What was new in ppp-2.3.11.
* Support for Solaris 8 has been added, including support for
replumbing and IPV6.
* The Solaris `snoop' utility should now work on ppp interfaces.
* New hooks have been added - pap_logout_hook, ip_up_hook, and
* A new `passprompt' plugin is included, thanks to Alan Curry, which
makes it possible for pppd to call an external program to get the
PAP password to send to the peer.
* The error messages for the situation where authentication is
required because the system has a default route have been improved.
* There is a new connect_delay option which specifies how long pppd
should pause after the connect script finishes. Previously this
delay was fixed at 1 second. (This delay terminates as soon as pppd
sees a valid PPP frame from the peer.)
* The `hide-password' option is now the default, and there is a new
`show-password' option to enable the printing of password strings in
the debug output.
* A fairly complete list of the names of PPP protocols has been added
so that when pppd rejects a frame because its protocol is not
supported, it can print the name of the unsupported protocol.
* Synchronous serial lines are supported under Linux 2.3.x.
* The bug where pppd would not recognize a modem hangup under Linux
2.3.x kernels has been fixed.
What was new in ppp-2.3.10.
* Pppd now supports `plugins', which are pieces of code (packaged as
shared libraries) which can be loaded into pppd at runtime and which
can affect its behaviour. The intention is that plugins provide a
way for people to customize the behaviour of pppd for their own
needs without needing to change the base pppd source. I have added
some hooks into pppd (places where pppd will call a function
pointer, if non-zero, to replace some of pppd's code) and I will be
receptive to suggestions about places to add more hooks. Plugins
are supported under Linux and Solaris at present.
* We have a new maintainer for the Solaris port, Adi Masputra of Sun
Microsystems, and he has updated the Solaris port so that it should
work on 64-bit machines under Solaris 7 and later.
* Pppd now has an `allow-ip' option, which takes an argument which is
an IP address (or subnet) which peers are permitted to use without
authenticating themselves. The argument takes the same form as each
element of the allowed IP address list in the secrets files. The
allow-ip option is privileged and may be specified multiple times.
Using the allow-ip option should be cleaner than putting a line like
`"" * "" address' in /etc/ppp/pap-secrets.
* Chat can now substitute environment variables into the script. This
is enabled by the -E flag. (Thanks to Andreas Arens for the patch.)
* If the PAP username and password from the peer contains unprintable
characters, they will be translated to a printable form before
looking in the pap-secrets file. Characters >= 0x80 are translated
to a M- form, and characters from 0 to 0x1f (and 0x7f as well) are
translated to a ^X form. If this change causes you grief, let me
know what would be a better translation. It appears that some peers
send nulls or other control characters in their usernames and
* Pppd has new `ktune' and `noktune' options, which enable/disable
it to change kernel settings as appropriate. This is only
implemented under Linux, and requires the /proc filesystem to be
mounted. Under Linux, with the ktune option, pppd will enable IP
forwarding in the kernel if the proxyarp option is used, and will
enable the dynamic IP address kernel option in demand mode if the
local IP address changes.
* Pppd no longer requires a remote address to be specified for demand
dialling. If none is specified, it will use a default value of
10.112.112.112+unit_number. (It will not propose this default to
* The default holdoff is now 0 if no connect script is given.
* The IPV6 code from Tommi Komulainen, which I unfortunately only
partially merged in to ppp-2.3.9, has been fixed and updated.
* The linux compilation glitches should be fixed now.
What was new in ppp-2.3.9.
* Support for the new generic PPP layer under development for the
* You can now place extra options to apply to specific users at the
end of the line with their password in the pap-secrets or
chap-secrets file, separated from the IP address(es) with a "--"
separator. These options are parsed after the peer is authenticated
but before network protocol (IPCP, IPXCP) or CCP negotiation
* Pppd will apply the holdoff period if the link was terminated by the
peer. It doesn't apply it if the link was terminated because the
local pppd thought it was idle.
* Synchronous support for Solaris has been added, thanks to John
Morrison, and for FreeBSD, thanks to Paul Fulghum.
* IPV6 support has been merged in, from Tommi Komulainen. At the
moment it only supports Linux and it is not tested by me.
* The `nodefaultip' option can be used in demand mode to say that pppd
should not suggest its local IP address to the peer.
* The `init' option has been added; this causes pppd to run a script
to initialize the serial device (e.g. by sending an init string to
the modem). Unlike the connect option, this can be used in a
dial-in situation. (Thanks to Tobias Ringstrom.)
* There is a new `logfile' option to send log messages to a file as
well as syslog.
* There is a new, privileged `linkname' option which sets a logical
name for the link. Pppd will create a /var/run/ppp-<linkname>.pid
file containing its process ID.
* There is a new `maxfail' option which specifies how many consecutive
failed connection attempts are permitted before pppd will exit. The
default value is 10, and 0 means infinity. :-)
* Sundry bugs fixed.
What was new in ppp-2.3.8.
* The exit status of pppd will now indicate whether the link was
successfully established, or if not, what error was encountered.
* Pppd has two new options: fdlog <n> will send log messages to file
descriptor <n> instead of standard output, and nofdlog will stop log
messages from being sent to any file descriptor (they will still be
sent to syslog). Pppd now will not send log messages to a file
descriptor if the serial port is open on that file descriptor.
* Pppd sets an environment variable called PPPLOGNAME for scripts that
it runs, indicating the login name of the user who invoked pppd.
* Pppd sets environment variables CONNECT_TIME, BYTES_SENT and
BYTES_RCVD for the ip-down and auth-down scripts indicating the
statistics for the connection just terminated. (CONNECT_TIME is in
* If the user has the serial device open on standard input and
specifies a symbolic link to the serial device on the command line,
pppd will detect this and behave correctly (i.e. not detach from its
controlling terminal). Furthermore, if the serial port is open for
reading and writing on standard input, pppd will assume that it is
locked by its invoker and not lock it itself.
* Chat now has a feature where if a string to be sent begins with an
at sign (@), the rest of the string is taken as the name of a file
(regular file or named pipe), and the actual string to send is taken
from that file.
* Support for FreeBSD-2.2.8 and 3.0 has been added, thanks to Paul
* The Tru64 (aka Digital Unix aka OSF/1) port has been updated.
* The system panics on Solaris SMP systems related to PPP connections
being established and terminated should no longer occur.
* Fixed quite a few bugs.
What was new in ppp-2.3.7.
* Pppd can now automatically allocate itself a pseudo-tty to use as
the serial device. This has made three new options possible:
- `pty script' will run `script' with its standard input and output
connected to the master side of the pty. For example:
pppd pty 'ssh -t server.my.net pppd'
is a basic command for setting up a PPP link (tunnel) over ssh.
(In practice you may need to specify other options such as IP
- `notty' tells pppd to communicate over its standard input and
output, which do not have to be a terminal device.
- `record filename' tells pppd to record all of the characters sent
and received over the serial device to a file called `filename'.
The data is recorded in a tagged format with timestamps, which can
be printed in a readable form with the pppdump program, which is
included in this distribution.
* Pppd now logs the connect time and number of bytes sent and received
(at the level of the serial device) when the connection is
* If you use the updetach or nodetach option, pppd will print its
messages to standard output as well as logging them with syslog
(provided of course pppd isn't using its standard input or output as
its serial device).
* There is a new `privgroup groupname' option (a privileged option).
If the user running pppd is in group `groupname', s/he can use
privileged options without restriction.
* There is a new `receive-all' option, which causes pppd to accept all
control characters, even the ones that the peer should be escaping
(i.e. the receive asyncmap is 0). This is useful with some buggy
* The default asyncmap is now 0.
* There is a new `sync' option, currently only implemented under
Linux, which allows pppd to run on synchronous HDLC devices.
* If a value for the device name or for the connect, disconnect,
welcome or pty option is given in a privileged option file
(i.e. /etc/ppp/options or a file loaded with the `call' option), it
cannot be overridden by a non-privileged user.
* Many bugs have been fixed, notably:
- signals are not blocked unnecessarily, as they were in 2.3.6.
- the usepeerdns option should work now.
- the SPEED environment variable for scripts is set correctly.
- the /etc/ppp/auth-down script is not run until auth-up completes.
- the device is opened as root if it is the device on standard
- pppd doesn't die with the ioctl(PPPIOCSASYNCMAP) error under linux
if a hangup occurs at the wrong time.
* Some error messages have been changed to be clearer (I hope :-)
What was new in ppp-2.3.6.
* Pppd now opens the tty device as the user (rather than as root) if
the device name was given by the user, i.e. on the command line or
in the ~/.ppprc file. If the device name was given in
/etc/ppp/options or in a file loaded with the `call' option, the
device is opened as root.
* The default behaviour of pppd is now to let a peer which has not
authenticated itself (e.g. your ISP) use any IP address to which the
system does not already have a route. (This is currently only
supported under Linux, Solaris and Digital Unix; on the other
systems, the peer must now authenticate itself unless the noauth
option is used.)
* Added new option `usepeerdns', thanks to Nick Walker
<firstname.lastname@example.org>. If the peer supplies DNS addresses, these
will be written to /etc/ppp/resolv.conf. The ip-up script can then
be used to add these addresses to /etc/resolv.conf if desired (see
the ip-up.local.add and ip-down.local.add files in the scripts
* The Solaris ppp driver should now work correctly on SMP systems.
* Minor corrections so that the code can compile under Solaris 7,
and under Linux with glibc-2.1.
* The Linux kernel driver has been restructured for improved
* Pppd now won't start the ip-down script until the ip-up script has
What was new in ppp-2.3.5.
* Minor corrections to the Digital UNIX and NetBSD ports.
* A workaround to avoid tickling a bug in the `se' serial port driver
on Sun PCI Ultra machines running Solaris.
* Fixed a bug in the negotiation of the Microsoft WINS server address
* Fixed a bug in the Linux port where it would fail for kernel
versions above 2.1.99.
What was new in ppp-2.3.4.
* The NeXT port has been updated, thanks to Steve Perkins.
* ppp-2.3.4 compiles and works under Solaris 2.6, using either gcc or
* With the Solaris, SVR4 and SunOS ports, you can control the choice
of C compiler, C compiler options, and installation directories by
editing the svr4/Makedefs or sunos4/Makedefs file.
* Until now, we have been using the number 24 to identify Deflate
compression in the CCP negotiations, which was the number in the draft
RFC describing Deflate. The number actually assigned to Deflate is
26. The code has been changed to use 26, but to allow the use of 24
for now for backwards compatibility. (This can be disabled with the
`nodeflatedraft' option to pppd.)
* Fixed some bugs in the linux driver and deflate compressor which
were causing compression problems, including corrupting long
incompressible packets sometimes.
* Fixes to the PAM and shadow password support in pppd, from Al
Longyear and others.
* Pppd now sets some environment variables for scripts it invokes
(ip-up/down, auth-ip/down), giving information about the connection.
The variables it sets are PEERNAME, IPLOCAL, IPREMOTE, UID, DEVICE,
SPEED, and IFNAME.
* Pppd now has an `updetach' option, which will cause it to detach
from its controlling terminal once the link has come up (i.e. once it
is available for IP traffic).
What was new in ppp-2.3.3.
* Fixed compilation problems under SunOS.
* Fixed a bug introduced into chat in 2.3.2, and compilation problems
introduced into the MS-CHAP implementation in 2.3.2.
* The linux kernel driver has been updated for recent 2.1-series
kernel changes, and it now will ask kerneld to load compression
modules when required, if the kernel is configured to support kerneld.
* Pppd should now compile correctly under linux on systems with glibc.
What was new in ppp-2.3.2.
* In 2.3.1, I made a change which was intended to make pppd able to
detect loss of CD during or immediately after the connection script
runs. Unfortunately, this had the side-effect that the connection
script wouldn't work at all on some systems. This change has been
* Fix compilation problems in the Linux kernel driver.
What was new in ppp-2.3.1.
* Enhancements to chat, thanks to Francis Demierre. Chat can now
accept comments in the chat script file, and has new SAY, HANGUP,
CLR_ABORT and CLR_REPORT keywords.
* Fixed a bug which causes 2.3.0 to crash Solaris systems.
* Bug-fixes and restructuring of the Linux kernel driver.
* The holdoff behaviour of pppd has been changed slightly: now, if
the link comes up for IP (or other network protocol) traffic, we
consider that the link has been successfully established, and don't
enforce the holdoff period after the link goes down.
* Pppd should now correctly wait for CD (carrier detect) from the
modem, even when the serial port initially had CLOCAL set, and it
should also detect loss of CD during or immediately after the
connection script runs.
* Under linux, pppd will work with older 2.2.0* version kernel
drivers, although demand-dialling is not supported with them.
* Minor bugfixes for pppd.
What was new in ppp-2.3.
* Demand-dialling. Pppd now has a mode where it will establish the
network interface immediately when it starts, but not actually bring
the link up until it sees some data to be sent. Look for the demand
option description in the pppd man page. Demand-dialling is not
supported under Ultrix or NeXTStep.
* Idle timeout. Pppd will optionally terminate the link if no data
packets are sent or received within a certain time interval.
* Pppd now runs the /etc/ppp/auth-up script, if it exists, when the
peer successfully authenticates itself, and /etc/ppp/auth-down when
the connection is subsequently terminated. This can be useful for
* A new packet compression scheme, Deflate, has been implemented.
This uses the same compression method as `gzip'. This method is free
of patent or copyright restrictions, and it achieves better
compression than BSD-Compress. It does consume more CPU cycles for
compression than BSD-Compress, but this shouldn't be a problem for
links running at 100kbit/s or less.
* There is no code in this distribution which is covered by Brad
Clements' restrictive copyright notice. The STREAMS modules for SunOS
and OSF/1 have been rewritten, based on the Solaris 2 modules, which
were written from scratch without any Clements code.
* Pppstats has been reworked to clean up the output format somewhat.
It also has a new -d option which displays data rate in kbyte/s for
those columns which would normally display bytes.
* Pppd options beginning with - or + have been renamed, e.g. -ip
became noip, +chap became require-chap, etc. The old options are
still accepted for compatibility but may be removed in future.
* Pppd now has some options (such as the new `noauth' option) which
can only be specified if it is being run by root, or in an
"privileged" options file: /etc/ppp/options or an options file in the
/etc/ppp/peers directory. There is a new "call" option to read
options from a file in /etc/ppp/peers, making it possible for non-root
users to make unauthenticated connections, but only to certain trusted
peers. My intention is to make the `auth' option the default in a
* Several minor new features have been added to pppd, including the
maxconnect and welcome options. Pppd will now terminate the
connection when there are no network control protocols running. The
allowed IP address(es) field in the secrets files can now specify
subnets (with a notation like 184.108.40.206/24) and addresses which are
not acceptable (put a ! on the front).
* Numerous bugs have been fixed (no doubt some have been introduced :-)
Thanks to those who reported bugs in ppp-2.2.