NEWS: what has changed recently with procps, in reverse cronological order.
Please send bug reports to procps-bugs@redhat.com


NEWS for version 1.2.7 of procps

Security hole in XConsole fixed.

Works better with very long uptimes.

Fixed RPM spec file to have correct libproc soname.

skill -i works.

Knows about more major numbers for smart serial boards.

Fixed some small problems in top.


NEWS for version 1.2.6 of procps

Signal handling in top fixed in several ways.  Main effect: suspending
works correctly with glibc now.

Patch from Linus for change in some kernel structures to 64-bit.
This means that libproc has changed soname, as the proc_t data
structure has changed incompatibly.

File descriptor leaks in libproc were fixed.


NEWS for version 1.2.5 of procps

Potential security hole fixed: if there was no /etc/psdevtab on
a system, a user could put a link from /tmp/psdevtab to a file
owned by another user, and when that other user ran ps, the
file it pointed to would be killed.  This wouldn't work for
root because root would be able to create /etc/psdevtab first,
so arbitrary system files would not be killable.  This was fixed
by avoiding psdevtab files that are symlinks or have link counts
higher than 1, and by not looking for /tmp/psdevtab anymore, as
the reason for it to exist is really obsolete.

w -s output has been fixed.  Scripts that depend on w -s output
should be examined.  The output was broken enough to warrant this
change; it was extremely buggy.


NEWS for version 1.2.4 of procps

I_WANT_A_BROKEN_PS environment variable turns off usage warning.

"w <username>" sense corrected.

argument order problem fixed.

XConsole doesn't dump core on exit any more (only fclose if the
file is open...)

NEWS for version 1.2.3 of procps

psupdate moved to /usr/sbin, since it is no longer necessary.

Added wmconfig for Red Hat systems (others can use it if they
want; if/when wmconfig becomes standard, I'll move it into the
install target of the makefile).

Ugly hack to get around a problem some people were getting with
a too-small variable.

The usage message no longer recommends a deprecated syntax.  :-)

NEWS for version 1.2.2 of procps

Made procps report its version number correctly.
Fixed typo in w.1 man page.

NEWS for version 1.2.1 of procps

New address for bug reports against procps: procps-bugs@redhat.com
(That's not an official service of Red Hat Software, just an alias
for me so that bugs get filed properly where I don't lose them...)

Better memory checks.
Fixed a file descriptor leak.
In top, the space key updates immediately.
Fixed broken signal code in top.
Fixed broken screen size calculations in top.
Fixed broken user count calculations in top.
Fixed broken time difference calculations in w.
Link libproc against libc explicitly for better co-existance with libc.

NEWS for version 1.2 of procps

Original author/maintainer, Michael K. Johnson <johnsonm@redhat.com>,
has taken over maintenance again.

psmisc removed, as it is better maintained separately.  xload removed,
as it is better maintained as part of XFree86.  mknewpty removed, as
it duplicates /dev/MAKEDEV and MAKEDEV is maintained.

Support for 2.1.x kernels and for glibc 2.0.5.

Lots of documentation updates.

BFD support and shared library enabled by default.

Binaries are no longer included in the archive -- get them from your
favorite Linux distributor.

free's display fixed in several ways: no such thing as cached swap,
buffer+ display was incorrectly calculated, and buffer calculations
didn't include cached memory.

Removed mknewpty, because it wasn't perfect and collides with MAKEDEV.

NEWS for version 1.01 of procps

top bugfix release.  Fixes memory leak, extra line after loadavg and broken
no-idle mode.  Also be a little more aggressive utmp 'from host' filtering in w.

NEWS for version 1.00 of procps

Fixed the ps -t without a -a segfault bug.  Royal screwup on my part.
Updated libproc parsing routine for the new vsize output as of 1.3.91-ish.
Expanded the room for the FLAGS in ps -l due to high order bits now being set.

Added a brand new top to the distribution.  Highly run-time configurable.  The
old top is available for at least a release or so as "top.old".  See the new man
page for details, or just run it and type 'h'.  This is courtesy of Helmut
Geyer.  Thanks Helmut!

egrep -n '\<(tgetent|cm|top_clrtoeol|top_clrtobot|cl|ho|me|md|mr|tgoto)\>' on
top.c and cleaned up all terminal strings being just dumped to stdout.  All such
strings are now tputs'd out with putchar.  This should fix a lot of problems
people have been having.

Also cleaned up non-HZ based references to jiffies -> real time conversion. I
may have missed one or two, though...

Cleaned up some Makefile things.  make distclean; make should really work now.
removed function pointer warnings in xcpustate.c.  .depend is properly removed
as are the imake generated makefiles.  Shared lib generation bug for libproc
fixed.  In general the build should be a lot cleaner, but may still have a glitch
or two.

Fixed a few (but probably not all) Alpha compatibility bugs dealing with memory
alignment.  Please let me know if I missed any, or if you like give me a test
account on some Alpha.  I don't have access to any Linux other than x86 which is
notoriously forgiving about unaligned memory accesses.  Thanks to Alfred Arnold
(a.arnold@kfa-juelich.de) and Harald Koenig for their help so far with this.

Completely (well almost) re-wrote 'w'.  From on by default, J/PCPU display is
accurate to 0.01s.  w and top use readproc, so snap.c has gone away completely.

'skill' should actually work now, but you may have to use '-c', '-u', etc. to
actually get it to parse the command line correctly.

*** Significant changes in psdevtab inverse device name resolution
------------------------------------------------------------------
Extended semantics of the -n (numeric) option to output the full device number
in hexadecimal for the tty field.  That way if /etc/psdevtab cannot be created
rescanning the /dev directory can be short-circuited.  Fixed incorrect file
creation mode for /etc/psdevtab.  I just forgot to alter my original 0 mode to
something reasonable like 0664.  Added fallback locations for psdevtab.  First
it tries /etc/psdevtab, then /tmp/psdevtab and then $HOME/.psdevtab.  Also,
decided to go ahead and create the devtab file with regular old write instead of
the rw mmap.  I still read it with mmap, but there should be no trouble with
that even in ancient kernels.  Also changed the semantics such that if any
devtab file is found, it is assumed to be correct regardless of the relative
timestamps of /dev and the file.  Hopefully all this will avoid any unnecessary
slowness.  I'm still willing to reactivate the older somewhat broken code to
do the mapping without any file as a fallback if the file doesn't exist.

*** Significant changes in psdatabase/WCHAN inverse name resolution
-------------------------------------------------------------------
libproc reads directly from System.map, so psupdate and /etc/psdatabase are no
longer necessary.  Hopefully this will make kernel configuration management
simpler requiring only the zImage and System.map, which being the stripped
(compressed) kernel and the symbol table before stripping are natural
complements.  This is probably how things should have been all along even going
back to kmem ps days four years ago.  Oh well. This change should make dealing
with x86, AXP, Sparc, etc binary formats for kernels a lot easier.  All that is
required of System.map is that there be exactly 3 space delimited columns:
   "address[single space]anything_with_no_spaces[single space]symbol[newline]"
[ Well, ok, the addresses have to be zero padded so that lexicographic order is
the same as numerical order and the addresses all have to be the same ascii
length and I haven't tested to see how resilient it is to bogus internal records
like multiple newlines in a row.  Hopefully aren't editting and commenting their
System.map files. ;-)  This could actually work on "sort < /proc/ksyms" also if
we generalize the behavior to work with either two or three columns. ]

We take advantage of the following files in this order:
    PS_SYSTEM_MAP                 # may only point to System.map, not psdatabase
    /boot/System.map-`uname -r`,  # Note: this is the preferred path
    /boot/System.map
    /lib/modules/`uname -r`/System.map
    /etc/psdatabase
    /boot/psdatabase-`uname -r`,
    /boot/psdatabase,
    /lib/modules/`uname -r`/psdatabase

The reason for the /lib/modules/*/file location is that I imagine many people
have enough trouble keeping track of kernel version-dependent files in the
filesystem as it is, so I didn't want to invent a new place.  I keep things in
/boot myself and don't usually have more than 8 or so kernel versions, so this
works for me.  I know not everyone uses modules, but it's just a search path
folks...  In case it isn't obvious from all of the above, this means that
psupdate is no longer necessary.  I include it in this release and include
recognition of it because I realize that some distributions may have scripts
which depend on the old semantics.  I doubt there will ever be a compelling
reason to not include support for generating or reading the old psdatabase
files, but they aren't necessary anymore if you have the System.map files from
the kernel builds.

I'm not 100% sold on the ordering of the search path, but I think it makes
sense.  If you have reasons why it should be different I may be convincable.
Also I'm interested in exactly what the output of 'nm' looks like on Alpha,
Sparc, etc., architectures.  It should be easy enough to adapt the code if it is
basically the same format of <0 padded hex> ... <symbol>\n.

Thanks to Helmut Geyer for the idea of living off the System.map file natively
and Mike Dean for the idea of using an approximate binary search instead of
padding out the lines of System.map with tons of spaces to get equal record
lengths.  The cost of doing it approximately is mild, mostly consisting of lots
of scans to get to the next or last newline and a logarithmically few extra
steps to get to the desired record.  Only an order of magnitude guess for the
record length is necessary.  The code is all mine, though, so all bugs are due
to me alone.

NEWS for version 0.99a of procps
================================
This is a quick bug-fix release to solve a few thorny problems with my probably
overzealous attempt to use the inline-assembly string.h and a Makefile bug or
two.  It also fixes free to +/- the cached column too and makes it ignore the
new extra-pretty non-numeric lines that /proc/meminfo is spitting out.  It also
fixes the lack of set_linux_verion() in 'w' that caused no command line to be
displayed.  I am still working on a much condensed 'w' that should be a lot
easier to maintain and a readproctree that should be usable by both 'ps',
'pstree', and 'w'.

Apparently memory-mapped files are pretty broken before the early 1.3.X kernels
so I may have to rewrite devname.c to not use MAP_WRITE to create psdevtab. Some
people have been claiming that /dev changes at boot-up in some rc scripts. I'm
not really sure why they would want to do that.  Seems kind of paranoid to
continually re-make /dev/log.  Anyhow, I'm open to suggestions for psdevtab
behaviors.  I've been thinking a /tmp/psdevtab fallback (with a careful world
readable umask to avoid repetition) or maybe a $HOME/.psdevtab fallback too.

NEWS for version 0.99 of procps
===============================
This file is a brief catalog of new features or developments in the package.
For general information about using the programs see their man pages.

NEW PACKAGES OR PROGRAMS
========================

LIBPROC
    I've modularized some routines and fixed some long standing bugs.  Replaced
    the regex() recognition of /proc/PID with a simple check of the first
    character of the filename being a digit which should be just as safe.

    Added an opendir/readdir/closedir style interface to the process table.  The
    new interface seems cleaner, more intuitive and generally more applicable
    (to me anyway).  The only program which uses the new interface is ps.  'w'
    will follow soon.  'top' may take a while longer...  openproc,readproc, and
    closeproc are implemented.  I still want to do readproctab and rewindproc,
    too though.

    Added some kernel and package versioning things to make it easier to be run
    time adaptable.  Also updated sysinfo to understand any /proc/meminfo.  A
    /proc/stat parser should probably be in there as well with the appropriate
    updates to vmstat and xcpustate.

    The general direction procps should move in is lightweight command-line or
    X11/Motif display/format programs and compartmentalized libproc routines to
    parse all of the /proc files.  This isolates the utilities from kernel
    versioning.

TTY DEVICE NUMBER TO NAME RESOLUTION
    Tty device name <-> number mapping has been completely generalized.  It now
    stat's every character special file in /dev and builds a memory mapped table
    of device names indexed in a way that makes lookup of name from number a
    fast, constant time process.  The extra overhead incurred by building
    /etc/psdevtab is non-negligible if you have a large /dev and permissions to
    write the file (or its directory) are required to update the file (which is
    done if it does not exist or if /dev is newer than /etc/psdevtab).

    Hence `root' should `ps' shortly after any modification to /dev (or chmod
    666 /etc/psdevtab :-) to avoid ordinary users rebuilding it over and over.
    Since such modifications are rare, hopefully having a fallback $HOME
    location will not be necessary.  If the file is up to date, the overhead
    incurred is very small.  The generality bought is essentially optimal since
    `ps' tailors its notion of name<->devno mapping according to the /dev of the
    local system which is the canonical repository of this information.

    In principle the name database could encompass all device majors. The file
    would be large, but since I use mmap to access it, only the pages with the
    major of interest are ever actually read off the disk.  Right now I just use
    the majors 2,3,4,5,19,20 which should cover both old and new systems with
    both master and slave devices (I know... no reason for the masters... :-)
    and the multiport serial devices.  Also the 'mknewpty' script is provided
    to update your /dev directory to the new pty master/slave devices.

    The tty abbreviation scheme has been rationalized to match device special
    files.  The leading "tty" or "cu" is stripped, so cua3 -> a3, tty1 -> 1 and
    ttyp9 -> p9.  The t flag in ps now works with a full device names and to
    pick up processes even if they aren't owned by the owner of ps, e.g.
    "ps tcua0" picks up gpm for everyone.  This seems desirable.

WATCH
    A little program similar to another called 'vis' which simply re-displays
    in a polling fashion the output of other programs.  "watch ps --sort:utime"
    might be dubbed a poor man's 'top'.  Though this has been included in procps
    for some time it hasn't been built or installed by default.  It is now.

SKILL/SNICE
    I have written the necessary machine-dependant file for 'skill' and tested
    it somewhat under Linux.  It seems to mostly work, but there are probably a
    few glitches.  This is a generalization of the 'killall' concept.  You can
    send signals or change priority based upon user, command basename (the same
    that 'ps c' gives), terminal, etc.  If you have a user named 'satan' "skill
    -u satan" will kill all their processes. :-) See the man page for more
    details.

    An annoyance of the current implementation is that although permission to
    send signals is based upon the real user id, /proc only gives the effective
    uids of processes.  Hence processes which you *could* kill because they're
    suid-root (X say) won't be detected as kill-able.  Either /proc + readproc
    need to be updated to report the *real* uid to skil or skill needs to try to
    send the signal even if the uid doesn't match.

XCPUSTATE
    This is basicly a unified memory/cpu/network monitor program courtesy of
    Andy Burgess (aab@cichlid.com).  It shows four bars in a window with the
    current usage of various system resources.

PSMISC PROGRAMS
    See the files under psmisc. These files apply to killall, pstree, fuser.
    The version included here is 0.11.  I accidentally put the 0.9 version in
    an unadvertised stealth 0.98 release.  Sorry Werner :-)

CHANGES TO OLD PROGRAMS
=======================

MAKEFILE
    The directory hierarchy has been restructured.  It is now easier to have the
    multiple components to the suite under nearly autonomous administration.
    The library code has also been moved to a subdirectory.  The best thing
    about the new setup is that things like Imake generated Makefiles with
    preconceived notions of 'make install' can be used without getting into the
    business of re-writing component package makefiles.

    There is now an option to build a shared libproc.a which reduces 'ps' and
    'top' sizes by about 10K apiece.  Simply change the value of SHARED.  Also,
    one may optionally install the library header files and archive/shared
    object files into standard system directories.  There are no library man
    pages yet, but the headers are fairly descriptive.

PS
    Several long standing bugs have been fixed and much of the internal code was
    re-written to use my new directory-style interface to the process table.  In
    particular if sorting is disabled (with '-o') the process entries are output
    to the terminal as soon as possible (making it more helpful under heavy
    system load).

    I am considering several new additional features to `ps' including
        regex filtering of which processes to list,
        "grep -s" silent testing for existing of processes matching criteria,
        run-time/user-defined output formats.
    I would also like to completely phase the w,top code which uses the snapshot
    interface instead of the 'readproc' interface.  And of course adding long
    options for the rest of the options would be nice too (I may not get around
    to doing this anytime really soon so patches which implement any of these
    things would most likely be gleefully accepted).

PSUPDATE
    psupdate has been updated to work with ELF kernels.  If you compile it as
    an ELF binary it will handle both a.out and ELF kernels.  If you compile it
    as an a.out binary it will only handle a.out kernels.  Many thanks to Jeff
    Uphoff.

    psupdate has also been updated to work with any binary type supported
    by libbfd.  This is the default configuration.
    Many thanks to David Mossberger-Tang.

TOP
    A user-defined format would be nice here too.  Alternate sorting criteria
    (top memory users instead of top CPU users, etc.) may be another interesting
    alternative.  Of course the sorting in ps can do all of that, but it doesn't
    have any optimal screen update action going down... :-)