<?xml version="1.0" encoding="UTF-8"?>
  <sect1 id="Geometry_Editors">
     <sect1info>
        <abstract>
        <para>These functions create modified geometries by changing type, structure or vertices.
        </para>
        </abstract>
    </sect1info>

	  <title>Geometry Editors</title>

		<refentry id="ST_AddPoint">
		  <refnamediv>
			<refname>ST_AddPoint</refname>
			<refpurpose>Add a point to a LineString.</refpurpose>
		  </refnamediv>
		  <refsynopsisdiv>
			<funcsynopsis>
			  <funcprototype>
				<funcdef>geometry <function>ST_AddPoint</function></funcdef>
				<paramdef><type>geometry</type> <parameter>linestring</parameter></paramdef>
				<paramdef><type>geometry</type> <parameter>point</parameter></paramdef>
			  </funcprototype>
			 </funcsynopsis>
			 <funcsynopsis>
			  <funcprototype>
				<funcdef>geometry <function>ST_AddPoint</function></funcdef>
				<paramdef><type>geometry</type> <parameter>linestring</parameter></paramdef>
				<paramdef><type>geometry</type> <parameter>point</parameter></paramdef>
				<paramdef><type>integer</type> <parameter>position = -1</parameter></paramdef>
			  </funcprototype>
			 </funcsynopsis>
		  </refsynopsisdiv>

		  <refsection>
			<title>Description</title>

			<para>Adds a point to a LineString before the index <parameter>position</parameter>
				(using a 0-based index).
                If the <parameter>position</parameter> parameter is omitted or is -1
				the point is appended to the end of the LineString.</para>
			<para>Availability: 1.1.0</para>
			<para>&Z_support;</para>
		  </refsection>

		  <refsection>
			<title>Examples</title>

            <para>Add a point to the end of a 3D line</para>
<programlisting>
SELECT ST_AsEWKT(ST_AddPoint('LINESTRING(0 0 1, 1 1 1)', ST_MakePoint(1, 2, 3)));

    st_asewkt
    ----------
    LINESTRING(0 0 1,1 1 1,1 2 3)
</programlisting>

<para>Guarantee all lines in a table are closed
by adding the start point of each line to the end of the line
only for those that are not closed.
</para>
<programlisting>
UPDATE sometable
SET geom = ST_AddPoint(geom, ST_StartPoint(geom))
FROM sometable
WHERE ST_IsClosed(geom) = false;
</programlisting>

		  </refsection>
		  <refsection>
			<title>See Also</title>
			<para><xref linkend="ST_RemovePoint"/>, <xref linkend="ST_SetPoint" /></para>
		  </refsection>
	</refentry>


	<refentry id="ST_CollectionExtract">
		<refnamediv>
			<refname>ST_CollectionExtract</refname>

			<refpurpose>
Given a geometry collection, returns a multi-geometry containing only elements of a specified type.
			</refpurpose>
		</refnamediv>

		<refsynopsisdiv>
			<funcsynopsis>
			  <funcprototype>
				<funcdef>geometry <function>ST_CollectionExtract</function></funcdef>
				<paramdef><type>geometry </type> <parameter>collection</parameter></paramdef>
			  </funcprototype>
			</funcsynopsis>
            <funcsynopsis>
              <funcprototype>
                <funcdef>geometry <function>ST_CollectionExtract</function></funcdef>
                <paramdef><type>geometry </type> <parameter>collection</parameter></paramdef>
                <paramdef><type>integer </type> <parameter>type</parameter></paramdef>
              </funcprototype>
            </funcsynopsis>
		</refsynopsisdiv>

		<refsection>
			<title>Description</title>

			<para>Given a geometry collection, returns a homogeneous multi-geometry.</para>

            <para>If the <parameter>type</parameter> is not specified, returns a multi-geometry containing only geometries of the highest dimension.
            So polygons are preferred over lines, which are preferred over points.
            </para>
            <para>If the <parameter>type</parameter> is specified, returns a multi-geometry containing only that type.
            If there are no sub-geometries of the right type, an EMPTY geometry is returned.
            Only points, lines and polygons are supported. The type numbers are:</para>
            <itemizedlist>
            <listitem><para>1 == POINT</para></listitem>
            <listitem><para>2 == LINESTRING</para></listitem>
            <listitem><para>3 == POLYGON</para></listitem>
            </itemizedlist>

            <para>For atomic geometry inputs, the geometry is retured unchanged
            if the input type matches the requested type.
            Otherwise, the result is an EMPTY geometry of the specified type.
            If required, these can be converted to multi-geometries using <xref linkend="ST_Multi" />.
            </para>

			<warning><para>MultiPolygon results are not checked for validity.
            If the polygon components are adjacent or overlapping the result will be invalid.
            (For example, this can occur when applying this function to an <xref linkend="ST_Split" /> result.)
            This situation can be checked with <xref linkend="ST_IsValid" /> and repaired with <xref linkend="ST_MakeValid" />.
            </para></warning>

			<para>Availability: 1.5.0</para>

			<note><para>
            Prior to 1.5.3 this function returned atomic inputs unchanged, no matter type.
            In 1.5.3 non-matching single geometries returned a NULL result.
            In 2.0.0 non-matching single geometries return an EMPTY result of the requested type.
			</para></note>

		</refsection>

		<refsection>
			<title>Examples</title>
<para>Extract highest-dimension type:</para>
<programlisting>
SELECT ST_AsText(ST_CollectionExtract(
        'GEOMETRYCOLLECTION( POINT(0 0), LINESTRING(1 1, 2 2) )'));
    st_astext
    ---------------
    MULTILINESTRING((1 1, 2 2))
</programlisting>

<para>Extract points (type 1 == POINT):</para>
<programlisting>
SELECT ST_AsText(ST_CollectionExtract(
        'GEOMETRYCOLLECTION(GEOMETRYCOLLECTION(POINT(0 0)))',
        1 ));
    st_astext
    ---------------
    MULTIPOINT((0 0))
</programlisting>

<para>Extract lines (type 2 == LINESTRING):</para>
<programlisting>
SELECT ST_AsText(ST_CollectionExtract(
        'GEOMETRYCOLLECTION(GEOMETRYCOLLECTION(LINESTRING(0 0, 1 1)),LINESTRING(2 2, 3 3))',
        2 ));
    st_astext
    ---------------
    MULTILINESTRING((0 0, 1 1), (2 2, 3 3))
</programlisting>
		</refsection>
		<refsection>
			<title>See Also</title>
			<para><xref linkend="ST_CollectionHomogenize" />, <xref linkend="ST_Multi" />,
                <xref linkend="ST_IsValid" />, <xref linkend="ST_MakeValid" />
            </para>
		</refsection>
	</refentry>

    <refentry id="ST_CollectionHomogenize">
        <refnamediv>
            <refname>ST_CollectionHomogenize</refname>

            <refpurpose>
Returns the simplest representation of a geometry collection.
            </refpurpose>
        </refnamediv>

        <refsynopsisdiv>
            <funcsynopsis>
                <funcprototype>
                <funcdef>geometry <function>ST_CollectionHomogenize</function></funcdef>
                <paramdef><type>geometry </type> <parameter>collection</parameter></paramdef>
                </funcprototype>
            </funcsynopsis>
        </refsynopsisdiv>

        <refsection>
            <title>Description</title>

            <para>
            Given a geometry collection, returns the "simplest" representation of the contents.
            </para>
            <itemizedlist>
            <listitem><para>Homogeneous (uniform) collections are returned as the appropriate multi-geometry.</para></listitem>
            <listitem><para>Heterogeneous (mixed) collections are flattened into a single GeometryCollection.</para></listitem>
            <listitem><para>Collections containing a single atomic element are returned as that element.</para></listitem>
            <listitem><para>Atomic geometries are returned unchanged.
                If required, these can be converted to a multi-geometry using <xref linkend="ST_Multi" />.</para></listitem>
            </itemizedlist>

            <warning><para>This function does not ensure that the result is valid.
            In particular, a collection containing adjacent or overlapping Polygons
            will create an invalid MultiPolygon.
            This situation can be checked with <xref linkend="ST_IsValid" /> and repaired with <xref linkend="ST_MakeValid" />.
            </para></warning>

            <para>Availability: 2.0.0</para>

        </refsection>

        <refsection>
            <title>Examples</title>
<para>Single-element collection converted to an atomic geometry</para>
<programlisting>
  SELECT ST_AsText(ST_CollectionHomogenize('GEOMETRYCOLLECTION(POINT(0 0))'));

	st_astext
	------------
	POINT(0 0)
</programlisting>

<para>Nested single-element collection converted to an atomic geometry:</para>
<programlisting>
SELECT ST_AsText(ST_CollectionHomogenize('GEOMETRYCOLLECTION(MULTIPOINT((0 0)))'));

	st_astext
	------------
	POINT(0 0)
</programlisting>

<para>Collection converted to a multi-geometry:</para>
<programlisting>
SELECT ST_AsText(ST_CollectionHomogenize('GEOMETRYCOLLECTION(POINT(0 0),POINT(1 1))'));

	st_astext
	---------------------
	MULTIPOINT((0 0),(1 1))
</programlisting>

<para>Nested heterogeneous collection flattened to a GeometryCollection:</para>
<programlisting>
SELECT ST_AsText(ST_CollectionHomogenize('GEOMETRYCOLLECTION(POINT(0 0), GEOMETRYCOLLECTION( LINESTRING(1 1, 2 2)))'));

	st_astext
	---------------------
	GEOMETRYCOLLECTION(POINT(0 0),LINESTRING(1 1,2 2))
</programlisting>

<para>Collection of Polygons converted to an (invalid) MultiPolygon:</para>
<programlisting>
SELECT ST_AsText(ST_CollectionHomogenize('GEOMETRYCOLLECTION (POLYGON ((10 50, 50 50, 50 10, 10 10, 10 50)), POLYGON ((90 50, 90 10, 50 10, 50 50, 90 50)))'));

	st_astext
	---------------------
	MULTIPOLYGON(((10 50,50 50,50 10,10 10,10 50)),((90 50,90 10,50 10,50 50,90 50)))
</programlisting>
        </refsection>
        <refsection>
            <title>See Also</title>
            <para><xref linkend="ST_CollectionExtract" />, <xref linkend="ST_Multi" />,
            <xref linkend="ST_IsValid" />, <xref linkend="ST_MakeValid" /></para>
        </refsection>
    </refentry>

    <refentry id="ST_CurveToLine">
      <refnamediv>
        <refname>ST_CurveToLine</refname>

        <refpurpose>Converts a geometry containing curves to a linear geometry.</refpurpose>
      </refnamediv>

      <refsynopsisdiv>
        <funcsynopsis>
          <funcprototype>
            <funcdef>geometry <function>ST_CurveToLine</function></funcdef>
            <paramdef><type>geometry</type> <parameter>curveGeom</parameter></paramdef>
            <paramdef><type>float</type> <parameter>tolerance</parameter></paramdef>
            <paramdef choice="opt"><type>integer</type> <parameter>tolerance_type</parameter></paramdef>
            <paramdef choice="opt"><type>integer</type> <parameter>flags</parameter></paramdef>
          </funcprototype>
        </funcsynopsis>
      </refsynopsisdiv>

      <refsection>
        <title>Description</title>

        <para>Converts a CIRCULAR STRING to regular LINESTRING or CURVEPOLYGON to POLYGON or MULTISURFACE to MULTIPOLYGON. Useful for outputting to devices that can't support CIRCULARSTRING geometry types</para>

        <para>Converts a given geometry to a linear geometry.
        Each curved geometry or segment is converted into a linear
approximation using the given `tolerance` and options (32 segments per
quadrant and no options by default).</para>

    <para>
The 'tolerance_type' argument determines interpretation of the
`tolerance` argument. It can take the following values:
      <itemizedlist>
        <listitem>
          <para>0 (default): Tolerance is max segments per quadrant.</para>
        </listitem>
        <listitem>
          <para>1: Tolerance is max-deviation of line from curve, in source units.</para>
        </listitem>
        <listitem>
          <para>2: Tolerance is max-angle, in radians, between generating radii.</para>
        </listitem>
      </itemizedlist>
    </para>

    <para>
The 'flags' argument is a bitfield. 0 by default.
Supported bits are:
      <itemizedlist>
        <listitem>
          <para>1: Symmetric (orientation idependent) output.</para>
        </listitem>
        <listitem>
          <para>2: Retain angle, avoids reducing angles (segment lengths) when producing symmetric output. Has no effect when Symmetric flag is off.</para>
        </listitem>
      </itemizedlist>
    </para>

        <para>Availability: 1.3.0</para>
    <para>Enhanced: 2.4.0 added support for max-deviation and max-angle tolerance, and for symmetric output.</para>
    <para>Enhanced: 3.0.0 implemented a minimum number of segments per linearized arc to prevent topological collapse.</para>

        <para>&sfs_compliant;</para>
        <para>&sqlmm_compliant; SQL-MM 3: 7.1.7</para>
        <para>&Z_support;</para>
        <para>&curve_support;</para>
      </refsection>


      <refsection>
        <title>Examples</title>

        <programlisting>SELECT ST_AsText(ST_CurveToLine(ST_GeomFromText('CIRCULARSTRING(220268 150415,220227 150505,220227 150406)')));

--Result --
 LINESTRING(220268 150415,220269.95064912 150416.539364228,220271.823415575 150418.17258804,220273.613787707 150419.895736857,
 220275.317452352 150421.704659462,220276.930305234 150423.594998003,220278.448460847 150425.562198489,
 220279.868261823 150427.60152176,220281.186287736 150429.708054909,220282.399363347 150431.876723113,
 220283.50456625 150434.10230186,220284.499233914 150436.379429536,220285.380970099 150438.702620341,220286.147650624 150441.066277505,
 220286.797428488 150443.464706771,220287.328738321 150445.892130112,220287.740300149 150448.342699654,
 220288.031122486 150450.810511759,220288.200504713 150453.289621251,220288.248038775 150455.77405574,
 220288.173610157 150458.257830005,220287.977398166 150460.734960415,220287.659875492 150463.199479347,
 220287.221807076 150465.64544956,220286.664248262 150468.066978495,220285.988542259 150470.458232479,220285.196316903 150472.81345077,
 220284.289480732 150475.126959442,220283.270218395 150477.39318505,220282.140985384 150479.606668057,
 220280.90450212 150481.762075989,220279.5637474 150483.85421628,220278.12195122 150485.87804878,
 220276.582586992 150487.828697901,220274.949363179 150489.701464356,220273.226214362 150491.491836488,
 220271.417291757 150493.195501133,220269.526953216 150494.808354014,220267.559752731 150496.326509628,
 220265.520429459 150497.746310603,220263.41389631 150499.064336517,220261.245228106 150500.277412127,
 220259.019649359 150501.38261503,220256.742521683 150502.377282695,220254.419330878 150503.259018879,
 220252.055673714 150504.025699404,220249.657244448 150504.675477269,220247.229821107 150505.206787101,
 220244.779251566 150505.61834893,220242.311439461 150505.909171266,220239.832329968 150506.078553494,
 220237.347895479 150506.126087555,220234.864121215 150506.051658938,220232.386990804 150505.855446946,
 220229.922471872 150505.537924272,220227.47650166 150505.099855856,220225.054972724 150504.542297043,
 220222.663718741 150503.86659104,220220.308500449 150503.074365683,
 220217.994991777 150502.167529512,220215.72876617 150501.148267175,
 220213.515283163 150500.019034164,220211.35987523 150498.7825509,
 220209.267734939 150497.441796181,220207.243902439 150496,
 220205.293253319 150494.460635772,220203.420486864 150492.82741196,220201.630114732 150491.104263143,
 220199.926450087 150489.295340538,220198.313597205 150487.405001997,220196.795441592 150485.437801511,
 220195.375640616 150483.39847824,220194.057614703 150481.291945091,220192.844539092 150479.123276887,220191.739336189 150476.89769814,
 220190.744668525 150474.620570464,220189.86293234 150472.297379659,220189.096251815 150469.933722495,
 220188.446473951 150467.535293229,220187.915164118 150465.107869888,220187.50360229 150462.657300346,
 220187.212779953 150460.189488241,220187.043397726 150457.710378749,220186.995863664 150455.22594426,
 220187.070292282 150452.742169995,220187.266504273 150450.265039585,220187.584026947 150447.800520653,
 220188.022095363 150445.35455044,220188.579654177 150442.933021505,220189.25536018 150440.541767521,
 220190.047585536 150438.18654923,220190.954421707 150435.873040558,220191.973684044 150433.60681495,
 220193.102917055 150431.393331943,220194.339400319 150429.237924011,220195.680155039 150427.14578372,220197.12195122 150425.12195122,
 220198.661315447 150423.171302099,220200.29453926 150421.298535644,220202.017688077 150419.508163512,220203.826610682 150417.804498867,
 220205.716949223 150416.191645986,220207.684149708 150414.673490372,220209.72347298 150413.253689397,220211.830006129 150411.935663483,
 220213.998674333 150410.722587873,220216.22425308 150409.61738497,220218.501380756 150408.622717305,220220.824571561 150407.740981121,
 220223.188228725 150406.974300596,220225.586657991 150406.324522731,220227 150406)

--3d example
SELECT ST_AsEWKT(ST_CurveToLine(ST_GeomFromEWKT('CIRCULARSTRING(220268 150415 1,220227 150505 2,220227 150406 3)')));
Output
------
 LINESTRING(220268 150415 1,220269.95064912 150416.539364228 1.0181172856673,
 220271.823415575 150418.17258804 1.03623457133459,220273.613787707 150419.895736857 1.05435185700189,....AD INFINITUM ....
    220225.586657991 150406.324522731 1.32611114201132,220227 150406 3)

--use only 2 segments to approximate quarter circle
SELECT ST_AsText(ST_CurveToLine(ST_GeomFromText('CIRCULARSTRING(220268 150415,220227 150505,220227 150406)'),2));
st_astext
------------------------------
 LINESTRING(220268 150415,220287.740300149 150448.342699654,220278.12195122 150485.87804878,
 220244.779251566 150505.61834893,220207.243902439 150496,220187.50360229 150462.657300346,
 220197.12195122 150425.12195122,220227 150406)

-- Ensure approximated line is no further than 20 units away from
-- original curve, and make the result direction-neutral
SELECT ST_AsText(ST_CurveToLine(
 'CIRCULARSTRING(0 0,100 -100,200 0)'::geometry,
    20, -- Tolerance
    1, -- Above is max distance between curve and line
    1  -- Symmetric flag
));
st_astext
-------------------------------------------------------------------------------------------
 LINESTRING(0 0,50 -86.6025403784438,150 -86.6025403784439,200 -1.1331077795296e-13,200 0)


        </programlisting>
      </refsection>

      <!-- Optionally add a "See Also" section -->
      <refsection>
        <title>See Also</title>

        <para><xref linkend="ST_LineToCurve" /></para>
      </refsection>
    </refentry>

    <refentry id="ST_Scroll">
      <refnamediv>
        <refname>ST_Scroll</refname>
        <refpurpose>Change start point of a closed LineString.</refpurpose>
      </refnamediv>
      <refsynopsisdiv>
        <funcsynopsis>
          <funcprototype>
            <funcdef>geometry <function>ST_Scroll</function></funcdef>
            <paramdef><type>geometry</type> <parameter>linestring</parameter></paramdef>
            <paramdef><type>geometry</type> <parameter>point</parameter></paramdef>
          </funcprototype>
         </funcsynopsis>
      </refsynopsisdiv>

      <refsection>
        <title>Description</title>

        <para>
Changes the start/end point of a closed LineString to
the given vertex <parameter>point</parameter>.
        </para>
        <para>Availability: 3.2.0</para>
        <para>&Z_support;</para>
        <para>&M_support;</para>
      </refsection>

      <refsection>
        <title>Examples</title>

        <para>Make e closed line start at its 3rd vertex</para>
<programlisting>
SELECT ST_AsEWKT(ST_Scroll('SRID=4326;LINESTRING(0 0 0 1, 10 0 2 0, 5 5 4 2,0 0 0 1)', 'POINT(5 5 4 2)'));

st_asewkt
----------
SRID=4326;LINESTRING(5 5 4 2,0 0 0 1,10 0 2 0,5 5 4 2)
</programlisting>

      </refsection>
      <refsection>
        <title>See Also</title>
        <para><xref linkend="ST_Normalize" /></para>
      </refsection>
</refentry>

    <refentry id="ST_FlipCoordinates">
      <refnamediv>
        <refname>ST_FlipCoordinates</refname>
        <refpurpose>Returns a version of a geometry with X and Y axis flipped. </refpurpose>
      </refnamediv>

      <refsynopsisdiv>
        <funcsynopsis>
          <funcprototype>
            <funcdef>geometry <function>ST_FlipCoordinates</function></funcdef>
            <paramdef><type>geometry</type> <parameter>geom</parameter></paramdef>
          </funcprototype>
        </funcsynopsis>
      </refsynopsisdiv>

      <refsection>
        <title>Description</title>
        <para>Returns a version of the given geometry with X and Y axis flipped.
        Useful for fixing geometries which contain coordinates expressed as latitude/longitude (Y,X).</para>
        <para>Availability: 2.0.0</para>
        <para>&curve_support;</para>
        <para>&Z_support;</para>
        <para>&M_support;</para>
        <para>&P_support;</para>
        <para>&T_support;</para>
      </refsection>

      <refsection>
        <title>Example</title>
        <programlisting><![CDATA[
SELECT ST_AsEWKT(ST_FlipCoordinates(GeomFromEWKT('POINT(1 2)')));
 st_asewkt
------------
POINT(2 1)
         ]]></programlisting>
      </refsection>

      <!-- Optionally add a "See Also" section -->
      <refsection>
        <title>See Also</title>
        <para> <xref linkend="ST_SwapOrdinates" /> </para>
      </refsection>

    </refentry>

	<refentry id="ST_Force2D">
	  <refnamediv>
		<refname>ST_Force2D</refname>

		<refpurpose>Force the geometries into a "2-dimensional mode".</refpurpose>
	  </refnamediv>

	  <refsynopsisdiv>
		<funcsynopsis>
		  <funcprototype>
			<funcdef>geometry <function>ST_Force2D</function></funcdef>
			<paramdef><type>geometry </type> <parameter>geomA</parameter></paramdef>
		  </funcprototype>
		</funcsynopsis>
	  </refsynopsisdiv>

	  <refsection>
		<title>Description</title>

		<para>Forces the geometries into a "2-dimensional mode" so that
		all output representations will only have the X and Y coordinates.
		This is useful for force OGC-compliant output (since OGC only
		specifies 2-D geometries).</para>

		<para>Enhanced: 2.0.0 support for Polyhedral surfaces was introduced.</para>
		<para>Changed: 2.1.0. Up to 2.0.x this was called ST_Force_2D.</para>
		<para>&curve_support;</para>
		<para>&P_support;</para>
		<para>&Z_support;</para>
	  </refsection>


	  <refsection>
		<title>Examples</title>

		<programlisting>SELECT ST_AsEWKT(ST_Force2D(ST_GeomFromEWKT('CIRCULARSTRING(1 1 2, 2 3 2, 4 5 2, 6 7 2, 5 6 2)')));
		st_asewkt
-------------------------------------
CIRCULARSTRING(1 1,2 3,4 5,6 7,5 6)

SELECT  ST_AsEWKT(ST_Force2D('POLYGON((0 0 2,0 5 2,5 0 2,0 0 2),(1 1 2,3 1 2,1 3 2,1 1 2))'));

				  st_asewkt
----------------------------------------------
 POLYGON((0 0,0 5,5 0,0 0),(1 1,3 1,1 3,1 1))

		</programlisting>
	  </refsection>

	  <!-- Optionally add a "See Also" section -->
	  <refsection>
		<title>See Also</title>

		<para><xref linkend="ST_Force_3D"/></para>
	  </refsection>
	</refentry>

	<refentry id="ST_Force_3D">
	  <refnamediv>
		<refname>ST_Force3D</refname>

		<refpurpose>Force the geometries into XYZ mode.  This is an alias for ST_Force3DZ.</refpurpose>
	  </refnamediv>

	  <refsynopsisdiv>
		<funcsynopsis>
		  <funcprototype>
			<funcdef>geometry <function>ST_Force3D</function></funcdef>
			<paramdef><type>geometry </type> <parameter>geomA</parameter></paramdef>
			<paramdef><type>float </type> <parameter>Zvalue = 0.0</parameter></paramdef>
		  </funcprototype>
		</funcsynopsis>
	  </refsynopsisdiv>

	  <refsection>
		<title>Description</title>

        <para>Forces the geometries into XYZ mode. This is an alias for ST_Force3DZ. If a geometry has no Z component, then a <parameter>Zvalue</parameter> Z coordinate is tacked on.</para>

		<para>Enhanced: 2.0.0 support for Polyhedral surfaces was introduced.</para>
		<para>Changed: 2.1.0. Up to 2.0.x this was called ST_Force_3D.</para>
		<para>Changed: 3.1.0. Added support for supplying a non-zero Z value.</para>
		<para>&P_support;</para>
		<para>&curve_support;</para>
		<para>&Z_support;</para>
	  </refsection>


	  <refsection>
		<title>Examples</title>

		<programlisting>
		--Nothing happens to an already 3D geometry
		SELECT ST_AsEWKT(ST_Force3D(ST_GeomFromEWKT('CIRCULARSTRING(1 1 2, 2 3 2, 4 5 2, 6 7 2, 5 6 2)')));
				   st_asewkt
-----------------------------------------------
 CIRCULARSTRING(1 1 2,2 3 2,4 5 2,6 7 2,5 6 2)


SELECT  ST_AsEWKT(ST_Force3D('POLYGON((0 0,0 5,5 0,0 0),(1 1,3 1,1 3,1 1))'));

						 st_asewkt
--------------------------------------------------------------
 POLYGON((0 0 0,0 5 0,5 0 0,0 0 0),(1 1 0,3 1 0,1 3 0,1 1 0))
		</programlisting>
	  </refsection>

	  <!-- Optionally add a "See Also" section -->
	  <refsection>
		<title>See Also</title>

		<para><xref linkend="ST_AsEWKT"/>, <xref linkend="ST_Force2D"/>, <xref linkend="ST_Force_3DM"/>, <xref linkend="ST_Force_3DZ"/></para>
	  </refsection>
	</refentry>

	<refentry id="ST_Force_3DZ">
	  <refnamediv>
		<refname>ST_Force3DZ</refname>

		<refpurpose>Force the geometries into XYZ mode.</refpurpose>
	  </refnamediv>

	  <refsynopsisdiv>
		<funcsynopsis>
		  <funcprototype>
			<funcdef>geometry <function>ST_Force3DZ</function></funcdef>
			<paramdef><type>geometry </type> <parameter>geomA</parameter></paramdef>
			<paramdef><type>float </type> <parameter>Zvalue = 0.0</parameter></paramdef>
		  </funcprototype>
		</funcsynopsis>
	  </refsynopsisdiv>

	  <refsection>
		<title>Description</title>

		<para>Forces the geometries into XYZ mode. If a geometry has no Z component, then a <parameter>Zvalue</parameter> Z coordinate is tacked on.</para>

		<para>Enhanced: 2.0.0 support for Polyhedral surfaces was introduced.</para>
		<para>Changed: 2.1.0. Up to 2.0.x this was called ST_Force_3DZ.</para>
		<para>Changed: 3.1.0. Added support for supplying a non-zero Z value.</para>
		<para>&P_support;</para>
		<para>&Z_support;</para>
		<para>&curve_support;</para>
	  </refsection>


	  <refsection>
		<title>Examples</title>

		<programlisting>
--Nothing happens to an already 3D geometry
SELECT ST_AsEWKT(ST_Force3DZ(ST_GeomFromEWKT('CIRCULARSTRING(1 1 2, 2 3 2, 4 5 2, 6 7 2, 5 6 2)')));
				   st_asewkt
-----------------------------------------------
 CIRCULARSTRING(1 1 2,2 3 2,4 5 2,6 7 2,5 6 2)


SELECT  ST_AsEWKT(ST_Force3DZ('POLYGON((0 0,0 5,5 0,0 0),(1 1,3 1,1 3,1 1))'));

						 st_asewkt
--------------------------------------------------------------
 POLYGON((0 0 0,0 5 0,5 0 0,0 0 0),(1 1 0,3 1 0,1 3 0,1 1 0))
		</programlisting>
	  </refsection>

	  <!-- Optionally add a "See Also" section -->
	  <refsection>
		<title>See Also</title>

		<para><xref linkend="ST_AsEWKT"/>, <xref linkend="ST_Force2D"/>, <xref linkend="ST_Force_3DM"/>, <xref linkend="ST_Force_3D"/></para>
	  </refsection>
	</refentry>

	<refentry id="ST_Force_3DM">
	  <refnamediv>
		<refname>ST_Force3DM</refname>

		<refpurpose>Force the geometries into XYM mode.</refpurpose>
	  </refnamediv>

	  <refsynopsisdiv>
		<funcsynopsis>
		  <funcprototype>
			<funcdef>geometry <function>ST_Force3DM</function></funcdef>
			<paramdef><type>geometry </type> <parameter>geomA</parameter></paramdef>
			<paramdef><type>float </type> <parameter>Mvalue = 0.0</parameter></paramdef>
		  </funcprototype>
		</funcsynopsis>
	  </refsynopsisdiv>

	  <refsection>
		<title>Description</title>

		<para>Forces the geometries into XYM mode. If a geometry has no M component, then a <parameter>Mvalue</parameter> M coordinate is tacked on.  If it has a Z component, then Z is removed</para>


		<para>Changed: 2.1.0. Up to 2.0.x this was called ST_Force_3DM.</para>
		<para>Changed: 3.1.0. Added support for supplying a non-zero M value.</para>
		<para>&curve_support;</para>
	  </refsection>


	  <refsection>
		<title>Examples</title>

		<programlisting>
--Nothing happens to an already 3D geometry
SELECT ST_AsEWKT(ST_Force3DM(ST_GeomFromEWKT('CIRCULARSTRING(1 1 2, 2 3 2, 4 5 2, 6 7 2, 5 6 2)')));
				   st_asewkt
------------------------------------------------
 CIRCULARSTRINGM(1 1 0,2 3 0,4 5 0,6 7 0,5 6 0)


SELECT  ST_AsEWKT(ST_Force3DM('POLYGON((0 0 1,0 5 1,5 0 1,0 0 1),(1 1 1,3 1 1,1 3 1,1 1 1))'));

						  st_asewkt
---------------------------------------------------------------
 POLYGONM((0 0 0,0 5 0,5 0 0,0 0 0),(1 1 0,3 1 0,1 3 0,1 1 0))

		</programlisting>
	  </refsection>

	  <!-- Optionally add a "See Also" section -->
	  <refsection>
		<title>See Also</title>

		<para><xref linkend="ST_AsEWKT"/>,  <xref linkend="ST_Force2D"/>, <xref linkend="ST_Force_3DM"/>, <xref linkend="ST_Force_3D"/>, <xref linkend="ST_GeomFromEWKT"/></para>
	  </refsection>
	</refentry>

	<refentry id="ST_Force_4D">
	  <refnamediv>
		<refname>ST_Force4D</refname>

		<refpurpose>Force the geometries into XYZM mode.  </refpurpose>
	  </refnamediv>

	  <refsynopsisdiv>
		<funcsynopsis>
		  <funcprototype>
			<funcdef>geometry <function>ST_Force4D</function></funcdef>
			<paramdef><type>geometry </type> <parameter>geomA</parameter></paramdef>
			<paramdef><type>float </type> <parameter>Zvalue = 0.0</parameter></paramdef>
			<paramdef><type>float </type> <parameter>Mvalue = 0.0</parameter></paramdef>
		  </funcprototype>
		</funcsynopsis>
	  </refsynopsisdiv>

	  <refsection>
		<title>Description</title>

		<para>Forces the geometries into XYZM mode. <parameter>Zvalue</parameter> and <parameter>Mvalue</parameter> is tacked on for missing Z and M dimensions, respectively. </para>

		<para>Changed: 2.1.0. Up to 2.0.x this was called ST_Force_4D.</para>
		<para>Changed: 3.1.0. Added support for supplying non-zero Z and M values.</para>
		<para>&Z_support;</para>
		<para>&curve_support;</para>
	  </refsection>


	  <refsection>
		<title>Examples</title>

		<programlisting>
--Nothing happens to an already 3D geometry
SELECT ST_AsEWKT(ST_Force4D(ST_GeomFromEWKT('CIRCULARSTRING(1 1 2, 2 3 2, 4 5 2, 6 7 2, 5 6 2)')));
						st_asewkt
---------------------------------------------------------
 CIRCULARSTRING(1 1 2 0,2 3 2 0,4 5 2 0,6 7 2 0,5 6 2 0)



SELECT  ST_AsEWKT(ST_Force4D('MULTILINESTRINGM((0 0 1,0 5 2,5 0 3,0 0 4),(1 1 1,3 1 1,1 3 1,1 1 1))'));

									  st_asewkt
--------------------------------------------------------------------------------------
 MULTILINESTRING((0 0 0 1,0 5 0 2,5 0 0 3,0 0 0 4),(1 1 0 1,3 1 0 1,1 3 0 1,1 1 0 1))

		</programlisting>
	  </refsection>

	  <!-- Optionally add a "See Also" section -->
	  <refsection>
		<title>See Also</title>

		<para><xref linkend="ST_AsEWKT"/>, <xref linkend="ST_Force2D"/>, <xref linkend="ST_Force_3DM"/>, <xref linkend="ST_Force_3D"/></para>
	  </refsection>
	</refentry>

	<refentry id="ST_ForcePolygonCCW">
		<refnamediv>
			<refname>
				ST_ForcePolygonCCW
			</refname>
			<refpurpose>
				Orients all exterior rings counter-clockwise and all interior rings clockwise.
			</refpurpose>
		</refnamediv>

		<refsynopsisdiv>
			<funcsynopsis>
				<funcprototype>
					<funcdef>
						geometry
						<function>ST_ForcePolygonCCW</function>
					</funcdef>
					<paramdef>
						<type>geometry</type>
						<parameter>geom</parameter>
					</paramdef>
				</funcprototype>
			</funcsynopsis>
		</refsynopsisdiv>

		<refsection>
			<title>Description</title>

			<para>
				Forces (Multi)Polygons to use a counter-clockwise orientation for
				their exterior ring, and a clockwise orientation for their interior
				rings.  Non-polygonal geometries are returned unchanged.
			</para>

			<para>Availability: 2.4.0</para>
			<para>&Z_support;</para>
			<para>&M_support;</para>
		</refsection>

		<refsection>
			<title>See Also</title>
			<para>
				<xref linkend="ST_ForcePolygonCW" />,
				<xref linkend="ST_IsPolygonCCW" />,
				<xref linkend="ST_IsPolygonCW" />
			</para>
		</refsection>
	</refentry>

	<refentry id="ST_Force_Collection">
	  <refnamediv>
		<refname>ST_ForceCollection</refname>

		<refpurpose>Convert the geometry into a GEOMETRYCOLLECTION.</refpurpose>
	  </refnamediv>

	  <refsynopsisdiv>
		<funcsynopsis>
		  <funcprototype>
			<funcdef>geometry <function>ST_ForceCollection</function></funcdef>
			<paramdef><type>geometry </type> <parameter>geomA</parameter></paramdef>
		  </funcprototype>
		</funcsynopsis>
	  </refsynopsisdiv>

	  <refsection>
		<title>Description</title>

		<para>Converts the geometry into a GEOMETRYCOLLECTION. This is
			useful for simplifying the WKB representation.</para>

		<para>Enhanced: 2.0.0 support for Polyhedral surfaces was introduced.</para>
		<para>Availability: 1.2.2, prior to 1.3.4 this function will crash with Curves.  This is fixed in 1.3.4+</para>
		<para>Changed: 2.1.0. Up to 2.0.x this was called ST_Force_Collection.</para>

		<para>&P_support;</para>
		<para>&Z_support;</para>
		<para>&curve_support;</para>
	  </refsection>


	  <refsection>
		<title>Examples</title>

		<programlisting>

SELECT  ST_AsEWKT(ST_ForceCollection('POLYGON((0 0 1,0 5 1,5 0 1,0 0 1),(1 1 1,3 1 1,1 3 1,1 1 1))'));

								   st_asewkt
----------------------------------------------------------------------------------
 GEOMETRYCOLLECTION(POLYGON((0 0 1,0 5 1,5 0 1,0 0 1),(1 1 1,3 1 1,1 3 1,1 1 1)))


  SELECT ST_AsText(ST_ForceCollection('CIRCULARSTRING(220227 150406,2220227 150407,220227 150406)'));
								   st_astext
--------------------------------------------------------------------------------
 GEOMETRYCOLLECTION(CIRCULARSTRING(220227 150406,2220227 150407,220227 150406))
(1 row)

		</programlisting>

		<programlisting>
-- POLYHEDRAL example --
SELECT ST_AsEWKT(ST_ForceCollection('POLYHEDRALSURFACE(((0 0 0,0 0 1,0 1 1,0 1 0,0 0 0)),
 ((0 0 0,0 1 0,1 1 0,1 0 0,0 0 0)),
 ((0 0 0,1 0 0,1 0 1,0 0 1,0 0 0)),
 ((1 1 0,1 1 1,1 0 1,1 0 0,1 1 0)),
 ((0 1 0,0 1 1,1 1 1,1 1 0,0 1 0)),
 ((0 0 1,1 0 1,1 1 1,0 1 1,0 0 1)))'))

								   st_asewkt
----------------------------------------------------------------------------------
GEOMETRYCOLLECTION(
  POLYGON((0 0 0,0 0 1,0 1 1,0 1 0,0 0 0)),
  POLYGON((0 0 0,0 1 0,1 1 0,1 0 0,0 0 0)),
  POLYGON((0 0 0,1 0 0,1 0 1,0 0 1,0 0 0)),
  POLYGON((1 1 0,1 1 1,1 0 1,1 0 0,1 1 0)),
  POLYGON((0 1 0,0 1 1,1 1 1,1 1 0,0 1 0)),
  POLYGON((0 0 1,1 0 1,1 1 1,0 1 1,0 0 1))
)
		</programlisting>
	  </refsection>

	  <!-- Optionally add a "See Also" section -->
	  <refsection>
		<title>See Also</title>

		<para><xref linkend="ST_AsEWKT"/>,  <xref linkend="ST_Force2D"/>, <xref linkend="ST_Force_3DM"/>, <xref linkend="ST_Force_3D"/>, <xref linkend="ST_GeomFromEWKT"/></para>
	  </refsection>
	</refentry>

	<refentry id="ST_ForcePolygonCW">
		<refnamediv>
			<refname>
				ST_ForcePolygonCW
			</refname>
			<refpurpose>
				Orients all exterior rings clockwise and all interior rings counter-clockwise.
			</refpurpose>
		</refnamediv>

		<refsynopsisdiv>
			<funcsynopsis>
				<funcprototype>
					<funcdef>
						geometry
						<function>ST_ForcePolygonCW</function>
					</funcdef>
					<paramdef>
						<type>geometry</type>
						<parameter>geom</parameter>
					</paramdef>
				</funcprototype>
			</funcsynopsis>
		</refsynopsisdiv>

		<refsection>
			<title>Description</title>

			<para>
				Forces (Multi)Polygons to use a clockwise orientation for
				their exterior ring, and a counter-clockwise orientation for their interior
				rings.  Non-polygonal geometries are returned unchanged.
			</para>

			<para>Availability: 2.4.0</para>
			<para>&Z_support;</para>
			<para>&M_support;</para>
		</refsection>

		<refsection>
			<title>See Also</title>
			<para>
				<xref linkend="ST_ForcePolygonCCW" />,
				<xref linkend="ST_IsPolygonCCW" />,
				<xref linkend="ST_IsPolygonCW" />
			</para>
		</refsection>
	</refentry>

	<refentry id="ST_ForceSFS">
	  <refnamediv>
		<refname>ST_ForceSFS</refname>

		<refpurpose>Force the geometries to use SFS 1.1 geometry types only.</refpurpose>
	  </refnamediv>

	  <refsynopsisdiv>
		<funcsynopsis>
		  <funcprototype>
			<funcdef>geometry <function>ST_ForceSFS</function></funcdef>
			<paramdef><type>geometry </type> <parameter>geomA</parameter></paramdef>
		  </funcprototype>
		  <funcprototype>
			<funcdef>geometry <function>ST_ForceSFS</function></funcdef>
			<paramdef><type>geometry </type> <parameter>geomA</parameter></paramdef>
			<paramdef><type>text </type> <parameter>version</parameter></paramdef>
		  </funcprototype>
		</funcsynopsis>
	  </refsynopsisdiv>

	  <refsection>
		<title>Description</title>

		<para>&P_support;</para>
		<para>&T_support;</para>
		<para>&curve_support;</para>
		<para>&Z_support;</para>
	  </refsection>
	</refentry>


	<refentry id="ST_ForceRHR">
		<refnamediv>
			<refname>ST_ForceRHR</refname>

			<refpurpose>Force the orientation of the vertices in a polygon to follow the
				Right-Hand-Rule.</refpurpose>
		</refnamediv>

		<refsynopsisdiv>
			<funcsynopsis>
				<funcprototype>
					<funcdef>geometry
						<function>ST_ForceRHR</function></funcdef>
						<paramdef><type>geometry</type> <parameter>g</parameter></paramdef>
				</funcprototype>
			</funcsynopsis>
		</refsynopsisdiv>

		<refsection>
			<title>Description</title>

			<para>Forces the orientation of the vertices in a polygon to follow a
				Right-Hand-Rule, in which the area that is bounded by the
				polygon is to the right of the boundary. In particular, the exterior ring is
				orientated in a clockwise direction and the interior rings in a counter-clockwise
				direction.  This function is a synonym for <xref linkend="ST_ForcePolygonCW" /></para>

			<note>
				<para>
					The above definition of the Right-Hand-Rule conflicts with definitions used in other contexts.  To avoid confusion, it is recommended to use ST_ForcePolygonCW.
				</para>
			</note>

			<para>Enhanced: 2.0.0 support for Polyhedral surfaces was introduced.</para>
			<para>&Z_support;</para>
			<para>&P_support;</para>
		</refsection>

		<refsection>
			<title>Examples</title>

			<programlisting>SELECT ST_AsEWKT(
  ST_ForceRHR(
	'POLYGON((0 0 2, 5 0 2, 0 5 2, 0 0 2),(1 1 2, 1 3 2, 3 1 2, 1 1 2))'
  )
);
						  st_asewkt
--------------------------------------------------------------
 POLYGON((0 0 2,0 5 2,5 0 2,0 0 2),(1 1 2,3 1 2,1 3 2,1 1 2))
(1 row)</programlisting>
		</refsection>

		<refsection>
			<title>See Also</title>

			<para>
				<xref linkend="ST_ForcePolygonCCW"/>,
				<xref linkend="ST_ForcePolygonCW"/>,
				<xref linkend="ST_IsPolygonCCW"/>,
				<xref linkend="ST_IsPolygonCW"/>,
				<xref linkend="ST_BuildArea"/>,
				<xref linkend="ST_Polygonize"/>,
				<xref linkend="ST_Reverse"/></para>
		</refsection>
	</refentry>

	<refentry id="ST_ForceCurve">
		<refnamediv>
			<refname>ST_ForceCurve</refname>

			<refpurpose>Upcast a geometry into its curved type, if applicable.</refpurpose>
		</refnamediv>

		<refsynopsisdiv>
			<funcsynopsis>
				<funcprototype>
					<funcdef>geometry
						<function>ST_ForceCurve</function></funcdef>
						<paramdef><type>geometry</type> <parameter>g</parameter></paramdef>
				</funcprototype>
			</funcsynopsis>
		</refsynopsisdiv>

		<refsection>
			<title>Description</title>

			<para>
                        Turns a geometry into its curved representation, if applicable:
                        lines become compoundcurves, multilines become multicurves
                        polygons become curvepolygons multipolygons become multisurfaces. If the geometry input is already a curved representation returns back same as input.
                        </para>

		        <para>Availability: 2.2.0</para>
			<para>&Z_support;</para>
				<!-- Optionally mention Circular String Support -->
				<para>&curve_support;</para>
		</refsection>

		<refsection>
			<title>Examples</title>

			<programlisting>SELECT ST_AsText(
  ST_ForceCurve(
	'POLYGON((0 0 2, 5 0 2, 0 5 2, 0 0 2),(1 1 2, 1 3 2, 3 1 2, 1 1 2))'::geometry
  )
);
                              st_astext
----------------------------------------------------------------------
 CURVEPOLYGON Z ((0 0 2,5 0 2,0 5 2,0 0 2),(1 1 2,1 3 2,3 1 2,1 1 2))
(1 row)</programlisting>
		</refsection>

		<refsection>
			<title>See Also</title>

			<para><xref linkend="ST_LineToCurve"/></para>
		</refsection>
	</refentry>

    <refentry id="ST_LineToCurve">
      <refnamediv>
        <refname>ST_LineToCurve</refname>

        <refpurpose>Converts a linear geometry to a curved geometry.</refpurpose>
      </refnamediv>

      <refsynopsisdiv>
        <funcsynopsis>
          <funcprototype>
            <funcdef>geometry <function>ST_LineToCurve</function></funcdef>
            <paramdef><type>geometry </type> <parameter>geomANoncircular</parameter></paramdef>
          </funcprototype>
        </funcsynopsis>
      </refsynopsisdiv>

      <refsection>
        <title>Description</title>

        <para>Converts plain LINESTRING/POLYGON to CIRCULAR STRINGs and Curved Polygons.  Note much fewer points are needed to describe the curved equivalent.</para>
        <note><para>If the input LINESTRING/POLYGON is not curved enough to clearly represent a curve, the function will return the same input geometry.</para></note>
        <para>Availability: 1.3.0</para>
        <para>&Z_support;</para>
        <para>&curve_support;</para>
      </refsection>


      <refsection>
        <title>Examples</title>

        <programlisting> -- 2D Example
SELECT ST_AsText(ST_LineToCurve(foo.geom)) As curvedastext,ST_AsText(foo.geom) As non_curvedastext
    FROM (SELECT ST_Buffer('POINT(1 3)'::geometry, 3) As geom) As foo;

curvedatext                                                            non_curvedastext
--------------------------------------------------------------------|-----------------------------------------------------------------
CURVEPOLYGON(CIRCULARSTRING(4 3,3.12132034355964 0.878679656440359, | POLYGON((4 3,3.94235584120969 2.41472903395162,3.77163859753386 1.85194970290473,
1 0,-1.12132034355965 5.12132034355963,4 3))                        |  3.49440883690764 1.33328930094119,3.12132034355964 0.878679656440359,
                                                                    |  2.66671069905881 0.505591163092366,2.14805029709527 0.228361402466141,
                                                                    |  1.58527096604839 0.0576441587903094,1 0,
                                                                    |  0.414729033951621 0.0576441587903077,-0.148050297095264 0.228361402466137,
                                                                    |  -0.666710699058802 0.505591163092361,-1.12132034355964 0.878679656440353,
                                                                    |  -1.49440883690763 1.33328930094119,-1.77163859753386 1.85194970290472
                                                                    |  --ETC-- ,3.94235584120969 3.58527096604839,4 3))

--3D example
SELECT ST_AsText(ST_LineToCurve(geom)) As curved, ST_AsText(geom) AS not_curved
FROM (SELECT ST_Translate(ST_Force3D(ST_Boundary(ST_Buffer(ST_Point(1,3), 2,2))),0,0,3) AS geom) AS foo;

                        curved                        |               not_curved
------------------------------------------------------+---------------------------------------------------------------------
 CIRCULARSTRING Z (3 3 3,-1 2.99999999999999 3,3 3 3) | LINESTRING Z (3 3 3,2.4142135623731 1.58578643762691 3,1 1 3,
                                                      | -0.414213562373092 1.5857864376269 3,-1 2.99999999999999 3,
                                                      | -0.414213562373101 4.41421356237309 3,
                                                      | 0.999999999999991 5 3,2.41421356237309 4.4142135623731 3,3 3 3)
(1 row)
</programlisting>
    </refsection>



      <!-- Optionally add a "See Also" section -->
      <refsection>
        <title>See Also</title>

        <para><xref linkend="ST_CurveToLine" /></para>
      </refsection>
    </refentry>

	<refentry id="ST_Multi">
		<refnamediv>
			<refname>ST_Multi</refname>

			<refpurpose>Return the geometry as a MULTI* geometry.</refpurpose>
		</refnamediv>

		<refsynopsisdiv>
			<funcsynopsis>
			  <funcprototype>
				<funcdef>geometry <function>ST_Multi</function></funcdef>
				<paramdef><type>geometry </type> <parameter>geom</parameter></paramdef>
			  </funcprototype>
			</funcsynopsis>
		</refsynopsisdiv>

		<refsection>
			<title>Description</title>

			<para>Returns the geometry as a MULTI* geometry collection. If the geometry
				is already a collection, it is returned unchanged.</para>

		</refsection>

		<refsection>
			<title>Examples</title>

<programlisting>
SELECT ST_AsText(ST_Multi('POLYGON ((10 30, 30 30, 30 10, 10 10, 10 30))'));
                    st_astext
    -------------------------------------------------
    MULTIPOLYGON(((10 30,30 30,30 10,10 10,10 30)))
</programlisting>
		</refsection>
		<refsection>
			<title>See Also</title>
			<para><xref linkend="ST_AsText" /></para>
		</refsection>
	</refentry>

	<refentry id="ST_Normalize">
		<refnamediv>
			<refname>ST_Normalize</refname>

			<refpurpose>Return the geometry in its canonical form.</refpurpose>
		</refnamediv>

		<refsynopsisdiv>
			<funcsynopsis>
			  <funcprototype>
				<funcdef>geometry <function>ST_Normalize</function></funcdef>
				<paramdef><type>geometry </type> <parameter>geom</parameter></paramdef>
			  </funcprototype>
			</funcsynopsis>
		</refsynopsisdiv>

		<refsection>
			<title>Description</title>

			<para>
        Returns the geometry in its normalized/canonical form.
        May reorder vertices in polygon rings, rings in a polygon,
        elements in a multi-geometry complex.
      </para>

			<para>
        Mostly only useful for testing purposes (comparing expected
        and obtained results).
      </para>

      <para>Availability: 2.3.0</para>

		</refsection>

		<refsection>
			<title>Examples</title>

			<programlisting>
SELECT ST_AsText(ST_Normalize(ST_GeomFromText(
  'GEOMETRYCOLLECTION(
    POINT(2 3),
    MULTILINESTRING((0 0, 1 1),(2 2, 3 3)),
    POLYGON(
      (0 10,0 0,10 0,10 10,0 10),
      (4 2,2 2,2 4,4 4,4 2),
      (6 8,8 8,8 6,6 6,6 8)
    )
  )'
)));
                                                                     st_astext
----------------------------------------------------------------------------------------------------------------------------------------------------
 GEOMETRYCOLLECTION(POLYGON((0 0,0 10,10 10,10 0,0 0),(6 6,8 6,8 8,6 8,6 6),(2 2,4 2,4 4,2 4,2 2)),MULTILINESTRING((2 2,3 3),(0 0,1 1)),POINT(2 3))
(1 row)
			</programlisting>
		</refsection>
		<refsection>
			<title>See Also</title>
			<para>
        <xref linkend="ST_Equals" />,
      </para>
		</refsection>
	</refentry>

	<refentry id="ST_QuantizeCoordinates">
		<refnamediv>
			<refname>
				ST_QuantizeCoordinates
			</refname>
			<refpurpose>
				Sets least significant bits of coordinates to zero
			</refpurpose>
		</refnamediv>

		<refsynopsisdiv>
			<funcsynopsis>
				<funcprototype>
					<funcdef>
						geometry
						<function>ST_QuantizeCoordinates</function>
					</funcdef>
					<paramdef>
						<type>geometry</type>
						<parameter>g</parameter>
					</paramdef>
					<paramdef>
						<type>int</type>
						<parameter>prec_x</parameter>
					</paramdef>
					<paramdef>
						<type>int</type>
						<parameter>prec_y</parameter>
					</paramdef>
					<paramdef>
						<type>int</type>
						<parameter>prec_z</parameter>
					</paramdef>
					<paramdef>
						<type>int</type>
						<parameter>prec_m</parameter>
					</paramdef>
				</funcprototype>
			</funcsynopsis>
		</refsynopsisdiv>

		<refsection>
			<title>Description</title>
			<para>
				<code>ST_QuantizeCoordinates</code> determines the number of bits
				(<code>N</code>) required to represent a coordinate value with a
				specified number of digits after the decimal point, and then sets
				all but the <code>N</code> most significant bits to zero. The
				resulting coordinate value will still round to the original value,
				but will have improved compressiblity. This can result in a
				significant disk usage reduction provided that the geometry column
				is using a <ulink
				url="https://www.postgresql.org/docs/current/static/storage-toast.html#STORAGE-TOAST-ONDISK">
				compressible storage type</ulink>. The function allows
				specification of a different number of digits after the decimal
				point in each dimension; unspecified dimensions are assumed to have
				the precision of the <code>x</code> dimension. Negative digits are
				interpreted to refer digits to the left of the decimal point, (i.e.,
				<code>prec_x=-2</code> will preserve coordinate values to the
				nearest 100.
			</para>
			<para>
				The coordinates produced by <code>ST_QuantizeCoordinates</code> are
				independent of the geometry that contains those coordinates and the
				relative position of those coordinates within the geometry. As a result,
				existing topological relationships between geometries are unaffected
				by use of this function. The function may produce invalid geometry
				when it is called with a number of digits lower than the intrinsic
				precision of the geometry.
			</para>
			<para>Availability: 2.5.0</para>
		</refsection>
		<refsection>
			<title>Technical Background</title>
			<para>
				PostGIS stores all coordinate values as double-precision floating
				point integers, which can reliably represent 15 significant digits.
				However, PostGIS may be used to manage data that intrinsically has
				fewer than 15 significant digits. An example is TIGER data, which is
				provided as geographic coordinates with six digits of precision
				after the decimal point (thus requiring only nine significant digits
				of longitude and eight significant digits of latitude.)
			</para>
			<para>
				When 15 significant digits are available, there are many possible
				representations of a number with 9 significant digits.  A double
				precision floating point number uses 52 explicit bits to represent
				the significand (mantissa) of the coordinate. Only 30 bits are needed
				to represent a mantissa with 9 significant digits, leaving 22
				insignificant bits; we can set their value to anything we like and
				still end up with a number that rounds to our input value.  For
				example, the value 100.123456 can be represented by the floating
				point numbers closest to 100.123456000000, 100.123456000001, and
				100.123456432199. All are equally valid, in that
				<code>ST_AsText(geom, 6)</code> will return the same result with
				any of these inputs. As we can set these bits to any value,
				<code>ST_QuantizeCoordinates</code> sets the 22 insignificant
				bits to zero. For a long coordinate sequence this creates a
				pattern of blocks of consecutive zeros that is compressed
				by PostgreSQL more effeciently.
			</para>

			<note>
				<para>
					Only the on-disk size of the geometry is potentially affected by
					<code>ST_QuantizeCoordinates</code>.  <xref linkend="ST_MemSize" />,
					which reports the in-memory usage of the geometry, will return the
					the same value regardless of the disk space used by a geometry.
				</para>
			</note>
		</refsection>

		<refsection>
			<title>Examples</title>

			<programlisting>SELECT ST_AsText(ST_QuantizeCoordinates('POINT (100.123456 0)'::geometry, 4));
st_astext
-------------------------
POINT(100.123455047607 0)
			</programlisting>

			<programlisting>WITH test AS (SELECT 'POINT (123.456789123456 123.456789123456)'::geometry AS geom)
SELECT
  digits,
  encode(ST_QuantizeCoordinates(geom, digits), 'hex'),
  ST_AsText(ST_QuantizeCoordinates(geom, digits))
FROM test, generate_series(15, -15, -1) AS digits;

digits  |                   encode                   |                st_astext
--------+--------------------------------------------+------------------------------------------
15      | 01010000005f9a72083cdd5e405f9a72083cdd5e40 | POINT(123.456789123456 123.456789123456)
14      | 01010000005f9a72083cdd5e405f9a72083cdd5e40 | POINT(123.456789123456 123.456789123456)
13      | 01010000005f9a72083cdd5e405f9a72083cdd5e40 | POINT(123.456789123456 123.456789123456)
12      | 01010000005c9a72083cdd5e405c9a72083cdd5e40 | POINT(123.456789123456 123.456789123456)
11      | 0101000000409a72083cdd5e40409a72083cdd5e40 | POINT(123.456789123456 123.456789123456)
10      | 0101000000009a72083cdd5e40009a72083cdd5e40 | POINT(123.456789123455 123.456789123455)
9       | 0101000000009072083cdd5e40009072083cdd5e40 | POINT(123.456789123418 123.456789123418)
8       | 0101000000008072083cdd5e40008072083cdd5e40 | POINT(123.45678912336 123.45678912336)
7       | 0101000000000070083cdd5e40000070083cdd5e40 | POINT(123.456789121032 123.456789121032)
6       | 0101000000000040083cdd5e40000040083cdd5e40 | POINT(123.456789076328 123.456789076328)
5       | 0101000000000000083cdd5e40000000083cdd5e40 | POINT(123.456789016724 123.456789016724)
4       | 0101000000000000003cdd5e40000000003cdd5e40 | POINT(123.456787109375 123.456787109375)
3       | 0101000000000000003cdd5e40000000003cdd5e40 | POINT(123.456787109375 123.456787109375)
2       | 01010000000000000038dd5e400000000038dd5e40 | POINT(123.45654296875 123.45654296875)
1       | 01010000000000000000dd5e400000000000dd5e40 | POINT(123.453125 123.453125)
0       | 01010000000000000000dc5e400000000000dc5e40 | POINT(123.4375 123.4375)
-1      | 01010000000000000000c05e400000000000c05e40 | POINT(123 123)
-2      | 01010000000000000000005e400000000000005e40 | POINT(120 120)
-3      | 010100000000000000000058400000000000005840 | POINT(96 96)
-4      | 010100000000000000000058400000000000005840 | POINT(96 96)
-5      | 010100000000000000000058400000000000005840 | POINT(96 96)
-6      | 010100000000000000000058400000000000005840 | POINT(96 96)
-7      | 010100000000000000000058400000000000005840 | POINT(96 96)
-8      | 010100000000000000000058400000000000005840 | POINT(96 96)
-9      | 010100000000000000000058400000000000005840 | POINT(96 96)
-10     | 010100000000000000000058400000000000005840 | POINT(96 96)
-11     | 010100000000000000000058400000000000005840 | POINT(96 96)
-12     | 010100000000000000000058400000000000005840 | POINT(96 96)
-13     | 010100000000000000000058400000000000005840 | POINT(96 96)
-14     | 010100000000000000000058400000000000005840 | POINT(96 96)
-15     | 010100000000000000000058400000000000005840 | POINT(96 96)
</programlisting>

		</refsection>

		<refsection>
			<title>See Also</title>

			<para><xref linkend="ST_SnapToGrid" /></para>
		</refsection>

	</refentry>


	<refentry id="ST_RemovePoint">
	  <refnamediv>
		<refname>ST_RemovePoint</refname>
		<refpurpose>Remove a point from a linestring.</refpurpose>
	  </refnamediv>
	  <refsynopsisdiv>
		<funcsynopsis>
		  <funcprototype>
			<funcdef>geometry <function>ST_RemovePoint</function></funcdef>
			<paramdef><type>geometry</type> <parameter>linestring</parameter></paramdef>
			<paramdef><type>integer</type> <parameter>offset</parameter></paramdef>
		  </funcprototype>
		 </funcsynopsis>
	  </refsynopsisdiv>

	  <refsection>
		<title>Description</title>

		<para>Removes a point from a LineString, given its index (0-based).
        Useful for turning a closed line (ring) into an open linestring.
        </para>
        <para>Enhanced: 3.2.0</para>
		<para>Availability: 1.1.0</para>
		<para>&Z_support;</para>
	  </refsection>

	  <refsection>
		<title>Examples</title>
<para>Guarantees no lines are closed by removing the end point of closed lines (rings).
Assumes geom is of type LINESTRING</para>
<programlisting>
UPDATE sometable
	SET geom = ST_RemovePoint(geom, ST_NPoints(geom) - 1)
	FROM sometable
	WHERE ST_IsClosed(geom);
</programlisting>
	  </refsection>
	  <refsection>
		<title>See Also</title>
		<para><xref linkend="ST_AddPoint"/>, <xref linkend="ST_NPoints"/>, <xref linkend="ST_NumPoints"/></para>
	  </refsection>
	</refentry>

    <refentry id="ST_RemoveRepeatedPoints">
      <refnamediv>
        <refname>ST_RemoveRepeatedPoints</refname>
        <refpurpose>Returns a version of a geometry with
                duplicate points removed.</refpurpose>
      </refnamediv>

      <refsynopsisdiv>
        <funcsynopsis>
          <funcprototype>
            <funcdef>geometry <function>ST_RemoveRepeatedPoints</function></funcdef>
            <paramdef><type>geometry</type> <parameter>geom</parameter></paramdef>
            <paramdef choice="opt"><type>float8</type> <parameter>tolerance</parameter></paramdef>
          </funcprototype>
        </funcsynopsis>
      </refsynopsisdiv>

      <refsection>
        <title>Description</title>
        <para>Returns a version of the given geometry with duplicate consecutive points removed.
                The function processes only (Multi)LineStrings, (Multi)Polygons and MultiPoints
                but it can be called with any kind of geometry.
                Elements of GeometryCollections are processed individually.
                The endpoints of LineStrings are preserved.
        </para>

        <para>If the <parameter>tolerance</parameter> parameter is provided, vertices within the tolerance distance
        of one another are considered to be duplicates.</para>

        <para>Enhanced: 3.2.0</para>
        <para>Availability: 2.2.0</para>
        <para>&P_support;</para>
        <para>&Z_support;</para>
      </refsection>

	  <refsection>
		<title>Examples</title>

		<programlisting>
SELECT ST_AsText( ST_RemoveRepeatedPoints( 'MULTIPOINT ((1 1), (2 2), (3 3), (2 2))'));
-------------------------
 MULTIPOINT(1 1,2 2,3 3)
</programlisting>

		<programlisting>
SELECT ST_AsText( ST_RemoveRepeatedPoints( 'LINESTRING (0 0, 0 0, 1 1, 0 0, 1 1, 2 2)'));
---------------------------------
 LINESTRING(0 0,1 1,0 0,1 1,2 2)
</programlisting>

      <para><emphasis role="bold">Example:</emphasis>
      Collection elements are processed individually.
      </para>
		<programlisting>
SELECT ST_AsText( ST_RemoveRepeatedPoints( 'GEOMETRYCOLLECTION (LINESTRING (1 1, 2 2, 2 2, 3 3), POINT (4 4), POINT (4 4), POINT (5 5))'));
------------------------------------------------------------------------------
 GEOMETRYCOLLECTION(LINESTRING(1 1,2 2,3 3),POINT(4 4),POINT(4 4),POINT(5 5))
</programlisting>

      <para><emphasis role="bold">Example:</emphasis>
      Repeated point removal with a distance tolerance.
      </para>
		<programlisting>
SELECT ST_AsText( ST_RemoveRepeatedPoints( 'LINESTRING (0 0, 0 0, 1 1, 5 5, 1 1, 2 2)', 2));
-------------------------
 LINESTRING(0 0,5 5,2 2)
</programlisting>

	  </refsection>

          <refsection>
            <title>See Also</title>
            <para><xref linkend="ST_Simplify" /></para>
          </refsection>
    </refentry>

	<refentry id="ST_Reverse">
	  <refnamediv>
		<refname>ST_Reverse</refname>
		<refpurpose>Return the geometry with vertex order reversed.</refpurpose>
	  </refnamediv>

	  <refsynopsisdiv>
		<funcsynopsis>
		  <funcprototype>
			<funcdef>geometry <function>ST_Reverse</function></funcdef>
			<paramdef><type>geometry </type> <parameter>g1</parameter></paramdef>
		  </funcprototype>
		 </funcsynopsis>
	  </refsynopsisdiv>

	  <refsection>
		<title>Description</title>

		<para>Can be used on any geometry and reverses the order of the vertexes.</para>

		<para>Enhanced: 2.4.0 support for curves was introduced.</para>
		<para>&Z_support;</para>
		<para>&P_support;</para>
	  </refsection>

	  <refsection>
		<title>Examples</title>
		<programlisting>
SELECT ST_AsText(geom) as line, ST_AsText(ST_Reverse(geom)) As reverseline
FROM
(SELECT ST_MakeLine(ST_Point(1,2),
		ST_Point(1,10)) As geom) as foo;
--result
		line         |     reverseline
---------------------+----------------------
LINESTRING(1 2,1 10) | LINESTRING(1 10,1 2)
</programlisting>
	  </refsection>
	</refentry>

	<refentry id="ST_Segmentize">
		<refnamediv>
			<refname>ST_Segmentize</refname>

			<refpurpose>Return a modified geometry/geography having no segment longer than the
			given distance.</refpurpose>
		</refnamediv>

		<refsynopsisdiv>
			<funcsynopsis>
			  <funcprototype>
				<funcdef>geometry <function>ST_Segmentize</function></funcdef>
				<paramdef><type>geometry </type> <parameter>geom</parameter></paramdef>
				<paramdef><type>float </type> <parameter>max_segment_length</parameter></paramdef>
			  </funcprototype>
			  <funcprototype>
				<funcdef>geography <function>ST_Segmentize</function></funcdef>
				<paramdef><type>geography </type> <parameter>geog</parameter></paramdef>
				<paramdef><type>float </type> <parameter>max_segment_length</parameter></paramdef>
			  </funcprototype>
			</funcsynopsis>
		</refsynopsisdiv>

		<refsection>
			<title>Description</title>

			<para>Returns a modified geometry having no segment longer than the
			given <varname>max_segment_length</varname>.  Distance computation is performed in 2d
			only. For geometry, length units are in units of spatial reference.  For geography, units are in meters.</para>
			<para>Availability: 1.2.2</para>
			<para>Enhanced: 3.0.0 Segmentize geometry now uses equal length segments</para>
			<para>Enhanced: 2.3.0 Segmentize geography now uses equal length segments</para>
			<para>Enhanced: 2.1.0 support for geography was introduced.</para>
			<para>Changed: 2.1.0 As a result of the introduction of geography support: The construct <code>SELECT ST_Segmentize('LINESTRING(1 2, 3 4)',0.5);</code> will result in ambiguous function error.  You need to have properly typed object e.g. a geometry/geography column, use ST_GeomFromText, ST_GeogFromText or
				<code>SELECT ST_Segmentize('LINESTRING(1 2, 3 4)'::geometry,0.5);</code></para>
			<note><para>This will only increase segments.  It will not lengthen segments shorter than
			max length</para></note>
		</refsection>

		<refsection>
			<title>Examples</title>

			<programlisting>SELECT ST_AsText(ST_Segmentize(
ST_GeomFromText('MULTILINESTRING((-29 -27,-30 -29.7,-36 -31,-45 -33),(-45 -33,-46 -32))')
		,5)
);
st_astext
--------------------------------------------------------------------------------------------------
MULTILINESTRING((-29 -27,-30 -29.7,-34.886615700134 -30.758766735029,-36 -31,
-40.8809353009198 -32.0846522890933,-45 -33),
(-45 -33,-46 -32))
(1 row)

SELECT ST_AsText(ST_Segmentize(ST_GeomFromText('POLYGON((-29 28, -30 40, -29 28))'),10));
st_astext
-----------------------
POLYGON((-29 28,-29.8304547985374 37.9654575824488,-30 40,-29.1695452014626 30.0345424175512,-29 28))
(1 row)

			</programlisting>
		</refsection>
		<refsection>
			<title>See Also</title>
			<para><xref linkend="ST_LineSubstring" /></para>
		</refsection>
	</refentry>

	<refentry id="ST_SetPoint">
		  <refnamediv>
			<refname>ST_SetPoint</refname>
			<refpurpose>Replace point of a linestring with a given point.</refpurpose>
		  </refnamediv>
		  <refsynopsisdiv>
			 <funcsynopsis>
			  <funcprototype>
				<funcdef>geometry <function>ST_SetPoint</function></funcdef>
				<paramdef><type>geometry</type> <parameter>linestring</parameter></paramdef>
				<paramdef><type>integer</type> <parameter>zerobasedposition</parameter></paramdef>
				<paramdef><type>geometry</type> <parameter>point</parameter></paramdef>
			  </funcprototype>
			 </funcsynopsis>
		  </refsynopsisdiv>

		  <refsection>
			<title>Description</title>

			<para>Replace point N of linestring with given point. Index is
			0-based.Negative index are counted backwards, so that -1 is last point.
				This is especially useful in triggers when trying to maintain relationship of joints when one vertex moves.</para>
			<para>Availability: 1.1.0</para>
			<para>Updated 2.3.0 : negative indexing</para>

			<para>&Z_support;</para>
		  </refsection>

		  <refsection>
			<title>Examples</title>
			<programlisting>
--Change first point in line string from -1 3 to -1 1
SELECT ST_AsText(ST_SetPoint('LINESTRING(-1 2,-1 3)', 0, 'POINT(-1 1)'));
	   st_astext
-----------------------
 LINESTRING(-1 1,-1 3)

---Change last point in a line string (lets play with 3d linestring this time)
SELECT ST_AsEWKT(ST_SetPoint(foo.geom, ST_NumPoints(foo.geom) - 1, ST_GeomFromEWKT('POINT(-1 1 3)')))
FROM (SELECT ST_GeomFromEWKT('LINESTRING(-1 2 3,-1 3 4, 5 6 7)') As geom) As foo;
	   st_asewkt
-----------------------
LINESTRING(-1 2 3,-1 3 4,-1 1 3)

SELECT ST_AsText(ST_SetPoint(g, -3, p))
FROM ST_GEomFromText('LINESTRING(0 0, 1 1, 2 2, 3 3, 4 4)') AS g
	, ST_PointN(g,1) as p;
	   st_astext
-----------------------
LINESTRING(0 0,1 1,0 0,3 3,4 4)

			</programlisting>
		  </refsection>
		  <refsection>
			<title>See Also</title>
			<para><xref linkend="ST_AddPoint"/>, <xref linkend="ST_NPoints"/>, <xref linkend="ST_NumPoints"/>, <xref linkend="ST_PointN"/>, <xref linkend="ST_RemovePoint"/></para>
		  </refsection>
	</refentry>

    <refentry id="ST_Shift_Longitude">
      <refnamediv>
        <refname>ST_ShiftLongitude</refname>

        <refpurpose>Shifts the longitude coordinates of a geometry between -180..180 and 0..360.</refpurpose>
      </refnamediv>

      <refsynopsisdiv>
        <funcsynopsis>
          <funcprototype>
            <funcdef>geometry <function>ST_ShiftLongitude</function></funcdef>
            <paramdef><type>geometry </type> <parameter>geom</parameter></paramdef>
          </funcprototype>
        </funcsynopsis>
      </refsynopsisdiv>

      <refsection>
        <title>Description</title>

        <para>Reads every point/vertex in a geometry, and shifts its longitude coordinate from -180..0 to 180..360 and vice versa if between these ranges.
            This function is symmetrical so the result is a 0..360 representation of a -180..180 data and a -180..180 representation of a 0..360 data.
            </para>
        <note><para>This is only useful for data with coordinates in
        longitude/latitude; e.g. SRID 4326 (WGS 84 geographic)</para></note>

        <warning>
            <para>Pre-1.3.4 bug prevented this from working for MULTIPOINT. 1.3.4+ works with MULTIPOINT as well.</para>
    </warning>

        <para>&Z_support;</para>
        <para>Enhanced: 2.0.0 support for Polyhedral surfaces and TIN was introduced.</para>
    <para>NOTE: this function was renamed from "ST_Shift_Longitude" in 2.2.0</para>
        <para>&P_support;</para>
        <para>&T_support;</para>
      </refsection>


      <refsection>
        <title>Examples</title>

        <programlisting>--single point forward transformation
SELECT ST_AsText(ST_ShiftLongitude('SRID=4326;POINT(270 0)'::geometry))

st_astext
----------
POINT(-90 0)


--single point reverse transformation
SELECT ST_AsText(ST_ShiftLongitude('SRID=4326;POINT(-90 0)'::geometry))

st_astext
----------
POINT(270 0)


--for linestrings the functions affects only to the sufficient coordinates
SELECT ST_AsText(ST_ShiftLongitude('SRID=4326;LINESTRING(174 12, 182 13)'::geometry))

st_astext
----------
LINESTRING(174 12,-178 13)
        </programlisting>
      </refsection>

      <!-- Optionally add a "See Also" section -->
      <refsection>
        <title>See Also</title>
        <para>
      <xref linkend="ST_WrapX" />
    </para>
      </refsection>
    </refentry>

    <refentry id="ST_WrapX">
      <refnamediv>
        <refname>ST_WrapX</refname>

        <refpurpose>Wrap a geometry around an X value.</refpurpose>
      </refnamediv>

      <refsynopsisdiv>
        <funcsynopsis>
          <funcprototype>
            <funcdef>geometry <function>ST_WrapX</function></funcdef>
            <paramdef><type>geometry </type> <parameter>geom</parameter></paramdef>
            <paramdef><type>float8 </type> <parameter>wrap</parameter></paramdef>
            <paramdef><type>float8 </type> <parameter>move</parameter></paramdef>
          </funcprototype>
        </funcsynopsis>
      </refsynopsisdiv>

      <refsection>
        <title>Description</title>

    <para>
This function splits the input geometries and then moves every resulting
component falling on the right (for negative 'move') or on the left (for
positive 'move') of given 'wrap' line in the direction specified by the
'move' parameter, finally re-unioning the pieces together.
    </para>

        <note><para>
This is useful to "recenter" long-lat input to have features
of interest not spawned from one side to the other.
    </para></note>

        <para>Availability: 2.3.0 requires GEOS</para>
        <para>&Z_support;</para>
<!-- TODO: check these
        <para>&P_support;</para>
        <para>&T_support;</para>
-->
      </refsection>


      <refsection>
        <title>Examples</title>

        <programlisting>
-- Move all components of the given geometries whose bounding box
-- falls completely on the left of x=0 to +360
select ST_WrapX(geom, 0, 360);

-- Move all components of the given geometries whose bounding box
-- falls completely on the left of x=-30 to +360
select ST_WrapX(geom, -30, 360);
        </programlisting>
      </refsection>

      <!-- Optionally add a "See Also" section -->
      <refsection>
        <title>See Also</title>
        <para><xref linkend="ST_Shift_Longitude" /></para>
      </refsection>
    </refentry>

	<refentry id="ST_SnapToGrid">
	  <refnamediv>
		<refname>ST_SnapToGrid</refname>

		<refpurpose>
		Snap all points of the input geometry to a regular grid.
		</refpurpose>
	  </refnamediv>

	  <refsynopsisdiv>
		<funcsynopsis>
		  <funcprototype>
			<funcdef>geometry <function>ST_SnapToGrid</function></funcdef>
			<paramdef><type>geometry </type> <parameter>geomA</parameter></paramdef>
			<paramdef><type>float </type> <parameter>originX</parameter></paramdef>
			<paramdef><type>float </type> <parameter>originY</parameter></paramdef>
			<paramdef><type>float </type> <parameter>sizeX</parameter></paramdef>
			<paramdef><type>float </type> <parameter>sizeY</parameter></paramdef>
		  </funcprototype>

		  <funcprototype>
			<funcdef>geometry <function>ST_SnapToGrid</function></funcdef>
			<paramdef><type>geometry </type> <parameter>geomA</parameter></paramdef>
			<paramdef><type>float </type> <parameter>sizeX</parameter></paramdef>
			<paramdef><type>float </type> <parameter>sizeY</parameter></paramdef>
		  </funcprototype>

		  <funcprototype>
			<funcdef>geometry <function>ST_SnapToGrid</function></funcdef>
			<paramdef><type>geometry </type> <parameter>geomA</parameter></paramdef>
			<paramdef><type>float </type> <parameter>size</parameter></paramdef>
		  </funcprototype>

		  <funcprototype>
			<funcdef>geometry <function>ST_SnapToGrid</function></funcdef>
			<paramdef><type>geometry </type> <parameter>geomA</parameter></paramdef>
			<paramdef><type>geometry </type> <parameter>pointOrigin</parameter></paramdef>
			<paramdef><type>float </type> <parameter>sizeX</parameter></paramdef>
			<paramdef><type>float </type> <parameter>sizeY</parameter></paramdef>
			<paramdef><type>float </type> <parameter>sizeZ</parameter></paramdef>
			<paramdef><type>float </type> <parameter>sizeM</parameter></paramdef>
		  </funcprototype>
		</funcsynopsis>
	  </refsynopsisdiv>

	  <refsection>
		<title>Description</title>

		<para>Variant 1,2,3: Snap all points of the input geometry to the grid defined by
			its origin and cell size. Remove consecutive points falling on the
			same cell, eventually returning NULL if output points are not
			enough to define a geometry of the given type. Collapsed
			geometries in a collection are stripped from it.
			Useful for reducing precision.
		</para>

		<para>Variant 4:  Introduced 1.1.0 - Snap all points of the input geometry to the grid defined by
			its origin (the second argument, must be a point) and cell sizes.
			Specify 0 as size for any dimension you don't want to snap to a
			grid.</para>

		<note>
		  <para>The returned geometry might lose its simplicity (see
		  <xref linkend="ST_IsSimple" />).</para>
		</note>

		<note>
		  <para>Before release 1.1.0 this function always returned a 2d
		  geometry. Starting at 1.1.0 the returned geometry will have same
		  dimensionality as the input one with higher dimension values
		  untouched. Use the version taking a second geometry argument to
		  define all grid dimensions.</para>
		</note>

		<para>Availability: 1.0.0RC1</para>
		<para>Availability: 1.1.0 - Z and M support</para>

		<para>&Z_support;</para>
	  </refsection>


	  <refsection>
		<title>Examples</title>

		<programlisting>
--Snap your geometries to a precision grid of 10^-3
UPDATE mytable
   SET geom = ST_SnapToGrid(geom, 0.001);

SELECT ST_AsText(ST_SnapToGrid(
			ST_GeomFromText('LINESTRING(1.1115678 2.123, 4.111111 3.2374897, 4.11112 3.23748667)'),
			0.001)
		);
			  st_astext
-------------------------------------
 LINESTRING(1.112 2.123,4.111 3.237)
 --Snap a 4d geometry
SELECT ST_AsEWKT(ST_SnapToGrid(
	ST_GeomFromEWKT('LINESTRING(-1.1115678 2.123 2.3456 1.11111,
		4.111111 3.2374897 3.1234 1.1111, -1.11111112 2.123 2.3456 1.1111112)'),
 ST_GeomFromEWKT('POINT(1.12 2.22 3.2 4.4444)'),
 0.1, 0.1, 0.1, 0.01) );
								  st_asewkt
------------------------------------------------------------------------------
 LINESTRING(-1.08 2.12 2.3 1.1144,4.12 3.22 3.1 1.1144,-1.08 2.12 2.3 1.1144)


--With a 4d geometry - the ST_SnapToGrid(geom,size) only touches x and y coords but keeps m and z the same
SELECT ST_AsEWKT(ST_SnapToGrid(ST_GeomFromEWKT('LINESTRING(-1.1115678 2.123 3 2.3456,
		4.111111 3.2374897 3.1234 1.1111)'),
	   0.01)      );
						st_asewkt
---------------------------------------------------------
 LINESTRING(-1.11 2.12 3 2.3456,4.11 3.24 3.1234 1.1111)

		</programlisting>
	  </refsection>

	  <!-- Optionally add a "See Also" section -->
	  <refsection>
		<title>See Also</title>

		<para>
		<xref linkend="ST_Snap" />,
		<xref linkend="ST_AsEWKT" />,
		<xref linkend="ST_AsText" />,
		<xref linkend="ST_GeomFromText" />,
		<xref linkend="ST_GeomFromEWKT" />,
		<xref linkend="ST_Simplify" />
		</para>
	  </refsection>
	</refentry>

		<refentry id="ST_Snap">
	  <refnamediv>
		<refname>ST_Snap</refname>

		<refpurpose>
	Snap segments and vertices of input geometry
	to vertices of a reference geometry.
		</refpurpose>
	  </refnamediv>

	  <refsynopsisdiv>
		<funcsynopsis>
		  <funcprototype>
			<funcdef>geometry <function>ST_Snap</function></funcdef>
			<paramdef><type>geometry </type> <parameter>input</parameter></paramdef>
			<paramdef><type>geometry </type> <parameter>reference</parameter></paramdef>
			<paramdef><type>float </type> <parameter>tolerance</parameter></paramdef>
		  </funcprototype>
		</funcsynopsis>
	  </refsynopsisdiv>

	  <refsection>
		<title>Description</title>

		<para>
 Snaps the vertices and segments of a geometry to
 another Geometry's vertices.
 A snap distance tolerance is used to control where snapping is performed.
  The result geometry is the input geometry with the vertices snapped.
	If no snapping occurs then the input geometry is returned unchanged.
		</para>
		<para>
 Snapping one geometry to another can improve
 robustness for overlay operations by eliminating
 nearly-coincident edges
 (which cause problems during noding and intersection calculation).
		</para>

		<para>
 Too much snapping can result in invalid topology
 being created, so the number and location of snapped vertices
 is decided using heuristics to determine when it
 is safe to snap.
 This can result in some potential snaps being omitted, however.
		</para>

		<note>
		  <para>
		  The returned geometry might lose its simplicity (see
		  <xref linkend="ST_IsSimple" />) and validity (see
		  <xref linkend="ST_IsValid" />).
		  </para>
		</note>
		<para>Performed by the GEOS module.</para>
		<para>Availability: 2.0.0</para>
	  </refsection>

	  <refsection>
		<title>Examples</title>
			<informaltable>
				  <tgroup cols="2">
					<colspec colname="column1" />
					<colspec colname="column2" />
					<spanspec namest="column1" nameend="column2" spanname="span-horiz" align="center" />
					<tbody>
					  <row>
						<entry spanname="span-horiz"><para><informalfigure>
							<mediaobject>
							  <imageobject>
								<imagedata fileref="images/st_snap01.png" />
							  </imageobject>
							  <caption><para>A multipolygon shown with a linestring (before any snapping)</para></caption>
							</mediaobject>
						  </informalfigure></para>
					   </entry>
					  </row>
					  <row>
					   <entry><para><informalfigure>
							<mediaobject>
							  <imageobject>
								<imagedata fileref="images/st_snap02.png" />
							  </imageobject>
							  <caption><para>A multipolygon snapped to linestring to tolerance: 1.01 of distance.
							  The new multipolygon is shown with reference linestring</para></caption>
							</mediaobject>
						  </informalfigure>
				<programlisting>
SELECT ST_AsText(ST_Snap(poly,line, ST_Distance(poly,line)*1.01)) AS polysnapped
FROM (SELECT
   ST_GeomFromText('MULTIPOLYGON(
     ((26 125, 26 200, 126 200, 126 125, 26 125 ),
      ( 51 150, 101 150, 76 175, 51 150 )),
      (( 151 100, 151 200, 176 175, 151 100 )))') As poly,
       ST_GeomFromText('LINESTRING (5 107, 54 84, 101 100)') As line
	) As foo;

                             polysnapped
---------------------------------------------------------------------
 MULTIPOLYGON(((26 125,26 200,126 200,126 125,101 100,26 125),
 (51 150,101 150,76 175,51 150)),((151 100,151 200,176 175,151 100)))
				</programlisting></para>
					</entry>
					<entry><para><informalfigure>
							<mediaobject>
							  <imageobject>
								<imagedata fileref="images/st_snap04.png" />
							  </imageobject>
							  <caption><para>A multipolygon snapped to linestring to tolerance: 1.25 of distance.
							  The new multipolygon is shown with reference linestring</para></caption>
							</mediaobject>
						  </informalfigure>
				<programlisting>
SELECT ST_AsText(
    ST_Snap(poly,line, ST_Distance(poly,line)*1.25)
  ) AS polysnapped
FROM (SELECT
  ST_GeomFromText('MULTIPOLYGON(
    (( 26 125, 26 200, 126 200, 126 125, 26 125 ),
      ( 51 150, 101 150, 76 175, 51 150 )),
      (( 151 100, 151 200, 176 175, 151 100 )))') As poly,
       ST_GeomFromText('LINESTRING (5 107, 54 84, 101 100)') As line
	) As foo;

                             polysnapped
---------------------------------------------------------------------
MULTIPOLYGON(((5 107,26 200,126 200,126 125,101 100,54 84,5 107),
(51 150,101 150,76 175,51 150)),((151 100,151 200,176 175,151 100)))
				</programlisting></para>
						</entry>
					</row>
					<row>
					   <entry><para><informalfigure>
							<mediaobject>
							  <imageobject>
								<imagedata fileref="images/st_snap03.png" />
							  </imageobject>
							  <caption><para>The linestring snapped to the original multipolygon  at tolerance 1.01 of distance.
							  The new linestring is shown with reference multipolygon</para></caption>
							</mediaobject>
						  </informalfigure>
				<programlisting>
SELECT ST_AsText(
   ST_Snap(line, poly, ST_Distance(poly,line)*1.01)
  ) AS linesnapped
FROM (SELECT
  ST_GeomFromText('MULTIPOLYGON(
     ((26 125, 26 200, 126 200, 126 125, 26 125),
      (51 150, 101 150, 76 175, 51 150 )),
      ((151 100, 151 200, 176 175, 151 100)))') As poly,
       ST_GeomFromText('LINESTRING (5 107, 54 84, 101 100)') As line
	) As foo;

              linesnapped
----------------------------------------
 LINESTRING(5 107,26 125,54 84,101 100)
				</programlisting>
						  </para>
					</entry>
					<entry><para><informalfigure>
							<mediaobject>
							  <imageobject>
								<imagedata fileref="images/st_snap05.png" />
							  </imageobject>
							  <caption><para>The linestring snapped to the original multipolygon  at tolerance 1.25 of distance.
							  The new linestring is shown with reference multipolygon</para></caption>
							</mediaobject>
						  </informalfigure>
				<programlisting>
SELECT ST_AsText(
 ST_Snap(line, poly, ST_Distance(poly,line)*1.25)
  ) AS linesnapped
FROM (SELECT
  ST_GeomFromText('MULTIPOLYGON(
     (( 26 125, 26 200, 126 200, 126 125, 26 125 ),
      (51 150, 101 150, 76 175, 51 150 )),
      ((151 100, 151 200, 176 175, 151 100 )))') As poly,
       ST_GeomFromText('LINESTRING (5 107, 54 84, 101 100)') As line
	) As foo;
              linesnapped
---------------------------------------
LINESTRING(26 125,54 84,101 100)
				</programlisting></para>
					</entry>
				</row>
		</tbody>
	</tgroup>
</informaltable>

	  </refsection>

	  <!-- Optionally add a "See Also" section -->
	  <refsection>
		<title>See Also</title>

		<para>
		<xref linkend="ST_SnapToGrid" />
		</para>
	  </refsection>
	</refentry>

	<refentry id="ST_SwapOrdinates">
	  <refnamediv>
		<refname>ST_SwapOrdinates</refname>
		<refpurpose>Returns a version of the given geometry with
				given ordinate values swapped.
    </refpurpose>
	  </refnamediv>

	  <refsynopsisdiv>
		<funcsynopsis>
		  <funcprototype>
			<funcdef>geometry <function>ST_SwapOrdinates</function></funcdef>
			<paramdef><type>geometry</type> <parameter>geom</parameter></paramdef>
			<paramdef><type>cstring</type> <parameter>ords</parameter></paramdef>
		  </funcprototype>
		</funcsynopsis>
	  </refsynopsisdiv>

	  <refsection>
		<title>Description</title>
		<para>
Returns a version of the given geometry with given ordinates swapped.
    </para>
		<para>
The <varname>ords</varname> parameter is a 2-characters string naming
the ordinates to swap. Valid names are: x,y,z and m.
    </para>
		<para>Availability: 2.2.0</para>
		<para>&curve_support;</para>
		<para>&Z_support;</para>
		<para>&M_support;</para>
		<para>&P_support;</para>
		<para>&T_support;</para>
	  </refsection>

	  <refsection>
		<title>Example</title>
		<programlisting><![CDATA[
-- Scale M value by 2
SELECT ST_AsText(
  ST_SwapOrdinates(
    ST_Scale(
      ST_SwapOrdinates(g,'xm'),
      2, 1
    ),
  'xm')
) FROM ( SELECT 'POINT ZM (0 0 0 2)'::geometry g ) foo;
     st_astext
--------------------
 POINT ZM (0 0 0 4)
		 ]]></programlisting>
	  </refsection>

	  <!-- Optionally add a "See Also" section -->
	  <refsection>
		<title>See Also</title>
		<para> <xref linkend="ST_FlipCoordinates" /> </para>
	  </refsection>

	</refentry>

  </sect1>