1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232
|
/*
* Purpose: Measuring the hardware level latencies.
* Copyright (C) 4Front Technologies, 2002-2004. Released under GPLv2/CDDL.
*
* Description:
* This simple program was once used to measure internal latencies of some
* sound cards. It was written in great hurry so don't use it as a program
* template. Error checking is completely inadequate.
*
* This program requires that the output of the sound card is connected
* to the line in of the same card.
*
* The program will play a short spike and then measure how many "silent "
* samples there are in the input before the spike is seen. You can
* get the delay in seconds by dividing this sample count by the
* sample rate.
*
* This is the total delay value that includes both the output and input
* delays. There is no way to estimate how large part of it is caused by
* input or output.
*/
#include <stdio.h>
#include <unistd.h>
#include <stdlib.h>
#include <string.h>
#include <sys/time.h>
#include <sys/types.h>
#include <fcntl.h>
#include <soundcard.h>
#ifdef _AIX
#include <sys/select.h>
#endif
int frag_size = 0;
static int pos = 0;
static int
open_device (char *name, int mode)
{
int tmp, fd;
int frag = 0x0020000b; /* 32 fragments of 2^11=2048 bytes */
if ((fd = open (name, mode, 0)) == -1)
{
perror (name);
exit (-1);
}
/*
* WARNING!!!!!!!!!!!
*
* The following code makes ioctl calls without verifying that the
* result was OK. Don't do this at home.
*/
if (ioctl (fd, SNDCTL_DSP_SETFRAGMENT, &frag) == -1)
perror ("SNDCTL_DSP_SETFRAGMENT");
tmp = 1;
if (ioctl (fd, SNDCTL_DSP_CHANNELS, &tmp) == -1)
perror ("SNDCTL_DSP_CHANNELS");
tmp = AFMT_S16_NE;
if (ioctl (fd, SNDCTL_DSP_SETFMT, &tmp) == -1)
perror ("SNDCTL_DSP_SETFMT");
tmp = 48000;
if (ioctl (fd, SNDCTL_DSP_SPEED, &tmp) == -1) /* And #channels & #bits if required */
perror ("SNDCTL_DSP_SPEED");
if (ioctl (fd, SNDCTL_DSP_GETBLKSIZE, &frag_size) == -1)
perror ("SNDCTL_DSP_GETBLKSIZE");
tmp = 0;
if (ioctl (fd, SNDCTL_DSP_SETTRIGGER, &tmp) == -1)
perror ("SNDCTL_DSP_SETTRIGGER");
/*
* WARNING!!!!!!!!!!!
*
* The above code makes ioctl calls without verifying that the
* result was OK. Don't do this at home.
*/
return fd;
}
static void
gen_spike (short *buf)
{
int i, p;
for (i = 0; i < 30; i++)
{
p = (i / 4) % 3;
buf[i] = (p - 1) * 8 * 1024;
}
}
static void
check_buf (short *buf, int l)
{
int i;
for (i = 0; i < l; i++)
{
int v;
v = buf[i];
if (v < 0)
v = -v;
if (v > 4096)
printf ("%d = %d\n", pos, v);
pos++;
}
}
int
main (int argc, char *argv[])
{
int fd_in, fd_out;
char *name_in = "/dev/dsp", *name_out = NULL;
int tmp;
int have_data = 0;
char buf[128 * 1024];
int n, l;
fd_set reads, writes;
if (argc > 1)
name_in = argv[1];
if (argc > 2)
name_out = argv[2];
if (name_out != NULL)
{
fd_in = open_device (name_in, O_RDONLY);
fd_out = open_device (name_out, O_WRONLY);
}
else
{
fd_in = fd_out == open_device (name_in, O_RDWR);
}
memset (buf, 0, frag_size);
gen_spike ((short *) buf);
write (fd_out, buf, frag_size);
if (fd_out != fd_in)
{
tmp = PCM_ENABLE_INPUT;
ioctl (fd_in, SNDCTL_DSP_SETTRIGGER, &tmp);
tmp = PCM_ENABLE_OUTPUT;
ioctl (fd_out, SNDCTL_DSP_SETTRIGGER, &tmp);
}
else
{
tmp = PCM_ENABLE_INPUT | PCM_ENABLE_OUTPUT;
ioctl (fd_in, SNDCTL_DSP_SETTRIGGER, &tmp);
}
while (1)
{
struct timeval time;
FD_ZERO (&reads);
FD_ZERO (&writes);
FD_SET (fd_out, &writes);
FD_SET (fd_in, &reads);
time.tv_sec = 0;
time.tv_usec = 100000;
if ((l = select (fd_out + 1, &reads, &writes, NULL, &time)) == -1)
{
perror ("select");
exit (-1);
}
if (l == 0)
printf ("Timeout ");
if (FD_ISSET (fd_in, &reads))
{
struct audio_buf_info info;
if (ioctl (fd_in, SNDCTL_DSP_GETISPACE, &info) == -1)
{
perror ("select");
exit (-1);
}
n = info.bytes;
if (n <= 0)
{
printf ("Error: NREAD=%d\n", n);
exit (-1);
}
l = read (fd_in, buf, n);
if (l > 0)
have_data = 1;
else
perror ("read");
check_buf ((short *) buf, l / 2);
}
if (FD_ISSET (fd_out, &writes))
{
int i;
struct audio_buf_info info;
if (ioctl (fd_out, SNDCTL_DSP_GETOSPACE, &info) == -1)
{
perror ("select");
exit (-1);
}
n = info.bytes;
/* printf("Write %d", l); */
l = n;
memset (buf, 0, l);
if (write (fd_out, buf, l) == l);
have_data = 0;
}
}
exit (0);
}
|