jimtcl subconfigure
	the quotes were not being preserved.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-11-19  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : build: prepend --with-jim-ext=nvp to jimtcl configure This allows us to add options to jimtcl configure.  The default
	autoconf AC_CONFIG_SUBDIRS does not currently support this.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-11-12  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : build: add common.mk Rather than specifying common makefile variables move them all to a
	common.mk.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-11-17  Antonio Borneo <borneo.antonio@gmail.com>

	* : FLASH/NOR: Remove useless file str9xpec.h Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-11-17  Antonio Borneo <borneo.antonio@gmail.com>

	* : FLASH/NOR: Remove useless file str7x.h Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-11-17  Antonio Borneo <borneo.antonio@gmail.com>

	* : FLASH/NOR: Remove useless file stellaris.h Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-11-17  Antonio Borneo <borneo.antonio@gmail.com>

	* : FLASH/NOR: Remove useless file lpc288x.h Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-11-17  Antonio Borneo <borneo.antonio@gmail.com>

	* : FLASH/NOR: Remove useless file avrf.h Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-11-17  Antonio Borneo <borneo.antonio@gmail.com>

	* : FLASH/NOR: Remove useless file at91sam7.h Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-11-17  Antonio Borneo <borneo.antonio@gmail.com>

	* : FLASH/NOR: Remove useless file spearsmi.h Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-11-11  Antonio Borneo <borneo.antonio@gmail.com>

	* : TCL/SPEAr: Added Serial flash in board file Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-11-11  yvind Harboe <oyvind.harboe@zylin.com>

	* : httpd: retire this server this never panned out and there are enough mistakes in the code that
	probably nobody used this.  Use the tcl server and implement a standalone http app instead works
	fine.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-11-13  yvind Harboe <oyvind.harboe@zylin.com>

	* : gdb: fix occasional crash when flash probe failed Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-11-09  yvind Harboe <oyvind.harboe@zylin.com>

	* : cortex_m3: report detected error condition in poll If the CPU crashed at some point, poll will discover this.  Previously the poll fn would clear the error and print a warning,
	rather than propagating the error.  The new behavior is to report the error back up, but still clear the
	error.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-11-08  Antonio Borneo <borneo.antonio@gmail.com>

	* : TCL scripts: replace "puts" with "echo" Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-11-08  Antonio Borneo <borneo.antonio@gmail.com>

	* : JIM: Add "-n" option to "echo" With the new JIMTCL, "puts" only writes to stdout.  To write on
	telnet port too, "echo" must be used.  This patch gives to "echo"
	similar commandline option of "puts".  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-11-08  yvind Harboe <oyvind.harboe@zylin.com>

	* : stm32: return error when failing to read add missing error handling.  Output warning when assuming maximum flash size in the family when
	failing to read.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-11-08  yvind Harboe <oyvind.harboe@zylin.com>

	* : stm32: sharpen error handling for timeouts delete lots of crud by handling this all in one spot.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-11-04  Antonio Borneo <borneo.antonio@gmail.com>

	* : TCL scripts: add support for ST SPEAr310 Initial support for ST SPEAr310 and for the evaluation board
	EVALSPEAr310 Rev. 2.0.  Scripts are split in generic for SPEAr3xx
	family and specific for SPEAr310. This should easily allow adding
	new members of the family.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-10-29  Marek Vasut <marek.vasut@gmail.com>

	* : CortexA8: Introduce Freescale i.MX51 variant This patch introduces support for Cortex A8 based Freescale i.MX51
	CPU. This CPU has the Debug Access Port located at a different
	address (0x60008000) than TI OMAP3 series of CPUs.  i.MX51 configuration file based on OMAP3 configuration file and an
	email from Alan Carvalho de Assis <acassis@gmail.com>.  Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

2010-10-31  Marek Vasut <marek.vasut@gmail.com>

	* : ADIv5: Implement function to lookup CoreSight component This patch implements "dap_lookup_cs_component()", which allows to
	lookup CS component by it's identification.  Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

2010-11-04  ddraskovic <ddraskovic@sequans.com>

	* : arm964e: Add support for ARM946E target.  So far most of the people have been using existing ARM966E in the
	place of ARM946E, because they have practically the same scan
	chains.  However, ARM946E has caches, which further complicates JATG handling
	via scan-chain. this was preventing single-stepping for ARM946E when
	SW breakpoints are used.  This patch thus introduces : 1) Correct cache handling on memory write 2) Possibility to flush whole cache and turn it off during debug, or
	just to flush affected lines (faster and better) 3) Correct SW breakpoint handling and correct single-stepping 4) Corrects the bug on CP15 read and write, so CP15 values are now
	correctly R/W

2010-10-15  yvind Harboe <oyvind.harboe@zylin.com>

	* : jimtcl: 0.63 release as a git module.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-10-28  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : src: add loader src description  - add comment where to find the various loaders src files.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-10-28  yvind Harboe <oyvind.harboe@zylin.com>

	* : imx31pdk: use rclk w/1MHz fallback measure_clk indicates ca. 3-4MHz, so 1MHz should be safe.  Added self_test proc used to test that rclk worked.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-10-24  Peter Stuge <peter@stuge.se>

	* : Make systesetreq typos read sysresetreq instead Signed-off-by: Peter Stuge <peter@stuge.se>

2010-10-22  Michal Demin <michaldemin@gmail.com>

	* : buspirate: change handling of communication speed setting +
	create serial port open function Signed-off-by: Michal Demin <michaldemin@gmail.com>

2010-10-12  Antonio Borneo <borneo.antonio@gmail.com>

	* : TARGET: review handle_load_image_command() Collect variable definitions.  Report syntax error to command
	dispatcher.  Propagate error when unable to open file.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-10-10  David Brownell <dbrownell@users.sourceforge.net>

	* : swj-dp.tcl (SWD infrastructure #1) Provide new helper proc that can set up either an SWD or JTAG DAP
	based on the transport which is in use -- mostly for SWJ-DP.   Also update some SWJ-DP based chips/targets to use it.  The goal is
	making SWD-vs-JTAG transparent in most places.  SWJ-DP based chips
	really need this flexible configuration to cope with debug adapters
	that support different transports, without needing new target
	configs for each transport or adapter.  For JTAG-DP, callers will use "jtag newtap" directly, as today; only
	one chip-level transport option exists.  For SW-DP (e.g. LPC1[13]xx or EFM32, they'll use "swd newdap"
	directly (part of an upcoming SWD transport patch).  Again, only one
	transport option exists, so hard-wiring is appropriate there.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-10-05  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : build: remove warn_unused_result errors Remove any build errors for strtol when building release version of
	openocd.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-10-04  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : gdbserver: fix gdb_port memory leak Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-09-05  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: add : port number syntax for tftp filing system Allows using non-standard port number. Default to port 69.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-09-27  yvind Harboe <oyvind.harboe@zylin.com>

	* : server: add support for pipes -p/--pipe is now deprecated. Use '-c "gdb_port pipe;log_output
	openocd.log"' instead. Warning logged.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-09-27  yvind Harboe <oyvind.harboe@zylin.com>

	* : server: read/write now goes through connection fn's depending on whether the connection is over a socket or pipe, the
	read is done differently.  pipes can return -1 when writing 0 bytes, make 0 byte writes a
	successful no-op. 0 byte writes falls out naturally of tcl server
	code.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-09-26  yvind Harboe <oyvind.harboe@zylin.com>

	* : server: rely on ctrl-c to stop openocd there was special support to support pressing 'x' to quit openocd.
	ctrl-c is sufficient. The main server loop is already complicated
	enough.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-09-27  Luca Bruno <lucab@debian.org>

	* : Update ep93xx and at91rm9200 drivers ep93xx and at91rm9200 are conditionally built only on arm and were
	not updated to reflect changes in command registration handler.
	This patch makes them properly compile again, fixing a build failure
	experienced on Debian armel.  Signed-off-by: Luca Bruno <lucab@debian.org> Signed-off-by: Zachary
	T Welch <zwelch@codesourcery.com>

2010-09-28  yvind Harboe <oyvind.harboe@zylin.com>

	* : fileio: refactor struct fileio to be an opaque structure Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-09-27  yvind Harboe <oyvind.harboe@zylin.com>

	* : flash: fix error handling memory leaks and missing check on memory allocation.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-09-24  Zachary T Welch <zwelch@codesourcery.com>

	* : Fix omap3_dbginit to write to physical memory.  Setting the OMAP3530 DBGEN bit must be done in physical memory, so
	update omap3_dbginit callback to use the new 'mww phys' command
	syntax.

2010-09-26  yvind Harboe <oyvind.harboe@zylin.com>

	* : gdb: fix blank line at top snuck in at some point...  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-09-20  yvind Harboe <oyvind.harboe@zylin.com>

	* : flash: fix error handling sensible error must be reported at failure site Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-09-21  Antonio Borneo <borneo.antonio@gmail.com>

	* : TCL scripts: collect duplicated procedures TCL procedures mrw and mmw, originally in DaVinci target code, are
	duplicated in other TCL scripts.  Moved in a common helper file, and
	added help/usage description.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-09-20  yvind Harboe <oyvind.harboe@zylin.com>

	* : helper: fix flaky capture command capture of progress output would get polling results. This will
	break in the example below where polling output would override the
	tcl return value.  capture {sleep 10000; set abc def} Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-09-18  yvind Harboe <oyvind.harboe@zylin.com>

	* : logging: turn of stdout/stderr buffering with this buffering disabled fancier logging scripts will be able to
	process each line as it is output.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-09-20  yvind Harboe <oyvind.harboe@zylin.com>

	* : jtag: build jtag first because it generates header files Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-09-07  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: split out configure option for eCos and JTAG master Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-09-20  yvind Harboe <oyvind.harboe@zylin.com>

	* : tcl: remove incomplete unused tcl file Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-09-19  Mike Dunn <mikedunn@newsguy.com>

	* : xscale: check that wp length does not exceed address Hi everyone, A while back I sent in a patch that adds support for watchpoint
	lengths greater than four on xscale.  It's been working well, until
	the other day, when it caused an unexpected debug exception.
	Looking into this I realized there is a case where it breaks: when
	the length arg is greater than the base address.  This is a
	consequence of the way the hardware works.  Don't see a work-around,
	so I added code to xscale_add_watchpoint() to check for and disallow
	this combination.  Some more detail... xscale watchpoint hardware does not support a
	length directly.  Instead, a mask value can be specified (not to be
	confused with the optional mask arg to the wp command, which xscale
	does not support).  Any bits set in the mask are ignored when the
	watchpoint hardware compares the access address to the watchpoint
	address.  So as long as the length is a power of two, setting the
	mask to length-1 effectively specifies the length.  Or so I thought,
	until I realized that if the length exceeds the base address, *all*
	bits of the base address are ignored by the comaparator, and the
	watchpoint range effectively becomes 0 .. length.  Questions, comments, criticisms gratefully received.  Thanks, Mike Signed-off-by: Mike Dunn <mikedunn@newsguy.com>

2010-09-18  Karl Kurbjun <kkurbjun@gmail.com>

	* : AM/DM37x: Unify configuration scripts and add support for TI
	Beagleboard xM.

2010-09-13  yvind Harboe <oyvind.harboe@zylin.com>

	* : breakpoints: fix error handling do not try to interpret "retval" into a string, just amend a bit
	about the context of the already reported error.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-09-13  Mike Dunn <mikedunn@newsguy.com>

	* : xscale: fix sw breakpoints for thumb; set bp immediately Hi everyone, Version 2 of this patch.  Code added to breakpoints.c was removed
	from previous patch, and item 3 added, per discussion with Øyvind
	regarding error reporting.  Item 4 added, which I just noticed.  I tried to use a software breakpoint in thumb code on the xscale for
	the first time recently, and was surprised to find that it didn't
	work.  The result was this patch, which does four things: 1): fix trivial cut-n-paste error that caused thumb breakpoints to
	not work 2): call xscale_set_breakpoint() from
	xscale_add_breakpoint() 3): log error on data abort in
	xscale_write_memory() 4): fixed incorrect error code returned by
	    xscale_set_breakpoint() when no breakpoint register is available;
	added comment Item 2 not only makes the xscale breakpoint code consistent with
	other targets, but also alerts the user immediately if an error
	occurs when writing the breakpoint instruction to target memory
	(previously, xscale_set_breakpoint() was not called until execution
	resumed).  Also, calling xscale_breakpoint_set() as part of the call
	chain starting with handle_bp_command() and propagating the return
	status back up the chain avoids the situation where OpenOCD "thinks"
	the breakpoint is set when in reality an error ocurred.  Item 3 provides a helpful message for a common reason for failure to
	set sw breakpoint.  This was thoroughly tested, mindful of the fact that breakpoint
	management is somewhat dicey during single-stepping.  Comments and criticisms of course gratefully received.  Mike Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com>

2010-09-12  yvind Harboe <oyvind.harboe@zylin.com>

	* : helper: add stacktrace command that returns error stacktrace Ability to access the stacktrace from a script is quite handy.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-09-10  yvind Harboe <oyvind.harboe@zylin.com>

	* : version command: make it scriptable you can now set a variable in a script like set version [version].  Also version takes an optional argument "git" to show git version of
	source. If git is not installed during the build, then this will
	yield an error that is ignored during the build and "version git"
	returns an empty string.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-09-10  yvind Harboe <oyvind.harboe@zylin.com>

	* : cfi: random crash in cfi_probe() fixed for non_cfi cfi chips free() was invoked on rodata.  The mystery is why this bug has survived for so long.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-09-08  Mike Dunn <mikedunn@newsguy.com>

	* : xscale: mark xscale registers invalid on debug entry Hi everyone, This simple patch fixes a problem I noticed on the xscale where
	incorrect values are sometimes reported by the reg command.  The
	problem can occur when requesting the value of registers in the
	xscale-specific register cache.  With a couple of exceptions, none
	of the registers in the xscale register cache are automatically
	retrieved on debug entry.  This is probably fine, as they are
	unlikely to be needed on a regular basis during a typical debug
	session, and they can be retrieved when explicitly requested by name
	using the reg command.  The problem is that once this is done, the
	register remains marked as valid for the remainder of the OpenOCD
	session, and the reg command will henceforth always report the same
	value because it is obtained from the cache and is never again
	retrieved from the debug handler on the target.  The fix is to mark all registers in the xscale register cache as
	invalid on debug entry (before the two exceptions are retrieved),
	thus forcing retrieval (when requested) from the target across
	resumptions in execution, and avoiding the reporting of stale
	values.  Small addition change by Øyvind: change 'i' to unsigned to fix
	compiler warning for xscale_debug_entry() fn.  Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com>

2010-09-07  yvind Harboe <oyvind.harboe@zylin.com>

	* : warning: fix silly -O3 warning Some versions of GCC don't pick up that local variables are set in
	all code paths.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-08-31  Wookey <wookey@wookware.org>

	* : Numonyx M29W160ET patch Someone called David Carne popped up on IRC and offered a fix (as
	he's not on this list so can;t post here). I am just passing it on.
	(thanx David)  10:54 < davidc__> Basically; the Numonyx M29W160ET has an incorrect
	             CFI PRI block; it describes the erase blocks backwards  10:54 < davidc__> the linked patch has a fixup for that part
	 [really trivial]:

2010-08-24  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : flash: increase stellaris flash loader buffer This speeds up programming for targets with more working area, Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-08-27  David Brownell <dbrownell@users.sourceforge.net>

	* : bitq: unshadow pause() bitq.c: In function ‘bitq_scan_field’: bitq.c:224: error:
	declaration of ‘pause’ shadows a global declaration
	/usr/include/unistd.h:429: error: shadowed declaration is here Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-08-17  yvind Harboe <oyvind.harboe@zylin.com>

	* : mcb1700: Keil MCB1700 w/1768 config script Ca. 93kBytes/s flashing speed @ 10MHz JTAG clock Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-08-16  David Brownell <dbrownell@users.sourceforge.net>

	* : two NEWS updates Mention AVR32 AP7000 support.  Clarify ARM semihosting update was
	for V7M (not ARM9 etc).  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-08-15  Oleksandr Tymoshenko <gonzo@bluezbox.com>

	* : avr32: basic target script

2010-08-15  Oleksandr Tymoshenko <gonzo@bluezbox.com>

	* : avr32: work-in-progress committed so as to ease cooperation and to let it be improved over
	time.  So far it supports: - halt/resume - registers inspection - memory inspection/modification I'm still getting up to speed with OpenOCD internals and AVR32 so
	code is a little bit messy and I'd appreciate any feedback.

2010-08-13  Catalin Patulea <cat@vv.carleton.ca>

	* : Fix typo in documentation of usb_blaster_vid_pid command

2010-08-03  Piotr Esden-Tempski <piotr@esden.net>

	* : Added support for the Lisa/L jtag LEDs.

2010-08-03  Piotr Esden-Tempski <piotr@esden.net>

	* : Added support for Lisa/L builtin JTAG interface.

2010-08-10  Thomas Koeller <thomas.koeller@baslerweb.com>

	* : jtag: fix handling of 'tap enable' error if a tap could not be _enabled_, the error message was 'failed to
	disable tap'. Fixed that. Also, display the failing tap's name.  Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>

2010-08-10  Thomas Koeller <thomas.koeller@baslerweb.com>

	* : DM36x: Disable unused SYSCLKs Clear the enable bits for all clocks that are not set explicitly.
	This is done to increase robustness by removing pre-existing state.  Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>

2010-08-12  Fredrik Hederstierna <fredrik.hederstierna@securitas-direct.com>

	* : str9x: faster flash erase of entire chip The patch improves flash erase for STR9x in case of a full bank
	erase.  Then the chip erase command is used instead which improves
	speed significantly.  Also I think it might help if e.g. STR912 enters some state where
	flash banks are locked, and a chip erase command is the key for
	unlocking the flash.

2010-08-11  yvind Harboe <oyvind.harboe@zylin.com>

	* : board: added at91cap7a stk w/sdram config scripts The strange thing here with this board is that 16MHz kinda works,
	but only 2MHz is really stable.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-08-11  yvind Harboe <oyvind.harboe@zylin.com>

	* : arm: add missing error reporting when an unknown core mode is read from the target, report error. Can
	be communication failure.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-08-09  Ben Gardiner <bengardiner@nanometrics.ca>

	* : cfg: add omapl138 support and da850evm preliminary support This patch adds support for the omapl138 target and preliminary
	support for the da850evm. The target cfg file is based on the
	icepick routing done by the target/ti_dm6446.cfg file.  I have performed limited testing with this setup. I am posting this
	patch in the interest of sharing cfg files and in the hopes that the
	experts on this list can correct errors I have made or point out
	enhancements.  The testing I have performed is debugging uboot with gdb where I
	also use the following local.cfg and gdbinit files. Debugging
	appears to work in so much as 'ni' works.  local.cfg: gdb_memory_map disable gdbinit: target remote localhost:3333 set remote
	hardware-breakpoint-limit 2 set remote hardware-watchpoint-limit 2
	monitor poll on Comments welcome.  Best Regards, Ben Gardiner

2010-08-08  yvind Harboe <oyvind.harboe@zylin.com>

	* : target: if polling fails, back off back-off algorithm for polling. Double polling interval up to 5000ms
	when it fails.  when polling succeeds, reset backoff.  This avoids flooding logs(as much) when working with conditions
	where the target polling will fail.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-08-02  Mike Dunn <mikedunn@newsguy.com>

	* : xscale documentation: vector table handling Hi everyone.  I noticed some incorrect information in the user
	manual regarding how the vector table is handled on the xscale, so
	for your consideration, here's a short patch that corrects it, and
	adds a little more detail I thought might be helpful.  The documentation states that OpenOCD does not attempt to
	synchronize the vector tables in memory with those stored in the
	"mini instruction cache".  In fact, on each resume it does copy from
	memory to the cache all entries in the high and low tables that were
	not previously defined using the 'xscale vector_table' command. (In
	src/target/xscale.c, see xscale_update_vectors(), which is invoked
	by xscale_resume().)  I take advantage of this during Linux boot-up.
	The extra detail describes in general terms how I do this.  Corrections, comments are of course gratefully received.  Thanks, Mike Signed-off-by: Mike Dunn <mikedunn@newsguy.com>

2010-08-02  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: use correct base clock when calculating speed divisor revc uses 60MHz and revb 64MHz, use this in calculations.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-08-02  yvind Harboe <oyvind.harboe@zylin.com>

	* : lpc1768: even if rclk "works", it isn't necessarily the correct
	clk rclk = 4MHz oon lpc1768, the correct JTAG clk is 666MHz(4MHz/6).  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-08-02  yvind Harboe <oyvind.harboe@zylin.com>

	* : jtag: measure_clk debug proc It can be useful to get an approximate measurement of rtck frequency
	for debugging purposes.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-08-01  yvind Harboe <oyvind.harboe@zylin.com>

	* : util: ms command to calculate length of operations This can be used to calculate approximate RTCK frequency for
	instance.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-08-01  Peter Stuge <peter@stuge.se>

	* : Remove srst_pulls_trst from LPC2148 target srst_pulls_trst is only true on some (broken) LPC2148 boards, a fact
	which is already documented in doc/openocd.texi, so it shouldn't be
	set unconditionally in the target tcl.  This patch was needed to reflash when an Abort exception occured
	very early after reset, before OpenOCD tried to halt the CPU.

2010-07-30  yvind Harboe <oyvind.harboe@zylin.com>

	* : lpc7168: make flash available upon reset init set user mode to avoid ROM being mapped at address 0 rather than
	flash.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-07-10  Michal Demin <michal.demin@gmail.com>

	* : Buspirate: fix shadow

2010-07-19  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : flash: remove algorithm exit_point address for supported targets For the above targets the exit_point is optional when used with
	run_algorithm, so remove it.  This makes updating the algorithm less error prone.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-07-19  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : armv7m: exit_point optional for armv7m_run_algorithm As the armv7m uses instruction breakpoints for algorithms we do not
	really need to check the pc on exit.  This now matches the behaviour of the arm4_5 codebase.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-07-20  yvind Harboe <oyvind.harboe@zylin.com>

	* : arm11 error propagation fixes Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-07-19  yvind Harboe <oyvind.harboe@zylin.com>

	* : arm_dpm: error propagation fixes found by inspection Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-07-19  yvind Harboe <oyvind.harboe@zylin.com>

	* : arm: error propagation of arm_jtag_set_instr Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-07-19  yvind Harboe <oyvind.harboe@zylin.com>

	* : arm_adi_v5: mem_ap_write error propagation Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-07-19  yvind Harboe <oyvind.harboe@zylin.com>

	* : mem_ap_read_u32 error propagation Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-07-19  yvind Harboe <oyvind.harboe@zylin.com>

	* : debug: debug entry error propagation Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-07-19  yvind Harboe <oyvind.harboe@zylin.com>

	* : arm: add error propagation for enable/disable mmu caches Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-07-19  David Brownell <dbrownell@users.sourceforge.net>

	* : more careful luminary init Set up more of the Luminary-specific signals, and stop cloning a few
	of the JTAG defaults.  More comments too.  Still leaves the "dap info 0" bugs unresolved (presumably coupled to
	this particular adapter family) where TPIU, ITM, DWT, and other
	debug modules wrongly display as extra NVICs.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-07-19  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : flash: add nuc910 nand driver This adds a nand driver support for the nuc910 target.  Note that
	ECC is not currently supported by this driver, although it is
	supported by the peripheral.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-07-16  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : cfg: update rsc-w910 script  - Only enable the FMI (NAND) and DMA clocks.   - Select NAND interface on the MFSEL.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-07-18  yvind Harboe <oyvind.harboe@zylin.com>

	* : cortex a8: lots of error propagation fixes found by code inspection Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-07-18  yvind Harboe <oyvind.harboe@zylin.com>

	* : cortex a8: add missing error handling for
	cortex_a8_dap_write/read_coreregister_u32() Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-07-18  yvind Harboe <oyvind.harboe@zylin.com>

	* : cortex a8: add missing error handling for
	mem_ap_atomic_write_u32() Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-07-18  David Brownell <dbrownell@users.sourceforge.net>

	* : comments for Luminary ICDI layout Provide $defines for more of the signals involved in the Luminary
	ICDI hardware, and comment some of what's going on.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-07-17  yvind Harboe <oyvind.harboe@zylin.com>

	* : debug-feature: jtagtcpip, improve jtag performance postpone callbacks until jtag execute queue time.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-07-16  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM ADI-V5: cleanup CID/PID addressing Use addition for offsetting, not masking.  Shorten some lines.  Make
	"component_start" print-only (unused otherwise; don't save).  Still doesn't resolve the issue where multiple components are
	wrongly displaying as NVICs on some Cortex-M3 parts because many
	PIDs appear to be zeroes ... maybe adapter related?? Signed-off-by: David Brownell <db@helium.(none)>

2010-07-16  yvind Harboe <oyvind.harboe@zylin.com>

	* : fix warnings Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-07-16  yvind Harboe <oyvind.harboe@zylin.com>

	* : debug feature: jtagtcpip, improve performance waiting for ZY1000 fifo to idle is now queued as an asynchronous
	command. This radically improves performance when waitIdle() is
	interspersed with writes as no readback is required over TCP/IP.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-07-13  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM ADI-V5: PIDs and CIDs are 8 bits Mask the upper bits after 32-bit reads.  Alsoo revert the ugly changes to use PRIx32; just cast to unsized
	integers when printing (two chars not eight).  Signed-off-by: David Brownell <db@helium.(none)>

2010-07-12  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : jtag: fix shadow issues in adapter_init Use global jtag_only rather than local static.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-07-12  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : docs: fix transport typo Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-07-09  David Brownell <dbrownell@users.sourceforge.net>

	* : transport selection tweaks * Bugfix and simplify legacy jtag-only defaulting * Make "dummy" declare its jtag-only nature * likewise update ft2232 * warn if selection is _required_ (multi-transport adapters), fixes the "only ft2232 works" bug for at least dummy, with other
	drivers going the "legacy" path (submit patches).  Signed-off-by: David Brownell <db@helium.(none)>

2010-07-07  yvind Harboe <oyvind.harboe@zylin.com>

	* : transport: fix segfault in transport select String compare against addresses in range 0 or so due to not
	checking if there was an active session first.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-07-05  sb-sf <sb-sf@users.sourceforge.net>

	* : gdbserver: incorrect memory map for multiple targets (bug #24) The gdb server incorrectly reports the memory map if we have
	multiple targets with multiple flash banks.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-07-02  David Brownell <db@helium.(none)>

	* : Fix minor openocd.texi bug ::X Signed-off-by: David Brownell
	<db@helium.(none)>

2010-07-02  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : ft2232: revert ft2232_read_scan changes Revert change made in commit
	dd88b461da1cb8642200dd5c96fb1ff384ca9f7b.  Caused segfaults when
	using ftdi driver under win32.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-06-17  Marc Pignat <marc.pignat@hevs.ch>

	* : ft2232: simplify ft2232_read_scan

2010-06-25  Olaf Lke <olaf@uni-paderborn.de>

	* : at91sam3s* support Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-23  yvind Harboe <oyvind.harboe@zylin.com>

	* : arm11: fix gaffe in no-ack transfers The code did not transfer the last word in no-ack transfers.  The strange thing is that this did not lead to any observable
	errors.  This gaffe was introduced in commit 1f5883ea56cb058221f Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-22  yvind Harboe <oyvind.harboe@zylin.com>

	* : am3517 evm: use physical write to memory while target is running Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-22  yvind Harboe <oyvind.harboe@zylin.com>

	* : target: $_TARGET mdw now has a phys option just like the mdw command Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-21  Edgar Grimberg <edgar.grimberg@zylin.com>

	* : xsvf: Fix shadow issues on Mac wait is declared in /usr/include/sys/wait.h Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>

2010-06-21  Edgar Grimberg <edgar.grimberg@zylin.com>

	* : flash: fix shadow issues on Mac Wait is declared in /usr/include/sys/wait.h Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>

2010-06-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : gitignore: start list of emacs temp files to ignore Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : cortex a8: add error propagation for poll/resume Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : cortex a8: add error propagation for
	mem_ap_read/write_atomic_u32 Error propagation avoids e.g. infinite loops waiting for target to
	halt, etc.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-20  Antonio Borneo <borneo.antonio@gmail.com>

	* : nand/mx2: review scope of symbols Add "static" qualifier to private variable.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-06-20  Antonio Borneo <borneo.antonio@gmail.com>

	* : openocd.c: review scope of symbols Add "static" qualifier to private data.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-06-20  Antonio Borneo <borneo.antonio@gmail.com>

	* : target/avrt: review unused symbols Remove unused functions: - mcu_write_dr_u16 - mcu_write_dr_u8 - mcu_write_ir_u16 - mcu_write_ir_u32 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-06-20  Antonio Borneo <borneo.antonio@gmail.com>

	* : target/feroceon: review scope of symbols Add "static" qualifier to private functions.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-06-19  Antonio Borneo <borneo.antonio@gmail.com>

	* : helper/jim-eventloop.h: review unused definitions Remove unused typedef and define Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-06-19  Antonio Borneo <borneo.antonio@gmail.com>

	* : helper/jim-eventloop: review scope of symbols Add "static" qualifier to private functions.  Remove private
	prototypes from include file.  Remove empty definition of
	JIM_STATIC.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-06-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : jtag: do not use jtag_get_error() normal code should not call jtag_get_error(), but rather check the
	return code from jtag_execute_queue().  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : cortex a8: add missing error handling cortex examine was missing error handling.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-18  yvind Harboe <oyvind.harboe@zylin.com>

	* : cortex a8: fix segfault for unexamined targets print error message instead of segfaulting for unexamined targets.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-18  Antonio Borneo <borneo.antonio@gmail.com>

	* : target/dsp563xx: review scope of symbols Add "static" qualifier to private functions.  Remove private
	prototypes from include file.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-06-18  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : don't add confusing source info to Jim When an interactive command fails, the Jim stack trace prints
	references to the line in "command.c" where the interpreter was
	invoked. Since that location has no relation to the actual command
	that failed, the information serves only to add confusion.  By not adding the useless source info to Jim the noise can be
	reduced, while still printing a useful trace for nested commands.  Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
	Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-18  Antonio Borneo <borneo.antonio@gmail.com>

	* : helper/jim: review scope of symbols Add "static" qualifier to private functions.  Function Jim_InterpolateTokens() is private, but has not been
	changed to "static".  This function is called only once, so compiler
	inlines it.  After inline, there is a warning for variable
	uninitialized.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
	Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-17  Freddie Chopin <freddie_chopin@op.pl>

	* : mingw32: -Wshadow fixes in rlink.c (error: declaration of ‘byte’ shadows a global declaration;

	/usr/local/lib/gcc/i686-w64-mingw32/4.4.2/../../../../i686-w64-mingw32/include/rpcndr.h:50: error: shadowed declaration is here)Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>

2010-06-17  Freddie Chopin <freddie_chopin@op.pl>

	* : mingw32: -Wshadow fixes in jim.c (error: declaration of ‘boolean’ shadows a global
	declaration;

	/usr/local/lib/gcc/i686-w64-mingw32/4.4.2/../../../../i686-w64-mingw32/include/rpcndr.h:52: error: shadowed declaration is here)Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>

2010-06-17  Antonio Borneo <borneo.antonio@gmail.com>

	* : vsllink: fix -Wshadow warning Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-06-17  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: fix arm11 optimisation copy & paste error + added FIFO throttling to work around lockup bug
	in FPGA.  The arm11 optimisation was introduced post v0.4.0, so this is not a
	regression compared to previous release.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-14  Antonio Borneo <borneo.antonio@gmail.com>

	* : nor/at91sam3: replace helper membuf Helper ./src/helper/membuf.c is only used in at91sam3.c 1) Replace membuf with LOG_* 2) The original code in sam3_GetDetails() invalidates    all the buffered output of sam3_GetInfo(). The new    code skips sam3_GetInfo() if its output should not    be printed.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-06-16  yvind Harboe <oyvind.harboe@zylin.com>

	* : gdb: -Wshadow warning fixes Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-16  yvind Harboe <oyvind.harboe@zylin.com>

	* : xsvf: -Wshadow warning fixes I think this fixed an error message where the error message would
	show the *previous* uc code rather than the current unsupported uc
	code.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-16  yvind Harboe <oyvind.harboe@zylin.com>

	* : mflash: -Wshadow warning fix Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-16  yvind Harboe <oyvind.harboe@zylin.com>

	* : nand: when verify failed, it didn't return an error when the verify failed, it didn't return an error, which breaks e.g.
	tcl scripts that rely on this for exceptions to work.  Found by -Wshadow Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-16  yvind Harboe <oyvind.harboe@zylin.com>

	* : str9xpec: -Wshadow warning fixes Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-16  yvind Harboe <oyvind.harboe@zylin.com>

	* : oops... backup file snuck in, remove it.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-16  yvind Harboe <oyvind.harboe@zylin.com>

	* : stm32x: -Wshadow warning fixes Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-15  yvind Harboe <oyvind.harboe@zylin.com>

	* : lpc2900: -Wshadow warning fixes Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-15  yvind Harboe <oyvind.harboe@zylin.com>

	* : ecos flash: -Wshadow warning fixes Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-15  yvind Harboe <oyvind.harboe@zylin.com>

	* : flash: -Wshadow warning fix Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-15  yvind Harboe <oyvind.harboe@zylin.com>

	* : mips32_pracc: -Wshadow warning fixes Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-15  yvind Harboe <oyvind.harboe@zylin.com>

	* : mips32: -Wshadow warning fixes Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-15  yvind Harboe <oyvind.harboe@zylin.com>

	* : arm11_dbgtap: -Wshadow warning fixes Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-15  yvind Harboe <oyvind.harboe@zylin.com>

	* : arm920t: -Wshadow warning fixes Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-15  yvind Harboe <oyvind.harboe@zylin.com>

	* : adi_v5_jtag: -Wshadow warning fixes Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-15  yvind Harboe <oyvind.harboe@zylin.com>

	* : arm_simulator: -Wshadow warning fixes Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-15  yvind Harboe <oyvind.harboe@zylin.com>

	* : target: -Wshdaow warning fix Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-15  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: -Wshadow warning fix Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-15  yvind Harboe <oyvind.harboe@zylin.com>

	* : jim: -Wshadow warning fix Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-14  yvind Harboe <oyvind.harboe@zylin.com>

	* : jim: -Wshadow fixes this batch of fixes should be pretty straightforward rename of
	'index' and an 'i' local variable shadowing.  'index' conflicts with a global name.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-14  michal smulski <michal.smulski@ooma.com>

	* : arm1136 scripts Here is a patch to fix a startup in C100 (arm1136). Basically make
	sure that UART is configured before using it.  Michal Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-14  yvind Harboe <oyvind.harboe@zylin.com>

	* : cfi: add LOG_ERROR() in case of unsupported intel erase
	algorithm found by code inspection. There are many other places in CFI where
	LOG_ERROR() should be called similarly...  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-14  yvind Harboe <oyvind.harboe@zylin.com>

	* : helper: fix -Wshadow warning in number parsing use obtuse local variable names in macros to avoid interfering with
	global name space Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-14  yvind Harboe <oyvind.harboe@zylin.com>

	* : target: fix retval gaffe in mwX commands failure to write to memory was not propagated.  This is an interesting case of broken error handling: with
	exceptions we wouldn't have had this at all, and I also wonder if
	there is a GCC option to warn about these kinds of potential bugs.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-12  Antonio Borneo <borneo.antonio@gmail.com>

	* : TARGET: removed unsed parameter Parameter "type" of function armv4_5_mmu_translate_va() is now not
	used.  Remove the parameter and the "enum" listing its values.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-06-12  Antonio Borneo <borneo.antonio@gmail.com>

	* : TARGET/ARM920T: fix return value Function arm920t_write_memory() default return value should be
	ERROR_OK.  All cases of local errors are handled immediately and not
	further propagated.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-06-11  yvind Harboe <oyvind.harboe@zylin.com>

	* : flash: add error handling to get_flash_by_addr/name autoprobing can fail and this error has to be reported up the call
	stack.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-10  yvind Harboe <oyvind.harboe@zylin.com>

	* : cfi: fix error propagation any read/write operation to memory can fail.  block write algorithm error propagation was broken in that it would
	continue after an error was reported writing data to ram or the
	algorithm failing.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-09  yvind Harboe <oyvind.harboe@zylin.com>

	* : flash: add error message if image is too big for flash replaced assert() w/error message if the image is too big.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-07  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: fix optimisation gaffe DCC optimisation was broken on targets w/multiple TAP's.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-05-05  yvind Harboe <oyvind.harboe@zylin.com>

	* : cfi: fix GDB keep alive bug Long running CFI writes could cause GDB timeout.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-07  yvind Harboe <oyvind.harboe@zylin.com>

	* : gdb-server: fix error reporting bugs GDB and OpenOCD has two different error number spaces and no mapping
	exists between them.  If a specific error number is to be reported to GDB then this has to
	be done at the calling site, rather than as a generic routine that
	tries to map "retval" to GDB error number speak.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-06-01  gcembed <gcembed@gmail.com>

	* : stm32 : change returned value of mass_erase function Hello, "stm32x mass_erase" return ERROR_OK even if something goes
	wrong.  Here is a summary of changes : * in stm32x_mass_erase : return ERROR_FLASH_OPERATION_FAILED when
	error detected in FLASH_SR register; * in COMMAND_HANDLER(stm32x_handle_mass_erase_command) : return the
	returned value of stm32x_mass_erase().  I don't know if there is reason to always return ERROR_OK ? Gaëtan

2010-05-31  Jon Povey <jon.povey@racelogic.co.uk>

	* : etm: print something when trace buffer empty ETM analyze produced no output when the trace buffer was empty.
	This patch provides users with a clue.  Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com>

2010-05-24  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : flash: virtual driver update for get_flash_bank_by_name_noprobe Make sure we do not probe a flash when getting info.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-05-24  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : cfg: add pic32 virtual banks make use of the new virtual bank flash driver.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-05-26  Antonio Borneo <borneo.antonio@gmail.com>

	* : NOR/CFI: fix memory leak; check malloc return value Every time command "flash probe #" is executed, memory structures
	are re-allocated without preventive free() of former areas, causing
	memory leak.  Also, memory allocation does not check return value,
	determining segmentation fault in case of out of memory.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
	Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-05-21  Freddie Chopin <freddie_chopin@op.pl>

	* : All LPC2xxx chips are little endian and that cannot be changed -
	update config scripts Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-05-21  Freddie Chopin <freddie_chopin@op.pl>

	* : Update "flash bank" helper comments for LPC2xxx chips Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-05-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : at91sam9260: use RCLK It might be possible to get this target going without RCLK, but it
	would require more careful analysis and usage of the reset events.  Enable fast memory accesses.  Tested on an at91sam9260 custom board w/external DRAM and flash.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-05-21  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : arm_adi_v5: correct ahbap_debugport_init mem-ap id (bug #23) We request a id register read at the end of ahbap_debugport_init but
	we never actually run the queue. In some cases this causes a
	segfault.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-05-20  gcembed <gcembed@gmail.com>

	* : nand : Add Freescale iMX27 nand flash controller support This patch add support of iMX27 nand flash controller. This is based
	on driver for imx31 nand flash controller.  OOB functionality is not
	fully working. As in mx31 controller, mx2 NFC has a bug that swap
	two bytes between SPARE and MAIN buffer.  I used this driver for
	several months and no problems appear.

2010-05-18  Gary Carlson <gcarlson@carlson-minot.com>

	* : target: slow targets could cause GDB to time out This second half of the patch is proposed to clean up some GDB keep
	alive issues on arm7_9 targets that start up with very slow clocks.
	If an attempt is made to write to key registers on the processor
	with a slow jtag speed, GDB timeout warnings appear on the console
	(at least mine) when "reset halt" or "reset init" commands are
	issued from the gdb client: *** BEFORE PATCH *** (gdb) monitor reset init fast memory access is disabled 2 kHz
	keep_alive() was not invoked in the 1000ms timelimit. GDB alive
	packet not sent! (1026). Workaround: increase "set remotetimeout" in
	GDB JTAG tap: at91sam9g20.cpu tap/device found: 0x0792603f (mfg:
	0x01f, part: 0x7926, ver: 0x0) target state: halted target halted in
	ARM state due to breakpoint, current mode: Supervisor cpsr:
	0x000000d3 pc: 0x00000000 MMU: disabled, D-Cache: disabled, I-Cache:
	disabled keep_alive() was not invoked in the 1000ms timelimit. GDB
	alive packet not sent! (1027). Workaround: increase "set
	remotetimeout" in GDB keep_alive() was not invoked in the 1000ms
	timelimit. GDB alive packet not sent! (1006). Workaround: increase
	"set remotetimeout" in GDB keep_alive() was not invoked in the
	1000ms timelimit. GDB alive packet not sent! (1006). Workaround:
	increase "set remotetimeout" in GDB keep_alive() was not invoked in
	the 1000ms timelimit. GDB alive packet not sent! (1006). Workaround:
	increase "set remotetimeout" in GDB keep_alive() was not invoked in
	the 1000ms timelimit. GDB alive packet not sent! (1004). Workaround:
	increase "set remotetimeout" in GDB RCLK - adaptive dcc downloads
	are enabled fast memory access is enabled NAND flash device 'NAND
	256MiB 3,3V 8-bit' found (gdb) I added additional keep alive steps in areas that troubleshooting
	revealed were causing problems.  I only did this however for
	non-fast write memory accesses.  I don't think most people would be
	using fast memory accesses to write to memory when the jtag and
	system clocks are slow anyway.  If you disagree with my feeling, think there is a more elegant way
	to handle the problem, or think the patch will cause other
	unforeseen problems with other targets, let me know.  As you can see
	below, the patch does eliminate the problem on my development
	station and I suspect that it will benefit others.  *** AFTER PATCH *** (gdb) monitor reset init fast memory access is disabled 2 kHz JTAG
	tap: at91sam9g20.cpu tap/device found: 0x0792603f (mfg: 0x01f, part:
	0x7926, ver: 0x0) target state: halted target halted in ARM state
	due to breakpoint, current mode: Supervisor cpsr: 0x000000d3 pc:
	0x00000000 MMU: disabled, D-Cache: disabled, I-Cache: disabled RCLK
	- adaptive dcc downloads are enabled fast memory access is enabled
	NAND flash device 'NAND 256MiB 3,3V 8-bit' found (gdb) Gary Carlson Gary Carlson, MSEE Principal Engineer Carlson-Minot Inc.

2010-05-18  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: fix false positive warning about unitialized local
	variable Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-05-17  Jon Povey <jon.povey@racelogic.co.uk>

	* : NAND/davinci: Fix segfault for hwecc4_infix reads Page reads using hwecc4_infix layout segfaulted for check_bad_blocks
	because the read assumed a valid data buffer, which check_bad_blocks
	does not use (it only passes a 6 byte buffer for the start of OOB).  This version copes with undersized or missing data or oob buffers
	and uses random read commands within the page to skip unwanted areas
	of data/OOB for speed.  NOTE: Running check_bad_blocks with this layout will be reading
	infix OOB locations, not manufacturer bad block markers. This means
	that if you check blocks written in infix layout they will appear
	good, but manufacturer- marked bad blocks may also appear good.  If
	you want to scan for manufactuer-marked bad blocks, you need to
	enable raw_access before running check_bad_blocks, or use the
	non-infix layout.  Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> CC: David
	Brownell <dbrownell@users.sourceforge.net>

2010-05-17  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : gdbserver: gdb cmds returning failure on success The gdb_memory_map cmd for example fell through and returned
	ERROR_COMMAND_SYNTAX_ERROR on success - behaviour is now as
	expected.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-05-11  Antonio Borneo <borneo.antonio@gmail.com>

	* : NOR/CFI: minor code cleanup Remove few LOG_DEBUG() messages, together with code and variables
	required to build such messages.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-05-11  Antonio Borneo <borneo.antonio@gmail.com>

	* : NOR: add read() callback to struct flash_driver Final target is to force bus_width size during CFI flash read.  In
	this first step I need to replace default flash read with flash
	specific implementation.  This patch introduces: - flash_driver_read() layer; - default_flash_read(), backward compatible; - read() callback in struct flash_driver; - proper initialization in every flash_driver instance.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-05-07  Antonio Borneo <borneo.antonio@gmail.com>

	* : NOR: fix comment for Doxygen Either bus_width and chip_width are in bytes.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-05-07  Antonio Borneo <borneo.antonio@gmail.com>

	* : NOR/CFI: use bus_width for memory access in cfi_write() During cfi_write(), head and tail of destination area could be not
	aligned to bus_width.  Since write operation must be at bus_width
	size, source buffer size is extended and buffer padded with current
	values read from flash.  Force using bus_width to read current value from flash.  Do not use
	cfi_add_byte() anymore, to allow removing this function later on.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-20  Antonio Borneo <borneo.antonio@gmail.com>

	* : NOR/CFI: identify memory accesses not using "bus_width".  Since NOR flash devices does not handle "byte enable lanes", each
	read/write access involves the whole "chip_width".  When multiple
	devices are in parallel, usually all chips are enabled during each
	access.  All such cases are compatible with flash accesses at
	"bus_width" size.  Access at "bus_width" size is mandatory for write access to avoid
	transferring of garbage values to flash.  During read access the
	flash controller should take care, and discard unneeded bytes.
	Anyway, it is good practice to use "bus_width" size also for read.  Every memory access that does not respect "bus_width" size is marked
	with a "FIXME" comment.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-16  Antonio Borneo <borneo.antonio@gmail.com>

	* : NOR/CFI: check "flash bank" command arguments Arguments chip_width and bus_width of command "flash bank" are not
	fully checked.  While bus_width is later on redundantly checked in
	several other parts (e.g. in cfi_command_val()) and generates
	run-time error, chip_width is never checked, nor related to actual
	bus_width value.  Added check to avoid: - (chip_width == 0), that would mean no memory chip at all,   avoiding also division by zero e.g. in cfi_get_u8(); - (bus_width == 0), that would mean no bus at all; - unsupported cases of chip_width or bus_width value not power   of 2; - unsupported case of chip width wider than bus.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-05-14  Jun Ma <sync.jma@gmail.com>

	* : missing pointer's declaration when enable macro
	-D_DEBUG_GDB_IO_.  reproducable when "./configure --enable-maintainer-mode
	CFLAGS=-D_DEBUG_GDB_IO_" Signed-off-by: Jun Ma <sync.jma@gmail.com> Signed-off-by: Øyvind
	Harboe <oyvind.harboe@zylin.com>

2010-05-13  Jon Povey <jon.povey@racelogic.co.uk>

	* : NAND: fix off-by-one error in erase command argument range The last_block argument to nand_erase() is checked against
	nand->num_blocks, but the highest valid block number is (total - 1),
	the test for invalid should be ">=" rather than ">".  Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Signed-off-by:
	Øyvind Harboe <oyvind.harboe@zylin.com>

2010-05-12  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : flash: require unique flash bank name Make sure the flash bank name is unique Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-05-12  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000.cfg: gdb connect will fail first time without gdb-attach gdb-attach does a reset init to make sure that the CFI probe will
	succeed upon first gdb connect.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-05-10  Karl Kurbjun <kkurbjun@gmail.com>

	* : Fujitsu MBM29SL800TE flash support Hi, This is my first post to the list.  First, I would like to thank
	everyone for their work on OpenOCD, it is a great tool to work with.
	I have been using it to debug code on hardware for the Rockbox
	project (www.rockbox.org).  The target that I primarily work with has a Spansion/Fujitsu NOR
	flash (MBM29SL800TE).  I attached a patch that adds support for this
	flash.  I hope it can be included in the main repository.  If there
	is something that needs to be changed with the patch before
	inclusion please let me know.  -Karl Kurbjun

2010-05-11  Marc Pignat <marc.pignat@hevs.ch>

	* : Documentation : arm920t implements armv4 There is a small typo in the cpu list, arm920t is armv4.

2010-05-10  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : armv7m: 20 second timeout/megabyte for CRC check There was a fixed 20 second timeout which is too little for large,
	slow timeout checks.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-05-07  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : cfg: add stm32eval board configs Increase working area for stm3210e_eval.cfg.  Add new configs for
	the following boards: STM321000B-EVAL, STM32100C-EVAL,
	STM32100B-EVAL Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-05-05  yvind Harboe <oyvind.harboe@zylin.com>

	* : flash: stop caching protection state There are a million reasons why cached protection state might be
	stale: power cycling of target, reset, code executing on the target,
	etc.  The "flash protect_check" command is now gone. This is *always*
	executed when running a "flash info".  As a bonus for more a more robust approach, lots of code could be
	deleted.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-05-05  yvind Harboe <oyvind.harboe@zylin.com>

	* : cfi: fix error handling for protect fn No error was propagated.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-05-04  yvind Harboe <oyvind.harboe@zylin.com>

	* : gdb: connect will now fail if flash autoprobe fails This stops GDB from launching with an empty memory map, making gdb
	load w/flashing fail for no obvious reason.  The error message points in the direction of the gdb-attach event
	that can be set up to issue a halt or "reset init" which will put
	GDB in a well defined stated upon attach and thus have a robust
	flash autoprobe.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-05-03  Matthias Bode <papabaer.embedded@googlemail.com>

	* : Fixed bug in tcl-server No segmentationfault when sending commands to tcl-server.  	modified:   src/server/server.c 	modified:   src/server/tcl_server.c 	modified:   src/server/tcl_server.h

2010-05-04  yvind Harboe <oyvind.harboe@zylin.com>

	* : flash: more flash write_image bugfixes Remove/fix lots of bugs in handling of non-contigious sections and
	out of order sections.  Fix a gaffe introduced in previous commit to src/flash/nor/core.c Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-05-05  Marc Pignat <marc.pignat@hevs.ch>

	* : documentation typo Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-05-04  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : str71x: fix previous commit fix build issue with 70226c221f5879bb6126ff3f2ec9ae64c68d80d6 commit Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-05-03  yvind Harboe <oyvind.harboe@zylin.com>

	* : str7x: fix bogus error messages Remove bogus error messages when trying to allocate a large chunk of
	target memory and then falling back to a smaller one.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-05-04  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: wait for srst to deassert make wait for srst deassert more long latency friendly (JTAG over
	TCP/IP), print actual time if it was more than 1ms.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-04-30  Tobias Ringstrm <tobias@ringis.se>

	* : STM32 flash erase timeout fix The current timeout for STM32 flash block erase and flash mass erase
	is 10 (ms), which is too tight, and fails around 50% of the time for
	me.  The data sheet for STM32F107VC specifies a maximum erase time
	of 40 ms (for both operations).  I'd also consider it a bug that the code does not detect a timeout,
	but just assumes that the operation has completed.  The attached
	patch does not address this bug.  The attached patch increases the timeouts from 10 to 100 ms.  Please
	apply.  /Tobias

2010-04-29  yvind Harboe <oyvind.harboe@zylin.com>

	* : flash: write_image would fail for certain images Fix a bug where write_image would fail if the sections in the image
	were not in ascending order. This has previously been fixed in gdb
	load.  Solved by sorting the image sections before running flash
	write_image erase unlock foo.elf.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-04-28  yvind Harboe <oyvind.harboe@zylin.com>

	* : nor: remove bogus output about padding sections padding of 0 bytes is actually no padding, do not output warning
	about padding in that case.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-04-26  Marek Vasut <marek.vasut@gmail.com>

	* : Add VPACLink interface definition This patch adds definition file for the Voipac VPACLink JTAG
	adaptor. The adaptor is combined JTAG/UART device.  Signed-off-by: Marek Vasut <marek.vasut@gmail.com>

2010-04-24  michal smulski <michal.smulski@ooma.com>

	* : telo: update configuration scripts to matched master branch Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-04-20  michal smulski <michal.smulski@ooma.com>

	* : docs: improve load_image docs add docs for missing args.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-04-17  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : stm32x: allow flash probe on a running target If the flash has not yet been probed and GDB connects while the
	target is running, the flash probe triggered by GDB's memory map
	read will fail. In that case the returned memory map will be empty,
	causing a subsequent load from within GDB to fail. There's not much
	you can do from GDB to recover, other than a restart; a 'mon reset
	init' and manual 'mon flash probe' won't help since GDB has already
	made up its mind about the memory map.  It seems there's no reason to require the target to be halted when
	probing the flash. Remove the check to let a valid memory map be
	provided to GDB even when connecting to a running target.  Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>

2010-04-14  Antonio Borneo <borneo.antonio@gmail.com>

	* : NOR/CFI: remove redundant code Arguments for "flash bank" command are already parsed and put in
	"bank" struct.  Removed code to parse them again.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-13  Mike Dunn <mikedunn@newsguy.com>

	* : xscale: fix analyze_trace for trace data collected in wrap mode This patch fixes the xscale_analyze_trace() function.  This function
	was defective for a trace collected in 'fill' mode (hiccups with
	repeated instructions) and completely broken when buffer overflowed
	in 'wrap' mode.  The reason for the latter case is that the
	checkpoint registers were interpreted incorrectly when two
	checkpoints are present in the trace (which will be true in 'wrap'
	mode once the buffer fills).  In this case, checkpoint1 register
	will contain the older entry, and checkpoint0 the newer.  The
	original code assumed the opposite.  I eventually gave up trying to
	understand all the logic of the function, and rewrote it.  I think
	it's much cleaner and understandable now.  I have been using and
	testing this for a few weeks now.  I'm confident it hasn't regressed
	in any way.  Also added capability to handle (as best as possible) the case where
	an instruction can not be read from the loaded trace image; e.g.,
	partial image.  This was a 'TODO' comment in the original
	xscale_analyze_trace().  Outside of xcsale_analyze_trace(), these (related) changes were
	made: - Remove pc_ok and current_pc elements from struct xscale_trace.
	  These elements and associated logic are useless clutter because the
	  very first entry placed in the trace buffer is always an indirect
	  jump to the address at which execution resumed.  This type of trace
	  entry includes the literal address in the trace buffer, so the
	  initial address of the trace is immediately determined from the
	  trace buffer contents and does not need to be recorded when trace is
	enabled.  - Added num_checkpoints to struct xscale_trace_data, which is
	  necessary in order to correctly interpret the checkpoint register
	contents.  - In xscale_read_trace()   - Fix potential array out-of-bounds condition.    - Eliminate partial address entries when parsing trace (can occur
	  in wrap mode).  - Count and record number of checkpoints in trace.  - Added small, inlined utility function xscale_display_instruction()
	  to help make the code more concise and clear.  TODO:  - Save processor state (arm or thumb) in struct xscale_trace when
	   trace is enabled so that trace can be analyzed correctly (currently
	 assumes arm mode).  - Add element to struct xscale_trace that records (when trace is
	   enabled) whether vector table is relocated high (to 0xffff0000) or
	   not, so that a branch to an exception vector is traced correctly
	   (curently assumes vectors at 0x0).

2010-04-14  Anton Fedotov <AD.Fedotov@gmail.com>

	* : cortex-a8: more MMU support + virt2phys() can now convert virtual address to real +
	read_memory() and write_memory() are renamed to read_phys_memory()
	and write_phys_memory() + new read_memory() and write_memory() try
	to resolve real address if mmu is enambled than perform real address
	   reading/writing + if address is bellow 0xc000000 than TTB0 is used
	for page table dereference, if above - than TTB1. Linux style of
	user/kernel address separation    + if above fails (i.e address is unspecified) than mode is
	   checked whether it is Supervisor (than TTB1) or User (than TTB0) - Software breakpoints doesn't work. You should invoke
	"gdb_breakpoint_override hard" before you start debugging +
	cortex_a8_mmu(), cortex_a8_enable_mmu_caches(),
	cortex_a8_disable_mmu_caches() are implemented Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-04-11  Antonio Borneo <borneo.antonio@gmail.com>

	* : NOR/TMS470: review scope of symbols Add "static" qualifier to private functions and data.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-11  Antonio Borneo <borneo.antonio@gmail.com>

	* : TARGET/MIPS32_PRACC: review scope of functions Add "static" qualifier to private functions.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-10  Antonio Borneo <borneo.antonio@gmail.com>

	* : HELPER/LOG: review unused symbols Remove unused functions: - log_catch - log_rethrow - log_try Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-10  Antonio Borneo <borneo.antonio@gmail.com>

	* : NOR/CFI: review scope of functions Add "static" qualifier to private functions.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-10  Antonio Borneo <borneo.antonio@gmail.com>

	* : OPENOCD: review scope of functions Add "static" qualifier to private functions.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-10  Antonio Borneo <borneo.antonio@gmail.com>

	* : BINARYBUFFER: review scope of data and functions Add "static" qualifier to private data and functions.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-10  Antonio Borneo <borneo.antonio@gmail.com>

	* : NAND/TCL: review scope of functions Add "static" qualifier to private functions.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-10  Antonio Borneo <borneo.antonio@gmail.com>

	* : NAND/ARM_IO: review scope of functions Add "static" qualifier to private functions.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-10  Antonio Borneo <borneo.antonio@gmail.com>

	* : NAND/MX3: review scope of data Add "static" qualifier to private data.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-10  Antonio Borneo <borneo.antonio@gmail.com>

	* : NOR/AVRF: review scope of data Add "static" qualifier to private data.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-10  Antonio Borneo <borneo.antonio@gmail.com>

	* : NOR/DRIVERS: review scope of functions Add "static" qualifier to private functions.  Remove unused "extern"
	in src/ecosboard.c Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-10  Antonio Borneo <borneo.antonio@gmail.com>

	* : TCL: review scope of functions Add "static" qualifier to private functions.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-10  Antonio Borneo <borneo.antonio@gmail.com>

	* : HELLO: review unused symbols Remove unused functions: - hello_register_commands Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-10  Antonio Borneo <borneo.antonio@gmail.com>

	* : ADI_V5_JTAG: review scope of data Add "static" qualifier to private data.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-10  Antonio Borneo <borneo.antonio@gmail.com>

	* : ARM_JTAG: review scope of functions Add "static" qualifier to private functions.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-10  Antonio Borneo <borneo.antonio@gmail.com>

	* : ARMV4_5_MMU: review unused symbols Remove unused data: - armv4_5_mmu_page_type_names Remove prototype of not existing
	function: - armv4mmu_translate_va Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-10  Antonio Borneo <borneo.antonio@gmail.com>

	* : EMBEDDEDICE: review scope of functions Add "static" qualifier to private functions.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-10  Antonio Borneo <borneo.antonio@gmail.com>

	* : TARGET: review scope of functions Add "static" qualifier to private functions.  Remove unused "extern"
	in src/ecosboard.c Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-04-04  David Brownell <dbrownell@users.sourceforge.net>

	* : Restore deleted '!' character I'm not sure what caused this significant character to get deleted.
	it may be related to intermittent Editor or terminal flakes  I've
	been seeing lately (sigh).  This fix is trivial.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-04-04  David Brownell <dbrownell@users.sourceforge.net>

	* : simplify and unconfuse target_run_algorithm() For some reason there are *two* schemes for interposing logic into
	the run_algorithm() code path...  One is a standard procedural
	wapper around the target method invocation.  the other (superfluous) one hacked the method table by splicing a
	second procedural wrapper into the method table.  Remove it: 	* Rename its  slightly-more-featureful wrapper so it becomes 	  the standard procedural wrapper, leaving its added logic 	  (where it should have been in the first place.            Also add a paranoia check, to report targets that don't 	  support algorithms without traversing a NULL pointer, and 	  tweak its code structure a bit so it's easier to modify.  	* Get rid of the superfluous/conusing method table hacks.  This is a net simplification, making it simpler to analyse what's
	going on, and then interpose logic . ... by ensuring there's only
	one natural place for it to live.  ------------ Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-03-28  Mike Dunn <mikedunn@newsguy.com>

	* : xscale: fix trace buffer functionality when resuming from a
	breakpoint Problem: halt at a breakpoint, enable trace buffer ('xscale
	trace_buffer enable fill'), then resume.  Wait for debug exception
	when trace buffer fills (if not sooner due to another breakpoint,
	vector catch, etc).  Instead, never halts.  When halted explicitly
	from OpenOCD and trace buffer dumped, it contains only one entry; a
	branch to the address of the original breakpoint.  If the above
	steps are repeated, except that the breakpoint is removed before
	resuming, the trace buffer fills and the debug exception is
	generated, as expected.  Cause: related to how a breakpoint is stepped over on resume.  The
	breakpoint is temporarily removed, and a hardware breakpoint is set
	on the next instruction that will execute.  xscale_debug_entry() is
	called when that breakpoint hits.  This function checks if the trace
	buffer is enabled, and if so reads the trace buffer from the target
	and then disables the trace (unless multiple trace buffers are
	specified by the user when trace is enabled).  Thus you only trace
	one instruction before it is disabled.  Solution: kind of a hack on top of a hack, but it's simple.
	Anything better would involve some refactoring.  This has been
	tested and trace now works as intended, except that the very first
	instruction is not part of the trace when resuming from a
	breakpoint.  TODO: still many issues with trace: doesn't work during
	single-stepping (trace buffer is flushed each step), 'xscale
	analyze_trace' works only marginally for a trace captured in 'fill'
	mode, and not at all for a trace captured in 'wrap' mode.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-03-26  Antonio Borneo <borneo.antonio@gmail.com>

	* : NOR TCL: fix usage message The command "flash bank" has updated syntax.  Add the mandatory
	parameter <target> to the usage message that prints in case of
	error.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-03-04  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: dev tool first cut peek/poke over tcp/ip, used for debug/research purposes
	only. Long term JTAG over TCP/IP might be an offshoot. The
	performance is usable for development/testing purposes.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-03-25  Daniel Bder <openocd@eh-oh.de>

	* : change %x and %d to PRIx32 and PRId32 where needed for cygwin

2010-03-24  Antonio Borneo <borneo.antonio@gmail.com>

	* : telnet_server: review unused symbols Remove unused function Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-03-24  David Brownell <dbrownell@users.sourceforge.net>

	* : FT2232 Messaaging fix The init cleanup patch overlooked a message which was wrongly
	specific to the "usbjtag" layout.  Fix.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-03-24  Antonio Borneo <borneo.antonio@gmail.com>

	* : server: review scope of functions and data Add "static" qualifier to private functions and data.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2010-03-20  Mike Dunn <mikedunn@newsguy.com>

	* : fix software breakpoints on xscale This patch fixes xscale software breakpoints by cleaning the dcache
	and invalidating the icache after the bkpt instruction is inserted
	or removed.  The icache operation is necessary in order to flush the
	fetch buffers, even if the icache is disabled (see section 4.2.7 of
	the xscale core developer's manual).  The dcache is presumed to be
	enabled; no harm done if not.  The dcache is also invalidated after
	cleaning in order to safeguard against a future load of invalid
	data, in the event that cache_clean_address points to memory that is
	valid and in use.  Also corrected a confusing typo I noticed in a comment.  TODO (or not TODO...?): the xscale's 2K "mini dcache" is not
	cleaned.  This cache is not used unless the 'X' bit in the page
	table entry is set.  This is a proprietary xscale extension to the
	ARM architecture.  If a target's OS or executive makes use of this
	for memory regions holding code, the breakpoint problem will
	persist.  Flushing the mini dcache requires that 2K of valid
	cacheable memory (mapped with 'X' bit set) be designated by the user
	for this purpose.  The debug handler that gets downloaded to the
	target will also need to be extended.

2010-03-21  David Brownell <dbrownell@users.sourceforge.net>

	* : ft2232 init mess cleanup In the ft2232 driver, initialization for many layouts punts to a
	routine called usbjtag_init(), instead of a routine specific to each
	layout.  That routine is  a mess  built around a "what type layout am I"
	core.  That's a bad design ... in this case, especially so, since it
	bypasses the layout-specific dispatch which was just done, and
	obfuscates the initialization which is at least somewhat generic,
	instead of being specific to the "usbjtag" layout.  Split and document out the generic parts of usbjtag_init(), and make
	the rest of those layouts have layout-specific init methods.  Also,
	rename usbjtag_reset() ... that also was not specific to the
	"usbjtag" layout, and thus contributed to the previous code
	structure confusion.  (Eventually, all layout-specific code (and method tables) should
	probably live in files specific to each layout.  These changes will
	facilitate those and other cleanups to this driver.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-03-19  yvind Harboe <oyvind.harboe@zylin.com>

	* : jtag: make out_value const Tightens up the jtag_add_xxx_scan() API Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-03-19  David Brownell <dbrownell@users.sourceforge.net>

	* : FT2232 comment tweaks Note that the FT4232 chips have four channels not two, and Elaborate
	on uses of the additional channels.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-03-19  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: fix bug in end state of DCC writes Introduced in latest commits, found by code inspection & GCC
	warning.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-03-18  yvind Harboe <oyvind.harboe@zylin.com>

	* : jtag: remove jtag_get_end_state() usage Code inspection indicated what constant end states to use.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-03-18  yvind Harboe <oyvind.harboe@zylin.com>

	* : jtag: remove unecessary usage of jtag_get_end_state().  By code inspection.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-03-18  Mike Dunn <mikedunn@newsguy.com>

	* : Fix underlying problem with xscale icache and dcache commands Fix problem with the xscale icache and dcache commands.  Both
	commands were enabling or disabling the mmu, not the caches I didn't look any further after my earlier patch fixed the trivial
	problem with command argument parsing.  Turns out the underlying
	code was broken.  The resolution is straightforward when you look at the arguments to
	xscale_enable_mmu_caches() and xscale_disable_mmu_caches().  I
	finally took a deeper look after dumping the cp15 control register
	(XSCALE_CTRL) and seeing that the cache bits weren't changing, but
	the mmu bit was (which caused all manner of grief, as you can
	imagine).  This has been tested and works OK now.   src/target/xscale.c |   17 +++++++++++------  1 files changed, 11 insertions(+), 6 deletions(-) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-03-18  David Brownell <dbrownell@users.sourceforge.net>

	* : commit 52a788e008ecf0ca6156f02de08a0f062d49a236 Author: David
	Brownell <dbrownell@users.sourceforge.net> Date:   Thu Mar 18
	11:56:17 2010 -0700

2010-03-18  yvind Harboe <oyvind.harboe@zylin.com>

	* : jtag: retire one instance of jtag_get_end_state() usage Less global variables....  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-03-18  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : DOCS: update flash bank examples  - include the $_FLASHNAME in all flash bank examples.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-03-17  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : MIPS: remove unused arg from mips_ejtag_set_instr This arg was never used and was just taken from the arm jtag code.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-03-17  yvind Harboe <oyvind.harboe@zylin.com>

	* : linker error: fix problem with duplicate fn A fn was copied instead of moved to a new file. The linker can
	discard exact copies of fn's without warning.  This is a C++'ism.  However on my Ubuntu 9.10 machine, it fails.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-03-17  yvind Harboe <oyvind.harboe@zylin.com>

	* : gdb: long running "monitor mww" now works w/gdb invoke keep_alive() to make sure that the default 2000ms timeout
	does not trigger.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-03-17  yvind Harboe <oyvind.harboe@zylin.com>

	* : target: mdX/mwX on target were badly broken - incorrect parsing of arguments - mdX didn't display arguments correctly I don't think anyone ever used that code path :-) Did you know that "target mdw" and mdw are very different? for {set i 0} {$i < 256} {set i [expr $i+1]} {mwb [expr
	0x2000000+$i] $i}  mdw 0x2000000 0x10 0x02000000: 03020100 07060504 0b0a0908 0f0e0d0c
	13121110 17161514 1b1a1918 1f1e1d1c 0x02000020: 23222120 27262524
	2b2a2928 2f2e2d2c 33323130 37363534 3b3a3938 3f3e3d3c > zy1000.cpu mdb 0x2000000 0x20 0x02000000 00 01 02 03 04 05 06 07
	08 09 0a 0b 0c 0d 0e 0f ................  0x02000010 10 11 12 13 14
	15 16 17 18 19 1a 1b 1c 1d 1e 1f ................  > zy1000.cpu mdh
	0x2000000 0x20 0x02000000 0100 0302 0504 0706 0908 0b0a 0d0c 0f0e
	................  0x02000010 1110 1312 1514 1716 1918 1b1a 1d1c 1f1e
	................  0x02000020 2120 2322 2524 2726 2928 2b2a 2d2c 2f2e
	!"#$%&'()*+,-./ 0x02000030 3130 3332 3534 3736 3938 3b3a 3d3c 3f3e
	0123456789:;<=>? > zy1000.cpu mdw 0x2000000 0x20 0x02000000 03020100
	07060504 0b0a0908 0f0e0d0c ................  0x02000010 13121110
	17161514 1b1a1918 1f1e1d1c ................  0x02000020 23222120
	27262524 2b2a2928 2f2e2d2c  !"#$%&'()*+,-./ 0x02000030 33323130
	37363534 3b3a3938 3f3e3d3c 0123456789:;<=>? 0x02000040 43424140
	47464544 4b4a4948 4f4e4d4c @ABCDEFGHIJKLMNO 0x02000050 53525150
	57565554 5b5a5958 5f5e5d5c PQRSTUVWXYZ[\]^_ 0x02000060 63626160
	67666564 6b6a6968 6f6e6d6c `abcdefghijklmno 0x02000070 73727170
	77767574 7b7a7978 7f7e7d7c pqrstuvwxyz{|}~.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-03-16  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : PIC32: add software reset support The PIC32MX does not support the ejtag software reset - it is
	optional in the ejtag spec.  We perform the equivalent using the microchip specific MTAP cmd's.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-03-16  yvind Harboe <oyvind.harboe@zylin.com>

	* : gdb_server: improved gdb load performance by ack'ing memory writes immediately and reporting either at next
	memory write or stepi/continue time. GDB will then send off a new
	packet that is ready by the time the previous packet has been
	written to target memory.  On faster adapters this can be as much as 10% improvement.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-03-16  yvind Harboe <oyvind.harboe@zylin.com>

	* : arm7/9: remove unused post_restore_context Unused. If something should happen after context restore, then the
	calling code can just do it afterwards.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-03-01  yvind Harboe <oyvind.harboe@zylin.com>

	* : bitbang: add jtag_add_tms_seq support Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-03-16  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : PIC32: add Microchip Explorer16 cfg - add Microchip Explorer16 cfg using PIC32MX360F512L PIM.   - remove reset config from PIC32 target cfg.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-03-15  Bradey Honsinger <bradeyh@gmail.com>

	* : image loading: fix problem with offsets > 0x80000000 Fixes bug that prevented users from specifying a base address of
	0x80000000 or higher in image commands (flash write_image, etm
	image, xscale trace_image).  image.base_address is an offset from the start address contained in
	the image file (if there is one), or from 0 (for binary files). As a
	signed 32-bit int, it couldn't be greater than 0x7fffffff, which is
	a problem when trying to write a binary file to flash above that
	address. Changing it to a 64-bit long long keeps it as a signed
	offset, but allows it to cover the entire 32-bit address space.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-03-15  David Brownell <dbrownell@users.sourceforge.net>

	* : rename jtag_nsrst_assert_width as adapter_nsrst_assert_width Globally rename "jtag_nsrst_assert_width" as
	"adapter_nsrst_assert_width", and move it out of the "jtag" command
	group ...  it needs to be used with non-JTAG transports Includes a migration aid (in jtag/startup.tcl) so that old user
	scripts won't break.  That aid should Sunset in about a year.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-03-15  David Brownell <dbrownell@users.sourceforge.net>

	* : rename jtag_khz as adapter_khz Globally rename "jtag_khz" as "adapter_khz", and move it out of the
	"jtag" command group ...  it needs to be used with non-JTAG
	transports Includes a migration aid (in jtag/startup.tcl) so that old user
	scripts won't break.  That aid should Sunset in about a year.  (We
	may want to update it to include a nag message too.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-03-15  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : PIC32MX: update cfg script The default config script will now dynamically setup the BMX
	registers in the reset init script.  This will also work if the user
	overrides the default working area.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-03-14  David Brownell <dbrownell@users.sourceforge.net>

	* : FT2232: lookup and save layout just once Streamline use of the layout:  have the "ft2232_layout" command look
	it up and save the result, instead of having a few different chunks
	of code looking it up later, and saving just its name (which is
	already part of the layout).  This    - is cleaner    - reports errors sooner    - facilitates earlier adapter-specific setup    - removes unused "default to "usbjtag" logic Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-03-11  David Brownell <dbrownell@users.sourceforge.net>

	* : versaloon cleanup patch Remove undesirable  - backslashes at end-of-line;  - initializations of BSS data to zero/NULL;  - overlong lines (80+ characters)  - whitespace issues  - brackets around single-line statements And other minor issues reported by the Linux "checkpatch" utility Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-03-08  Michal Demin <michaldemin@gmail.com>

	* : Add support for Bus Pirate as a JTAG adapter.  This includes a driver and matching config file.  This support needs
	to be enabled through the initial "configure" (use
	"--enable-buspirate").  Signed-off-by: Michal Demin <michaldemin@gmail.com> Signed-off-by:
	David Brownell <dbrownell@users.sourceforge.net>

2010-03-10  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : MIPS: make fixed code arrays static const Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-03-08  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : PIC32: add flash algorithm support Add flash algorithm support for the PIC32MX.  Still a few things
	todo but this dramatically decreases the programing time, eg. approx
	 programming for 2.5k test file.  - without fastload: 60secs  - with fastload: 45secs  - with fastload and algorithm: 2secs.  Add new devices to supported list.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-03-08  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : STR7: flash loader cleanup - make algorithm array static const.   - increase algorithm buffer size to 32k.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-03-08  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : ADUC702x: flash loader cleanup - make algorithm array static const.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-03-08  David Brownell <dbrownell@users.sourceforge.net>

	* : move a constant table to .rodata section The table of command registration functions shouldn't be in writable
	memory, where stray pointers can clobber it.  Also, it shouldn't be
	initialized at runtime; that just consumes needless code space.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-03-08  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: embedded ice dcc tweak How many bits to shift out before/after enabled tap not in bypass is
	calculated outside the loop. This is more of a demonstration of
	principle and to clarify code than a performance optimisation as
	such. Follows up a bit on the simplification work in jtag interface.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-03-04  yvind Harboe <oyvind.harboe@zylin.com>

	* : jtag: jtag_add_ir_scan() now takes a single field In the code a single field was all that was ever used. Makes
	jtag_add_ir_scan() simpler and leaves more complicated stuff to
	jtag_add_plain_ir_scan().  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-03-06  Antonio Borneo <borneo.antonio@gmail.com>

	* : CFI: review print of Voltage values JEDEC standard reports Vpp integer part encoded as 4 bit HEX value.
	To print it using decimal digits, %u is required.  Other voltage
	values are coded as BCD, so %x is appropriate.  Code already prints one nibble at a time, so no need for field width
	and precision in format string.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
	Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-03-05  David Brownell <dbrownell@users.sourceforge.net>

	* : README: update libftdi version The FT2232H really wants libftdi 0.17 or newer; some notable bugs
	got fixed in that version.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-03-04  yvind Harboe <oyvind.harboe@zylin.com>

	* : minidriver: fix arm11 compilation problem Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-03-03  David Brownell <dbrownell@users.sourceforge.net>

	* : NOR: trim range in flash_driver_protect() When the beginning or end of the specified range of sectors already
	has the requested protection status, don't ask the flash driver to
	change those sectors.  This will among other things turn command sequences like this into
	the NOPs one would expect: 	flash protect_check 0 	flash info 0 		... reports everything as unprotected ...  	flash protect 0 0 1 off That speeds things up (by whatever work was just avoided).  Also, with Stellaris (which can't unprotect flash at  page level)
	this can eliminate some undesirable/false error reports.  (And
	finishes fixing a bug currently listed in our bug database...) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-03-03  David Brownell <dbrownell@users.sourceforge.net>

	* : NOR: stellaris message tweaks Give a more accurate failure message when trying to unprotect; don't
	complain about pages being write protected, just say that unprotect
	is not supported by the hardware ... referencing the new "recover"
	command, which is the way to achieve that.  Likewise, when trying to protect, talk about "pages" (matching
	hardware doc) not "sectors" (an concept that's alien to these
	chips).  Also make the helptext for the "recover" command mention that it
	also erases the device.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-03-02  David Brownell <dbrownell@users.sourceforge.net>

	* : ADIv5: use new DAP ops for AP read/write Make ADIv5 internals use the two new transport-neutral calls for
	reading and writing DP registers; and do the same for external
	callers.  Also, bugfix some of their call sites to handle the fault
	returns, instead of ignoring them.  Remove most of the JTAG-specific calls, using their code as the
	bodies of the JTAG-specific implementation for the new methods.  NOTE that there's a remaining issue:  mem_ap_read_buf_u32() makes
	calls which are JTAG-specific.  A later patch will need to remove
	those, so JTAG-specific operations can be removed from this file,
	and so that SWD support will be able to properly drop in as just a
	transport layer to the ADIv5 infrastructure.  (The way read results
	are posted may need some more attention in the transport-neutrality
	interface.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-03-02  David Brownell <dbrownell@users.sourceforge.net>

	* : ADIv5: use new dap_run() operation Make ADIv5 use one of the new transport-neutral interfaces: call
	dap_run(), not jtagdp_transaction_endcheck().  Also, make that old interface private; and bugfix some of its call
	sites to handle the fault returns, instead of ignoring them.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-03-02  David Brownell <dbrownell@users.sourceforge.net>

	* : target_resume() doxygen Add doxygen for target_resume() ... referencing the still-unresolved
	confusion about what the "debug_execution" parameter means (not all
	CPU support code acts the same).  The 'handle_breakpoints" param seems to have resolved the main issue
	with its semantics, but it wasn't part of the function spec before.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-03-02  David Brownell <dbrownell@users.sourceforge.net>

	* : ADIv5: use right ID for Cortex-M3 ETM Correct a mistake made copying the ID of the Cortex-M3 ETM module
	from the TRM, so that "dap info" on a CM3 with an ETM will now
	correctly describe ROM table entries for such modules.  (They are
	included on LPC17xx and some other cores.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-03-01  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: faster jtag_add_ir_scan() Faster and simpler.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-03-01  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: add jtag_add_tms_seq support Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-02-28  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : armv4_5: remove core_type check in mcr/mrc cmd core_type check is not required as the core function will be null
	for cores that do not support the mcr/mrc functions.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-02-28  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : stellaris: recover_command use usleep rather than sleep windows api does not define a posix sleep, use usleep that has an
	openocd wrapper to the win32 native function.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-02-26  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : semihosting: add armv7m semihosting support do_semihosting and arm_semihosting now check the core type and use
	the generic arm structure.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-02-26  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : CortexM3: move disassemble cmd to arm cmd group Rather than using a Cortex disassemble cmd, we now use the arm
	generic version.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-01-13  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : MIPS: add mips algorithm support  - add mips support for target algorithms.   - added handlers for target_checksum_memory and
	 target_blank_check_memory.  - clean up long lines Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-02-28  Mariano Alvira <mar@devl.org>

	* : Add board/redbee-usb.cfg The Redbee USB is a small form-factor usb stick from Redwire, LLC (www.redwirellc.com/store), built around a Freescale MC13224V
	ARM7TDMI + 802.15.4 radio (plus antenna).  It includes an FT2232H for debugging, with Channel B connected to
	the mc13224v's JTAG interface (unusual) and Channel A connected to
	UART1.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-27  Mariano Alvira <mar@devl.org>

	* : Add target/mc13224v.cfg The MC13224V is a FreeScale ARM7TDMI based IEEE802.15.4 platform for
	Zigbee and similar low-power wireless applications. Using PIP
	(Platform In Package) technology, it integrates: an RF balun and
	matching network; a buck converter (only an external inductor is
	necessary); 96KB of SRAM; and 128KB of non-volatile memory.  It has an integrated bootloader and can boot from a variety of
	sources: external SPI or I2C non-volatile memory, an image loaded
	over UART1, or the internal non-volatile memory. The image loaded
	from one of these sources is executed directly from SRAM starting at
	location 0x00400000.  Open source development code at http://mc1322x.devl.org Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-27  David Brownell <dbrownell@users.sourceforge.net>

	* : ADIv5 DAP ops switching to JTAG or SWD modes Define two new DAP operations which use the new jtag_add_tms_seq()
	calls to put the DAP's transport into either SWD or JTAG mode, when
	the hardware allows.  Tested with the Stellaris 'Recovering a "Locked" Device' procedure,
	which loops five times over both of these.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-27  David Brownell <dbrownell@users.sourceforge.net>

	* : interface: define TMS sequence command For support of SWD we need to be able to clock out special bit
	sequences over TMS or SWDIO.  Create this as a generic operation,
	not yet called by anything, which is split as usual into:  - upper level abstraction ... here, jtag_add_tms_seq();  - midlayer implementation logic hooking that to the lowlevel code;  - lowlevel minidriver operation ... here, interface_add_tms_seq();  - message type for request queue, here JTAG_TMS.  This is done slightly differently than other operations: there's a
	flag saying whether the interface driver supports this request.  (In
	fact a flag *word* so upper layers can learn about other
	capabilities too ...  for example, supporting SWD operations.) That approach (flag) lets this method *eventually* be used to
	eliminate pathmove() and statemove() support from most adapter
	drivers, by moving all that logic into the mid-layer and increasing
	uniformity between the various drivers.  (Which will in turn reduce
	subtle bugginess.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-24  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM ADIv5 doxygen and cleanup Add doxygen for mem_ap_read_buf_u{8,16,32}() calls, and shrink a few
	overlong lines.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-23  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM ADIv5: rename more JTAG-specific routines Highlight more of the internal JTAG-specific utilities, so it's
	easier to identify code needing changes to become transport-neutral.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-09  yvind Harboe <oyvind.harboe@zylin.com>

	* : arm11: allow minidrivers to implement inner loop of memory
	writes This allows minidrivers to e.g. hardware accelerate memory writes.  Same trick as is used for arm7/9 dcc writes.  Added error propagation for memory transfer failures in code
	rearrangement.  Also the JTAG end state is not updated until after the memory write
	run is complete.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-02-21  David Brownell <dbrownell@users.sourceforge.net>

	* : ft2232 table init cleanup Use labeled initializers in the table of layouts instead of
	positional ones.  This ls cleaner and less error prone, plus it
	simplifies patches which add members to these structure.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-21  David Brownell <dbrownell@users.sourceforge.net>

	* : ADIv5: relocate memacess_tck cycles When using an AP to access a memory (or a memory-mapped register),
	some extra TCK (assuming JTAG) cycles should be added to ensure the
	AP has enugh time to complete that access before trying to collect
	the response.  The previous code was adding these cycles *before* trying to access
	(read or write) data to that address, not *after*.  Fix by putting
	the delays in the right location.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-21  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: ADIv5, deadcode cleanup I have no idea what the scan_inout_check() was *expecting* to
	achieve by issuing a read of the DP_RDBUFF register.  But in any
	case, that code was clearly never being called ("invalue" always
	NULL) ... so remove it, and the associated comment.  Also rename it as ap_write_check(), facilitating a cleanup of its
	single call site by removing constant parameters.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-21  David Brownell <dbrownell@users.sourceforge.net>

	* : ADIv5 clean up AP fault handling Pass up fault codes from various routines, so their callers can
	clean up after failures, and remove the FIXME comments highlighting
	those previously goofy code paths.   dap_ap_{read,write}_reg_u32()  dap_ap_write_reg()  mem_ap_{read,write}_u32()  mem_ap_{read,write}_atomic_u32()  dap_setup_accessport() Make dap_ap_write_reg_u32() just wrap dap_ap_write_reg(), instead of
	cloning its core code (and broken fault handling).  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-21  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: keep a handle to the PC Keep a handle to the PC in "struct arm", and use it.  This register
	is used a fair amount, so this is a net minor code shrink (other
	than some line length fixes), but mostly it's to make things more
	readable.  For XScale, fix a dodgy sequence while stepping.  It was
	initializing a variable to a non-NULL value, then updating it to
	handle the step-over-active-breakpoint case, and then later testing
	for non-NULL to see if it should reverse that step-over-active
	logic.  It should have done like ARM7/ARM9 does: init to NULL.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-21  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM11: per-core options should not be global Address some FIXME comments by getting rid of globals, moving
	per-core parameters in the existing per-core data structure.  This will matter most whenever there are multiple ARM11 cores, e.g.
	ARM11 MPcore chips, but in general is just cleanup.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-21  David Brownell <dbrownell@users.sourceforge.net>

	* : Open the merge window for the 0.5.0 release cycle.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-21  David Brownell <dbrownell@users.sourceforge.net>

	* : User's Guide mentions OS-specific installation Specifically the Linux issue of needing "udev" rules, and MS-Windows
	needing driver configuration.  Also, update the existing udev note to use the correct name of that
	rules file in the source tree.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-20  David Brownell <dbrownell@users.sourceforge.net>

	* : CSB337 board cleanup (quasi-regression) Get rid of new nasty warning: NOTE! Severe performance degradation without fast memory access
	enabled...  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-16  Marc Pignat <marc.pignat@hevs.ch>

	* : atm920t : fix breakpoints and data cache handling Breakpoints did not work because the data cache was not flushed
	properly.  As a bonus add capability to write to memory marked as read only by
	the MMU, which allows software breakpoints in such memory regions.

2010-02-15  yvind Harboe <oyvind.harboe@zylin.com>

	* : gpl: fix GPL startup message Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-02-14  Mathias Kuester <mkdorg@users.sourceforge.net>

	* : fix crash with DSP563XX When a DSP563xx-aware GDB asks OpenOCD for target registers, the
	result should be a GDB with register data ... not an OpenOCD crash.  (Note that mainline GDB doesn't currently support this core, so for
	now, this requires a GDB with FreeScale patches.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-13  David Brownell <dbrownell@users.sourceforge.net>

	* : Restore "-dev" version suffix (0.4.0-rc2-dev) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-11  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : STR9xpec: issue warning when unlocking device Issue warning to user when unlocking or writing the option bytes.
	The new settings will not take effect until a target reset.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-02-12  yvind Harboe <oyvind.harboe@zylin.com>

	* : arm720t: virt2phys callback added This is a copy and paste of arm926ejs. Not tested, but ready for
	testing at least. There is a good chance that it will work if the
	generic armv4_5 fn's are robust enough...  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-02-11  Viktar Palstsiuk <viktar.palstsiuk@promwad.com>

	* : target library: configuration files for openocd tested with
	Atmel SAM-ICE V6 JTAG.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-02-10  yvind Harboe <oyvind.harboe@zylin.com>

	* : arm11: fix another infinite loop bug reset init would get stuck in an infinite loop when e.g. khz was too
	high. Added timeout. This is a copy of paste of a number of such
	bugfixes in the arm11 code.  Arm11 code reviewed for further such infinite loop bugs and I
	couldn't find any more. Xing fingers it's the last one...  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-02-09  yvind Harboe <oyvind.harboe@zylin.com>

	* : target: add todo in target_write_memory() about alignment target_write_buffer() does not align "buffer" in host memory passed
	to target_write_memory().  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-02-06  David Brownell <dbrownell@users.sourceforge.net>

	* : Re-title Developer's Guide The Doxygen output was previously titled "OpenOCD Reference Manual",
	which was quite misleading ... the User's Guide is the reference
	manual which folk should consult about how to use the software.  Just rename it to match how it's been discussed previously, and to
	bring out its intended audience:  developers of this software.  As a
	rule, Doxygen is only for folk who work with the code it documents.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-05  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: complete zy1000_uart to jim command switch Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-02-04  David Brownell <dbrownell@users.sourceforge.net>

	* : Documentation: mention bug database Have the User's Guide and BUG handling notes both reference the fact
	that we now have a bug database at SourceForge.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-04  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : CMD: duplicate cmd error msg When registering cmds we report duplicate attempts to register a cmd
	as a LOG_ERROR.  Some situations need this, such as when registering
	dual flash banks.

	http://www.mail-archive.com/openocd-development@lists.berlios.de/msg11152.htmlSigned-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-02-03  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : JTAG: fix bug when no interface connected  - fix coredump when OpenOCD is started without a jtag interface
	 connected.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-02-02  David Brownell <dbrownell@users.sourceforge.net>

	* : NOR: User's Guide updates Remove long-obsolete text about "erase_check" affecting "flash info"
	output.  Move parts of that text to "protect_check", where it's
	still relevant; and update the "flash info" description to mention
	the issue.  (This is still awkward.  It might be best to make "protect_check"
	mirror "erase_check" by dumping what it finds, so "flash info"
	doesn't dump any potentially-stale cache info.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-02-02  Edgar Grimberg <edgar.grimberg@zylin.com>

	* : flash/str7x: After reset init the flash is unlocked The default state of the STR7 flash after a reset init is unlocked.
	The information in the flash driver now reflects this.  The information about the lock status cannot be read from the flash
	chip, so the user is informed that flash info might not contain
	accurate information.  [dbrownell@users.sourceforge.net: line length shrinkage] Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
	Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-29  Edgar Grimberg <edgar.grimberg@zylin.com>

	* : Test cases ran on v0.4.0-rc1 Test cases ran on v0.4.0-rc1 for a number of targets: AT91FR40162
	LPC2148 SAM7 STR710 STR912 The goal of the testing session was to prove basic functionality of
	OpenOCD for different targets.  Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>

2010-01-31  David Brownell <dbrownell@users.sourceforge.net>

	* : ADIv5: more messaging cleanup, docs When the TAR cache was explicitly invalidated, don't bother printing
	it; the actual hardware status is more informative.  Provide some doxygen for the MEM-AP setup routine.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : telnet: fix strage blank spaces at beginning of telnet lines Sometimes we saw two strange blank spaces at the beginning of the
	telnet lines.  progress   ogress > This patch fixes this problem: progress progress > The code changes are *reasonably* clean, but perhaps it could be
	made a bit more elegant, but I didn't want to change things after I
	finished diagnosis/testing & submitting the patch.  The problem was that logging can send the text and the newline
	separately in two different requests and the telnet code would
	incorrectly remove the prompt from the end of a line.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-01-30  David Brownell <dbrownell@users.sourceforge.net>

	* : ADIv5 error checking for Tcl commands Reject invalid AP numbers (256+) as Tcl operation parameters.
	Shrink one of the overlong lines.  Add my copyright to the ADIv5 code (multiple contributions).  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-29  David Brownell <dbrownell@users.sourceforge.net>

	* : ADIv5: cleanup, rename swjdp_transaction_endcheck() Make messages reference "DAP" if they're actually
	transport-agnostic, or "JTAG-DP" when they're JTAG-specific.  Saying
	SWJ-DP is often wrong (on most Cortex-A8 chips) and is confusing
	even if correct (since we don't yet support SWD).  Rename a JTAG-specific routine to jtagdp_transaction_endcheck() to
	highlight that it's JTAG-specific, and that identify DAP clients
	undesirably depending on JTAG.  (They will all need to change for
	SWD support.) Shrink a few overlong lines of code.  Copy a comment from code
	removed in a previous patch (for the ARMv7-M "dap baseaddr"
	command).  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-29  David Brownell <dbrownell@users.sourceforge.net>

	* : NOR: cleanup driver decls Fix goofy struct indents.  Function names *are* their addresses.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-28  David Brownell <dbrownell@users.sourceforge.net>

	* : doc clarifications for server flags The "-f" is a shortcut for "-c" ... and providing any "-c" options
	means the "openocd.cfg" file isn't implicitly used.  Both the User's
	Guide and the manual page were weak on these points, which has led
	to some confusion.  Also update the manual page to include highlights of the search path
	mechanism, including the facts that it exists and that "-s" adds to
	it.  Stop saying only the current directory is involved; the OpenOCD
	script library is quite significant.  (Missing: complete manpage coverage of the search path, including a
	FILES section listing all components and saying where the script
	library is found.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-28  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : ARM semihosting: win32 and cygwin fixes Cygwin would fail to reopen a previously written file if the mode is
	not given.  Simplified converting the open flags and made sure the win32
	O_BINARY bit is set.  Added define for systems that do not support O_BINARY.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-01-27  David Brownell <dbrownell@users.sourceforge.net>

	* : Cortex-M3: report lockup, and recover ARMv7-M defines a "lockup" state that's entered in certain double
	fault sequences which can't be recovered from without external help.
	OpenOCD has previously ignored this.  Issue a diagnostic saying the chip has locked up, and force exit
	from this state by halting the core.  It's not clear this is the
	best way to handle lockup; but there should now be less confusion.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-27  David Brownell <dbrownell@users.sourceforge.net>

	* : Cortex-A8: debug messaging tweaks Make that "TODO" message say what needs to be done.  Say what part
	of examining failed.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-26  David Brownell <dbrownell@users.sourceforge.net>

	* : cygwin buildfix isspace() parameter must be an integer, else a 'char' gets used as
	an array index (sigh).  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-25  Edgar Grimberg <edgar.grimberg@zylin.com>

	* : core arm11: Silence logs at level 3 if there is no activity If the target and openocd are idling, the log should normally be
	silent at level 3.  (Given no verbose logging options.) Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>
	Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-22  David Brownell <dbrownell@users.sourceforge.net>

	* : EmbeddedICE - fix Feroceon/Dragonite message The breakpoint/watchpoint message was wrong for Feroceon and
	Dragonite, which have only one working watchpoint unit.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-22  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM11: fix breakpoints with GDB This fixes a bug whereby GDB's breakpoints weren't activated.  The
	root cause is a confused interface to resume().  Fix by almost
	ignoring the "handle breakpoints" parameter; it only seems related
	to the case of skipping breakpoint-at-PC.  Update a few coments to clarify what's happening.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-21  David Brownell <dbrownell@users.sourceforge.net>

	* : User's Guide secton on target hardware setup Highlight the needs to properly jumper development boards; to make
	the OpenOCD configuration match the jumpering; and to have a usable
	"reset-init" method when debugging early boot code.  Specific mention of the "ATX Mode" that seems useful on many i.MX
	boards, forcing NAND boot.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : target: print reason why GDB halts If GDB halts unexpectedly, print reason: srst assert or power out
	detected.  If polling fails, then things are a bit trickier. We do not want to
	spam telnet or the log with polling failed messages.  Leave that
	case be w/a comment in a code for now.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-01-21  Edgar Grimberg <edgar.grimberg@zylin.com>

	* : target: Fixed format problem for mdh Fixed format problem for mdh. It needs to display 4 chars.  Signed-off-by: Edgar Grimberg <edgar.grimberg@zylin.com>

2010-01-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : ecos: add missing PRId8 definition Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-01-20  David Brownell <dbrownell@users.sourceforge.net>

	* : Cortex-M3 vector_catch testing support The "cm3-ftest.cfg" can be used to verify that OpenOCD handles
	certain faults correctly:  - Test #1: it ignores faults that it wasn't told to catch  - Test #2: if vector_catch is told to catch, it catches The "fault.c" generates ASM code to trigger faults, while the config
	script loads and runs pre-compiled code.  This covers most, but not all, of the vector_catch options.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-20  David Brownell <dbrownell@users.sourceforge.net>

	* : gdb_server: correctly report flash sector sizes Report each region of same-size sectors separately, instead of
	incorrectly reporting that every sector has the same size.  This is a longstanding bug on NOR flash chips with non-uniform
	sector sizes.  It was largely hidden by other bugs in flash
	handling.  When some of those were recently fixed, this one was
	exposed as a regression on str710.  [oyvind.harboe@zylin.com: update the loop to behave on str7 ] Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
	Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-20  yvind Harboe <oyvind.harboe@zylin.com>

	* : testing: fix str710 test case now builds Make the test case easily adjustable in size. str710 has very
	peculiar flash sector layout, nice for testing, but a larget
	test_rom.elf is required.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-01-19  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : ARMV7M: handle bkpt instruction on resume/step Skip over a bkpt instruction if found on resume/step.  Only software
	breakpoints known to OpenOCD are currently handled.  So this handles the special case of either a user added bkpt or
	library added, eg. semi-hosting support.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-01-19  David Brownell <dbrownell@users.sourceforge.net>

	* : gdb_server -- subroutinize memory map logic Put the memory map logic into its own subroutine.  This will make it
	a bit easier to package bugfixes, and simplifies the query packet
	handling.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-21  Andreas Fritiofson <andreas.fritiofson@gmail.com>

	* : update win32 script search path The default script search path on Windows is out of date with the
	current layout (from installation and documentation), which makes
	the standard script library not be found after a normal 	./configure && make && make install under msys/MinGW. The same should hold true for cygwin native builds
	(not verified).  Update search path to ../share/openocd/scripts not ../lib/openocd,
	relative to the openocd executable.  Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
	Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-18  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: flush jtag buffer before changing speed It is conceivable that there could be commands in the queue when a
	speed change request comes in. Flush the hw queue before changing
	speed. Not observed, found by inspection.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-01-19  yvind Harboe <oyvind.harboe@zylin.com>

	* : flash: add error messages upon incorrect arguments to flash
	iteration According to OpenOCD error handling rules the error is logged at
	where it occurs(same site where an exception would have been
	thrown).  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-01-18  yvind Harboe <oyvind.harboe@zylin.com>

	* : commands: allow scan_chain command to be executed during config Adding taps and then dumping them is quite reasonable thing to do in
	a config script.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-01-16  richard vegh <vegh.ricsi@gmail.com>

	* : NAND: lpc3180 crashes on LPC3250 The LPC3180 NAND driver was crashing on some large page chips.  Fix:  - Crash and related functionality (don't memset too much OOB data)  - Some debug messages  - Command handling now works [dbrownell@users.sourceforge.net: whitespace/linelength/message
	cleanup] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-15  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM DPM: disable some nyet-ready breakpoint code Until we manage breakpoints at runtime (patches not ready for 0.4)
	the only way this code should touch them is to disable them at
	server startup (a previous debug session may have left them active).  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-14  David Brownell <dbrownell@users.sourceforge.net>

	* : jtag.h whitespace/comment cleanup Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-14  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM7/ARM9: improved reset support Teach most remaining ARM cores how to use the "reset-assert" event.  Same model as elsewhere:  iff a handler is provided for that event,
	use that instead of trying to assert SRST (which may be unavailable,
	or inappropriate since it resets too much).  Else no change.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-14  Laurentiu Cocanu <laurentiu.cocanu@zylin.com>

	* : str9x.c: remove optimization when erasing the whole bank Using the erase bank command will cause a time out error. Replacing
	this with the erase sector bank will provide a slower but safer and
	stable method to erase the flash.  Signed-off-by: Laurentiu Cocanu <laurentiu.cocanu@zylin.com>
	Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-01-14  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : GDB: change gdb_breakpoint_override to COMMAND_ANY  - enable gdb_breakpoint_override to be used within config script.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-01-13  David Brownell <dbrownell@users.sourceforge.net>

	* : NOR: add optional "flash erase_address" sector padding Add a NOR flash mechanism where erase_address ranges can be padded
	out to sector boundaries, triggering a diagnostic:   > flash erase_address 0x0001f980 16   address range 0x0001f980 .. 0x0001f98f is not sector-aligned   Command handler execution failed   in procedure 'flash' called at file "command.c", line 647   called at file "command.c", line 361   >   > flash erase_address pad 0x0001f980 16   Adding extra erase range, 0x0001f800 to 0x0001f97f   Adding extra erase range, 0x0001f990 to 0x0001fbff   erased address 0x0001f980 (length 16) in 0.095975s (0.163 kb/s)   > This addresses what would otherwise be something of a functional
	regression.  An earlier version of the interface had a dangerous
	problem:  it would silently erase data outside the range it was told
	to erase.  Fixing that bug turned up some folk who relied on that
	unsafe behavior.  (The classic problem with interface bugs!) Now
	they can get that behavior again.  If they really need it, just
	specify "pad".  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-11  yvind Harboe <oyvind.harboe@zylin.com>

	* : arm7/9: enable check that DCC downloads have been enabled Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-01-11  yvind Harboe <oyvind.harboe@zylin.com>

	* : target: add check_reset hook Allow targets to run checks post reset. Used to check that e.g. DCC
	downloads have been enabled.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-01-11  yvind Harboe <oyvind.harboe@zylin.com>

	* : debug: make logging of commands terser one line / command instead of one line per argument.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-01-11  Vladimir Zapolskiy <vzapolskiy@gmail.com>

	* : Added Openmoko USB JTAG interface config file.  Added interface config file for JTAG/RS232 debug board originally
	integrated to Neo 1973 and Neo FreeRunner phones.  Adapter was
	tested with i.MX31, S3C2410 and AT91SAM9260 processors.  Signed-off-by: Vladimir Zapolskiy <vzapolskiy@gmail.com>

2010-01-11  yvind Harboe <oyvind.harboe@zylin.com>

	* : reset: better error messages Use correct tcl syntax to throw exception.  the syntax is "return -code error" not "return -error" Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-01-11  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: reset bugfix flush JTAG FIFO before reset. Fixes RCLK problems observed
	w/lpc2148, but really fixes a wider range of problems.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-01-08  yvind Harboe <oyvind.harboe@zylin.com>

	* : shutdown: more graceful shutdown Shutdown is not an error condition, do not return error from main.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-01-10  David Brownell <dbrownell@users.sourceforge.net>

	* : FreeBSD build fixes Based on notes from Tomek Cedro <tomek.cedro@gmail.com> and Steve
	Franks <bahamasfranks@gmail.com>.  In the User's Guide, sort the list of operating systems reported
	through Tcl with $ocd_HOSTOS ... and include FreeBSD.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-09  David Brownell <dbrownell@users.sourceforge.net>

	* : jtag/tcl help/usage fixups The usual: expand several helptexts to be more correct and to use
	full sentences; make the usage messages use the same EBNF as the
	User's Guide; use function names for their addresses.  Also add a comment about that odd jtag_command_handlers_to_move[]
	thing.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-09  David Brownell <dbrownell@users.sourceforge.net>

	* : jtag: presto, parport help/usage updates Presto: add doxygen file comment.  Parport: note a couple gaps in layout config.  Both: use the uniform EBNF for usage, bugfix helptexts, use function
	name as its address not "&name".  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-09  David Brownell <dbrownell@users.sourceforge.net>

	* : parport (mostly) doc fixes The "parport_port" commands generally don't *require* a port_number;
	they're of the "apply any parameter, then print result" variety.
	Update the User's Guide accordingly.  Some of those commands are intended to be write-once: parport_port,
	and parport_cable.  Say so.  Use proper EBNF for the parport_write_on_exit parameter.  Parport address 0xc8b8 is evidently mutant.  Say so in the
	"parport.cfg" file, to avoid breaking anyone with that mutant
	config.  But update the User's Guide to include a sane example for
	the LP2 port.  Finally document the "presto_serial" command.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-09  David Brownell <dbrownell@users.sourceforge.net>

	* : src/flash/nor: usage/help/doc updates Make "usage" messages use the same EBNF as the User's Guide; no
	angle brackets.  Improve and correct various helptexts.  Don't use "&function"; a function's name is its address.  Remove a
	couple instances of pointless whitespace; shrink a few overlong
	lines; fix some bad indents.  Add TODO list entry re full support for NAND/NOR bank names.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-09  David Brownell <dbrownell@users.sourceforge.net>

	* : src/server: usage/help/doc updates Make "usage" messages use the same EBNF as the User's Guide; no
	angle brackets.  Improve and correct various helptexts.  Specifically for the port commands, clarify that the number is
	optional, and omitting it causes the current number to be displayed.  Don't use "&function"; a function's name is its address.  Remove a
	couple instances of pointless whitespace; shrink a few overlong
	lines.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-08  David Brownell <dbrownell@users.sourceforge.net>

	* : PLD: usage/help updates Make "usage" messages use the same EBNF as the User's Guide; no
	angle brackets.  Improve and correct various helptexts.  Don't use "&function"; a function's name is its address.  Remove a
	couple instances of pointless whitespace, shrink a few overlong
	lines.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-08  David Brownell <dbrownell@users.sourceforge.net>

	* : Doc/examples: clarify usage messages Update/bugfix the "hello" example; emphasize using EBNF syntax,
	matching the User's Guide.  Correct the Texinfo style guide to say
	EBNF, not BNF.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-08  David Brownell <dbrownell@users.sourceforge.net>

	* : MFLASH: help/usage updates Make "usage" messages use the same EBNF as the User's Guide; no
	angle brackets.  Improve and correct various helptexts.  Don't use "&function"; a function's name is its address.  Remove a
	couple instances of pointless whitespace.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-08  David Brownell <dbrownell@users.sourceforge.net>

	* : NOR: add FIXMEs for writing ones It can invalidate ECC codes, and in general is not guaranteed to
	work.  (However on some chips it _appears_ to behave.)  Just don't
	do it; don't write in those cases.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-07  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM966: help/usage updates Usage syntax messages have the same EBNF as the User's Guide; there
	should be no angle brackets in either place.  Fix the User's Guide to say where the magic CP15 bits are defined;
	and add comments in case someone provides mcr/mrc methods.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-07  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM720: help/usage updates Deprecate the "pass an instruction opcode" flavor of cp15 access in
	favor of the "arm mcr ..." and "arm mrc ..." commands, which offer
	fewer ways to break things.  Use the same EBNF syntax in the code as for the user's guide.  Update User's Guide to say where to find those magic values (which
	table in the ARM920 TRM).  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-07  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM11: help/usage updates Usage syntax messages have the same EBNF as the User's Guide; there
	should be no angle brackets in either place.  Uupdate some helptext to be more accurate.  Fix the User's Guide in a few places to be more consistent (mostly
	to use brackets not parentheses) and to recognize that parameter may
	be entirely optional (in which case the command just displays
	output, and changes nothing).  Also reference NXP, not Philips, for
	LPC chips.  Don't use "&function"; functions are like arrays, their address is
	their name.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-07  David Brownell <dbrownell@users.sourceforge.net>

	* : ARMv7: help/usage updates Provide helptext which was sometimes missing; update some of it to
	be more accurate.  Usage syntax messages have the same EBNF as the User's Guide; there
	should be no angle brackets in either place.  Don't use "&function"; functions are like arrays, their address is
	their name.  Shrink some overlong lines, remove some empties.  Add a couple comments about things that should change:  those extra
	TCK cycles for MEM-AP reads are in the wrong place (that might
	explain some problems we've seen); the DAP command tables should be
	shared, not copied.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-07  David Brownell <dbrownell@users.sourceforge.net>

	* : target misc: help/usage updates Provide helptext which was sometimes missing; update some of it to
	be more accurate.  Usage syntax messages have the same EBNF as the User's Guide.  Don't use "&function"; functions are like arrays, their address is
	their name.  Shrink some overlong lines; remove some empties.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-07  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : MIPS: change bulk_write_memory fallback msg to LOG_DEBUG Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-01-06  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : MIPS: fastdata bulk write fallback If fastdata access fails, then fallback to default
	mips_m4k_write_memory Remove unnecessary fastdata loader verify
	check Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-01-05  David Brownell <dbrownell@users.sourceforge.net>

	* : don't require 'openocd.cfg' to start Starting the daemon with with just a bare "openocd" I saw: 	Can't find openocd.cfg That's not an error; don't treat it as if it were.  There may be an
	error later -- like, "no interface set up" -- but let messages only
	report real errors, not fake ones.

2010-01-05  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: add comments re DAP assumptions I think some of these assumptions are not well-founded.  Related,
	that swjdp_transaction_endcheck() is a bit iffy.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-21  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : PIC32: enable ram execution add reset-init script to allow ram execution from reset, this is
	required for ejtag fastdata access.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2009-12-17  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : parport: output port as hex rather than dec Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2010-01-05  yvind Harboe <oyvind.harboe@zylin.com>

	* : gdb: fix regression in gdb_port command The gdb_port command can be invoked during normal execution to
	report the port used for gdb, whereas it was listed as CONFIG stage
	only, which caused an error when excuting it to return the reported
	error.  Also in line with the grander goal of making more commands available
	during all "modes" (perhaps retiring config mode), there is no
	particular reason to limit gdb_port to the config stage.  Regression was introduced in: b3bf1d12b2fdfba1c1cbee3e1afbfbb27cbd1a26 aka v0.4.0-rc1-32-gb3bf1d1 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2010-01-04  David Brownell <dbrownell@users.sourceforge.net>

	* : ARMv7-M:  use AP_REG_* symbol Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-03  David Brownell <dbrownell@users.sourceforge.net>

	* : JTAG/drivers: ft2232 docs Add doxyegen description for this driver.  Correct the helptext (configures *or* displays based on #params),
	and usage (use the same BNF as the User's Guide).  Remove superfluous #include Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-03  David Brownell <dbrownell@users.sourceforge.net>

	* : JTAG: Amontec JTAG accelerater "rtck" is back The command processing conversion a while back lost the "rtck"
	enable/disable command; restore it.  NOTE that having such a command is wrong; there's a standard way to
	enable adaptive clocking ("speed 0").  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-03  David Brownell <dbrownell@users.sourceforge.net>

	* : JTAG/drivers: amt_jtagaccel fixes + cleanup Build fixes:  it failed abysmally with PPDEV enabled.  Swapped a
	build-time error with a FIXME comment in the affected macros.  Cleanup: remove "&" before function pointers, and excess indent, for
	the interface struct declaration.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-02  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: dap info fix + tweaks Fix: don't print the BASE address except if it's a MEM-AP; that's an
	unlikely error, but there's no point getting it wrong.  Tweaks:
	comments, capitalization.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-02  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: ADIv5 symbol and comment cleanup Instead of magic numbers, use their AP_REG_* constants.  Rename the
	ROM address symbol as BASE to match ARM's documentation.  Comment various other symbols in the header; add some missing ones.
	Remove an unused struct.  Add some doxygen for stuff including the
	DAP structure and initialization.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-02  David Brownell <dbrownell@users.sourceforge.net>

	* : streamline and document helptext mode displays Most commands are usable only at runtime; so don't bother saying
	that, it's noise.  Moreover, tokens like EXEC are cryptic.  Be more
	clear: highlight only the commands which may (also) be used during
	the config stage, thus matching the docs more closely.  There are  - Configuration commands (per documentation)  - And also some commands that valid at *any* time.  Update the docs to note that "help" now shows this mode info.  This also highlighted a few mistakes in command configuration,
	mostly commands listed as "valid at any time" which shouldn't have
	been.  This just fixes ones I noted when sanity testing.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2010-01-01  Dean Glazeski <dnglaze@gmail.com>

	* : Add the current command to the command information I wanted to make it so I can be ignorant of a commands invocation
	string, so I tried to use CMD_CURRENT (aka cmd->current) which is
	supposed to house a pointer to the current command.  It turns out
	that this wasn't being set.  This patch adds the current command structure to the command
	invocation structure before sending it along to the command handler.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-31  David Brownell <dbrownell@users.sourceforge.net>

	* : User's Guide: warn about the forum Namely, that developers don't hang out; it's a users-only club.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-31  Antonio Borneo <borneo.antonio@gmail.com>

	* : ARM7_9: Fix segfaults Handlers for commands  - arm7_9 semihosting <enable | disable>  - $_TARGETNAME arp_reset assert 1 didn't check if target has
	already been examined, and could segfault when using the NULL
	pointer "arm7_9->eice_cache".  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
	Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-31  Antonio Borneo <borneo.antonio@gmail.com>

	* : ARM9TDMI: Fix segfault.  The handler for "arm9tdmi vector_catch ..." did not check if target
	has already been examined.  Without this fix it segfaults when using
	NULL pointer "arm7_9->eice_cache".  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
	Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-30  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: add zy1000_ prefix to uart command less polution of the general namespace(preventive action, no
	problems reported).  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-12-29  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: reconfigure FPGA upon reset instead of just the CPU Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-12-25  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: less warnings use inline for static functions in header files to avoid warnings
	about fn not being used.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-12-28  Piotr Esden-Tempski <piotr@esden.net>

	* : Added floss-jtag interface config file.

2009-12-28  Freddie Chopin <freddie_chopin@op.pl>

	* : stm32x commands get "usage" Add .usage fields to stm32x command_registration, so that "help
	stm32x" shows required parameters.  Signed-off-by: Freddie Chopin <freddie_chopin@op.pl> Signed-off-by:
	David Brownell <dbrownell@users.sourceforge.net>

2009-12-28  Piotr Esden-Tempski <piotr@esden.net>

	* : NOR: last_addr also needs correction when checking alignment Otherwise the new alignment checking algorithm thinks that the
	address is not aligned, because it is way beyond the last sector.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-27  David Brownell <dbrownell@users.sourceforge.net>

	* : NOR: make flash_write_unlock() pad to sector end Resolve a regression when using newish automagic "write_image"
	modes, by always padding to the end of affected sectors.  Also document some issues associated with those automagic options,
	in the User's Guide and also some related code comments.  We might need similar padding at the *beginning* of some sectors,
	but this is a minimalist fix for the problems which have currently
	been reported (plus doc updates).  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-09  Dean Glazeski <dnglaze@gmail.com>

	* : Olimex SAM9-L9260 board configuration update.  This updates the board configuration for the SAM9-L9260 board with
	the configuration for the on-board NAND and dataflash.  Included are
	commands for configuring the AT91SAM9 NAND flash driver.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-26  David Brownell <dbrownell@users.sourceforge.net>

	* : User's Guide: update GDB info Advise leaving background polling enabled; fix broken URL; add
	simple program startup example.

2009-12-26  David Brownell <dbrownell@users.sourceforge.net>

	* : NOR: Allocate the right amount of memory Switch to calloc() to simplify review and initialization.

2009-12-26  Antonio Borneo <borneo.antonio@gmail.com>

	* : PARPORT code cleanup: Align elements in array.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>

2009-12-21  David Brownell <dbrownell@users.sourceforge.net>

	* : v0.4.0-rc1 milestone Winter Solstice, 2009.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-21  David Brownell <dbrownell@users.sourceforge.net>

	* : Packaging fix Don't forget to list target/arm_opcodes.h Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-20  David Brownell <dbrownell@users.sourceforge.net>

	* : Cortex-M3: cleanup Misc:  - Introduce some "struct reg" temporaries, for clarity  - Shorten lines  - Add some missing whitespace  - Clean up comments  - Add notes about some fault handling issues  - Most of these errata workarounds are for *OLD* chip revisions Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-21  Antonio Borneo <borneo.antonio@gmail.com>

	* : arm7_9: Support VINITHI signal Command "reset halt" checks if PC properly resets, issueing warning:
	"PC was not 0. Does this target need srst_pulls_trst?".  Checking PC
	against 0 is not always correct.  Removed PC value check, as suggested by Øyvind Harboe.  Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
	Signed-off-by: U-PROPRIET-28D9DF\PROPRIETAIRE
	<PROPRIETAIRE@propriet-28d9df.(none)>

2009-12-09  Dean Glazeski <dnglaze@gmail.com>

	* : AT91SAM9 NAND flash driver.  This creates the TCL interface for configuring an AT91SAM9 NAND
	flash controller and implements the necessary functions to correctly
	work with a NAND flash device connected to the chip.  This includes
	updates to the driver list and the Makefile.am to support building
	the driver and also houses the documentation update in openocd.texi.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-19  David Brownell <dbrownell@users.sourceforge.net>

	* : ETM: add "etm trigger_debug" command In conjunction with manual register setup, this lets the ETM trigger
	cause entry to debug state.   It should make it easier to test and
	bugfix the ETM code, by enabling non-trace usage and isolating bugs
	specific to thef ETM support.  (One current issue being that trace
	data collection using the ETB doesn't yet behave.) For example, many ARM9 cores with an ETM should be able to implement
	four more (simple) breakpoints and two more (simple) watchpoints
	than the EmbeddedICE supports.  Or, they should be able to support
	complex breakpoints, incorporating ETM sequencer, counters, and/or
	subroutine entry/exit criteria int criteria used to trigger debug
	entry.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-19  David Brownell <dbrownell@users.sourceforge.net>

	* : ETM: start cleaning up ETM_CTRL bit handling Provide better comments for the ETM_CTRL bits; use the correct bit
	for half/full clock mode; and define a few more of the bits
	available from the earliest ETM versions.  The new bit defintions use ETM_CTRL_* names to match their register
	(instead of ETM_PORT_* or ETMV1_*).  For clarity, and better
	matching to docs, they are defined with bitshifting not pre-computed
	masks.  Stop abusing typdefs for ETM_CTRL values; such values are not
	limited to the enumerated set of individual bit values.  Rename etm->portmode to etm->control ... and start morphing it into
	a single generic shadow of ETM_CTRL.  Eventually etm->tracemode
	should vanish, so we can just write etm->control to ETM_CTRL.  Restore an "if" that somehow got dropped.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-19  David Brownell <dbrownell@users.sourceforge.net>

	* : NEWS: mention libftdi 0.17

2009-12-18  David Brownell <dbrownell@users.sourceforge.net>

	* : Subject: flash fill[bwh] should use bulk i/o It's currently allocating a big buffer but writing it out in units
	of sizeof(host's pointer) ... sub-optimal.  Plus fix a couple minor coding style goofs.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-18  David Brownell <dbrownell@users.sourceforge.net>

	* : XScale: better {read,write}_phys() We can actually do the right thing if the MMU is off; save the error
	message for the phys-but-MMU-enabled path, which is what isn't yet
	supported.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-18  David Brownell <dbrownell@users.sourceforge.net>

	* : stellaris: update bulk flash writes Try to right-size the SRAM buffers, by not:  - using them for very small writes  - giving up when a large buffer isn't available  - allocating buffers much larger than their data Also don't:  - bother loading the code unless we allocate the writebuffer too  - be so verbose with messaging:     * be more concise     * reduce importance (e.g. DEBUG not WARNING)     * remove duplication The minimum buffer size is something of a guess.  It's eight times
	smaller than before, almost the same size as the code being
	downloaded.  It probably deserves some tuning.  Also, note an erratum affecting flash protection on some chips; and
	narrow many over-wide lines affected by the above changes.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-17  Dean Glazeski <dnglaze@gmail.com>

	* : NAND read data page refactor.  Added a new function to encapsulate reading a page of data from a
	NAND device using either the read_block_data function of a NAND
	controller or to use direct reading of data from the NAND device.  This also adds some performance enhancements and uses the read_data
	function if the read_block_data function fails safely (because it
	can't allocate a buffer in the working area).  [dbrownell@users.sourceforge.net: fix fault handling, whitespace] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-16  David Brownell <dbrownell@users.sourceforge.net>

	* : Remove duplicate Olimex-"tiny" interface We already have tcl/interface/olimex-jtag-tiny.cfg and don't need a
	clone of it.

2009-12-16  David Brownell <dbrownell@users.sourceforge.net>

	* : stellaris: comments Someday revisit various issues:  Tempest parts support writing more
	than one word at a time; for some target firmware it might be
	necessary to save and restore flash IRQ configuration.  (The safest
	policy is likely to always reset after flash updates.) Plus swap some undesirable TAB characters with SPACE.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-16  David Brownell <dbrownell@users.sourceforge.net>

	* : stellaris: remove needless code No point in reading and discarding a status value when fetching part
	description data.  Or having that needless "#if 0" code.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-16  David Brownell <dbrownell@users.sourceforge.net>

	* : NOR: bugfix "flash fill[bwh] ..." helptext These commands don't have a "bank" parameter.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-15  yvind Harboe <oyvind.harboe@zylin.com>

	* : ecos: crisper implementation of timeval_ms() A crisper/faster implementation under eCos that makes profiling a
	tad easier.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-12-15  David Brownell <dbrownell@users.sourceforge.net>

	* : more tcl/{board,target} cleanup Remove more remnants of the old "jtag_device" syntax.  Don't [format "%s.cpu" $_CHIPNAME] ... it's needless complexity.  Remove various non-supported "-variant" target options; they're not
	needed often at all.  Flag some of the board files as needing to have and use target files
	for the TAP and target declarations.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-14  David Brownell <dbrownell@users.sourceforge.net>

	* : XScale: use all-ones for BYPASS, not five-ones PXA3xx has more than five bits in IR.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-15  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: keep up with command.h cleanup Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-12-15  yvind Harboe <oyvind.harboe@zylin.com>

	* : imx31: move srst delay into config script reset init/run now works again.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-12-14  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: disassemble STM correctly There is no "STMMIDA" instruction.  There is however "STMDAMI".  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-14  Yegor Yefremov <yegorslists@googlemail.com>

	* : Common target file for Stellaris chips Common target.cfg file for LM3S CPU family [dbrownell@users.sourceforge.net: rename, generalize more] Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
	Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-14  David Brownell <dbrownell@users.sourceforge.net>

	* : jtag: add '-ignore-version' option Add a "-ignore-version" to "jtag newtap" which makes the IDCODE
	comparison logic optionally ignore version differences.  Update the "scan_chain" command to illustrate this by showing the
	"*" character instead of the (ignored) version nibble.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-13  David Brownell <dbrownell@users.sourceforge.net>

	* : target: further shrink Jim-awareness Don't include <helper/jim.h> from target.h ... not everything which
	touches targets needs to be able to talk to Jim.  Plus, most files
	include this header by another path.  Also, switch the affected files to use the classic sequence for
	#included files:  all <framework/headers.h> first, then the
	"local_headers.h".  This helps prevent growth of problematic
	layering, by minimizing entanglement.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-11  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM11: avoid pointless status returns For some routines that only returned ERROR_OK and where the caller
	never checked ... don't bother.  Remove some noise, and bugfix some
	comments.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-11  Zachary T Welch <zw@superlucidity.net>

	* : fix 'write_image' usage information The 'flash write_image' command erroneously listed the bank number,
	when it actually uses target addresses to do that lookup for the
	user.

2009-12-11  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: disassembly fixes for LDC/STC/MRRC/MCRR Properly detect all of these, including the "2" variants; and bugfix
	parameter display for LDC and STC.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-10  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : server: add server_preinit which is called before config file is
	parsed.  This fixes the issue under native win32 of the socket interface not
	being enabled (via WSAStartup) before init is called from a script.  Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2009-12-10  yvind Harboe <oyvind.harboe@zylin.com>

	* : gdb_server: use more local variables in inner loop of fetching
	packetstiny refactoring to allow optimisation of inner loops Some profiling information for arm7 16MHz GDB load operation shows
	gdb_get_packet_inner() near the very top.  Each sample counts as 0.01 seconds.    %   cumulative   self              self     total  time   seconds   seconds    calls  Ts/call  Ts/call  name  52.91      2.27     2.27
	 embeddedice_write_dcc 11.89      2.78     0.51
	  gdb_get_packet_inner 8.86      3.16     0.38
	  memcpy 3.26      3.30     0.14
	  idle_thread_main(unsigned int) 3.03      3.43     0.13
	cyg_in_cksum Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-12-10  yvind Harboe <oyvind.harboe@zylin.com>

	* : optimisation: tiny optimisation for embedded ice use two shift operations instead of three to set embedded ice
	register.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-12-10  David Brownell <dbrownell@users.sourceforge.net>

	* : anotyer cygwin compile fix Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-09  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: update arm_opcodes.h copyright I neglected to copy Magnus' copyright when I moved several
	declarations from the ARMv7-M header.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-09  David Brownell <dbrownell@users.sourceforge.net>

	* : Comment and doxygen fixes Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-08  Rafael Campos Las Heras <methril@gmail.com>

	* : Fix compilation error with gcc 4.4.1 Signed-off-by: Rafael Campos Las Heras <methril@gmail.com>

2009-12-08  David Brownell <dbrownell@users.sourceforge.net>

	* : target: remove needless "extern"s Most of these happened to be in the target.h file.  Some of those are associated with symbols that could be removed at
	some point ... e.g. NVP_ASSERT/true and its sibling
	NVP_DEASSERT/false.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-08  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: cygwin complile fixes It's as if despite integers being 32-bits, GCC refuses to convert a
	"uint32_t" to one of them.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-04  yvind Harboe <oyvind.harboe@zylin.com>

	* : minidriver: fix inline capability of minidriver Low latency low CPU processing power systems(embedded) will benefit
	greatly from being able to inline certain jtag_add_xxx() fn's. The
	trick is that this has to be done in such a way as to allow
	implementing an OpenOCD API with a shared library(eventually) on a
	PC hosted OpenOCD.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-12-05  yvind Harboe <oyvind.harboe@zylin.com>

	* : build: add build/src to include path This allows including generated include files.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-12-07  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: list number of HW breakpoints/watchpoints When starting up, say how many hardware breakpoints and watchpoints
	are available on various targets.  This makes it easier to tell GDB how many of those resources exist.
	Its remote protocol currently has no way to ask OpenOCD for that
	information, so it must configured by hand (or not at all).  Update the docs to mention this; remove obsolete "don't do this"
	info.  Presentation of GDB setup information is still a mess, but at
	least it calls out the three components that need setup.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-07  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: don't clone arm_arch_state() code Have various ARM cores delegate to arm_arch_state() to display basic
	information, instead of duplicating that logic.  This shrinks the code, makes them all report when semihosting is
	active, and highlights which data are specific to this core.  (Like
	ARM720 not having separate instruction and data caches.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-07  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: use <target/arm.h> not armv4_5.h Move most declarations in <target/armv4_5.h> to <target/arm.h> and
	update users.  What's left in the older file is stuff that I think should be
	removed ... the old register cache access stuff, which makes it
	awkward to support microcontroller profile (Cortex-M) cores.  The armv4_5_run_algorithm() declaration was moved too, even though
	it's not yet as generic as it probably ought to be.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-07  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: move opcode macros to <target/arm_opcodes.h> Move the ARM opcode macros from <target/armv4_5.h>, and a few Thumb2
	ones from <target/armv7m.h>, to more appropriate homes in a new
	<target/arm_opcodes.h> file.  Removed duplicate opcodes from that v7m/Thumb2 set.  Protected a few
	macro argument references by adding missing parentheses.  Tightening up some of the line lengths turned up a curious artifact:
	the macros for the Thumb opcodes are all 32 bits wide, not 16 bits.
	There's currently no explanation for why it's done that way...  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-07  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: disassemble two more v6+ instructions The SRS and RFE instructions speed exception entry/exit by making it
	easy to save and restore PC and SPSR.  This handles both ARM and
	Thumb2 encodings.  Fix minor PLD goofage; that "should never reach this point" can't
	happen, so remove it.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-07  David Brownell <dbrownell@users.sourceforge.net>

	* : OMAP2420: define reset-assert event Behave like OMAP3530:  force global software reset.  Given the patch
	to teach ARM11 how to use these events, and use VCR to catch the
	reset vector, this works better than either the current reset logic
	or than using SRST.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-06  Zachary T Welch <zw@superlucidity.net>

	* : add 'flash list', rewrite 'flash banks' Rename the existing 'flash banks' implementation as 'flash list',
	and replace the broken 'flash_banks' TCL wrapper with a new command
	handler.  Adds documentation for the new 'flash list' command in the user
	guide.

2009-12-06  Zachary T Welch <zw@superlucidity.net>

	* : fix NOR flash regression When factoring the bank setup command into flash_bank_add(), I
	forgot to include a call to the new helper.

2009-12-05  Mathias Kuester <kesmtp@freenet.de>

	* : NOR: add 29LV400BC flash device Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-05  Nicolas Pitre <nico@fluxnic.net>

	* : ARM semihosting: work with both low and high vectors Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: David
	Brownell <dbrownell@users.sourceforge.net>

2009-12-04  Zachary T Welch <zw@superlucidity.net>

	* : move remaining nand helper files Move remaining NAND implementation files into src/flash/nand/.

2009-12-04  Zachary T Welch <zw@superlucidity.net>

	* : split NAND driver handling into nand/driver.[ch] This work parallels the NOR directory, encapsulating the NAND
	drivers into a separate file.  This takes an extra step by
	encapsulating the type of data structure used to manage the drivers,
	allowing it to be changed from an array to a dynamic list in the
	future.

2009-12-04  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: rename armv4_5_build_reg_cache() as arm_*() Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-04  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: misc generic cleanup Remove an undesirable use of the CPSR symbol ... it needs to vanish.
	Flag mode-to-number stuff as obsolete; say why ... should also
	vanish.  Get rid of no-longer-used mode and state typedefs.  Comment a few of the implicit ties to "classic ARM".  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-04  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: switch target_to_armv4_5() to target_to_arm() And remove that old symbol.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-04  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: rename armv4_5_mode_* AS arm_mode_* Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-04  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: rename ARMV4_5_STATE_* as ARM_STATE_* Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-04  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM11: basic watchpoint support Use the DPM watchpoint support; remove old incomplete stubs.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-04  Zachary T Welch <zw@superlucidity.net>

	* : reorder build order of src directory Descend into the library modules in order, from bottom-to-top.

2009-12-04  Zachary T Welch <zw@superlucidity.net>

	* : split flash.h into into flash/nor/*.h Move the bulk of the flash.h file into flash/nor/core.h, leaving an
	empty husk that will be removed in the next patch.  The NOR driver structure is an implementation detail, so move it
	into its own private header file <flash/nor/driver.h> along with
	helper declaration for finding them by name.

2009-12-04  Zachary T Welch <zw@superlucidity.net>

	* : split NOR and NAND flash headers Moves common flash errors to <flash/common.h> to decouple these two
	mostly unrelated trees of code.

2009-12-04  Zachary T Welch <zw@superlucidity.net>

	* : add flash/nor/drivers.c Encapsulates access to the flash_drivers array, providing a base of
	operations for future dynamic driver module loading features.

2009-12-04  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: semihosting entry cleanup Clean up arm_semihosting() entry a bit, comment some issues and just
	which SVC opcodes are getting intercepted.  Microcontroller profile
	cores will need a new entry, since they use BKPT instead (and don't
	have either SVC mode or an SPSR register).  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-04  David Brownell <dbrownell@users.sourceforge.net>

	* : User's Guide: more semihosting info List it in the concept index, in the section about target software
	changes a project might want to consider, and in the section about
	debug messaging.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : add flash/nor/core.[ch] The newly moved flash TCL routines access the internals of the
	module too much.  Fix the layering issues by adding new core NOR
	flash APIs: <flash/nor/core.h>:   - flash_driver_find_by_name() - self-descriptive <flash/nor/imp.h>:   - flash_bank_add()            - encapsulates adding banks to bank
	  list - flash_bank_list()           - encapsulates retreiving bank list This allows the externs in flash/nor/imp.h to be removed, and these
	mechanisms may now be re-used by other flash module code.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : separate Jim from jtag/core.c After previous efforts, only one Jim routine remained in
	jtag/core.c, and moving it to jtag/tcl.c painlessly finishes
	separating these layers.  The headers need separating, but the
	implementation is clean.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : check top-level command registrations When calling module_register_commands, the return value needs to be
	checked for failures.  Instead of duplicating code, use an array of
	function pointers to the identical registration functions to iterate
	over during startup.

2009-12-04  David Brownell <dbrownell@users.sourceforge.net>

	* : target: cygwin build fixes Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-03  Nicolas Pitre <nico@fluxnic.net>

	* : basic ARM semihosting support Semihosting enables code running on an ARM target to use the I/O
	facilities on the host computer. The target application must be
	linked against a library that forwards operation requests by using
	the SVC instruction that is trapped at the Supervisor Call vector by
	the debugger.  The "hosted" library version provided with
	CodeSourcery's Sourcery G++ Lite for ARM EABI is one example.  This is currently available for ARM9 processors, but any ARM variant
	should be able to support this with little additional work.  Tested using binaries compiled with Sourcery G++ Lite 2009q1-161 and
	ARM RVCT 3.0.  [dbrownell@users.sourceforge.net: doc tweaks, NEWS] Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: David
	Brownell <dbrownell@users.sourceforge.net>

2009-11-16  Dean Glazeski <dnglaze@gmail.com>

	* : Make ARM NAND I/O operations aware of last op Updates the ARM NAND I/O code to look at and update the op field of
	arm_nand_data to reflect the last operation performed.  It uses this
	field to copy the correct code to the target in the case where the
	struct is used for reads and writes.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-20  Dean Glazeski <dnglaze@gmail.com>

	* : NAND page command refactoring.  Created a new function that handles sending a command and the
	address information for pages to a NAND device.  [dbrownell@users.sourceforge.net: tweaked line lengths, name
	'oob_only'] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-03  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM DPM: share debug reason logic No point in both ARM11 and Cortex-A8 having private copies of the
	logic sorting out e.g. DBG_REASON_WATCHPOINT.  Add and use a shared routine for this ... there's actually a bunch
	more debug entry logic that could be shared, this is just a start on
	that.  Note that this routine fixes a bug observed in the ARM11
	code, where some abort mode quirks were displayed as being an
	unknown debug reason; and also silences needless ARM11 chatter.  Likewise with private copies of DSCR ... add one to the DPM struct.
	Save it as part of setting DBG_REASON_* so later patches can switch
	over to using that copy.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-03  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM DPM: make DSCR bit defs sharable Move the symbols for these bits from "armv7a.h" to "arm_dpm.h",
	where they can be seen and used not just by Cortex-A but also by the
	ARM11 (armv6) code.  Change them from bit numbers to bit masks ... this matches the usage
	in ARM11 code, and also makes it easier to read.  Rename DSCR_EXT_INT_EN as DSCR_ITR_EN to match the docs; it's
	enabling ITR functionality, not external interrupts, so this changes
	the name to be less misleading.  (There *IS* a bit affecting
	interrupts, and this isn't it.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : fix double 'init' regression To prevent regression in the behavior of 'init', we allow it to run
	in any mode.  If provided with -c init and with -c noinit, then the
	second init at startup caused a spurious mode failure.  Let 'init'
	handle it.

2009-12-03  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: include files have moved about now compiles again after include files were moved about to reduce -I
	usage and stop using quotes but rather angle brackets for include
	files.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "../hello.h" to "hello.h" Before we can -I the top-level src/ directory alone, references to
	"hello.h" must be updated.  This is an internal header, so it does
	not need angle brackets.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "svf.h" to <svf/svf.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "svf.h" the following form should be used.  	#include <svf/svf.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "telnet_server.h" to <server/telnet_server.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "telnet_server.h" the following form should be used.  	#include <server/telnet_server.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "httpd.h" to <server/httpd.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "httpd.h" the following form should be used.  	#include <server/httpd.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "s3c24xx_regs.h" to <flash/nand/s3c24xx_regs.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "s3c24xx_regs.h" the following form should be used.  	#include <flash/nand/s3c24xx_regs.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "nand.h" to <flash/nand.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "nand.h" the following form should be used.  	#include <flash/nand.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "flash.h" to <flash/flash.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "flash.h" the following form should be used.  	#include <flash/flash.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "trace.h" to <target/trace.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "trace.h" the following form should be used.  	#include <target/trace.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "target.h" to <target/target.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "target.h" the following form should be used.  	#include <target/target.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "mips_ejtag.h" to <target/mips_ejtag.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "mips_ejtag.h" the following form should be used.  	#include <target/mips_ejtag.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "mips32.h" to <target/mips32.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "mips32.h" the following form should be used.  	#include <target/mips32.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "etm.h" to <target/etm.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "etm.h" the following form should be used.  	#include <target/etm.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "breakpoints.h" to <target/breakpoints.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "breakpoints.h" the following form should be used.  	#include <target/breakpoints.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "armv7m.h" to <target/armv7m.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "armv7m.h" the following form should be used.  	#include <target/armv7m.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "armv4_5_mmu.h" to <target/armv4_5_mmu.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "armv4_5_mmu.h" the following form should be used.  	#include <target/armv4_5_mmu.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "armv4_5.h" to <target/armv4_5.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "armv4_5.h" the following form should be used.  	#include <target/armv4_5.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "arm_dpm.h" to <target/arm_dpm.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "arm_dpm.h" the following form should be used.  	#include <target/arm_dpm.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "arm9tdmi.h" to <target/arm9tdmi.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "arm9tdmi.h" the following form should be used.  	#include <target/arm9tdmi.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "arm7tdmi.h" to <target/arm7tdmi.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "arm7tdmi.h" the following form should be used.  	#include <target/arm7tdmi.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "arm11.h" to <target/arm11.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "arm11.h" the following form should be used.  	#include <target/arm11.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "minidriver.h" to <jtag/minidriver.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "minidriver.h" the following form should be used.  	#include <jtag/minidriver.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "interface.h" to <jtag/interface.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "interface.h" the following form should be used.  	#include <jtag/interface.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "types.h" to <helper/types.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "types.h" the following form should be used.  	#include <helper/types.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "replacements.h" to <helper/replacements.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "replacements.h" the following form should be used.  	#include <helper/replacements.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "log.h" to <helper/log.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "log.h" the following form should be used.  	#include <helper/log.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "ioutil.h" to <helper/ioutil.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "ioutil.h" the following form should be used.  	#include <helper/ioutil.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "configuration.h" to <helper/configuration.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "configuration.h" the following form should be used.  	#include <helper/configuration.h> The exception is from .c files in the same directory.

2009-12-03  Zachary T Welch <zw@superlucidity.net>

	* : change #include "binarybuffer.h" to <helper/binarybuffer.h> Changes from the flat namespace to heirarchical one.  Instead of
	writing: 	#include "binarybuffer.h" the following form should be used.  	#include <helper/binarybuffer.h> The exception is from .c files in the same directory.

2009-11-28  Zachary T Welch <zw@superlucidity.net>

	* : change autoconf #include in configure.in Updates "system.h" and "replacements.h" with <helpers/system.h> and
	<helpers/replacements.h> respectively.

2009-12-03  Nicolas Pitre <nico@fluxnic.net>

	* : feroceon.c should be part of ARM7_9_SRC The Feroceon and Dragonite cores are similar to the ARM926 and
	ARM966 cores respectively.  Signed-off-by: Nicolas Pitre <nico@marvell.com>

2009-12-02  Zachary T Welch <zw@superlucidity.net>

	* : move jtag drivers to src/jtag/drivers Moves JTAG interface drivers to src/jtag/drivers/, Adds
	src/jtag/drivers/Makefile.am.  Builds libocdjtagdrivers.la.  Flattens the rlink driver files into the drivers/ directory, adding
	the 'rlink_' prefix or '.rlink' suffix as appropriate.

2009-12-01  Zachary T Welch <zw@superlucidity.net>

	* : move nand drivers to src/flash/nand/ Moves NAND drivers to src/flash/nand/.  Adds
	src/flash/nand/Makefile.am.  Builds libocdflashnand.la.

2009-12-02  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM11: store a clean copy of DSCR Just store a clean copy of DSCR in the per-CPU struct, so we
	trivially pass a pointer to a recent copy.  This replaces the
	previous "last_dscr" and cleans up most of the related calling
	conventions ... but it doesn't remove the other DSCR copy.

2009-12-02  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM11: don't expose RDTR Don't expose the RDTR register through the register cache any more.
	If anyone wants Tcl scripts to be able to use DCC based
	communication with app code in the target, this wouldn't do it.  Bugfix:  don't trust the Tcl-accessible version of DSCR to flag
	whether RDTR needs to be restored when resuming.

2009-12-02  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM11: remove arm11->target Don't need/want arm11->target; we have arm11->arm.target instead.
	Also remove some unused watchpoint stuff.

2009-12-02  Zachary T Welch <zw@superlucidity.net>

	* : fix configure problem when building w/o USB If building OpenOCD without any USB drivers, a warning would appear
	because $build_usb is never set to a sane default.  This fixes it.

2009-12-02  Zachary T Welch <zw@superlucidity.net>

	* : fix 'target init' command registration The command handler registration was put at the top level, rather
	than as a subcommand.  Move it to where it belongs.

2009-12-01  Zachary T Welch <zw@superlucidity.net>

	* : remove #if BUILD_HTTPD Add httpd_stubs.c to provide no-op implementations of httpd_start()
	and httpd_stop().  Allows these routines to be called unconditionally and ensures the
	libocdserver ABI remains unchanged regardless of whether this
	feature was built-in or not.  Prints a DEBUG message when the stub implementation is included.

2009-12-01  Zachary T Welch <zw@superlucidity.net>

	* : remove #if logic for openocd_sleep_*lude Adds server_stubs.c to hold these routines, using automake logic to
	ensure it gets included under the right conditions.

2009-11-30  Zachary T Welch <zw@superlucidity.net>

	* : target: factor target_init() into pieces Moves body of target initialization loop into a helper function,
	cleaning up its visual flow in the process.

2009-11-30  Zachary T Welch <zw@superlucidity.net>

	* : flash: factor init to 'flash init' Split flash initialiation into 'flash init', called from 'init'.

2009-11-30  Zachary T Welch <zw@superlucidity.net>

	* : nand: factor init to 'nand init' Split NAND initialization into 'nand init', which gets called from
	the main 'init' command.

2009-12-02  David Brownell <dbrownell@users.sourceforge.net>

	* : ARMv7a/Cortex-A8: report watchpoint trigger insn Save and display the address of the instruction which triggered the
	watchpoint.  Because of pipelining, that's well behind the PC value
	when debug entry completes.  (Example in a subroutine that had been
	returned from...) Remove unused A8 stuff, mostly watchpoint hooks from the header.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-02  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: keep up with startup refactoring work.  keep up with server_init() introduction.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-12-01  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: core DPM support for watchpoints This is a NOP unless the underlying core exposes two new methods,
	and neither of the two cores using this (ARM11xx, Cortex-A8) do so
	yet.  This patch only updates those cores so they pass a flag saying
	whether or not to update breakpoint and watchpoint status before
	resuming; and removing some now-needless anti-segfault code from
	ARM11.  Cortex-A8 didn't have that code ... yes, it segfaulted when
	setting watchpoints.  NOTE:  this uses a slightly different strategy for setting/clearing
	breakpoints than the ARM7/ARM9/etc code uses.  It leaves them alone
	unless it's *got* to change something, to speed halt/resume cycles
	(including single stepping).  ALSO NOTE:  this under-delivers for Cortex-A8, where regions with
	size up to 2 GBytes can be watched ... it handles watchpoints which
	ARM11 can also handle (size 1/2/4 bytes).  Should get fixed later.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-01  David Brownell <dbrownell@users.sourceforge.net>

	* : Tcl and doc: update to match new 'arm mcr ...' etc Make them match the C code.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-01  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: keep up with latest changes to command handling Keep up with Jim Tcl interpreter creation cleanup.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-12-01  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM11: remove previous mcr()/mrc() methods We don't need this code, now that the DPM code handles it.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-01  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: implement mrc()/mcr() as DPM ops Instead of having separate ARM11 and Cortex-A8 implementations of
	this code, have one shared implementation which just builds on the
	existing "run instruction via R0" support.  This enables followup patches to remove that now-unused code from
	those two drivers.  (Patches to move the "mrc" and "mcr" code into
	"struct arm" are due too ... MIPS and other cores do not support
	those ARM-specific concepts.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-12-01  David Brownell <dbrownell@users.sourceforge.net>

	* : ARMv7-A: stop using CP15 ops The ARMv7-A code uses read_cp15() to access fault registers.
	Instead, use DPM operations directly, passing in the relevant MRC
	instructions.  This eliminates per-operation overhead (though it'll be hard to
	observe, this is uncommon) and helps eliminate read_cp15().  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-30  yvind Harboe <oyvind.harboe@zylin.com>

	* : main: invoke jtag_interface_quit() explicitly There is no particular reason to invoke jtag_interface_quit() on the
	atexit() handler, it just makes the code more obtuse and stops other
	legitimate usage of atexit().  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-30  David Brownell <dbrownell@users.sourceforge.net>

	* : XScale: restore_context() cleanup Clean up two aspects to this routine:  bad naming, since it doesn't
	restore the context, just the banked registers; and excess
	indentation for the bulk of the code.  Also make some of its call sites stash the function's return code;
	someday they should use it for error checking.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-29  Zachary T Welch <zw@superlucidity.net>

	* : remove interp global variable! Finish removing references to the 'interp' global variable from the
	command module, encapsulating all reference via command_context.  Eliminates use of the global entirely, so it can be removed.
	Hurrah!

2009-11-29  Zachary T Welch <zw@superlucidity.net>

	* : do not extern 'interp' from command.c Adds 'interp' field to command_context, chasing the few remaining
	references to the global variable outside of the command module.

2009-11-29  Zachary T Welch <zw@superlucidity.net>

	* : jtag: avoid using interp global variable Adds 'interp' field to jtag_tap_event_action structure to avoid
	using the global variable of same name.

2009-11-29  Zachary T Welch <zw@superlucidity.net>

	* : make syntax errors respond with 'usage' The 'help' text will become more verbose, so its entire text will be
	far more than desired when you only borked your syntax.  The usage
	still allows the commands to be looked up for more help.

2009-11-29  Zachary T Welch <zw@superlucidity.net>

	* : improve command_done() API and docs command_done() does not need to return an error, but it needed
	Doxygen comment.  Provide some for copy_command_context as well.  Note: this audit revealed some potential bugs with the command
	context implementation.  There was a reason that commands were added
	at the end of the list.  Shallow copying of command_context means
	that the list is shared between them.  And commands added at the
	top-level before the pre-existing commands will not be available in
	the shared context as they were before.  Yikes! Fortunately, this does not seem to occur in general use, as
	'add_help_text' gets registered in startup.tcl and claims the first
	slot in my own test cases.  Thus, it seems that we have been masking
	the issue for now, but it shows the need for further architectural
	improvement in the core command module.

2009-11-29  Zachary T Welch <zw@superlucidity.net>

	* : allow deferal of init Adds 'noinit' command to prevent OpenOCD from running 'init' at the
	end up startup, allowing it to be given from telnet or TCL.  This
	provides the old behavior by default, and users can add this command
	to their scripts to get the new behavior.

2009-11-28  Zachary T Welch <zw@superlucidity.net>

	* : improve gdb_init() sequence Rework gdb_init to create flexible APIs (gdb_target_add_{one,all})
	and static helper (gdb_target_start) for starting GDB services.
	Eliminates duplicated code and provides general mechanisms for
	adding GDB services.  The 'init' command is updated to call the new
	API, and later patches can decouple its policy of adding all targets
	therein.  Provides the new capability to use both piped and TCP servers when
	multiple targets are defined.  The first target fills the pipe, and
	others will be started on TCP ports (unless disabled, i.e.
	gdb_port=0).

2009-11-29  David Brownell <dbrownell@users.sourceforge.net>

	* : XScale: clean up full_context() (#2) Streamline the loop by continuing as soon as we know there's no work
	to be done; this lets us un-indent almost everything.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-29  David Brownell <dbrownell@users.sourceforge.net>

	* : XScale: debug entry uses new register mapping Use the new mapping interfaces in the debug entry path.  SPSR and
	the banked registers now have smaller and faster accessors ... use
	them.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-29  Marek Vasut <marek.vasut@gmail.com>

	* : XScale: initial PXA3xx support [dbrownell@users.sourceforge.net: user's guide; variant param is
	optional] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-28  David Brownell <dbrownell@users.sourceforge.net>

	* : bugfix: 'init' changes state, not main() Code other than main() may invoke "init".  When it does so,
	customized handlers may need to run ... so make sure the command
	context state is updated before they do so.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-28  David Brownell <dbrownell@users.sourceforge.net>

	* : Cortex-M3: don't chain "struct arm" commands Those commands presume support for the "classic" set of CPU modes
	(FIQ, supervisor, IRQ, etc) ... which aren't supported by the
	ARMv7-M or ARMv6-M architectures.  They also presume a "struct arm"
	base type, which this code doesn't use.  We haven't cleaned up the register handling enough to be able to
	share any of those "base" methods.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-25  Zachary T Welch <zw@superlucidity.net>

	* : add more stub handlers to testee target Prevent everything from crashing when exercising various commands.

2009-11-25  Zachary T Welch <zw@superlucidity.net>

	* : split jim_target into multiple handlers The 'target' command group was implemented using its own command
	dispatching, which can be eliminated by using the new chained
	command registration mechanism.  This patch splits the jim_target()
	function into individual handlers, which makes them to be visible to
	the help and usage commands.  These one-trick handlers are much
	easier to understand.

2009-11-26  Zachary T Welch <zw@superlucidity.net>

	* : improve jtag_tap_configure Splits bulk of the jtag_tap_configure into jtag_tap_configure_event,
	removing three or four levels of indentation in the process.  The
	resulting code was stylistically improved in other ways, but it
	should be functionally identical.

2009-11-26  Zachary T Welch <zw@superlucidity.net>

	* : begin moving JTAG jim handlers/helpers Moves the tertiary jim handlers and required static helpers to the
	top of tcl.c, defining them in a new registration array that is
	chained in both the top-level context and under the jtag command.
	The top-level commands can be removed at some point in the future to
	reduce clutter.

2009-11-28  Zachary T Welch <zw@superlucidity.net>

	* : remove redundant 'rm' command handler Two 'rm' commands were implemented and registered.  This removes the
	version that would have never been called prior to refactoring the
	command registration.

2009-11-28  Zachary T Welch <zw@superlucidity.net>

	* : include mode information in help text.  Extends the help output to list the valid modes for each commands.
	Fixes a memory leak of the returned command_name() string.

2009-11-27  Zachary T Welch <zw@superlucidity.net>

	* : add command private data setter/accessor Presently, commands registration taks a static handler data pointer.
	This patch adds support for commands that require a dynamic pointer,
	such as those registered in a dynamic context (e.g. subcommands for
	a user-created 'foo.cpu' command).  The command_set_handler_data
	will update a command (group) to use a new context pointer, while
	the CMD_DATA macro allows command handlers to access the value.  Jim
	handlers should find this value in interp->cmdPrivData.

2009-11-27  Zachary T Welch <zw@superlucidity.net>

	* : remove unknown handler Updates command registration to provide top-level handlers for all
	commands, rather than falling back onto the 'unknown' command.
	Instead, that same handler is registered for placeholders, providing
	the same functionality under the root verb command name instead.
	This permits users to implement their own 'unknown' function, and it
	resolves some mind-bending breakage related to function object
	lookup while recursing.  Changes 'ocd_bounce' to call 'ocd_command' and 'ocd_help' from the
	wrapper directly, rather than bouncing through their wrappers. This
	prevents endless recursion caused by the above changes, whereby the
	'command' wrapper's type check would blow the stack to hell and
	gone.

2009-11-27  Zachary T Welch <zw@superlucidity.net>

	* : add 'command type' introspective handler Adds the 'command' group handler, with the 'type' command producing
	a string that tells whether the given command is 'native' (for
	Jim-based command handlers), 'simple' (for simple built-in
	commands), 'group' for command group placeholders, and 'unknown' if
	not found in the command registration tables (e.g. core built-ins
	functions).

2009-11-28  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM11: fix dbgtap JTAG_DEBUG There is no DEBUG() macro; don't call one!  Always at least *parse*
	debug code, to help prevent such errors.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-28  David Brownell <dbrownell@users.sourceforge.net>

	* : target: remove unused TARGET_EVENT_OLD_* symbols Just two *_OLD_* symbols left...  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-27  David Brownell <dbrownell@users.sourceforge.net>

	* : omap3530.cfg: use new "reset-assert" event Replaces previous "reset-assert-pre" workaround.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-27  David Brownell <dbrownell@users.sourceforge.net>

	* : target: groundwork for "reset-assert" event This defines a "reset-assert" event and a supporting utility
	routine, and documents both how targets should implement it and how
	config scripts should use it.  Core-specific updates are needed to
	make this work.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-27  Zachary T Welch <zw@superlucidity.net>

	* : fix regression causing duplicated output The command refactoring caused subcommand handlers to produce
	duplicate output when run.  The problem was introduced by failing to
	ensure all such invocations went through a top-level "catcher"
	script, prefixing the command name with the 'ocd_' prefix and
	consuming its results.  The fix is to ensure such a top-level "catcher" script gets created
	for each top-level command, regardless of whether it has a handler.
	Indeed, this patch removes all command registrations for
	sub-commands, which would not have worked in the new registration
	scheme anyway.  For now, dispatch of subcommands continues to be handled by the new
	'unknown' command handler, which gets fixed here to strip the 'ocd_'
	prefix if searching for the top-level command name fails initially.
	Some Jim commands may be registered with this prefix, and that
	situation seems to require the current fallback approach.
	Otherwise, that prefix could be stripped unconditionally and the
	logic made a little simpler.  The same problem must be handled by
	the 'help' command handler too, so its lookup process works as
	intended.  Overall, the command dispatching remains more complicated than
	desired, but this patch fixes the immediate regressions.

2009-11-27  Zachary T Welch <zw@superlucidity.net>

	* : update minidummy interface driver command handling Changes the interface definition field reference from
	register_commands to commands, which allows the module to compile.

2009-11-27  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: keep up with changes to log_init() fn's and return value for log_init() changed to void.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-16  Dean Glazeski <dnglaze@gmail.com>

	* : ARM NAND I/O header documentation update.  Fixed the header file to properly specify the doxygen documentation
	for the items defined in it.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-16  Dean Glazeski <dnglaze@gmail.com>

	* : ARM NAND I/O refactor code copying.  Created a function for copying code to the working area on a target.
	The NAND write and read functions are updated to include use of this
	function.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-17  Dean Glazeski <dnglaze@gmail.com>

	* : NAND Flash documentation update.  Updated doxygen comments for different interface structures for the
	NAND interface.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-24  Uwe Hermann <uwe@hermann-uwe.de>

	* : update bug reporting information The Berlios bug-tracker is disabled, bug reports go to the list.  Signed-off-by: Zachary T Welch <zw@superlucidity.net>

2009-11-24  Uwe Hermann <uwe@hermann-uwe.de>

	* : fix typos in source files Correct some spelling errors in source comments and printed output.  Signed-off-by: Zachary T Welch <zw@superlucidity.net>

2009-11-26  Eric Wetzel <thewetzel@gmail.com>

	* : fix 'flash protect' and 'flash erase_sector' Command upgrading introduced two off-by-one bugs in the flash
	commands.  This patch fixes the 'flash {protect,erase_sector}'
	commands to check that they have been passed the correct number of
	arguments.  Ammended during commit to fix help text for 'erase_address' too.

2009-11-25  David Brownell <dbrownell@users.sourceforge.net>

	* : target: target_get_name() --> target_type_name() There are two names that may matter on a per-target basis.  One is a
	per-instance name (for example, "at91sam7s.cpu").  The other is the
	name of its type (for example, "arm7tdmi"), which is shared among
	multiple targets.  Currently target_get_name() returns the type name, which is
	misleading and is rarely appropriate for target diagnostics.  Rename
	that as target_type_name().  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-25  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: minor armv4/armv5 cleanup Lines of 300+ characters are still bad; debug tweaks.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-25  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM7/9: shrink run_algorithm_inner() lines 300+ characters is unreasonable.  So is half that.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-20  Zachary T Welch <zw@superlucidity.net>

	* : update NEWS with recent developments Mention changes to flash bank command syntax, 'nand verify' command,
	command error handling and reporting, and help/usage command
	upgrades.

2009-11-23  Zachary T Welch <zw@superlucidity.net>

	* : support OPENOCD_DEBUG_LEVEL environment setting Detect the OPENOCD_DEBUG_LEVEL setting in log_init(), allowing the
	very early startup phases to be debugged.

2009-11-24  Zachary T Welch <zw@superlucidity.net>

	* : update command handler documentation Adds sections on command registration and chaining, giving an
	overview to developers that want to use these features.

2009-11-21  Zachary T Welch <zw@superlucidity.net>

	* : improve command handling examples Removes hello and foo commands from top-level registration.
	Instead, the dummy interface driver and faux flash driver have been
	augmented to register these commands as sub-commands.

2009-11-24  Zachary T Welch <zw@superlucidity.net>

	* : encapsulate and re-use log capture, retval setup Factors log capture while running script commands, eliminating
	duplicated code between script_command and jim_capture.  Factors
	setting a command's Jim "retval" into a new helper as well.  Using these new helpers in the new unknown command handler's fixes
	possible regressions caused by these bits being missing.

2009-11-23  Zachary T Welch <zw@superlucidity.net>

	* : improve usage and help command output Rewrite formatting code in C, removing last remenants of TCL help
	code.  Sinificantly improves the readability by using smarter indent
	and wrap.

2009-11-24  Zachary T Welch <zw@superlucidity.net>

	* : httpd: use register_commands() Updates httpd_start() to use register_commands() for 'readform' and
	'writeform' commands.  Adds server/httpd.h to export the new
	signatures for this function (and httpd_stop), which allows removing
	the obsoleted declarations inside openocd.c.

2009-11-23  Zachary T Welch <zw@superlucidity.net>

	* : refactor command_new to use command_registration Save stack space: use a struct.  Makes it easier to add new
	parameters.

2009-11-23  Zachary T Welch <zw@superlucidity.net>

	* : remove target_type register_command callback Uses chaining of command_registration structures to eliminate all
	target_type register_callback routines.  Exports the command_handler
	registration arrays for those target types that are used by others.

2009-11-23  Zachary T Welch <zw@superlucidity.net>

	* : trace: use register_commands()

2009-11-23  Zachary T Welch <zw@superlucidity.net>

	* : target: use register_commands()

2009-11-23  Zachary T Welch <zw@superlucidity.net>

	* : etm_dummy: use register_commands()

2009-11-23  Zachary T Welch <zw@superlucidity.net>

	* : etb: use register_commands()

2009-11-23  Zachary T Welch <zw@superlucidity.net>

	* : cortex_a8: use register_commands()

2009-11-23  Zachary T Welch <zw@superlucidity.net>

	* : armv7a: use register_commands()

2009-11-23  Zachary T Welch <zw@superlucidity.net>

	* : arm9tdmi: use register_commands()

2009-11-23  Zachary T Welch <zw@superlucidity.net>

	* : arm926ejs: use register_commands()

2009-11-23  Zachary T Welch <zw@superlucidity.net>

	* : arm7_9_common: use register_commands()

2009-11-23  Zachary T Welch <zw@superlucidity.net>

	* : arm11: use register_commands()

2009-11-22  Zachary T Welch <zw@superlucidity.net>

	* : remove flash_driver->register_callbacks Replace flash_driver callback with pointer to command_registration.
	Eliminates all related routines and allows drivers to omit commands.

2009-11-22  Zachary T Welch <zw@superlucidity.net>

	* : str9xpec: use register_commands()

2009-11-22  Zachary T Welch <zw@superlucidity.net>

	* : str7x: use register_commands()

2009-11-22  Zachary T Welch <zw@superlucidity.net>

	* : stellaris: use register_commands()

2009-11-22  Zachary T Welch <zw@superlucidity.net>

	* : nand: use register_commands() Eliminates 'nand_cmd' global variable.

2009-11-22  Zachary T Welch <zw@superlucidity.net>

	* : lpc3180_nand_controller: use register_commands()

2009-11-22  Zachary T Welch <zw@superlucidity.net>

	* : lpc2000: use register_commands()

2009-11-22  Zachary T Welch <zw@superlucidity.net>

	* : ecos: use register_commands()

2009-11-22  Zachary T Welch <zw@superlucidity.net>

	* : avrf: use register_commands()

2009-11-22  Zachary T Welch <zw@superlucidity.net>

	* : at91sam3: use register_commands()

2009-11-20  Zachary T Welch <zw@superlucidity.net>

	* : vsllink: use register_commands() Use register_commands() with command registration array.

2009-11-20  Zachary T Welch <zw@superlucidity.net>

	* : presto: use register_commands() Use register_commands() with command registration array.

2009-11-20  Zachary T Welch <zw@superlucidity.net>

	* : jlink: use register_commands() Use register_commands() with command registration array.

2009-11-20  Zachary T Welch <zw@superlucidity.net>

	* : ft2232: use register_commands() Use register_commands() with a command registration array.

2009-11-20  Zachary T Welch <zw@superlucidity.net>

	* : arm-jtag-ew: use register_commands() Uses register_commands() with command registration array.

2009-11-23  Zachary T Welch <zw@superlucidity.net>

	* : pld: use static registration instead of callback Remove register_callbacks from pld_device structure, using an array
	of command_registration records instead.

2009-11-22  Zachary T Welch <zw@superlucidity.net>

	* : {,x}svf: use register_commands() Use register_commands() for registering {,x}svf commands.

2009-11-20  Zachary T Welch <zw@superlucidity.net>

	* : log: use register_commands() Use register_commands() for logging callbacks.  Improve help and add
	proper usage.

2009-11-20  Zachary T Welch <zw@superlucidity.net>

	* : openocd: use register_commands() Use register_commands() for top-level version and init command.

2009-11-21  Zachary T Welch <zw@superlucidity.net>

	* : hello: use register_commands() Use new register_commands() with command registration table.

2009-11-22  Zachary T Welch <zw@superlucidity.net>

	* : add public API for locating commands Allow other modules to find a command, primarily for the purpose of
	registering and unregistering subcommands.

2009-11-21  Zachary T Welch <zw@superlucidity.net>

	* : add command registration chaining Adds the ability to chain registration structures.  Modules can
	define a command with the 'chain' and 'num_chain' fields defined in
	their registration table, and the register_commands() function will
	initialize these commands.  If the registration record creates a new
	command, then the chained commands are created under it; otherwise,
	they are created in the same context as the other commands (i.e. the
	parent argument).

2009-11-20  Zachary T Welch <zw@superlucidity.net>

	* : command: use register_commands for handlers Use register_commands() to register low-level command handlers,
	adding a builtin_command_handlers declaration that is easy to
	understand.  Splits help and usage information into their
	appropriate fields.

2009-11-20  Zachary T Welch <zw@superlucidity.net>

	* : add register_commands for batch registration The register_commands API takes multiple commands in one call,
	allowing modules to declare and pass a much simpler (and more
	explicit) array of command_registration records.

2009-11-20  Zachary T Welch <zw@superlucidity.net>

	* : use COMMAND_REGISTER macro Replaces direct calls to register_command() with a macro, to allow
	its parameters to be changed and callers updated in phases.

2009-11-21  Zachary T Welch <zw@superlucidity.net>

	* : improve startup tcl scripts Fix a couple of layering violations missed in the last round.  Add
	missing comment headers.

2009-11-24  David Brownell <dbrownell@users.sourceforge.net>

	* : Cortex-A8: hook up DPM This replaces two versions of register access functions.  One was
	commented out, and seemed to have uncertain intent.  The other was
	fairly new, and helped motivate the DPM framework once I observed
	that the ARM11 was doing the very same ops.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-24  David Brownell <dbrownell@users.sourceforge.net>

	* : Cortex-A8: minor cleanup Make various functions static, add some comments, report vector
	catch as a flavor of DBG_REASON_BREAKPOINT, get rid of
	needless/undesirable ARMV4_5_CORE_REG_MODE, etc.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-24  Zachary T Welch <zw@superlucidity.net>

	* : fix doxygen build Update build rules to skip the PDF unless the TeX has been created.
	Also, fixes a warning regarding pattern rules being a GNU make
	trick.

2009-11-19  Zachary T Welch <zw@superlucidity.net>

	* : jlink: remove superfluous indentation Rewrite logic to remove indentation in jlink_usb_open, in prep for
	further surgery.

2009-11-19  Zachary T Welch <zw@superlucidity.net>

	* : rlink: eliminate spurious indentation Rework rlink_init to use less indentation.  Best viewed with diff
	-w.

2009-11-19  Zachary T Welch <zw@superlucidity.net>

	* : usbprog: use jtag_usb_open Rewrite usbprob_jtag_open to use jtag_usb_open helper.

2009-11-19  Zachary T Welch <zw@superlucidity.net>

	* : add jtag/usb_common.[ch] files Begins to consolidate code used by several USB JTAG interfaces.
	This first patch provides the required build system changes and a
	common jtag_usb_open routine, which will replace the guts for
	probing the busses and devices for possible VID/PID matches.  The
	following patches convert each driver to use it.

2009-11-24  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM11: use standard run_algorithm() As with single stepping, the previous stuff was needed because the
	ARM11 code wasn't using the standard ARM base type and register
	access ... but now those mechanisms work, so we can switch out that
	special-purpose glue, in favor of the more thoroughly tested/capable
	"standard" code.  Fixes a bug in the resume() implementation:  it wasn't handling two
	of its arguments correctly, preventing the "flash erase_check"
	algorithm from working.  (This code needs a *subsequent* update for
	correct register handling, though... removing the confusion about
	which "r2", for example, to use.) This should resolve some "FIXME" comments too, for Thumb and
	processor mode support.  It also gets rid of a nasty exit() call;
	servers should only have *clean* shutdown paths.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-24  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM11: partial support for standard ARM register interfaces.  This provides "standard" ARM register support -- with twenty or more
	shadow registers on top of what this code now handles, but properly
	associated with the various core modes -- parallel to the current
	register code.  That is, the current code is stilil managing the
	"current" registers; the new code shadows them.  You can see all the registers with "arm reg", modify the shadows
	like "r8_fiq" or "sp_abt" with "reg", and see them get properly
	written back when you step.  (Just don't do that with any of the
	registers managed by the "old" code ...) It also switches to using more standard code, relying on those
	standard registers, in two places:  (a) the poll status display,
	which now shows core state (ARM/Thumb/...) and mode (Supervisor,
	IRQ, etc); and (b) GDB register access.  So it's not a full migration, there are warts -- every place that
	touches the old register cache is a potential bug -- but it's a
	small more-or-less-comprehensible step that's even somewhat useful.
	Later patches complete the migration.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-24  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM11: implement provider for new DPM interface This is a very thin layer over some of the current ARM11 debug TAP
	utilities.  The layer isn't yet hooked up.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-24  David Brownell <dbrownell@users.sourceforge.net>

	* : target: cope with *any* error setting a breakpoint It's wrong to map unrecognized failure codes to success.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-23  Jerry Ling <jerry_ling@draytek.com>

	* : mips: fix gaffe when removing dynamic array allocation Classic sizeof() gaffe.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-10-26  yvind Harboe <oyvind.harboe@zylin.com>

	* : arm926ejs: retire cp15 commands, handled by mrc/mcr.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-22  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM11: macro cleanup Make this code look more like the rest of the OpenOCD code.   - Use calloc() directly, not NEW() ... and fix some potential    memory leaks while we're at it.   - Remove FNC_INFO ... it's a NOP that just clutters things,    and it's trivial for developers to add tracing as needed.   - Replace FNC_INFO_NOTIMPLEMENTED with LOG_WARNING calls;    ditto.  And stop having those call sites wrongly succeed!  - Waste less space with the CHECK_RETVAL() macro.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-22  yvind Harboe <oyvind.harboe@zylin.com>

	* : mips: use const for code sequences This will allow data to be allocated in read only memory instead of
	on the stack. Speeds things up and reduces stack usage.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-22  yvind Harboe <oyvind.harboe@zylin.com>

	* : arm926ejs: fix warnings buf_set_u32() operated on an uninitialized stack variable with
	non-byte boundaries, which led to warnings about reading
	uninitialized stack.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-22  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: use arm_reg_current() Start using the arm_reg_current() call.  This shrinks and speeds the
	affected code.  It can also prevent some coredumps coming from
	invalid CPSR values ... the ARMV4_5_CORE_REG_MODE() macro returns
	bogus registers if e.g. "Secure Monitor" mode isn't supported by the
	current CPU.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-22  David Brownell <dbrownell@users.sourceforge.net>

	* : target: make register flags "bool" Mostly for clarity, but it also saves code and data space.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-22  yvind Harboe <oyvind.harboe@zylin.com>

	* : flash: dynamically allocate working storage Allocate working memory rather than using stack.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-22  yvind Harboe <oyvind.harboe@zylin.com>

	* : todo: add tip on how to identify excessive stack usage Use dynamic allocations for working memory rather than stack.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : embedded: reduce stack usage Allocate working structures on stack to avoid issues with path
	lengths + reduce stack usage.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : embedded: save stack and also do not recaluate the crc32_table upon every invocation.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-22  yvind Harboe <oyvind.harboe@zylin.com>

	* : build: fix breakage in building bin2char bin2char build relied on $(builddir) which is not defined for
	arm-elf X builds at least.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-22  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: define two register utilities Define arm_reg_current() ... returning handle to a given register,
	and encapsulating the current mode's register shadowing.  It's got
	one current use, for reporting the current register set to GDB.
	This will let later patches clean up much ARMV4_5_CORE_REG_MODE()
	nastiness, saving a bit of code.  Define and use arm_set_cpsr() ... initially it updates the cached
	CPSR and sets up state used by arm_reg_current(), plus any SPSR
	handle.   (Later: can also set up for T and J bits.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-22  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM11: remove disabled register hooks Minor cleanup of ARM11 register handling:  remove disabled register
	hooks.  This should all be handled by shared code, and this stuff is
	just clutter.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-21  Zachary T Welch <zw@superlucidity.net>

	* : allow jtag interfaces to lack commands Allow JTAG interface drivers to skip registering an
	register_commands callback when it will just be empty.

2009-11-20  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: pass 'struct reg *' to register r/w routines Implementations need to access the register struct they modify; make
	it easier and less error-prone to identify the instance.  (This
	removes over 10% of the ARMV4_5_CORE_REG_MODE nastiness...) Plus some minor fixes noted when making these updates:  ARM7/ARM9
	accessor methods should be static; don't leave CPSR wrongly marked
	"dirty"; note significant XScale omissions in register handling; and
	have armv4_5_build_reg_cache() record its result.  Rename "struct armv4_5_core_reg" as "struct arm_reg"; it's used for
	more than those older architecture generations.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-20  Zachary T Welch <zw@superlucidity.net>

	* : maintain command lists in sorted order Use insertion sort to the command link lists.  The only practical
	effect of this is to order the output of the new 'help' command.

2009-11-20  Zachary T Welch <zw@superlucidity.net>

	* : provide command context during cmd_init For the startup.tcl code to use built-in commands, the context must
	be associated with the interpreter temporarily.  This will be
	required to add help text.

2009-11-19  Zachary T Welch <zw@superlucidity.net>

	* : factor help script command into parts Creates a helper function, cmd_help, which displays the help string
	for a single command.  Presently, it is called from the loop in
	help.  The routine has been extended to allow indentation of command
	groups, so an improved help command can improve the display of
	information.

2009-11-19  Zachary T Welch <zw@superlucidity.net>

	* : change command_find helper interface Avoid requiring double pointers where a single would suffice.

2009-11-20  David Brownell <dbrownell@users.sourceforge.net>

	* : target.cfg: TAP id for Hilscher netX 500 Based on email from "Martin Kaul <martin.kaul@leuze.de>".  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-19  David Brownell <dbrownell@users.sourceforge.net>

	* : Cortex-A8: better context restore The previous version never wrote dirty registers for non-current CPU
	modes ... fix that.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-19  David Brownell <dbrownell@users.sourceforge.net>

	* : target: create/use register_cache_invalidate() Create a generic register_cache_invalidate(), and use it to replace
	three all-but-identical core-specific routines:  - armv4_5_invalidate_core_regs()  - armv7m_invalidate_core_regs  - mips32_invalidate_core_regs() too.  Make cache->num_regs be unsigned, avoiding various errors.  Net code shrink and simplification.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-18  Zachary T Welch <zw@superlucidity.net>

	* : document new flash syntax Updates the user documentation with the new syntax for defining
	flash and nand banks.

2009-11-17  Zachary T Welch <zw@superlucidity.net>

	* : add support for naming NAND banks Requires users to name their nand banks, allowing them to be used
	instead of bank numbers in script commands.

2009-11-18  Zachary T Welch <zw@superlucidity.net>

	* : update 'flash bank' usage in scripts Sets $_FLASHNAME to "$_CHIPNAME.flash" and passes it as the first
	argument to 'flash bank'.

2009-11-17  Zachary T Welch <zw@superlucidity.net>

	* : refactor handle_flash_bank_command Move variables to point of first use, reducing their scope.  Add
	driver_name temporary to help arguments be changed later.  Eliminates the useless 'found' variable, changing the code to
	terminate the loop immediate and return its success.

2009-11-17  Zachary T Welch <zw@superlucidity.net>

	* : allow flash/nand banks commands to accept names Add get_flash_bank_by_name (and get_nand_device_by_name) helpers to
	retrieves struct flash_bank * (struct nand_device *) given a driver
	name and an (optional) driver-specific bank index.  These are used to extend flash_command_get_bank_by_num (and
	nand_command_get_device_by_num) to allow all flash (nand) commands
	to reference defined banks by name, not just by number.  To avoid some code duplication, add the flash/common.[ch] files to
	hold functionality common to both types driver.  The first two
	methods are helpers for the above routines to find a bank specified
	by a "name" or "name.index" string.  get_flash_name_index() finds
	the '.index' portion, while flash_driver_name_matches() performs the
	string portion matching.

2009-11-19  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: streamline register init Combine register names with other per-register data into a single
	template structure.  This saves space, and makes it easier to change
	how registers get handled (by shrinking the number of places that
	care about cache indices).  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-18  Dean Glazeski <dnglaze@gmail.com>

	* : nand_fileio_parse_args parses wrong param for size This changes the size parameter from argv[2] to argv[3], which is
	what it's supposed to be.  Signed-off-by: Zachary T Welch <zw@superlucidity.net>

2009-11-19  David Brownell <dbrownell@users.sourceforge.net>

	* : ARMv7-A: use standard ARM core_mode symbols The only way ARMv7-A modes differ from ARMv4/ARMv5 flavors is that
	v7-A is allowed to include "Secure monitor" support.  That's now
	handled by our standard top-level ARM code ... so phase out the
	stuff that's specific to ARMv7-A.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-18  Zachary T Welch <zw@superlucidity.net>

	* : remove fast command and jim_global_long Removing the fast command eliminates the fast_and_dangerous global,
	which was used only by arm7_9_common as an initializer.  The command
	is not called in the tree; instead, more explicit commands are used.  The jim_global_long function was not used anywhere in the tree.

2009-11-18  Zachary T Welch <zw@superlucidity.net>

	* : change all bool parsers to accept any value This patch changes the behavior of all boolean parsing callers to
	accept any one of "true/enable/on/yes/1" or
	"false/disable/off/no/0".  Since one particular pair will be most appropriate in any given
	situation, the specific macros should continue to be used in order
	to display the most informative error messages possible.

2009-11-18  Zachary T Welch <zw@superlucidity.net>

	* : use COMMAND_PARSE_ENABLE macro where appropriate Updates all command parsing of simple "enable" and "disable"
	arguments.  A few case in the tree use a tri-state or extended
	arguments, which cannot use this simple macro.  Simlifies the xscale icache/dcache command handler logic.

2009-11-18  Zachary T Welch <zw@superlucidity.net>

	* : add COMMAND_PARSE_BOOL macro and friends Adds several macros similar to COMMAND_PARSE_NUMBER, but for parsing
	boolean command arguments.  Two flavors are provided to provide
	drop-in compatibility with existing code, allow for the elimination
	of a lot of code bloat while improving the error checking and
	reporting.  COMMAND_PARSE_ON_OFF parses "on"/"off" command parameters.
	COMMAND_PARSE_ENABLE parses "enable"/"disable" command parameters.  Both print the error and return an error out of the calling
	function.

2009-11-18  David Brownell <dbrownell@users.sourceforge.net>

	* : Cortex-A8: xPSR handling updates When we read the CPSR on debug entry, update the CPSR cache in all
	cases, not just when the current processor state is User or System.  Plus minor cleanup of how the (too-many) other registers' cache
	entries get updated.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-18  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: simplify ARMv7-A register handling ARMv7-A doesn't need to duplicate all the standard ARM code for
	register handling.   - Switch Cortex-A8 to use the standard register code  - Remove duplicated infrastructure from ARMv7-A  - Have ARMv7-A arch_state() show CPSR, like other ARMs Add comments to show where the Cortex-A8 isn't actually doing the
	right thing for register reads/writes, unless core happens to be in
	the right mode to start with.  (Looks like maybe there may be
	generic confusion between saved/current PSR values in all the ARM
	code ...) Make related ARMv7-A and Cortex-A8 symbols properly static.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-18  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: add "core_type" field to "struct arm" It's used to flag cores with the "TrustZone" extension, and is used
	in subsequent patches to set up support for the registers shadowed
	by its new secure monitor mode.  The ARM1176 and Cortex-A8 both support this new mode.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-17  Zachary T Welch <zw@superlucidity.net>

	* : pass startup_tcl to command_init Removes external linkage from helper module, making the startup code
	a parameter to a new command context's initialization routine.

2009-11-17  Zachary T Welch <zw@superlucidity.net>

	* : move startup.c to libopenocd Moves the creation of startup_tcl.c from src/helper/ to src/.
	Prepares to split the startup.tcl file into its per-module parts.

2009-11-17  yvind Harboe <oyvind.harboe@zylin.com>

	* : jtag-api: get rid of unecessary buf_set_u23() that make code
	obtuse.  Also, this is on the path to increasing the word size for bit
	vectors from 8 to something wider(32? natural host machine width?) Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-17  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: add arm_mode_name() Add and use arm_mode_name() to map from PSR bits to user meaningful
	names.   It uses a new table which, later, can be used to hold other
	mode-coupled data.  Add definitions for the "Secure Monitor" mode, as seen on some ARM11
	cores (like ARM1176) and on Cortex-A8.  The previous mode name
	scheme didn't understand that mode.  Remove the old mechanism ... there were two copies, caused by
	Cortex-A8 needing to add "Secure Monitor" mode support.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-17  Zachary T Welch <zw@superlucidity.net>

	* : allow documentation to be configured Add --disable-doxygen-html and --enable-doxygen-pdf options to the
	configure script, allowing user to change the defaults.  These
	update the proess of munging the Doxygen configuration file to use
	the settings thusly provided.  Add options in README.

2009-11-17  Zachary T Welch <zw@superlucidity.net>

	* : update command_handler documentation Improve the developer manual and primer sections which talk about
	writing command handlers.  Notably, it documents the new CMD_*
	macros.

2009-11-16  Zachary T Welch <zw@superlucidity.net>

	* : add CMD_NAME variable in command_invocation Update CMD_NAME from its migratory home in CMD_ARGV[-1] to
	cmd->name.  Allows CMD_ARGV++ idiom to be used safely in command
	handlers.

2009-11-15  Zachary T Welch <zw@superlucidity.net>

	* : command_handler: change 'cmd_ctx' to CMD_CTX Convert all command handler 'cmd_ctx' parameter usage with CMD_CTX.

2009-11-15  Zachary T Welch <zw@superlucidity.net>

	* : command_handler: change to 'argc' to CMD_ARGC This patch converts all instances of 'argc' in COMMAND_HANDLER
	routines to use CMD_ARGC.

2009-11-17  David Brownell <dbrownell@users.sourceforge.net>

	* : target: simplify register get/set ops No need to indirect from registered integers to pointers.  Just
	stash the pointers directly in the register struct, and don't even
	bother registering.  This is a small code shrink, speeds register access just a smidgeon,
	and gets rid of another rude exit() path.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-17  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: revC UART forwarding Name of serial device differs between revB/C.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-12  yvind Harboe <oyvind.harboe@zylin.com>

	* : zy1000: fix bug when running on non-arm CPU Shifting by more than 32 is undefined for 32 bit integers according
	to the C standard. Robust solution is conditional code.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-17  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM9TDMI: remove now-needless "struct arm9tdmi" And move the rest of the vector_catch stuff into the C file; it's
	not part of the module interface.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-17  David Brownell <dbrownell@users.sourceforge.net>

	* : target: remove some more duplicate includes Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-16  David Brownell <dbrownell@users.sourceforge.net>

	* : Cortex-A8: no exit() calls, add missing v7-A init Eventually there should be a v7a init routine, but for now all that
	is inlined here.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-16  David Brownell <dbrownell@users.sourceforge.net>

	* : MIPS: no exit() calls Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-16  David Brownell <dbrownell@users.sourceforge.net>

	* : ARMv4/ARMv5: no exit() calls Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-16  David Brownell <dbrownell@users.sourceforge.net>

	* : Cortex-M3: don't exit() Get rid of undesirable and needless exit() calls from the Cortex-M3
	support.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-16  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM11: register (most) standard ARM commands Have ARM11 register the "standard" ARM commands.  For now, only
	disassembly really works.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-16  David Brownell <dbrownell@users.sourceforge.net>

	* : JTAG: fix autoprobe failure.  Fix bug noted by Øyvind: terminate the IR length autoscan when the
	IR is too long, or otherwise broken.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : struct fileio: improve member types Add const keyword to file url and cast to free().  Make size an ssize_t and chase all format strings that use it.

2009-11-15  Zachary T Welch <zw@superlucidity.net>

	* : use Jim_CmdProc in jim_register The jim_register command just needed to use the type defined by
	jim.h.

2009-11-15  Zachary T Welch <zw@superlucidity.net>

	* : make command line options const The getopt_long call allows a const struct option, so mark ours
	const too.

2009-11-16  David Brownell <dbrownell@users.sourceforge.net>

	* : target: don't include "log.h" from "armv4_5.h" No point in multiple includes, and that file doesn't use its
	functions any more.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-16  David Brownell <dbrownell@users.sourceforge.net>

	* : JTAG: no LOG_WARNING() for taps without IDCODE Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-16  David Brownell <dbrownell@users.sourceforge.net>

	* : "types.h" doxygen fix Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-16  Zachary T Welch <zw@superlucidity.net>

	* : move ARRAY_SIZE macro to types.h The ARRAY_SIZE macro was defined in several target files, so move it
	to types.h.  This patch also removes two other identical macros: DIM (from
	jtag.h) and asizeof (from arm11.h).

2009-11-16  Zachary T Welch <zw@superlucidity.net>

	* : remove TAP_SCAN_BYTES macro Use DIV_ROUND_UP(n, 8) instead of TAP_SCAN_BYTES macro.

2009-11-16  Zachary T Welch <zw@superlucidity.net>

	* : move container_of to types.h The container_of macro is useful as a general solution.  It belongs
	in types.h, rather than target.h where it was introduced.  Requires
	the offsetof macro, which comes from <stddef.h> (moved as well).

2009-11-15  Zachary T Welch <zw@superlucidity.net>

	* : flash_command_get_bank_by_num: make COMMAND_HELPER Use COMMAND_HELPER macro to declare flash_command_get_bank_by_num.
	This is required for COMMAND_PARSE_NUMBER macro.

2009-11-07  Zachary T Welch <zw@superlucidity.net>

	* : Add 'nand verify' command Add the 'nand verify' command to perform a dump and fake-write
	simultaneously, checking the read bits against those generated by
	the write process.  Appropriate user documentation for this command
	has been added to the user guide as well.  The algorithm presently makes a relatively naive comparison.  Some
	chips that use ECC may not verify correctly using this
	implementation, but the new documentation provides details about
	this limitation.

2009-11-05  Zachary T Welch <zw@superlucidity.net>

	* : Use nand_fileio_* in write/dump commands.  This patch eliminates duplicated code in the the NAND 'dump' and
	'write' by using the new static helper functions.  These changes also fix a possible memory leak in nand dump command,
	in the case that the dump file failed to open.  Overall, the changes should be functionally equivalent, but the
	resulting code will be easier to improve and extend further.

2009-11-16  Zachary T Welch <zw@superlucidity.net>

	* : binarybuffer: add API documentation Adds Doxygen documentation for a number of the binarybuffer APIs,
	including "unexpected" behavior exposed during review on the list.

2009-11-14  Zachary T Welch <zw@superlucidity.net>

	* : improve buf_set_buf helper Use void * and unsigned types for buffer and their sizes.  Allows it
	to be used with more than uint8_t * without casts.

2009-11-14  Zachary T Welch <zw@superlucidity.net>

	* : improve buf_cpy helper Use memcpy for bulk of copy, improve final byte handling.  Improve
	types by using void * for buffers and unsigned for size.

2009-11-14  Zachary T Welch <zw@superlucidity.net>

	* : improve str_to_buf and buf_to_str helpers Improve types: use void * and unsigned.  Move all variables to point
	of first use.  Move radix guessing logic to new str_radix_guess
	helper.

2009-11-14  Zachary T Welch <zw@superlucidity.net>

	* : binarybuffer: fix whitespace related issues Add inter-operator whitespace.  Improve existing documentation.

2009-11-16  David Brownell <dbrownell@users.sourceforge.net>

	* : target: no implicit #includes of "register.h" Same deal:  "register.h" got needlessly included all over the place
	because of being in a few widely included headers.  So take it out of the header files which included it, and put it in
	files which use it ... reduce needless interdependencies.  Also, don't need that extra "types.h" inclusion.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-16  David Brownell <dbrownell@users.sourceforge.net>

	* : target: don't implicitly include "algorithm.h" Most files in the tree seem to have ended up including this, and
	*quite* needlessly ... only code implementing or using downloadable
	algorithms actually needs these declarations.  So take it out of the header files which included it, and put it in
	files which use it ... reduce needless interdependencies.  Also: "algorithm.h" doesn't need to include "types.h" again; it
	already comes from a different header.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-15  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM11: use now-generic memory utils Now the ARM11 cores can use the renamed arm_checksum_memory() and
	arm_blank_check_memory() routines ... do so.  Sanity checked with "flash erase_check" of both NOR banks on an
	OMAP2420 ... the algorithm code dumped four lines of of "poll"
	status after each of almost 520 blocks (yes, *very* annoying) but
	gave plausible results after producing that spam.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-15  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: memory utils aren't ARM7/ARM9 dependent The arm7_9_checksum_memory() and arm7_9_blank_check_memory()
	routines are not actually specific to the ARM7 and ARM9 core
	generations ... they can work for any core which can run algorithms
	using basic ARM (not Thumb) instructions.  Rename them; move the declarations to a more generic site; likewise
	move the code (and tidy it a bit in the process).  NOTE:  the blank_check() method falsely returned a success status
	(0) on one error path, when the algorithm failed.  Fixed this bug.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-15  Zachary T Welch <zw@superlucidity.net>

	* : arm-jtag-ew,jlink: switch to COMMAND_HANDLER These drivers were overlooked during the recent upgrade.  Convert
	them, moving their registration routines to eliminate their
	declarations.

2009-11-14  Zachary T Welch <zw@superlucidity.net>

	* : remove unused arm_jtag_buf_to_* helpers Removes unused arm_jtag_buf_* helpers from arm_jtag.[ch].  These
	could reappear if patches are provided to conver the tree to use
	them, but this code should not be in the master tree until that
	series is ready.

2009-11-14  Zachary T Welch <zw@superlucidity.net>

	* : struct scan_field_s -> struct scan_field Remove obsolete suffix from struct scan_field.  Somehow, these
	definitions did not get updated but did not cause any errors.

2009-11-14  David Brownell <dbrownell@users.sourceforge.net>

	* : lpc2900.h -- remove from Makefile.am too Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-14  David Brownell <dbrownell@users.sourceforge.net>

	* : remove annoying $URL$ startup message It's completely unused; the obnoxious "DANGER!!!" comments don't
	even explain what it was doing (shorthand SVN magic).  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-14  Zachary T Welch <zw@superlucidity.net>

	* : add openocd.h for top-level declarations Create src/openocd.h to hold declarations previously made internally
	by src/main.c and src/server/server.c.  This ensures all functions
	are verified to be in-sync at compile time (rather than at link),
	making it easier to track down bugs.

2009-11-13  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM11: ETM + ETB support Kick in ETM (and ETB) support for ARM11.  Tested on OMAP 2420, so
	update that configuration.  (That's an ARM1136ejs, ETB, OpenGL
	ES1.1, C55x DSP, etc.) Also update the other ARM11 ETM + ETB targets in the tree to set up
	these modules.  (Not tested.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-13  David Brownell <dbrownell@users.sourceforge.net>

	* : iMX2* + ETB targets: hook up ETM and ETB ARM9 cores with an ETB will have a matching ETM.  Hook them both up
	by default.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-13  David Brownell <dbrownell@users.sourceforge.net>

	* : ETM: simplify ETM initialization code paths Return NULL from etm_build_reg_cache() not ERROR_OK; and share code
	on that fault path.  Let ETM code handle any tracking of its cache -- not callers.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-13  David Brownell <dbrownell@users.sourceforge.net>

	* : target: remove unused "bitfield" infrastructure We have too many different registers, and too many version and
	context dependent interpretations, for this type of bitfield
	management to be scalable.  (Anyone who really wants bitfield interpretation *can* do that in
	Tcl code...) There are ... quite a few copies of the same ARM dummy registers.
	There should eventually be one copy; this many is craziness.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-13  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM7/9: rm arm7_9_get_arch_pointers() Remove the last external user of arm7_9_get_arch_pointers(), and
	that annoying downcast utility.  Add an is_arm7_9() predicate.  Stop returning specious success codes on various failure paths in
	the ARM7/ARM9 commands which used that downcast utility.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : command_t -> struct command Remove misleading typedef and redundant suffix from struct command.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : remove rlink structure typedefs Remove useless typedefs from the rlink driver.  Improve whitespace.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : nand_device_t -> struct nand_device Remove misleading typedef and redundant suffix from struct
	nand_device.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : reg_t -> struct reg Remove misleading typedef and redundant suffix from struct reg.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : improve mips32_pracc_context Use struct mips32_pracc_context instead of a typedef.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : armv4_5_common_t -> struct arm Remove misleading typedef and just use struct arm.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : etb_t -> struct etb Remove misleading typedef and redundant suffix from struct etb.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : image_elf_t -> struct image_elf Remove misleading typedef and redundant suffix from struct
	image_elf.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : cortex_m3_fp_comparator_t -> struct cortex_m3_fp_comparator Remove misleading typedef and redundant suffix from struct
	cortex_m3_fp_comparator.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : cortex_a8_brp_t -> struct cortex_a8_brp Remove misleading typedef and redundant suffix from struct
	cortex_a8_brp.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : xscale_trace_t -> struct xscale_trace Remove misleading typedef and redundant suffix from struct
	xscale_trace.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : target_event_action_t -> struct target_event_action Remove misleading typedef and redundant suffix from struct
	target_event_action.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : arm9tdmi_vector_t -> struct arm9tdmi_vector Remove misleading typedef and redundant suffix from struct
	arm9tdmi_vector.  Renames enum arm9tdmi_vector as enum arm9tdmi_vector_bit.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : xscale_common_t -> struct xscale_common Remove misleading typedef and redundant suffix from struct
	xscale_common.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : trace_point_t -> struct trace_point Remove misleading typedef and redundant suffix from struct
	trace_point.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : target_timer_callback_t -> struct target_timer_callback Remove misleading typedef and redundant suffix from struct
	target_timer_callback.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : working_area_t -> struct working_area Remove misleading typedef and redundant suffix from struct
	working_area.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : reg_cache_t -> struct reg_cache Remove misleading typedef and redundant suffix from struct
	reg_cache.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : oocd_trace_t -> struct oocd_trace Remove misleading typedef and redundant suffix from struct
	oocd_trace.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : mips_ejtag_t -> struct mips_ejtag Remove misleading typedef and redundant suffix from struct
	mips_ejtag.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : mips32_common_t -> struct mips32_common Remove misleading typedef and redundant suffix from struct
	mips32_common.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : image_mot_t -> struct image_mot Remove misleading typedef and redundant suffix from struct
	image_mot.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : image_ihex_t -> struct image_ihex Remove misleading typedef and redundant suffix from struct
	image_ihex.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : image_section_t -> struct image_section Remove misleading typedef and redundant suffix from struct
	image_section.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : etm_capture_driver_t -> struct etm_capture_driver Remove misleading typedef and redundant suffix from struct
	etm_capture_driver.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : etb_reg_t -> struct etb_reg Remove misleading typedef and redundant suffix from struct etb_reg.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : cortex_m3_common_t -> struct cortex_m3_common Remove misleading typedef and redundant suffix from struct
	cortex_m3_common.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : watchpoint_t -> struct watchpoint Remove misleading typedef and redundant suffix from struct
	watchpoint.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : mcu_jtag_t -> struct mcu_jtag Remove misleading typedef and redundant suffix from struct mcu_jtag.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : armv7m_algorithm_t -> struct armv7m_algorithm Remove misleading typedef and redundant suffix from struct
	armv7m_algorithm.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : armv7a_core_reg_t -> struct armv7a_core_reg Remove misleading typedef and redundant suffix from struct
	armv7a_core_reg.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : armv7a_common_t -> struct armv7a_common Remove misleading typedef and redundant suffix from struct
	armv7a_common.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : armv4_5_cache_common_t -> struct armv4_5_cache_common Remove misleading typedef and redundant suffix from struct
	armv4_5_cache_common.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : armv4_5_core_reg_t -> struct armv4_5_core_reg Remove misleading typedef and redundant suffix from struct
	armv4_5_core_reg.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : arm_jtag_t -> struct arm_jtag Remove misleading typedef and redundant suffix from struct arm_jtag.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : arm_load_store_instr_t -> struct arm_load_store_instr Remove misleading typedef and redundant suffix from struct
	arm_load_store_instr.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : arm_b_bl_bx_blx_instr_t -> struct arm_b_bl_bx_blx_instr Remove misleading typedef and redundant suffix from struct
	arm_b_bl_bx_blx_instr.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : swjdp_reg_t -> struct swjdp_reg Remove misleading typedef and redundant suffix from struct
	swjdp_reg.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : arm966e_common_t -> struct arm966e_common Remove misleading typedef and redundant suffix from struct
	arm966e_common.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : arm920t_tlb_entry_t -> struct arm920t_tlb_entry Remove misleading typedef and redundant suffix from struct
	arm920t_tlb_entry.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : arm7tdmi_common_t -> struct arm7tdmi_common Remove misleading typedef and redundant suffix from struct
	arm7tdmi_common.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : arm720t_common_t -> struct arm720t_common Remove misleading typedef and redundant suffix from struct
	arm720t_common.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : arm11_reg_state_t -> struct arm11_reg_state Remove misleading typedef and redundant suffix from struct
	arm11_reg_state.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : arm11_reg_defs_t -> struct arm11_reg_defs Remove misleading typedef and redundant suffix from struct
	arm11_reg_defs.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : mem_param_t -> struct mem_param Remove misleading typedef and redundant suffix from struct
	mem_param.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : arm11_register_history_t -> struct arm11_register_history Remove misleading typedef and redundant suffix from struct
	arm11_register_history.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : pld_device_t -> struct pld_device Remove misleading typedef and redundant suffix from struct
	pld_device.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : xilinx_bit_file_t -> struct xilinx_bit_file Remove misleading typedef and redundant suffix from struct
	xilinx_bit_file.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : connection_t -> struct connection Remove misleading typedef and redundant suffix from struct
	connection.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : tcl_connection_t -> struct tcl_connection Remove misleading typedef and redundant suffix from struct
	tcl_connection.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : telnet_service_t -> struct telnet_service Remove misleading typedef and redundant suffix from struct
	telnet_service.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : gdb_connection_t -> struct gdb_connection Remove misleading typedef and redundant suffix from struct
	gdb_connection.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : aduc702x_flash_bank_t -> struct aduc702x_flash_bank Remove misleading typedef and redundant suffix from struct
	aduc702x_flash_bank.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : pic32mx_mem_layout_t -> struct pic32mx_mem_layout Remove misleading typedef and redundant suffix from struct
	pic32mx_mem_layout.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : nand_block_t -> struct nand_block Remove misleading typedef and redundant suffix from struct
	nand_block.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : str9x_flash_bank_t -> struct str9x_flash_bank Remove misleading typedef and redundant suffix from struct
	str9x_flash_bank.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : str7x_flash_bank_t -> struct str7x_flash_bank Remove misleading typedef and redundant suffix from struct
	str7x_flash_bank.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : stm32x_flash_bank_t -> struct stm32x_flash_bank Remove misleading typedef and redundant suffix from struct
	stm32x_flash_bank.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : stellaris_flash_bank_t -> struct stellaris_flash_bank Remove misleading typedef and redundant suffix from struct
	stellaris_flash_bank.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : pic32mx_flash_bank_t -> struct pic32mx_flash_bank Remove misleading typedef and redundant suffix from struct
	pic32mx_flash_bank.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : ocl_priv_t -> struct ocl_priv Remove misleading typedef and redundant suffix from struct ocl_priv.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : nand_manufacturer_t -> struct nand_manufacturer Remove misleading typedef and redundant suffix from struct
	nand_manufacturer.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : nand_flash_controller_t -> struct nand_flash_controller Remove misleading typedef and redundant suffix from struct
	nand_flash_controller.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : mflash_bank_t -> struct mflash_bank Remove misleading typedef and redundant suffix from struct
	mflash_bank.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : mflash_gpio_drv_t -> struct mflash_gpio_drv Remove misleading typedef and redundant suffix from struct
	mflash_gpio_drv.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : lpc3180_nand_controller_t -> struct lpc3180_nand_controller Remove misleading typedef and redundant suffix from struct
	lpc3180_nand_controller.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : lpc288x_flash_bank_t -> struct lpc288x_flash_bank Remove misleading typedef and redundant suffix from struct
	lpc288x_flash_bank.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : flash_driver_t -> struct flash_driver Remove misleading typedef and redundant suffix from struct
	flash_driver.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : faux_flash_bank_t -> struct faux_flash_bank Remove misleading typedef and redundant suffix from struct
	faux_flash_bank.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : cfi_fixup_t -> struct cfi_fixup Remove misleading typedef and redundant suffix from struct
	cfi_fixup.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : cfi_spansion_pri_ext_t -> struct cfi_spansion_pri_ext Remove misleading typedef and redundant suffix from struct
	cfi_spansion_pri_ext.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : cfi_intel_pri_ext_t -> struct cfi_intel_pri_ext Remove misleading typedef and redundant suffix from struct
	cfi_intel_pri_ext.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : avrf_flash_bank_t -> struct avrf_flash_bank Remove misleading typedef and redundant suffix from struct
	avrf_flash_bank.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : at91sam7_flash_bank_t -> struct at91sam7_flash_bank Remove misleading typedef and redundant suffix from struct
	at91sam7_flash_bank.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : jtag_command_container_t -> union jtag_command_container Remove misleading typedef from union jtag_container.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : end_state_command_t -> struct end_state_command Remove misleading typedef from struct end_state_command.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : stableclocks_command_t -> struct stableclocks_command Remove misleading typedef from struct stableclocks_command.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : pathmove_command_t -> struct pathmove_command Remove misleading typedef from struct pathmove_command.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : cmd_queue_page_t -> struct cmd_queue_page Remove misleading typedef from struct cmd_queue_page.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : more vsllink typedef cleanup Remove useless typedef for struct insert_insignification_operation.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : presto_t -> struct presto Remove useless typedef.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : jlink_jtag_t -> struct jlink Remove misleading typedef and redundant suffix.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : pending_scan_result_t -> struct pending_scan_result Remove misleading typedef from struct struct pending_scan_result.
	Future patches need to remove these duplicated types and code.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : use struct jtag_tap_event_action Remove useless typedef and redundant suffix from
	jtag_tap_event_action.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : jtag_interface_t -> struct jtag_interface Remove useless typedef and redundant suffix from struct
	jtag_interface.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : bitq_interface_t -> struct biq_interface Remove useless typedef and redundant suffix.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : scan_field_t -> struct scan_field Remove useless structure typedef.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : fileio_t -> struct fileio Remove useless structure typedef.

2009-11-13  Zachary T Welch <zw@superlucidity.net>

	* : remove accidental artifact Somehow I managed to slip a temporary build file into the tree.
	Remove it and update the .gitignore file so it doesn't happen again.

2009-11-11  Zachary T Welch <zw@superlucidity.net>

	* : add src/hello.c to augment new command tutorial The hello module provides the 'hello' command, printing a greetings
	to the command console.  It can grow to serve as pedagogical example
	of services that OpenOCD developers should use: a runnable style
	guide.

2009-11-10  Zachary T Welch <zw@superlucidity.net>

	* : command_handler_t: make args parameter const This patch prevents command handlers from modifying the strings
	passed in the 'args' array.

2009-11-10  Zachary T Welch <zw@superlucidity.net>

	* : command_handler_t: make argc unsigned The number of command arguments will always be 0 or more, so use the
	right type in handlers.  This has a cascading effect up through the
	layers, but the new COMMAND_HANDLER macros prevented total chaos.

2009-11-10  Zachary T Welch <zw@superlucidity.net>

	* : use CALL_COMMAND_HANDLER instead of direct calls By using CALL_COMMAND_HANDLER, parameters can be reordered, added,
	or even removed in inherited signatures, without requiring
	revisiting all of the various call sites.

2009-11-10  Zachary T Welch <zw@superlucidity.net>

	* : nand: add NAND_DEVICE_COMMAND_HANDLER macro Abstracts the extended NAND command handling to allow the function
	signature to be controlled by __COMMAND_HANDLER.

2009-11-10  Zachary T Welch <zw@superlucidity.net>

	* : add FLASH_BANK_COMMAND_HANDLER macro The FLASH_BANK_COMMAND_HANDLER provides an extended command handler
	using the __COMMAND_HANDLER macro, whereby changing that macro is
	sufficient to update flash handlers with the new signature.  It also
	enforces uniform style and scope when implementing this handler.

2009-11-10  Zachary T Welch <zw@superlucidity.net>

	* : arm_adi,armv7[am]: use COMMAND_HELPER for helpers Rewrites the dap_* command helpers to use the COMMAND_HELPER
	paradigm.  Uses CALL_COMMAND_HELPER to hide inherited calling
	conventions.

2009-11-09  Zachary T Welch <zw@superlucidity.net>

	* : use COMMAND_HANDLER macro to define all commands

2009-11-10  Zachary T Welch <zw@superlucidity.net>

	* : add COMMAND_HANDLER and COMMAND_HELPER macros The COMMAND_HANDLER and COMMAND_HELPER macros allow commands to be
	defined in a manner that decouples them from the exact order and
	type of their parameters.  Once converted, incremental changes to
	the command handler type can be addressed in incremental patches
	that do not need to touch the entire tree.  These macros' implementation, __COMMAND_HANDLER, is used to define
	the new command_handler_t type, and additional patches will use it
	to derive new macros to define extended command types (e.g. flash,
	nand, pld).  The CALL_COMMAND_HANDLER provides a means of calling
	helpers or nested handlers from withing a command handler.  This patch uses C99 varadic macro expansion.  Please report
	compilers that cannot handle this code.

2009-11-13  David Brownell <dbrownell@users.sourceforge.net>

	* : Cortex-A8: fix indent The "remove (forward) declarations" patch goofed indentation on the
	"cortexa8_target" struct; fix.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-12  David Brownell <dbrownell@users.sourceforge.net>

	* : ETM: start support for ETMv2+ ARM11 and newer cores include updated ETM modules.  Recognize their
	version codes and some key config differences.  Sanity checked on an
	OMAP2, with an ETM11RV r0p1 (ETMv3.1).  This still handles only scan chain 6, with at most 128 registers.
	Newer cores (mostly, Cortex) will need to use the DAP instead.  Note that the newer ETM modules don't quite fit the quirky config
	model of the older ones ... having more port widths is easy, but the
	modes aren't the same.  That still needs to change.  Fix a curious bug ... how did the register cache NOT get saved?? Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-12  Jonas Horberg <jhorberg@sauer-danfoss.com>

	* : parport: add support for the jtag_khz command.  Add the khz and speed_div functions to the parport interface driver.
	Add the parport_toggling_time function that tells the parport driver
	how long (in nanoseconds) it takes for the hardware to toggle TCK.  [dbrownell@users.sourceforge.net: tweak doc for clarity, mention
	multimeter, and whitespace fixes] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-11  David Brownell <dbrownell@users.sourceforge.net>

	* : ETM: use new toplevel ETM handle Make ETM itself use the new toplevel ETM handle, instead of the
	to-be-removed lower level one.  As of this patch, nothing should be
	using the old ARM7/ARM9-specific handle.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-11  David Brownell <dbrownell@users.sourceforge.net>

	* : ETM: update arm[79]tdmi_examine() Make ARM7 and ARM9 cores use the new toplevel ETM handle to trigger
	ETM setup, not the to-be-removed lower level one.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-10  Zachary T Welch <zw@superlucidity.net>

	* : fix 'jtag interface' behavior Without this patch, running "openocd -c 'jtag interface'" segfaults.
	Now, it returns the string "undefined" when the interface is unset.

2009-11-11  Zachary T Welch <zw@superlucidity.net>

	* : add help regardless of callback Add help for commands regardless of whether a handler is involved.
	With this, all sorts of new commands can be found in 'help' text.
	Hopefully, all of them have been documented....  Sadly, the lsort function appears to handle nested lists poorly,
	such that sub-commands do not group with their parents.

2009-11-11  Zachary T Welch <zw@superlucidity.net>

	* : add command_name helper The command_name function returns a malloced string for a given
	command and its parents.  This can be used to display a message to
	the user, but it is used internally to handle registration and
	syntax errors.  This helps permit arbitrary command nesting.

2009-11-11  Zachary T Welch <zw@superlucidity.net>

	* : remove obsolete doxygen comments Documenting command handler parameters is redundant and pointless.

2009-11-10  Zachary T Welch <zw@superlucidity.net>

	* : cortex_a8: remove declarations, use static keyword

2009-11-10  Zachary T Welch <zw@superlucidity.net>

	* : change argv to args in command handlers Subsequent patches expect all command handlers to use a uniform
	parameter naming scheme.  In the entire tree, these two files used
	standard 'argv' instead of our non-standard 'args'.  This patch opts
	to reduces the noise required to unify the command handlers, using
	dominant 'args' form.  A future patch may be used to convert us back to the standard argv,
	but that requires coordination with all developers to minimize
	disruptions.

2009-11-09  Zachary T Welch <zw@superlucidity.net>

	* : command.c: make private routines static This patch also improves the signature of run_command function.

2009-11-09  Zachary T Welch <zw@superlucidity.net>

	* : time_support: improve use of types Update timeval_add_time to use long int; implement timeval_add with
	it.  Update timeval_ms to check gettimeofday return value, return
	int64_t.

2009-11-11  David Brownell <dbrownell@users.sourceforge.net>

	* : ETM cleanup Various cleanups of ETM related code.   - Saner error return paths  - Simplify arm7_9 init ... no need for extra zeroing!  - Shrink some lines  - Tweak some diagnostics  - Use shorter name for ETM struct type.   - Don't exit() and similar.  The diagnostics look forward to having this ETM code
	work with more than just ARM7/ARM9.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-10  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM720: bugfix The "ARM720 uses the new inheritance/nesting scheme" patch wrongly
	scrubbed a calloc() from arm720t_target_create().  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-10  David Brownell <dbrownell@users.sourceforge.net>

	* : target.cfg: (re)move some bogus reset_config lines General rule, this is all board-specific and doesn't belong in
	target config files.  Some of these were just cosmetic.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-27  Michael Bruck <mbruck@digenius.de>

	* : arm11: add etmr/etmw registers to access ETM via DBGTAP scan
	chain First cut of these commands. Øyvind tinkered a bit with the number
	parsing to bring it up to speed + rebased it.  Ready for testing.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-10  yvind Harboe <oyvind.harboe@zylin.com>

	* : telo.cfg: fix search paths Add the missing "target/" prefix for scripts in the target folder.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-10  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM920: implement basic MMU ops mmu() works; virt2phys() fails and logs an error.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-10  David Brownell <dbrownell@users.sourceforge.net>

	* : Target: fix bad error messages And shrink a few too-long lines.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-10  yvind Harboe <oyvind.harboe@zylin.com>

	* : tcl: HostOs now picks up eCos as well during compile time Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-09  Zachary T Welch <zw@superlucidity.net>

	* : command.c: make commands static Removes useless declarations, moving the handler functions to appear
	before their use in the (much bigger) command registriation
	function.

2009-11-09  Zachary T Welch <zw@superlucidity.net>

	* : jtag: remove useless declarations Contrary to my previous assessment, some opportunities to remove
	forward declarations were overlooked.  Remove them by moving the
	definitions of the command registration and interface structure to
	the end of files.

2009-11-09  Zachary T Welch <zw@superlucidity.net>

	* : {pic32m,stm32}x.c: remove useless declarations Remove useless forward declarations.  Moves command registrations to
	end of files.  Moves flash structure definitions to end of files.  Signed-off-by: Zachary T Welch <zw@superlucidity.net>

2009-11-09  Zachary T Welch <zw@superlucidity.net>

	* : flash/<various>.c: remove useless declarations Remove useless forward declarations.  Moves flash structure
	definitions to end of files.  Signed-off-by: Zachary T Welch <zw@superlucidity.net>

2009-11-09  Zachary T Welch <zw@superlucidity.net>

	* : flash/at91sam[37].c: remove useless declarations Remove useless forward declarations.  Moves command registration to
	end of file.  Moves flash structure definitions to end of files.  Changes a few references to global flash structure to local refs.  Signed-off-by: Zachary T Welch <zw@superlucidity.net>

2009-11-09  Zachary T Welch <zw@superlucidity.net>

	* : flash/*nand*.c: remove useless declarations Remove useless forward declarations.  Moves command registration to
	end of files.  Moves flash structure definition to end of files.  Signed-off-by: Zachary T Welch <zw@superlucidity.net>

2009-11-09  David Brownell <dbrownell@users.sourceforge.net>

	* : Revert "target: add target->type->has_mmu fn" This patch introduced a bug preventing flash writes from working on
	Cortex-M3 targets like the STM32.  Moreover, it's the wrong approach
	for handling no-MMU targets.  The right way to handle no-MMU targets is to provide accessors for
	physical addresses, and use them everywhere; and any code which
	tries to work with virtual-to-physical mappings should use a
	identity mapping (which can be defaulted).  And ... we can tell if a target has an MMU by seeing if it's got an
	mmu() method.  No such methood means no MMU.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-09  David Brownell <dbrownell@users.sourceforge.net>

	* : User's Guide: Flash/NAND doc tweaks Rename the "Drivers, Options, and Commands" sections to be just
	"Driver List" matching the earlier reference.  Add an example of
	parallel CFI flash.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-09  Zachary T Welch <zw@superlucidity.net>

	* : target.h: remove extern keyword and wrap Removes 'extern' keyword from function prototypes and wraps long
	lines.

2009-11-09  Zachary T Welch <zw@superlucidity.net>

	* : src/flash: remove 'extern' and wrap headers Removes 'extern' keywords from function prototypes in the flash
	headers.  Wraps long lines to fit into 80 columns.  Adds multiple inclusion protection for s3c2xx_nand.h.

2009-11-09  Zachary T Welch <zw@superlucidity.net>

	* : src/helper: wrap and clean headers.  Remove all useless 'extern' keywords from function prototypes.
	Wraps long lines for readability.

2009-11-09  David Brownell <dbrownell@users.sourceforge.net>

	* : EmbeddedICE: minor cleanups Add comments (Doxygen and normal), remove unused code, shrink some
	overlong lines.  Get rid of a forward decl.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-06  Zachary T Welch <zw@superlucidity.net>

	* : Add private header for ARM11 internals.  Reduces confusion about location of associated routines and reduces
	clutter in the arm11 header.  Removes extra whitespace around the lines touched by these changes.

2009-11-08  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: minor simulator cleanup Make several functions be static.  Shrink some of the overlong
	lines.  Use pure tab indents in some places that mixed in spaces.
	This gives a minor object code shrink (about 2% on amd64).  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-08  David Brownell <dbrownell@users.sourceforge.net>

	* : target.cfg: remove "-work-area-virt 0" The semantics of "-work-area-virt 0" (or phys) changed with the
	patch to require specifying physical or virtrual work area
	addresses.  Specifying zero was previously a NOP.  Now it means that
	address zero is valid.  This patch addresses three related issues:  - MMU-less processors should never specify work-area-virt;    remove those specifications.  Such processors include    ARM7TDMI, Cortex-M3, and ARM966.   - MMU-equipped processors *can* specify work-area-virt...     but zero won't be appropriate, except in mischievous    contexts (which hide null pointer exceptions).     Remove those specs from those processors too.  If any of    those mappings is valid, someone will need to submit a    patch adding it ... along with a comment saying what OS    provides the mapping, and in which context.  Example,    say "works with Linux 2.6.30+, in kernel mode".  (Note    that ARM Linux doesn't map kernel memory to zero ...)  - Clarify docs on that "-virt" and other work area stuff.  Seems to me work-area-virt is quite problematic; not every operating
	system provides such static mappings; if they do, they're not in
	every MMU context...  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-06  David Brownell <dbrownell@users.sourceforge.net>

	* : commit a9abfa7d06dbcfded97b7fb41f50d3581c24fbae Author: David
	Brownell <dbrownell@users.sourceforge.net> Date:   Fri Nov 6
	14:57:21 2009 -0800

2009-11-05  Zachary T Welch <zw@superlucidity.net>

	* : Simplify nand indentation.  Removes check covered by new nand_command_get_device_by_num helper.
	Reverses logic of probe check to further reduce indentation.

2009-11-06  Zachary T Welch <zw@superlucidity.net>

	* : Fix arm11 vcr command parsing.

2009-11-05  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM: other code uses the new inheritance/nesting scheme Remove most remaining uses of target->arch_info from ARM
	infrastructure, where it hasn't already been updated.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-05  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM7TDMI uses the new inheritance/nesting scheme Use target_to_arm7_9(), replacing needless pointer traversals.  Also:  remove now-useless contents of arm7tdmi struct; it's almost
	ready to be removed.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-05  David Brownell <dbrownell@users.sourceforge.net>

	* : XScale uses the new inheritance/nesting scheme Use target_to_xscale(), replacing needless pointer traversals and
	simplifying a bunch of code.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-05  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM966 uses the new inheritance/nesting scheme Use target_to_arm966(), replacing needless pointer traversals.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-05  David Brownell <dbrownell@users.sourceforge.net>

	* : FA526 uses the new inheritance/nesting scheme Replace needless pointer traversals, simplify.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-05  David Brownell <dbrownell@users.sourceforge.net>

	* : Cortex-M3: use the new inheritance/nesting scheme Use new target_to_cm3() and target_to_armv7m() inlines, instead of a
	series of x->arch_info conversions.  Remove arch_info, since nothing
	uses it.  Also fix an omission:  the Cortex-M3 commands didn't verify that
	they were operating on that kind of target.  Add comment about the
	ARMv7M version of that omission.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-05  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM7TDMI: remove forward decls The forward decls are just code clutter; remove them, by moving
	their references after definitions.  This is another file which
	never needed even one internal forward declaration.  Also shrink a few overly-long lines with function declarations or
	definitions;  get rid of arm7tdmi_register_commands(), it's not
	needed (just delegated); minor whitespace declutter.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-05  David Brownell <dbrownell@users.sourceforge.net>

	* : FA526: remove exports and forward decls Unneeded exports cause confusion about the module interfaces.  Make
	most functions static.  The forward decls are just code clutter; remove them, by moving
	their references after definitions.  This is another file which
	never needed even one internal forward declaration.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-05  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM966: remove exports and forward decls Unneeded exports cause confusion about the module interfaces.  Make
	most functions static.  The forward decls are just code clutter; remove them, by moving
	their references after definitions.  This is another file which
	never needed even one internal forward declaration.  Also remove needless arm966e_init_target(), in favor of the arm9tdmi
	routine to which it delegates its work.  This saved over 100 bytes of code on x86_32.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-05  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM920: remove exports and forward decls Unneeded exports cause confusion about the module interfaces.  Make
	most functions static.  Add a short header comment.  The forward decls are just code clutter; remove them, by moving
	their references after definitions.  This is another file which
	never needed even one internal forward declaration.  This saved almost 900 bytes of code on x86_32; it seems the compiler
	can leverage its knowledge that these functions are not called from
	the outside world...  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-23  Zachary T Welch <zw@superlucidity.net>

	* : Improve str9x config command argument parsing.

2009-10-22  Zachary T Welch <zw@superlucidity.net>

	* : Improve stm32x.c command argument parsing.

2009-10-22  Zachary T Welch <zw@superlucidity.net>

	* : Improve pic32mx.c command argument parsing.

2009-10-23  Zachary T Welch <zw@superlucidity.net>

	* : Improve lpc3180_nand_controller.c parsing.  This fixes a memory leak in lpc3180_nand_device_command by
	reordering the malloc to occur after all parsing has completed.

2009-10-23  Zachary T Welch <zw@superlucidity.net>

	* : Improve lpc288x.c command argument parsing.

2009-10-23  Zachary T Welch <zw@superlucidity.net>

	* : Improve cfi.c command argument parsing.

2009-10-22  Zachary T Welch <zw@superlucidity.net>

	* : Improve orion_nand.c command argument parsing.

2009-10-22  Zachary T Welch <zw@superlucidity.net>

	* : Improve at91sam7.c command argument parsing.

2009-10-22  Zachary T Welch <zw@superlucidity.net>

	* : Improve nand.c command argument parsing.

2009-10-23  Zachary T Welch <zw@superlucidity.net>

	* : Add Flash/NAND bank command argument helpers.  This eliminates redundant code for parsing and retreiving the bank
	specified from a script command argument.  This patch was written to
	replace existing functionality; however, the parsing logic can be
	updated later to allow flash commands to accept bank names as well
	as their numbers.

2009-10-22  Zachary T Welch <zw@superlucidity.net>

	* : Improve etm command argument parsing.

2009-10-24  Zachary T Welch <zw@superlucidity.net>

	* : Improve arm_adi_v5 command argument parsing.

2009-10-24  Zachary T Welch <zw@superlucidity.net>

	* : Improve xscale command argument parsing.

2009-10-24  Zachary T Welch <zw@superlucidity.net>

	* : Improve arm966e command argument parsing.

2009-10-24  Zachary T Welch <zw@superlucidity.net>

	* : Improve arm920t command argument parsing.

2009-10-22  Zachary T Welch <zw@superlucidity.net>

	* : Improve arm7_9_common command argument parsing.

2009-10-24  Zachary T Welch <zw@superlucidity.net>

	* : Improve armv7a command argument parsing.

2009-10-24  Zachary T Welch <zw@superlucidity.net>

	* : Improve xscale command argument parsing.

2009-10-24  Zachary T Welch <zw@superlucidity.net>

	* : Update all server port command to use new helper.

2009-10-22  Zachary T Welch <zw@superlucidity.net>

	* : Improve target.c command argument parsing.  Passes cmd_ctx into parse_load_image_command_args for reporting the
	parsing errors therein.

2009-10-22  Zachary T Welch <zw@superlucidity.net>

	* : Improve debug_level command argument parsing.

2009-10-22  Zachary T Welch <zw@superlucidity.net>

	* : Add stringify macros in src/helper/types.h.

2009-10-27  yvind Harboe <oyvind.harboe@zylin.com>

	* : arm11: check if target is halted before executing mrc/mcr
	commands.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-10-26  yvind Harboe <oyvind.harboe@zylin.com>

	* : target: check args to mrc/mcr.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-10-24  yvind Harboe <oyvind.harboe@zylin.com>

	* : TODO: Wrote up list of remaining tasks for target->type->mrc/mcr Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-10-24  yvind Harboe <oyvind.harboe@zylin.com>

	* : cortex_a8: add mrc mcr interface.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-05  David Brownell <dbrownell@users.sourceforge.net>

	* : watchpoint_add() cleanup Fail watchpoint_add() if it's the same address but the parameters
	are different ... don't just assume having the same address means
	the same watchpoint!  (Note that overlapping watchpoints aren't
	detected...) Handle unrecognized return codes more sanely; don't exit()! And
	describe command params right.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-05  David Brownell <dbrownell@users.sourceforge.net>

	* : Cortex-M3: minor cleanup There's no reason to read which interrupts are enabled from the
	NVIC; that state isn't used.  Plus, it's highly dynamic since
	firmware can change it at any time; remove the support for those
	state records.  Remove duplicate definition of DWT_CTRL address; shrink a line.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-05  David Brownell <dbrownell@users.sourceforge.net>

	* : ARMv7M: add docs, remove exports Add Doxygen for the exported ARMv7-M interfaces.  Make the non-exported stuff static.  Remove functions and data which
	are now observably unused.  Add comment about a small speedup that the run_algorithm() logic
	could use.  Shrink a few too-long lines.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-26  yvind Harboe <oyvind.harboe@zylin.com>

	* : Make default implementation of mdw/mmw phys return error 'not
	implemented'

2009-10-30  yvind Harboe <oyvind.harboe@zylin.com>

	* : debug interface: get rid of unused pre_debug fn Removing unused code makes it much less mysterius.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-04  David Brownell <dbrownell@users.sourceforge.net>

	* : ft2232: cleanup Previous patch somehow made GCC lose some of its cookies; work
	around, zero-init that struct.  Clean up code from the previous patch.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-04  David Brownell <dbrownell@users.sourceforge.net>

	* : PXA255: support Intel "Lubbock" platform Config for Intel's "Lubbock" PXA255 development board.  Even more so
	than the PXA255 itself, this is obsolete.  AFAIK this was the first
	generally available development platform for PXA255.  Intel stopped
	providing these after other devel boards became available.  One interesting thing about this board from the OpenOCD perspective
	is probably its flash configuration.  Each bank is 32 bits wide,
	built from two 16-bit StrataFlash chips wired in parallel.  This
	doubles throughput ... it reads/writes 32 bits in the time a single
	chip takes to write just 16 bits.  This conf mostly works, given XScale bugfixes, but has some issues
	(notably: no access to the on-board SDRAM) flagged by FIXMEs.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-04  David Brownell <dbrownell@users.sourceforge.net>

	* : Version 0.3.0 Remove -dev tag, remove -rc tag.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-04  David Brownell <dbrownell@users.sourceforge.net>

	* : Doc: fix broken link Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-04  David Brownell <dbrownell@users.sourceforge.net>

	* : Other files: stop referring to ChangeLog too The ChangeLog idiom is redundant given any decent SCM.  Time to
	phase it out here.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-04  David Brownell <dbrownell@users.sourceforge.net>

	* : Tweak release docs Contrast releases to git snapshot tarballs.  Mention that releases
	have some quality-improvement focus, with special non-"dev" version
	IDs.  Explain more about version IDs, using "openocd -v" to see
	them, etc; Make release milestone info be less specific about timing, and
	presume we have both a merge window and an RC stage.  Rework the release process information to match reality a bit more
	closely.  Reference the version.sh script (in one place the wrong
	script was referenced).  Bugfix branches get special treatment,
	while non-bugfix releases are more or less what *defines* being the
	mainline branch.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-04  yvind Harboe <oyvind.harboe@zylin.com>

	* : configure: fix build problems with eCos Various include files require some other include files to be
	included first. Copied solution from net/if.h.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-03  yvind Harboe <oyvind.harboe@zylin.com>

	* : target: 20 second timeout/megabyte for CRC check There was a fixed 20 second timeout which is too little for large,
	slow timeout checks.  Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-02  yvind Harboe <oyvind.harboe@zylin.com>

	* : target: require working area for physical/virtual addresses to
	be specified Fixed bug: if virtual address for working memory was not specified
	and MMU was enabled, then address 0 would be used.  Require working address to be specified for both MMU enabled and
	disabled case.  For some completely inexplicable reason this fixes the regression in
	svn 2646 for flash write in arm926ejs target. The logs showed that
	MMU was disabled in the case below:
	https://lists.berlios.de/pipermail/openocd-development/2009-November/011882.htmlSigned-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>

2009-11-01  David Brownell <dbrownell@users.sourceforge.net>

	* : User's Guide: more init info, autoprobing, etc Mention the autoprobing as a tool that may be useful when figuring
	out how to set up; and add a section showing how to use that
	mechanism (with an example).  Strengthen the differences between config and run stage
	descriptions; add a section for the latter.  Mention Dragonite.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-11-01  Freddie Chopin <freddie_chopin@op.pl>

	* : remove "-ircapture 0x1 -irmask 0x1" from stm32.cfg Gets rid of the runtime warning "stm32.bs: nonstandard IR mask" [dbrownell@users.sourceforge.net: line lengths, note issue, section
	ref] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-29  Freddie Chopin <freddie_chopin@op.pl>

	* : target.cfg: use $_TARGETNAME for flash This gets rid of runtime warnings from the use of numbers.  STM32
	and LPC2103 were tested.  Other LPC updates are the same, and so are
	safe.  The CFI updates match other tested changes now in the tree.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-30  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM926: fix arm926ejs_mmu() reading from bad pointer I'm suspecting this code can never have worked, since the original
	commit (svn #335) in early 2008.  Fix is just copy/paste from another (working) function.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-29  Michael Roth <mroth@nessie.de>

	* : SVF: fix checking bit pattern against length The code works like follow (N = bit_len): 	N	-1	%4	2<<	-1	~ (binary) 	-------------------------------------------------- 	1	0	0	2	1	1111 1110 	2	1	1	4	3	1111 1100 	3	2	2	8	7	1111 1000 	4	3	3	16	15	1111 0000 	5	4	0	2	1	1111 1110 	6	5	1	4	3	1111 1100 	7	6	2	8	7	1111 1000 	8	7	3	16	15	1111 0000 	...	...	...	...	...	...  Addresses a bug reported by FangfangLi <ffli@syntest.com.cn>.  [dbrownell@users.sourceforge.net: fix spelling bug too] Signed-off-by: Michael Roth <mroth@nessie.de> Cc: FangfangLi
	<ffli@syntest.com.cn> Signed-off-by: David Brownell
	<dbrownell@users.sourceforge.net>

2009-10-29  David Brownell <dbrownell@users.sourceforge.net>

	* : XSVF: bugfix handling state paths Implement XSVF support for detailed state path transitions, by
	collecting sequences of XSTATE transitions into paths and then
	calling pathmove().  It seems that the Xilinx tools want to force state-by-state
	transitions instead of relying on the standardized SVF paths.  Like
	maybe there are XSVF tools not implementing SVF paths, which are all
	that we support using svf_statemove().  So from IRPAUSE, instead of just issuing "XSTATE DRPAUSE" they will
	issue XSTATES for each intermediate state: first IREXIT2, then
	IRUPDATE, DRSELECT, DRCAPTURE, DREXIT1, and finally DRPAUSE.  This
	works now.  Handling of paths that go *through* reset is a trifle dodgey, but it
	should be safe.  Tested-by: Wookey <wookey@wookware.org> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-28  Zachary T Welch <zw@superlucidity.net>

	* : The openocd 0.3.0-rc0 release.  Remove '-dev' version tag: 0.3.0-rc0-dev -> 0.3.0-rc0

2009-10-28  David Brownell <dbrownell@users.sourceforge.net>

	* : ARM926: remove exports and forward decls Unneeded exports cause confusion about the module interfaces.  Only
	the Feroceon code builds on this, so only routines it reuses should
	be public..  Make most remaining functions static, and fix some of
	the line-too-long issues.  The forward decls are just code clutter; move their references
	later, after the normal declarations.  Turns out we don't need even
	one forward declaration in this file.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-22  Zachary T Welch <zw@superlucidity.net>

	* : Add script to test the release process.  Runs the release.sh script in a freshly cloned repository, charting
	one hypothetical future of OpenOCD's lineage.

2009-10-20  Zachary T Welch <zw@superlucidity.net>

	* : Factor version munging capabilities out of release.sh.

2009-10-24  Zachary T Welch <zw@superlucidity.net>

	* : Add git2cl from repo.or.cz as a submodule in tools/git2cl.

2009-10-27  Nicolas Pitre <nico@fluxnic.net>

	* : ARM: fix single-step of Thumb unconditional branch Only type 1 branch instruction has a condition code, not type 2.
	Currently they're both tagged with ARM_B which doesn't allow for the
	distinction.  Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: David
	Brownell <dbrownell@users.sourceforge.net>

2009-10-27  Oleg Seiljus <oleg@signalyzer.com>

	* : Signalyzer: H2 and H4 support This patch includes partial support for these new JTAG adapters.
	More complete support will require updates to the libftdi code, for
	EEPROM access.  [dbrownell@users.sourceforge.net: fix whitespace, linelen, etc ] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-27  Nicolas Pitre <nico@fluxnic.net>

	* : ARM: fix Thumb mode handling when single-stepping register based
	branch insns Currently, OpenOCD is always caching the PC value without the T bit.
	This means that assignment to the PC register must clear that bit
	and set the processor state to Thumb when it is set.  And when the
	PC register value is transferred to another register or stored into
	memory then the T bit must be restored.  Discussion: It is arguable if OpenOCd should have preserved the
	original PC value which would have greatly simplified this code.
	The processor state could then be obtained simply by getting at bit
	0 of the PC.  This however would require special handling elsewhere
	instead since the T bit is not always relevant (like when PC is used
	with ALU insns or as an index with some addressing modes).  It is
	unclear which way would be simpler in the end.  Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: David
	Brownell <dbrownell@users.sourceforge.net>

2009-10-27  Nicolas Pitre <nico@fluxnic.net>

	* : ARM: call thumb_pass_branch_condition() only for actual branch
	opcodes Calling it first with every opcodes and then testing if the opcode
	was indeed a branch instruction is wasteful and rather strange.  If
	ever thumb_pass_branch_condition() has side effects (say, like
	printing a debugging traces) then the result would be garbage for
	most Thumb instructions which have no condition code.  While at it, let's make the nearby code more readable by reducing
	some of the redundant brace noise and reworking the error handling
	construct.  Signed-off-by: Nicolas Pitre <nico@marvell.com> Signed-off-by: David
	Brownell <dbrownell@users.sourceforge.net>

2009-10-26  David Brownell <dbrownell@users.sourceforge.net>

	* : JTAG: "jtag newtap ..." cleanup Get rid of needless variable, improve and shrink diagnostic.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-26  David Brownell <dbrownell@users.sourceforge.net>

	* : omap3530: target reset/init improvements Now I can issue "reset halt" and have everything act smoothly; the
	vector_catch hardware is obviously not kicking in, but the rest of
	the reset sequence acts sanely.   - TAP "setup" event enables the DAP, not omap3_dbginit    (resolving a chicken/egg bug I noted a while back)  - Remove stuff from omap3_dbginit which should never be    used in event handlers  - Cope better with slow clocking during reset Also, stop hard-wiring the target name: use the input params in the
	standard way, and set up $_TARGETNAME as an output param.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-26  Spencer Oliver <ntfreak@users.sourceforge.net>

	* : Fix incorrect line endings Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>

2009-10-26  Wookey <wookey@wookware.org>

	* : balloon3 board base config This is the very basic board config for the balloon3 board cpu JTAG
	channel.  The rest of the config comprises another 14 .cfg files which I
	suspect openocd doesn't really want all of. I'm still not sure how
	to deal with this. I'll post another mail/patch to discuss.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-23  yvind Harboe <oyvind.harboe@zylin.com>

	* : Idea for adding watchpoint masks.

2009-10-25  David Brownell <dbrownell@users.sourceforge.net>

	* : minor fixes to TODO list

2009-10-25  yvind Harboe <oyvind.harboe@zylin.com>

	* : check if mmu is enabled before using mmu code path

2009-10-25  David Brownell <dbrownell@users.sourceforge.net>

	* : JTAG: jtag_tap_init() bugfixes Stop allocating three bytes per IR bit, and cope somewhat better
	with IR lengths over 32 bits.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-24  yvind Harboe <oyvind.harboe@zylin.com>

	* : vector_catch and watchpoint TODO items.

2009-10-23  yvind Harboe <oyvind.harboe@zylin.com>

	* : Improve help for arm9 vector_catch.

2009-10-23  yvind Harboe <oyvind.harboe@zylin.com>

	* : mcr/mrc interface work. Implemented for arm926ejs and arm720t.
	mcr/mrc commands added.

2009-10-23  David Brownell <dbrownell@users.sourceforge.net>

	* : jtag: clean up TAP state name handling Some cosmetic cleanup, and switch to a single table mapping between
	state names and symbols (vs two routines which only share that state
	with difficulty).  Get rid of TAP_NUM_STATES, and some related knowledge about how TAP
	numbers are assigned.  Later on, this will help us get rid of more
	such hardwired knowlege.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-22  Nicolas Pitre <nico@fluxnic.net>

	* : Ferocion: fix corruption of r0 when resuming Thumb mode The wrong variable (pc instead of r0) was used.  Furthermore,
	someone did cover this error by stupidly silencing the compiler
	warning that occurred before a dummy void reference to r0 was added
	to the code.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-22  David Brownell <dbrownell@users.sourceforge.net>

	* : ETM: rename registers, doc tweaks The register names are perversely not documented as zero-indexed, so
	rename them to match that convention.  Also switch to lowercase
	suffixes and infix numbering, matching ETB and EmbeddedICE usage.  Update docs to be a bit more accurate, especially regarding what the
	"trigger" event can cause; and to split the issues into a few more
	paragraphs, for clarity.  Make "configure" helptext point out that "oocd_trace" is prototype
	hardware, not anything "real".  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : mww_phys retired. Replaced by generic mww phys in target.c

2009-10-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : retire obsolete mXY_phys commands. Handled by generic memory
	read/modify commands and target read/write physical memory
	callbacks.

2009-10-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : add support for target_read/write_phys_memory callbacks.

2009-10-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : commit 69a6037ce6e76dca4117689208358231dffa0929 Author: Øyvind
	Harboe <oyvind.harboe@zylin.com> Date:   Wed Oct 21 13:10:32 2009
	+0200

2009-10-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : Retire obsolete and superfluous implementations of virt2phys in
	each target. This is done in a polymorphic implementation in
	target.c

2009-10-21  yvind Harboe <oyvind.harboe@zylin.com>

	* : Defined target_write_memory() to be able to handle implementing
	breakpoints for read only ram(e.g. MMU write protected.

2009-10-20  David Brownell <dbrownell@users.sourceforge.net>

	* : XSVF: use svf_add_statemove() XSVF improvements:  - Layer parts of XSVF directly over SVF, calling
	   svf_add_statemove() instead of expecting jtag_add_statemove() to
	   conform to the SVF/XSVF requirements (which it doesn't).     This should improve XSTATE handling a lot; it removes most users
	   of jtag_add_statemove(), and the comments about how it should
	   really do what svf_add_statemove() does.   - Update XSTATE logic to be a closer match to the XSVF spec.  The
	   main open issue here is (still) that this implementation doesn't
	   know how to build and submit paths from single-state transitions ...
	   but now it will report that error case.   - Update the User's Guide to mention the two utility scripts for    working with XSVF, and to mention the five extension opcodes.  Handling of state transition paths is, overall, still a mess.  I
	think they should all be specified as paths not unlike SVF uses, and
	compiled to the bitstrings later ... so that we can actually make
	sense of the paths.  (And see the extra clocks, detours through RUN,
	etc.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-20  yvind Harboe <oyvind.harboe@zylin.com>

	* : Added the faux flash driver and target. Used for testing.

2009-10-20  yvind Harboe <oyvind.harboe@zylin.com>

	* : More svn to git version string fixes.

2009-10-19  David Brownell <dbrownell@users.sourceforge.net>

	* : davinci: add watchdog reset method Lightly tested on dm365.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-19  David Brownell <dbrownell@users.sourceforge.net>

	* : SVF/XSVF: comment and whitespace fixes SVF: comment the predefined/default paths; make them static const SVF, XSVF: whitespace fixes, mostly so copyrights display sanely Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-19  Redirect 'Slash' NIL <redirect.slash.nil@gmail.com>

	* : MinGW: always use "-D__USE_MINGW_ANSI_STDIO" This is unfortunately needed to make stdio work like OpenOCD expects
	-- matching the ANSI-C standard, instead of MS-Windows.  I tested it in both MinGW-W64 on Vista 64 and MinGW-W32 on XP, and I
	don't see any adverse effects to enabling it for all MinGW versions.

2009-10-19  David Brownell <dbrownell@users.sourceforge.net>

	* : Doc: jtag_init must validate scan chain too Same requirement as like init_reset, and for the same reason: we
	need to start with a known and working state.

2009-10-19  David Brownell <dbrownell@users.sourceforge.net>

	* : Ignore openocd.exe for "git status"

2009-10-19  oyvind <oyvind@titan.(none)>

	* : Sync with official Jim Tcl repository.

2009-10-18  Dean Glazeski <dnglaze@gmail.com>

	* : SDRAM and clock configuration for the SAM9-L9260 board from
	Olimex

2009-10-17  David Brownell <dbrownell@users.sourceforge.net>

	* : Ignore two more generated files On Windows the name is "bin2char.exe".  All operating systems now
	have "xscale_handler.h".

2009-10-17  Redirect \"Slash\" NIL <redirect.slash.nil@gmail.com>

	* : jim-eventloop for MinGW-w64 Use JIM_WIDE_MODIFIER for the sscanf format, and apply it for
	MINGW32 as well as other Windows environments.  (Microsoft doesn't
	conform to the C99 standard, and uses "%I64d" not "%lld" for "long
	long".) NB: __MINGW32__ should work on both w32 and w64,.

2009-10-16  David Brownell <dbrownell@users.sourceforge.net>

	* : xscale: better fix for debug_handler.bin Generate a C struct with the data, and use that, instead of an
	assembly language file.  The assembly language causes issues on
	Darwin and MS-Windows, which don't necessarily use GNU AS; or if
	they do, don't necessarily use its ELF syntax.  It's also better in two other ways:  fewer global symbols; and the
	init-time size check gets optimized away at compile time.  (Unless
	it fails, in which case bigger chunks of the file vanish.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-14  David Brownell <dbrownell@users.sourceforge.net>

	* : portability updates Based on some patches from <redirect.slash.nil@gmail.com> for
	preliminary Win64 compilation.  More such updates are needed, but
	they need work.  Compile tested on 64 and 32 bit Linuxes, and
	Cygwin.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-14  Wookey <wookey@wookware.org>

	* : Fw: [PATCH] OpenRD board configuration Ofrwarded from Ron, who's not subscribed.  ----- Forwarded message from Ron <ron@debian.org> ----- From: Ron <ron@debian.org> Date: Wed, 14 Oct 2009 04:50:17 +1030 To:
	wookey@debian.org Subject: [PATCH] OpenRD board configuration
	X-Spam-Status: No, score=-3.6 required=4.5
		tests=BAYES_00,RCVD_IN_DNSWL_LOW autolearn=ham version=3.2.5 This piggybacks on the 'sheevaplug' layout which uses the same
	Kirkwood SoC.  Signed-off-by: Ron Lee <ron@debian.org>

2009-10-14  yvind Harboe <oyvind.harboe@zylin.com>

	* : Work in progress on arm11 reset. Assert srst.

2009-10-14  David Brownell <david-b@pacbell.net>

	* : Fix problems building xscale_debug.S

2009-10-13  Lennert Buytenhek <buytenh@wantstofly.org>

	* : fix detection of PLD instructions Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
	Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-13  David Brownell <dbrownell@users.sourceforge.net>

	* : cosmetic cleanup in TMS tables Cleanup comments and layout/whitespace in the TMS tables.  Table
	contents stayed the same (ignoring whitespace).  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-11  Yauheni Kaliuta <y.kaliuta@gmail.com>

	* : Do not replace virt2phys with the default one if it was assigned Signed-off-by: Yauheni Kaliuta <y.kaliuta@gmail.com>

2009-10-13  yvind Harboe <oyvind.harboe@zylin.com>

	* : Missing type for eCos.

2009-10-13  yvind Harboe <oyvind.harboe@zylin.com>

	* : Delete commented out code. Add a bit of error checking.

2009-10-13  yvind Harboe <oyvind.harboe@zylin.com>

	* : Propagate error from assert, deassert and halt on tcl target
	object.

2009-10-12  yvind Harboe <oyvind.harboe@zylin.com>

	* : More error propagation fixes.

2009-10-12  Wookey <wookey@wookware.org>

	* : Xilinx xcr3256.cfg basic config script

2009-10-12  yvind Harboe <oyvind.harboe@zylin.com>

	* : Propagate wDTR/rDTR failure immediately, otherwise it's followed
	up by timeout errors.

2009-10-12  yvind Harboe <oyvind.harboe@zylin.com>

	* : burst writes work fine. clean up junk.

2009-10-12  David Brownell <dbrownell@users.sourceforge.net>

	* : simplify XScale debug handler installation Load the XScale debug handler from the read-only data section
	instead of from a separate file that can get lost or garbaged.  This
	eliminates installation and versioning issues, and also speeds up
	reset handling a bit.  Plus some minor bits of cleanup related to loading that handler:
	comments about just what this handler does, and check fault codes
	while writing it into the mini-icache.  The only behavioral changes should be cleaner failure modes after
	errors during handler loading, and being a bit faster.  NOTE:  presumes GNU assembly syntax, with ".incbin"; and ELF,
	because of the syntax of the ".size" directive.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-12  yvind Harboe <oyvind.harboe@zylin.com>

	* : Merge commit 'origin/master'

2009-10-12  yvind Harboe <oyvind.harboe@zylin.com>

	* : Supply default reset_config statement to make target scripts
	useful standalone and provide sensible default

2009-10-11  David Brownell <dbrownell@users.sourceforge.net>

	* : xscale.c cleanup Declare almost everything as static.  Move stuff to remove most
	forward references.  Remove most forward declarations.  Warn if the
	unimplemented register functions get called.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-11  David Brownell <dbrownell@users.sourceforge.net>

	* : xscale minor cleanup Add a header comment referencing useful XScale specs.  Make most
	data static, and the tables readonly.  Scrub extra blank lines.
	Return fault codes from one routine.  Remove a needless NOP methood.  (BUGFIX) When we update R0, mark R0 as dirty/valid ... not R15/PC! Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-10  Wookey <wookey@wookware.org>

	* : Fix reset delays and tinker with ID's

2009-10-09  David Brownell <dbrownell@users.sourceforge.net>

	* : add documentation about reset customization We added two overridable procedures; document them, and the two jtag
	arp_* operations they necessarily expose.  Update the comment about the jtag_init_reset() routine; it's been
	obsolete for as long as it's had SRST support.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-09  yvind Harboe <oyvind.harboe@zylin.com>

	* : ARM11 error checking

2009-10-09  yvind Harboe <oyvind.harboe@zylin.com>

	* : Added tip in documentation on how to translate quirky syntax

2009-10-08  David Brownell <dbrownell@users.sourceforge.net>

	* : add overridable Tcl "init_reset" This abstracts the "jtag arp_init-reset" call into a method called
	from OpenOCD startup and reset processing.  Platforms which have different requirements for how such hard resets
	must be performed can now override "init_reset" instead of needing
	to rebuild custom hacked versions of the server.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-08  Rabeeh Khoury <rabeeh@marvell.com>

	* : Function to flash SheevaPlug u-boot sectors This function is used by the SheevaPlug installer to flash the erase
	and re-flash the U-Boot environment in the NAND Flash.

2009-10-08  David Brownell <dbrownell@users.sourceforge.net>

	* : prevent abort via polling during jtag_reset Observed:   openocd: core.c:318: jtag_checks: Assertion `jtag_trst == 0'
	  failed.  The issue was that nothing disabled background polling during calls
	from the TCL shell to "jtag_reset 1 1".  Fix by moving the existing
	poll-disable mechanism to the JTAG layer where it belongs, and then
	augmenting it to always pay attention to TRST and SRST.  Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-08  David Brownell <dbrownell@users.sourceforge.net>

	* : commit 4aacf01e194d09fb55dc759fc42ac42c8432c015 Author: Øyvind
	Harboe <oyvind.harboe@zylin.com> Date:   Thu Oct 8 15:43:51 2009
	+0200

2009-10-08  yvind Harboe <oyvind.harboe@zylin.com>

	* : Add .project to .gitignore

2009-10-08  yvind Harboe <oyvind.harboe@zylin.com>

	* : Update copyright statements. Make it easier to sync with Jim Tcl

2009-10-07  John Rigby <jcrigby@gmail.com>

	* : iMX25 target support Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>

2009-10-07  David Brownell <dbrownell@users.sourceforge.net>

	* : commit 03c9e48f88fa8b681b77c6c35d6da0a0e838a7e8 Author:
	dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60> Date:
	Thu Oct 8 00:13:50 2009 +0000

2009-10-07  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Force sane SRST and TRST initialization At least some FT2232 based adapters don't necessarily come up in the
	expected state, with SRST and TRST disabled.  Since other adapters
	could suffer the same problem, let's avoid needing to patch every
	driver and just force *all* adapters to initialize those values
	properly at server startup.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2824
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-10-07  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove much #ifdeffery around _DEBUG_JTAG_IO_ usage.  Have
	DEBUG_JTAG_IO() always trigger necessary warnings.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2822
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-10-07  David Brownell <dbrownell@users.sourceforge.net>

	* : commit f8c8d8bc72b2a87d2b2e3d583a052d8f0e5d22ea Author:
	dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60> Date:
	Wed Oct 7 16:15:21 2009 +0000

2009-10-07  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Note bug in handling of variables through command line
	parameters.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2819
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-10-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : first stab at imx35 reset init script git-svn-id: svn://svn.berlios.de/openocd/trunk@2817
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-10-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : add timeouts and fix syntax error handling of mrc/mcr commands.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2815
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-10-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : increase pause before reboot so web interface remains responsive
	when issuing a reboot of zy1000 git-svn-id: svn://svn.berlios.de/openocd/trunk@2813
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-10-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : 1.55 snapshot git-svn-id: svn://svn.berlios.de/openocd/trunk@2810
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-10-06  David Brownell <dbrownell@users.sourceforge.net>

	* : commit 0da2f750a1d437b50b21ac7ee766188a47b37fad Author:
	dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60> Date:
	Tue Oct 6 22:56:52 2009 +0000

2009-10-06  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Dragonite has the same EICE affliction as feroceon.  From: Nicolas Pitre <nico@fluxnic.net> git-svn-id: svn://svn.berlios.de/openocd/trunk@2807
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-10-06  David Brownell <dbrownell@users.sourceforge.net>

	* : commit 39b57471bfd92ef0d9a3aceb69f40c1335f5b62f Author: oharboe
	<oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60> Date:   Tue Oct 6
	08:10:57 2009 +0000

2009-10-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : stop using targetnum git-svn-id: svn://svn.berlios.de/openocd/trunk@2804
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-10-05  David Brownell <dbrownell@users.sourceforge.net>

	* : commit 64ec7f66a896fc4de6b472cffb6ef5740a76f61d Author:
	dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60> Date:
	Mon Oct 5 23:45:14 2009 +0000

2009-10-05  David Brownell <dbrownell@users.sourceforge.net>

	* : commit 7a57c316196f93c7e31b7d00eb9b52177ae874c6 Author:
	dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60> Date:
	Mon Oct 5 08:23:33 2009 +0000

2009-10-05  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add a new JTAG "setup" event; use for better DaVinci ICEpick
	support.  The model is that this fires after scanchain verification, when it's
	safe to call "jtag tapenable $TAPNAME".  So it will fire as part of
	non-error paths of "init" and "reset" command processing.  However
	it will *NOT* trigger during "jtag_reset" processing, which skips
	all scan chain verification, or after verification errors.  ALSO:  - switch DaVinci chips to use this new mechanism  - log TAP activation/deactivation, since their IDCODEs aren't
	 verified - unify "enum jtag_event" scripted event notifications  - remove duplicative JTAG_TAP_EVENT_POST_RESET git-svn-id: svn://svn.berlios.de/openocd/trunk@2800
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-10-05  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Update the NEWS file to cover more of the user-visible changes.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2798
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-10-02  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Updated reset event handling in omap3530 cfg git-svn-id: svn://svn.berlios.de/openocd/trunk@2796
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-10-02  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Make sure that DSCR_DTR_RX is not full before writing git-svn-id: svn://svn.berlios.de/openocd/trunk@2794
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-10-02  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Added asser_reset and deassert_reset for cortex_a8 git-svn-id: svn://svn.berlios.de/openocd/trunk@2792
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-10-02  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Minor ETB and ETM bugfixes and doc updates  - ETB     * report _actual_ hardware status, not just expected status     * add a missing diagnostic on a potential ETB setup error     * prefix any diagnostics with "ETB"  - ETM     * make "etm status" show ETM hardware status too, instead of       just traceport status (which previously was fake, sigh)  - Docs     * flesh out "etm tracemode" docs a bit     * clarify "etm status" ... previously it was traceport status     * explain "etm trigger_percent" as a *traceport* option ETM+ETB tracing still isn't behaving, but now I can see that part of
	the reason is that the ETB turns itself off almost immediately after
	being enabled, and before collecting any data.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2790
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Update release process documentation.  - Improve and clarify the wording of the introduction.  - Add section on version taggging.  - Some other minor corrections.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2788
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add numeric version tag support to release script.  The release process itself does not use this support yet, but it
	allows packagers to automate the process of managing their own tags,
	if they patch the source code before releasing binaries.  The
	release processes should be revised to incorporate this feature to
	support -rc packages.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2786
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add workaround to release script to update source code URL
	keyword.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2784
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix release script bugs after experience from 0.2.0: - The NEWS step failed due to an empty commit comment.  - The final release step would have failed, because the steps to
	  switch from the secure to insecure repository (and back again)
	  require both switch and a URL relocation steps git-svn-id: svn://svn.berlios.de/openocd/trunk@2782
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-30  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add DSCR_DTR_RX_FULL bit define git-svn-id: svn://svn.berlios.de/openocd/trunk@2780
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-30  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : michal smulski <michal.smulski@ooma.com> reset now works git-svn-id: svn://svn.berlios.de/openocd/trunk@2778
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-29  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : ARM11 command handling fixes  - Commands were supposed to have been "arm11 memwrite ..."    not "memwrite ..."  - Get rid of obfuscatory macros  - Re-alphabetize  - Add docs for "arm11 vcr" git-svn-id: svn://svn.berlios.de/openocd/trunk@2776
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-29  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Doc updates:  add section on target software changes, minor
	fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2774
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-29  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : ETB: cleanup needless symbol exports and forward decls.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2772
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-29  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : reentry assert git-svn-id: svn://svn.berlios.de/openocd/trunk@2770
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-29  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added t/nsrst_assert_width commands git-svn-id: svn://svn.berlios.de/openocd/trunk@2768
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : spelling fix git-svn-id: svn://svn.berlios.de/openocd/trunk@2766
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-27  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add list of JTAG adapter drivers with TAP_RESET statemove bug.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2764
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-27  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Don't provide invalid OMAP5912 IR capture value/mask attributes git-svn-id: svn://svn.berlios.de/openocd/trunk@2762
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-26  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Diagnostics tweaks for jtag_examine_chain() failure paths.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2760
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-26  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Streamline Capture-IR handling and integrity test.  Change the handling of the "-ircapture" and "-irmask" parameters to
	be slightly more sensible, given that the JTAG spec describes what
	is required, and that we already require that conformance in one
	place.  IR scan returns some bitstring with LSBs "01".   - First, provide and use default values that satisfy the IEEE spec.     Existing TAP configs will override the defaults, but those parms    are no longer required.   - Second, warn if any TAP gets set up to violate the JTAG spec.     It's likely a bug, but maybe not; else this should be an error.     Improve the related diagnostics to say which TAP is affected.  And associated minor fixes/cleanups to comments and diagnostics.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2758
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Michael Hasselberg <mh@open-engineering.de> target configuration
	files for Toshiba TX09 familiy git-svn-id: svn://svn.berlios.de/openocd/trunk@2756
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : When attaching GDB to OpenOCD, the target state is no longer
	affected.  Added gdb_sync feature that allows GDB to sync up to
	target state.  Issue "monitor gdb_sync" and the next stepi, will
	return immediately with updated register values to GDB.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2754
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-23  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : When setting up an ETM, cache its ETM_CONFIG register.  Then
	only expose the registers which are actually present.  They could be
	missing for two basic reasons:  - This version might not support them at all; e.g. ETMv1.1    doesn't have some control/status registers.  (My sample of    ARM9 boards shows all with ETMv1.3 support, FWIW.)  - The configuration on this chip may not populate as many    registers as possible; e.g. only two data value comparators    instead of eight.  Includes a bugfix in the "etm info" command:  only one of the two
	registers is missing on older silicon, so show the first one before
	bailing.  Update ETM usage docs to explain that those registers need to be
	written to configure what is traced, and that some ETM configs are
	not yet handled.  Also, give some examples of the kinds of
	constrained trace which could be arranged.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2752
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-23  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Initial ETM cleanups.  Most of these are cosmetic:  - Add a header comment  - Line up the ETM context struct, pack it a bit  - Remove unused context_id (this doesn't support ETMv2 yet)  - Make most functions static  - Remove unused string table and other needless lines of code  - Correct "tracemode" helptext Also provide and use an etm_reg_lookup() to find entries in the ETM
	register cache.  This will help cope with corrected contents of that
	cache, which doesn't include entires for non-existent registers.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2750
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-22  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix build issue under win32 (cygwin/msys) from svn r2746 git-svn-id: svn://svn.berlios.de/openocd/trunk@2748
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-22  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Make it easier to erase or protect through to the end of a (NOR)
	flash chip: allow passing "last" as an alias for the number of the
	last sector.  Improve several aspects of error checking while we're at it.  From: Johnny Halfmoon <jhalfmoon@milksnot.com> git-svn-id: svn://svn.berlios.de/openocd/trunk@2746
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-21  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove annoying end-of-line whitespace from doc/* files.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2744
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-21  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove annoying end-of-line whitespace from most src/* files;
	omitted src/httpd git-svn-id: svn://svn.berlios.de/openocd/trunk@2742
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-21  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Ensure that DaVinci chips can't start with a too-fast JTAG
	clock.  It can be sped up later, once it's known the PLLs are
	active.  Note that modern tools from TI all use adaptive clocking; and that
	if that's done with OpenOCD, "too fast" is also a non-issue.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2740
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-20  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Enhancement: stm32 flash protection error message This patch modifies an error message which, in its original state, I
	find somewhat unhelpful. So a small hint was added.  Signed-off-by: Johnny Halfmoon <jhalfmoon at milksnot.com> git-svn-id: svn://svn.berlios.de/openocd/trunk@2738
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-20  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Debug message updates:  - Shrink messaging during resets, primarily by getting rid of    "nothing happened" noise that hides *useful* information.   - Improve: the "no IDCODE" message by identifying which tap only    supports BYPASS; and the TAP event strings.  Related minor code updates:  - Remove two needless tests when examining the chain:  we know    we have a TAP, and that all TAPs have names.   - Clean up two loops, turning "while"s into "for"s which better    show what's actually being done.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2736
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-19  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Added  CPUDBG_WCR_BASE define git-svn-id: svn://svn.berlios.de/openocd/trunk@2734
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-19  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Reduced sleep time after reset git-svn-id: svn://svn.berlios.de/openocd/trunk@2732
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-19  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Minor behavior fixes for the two JTAG reset events (C/internal,
	and Tcl/external):  - Reorder so *both* paths (TCK/TMS or TRST) can enable TAPs with    ICEpick ... first C code flags TAPs that got disabled, then call    any Tcl code that might want to re-enable them.   - Always call the C/internal handlers when JTAG operations can be    issued; previously that wasn't done when TRST was used.  Plus some small cleanups (whitespace, strings, better messaging
	during debug and on some errors) to reset-related code.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2730
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-18  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Move Cortex A8 debug access initialisation from omap3530.cfg to
	cortex_a8.c git-svn-id: svn://svn.berlios.de/openocd/trunk@2728
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-18  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Tweak TCL reset script ... mostly improving descriptions of the
	various steps, but also calling [target names] only once.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2726
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-17  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Minor fixes to NAND code and docs Erase logic:  - command invocation     + treat "nand erase N" (no offset/length) as "erase whole chip
	    N" + catch a few more bogus parameter cases, like length == 0
	 (sigh) - nand_erase() should be static  - on error     + say which block failed, and if it was a bad block     + don't give up after the first error; try to erase the rest  - on success, say which nand device was erased (name isn't unique) Device list ("nand list"):  - say how many blocks there are  - split summary into two lines  - give example in the docs Doc tweaks:  - Use @option{...} for DaVinci's supported hardware ECC options For the record, I've observed that _sometimes_ erasing bad blocks
	causes failure reports, and that manufacturer bad block markers
	aren't always erasable (even when erasing their blocks doesn't
	trigger an error report).  git-svn-id: svn://svn.berlios.de/openocd/trunk@2724
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-17  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : michal smulski <michal.smulski@ooma.com> fix regression in
	jtag_add_pathmove() which broke arm11 in r1825. Other uses of
	jtag_add_pathmove are svn + xsvf + xscale...  git-svn-id: svn://svn.berlios.de/openocd/trunk@2722
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-17  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : srst_gates_jtag option. at91sam9260 needs retesting, and
	possibly srst_gates_jtag added to reset_config. Could i.MX27 be a
	case where srst does not pull trst, but really srst gates jtag
	clock? git-svn-id: svn://svn.berlios.de/openocd/trunk@2720
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-17  dbrownell <dbrownell@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Doc update:  mention how ARM's WFI instruction affects JTAG
	clocking by gating the core clock, and workarounds.  Most details
	are with the "halt" command, which is one of the first places this
	issue will be noticed.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2718
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-16  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Use a variable armv7a->debug_base instead of hardedcoded
	OMAP3530_DEBUG_BASE git-svn-id: svn://svn.berlios.de/openocd/trunk@2716
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-15  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Define debug_base, debug_ap, memory_ap in armv7a_common_t git-svn-id: svn://svn.berlios.de/openocd/trunk@2714
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-15  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Definy symbolic values for VA to PA address translation
	operations git-svn-id: svn://svn.berlios.de/openocd/trunk@2712
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-15  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added embedded ice programming while srst is asserted todo item git-svn-id: svn://svn.berlios.de/openocd/trunk@2710
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-14  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Cache invalidation when writing to memory git-svn-id: svn://svn.berlios.de/openocd/trunk@2708
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix email address git-svn-id: svn://svn.berlios.de/openocd/trunk@2706
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix warning git-svn-id: svn://svn.berlios.de/openocd/trunk@2704
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-13  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : More CortexA8 debug register definitions.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2702
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-12  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Dirk Behme <dirk.behme@googlemail.com> document post TAP reset
	event git-svn-id: svn://svn.berlios.de/openocd/trunk@2700
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-12  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> Cleanup some the downloaded
	ARM target algorithm code:  - Provide more complete disassembly of the DCC bulk write code  - Make code blocks "static const", in case GCC doesn't  - Fix some tabbing/layout issues  - Make some arm7_9_common.h flags be "bool" not "int"; and compact    the layout a bit (group most bools together) git-svn-id: svn://svn.berlios.de/openocd/trunk@2698
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : tap post reset event added. Allows omap3530 to send 100 runtest
	idle tickle's after a TAP_RESET.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2696
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Nicolas Pitre <nico@cam.org> put feroceon target definition at
	the end so to avoid a bunch of useless forward declarations.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2694
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : spelling mistake git-svn-id: svn://svn.berlios.de/openocd/trunk@2692
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : registering a target event twice caused infinite loop. Same bug
	as in jtag/core.c copy & pasted.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2690
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Alexei Babich <a.babich@rez.ru>  cleanup git-svn-id: svn://svn.berlios.de/openocd/trunk@2688
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-10  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : eol-style:native git-svn-id: svn://svn.berlios.de/openocd/trunk@2686
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-10  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Alexei Babich <a.babich@rez.ru> fix problems with unecessary
	tailend byte accesses. Use 16 bit access on tailend of a memory read
	if possible.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2684
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-09  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Rolf Meeser <rolfm_9dq@yahoo.de> This patch adds target
	algorithm support for those flash devices that do not support DQ5
	polling. So far they could only be programmed with host algorithm,
	but this was way too slow.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2682
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-09  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> Optionally shave time off
	the armv4_5 run_algorithm() code:  let them terminate using software
	breakpoints, avoiding roundtrips to manage hardware ones.  Enable this by using BKPT to terminate execution instead of "branch
	to here" loops.  Then pass zero as the exit address, except when
	running on an ARMv4 core.  ARM7TDMI, ARM9TDMI, and derived cores now
	set a flag saying they're ARMv4.  Use that mechanism in arm_nandwrite(), for about 3% speedup on a
	DaVinci ARM926 core; not huge, but it helps.  Some other algorithms
	could use this too (mostly flavors of flash operation).  git-svn-id: svn://svn.berlios.de/openocd/trunk@2680
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-08  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Report correct core instruction state for ARMv/A targets git-svn-id: svn://svn.berlios.de/openocd/trunk@2678
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> Provide an "armv7a
	disassemble" command.  Current omissions include VFP (except as
	coprocessor instructions), Neon, and various Thumb2 opcodes that are
	not available in ARMv7-M processors.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2676
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-07  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Improved handling of instruction set state, helps for debugging
	Thumb state.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2674
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : use "armv4_5 core_state arm" instead of soft_reset_halt, fewer
	side effects git-svn-id: svn://svn.berlios.de/openocd/trunk@2672
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Dirk Behme <dirk.behme@googlemail.com> Add default fall back
	freqency.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2670
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Matt Hsu <matt@0xlab.org> This patch simply enables the halting
	debug mode.  By enabling this bit, the processor halts when a debug
	event such as breakpoint occurs.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2668
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Matt Hsu <matt@0xlab.org> Tidy up the bit-offset operation for
	DSCR register git-svn-id: svn://svn.berlios.de/openocd/trunk@2666
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Claffey <dnclaffey@gmail.com> get rid of reset recursion git-svn-id: svn://svn.berlios.de/openocd/trunk@2664
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Claffey <dnclaffey@gmail.com> tested with the Atheros
	reference design "PB44" git-svn-id: svn://svn.berlios.de/openocd/trunk@2662
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-09-01  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fixes the incorrect info msg displayed during stellaris flash
	programming.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2660
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-31  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Warning fix git-svn-id: svn://svn.berlios.de/openocd/trunk@2658
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-31  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Ferdinand Postema <ferdinand@postema.eu> config script for the
	MMnet1001 module from Propox.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2656
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-30  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Dirk Behme <dirk.behme@googlemail.com> Fix typo in help text. It
	has to be 'production_test' instead of 'production' here.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2654
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-30  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> Remove duplicate check for
	flash write status.  Via code review by Steve Grubb
	<sgrubb@redhat.com>  Also minor fixes for the message from "fill":  the byte count is
	unsigned, not signed; and more importantly, print the real number of
	bytes written git-svn-id: svn://svn.berlios.de/openocd/trunk@2652
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-30  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> start phasing out integers
	as target IDs git-svn-id: svn://svn.berlios.de/openocd/trunk@2650
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> fix warnings git-svn-id: svn://svn.berlios.de/openocd/trunk@2648
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : restore ICE watchpoint registers when the *last* software
	breakpoint is removed git-svn-id: svn://svn.berlios.de/openocd/trunk@2646
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> ARM disassembly support for
	about five dozen non-Thumb instructions that were added after
	ARMv5TE was defined:  - ARMv5J "BXJ" (for Java/Jazelle)  - ARMv6 "media" instructions (for OMAP2420, i.MX31, etc) Compile-tested.  This might not set up the simulator right for the
	ARMv6 single step support; only BXJ branches though, and docs to
	support Jazelle branching are non-public (still, sigh).  ARMv6 instructions known to be mis-handled by this disassembler
	include:  UMAAL, LDREX, STREX, CPS, SETEND, RFE, SRS, MCRR2, MRRC2 git-svn-id: svn://svn.berlios.de/openocd/trunk@2644
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-27  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : arm11 single stepping wip - at least we know the next PC now git-svn-id: svn://svn.berlios.de/openocd/trunk@2642
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-27  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : refactor arm simulator to allow arm11 code to use it as well -
	no observable changes otherwise.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2640
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Matt Hsu <matt@0xlab.org> and Holger Hans Peter Freyther
	<zecke@selfish.org>  cortex-a8: Wait for the CPU to be
	halted/started With DCCR we are asking the CPU to halt, we should wait until the
	CPU has halted before proceeding with the operation.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2638
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Matt Hsu <matt@0xlab.org> and Holger Hans Peter Freyther
	<zecke@selfish.org> Only dap_ap_select when we are going to do a
	memory access in the fast reg case.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2636
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Matt Hsu <matt@0xlab.org> cortex_a8_exec_opcode is writing the
	ARM instruction into the ITR register but it will only be executed
	when the DSCR[13] bit is set. The documentation is a bit weird as it
	classifies the DSCR as read-only but the pseudo code is writing to
	it as well. This is working on a beagleboard.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2634
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Matt Hsu <matt@0xlab.org> and Holger Hans Peter Freyther
	<zecke@selfish.org> Before executing a new instruction wait for the
	previous instruction to be finished. This comes from the pseudo code
	of the cortex a8 trm.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2632
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added missing check on jtag_execute git-svn-id: svn://svn.berlios.de/openocd/trunk@2630
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : reduce arm11 output noise git-svn-id: svn://svn.berlios.de/openocd/trunk@2628
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> Clock updates/fixes for the
	Stellaris flash driver:  - Bugfixes:    * internal osc: it's *12* MHz (not 15 MHz) on _current_ chips       + except new Tempest parts where it's 16 MHz (and calibrated!)       + or some old Sandstorm ones, where 15 MHz was valid    * crystal config:       + read and use the crystal config, don't assume 6 MHz       + know when that field is 4 bits vs 5    * an RCC2 register may be overriding the original RCC       + more clock source options       + bigger dividers       + fractional dividers on Tempest (NYET handled)    * there's a 30 KHz osc on newer chips (for deep sleep)    * there's a 32768 Hz osc on newer chips (for hibernation)  - Cosmetic    * say "rev A0" not "vA.0", to match vendor docs    * don't always report master clock as an "estimate":       + give the error bound if it's approximate, like "±30%"       + else don't say anything    * fix whitespace and caps in some messages    * these are not AT91SAM chips!! Those clock issues might explain problems sometimes reported when
	writing to Stellaris flash banks; they affect write timings.  That 12-vs-15 MHz issue is problematic; there's no consolidated doc
	showing which chips (and revs!) have which internal oscillator
	speed.  It's clear that only older silicon had the
	faster-and-less-accurate flavor.  What's less clear is which chips
	are "old" like that.  Lightly tested, on a DustDevil part.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2626
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> Tweak disassembly commands:  For ARMv4/ARMv5:   - better command parameter error checking   - don't require an instruction count; default to one   - recognize thumb function addresses   - make function static   - shorten some too-long lines  For Cortex-M3:   - don't require an instruction count; default to one With the relevant doc updates.  --- Nyet done:  invoke the thumb2
	disassembler on v4/v5, to better handle branch instructions.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2624
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> More jtag_add_reset()
	cleanup: Unify the handling of the req_tlr_or_trst parameter.  Basically,
	JTAG TMS+TCK ops ("TLR") is always used ... unless TRST is a safe
	option in this system configuration.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2622
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> Accomodate targets which
	don't support various target-specific reset operations.  Maybe they
	can't; or it's a "not yet" thing.  Note that the assert/deassert operations can't yet trigger for OMAP3
	because resets currently include JTAG reset in all cases, resetting
	the ICEpick and thus disabling the TAP for Cortex-A8.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2620
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-25  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix build warnings - add svn props to recently added files armv7a.[ch] git-svn-id: svn://svn.berlios.de/openocd/trunk@2618
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : strange.... the code build and links w/Linux GCC target but
	fails w/arm-elf. The code was clearly broken as it was missing two
	extern's in the .h file...  git-svn-id: svn://svn.berlios.de/openocd/trunk@2616
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Ferdinand Postema <ferdinand@postema.eu> increase reset delay to
	fix regression from 2600 to 2604 git-svn-id: svn://svn.berlios.de/openocd/trunk@2614
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Audrius Urmanavičius <didele.deze@gmail.com> Latest source
	(R2606) does not compile under Windows+Cygwin - fails with error
	about possibly uninitialized use of variable 'ch'.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2612
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : use cortex_a8 instead of cortex_m3 git-svn-id: svn://svn.berlios.de/openocd/trunk@2610
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell Subset of Cortex-A8 support from Magnus:  create
	an armv7a file and seed it with DAP access support using the current
	ADIv5 code.  (With tweaks and cleanup from Øyvind and Dave.) The ARMv7-AR architecture manual is not publicly available (even in
	subset form like the ARMv7-M spec), so it's hard to distinguish
	between the Cortex-A8 implementation and the ARMv7-A architecture.  The register set presumably is architectural, and so it's stored
	here; it's like earlier ARMs, with small additions.  Ditto the
	instruction set, though Thumb2 support is used (extending Thumb
	support from ARMv6 with more 32-bit instructions) and there's this
	ThumbEE thing too.  There is a new "debug monitor" mode, not yet
	fully addressed here, to support debugging in environments (like
	motor control) where halting debug mode is inadvisable.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2608
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Steve Grubb <sgrubb@redhat.com> fix various and sundry leaks git-svn-id: svn://svn.berlios.de/openocd/trunk@2606
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Pieter Conradie <Pieter.Conradie@psitek.com> shuffle things
	around to the right spots. Should have been done in previous commit.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2604
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Pieter Conradie <Pieter.Conradie@psitek.com> Scripts for Atmel
	AT91SAM7S256 and AT91SAM9260 git-svn-id: svn://svn.berlios.de/openocd/trunk@2602
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-20  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Piotr Ziecik <kosmo@semihalf.com> This patch adds handling blank
	characters between hex digits in SVF file, making OpenOCD compatible
	with files generated by Altera Quatrus II 9.0.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2600
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-20  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>More Thumb2 disassembly:   ARMv7-M: A5.3.6 Load/store dual or exclusive, table branch GCC will generate the table branch instructions, usually with
	inlined tables that will confuse this disassembler.  LDREX and STREX
	are not issued by GCC without inline assembly.  This means all Thumb2 instructions implemented by Cortex-M3 can now
	be disassembled.  Cortex-A8 cores support more Thumb2 instructions,
	but most of those aren't yet publicly documented.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2598
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>Fix some command helptext:  - spell "address" right  - list bp/wp params as optional And make those source lines wrap at sane margins.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2596
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-18  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell [david-b@pacbell.net]: Simplify dumping of register lists by only printing cached values if
	they are marked as valid.  Most of the time, they are invalid; so
	printing *any* value is just misleading.  Note that for ARM7 and ARM9 most EmbeddedICE registers (except for
	debug status) could be cached most of the time; and their register
	cache isn't maintained properly (many accesses seem to bypass that
	cache code).  git-svn-id: svn://svn.berlios.de/openocd/trunk@2594
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-18  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add cfg file for Amontec JTAGKey2 jtag interface git-svn-id: svn://svn.berlios.de/openocd/trunk@2592
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-18  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Jonas Horberg [jhorberg@sauer-danfoss.com] Change jtag_rclk
	behaviour so it can be called before the interface init function git-svn-id: svn://svn.berlios.de/openocd/trunk@2590
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> Add "cortex_m3
	vector_catch" command and docs.  One minor issue with this is that
	the core debug support uses this mechanism, then trashes its state
	over reset.  Users can Work around that (for now) by re-assigning
	the desired config after reset.  Also fixes "target halted due to target-not-halted" goof.  When we
	can't describe the reason using OpenOCD's limited vocabulary, say
	"reason undefined" instead of saying it's not halted.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2588
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> Several of the ARMv7M
	registers are 8 bits or less; don't display them as 32 bits unless
	that's their true size.  (Removes some confusion.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2586
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Xiaofan Chen <xiaofanc@gmail.com> Split LM3S811 config file into
	target file and board file git-svn-id: svn://svn.berlios.de/openocd/trunk@2584
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Xiaofan Chen <xiaofanc@gmail.com> Add config file for
	TI-Luminary LM3S1968 chip and EK-LM3S1968 board git-svn-id: svn://svn.berlios.de/openocd/trunk@2582
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added note w/reference to discussion on whether or not arm11
	code is broken or not.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2580
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-07  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Warn about anyone using
	"jtag_speed" commands; that command is obsolete, and will someday be
	removed.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2578
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-07  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Ferdinand Postema [ferdinand@postema.eu] - fix vector catch issues with certain ARM9 cores - AT91SAM9260 and
	STR9 git-svn-id: svn://svn.berlios.de/openocd/trunk@2576
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-06  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Gary Carlson [gcarlson@carlson-minot.com]: - revert patch from rev1507 as it was causing reset issues with arm9
	cores git-svn-id: svn://svn.berlios.de/openocd/trunk@2574
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-08-06  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : michal smulski <michal.smulski@ooma.com>: Fix ARM11 half-word bulk memory read and write.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2572
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-27  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix NPE in GDB_EVENT_END as logforwarding was not disabled early
	enough git-svn-id: svn://svn.berlios.de/openocd/trunk@2570
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> More testcase work:        A5.3.11 Data processing (shifted register) The usual kinds of problems; the most noteworthy were that the "S"et
	flags bit was mis-handled in these instructions.  --- This is the
	last patch from a quickie set of tests covering all encodings of the
	instructions with 32-bit opcodes.  There may be some corner cases
	left, plus the instructions that aren't yet handled, but the Thumb2
	disassembler is no longer just "lightly" tested with GCC output ...
	the new code paths have mostly been verified.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2568
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> More fixes from test cases:        A5.3.8 Load halfword, unallocated memory hints It's mostly the usual sort of bitmasking goofage and getting the
	width specs right.  In one case an older x86 GCC generated bad code
	unless I structred a conditional differently (sigh).  git-svn-id: svn://svn.berlios.de/openocd/trunk@2566
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> More instruction decoding
	fixes based on test cases, covering ARMv7-M arch manual:  A5.3.1 Data processing (modified immediate)  A5.3.3 Data processing (plain binary immediate)  A5.3.4 Branches and miscellaneous control and other (immediate) encodings referenced there.  Several of these
	just tweak the new syntax ("Unified" ARM/Thumb: UAL) but there were
	a few bugs too.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2564
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Andreas Fritiofson <andreas.fritiofson@gmail.com> I noticed
	there are a few checks for (rt == 0xf) even though that case is
	handled with an early return at the top of the function.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2562
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-23  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> thumb2 disassembly for Load
	byte, memory hints git-svn-id: svn://svn.berlios.de/openocd/trunk@2560
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-23  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> fix warnings git-svn-id: svn://svn.berlios.de/openocd/trunk@2558
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-22  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Stefano Voulaz <s.voulaz@projecktstudio.com> first cut
	samsung_s3c2450 git-svn-id: svn://svn.berlios.de/openocd/trunk@2556
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-21  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Clean up treatment of registers in ARMv7-M and Cortex-M3.   - At the arch level:     * Just list registers and names; don't impose core-specific       policy about how they are accessed.      * Each register has a symbol.      * Remove the register mode field (irrelevant to debugger)  - At the core/implementation level:     * Just map the registers to their relevant access methods;       don't require the arch level to say how that should work       (cores other than Cortex-M3 could do it differently).      * Don't use undefined bits from register 20.      * Use register IDs that are part of the ARMv7-M interface.  In short, there's now a real distinction between the arch and core
	layers.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2554
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-21  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Revert parts of the previous ARMv7-M register patch.  It turns out
	that part of the issue is a documentation problem for the Cortex-M3
	r1 parts. So for the rest, simpler fixes are possible (in followup
	patch).  git-svn-id: svn://svn.berlios.de/openocd/trunk@2552
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : aduc flash problems have been resolved git-svn-id: svn://svn.berlios.de/openocd/trunk@2550
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added item to come up with slick new 32 bit jtag_add_xxx() API git-svn-id: svn://svn.berlios.de/openocd/trunk@2548
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : microscopic white space fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2546
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-16  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Magnus Lundin <lundin@mlu.mine.nu>, Oyvind Harboe
	<oyvind.harboe@zylin.com>, David Brownell <david-b@pacbell.net>: Move the dap command handler implementations to arm_adi_v5.c,
	leaving just thin wrappers in armv7m.c.  There should be no change
	in functionality here.  (From Magnus.) Minor style cleanup:  whitespace, line length, etc.  Update spec
	references to use docs which are currently available.  (From Dave.) git-svn-id: svn://svn.berlios.de/openocd/trunk@2544
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-15  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: More 32-bit Thumb2 instruction decoding: 	A5.3.7 Load word git-svn-id: svn://svn.berlios.de/openocd/trunk@2542
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-15  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: More 32-bit instruction decoding: 	A5.3.11 Data processing (shifted register) git-svn-id: svn://svn.berlios.de/openocd/trunk@2540
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-15  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: More instructions decoded: 	A5.3.14 Multiply, and multiply accumulate 	A5.3.15 Long multiply, long multiply accumulate, divide The EABI requires *adjacent* register pairs, but the long multiply
	ops can use any pair of registers; interesting.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2538
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-15  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Print old-style Thumb NOP instructions as such.  (GCC uses "mov r8,
	r8" instead of the architected NOP which is new in Thumb2.) git-svn-id: svn://svn.berlios.de/openocd/trunk@2536
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-15  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Make the Thumb2 disassembler handle more 32-bit instructions:   A5.3.3 Data processing (plain binary immediate) These use mostly twelve bit literals, but there are also bitfield
	and saturated add primitives.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2534
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-15  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Make the Thumb2 disassembler handle a bunch of 32-bit instructions:   A5.3.4 Branches and miscellaneous control Note that this shifts some responsabililty out of helper functions,
	making the code and layout simpler for 32-bit decoders:  they only
	need to know how to format the instruction and its parameters.  Also, technical note:  with this patch, Thumb1 decoders could now
	call the Thumb2 decoder if they wanted to get nicer treatment of the
	exiting 32-bit B/BLX instructions.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2532
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-15  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Initial support for disassembling Thumb2 code.  This works only for
	Cortex-M3 cores so far.  Eventually other cores will also need
	Thumb2 support ... but they don't yet support any kind of
	disassembly.   - Update the 16-bit Thumb decoder:      * Understand CPS, REV*, SETEND, {U,S}XT{B,H} opcodes added        by ARMv6.  (It already seems to treat CPY as MOV.)      * Understand CB, CBNZ, WFI, IT, and other opcodes added by        in Thumb2.   - A new Thumb2 instruction decode routine is provided.       * This has a different signature:  pass the target, not the        instruction, so it can fetch a second halfword when needed.         The instruction size is likewise returned to the caller.       * 32-bit instructions are recognized but not yet decoded.   - Start using the current "UAL" syntax in some cases.  "SWI" is    renamed as "SVC"; "LDMIA" as "LDM"; "STMIA" as "STM".   - Define a new "cortex_m3 disassemble addr count" command to give    access to this disassembly.  Sanity checked against "objdump -d" output; a bunch of the new
	instructions checked out fine.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2530
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-15  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : retire Eclipse settings, charset will be set elsewhere.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2528
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> mention udev, and correct
	D2XX speed mentions git-svn-id: svn://svn.berlios.de/openocd/trunk@2526
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : 1.54 snapshot git-svn-id: svn://svn.berlios.de/openocd/trunk@2523
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-14  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Bump minor version and add tag: Bump minor package version
	number: 0.2.0 -> 0.3.0 Add '-in-development' version tag: 0.3.0 ->
	0.3.0-in-development git-svn-id: svn://svn.berlios.de/openocd/trunk@2521
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-14  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Improve the release script before 0.2.0: 1) Only archive NEWS file on major and minor relesae, not bug-fixes.  2) Switch back to correct development branch during final release
	step.  3) Add do_svn_switch helper to ensure package variables are
	reloaded.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2516
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-14  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Make the parport-ppdev option enabled by default.  This may
	require giving --disable-parport-ppdev to configure on some
	platform(s).  git-svn-id: svn://svn.berlios.de/openocd/trunk@2514
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-12  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Xiaofan Chen <xiaofanc@gmail.com> document my experiment with
	MinGW cross build.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2512
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-12  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Magnus Lundin  Thc cortex_m3_poll function does not identify
	that a target is running unless we transition from RESET.  This patch correctly identifies a running target.  Patch made a tad more palatable by David Brownell
	<david-b@pacbell.net> git-svn-id: svn://svn.berlios.de/openocd/trunk@2510
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-12  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> Mention how parallel clock
	voting implementations of RTCK work, and reference TI's free VHDL
	code.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2508
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-10  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : wrote up workaround for xscale/debug_handler.bin bug git-svn-id: svn://svn.berlios.de/openocd/trunk@2506
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-10  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> split EK board support out
	from the target CPU support .  git-svn-id: svn://svn.berlios.de/openocd/trunk@2504
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-08  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add section to provide some documentation for cross-compiling.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2502
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-08  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add comments to top-level files to "excuse" their Doxygen
	markup.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2500
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix formatting of xscale bug entry(learning every day) git-svn-id: svn://svn.berlios.de/openocd/trunk@2498
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : typo in comment git-svn-id: svn://svn.berlios.de/openocd/trunk@2496
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : i.MX27 reset problems fixed & update remaining reset problems
	notes git-svn-id: svn://svn.berlios.de/openocd/trunk@2494
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : srst pulls trst according to Freescale docs for i.mx27 git-svn-id: svn://svn.berlios.de/openocd/trunk@2492
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Use reference to mailing list for known arm926ejs bugs rather
	fill The List with lots of details git-svn-id: svn://svn.berlios.de/openocd/trunk@2490
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix return value for "reset" and "runtest" command. Found by
	code inspection.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2488
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : more arm926ejs bugs git-svn-id: svn://svn.berlios.de/openocd/trunk@2486
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> Update docs to say that
	"arm7_9 dbgrq enable" is the default on ARM9 cores, and update the
	DaVinci config files so they no longer explicitly specify it.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2484
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-06  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix build when using a cross compiler - do not try and run any
	host tools - add missing types.h when platform does not contain elf.h git-svn-id: svn://svn.berlios.de/openocd/trunk@2482
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : a bit more debug output for translation of invalid mode numbers git-svn-id: svn://svn.berlios.de/openocd/trunk@2480
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix regression in "step" command introduced in 2190 git-svn-id: svn://svn.berlios.de/openocd/trunk@2478
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-06  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Update Release Script documentation to reflect current
	implementation.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2476
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-06  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add NEWS file for the 0.2.0 release.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2474
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-06  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Ferdinand Postema <ferdinand@postema.eu>: Updates to private TAP state tables in amtjtagaccel interface
	driver.  The first change is the neccesary one to correct a long-standing bug
	that caused the IDCODE to be shifted by one bit too many.  This was
	caused by an incorrect path from state RESET to state DRSHIFT.  The value of those 2 bytes were 0x8a and 0x04. This means that the
	bitstream to do this transition is 0b 00100 01010 (send LSB first).
	This will bring you from the reset state to the shift state;
	however, you enter the shift-state twice, which explains why the
	ID-CODE that will be read next will be shifted 1 bit.  The fix
	changes these to 0x05 and 0x00.  This will send the bitstream 0b
	00101 (send LSB first).  This will bring the TAP controller from the
	RESET state to the DRSHIFT state directly, without entering the
	DRSHIFT state twice.  After checking the whole table, two other transitions were found
	that could be optimized (5 bits in stead of 10 bits).  Summary off all changes:   From   To       Old values  Old Bitstream  New values  New
	  Bitstream  Remarks ----   -------  ----------  -------------
	  ----------  -------------  ------- RESET  DRSHIFT  0x8a 0x04
	  0b00100 01010  0x05 0x00   0b00101        1,2 IDLE   DRSHIFT  0x85
	  0x08   0b01000 00101  0x04 0x00   0b00100        2 IDLE   IRSHIFT
	0x8b 0x08   0b01000 01011  0x06 0x00   0b00110        2 [1] Fixes the IDCODE bug [2] Optimization git-svn-id: svn://svn.berlios.de/openocd/trunk@2472
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : 10ms timeout check on cp15 read/write git-svn-id: svn://svn.berlios.de/openocd/trunk@2470
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-06  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix maintainer-clean target in doc directory.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2468
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added known problem w/line number's being off in syntax errors
	for target reset events git-svn-id: svn://svn.berlios.de/openocd/trunk@2466
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : human readable error message upon invalid arguments git-svn-id: svn://svn.berlios.de/openocd/trunk@2464
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-04  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Major update to release process documentation: - Provide overview of OpenOCD versioning schema.  - Outline responsibilities and authority of the release manager.  - Explain the need for flexibility in the release schedule.  - Add and refine the release process steps.  - Include tutorials for using new release script.  - Many more improvements, too numerous to list.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2462
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Xiaofan Chen <xiaofanc@gmail.com> With this patch, OpenOCD can
	talk to my Analog Device Eval-ADuC7060 eval board.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2459
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-02  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add AUTHORS for 0.2.0 release.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2457
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-02  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove vim editor commands from TCL files.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2455
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-02  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Commit first draft of release process documentation.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2453
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : zy1000 1.53 snapshot git-svn-id: svn://svn.berlios.de/openocd/trunk@2451
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-02  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: More minor improvements to README to help polish the 0.2.0 release: - Add note about Ubuntu 8.04 (in lieu of starting a README.Linux
	file).  - Fix introductory paragraph to Bulding OpenOCD - Remove some vestigial texinfo markup.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2448
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-02  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Restore some whitespace that got clobbered by over-aggressive
	whitepace eradication patches a while back.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2446
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-01  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add missing copyright header to target_type.h.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2444
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-01  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Update TODO list to relect 0.2.0 release.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2442
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-07-01  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add stm32 connectivity line tapid to stm32.cfg git-svn-id: svn://svn.berlios.de/openocd/trunk@2440
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove at91sam3.h from flash.c; use extern like other drivers.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2438
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Provide some useful information in README file, rather than
	punting.  Add some text to introduce the project to new users.  Move packaging, configuration, and compilation of OpenOCD out of the
	User's Guide and into README, where it can be used by users before
	configuring and compiling the documentation.  Improve notes about required Subversion repository build steps.  Add
	reference to the standard GNU INSTALL file.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2436
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-30  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - remove cygwin build warnings in at91sam3.c git-svn-id: svn://svn.berlios.de/openocd/trunk@2434
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove executable bits from at91sam3 configuration files.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2432
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add svn:eol-style properties missed in last commit.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2430
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Add "jtag names" command, mirroring "target names" but returning TAP
	names instead of target names.  This starts letting TAPs be
	manipulated in scripts ... much like what works now for targets.  It's a bit limited just yet, since "jtag cget $TAPNAME" doesn't
	expose all TAP attributes.  "$TARGETNAME cget" is more functional.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2428
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix doxygen 'undocumented parameter' warnings in membuf.h.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2426
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix doxygen warning in jtag.h caused by a changed parameter
	name.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2424
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix @file documentation blocks in new interfaces source files.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2422
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix logger.pl script to avoid spurious empty line in some cases.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2420
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-29  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Minor bugfix ... previous version was tested *with* ICEpick active.
	The "-disable" can swap with "-enable"; but not with an empty
	string.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2418
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-29  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Improve the PXA255 target config:  move all that board-specific
	setup to the pxa255_sst board.cfg, to which it evidently belongs
	(it's the only PXA255 board now included).  Provide the PXA255 JTAG id from Intel docs, and add a comment about
	how this chip is now EOL'd (last orders taken).  Note that I still can't get my old PXA255 board to work.  There's
	something broken in the reset sequence, which is preventing the TAP
	from coming up at all.  Old mailing list posts suggest this is a
	longstanding bug...  git-svn-id: svn://svn.berlios.de/openocd/trunk@2416
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-29  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Minor fixup to the User's Guide, primarily related to the handful of
	commands defined in "startup.tcl"; "help" was not previously
	documented.  Also, be more consistent about "Config Command" definitions (and to
	be explicit about that doc convention).  git-svn-id: svn://svn.berlios.de/openocd/trunk@2414
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> various missing commands git-svn-id: svn://svn.berlios.de/openocd/trunk@2412
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-28  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : A bit more log detail about connections comming and going git-svn-id: svn://svn.berlios.de/openocd/trunk@2410
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-27  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add Breakpoint/Watchpoint unique ID to help debug hardware debug
	register leakage git-svn-id: svn://svn.berlios.de/openocd/trunk@2408
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-27  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Switch to strotk() grr....  git-svn-id: svn://svn.berlios.de/openocd/trunk@2406
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> Add a short chapter on
	boundary scan support, which currently just documents the SVF and
	XSVF commands.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2404
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Oleksandr Tymoshenko <gonzo@bluezbox.com> simple watchpoint
	support for MIPS32/EJTAG (no value comparation yet).  git-svn-id: svn://svn.berlios.de/openocd/trunk@2402
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> Fix formatting bug in
	at91sam7 doc added with the at91sam3 support; and some formatting
	issues with sam7 and stm32 keyword params.  Tweak at91sam3 docs.  Remove ninth nibble from flash bank addresses,
	clarify "at91sam3 show" variants and that the flash bank layout is
	not needed as a parameter (unlike with sam7); formatting fixes.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2400
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-24  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove whitespace at end of lines, step 2.  - Replace '\s*$' with ''.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2398
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-24  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove whitespace that occurs before ')'.  - Replace '[ \t]*[)]' with ')'.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2396
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-24  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Fixes '[<>]' whitespace - Replace '\(\w\)\([<>]\)\(\w\)' with '\1 \2 \3'.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2394
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-24  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Fixes '+' whitespace - Replace '\(\w\)\(+\)\(\w\)' with '\1 \2 \3'.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2392
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-24  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Fixes '==' whitespace - Replace '\(\w\)\(==\)\(\w\)' with '\1 \2 \3'.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2390
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-24  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Replace 'switch(' with 'switch ('.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2388
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-24  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Replace 'if(' with 'if ('.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2386
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-24  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix end-of-line style properties on newly added files.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2384
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-24  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add quick target - full cygwin builds take a long long long
	time, this shortens the edit/build/debug cycle git-svn-id: svn://svn.berlios.de/openocd/trunk@2382
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-23  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove whitespace at end of lines, step 2.  - Replace '\s*$' with ''.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2380
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-23  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Replace '){' with ') {'.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2378
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-23  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove whitespace that occurs after '('.  - Replace '([ \t]*' with '('.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2376
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-23  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Fixes '[|]' whitespace - Replace ')\([|]\)(' with ') \1 ('.  - Replace ')\([|]\)\(\w\)' with ') \1 \2'.  - Replace '\(\w\)\([|]\)(' with '\1 \2 ('.  - Replace '\(\w\)\([|]\)\(\w\)' with '\1 \2 \3'.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2374
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-23  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Fixes '=' whitespace - Replace ')\(=\)\(\w\)' with ') \1 \2'.  - Replace '\(\w\)\(=\)(' with '\1 \2 ('.  - Replace '\(\w\)\(=\)\(\w\)' with '\1 \2 \3'.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2372
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-23  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Fixes '<<' whitespace - Replace ')\(<<\)\(\w\)' with ') \1 \2'.  - Replace '\(\w\)\(<<\)(' with '\1 \2 ('.  - Replace '\(\w\)\(<<\)\(\w\)' with '\1 \2 \3'.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2370
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-23  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Fixes '<=' whitespace - Replace '\(\w\)\(<=\)\(\w\)' with '\1 \2 \3'.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2368
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-23  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Fixes '&&' whitespace - Replace ')\(&&\)(' with ') \1 ('.  - Replace '\(\w\)\(&&\)(' with '\1 \2 ('.  - Replace '\(\w\)\(&&\)\(\w\)' with '\1 \2 \3'.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2366
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-23  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Fixes '[+]=' whitespace - Replace '\(\w\)\([+]=\)(' with '\1 \2 ('.  - Replace '\(\w\)\([+]=\)\(\w\)' with '\1 \2 \3'.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2364
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-23  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Fixes '-=' whitespace - Replace '\(\w\)\(-=\)(' with '\1 \2 ('.  - Replace '\(\w\)\(-=\)\(\w\)' with '\1 \2 \3'.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2362
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-23  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Replace 'for(' with 'for ('.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2360
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-23  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Replace 'while(' with 'while ('.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2358
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-23  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : update w/missing eCos definitions after latest round of compiler
	formatting warnings fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2356
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-22  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: This should be my last significant update of the User's Guide for
	this release.  Mostly it's a rework of the config file chapter's
	presentation of board and target config files.   - Give the new path for scripts!  - Move board-config material out of the target-config section  - Add more board-config info, notably for reset-init events  - Link out of the board-config section to NAND, NOR, and Reset
	 chapters - Emphasize target input vs. output naming conventions  - Other textual improvements Plus some other updates, like adding my copyright (now that I've
	basically rewritten much of this).  git-svn-id: svn://svn.berlios.de/openocd/trunk@2354
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-22  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> Make the Hitex
	STM32-PerformanceStick board config behave better: source the STM32
	target config instead of using a private clone git-svn-id: svn://svn.berlios.de/openocd/trunk@2352
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix break caused by r2208 when using --pipe option - issue is gdb stdin buffer gets full before we redirect openocd
	output git-svn-id: svn://svn.berlios.de/openocd/trunk@2350
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Oleksandr Tymoshenko <gonzo@bluezbox.com>: Resume command works only if resume address is provided.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2348
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2346
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2344
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2342
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2340
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2338
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2336
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2334
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2332
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2330
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2328
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2326
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2324
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2322
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2320
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2318
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2316
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2314
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2312
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2310
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2308
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2306
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2304
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2302
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2300
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 printf() -Werror fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@2298
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-21  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : C99 Type updates, include inttypes.h - it is catagorically
	required git-svn-id: svn://svn.berlios.de/openocd/trunk@2296
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-19  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove editor preferences from source files.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2294
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-19  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Paulius Zaleckas <paulius.zaleckas@gmail.com>: This is minimal patch to support FA526 ARMv4 compatible core.  Since
	it is very similar to ARM920T I tried to reuse as much code as
	possible.  CPU and board configs will follow soon.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2292
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix jtag_add_callback() args. The first argument is nothing
	special, it's just another generic argument.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2290
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : less warnings git-svn-id: svn://svn.berlios.de/openocd/trunk@2288
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-18  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Oyvind Harboe <oyvind.harboe@zylin.com>: Ecos uses sys/types.h not stdint.h.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2286
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-18  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Update Style Guide documentation to explain basic type rules.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2284
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-18  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Transform 'u64' to 'uint64_t' - Replace '\([^_]\)u64' with '\1uint64_t'.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2282
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-18  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Transform 'u32' to 'uint32_t' in src/flash.  - Replace '\([^_]\)u32' with '\1uint32_t'.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2280
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-18  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Transform 'u32' to 'uint32_t' in src/target/arm* - Replace '\([^_]\)u32' with '\1uint32_t'.  - Replace '^u32' with 'uint32_t'.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2278
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-18  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Transform 'u8' to 'uint8_t' - Replace '\([^_]\)u8' with '\1uint8_t'.  - Replace '^u8' with 'uint8_t'.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2276
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-18  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Transform 'u8' to 'uint8_t' in src/target - Replace '\([^_]\)u8' with '\1uint8_t'.  - Replace '^u8' with 'uint8_t'.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2274
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-18  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Clean up the PLD files:  - Get rid of some extraneous whitespace  - Make various functions static  - Wrap overlong lines git-svn-id: svn://svn.berlios.de/openocd/trunk@2272
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-18  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Take a whack at providing some texinfo style docs.  Mostly it's just
	basic "how 2 write sane dox" stuff.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2270
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-17  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : dummy driver now works under eCos git-svn-id: svn://svn.berlios.de/openocd/trunk@2268
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-17  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Fix for a goofy "board" config ... reuse target/pxa270.cfg instead
	of using a private copy.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2266
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-17  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Let jtag_call_event_callbacks() behave when the callback removes
	itself.  Oddly, this crashed on x86_32 but not x86_64.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2264
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-17  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix compilation for Ubuntu 9.04 on x86-64 when using
	--enable-httpd.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2262
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-17  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Ensure range errors are reported only when errno indicates one
	occurred.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2260
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-17  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add argument parsing errors in command.h, use in parse_type
	routines.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2258
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-17  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Convert core parse_type implementations to check for underflow
	errors.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2256
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-17  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Update parse_type macro definitions to allow re-use with signed
	types.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2254
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-16  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Fix a bug preventing ICEpick "enable that TAP" code from working:
	the "runtest" command wrongly finished with a JTAG reset, discarding
	the work the TAP enable handler just finished!  Instead, JTAG should
	stay in RUN/IDLE state.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2252
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-16  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Tighten error handling on TAP enable/disable paths a bit:  - Don't enable/disable unless it's necessary.  Those event    handlers could have nasty side effects...   - Don't *succeed* enables/disables if there was no code which    could have implemented that action.  This prevents bugs like    wrongly acting as if the scan chain changed.   - Minor whitespace cleanup in enable/disable command code.  The big problem is still the lack of code to verify scan chains were
	actually updated as requested; this adds a comment on that.  I
	suspect the best we can do near term will be to verify IDCODE.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2250
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-16  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Distributing FTDI's "ftd2xx" library with OpenOCD violates the
	OpenOCD license (GNU GPLv2 with no exceptions).  Make that clear where that build option is presented, and don't
	describe the FTDI libraries as an option for any packager.  (It's
	fine for personal use, of course.) Plus some related clarifications:  libftdi version 0.16 for the new
	FT2232H chips (for RTCK and high speed USB); the Amontec drivers are
	just ftd2xx variants.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2248
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-16  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Doc update:  say "jtag newtap ... -disable" records the state after
	exiting the RESET state, matching the only implementation we're
	working with so far (TI ICEpick-C).  Matching code updates.  Now we can be sure that the "enabled" flag
	value is correct after JTAG resets.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2246
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-16  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Minor jtag cleanup:  - remove hidden assumption about JTAG event numbering  - move function declarations to a header  - some end'o'line whitespace  - use "calloc" not "malloc + memset" git-svn-id: svn://svn.berlios.de/openocd/trunk@2244
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-15  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Add another board ... OMAP2420 "H4" board.  This won't be very
	widely used with OpenOCD, but with mainline support in both U-Boot
	and Linux it at least makes for a more complete set (and another
	testcase).  This is incomplete support in several respects.  The ARM11 support
	is not very deep yet; most registers aren't available, and the ETM
	can't be hooked up.  Plus, there's no script for OMAP-specific stuff
	like setting up the SDRAM controller.  Eventually the same NAND
	controller driver should work with OMAP2 and OMAP3.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2242
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-13  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: OpenOCD doesn't actually *need* to be keeping all TCP ports active
	... creating security issues in some network configs.  Instead, let config file specify e.g. "tcl_port 0" (or gdb_port,
	telnet_port) to disable that particular remote access method.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2240
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-13  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Improve handle_profile_command argument parsing: - Use parse_uint to ensure timeout value parses properly.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2238
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-13  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Cleanup and improve handle_wp_command and handle_rwp_command: - Simplify argument parsing logic using switch statement.  - Use parse_u32 to ensure all values parse properly.  - Return syntax error when mode argument fails to parse.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2236
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-13  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Improve handle_verify_image_command_internal command argument
	handling: - Use parse_u32 to ensure address parses properly.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2234
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-13  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Improve handle_load_image_command argument parsing: - Use parse_u32 to ensure base/min/max addresses parse properly.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2232
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-13  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Improve handle_md_command argument handling: - Use parse_u32 and parse_uint for address and count, respectively.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2230
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-13  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Cleanup and improve handle_halt_command: - Make argument check use parse_uint to ensure value parses
	properly.  - Move variable declarations to location of first use.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2228
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-13  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Use parse_uint in handle_reg_command to ensure reg number parses
	properly.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2226
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-12  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Currently the "debug_level 3" command tracing ignores commands that
	could return values to TCL scripts (by plugging in to a slightly
	lower level of the interpreter stack).  Fix that by abstracting the tracing command and starting to make
	some of those previously-untraced commands use this new mechanism.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2224
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-12  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Partial fix to the "long IR length" problems.   - Current code could handle up to 32 bit IR lengths with    full functionality, if it didn't just reject may of them    out of hand.  So only reject clear errors, where the IR    mask (or capture instruction) needs more than IrLen bits.   - Longer IR lengths can only be handled in BYPASS mode    for now.  Example:  TI's DSPs use 38-bit IR lengths.     So we can't issue their IDCODE instructions...  A more complete fix would be able to issue longer instructions; or
	minimally, would fail cleanly for the non-BYPASS case.  Note that this *could* make some currently broken scripts fail,
	since the previous code accepted garbage values so long as they
	didn't use more than 16 bits.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2222
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-12  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Further cleanup to MIPS target read/write memory function: - Move the mips32_..._read_mem calls to top-level of read_mem
	function.  - Change: Only perform mips_m4k_read_mem conversion when retval ==
	   ERROR_OK.  - Prevents pointless conversions of bogus read values after
	failures.  - Eliminate retval variable from mips_m4k_write_mem; return
	directly.  - Move declaration of retval variable to point of first use.  - Remove the now redundant switch statements testing size:   - argument sanitizing already covers these cases.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2220
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-12  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix unitialized use of cur_speed in handle_jtag_khz_command: - Use the default KHz speed setting, in case interface is not
	initialized.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2218
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-12  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Improve handle_runtest_command: - Use parse_uint helper to ensure argument is parsed properly.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2216
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-12  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Improve handle_irscan_command: - Use parse_u32 helper to ensure scan values are parsed properly.  - Clear the fields buffer to ensure partial cleanup occur correctly.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2214
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-12  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Use parse_uint helper to replace strtoul call in
	jtag_tap_by_string.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2212
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-12  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Simplify and improve amt_jtagaccel_handle_parport_port_command: - Show the port number to the user when asking for it or setting it.  - Print an error if the amt_jtagaccel_port has already been set.  - Use parse_u16 helper to ensure amt_jtagaccel_port string parses
	correctly.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2210
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-12  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Simplify and improve handle_debug_level_comamnd: - Bug fix: Return a syntax error if more than one argument is given.  - Bug fix: Use new parse_uint helper ensure debug_level parses
	correctly.  - Change: Display the debug_level after it has been set.  - Simplify bounds checking of debug_level.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2208
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-12  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add new parse_uinttype wrappers for strtoul in
	src/helper/command.[ch].  - Used to improve command argument parsing of unsigned integers
	values.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2206
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Rework the "Simple Configuration Files" chapter so it's more of a
	quick-start "how to set up your project" tutorial:  - Say how to hook up the JTAG adapter.  This will help new    users, and in any case is worth spelling out somewhere.   - Streamline the previous rather haphazard presentation,    filling in some missing holes along the way:      * Suggest "project directory" structure      * Introduce new term, "user config" file (openocd.cfg)      * Talk about more options for openocd.cfg contents      * ... and about creating new config files      * Add new topic, project-specific utilities (+examples)  - Remove too-short, yet duplicative, chapter 19 Nudge packagers a bit more strongly to send patches (including
	config files) upstream.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2204
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-11  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix bug introduced during r1962 - Original patch submitted by David Claffey [dnclaffey@gmail.com].  git-svn-id: svn://svn.berlios.de/openocd/trunk@2202
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix ordering of arguments to fwrite() git-svn-id: svn://svn.berlios.de/openocd/trunk@2197
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Factor target_timer_callbacks_check_time into pieces: - Add target_timer_callback_periodic_restart and
	target_call_timer_callback.  - Clean up and simplify logic that determines whether to call each
	callback.  - Move variable declarations to location of first use.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2195
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Simplify and fix target handle_rwp_command routine: - Return syntax error unless exactly one argument is passed.  - Move variable declaration to point of first use.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2193
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Simplify handle_resume_command: - Eliminate redundant calls to target_resume with addr temp
	variable.  - Place variables at location of first use.  - Fix minor whitespace issues.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2191
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Move jtag_get_flush_queue_count near jtag_execute_queue (fix its
	docs).  git-svn-id: svn://svn.berlios.de/openocd/trunk@2189
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Group JTAG reset configuration and accessor APIs together in
	header file.  Remove unused reset_line_mode enumerated type.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2187
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Out-of-line jtag_tap_next_enabled and simplify its logic.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2185
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : disable polling continuous polling during reset git-svn-id: svn://svn.berlios.de/openocd/trunk@2183
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-10  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix texi/pdf issue created in svn r2039 git-svn-id: svn://svn.berlios.de/openocd/trunk@2181
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-10  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Tweak the csb337 code so that it doesn't enable alignment traps when
	it completes the "reset init" sequence.  It turns out that the
	current CFI code reliably triggers such traps.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2179
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Improve use of automake conditionals for FTDI-based JTAG
	drivers: - Remove once-used XXX_FTD2XX symbols; replace with XXX_DRIVER
	symbols.  - Enabled when either libftdi or FTD2xx driver should be built.  - Eliminates redundant DRIVERSFILE assignment in JTAG automake
	input.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2177
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Rename jtag_driver.c as driver.c to remove duplicate name
	component.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2175
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : reset to eol native for now. guess-rev.sh was broken by eol
	native, but it was a red herring that these two files were affected.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2173
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Encapsulate the core jtag interface pointer: - Add new jtag_config_khz to increase encapsulation of jtag->khz
	call.  - Add new jtag_get_speed_readable to encapsulate of jtag->speed_div
	call.  - Make definition of jtag static in core.c, remove extern from
	tcl.c.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2171
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Continue encapsulation of JTAG event callback sub-API: - Move jtag_event_callbacks struct to core.c; it's an implementation
	detail.  - Move jtag_*_event_callbacks next to the definition of the new
	function type.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2169
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Expose jtag_unregister_event_callback with related API
	declarations.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2167
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Properly encapsulate core hasKHZ variable.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2165
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add missing static keywords to a few variables in JTAG core
	module.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2163
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Encapsulate jtag_reset_config using accessors: - Update handle_reset_config_command in tcl.c to use new helpers.  - Replace direct accesses in JTAG interface and target drivers.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2161
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add get and set accessors for jtag_speed: - Setter calls the interface driver callback to improve core
	encapsulation.  - Use getter in standard JTAG interface drivers and ZY1000
	minidriver.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2159
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Encapsulate the jtag_trst and jtag_srst variables: - Add accessor functions to return their value.  - Use new SRST accessor in cortex_m3.c and mips_m4k.c git-svn-id: svn://svn.berlios.de/openocd/trunk@2157
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove superfluous extern of jtag_event_strings from jtag.h.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2155
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : removed native line end style - breaks cygwin git-svn-id: svn://svn.berlios.de/openocd/trunk@2153
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove accidental duplicate of hasKHz; fixes pre-init speed
	setup.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2151
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Split main jtag.c file into two layers: - src/jtag/core.c: contains the low-level JTAG TAP and scanning
	routines.  - src/jtag/tcl.c: contains high-level JTAG TCL commands that use the
	core.  - Remove static keywords from routines in core.c, extern from tcl.c:   - jtag, jtag_interface global variables   - jtag_{examine,validate}_chain and jtag_tap_{init,free} functions - Added myself to the copyright header in both of these files.  - Used 'svn cp' to add files, so versioning was preserved for both.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2149
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Move Doxygen documentation for IR/DR scan routines to header
	file.  - Move plain IR scan declaration closer to the other IR scan
	declarations.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2147
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove non-existant jtag_tap_by_position API declaration.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2145
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Cleanup jtag_tap_by_abs_position: - Remove unused orig_n local variable.  - Merge variable declaration with first use.  - Update code to use current style guidelines.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2143
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Simplify and fix bug in jtag_tap_by_string: - Bug fix: Use unsigned type and strtoul when parsing for position
	number.  - Simplify logic by returning directly when a tap is found by name.  - Reduce scope: declare temporary variables with first use.  - Bring code up to current style guidelines.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2141
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Cleanup jtag_tap_count_enabled.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2139
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Reduce scope or eliminate temporary variables in
	jtag_add_statemove: - Change types of tms_bits and tms_count to unsigned, eliminates a
	cast.  - Use moves[] only if needed; a single move can use goal_state
	directly.  - Declare loop induction variable inside its control statement.  - Remove retval in favor of direct returns.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2137
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-09  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Revert changes from r2134 that snuck into the commit.  Mea
	culpa.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2135
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-08  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix eol-style on guess-rev.sh git-svn-id: svn://svn.berlios.de/openocd/trunk@2133
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Zach Welch wrote a fix for configure problems under Cygwin.
	ltmain.sh is added to svn ignore git-svn-id: svn://svn.berlios.de/openocd/trunk@2131
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-08  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Factor interface list to its own command: - Add handle_interface_list_command, used by
	handle_interface_command.  - Display output of new list to command console.  - Change first index of displayed drivers to 1; it's only cosmetic.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2129
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-08  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Simplify jtag_add_sleep: - Add todo for removing keep_alive: is this a layering violation? - Use jtag_set_error instead of accessing jtag_error directly.  - Remove superfluous retval temporary variable and empty return.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2127
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-08  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Simplify jtag_add_clocks: - Use jtag_set_error instead of accessing jtag_error directly.  - Improve error language and whitespace.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2125
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-08  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Simplify jtag_add_pathmove: - Use jtag_set_error instead of accessing jtag_error directly.  - Eliminate superfluous retval temporary variable.  - Reduce scope of loop induction variable.  - Wrap to fit within 80 columns.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2123
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-08  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Simplify jtag_add_plain_dr_scan: - Use jtag_set_error instead of accessing jtag_error directly.  - Wrap function arguments to fit everything in 80 columns.  - Move retval variable to location of first use.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2121
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-08  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Simplify jtag_add_plain_ir_scan: - Use jtag_set_error instead of accessing jtag_error directly.  - Wrap function arguments to fit everything in 80 columns.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2119
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-08  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Simplify jtag_execute_queue: - Add static inline jtag_error_clear helper to return and clear
	jtag_error.  - Use new helper to shrink body of function to two lines.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2117
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-08  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Cleanup handle_runtest_command: - Make command argument require exactly one argument; do not allow
	extras.  - Remove superfluous whitespace at end of function.  - Wrap function arguments to fit in 80 columns.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2115
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-08  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Extend handle_jtag_n{s,t}rst_delay_command routines: - Add support to display the reset delays too, like the other
	commands.  - Always show the values, so users can see if they are being
	redundant.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2113
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-08  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Update JTAG reset delay command handlers: - Fixes for error handling:   - Return a syntax error instead of calling exit(-1).    - Return error when more than one argument is provided too.  - Remove useless braces and indent after the if/return statements.  - Wrap function arguments to fit in 80 columns.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2111
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-08  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Simplify logic in handle_jtag_speed_command.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2109
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> - Don't let disabled TAPs be set as the current target  - Improve "targets" output:     * Remove undesirable "chain position" number; we discourage
	    using them * TAP and Target column updates:        + make them long enough for current usage        + improve labels, removing guesswork        + "TapName" label patches scan_chain output     * Highlight the "current" target     * Display "tap disabled" as a new pseudo-state     * Update docs accordingly git-svn-id: svn://svn.berlios.de/openocd/trunk@2107
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-08  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Reorder configure script macros: - Check for a compiler before looking for libraries or header files.  - Initialize automake before calling other AM_ macros.  - Disable libtool shared libraries by default.  - Remove checks for unused C++, Fortran, and Java compilers.  - Remove redundant AC_CANONICAL_HOST; called by AC_PROG_LIBTOOL.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2105
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-08  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Move minidummy source file, as was supposed to happen in last
	commit.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2103
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-07  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix reference warning in JTAG primer, add another external
	reference.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2101
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-07  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Clarify docs for the evb_lm3s811 layout:  works in two modes, not
	just one.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2099
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-07  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Rework chapter 12 (CPU configuration) to use @deffn, match the code
	more closely, and present things more clearly.  Includes the *current* list of targets.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2097
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : retire endstate command git-svn-id: svn://svn.berlios.de/openocd/trunk@2095
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-07  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix regressions in previous series of cleanp, caused by r2092.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2093
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-07  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Factoring of jtag_examine_chain for maintainability: - Improve variable type: change device_count to unsigned.  - Improves jtag_tap_count_enabled() API too (now returns unsigned).  git-svn-id: svn://svn.berlios.de/openocd/trunk@2091
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-07  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Factoring of jtag_examine_chain for maintainability: - Factor TAP ID matching into new helper function.  - Simplifies the main jtag_examine_chain loop logic considerably.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2089
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-07  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Factoring of jtag_examine_chain for maintainability: - Add helper to check for the terminating ID during
	jtag_examine_chain.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2087
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-07  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Factoring of jtag_examine_chain for maintainability: - Factor output of accepted/incorrect/expected TAP IDs into static
	helper.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2085
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-07  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Factoring of jtag_examine_chain for maintainability: - Factor JTAG chain examination into static helper function.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2083
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-07  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Factoring of jtag_examine_chain for maintainability: - Reduce indent: invert logic test for unexpected TAP (no IDs).  git-svn-id: svn://svn.berlios.de/openocd/trunk@2081
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-07  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Factoring of jtag_examine_chain for maintainability: - Move definition of maximum JTAG chain size closer to its only
	uses.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2079
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-07  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Clean up handle_endstate_command(): - Merge declaration of state with first use.  - Unindent and remove unnecessary 'else' block.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2077
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-05  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : remove hacks no longer required to build OpenOCD w/eCos git-svn-id: svn://svn.berlios.de/openocd/trunk@2074
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-05  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : remove unused include file: inttypes.h git-svn-id: svn://svn.berlios.de/openocd/trunk@2072
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-05  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Eliminate MixedCaps symbol from public JTAG TAP API: - Purely mechanical transformations to the source files.  - Rename 'jtag_NextEnabledTap' as 'jtag_tap_next_enabled.' git-svn-id: svn://svn.berlios.de/openocd/trunk@2069
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-05  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Eliminate MixedCaps symbol from public JTAG TAP API: - Purely mechanical transformations to the source files.  - Rename 'jtag_NumTotalTaps' as 'jtag_tap_count.' git-svn-id: svn://svn.berlios.de/openocd/trunk@2067
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-05  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Eliminate MixedCaps symbol from public JTAG TAP API: - Purely mechanical transformations to the source files.  - Rename 'jtag_TapByString' as 'jtag_tap_by_string.' git-svn-id: svn://svn.berlios.de/openocd/trunk@2065
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-05  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Eliminate MixedCaps symbol from public JTAG TAP API: - Purely mechanical transformations to the source files.  - Rename 'jtag_TapByPosition' as 'jtag_tap_by_position.' git-svn-id: svn://svn.berlios.de/openocd/trunk@2063
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-05  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Eliminate MixedCaps symbol from public JTAG TAP API: - Purely mechanical transformations to the source files.  - Rename 'jtag_all_taps' as '__jtag_all_taps.' - Frees original symbol name to rename the accessor function.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2061
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-05  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add accessors for reset delays; use them in jim command
	handlers.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2059
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-04  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add jtag_get_flush_queue_count accessor to help future
	factoring.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2057
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-04  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Clean up the core JTAG TAP APIs: - Move jtag_tap_name to same location as other TAP functions; export
	it.  - Factor new jtag_tap_add() from jim_newtap_cmd(); appends TAP to
	global list.  - Move static chain position counter to global; use in
	jtag_NumTotalTaps().  - Use jtag_AllTaps for reading tap list, instead of accessing global
	directly.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2055
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-04  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add missing static keywords in JTAG source file.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2053
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-04  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add support for different TAR autotincrement sizes as per ARM ADI
	spec.  - set TAR size to 12 bits for Cortex-M3.  - Original patch submitted by Magnus Lundin [lundin@mlu.mine.nu].  git-svn-id: svn://svn.berlios.de/openocd/trunk@2051
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Introduce jtag_get_end_state() fn to clarify code a bit.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2049
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : do not modify global end state from jtag_add_xxx() git-svn-id: svn://svn.berlios.de/openocd/trunk@2047
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : no longer use jtag_add_xxx() to set end state to TAP_DRPAUSE git-svn-id: svn://svn.berlios.de/openocd/trunk@2045
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : use assert() to catch TAP_INVALID passed to jtag_add_xxx() fn's.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2043
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : jtag_add_end_state() now returns the value of the global
	variable and does not modify the global variable if passed
	TAP_INVALID. This patch has no effect on the current code and is
	just to prepare upcoming patches.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2041
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-04  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Update the "General Commands" (a.k.a. "random stuff") chapter, and
	associated chunks of other text:  - Switch to @deffn and review everything that's documented  - Improve descriptions of reset events, with reference to    the setup.tcl code which issues them.   - Move one zy1000-specific command to that driver's doc.   - There is no "script" command; remove its doc.  NOTE:  Some things missing from this bit of work are:  1- Reviewing the code to catch various *missing* functions,     mostly from "target.c"  2- Alphabetizing and organizing.  This chapter is a real     grab-bag with no evident focus or structural principle.   3- Hole-filling and bugfixing with respect to messaging/logging.      Example, what principle could possibly justify the tcl command     output going into the server output/log instead of just the     telnet session?  4- Not just for this chapter ... but there should be a section     with descriptions of all the supported image file formats,     so every image command can just reference that section.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2039
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-04  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Minor cleanup of FT2232:   - make Olimex glue warn about Olimex issues instead of JTAGkey
	  issues; - make some data static+const;   - don't export some internal symbols.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2037
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-04  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Convert the Interface/Dongle Config chapter's section on drivers to
	use the @deffn syntax, and integrate the presentation of the
	driver-specific commands with the relevant driver.  Alphabetize.  Cross-checked against the code ... several adapters were not listed,
	and a few commands weren't.  (Maintainers for the versaloon and zy1000 drivers would be good
	candidates to add the commands missing from those sections...) git-svn-id: svn://svn.berlios.de/openocd/trunk@2035
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-03  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : use assert() for obscure check on illegal arguments upon trst
	being asserted while commands are queued git-svn-id: svn://svn.berlios.de/openocd/trunk@2033
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-03  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : catchup with jtag refactoring.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2031
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-03  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Finish JTAG header file modularization; command factoring
	follows.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2029
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-03  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Move JTAG command APIs into new jtag/commands.h header file.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2027
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-03  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Improve in-source documentation that was causing Doxygen
	warnings.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2025
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-03  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Improve logger script to expose warnings and errors in the
	output.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2023
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-03  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add draft of Patching Primer in The Manual; update primer page.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2021
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-03  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Enable or add doxygen comments to the public JTAG API.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2019
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-03  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove vestigal tap_transition type from public jtag API.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2017
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-03  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Expose tap_state_by_name TAP helper available in public API.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2015
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-03  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Rework the TAP creation documentation.   - Try to use "TAP" not "tap" everywhere; it's an acronym.   - Update the associated "target config files" section:      * reference the "TAP Creation" chapter for details      * simplify:  reference interesting multi-tap config files      * let's not forget CPU configuration (*before* workspace setup)      * streamline it a bit      * move that workspace-vs-mmu issue to a better location  - Clean up TAP creation doc mess      * switch to @deffn      * (re)organize the remaining stuff      * reference the "Config File Guidelines" chapter  - Tweak the "Target Configuration" chapter      * rename as "CPU configuration"; unconfuse vs. target/*.cfg      * bring out that it's not just there for GDB      * move TAP events to the TAP chapter, where they belong
	     (bugfix) git-svn-id: svn://svn.berlios.de/openocd/trunk@2013
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-03  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add missed accessor for checking the current TMS table.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2011
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-03  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Make tap_state_by_name available in new JTAG interface API
	header.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2009
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-02  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Finish removing '#ifdef HAVE_JTAG_MINIDRIVER_H' from jtag.h: - Wraps JTAG callback API functions:   - Outlines jtag_add_callback() and jtag_add_callback4().    - Adds interface_ prefix to existing in-tree driver
	  implementation.  - Declare the driver interfaces routines in miniheader.h file.  This patch requires renaming the equivalent macros in out-of-tree
	jtag_minidriver.h implementations.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2007
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-02  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - change signature for adi_jtag_dp_scan and adi_jtag_dp_scan_u32 to
	use swjdp_common_t *swjdp instead of arm_jtag_t *jtag_info - change SWJDP_IR/DR_APACC to DAP_IR/DR_APACC to conform with
	ARM_ADI docs.  - add swjdp->memaccess_tck field and code for extra tck clocks
	before accessing memory bus - Set default memaccess value to 8 for Cortex-M3.  - Add dap memaccess command.  - document all armv7 dap cmds.  - Original patch submitted by Magnus Lundin [lundin@mlu.mine.nu].  git-svn-id: svn://svn.berlios.de/openocd/trunk@2005
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : remove unecessary #ifdef as file is only built when minidriver
	is enabled.  git-svn-id: svn://svn.berlios.de/openocd/trunk@2003
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : more missing eCos types git-svn-id: svn://svn.berlios.de/openocd/trunk@2001
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-02  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Move interface_jtag_add_scan_check_alloc implementations to
	their respective implementation files.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1999
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove unused code, TAP_INVALID is never passed to drivers.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1997
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-02  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : More JTAG interface driver cleanup: - Moves references to global jtag interface to default core
	implementation.  - Missed this reference in the earlier "pointless" patch.  Mea
	culpa.  Important: this has a side-effect.  Previously, the error return
	inside the interface routine short-circuited the remainder of that
	function when 'init' has not been called.  With this patch, the
	command queue will be cleared in the case that 'init' has been
	called.  Since that case indicates a buggy script, this does not
	seem to be a problem.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1995
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-02  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : More JTAG interface driver cleanup: - Make interface_jtag_execute_queue call new helper function.  - Add default_interface_jtag_execute_queue to wrap jtag interface
	access.  This patch may look useless on its own, but it helps to isolate the
	core JTAG variables from the interface_jtag_* routines, so the later
	can be moved into jtag_driver.c in a pending patch.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1993
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-02  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Encapsulate JTAG command interfaces for moving to
	jtag_interface.h.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1991
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-02  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Start clean-up of JTAG driver interface: - Factor jtag_add_scan_check to call new jtag_add_scan_check_alloc
	helper.  - Use conditional logic to define two versions of the helper.  - These helpers will be moved to other files in future patches.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1989
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-01  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Whitespace fixes in jtag.c ... mostly end-of-line crap.  Flag
	"jtag_device" command as obsolete in its helptext.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1987
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-01  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: This is the missing half of the r1974 patch: OSK5912 board support,
	which was split out from the omap5912 target config.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1985
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-01  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Encapsulate JTAG minidriver functions, plan for new header file.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1983
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-01  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Scrub final vestiges of in_handler from mips target APIs.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1981
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-01  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix warning for a variable that GCC thought might be
	uninitialized(which it can't be).  git-svn-id: svn://svn.berlios.de/openocd/trunk@1979
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-01  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Uplevel the arch commands to be a chapter; they really don't fit in
	the "general commands" category.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1977
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-01  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Various updates, mostly small/formatting changes:  * Small content tweaks:     - Re-title:  "OpenOCD User's Guide".      - For users, URLS for latest doc and SparkFun forum     - Mention GIT-SVN  * Fix some front-matter goofage, matching texinfo docs:     - "paragraphintent" location matters     - put release version/date description with the copyright  * Fix some other stuff matching texinfo docs:     - no tabs     - tweak some refs and anchors  * whitespace-at-end-o-line fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@1975
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-06-01  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Whitespace fixes.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1973
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-31  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Final step in isolating target_type_s structure: - Move definition of 'struct target_type_s' into new 'target_type.h'
	file.  - Forward delclaration remains in target.h, with comment pointing to
	new file.  - Replaces #define with #include in source files.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1971
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-31  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : First step in hiding target_type_s from public interface: - Add DEFINE_TARGET_TYPE_S symbol in files that need it defined.  - Forward declare 'struct target_type_s' only, unless that symbol is
	defined.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1969
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-31  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add target breakpoint and watchpoint wrapper: - replaces all calls to
	target->type->{add,remove}_{break,watch}point.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1967
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-31  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add target_step wrapper: - replaces all calls to target->type->step.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1965
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-31  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add target_bulk_write_memory wrapper: - replaces all calls to target->type->bulk_write_memory.  - add documentation in target_s to warn not to invoke callback
	directly.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1963
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-31  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add target_run_algorithm wrapper: - replaces all calls to target->type->run_algorithm.  - add documentation in target_s to warn not to invoke callback
	directly.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1961
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-31  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add target_read_memory wrapper: - replaces all calls to target->type->read_memory.  - add documentation in target_s to warn not to invoke callback
	directly.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1959
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-31  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Make nvp_target_event static; remove its external declaration.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1957
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-31  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Peter Denison <openwrt@marshadder.org>: The debugging code in jlink_tap_execute() called when
	_DEBUG_USB_COMMS_ is defined was using the entire cached scan length
	to print the results buffers, and not the correct length of each
	individual buffer.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1955
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Eliminate duplicated code in the handle_mw_command memory write
	loop.  - wordsize will always be 1, 2, or 4 due to preceeding switch
	statement.  - move call to keep_alive after successful writes, not upon failures git-svn-id: svn://svn.berlios.de/openocd/trunk@1953
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove unused jlink_execute_end_state (unreferenced after
	r1949).  git-svn-id: svn://svn.berlios.de/openocd/trunk@1951
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-30  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : remove unused JTAG_END_STATE git-svn-id: svn://svn.berlios.de/openocd/trunk@1949
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-30  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : more reset_config texts git-svn-id: svn://svn.berlios.de/openocd/trunk@1947
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Provide basic documentation on the ARM ETM and ETB trace commands.  Fix minor goofs in registration of the ETM commands; and whitespace
	issues in the proof-of-concept oocd_trace code.  (Plus include a ref
	to Dominic's email saying that it's just proof-of-concept code.) Note that I'm still not sure whether the ETM support works.  But
	documenting how it's expected to work should help sort out which
	behaviors are bugs, which will help get bugs patched.  ZW: whitespace changes were split out of this patch but will follow.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1945
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-29  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove error_handler_t type definition; it was unused in the
	tree.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1943
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-29  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Provide basic documentation for some of the other flash drivers.   avr ... looks incomplete, may work with one AVR8 microcontroller  ecosflash ... can't find docs  lpc288x ... an NXP part, driver seems lpc2888-specific  ocl ... some arm7/arm9 thing, can't find docs  pic32mx ... looks incomplete, for PIC32MX (MIPS 4K) devices  tms470 ... for TI TMS470 parts Still seems to be mostly arm7tdmi... several of these have no users
	in the current tree.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1941
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-28  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Start converting the architecture-specific commands to @deffn
	format, reviewing against the code.    * armv4_5 disassemble ... now documented; although Jazelle code     is not handled   * It's "armv4_5 core_state" not "core_mode"; although Jazelle
	    state is not handled   * arm7/9 "debug" commands ... now with other arm7_9 commands, no     longer in a separate section   * arm926ejs cp15 ... previous description was broken, it matched     the code for arm920t instead   * Have separate subsections for ARMv4/ARMv5, ARMv6, and ARMv7; the     latter are new   * Move core-specific descriptions into sub-subsections under those     architectures; XScale and ARM11 descriptions are new The new XScale and ARM11 command descriptions surely need
	elaboration and review.  ARM CP15 operation descriptions in general
	seem to be confused and incomplete.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1939
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-28  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Start updating the NOR flash coverage to use @deffn syntax, so the
	commands have more consistent presentation and formatting.  This
	reorganizes information and updates its presentation, except where
	the information didn't really match the code.  This patch updates most of the driver specific support, creating one
	new (and alphabetized!) section just for driver-specific data, where
	previously that data was split over up to three sections.  Of note:  - The at91sam7 docs were a bit out of date with respect to the
	 code.   - The "str9xpec" stuff still deserves some work.  For now, it sits    in its own subsection; pretty messy.   - Likewise the "mflash" stuff.  That's a parallel infrastructure,    and is now in a section of its own.   - The "mass_erase" commands for the Cortex M3 chips got turned into    footnotes.  IMO, they should vanish sometime; they're
	   superfluous.   - There are still a bunch of undocumented NOR drivers.  Examples:    avr(8), tms470, pic32mx, more.  Plus there are a handful of minor tweaks to the NAND docs (to help
	make the NOR and NAND presentations be parallel); the "Command
	Index" has been renamed as the "Command and Driver Index"; reference
	TI instead of Luminary Micro in several places.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1937
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-27  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix potentialyl unaligned memory accesses in mflash driver.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1935
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-27  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Author: Nicolas Pitre <nico@cam.org> 	- Silence errors about keep_alive() not being called frequently
		enough unless a gdb session is active or debugging is enabled git-svn-id: svn://svn.berlios.de/openocd/trunk@1933
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-27  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : unsik Kim <donari75@gmail.com>: Add large bank write/dump
	support in mflash driver.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1931
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-27  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : unsik Kim <donari75@gmail.com>: Remove unused mflash driver
	'prove' field.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1929
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-27  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : unsik Kim <donari75@gmail.com>: Change prefix of mflash driver
	routines to mg_.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1927
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-27  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add support for cortino jtag interface git-svn-id: svn://svn.berlios.de/openocd/trunk@1925
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-27  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Link new Primer pages into the main list of Primers.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1923
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-27  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add draft of Autotools Primer to The Manual.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1921
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-27  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Move TCL script files -- Step 2 of 2: - Move src/tcl to tcl/.  - Update top Makefile.am to use new path name.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1919
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-27  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add warning to generated Doxyfile to edit Doxyfile.in.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1917
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-26  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : SimonQian <simonqian@SimonQian.com>, reported by R.Doss: This patch fixes a segfault when TDO was not received in XXR
	command: - allocate space for the value and mask anyway - clear the mask to zero to effectively skip the output comparison
	step git-svn-id: svn://svn.berlios.de/openocd/trunk@1915
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-26  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Update the "Reset Configuration" information in the User's guide:  - Convert to @deffn syntax  - Move tutorial text from command descriptions into new sections  - Describe several different types of JTAG-visible reset  - Expand descriptions of configuration tweaks for SRST and TRST  - Link to the "reset" command, and vice versa  - Bugfix the "reset_config" description (it didn't match the code) Plus, be more proscriptive:  do it in board config files, except for
	the oddball cases where that won't work. (Current target.cfg files
	seem to have much goofage there; several seem board-specific.) git-svn-id: svn://svn.berlios.de/openocd/trunk@1913
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-25  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Author: Raúl Sánchez Siles <rsanchezs@infoglobal.es> - cfi flash_address coding style fix git-svn-id: svn://svn.berlios.de/openocd/trunk@1911
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-24  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: Make startup for the various server ports be quiet, unless debugging
	is active:  don't emit needless scarey messages.  Update the
	relevant documentation and its references:  - For these port commands ... cover the default values;    convert to @deffn syntax; include their use outside of    the configuration stage; and alphabetize.  Similar updates to the rest of that small chapter:  - Highlight that there even *IS* a configuration stage, after    which some command functionality is no longer available.   - For GDB commands ... convert to @deffn syntax; alphabetize;    include a missing command (!); add missing helptext (!) for    one non-missing command; update relevant cross-references    and index entries.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1909
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-24  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: minor davinci_nand bugfix Fix a bug that joined us at the last minute, when an efficient
	alloca() call got swapped out for a more portable malloc().  Also log one error, to give a clue in case it appears "in the wild".  git-svn-id: svn://svn.berlios.de/openocd/trunk@1907
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-24  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Nicolas Pitre <nico@cam.org>: Update sheevaplug interface
	script: When the CPU is in the WFI state, the JTAG interface simply doesn't
	respond at all and initial tap examination simply fails.  Let's
	simply do it again when we come around to assert nSRST.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1905
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-24  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>: NAND support for DaVinci-family drivers, with HW ECC support.
	Declare the NAND chip on the DM355 EVM board.  Currently tested on DM355 for Linux interop using the standard large
	page (2KB) chip in the EVM socket; "hwecc1" and "hwecc4" work fine.
	(Using hwecc4 relies on patches that haven't quite made it through
	the Linux-MTD bottlenecks yet.) Not yet tested:  1-bit on small-page (although it's hard to see how
	that could fail); 4-bit on small page (picky layout issues); the
	"hwecc_infix" mode (primarily for older boot ROMs; testing there is
	blocked on having new bootloader code).  git-svn-id: svn://svn.berlios.de/openocd/trunk@1903
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-24  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Properly fix doxygen out-of-tree build process: - move Doxyfile to Doxyfile.in: type 'make Doxyfile' to recreate it - create Doxyfile from Doxyfile.in with make rule:   - use sed substitution of $(srcdir) to location directories - delete all doxygen created files with 'make distclean' - include all required files (including logger.pl) in distribution git-svn-id: svn://svn.berlios.de/openocd/trunk@1901
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-24  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Freddie Chopin <freddie_chopin@op.pl>: - add reset delay settings for LPC2103, LPC2124, and LPC2129.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1899
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-23  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Update main page of doxygen developer documentation: - Rewrite copy to give a better introduction and overview.  - Add subpages: The List, Style Guide, Patch Policies, and Bug
	Reporting.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1897
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-23  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Update user guide documentation: - Remove style guide from user guide; moved to doxygen manual.  - Replace with improved introduction for developers and packagers.  - Move introductory paragraph about the project under the About
	page.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1895
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-23  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Submitted by Magnus Lundin <lundin@mlu.mine.nu>: - Remove FTDI driver tap_set_state call; performed by
	jtag_add_reset.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1893
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-23  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix make docs rule to work with out-of-tree builds.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1891
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-23  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Submitted by Magnus Lundin <lundin@mlu.mine.nu>: Updates to the J-Link interface driver to support more device
	versions: - Add capability detection:   - if capable, detect protocol version; otherwise, assume v2
	  protocol.  - if capable, detect buffer size; otherwise, assume minimal.  - Disable command result queries for devices using v2 protocol.  - Defined and use JTAG2 command with v2 protocol; JTAG3 is v3
	protocol.  - Add TCL command to allow explicit setting of J-Link protocol
	version.  With approval, I revised the patch to make the following changes: - add static keywords to new jlink-specific variables - factor calculation of major_version to be more readable - remove braces around simple one-line statements in if/else clauses - remove (rather than #if 0) duplicate reset code; it is in SVN - use &function to be clearer when passing function pointers - add symbols for EMU_CMD_GET_CAPS bits; do not hard-code constants! - almost renamed jlink_handle_jlink_hw_jtag_command  (seriously?!?!)   - rewrote that function using a switch statement.    - made version request processing easier to understand and modify - improve alternate endpoint detection:   - make code easier to read by using temporary variables   - eliminate extra level of indentation and redundant logging - use ternary conditional to select JTAG2 or JTAG3 command - reverse version test in jlink_usb_message to reduce indentation   - this had the biggest effect in cleaning up this patch - use C99's ability to declare new/changed variables with less scope - add spaces around binary operators in new/changed code - revert other superfluous whitespace/comment style changes git-svn-id: svn://svn.berlios.de/openocd/trunk@1889
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-23  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Change doxygen configuration to show code comments in
	documentation.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1887
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-22  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Author: Raúl Sánchez Siles <rsanchezs@infoglobal.es> 	- Fix calculation of flash_address for x16 devices used as x8 git-svn-id: svn://svn.berlios.de/openocd/trunk@1885
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-22  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Author: David Brownell <david-b@pacbell.net> Remove un-implemented and dubious "nand copy" command.  Doing this efficiently would mean doing the copying on the target
	CPU, instead of back and forth through JTAG.  If anyone ever needs
	this functionality, that's what they should implement.  Also, update on-line "help" for "nand dump" to display its two
	optional flags; and for "nand write" to display a recently added
	flag.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1883
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-22  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Submitted by David Brownell <david-b@pacbell.net>: Improve support for the DM355 EVM board, and eventually other boards
	based on DaVinci chips:  - Provide generic "davinci.cfg" to hold utilities that can be
	   reused by different chips in this family.  Start with PINMUX, PSC,
	and PLL setup.   - DM355 chip support updates:  provide a dictionary with
	   chip-specific symbols, load those utilities.   - Create a new dm355evm board file, with a reset-init event handler    which uses those utilities to set up PLLs and clocks, configure
	   the pins, and improve the JTAG speed limit.  Also a minor tweak:  provide a virtual address for the work area,
	matching what the very latest kernels do.  It's probably unwise to
	use OpenOCD while the MMU is active though.  The DRAM isn't yet accessible, but NAND access is mostly ready.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1881
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-22  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Submitted by David Brownell <david-b@pacbell.net>: Add a "NAND Commands" section to to the TEXI docs, covering the
	basic commands except for those previously discussed as being due
	for removal ("nand copy") or switching to use byte offsets not block
	numbers.  This uses the "@deffn..." syntax for defining commands, as somewhat
	suggested by the TEXI documentation, and adds a new "Command Index".
	We might prefer to merge those indexes for the near term, but I
	think the "@deffn" approch is probably worth switching to.  Updates a few other bits to clarify that "flash" doesn't just mean
	NOR.  And to fix one niggling falsity:  the "reset-init" event *is*
	used, and in fact it's quite important.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1879
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix warning. Use %p for pointers git-svn-id: svn://svn.berlios.de/openocd/trunk@1877
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Dirk Behme <dirk.behme@googlemail.com> Minor updates for OMAP3
	scripts git-svn-id: svn://svn.berlios.de/openocd/trunk@1875
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-21  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>:  This patch adds
	annotations to the key command_*() helper functions, fixng the bugs
	that turned up.  Several of these bugs were from misuse of PRIi64; that's for 64-bit
	integers, NOT for "long long" or "u64" (which work best with %lld).  git-svn-id: svn://svn.berlios.de/openocd/trunk@1873
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-21  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Author: Thomas Kindler <mail@t-kindler.de> 	- Increase DTC status retry count to avoid problems with STM Primer git-svn-id: svn://svn.berlios.de/openocd/trunk@1871
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-21  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Author: Holger Schurig <hs4233@mail.mn-solutions.de> 	-Prevent freezing of target when doing a 'shutdown'.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1869
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-21  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Author: Michael Bruck <mbruck@digenius.de>    -jtag.c, interface_jtag_add_dr_out():         - use pointer 'field' instead of scan->fields[field_count]         - restructure the main loop to clearly separate the two
	          cases: TAP is not bypassed / TAP is bypassed (this is to
	        keep the function similar to interface_jtag_add_dr_scan()) - fix bug where only the first output field has its tap field set         - add asserts to verify that target_tap points to the one
	        not bypassed TAP git-svn-id: svn://svn.berlios.de/openocd/trunk@1867
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-21  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Author: Michael Bruck <mbruck@digenius.de>     -jtag.c, interface_jtag_add_ir_scan():         - use pointer 'field' instead of scan->fields[nth_tap]         - add assertion to ensure that input data has correct size
	        for TAP's IR git-svn-id: svn://svn.berlios.de/openocd/trunk@1865
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-21  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Author: Michael Bruck <mbruck@digenius.de>     - jtag.c: remove unused variable 'nth_tap' from DR scan
	    functions git-svn-id: svn://svn.berlios.de/openocd/trunk@1863
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-21  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Author: Michael Bruck <mbruck@digenius.de>     - jtag.c: consolidate all memory allocations in scan functions
	    in one block, add out_fields pointer to set stage for further
	    changes git-svn-id: svn://svn.berlios.de/openocd/trunk@1861
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-21  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Author: Michael Bruck <mbruck@digenius.de>     - add doxygen comments to scan commands in jtag.c     - move jtag_add_dr_scan next to interface_jtag_add_dr_scan to
	    keep these function pairs together git-svn-id: svn://svn.berlios.de/openocd/trunk@1859
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-20  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add initial OpenOCD server documentation (Duane Ellis and
	myself).  git-svn-id: svn://svn.berlios.de/openocd/trunk@1857
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-20  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Move TCL overview from source tree to doxygen manual.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1855
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-20  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Move non-arm target overview from source tree to doxygen manual.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1853
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-20  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Spencer Oliver <spen@spen-soft.co.uk> use 7 tms out of reset git-svn-id: svn://svn.berlios.de/openocd/trunk@1851
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-20  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Author: Michael Bruck <mbruck@digenius.de>     - simplify code in interface_jtag_add_plain_dr_scan() by adding
	    a local variable 'scan' to hold the scan_command_t git-svn-id: svn://svn.berlios.de/openocd/trunk@1849
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-20  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Author: Michael Bruck <mbruck@digenius.de>     - simplify code in interface_jtag_add_dr_out() by adding a local
	    variable 'scan' to hold the scan_command_t git-svn-id: svn://svn.berlios.de/openocd/trunk@1847
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-20  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Author: Michael Bruck <mbruck@digenius.de>     - simplify code in interface_jtag_add_dr_scan() by adding a
	    local variable 'scan' to hold the scan_command_t git-svn-id: svn://svn.berlios.de/openocd/trunk@1845
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-20  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Author: Michael Bruck <mbruck@digenius.de>     - move scan_size in interface_jtag_add_ir_scan() into the scope
	    of the inner loop and change it to unsigned git-svn-id: svn://svn.berlios.de/openocd/trunk@1843
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-20  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Author: Michael Bruck <mbruck@digenius.de>     - rename local variable x to num_taps in
	    interface_jtag_add_ir_scan git-svn-id: svn://svn.berlios.de/openocd/trunk@1841
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-19  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Wookey <wookey@wookware.org>: add user documentation for echo
	command.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1839
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix warnings git-svn-id: svn://svn.berlios.de/openocd/trunk@1837
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net>  NAND: update ids, "nand
	list" bugfix git-svn-id: svn://svn.berlios.de/openocd/trunk@1835
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : use tap_get_tms_path_len() instead of fix # of 7. Not tested if
	this builds, but at least we're looking at a build error instead of
	a runtime error.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1833
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : use tap_get_tms_path_len() instead of fix # of 7.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1831
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : updated w/jtag_add_end_state() note.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1829
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-18  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Enable non-7-cycle state table for FT2232 and JLink git-svn-id: svn://svn.berlios.de/openocd/trunk@1827
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-18  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : FT2232 support for non-7-cycle state moves by Dick Hollenbeck
	<dick@softplc.com> git-svn-id: svn://svn.berlios.de/openocd/trunk@1825
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-18  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Change last_comand_pointer to last_command_pointer by Michael
	Bruck <mbruck@digenius.de> git-svn-id: svn://svn.berlios.de/openocd/trunk@1823
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-18  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add jtag_queue_command() by Michael Bruck <mbruck@digenius.de>
	[7/8] git-svn-id: svn://svn.berlios.de/openocd/trunk@1821
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-18  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add jtag_queue_command() by Michael Bruck <mbruck@digenius.de>
	[5/8] git-svn-id: svn://svn.berlios.de/openocd/trunk@1819
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-18  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add jtag_queue_command() by Michael Bruck <mbruck@digenius.de>
	[3/8] git-svn-id: svn://svn.berlios.de/openocd/trunk@1817
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-18  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add jtag_queue_command() by Michael Bruck <mbruck@digenius.de> git-svn-id: svn://svn.berlios.de/openocd/trunk@1815
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-18  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : PATCHES updates from David Brownell <david-b@pacbell.net> git-svn-id: svn://svn.berlios.de/openocd/trunk@1813
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove unecessary(and poptentially harmful?) "" around arguments
	passed in to "eval" in command.c git-svn-id: svn://svn.berlios.de/openocd/trunk@1811
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Dean Glazeski <dnglaze@gmail.com> fixed bug in checking of
	clocked back data in arm7_9_execute_fast_sys_speed. Not reported.
	There is a chance that this bug hid a deeper problem since it only
	partially disabled the check(mask & value were equal).  git-svn-id: svn://svn.berlios.de/openocd/trunk@1809
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Michael Bruck <mbruck@digenius.de> ARM11 cleanup stale
	dependencies with generic arm code; added comments and whitespace
	fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@1807
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-18  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix logically inverted comment git-svn-id: svn://svn.berlios.de/openocd/trunk@1805
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-18  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : ETM/ETB documentation from David Brownell <david-b@pacbell.net> git-svn-id: svn://svn.berlios.de/openocd/trunk@1803
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-17  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix array2mem/mem2array when used as a "method" on a target.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1801
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix naming of at91sam7 driver git-svn-id: svn://svn.berlios.de/openocd/trunk@1799
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-15  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Initialize a more variables in jim.c to allow gcc-4.4 to build.
	Fix provided by Benjamin Schmidt <DeMonk@gmx.net>.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1797
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-15  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix -fno-common/Mac build problems.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1795
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-15  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : revert to 1775. 1790 causes SEGFAULT w/Cygwin.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1793
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-15  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add current draft of The List of Pending and Open Tasks.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1791
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-14  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Several minor fixes for the new doxygen manual.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1789
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : use TAP_INVALID enum instead of -1 git-svn-id: svn://svn.berlios.de/openocd/trunk@1787
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : dump_image now works for addresses not divisible by 4 git-svn-id: svn://svn.berlios.de/openocd/trunk@1785
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : selftest wip git-svn-id: svn://svn.berlios.de/openocd/trunk@1783
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-13  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Update configure script test for net/if.h to work on MacOS.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1781
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-13  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix bootstrap script to support MacOS glibtoolize oddity.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1779
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-13  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add JTAG Primer to doxygen manual, contributed by Strontium.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1776
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-13  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added verify_jtag command git-svn-id: svn://svn.berlios.de/openocd/trunk@1774
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-13  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : shuffled comments about for jtag_add_dr_out() fn.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1772
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-12  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : irscan now also works correctly in addition to not crashing :-) git-svn-id: svn://svn.berlios.de/openocd/trunk@1770
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-12  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : 4-bit ECC support for Marvell Kirkwood SOC git-svn-id: svn://svn.berlios.de/openocd/trunk@1768
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-12  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : move eCos type definition to types.h where it belongs.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1766
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-12  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix build issue when HAVE_ELF_H is not defined git-svn-id: svn://svn.berlios.de/openocd/trunk@1764
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-12  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Include project doxygen configuration with distribution
	tarballs.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1762
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-12  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Make replacements.h private by including it from config.h
	autoheader.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1760
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-12  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Audit and reduce #include directives in jim source files.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1758
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-12  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove config.h from types.h; all .c files are required to
	include it.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1756
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-12  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Update rlink_make_speed_table.pl script to add config.h to its
	output.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1754
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-12  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added jtag_alloc_in_value32 - not used in this commit.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1752
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-12  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Include assert.h in system.h to promote tree-wide use of
	assertions.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1750
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : now builds on 64 and 32 bit systems git-svn-id: svn://svn.berlios.de/openocd/trunk@1748
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Update jim helper files to use proper configure script support: - configure.in: Add AC_TYPE_LONG_LONG_INT to detect 'long long int'
	support.  - configure.in: Add AC_C_CONST to provide equivalent support as
	jim.h.  - jim*.c: include config.h when HAVE_CONFIG_H is defined.  - jim*.{h,c}: use HAVE_LONG_LONG_INT definition from config.h.  - jim.h: Remove hard-coded const and HAVE_LONG_LONG definitions.  - jim.h: -DJIM_NO_CONST has been obsoleted; -Dconst is equivalent.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1744
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : USB performance regression fix git-svn-id: svn://svn.berlios.de/openocd/trunk@1742
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : switch to jtag_add_dr_scan() from the synchronous version - USB
	performance fix git-svn-id: svn://svn.berlios.de/openocd/trunk@1740
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : switch to jtag_add_dr_scan_check() - USB performance fix git-svn-id: svn://svn.berlios.de/openocd/trunk@1738
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : change jtag_add_callback API to be able to support
	check_value/mask git-svn-id: svn://svn.berlios.de/openocd/trunk@1735
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : switch to jtag_add_callback() - USB performance fix git-svn-id: svn://svn.berlios.de/openocd/trunk@1733
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : switch to jtag_add_callback() - USB performance fix git-svn-id: svn://svn.berlios.de/openocd/trunk@1731
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : switch to jtag_add_callback() - USB performance fix git-svn-id: svn://svn.berlios.de/openocd/trunk@1729
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : switch to jtag_add_callback() - USB performance fix git-svn-id: svn://svn.berlios.de/openocd/trunk@1727
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : switch to jtag_add_callback() - USB performance fix git-svn-id: svn://svn.berlios.de/openocd/trunk@1725
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : leave eCos include file issues alone for now.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1723
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : used by upcoming commits git-svn-id: svn://svn.berlios.de/openocd/trunk@1721
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Update Doxyfile configuration for doxygen 1.5.8: - Enable doxygen's C language optimizations.  - Use dot command (from graphviz package) to generate visual graphs.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1719
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove redundant config.h from replacements.h, obtained from
	types.h.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1717
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Audit and eliminate redundant #include directives in other
	target files.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1715
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Audit and eliminate redundant #include directives in core target
	files.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1713
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Audit and eliminate redundant #include directives in src/flash
	headers.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1711
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Audit and eliminate redundant #include directives from
	src/server.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1709
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Audit and eliminate redundant #include directives from src/jtag.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1707
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Simplify #include directives in ioutil.c, use new header checks.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1705
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add --enable-malloc-logging configure option and update log.c to
	match.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1703
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Finish portability support for AC_HEADER_STDBOOL configure
	macro.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1701
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add configure check for sys/types.h; include in our types.h.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1699
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-11  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Use AC_HEADER_STDBOOL macro instead of
	AC_CHEACK_HEADERS(stdbool.h).  git-svn-id: svn://svn.berlios.de/openocd/trunk@1697
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-10  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Extend autotools build to create shared library libopenocd with
	libtool: - Add libtoolize step too bootstrap script; creates ltmain.sh
	script.  - Add AC_PROG_LIBTOOL to configure.in to add libtool support to
	build.  - Change Makefile.am library rules from static (_a) to libtool
	(_la).  - Install libopenocd.{la,so,a} in $(libdir); update openocd link
	rules.  - Extend MAINTAINERCLEANFILES in top-level Makefile.am to remove
	ltmain.sh.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1695
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-10  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Extend configure script to check for environ declaration in
	stdlib.h.  Patch contributed by Martin Thomas <mthomas@rhrk.uni-kl.de>.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1693
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-10  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Revive tclapi.c from r1650: * Remove superfluous #include directives.  * Fix warnings and API usage to cure its bit rot.  * Build into libhelper library (for now).  Add tclapi.h to export
	tclapi_register_commands().  Register tclapi commands in
	openocd.c:setup_command_handler().  git-svn-id: svn://svn.berlios.de/openocd/trunk@1691
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-10  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> whitespace fixes. Testing
	out on one file first...  git-svn-id: svn://svn.berlios.de/openocd/trunk@1689
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-10  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Michael Bruck <mbruck@digenius.de> use more const git-svn-id: svn://svn.berlios.de/openocd/trunk@1687
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-09  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Michael Bruck <mbruck@digenius.de> ARM11 C99 updates git-svn-id: svn://svn.berlios.de/openocd/trunk@1685
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : plugged bug w/irlen > 32 introduce in 1672 git-svn-id: svn://svn.berlios.de/openocd/trunk@1683
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Brownell <david-b@pacbell.net> DaVinci dm6446 git-svn-id: svn://svn.berlios.de/openocd/trunk@1680
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Michael Fischer <fischermi@t-online.de> fix compile problems on
	Mac git-svn-id: svn://svn.berlios.de/openocd/trunk@1678
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : stm32 profiling wip git-svn-id: svn://svn.berlios.de/openocd/trunk@1676
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : add flush_count jtag queue profiling feature git-svn-id: svn://svn.berlios.de/openocd/trunk@1674
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : in_handler in_check_mask and in_check_value now removed from
	field. Last big patch in the series of JTAG API cleanup.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1672
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : use assert instead of adding code that always runs git-svn-id: svn://svn.berlios.de/openocd/trunk@1670
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : retire jtag_set_check_value git-svn-id: svn://svn.berlios.de/openocd/trunk@1668
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : retire jtag_set_check_value git-svn-id: svn://svn.berlios.de/openocd/trunk@1666
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : first jtag_check_value_mask usage. tested by using "arm7_9
	fast_memory_access enable" & "mdw 0 0x10" git-svn-id: svn://svn.berlios.de/openocd/trunk@1664
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-08  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix typo from hurrying the last commit.  Nothing to see here.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1662
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-08  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Re-order and extend header file tests in configure script.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1660
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-08  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix warnings in ioutil.c; improves loadFile inteface.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1658
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : ouch - typo in last commit git-svn-id: svn://svn.berlios.de/openocd/trunk@1656
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : in_handler removal typo fixed git-svn-id: svn://svn.berlios.de/openocd/trunk@1654
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : refactor to be able to remove more in_handler stuff git-svn-id: svn://svn.berlios.de/openocd/trunk@1652
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix c99 compile errors git-svn-id: svn://svn.berlios.de/openocd/trunk@1650
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : remove usage of in_handler git-svn-id: svn://svn.berlios.de/openocd/trunk@1648
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : remove in_handler usage git-svn-id: svn://svn.berlios.de/openocd/trunk@1646
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : remove in_handler usage git-svn-id: svn://svn.berlios.de/openocd/trunk@1644
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : remove in_handler usage git-svn-id: svn://svn.berlios.de/openocd/trunk@1642
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : remove in_handler usage git-svn-id: svn://svn.berlios.de/openocd/trunk@1640
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : jtag API error handling refactoring.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1638
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : remove in_handler usage git-svn-id: svn://svn.berlios.de/openocd/trunk@1636
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix line endings git-svn-id: svn://svn.berlios.de/openocd/trunk@1634
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Deleted at9sam7_old driver. Nobody has complained about the new
	one yet.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1632
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : another example of removing in_handler usage git-svn-id: svn://svn.berlios.de/openocd/trunk@1630
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-07  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix most pointer cast alignment warnings in arm11.c; fix u16
	memory reads..  git-svn-id: svn://svn.berlios.de/openocd/trunk@1628
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-07  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix stm32x and pic32mx flash pointer cast alignment warnings,
	simplify their last word handling.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1626
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-06  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix pointer cast alignment warnings in target/image.c.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1624
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-06  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix pointer cast alignment issues in svf.c git-svn-id: svn://svn.berlios.de/openocd/trunk@1622
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-06  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix pointer cast alignment warnings in jim.c.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1620
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Dick Hollenbeck <dick@softplc.com> comments & 7 clock TMS reset
	for good measure git-svn-id: svn://svn.berlios.de/openocd/trunk@1618
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-06  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Small changes that might improve stability.  Implemented new
	jtag sequences tap_get_tms_path and tap_get_tms_path_len git-svn-id: svn://svn.berlios.de/openocd/trunk@1616
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Dick Hollenbeck <dick@softplc.com> simplifies XSTATE handling,
	and protects against illegal state transitions that might be in an
	SVF file.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1614
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-06  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix enviorn configure test failure message (thanks to Anders
	Montonen).  git-svn-id: svn://svn.berlios.de/openocd/trunk@1612
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-06  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add autoconf check to determine where environ should be
	declared.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1610
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : retire out_mask - not used anywhere git-svn-id: svn://svn.berlios.de/openocd/trunk@1608
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-05  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : made warning about keep_alive() not being invoked more helpful git-svn-id: svn://svn.berlios.de/openocd/trunk@1606
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-05  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Gabor Juhos juhosg at openwrt.org  MIPS: fix a shift value in
	the MIPS32_R_INST macro git-svn-id: svn://svn.berlios.de/openocd/trunk@1604
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Dirk Behme <dirk.behme@googlemail.com> Add minimalist Cortex A8
	file git-svn-id: svn://svn.berlios.de/openocd/trunk@1602
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Mariano Alvira <mar@devl.org> fixes warning as error about a
	signed vs. unsigned comparison by casting the local unsigned
	variable as (long long).  git-svn-id: svn://svn.berlios.de/openocd/trunk@1600
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-03  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix embedded builds git-svn-id: svn://svn.berlios.de/openocd/trunk@1598
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-03  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix compilation when HAVE_UNISTD_H is not defined.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1596
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-03  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Piotr Esden-Tempski <piotr@esden.net> Mac OS X compile fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@1594
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-02  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add configure check for usb.h; required by a USB drivers.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1592
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Dick Hollenbeck <dick@softplc.com> moved stuff into openocd.c -
	should never have been in main.c in the first place. DLL will now
	build.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1590
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-01  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove superflous spaces from new JTAG table to fix formatting.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1588
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-05-01  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Dick Hollenbeck <dick@softplc.com>: move OPENOCD_VERSION to use
	config.h git-svn-id: svn://svn.berlios.de/openocd/trunk@1586
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Uwe Hermann <uwe@hermann-uwe.de>: Make ICEbear look like other
	targets git-svn-id: svn://svn.berlios.de/openocd/trunk@1584
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-30  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : list board's as well as target config files.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1581
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add static keywords to core target source file data and
	functions.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1579
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix signed/unsigned comparison.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1577
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-30  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : flash fillX now has a verify stage git-svn-id: svn://svn.berlios.de/openocd/trunk@1575
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-30  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Michael Bruck <mbruck@digenius.de>: sys/select.h must preceed
	windows.h.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1573
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-29  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Clear FLASH_SR error flags after flash errors to avoid reset
	befor further flash operations.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1571
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-29  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : More error logging for DAP errors git-svn-id: svn://svn.berlios.de/openocd/trunk@1569
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-29  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : comments and debug code git-svn-id: svn://svn.berlios.de/openocd/trunk@1567
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-29  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Sten <debian@sansys-electronic.com>: add support for ICEbear
	FDTI-based interface.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1565
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-29  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove vestigial last_tms variable from jlink driver.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1563
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-29  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix jlink for Debian/Ubuntu (by Ben Dooks
	<ben-openocd@fluff.org>).  git-svn-id: svn://svn.berlios.de/openocd/trunk@1561
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-29  zwelch <zwelch@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add missing header files to fix C99 compatibility.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1559
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Dick Hollenbeck <dick@softplc.com> and Jeff Williams
	tap_get_tms_path_len() git-svn-id: svn://svn.berlios.de/openocd/trunk@1557
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-28  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix win32 build git-svn-id: svn://svn.berlios.de/openocd/trunk@1555
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Zach Welch <zw@superlucidity.net> fix gw16012 with
	--enable-parport_ppdev git-svn-id: svn://svn.berlios.de/openocd/trunk@1553
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Michael Bruck <mbruck@digenius.de> macros for error handling git-svn-id: svn://svn.berlios.de/openocd/trunk@1551
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : eol-style native git-svn-id: svn://svn.berlios.de/openocd/trunk@1549
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-27  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Added dap baseaddr and dap apid commands git-svn-id: svn://svn.berlios.de/openocd/trunk@1547
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-27  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : SimonQian <simonqian@simonqian.com> patch for error compiling
	vsllink if --enable-verbose-jtag-io is set git-svn-id: svn://svn.berlios.de/openocd/trunk@1545
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-27  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : more error handling git-svn-id: svn://svn.berlios.de/openocd/trunk@1543
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-27  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : SimonQian <simonqian@simonqian.com> AVR wip git-svn-id: svn://svn.berlios.de/openocd/trunk@1540
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-27  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Deleted depreciated files ( new versions are arm_adi_v5.c/h ) git-svn-id: svn://svn.berlios.de/openocd/trunk@1538
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-27  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Changed armv7m and cortexm3 to use nev arm_adi_v5 instead of
	cortex_swjdp.  Added support for accessport ROM table
	identification, dap command.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1536
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-27  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Philippe Vachon <philippe@cowpig.ca> 64 bit host fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@1534
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-27  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Zach Welch <zw@superlucidity.net> wrap _GNU_SOURCE defines git-svn-id: svn://svn.berlios.de/openocd/trunk@1532
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : R.Doss <doss@gmx.de> AT91SAM9260 git-svn-id: svn://svn.berlios.de/openocd/trunk@1530
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-25  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Corrected statement order git-svn-id: svn://svn.berlios.de/openocd/trunk@1528
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-25  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Break ft2232_execute_quie into smaller functions, follows
	restructure of jlink.c git-svn-id: svn://svn.berlios.de/openocd/trunk@1526
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Zach Welch <zw@superlucidity.net> add TAP_SCAN_BYTES macro (1 of
	2) git-svn-id: svn://svn.berlios.de/openocd/trunk@1524
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Uwe Hermann <uwe@hermann-uwe.de> Update udev file git-svn-id: svn://svn.berlios.de/openocd/trunk@1522
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Nicolas Pitre <nico@cam.org> update SheevaPlug interface cfg
	file git-svn-id: svn://svn.berlios.de/openocd/trunk@1520
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-24  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Remove warning git-svn-id: svn://svn.berlios.de/openocd/trunk@1518
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-23  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : stm32.cfg can expect one of 4 id's.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1516
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-23  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Laurentiu Cocanu - fix typo git-svn-id: svn://svn.berlios.de/openocd/trunk@1514
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-22  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Michael Bruck <mbruck@digenius.de> ARM11 various updates + fix
	formatting.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1512
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-22  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Michael Bruck spotted a typo in help messages git-svn-id: svn://svn.berlios.de/openocd/trunk@1510
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-22  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Zach Welch <zw@superlucidity.net> set speed in init git-svn-id: svn://svn.berlios.de/openocd/trunk@1508
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-22  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Zach Welch <zw@superlucidity.net> reorder enum tap_state git-svn-id: svn://svn.berlios.de/openocd/trunk@1506
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-22  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Shrink JLink buffer sizes to specified 2KB courtesy of Jeff
	Williams <jeffw@gadgetworks.com> and Zach Welch
	<zw@superlucidity.net> git-svn-id: svn://svn.berlios.de/openocd/trunk@1504
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-22  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix use of wrong format conversion for size_t (%zu instead of
	%u) git-svn-id: svn://svn.berlios.de/openocd/trunk@1502
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-22  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : refactor jlink_execute_queue courtesy of Zach Welch
	<zw@superlucidity.net> git-svn-id: svn://svn.berlios.de/openocd/trunk@1500
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Zach Welch <zw@superlucidity.net> refactor git-svn-id: svn://svn.berlios.de/openocd/trunk@1498
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Zach Welch <zw@superlucidity.net>  add --enable-verbose* options git-svn-id: svn://svn.berlios.de/openocd/trunk@1496
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Nico Coesel <ncoesel@dealogic.nl> MIPS32 speedup patches git-svn-id: svn://svn.berlios.de/openocd/trunk@1494
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Zach Welch <zw@superlucidity.net>  factor jlink usb_bulk_*_ex
	functions git-svn-id: svn://svn.berlios.de/openocd/trunk@1492
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Zach Welch <zw@superlucidity.net> improve Linux ftd2xx
	configure-time support git-svn-id: svn://svn.berlios.de/openocd/trunk@1490
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-21  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - remove environ warning under win32 build git-svn-id: svn://svn.berlios.de/openocd/trunk@1488
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Zach Welch <zw@superlucidity.net>  fix unused return value
	warnings (2 of 4) git-svn-id: svn://svn.berlios.de/openocd/trunk@1486
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Zach Welch <zw@superlucidity.net> fix str9x type-punned pointer git-svn-id: svn://svn.berlios.de/openocd/trunk@1484
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Zach Welch <zw@superlucidity.net>fix unused return value
	warnings (3 of 4) git-svn-id: svn://svn.berlios.de/openocd/trunk@1482
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Michael Schwingen <rincewind@discworld.dascon.de> add non-CFI
	SST flashs git-svn-id: svn://svn.berlios.de/openocd/trunk@1480
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-20  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix at91rm9200 warning. Thanks Zach Welch <zw@superlucidity.net> - add missing svn props from previous commit git-svn-id: svn://svn.berlios.de/openocd/trunk@1478
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-20  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Zach Welch <zw@superlucidity.net> fix ft2232/presto warnings git-svn-id: svn://svn.berlios.de/openocd/trunk@1476
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Zach Welch <zw@superlucidity.net> use ARM4_5_MODE_ANY instead of
	-1 git-svn-id: svn://svn.berlios.de/openocd/trunk@1474
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Zach Welch <zw@superlucidity.net> fix -Werror warnings git-svn-id: svn://svn.berlios.de/openocd/trunk@1472
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-19  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Added functionality to support jtag_khz for the jlink.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1470
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Zach Welch <zw@superlucidity.net> add missing initializers in
	nand.c git-svn-id: svn://svn.berlios.de/openocd/trunk@1468
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Zach Welch <zw@superlucidity.net> fix signed/unsigned
	comparisons git-svn-id: svn://svn.berlios.de/openocd/trunk@1466
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Zach Welch <zw@superlucidity.net>  use tap_state_t git-svn-id: svn://svn.berlios.de/openocd/trunk@1464
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-18  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : The following patches was applied: - openocd-flash-static-keyword-v3.patch - openocd-lpc2000-fix-erase-obo.patch - openocd-jlink-fix-sign-ptr-warn.patch - openocd-wextra-etm.patch - openocd-wextra-jtag.patch - openocd-add-new-tap-symbols-v6.patch Many thanks to  Zach Welch <zw(at)superlucidity.net> git-svn-id: svn://svn.berlios.de/openocd/trunk@1462
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-15  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Piotr Esden-Tempski <piotr@esden.net> Corrected
	olimex_stm32_h103 board config git-svn-id: svn://svn.berlios.de/openocd/trunk@1460
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-15  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Freddie Chopin <freddie_chopin@op.pl> LPC2378 config file git-svn-id: svn://svn.berlios.de/openocd/trunk@1458
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-14  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Improved (for humans) error reporting for flash programming
	errors.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1456
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-03  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add openocd coding style to texi git-svn-id: svn://svn.berlios.de/openocd/trunk@1454
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-03  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add svn props from previous commit git-svn-id: svn://svn.berlios.de/openocd/trunk@1452
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-03  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Piotr Esden-Tempski <piotr@esden.net> added a board file for the
	Olimex STM32-H103 eval board.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1450
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-03  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Nicolas Pitre nico at cam.org list the new flag in the "nand
	write" help line.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1448
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Nicolas Pitre nico at cam.org The ECC data is automatically
	computed and written to the OOB area when the oob_softecc option is
	passed to the "nand write" command.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1446
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Nicolas Pitre nico at cam.org software ECC computation for NAND
	flash git-svn-id: svn://svn.berlios.de/openocd/trunk@1444
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Nicolas Pitre nico at cam.org Allocating a 6-byte memory
	location with malloc() is rather silly when this can be allocated on
	the stack.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1442
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Uwe Hermann <uwe@hermann-uwe.de> URL references git-svn-id: svn://svn.berlios.de/openocd/trunk@1439
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-04-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix keyword expansion git-svn-id: svn://svn.berlios.de/openocd/trunk@1437
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-30  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add missing usbprog config. patch from Uwe Hermann

	https://lists.berlios.de/pipermail/openocd-development/2009-March/005145.htmlgit-svn-id: svn://svn.berlios.de/openocd/trunk@1435
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-24  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix typo's in last commit git-svn-id: svn://svn.berlios.de/openocd/trunk@1433
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-24  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - update str9 and stm32 comstick configs - add missing svn props git-svn-id: svn://svn.berlios.de/openocd/trunk@1431
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Uwe Hermann <uwe@hermann-uwe.de> Add new board configs: Olimex
	LPC-H2148, Keil MCB2140.  Both boards use an LPC2148, no external
	flash or RAM.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1429
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-23  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Uwe Hermann <uwe@hermann-uwe.de> eal _CPUTAPID entry for the
	LPC2148. I don't know if they're the same for all LPC214x, this
	number is from an Olimex LPC-H2148. The chip on that board is
	LPC2148FBD64.  Also fix a few cosmetic issues and comments in the file and add more
	docs and pointers to the datasheet.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1427
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-23  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Uwe Hermann <uwe@hermann-uwe.de> typo git-svn-id: svn://svn.berlios.de/openocd/trunk@1425
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-20  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add missing svn props from previous commit git-svn-id: svn://svn.berlios.de/openocd/trunk@1423
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-20  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Alan Carvalho de Assis <acassis@gmail.com>  adds support to
	i.MX35 processor.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1421
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-19  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix incorrect str9comstick cfg git-svn-id: svn://svn.berlios.de/openocd/trunk@1419
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Hiroshi Ito <ito@mlb.co.jp> typos git-svn-id: svn://svn.berlios.de/openocd/trunk@1417
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-17  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - remove build warnings git-svn-id: svn://svn.berlios.de/openocd/trunk@1415
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-16  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix issue with cortex_m3 reset run. Thanks Perry Hung -

	https://lists.berlios.de/pipermail/openocd-development/2009-March/005028.htmlgit-svn-id: svn://svn.berlios.de/openocd/trunk@1413
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-12  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Uwe Hermann <uwe@hermann-uwe.de> typos git-svn-id: svn://svn.berlios.de/openocd/trunk@1411
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-11  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Added eol-style props git-svn-id: svn://svn.berlios.de/openocd/trunk@1409
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-11  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Added -endstate to irscan and drscan to support beagleboard
	(omap3530) git-svn-id: svn://svn.berlios.de/openocd/trunk@1407
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-08  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add svn props from previous commit git-svn-id: svn://svn.berlios.de/openocd/trunk@1405
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-08  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Added VID/PID pair to olimex-jtag-tiny-a the non-a version
	already has the vid pid git-svn-id: svn://svn.berlios.de/openocd/trunk@1403
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-07  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Accept/create both A and Non-A ft2232 based descriptions git-svn-id: svn://svn.berlios.de/openocd/trunk@1401
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-05  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Audrius Urmanavičius <didele.deze@gmail.com>  cleanup flash
	fill git-svn-id: svn://svn.berlios.de/openocd/trunk@1399
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Nicolas Pitre <nico@cam.org> making reset+halt on the SheevaPlug
	100% reliable (needs patch in target.c to fix "halt 0").  git-svn-id: svn://svn.berlios.de/openocd/trunk@1397
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-02  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add missing svn props from previous commit git-svn-id: svn://svn.berlios.de/openocd/trunk@1395
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-01  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Kees Jongenburger <kees.jongenburger@gmail.com> rename
	description field of the jtag-tiny.cfg git-svn-id: svn://svn.berlios.de/openocd/trunk@1393
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-01  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Nicolas Pitre nico at cam.org  SheevaPlug board configuration git-svn-id: svn://svn.berlios.de/openocd/trunk@1391
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-01  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Nicolas Pitre nico at cam.org add Feroceon target config file git-svn-id: svn://svn.berlios.de/openocd/trunk@1389
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-01  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Nicolas Pitre nico at cam.org  support for NAND controllers
	without explicit busy signal git-svn-id: svn://svn.berlios.de/openocd/trunk@1387
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-03-01  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Nicolas Pitre nico at cam.org The code unconditionally writes
	into the oob area all the time.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1385
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-02-26  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - stm32x flash driver - add support for stm32105/107 (connectivity
	line) git-svn-id: svn://svn.berlios.de/openocd/trunk@1383
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-02-23  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : tinkered a bit with performance for Cortex flash programming.
	Mainly make it easier to profile as a start.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1380
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-02-22  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : John Woods <johnrw@gmail.com> fix newtap gaffe + rename git-svn-id: svn://svn.berlios.de/openocd/trunk@1378
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-02-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Holger Schurig <hs4233@mail.mn-solutions.de> incorporate some
	comments from Rick git-svn-id: svn://svn.berlios.de/openocd/trunk@1376
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-02-17  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : zy1000 1.49 snapshot git-svn-id: svn://svn.berlios.de/openocd/trunk@1374
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-02-13  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - guess-rev.sh now works as expected when build_dir is not the same
	as src_dir git-svn-id: svn://svn.berlios.de/openocd/trunk@1372
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-02-10  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Use C89/C99/C++ compliant boolean types git-svn-id: svn://svn.berlios.de/openocd/trunk@1370
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-02-09  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix native win32 build issues git-svn-id: svn://svn.berlios.de/openocd/trunk@1368
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-02-03  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Cable driver helper API courtesy of Dick Hollenbeck
	<dick@softplc.com> - Formatting changes from uncrustify git-svn-id: svn://svn.berlios.de/openocd/trunk@1366
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-02-03  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add uncrustify config file and helper script git-svn-id: svn://svn.berlios.de/openocd/trunk@1364
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : update symbols to match source file git-svn-id: svn://svn.berlios.de/openocd/trunk@1362
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-23  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : xvsf player fixes by Dick Hollenbeck <dick@softplc.com> git-svn-id: svn://svn.berlios.de/openocd/trunk@1360
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-23  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Search path fixes for MinGW builds.  Courtesy of Dimitar
	Dimitrov <dinuxbg@gmail.com> git-svn-id: svn://svn.berlios.de/openocd/trunk@1358
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-23  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : vsllink support for stable clocks by Simon Qian
	<simonqian@SimonQian.com> git-svn-id: svn://svn.berlios.de/openocd/trunk@1356
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-20  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix for incorrect filename in include for at91sam9260 in
	unknown-board-atmel-at91sam9260.cfg git-svn-id: svn://svn.berlios.de/openocd/trunk@1353
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-20  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add --enable-release to docs git-svn-id: svn://svn.berlios.de/openocd/trunk@1351
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-20  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add axm0432 interface config courtesy of Alan Carvalho de Assis
	<acassis@gmail.com> git-svn-id: svn://svn.berlios.de/openocd/trunk@1349
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-20  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix 'make maintainer-clean' courtesy of Zach Welch
	<zw@superlucidity.net> git-svn-id: svn://svn.berlios.de/openocd/trunk@1345
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-20  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix support for ADuC702x flash.  Courtesy of Michael Ashton
	<data@gtf.org> git-svn-id: svn://svn.berlios.de/openocd/trunk@1343
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-19  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - remove unused includes, fixes build issues under FreeBSD git-svn-id: svn://svn.berlios.de/openocd/trunk@1341
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-19  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : SVF player courtesy of Simon Qian <simonqian@SimonQian.com> git-svn-id: svn://svn.berlios.de/openocd/trunk@1339
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-17  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix guess-rev.sh where the builtin echo doesn't support -n git-svn-id: svn://svn.berlios.de/openocd/trunk@1337
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-16  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - make guess-rev.sh work with msys git-svn-id: svn://svn.berlios.de/openocd/trunk@1333
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-16  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add missing bitq and rlink files to distribution git-svn-id: svn://svn.berlios.de/openocd/trunk@1331
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-15  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add missing svn props from 1323 commit git-svn-id: svn://svn.berlios.de/openocd/trunk@1324
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-15  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Alan Carvalho de Assis <acassis@gmail.com> imx31pdk.cfg reset
	init event git-svn-id: svn://svn.berlios.de/openocd/trunk@1322
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : wip git-svn-id: svn://svn.berlios.de/openocd/trunk@1320
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Alan Carvalho de Assis <acassis@gmail.com> cfg file to
	initialize the iMX27ADS board.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1318
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Alan Carvalho de Assis <acassis@gmail.com> small fix to move us
	in the right direction.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1316
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-13  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix mips issues with newer versions of gdb - we simply add more dummy registers git-svn-id: svn://svn.berlios.de/openocd/trunk@1314
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-09  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : wip git-svn-id: svn://svn.berlios.de/openocd/trunk@1312
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-09  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : allow issuing reset_config on the fly. Faster turnaround times
	in testing.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1310
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-09  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Dick Hollenbeck <dick@softplc.com> adds jtag_add_clocks() and
	implements those in the bitbang and ft2232.c.   nearly a full
	rewrite of the xsvf.c. improved some messaging only affected by
	_DEBUG_JTAG_IO_ git-svn-id: svn://svn.berlios.de/openocd/trunk@1308
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-08  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - a few more docs tweaks git-svn-id: svn://svn.berlios.de/openocd/trunk@1306
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Dick Hollenbeck <dick@softplc.com>  SVF to XSVF converter and
	the XSVF dumper take #2 git-svn-id: svn://svn.berlios.de/openocd/trunk@1304
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-05  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add missing svn props from r1299 commit git-svn-id: svn://svn.berlios.de/openocd/trunk@1302
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-05  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : John McCarthy <jgmcc@magma.ca> formatting fix of debug output git-svn-id: svn://svn.berlios.de/openocd/trunk@1300
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : eol-style native git-svn-id: svn://svn.berlios.de/openocd/trunk@1298
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : John McCarthy <jgmcc@magma.ca> pic32mx flash wip git-svn-id: svn://svn.berlios.de/openocd/trunk@1296
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2009-01-01  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add gdb pipe support to native win32 (--pipe option) git-svn-id: svn://svn.berlios.de/openocd/trunk@1294
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-28  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix missing/incorrect svn file props git-svn-id: svn://svn.berlios.de/openocd/trunk@1292
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-27  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Added another test build configuration git-svn-id: svn://svn.berlios.de/openocd/trunk@1290
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-27  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Missed the svn add on earlier commit, duh git-svn-id: svn://svn.berlios.de/openocd/trunk@1288
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-27  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Added note to user manual for packagers of OpenOCD git-svn-id: svn://svn.berlios.de/openocd/trunk@1286
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-27  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Some systems report linux as host, others linux-gnu... grrr git-svn-id: svn://svn.berlios.de/openocd/trunk@1284
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-27  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : From Lou.openocd012@fixit.nospammail.net git-svn-id: svn://svn.berlios.de/openocd/trunk@1282
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-27  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Added dongle VSLLINK - from Simon Qian git-svn-id: svn://svn.berlios.de/openocd/trunk@1280
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-27  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : From Dirk Behme - Further docu fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@1278
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-27  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Renamed build.tests to build.test1 git-svn-id: svn://svn.berlios.de/openocd/trunk@1276
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-24  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Typos found by miceal catudal git-svn-id: svn://svn.berlios.de/openocd/trunk@1274
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-23  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : httpd wip git-svn-id: svn://svn.berlios.de/openocd/trunk@1272
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-22  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : httpd wip git-svn-id: svn://svn.berlios.de/openocd/trunk@1269
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-22  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Dirk Behme <dirk.behme@googlemail.com>  Add missing tap-enable and tap-disable events to documentation.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1267
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-22  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : bumped a LOG_INFO to LOG_DEBUG level to reduce excessive output
	for normal execution git-svn-id: svn://svn.berlios.de/openocd/trunk@1265
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Dick Hollenbeck <dick@softplc.com> - This patch adds JTAG state
	tracking to dummy.c git-svn-id: svn://svn.berlios.de/openocd/trunk@1263
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Dick Hollenbeck <dick@softplc.com> better comments git-svn-id: svn://svn.berlios.de/openocd/trunk@1261
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Dick Hollenbeck <dick@softplc.com> convert macros to inline
	fn's.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1259
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-17  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : check syntax for init/version git-svn-id: svn://svn.berlios.de/openocd/trunk@1257
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-17  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : houskeeping git-svn-id: svn://svn.berlios.de/openocd/trunk@1255
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : work in progress to hook up libmicrohttpd + tcl integration git-svn-id: svn://svn.berlios.de/openocd/trunk@1251
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Dirk Behme <dirk.behme@googlemail.com> Fix some typos in
	documentation git-svn-id: svn://svn.berlios.de/openocd/trunk@1249
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : allow setting/reading gdb_port at any time git-svn-id: svn://svn.berlios.de/openocd/trunk@1247
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-15  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add missing svn props from r1243 commit git-svn-id: svn://svn.berlios.de/openocd/trunk@1245
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-15  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : sync up to tap_xxx rename + add with-ioutil for standalone
	openocd implemetnations git-svn-id: svn://svn.berlios.de/openocd/trunk@1243
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-15  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fast_load profiling tool moved to target.c git-svn-id: svn://svn.berlios.de/openocd/trunk@1241
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-13  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Updates and fixes from Kees Jongenburger git-svn-id: svn://svn.berlios.de/openocd/trunk@1239
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-13  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Add JTAG tap events for enable/disable git-svn-id: svn://svn.berlios.de/openocd/trunk@1237
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-13  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Change tap_state naming to be consistent with SVF documentation.  Courtesy of Dick Hollenbeck <dick@softplc.com> git-svn-id: svn://svn.berlios.de/openocd/trunk@1232
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-12  kc8apf <kc8apf@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Allow -expected-id to be specified multiple times when creating
	a jtag tap git-svn-id: svn://svn.berlios.de/openocd/trunk@1229
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-11  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added Axiom AXM-0432 to texi - updated missing jtag dongle url's in texi - reformat and remove whitespace from last commit git-svn-id: svn://svn.berlios.de/openocd/trunk@1227
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-11  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - typo with flash bank help command - typo with flash erase_sector in texi git-svn-id: svn://svn.berlios.de/openocd/trunk@1225
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-10  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : More fixes thanks to Kees Jongenburger git-svn-id: svn://svn.berlios.de/openocd/trunk@1223
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-10  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix from Kees Jongenburger git-svn-id: svn://svn.berlios.de/openocd/trunk@1221
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-06  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Test of commit email from duane git-svn-id: svn://svn.berlios.de/openocd/trunk@1219
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-05  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Karl Beldan <karl.beldan@gmail.com> - The ibcr count for hw
	instruction breakpoint registers was decremented with soft
	breakpoints and breakpoint length error.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1215
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : zy1000 1.48 snapshot git-svn-id: svn://svn.berlios.de/openocd/trunk@1213
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : delete obsolete code git-svn-id: svn://svn.berlios.de/openocd/trunk@1211
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-04  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fix for Hiroshi Ito discovery of mis-aligned memory allocation git-svn-id: svn://svn.berlios.de/openocd/trunk@1205
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-03  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - incorrect str9 irmask used in config files git-svn-id: svn://svn.berlios.de/openocd/trunk@1203
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Kees Jongenburger <kees.jongenburger@gmail.com> - now compiles git-svn-id: svn://svn.berlios.de/openocd/trunk@1201
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-01  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : "Theodore A. Roth" <taroth@gmail.com> fixes to distcheck git-svn-id: svn://svn.berlios.de/openocd/trunk@1199
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-01  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : update zy1000 to svn head jtag api git-svn-id: svn://svn.berlios.de/openocd/trunk@1197
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-12-01  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : wip git-svn-id: svn://svn.berlios.de/openocd/trunk@1195
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-30  duane <duane@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Test checkin from commandline git-svn-id: svn://svn.berlios.de/openocd/trunk@1193
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-27  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix issue with luminary flash driver and tail bytes git-svn-id: svn://svn.berlios.de/openocd/trunk@1191
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-27  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - stm32x flash driver: add support for low density devices git-svn-id: svn://svn.berlios.de/openocd/trunk@1189
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-26  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fixes segfault using the targets cmd if multiple targets defined git-svn-id: svn://svn.berlios.de/openocd/trunk@1187
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : friendlier error messages git-svn-id: svn://svn.berlios.de/openocd/trunk@1185
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-21  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add new cortex_m3 maskisr cmd git-svn-id: svn://svn.berlios.de/openocd/trunk@1181
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-20  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - preserve cortex_m3 C_MASKINTS during resume/step git-svn-id: svn://svn.berlios.de/openocd/trunk@1179
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : jtag_get_device() now returns NULL and reports error instead of
	invoking exit() git-svn-id: svn://svn.berlios.de/openocd/trunk@1176
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : big endian fix for GDB. Probably fixes a memory corruption(not
	reported) as well.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1174
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-14  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - stops multiple calls to examine from allocating the breakpoint
	arrays git-svn-id: svn://svn.berlios.de/openocd/trunk@1171
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-13  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : big endian software breakpoint bogus error messages fixed git-svn-id: svn://svn.berlios.de/openocd/trunk@1167
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-13  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : nios wip git-svn-id: svn://svn.berlios.de/openocd/trunk@1165
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-12  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - slight mips32 cleanup/reformat - add missing svn props git-svn-id: svn://svn.berlios.de/openocd/trunk@1159
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fixes (more or less) random SEGFAULT upon invoking
	script_command().  git-svn-id: svn://svn.berlios.de/openocd/trunk@1156
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-10  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : broadcast mac address in UDP hello message git-svn-id: svn://svn.berlios.de/openocd/trunk@1152
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-10  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : minor cleanup git-svn-id: svn://svn.berlios.de/openocd/trunk@1149
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : ocd_flash_banks now returns empty list when no flash banks are
	configured instead of failing. Allows more orthogonal
	implementations of tcl code.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1147
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : ocd_flash_banks now returns empty list when no flash banks are
	configured instead of failing. Allows more orthogonal
	implementations of tcl code.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1144
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-06  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - remove build warnings - added svn props for newly added files git-svn-id: svn://svn.berlios.de/openocd/trunk@1142
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : s3c6410 chip git-svn-id: svn://svn.berlios.de/openocd/trunk@1140
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-05  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : 926ejs target uses rclk. Cleaned up jtag_khz output a bit.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1138
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-05  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : wip git-svn-id: svn://svn.berlios.de/openocd/trunk@1136
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-05  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : disable continous polling while srst is asserted and power
	dropout is detected git-svn-id: svn://svn.berlios.de/openocd/trunk@1134
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : arm7_9_execute_sys_speed error propagation. Found by code
	inspection, no observed problems as such.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1132
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Added Tcl escaping to FAQ git-svn-id: svn://svn.berlios.de/openocd/trunk@1130
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-03  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix issue with jlink/libusb timeout under linux - add missing svn props git-svn-id: svn://svn.berlios.de/openocd/trunk@1128
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-03  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Rick Altherr <kc8apf@kc8apf.net> - fix warnings git-svn-id: svn://svn.berlios.de/openocd/trunk@1126
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : invoke target_create() once git-svn-id: svn://svn.berlios.de/openocd/trunk@1124
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Alan Carvalho de Assis <acassis@gmail.com> imx27 config file git-svn-id: svn://svn.berlios.de/openocd/trunk@1122
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Rick Altherr <kc8apf@kc8apf.net> -  fix flash write_bank output.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1120
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-11-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : no longer used git-svn-id: svn://svn.berlios.de/openocd/trunk@1118
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-31  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Rick Altherr <kc8apf@kc8apf.net> switch to new syntax for target
	events git-svn-id: svn://svn.berlios.de/openocd/trunk@1116
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-30  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Hongtao Zheng single step fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@1113
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Kees Jongenburger <kees.jongenburger@gmail.com> update syntax git-svn-id: svn://svn.berlios.de/openocd/trunk@1111
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Hongtao Zheng  - fix a simulation error for "BX PC" git-svn-id: svn://svn.berlios.de/openocd/trunk@1109
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-27  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Kees Jongenburger <kees.jongenburger@gmail.com> old" syntax
	target command appears to be broken this patch addresses this issue git-svn-id: svn://svn.berlios.de/openocd/trunk@1107
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-27  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Hongtao Zheng - add simulation because previous functions could
	not halt for instructions that next pc equal to the current pc.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1105
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-27  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added option to use ramdisk instead of flash jffs2 git-svn-id: svn://svn.berlios.de/openocd/trunk@1103
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-24  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix native mingw build if gettimeofday not defined.  - reformat whitespace in startup.tcl git-svn-id: svn://svn.berlios.de/openocd/trunk@1101
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-23  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix working memory location git-svn-id: svn://svn.berlios.de/openocd/trunk@1098
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-23  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : only log BUG: (do not return error) in the case of unknown debug
	reason(0xc) git-svn-id: svn://svn.berlios.de/openocd/trunk@1096
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-22  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : load and verify are now synonymous to load/verify_image git-svn-id: svn://svn.berlios.de/openocd/trunk@1092
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-22  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : produce syntax error git-svn-id: svn://svn.berlios.de/openocd/trunk@1090
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-22  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Laurentiu Cocanu - more help text git-svn-id: svn://svn.berlios.de/openocd/trunk@1088
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-22  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : version number keyword expansion handling git-svn-id: svn://svn.berlios.de/openocd/trunk@1086
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : remove duplicate target git-svn-id: svn://svn.berlios.de/openocd/trunk@1084
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-17  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add link in texi docs git-svn-id: svn://svn.berlios.de/openocd/trunk@1081
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-17  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - remove texi warnings git-svn-id: svn://svn.berlios.de/openocd/trunk@1079
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : sleep command now prints out target debugmsgs w/anything like
	usable performance git-svn-id: svn://svn.berlios.de/openocd/trunk@1076
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Laurentiu Cocanu - integrated new tcl target command docs git-svn-id: svn://svn.berlios.de/openocd/trunk@1073
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : adding concept of production script git-svn-id: svn://svn.berlios.de/openocd/trunk@1071
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added capture command to capture log output. Useful when wanting
	to capture log output from tcl procedures that invoke openocd
	commands git-svn-id: svn://svn.berlios.de/openocd/trunk@1069
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : unsik Kim <donari75@gmail.com> - mflash support git-svn-id: svn://svn.berlios.de/openocd/trunk@1067
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-15  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix tcl_port typo in docs - remove build warning from openocd.c - add missing svn props git-svn-id: svn://svn.berlios.de/openocd/trunk@1065
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-15  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : 김운식 <donari75@gmail.com> spotted a bug in target_write_u8 git-svn-id: svn://svn.berlios.de/openocd/trunk@1063
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Laurentiu Cocanu - fix error handling git-svn-id: svn://svn.berlios.de/openocd/trunk@1061
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Laurentiu Cocanu - more error handling fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@1059
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : clarified jtag_ntrst_delay option git-svn-id: svn://svn.berlios.de/openocd/trunk@1056
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : testing of syntax error in reset and at startup git-svn-id: svn://svn.berlios.de/openocd/trunk@1054
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added warning to use GDB 6.7 or newer git-svn-id: svn://svn.berlios.de/openocd/trunk@1052
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : John McCarthy <jgmcc@magma.ca> two patches add a mips_m4k target
	option (ejtag_reset) to cause a reset command to use the EJTAG
	Peripheral and System Reset in addition to srst.  This is for
	targets like the wrt54gl which do not connect the srst to a system
	reset (I believe it just goes to a GPIO).  git-svn-id: svn://svn.berlios.de/openocd/trunk@1050
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : reset cleanup git-svn-id: svn://svn.berlios.de/openocd/trunk@1048
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-13  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : SEGFAULT gaffe in dummy register handling git-svn-id: svn://svn.berlios.de/openocd/trunk@1046
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-13  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix crash when connecting GDB to powered down target git-svn-id: svn://svn.berlios.de/openocd/trunk@1044
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-13  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fixed gaffes in reset script handling + improved error messages
	a bit. The file and line # of the syntax error in a reset script is
	now printed.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1042
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-12  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* :  Fix problems with DCC downloads routine crashing silently.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1040
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-10  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : John McCarthy <jgmcc@magma.ca> openocd-usb.cfg added git-svn-id: svn://svn.berlios.de/openocd/trunk@1038
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-09  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : enumeration of threads for testing purposes.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1035
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-09  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added busy sleep (for testing purposes) git-svn-id: svn://svn.berlios.de/openocd/trunk@1033
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Richard Missenden exit now works during startup script git-svn-id: svn://svn.berlios.de/openocd/trunk@1031
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : John McCarthy <jgmcc@magma.ca> adds support for DMA mode access
	as supported by EJTAG 1.0/2.0 processors git-svn-id: svn://svn.berlios.de/openocd/trunk@1029
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : reduce patch problems by moving $xxx expansion into seperate fn git-svn-id: svn://svn.berlios.de/openocd/trunk@1027
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Frederik Kriewitz <frederik at kriewitz.eu> Segmentation fault
	fix.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1025
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Georg Acher <acher@in.tum.de> - arm11 wip. run algorithm + small
	init bugfix.  git-svn-id: svn://svn.berlios.de/openocd/trunk@1023
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : basic smoketest on lm3s3748.elf git-svn-id: svn://svn.berlios.de/openocd/trunk@1020
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : better keep_alive() handling git-svn-id: svn://svn.berlios.de/openocd/trunk@1018
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-05  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Georg Acher <acher@in.tum.de> corrected TDO sampling git-svn-id: svn://svn.berlios.de/openocd/trunk@1016
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-03  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : GDB alive fixes for verify_image git-svn-id: svn://svn.berlios.de/openocd/trunk@1014
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-10-01  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fixed gaffe: disable interrupts reset init script git-svn-id: svn://svn.berlios.de/openocd/trunk@1012
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-09-29  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - at91sam7.c remove build warnings git-svn-id: svn://svn.berlios.de/openocd/trunk@1010
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-09-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* :  I do not know why this is necessary, but it fixes strange effects 		       (step/resume cause a NMI after reset) on LM3S6918 --
			       Michael Schwingen git-svn-id: svn://svn.berlios.de/openocd/trunk@1008
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-09-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : wip git-svn-id: svn://svn.berlios.de/openocd/trunk@1006
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-09-25  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - update docs for aduc702x flash driver git-svn-id: svn://svn.berlios.de/openocd/trunk@996
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-09-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix noise in gdb console when single stepping. Remove printing
	of log before processing halted event.  git-svn-id: svn://svn.berlios.de/openocd/trunk@994
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-09-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* :  "marcel" <M.W.Wijlaars@tue.nl>, I have the ADuC702x flashdriver working again (see attachment). It
	adds the option to erase and write the ADuC702x flash git-svn-id: svn://svn.berlios.de/openocd/trunk@992
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-09-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Removed some obsolete stuff + Pushing things in the direction of
	openocd.texi git-svn-id: svn://svn.berlios.de/openocd/trunk@990
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-09-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : put instructions on how to report bugs onto the users radar git-svn-id: svn://svn.berlios.de/openocd/trunk@988
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-09-12  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : follow up to keep_alive() fix. process target events before
	returning from reset procedure.  git-svn-id: svn://svn.berlios.de/openocd/trunk@986
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-09-12  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Duane Ellis: target_process_reset is now implemented in tcl.
	This allows better control from target configuration scripts.  git-svn-id: svn://svn.berlios.de/openocd/trunk@984
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-09-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : typo fixed.  git-svn-id: svn://svn.berlios.de/openocd/trunk@982
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-09-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Duane Ellis, added clock command.  git-svn-id: svn://svn.berlios.de/openocd/trunk@980
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-09-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : s3c2440 OpenMoko target script git-svn-id: svn://svn.berlios.de/openocd/trunk@978
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-09-01  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Removed target->reset_mode, no longer used git-svn-id: svn://svn.berlios.de/openocd/trunk@976
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-09-01  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : retired, nothing came of it.  git-svn-id: svn://svn.berlios.de/openocd/trunk@974
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-27  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : comment about slow RTCK git-svn-id: svn://svn.berlios.de/openocd/trunk@972
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added 1000ms timeout git-svn-id: svn://svn.berlios.de/openocd/trunk@970
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : RCLK is not supported, return error instead of crashing.  git-svn-id: svn://svn.berlios.de/openocd/trunk@968
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fixed bug in arm11 examine code.  git-svn-id: svn://svn.berlios.de/openocd/trunk@966
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : sync with Jim Tcl repository.  git-svn-id: svn://svn.berlios.de/openocd/trunk@964
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : duan ellis target tcl work in progress   converts a number of 'simple string lookup tables' into NVP
	  tables.  These NVP tables will be used by various commands coming
	in the next patch.  git-svn-id: svn://svn.berlios.de/openocd/trunk@962
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-23  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - clear any existing breakpoints/watchpoints when restarting in gdb
	extended remote mode git-svn-id: svn://svn.berlios.de/openocd/trunk@960
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-22  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix win32 build issues from previous jim patch git-svn-id: svn://svn.berlios.de/openocd/trunk@958
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-20  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added gdb timeout handling + error propagation git-svn-id: svn://svn.berlios.de/openocd/trunk@956
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-20  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : lm3s3748 config file git-svn-id: svn://svn.berlios.de/openocd/trunk@954
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-20  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : sharpen error propagation a wee bit.  git-svn-id: svn://svn.berlios.de/openocd/trunk@952
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-20  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Daniel Gimpelevich fix reset halt on feroceon git-svn-id: svn://svn.berlios.de/openocd/trunk@950
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-20  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : duane ellis: fix warning git-svn-id: svn://svn.berlios.de/openocd/trunk@948
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fixed warning git-svn-id: svn://svn.berlios.de/openocd/trunk@946
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : make target_wait_state() usable from other places, made
	LOG_USER() output LOG_DEBUG() output. Avoids flooding logs in
	certain cases and OpenOCD will output error message if the halt
	fails.  git-svn-id: svn://svn.berlios.de/openocd/trunk@944
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : search and replace usleep(1000) with alive_sleep(1) to avoid GDB
	timeouts.  git-svn-id: svn://svn.berlios.de/openocd/trunk@942
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added some alive_sleep()'s git-svn-id: svn://svn.berlios.de/openocd/trunk@940
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added alive_sleep() function to let GDB alive packets be sent git-svn-id: svn://svn.berlios.de/openocd/trunk@938
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : duane ellis: (A) a new concept called "Name Value Pair" or NVP,
	in simple terms: Think: "String" and "Value". There can be many
	strings - all related to a single value, for examle: "T", "t", "y",
	"1", "yes", all can represent "truth", the reverse mapping is more
	simplistic - the first matching number wins.  (B) a new "getopt" like feature for Jim - that simplifies argument
	parsing in complex functions, normally this would be used in
	conjunction with either an NVP table of options, or a more simpler
	Enumeration  table.  In contrast to the GNU "getopt" package, this
	is more of a "object model or code oriented" solution then a pure
	data structure used by GNU getopt, or the main stream Tcl/Tk option
	processing.  git-svn-id: svn://svn.berlios.de/openocd/trunk@936
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix comment w.r.t. start address for RAM git-svn-id: svn://svn.berlios.de/openocd/trunk@934
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : removed a couple of exit()'s from error handling.  git-svn-id: svn://svn.berlios.de/openocd/trunk@932
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> one
	more parport device git-svn-id: svn://svn.berlios.de/openocd/trunk@930
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : more error propagation git-svn-id: svn://svn.berlios.de/openocd/trunk@928
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : openocd.texi is the authoratitive source for documentation. Wiki
	is dead.  git-svn-id: svn://svn.berlios.de/openocd/trunk@926
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-17  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : deleted superfluous sam7s256 which was identical to sam7x256 git-svn-id: svn://svn.berlios.de/openocd/trunk@924
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-15  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : removed obsolete command.  git-svn-id: svn://svn.berlios.de/openocd/trunk@922
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : arm7/9 breakpoint cleanup. arm7_9 sw/hw commands retired.
	openocd.texi is alerady updated.  git-svn-id: svn://svn.berlios.de/openocd/trunk@920
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : documentation wip for upcoming patch.  git-svn-id: svn://svn.berlios.de/openocd/trunk@918
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-13  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : force lpc2148 target into ARM state.  git-svn-id: svn://svn.berlios.de/openocd/trunk@916
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-13  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added global gdb breakpoint override configuration command git-svn-id: svn://svn.berlios.de/openocd/trunk@914
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-13  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Clear all dangling breakpoints upon GDB connection.  git-svn-id: svn://svn.berlios.de/openocd/trunk@912
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-13  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : return halted signal if step/continue fails git-svn-id: svn://svn.berlios.de/openocd/trunk@910
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix output from jtag_khz when only jtag_speed has been invoked git-svn-id: svn://svn.berlios.de/openocd/trunk@908
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : propagate error code in case of "reset" failing.  git-svn-id: svn://svn.berlios.de/openocd/trunk@906
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix error message git-svn-id: svn://svn.berlios.de/openocd/trunk@904
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-08  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix build issues under win32 (mingw) git-svn-id: svn://svn.berlios.de/openocd/trunk@902
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : default reset in help text - run git-svn-id: svn://svn.berlios.de/openocd/trunk@900
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Kuehling <dvdkhlng@gmx.de> - added jim-eventloop.c git-svn-id: svn://svn.berlios.de/openocd/trunk@898
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-07  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - correct BUILD_ECOSBOARD definition is server.c git-svn-id: svn://svn.berlios.de/openocd/trunk@896
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-06  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added svn props for previously added file git-svn-id: svn://svn.berlios.de/openocd/trunk@894
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-05  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : GDB monitor commands now also get halted state upon e.g. "reset
	halt".  git-svn-id: svn://svn.berlios.de/openocd/trunk@892
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-05  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Duane Ellis: fix warnings git-svn-id: svn://svn.berlios.de/openocd/trunk@890
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-05  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : define resetting the target into the halted or running state as
	an atomic operation.  git-svn-id: svn://svn.berlios.de/openocd/trunk@888
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-08-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : TAP_TLR won't work in a pathmove sequence. OpenOCD shouldn't and
	doesn't need to support this.  git-svn-id: svn://svn.berlios.de/openocd/trunk@886
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-31  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : wait up to 1 second for halted state upon reset init/halt.  git-svn-id: svn://svn.berlios.de/openocd/trunk@884
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-30  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : warning output upon connection problems.  git-svn-id: svn://svn.berlios.de/openocd/trunk@882
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-28  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added run_and_halt_time to deprecated/removed functions section git-svn-id: svn://svn.berlios.de/openocd/trunk@880
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fixed gaffe mea culpa git-svn-id: svn://svn.berlios.de/openocd/trunk@878
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-27  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : working notes.  git-svn-id: svn://svn.berlios.de/openocd/trunk@876
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-26  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - merged mips target into svn trunk git-svn-id: svn://svn.berlios.de/openocd/trunk@874
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added yours sincerely for files where I feel that I've made
	non-trivial contributions.  git-svn-id: svn://svn.berlios.de/openocd/trunk@872
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : more error message cleanup. invalid args & syntax errors both
	now print arguments of command.  git-svn-id: svn://svn.berlios.de/openocd/trunk@870
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : retire daemon_startup git-svn-id: svn://svn.berlios.de/openocd/trunk@868
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Better handling of OpenOCD command invocation result/context.  git-svn-id: svn://svn.berlios.de/openocd/trunk@866
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-23  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - comment about dummy ack '+' char from gdb git-svn-id: svn://svn.berlios.de/openocd/trunk@864
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-23  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix typo git-svn-id: svn://svn.berlios.de/openocd/trunk@862
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-23  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : handle end of line comments to improve compatibility with event
	scripts git-svn-id: svn://svn.berlios.de/openocd/trunk@860
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-22  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix bug with stm32 high density write protection git-svn-id: svn://svn.berlios.de/openocd/trunk@858
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-22  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Spen: startup.tcl cross compile support git-svn-id: svn://svn.berlios.de/openocd/trunk@856
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-22  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : very slightly improved error message for not being able to find
	scripts git-svn-id: svn://svn.berlios.de/openocd/trunk@854
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Allows config scripts to override handling of 'R'(restart) GDB
	packet.  git-svn-id: svn://svn.berlios.de/openocd/trunk@852
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : update jtag_speed/khz docs a bit.  git-svn-id: svn://svn.berlios.de/openocd/trunk@850
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : cross compile fix git-svn-id: svn://svn.berlios.de/openocd/trunk@848
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Duane Ellis <openocd@duaneellis.com> stm32 peripherals scripts git-svn-id: svn://svn.berlios.de/openocd/trunk@846
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-20  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : BUG: prefix to timeout for gdb keep alive packets.  git-svn-id: svn://svn.berlios.de/openocd/trunk@844
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-20  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Duane Ellis <openocd@duaneellis.com> - script commands for stm32 git-svn-id: svn://svn.berlios.de/openocd/trunk@842
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-20  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Duane Ellis <openocd@duaneellis.com>  improve error message in Jim when sourcing a file fails.
	Previously it did not tell you the CWD Jim was using as its
	reference point.  (Helpful when script filenames are a relative
	path) git-svn-id: svn://svn.berlios.de/openocd/trunk@840
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : throw exception upon syntax error.  git-svn-id: svn://svn.berlios.de/openocd/trunk@838
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : clarify error message w.r.t. not being able to set breakpoint git-svn-id: svn://svn.berlios.de/openocd/trunk@836
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : This allows overriding builtin openocd commands.  git-svn-id: svn://svn.berlios.de/openocd/trunk@834
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : "reset" without arguments now execute a "reset run".  the reset mode argument to the target command is deprecated(ignored
	w/error message).  git-svn-id: svn://svn.berlios.de/openocd/trunk@832
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-18  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix incorrectly registered function openocd_array2mem - removed unused variables - reformatted lpc288x.[ch] - fixed helper/Makefile.am dependencies - add correct svn props to added files git-svn-id: svn://svn.berlios.de/openocd/trunk@829
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : keep_alive() fix for reset warnings.  git-svn-id: svn://svn.berlios.de/openocd/trunk@827
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Duane Ellis <openocd@duaneellis.com> more interface files.  git-svn-id: svn://svn.berlios.de/openocd/trunk@825
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added missing "reset+load" sequence.  git-svn-id: svn://svn.berlios.de/openocd/trunk@823
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-17  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Charles Hardin ckhardin at gmail.com   Instead of stashing the
	context in a global variable, just use the "context" associated with
	the interp structure being passed around And fixed the message referring to mem2array in the array2mem
	function git-svn-id: svn://svn.berlios.de/openocd/trunk@821
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-17  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Charles Hardin ckhardin at gmail.com There isn't a real value to the cfg_cmd_ctx since everything should
	be run thru the initial context created at start.  git-svn-id: svn://svn.berlios.de/openocd/trunk@819
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-17  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - reverted resume_target to old behaviour git-svn-id: svn://svn.berlios.de/openocd/trunk@817
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fixes to \ and / handling for OpenOCD git-svn-id: svn://svn.berlios.de/openocd/trunk@815
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : print out jim error message stack trace in expected order(look
	at any C++ or Java debugger for instance).  git-svn-id: svn://svn.berlios.de/openocd/trunk@813
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : print syntax for command upon syntax error.  git-svn-id: svn://svn.berlios.de/openocd/trunk@811
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-15  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : feeble beginnings for tcl api rules.  git-svn-id: svn://svn.berlios.de/openocd/trunk@809
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Charles Hardin <ckhardin@gmail.com> This evaluates the file at the correct level for the interpreter and
	the sets and all the globals are then done as expected.  added a const to find_file function to avoid typecasting git-svn-id: svn://svn.berlios.de/openocd/trunk@806
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-13  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added svn props for newly added files git-svn-id: svn://svn.berlios.de/openocd/trunk@804
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-13  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Duane Ellis <openocd@duaneellis.com> fix to tcl puts git-svn-id: svn://svn.berlios.de/openocd/trunk@802
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-12  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - remove requirement for file2c.tcl git-svn-id: svn://svn.berlios.de/openocd/trunk@800
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-12  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : testing/*.tcl sample & test code git-svn-id: svn://svn.berlios.de/openocd/trunk@798
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-11  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - configure check added for tclsh - startup.c manually added to clean deps git-svn-id: svn://svn.berlios.de/openocd/trunk@796
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Charles Hardin ckhardin at gmail.com This address the >32 bit problem with drscan also added a check for
	bypass in the execute since this will manifest itself as a memory
	corruption when this check helps to debug the problem alot easier git-svn-id: svn://svn.berlios.de/openocd/trunk@794
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : work in progress to improve help git-svn-id: svn://svn.berlios.de/openocd/trunk@792
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : .cfg files are now executed as Jim Tcl. Commands that terminate
	script w/error message.  git-svn-id: svn://svn.berlios.de/openocd/trunk@790
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : working notes.  git-svn-id: svn://svn.berlios.de/openocd/trunk@788
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-10  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Charles Hardin <ckhardin@gmail.com> Add semantics to support memwrite(32,16,8) with an array2mem command
	Move the global up in bits2bytes.tcl so the set puts the value in
	the global context.  Add memwrite procs to memory.tcl git-svn-id: svn://svn.berlios.de/openocd/trunk@786
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-10  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix quoting problem when handling OpenOCD commands.  git-svn-id: svn://svn.berlios.de/openocd/trunk@784
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-10  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : very slight cleanup of flash banks handling.  git-svn-id: svn://svn.berlios.de/openocd/trunk@782
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-09  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - adding missing install entry for luminary-libftdi.cfg git-svn-id: svn://svn.berlios.de/openocd/trunk@780
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-09  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added luminary libftdi interface config git-svn-id: svn://svn.berlios.de/openocd/trunk@778
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-09  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added flash_banks low level command.  git-svn-id: svn://svn.berlios.de/openocd/trunk@776
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : tcl regression fixes.  git-svn-id: svn://svn.berlios.de/openocd/trunk@774
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-08  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - removed target_process_events as only used in
	handle_resume_command and events will be called anyway by poll git-svn-id: svn://svn.berlios.de/openocd/trunk@772
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-08  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - apply correct formatting to openocd.c - Thanks Charles Hardin git-svn-id: svn://svn.berlios.de/openocd/trunk@770
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : more tcl cleanup.  git-svn-id: svn://svn.berlios.de/openocd/trunk@768
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-07  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - command_run_line will only search once for the command, and
	execute if found git-svn-id: svn://svn.berlios.de/openocd/trunk@766
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix syntax error.  git-svn-id: svn://svn.berlios.de/openocd/trunk@764
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-06  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix duplicate log entry git-svn-id: svn://svn.berlios.de/openocd/trunk@762
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-06  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fixed build issues with win32 - fixed build warnings for last commit - set svn props for last commit git-svn-id: svn://svn.berlios.de/openocd/trunk@760
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix a few compilation problems.  git-svn-id: svn://svn.berlios.de/openocd/trunk@758
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Oopss. Forgot to list Duane Ellis <openocd@duaneellis.com> as
	the author of changes in 755.  git-svn-id: svn://svn.berlios.de/openocd/trunk@756
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-05  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added search for libdl - Thanks Charles Hardin git-svn-id: svn://svn.berlios.de/openocd/trunk@754
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-04  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added event scripts for str73x and str75x targets git-svn-id: svn://svn.berlios.de/openocd/trunk@751
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-04  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fixed line endings with commands.tcl - added svn props for newly added files git-svn-id: svn://svn.berlios.de/openocd/trunk@749
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix to peek command.  git-svn-id: svn://svn.berlios.de/openocd/trunk@747
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : typo git-svn-id: svn://svn.berlios.de/openocd/trunk@745
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added support for Tcl config scripts on the command line(use
	.tcl extension).  git-svn-id: svn://svn.berlios.de/openocd/trunk@743
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : ARM11 update. OpenOCD supports starting without being able to
	talk to the hardware.  git-svn-id: svn://svn.berlios.de/openocd/trunk@741
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-07-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Jim Tcl support added git-svn-id: svn://svn.berlios.de/openocd/trunk@739
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-06-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : wip.  git-svn-id: svn://svn.berlios.de/openocd/trunk@737
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-06-27  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - update docs for new target_script events git-svn-id: svn://svn.berlios.de/openocd/trunk@735
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-06-27  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : hooks to enable experimentation with scripting language support.
	Reduces patch size, but has no effect on OpenOCD otherwise.  git-svn-id: svn://svn.berlios.de/openocd/trunk@733
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-06-27  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Anders more target lib scripts contributed by git-svn-id: svn://svn.berlios.de/openocd/trunk@731
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-06-27  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : David Anders: fixes an issue with large block nand flash address
	where the beginning of the OOB area is always selected instead of
	the beginning of a page when needed git-svn-id: svn://svn.berlios.de/openocd/trunk@729
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-06-25  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix reset_halt issue with certain arm cores - address not set in
	embedded ice reg - Thanks Jonas Hörberg git-svn-id: svn://svn.berlios.de/openocd/trunk@727
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-06-24  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix compile errors when _DEBUG_INSTRUCTION_EXECUTION_ is defined - Thanks Simon Qian git-svn-id: svn://svn.berlios.de/openocd/trunk@725
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-06-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Pavel Chromy: - lower jtag speeds (higher divisor) was used, TDI was not changed
	on falling TCK edge as it should - reset signal was release upon any TMS transition, making it
	impossible to use reset halt - added khz() and speed_div() functions git-svn-id: svn://svn.berlios.de/openocd/trunk@716
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-06-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Spen spotted a bug in warning for missing srst_pulls_trst git-svn-id: svn://svn.berlios.de/openocd/trunk@714
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-06-16  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added target and event script for the eir-sam7se512 target git-svn-id: svn://svn.berlios.de/openocd/trunk@712
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-06-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : GDB timeout fix. If a script takes a long time and does not
	produce any output, ping between every command.  git-svn-id: svn://svn.berlios.de/openocd/trunk@710
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-06-11  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - probe incorrect for high density stm32 flash git-svn-id: svn://svn.berlios.de/openocd/trunk@708
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-06-06  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - stm32 erase will use mass_erase if all banks selected git-svn-id: svn://svn.berlios.de/openocd/trunk@706
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-06-05  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - erase bank using bank erase rather than each sector - Thanks Fredrik Hederstierna git-svn-id: svn://svn.berlios.de/openocd/trunk@704
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-06-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Pavel Chromy: fix logging syntax error + formatting & removing
	obsolete comments.  git-svn-id: svn://svn.berlios.de/openocd/trunk@702
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-06-04  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - luminary, stm32 and str7 flash driver error cleanup git-svn-id: svn://svn.berlios.de/openocd/trunk@700
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-06-03  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fredrik Hederstierna: fix leak + clean up return codes git-svn-id: svn://svn.berlios.de/openocd/trunk@698
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-29  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added checksum_memory and blank_check_memory for xscale git-svn-id: svn://svn.berlios.de/openocd/trunk@696
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-27  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - moved flash erase_check target code to target.c git-svn-id: svn://svn.berlios.de/openocd/trunk@694
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-27  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fixed typo in wp command git-svn-id: svn://svn.berlios.de/openocd/trunk@692
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-26  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added check for max. value of jtag_speed in ft2232_khz.  git-svn-id: svn://svn.berlios.de/openocd/trunk@690
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : found out why str912 reset halt failed.  git-svn-id: svn://svn.berlios.de/openocd/trunk@688
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-26  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - corrected error with stm32 page calculation git-svn-id: svn://svn.berlios.de/openocd/trunk@686
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-24  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - comment out usb_set_altinterface, because it is not working under
	Mac OS X.  And not needed for Windows. Hopefully it will not break a
	Linux build.  git-svn-id: svn://svn.berlios.de/openocd/trunk@684
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-24  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added stellaris flash mass_erase command git-svn-id: svn://svn.berlios.de/openocd/trunk@682
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-24  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - swap processing of reset handling. First srst and than trst.  git-svn-id: svn://svn.berlios.de/openocd/trunk@680
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-24  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - corrected copy/paste type and renamed jlink_usb_read_result to
	jlink_usb_read_emu_result git-svn-id: svn://svn.berlios.de/openocd/trunk@678
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-24  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - jlink jlink_execute_queue returns result - added jlink_get_version_info function - reformatted spaces to tabs git-svn-id: svn://svn.berlios.de/openocd/trunk@676
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-23  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add support for newer high density stm32 parts git-svn-id: svn://svn.berlios.de/openocd/trunk@674
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-21  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - remove error message on shutdown git-svn-id: svn://svn.berlios.de/openocd/trunk@672
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-21  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : moved srst_pulls_trst check into arm7_9_common.c. Not tested
	yet, if it is broken it should "only" print bogus warnings or not
	print a warning when it should have.  git-svn-id: svn://svn.berlios.de/openocd/trunk@670
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : reverted change in 658 and simply removed the busted warning for
	now.  git-svn-id: svn://svn.berlios.de/openocd/trunk@668
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : print out an error if srst_pulls_trst is not specified for e.g.
	at91fr40008. Could possibly show bogus false positives in log
	without any other side effects.  git-svn-id: svn://svn.berlios.de/openocd/trunk@666
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix mode output when illegal arm mode is detected. Now prints
	illegal mode for index -1.  git-svn-id: svn://svn.berlios.de/openocd/trunk@664
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-19  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : updated guidelines.  git-svn-id: svn://svn.berlios.de/openocd/trunk@662
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-16  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added smoketest result for r657 - some corrections for the reset config of at91r40008 git-svn-id: svn://svn.berlios.de/openocd/trunk@660
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-14  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added jlink support, based on Jürgen Stuber patch git-svn-id: svn://svn.berlios.de/openocd/trunk@658
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-11  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added patch from uwe hermann, thanks for the hint.  git-svn-id: svn://svn.berlios.de/openocd/trunk@656
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-10  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - corrected rounding in ft2232_khz git-svn-id: svn://svn.berlios.de/openocd/trunk@654
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-10  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - smoketest for r651 git-svn-id: svn://svn.berlios.de/openocd/trunk@652
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-09  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Michael Fischer spotted a problem in the reset routines for
	srst_pulls_trst. It is a bit of a mystery why this was only visible
	w/LPC2148.  Embedded ICE registers are now set up after SRST pulls TRST.  git-svn-id: svn://svn.berlios.de/openocd/trunk@650
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : print available memory in log_level 3 git-svn-id: svn://svn.berlios.de/openocd/trunk@648
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Edgar Grimberg plugged a leak found w/Valgrind.  git-svn-id: svn://svn.berlios.de/openocd/trunk@646
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Edgar Grimberg found tiny memory leak git-svn-id: svn://svn.berlios.de/openocd/trunk@644
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : The target library is now the authorotative source of config
	examples git-svn-id: svn://svn.berlios.de/openocd/trunk@642
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-03  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fixed xsvf_add_statemove() git-svn-id: svn://svn.berlios.de/openocd/trunk@640
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-02  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added info about libftdi support under win32 git-svn-id: svn://svn.berlios.de/openocd/trunk@638
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-01  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Tim Hudson worked on English language.  git-svn-id: svn://svn.berlios.de/openocd/trunk@636
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-05-01  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add missing svn props git-svn-id: svn://svn.berlios.de/openocd/trunk@634
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-30  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : now compiles again.  git-svn-id: svn://svn.berlios.de/openocd/trunk@632
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-30  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added new device to luminary flash driver - only use SYSRESETREQ on affected luminary parts git-svn-id: svn://svn.berlios.de/openocd/trunk@630
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-30  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Edgar's added support for printing jtag_khz git-svn-id: svn://svn.berlios.de/openocd/trunk@628
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-29  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Edgar Grimberg added a new rule for target scripts. Flash +
	verify must succeed.  git-svn-id: svn://svn.berlios.de/openocd/trunk@626
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-28  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add cortex_m3 variant luminary to fix reset issue with asserting
	SRST -

	https://lists.berlios.de/pipermail/openocd-development/2008-April/002022.html for detailsgit-svn-id: svn://svn.berlios.de/openocd/trunk@624
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-26  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - luminary flash now loader polls when finished git-svn-id: svn://svn.berlios.de/openocd/trunk@622
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-26  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - incorrect ram size for lm3s811 target script git-svn-id: svn://svn.berlios.de/openocd/trunk@620
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : wip instructions for building Cortex toolchain git-svn-id: svn://svn.berlios.de/openocd/trunk@618
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Close dangling file handle git-svn-id: svn://svn.berlios.de/openocd/trunk@616
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Edgar's new test cases.  git-svn-id: svn://svn.berlios.de/openocd/trunk@614
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-23  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Pavel Chromy's on chip flash loader git-svn-id: svn://svn.berlios.de/openocd/trunk@612
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-23  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added svn props for newly added files git-svn-id: svn://svn.berlios.de/openocd/trunk@610
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-23  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix typo in openocd.texi git-svn-id: svn://svn.berlios.de/openocd/trunk@608
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-23  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Tim Hudson: removed setting jtag_speed directly (which should
	not be done).  git-svn-id: svn://svn.berlios.de/openocd/trunk@606
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-23  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added fast option.  git-svn-id: svn://svn.berlios.de/openocd/trunk@604
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-22  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : wip on reporting bugs.  git-svn-id: svn://svn.berlios.de/openocd/trunk@602
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-21  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added stm32 stick and luminary eval boards interface configs - corrected target lm3s6965.cfg git-svn-id: svn://svn.berlios.de/openocd/trunk@600
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-20  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - set erase flag on sector git-svn-id: svn://svn.berlios.de/openocd/trunk@598
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-20  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - update docs for flash write_image command - remove info on flash auto_erase, added to removed commands section git-svn-id: svn://svn.berlios.de/openocd/trunk@596
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-19  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added test results for r592 git-svn-id: svn://svn.berlios.de/openocd/trunk@594
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-18  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Flash auto-erase is disabled by default git-svn-id: svn://svn.berlios.de/openocd/trunk@592
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-18  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Nicolas Pitre fixed regression.  git-svn-id: svn://svn.berlios.de/openocd/trunk@590
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix for gaffe in  555 that stopped JTAG chain examine + validate
	from running.  git-svn-id: svn://svn.berlios.de/openocd/trunk@588
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-16  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - correct stm32stick config script git-svn-id: svn://svn.berlios.de/openocd/trunk@586
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-16  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Edgar Grimberg added some missing scripts from the install git-svn-id: svn://svn.berlios.de/openocd/trunk@584
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-15  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - sw_bkpts fails if the target is not halted. The side effect is
	that sw_bkpts also fails if the target is an unknown state(i.e.  not
	examined yet).  - feroceon embedded ICE registers are now set up after TRST has been
	deasserted(not tested, but it was broken as is anyway).  git-svn-id: svn://svn.berlios.de/openocd/trunk@582
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-15  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : target read/write is no longer attempted for target_xxx()
	functions when the target has not been examined(fails w/error).  git-svn-id: svn://svn.berlios.de/openocd/trunk@580
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : retired fast_memory_access. It's always fast now.  git-svn-id: svn://svn.berlios.de/openocd/trunk@578
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : moved out stuff that wasn't already moved from openocd.pdf to
	the target library.  git-svn-id: svn://svn.berlios.de/openocd/trunk@576
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : TRST is asserted *before* target->type->assert_reset() is
	invoked. Removed old code.  git-svn-id: svn://svn.berlios.de/openocd/trunk@574
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-13  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : A dummy driver to test codepath w/no contact w/target.  git-svn-id: svn://svn.berlios.de/openocd/trunk@572
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-13  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : allows launching OpenOCD w/telnet+gdb server w/the target
	powered down.  git-svn-id: svn://svn.berlios.de/openocd/trunk@570
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : found two more gaffes for reset wip git-svn-id: svn://svn.berlios.de/openocd/trunk@568
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Reset wip. Just adding hooks. This is just to reduce the size of
	the actual change, no change in behaviour.  git-svn-id: svn://svn.berlios.de/openocd/trunk@566
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Wip - split target setup and target examination git-svn-id: svn://svn.berlios.de/openocd/trunk@564
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Improved XScale performance for embedded hosted OpenOCD git-svn-id: svn://svn.berlios.de/openocd/trunk@562
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-10  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : stop using variable sized arrays. That's something that belongs
	to C++ and not C.  git-svn-id: svn://svn.berlios.de/openocd/trunk@560
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-10  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - single core context used, removed debug context as thought
	unnecessary.  - DCRDR now used to access special core registers - info is
	currently omitted from the cortex_m3 TRM ARM have told me this is
	the preferred access method and the docs will be updated soon.  - now checks for User Thread Mode and Thread mode when halted.  - removed repeated function declarations from command.c - cortex_m3_prepare_reset_halt removed, updated
	cortex_m3_assert_reset to suit git-svn-id: svn://svn.berlios.de/openocd/trunk@558
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-09  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : target lib wip git-svn-id: svn://svn.berlios.de/openocd/trunk@556
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-09  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add missing svn props git-svn-id: svn://svn.berlios.de/openocd/trunk@554
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-09  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added "init" command. "init" and "reset" at end of startup script
	  is equivalent to daemon_startup(still supported).  - print warning if srst and trst change state at the same time when
	srst_and_trst is seperate - reset now performs a trst, examines and validates the jtag chain
	before targets assert reset - if startup fails to examine and validate the jtag chain, try a
	reset before trying again git-svn-id: svn://svn.berlios.de/openocd/trunk@552
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Edwin Olson found bug & tested fix for flash write_image for
	stellaris.  git-svn-id: svn://svn.berlios.de/openocd/trunk@550
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added a couple of LOG_ERROR() messages to improve logfile.  git-svn-id: svn://svn.berlios.de/openocd/trunk@548
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : The endstate now reports the endstate of the queue instead of
	reading endstate variable internal to the driver.  git-svn-id: svn://svn.berlios.de/openocd/trunk@546
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - only if "reset halt" or "reset init" are issued will the reset
	vector be set up - If communication fails during assert between assert/deassert and
	during assert, warnings are printed. The warning suggests using
	srst_only if the clock locks up as that would allow the reset vector
	to be set up before asserting reset.  git-svn-id: svn://svn.berlios.de/openocd/trunk@544
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : avoid patch trouble by isolating troublesome line...  git-svn-id: svn://svn.berlios.de/openocd/trunk@542
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - the reset mode parameter is now DEPRECATED. It is implemented as
	an optional parameter with default reset_init. This is to streamline
	things w.r.t. the target library.  git-svn-id: svn://svn.berlios.de/openocd/trunk@540
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added query of reset speed git-svn-id: svn://svn.berlios.de/openocd/trunk@538
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-03  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Work on fixing erase check. Many implementations are plain broken.
	Wrote a default flash erase check fn which uses CFI's target
	algorithm w/fallback to memory reads.  - "flash info" no longer prints erase status as it is stale.  - "flash erase_check" now prints erase status. erase check can take
	a *long* time. Work in progress - arm7/9 with seperate srst & trst now supports reset init/halt
	after a power outage. arm7/9 no longer makes any assumptions about
	state of target when reset is asserted.  - fixes for srst & trst capable arm7/9 with reset init/halt - prepare_reset_halt retired. This code needs to be inside
	assert_reset anyway - haven't been able to get stm32 write algorithm to work. Fallback
	flash write does work. Haven't found a version of openocd trunk
	where this works.  - added target_free_all_working_areas_restore() which can let be of
	restoring backups. This is needed when asserting reset as the target
	must be assumed to be an unknown state.  Added some comments to
	working areas API - str9 reset script fixes - some guidelines - fixed dangling callbacks upon reset timeout git-svn-id: svn://svn.berlios.de/openocd/trunk@536
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix flash info - now reports erased state properly git-svn-id: svn://svn.berlios.de/openocd/trunk@534
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-04-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : optional count argument to mwX git-svn-id: svn://svn.berlios.de/openocd/trunk@532
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-31  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Do not assert trst in srst_only case even if srst_pulls_trst.  git-svn-id: svn://svn.berlios.de/openocd/trunk@530
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-31  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Removed exit()'s. A reset is usually enough to work around
	these, reducing cycle times to get config scripts right.  git-svn-id: svn://svn.berlios.de/openocd/trunk@528
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Edgar Grimberg: added needed delays git-svn-id: svn://svn.berlios.de/openocd/trunk@526
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : hooks for multithreading. Disable nagle git-svn-id: svn://svn.berlios.de/openocd/trunk@524
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-22  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - gdb server was incorrectly sending null terminator on
	qXfer:features:read: packet - armv7m now sends correct gdb register packet git-svn-id: svn://svn.berlios.de/openocd/trunk@522
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-22  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - changed jtag_add_reset errors to warnings - removed extra jtag reset warnings from arm7_9 and cortex_m3 git-svn-id: svn://svn.berlios.de/openocd/trunk@520
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-21  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added new test results git-svn-id: svn://svn.berlios.de/openocd/trunk@518
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-14  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added profile command. It was added to simplify evaluation by
	testers.  git-svn-id: svn://svn.berlios.de/openocd/trunk@516
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-13  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Michael Bruck: fixed warnings git-svn-id: svn://svn.berlios.de/openocd/trunk@514
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-13  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added jtag_khz for use with target library git-svn-id: svn://svn.berlios.de/openocd/trunk@512
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-13  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : print ms in debug_level 3 logs. Seconds is not enough.  git-svn-id: svn://svn.berlios.de/openocd/trunk@510
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-13  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : marked infinite loop in code w/TODO and fixed warning.  git-svn-id: svn://svn.berlios.de/openocd/trunk@508
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-12  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : xscale now passes w/bitbang in 505 git-svn-id: svn://svn.berlios.de/openocd/trunk@506
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-12  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : This moves common code into functions so as to make it clear
	that all the jtag_add_xxx() are indeed intended to do the same
	thing.  git-svn-id: svn://svn.berlios.de/openocd/trunk@504
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-12  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : more info about latest working version git-svn-id: svn://svn.berlios.de/openocd/trunk@502
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-12  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : tinkered a bit with testing matrix.  git-svn-id: svn://svn.berlios.de/openocd/trunk@500
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : With the recent changes the TRST needs to happen for every
	reset.  git-svn-id: svn://svn.berlios.de/openocd/trunk@498
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - retired unused jtag events. The code was incorrect - hopefully clarified the difference between TRST and TMS reset.  - added DEBUG() statements w.r.t. state changes - TRST released and moving out of TAP_TLR are completely different
	events. Only TRST released has a DEBUG() statement git-svn-id: svn://svn.berlios.de/openocd/trunk@496
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : retire unused code.  git-svn-id: svn://svn.berlios.de/openocd/trunk@494
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-11  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fixed jtag_add_reset(). It no longer causes jtag_execute_queue()
	  to fail for two of it's return codes. A little bit weird, but
	  compatible with existing codebase.  - tightend up error handling. Since the jtag_xxx() is a queue that
	  is either executed as things are added(hw queue) or a software
	  queue, then errors can only be caught during jtag_execute_queue().
	  No error code is therefore returned from the queuing fn's.  git-svn-id: svn://svn.berlios.de/openocd/trunk@492
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-10  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : backed out changes from 483.  git-svn-id: svn://svn.berlios.de/openocd/trunk@490
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-10  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : more target scripts wip.  git-svn-id: svn://svn.berlios.de/openocd/trunk@488
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-10  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Pavel Chromy: the attached patch refines PRESTO support and
	makes it work with libftdi.  git-svn-id: svn://svn.berlios.de/openocd/trunk@486
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-10  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fixed a problem with big endian XScale and GDB register packets.  - hmm..... did I screw up? Was XScale and not gdb_server busted
	  here? My thinking was that OpenOCD has a canonical internal
	  representation of registers that match GDB's expectations git-svn-id: svn://svn.berlios.de/openocd/trunk@484
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-10  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Fixed various error handling when looking for memory leaks - Fixed memory leak in gdb_server.c - pushed "Error:" statements up into fn's that know something about
	what went wrong - load_image now fails if target_write_memory() fails - only issue an asynchronous halt() upon connect of GDB. Synchronous
	  halt/reset doesn't really work as what's required to initialize the
	  target might involve a special monitor sequence for the target in
	question - syntax error handling improved(fewer exit()'s) git-svn-id: svn://svn.berlios.de/openocd/trunk@482
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-10  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added stm32.cfg to install list git-svn-id: svn://svn.berlios.de/openocd/trunk@480
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-09  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add stm32 target script git-svn-id: svn://svn.berlios.de/openocd/trunk@478
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-08  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : typo.  git-svn-id: svn://svn.berlios.de/openocd/trunk@476
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Asynchronous output information from e.g. a halt is now
	displayed again.  git-svn-id: svn://svn.berlios.de/openocd/trunk@474
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-07  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - The elf loader incorrectly assumed that the program header always
	follows the ELF header. (Thanks Michael Bruck) git-svn-id: svn://svn.berlios.de/openocd/trunk@472
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Edgar Grimberg, fix arm926ejs_examine_debug_reason return value.  git-svn-id: svn://svn.berlios.de/openocd/trunk@470
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : minor corrections for target scripts.  git-svn-id: svn://svn.berlios.de/openocd/trunk@468
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Pavel Chromy, the patch fixes an issue with PRESTO & FTD2XX
	under Linux.  git-svn-id: svn://svn.berlios.de/openocd/trunk@466
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : wi-9c target scripts git-svn-id: svn://svn.berlios.de/openocd/trunk@464
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-07  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added str912/str710_program.script - added test infos from r459 git-svn-id: svn://svn.berlios.de/openocd/trunk@462
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-07  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Cosmetic fixes from Uwe Hermann git-svn-id: svn://svn.berlios.de/openocd/trunk@460
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : retired git-svn-id: svn://svn.berlios.de/openocd/trunk@458
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : tms is never referenced, confusing old code left behind
	probably.  git-svn-id: svn://svn.berlios.de/openocd/trunk@456
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Pavel Chromy: faster alloc_printf() git-svn-id: svn://svn.berlios.de/openocd/trunk@454
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Michael Bruck: - force simulate_reset_on_next_halt when target state is initially
	detected - print out method of debug entry - fix VCR activation (didn't work before) git-svn-id: svn://svn.berlios.de/openocd/trunk@452
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-06  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : make debug code w.r.t. incorrect args for bypass stricter.  git-svn-id: svn://svn.berlios.de/openocd/trunk@450
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-05  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - This speeds up dcc arm7_9 bulk write a little bit and exercises
	the jtag_add_dr_out() codepath - added a check to jtag_add_pathmove() for legal path transitions - tweaked jtag.h docs a little bit - made some jtag bypass tests _DEBUG_JTAG_IO_ git-svn-id: svn://svn.berlios.de/openocd/trunk@448
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-05  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Pavel Chromy: memory leak in at91sam7 flash driver, possible
	incorrect pointer conversion in gpnvm command handling,
	uninitialized buffer issue in handle_flash_info_command in flash.c,
	some formatting.  git-svn-id: svn://svn.berlios.de/openocd/trunk@446
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-05  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : telnet_port can now be invoked multiple times git-svn-id: svn://svn.berlios.de/openocd/trunk@444
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Fixed GDB timeout crash - regression introduced back when
	log_add/remove_callback was added.  git-svn-id: svn://svn.berlios.de/openocd/trunk@442
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-04  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Michael Bruck: fix warnings.  git-svn-id: svn://svn.berlios.de/openocd/trunk@440
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-03  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added svn prop svn:eol-style native git-svn-id: svn://svn.berlios.de/openocd/trunk@438
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-03  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added fill_malloc test. Not quite sure what to do here yet, but
	it would be good to have something...  git-svn-id: svn://svn.berlios.de/openocd/trunk@436
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-03  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : some comments from Dominic git-svn-id: svn://svn.berlios.de/openocd/trunk@434
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-02  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added svn prop svn:eol-style native git-svn-id: svn://svn.berlios.de/openocd/trunk@432
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-02  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fixed FSF address. Uwe Hermann.  git-svn-id: svn://svn.berlios.de/openocd/trunk@430
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-01  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : wrote up explaining why tests are done on committed code.  git-svn-id: svn://svn.berlios.de/openocd/trunk@428
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-01  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - contrib directory added - libdcc added as example for dcc comms with openocd target_request
	debugmsgs git-svn-id: svn://svn.berlios.de/openocd/trunk@426
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-01  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix memory corruption regression introduced in 335 git-svn-id: svn://svn.berlios.de/openocd/trunk@424
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-01  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added example for testing the JTAG speed with a FT2232 device git-svn-id: svn://svn.berlios.de/openocd/trunk@422
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-01  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - updated svn:eol-style prop to native for AT91R40008 (Thanks to
	Spen for the hint) git-svn-id: svn://svn.berlios.de/openocd/trunk@420
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-01  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - updated svn:eol-style prop to native git-svn-id: svn://svn.berlios.de/openocd/trunk@418
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-01  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : improve DCC bulk write performance by using jtag_add_shift() +
	tweaked embedded ICE communication.  git-svn-id: svn://svn.berlios.de/openocd/trunk@416
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-01  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Now uses jtag_add_shift() via embeddedice_write_reg_inner().  git-svn-id: svn://svn.berlios.de/openocd/trunk@414
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-01  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : log_remove_callback git-svn-id: svn://svn.berlios.de/openocd/trunk@412
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-01  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added str912 test example, and test result git-svn-id: svn://svn.berlios.de/openocd/trunk@410
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-01  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added test result for str710, and test description git-svn-id: svn://svn.berlios.de/openocd/trunk@408
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-03-01  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added STR710 example which I used for Eclipse debug testing git-svn-id: svn://svn.berlios.de/openocd/trunk@406
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-29  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : added an #error in case anybody tries to compile that broken
	code.  git-svn-id: svn://svn.berlios.de/openocd/trunk@404
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-29  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix bug with emulated cortex_m3 dcc channel git-svn-id: svn://svn.berlios.de/openocd/trunk@402
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-29  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Tweaked logging output.  TODO is retired(hopelessly out of date).  git-svn-id: svn://svn.berlios.de/openocd/trunk@400
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-29  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Pavel Chromy fix: the guess-rev.sh scripts to retrieve SVN
	revision returns the result including new line causing PKGBLDREV
	macro to not work git-svn-id: svn://svn.berlios.de/openocd/trunk@398
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-29  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Uwe Hermann: Small cosmetic fixes in the license header to make
	them all look the same, fix some typos, update README.  git-svn-id: svn://svn.berlios.de/openocd/trunk@396
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-29  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Uwe Hermann: mproves the manpage text a bit and adds the missing
	-s and -c options.  git-svn-id: svn://svn.berlios.de/openocd/trunk@394
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-29  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : formatting fixes from Pavel Chromy git-svn-id: svn://svn.berlios.de/openocd/trunk@392
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-29  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - image.c and fileio.c now uses logging to propagate error strings.   More precise, less code.  - removed unused code in fileio.c - Windows should now find debug_handler.bin git-svn-id: svn://svn.berlios.de/openocd/trunk@390
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-29  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : do not write single chars to log file.  git-svn-id: svn://svn.berlios.de/openocd/trunk@388
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-29  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Summary: passing of variable argument list reduced, strings sent
	to logging are now formatted just once - more efficient.  As a
	result, ugly string malloc+strcpy are not needed anymore.  git-svn-id: svn://svn.berlios.de/openocd/trunk@386
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-29  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Michael Bruck: - fix indentation of multi-level commands - make help command work with multi-level commands git-svn-id: svn://svn.berlios.de/openocd/trunk@384
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fixed newline gaffe in OUTPUT() git-svn-id: svn://svn.berlios.de/openocd/trunk@382
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Pavel Chromy spotted a leak git-svn-id: svn://svn.berlios.de/openocd/trunk@380
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : numerous fixes from  Uwe Hermann git-svn-id: svn://svn.berlios.de/openocd/trunk@378
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Pavel Chromy - cleanup error messages git-svn-id: svn://svn.berlios.de/openocd/trunk@376
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Pavel Chromy cleaned up checks for halted, error messages, etc.  git-svn-id: svn://svn.berlios.de/openocd/trunk@374
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix from Pavel Chromy this patch fixes an issue in jtag_init - shall not reset jtag to
	NULL.  This causes jtag interface (USB device) not to be closed
	properly if jtag chain validation fails.  Once the underlaying jtag interface is initialized, jtag pointer
	shall be left untouched, even in case of an error, so that proper
	cleanup can be done, see exit_handler in openocd.c git-svn-id: svn://svn.berlios.de/openocd/trunk@372
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : code to be used in upcoming minidriver work.  git-svn-id: svn://svn.berlios.de/openocd/trunk@370
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : fix copyright.  git-svn-id: svn://svn.berlios.de/openocd/trunk@368
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : lingering change for eCos flash driver git-svn-id: svn://svn.berlios.de/openocd/trunk@366
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Added TARGET_REQ_DEBUGCHAR target_request debugmsg. This   provides a better impeadance match for debug output char fn's,
	  e.g. eCos.  - Line endings are now added at the caller site of command_print*().
	  command_print() still adds a line ending - echo of commands in scripts are now available via debug_level
	  instead of forced echo - Added a USER_SAMELINE() for printing without a lineend.  git-svn-id: svn://svn.berlios.de/openocd/trunk@364
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-28  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix line-endings git-svn-id: svn://svn.berlios.de/openocd/trunk@362
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-28  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Uwe Hermann fixed some warnings.  git-svn-id: svn://svn.berlios.de/openocd/trunk@360
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-27  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix typo in ep93xx jtag driver to allow OpenOCD compilation on ARM
	(thanks to Uwe Hermann for the patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@358
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-27  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Nicolas Pitre listed some more devices.  git-svn-id: svn://svn.berlios.de/openocd/trunk@356
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-26  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - code reformat (Thanks Pavel Chromy) git-svn-id: svn://svn.berlios.de/openocd/trunk@354
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : oopss.. another jtag minidriver reset gaffe.  git-svn-id: svn://svn.berlios.de/openocd/trunk@352
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-26  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Next step in the JTAG minidriver. This should be fairly close to
	the final thing, but I'm not calling it "done" quite yet.  git-svn-id: svn://svn.berlios.de/openocd/trunk@350
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-25  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - remove build warnings git-svn-id: svn://svn.berlios.de/openocd/trunk@348
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Pavel Chromy - multiple log listeners - added OUTPUT() to replace printf - fix formatting git-svn-id: svn://svn.berlios.de/openocd/trunk@346
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Pavel Chromy style fixes.  git-svn-id: svn://svn.berlios.de/openocd/trunk@344
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Fix target library path problem w/Windows git-svn-id: svn://svn.berlios.de/openocd/trunk@342
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : committed bugfix from Michael Bruck git-svn-id: svn://svn.berlios.de/openocd/trunk@340
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - using ERROR_COMMAND_SYNTAX_ERROR to print syntax in a couple of
	places - some more flash cleanup of checking halted state - moved output handler into options.c - very slightly tweaked server.c to make it a bit more compatible
	with eCos - retired arch_state. Not quite sure how I managed to leave that out
	last time.  git-svn-id: svn://svn.berlios.de/openocd/trunk@338
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-25  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Michael Bruck spotted an omission in svn 322 git-svn-id: svn://svn.berlios.de/openocd/trunk@336
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : move options handling to separate file to better support
	embedded implementations of OpenOCD git-svn-id: svn://svn.berlios.de/openocd/trunk@334
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fixed target->type->poll() return value - added arch_state to show status of currently selected target - simplified target->type->arch_state() api.  - clean up telnet output a bit - fixed GDB output for arch_state - removed a couple of unecessary exit()'s - cleaned up error propagation a bit in a few places git-svn-id: svn://svn.berlios.de/openocd/trunk@332
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : debug_level 3 now prints seconds since start of openocd git-svn-id: svn://svn.berlios.de/openocd/trunk@330
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : sharpend JTAG docs w.r.t. hw fifo implementations and retired
	jtag_cancel_queue() which is inheritely incompatible with a hw fifo
	concept.  git-svn-id: svn://svn.berlios.de/openocd/trunk@328
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-24  oharboe <oharboe@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : cosmetic fixes to debug output + phasing out printf() in favour
	of logging system. From Pavel Chromy <chromy@asix.cz> git-svn-id: svn://svn.berlios.de/openocd/trunk@326
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-23  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix for feroceon CP15 register access (thanks to Niolas Pitre for
	this patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@324
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-23  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added a test document as a starting point - corrected URL information for the repro git-svn-id: svn://svn.berlios.de/openocd/trunk@322
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-22  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added patch to remove count and time information from log_printf
	in case of debug_level is not set to LOG_DEBUG git-svn-id: svn://svn.berlios.de/openocd/trunk@320
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-22  vpalatin <vpalatin@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix read/write size for small unaligned accesses (thanks Michael
	Bruck) git-svn-id: svn://svn.berlios.de/openocd/trunk@318
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-22  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added patch to make single-stepping more resilient (thanks to
	Nicolas Pitre for the patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@316
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-20  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix bug when using full paths to config files. Thanks Ted Roth git-svn-id: svn://svn.berlios.de/openocd/trunk@314
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-19  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add search paths via new arg -s (-search). Thanks Ted Roth - updated docs for new command git-svn-id: svn://svn.berlios.de/openocd/trunk@312
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-19  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Fixed bug in pathmove for XScale - added virtual address to working_area.  - Improved error messages in a number of places - Added ERROR_COMMAND_SYNTAX_ERROR that commands can return to have
	syntax printed - Added help for some config commands - Added verification of sw breakpoints with ERROR() message - Removed a couple of exit()'s and replaced with error message - cosmetic fix to armv4_5.c, easier to read - added polymorphic(with default) virt2phys and mmu enable query
	function to target.h - added virt2phys command that uses target->type->virt2phys() fn
	Thanks to Øyvind Harboe git-svn-id: svn://svn.berlios.de/openocd/trunk@310
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-18  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Fix problems with stuck telnet sessions. Thanks to Øyvind Harboe
	for this patch.  git-svn-id: svn://svn.berlios.de/openocd/trunk@308
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-18  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - arg list now correctly released on error. Thanks Øyvind Harboe git-svn-id: svn://svn.berlios.de/openocd/trunk@306
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-18  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - removed a raft of unecessary exit() calls. Issuing a reset will
	solve these ails.  - now uses jtag_state_pathmove() instead of making assumptions about
	implementation of jtag_statemove().  - fixed a couple of bugs in timeout handling - removed megabytes of log output when communication is failing.  - sleep is now 300ms as documented instead of 3000ms - fixed error path of bulk write - debug_handler can now be issued during normal operation + has help
	text.  Thanks Øyvind Harboe git-svn-id: svn://svn.berlios.de/openocd/trunk@304
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-18  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Added a "User:" debug level. These are messages that are intended
	for the user and are part of normal operation.  - Faster DEBUG/INFO() when they are disabled - target_read/write_buffer() now uses 16 and 32 bit access for
	single word aligned requests. Other requests are serviced as quickly
	as possible.  - *much* faster read/write GDB packets, removing timeout problems.  - GDB read/write packets w/single word aligned 32/16 bit access now
	use 32/16 bit word access.  - working area can now be changed on the fly. Provides a way to move
	working area about as MMU is enabled/disabled.  - cleaned up error messages for verify_image.  Thanks Øyvind Harboe git-svn-id: svn://svn.berlios.de/openocd/trunk@302
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-16  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - solve lots of problems with stuck GDB connections, making it
	impossible to connect to GDB, handle timeout of acknowledgement,
	etc.  - "monitor halt/resume" now works correctly - "monitor sleep 10000" no longer makes the GDB protocol lock up.
	There is an error message and the protocol recovers nicely
	afterwards.  - it's now possible to connect to a target which needs a reset
	before halt works.  - handle failed memory access more gracefully. Connection is now
	closed instead of OpenOCD quitting.  - *much* improved handling of 2 second timeout on memory read
	packets. Especially important w/mouseover evaluation of  variables
	in Eclipse.  - fixed memory leak upon failed memory packet reply.  - 'O' packets w/progress info is no longer sent out randomly.  - faster packet reply code.  - Thanks to Øyvind Harboe for this patch git-svn-id: svn://svn.berlios.de/openocd/trunk@300
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-16  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix issue with telnet prompt while gdb running git-svn-id: svn://svn.berlios.de/openocd/trunk@298
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-14  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix programming issue with lpc2101/2 git-svn-id: svn://svn.berlios.de/openocd/trunk@296
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-14  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added check for revA silicon in stm32 flash driver git-svn-id: svn://svn.berlios.de/openocd/trunk@294
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-12  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add autoprobe support to flash info command - auto_erase can now be called from script/config file git-svn-id: svn://svn.berlios.de/openocd/trunk@292
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-11  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - telnet prompt behaves correctly for new synchronous
	halt/resume/reset commands - removed unused variables in tms470.c git-svn-id: svn://svn.berlios.de/openocd/trunk@290
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-10  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - stm32 flash driver now checks for correct target git-svn-id: svn://svn.berlios.de/openocd/trunk@288
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-10  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added patch to change pathmove handling

	https://lists.berlios.de/pipermail/openocd-development/2008-January/000678.html(thanks to Øyvind for the patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@286
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-07  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added synchronous reset patch, Thanks Øyvind Harboe - added target_init_reset which calls target_process_reset after all
	drivers have been initialised git-svn-id: svn://svn.berlios.de/openocd/trunk@284
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-06  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added patch to solve problem with AT91SAM9260 (dirty register)
	(thanks to Øyvind Harboe for the patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@282
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-02-04  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Added patch to stop SEGFAULT with missing jtag config lines.
	Thanks Øyvind Harboe

	https://lists.berlios.de/pipermail/openocd-development/2008-January/000731.htmlgit-svn-id: svn://svn.berlios.de/openocd/trunk@280
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-01-27  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added autoprobe functionality - corrected blocksize handling from GDB "info mem" command (thanks
	to Øyvind and Spen for these patches) git-svn-id: svn://svn.berlios.de/openocd/trunk@278
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-01-24  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added patch to check some malloc problems.  (thanks to Øyvind
	Harboe for the patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@276
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-01-23  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added patch to fix crash in load_image on corrupt elf file or out
	of memory.  (thanks to Øyvind Harboe for the patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@274
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-01-21  bodylove <bodylove@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Added example config and startup-script for a XScale IXP42x system git-svn-id: svn://svn.berlios.de/openocd/trunk@272
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-01-21  bodylove <bodylove@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Synced code with branch git-svn-id: svn://svn.berlios.de/openocd/trunk@270
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-01-21  bodylove <bodylove@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Eleminated leading tabs/white space git-svn-id: svn://svn.berlios.de/openocd/trunk@267
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-01-21  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - updated docs for cfi command, added missing ft2232_layout names git-svn-id: svn://svn.berlios.de/openocd/trunk@261
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-01-17  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add support for cortex_m3 target_request debugmsgs - target request handler disabled by default until a target has been
	registered git-svn-id: svn://svn.berlios.de/openocd/trunk@259
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-01-17  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fixed 'make distcheck' (thanks to Theodore A. Roth for this patch git-svn-id: svn://svn.berlios.de/openocd/trunk@257
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-01-14  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - use correct SCAN_N check value (disabled by default) - add Øyvind Harboe to list of AUTHORS (thanks a lot to Øyvind for
	his hard work) git-svn-id: svn://svn.berlios.de/openocd/trunk@255
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-01-10  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fix gdb packet retransmission omission git-svn-id: svn://svn.berlios.de/openocd/trunk@253
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-01-10  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added faster gdb packet handling (thanks to oyvind harboe for the
	patch) - code reformat git-svn-id: svn://svn.berlios.de/openocd/trunk@251
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2008-01-09  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - rename flash_init and flash_erase to flash_init_drivers and
	flash_erase_address_range - stops conflicts with redboot. Thanks
	Øyvind Harboe - gdb connection not dropped if we fail to allocate memory in query
	packets git-svn-id: svn://svn.berlios.de/openocd/trunk@249
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-12-29  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add support for extended gdb packet R (restart), requires gdb to
	be started with target extended-remote git-svn-id: svn://svn.berlios.de/openocd/trunk@247
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-12-21  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - corrected working_area of LPC2129 script - added LPC2148 script - corrected size of the working_area of the LPC2294 script git-svn-id: svn://svn.berlios.de/openocd/trunk@245
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-12-20  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - removed flash write_image - binary compare function has been moved
	to verify_image command - minor code reformat and cleanup - updated docs to include new commands git-svn-id: svn://svn.berlios.de/openocd/trunk@243
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-12-18  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added patch by Øyvind Harboe to Intel Hex Start Segment Address
	Record (Type 3) - added support to parse Motorola Record Count (S5) git-svn-id: svn://svn.berlios.de/openocd/trunk@241
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-12-17  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - only some cosmetic changes, convert \r\n to unix git-svn-id: svn://svn.berlios.de/openocd/trunk@239
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-12-17  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added patch to corrected argument of image_open in
	handle_flash_write_image_command (thanks to oyvind Harboe for the
	patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@237
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-12-16  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - removed some compiler warnings - added patch to fix problem in cfi_intel_write_block. In case of   cfi_info->write_algorithm is not NULL, target_code_size was not
	  set.  (thanks to oyvind Harboe for the patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@235
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-12-16  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - initialize num_sectors and sectors in handle_flash_bank_command.
	(thanks to oyvind Harboe for this hint) git-svn-id: svn://svn.berlios.de/openocd/trunk@233
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-12-14  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added the patch CFI-BE-Fixes-Blockwrite-Support.diff (thanks to
	Carsten Schlote for the patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@231
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-12-14  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Sorry, I have forgotten to add a description for the last
	version, where I have added the clear_malloc and fill_malloc
	functionality. But the default is the original malloc.  git-svn-id: svn://svn.berlios.de/openocd/trunk@229
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-12-14  mifi <mifi@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added patch from Dominic to unlock the ATMEL flash in
	cfi_read_atmel_pri_ext - set cfi_info->write_algorithm and cfi_info->erase_check_algorithm
	  to NULL to get "flash erase_check" command working git-svn-id: svn://svn.berlios.de/openocd/trunk@227
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-12-10  bodylove <bodylove@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Stripped trailing spaces (patch preparation) git-svn-id: svn://svn.berlios.de/openocd/trunk@225
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-12-10  bodylove <bodylove@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Added PKGLIBDIR define to C options. Allows to store   native code fragments at a central place git-svn-id: svn://svn.berlios.de/openocd/trunk@223
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-12-10  bodylove <bodylove@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Changed openocd version info creation to be more useful.  - Now displays subversion revision and svn URL git-svn-id: svn://svn.berlios.de/openocd/trunk@220
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-12-05  bodylove <bodylove@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Merged rev 215 changes from /branches/xscale-ixp-be into trunk: - Obvious fixes to big endian type conversion macros - Fixed obvious typos for byte masks git-svn-id: svn://svn.berlios.de/openocd/trunk@217
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-11-23  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added support for Hitex STM32 Performance Stick - added str9 and stm32 scripts to docs git-svn-id: svn://svn.berlios.de/openocd/trunk@213
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-10-26  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - corrected str91x bank1 programming issues - str91x protect_check fixed - bank number now correctly given to str91x flash_config command git-svn-id: svn://svn.berlios.de/openocd/trunk@211
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-10-08  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - cleaned up str7, str9 and stm32 flash drivers - str7 flash driver now checks correct busy bits depending on device - str9 flash driver now disables ITCM order as per st programming
	manual - added str7 disable_jtag command - added gdb_detach command - updated arm966e cp15 support - fix crash on mingw build when enabling target_request debugmsgs git-svn-id: svn://svn.berlios.de/openocd/trunk@209
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-09-10  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Fixed display of sector sizes in flash.c - Clean up, remove unused variables and code in armv7, cortex_m3 and
	stellaris code - Move restore_context from cortex_m3 to armv7m - Updated halt handling for cortex_m3 git-svn-id: svn://svn.berlios.de/openocd/trunk@206
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-09-05  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : Patch by Michael Schwingen that  - adds support for the Altium universal JTAG cable  - adds support for "wiggler2" cable (basically a wiggler with added
	 LED, documentation coming soon) - adds LED support. The LED is turned on during data transfer -
	 works fine on Altium and wiggler2.  - adds PORT_EXIT pattern that is written to port when exiting, in
	 order to turn off power on cables that get their power from parallel
	 port data lines - move port writes (with the system-specific ifdefs) to one central
	function - increased image cache size to 2KB (might require more adaptive
	cache handling, e.g. LRU) git-svn-id: svn://svn.berlios.de/openocd/trunk@204
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-08-21  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - correctly initialize start address for XScale trace buffer decodes
	in fill-once mode git-svn-id: svn://svn.berlios.de/openocd/trunk@202
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-08-20  mlu <mlu@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Support for AT91SAM7xx512 chips git-svn-id: svn://svn.berlios.de/openocd/trunk@200
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-08-17  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - renamed "xscale dump_trace_buffer" to "xscale dump_trace" and
	added code for it git-svn-id: svn://svn.berlios.de/openocd/trunk@198
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-08-16  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fixed several bugs in flash writing code (thanks to Pavel Chromy) git-svn-id: svn://svn.berlios.de/openocd/trunk@196
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-08-14  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - reworked presto.c to allow use of either FTD2XX or libftdi
	(libftdi not functional yet). Configure option changed from
	--enable-presto to --enable-presto_ftd2xx and
	--enable-presto_libftdi - completed trace point support for use with ARM7/9 DCC - completed debug message output with support for HEX dumps (1, 2 or
	4 byte quantities) - fixed bug in delete_debug_msg_receiver (thanks to Pavel Chromy) - fixed bug in image_add_section (thanks to Pavel Chromy) - at91sam7 sector erase reworked (thanks to Pavel Chromy) - merge consecutive sections during flash image write to work around
	possible section alignment issues with LPC2000 targets git-svn-id: svn://svn.berlios.de/openocd/trunk@194
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-08-10  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - bumped version information git-svn-id: svn://svn.berlios.de/openocd/trunk@192
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-08-10  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - renamed M5960 USB JTAG to "flyswatter" - make ep93xx and at91rm9200 bitbang JTAG interfaces dependant on
	ARM host (thanks to Vincent Palatin) - various whitespace fixes - removed various warnings - add support for Debian GNU/kFreeBSD (thanks to Uwe Hermann) - fix OpenOCD compilation for various platforms (thanks to Uwe
	Hermann and Vincent Palatin) - switched order of JTAG chain examination and validation (examine
	first, then multiple validation tries even if examination failed) - added target_request subsystem to handle requests from the target
	(debug messages and tracepoints implemented, future enhancements
	might include semihosting, all ARM7/9 only for now) - added support for GDB vFlashXXX packets (thanks to Pavel Chromy) - added support for receiving data via ARM7/9 DCC - reworked flash writing. the 'flash write' command is now
	deprecated and replaced by 'flash write_binary' (old syntax and
	behaviour) and 'flash write_image' (write image files (bin, hex,
	elf, s19) to a target).  - added support for AMD/ST/SST 29F400B non-cfi flashes git-svn-id: svn://svn.berlios.de/openocd/trunk@190
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-07-31  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - cleaned up cycle counting in ETM analysis - fixed broken OpenOCD version string git-svn-id: svn://svn.berlios.de/openocd/trunk@188
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-07-31  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - calculate cycles since last executed instruction when
	cycle-accurate tracing is enabled - increase memory pseudo-image cache size to 1024 byte for improved
	trace analysis performance - added OpenOCD+trace as an ETM capture driver example
	implementation - new usbprog driver (thanks to Benedikt Sauter) git-svn-id: svn://svn.berlios.de/openocd/trunk@186
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-07-26  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - corrected stm32x_handle_options_write_command, incorrect options
	printed - added prepare_reset_halt handler for cortex_m3 git-svn-id: svn://svn.berlios.de/openocd/trunk@184
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-07-26  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - documentation fixes (thanks to Uwe Hermann) - bootstrapping changes to accomodate packaging (thanks to Uwe
	Hermann) git-svn-id: svn://svn.berlios.de/openocd/trunk@182
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-07-15  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added support for Asix Presto JTAG interface (thanks to Pavel
	Chromy and Asix for making this addition possible) - added support for usbprog (thanks to Benedikt Sauter) - make OpenOCD listen for WM_QUIT messages on windows (thanks to
	Pavel Chromy) - register at_exit handler to do necessary unregistering (thanks to
	Pavel Chromy) - added dummy ETM capture driver to allow ETM to be registered
	without a capture driver git-svn-id: svn://svn.berlios.de/openocd/trunk@180
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-06-24  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - ST STM32x cortex support added - ST STM32x flash support added - cleaned up armv7m and cortex-m3 support, removed luminary specific
	code - cortex-m3 16bit read/write added (required for STM32x flash
	programming) git-svn-id: svn://svn.berlios.de/openocd/trunk@177
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-06-16  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - str9xpec driver was using stricmp, changed to strcmp for posix
	compatibility git-svn-id: svn://svn.berlios.de/openocd/trunk@175
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-06-15  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added support for pseudo image type "mem", currently only used for
	etm analysis: "etm image <target#> <dummy base address> mem" git-svn-id: svn://svn.berlios.de/openocd/trunk@173
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-06-14  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added stellaris.[ch] missing from Cortex-M3 merge git-svn-id: svn://svn.berlios.de/openocd/trunk@171
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-06-14  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added manpage for OpenOCD (thanks to Uwe Hermann) - fixed bug in ARM926EJ-S cache handling that caused cache linefills
	to be disabled after first debug entry - added support for auto image type detection (thanks to Vincent
	Palatin) - further work on ETM trace decoding (tested with a ETB interface
	using an ETM in normal 16-bit port mode, still experimental) git-svn-id: svn://svn.berlios.de/openocd/trunk@169
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-05-30  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - reworked image handling to support multiple sections (tested with
	ihex file containing gaps) This checkin is still experimental, not
	recommended for general use git-svn-id: svn://svn.berlios.de/openocd/trunk@159
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-05-29  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add missing image handling files git-svn-id: svn://svn.berlios.de/openocd/trunk@156
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-05-10  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : -- corrected embedded ice definitions -- changed arm966e to use
	standard arm9_7 reset handling git-svn-id: svn://svn.berlios.de/openocd/trunk@146
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-04-28  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added support for Hitex comstick.  git-svn-id: svn://svn.berlios.de/openocd/trunk@144
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-04-25  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added support for error handlers to JTAG scan commands
	(jtag_[plain_][ir|dr]_scan) - catch apparently broken JTAG IR scan after ARM926EJ-S CP15
	operations - added "arm7_9 dump_etb" command git-svn-id: svn://svn.berlios.de/openocd/trunk@142
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-04-16  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - allow multiple USB vendor and product ids when searching for
	connected FT2232 based JTAG interfaces (thanks to Werner Almesberger
	for this patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@140
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-04-11  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - disabled excessive debug output in jtag.h - output all of EmbeddedICE version register in error message - update OpenOCD's idea of the current core mode, and immediately
	change core mode, on CPSR changes - added support for CFI cmdset 0002 (patch by Andrew Dyer, thanks a
	lot) - enhanced CFI cmdset 0002 support to Atmel AT49 flashes (thanks to
	Joerg Krein for providing test hardware) git-svn-id: svn://svn.berlios.de/openocd/trunk@138
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-03-29  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added "arm9tdmi vector_catch ['all'|'none'|'vec1 [vec2 [...]]']"
	command - added missing arm926ej-s cp15 patch (thanks Vincent Palatin) git-svn-id: svn://svn.berlios.de/openocd/trunk@136
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-03-26  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fixed arm926 cp15 command bug (thanks to Vincent Palatin for this
	patch) - fixed compiler warnings throughout the code (thanks to Vincent
	Palatin for this patch) - added support for accessing ETB (embedded trace buffer) registers git-svn-id: svn://svn.berlios.de/openocd/trunk@134
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-03-15  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - reworked file i/o. every fileaccess (target, flash, nand, in
	future configuration, too) should now go through the fileio
	subsystem - added support for reading IHEX files (through fileio) - load/dump_binary renamed to the more generic load/dump_image
	<file> <address> ['bin'|'ihex'] - added NAND framework (preliminary) - added support for the LPC3180 SLC and MLC NAND controllers
	(preliminary) - fix initialization for parport - gw16012 fixes/cleanups - added EmbeddedICE version 7 (preliminary, reported on two LPC23xx
	devices so far) - added 'arm7_9 etm <target#>' configuration command to enable
	access to the ETM registers git-svn-id: svn://svn.berlios.de/openocd/trunk@132
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-02-03  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - add missing parentheses around macro parameters (thanks to
	Matthias Bauch for noticing this bug and providing a fix) git-svn-id: svn://svn.berlios.de/openocd/trunk@130
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-01-26  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - disabled use of single-step bit for EmbeddedICE version 6 cores git-svn-id: svn://svn.berlios.de/openocd/trunk@128
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-01-25  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - Added support for ARM926EJ-S based cores - Added contributors to AUTHORS file - Added link to Joern Kaipf's OOCD-Link git-svn-id: svn://svn.berlios.de/openocd/trunk@126
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2007-01-18  ntfreak <ntfreak@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added support for ST flashlink cable git-svn-id: svn://svn.berlios.de/openocd/trunk@123
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2006-11-22  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - checked in missing configure.in changes for GW16012 support git-svn-id: svn://svn.berlios.de/openocd/trunk@117
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2006-11-07  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added support for the oocd-link
	(http://www.joernonline.de/dw/doku.php?id=en:projects:oocdlink) - fixed breakpoint handling (this changes the target_t interface) git-svn-id: svn://svn.berlios.de/openocd/trunk@113
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2006-10-23  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - several small fixes (thanks to Magnus Lundin and Spencer Oliver) - added support for using Luminary Micro development board
	'evb_lm3s811' as a JTAG interface (thanks to Magnus Lundin) git-svn-id: svn://svn.berlios.de/openocd/trunk@106
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2006-10-12  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - allow FT2232 devices to be opened by serial number instead of
	device description ('ft2232_serial <serial>' command) - redirect output from target event scripts (currently only reset)
	to the daemon output (INFO:) - some minor fixes and enhancements git-svn-id: svn://svn.berlios.de/openocd/trunk@103
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2006-10-03  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fixed regression in gdb_server.c (Thanks to Michael Fischer for
	finding these bugs) git-svn-id: svn://svn.berlios.de/openocd/trunk@101
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2006-09-12  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - allow writes to second flash bank on STR71x devices (cleaned up
	sector list building) - cleaned up str7x flash erase and protect code (use two accesses to
	erase sectors in both banks) git-svn-id: svn://svn.berlios.de/openocd/trunk@98
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2006-09-07  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - free working area used to store flash write buffer git-svn-id: svn://svn.berlios.de/openocd/trunk@96
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2006-09-04  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added debug output for D/I FSR and FAR (arm920t) - fixed bug that caused CPSR to be corrupted in Thumb mode git-svn-id: svn://svn.berlios.de/openocd/trunk@93
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2006-08-31  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added missing AT91RM9200 files - bumped OpenOCD version date git-svn-id: svn://svn.berlios.de/openocd/trunk@91
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2006-08-20  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - made bp command more verbose - fixed bug that could result in register corruption on arm920t
	targets git-svn-id: svn://svn.berlios.de/openocd/trunk@89
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2006-08-17  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - renamed jtag_interface_t.support_statemove to
	jtag_interface_t.support_pathmove (it is used to indicate
	jtag_add_pathmove support) - fixed small bug in str7x.c that printed an address instead of the
	target number in an error message - added support for Olimex ARM-USB-OCD. The new ft2232 layout is
	called "olimex-jtag" git-svn-id: svn://svn.berlios.de/openocd/trunk@87
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2006-08-14  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - updated configuration examples, installation instructions and
	README (including list of supported JTAG interfaces) git-svn-id: svn://svn.berlios.de/openocd/trunk@85
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2006-08-11  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added support for FreeBSD ppi (parallel port access similar to
	/dev/parport on linux) (thanks to Darius for this patch) - unified 'ftd2xx' and 'ftdi2232' into a single interface 'ft2232'.
	The library used to access the hardware is choosen during configure
	with --enable-ft2232_ftd2xx or --enable-ft2232-libftdi.  git-svn-id: svn://svn.berlios.de/openocd/trunk@83
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2006-08-06  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fixed a minor problem with the GDB server that could drop the
	first packet (non-fatal) - fixed some small memory leaks (thanks to Spencer Oliver) - verify chip- and buswidth of cfi flash configurations - added support for ARM966E based systems (tested only with ST micro
	STR9, thanks to Spencer Oliver) git-svn-id: svn://svn.berlios.de/openocd/trunk@81
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2006-07-30  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added configurable delays after reset lines get deasserted. useful
	if reset circuitry keeps lines asserted for too long.  - additional debug output when opening the parallel port - fixed counting of available arm7/9 watchpoint units - 'flash write' now displays elapsed time git-svn-id: svn://svn.berlios.de/openocd/trunk@79
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2006-06-25  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fixed bug in Thumb sw breakpoint handling (thanks to Spen for this
	patch) - fixed handling of services linked list (thanks to Spen for this
	patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@76
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2006-06-25  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - added "version" command (patch from John Hartman, thanks) - fixed bug in telnet history handling (patch from John Hartman,
	thanks) - OpenOCD version has been changed from SVN revision number to
	date/time git-svn-id: svn://svn.berlios.de/openocd/trunk@74
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2006-06-16  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - keep additional information for decoded instructions git-svn-id: svn://svn.berlios.de/openocd/trunk@69
	b42882b7-edfa-0310-969c-e2dbd0fdcd60

2006-06-05  drath <drath@b42882b7-edfa-0310-969c-e2dbd0fdcd60>

	* : - fixed some spelling errors (thanks to Andrew Dyer) git-svn-id: svn://svn.berlios.de/openocd/trunk@67
	b42882b7-edfa-0310-969c-e2dbd0fdcd60