1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
|
function err=DaqDConfigPortBit(daq,BitNumber,direction)
% err=DaqDConfigPortBit(DeviceIndex,BitNumber,direction)
% USB-1608FS: Configure digital port. This command sets the direction of
% the DIO port to input or output.
% "DeviceIndex" is a small integer, the array index specifying which HID
% device in the array returned by PsychHID('Devices') is interface 0
% of the desired USB-1208FS box.
% "BitNumber" ranges from 0:7 and can be a vector if you want to configure
% multiple ports at the same time.
% "direction" 0 = output, 1 = input; must be either a scalar or a vector of the
% same length as BitNumber
% See also Daq, DaqFunctions, DaqPins, DaqTest, PsychHIDTest, DaqDReadBit,
% DaqDWriteBit, DaqDConfigPort, DaqDIn, DaqDOut.
%
% ******************************************************************************
% * *
% * If your Daq is a USB-1208FS or USB-1408FS, this code has not been tested *
% * probably will not run on your device. The USB-1608FS has only one DIO *
% * port and that is what this code was written to expect. To make it run on *
% * a 12 or 14 bit device, you should fix this to take an additional input *
% * (the portnumber) and to continue to behave as is for the 16-bit device. *
% * An example of how to do that can be found in DaqDConfigPort. -- mpr *
% * *
% ******************************************************************************
%
% Code has not been tested on USB-1208FS or USB-1408FS. If you have one of
% those devices, you should modify this code to accept portnumber as an
% additional input parameter. See DaqDConfigPort for an example of how to deal
% with the added input.
%
% 12/17/07 mpr scavenged and modified code from DaqDConfigPort
% 1/11/08 mpr swept through trying to improve consistency across daq
% functions
if length(BitNumber) > 1
if numel(direction) == 1
direction = direction*ones(size(BitNumber));
end
if ~all(size(BitNumber) == size(direction))
error('Dimension mismatch; direction must be either scalar or vector of same length as BitNumber');
end
for k=1:length(BitNumber)
err(k) = DaqDConfigPortBit(daq,BitNumber(k),direction(k));
end
return;
end
if ~ismember(direction,0:1)
error('"direction" must be 0 (out) or 1 (in).');
end
report=uint8([2 BitNumber direction]);
err=PsychHID('SetReport',daq,2,2,report); % Configure digital port bit.
if err.n
fprintf('DaqDConfigPortBit error 0x%s. %s: %s\n',hexstr(err.n),err.name,err.description);
end
return
|
