AT_BANNER(IPsec)

dnl IPSEC_SETUP_UNDERLAY()
dnl
dnl Configure anything required in the underlay network
m4_define([IPSEC_SETUP_UNDERLAY],
      [AT_CHECK([cp ${abs_top_srcdir}/vswitchd/vswitch.ovsschema vswitch.ovsschema])
      dnl Set up the underlay switch
      AT_CHECK([ovs-ofctl add-flow br0 "actions=normal"])])

m4_define([START_PLUTO], [
  rm -f $ovs_base/$1/pluto.pid
  mkdir -p $ovs_base/$1/ipsec.d
  touch $ovs_base/$1/ipsec.conf
  touch $ovs_base/$1/secrets
  ipsec initnss --nssdir $ovs_base/$1/ipsec.d
  NS_CHECK_EXEC([$1], [ipsec pluto --config $ovs_base/$1/ipsec.conf \
        --ipsecdir $ovs_base/$1 --nssdir $ovs_base/$1/ipsec.d \
        --logfile $ovs_base/$1/pluto.log --secretsfile $ovs_base/$1/secrets \
        --rundir $ovs_base/$1], [0], [], [stderr])
])

dnl IPSEC_ADD_NODE([namespace], [device], [address], [peer address],
dnl                [custom-ipsec-conf], [extra])
dnl
dnl Creates a dummy host that acts as an IPsec endpoint. Creates host in
dnl 'namespace' and attaches a veth 'device' to 'namespace' to act as the host
dnl NIC. Assigns 'address' to 'device' and adds the other end of veth 'device' to
dnl 'br0' which is an OVS bridge in the default namespace acting as an underlay
dnl switch. Sets the default gateway of 'namespace' to 'peer address'.
dnl
dnl Starts all daemons in 'namespace' that are required for IPsec.
dnl
dnl If 'custom-ipsec-conf' is provided, then it will be used as --ipsec-conf
dnl and the ipsec.conf will be used as --root-ipsec-conf.
dnl
dnl If 'extra' is provided, passes it as an additional argument list for
dnl ovs-monitor-ipsec.
m4_define([IPSEC_ADD_NODE],
  [ADD_NAMESPACES($1)
  dnl Disable DAD. We know we wont get duplicates on this underlay network.
  NS_EXEC([$1], [sysctl -w net.ipv6.conf.all.accept_dad=0])
  NS_EXEC([$1], [sysctl -w net.ipv6.conf.default.accept_dad=0])
  ADD_VETH($2, $1, br0, $3/24)
  NS_EXEC([$1], [ip route add default via $4 dev $2])
  mkdir -p $ovs_base/$1
  touch $ovs_base/$1/.conf.db.~lock~
  NS_EXEC([$1], [ovsdb-tool create $ovs_base/$1/conf.db \
                $abs_top_srcdir/vswitchd/vswitch.ovsschema], [0], [], [stderr])

  dnl Start ovsdb-server.
  NS_EXEC([$1],[ovsdb-server $ovs_base/$1/conf.db --detach --no-chdir \
        --log-file=$ovs_base/$1/ovsdb.log --pidfile=$ovs_base/$1/ovsdb.pid \
        --remote=punix:$OVS_RUNDIR/$1/db.sock], [0], [], [stderr])
  on_exit "kill `cat $ovs_base/$1/ovsdb.pid`"
  NS_EXEC([$1], [ovs-vsctl --no-wait init])

  dnl Start ovs-vswitchd.
  NS_EXEC([$1], [ovs-vswitchd unix:${OVS_RUNDIR}/$1/db.sock --detach \
        --no-chdir --pidfile=$ovs_base/$1/vswitchd.pid \
        --unixctl=$ovs_base/$1/vswitchd.ctl \
        --log-file=$ovs_base/$1/vswitchd.log -vvconn -vofproto_dpif -vunixctl],\
        [0], [], [stderr])
  on_exit "kill_ovs_vswitchd `cat $ovs_base/$1/vswitchd.pid`"

  m4_if([$5], [], [], [
    AT_CHECK([echo "## A read-only root config. ##" > $ovs_base/$1/ipsec.conf])
    AT_CHECK([echo "include $ovs_base/$1/$5" >> $ovs_base/$1/ipsec.conf])
  ])
  AT_CHECK

  dnl Start pluto
  START_PLUTO([$1])
  on_exit 'kill $(cat $ovs_base/$1/pluto.pid)'

  dnl Start ovs-monitor-ipsec
  NS_CHECK_EXEC([$1], [ovs-monitor-ipsec unix:${OVS_RUNDIR}/$1/db.sock\
        --pidfile=${OVS_RUNDIR}/$1/ovs-monitor-ipsec.pid --ike-daemon=libreswan\
        --ipsec-conf=$ovs_base/$1/m4_if([$5], [], [ipsec.conf], [$5]) \
        m4_if([$5], [], [], [--root-ipsec-conf=$ovs_base/$1/ipsec.conf]) \
        --ipsec-d=$ovs_base/$1/ipsec.d \
        --ipsec-secrets=$ovs_base/$1/secrets \
        --log-file=$ovs_base/$1/ovs-monitor-ipsec.log \
        --ipsec-ctl=$ovs_base/$1/pluto.ctl \
        m4_if([$6], [], [], [$6]) \
        --no-restart-ike-daemon --detach ], [0], [], [stderr])
  on_exit "kill `cat $ovs_base/$1/ovs-monitor-ipsec.pid`"

  dnl Set up OVS bridge
  NS_CHECK_EXEC([$1],
    [ovs-vsctl --db unix:$ovs_base/$1/db.sock add-br br-ipsec \
               -- set-controller br-ipsec punix:$ovs_base/br-ipsec.$1.mgmt])]
)
m4_define([IPSEC_ADD_NODE_LEFT],
          [IPSEC_ADD_NODE(left, p0, $1, $2, [$3], [$4])])
m4_define([IPSEC_ADD_NODE_RIGHT],
          [IPSEC_ADD_NODE(right, p1, $1, $2, [$3], [$4])])

dnl OVS_VSCTL([namespace], [sub-command])
dnl
dnl Runs `ovs-vsctl 'sub-command'` in 'namespace'
m4_define([OVS_VSCTL],
      [[ip netns exec $1 ovs-vsctl --db unix:$ovs_base/$1/db.sock $2 ]])
m4_define([OVS_VSCTL_LEFT], [OVS_VSCTL(left, $1)])
m4_define([OVS_VSCTL_RIGHT], [OVS_VSCTL(right, $1)])

dnl IPSEC_ADD_TUNNEL([namespace], [type], [options]])
dnl
dnl Creates a tunnel of type 'type' in namespace 'namespace' using 'options'
m4_define([IPSEC_ADD_TUNNEL],
      [OVS_VSCTL([$1], [add-port br-ipsec tun -- set Interface tun type=$2 $3])
      dnl Wait for all expected connections to be loaded into Libreswan.
      dnl GRE creates 1 connection, all others create 2.
      m4_if($2, [gre],
            [OVS_WAIT_UNTIL([test `IPSEC_STATUS_LOADED($1)` -eq 1])],
            [OVS_WAIT_UNTIL([test `IPSEC_STATUS_LOADED($1)` -eq 2])])
      ])
m4_define([IPSEC_ADD_TUNNEL_LEFT], [IPSEC_ADD_TUNNEL(left, $1, $2)])
m4_define([IPSEC_ADD_TUNNEL_RIGHT], [IPSEC_ADD_TUNNEL(right, $1, $2)])

dnl CHECK_LIBRESWAN()
dnl
dnl Check if necessary Libreswan dependencies are available on the test machine
m4_define([CHECK_LIBRESWAN],
      [dnl Skip tests if system has not been set up for Libreswan
      AT_SKIP_IF([!(ipsec --version | grep Libreswan)])
      AT_SKIP_IF([test ! -x $(which certutil)])
      AT_SKIP_IF([test ! -x $(which pk12util)])
      AT_SKIP_IF([test ! -x $(which openssl)])
      dnl If '$ovs_base' is too long, the following Libreswan issue will trigger
      dnl so we check that it is not too long and skip test if it is.
      dnl https://github.com/libreswan/libreswan/issues/428
      AT_SKIP_IF([test "${#ovs_base}" -gt "90" ])])

dnl IPSEC_STATUS_LOADED([])
dnl
dnl Get number of loaded connections from ipsec status
m4_define([IPSEC_STATUS_LOADED], [
           ipsec --rundir $ovs_base/$1 status | \
           grep "Total IPsec connections" | \
           sed 's/[[0-9]]* *Total IPsec connections: loaded \([[0-9]]*\), active \([[0-9]]*\).*/\1/m'])

dnl IPSEC_STATUS_ACTIVE([])
dnl
dnl Get number of active connections from ipsec status
m4_define([IPSEC_STATUS_ACTIVE], [
           ipsec --rundir $ovs_base/$1 status | \
           grep "Total IPsec connections" | \
           sed 's/[[0-9]]* *Total IPsec connections: loaded \([[0-9]]*\), active \([[0-9]]*\).*/\2/m'])

dnl CHECK_ESP_TRAFFIC()
dnl
dnl Checks for connectivity between nodes and that the underlay traffic is ESP.
m4_define([CHECK_ESP_TRAFFIC],
      [dnl Add test interfaces for pinging
      NS_EXEC([left], [ip addr add 192.0.0.1/24 dev br-ipsec])
      NS_EXEC([left], [ip link set dev br-ipsec up])

      NS_EXEC([right], [ip addr add 192.0.0.2/24 dev br-ipsec])
      NS_EXEC([right], [ip link set dev br-ipsec up])

      dnl Capture any underlay esp packets
      OVS_DAEMONIZE([tcpdump -l -nn -i ovs-p0 esp > $ovs_base/left/tcpdump.log], [tcpdump0.pid])
      OVS_DAEMONIZE([tcpdump -l -nn -i ovs-p1 esp > $ovs_base/right/tcpdump.log], [tcpdump1.pid])

      dnl Wait for all loaded connections to be active
      OVS_WAIT_UNTIL([test `IPSEC_STATUS_LOADED(left)` -eq `IPSEC_STATUS_ACTIVE(left)`])
      OVS_WAIT_UNTIL([test `IPSEC_STATUS_LOADED(right)` -eq `IPSEC_STATUS_ACTIVE(right)`])

      dnl Ping over IPsec tunnel
      NS_CHECK_EXEC([left], [ping -q -c 3 -i 0.3 -W 2 192.0.0.2 | FORMAT_PING], [0], [dnl
3 packets transmitted, 3 received, 0% packet loss, time 0ms
])
      NS_CHECK_EXEC([right], [ping -q -c 3 -i 0.3 -W 2 192.0.0.1 | FORMAT_PING], [0], [dnl
3 packets transmitted, 3 received, 0% packet loss, time 0ms
])

      dnl Check for esp traffic
      dnl Note: Geneve tests may not work on older kernels due to CVE-2020-25645
      dnl https://bugzilla.redhat.com/show_bug.cgi?id=1883988
      AT_CHECK([cat $ovs_base/left/tcpdump.log | grep ESP], [0], [stdout], [stderr])
      AT_CHECK([cat $ovs_base/right/tcpdump.log | grep ESP], [0], [stdout], [stderr])])

AT_SETUP([IPsec -- Libreswan (ipv4, geneve, defaultroute, psk)])
AT_KEYWORDS([ipsec libreswan ipv4 geneve psk])
dnl Note: Geneve test may not work on older kernels due to CVE-2020-25645
dnl https://bugzilla.redhat.com/show_bug.cgi?id=1883988

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up dummy hosts
IPSEC_ADD_NODE_LEFT(10.1.1.1, 10.1.1.2)
IPSEC_ADD_NODE_RIGHT(10.1.1.2, 10.1.1.1)

dnl Set up IPsec tunnel on 'left' host
IPSEC_ADD_TUNNEL_LEFT([geneve],
                      [options:remote_ip=10.1.1.2 options:psk=swordfish])

dnl Set up IPsec tunnel on 'right' host
IPSEC_ADD_TUNNEL_RIGHT([geneve],
                       [options:remote_ip=10.1.1.1 options:psk=swordfish])
CHECK_ESP_TRAFFIC

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan (ipv4, geneve, localip, psk)])
AT_KEYWORDS([ipsec libreswan ipv4 geneve psk])
dnl Note: Geneve test may not work on older kernels due to CVE-2020-25645
dnl https://bugzilla.redhat.com/show_bug.cgi?id=1883988

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up dummy hosts
IPSEC_ADD_NODE_LEFT(10.1.1.1, 10.1.1.2)
IPSEC_ADD_NODE_RIGHT(10.1.1.2, 10.1.1.1)

dnl Set up IPsec tunnel on 'left' host
IPSEC_ADD_TUNNEL_LEFT([geneve],
                      [options:remote_ip=10.1.1.2 \
                      options:local_ip=10.1.1.1 options:psk=swordfish])

dnl Set up IPsec tunnel on 'right' host
IPSEC_ADD_TUNNEL_RIGHT([geneve],
                       [options:remote_ip=10.1.1.1 \
                       options:local_ip=10.1.1.2 options:psk=swordfish])
CHECK_ESP_TRAFFIC

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan (ipv4, geneve, defaultroute, self-signed)])
AT_KEYWORDS([ipsec libreswan ipv4 geneve self-signed])
dnl Note: Geneve test may not work on older kernels due to CVE-2020-25645
dnl https://bugzilla.redhat.com/show_bug.cgi?id=1883988

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up dummy hosts
IPSEC_ADD_NODE_LEFT(10.1.1.1, 10.1.1.2)
IPSEC_ADD_NODE_RIGHT(10.1.1.2, 10.1.1.1)

dnl Create and set self-signed certs
ovs-pki -b -d ${ovs_base} -l ${ovs_base}/ovs-pki.log req -u left
ovs-pki -b -d ${ovs_base} -l ${ovs_base}/ovs-pki.log req -u right
ovs-pki -b -d ${ovs_base} -l ${ovs_base}/ovs-pki.log self-sign left
ovs-pki -b -d ${ovs_base} -l ${ovs_base}/ovs-pki.log self-sign right
OVS_VSCTL_LEFT(set Open_vSwitch . \
      other_config:certificate=${ovs_base}/left-cert.pem \
      other_config:private_key=${ovs_base}/left-privkey.pem)
OVS_VSCTL_RIGHT(set Open_vSwitch . \
      other_config:certificate=${ovs_base}/right-cert.pem \
      other_config:private_key=${ovs_base}/right-privkey.pem)

dnl Set up IPsec tunnel on 'left' host
IPSEC_ADD_TUNNEL_LEFT([geneve],
                      [options:remote_ip=10.1.1.2 \
                      options:remote_cert=${ovs_base}/right-cert.pem])

dnl Set up IPsec tunnel on 'right' host
IPSEC_ADD_TUNNEL_RIGHT([geneve],
                       [options:remote_ip=10.1.1.1 \
                       options:remote_cert=${ovs_base}/left-cert.pem])
CHECK_ESP_TRAFFIC

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan (ipv4, geneve, defaultroute, ca-signed)])
AT_KEYWORDS([ipsec libreswan ipv4 geneve ca-signed])
dnl Note: Geneve test may not work on older kernels due to CVE-2020-25645
dnl https://bugzilla.redhat.com/show_bug.cgi?id=1883988

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up dummy hosts
IPSEC_ADD_NODE_LEFT(10.1.1.1, 10.1.1.2)
IPSEC_ADD_NODE_RIGHT(10.1.1.2, 10.1.1.1)

dnl Create and set ca-signed certs
ovs-pki --force -b --dir=${ovs_base} -l ${ovs_base}/ovs-pki.log init
ovs-pki -b --dir=${ovs_base} -l ${ovs_base}/ovs-pki.log req+sign -u left
ovs-pki -b --dir=${ovs_base} -l ${ovs_base}/ovs-pki.log req+sign -u right
OVS_VSCTL_LEFT(set Open_vSwitch . \
      other_config:ca_cert=${ovs_base}/switchca/cacert.pem \
      other_config:certificate=${ovs_base}/left-cert.pem \
      other_config:private_key=${ovs_base}/left-privkey.pem)
OVS_VSCTL_RIGHT(set Open_vSwitch . \
      other_config:ca_cert=${ovs_base}/switchca/cacert.pem \
      other_config:certificate=${ovs_base}/right-cert.pem \
      other_config:private_key=${ovs_base}/right-privkey.pem)

dnl Set up IPsec tunnel on 'left' host
IPSEC_ADD_TUNNEL_LEFT([geneve],
                      [options:remote_ip=10.1.1.2 options:remote_name=right])

dnl Set up IPsec tunnel on 'right' host
IPSEC_ADD_TUNNEL_RIGHT([geneve],
                       [options:remote_ip=10.1.1.1 options:remote_name=left])
CHECK_ESP_TRAFFIC

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan (ipv4, gre, defaultroute, psk)])
AT_KEYWORDS([ipsec libreswan ipv4 gre psk])

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up dummy hosts
IPSEC_ADD_NODE_LEFT(10.1.1.1, 10.1.1.2)
IPSEC_ADD_NODE_RIGHT(10.1.1.2, 10.1.1.1)

dnl Set up IPsec tunnel on 'left' host
IPSEC_ADD_TUNNEL_LEFT([gre],
                      [options:remote_ip=10.1.1.2 options:psk=swordfish])

dnl Set up IPsec tunnel on 'right' host
IPSEC_ADD_TUNNEL_RIGHT([gre],
                       [options:remote_ip=10.1.1.1 options:psk=swordfish])
CHECK_ESP_TRAFFIC

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan (ipv4, vxlan, defaultroute, psk)])
AT_KEYWORDS([ipsec libreswan ipv4, vxlan psk])

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up dummy hosts
IPSEC_ADD_NODE_LEFT(10.1.1.1, 10.1.1.2)
IPSEC_ADD_NODE_RIGHT(10.1.1.2, 10.1.1.1)

dnl Set up IPsec tunnel on 'left' host
IPSEC_ADD_TUNNEL_LEFT([vxlan],
                      [options:remote_ip=10.1.1.2 options:psk=swordfish])

dnl Set up IPsec tunnel on 'right' host
IPSEC_ADD_TUNNEL_RIGHT([vxlan],
                       [options:remote_ip=10.1.1.1 options:psk=swordfish])
CHECK_ESP_TRAFFIC

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan (ipv6, vxlan, defaultroute, psk)])
AT_KEYWORDS([ipsec libreswan ipv6 vxlan psk])

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up dummy hosts
IPSEC_ADD_NODE_LEFT(fd01::101, fd01::102)
IPSEC_ADD_NODE_RIGHT(fd01::102, fd01::101)

dnl Set up IPsec tunnel on 'left' host
IPSEC_ADD_TUNNEL_LEFT([vxlan],
                      [options:remote_ip=fd01::102 options:psk=swordfish])

dnl Set up IPsec tunnel on 'right' host
IPSEC_ADD_TUNNEL_RIGHT([vxlan],
                       [options:remote_ip=fd01::101 options:psk=swordfish])
CHECK_ESP_TRAFFIC

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan (ipv6, vxlan, localip, psk)])
AT_KEYWORDS([ipsec libreswan ipv6 vxlan psk])

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up dummy hosts
IPSEC_ADD_NODE_LEFT(fd01::101, fd01::102)
IPSEC_ADD_NODE_RIGHT(fd01::102, fd01::101)

dnl Set up IPsec tunnel on 'left' host
IPSEC_ADD_TUNNEL_LEFT([vxlan],
                      [options:remote_ip=fd01::102 \
                      options:local_ip=fd01::101 options:psk=swordfish])

dnl Set up IPsec tunnel on 'right' host
IPSEC_ADD_TUNNEL_RIGHT([vxlan],
                       [options:remote_ip=fd01::101 \
                       options:local_ip=fd01::102 options:psk=swordfish])
CHECK_ESP_TRAFFIC

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan (ipv6, geneve, defaultroute, psk)])
AT_KEYWORDS([ipsec libreswan ipv6 geneve psk])
dnl Note: Geneve test may not work on older kernels due to CVE-2020-25645
dnl https://bugzilla.redhat.com/show_bug.cgi?id=1883988

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up dummy hosts
IPSEC_ADD_NODE_LEFT(fd01::101, fd01::102)
IPSEC_ADD_NODE_RIGHT(fd01::102, fd01::101)

dnl Set up IPsec tunnel on 'left' host
IPSEC_ADD_TUNNEL_LEFT([geneve],
                      [options:remote_ip=fd01::102 options:psk=swordfish])

dnl Set up IPsec tunnel on 'right' host
IPSEC_ADD_TUNNEL_RIGHT([geneve],
                       [options:remote_ip=fd01::101 options:psk=swordfish])
CHECK_ESP_TRAFFIC

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan (ipv4, geneve, custom conf)])
AT_KEYWORDS([ipsec libreswan ipv4 geneve psk custom conf])
dnl Note: Geneve test may not work on older kernels due to CVE-2020-25645
dnl https://bugzilla.redhat.com/show_bug.cgi?id=1883988

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up hosts.
IPSEC_ADD_NODE_LEFT(10.1.1.1, 10.1.1.2, [custom.conf])
IPSEC_ADD_NODE_RIGHT(10.1.1.2, 10.1.1.1, [custom.conf])

dnl Set up IPsec tunnel on 'left' host.
IPSEC_ADD_TUNNEL_LEFT([geneve],
                      [options:remote_ip=10.1.1.2 options:psk=swordfish])

dnl Set up IPsec tunnel on 'right' host.
IPSEC_ADD_TUNNEL_RIGHT([geneve],
                       [options:remote_ip=10.1.1.1 options:psk=swordfish])
CHECK_ESP_TRAFFIC

dnl Check that custom.conf doesn't include default section, but has
dnl ike and esp configuration per connection.
AT_CHECK([grep -q "conn %default" $ovs_base/left/custom.conf], [1])
AT_CHECK([grep -c -E "(ike|ikev2|esp)=" $ovs_base/left/custom.conf], [0], [6
])
AT_CHECK([grep -q "conn %default" $ovs_base/right/custom.conf], [1])
AT_CHECK([grep -c -E "(ike|ikev2|esp)=" $ovs_base/right/custom.conf], [0], [6
])

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan (ipv4, geneve, default crypto)])
AT_KEYWORDS([ipsec libreswan ipv4 geneve psk default crypto])
dnl Note: Geneve test may not work on older kernels due to CVE-2020-25645
dnl https://bugzilla.redhat.com/show_bug.cgi?id=1883988

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up hosts.
IPSEC_ADD_NODE_LEFT(10.1.1.1, 10.1.1.2, [], [--use-default-crypto])
IPSEC_ADD_NODE_RIGHT(10.1.1.2, 10.1.1.1, [], [--use-default-crypto])

dnl Set up IPsec tunnel on 'left' host.
IPSEC_ADD_TUNNEL_LEFT([geneve],
                      [options:remote_ip=10.1.1.2 options:psk=swordfish])

dnl Set up IPsec tunnel on 'right' host.
IPSEC_ADD_TUNNEL_RIGHT([geneve],
                       [options:remote_ip=10.1.1.1 options:psk=swordfish])
CHECK_ESP_TRAFFIC

dnl Check that ipsec.conf doesn't include ike or esp configuration.
AT_CHECK([grep -q "conn %default" $ovs_base/left/ipsec.conf])
AT_CHECK([grep -q -E "(ike|ikev2|esp)=" $ovs_base/left/ipsec.conf], [1])
AT_CHECK([grep -q "conn %default" $ovs_base/right/ipsec.conf])
AT_CHECK([grep -q -E "(ike|ikev2|esp)=" $ovs_base/right/ipsec.conf], [1])

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan (ipv4, geneve, custom conf, default crypto)])
AT_KEYWORDS([ipsec libreswan ipv4 geneve psk custom conf default crypto])
dnl Note: Geneve test may not work on older kernels due to CVE-2020-25645
dnl https://bugzilla.redhat.com/show_bug.cgi?id=1883988

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

dnl Set up hosts.
IPSEC_ADD_NODE_LEFT(10.1.1.1, 10.1.1.2, [custom.conf], [--use-default-crypto])
IPSEC_ADD_NODE_RIGHT(10.1.1.2, 10.1.1.1, [custom.conf], [--use-default-crypto])

dnl Set up IPsec tunnel on 'left' host.
IPSEC_ADD_TUNNEL_LEFT([geneve],
                      [options:remote_ip=10.1.1.2 options:psk=swordfish])

dnl Set up IPsec tunnel on 'right' host.
IPSEC_ADD_TUNNEL_RIGHT([geneve],
                       [options:remote_ip=10.1.1.1 options:psk=swordfish])
CHECK_ESP_TRAFFIC

dnl Check that custom.conf doesn't include default section, and also doesn't
dnl have ike or esp configuration.
AT_CHECK([grep -q "conn %default" $ovs_base/left/custom.conf], [1])
AT_CHECK([grep -q -E "(ike|ikev2|esp)=" $ovs_base/left/custom.conf], [1])
AT_CHECK([grep -q "conn %default" $ovs_base/right/custom.conf], [1])
AT_CHECK([grep -q -E "(ike|ikev2|esp)=" $ovs_base/right/custom.conf], [1])

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP

AT_SETUP([IPsec -- Libreswan NxN geneve tunnels + reconciliation])
AT_KEYWORDS([ipsec libreswan scale reconciliation])
dnl Note: Geneve test may not work on older kernels due to CVE-2020-25645
dnl https://bugzilla.redhat.com/show_bug.cgi?id=1883988

CHECK_LIBRESWAN()
OVS_TRAFFIC_VSWITCHD_START()
IPSEC_SETUP_UNDERLAY()

m4_define([NODES], [20])

dnl Set up fake hosts.
m4_for([id], [1], NODES, [1], [
  IPSEC_ADD_NODE([node-id], [p-id], 10.1.1.id, 10.1.1.254)
  AT_CHECK([ovs-pki -b -d ${ovs_base} -l ${ovs_base}/ovs-pki.log \
                req -u node-id], [0], [stdout])
  AT_CHECK([ovs-pki -b -d ${ovs_base} -l ${ovs_base}/ovs-pki.log \
                self-sign node-id], [0], [stdout])
  AT_CHECK(OVS_VSCTL([node-id], set Open_vSwitch . \
      other_config:certificate=${ovs_base}/node-id-cert.pem \
      other_config:private_key=${ovs_base}/node-id-privkey.pem \
      -- set bridge br-ipsec other-config:hwaddr=f2:ff:00:00:00:id),
      [0], [ignore], [ignore])
  on_exit "ipsec --rundir $ovs_base/node-id status > $ovs_base/node-id/status"
])

dnl Create a full mesh of tunnels.
m4_for([LEFT], [1], NODES, [1], [
  m4_for([RIGHT], [1], NODES, [1], [
    if test LEFT -ne RIGHT; then
      AT_CHECK(OVS_VSCTL(node-LEFT, add-port br-ipsec tun-RIGHT \
        -- set Interface tun-RIGHT type=geneve options:remote_ip=10.1.1.RIGHT \
           options:remote_cert=${ovs_base}/node-RIGHT-cert.pem),
        [0], [ignore], [ignore])
    fi
])])

dnl These are not necessary, but nice to have in the test log in
dnl order to spot pluto failures during the test.
on_exit "grep -E 'Timed out|outdated|half-loaded|defunct' \
            $ovs_base/node-*/ovs-monitor-ipsec.log"
on_exit "grep -E 'ABORT|ERROR' $ovs_base/node-*/pluto.log"

m4_define([WAIT_FOR_LOADED_CONNS], [
  m4_for([id], [1], NODES, [1], [
    echo "================== node-id ========================="
    iterations=0
    loaded=0
    active=0
    dnl Using a custom loop instead of OVS_WAIT_UNTIL, because it may take
    dnl much longer than a default timeout.  The default retransmit timeout
    dnl for pluto is 60 seconds.  Also, we need to make sure pluto didn't
    dnl crash in the process and revive it if it did, unfortunately.
    while true; do
      date
      AT_CHECK([ipsec --rundir $ovs_base/node-id status 2>&1 \
                    | grep -E "whack|Total"], [ignore], [stdout])
      if grep -E 'is Pluto running?|refused' stdout; then
        echo "node-id: Pluto died, restarting..."
        START_PLUTO([node-id])
      else
        loaded=$(IPSEC_STATUS_LOADED(node-id))
        m4_if([$1], [active],
              [active=$(IPSEC_STATUS_ACTIVE(node-id))], [active=$loaded])
      fi
      if test "$loaded" -ne "$(( (NODES - 1) * 2 ))" -o \
              "$loaded" -ne "$active"; then
        sleep 3
      else
        break
      fi
      let iterations=$iterations+1
      AT_CHECK([test $iterations -lt 100])
    done
  ])
])

dnl Wait for all the connections to be loaded to pluto.  Not waiting for
dnl them to become active, because if pluto is down on one of the nodes,
dnl some connections may not become active until we revive it.  Some
dnl connections may also never become active due to bugs in libreswan 4.x.
WAIT_FOR_LOADED_CONNS()

AT_CHECK([ipsec auto --help], [ignore], [ignore], [stderr])
auto=auto
if test -s stderr; then
    auto=
fi

dnl Remove connections for two tunnels.  One fully and one partially.
AT_CHECK([ipsec $auto --ctlsocket $ovs_base/node-1/pluto.ctl \
                      --config $ovs_base/node-1/ipsec.conf \
                      --delete tun-5-out-1], [0], [stdout])
AT_CHECK([ipsec $auto --ctlsocket $ovs_base/node-1/pluto.ctl \
                      --config $ovs_base/node-1/ipsec.conf \
                      --delete tun-2-in-1], [0], [stdout])
AT_CHECK([ipsec $auto --ctlsocket $ovs_base/node-1/pluto.ctl \
                      --config $ovs_base/node-1/ipsec.conf \
                      --delete tun-2-out-1], [0], [stdout])

dnl Wait for the monitor to notice the missing connections.
OVS_WAIT_UNTIL([grep -q 'tun-2.*need to reconcile' \
                    $ovs_base/node-1/ovs-monitor-ipsec.log])

dnl Wait for all the connections to be loaded back.
WAIT_FOR_LOADED_CONNS()

dnl Next section will check connectivity between all the nodes.
dnl Different versions of Libreswan 4.x have issues where connections
dnl are not being correctly established or never become active in a
dnl way that can not be mitigated from ovs-monitor-ipsec or the test.
dnl So, only checking connectivity for Libreswan 3- or 5+.
dnl Skipping in the middle of the test, so test can still fail while
dnl testing with Libreswan 4, if the first half fails.
AT_SKIP_IF([ipsec --version 2>&1 | grep -q 'Libreswan 4\.'])

dnl Turn off IPv6 and add static ARP entries for all namespaces to avoid
dnl any broadcast / multicast traffic that would otherwise be multiplied
dnl by each node creating a traffic storm.  Add specific OpenFlow rules
dnl to forward traffic to exact destinations without any MAC learning.
m4_for([LEFT], [1], NODES, [1], [
  NS_CHECK_EXEC([node-LEFT], [sysctl -w net.ipv6.conf.all.disable_ipv6=1],
                [0], [ignore])
  AT_CHECK([ovs-ofctl del-flows unix:$ovs_base/br-ipsec.node-LEFT.mgmt])
  AT_CHECK([ovs-ofctl add-flow unix:$ovs_base/br-ipsec.node-LEFT.mgmt \
                  "dl_dst=f2:ff:00:00:00:LEFT actions=LOCAL"])
  m4_for([RIGHT], [1], NODES, [1], [
    if test LEFT -ne RIGHT; then
      NS_CHECK_EXEC([node-LEFT],
        [ip neigh add 192.0.0.RIGHT lladdr f2:ff:00:00:00:RIGHT dev br-ipsec])
      AT_CHECK([ovs-ofctl add-flow unix:$ovs_base/br-ipsec.node-LEFT.mgmt \
                  "dl_dst=f2:ff:00:00:00:RIGHT actions=tun-RIGHT"])
    fi
  ])
])

dnl Bring up and add IP addresses for br-ipsec interface.
m4_for([id], [1], NODES, [1], [
  echo "================== node-id ========================="
  NS_CHECK_EXEC([node-id], [ip addr add 192.0.0.id/24 dev br-ipsec])
  NS_CHECK_EXEC([node-id], [ip link set dev br-ipsec up])
])

dnl Wait for all the connections to be loaded and active.  In case one of
dnl the pluto processes crashed some of the connections may never become
dnl active.  But we did run this loop with a pluto reviving logic twice
dnl already, so the chances for pluto to be down here are much lower.
WAIT_FOR_LOADED_CONNS([active])

dnl Check the full mesh ping.
m4_for([LEFT], [1], NODES, [1], [
  m4_for([RIGHT], [1], NODES, [1], [
    if test LEFT -ne RIGHT; then
      echo "====== ping: node-LEFT --> node-RIGHT =========="
      dnl Ping without checking in case connection will recover after the
      dnl first packet.
      NS_CHECK_EXEC([node-LEFT],
                    [ping -q -c 1 -W 2 192.0.0.RIGHT | FORMAT_PING],
                    [ignore], [stdout])
      dnl Now check.  If this one fails, there is no actual connectivity.
      NS_CHECK_EXEC([node-LEFT],
                    [ping -q -c 3 -i 0.1 -W 2 192.0.0.RIGHT | FORMAT_PING],
                    [0], [dnl
3 packets transmitted, 3 received, 0% packet loss, time 0ms
])
    fi
])])

OVS_TRAFFIC_VSWITCHD_STOP()
AT_CLEANUP