1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
|
<Product Revision="2" xmlns="https://github.com/OpenZWave/open-zwave">
<!-- Polycontrol: Polylock -->
<!-- COMMAND_CLASS_BASIC does not respond to requests -->
<CommandClass id="32">
<Compatibility>
<SetAsReport>true</SetAsReport>
</Compatibility>
</CommandClass>
<CommandClass id="112">
<Value genre="config" index="0" instance="1" label="Invert Lock Direction" max="1" min="0" type="byte" value="0">
<Help>0=The motor goes clockwise when unlatched; 1= The motor goes counterclockwise when unlatched</Help>
</Value>
<Value genre="config" index="1" instance="1" label="Run time Lock" max="15" min="1" type="byte" value="5">
<Help>Motor/relay run time LOCK in sec 1-15</Help>
</Value>
<Value genre="config" index="2" instance="1" label="Run time UnLock" max="15" min="1" type="byte" value="5">
<Help>Motor/relay run time UNLOCK in sec 1-15</Help>
</Value>
<Value genre="config" index="3" instance="1" label="Motor speed" max="15" min="0" type="byte" value="9">
<Help>Value 0-15/0=fastest 15=slowest</Help>
</Value>
<Value genre="config" index="4" instance="1" label="Step Motor drive mode" size="1" type="list" value="0">
<Help>How the motor will turn according to torque and speed</Help>
<Item label="(Step motor) Wave drive mode.(Less torque, min. power usage, full rotation speed.)" value="0"/>
<Item label="(Step motor) Full drive mode. (Medium torque, max. power usage, full rotation speed.)" value="1"/>
<Item label="(Step motor) HalfFstep drive mode. (Max. torque, max. power usage, half rotation speed.)" value="2"/>
<Item label="(Relay) Puts DC on connector pin 1 & 2 for the duration of parameter #2 or #3. The polarity of pin 1 & 2 are reversed with respect to open / close command. A close command would set p1+ and p2F, open is p1F and p2+" value="3"/>
<Item label="(Relay) Lock open sets p1+, p2F, p3z, p4z for parameter #3 seconds. Lock close sets p1z, p2z, p3+, p4F." value="4"/>
</Value>
</CommandClass>
<CommandClass id="133">
<Associations num_groups="1">
<Group index="1" label="Group 1" max_associations="1" write_only="true"/>
</Associations>
</CommandClass>
</Product>
|
