Template: partman-partitioning/progress_resizing
Type: text
# :sl2:
_Description: Resizing partition...

Template: partman-partitioning/new_state
Type: text
# :sl1:
_Description: Computing the new state of the partition table...

Template: partman-partitioning/impossible_resize
Type: error
# :sl2:
_Description: The resize operation is impossible
 Because of an unknown reason it is impossible to resize this partition.
 .
 Check /var/log/syslog or see virtual console 4 for the details.

Template: partman-partitioning/confirm_resize
Type: boolean
# :sl2:
_Description: Write previous changes to disk and continue?
 Before you can select a new partition size, any previous changes have to be
 written to disk.
 .
 You cannot undo this operation.
 .
 Please note that the resize operation may take a long time.

Template: partman-partitioning/new_size
Type: string
Default: some number
# :sl2:
_Description: New partition size:
 The minimum size for this partition is ${MINSIZE} (or ${PERCENT}) and its
 maximum size is ${MAXSIZE}.
 .
 Hint: "max" can be used as a shortcut to specify the maximum size, or
 enter a percentage (e.g. "20%") to use that percentage of the maximum size.
 You can specify partition sizes in decimal units (like MB or GB) as well as
 in binary units (like GiB or TiB).

Template: partman-partitioning/bad_new_size
Type: error
# :sl2:
_Description: The size entered is invalid
 The size you entered was not understood.
 Please enter a positive integer size followed by an optional unit of measure
 (e.g. "200 GB"). The default unit of measure is the megabyte.

Template: partman-partitioning/big_new_size
Type: error
# :sl2:
_Description: The size entered is too large
 The size you entered is larger than the maximum size of the partition.
 Please enter a smaller size to continue.

Template: partman-partitioning/small_new_size
Type: error
# :sl2:
_Description: The size entered is too small
 The size you entered is smaller than the minimum size of the partition.
 Please enter a larger size to continue.

Template: partman-partitioning/new_size_commit_failed
Type: error
# :sl2:
_Description: Resize operation failure
 An error occurred while writing the changes to the storage devices.
 .
 The resize operation has been aborted.

Template: partman-partitioning/new_partition_size
Type: string
Default: some number
# :sl2:
_Description: New partition size:
 The maximum size for this partition is ${MAXSIZE}.
 .
 Hint: "max" can be used as a shortcut to specify the maximum size, or
 enter a percentage (e.g. "20%") to use that percentage of the maximum size.
 You can specify partition sizes in decimal units (like MB or GB) as well as
 in binary units (like GiB or TiB).

Template: partman-partitioning/bad_new_partition_size
Type: error
# :sl2:
_Description: Invalid size

Template: partman-partitioning/new_partition_place
Type: select
# :sl1:
__Choices: Beginning, End
# :sl1:
_Description: Location for the new partition:
 Please choose whether you want the new partition to be created at the
 beginning or at the end of the available space.

Template: partman-partitioning/new_partition_type
Type: select
# :sl1:
__Choices: Primary, Logical
# :sl1:
_Description: Type for the new partition:

Template: partman-partitioning/set_flags
Type: multiselect
Choices: ${CHOICES}
# :sl2:
_Description: Flags for the new partition:

Template: partman-partitioning/set_name
Type: string
# :sl2:
_Description: Partition name:

Template: partman-partitioning/unknown_label
Type: boolean
Default: true
# :sl2:
_Description: Continue with partitioning?
 This partitioner doesn't have information about the default type of
 the partition tables on your architecture.  Please send an e-mail
 message to debian-boot@lists.debian.org with information.
 .
 Please note that if the type of the partition table is unsupported by
 libparted, then this partitioner will not work properly.

Template: partman-partitioning/unsupported_label
Type: boolean
Default: false
# :sl2:
_Description: Continue with partitioning?
 This partitioner is based on the library libparted which doesn't have
 support for the partition tables used on your architecture.  It is
 strongly recommended that you exit this partitioner.
 .
 If you can, please help to add support for your partition table type
 to libparted.

Template: partman-partitioning/default_label
Type: string
Description: for internal use; can be preseeded
 You may preseed this template to override the partitioner's
 platform-specific default choice of disk label.  For example, on x86
 architectures it may be useful to set this to "gpt" to cause new partition
 tables to be created using GPT.

Template: partman-partitioning/choose_label
Type: select
Choices: ${CHOICES}
# :sl2:
_Description: Partition table type:
 Select the type of partition table to use.

Template: partman-partitioning/confirm_new_label
Type: boolean
Default: false
# :sl2:
_Description: Create new empty partition table on this device?
 You have selected an entire device to partition. If you proceed with
 creating a new partition table on the device, then all current partitions
 will be removed.
 .
 Note that you will be able to undo this operation later if you wish.

Template: partman-partitioning/confirm_write_new_label
Type: boolean
Default: false
# :sl2:
_Description: Write a new empty partition table?
 Because of limitations in the current implementation of the Sun
 partition tables in libparted, the newly created partition table has
 to be written to the disk immediately.
 .
 You will NOT be able to undo this operation later and all existing
 data on the disk will be irreversibly removed.
 .
 Confirm whether you actually want to create a new partition table and
 write it to disk.

Template: partman-partitioning/bootable_logical
Type: boolean
Default: false
# :sl2:
_Description: Are you sure you want a bootable logical partition?
 You are trying to set the bootable flag on a logical partition. The
 bootable flag is generally only useful on primary partitions, so setting it
 on logical partitions is normally discouraged. Some BIOS versions are known
 to fail to boot if there is no bootable primary partition.
 .
 However, if you are sure that your BIOS does not have this problem, or if
 you are using a custom boot manager that pays attention to bootable logical
 partitions, then setting this flag may make sense.

Template: partman-partitioning/text/set_flags
Type: text
# :sl2:
_Description: Set the partition flags

Template: partman-partitioning/text/set_name
Type: text
# :sl2:
_Description: Name:

Template: partman-partitioning/text/bootable
Type: text
# :sl2:
_Description: Bootable flag:

Template: partman-partitioning/text/on
Type: text
# :sl2:
_Description: on

Template: partman-partitioning/text/off
Type: text
# :sl2:
_Description: off

Template: partman-partitioning/text/resize
Type: text
# :sl2:
_Description: Resize the partition (currently ${SIZE})

Template: partman-partitioning/text/delete
Type: text
# :sl2:
_Description: Delete the partition

Template: partman-partitioning/text/new
Type: text
# :sl2:
_Description: Create a new partition

Template: partman-partitioning/text/label
Type: text
# :sl2:
_Description: Create a new empty partition table on this device

Template: partman/method_long/biosgrub
Type: text
# :sl5:
# Setting to reserve a small part of the disk for use by BIOS-based bootloaders
# such as GRUB.
_Description: Reserved BIOS boot area

Template: partman/method_short/biosgrub
Type: text
# :sl5:
# short variant of 'Reserved BIOS boot area'
# Up to 10 character positions
_Description: biosgrub