File: puttydoc.txt

package info (click to toggle)
putty 0.83-3
links: PTS, VCS
area: main
in suites: forky, sid, trixie
size: 13,216 kB
sloc: ansic: 148,476; python: 8,466; perl: 1,830; makefile: 128; sh: 117
file content (12881 lines) | stat: -rw-r--r-- 619,636 bytes
                             PuTTY User Manual
                             =================

PuTTY is a free (MIT-licensed) Windows Telnet and SSH client. This manual
documents PuTTY, and its companion utilities PSCP, PSFTP, Plink, Pageant
and PuTTYgen.

_Note to Unix users:_ this manual currently primarily documents the Windows
versions of the PuTTY utilities. Some options are therefore mentioned
that are absent from the Unix version; the Unix version has features
not described here; and the pterm and command-line puttygen and pageant
utilities are not described at all. The only Unix-specific documentation
that currently exists is the man pages.

This manual is copyright 1997-2025 Simon Tatham. All rights reserved. You
may distribute this documentation under the MIT licence. See appendix D for
the licence text in full.

Chapter 1: Introduction to PuTTY
--------------------------------

       PuTTY is a free SSH, Telnet, Rlogin, and SUPDUP client for Windows
       systems.

   1.1 What are SSH, Telnet, Rlogin, and SUPDUP?

       If you already know what SSH, Telnet, Rlogin, and SUPDUP are, you
       can safely skip on to the next section.

       SSH, Telnet, Rlogin, and SUPDUP are four ways of doing the same
       thing: logging in to a multi-user computer from another computer,
       over a network.

       Multi-user operating systems, typically of the Unix family (such
       as Linux, MacOS, and the BSD family), usually present a command-
       line interface to the user, much like the `Command Prompt' or `MS-
       DOS Prompt' in Windows. The system prints a prompt, and you type
       commands which the system will obey.

       Using this type of interface, there is no need for you to be sitting
       at the same machine you are typing commands to. The commands,
       and responses, can be sent over a network, so you can sit at one
       computer and give commands to another one, or even to more than one.

       SSH, Telnet, Rlogin, and SUPDUP are _network protocols_ that allow
       you to do this. On the computer you sit at, you run a _client_,
       which makes a network connection to the other computer (the
       _server_). The network connection carries your keystrokes and
       commands from the client to the server, and carries the server's
       responses back to you.

       These protocols can also be used for other types of keyboard-based
       interactive session. In particular, there are a lot of bulletin
       boards, talker systems and MUDs (Multi-User Dungeons) which support
       access using Telnet. There are even a few that support SSH.

       You might want to use SSH, Telnet, Rlogin, or SUPDUP if:

        -  you have an account on a Unix system (or some other multi-user
           OS such as VMS or ITS) which you want to be able to access from
           somewhere else

        -  your Internet Service Provider provides you with a login account
           on a web server. (This might also be known as a _shell account_.
           A _shell_ is the program that runs on the server and interprets
           your commands for you.)

        -  you want to use a bulletin board system, talker or MUD which can
           be accessed using Telnet.

       You probably do _not_ want to use SSH, Telnet, Rlogin, or SUPDUP if:

        -  you only use Windows. Windows computers have their own ways
           of networking between themselves, and unless you are doing
           something fairly unusual, you will not need to use any of these
           remote login protocols.

   1.2 How do SSH, Telnet, Rlogin, and SUPDUP differ?

       This list summarises some of the differences between SSH, Telnet,
       Rlogin, and SUPDUP.

        -  SSH (which stands for `secure shell') is a recently designed,
           high-security protocol. It uses strong cryptography to protect
           your connection against eavesdropping, hijacking and other
           attacks. Telnet, Rlogin, and SUPDUP are all older protocols
           offering minimal security.

        -  SSH and Rlogin both allow you to log in to the server without
           having to type a password. (Rlogin's method of doing this is
           insecure, and can allow an attacker to access your account on
           the server. SSH's method is much more secure, and typically
           breaking the security requires the attacker to have gained
           access to your actual client machine.)

        -  SSH allows you to connect to the server and automatically send
           a command, so that the server will run that command and then
           disconnect. So you can use it in automated processing.

       The Internet is a hostile environment and security is everybody's
       responsibility. If you are connecting across the open Internet,
       then we recommend you use SSH. If the server you want to connect
       to doesn't support SSH, it might be worth trying to persuade the
       administrator to install it.

       If your client and server are both behind the same (good) firewall,
       it is more likely to be safe to use Telnet, Rlogin, or SUPDUP, but
       we still recommend you use SSH.

Chapter 2: Getting started with PuTTY
-------------------------------------

       This chapter gives a quick guide to the simplest types of
       interactive login session using PuTTY.

   2.1 Starting a session

       When you start PuTTY, you will see a dialog box. This dialog box
       allows you to control everything PuTTY can do. See chapter 4 for
       details of all the things you can control.

       You don't usually need to change most of the configuration options.
       To start the simplest kind of session, all you need to do is to
       enter a few basic parameters.

       In the `Host Name' box, enter the Internet host name of the server
       you want to connect to. You should have been told this by the
       provider of your login account.

       Now select a login protocol to use, from the `Connection type'
       controls. For a login session, you should select SSH, Telnet,
       Rlogin, or SUPDUP. See section 1.2 for a description of the
       differences between these protocols, and advice on which one to use.
       The _Raw_ protocol is not used for interactive login sessions; you
       would usually use this for debugging other Internet services (see
       section 3.7). The _Serial_ option is used for connecting to a local
       serial line, and works somewhat differently: see section 3.6 for
       more information on this.

       When you change the selected protocol, the number in the `Port'
       box will change. This is normal: it happens because the various
       login services are usually provided on different network ports
       by the server machine. Most servers will use the standard port
       numbers, so you will not need to change the port setting. If your
       server provides login services on a non-standard port, your system
       administrator should have told you which one. (For example, many
       MUDs run Telnet service on a port other than 23.)

       Once you have filled in the `Host Name', `Connection type', and
       possibly `Port' settings, you are ready to connect. Press the `Open'
       button at the bottom of the dialog box, and PuTTY will begin trying
       to connect you to the server.

   2.2 Verifying the host key (SSH only)

       If you are not using the SSH protocol, you can skip this section.

       If you are using SSH to connect to a server for the first time, you
       will probably see a message looking something like this:

         The host key is not cached for this server:
          ssh.example.com (port 22)
         You have no guarantee that the server is the computer you think it is.
         The server's ssh-ed25519 key fingerprint is:
          ssh-ed25519 255 SHA256:TddlQk20DVs4LRcAsIfDN9pInKpY06D+h4kSHwWAj4w
         If you trust this host, press "Accept" to add the key to PuTTY's
         cache and carry on connecting.
         If you want to carry on connecting just once, without adding the key
         to the cache, press "Connect Once".
         If you do not trust this host, press "Cancel" to abandon the connection.

       This is a feature of the SSH protocol. It is designed to protect you
       against a network attack known as _spoofing_: secretly redirecting
       your connection to a different computer, so that you send your
       password to the wrong machine. Using this technique, an attacker
       would be able to learn the password that guards your login account,
       and could then log in as if they were you and use the account for
       their own purposes.

       To prevent this attack, each server has a unique identifying code,
       called a _host key_. These keys are created in a way that prevents
       one server from forging another server's key. So if you connect to a
       server and it sends you a different host key from the one you were
       expecting, PuTTY can warn you that the server may have been switched
       and that a spoofing attack might be in progress.

       PuTTY records the host key for each server you connect to, in the
       Windows Registry. Every time you connect to a server, it checks that
       the host key presented by the server is the same host key as it was
       the last time you connected. If it is not, you will see a stronger
       warning, and you will have the chance to abandon your connection
       before you type any private information (such as a password) into
       it. (See section 10.2 for what that looks like.)

       However, when you connect to a server you have not connected to
       before, PuTTY has no way of telling whether the host key is the
       right one or not. So it gives the warning shown above, and asks you
       whether you want to trust this host key or not.

       Whether or not to trust the host key is your choice. If you are
       connecting within a company network, you might feel that all
       the network users are on the same side and spoofing attacks are
       unlikely, so you might choose to trust the key without checking
       it. If you are connecting across a hostile network (such as the
       Internet), you should check with your system administrator, perhaps
       by telephone or in person. (When verifying the fingerprint, be
       careful with letters and numbers that can be confused with each
       other: `0'/`O', `1'/`I'/`l', and so on.)

       Many servers have more than one host key. If the system
       administrator sends you more than one fingerprint, you should make
       sure the one PuTTY shows you is on the list, but it doesn't matter
       which one it is.

       If you don't have any fingerprints that look like the example
       (`SHA256:' followed by a long string of characters), but instead
       have pairs of characters separated by colons like `a4:db:96:a7:...',
       try pressing the `More info...' button and see if you have a
       fingerprint matching the `MD5 fingerprint' there. This is an older
       and less secure way to summarise the same underlying host key; it's
       possible for an attacker to create their own host key with the same
       fingerprint; so you should avoid relying on this fingerprint format
       unless you have no choice. The `More info...' dialog box also shows
       the full host public key, in case that is easier to compare than a
       fingerprint.

       See section 4.19 for advanced options for managing host keys.

   2.3 Logging in

       After you have connected, and perhaps verified the server's host
       key, you will be asked to log in, probably using a username and a
       password. Your system administrator should have provided you with
       these. (If, instead, your system administrator has asked you to
       provide, or provided you with, a `public key' or `key file', see
       chapter 8.)

       PuTTY will display a text window (the `terminal window' - it will
       have a black background unless you've changed the defaults), and
       prompt you to type your username and password into that window.
       (These prompts will include the PuTTY icon, to distinguish them from
       any text sent by the server in the same window.)

       Enter the username and the password, and the server should grant you
       access and begin your session. If you have mistyped your password,
       most servers will give you several chances to get it right.

       While you are typing your password, you will not usually see the
       cursor moving in the window, but PuTTY _is_ registering what you
       type, and will send it when you press Return. (It works this way to
       avoid revealing the length of your password to anyone watching your
       screen.)

       If you are using SSH, be careful not to type your username wrongly,
       because you will not have a chance to correct it after you press
       Return; many SSH servers do not permit you to make two login
       attempts using different usernames. If you type your username
       wrongly, you must close PuTTY and start again.

       If your password is refused but you are sure you have typed it
       correctly, check that Caps Lock is not enabled. Many login servers,
       particularly Unix computers, treat upper case and lower case as
       different when checking your password; so if Caps Lock is on, your
       password will probably be refused.

   2.4 After logging in

       After you log in to the server, what happens next is up to the
       server! Most servers will print some sort of login message and then
       present a prompt, at which you can type commands which the server
       will carry out. Some servers will offer you on-line help; others
       might not. If you are in doubt about what to do next, consult your
       system administrator.

   2.5 Logging out

       When you have finished your session, you should log out by typing
       the server's own logout command. This might vary between servers; if
       in doubt, try `logout' or `exit', or consult a manual or your system
       administrator. When the server processes your logout command, the
       PuTTY window should close itself automatically.

       You _can_ close a PuTTY session using the Close button in the window
       border, but this might confuse the server - a bit like hanging up a
       telephone unexpectedly in the middle of a conversation. We recommend
       you do not do this unless the server has stopped responding to you
       and you cannot close the window any other way.

Chapter 3: Using PuTTY
----------------------

       This chapter provides a general introduction to some more advanced
       features of PuTTY. For extreme detail and reference purposes,
       chapter 4 is likely to contain more information.

   3.1 During your session

       A lot of PuTTY's complexity and features are in the configuration
       panel. Once you have worked your way through that and started
       a session, things should be reasonably simple after that.
       Nevertheless, there are a few more useful features available.

 3.1.1 Copying and pasting text

       Often in a PuTTY session you will find text on your terminal screen
       which you want to type in again. Like most other terminal emulators,
       PuTTY allows you to copy and paste the text rather than having to
       type it again. Also, copy and paste uses the Windows clipboard, so
       that you can paste (for example) URLs into a web browser, or paste
       from a word processor or spreadsheet into your terminal session.

       By default, PuTTY's copy and paste works entirely with the mouse.
       (This will be familiar to people who have used `xterm' on Unix.) In
       order to copy text to the clipboard, you just click the left mouse
       button in the terminal window, and drag to select text. When you
       let go of the button, the text is _automatically_ copied to the
       clipboard. You do not need to press Ctrl-C or Ctrl-Ins; in fact, if
       you do press Ctrl-C, PuTTY will send a Ctrl-C character down your
       session to the server where it will probably cause a process to be
       interrupted.

       Pasting into PuTTY is done using the right button (or the middle
       mouse button, if you have a three-button mouse and have set it up;
       see section 4.11.1). (Pressing Shift-Ins, or selecting `Paste' from
       the Ctrl+right-click context menu, have the same effect.) When you
       click the right mouse button, PuTTY will read whatever is in the
       Windows clipboard and paste it into your session. By default, this
       behaves _exactly_ as if the clipboard contents had been typed at
       the keyboard; therefore, be careful of pasting formatted text into
       an editor that does automatic indenting, as you may find that the
       spaces pasted from the clipboard plus the spaces added by the editor
       add up to too many spaces and ruin the formatting. (Some remote
       applications can ask PuTTY to identify text that is being pasted, to
       avoid this sort of problem; but if your application does not, there
       is nothing PuTTY can do to avoid this.)

       If you double-click the left mouse button, PuTTY will select a whole
       word. If you double-click, hold down the second click, and drag the
       mouse, PuTTY will select a sequence of whole words. (You can adjust
       precisely what PuTTY considers to be part of a word; see section
       4.12.1.) If you _triple_-click, or triple-click and drag, then PuTTY
       will select a whole line or sequence of lines.

       If you want to select a rectangular region instead of selecting to
       the end of each line, you can do this by holding down Alt when you
       make your selection. You can also configure rectangular selection to
       be the default, and then holding down Alt gives the normal behaviour
       instead: see section 4.11.3 for details.

       (In some Unix environments, Alt+drag is intercepted by the window
       manager. Shift+Alt+drag should work for rectangular selection as
       well, so you could try that instead.)

       If you have a middle mouse button, then you can use it to adjust an
       existing selection if you selected something slightly wrong. (If you
       have configured the middle mouse button to paste, then the right
       mouse button does this instead.) Click the button on the screen,
       and you can pick up the nearest end of the selection and drag it to
       somewhere else.

       If you are running PuTTY itself on Unix (not just using it to
       connect to a Unix system from Windows), by default you will likely
       have to use similar mouse actions in other applications to paste the
       text you copied from PuTTY, and to copy text for pasting into PuTTY;
       actions like Ctrl-C and Ctrl-V will likely not behave as you expect.
       Section 4.11.4 explains why this is, and how you can change the
       behaviour. (On Windows there is only a single selection shared with
       other applications, so this confusion does not arise.)

       It's possible for the server to ask to handle mouse clicks in the
       PuTTY window itself. If this happens, the mouse pointer will turn
       into an arrow, and using the mouse to copy and paste will only work
       if you hold down Shift. See section 4.6.2 and section 4.11.2 for
       details of this feature and how to configure it.

       You can customise much of this behaviour, for instance to enable
       copy and paste from the keyboard; see section 4.11.

 3.1.2 Scrolling the screen back

       PuTTY keeps track of text that has scrolled up off the top of the
       terminal. So if something appears on the screen that you want to
       read, but it scrolls too fast and it's gone by the time you try to
       look for it, you can use the scrollbar on the right side of the
       window to look back up the session history and find it again.

       As well as using the scrollbar, you can also page the scrollback up
       and down by pressing Shift-PgUp and Shift-PgDn. You can scroll a
       line at a time using Ctrl-PgUp and Ctrl-PgDn, or to the top/bottom
       of the scrollback with Ctrl-Shift-PgUp and Ctrl-Shift-PgDn. These
       are still available if you configure the scrollbar to be invisible.

       By default the last 2000 lines scrolled off the top are preserved
       for you to look at. You can increase (or decrease) this value using
       the configuration box; see section 4.7.3.

 3.1.3 The System menu

       If you click the left mouse button on the icon in the top left
       corner of PuTTY's terminal window, or click the right mouse button
       on the title bar, you will see the standard Windows system menu
       containing items like Minimise, Move, Size and Close.

       PuTTY's system menu contains extra program features in addition
       to the Windows standard options. These extra menu commands are
       described below.

       (These options are also available in a context menu brought up by
       holding Ctrl and clicking with the right mouse button anywhere in
       the PuTTY window.)

3.1.3.1 The PuTTY Event Log

       If you choose `Event Log' from the system menu, a small window will
       pop up in which PuTTY logs significant events during the connection.
       Most of the events in the log will probably take place during
       session startup, but a few can occur at any point in the session,
       and one or two occur right at the end.

       You can use the mouse to select one or more lines of the Event Log,
       and hit the Copy button to copy them to the clipboard. If you are
       reporting a bug, it's often useful to paste the contents of the
       Event Log into your bug report.

       (The Event Log is not the same as the facility to create a log file
       of your session; that's described in section 3.2.)

3.1.3.2 Special commands

       Depending on the protocol used for the current session, there may
       be a submenu of `special commands'. These are protocol-specific
       tokens, such as a `break' signal, that can be sent down a connection
       in addition to normal data. Their precise effect is usually up to
       the server. Currently only Telnet, SSH, and serial connections have
       special commands.

       The `break' signal can also be invoked from the keyboard with Ctrl-
       Break.

       In an SSH connection, the following special commands are available:

        -  IGNORE message

           Should have no effect.

        -  Repeat key exchange

           Only available in SSH-2. Forces a repeat key exchange
           immediately (and resets associated timers and counters). For
           more information about repeat key exchanges, see section 4.18.2.

        -  Cache new host key type

           Only available in SSH-2. This submenu appears only if the server
           has host keys of a type that PuTTY doesn't already have cached,
           and so won't consider. Selecting a key here will allow PuTTY
           to use that key now and in future: PuTTY will do a fresh key-
           exchange with the selected key, and immediately add that key to
           its permanent cache (relying on the host key used at the start
           of the connection to cross-certify the new key). That key will
           be used for the rest of the current session; it may not actually
           be used for future sessions, depending on your preferences (see
           section 4.19.1).

           Normally, PuTTY will carry on using a host key it already knows,
           even if the server offers key formats that PuTTY would otherwise
           prefer, to avoid host key prompts. As a result, if you've been
           using a server for some years, you may still be using an older
           key than a new user would use, due to server upgrades in the
           meantime. The SSH protocol unfortunately does not have organised
           facilities for host key migration and rollover, but this allows
           you to manually upgrade.

        -  Break

           Only available in SSH-2, and only during a session. Optional
           extension; may not be supported by server. PuTTY requests the
           server's default break length.

        -  Signals (SIGINT, SIGTERM etc)

           Only available in SSH-2, and only during a session. Sends
           various POSIX signals. Not honoured by all servers.

       The following special commands are available in Telnet:

        -  Are You There

        -  Break

        -  Synch

        -  Erase Character

           PuTTY can also be configured to send this when the Backspace key
           is pressed; see section 4.30.3.

        -  Erase Line

        -  Go Ahead

        -  No Operation

           Should have no effect.

        -  Abort Process

        -  Abort Output

        -  Interrupt Process

           PuTTY can also be configured to send this when Ctrl-C is typed;
           see section 4.30.3.

        -  Suspend Process

           PuTTY can also be configured to send this when Ctrl-Z is typed;
           see section 4.30.3.

        -  End Of Record

        -  End Of File

       With a serial connection, the only available special command is
       `Break'.

3.1.3.3 Starting new sessions

       PuTTY's system menu provides some shortcut ways to start new
       sessions:

        -  Selecting `New Session' will start a completely new instance of
           PuTTY, and bring up the configuration box as normal.

        -  Selecting `Duplicate Session' will start a session in a new
           window with precisely the same options as your current one -
           connecting to the same host using the same protocol, with all
           the same terminal settings and everything.

        -  In an inactive window, selecting `Restart Session' will do the
           same as `Duplicate Session', but in the current window.

        -  The `Saved Sessions' submenu gives you quick access to any sets
           of stored session details you have previously saved. See section
           4.1.2 for details of how to create saved sessions.

3.1.3.4 Changing your session settings

       If you select `Change Settings' from the system menu, PuTTY will
       display a cut-down version of its initial configuration box. This
       allows you to adjust most properties of your current session. You
       can change the terminal size, the font, the actions of various
       keypresses, the colours, and so on.

       Some of the options that are available in the main configuration box
       are not shown in the cut-down Change Settings box. These are usually
       options which don't make sense to change in the middle of a session
       (for example, you can't switch from SSH to Telnet in mid-session).

       You can save the current settings to a saved session for future use
       from this dialog box. See section 4.1.2 for more on saved sessions.

3.1.3.5 Copy All to Clipboard

       This system menu option provides a convenient way to copy the whole
       contents of the terminal screen (up to the last nonempty line) and
       scrollback to the clipboard in one go.

3.1.3.6 Clearing and resetting the terminal

       The `Clear Scrollback' option on the system menu tells PuTTY to
       discard all the lines of text that have been kept after they
       scrolled off the top of the screen. This might be useful, for
       example, if you displayed sensitive information and wanted to make
       sure nobody could look over your shoulder and see it. (Note that
       this only prevents a casual user from using the scrollbar to view
       the information; the text is not guaranteed not to still be in
       PuTTY's memory.)

       The `Reset Terminal' option causes a full reset of the terminal
       emulation. A VT-series terminal is a complex piece of software and
       can easily get into a state where all the text printed becomes
       unreadable. (This can happen, for example, if you accidentally
       output a binary file to your terminal.) If this happens, selecting
       Reset Terminal should sort it out.

3.1.3.7 Full screen mode

       If you find the title bar on a maximised window to be ugly or
       distracting, you can select Full Screen mode to maximise PuTTY `even
       more'. When you select this, PuTTY will expand to fill the whole
       screen and its borders, title bar and scrollbar will disappear. (You
       can configure the scrollbar not to disappear in full-screen mode if
       you want to keep it; see section 4.7.3.)

       When you are in full-screen mode, you can still access the system
       menu if you click the left mouse button in the _extreme_ top left
       corner of the screen.

   3.2 Creating a log file of your session

       For some purposes you may find you want to log everything that
       appears on your screen. You can do this using the `Logging' panel in
       the configuration box.

       To begin a session log, select `Change Settings' from the system
       menu and go to the Logging panel. Enter a log file name, and select
       a logging mode. (You can log all session output including the
       terminal control sequences, or you can just log the printable text.
       It depends what you want the log for.) Click `Apply' and your log
       will be started. Later on, you can go back to the Logging panel and
       select `Logging turned off completely' to stop logging; then PuTTY
       will close the log file and you can safely read it.

       See section 4.2 for more details and options.

   3.3 Altering your character set configuration

       If you find that special characters (accented characters, for
       example, or line-drawing characters) are not being displayed
       correctly in your PuTTY session, it may be that PuTTY is
       interpreting the characters sent by the server according to the
       wrong _character set_. There are a lot of different character sets
       available, and no good way for PuTTY to know which to use, so it's
       entirely possible for this to happen.

       If you click `Change Settings' and look at the `Translation' panel,
       you should see a large number of character sets which you can
       select, and other related options. Now all you need is to find out
       which of them you want! (See section 4.10 for more information.)

   3.4 Using X11 forwarding in SSH

       The SSH protocol has the ability to securely forward X Window System
       graphical applications over your encrypted SSH connection, so that
       you can run an application on the SSH server machine and have it put
       its windows up on your local machine without sending any X network
       traffic in the clear.

       In order to use this feature, you will need an X display server
       for your Windows machine, such as Cygwin/X, X-Win32, or Exceed.
       This will probably install itself as display number 0 on your local
       machine; if it doesn't, the manual for the X server should tell you
       what it does do.

       You should then tick the `Enable X11 forwarding' box in the X11
       panel (see section 4.25) before starting your SSH session. The `X
       display location' box is blank by default, which means that PuTTY
       will try to use a sensible default such as `:0', which is the usual
       display location where your X server will be installed. If that
       needs changing, then change it.

       Now you should be able to log in to the SSH server as normal. To
       check that X forwarding has been successfully negotiated during
       connection startup, you can check the PuTTY Event Log (see section
       3.1.3.1). It should say something like this:

         2001-12-05 17:22:01 Requesting X11 forwarding
         2001-12-05 17:22:02 X11 forwarding enabled

       If the remote system is Unix or Unix-like, you should also be able
       to see that the `DISPLAY' environment variable has been set to point
       at display 10 or above on the SSH server machine itself:

         fred@unixbox:~$ echo $DISPLAY
         unixbox:10.0

       If this works, you should then be able to run X applications in the
       remote session and have them display their windows on your PC.

       For more options relating to X11 forwarding, see section 4.25.

   3.5 Using port forwarding in SSH

       The SSH protocol has the ability to forward arbitrary network
       (TCP) connections over your encrypted SSH connection, to avoid the
       network traffic being sent in clear. For example, you could use
       this to connect from your home computer to a POP-3 server on a
       remote machine without your POP-3 password being visible to network
       sniffers.

       In order to use port forwarding to connect from your local machine
       to a port on a remote server, you need to:

        -  Choose a port number on your local machine where PuTTY should
           listen for incoming connections. There are likely to be plenty
           of unused port numbers above 3000. (You can also use a local
           loopback address here; see below for more details.)

        -  Now, before you start your SSH connection, go to the Tunnels
           panel (see section 4.26). Make sure the `Local' radio button
           is set. Enter the local port number into the `Source port'
           box. Enter the destination host name and port number into
           the `Destination' box, separated by a colon (for example,
           `popserver.example.com:110' to connect to a POP-3 server).

        -  Now click the `Add' button. The details of your port forwarding
           should appear in the list box.

       Now start your session and log in. (Port forwarding will not be
       enabled until after you have logged in; otherwise it would be easy
       to perform completely anonymous network attacks, and gain access to
       anyone's virtual private network.) To check that PuTTY has set up
       the port forwarding correctly, you can look at the PuTTY Event Log
       (see section 3.1.3.1). It should say something like this:

         2001-12-05 17:22:10 Local port 3110 forwarding to
                  popserver.example.com:110

       Now if you connect to the source port number on your local PC, you
       should find that it answers you exactly as if it were the service
       running on the destination machine. So in this example, you could
       then configure an e-mail client to use `localhost:3110' as a POP-
       3 server instead of `popserver.example.com:110'. (Of course, the
       forwarding will stop happening when your PuTTY session closes down.)

       You can also forward ports in the other direction: arrange for a
       particular port number on the _server_ machine to be forwarded back
       to your PC as a connection to a service on your PC or near it. To do
       this, just select the `Remote' radio button instead of the `Local'
       one. The `Source port' box will now specify a port number on the
       _server_ (note that most servers will not allow you to use port
       numbers under 1024 for this purpose).

       An alternative way to forward local connections to remote hosts
       is to use dynamic SOCKS proxying. In this mode, PuTTY acts as a
       SOCKS server, which SOCKS-aware programs can connect to and open
       forwarded connections to the destination of their choice, so this
       can be an alternative to long lists of static forwardings. To use
       this mode, you will need to select the `Dynamic' radio button
       instead of `Local', and then you should not enter anything into the
       `Destination' box (it will be ignored). PuTTY will then listen for
       SOCKS connections on the port you have specified. Most web browsers
       can be configured to connect to this SOCKS proxy service; also, you
       can forward other PuTTY connections through it by setting up the
       Proxy control panel (see section 4.16 for details).

       The source port for a forwarded connection usually does not accept
       connections from any machine except the SSH client or server machine
       itself (for local and remote forwardings respectively). There are
       controls in the Tunnels panel to change this:

        -  The `Local ports accept connections from other hosts' option
           allows you to set up local-to-remote port forwardings (including
           dynamic port forwardings) in such a way that machines other than
           your client PC can connect to the forwarded port.

        -  The `Remote ports do the same' option does the same thing for
           remote-to-local port forwardings (so that machines other than
           the SSH server machine can connect to the forwarded port.) Note
           that this feature is only available in the SSH-2 protocol, and
           not all SSH-2 servers honour it (in OpenSSH, for example, it's
           usually disabled by default).

       You can also specify an IP address to listen on. Typically a
       Windows machine can be asked to listen on any single IP address
       in the 127.*.*.* range, and all of these are loopback addresses
       available only to the local machine. So if you forward (for example)
       `127.0.0.5:79' to a remote machine's finger port, then you should be
       able to run commands such as `finger fred@127.0.0.5'. This can be
       useful if the program connecting to the forwarded port doesn't allow
       you to change the port number it uses. This feature is available
       for local-to-remote forwarded ports; SSH-1 is unable to support it
       for remote-to-local ports, while SSH-2 can support it in theory but
       servers will not necessarily cooperate.

       (Note that if you're using Windows XP Service Pack 2, you may need
       to obtain a fix from Microsoft in order to use addresses like
       127.0.0.5 - see question A.7.17.)

       For more options relating to port forwarding, see section 4.26.

       If the connection you are forwarding over SSH is itself a second
       SSH connection made by another copy of PuTTY, you might find the
       `logical host name' configuration option useful to warn PuTTY of
       which host key it should be expecting. See section 4.14.5 for
       details of this.

   3.6 Connecting to a local serial line

       PuTTY can connect directly to a local serial line as an alternative
       to making a network connection. In this mode, text typed into the
       PuTTY window will be sent straight out of your computer's serial
       port, and data received through that port will be displayed in the
       PuTTY window. You might use this mode, for example, if your serial
       port is connected to another computer which has a serial connection.

       To make a connection of this type, simply select `Serial' from the
       `Connection type' radio buttons on the `Session' configuration panel
       (see section 4.1.1). The `Host Name' and `Port' boxes will transform
       into `Serial line' and `Speed', allowing you to specify which serial
       line to use (if your computer has more than one) and what speed
       (baud rate) to use when transferring data. For further configuration
       options (data bits, stop bits, parity, flow control), you can use
       the `Serial' configuration panel (see section 4.29).

       After you start up PuTTY in serial mode, you might find that you
       have to make the first move, by sending some data out of the serial
       line in order to notify the device at the other end that someone is
       there for it to talk to. This probably depends on the device. If you
       start up a PuTTY serial session and nothing appears in the window,
       try pressing Return a few times and see if that helps.

       A serial line provides no well defined means for one end of the
       connection to notify the other that the connection is finished.
       Therefore, PuTTY in serial mode will remain connected until you
       close the window using the close button.

   3.7 Making raw TCP connections

       A lot of Internet protocols are composed of commands and responses
       in plain text. For example, SMTP (the protocol used to transfer e-
       mail), NNTP (the protocol used to transfer Usenet news), and HTTP
       (the protocol used to serve Web pages) all consist of commands in
       readable plain text.

       Sometimes it can be useful to connect directly to one of these
       services and speak the protocol `by hand', by typing protocol
       commands and watching the responses. On Unix machines, you can do
       this using the system's `telnet' command to connect to the right
       port number. For example, `telnet mailserver.example.com 25' might
       enable you to talk directly to the SMTP service running on a mail
       server.

       Although the Unix `telnet' program provides this functionality, the
       protocol being used is not really Telnet. Really there is no actual
       protocol at all; the bytes sent down the connection are exactly the
       ones you type, and the bytes shown on the screen are exactly the
       ones sent by the server. Unix `telnet' will attempt to detect or
       guess whether the service it is talking to is a real Telnet service
       or not; PuTTY prefers to be told for certain.

       In order to make a debugging connection to a service of this
       type, you simply select the fourth protocol name, `Raw', from the
       `Protocol' buttons in the `Session' configuration panel. (See
       section 4.1.1.) You can then enter a host name and a port number,
       and make the connection.

   3.8 Connecting using the Telnet protocol

       PuTTY can use the Telnet protocol to connect to a server.

       Telnet was perhaps the most popular remote login protocol before SSH
       was introduced. It was general enough to be used by multiple server
       operating systems (Unix and VMS in particular), and supported many
       optional protocol extensions providing extra support for particular
       server features.

       Unlike SSH, Telnet runs over an unsecured network connection, so it
       is a very bad idea to use it over the hostile Internet (though it is
       still used to some extent as of 2020).

   3.9 Connecting using the Rlogin protocol

       PuTTY can use the Rlogin protocol to connect to a server.

       Rlogin was similar to Telnet in concept, but more focused on
       connections between Unix machines. It supported a feature for
       passwordless login, based on use of `privileged ports' (ports with
       numbers below 1024, which Unix traditionally does not allow users
       other than root to allocate). Ultimately, based on the server
       trusting that the client's IP address was owned by the Unix machine
       it claimed to be, and that that machine would guard its privileged
       ports appropriately.

       Like Telnet, Rlogin runs over an unsecured network connection.

  3.10 Connecting using the SUPDUP protocol

       PuTTY can use the SUPDUP protocol to connect to a server.

       SUPDUP is a login protocol used mainly by PDP-10 and Lisp machines
       during the period 1975-1990. Like Telnet and Rlogin, it is
       unsecured, so modern systems almost never support it.

       To make a connection of this type, select `SUPDUP' from the
       `Connection type' radio buttons on the `Session' panel (see section
       4.1.1). For further configuration options (character set, more
       processing, scrolling), you can use the `SUPDUP' configuration panel
       (see section 4.32).

       In SUPDUP, terminal emulation is more integrated with the network
       protocol than in other protocols such as SSH. The SUPDUP protocol
       can thus only be used with PuTTY proper, not with the command-line
       tool Plink.

       The SUPDUP protocol does not support changing the terminal
       dimensions, so this capability is disabled during a SUPDUP session.

       SUPDUP provides no well defined means for one end of the connection
       to notify the other that the connection is finished. Therefore,
       PuTTY in SUPDUP mode will remain connected until you close the
       window using the close button.

  3.11 The PuTTY command line

       PuTTY can be made to do various things without user intervention
       by supplying command-line arguments (e.g., from a command prompt
       window, or a Windows shortcut).

3.11.1 Starting a session from the command line

       These options allow you to bypass the configuration window and
       launch straight into a session.

       To start a connection to a server called `host':

         putty.exe [-ssh | -ssh-connection | -telnet | -rlogin | -supdup | -raw] [user@]host

       If this syntax is used, settings are taken from the Default Settings
       (see section 4.1.2); `user' overrides these settings if supplied.
       Also, you can specify a protocol, which will override the default
       protocol (see section 3.11.3.2).

       For telnet sessions, the following alternative syntax is supported
       (this makes PuTTY suitable for use as a URL handler for telnet URLs
       in web browsers):

         putty.exe telnet://host[:port]/

       To start a connection to a serial port, e.g. COM1:

         putty.exe -serial com1

       In order to start an existing saved session called `sessionname',
       use the `-load' option (described in section 3.11.3.1).

         putty.exe -load "session name"

3.11.2 `-cleanup'

       If invoked with the `-cleanup' option, rather than running as
       normal, PuTTY will remove its registry entries and random seed file
       from the local machine (after confirming with the user). It will
       also attempt to remove information about recently launched sessions
       stored in the `jump list' on Windows 7 and up.

       Note that on multi-user systems, `-cleanup' only removes registry
       entries and files associated with the currently logged-in user.

3.11.3 Standard command-line options

       PuTTY and its associated tools support a range of command-line
       options, most of which are consistent across all the tools. This
       section lists the available options in all tools. Options which are
       specific to a particular tool are covered in the chapter about that
       tool.

3.11.3.1 `-load': load a saved session

       The `-load' option causes PuTTY to load configuration details out
       of a saved session. If these details include a host name, then this
       option is all you need to make PuTTY start a session.

       You need double quotes around the session name if it contains
       spaces.

       If you want to create a Windows shortcut to start a PuTTY saved
       session, this is the option you should use: your shortcut should
       call something like

         d:\path\to\putty.exe -load "my session"

       (Note that PuTTY itself supports an alternative form of this option,
       for backwards compatibility. If you execute `putty @sessionname' it
       will have the same effect as `putty -load "sessionname"'. With the
       `@' form, no double quotes are required, and the `@' sign must be
       the very first thing on the command line. This form of the option is
       deprecated.)

3.11.3.2 Selecting a protocol: `-ssh', `-ssh-connection', `-telnet', `-
       rlogin', `-supdup', `-raw', `-serial'

       To choose which protocol you want to connect with, you can use one
       of these options:

        -  `-ssh' selects the SSH protocol.

        -  `-ssh-connection' selects the bare ssh-connection protocol.
           (This is only useful in specialised circumstances; see section
           4.28 for more information.)

        -  `-telnet' selects the Telnet protocol.

        -  `-rlogin' selects the Rlogin protocol.

        -  `-supdup' selects the SUPDUP protocol.

        -  `-raw' selects the raw protocol.

        -  `-serial' selects a serial connection.

       Most of these options are not available in the file transfer tools
       PSCP and PSFTP (which only work with the SSH protocol and the bare
       ssh-connection protocol).

       These options are equivalent to the protocol selection buttons
       in the Session panel of the PuTTY configuration box (see section
       4.1.1).

3.11.3.3 `-v': increase verbosity

       Most of the PuTTY tools can be made to tell you more about what they
       are doing by supplying the `-v' option. If you are having trouble
       when making a connection, or you're simply curious, you can turn
       this switch on and hope to find out more about what is happening.

3.11.3.4 `-l': specify a login name

       You can specify the user name to log in as on the remote server
       using the `-l' option. For example, `plink login.example.com -
       l fred'.

       These options are equivalent to the username selection box in
       the Connection panel of the PuTTY configuration box (see section
       4.15.1).

3.11.3.5 `-L', `-R' and `-D': set up port forwardings

       As well as setting up port forwardings in the PuTTY configuration
       (see section 4.26), you can also set up forwardings on the command
       line. The command-line options work just like the ones in Unix `ssh'
       programs.

       To forward a local port (say 5110) to a remote destination (say
       popserver.example.com port 110), you can write something like one of
       these:

         putty -L 5110:popserver.example.com:110 -load mysession
         plink mysession -L 5110:popserver.example.com:110

       To forward a remote port to a local destination, just use the `-R'
       option instead of `-L':

         putty -R 5023:mytelnetserver.myhouse.org:23 -load mysession
         plink mysession -R 5023:mytelnetserver.myhouse.org:23

       To specify an IP address for the listening end of the tunnel,
       prepend it to the argument:

         plink -L 127.0.0.5:23:localhost:23 myhost

       To set up SOCKS-based dynamic port forwarding on a local port, use
       the `-D' option. For this one you only have to pass the port number:

         putty -D 4096 -load mysession

       For general information on port forwarding, see section 3.5.

       These options are not available in the file transfer tools PSCP and
       PSFTP.

3.11.3.6 `-m': read a remote command or script from a file

       The `-m' option performs a similar function to the `Remote command'
       box in the SSH panel of the PuTTY configuration box (see section
       4.17.1). However, the `-m' option expects to be given a local file
       name, and it will read a command from that file.

       With some servers (particularly Unix systems), you can even put
       multiple lines in this file and execute more than one command in
       sequence, or a whole shell script; but this is arguably an abuse,
       and cannot be expected to work on all servers. In particular, it is
       known _not_ to work with certain `embedded' servers, such as Cisco
       routers.

       This option is not available in the file transfer tools PSCP and
       PSFTP.

3.11.3.7 `-P': specify a port number

       The `-P' option is used to specify the port number to connect to. If
       you have a Telnet server running on port 9696 of a machine instead
       of port 23, for example:

         putty -telnet -P 9696 host.name
         plink -telnet -P 9696 host.name

       (Note that this option is more useful in Plink than in PuTTY,
       because in PuTTY you can write `putty -telnet host.name 9696' in any
       case.)

       This option is equivalent to the port number control in the Session
       panel of the PuTTY configuration box (see section 4.1.1).

3.11.3.8 `-pwfile' and `-pw': specify a password

       A simple way to automate a remote login is to supply your password
       on the command line.

       The `-pwfile' option takes a file name as an argument. The first
       line of text in that file will be used as your password.

       The `-pw' option takes the password itself as an argument. This is
       *NOT SECURE* if anybody else uses the same computer, because the
       whole command line (including the password) is likely to show up
       if another user lists the running processes. `-pw' is retained for
       backwards compatibility only; you should use `-pwfile' instead.

       Note that these options only work when you are using the SSH
       protocol. Due to fundamental limitations of Telnet, Rlogin,
       and SUPDUP, these protocols do not support automated password
       authentication.

3.11.3.9 `-agent' and `-noagent': control use of Pageant for authentication

       The `-agent' option turns on SSH authentication using Pageant, and
       `-noagent' turns it off. These options are only meaningful if you
       are using SSH.

       See chapter 9 for general information on Pageant.

       These options are equivalent to the agent authentication checkbox in
       the Auth panel of the PuTTY configuration box (see section 4.21.4).

3.11.3.10 `-A' and `-a': control agent forwarding

       The `-A' option turns on SSH agent forwarding, and `-a' turns it
       off. These options are only meaningful if you are using SSH.

       See chapter 9 for general information on Pageant, and section 9.4
       for information on agent forwarding. Note that there is a security
       risk involved with enabling this option; see section 9.6 for
       details.

       These options are equivalent to the agent forwarding checkbox in the
       Auth panel of the PuTTY configuration box (see section 4.21.7).

       These options are not available in the file transfer tools PSCP and
       PSFTP.

3.11.3.11 `-X' and `-x': control X11 forwarding

       The `-X' option turns on X11 forwarding in SSH, and `-x' turns it
       off. These options are only meaningful if you are using SSH.

       For information on X11 forwarding, see section 3.4.

       These options are equivalent to the X11 forwarding checkbox in the
       X11 panel of the PuTTY configuration box (see section 4.25).

       These options are not available in the file transfer tools PSCP and
       PSFTP.

3.11.3.12 `-t' and `-T': control pseudo-terminal allocation

       The `-t' option ensures PuTTY attempts to allocate a pseudo-terminal
       at the server, and `-T' stops it from allocating one. These options
       are only meaningful if you are using SSH.

       These options are equivalent to the `Don't allocate a pseudo-
       terminal' checkbox in the SSH panel of the PuTTY configuration box
       (see section 4.24.1).

       These options are not available in the file transfer tools PSCP and
       PSFTP.

3.11.3.13 `-N': suppress starting a shell or command

       The `-N' option prevents PuTTY from attempting to start a shell or
       command on the remote server. You might want to use this option if
       you are only using the SSH connection for port forwarding, and your
       user account on the server does not have the ability to run a shell.

       This feature is only available in SSH protocol version 2 (since the
       version 1 protocol assumes you will always want to run a shell).

       This option is equivalent to the `Don't start a shell or command at
       all' checkbox in the SSH panel of the PuTTY configuration box (see
       section 4.17.2).

       This option is not available in the file transfer tools PSCP and
       PSFTP.

3.11.3.14 `-nc': make a remote network connection in place of a remote
       shell or command

       The `-nc' option prevents Plink (or PuTTY) from attempting to start
       a shell or command on the remote server. Instead, it will instruct
       the remote server to open a network connection to a host name and
       port number specified by you, and treat that network connection as
       if it were the main session.

       You specify a host and port as an argument to the `-nc' option, with
       a colon separating the host name from the port number, like this:

         plink host1.example.com -nc host2.example.com:1234

       This can be useful if you're trying to make a connection to a target
       host which you can only reach by SSH forwarding through a proxy
       host. One way to do this would be to have an existing SSH connection
       to the proxy host, with a port forwarding, but if you prefer to have
       the connection started on demand as needed, then this approach can
       also work.

       However, this does depend on the program _using_ the proxy being
       able to run a subprocess in place of making a network connection.
       PuTTY itself can do this using the `Local' proxy type, but there's a
       built-in more flexible way using the `SSH' proxy type. (See section
       4.16.1 for a description of both.) So this feature is probably most
       useful with another client program as the end user.

       This feature is only available in SSH protocol version 2 (since the
       version 1 protocol assumes you will always want to run a shell). It
       is not available in the file transfer tools PSCP and PSFTP. It is
       available in PuTTY itself, although it is unlikely to be very useful
       in any tool other than Plink. Also, `-nc' uses the same server
       functionality as port forwarding, so it will not work if your server
       administrator has disabled port forwarding.

       (The option is named `-nc' after the Unix program `nc', short for
       `netcat'. The command `plink host1 -nc host2:port' is very similar
       in functionality to `plink host1 nc host2 port', which invokes `nc'
       on the server and tells it to connect to the specified destination.
       However, Plink's built-in `-nc' option does not depend on the `nc'
       program being installed on the server.)

3.11.3.15 `-C': enable compression

       The `-C' option enables compression of the data sent across the
       network. This option is only meaningful if you are using SSH.

       This option is equivalent to the `Enable compression' checkbox in
       the SSH panel of the PuTTY configuration box (see section 4.17.3).

3.11.3.16 `-1' and `-2': specify an SSH protocol version

       The `-1' and `-2' options force PuTTY to use version 1 or version 2
       of the SSH protocol. These options are only meaningful if you are
       using SSH.

       These options are equivalent to selecting the SSH protocol version
       in the SSH panel of the PuTTY configuration box (see section
       4.17.4).

3.11.3.17 `-4' and `-6': specify an Internet protocol version

       The `-4' and `-6' options force PuTTY to use the older Internet
       protocol IPv4 or the newer IPv6 for most outgoing connections.

       These options are equivalent to selecting your preferred Internet
       protocol version as `IPv4' or `IPv6' in the Connection panel of the
       PuTTY configuration box (see section 4.14.4).

3.11.3.18 `-i': specify an SSH private key

       The `-i' option allows you to specify the name of a private key file
       in `*.PPK' format which PuTTY will use to authenticate with the
       server. This option is only meaningful if you are using SSH.

       If you are using Pageant, you can also specify a _public_ key file
       (in RFC 4716 or OpenSSH format) to identify a specific key file to
       use. (This won't work if you're not running Pageant, of course.)

       For general information on public-key authentication, see chapter 8.

       This option is equivalent to the `Private key file for
       authentication' box in the Auth panel of the PuTTY configuration box
       (see section 4.22.1).

3.11.3.19 `-cert': specify an SSH certificate

       The `-cert' option allows you to specify the name of a certificate
       file containing a signed version of your public key. If you specify
       this option, PuTTY will present that certificate in place of the
       plain public key, whenever it tries to authenticate with a key that
       matches. (This applies whether the key is stored in Pageant or
       loaded directly from a file by PuTTY.)

       This option is equivalent to the `Certificate to use with the
       private key' box in the Auth panel of the PuTTY configuration box
       (see section 4.22.2).

3.11.3.20 `-no-trivial-auth': disconnect if SSH authentication succeeds
       trivially

       This option causes PuTTY to abandon an SSH session if the server
       accepts authentication without ever having asked for any kind of
       password or signature or token.

       See section 4.21.3 for why you might want this.

3.11.3.21 `-loghost': specify a logical host name

       This option overrides PuTTY's normal SSH host key caching policy by
       telling it the name of the host you expect your connection to end up
       at (in cases where this differs from the location PuTTY thinks it's
       connecting to). It can be a plain host name, or a host name followed
       by a colon and a port number. See section 4.14.5 for more detail on
       this.

3.11.3.22 `-hostkey': manually specify an expected host key

       This option overrides PuTTY's normal SSH host key caching policy
       by telling it exactly what host key to expect, which can be
       useful if the normal automatic host key store in the Registry is
       unavailable. The argument to this option should be either a host key
       fingerprint, or an SSH-2 public key blob. See section 4.19.3 for
       more information.

       You can specify this option more than once if you want to configure
       more than one key to be accepted.

3.11.3.23 `-pgpfp': display PGP key fingerprints

       This option causes the PuTTY tools not to run as normal, but instead
       to display the fingerprints of the PuTTY PGP Master Keys, in
       order to aid with verifying new versions. See appendix F for more
       information.

3.11.3.24 `-sercfg': specify serial port configuration

       This option specifies the configuration parameters for the serial
       port (baud rate, stop bits etc). Its argument is interpreted as
       a comma-separated list of configuration options, which can be as
       follows:

        -  Any single digit from 5 to 9 sets the number of data bits.

        -  `1', `1.5' or `2' sets the number of stop bits.

        -  Any other numeric string is interpreted as a baud rate.

        -  A single lower-case letter specifies the parity: `n' for none,
           `o' for odd, `e' for even, `m' for mark and `s' for space.

        -  A single upper-case letter specifies the flow control: `N' for
           none, `X' for XON/XOFF, `R' for RTS/CTS and `D' for DSR/DTR.

       For example, `-sercfg 19200,8,n,1,N' denotes a baud rate of 19200, 8
       data bits, no parity, 1 stop bit and no flow control.

3.11.3.25 `-sessionlog', `-sshlog', `-sshrawlog': enable session logging

       These options cause the PuTTY network tools to write out a log
       file. Each of them expects a file name as an argument, e.g. `-
       sshlog putty.log' causes an SSH packet log to be written to a file
       called `putty.log'. The three different options select different
       logging modes, all available from the GUI too:

        -  `-sessionlog' selects `All session output' logging mode.

        -  `-sshlog' selects `SSH packets' logging mode.

        -  `-sshrawlog' selects `SSH packets and raw data' logging mode.

       For more information on logging configuration, see section 4.2.

3.11.3.26 `-logoverwrite', `-logappend': control behaviour with existing
       log file

       If logging has been enabled (in the saved configuration, or by
       another command-line option), and the specified log file already
       exists, these options tell the PuTTY network tools what to do so
       that they don't have to ask the user. See section 4.2.2 for details.

3.11.3.27 `-proxycmd': specify a local proxy command

       This option enables PuTTY's mode for running a command on the local
       machine and using it as a proxy for the network connection. It
       expects a shell command string as an argument.

       See section 4.16.1 for more information on this, and on other proxy
       settings. In particular, note that since the special sequences
       described there are understood in the argument string, literal
       backslashes must be doubled (if you want `\' in your command, you
       must put `\\' on the command line).

3.11.3.28 `-restrict-acl': restrict the Windows process ACL

       This option (on Windows only) causes PuTTY (or another PuTTY tool)
       to try to lock down the operating system's access control on its own
       process. If this succeeds, it should present an extra obstacle to
       malware that has managed to run under the same user id as the PuTTY
       process, by preventing it from attaching to PuTTY using the same
       interfaces debuggers use and either reading sensitive information
       out of its memory or hijacking its network session.

       This option is not enabled by default, because this form of
       interaction between Windows programs has many legitimate uses,
       including accessibility software such as screen readers. Also,
       it cannot provide full security against this class of attack in
       any case, because PuTTY can only lock down its own ACL _after_ it
       has started up, and malware could still get in if it attacks the
       process between startup and lockdown. So it trades away noticeable
       convenience, and delivers less real security than you might want.
       However, if you do want to make that tradeoff anyway, the option is
       available.

       A PuTTY process started with `-restrict-acl' will pass that on to
       any processes started with Duplicate Session, New Session etc.
       (However, if you're invoking PuTTY tools explicitly, for instance as
       a proxy command, you'll need to arrange to pass them the `-restrict-
       acl' option yourself, if that's what you want.)

       If Pageant is started with the `-restrict-acl' option, and you use
       it to launch a PuTTY session from its System Tray submenu, then
       Pageant will _not_ default to starting the PuTTY subprocess with
       a restricted ACL. This is because PuTTY is more likely to suffer
       reduced functionality as a result of restricted ACLs (e.g. screen
       reader software will have a greater need to interact with it),
       whereas Pageant stores the more critical information (hence benefits
       more from the extra protection), so it's reasonable to want to run
       Pageant but not PuTTY with the ACL restrictions. You can force
       Pageant to start subsidiary PuTTY processes with a restricted ACL if
       you also pass the `-restrict-putty-acl' option.

3.11.3.29 `-host-ca': launch the host CA configuration

       If you start PuTTY with the `-host-ca' option, it will not launch
       a session at all. Instead, it will just display the configuration
       dialog box for host certification authorities, as described in
       section 4.19.4. When you dismiss that dialog box, PuTTY will
       terminate.

3.11.3.30 `-legacy-stdio-prompts': handle Windows console prompts like
       older versions of PuTTY

       This option applies to all of PSCP, PSFTP and Plink on Windows: all
       the tools in the PuTTY suite that run in a Windows console and make
       SSH connections.

       These tools use the Windows console to prompt for various
       information: usernames, passwords, answers to questions about host
       keys, and so on.

       In current versions of PuTTY, these prompts work by direct access
       to the Windows console. This means that even if you redirect the
       standard input or output of the tool, prompts will _still_ be sent
       to the console (and not where you've redirected your output), and
       the user's responses will be read from the console (and not from
       where you've redirected your input).

       Another advantage of reading directly from the Windows console is
       that the tools can read input as Unicode. So this also allows you
       to enter usernames and passwords that contain characters not in the
       Windows system's default character set.

       In versions of the PuTTY tools up to and including 0.81, the prompts
       used the tool's ordinary I/O handles, so prompt output and user
       responses could be redirected.

       We think the new behaviour is more likely to be useful. For example,
       if you have a local command that generates output, and you want to
       pipe that output into a command running remotely via Plink, you can
       run a command line such as

         local_command | plink hostname remote_command

       and the data piped into the remote command will be the same whether
       or not Plink has to stop to ask for a password. With the old
       behaviour you would have had to include the password in Plink's
       input, which is more awkward.

       However, we recognise that people may have customised complicated
       workflows around the old behaviour. So if you need to switch back
       to it, you can do so by specifying `-legacy-stdio-prompts' on the
       command-line.

       To fully revert to the previous behaviour, you'd also need to
       specify `-legacy-charset-handling' (see the next section). (Even
       without that option, prompt handling with `-legacy-stdio-prompts'
       may not be fully Unicode-clean.)

3.11.3.31 `-legacy-charset-handling': handle character set in prompts like
       older versions of PuTTY

       This option applies to PuTTY (on all platforms), and also to all of
       PSCP, PSFTP and Plink on Windows.

       In current versions of PuTTY, when you are prompted in the terminal
       window for things like SSH usernames and passwords, the responses
       you type are interpreted as Unicode, and transmitted to the server
       as such, even if the terminal is otherwise configured to use a
       different character encoding (see section 4.10.1). Similarly, the
       same prompts from the Windows console tools will unconditionally
       interpret their input as Unicode.

       This behaviour is in line with the SSH standards; it allows things
       like usernames to use the full character set of the user's native
       language, and ensures that different keystrokes you type for your
       password are actually treated distinctly.

       However, if you are used to the behaviour of the PuTTY tools up to
       version 0.81, this could cause a previously working username and/or
       password not to work as you expected. For instance, if you had
       set a password including some accented characters, this change in
       behaviour could cause the same keystrokes you've always entered to
       start sending a different sequence of bytes to the server, denying
       you access (and you wouldn't even be able to see the difference,
       since the password is not shown when you type it).

       `-legacy-charset-handling' reverts the PuTTY tools' behaviour to
       how it was previously: what you type at these prompts will be
       interpreted according to the `Remote character set' (for PuTTY) or
       Windows' default character set (for the Windows console tools).

       (For example, this could allow you to log in to change your password
       to make using this option unnecessary in future. But if you're doing
       that, make sure the terminal is configured as UTF-8!)

Chapter 4: Configuring PuTTY
----------------------------

       This chapter describes all the configuration options in PuTTY.

       PuTTY is configured using the control panel that comes up before you
       start a session. Some options can also be changed in the middle of a
       session, by selecting `Change Settings' from the window menu.

   4.1 The Session panel

       The Session configuration panel contains the basic options you need
       to specify in order to open a session at all, and also allows you to
       save your settings to be reloaded later.

 4.1.1 The host name section

       The top box on the Session panel, labelled `Specify the destination
       you want to connect to', contains the details that need to be filled
       in before PuTTY can open a session at all.

        -  The `Host Name' box is where you type the name, or the IP
           address, of the server you want to connect to.

        -  The `Connection type' controls let you choose what type of
           connection you want to make: an SSH network connection, a
           connection to a local serial line, or various other kinds of
           network connection.

            -  See section 1.2 for a summary of the differences between
               the network remote login protocols SSH, Telnet, Rlogin, and
               SUPDUP.

            -  See section 3.6 for information about using a serial line.

            -  See section 3.7 for an explanation of `raw' connections.

            -  See section 3.8 for a little information about Telnet.

            -  See section 3.9 for information about using Rlogin.

            -  See section 3.10 for information about using SUPDUP.

            -  The `Bare ssh-connection' option in the `Connection type'
               control is intended for specialist uses not involving
               network connections. See section 4.28 for some information
               about it.

        -  The `Port' box lets you specify which port number on the server
           to connect to. If you select Telnet, Rlogin, SUPDUP, or SSH,
           this box will be filled in automatically to the usual value, and
           you will only need to change it if you have an unusual server.
           If you select Raw mode, you will almost certainly need to fill
           in the `Port' box yourself.

       If you select `Serial' from the `Connection type' radio buttons,
       the `Host Name' and `Port' boxes are replaced by `Serial line' and
       `Speed'; see section 4.29 for more details of these.

 4.1.2 Loading and storing saved sessions

       The next part of the Session configuration panel allows you to save
       your preferred PuTTY options so they will appear automatically the
       next time you start PuTTY. It also allows you to create _saved
       sessions_, which contain a full set of configuration options plus a
       host name and protocol. A saved session contains all the information
       PuTTY needs to start exactly the session you want.

        -  To save your default settings: first set up the settings the way
           you want them saved. Then come back to the Session panel. Select
           the `Default Settings' entry in the saved sessions list, with a
           single click. Then press the `Save' button.

       If there is a specific host you want to store the details of how
       to connect to, you should create a saved session, which will be
       separate from the Default Settings.

        -  To save a session: first go through the rest of the
           configuration box setting up all the options you want. Then come
           back to the Session panel. Enter a name for the saved session in
           the `Saved Sessions' input box. (The server name is often a good
           choice for a saved session name.) Then press the `Save' button.
           Your saved session name should now appear in the list box.

           You can also save settings in mid-session, from the `Change
           Settings' dialog. Settings changed since the start of the
           session will be saved with their current values; as well as
           settings changed through the dialog, this includes changes in
           window size, window title changes sent by the server, and so on.

        -  To reload a saved session: single-click to select the session
           name in the list box, and then press the `Load' button. Your
           saved settings should all appear in the configuration panel.

        -  To modify a saved session: first load it as described above.
           Then make the changes you want. Come back to the Session panel,
           and press the `Save' button. The new settings will be saved over
           the top of the old ones.

           To save the new settings under a different name, you can enter
           the new name in the `Saved Sessions' box, or single-click to
           select a session name in the list box to overwrite that session.
           To save `Default Settings', you must single-click the name
           before saving.

        -  To start a saved session immediately: double-click on the
           session name in the list box.

        -  To delete a saved session: single-click to select the session
           name in the list box, and then press the `Delete' button.

       Each saved session is independent of the Default Settings
       configuration. If you change your preferences and update Default
       Settings, you must also update every saved session separately.

       Saved sessions are stored in the Registry, at the location

         HKEY_CURRENT_USER\Software\SimonTatham\PuTTY\Sessions

       If you need to store them in a file, you could try the method
       described in section 4.33.

 4.1.3 `Close window on exit'

       Finally in the Session panel, there is an option labelled `Close
       window on exit'. This controls whether the PuTTY terminal window
       disappears as soon as the session inside it terminates. If you are
       likely to want to copy and paste text out of the session after it
       has terminated, or restart the session, you should arrange for this
       option to be off.

       `Close window on exit' has three settings. `Always' means always
       close the window on exit; `Never' means never close on exit (always
       leave the window open, but inactive). The third setting, and the
       default one, is `Only on clean exit'. In this mode, a session which
       terminates normally will cause its window to close, but one which is
       aborted unexpectedly by network trouble or a confusing message from
       the server will leave the window up.

   4.2 The Logging panel

       The Logging configuration panel allows you to save log files of your
       PuTTY sessions, for debugging, analysis or future reference.

       The main option is a radio-button set that specifies whether PuTTY
       will log anything at all. The options are:

        -  `None'. This is the default option; in this mode PuTTY will not
           create a log file at all.

        -  `Printable output'. In this mode, a log file will be created
           and written to, but only printable text will be saved into it.
           The various terminal control codes that are typically sent down
           an interactive session alongside the printable text will be
           omitted. This might be a useful mode if you want to read a log
           file in a text editor and hope to be able to make sense of it.

        -  `All session output'. In this mode, _everything_ sent by the
           server into your terminal session is logged. If you view the log
           file in a text editor, therefore, you may well find it full of
           strange control characters. This is a particularly useful mode
           if you are experiencing problems with PuTTY's terminal handling:
           you can record everything that went to the terminal, so that
           someone else can replay the session later in slow motion and
           watch to see what went wrong.

        -  `SSH packets'. In this mode (which is only used by SSH
           connections), the SSH message packets sent over the encrypted
           connection are written to the log file (as well as Event Log
           entries). You might need this to debug a network-level problem,
           or more likely to send to the PuTTY authors as part of a bug
           report. _BE WARNED_ that if you log in using a password, the
           password can appear in the log file; see section 4.2.5 for
           options that may help to remove sensitive material from the log
           file before you send it to anyone else.

        -  `SSH packets and raw data'. In this mode, as well as the
           decrypted packets (as in the previous mode), the _raw_
           (encrypted, compressed, etc) packets are _also_ logged. This
           could be useful to diagnose corruption in transit. (The same
           caveats as the previous mode apply, of course.)

       Note that the non-SSH logging options (`Printable output' and `All
       session output') only work with PuTTY proper; in programs without
       terminal emulation (such as Plink), they will have no effect, even
       if enabled via saved settings.

 4.2.1 `Log file name'

       In this edit box you enter the name of the file you want to log the
       session to. The `Browse' button will let you look around your file
       system to find the right place to put the file; or if you already
       know exactly where you want it to go, you can just type a pathname
       into the edit box.

       There are a few special features in this box. If you use the `&'
       character in the file name box, PuTTY will insert details of the
       current session in the name of the file it actually opens. The
       precise replacements it will do are:

        -  `&Y' will be replaced by the current year, as four digits.

        -  `&M' will be replaced by the current month, as two digits.

        -  `&D' will be replaced by the current day of the month, as two
           digits.

        -  `&T' will be replaced by the current time, as six digits
           (HHMMSS) with no punctuation.

        -  `&H' will be replaced by the host name you are connecting to (or
           the serial line, for a serial connection).

        -  `&P' will be replaced by the port number you are connecting to
           on the target host.

       (These are all case-insensitive.)

       For example, if you enter the file name `c:\puttylogs\log-&h-&y&m&d-
       &t.dat', you will end up with files looking like

         log-server1.example.com-20010528-110859.dat
         log-unixbox.somewhere.org-20010611-221001.dat

 4.2.2 `What to do if the log file already exists'

       This control allows you to specify what PuTTY should do if it tries
       to start writing to a log file and it finds the file already exists.
       You might want to automatically destroy the existing log file and
       start a new one with the same name. Alternatively, you might want to
       open the existing log file and add data to the _end_ of it. Finally
       (the default option), you might not want to have any automatic
       behaviour, but to ask the user every time the problem comes up.

 4.2.3 `Flush log file frequently'

       This option allows you to control how frequently logged data is
       flushed to disc. By default, PuTTY will flush data as soon as it
       is displayed, so that if you view the log file while a session is
       still open, it will be up to date; and if the client system crashes,
       there's a greater chance that the data will be preserved.

       However, this can incur a performance penalty. If PuTTY is running
       slowly with logging enabled, you could try unchecking this option.
       Be warned that the log file may not always be up to date as a result
       (although it will of course be flushed when it is closed, for
       instance at the end of a session).

 4.2.4 `Include header'

       This option allows you to choose whether to include a header line
       with the date and time when the log file is opened. It may be useful
       to disable this if the log file is being used as realtime input to
       other programs that don't expect the header line.

 4.2.5 Options specific to SSH packet logging

       These options only apply if SSH packet data is being logged.

       The following options allow particularly sensitive portions of
       unencrypted packets to be automatically left out of the log file.
       They are only intended to deter casual nosiness; an attacker could
       glean a lot of useful information from even these obfuscated logs
       (e.g., length of password).

4.2.5.1 `Omit known password fields'

       When checked, decrypted password fields are removed from the log of
       transmitted packets. (This includes any user responses to challenge-
       response authentication methods such as `keyboard-interactive'.)
       This does not include X11 authentication data if using X11
       forwarding.

       Note that this will only omit data that PuTTY _knows_ to be a
       password. However, if you start another login session within your
       PuTTY session, for instance, any password used will appear in the
       clear in the packet log. The next option may be of use to protect
       against this.

       This option is enabled by default.

4.2.5.2 `Omit session data'

       When checked, all decrypted `session data' is omitted; this is
       defined as data in terminal sessions and in forwarded channels (TCP,
       X11, and authentication agent). This will usually substantially
       reduce the size of the resulting log file.

       This option is disabled by default.

   4.3 The Terminal panel

       The Terminal configuration panel allows you to control the behaviour
       of PuTTY's terminal emulation.

 4.3.1 `Auto wrap mode initially on'

       Auto wrap mode controls what happens when text printed in a PuTTY
       window reaches the right-hand edge of the window.

       With auto wrap mode on, if a long line of text reaches the right-
       hand edge, it will wrap over on to the next line so you can still
       see all the text. With auto wrap mode off, the cursor will stay at
       the right-hand edge of the screen, and all the characters in the
       line will be printed on top of each other.

       If you are running a full-screen application and you occasionally
       find the screen scrolling up when it looks as if it shouldn't, you
       could try turning this option off.

       Auto wrap mode can be turned on and off by control sequences sent by
       the server. This configuration option controls the _default_ state,
       which will be restored when you reset the terminal (see section
       3.1.3.6). However, if you modify this option in mid-session using
       `Change Settings', it will take effect immediately.

 4.3.2 `DEC Origin Mode initially on'

       DEC Origin Mode is a minor option which controls how PuTTY
       interprets cursor-position control sequences sent by the server.

       The server can send a control sequence that restricts the scrolling
       region of the display. For example, in an editor, the server might
       reserve a line at the top of the screen and a line at the bottom,
       and might send a control sequence that causes scrolling operations
       to affect only the remaining lines.

       With DEC Origin Mode on, cursor coordinates are counted from the top
       of the scrolling region. With it turned off, cursor coordinates are
       counted from the top of the whole screen regardless of the scrolling
       region.

       It is unlikely you would need to change this option, but if you find
       a full-screen application is displaying pieces of text in what looks
       like the wrong part of the screen, you could try turning DEC Origin
       Mode on to see whether that helps.

       DEC Origin Mode can be turned on and off by control sequences sent
       by the server. This configuration option controls the _default_
       state, which will be restored when you reset the terminal (see
       section 3.1.3.6). However, if you modify this option in mid-session
       using `Change Settings', it will take effect immediately.

 4.3.3 `Implicit CR in every LF'

       Most servers send two control characters, CR and LF, to start a new
       line of the screen. The CR character makes the cursor return to the
       left-hand side of the screen. The LF character makes the cursor move
       one line down (and might make the screen scroll).

       Some servers only send LF, and expect the terminal to move the
       cursor over to the left automatically. If you come across a server
       that does this, you will see a stepped effect on the screen, like
       this:

         First line of text
                           Second line
                                      Third line

       If this happens to you, try enabling the `Implicit CR in every LF'
       option, and things might go back to normal:

         First line of text
         Second line
         Third line

 4.3.4 `Implicit LF in every CR'

       Most servers send two control characters, CR and LF, to start a new
       line of the screen. The CR character makes the cursor return to the
       left-hand side of the screen. The LF character makes the cursor move
       one line down (and might make the screen scroll).

       Some servers only send CR, and so the newly written line is
       overwritten by the following line. This option causes a line feed so
       that all lines are displayed.

 4.3.5 `Use background colour to erase screen'

       Not all terminals agree on what colour to turn the screen when the
       server sends a `clear screen' sequence. Some terminals believe the
       screen should always be cleared to the _default_ background colour.
       Others believe the screen should be cleared to whatever the server
       has selected as a background colour.

       There exist applications that expect both kinds of behaviour.
       Therefore, PuTTY can be configured to do either.

       With this option disabled, screen clearing is always done in the
       default background colour. With this option enabled, it is done in
       the _current_ background colour.

       Background-colour erase can be turned on and off by control
       sequences sent by the server. This configuration option controls the
       _default_ state, which will be restored when you reset the terminal
       (see section 3.1.3.6). However, if you modify this option in mid-
       session using `Change Settings', it will take effect immediately.

 4.3.6 `Enable blinking text'

       The server can ask PuTTY to display text that blinks on and off.
       This is very distracting, so PuTTY allows you to turn blinking text
       off completely.

       When blinking text is disabled and the server attempts to make
       some text blink, PuTTY will instead display the text with a bolded
       background colour.

       Blinking text can be turned on and off by control sequences sent by
       the server. This configuration option controls the _default_ state,
       which will be restored when you reset the terminal (see section
       3.1.3.6). However, if you modify this option in mid-session using
       `Change Settings', it will take effect immediately.

 4.3.7 `Answerback to ^E'

       This option controls what PuTTY will send back to the server if the
       server sends it the ^E enquiry character. Normally it just sends the
       string `PuTTY'.

       If you accidentally write the contents of a binary file to your
       terminal, you will probably find that it contains more than one ^E
       character, and as a result your next command line will probably
       read `PuTTYPuTTYPuTTY...' as if you had typed the answerback string
       multiple times at the keyboard. If you set the answerback string
       to be empty, this problem should go away, but doing so might cause
       other problems.

       Note that this is _not_ the feature of PuTTY which the server will
       typically use to determine your terminal type. That feature is the
       `Terminal-type string' in the Connection panel; see section 4.15.3
       for details.

       You can include control characters in the answerback string using
       `^C' notation. (Use `^~' to get a literal `^'.)

 4.3.8 `Local echo'

       With local echo disabled, characters you type into the PuTTY window
       are not echoed in the window _by PuTTY_. They are simply sent to the
       server. (The _server_ might choose to echo them back to you; this
       can't be controlled from the PuTTY control panel.)

       Some types of session need local echo, and many do not. In its
       default mode, PuTTY will automatically attempt to deduce whether
       or not local echo is appropriate for the session you are working
       in. If you find it has made the wrong decision, you can use this
       configuration option to override its choice: you can force local
       echo to be turned on, or force it to be turned off, instead of
       relying on the automatic detection.

 4.3.9 `Local line editing'

       Normally, every character you type into the PuTTY window is sent
       immediately to the server the moment you type it.

       If you enable local line editing, this changes. PuTTY will let you
       edit a whole line at a time locally, and the line will only be sent
       to the server when you press Return. If you make a mistake, you can
       use the Backspace key to correct it before you press Return, and the
       server will never see the mistake.

       Since it is hard to edit a line locally without being able to see
       it, local line editing is mostly used in conjunction with local echo
       (section 4.3.8). This makes it ideal for use in raw mode or when
       connecting to MUDs or talkers. (Although some more advanced MUDs do
       occasionally turn local line editing on and turn local echo off, in
       order to accept a password from the user.)

       Some types of session need local line editing, and many do not. In
       its default mode, PuTTY will automatically attempt to deduce whether
       or not local line editing is appropriate for the session you are
       working in. If you find it has made the wrong decision, you can use
       this configuration option to override its choice: you can force
       local line editing to be turned on, or force it to be turned off,
       instead of relying on the automatic detection.

4.3.10 Remote-controlled printing

       A lot of VT100-compatible terminals support printing under control
       of the remote server (sometimes called `passthrough printing').
       PuTTY supports this feature as well, but it is turned off by
       default.

       To enable remote-controlled printing, choose a printer from
       the `Printer to send ANSI printer output to' drop-down list
       box. This should allow you to select from all the printers you
       have installed drivers for on your computer. Alternatively, you
       can type the network name of a networked printer (for example,
       `\\printserver\printer1') even if you haven't already installed a
       driver for it on your own machine.

       When the remote server attempts to print some data, PuTTY will send
       that data to the printer _raw_ - without translating it, attempting
       to format it, or doing anything else to it. It is up to you to
       ensure your remote server knows what type of printer it is talking
       to.

       Since PuTTY sends data to the printer raw, it cannot offer options
       such as portrait versus landscape, print quality, or paper tray
       selection. All these things would be done by your PC printer driver
       (which PuTTY bypasses); if you need them done, you will have to find
       a way to configure your remote server to do them.

       To disable remote printing again, choose `None (printing disabled)'
       from the printer selection list. This is the default state.

   4.4 The Keyboard panel

       The Keyboard configuration panel allows you to control the behaviour
       of the keyboard in PuTTY. The correct state for many of these
       settings depends on what the server to which PuTTY is connecting
       expects. With a Unix server, this is likely to depend on the
       `termcap' or `terminfo' entry it uses, which in turn is likely to be
       controlled by the `Terminal-type string' setting in the Connection
       panel; see section 4.15.3 for details. If none of the settings here
       seems to help, you may find question A.7.13 to be useful.

 4.4.1 Changing the action of the Backspace key

       Some terminals believe that the Backspace key should send the same
       thing to the server as Control-H (ASCII code 8). Other terminals
       believe that the Backspace key should send ASCII code 127 (usually
       known as Control-?) so that it can be distinguished from Control-H.
       This option allows you to choose which code PuTTY generates when you
       press Backspace.

       If you are connecting over SSH, PuTTY by default tells the server
       the value of this option (see section 4.24.2), so you may find that
       the Backspace key does the right thing either way. Similarly, if
       you are connecting to a Unix system, you will probably find that
       the Unix `stty' command lets you configure which the server expects
       to see, so again you might not need to change which one PuTTY
       generates. On other systems, the server's expectation might be fixed
       and you might have no choice but to configure PuTTY.

       If you do have the choice, we recommend configuring PuTTY to
       generate Control-? and configuring the server to expect it, because
       that allows applications such as `emacs' to use Control-H for help.

       (Typing Shift-Backspace will cause PuTTY to send whichever code
       isn't configured here as the default.)

 4.4.2 Changing the action of the Home and End keys

       The Unix terminal emulator `rxvt' disagrees with the rest of the
       world about what character sequences should be sent to the server by
       the Home and End keys.

       `xterm', and other terminals, send `ESC [1~' for the Home key, and
       `ESC [4~' for the End key. `rxvt' sends `ESC [H' for the Home key
       and `ESC [Ow' for the End key.

       If you find an application on which the Home and End keys aren't
       working, you could try switching this option to see if it helps.

 4.4.3 Changing the action of the function keys and keypad

       This option affects the function keys (F1 to F12) and the top row of
       the numeric keypad.

        -  In the default mode, labelled `ESC [n~', the function keys
           generate sequences like `ESC [11~', `ESC [12~' and so on. This
           matches the general behaviour of Digital's terminals.

        -  In Linux mode, F6 to F12 behave just like the default mode, but
           F1 to F5 generate `ESC [[A' through to `ESC [[E'. This mimics
           the Linux virtual console.

        -  In Xterm R6 mode, F5 to F12 behave like the default mode, but
           F1 to F4 generate `ESC OP' through to `ESC OS', which are the
           sequences produced by the top row of the _keypad_ on Digital's
           terminals.

        -  In VT400 mode, all the function keys behave like the default
           mode, but the actual top row of the numeric keypad generates
           `ESC OP' through to `ESC OS'.

        -  In VT100+ mode, the function keys generate `ESC OP' through to
           `ESC O['

        -  In SCO mode, the function keys F1 to F12 generate `ESC [M'
           through to `ESC [X'. Together with shift, they generate `ESC [Y'
           through to `ESC [j'. With control they generate `ESC [k' through
           to `ESC [v', and with shift and control together they generate
           `ESC [w' through to `ESC [{'.

        -  In Xterm 216 mode, the unshifted function keys behave the same
           as Xterm R6 mode. But pressing a function key together with
           Shift or Alt or Ctrl generates a different sequence containing
           an extra numeric parameter of the form (1 for Shift) + (2 for
           Alt) + (4 for Ctrl) + 1. For F1-F4, the basic sequences like
           `ESC OP' become ESC [1;_bitmap_P and similar; for F5 and above,
           ESC[_index_~ becomes ESC[_index_;_bitmap_~.

       If you don't know what any of this means, you probably don't need to
       fiddle with it.

 4.4.4 Changing the action of the shifted arrow keys

       This option affects the arrow keys, if you press one with any of the
       modifier keys Shift, Ctrl or Alt held down.

        -  In the default mode, labelled `Ctrl toggles app mode', the
           Ctrl key toggles between the default arrow-key sequences like
           `ESC [A' and `ESC [B', and the sequences Digital's terminals
           generate in `application cursor keys' mode, i.e. `ESC O A' and
           so on. Shift and Alt have no effect.

        -  In the `xterm-style bitmap' mode, Shift, Ctrl and Alt all
           generate different sequences, with a number indicating which set
           of modifiers is active.

       If you don't know what any of this means, you probably don't need to
       fiddle with it.

 4.4.5 Controlling Application Cursor Keys mode

       Application Cursor Keys mode is a way for the server to change the
       control sequences sent by the arrow keys. In normal mode, the arrow
       keys send `ESC [A' through to `ESC [D'. In application mode, they
       send `ESC OA' through to `ESC OD'.

       Application Cursor Keys mode can be turned on and off by the server,
       depending on the application. PuTTY allows you to configure the
       initial state.

       You can also disable application cursor keys mode completely, using
       the `Features' configuration panel; see section 4.6.1.

 4.4.6 Controlling Application Keypad mode

       Application Keypad mode is a way for the server to change the
       behaviour of the numeric keypad.

       In normal mode, the keypad behaves like a normal Windows keypad:
       with NumLock on, the number keys generate numbers, and with NumLock
       off they act like the arrow keys and Home, End etc.

       In application mode, all the keypad keys send special control
       sequences, _including_ Num Lock. Num Lock stops behaving like Num
       Lock and becomes another function key.

       Depending on which version of Windows you run, you may find the Num
       Lock light still flashes on and off every time you press Num Lock,
       even when application mode is active and Num Lock is acting like a
       function key. This is unavoidable.

       Application keypad mode can be turned on and off by the server,
       depending on the application. PuTTY allows you to configure the
       initial state.

       You can also disable application keypad mode completely, using the
       `Features' configuration panel; see section 4.6.1.

 4.4.7 Using NetHack keypad mode

       PuTTY has a special mode for playing NetHack. You can enable it
       by selecting `NetHack' in the `Initial state of numeric keypad'
       control.

       In this mode, the numeric keypad keys 1-9 generate the NetHack
       movement commands (hjklyubn). The 5 key generates the `.' command
       (do nothing).

       In addition, pressing Shift or Ctrl with the keypad keys generate
       the Shift- or Ctrl-keys you would expect (e.g. keypad-7 generates
       `y', so Shift-keypad-7 generates `Y' and Ctrl-keypad-7 generates
       Ctrl-Y); these commands tell NetHack to keep moving you in the same
       direction until you encounter something interesting.

       For some reason, this feature only works properly when Num Lock is
       on. We don't know why.

 4.4.8 Enabling a DEC-like Compose key

       DEC terminals have a Compose key, which provides an easy-to-remember
       way of typing accented characters. You press Compose and then type
       two more characters. The two characters are `combined' to produce
       an accented character. The choices of character are designed to be
       easy to remember; for example, composing `e' and ``' produces the
       `e-grave' character.

       If your keyboard has a Windows Application key, it acts as a Compose
       key in PuTTY. Alternatively, if you enable the `AltGr acts as
       Compose key' option, the AltGr key will become a Compose key.

 4.4.9 `Control-Alt is different from AltGr'

       Some old keyboards do not have an AltGr key, which can make it
       difficult to type some characters. PuTTY can be configured to treat
       the key combination Ctrl + Left Alt the same way as the AltGr key.

       By default, this checkbox is checked, and the key combination Ctrl +
       Left Alt does something completely different. PuTTY's usual handling
       of the left Alt key is to prefix the Escape (Control-[) character to
       whatever character sequence the rest of the keypress would generate.
       For example, Alt-A generates Escape followed by `a'. So Alt-Ctrl-A
       would generate Escape, followed by Control-A.

       If you uncheck this box, Ctrl-Alt will become a synonym for AltGr,
       so you can use it to type extra graphic characters if your keyboard
       has any.

       (However, Ctrl-Alt will never act as a Compose key, regardless of
       the setting of `AltGr acts as Compose key' described in section
       4.4.8.)

   4.5 The Bell panel

       The Bell panel controls the terminal bell feature: the server's
       ability to cause PuTTY to beep at you.

       In the default configuration, when the server sends the character
       with ASCII code 7 (Control-G), PuTTY will play the Windows Default
       Beep sound. This is not always what you want the terminal bell
       feature to do; the Bell panel allows you to configure alternative
       actions.

 4.5.1 `Set the style of bell'

       This control allows you to select various different actions to occur
       on a terminal bell:

        -  Selecting `None' disables the bell completely. In this mode, the
           server can send as many Control-G characters as it likes and
           nothing at all will happen.

        -  `Make default system alert sound' is the default setting.
           It causes the Windows `Default Beep' sound to be played. To
           change what this sound is, or to test it if nothing seems to
           be happening, use the Sound configurer in the Windows Control
           Panel.

        -  `Visual bell' is a silent alternative to a beeping computer. In
           this mode, when the server sends a Control-G, the whole PuTTY
           window will flash white for a fraction of a second.

        -  `Beep using the PC speaker' is self-explanatory.

        -  `Play a custom sound file' allows you to specify a particular
           sound file to be used by PuTTY alone, or even by a particular
           individual PuTTY session. This allows you to distinguish your
           PuTTY beeps from any other beeps on the system. If you select
           this option, you will also need to enter the name of your sound
           file in the edit control `Custom sound file to play as a bell'.

 4.5.2 `Taskbar/caption indication on bell'

       This feature controls what happens to the PuTTY window's entry in
       the Windows Taskbar if a bell occurs while the window does not have
       the input focus.

       In the default state (`Disabled') nothing unusual happens.

       If you select `Steady', then when a bell occurs and the window is
       not in focus, the window's Taskbar entry and its title bar will
       change colour to let you know that PuTTY session is asking for your
       attention. The change of colour will persist until you select the
       window, so you can leave several PuTTY windows minimised in your
       terminal, go away from your keyboard, and be sure not to have missed
       any important beeps when you get back.

       `Flashing' is even more eye-catching: the Taskbar entry will
       continuously flash on and off until you select the window.

 4.5.3 `Control the bell overload behaviour'

       A common user error in a terminal session is to accidentally run the
       Unix command `cat' (or equivalent) on an inappropriate file type,
       such as an executable, image file, or ZIP file. This produces a huge
       stream of non-text characters sent to the terminal, which typically
       includes a lot of bell characters. As a result of this the terminal
       often doesn't stop beeping for ten minutes, and everybody else in
       the office gets annoyed.

       To try to avoid this behaviour, or any other cause of excessive
       beeping, PuTTY includes a bell overload management feature. In the
       default configuration, receiving more than five bell characters in a
       two-second period will cause the overload feature to activate. Once
       the overload feature is active, further bells will  have no effect
       at all, so the rest of your binary file will be sent to the screen
       in silence. After a period of five seconds during which no further
       bells are received, the overload feature will turn itself off again
       and bells will be re-enabled.

       If you want this feature completely disabled, you can turn it off
       using the checkbox `Bell is temporarily disabled when over-used'.

       Alternatively, if you like the bell overload feature but don't
       agree with the settings, you can configure the details: how many
       bells constitute an overload, how short a time period they have to
       arrive in to do so, and how much silent time is required before the
       overload feature will deactivate itself.

       Bell overload mode is always deactivated by any keypress in the
       terminal. This means it can respond to large unexpected streams of
       data, but does not interfere with ordinary command-line activities
       that generate beeps (such as filename completion).

   4.6 The Features panel

       PuTTY's terminal emulation is very highly featured, and can do a
       lot of things under remote server control. Some of these features
       can cause problems due to buggy or strangely configured server
       applications.

       The Features configuration panel allows you to disable some of
       PuTTY's more advanced terminal features, in case they cause trouble.

 4.6.1 Disabling application keypad and cursor keys

       Application keypad mode (see section 4.4.6) and application cursor
       keys mode (see section 4.4.5) alter the behaviour of the keypad and
       cursor keys. Some applications enable these modes but then do not
       deal correctly with the modified keys. You can force these modes to
       be permanently disabled no matter what the server tries to do.

 4.6.2 Disabling xterm-style mouse reporting

       PuTTY allows the server to send control codes that let it take
       over the mouse and use it for purposes other than copy and paste.
       Applications which use this feature include the text-mode web
       browser `links', the Usenet newsreader `trn' version 4, and the file
       manager `mc' (Midnight Commander).

       If you find this feature inconvenient, you can disable it using the
       `Disable xterm-style mouse reporting' control. With this box ticked,
       the mouse will _always_ do copy and paste in the normal way.

       Note that even if the application takes over the mouse, you can
       still manage PuTTY's copy and paste by holding down the Shift key
       while you select and paste, unless you have deliberately turned this
       feature off (see section 4.11.2).

 4.6.3 Disabling remote terminal resizing

       PuTTY has the ability to change the terminal's size and position in
       response to commands from the server. If you find PuTTY is doing
       this unexpectedly or inconveniently, you can tell PuTTY not to
       respond to those server commands.

 4.6.4 Disabling switching to the alternate screen

       Many terminals, including PuTTY, support an `alternate screen'. This
       is the same size as the ordinary terminal screen, but separate.
       Typically a screen-based program such as a text editor might switch
       the terminal to the alternate screen before starting up. Then at the
       end of the run, it switches back to the primary screen, and you see
       the screen contents just as they were before starting the editor.

       Some people prefer this not to happen. If you want your editor to
       run in the same screen as the rest of your terminal activity, you
       can disable the alternate screen feature completely.

 4.6.5 Disabling remote window title changing

       PuTTY has the ability to change the window title in response
       to commands from the server. If you find PuTTY is doing this
       unexpectedly or inconveniently, you can tell PuTTY not to respond to
       those server commands.

 4.6.6 Response to remote window title querying

       PuTTY can optionally provide the xterm service of allowing server
       applications to find out the local window title. This feature is
       disabled by default, but you can turn it on if you really want it.

       NOTE that this feature is a _potential security hazard_. If a
       malicious application can write data to your terminal (for example,
       if you merely `cat' a file owned by someone else on the server
       machine), it can change your window title (unless you have disabled
       this as mentioned in section 4.6.5) and then use this service to
       have the new window title sent back to the server as if typed at the
       keyboard. This allows an attacker to fake keypresses and potentially
       cause your server-side applications to do things you didn't want.
       Therefore this feature is disabled by default, and we recommend you
       do not set it to `Window title' unless you _really_ know what you
       are doing.

       There are three settings for this option:

       `None'

           PuTTY makes no response whatsoever to the relevant escape
           sequence. This may upset server-side software that is expecting
           some sort of response.

       `Empty string'

           PuTTY makes a well-formed response, but leaves it blank. Thus,
           server-side software that expects a response is kept happy,
           but an attacker cannot influence the response string. This is
           probably the setting you want if you have no better ideas.

       `Window title'

           PuTTY responds with the actual window title. This is dangerous
           for the reasons described above.

 4.6.7 Disabling remote scrollback clearing

       PuTTY has the ability to clear the terminal's scrollback buffer in
       response to a command from the server. If you find PuTTY is doing
       this unexpectedly or inconveniently, you can tell PuTTY not to
       respond to that server command.

 4.6.8 Disabling destructive backspace

       Normally, when PuTTY receives character 127 (^?) from the server,
       it will perform a `destructive backspace': move the cursor one
       space left and delete the character under it. This can apparently
       cause problems in some applications, so PuTTY provides the ability
       to configure character 127 to perform a normal backspace (without
       deleting a character) instead.

 4.6.9 Disabling remote character set configuration

       PuTTY has the ability to change its character set configuration
       in response to commands from the server. Some programs send these
       commands unexpectedly or inconveniently. In particular, BitchX (an
       IRC client) seems to have a habit of reconfiguring the character set
       to something other than the user intended.

       If you find that accented characters are not showing up the way you
       expect them to, particularly if you're running BitchX, you could try
       disabling the remote character set configuration commands.

4.6.10 Disabling Arabic text shaping

       PuTTY supports shaping of Arabic text, which means that if your
       server sends text written in the basic Unicode Arabic alphabet then
       it will convert it to the correct display forms before printing it
       on the screen.

       If you are using full-screen software which was not expecting
       this to happen (especially if you are not an Arabic speaker and
       you unexpectedly find yourself dealing with Arabic text files in
       applications which are not Arabic-aware), you might find that the
       display becomes corrupted. By ticking this box, you can disable
       Arabic text shaping so that PuTTY displays precisely the characters
       it is told to display.

       You may also find you need to disable bidirectional text display;
       see section 4.6.11.

4.6.11 Disabling bidirectional text display

       PuTTY supports bidirectional text display, which means that if your
       server sends text written in a language which is usually displayed
       from right to left (such as Arabic or Hebrew) then PuTTY will
       automatically flip it round so that it is displayed in the right
       direction on the screen.

       If you are using full-screen software which was not expecting
       this to happen (especially if you are not an Arabic speaker and
       you unexpectedly find yourself dealing with Arabic text files in
       applications which are not Arabic-aware), you might find that the
       display becomes corrupted. By ticking this box, you can disable
       bidirectional text display, so that PuTTY displays text from left to
       right in all situations.

       You may also find you need to disable Arabic text shaping; see
       section 4.6.10.

4.6.12 Disabling bracketed paste mode

       By default, when you paste text into the terminal window, it's sent
       to the server as terminal input, exactly as if you'd typed the same
       text into the terminal window using the keyboard (except that it's
       all sent at once, much faster than you could type it).

       However, a terminal application can change that, by asking the
       terminal to enable `bracketed paste mode'. In this mode, pasted data
       is marked in the input stream, by sending a special control sequence
       before the paste, and another one at the end.

       A terminal application can use this information to treat pasted data
       differently from keyboard input. For example, a terminal-based text
       editor can treat the input as literal data, even if some of its
       characters would normally trigger special editor functions. A shell
       can treat pasted input as less trusted, in case another application
       somehow sneaked a malicious shell command into your clipboard:
       modern versions of bash will highlight pasted data on the command
       line, and not run it until you've confirmed it by pressing Return,
       even if the pasted data contained a newline character.

       In edge cases, it's possible that bracketed paste mode introduces
       bigger problems than the ones it solves. So you can use this
       checkbox to turn it off completely. If you do that, then PuTTY will
       always send your paste data exactly as if it had been typed at the
       keyboard, whether or not the server asked for bracketed paste mode.

   4.7 The Window panel

       The Window configuration panel allows you to control aspects of the
       PuTTY window.

 4.7.1 Setting the size of the PuTTY window

       The `Columns' and `Rows' boxes let you set the PuTTY window to a
       precise size. Of course you can also drag the window to a new size
       while a session is running.

 4.7.2 What to do when the window is resized

       These options allow you to control what happens when the user tries
       to resize the PuTTY window using its window furniture.

       There are four options here:

        -  `Change the number of rows and columns': the font size will not
           change. (This is the default.)

        -  `Change the size of the font': the number of rows and columns in
           the terminal will stay the same, and the font size will change.

        -  `Change font size when maximised': when the window is resized,
           the number of rows and columns will change, _except_ when the
           window is maximised (or restored), when the font size will
           change. (In this mode, holding down the Alt key while resizing
           will also cause the font size to change.)

        -  `Forbid resizing completely': the terminal will refuse to be
           resized at all.

 4.7.3 Controlling scrollback

       These options let you configure the way PuTTY keeps text after it
       scrolls off the top of the screen (see section 3.1.2).

       The `Lines of scrollback' box lets you configure how many lines of
       text PuTTY keeps. The `Display scrollbar' options allow you to hide
       the scrollbar (although you can still view the scrollback using
       the keyboard as described in section 3.1.2). You can separately
       configure whether the scrollbar is shown in full-screen mode and in
       normal modes.

       If you are viewing part of the scrollback when the server sends
       more text to PuTTY, the screen will revert to showing the current
       terminal contents. You can disable this behaviour by turning off
       `Reset scrollback on display activity'. You can also make the screen
       revert when you press a key, by turning on `Reset scrollback on
       keypress'.

 4.7.4 `Push erased text into scrollback'

       When this option is enabled, the contents of the terminal screen
       will be pushed into the scrollback when a server-side application
       clears the screen, so that your scrollback will contain a better
       record of what was on your screen in the past.

       If the application switches to the alternate screen (see section
       4.6.4 for more about this), then the contents of the primary screen
       will be visible in the scrollback until the application switches
       back again.

       This option is enabled by default.

   4.8 The Appearance panel

       The Appearance configuration panel allows you to control aspects of
       the appearance of PuTTY's window.

 4.8.1 Controlling the appearance of the cursor

       The `Cursor appearance' option lets you configure the cursor to be a
       block, an underline, or a vertical line. A block cursor becomes an
       empty box when the window loses focus; an underline or a vertical
       line becomes dotted.

       The `Cursor blinks' option makes the cursor blink on and off. This
       works in any of the cursor modes.

 4.8.2 Controlling the font used in the terminal window

       This option allows you to choose what font, in what size, the PuTTY
       terminal window uses to display the text in the session.

       By default, you will be offered a choice from all the fixed-width
       fonts installed on the system, since VT100-style terminal handling
       expects a fixed-width font. If you tick the box marked `Allow
       selection of variable-pitch fonts', however, PuTTY will offer
       variable-width fonts as well: if you select one of these, the font
       will be coerced into fixed-size character cells, which will probably
       not look very good (but can work OK with some fonts).

 4.8.3 `Hide mouse pointer when typing in window'

       If you enable this option, the mouse pointer will disappear if the
       PuTTY window is selected and you press a key. This way, it will
       not obscure any of the text in the window while you work in your
       session. As soon as you move the mouse, the pointer will reappear.

       This option is disabled by default, so the mouse pointer remains
       visible at all times.

 4.8.4 Controlling the window border

       PuTTY allows you to configure the appearance of the window border to
       some extent.

       The checkbox marked `Sunken-edge border' changes the appearance of
       the window border to something more like a DOS box: the inside edge
       of the border is highlighted as if it sank down to meet the surface
       inside the window. This makes the border a little bit thicker as
       well. It's hard to describe well. Try it and see if you like it.

       You can also configure a completely blank gap between the text in
       the window and the border, using the `Gap between text and window
       edge' control. By default this is set at one pixel. You can reduce
       it to zero, or increase it further.

   4.9 The Behaviour panel

       The Behaviour configuration panel allows you to control aspects of
       the behaviour of PuTTY's window.

 4.9.1 Controlling the window title

       The `Window title' edit box allows you to set the title of the PuTTY
       window. By default the window title will contain the host name
       followed by `PuTTY', for example `server1.example.com - PuTTY'. If
       you want a different window title, this is where to set it.

       PuTTY allows the server to send `xterm' control sequences which
       modify the title of the window in mid-session (unless this is
       disabled - see section 4.6.5); the title string set here is
       therefore only the _initial_ window title.

       As well as the _window_ title, there is also an `xterm' sequence
       to modify the title of the window's _icon_. This makes sense in a
       windowing system where the window becomes an icon when minimised,
       such as Windows 3.1 or most X Window System setups; but in the
       Windows 95-like user interface it isn't as applicable.

       By default, PuTTY only uses the server-supplied _window_ title,
       and ignores the icon title entirely. If for some reason you want
       to see both titles, check the box marked `Separate window and icon
       titles'. If you do this, PuTTY's window title and Taskbar caption
       will change into the server-supplied icon title if you minimise the
       PuTTY window, and change back to the server-supplied window title if
       you restore it. (If the server has not bothered to supply a window
       or icon title, none of this will happen.)

 4.9.2 `Warn before closing window'

       If you press the Close button in a PuTTY window that contains a
       running session, PuTTY will put up a warning window asking if you
       really meant to close the window. A window whose session has already
       terminated can always be closed without a warning.

       If you want to be able to close a window quickly, you can disable
       the `Warn before closing window' option.

 4.9.3 `Window closes on ALT-F4'

       By default, pressing ALT-F4 causes the window to close (or a warning
       box to appear; see section 4.9.2). If you disable the `Window closes
       on ALT-F4' option, then pressing ALT-F4 will simply send a key
       sequence to the server.

 4.9.4 `System menu appears on ALT-Space'

       If this option is enabled, then pressing ALT-Space will bring up the
       PuTTY window's menu, like clicking on the top left corner. If it is
       disabled, then pressing ALT-Space will just send `ESC SPACE' to the
       server.

       Some accessibility programs for Windows may need this option
       enabling to be able to control PuTTY's window successfully. For
       instance, Dragon NaturallySpeaking requires it both to open the
       system menu via voice, and to close, minimise, maximise and restore
       the window.

 4.9.5 `System menu appears on Alt alone'

       If this option is enabled, then pressing and releasing ALT will
       bring up the PuTTY window's menu, like clicking on the top left
       corner. If it is disabled, then pressing and releasing ALT will have
       no effect.

 4.9.6 `Ensure window is always on top'

       If this option is enabled, the PuTTY window will stay on top of all
       other windows.

 4.9.7 `Full screen on Alt-Enter'

       If this option is enabled, then pressing Alt-Enter will cause the
       PuTTY window to become full-screen. Pressing Alt-Enter again will
       restore the previous window size.

       The full-screen feature is also available from the System menu, even
       when it is configured not to be available on the Alt-Enter key. See
       section 3.1.3.7.

  4.10 The Translation panel

       The Translation configuration panel allows you to control the
       translation between the character set understood by the server and
       the character set understood by PuTTY.

4.10.1 Controlling character set translation

       During an interactive session, PuTTY receives a stream of 8-bit
       bytes from the server, and in order to display them on the screen it
       needs to know what character set to interpret them in. Similarly,
       PuTTY needs to know how to translate your keystrokes into the
       encoding the server expects. Unfortunately, there is no satisfactory
       mechanism for PuTTY and the server to communicate this information,
       so it must usually be manually configured.

       There are a lot of character sets to choose from. The `Remote
       character set' option lets you select one.

       By default PuTTY will use the UTF-8 encoding of Unicode, which can
       represent pretty much any character; data coming from the server
       is interpreted as UTF-8, and keystrokes are sent UTF-8 encoded.
       This is what most modern distributions of Linux will expect by
       default. However, if this is wrong for your server, you can select a
       different character set using this control.

       A few other notable character sets are:

        -  The ISO-8859 series are all standard character sets that include
           various accented characters appropriate for different sets of
           languages.

        -  The Win125x series are defined by Microsoft, for similar
           purposes. In particular Win1252 is almost equivalent to ISO-
           8859-1, but contains a few extra characters such as matched
           quotes and the Euro symbol.

        -  If you want the old IBM PC character set with block graphics and
           line-drawing characters, you can select `CP437'.

       If you need support for a numeric code page which is not listed in
       the drop-down list, such as code page 866, then you can try entering
       its name manually (`CP866' for example) in the list box. If the
       underlying version of Windows has the appropriate translation table
       installed, PuTTY will use it.

4.10.2 `Treat CJK ambiguous characters as wide'

       There are some Unicode characters whose width is not well-defined.
       In most contexts, such characters should be treated as single-
       width for the purposes of wrapping and so on; however, in some CJK
       contexts, they are better treated as double-width for historical
       reasons, and some server-side applications may expect them to be
       displayed as such. Setting this option will cause PuTTY to take the
       double-width interpretation.

       If you use legacy CJK applications, and you find your lines are
       wrapping in the wrong places, or you are having other display
       problems, you might want to play with this setting.

       This option only has any effect in UTF-8 mode (see section 4.10.1).

4.10.3 `Caps Lock acts as Cyrillic switch'

       This feature allows you to switch between a US/UK keyboard layout
       and a Cyrillic keyboard layout by using the Caps Lock key, if you
       need to type (for example) Russian and English side by side in the
       same document.

       Currently this feature is not expected to work properly if your
       native keyboard layout is not US or UK.

4.10.4 Controlling display of line-drawing characters

       VT100-series terminals allow the server to send control sequences
       that shift temporarily into a separate character set for drawing
       simple lines and boxes. However, there are a variety of ways in
       which PuTTY can attempt to find appropriate characters, and the
       right one to use depends on the locally configured font. In general
       you should probably try lots of options until you find one that your
       particular font supports.

        -  `Use Unicode line drawing code points' tries to use the box
           characters that are present in Unicode. For good Unicode-
           supporting fonts this is probably the most reliable and
           functional option.

        -  `Poor man's line drawing' assumes that the font _cannot_
           generate the line and box characters at all, so it will use the
           `+', `-' and `|' characters to draw approximations to boxes. You
           should use this option if none of the other options works.

        -  `Font has XWindows encoding' is for use with fonts that have a
           special encoding, where the lowest 32 character positions (below
           the ASCII printable range) contain the line-drawing characters.
           This is unlikely to be the case with any standard Windows font;
           it will probably only apply to custom-built fonts or fonts that
           have been automatically converted from the X Window System.

        -  `Use font in both ANSI and OEM modes' tries to use the same font
           in two different character sets, to obtain a wider range of
           characters. This doesn't always work; some fonts claim to be a
           different size depending on which character set you try to use.

        -  `Use font in OEM mode only' is more reliable than that, but can
           miss out other characters from the main character set.

4.10.5 Controlling copy and paste of line drawing characters

       By default, when you copy and paste a piece of the PuTTY screen that
       contains VT100 line and box drawing characters, PuTTY will paste
       them in the form they appear on the screen: either Unicode line
       drawing code points, or the `poor man's' line-drawing characters
       `+', `-' and `|'. The checkbox `Copy and paste VT100 line drawing
       chars as lqqqk' disables this feature, so line-drawing characters
       will be pasted as the ASCII characters that were printed to produce
       them. This will typically mean they come out mostly as `q' and `x',
       with a scattering of `jklmntuvw' at the corners. This might be
       useful if you were trying to recreate the same box layout in another
       program, for example.

       Note that this option only applies to line-drawing characters which
       _were_ printed by using the VT100 mechanism. Line-drawing characters
       that were received as Unicode code points will paste as Unicode
       always.

4.10.6 Combining VT100 line-drawing with UTF-8

       If PuTTY is configured to treat data from the server as encoded in
       UTF-8, then by default it disables the older VT100-style system
       of control sequences that cause the lower-case letters to be
       temporarily replaced by line drawing characters.

       The rationale is that in UTF-8 mode you don't need those control
       sequences anyway, because all the line-drawing characters they
       access are available as Unicode characters already, so there's no
       need for applications to put the terminal into a special state to
       get at them.

       Also, it removes a risk of the terminal _accidentally_ getting into
       that state: if you accidentally write uncontrolled binary data to a
       non-UTF-8 terminal, it can be surprisingly common to find that your
       next shell prompt appears as a sequence of line-drawing characters
       and then you have to remember or look up how to get out of that
       mode. So by default, UTF-8 mode simply doesn't _have_ a confusing
       mode like that to get into, accidentally or on purpose.

       However, not all applications will see it that way. Even UTF-8
       terminal users will still sometimes have to run software that tries
       to print line-drawing characters in the old-fashioned way. So the
       configuration option `Enable VT100 line drawing even in UTF-8 mode'
       puts PuTTY into a hybrid mode in which it understands the VT100-
       style control sequences that change the meaning of the ASCII lower
       case letters, _and_ understands UTF-8.

  4.11 The Selection panel

       The Selection panel allows you to control the way copy and paste
       work in the PuTTY window.

4.11.1 Changing the actions of the mouse buttons

       PuTTY's copy and paste mechanism is by default modelled on the Unix
       `xterm' application. The X Window System uses a three-button mouse,
       and the convention in that system is that the left button selects,
       the right button extends an existing selection, and the middle
       button pastes.

       Windows often only has two mouse buttons, so when run on
       Windows, PuTTY is configurable. In PuTTY's default configuration
       (`Compromise'), the _right_ button pastes, and the _middle_ button
       (if you have one) extends a selection.

       If you have a three-button mouse and you are already used to the
       `xterm' arrangement, you can select it using the `Action of mouse
       buttons' control.

       Alternatively, with the `Windows' option selected, the middle button
       extends, and the right button brings up a context menu (on which one
       of the options is `Paste'). (This context menu is always available
       by holding down Ctrl and right-clicking, regardless of the setting
       of this option.)

       (When PuTTY itself is running on Unix, it follows the X Window
       System convention.)

4.11.2 `Shift overrides application's use of mouse'

       PuTTY allows the server to send control codes that let it take
       over the mouse and use it for purposes other than copy and paste.
       Applications which use this feature include the text-mode web
       browser `links', the Usenet newsreader `trn' version 4, and the file
       manager `mc' (Midnight Commander).

       When running one of these applications, pressing the mouse buttons
       no longer performs copy and paste. If you do need to copy and paste,
       you can still do so if you hold down Shift while you do your mouse
       clicks.

       However, it is possible in theory for applications to even detect
       and make use of Shift + mouse clicks. We don't know of any
       applications that do this, but in case someone ever writes one,
       unchecking the `Shift overrides application's use of mouse' checkbox
       will cause Shift + mouse clicks to go to the server as well (so that
       mouse-driven copy and paste will be completely disabled).

       If you want to prevent the application from taking over the mouse at
       all, you can do this using the Features control panel; see section
       4.6.2.

4.11.3 Default selection mode

       As described in section 3.1.1, PuTTY has two modes of selecting
       text to be copied to the clipboard. In the default mode (`Normal'),
       dragging the mouse from point A to point B selects to the end of
       the line containing A, all the lines in between, and from the very
       beginning of the line containing B. In the other mode (`Rectangular
       block'), dragging the mouse between two points defines a rectangle,
       and everything within that rectangle is copied.

       Normally, you have to hold down Alt while dragging the mouse to
       select a rectangular block. Using the `Default selection mode'
       control, you can set rectangular selection as the default, and then
       you have to hold down Alt to get the _normal_ behaviour.

4.11.4 Assigning copy and paste actions to clipboards

       Here you can configure which clipboard(s) are written or read by
       PuTTY's various copy and paste actions.

       Most platforms, including Windows, have a single system clipboard.
       On these platforms, PuTTY provides a second clipboard-like
       facility by permitting you to paste the text you last selected in
       _this window_, whether or not it is currently also in the system
       clipboard. This is not enabled by default.

       The X Window System (which underlies most Unix graphical
       interfaces) provides multiple clipboards (or `selections'), and
       many applications support more than one of them by a different user
       interface mechanism. When PuTTY itself is running on Unix, it has
       more configurability relating to these selections.

       The two most commonly used selections are called `PRIMARY' and
       `CLIPBOARD'; in applications supporting both, the usual behaviour
       is that PRIMARY is used by mouse-only actions (selecting text
       automatically copies it to PRIMARY, and middle-clicking pastes from
       PRIMARY), whereas CLIPBOARD is used by explicit Copy and Paste menu
       items or keypresses such as Ctrl-C and Ctrl-V.

4.11.4.1 `Auto-copy selected text'

       The checkbox `Auto-copy selected text to system clipboard' controls
       whether or not selecting text in the PuTTY terminal window
       automatically has the side effect of copying it to the system
       clipboard, without requiring a separate user interface action.

       On X, the wording of this option is changed slightly so that
       `CLIPBOARD' is mentioned in place of the `system clipboard'. Text
       selected in the terminal window will _always_ be automatically
       placed in the PRIMARY selection, as is conventional, but if you tick
       this box, it will _also_ be placed in `CLIPBOARD' at the same time.

4.11.4.2 Choosing a clipboard for UI actions

       PuTTY has three user-interface actions which can be configured to
       paste into the terminal (not counting menu items). You can click
       whichever mouse button (if any) is configured to paste (see section
       4.11.1); you can press Shift-Ins; or you can press Ctrl-Shift-V,
       although that action is not enabled by default.

       You can configure which of the available clipboards each of these
       actions pastes from (including turning the paste action off
       completely). On platforms with a single system clipboard (such as
       Windows), the available options are to paste from that clipboard
       or to paste from PuTTY's internal memory of the last selected text
       within that window. On X, the standard options are CLIPBOARD or
       PRIMARY.

       (PRIMARY is conceptually similar in that it _also_ refers to the
       last selected text - just across all applications instead of just
       this window.)

       The two keyboard options each come with a corresponding key to copy
       _to_ the same clipboard. Whatever you configure Shift-Ins to paste
       from, Ctrl-Ins will copy to the same location; similarly, Ctrl-
       Shift-C will copy to whatever Ctrl-Shift-V pastes from.

       On X, you can also enter a selection name of your choice. For
       example, there is a rarely-used standard selection called
       `SECONDARY', which Emacs (for example) can work with if you hold
       down the Meta key while dragging to select or clicking to paste; if
       you configure a PuTTY keyboard action to access this clipboard, then
       you can interoperate with other applications' use of it. Another
       thing you could do would be to invent a clipboard name yourself, to
       create a special clipboard shared _only_ between instances of PuTTY,
       or between just instances configured in that particular way.

4.11.5 `Permit control characters in pasted text'

       It is possible for the clipboard to contain not just text (with
       newlines and tabs) but also control characters such as ESC which
       could have surprising effects if pasted into a terminal session,
       depending on what program is running on the server side. Copying
       text from a mischievous web page could put such characters onto the
       clipboard.

       By default, PuTTY filters out the more unusual control characters,
       only letting through the more obvious text-formatting characters
       (newlines, tab, backspace, and DEL).

       Setting this option stops this filtering; on paste, any character
       on the clipboard is sent to the session uncensored. This might be
       useful if you are deliberately using control character pasting as a
       simple form of scripting, for instance.

  4.12 The Copy panel

       The Copy configuration panel controls behaviour specifically related
       to copying from the terminal window to the clipboard.

4.12.1 Character classes

       PuTTY will select a word at a time in the terminal window if you
       double-click to begin the drag. This section allows you to control
       precisely what is considered to be a word.

       Each character is given a _class_, which is a small number
       (typically 0, 1 or 2). PuTTY considers a single word to be any
       number of adjacent characters in the same class. So by modifying the
       assignment of characters to classes, you can modify the word-by-word
       selection behaviour.

       In the default configuration, the character classes are:

        -  Class 0 contains white space and control characters.

        -  Class 1 contains most punctuation.

        -  Class 2 contains letters, numbers and a few pieces of
           punctuation (the double quote, minus sign, period, forward slash
           and underscore).

       So, for example, if you assign the `@' symbol into character class
       2, you will be able to select an e-mail address with just a double
       click.

       In order to adjust these assignments, you start by selecting a group
       of characters in the list box. Then enter a class number in the edit
       box below, and press the `Set' button.

       This mechanism currently only covers ASCII characters, because it
       isn't feasible to expand the list to cover the whole of Unicode.

       Character class definitions can be modified by control sequences
       sent by the server. This configuration option controls the _default_
       state, which will be restored when you reset the terminal (see
       section 3.1.3.6). However, if you modify this option in mid-session
       using `Change Settings', it will take effect immediately.

4.12.2 Copying in Rich Text Format

       If you enable `Copy to clipboard in RTF as well as plain text',
       PuTTY will write formatting information to the clipboard as well
       as the actual text you copy. The effect of this is that if you
       paste into (say) a word processor, the text will appear in the word
       processor in the same font, colour, and style (e.g. bold, underline)
       PuTTY was using to display it.

       This option can easily be inconvenient, so by default it is
       disabled.

  4.13 The Colours panel

       The Colours panel allows you to control PuTTY's use of colour.

4.13.1 `Allow terminal to specify ANSI colours'

       This option is enabled by default. If it is disabled, PuTTY will
       ignore any control sequences sent by the server to request coloured
       text.

       If you have a particularly garish application, you might want to
       turn this option off and make PuTTY only use the default foreground
       and background colours.

4.13.2 `Allow terminal to use xterm 256-colour mode'

       This option is enabled by default. If it is disabled, PuTTY will
       ignore any control sequences sent by the server which use the
       extended 256-colour mode supported by recent versions of xterm.

       If you have an application which is supposed to use 256-colour mode
       and it isn't working, you may find you need to tell your server that
       your terminal supports 256 colours. On Unix, you do this by ensuring
       that the setting of TERM describes a 256-colour-capable terminal.
       You can check this using a command such as `infocmp':

         $ infocmp | grep colors
                 colors#256, cols#80, it#8, lines#24, pairs#256,

       If you do not see `colors#256' in the output, you may need to change
       your terminal setting. On modern Linux machines, you could try
       `xterm-256color'.

4.13.3 `Allow terminal to use 24-bit colour'

       This option is enabled by default. If it is disabled, PuTTY will
       ignore any control sequences sent by the server which use the
       control sequences supported by modern terminals to specify arbitrary
       24-bit RGB colour value.

4.13.4 `Indicate bolded text by changing...'

       When the server sends a control sequence indicating that some text
       should be displayed in bold, PuTTY can handle this in several ways.
       It can either change the font for a bold version, or use the same
       font in a brighter colour, or it can do both (brighten the colour
       _and_ embolden the font). This control lets you choose which.

       By default bold is indicated by colour, so non-bold text is
       displayed in light grey and bold text is displayed in bright white
       (and similarly in other colours). If you change the setting to `The
       font' box, bold and non-bold text will be displayed in the same
       colour, and instead the font will change to indicate the difference.
       If you select `Both', the font and the colour will both change.

       Some applications rely on `bold black' being distinguishable from a
       black background; if you choose `The font', their text may become
       invisible.

4.13.5 `Attempt to use logical palettes'

       Logical palettes are a mechanism by which a Windows application
       running on an 8-bit colour display can select precisely the colours
       it wants instead of going with the Windows standard defaults.

       If you are not getting the colours you ask for on an 8-bit display,
       you can try enabling this option. However, be warned that it's never
       worked very well.

4.13.6 `Use system colours'

       Enabling this option will cause PuTTY to ignore the configured
       colours for `Default Background/Foreground' and `Cursor Colour/Text'
       (see section 4.13.7), instead going with the system-wide defaults.

       Note that non-bold and bold text will be the same colour if this
       option is enabled. You might want to change to indicating bold text
       by font changes (see section 4.13.4).

4.13.7 Adjusting the colours in the terminal window

       The main colour control allows you to specify exactly what colours
       things should be displayed in. To modify one of the PuTTY colours,
       use the list box to select which colour you want to modify. The
       RGB values for that colour will appear on the right-hand side of
       the list box. Now, if you press the `Modify' button, you will be
       presented with a colour selector, in which you can choose a new
       colour to go in place of the old one. (You may also edit the RGB
       values directly in the edit boxes, if you wish; each value is an
       integer from 0 to 255.)

       PuTTY allows you to set the cursor colour, the default foreground
       and background, and the precise shades of all the ANSI configurable
       colours (black, red, green, yellow, blue, magenta, cyan, and white).
       You can also modify the precise shades used for the bold versions
       of these colours; these are used to display bold text if you have
       chosen to indicate that by colour (see section 4.13.4), and can also
       be used if the server asks specifically to use them. (Note that
       `Default Bold Background' is _not_ the background colour used for
       bold text; it is only used if the server specifically asks for a
       bold background.)

  4.14 The Connection panel

       The Connection panel allows you to configure options that apply to
       more than one type of connection.

4.14.1 Using keepalives to prevent disconnection

       If you find your sessions are closing unexpectedly (most often with
       `Connection reset by peer') after they have been idle for a while,
       you might want to try using this option.

       Some network routers and firewalls need to keep track of all
       connections through them. Usually, these firewalls will assume a
       connection is dead if no data is transferred in either direction
       after a certain time interval. This can cause PuTTY sessions to be
       unexpectedly closed by the firewall if no traffic is seen in the
       session for some time.

       The keepalive option (`Seconds between keepalives') allows you
       to configure PuTTY to send data through the session at regular
       intervals, in a way that does not disrupt the actual terminal
       session. If you find your firewall is cutting idle connections off,
       you can try entering a non-zero value in this field. The value
       is measured in seconds; so, for example, if your firewall cuts
       connections off after ten minutes then you might want to enter 300
       seconds (5 minutes) in the box.

       Note that keepalives are not always helpful. They help if you have
       a firewall which drops your connection after an idle period; but
       if the network between you and the server suffers from breaks in
       connectivity then keepalives can actually make things worse. If a
       session is idle, and connectivity is temporarily lost between the
       endpoints, but the connectivity is restored before either side
       tries to send anything, then there will be no problem - neither
       endpoint will notice that anything was wrong. However, if one side
       does send something during the break, it will repeatedly try to
       re-send, and eventually give up and abandon the connection. Then
       when connectivity is restored, the other side will find that the
       first side doesn't believe there is an open connection any more.
       Keepalives can make this sort of problem worse, because they
       increase the probability that PuTTY will attempt to send data during
       a break in connectivity. (Other types of periodic network activity
       can cause this behaviour; in particular, SSH-2 re-keys can have this
       effect. See section 4.18.2.)

       Therefore, you might find that keepalives help connection loss,
       or you might find they make it worse, depending on what _kind_ of
       network problems you have between you and the server.

       Keepalives are only supported in Telnet and SSH; the Rlogin, SUPDUP,
       and Raw protocols offer no way of implementing them. (For an
       alternative, see section 4.14.3.)

       Note that if you are using SSH-1 and the server has a bug that makes
       it unable to deal with SSH-1 ignore messages (see section 4.27.14),
       enabling keepalives will have no effect.

4.14.2 `Disable Nagle's algorithm'

       Nagle's algorithm is a detail of TCP/IP implementations that tries
       to minimise the number of small data packets sent down a network
       connection. With Nagle's algorithm enabled, PuTTY's bandwidth usage
       will be slightly more efficient; with it disabled, you may find you
       get a faster response to your keystrokes when connecting to some
       types of server.

       The Nagle algorithm is disabled by default for interactive
       connections.

4.14.3 `Enable TCP keepalives'

       _NOTE:_ TCP keepalives should not be confused with the application-
       level keepalives described in section 4.14.1. If in doubt, you
       probably want application-level keepalives; TCP keepalives are
       provided for completeness.

       The idea of TCP keepalives is similar to application-level
       keepalives, and the same caveats apply. The main differences are:

        -  TCP keepalives are available on _all_ network connection types,
           including Raw, Rlogin, and SUPDUP.

        -  The interval between TCP keepalives is usually much longer,
           typically two hours; this is set by the operating system, and
           cannot be configured within PuTTY.

        -  If the operating system does not receive a response to a
           keepalive, it may send out more in quick succession and
           terminate the connection if no response is received.

       TCP keepalives may be more useful for ensuring that half-open
       connections are terminated than for keeping a connection alive.

       TCP keepalives are disabled by default.

4.14.4 `Internet protocol version'

       This option allows the user to select between the old and new
       Internet protocols and addressing schemes (IPv4 and IPv6). The
       selected protocol will be used for most outgoing network connections
       (including connections to proxies); however, tunnels have their own
       configuration, for which see section 4.26.2.

       The default setting is `Auto', which means PuTTY will do something
       sensible and try to guess which protocol you wanted. (If you specify
       a literal Internet address, it will use whichever protocol that
       address implies. If you provide a hostname, it will see what kinds
       of address exist for that hostname; it will use IPv6 if there is an
       IPv6 address available, and fall back to IPv4 if not.)

       If you need to force PuTTY to use a particular protocol, you can
       explicitly set this to `IPv4' or `IPv6'.

4.14.5 `Logical name of remote host'

       This allows you to tell PuTTY that the host it will really end up
       connecting to is different from where it thinks it is making a
       network connection.

       You might use this, for instance, if you had set up an SSH port
       forwarding in one PuTTY session so that connections to some
       arbitrary port (say, localhost port 10022) were forwarded to a
       second machine's SSH port (say, foovax port 22), and then started a
       second PuTTY connecting to the forwarded port.

       In normal usage, the second PuTTY will access the host key cache
       under the host name and port it actually connected to (i.e.
       localhost port 10022 in this example). Using the logical host name
       option, however, you can configure the second PuTTY to cache the
       host key under the name of the host _you_ know that it's _really_
       going to end up talking to (here `foovax').

       This can be useful if you expect to connect to the same actual
       server through many different channels (perhaps because your port
       forwarding arrangements keep changing): by consistently setting the
       logical host name, you can arrange that PuTTY will not keep asking
       you to reconfirm its host key. Conversely, if you expect to use the
       same local port number for port forwardings to lots of different
       servers, you probably didn't want any particular server's host
       key cached under that local port number. (For this latter case,
       you could instead explicitly configure host keys in the relevant
       sessions; see section 4.19.3.)

       If you just enter a host name for this option, PuTTY will cache the
       SSH host key under the default SSH port for that host, irrespective
       of the port you really connected to (since the typical scenario is
       like the above example: you connect to a silly real port number and
       your connection ends up forwarded to the normal port-22 SSH server
       of some other machine). To override this, you can append a port
       number to the logical host name, separated by a colon. E.g. entering
       `foovax:2200' as the logical host name will cause the host key to be
       cached as if you had connected to port 2200 of `foovax'.

       If you provide a host name using this option, it is also displayed
       in other locations which contain the remote host name, such as the
       default window title and the default SSH password prompt. This
       reflects the fact that this is the host you're _really_ connecting
       to, which is more important than the mere means you happen to be
       using to contact that host. (This applies even if you're using a
       protocol other than SSH.)

  4.15 The Data panel

       The Data panel allows you to configure various pieces of data which
       can be sent to the server to affect your connection at the far end.

       Each option on this panel applies to more than one protocol.
       Options which apply to only one protocol appear on that protocol's
       configuration panels.

4.15.1 `Auto-login username'

       All three of the SSH, Telnet, and Rlogin protocols allow you to
       specify what user name you want to log in as, without having to type
       it explicitly every time. (Some Telnet servers don't support this.)

       In this box you can type that user name.

4.15.2 Use of system username

       When the previous box (section 4.15.1) is left blank, by default,
       PuTTY will prompt for a username at the time you make a connection.

       In some environments, such as the networks of large organisations
       implementing single sign-on, a more sensible default may be to use
       the name of the user logged in to the local operating system (if
       any); this is particularly likely to be useful with GSSAPI key
       exchange and user authentication (see section 4.23 and section
       4.18.1.1). This control allows you to change the default behaviour.

       The current system username is displayed in the dialog as a
       convenience. It is not saved in the configuration; if a saved
       session is later used by a different user, that user's name will be
       used.

4.15.3 `Terminal-type string'

       Most servers you might connect to with PuTTY are designed to be
       connected to from lots of different types of terminal. In order to
       send the right control sequences to each one, the server will need
       to know what type of terminal it is dealing with. Therefore, each
       of the SSH, Telnet, and Rlogin protocols allow a text string to be
       sent down the connection describing the terminal. On a Unix server,
       this selects an entry from the `termcap' or `terminfo' database that
       tells applications what control sequences to send to the terminal,
       and what character sequences to expect the keyboard to generate.

       PuTTY attempts to emulate the Unix `xterm' program, and by default
       it reflects this by sending `xterm' as a terminal-type string. If
       you find this is not doing what you want - perhaps the remote system
       reports `Unknown terminal type' - you could try setting this to
       something different, such as `vt220'.

       If you're not sure whether a problem is due to the terminal type
       setting or not, you probably need to consult the manual for your
       application or your server.

4.15.4 `Terminal speeds'

       The Telnet, Rlogin, and SSH protocols allow the client to specify
       terminal speeds to the server.

       This parameter does _not_ affect the actual speed of the connection,
       which is always `as fast as possible'; it is just a hint that is
       sometimes used by server software to modify its behaviour. For
       instance, if a slow speed is indicated, the server may switch to a
       less bandwidth-hungry display mode.

       The value is usually meaningless in a network environment, but PuTTY
       lets you configure it, in case you find the server is reacting badly
       to the default value.

       The format is a pair of numbers separated by a comma, for instance,
       `38400,38400'. The first number represents the output speed (_from_
       the server) in bits per second, and the second is the input speed
       (_to_ the server). (Only the first is used in the Rlogin protocol.)

       This option has no effect on Raw connections.

4.15.5 Setting environment variables on the server

       The Telnet protocol provides a means for the client to pass
       environment variables to the server. Many Telnet servers have
       stopped supporting this feature due to security flaws, but PuTTY
       still supports it for the benefit of any servers which have found
       other ways around the security problems than just disabling the
       whole mechanism.

       Version 2 of the SSH protocol also provides a similar mechanism,
       which is easier to implement without security flaws. Newer SSH-2
       servers are more likely to support it than older ones.

       This configuration data is not used in the SSH-1, rlogin or raw
       protocols.

       To add an environment variable to the list transmitted down the
       connection, you enter the variable name in the `Variable' box, enter
       its value in the `Value' box, and press the `Add' button. To remove
       one from the list, select it in the list box and press `Remove'.

  4.16 The Proxy panel

       The Proxy panel allows you to configure PuTTY to use various types
       of proxy in order to make its network connections. The settings in
       this panel affect the primary network connection forming your PuTTY
       session, and also any extra connections made as a result of SSH port
       forwarding (see section 3.5).

       Note that unlike some software (such as web browsers), PuTTY does
       not attempt to automatically determine whether to use a proxy and
       (if so) which one to use for a given destination. If you need to use
       a proxy, it must always be explicitly configured.

4.16.1 Setting the proxy type

       The `Proxy type' drop-down allows you to configure what type of
       proxy you want PuTTY to use for its network connections. The default
       setting is `None'; in this mode no proxy is used for any connection.

        -  Selecting `HTTP CONNECT' allows you to proxy your connections
           through a web server supporting the HTTP CONNECT command, as
           documented in RFC 2817.

        -  Selecting `SOCKS 4' or `SOCKS 5' allows you to proxy your
           connections through a SOCKS server.

        -  Many firewalls implement a less formal type of proxy in
           which a user can make a Telnet or TCP connection directly
           to the firewall machine and enter a command such as
           `connect myhost.com 22' to connect through to an external host.
           Selecting `Telnet' allows you to tell PuTTY to use this type
           of proxy, with the precise command specified as described in
           section 4.16.5.

        -  There are several ways to use a SSH server as a proxy. All of
           these cause PuTTY to make a secondary SSH connection to the
           proxy host (sometimes called a `jump host' in this context).

           The `Proxy hostname' field will be interpreted as the name of a
           PuTTY saved session if one exists, or a hostname if not. This
           allows multi-hop jump paths, if the referenced saved session is
           itself configured to use an SSH proxy; and it allows combining
           SSH and non-SSH proxying.

            -  `SSH to proxy and use port forwarding' causes PuTTY to use
               the secondary SSH connection to open a port-forwarding
               channel to the final destination host (similar to OpenSSH's
               -J option).

            -  `SSH to proxy and execute a command' causes PuTTY to run an
               arbitrary remote command on the proxy SSH server and use
               that command's standard input and output streams to run
               the primary connection over. The remote command line is
               specified as described in section 4.16.5.

            -  `SSH to proxy and invoke a subsystem' is similar but causes
               PuTTY to start an SSH `subsystem' rather than an ordinary
               command line. This might be useful with a specially set up
               SSH proxy server.

        -  Selecting `Local' allows you to specify an arbitrary command
           on the local machine to act as a proxy. When the session is
           started, instead of creating a TCP connection, PuTTY runs the
           command (specified in section 4.16.5), and uses its standard
           input and output streams.

           This could be used, for instance, to talk to some kind of
           network proxy that PuTTY does not natively support; or you could
           tunnel a connection over something other than TCP/IP entirely.

           You can also enable this mode on the command line; see section
           3.11.3.27.

4.16.2 Excluding parts of the network from proxying

       Typically you will only need to use a proxy to connect to non-local
       parts of your network; for example, your proxy might be required for
       connections outside your company's internal network. In the `Exclude
       Hosts/IPs' box you can enter ranges of IP addresses, or ranges of
       DNS names, for which PuTTY will avoid using the proxy and make a
       direct connection instead.

       The `Exclude Hosts/IPs' box may contain more than one exclusion
       range, separated by commas. Each range can be an IP address or a DNS
       name, with a `*' character allowing wildcards. For example:

         *.example.com

       This excludes any host with a name ending in `.example.com' from
       proxying.

         192.168.88.*

       This excludes any host with an IP address starting with 192.168.88
       from proxying.

         192.168.88.*,*.example.com

       This excludes both of the above ranges at once.

       Connections to the local host (the host name `localhost', and any
       loopback IP address) are never proxied, even if the proxy exclude
       list does not explicitly contain them. It is very unlikely that this
       behaviour would ever cause problems, but if it does you can change
       it by enabling `Consider proxying local host connections'.

       Note that if you are doing DNS at the proxy (see section 4.16.3),
       you should make sure that your proxy exclusion settings do not
       depend on knowing the IP address of a host. If the name is passed on
       to the proxy without PuTTY looking it up, it will never know the IP
       address and cannot check it against your list.

4.16.3 Name resolution when using a proxy

       If you are using a proxy to access a private network, it can make a
       difference whether DNS name resolution is performed by PuTTY itself
       (on the client machine) or performed by the proxy.

       The `Do DNS name lookup at proxy end' configuration option allows
       you to control this. If you set it to `No', PuTTY will always do its
       own DNS, and will always pass an IP address to the proxy. If you set
       it to `Yes', PuTTY will always pass host names straight to the proxy
       without trying to look them up first.

       If you set this option to `Auto' (the default), PuTTY will do
       something it considers appropriate for each type of proxy. Most
       types of proxy (HTTP, SOCK5, SSH, Telnet, and local) will have host
       names passed straight to them; SOCKS4 proxies will not.

       Note that if you are doing DNS at the proxy, you should make sure
       that your proxy exclusion settings (see section 4.16.2) do not
       depend on knowing the IP address of a host. If the name is passed on
       to the proxy without PuTTY looking it up, it will never know the IP
       address and cannot check it against your list.

       The original SOCKS 4 protocol does not support proxy-side DNS. There
       is a protocol extension (SOCKS 4A) which does support it, but not
       all SOCKS 4 servers provide this extension. If you enable proxy DNS
       and your SOCKS 4 server cannot deal with it, this might be why.

       If you want to avoid PuTTY making _any_ DNS query related to your
       destination host name (for example, because your local DNS resolver
       is very slow to return a negative response in that situation), then
       as well as setting this control to `Yes', you may also need to
       turn off GSSAPI authentication and GSSAPI key exchange in SSH (see
       section 4.23 and section 4.18.1.1 respectively). This is because
       GSSAPI setup also involves a DNS query for the destination host
       name, and that query is performed by the separate GSSAPI library, so
       PuTTY can't override or reconfigure it.

4.16.4 Username and password

       You can enter a username and a password in the `Username' and
       `Password' boxes, which will be used if your proxy requires
       authentication.

       Note that if you save your session, the proxy password will be saved
       in plain text, so anyone who can access your PuTTY configuration
       data will be able to discover it.

       If PuTTY discovers that it needs a proxy username or password
       and you have not specified one here, PuTTY will prompt for it
       interactively in the terminal window.

       Authentication is not fully supported for all forms of proxy:

        -  Username and password authentication is supported for HTTP
           proxies and SOCKS 5 proxies.

            -  With SOCKS 5, authentication is via CHAP if the proxy
               supports it (this is not supported in PuTTYtel); otherwise
               the password is sent to the proxy in plain text.

            -  With HTTP proxying, authentication is via `HTTP Digest'
               if possible (again, not supported in PuTTYtel), or `HTTP
               Basic'. In the latter case, the password is sent to the
               proxy in plain text.

        -  SOCKS 4 can use the `Username' field, but does not support
           passwords.

        -  SSH proxying can use all the same forms of SSH authentication
           supported by PuTTY for its main connection. If the SSH server
           requests password authentication, any configured proxy password
           will be used, but other authentication methods such as public
           keys and GSSAPI will be tried first, just as for a primary
           SSH connection, and if they require credentials such as a key
           passphrase, PuTTY will interactively prompt for these.

        -  You can specify a way to include a username and password in the
           Telnet/Local proxy command (see section 4.16.5). If you do so,
           and don't also specify the actual username and/or password in
           the configuration, PuTTY will interactively prompt for them.

4.16.5 Specifying the Telnet, SSH, or Local proxy command

       If you are using the Telnet proxy type, the usual command required
       by the firewall's Telnet server is `connect', followed by a host
       name and a port number. If your proxy needs a different command, you
       can enter an alternative in the `Command to send to proxy' box.

       If you are using the Local proxy type, the local command to run is
       specified here.

       If you are using the `SSH to proxy and execute a command' type,
       the command to run on the SSH proxy server is specified here.
       Similarly, if you are using `SSH to proxy and invoke a subsystem',
       the subsystem name is constructed as specified here.

       In this string, you can use `\n' to represent a new-line, `\r' to
       represent a carriage return, `\t' to represent a tab character, and
       `\x' followed by two hex digits to represent any other character.
       `\\' is used to encode the `\' character itself.

       Also, the special strings `%host' and `%port' will be replaced by
       the host name and port number you want to connect to. For Telnet and
       Local proxy types, the strings `%user' and `%pass' will be replaced
       by the proxy username and password (which, if not specified in the
       configuration, will be prompted for) - this does not happen with SSH
       proxy types (because the proxy username/password are used for SSH
       authentication). The strings `%proxyhost' and `%proxyport' will be
       replaced by the host details specified on the _Proxy_ panel, if any
       (this is most likely to be useful for proxy types using a local or
       remote command). To get a literal `%' sign, enter `%%'.

       If a Telnet proxy server prompts for a username and password before
       commands can be sent, you can use a command such as:

         %user\n%pass\nconnect %host %port\n

       This will send your username and password as the first two lines to
       the proxy, followed by a command to connect to the desired host and
       port. Note that if you do not include the `%user' or `%pass' tokens
       in the Telnet command, then anything specified in `Username' and
       `Password' configuration fields will be ignored.

4.16.6 Controlling proxy logging

       Often the proxy interaction has its own diagnostic output; this is
       particularly the case for local proxy commands.

       The setting `Print proxy diagnostics in the terminal window' lets
       you control how much of the proxy's diagnostics are printed to the
       main terminal window, along with output from your main session.

       By default (`No'), proxy diagnostics are only sent to the Event Log;
       with `Yes' they are also printed to the terminal, where they may
       get mixed up with your main session. `Only until session starts' is
       a compromise; proxy messages will go to the terminal window until
       the main session is deemed to have started (in a protocol-dependent
       way), which is when they're most likely to be interesting; any
       further proxy-related messages during the session will only go to
       the Event Log.

  4.17 The SSH panel

       The SSH panel allows you to configure options that only apply to SSH
       sessions.

4.17.1 Executing a specific command on the server

       In SSH, you don't have to run a general shell session on the server.
       Instead, you can choose to run a single specific command (such as
       a mail user agent, for example). If you want to do this, enter the
       command in the `Remote command' box.

       Note that most servers will close the session after executing the
       command.

4.17.2 `Don't start a shell or command at all'

       If you tick this box, PuTTY will not attempt to run a shell or
       command after connecting to the remote server. You might want to
       use this option if you are only using the SSH connection for port
       forwarding, and your user account on the server does not have the
       ability to run a shell.

       This feature is only available in SSH protocol version 2 (since the
       version 1 protocol assumes you will always want to run a shell).

       This feature can also be enabled using the `-N' command-line option;
       see section 3.11.3.13.

       If you use this feature in Plink, you will not be able to terminate
       the Plink process by any graceful means; the only way to kill it
       will be by pressing Control-C or sending a kill signal from another
       program.

4.17.3 `Enable compression'

       This enables data compression in the SSH connection: data sent by
       the server is compressed before sending, and decompressed at the
       client end. Likewise, data sent by PuTTY to the server is compressed
       first and the server decompresses it at the other end. This can help
       make the most of a low-bandwidth connection.

4.17.4 `SSH protocol version'

       This allows you to select whether to use SSH protocol version 2 or
       the older version 1.

       You should normally leave this at the default of `2'. As well
       as having fewer features, the older SSH-1 protocol is no longer
       developed, has many known cryptographic weaknesses, and is generally
       not considered to be secure. PuTTY's protocol 1 implementation is
       provided mainly for compatibility, and is no longer being enhanced.

       If a server offers both versions, prefer `2'. If you have some
       server or piece of equipment that only talks SSH-1, select `1' here,
       and do not treat the resulting connection as secure.

       PuTTY will not automatically fall back to the other version of the
       protocol if the server turns out not to match your selection here;
       instead, it will put up an error message and abort the connection.
       This prevents an active attacker downgrading an intended SSH-2
       connection to SSH-1.

4.17.5 Sharing an SSH connection between PuTTY tools

       The controls in this box allow you to configure PuTTY to reuse an
       existing SSH connection, where possible.

       The SSH-2 protocol permits you to run multiple data channels over
       the same SSH connection, so that you can log in just once (and do
       the expensive encryption setup just once) and then have more than
       one terminal window open.

       Each instance of PuTTY can still run at most one terminal session,
       but using the controls in this box, you can configure PuTTY to check
       if another instance of itself has already connected to the target
       host, and if so, share that instance's SSH connection instead of
       starting a separate new one.

       To enable this feature, just tick the box `Share SSH connections if
       possible'. Then, whenever you start up a PuTTY session connecting to
       a particular host, it will try to reuse an existing SSH connection
       if one is available. For example, selecting `Duplicate Session' from
       the system menu will launch another session on the same host, and if
       sharing is enabled then it will reuse the existing SSH connection.

       When this mode is in use, the first PuTTY that connected to a given
       server becomes the `upstream', which means that it is the one
       managing the real SSH connection. All subsequent PuTTYs which reuse
       the connection are referred to as `downstreams': they do not connect
       to the real server at all, but instead connect to the upstream PuTTY
       via local inter-process communication methods.

       For this system to be activated, _both_ the upstream and downstream
       instances of PuTTY must have the sharing option enabled.

       The upstream PuTTY can therefore not terminate until all its
       downstreams have closed. This is similar to the effect you get with
       port forwarding or X11 forwarding, in which a PuTTY whose terminal
       session has already finished will still remain open so as to keep
       serving forwarded connections.

       In case you need to configure this system in more detail, there
       are two additional checkboxes which allow you to specify whether a
       particular PuTTY can act as an upstream or a downstream or both.
       (These boxes only take effect if the main `Share SSH connections if
       possible' box is also ticked.) By default both of these boxes are
       ticked, so that multiple PuTTYs started from the same configuration
       will designate one of themselves as the upstream and share a single
       connection; but if for some reason you need a particular PuTTY
       configuration _not_ to be an upstream (e.g. because you definitely
       need it to close promptly) or not to be a downstream (e.g. because
       it needs to do its own authentication using a special private key)
       then you can untick one or the other of these boxes.

       I have referred to `PuTTY' throughout the above discussion, but
       all the other PuTTY tools which make SSH connections can use this
       mechanism too. For example, if PSCP or PSFTP loads a configuration
       with sharing enabled, then it can act as a downstream and use an
       existing SSH connection set up by an instance of GUI PuTTY. The one
       special case is that PSCP and PSFTP will _never_ act as upstreams.

       It is possible to test programmatically for the existence of a live
       upstream using Plink. See section 7.2.3.4.

  4.18 The Kex panel

       The Kex panel (short for `key exchange') allows you to configure
       options related to SSH-2 key exchange.

       Key exchange occurs at the start of an SSH connection (and
       occasionally thereafter); it establishes a shared secret that
       is used as the basis for all of SSH's security features. It is
       therefore very important for the security of the connection that the
       key exchange is secure.

       Key exchange is a cryptographically intensive process; if either
       the client or the server is a relatively slow machine, the slower
       methods may take several tens of seconds to complete.

       If connection startup is too slow, or the connection hangs
       periodically, you may want to try changing these settings.

       If you don't understand what any of this means, it's safe to leave
       these settings alone.

       This entire panel is only relevant to SSH protocol version 2; none
       of these settings affect SSH-1 at all.

4.18.1 Key exchange algorithm selection

       PuTTY supports a variety of SSH-2 key exchange methods, and allows
       you to choose which one you prefer to use; configuration is similar
       to cipher selection (see section 4.20).

       PuTTY currently supports the following key exchange methods:

        -  `NTRU Prime / Curve25519 hybrid': `Streamlined NTRU Prime' is
           a lattice-based algorithm intended to resist quantum attacks.
           In this key exchange method, it is run in parallel with a
           conventional Curve25519-based method (one of those included in
           `ECDH'), in such a way that it should be no _less_ secure than
           that commonly-used method, and hopefully also resistant to a new
           class of attacks.

        -  `ML-KEM / Curve25519 hybrid' and `ML-KEM NIST ECDH hybrid':
           similar hybrid constructs of ML-KEM, another lattice-based key
           exchange method intended to be quantum-resistant. In the former,
           ML-KEM is hybridised with Curve25519; in the latter, with NIST
           P384 or P256.

        -  `ECDH': elliptic curve Diffie-Hellman key exchange, with a
           variety of standard curves and hash algorithms.

        -  The original form of Diffie-Hellman key exchange, with a variety
           of well-known groups and hashes:

            -  `Group 18', a well-known 8192-bit group, used with the SHA-
               512 hash function.

            -  `Group 17', a well-known 6144-bit group, used with the SHA-
               512 hash function.

            -  `Group 16', a well-known 4096-bit group, used with the SHA-
               512 hash function.

            -  `Group 15', a well-known 3072-bit group, used with the SHA-
               512 hash function.

            -  `Group 14': a well-known 2048-bit group, used with the SHA-
               256 hash function or, if the server doesn't support that,
               SHA-1.

            -  `Group 1': a well-known 1024-bit group, used with the SHA-
               1 hash function. Neither we nor current SSH standards
               recommend using this method any longer, and it's not used by
               default in new installations; however, it may be the only
               method supported by very old server software.

        -  `Diffie-Hellman group exchange': with this method, instead of
           using a fixed group, PuTTY requests that the server suggest a
           group to use for a subsequent Diffie-Hellman key exchange; the
           server can avoid groups known to be weak, and possibly invent
           new ones over time, without any changes required to PuTTY's
           configuration. This key exchange method uses the SHA-256 hash
           or, if the server doesn't support that, SHA-1.

        -  `RSA-based key exchange': this requires much less computational
           effort on the part of the client, and somewhat less on the part
           of the server, than Diffie-Hellman key exchange.

        -  `GSSAPI key exchange': see section 4.18.1.1.

       If the first algorithm PuTTY finds is below the `warn below here'
       line, you will see a warning box when you make the connection,
       similar to that for cipher selection (see section 4.20).

4.18.1.1 GSSAPI-based key exchange

       PuTTY supports a set of key exchange methods that also incorporates
       GSSAPI-based authentication. They are enabled with the `Attempt
       GSSAPI key exchange' checkbox (which also appears on the `GSSAPI'
       panel).

       PuTTY can only perform the GSSAPI-authenticated key exchange methods
       when using Kerberos V5, and not other GSSAPI mechanisms. If the user
       running PuTTY has current Kerberos V5 credentials, then PuTTY will
       select the GSSAPI key exchange methods in preference to any of the
       ordinary SSH key exchange methods configured in the preference list.
       There's a GSSAPI-based equivalent to most of the ordinary methods
       listed in section 4.18.1; server support determines which one will
       be used. (PuTTY's preference order for GSSAPI-authenticated key
       exchange methods is fixed, not controlled by the preference list.)

       The advantage of doing GSSAPI authentication as part of the SSH
       key exchange is apparent when you are using credential delegation
       (see section 4.23.1). The SSH key exchange can be repeated later in
       the session, and this allows your Kerberos V5 credentials (which
       are typically short-lived) to be automatically re-delegated to the
       server when they are refreshed on the client. (This feature is
       commonly referred to as `cascading credentials'.)

       If your server doesn't support GSSAPI key exchange, it may still
       support GSSAPI in the SSH user authentication phase. This will still
       let you log in using your Kerberos credentials, but will only allow
       you to delegate the credentials that are active at the beginning of
       the session; they can't be refreshed automatically later, in a long-
       running session. See section 4.23 for how to control GSSAPI user
       authentication in PuTTY.

       Another effect of GSSAPI key exchange is that it replaces the usual
       SSH mechanism of permanent host keys described in section 2.2. So
       if you use this method, then you won't be asked any interactive
       questions about whether to accept the server's host key. Instead,
       the Kerberos exchange will verify the identity of the host you
       connect to, at the same time as verifying your identity to it.

4.18.2 Repeat key exchange

       If the session key negotiated at connection startup is used too much
       or for too long, it may become feasible to mount attacks against the
       SSH connection. Therefore, the SSH-2 protocol specifies that a new
       key exchange should take place every so often; this can be initiated
       by either the client or the server.

       While this renegotiation is taking place, no data can pass through
       the SSH connection, so it may appear to `freeze'. (The occurrence
       of repeat key exchange is noted in the Event Log; see section
       3.1.3.1.) Usually the same algorithm is used as at the start of the
       connection, with a similar overhead.

       These options control how often PuTTY will initiate a repeat key
       exchange (`rekey'). You can also force a key exchange at any time
       from the Special Commands menu (see section 3.1.3.2).

        -  `Max minutes before rekey' specifies the amount of time that
           is allowed to elapse before a rekey is initiated. If this is
           set to zero, PuTTY will not rekey due to elapsed time. The SSH-
           2 protocol specification recommends a timeout of at most 60
           minutes.

       You might have a need to disable time-based rekeys completely
       for the same reasons that keepalives aren't always helpful. If
       you anticipate suffering a network dropout of several hours in
       the middle of an SSH connection, but were not actually planning
       to send _data_ down that connection during those hours, then an
       attempted rekey in the middle of the dropout will probably cause
       the connection to be abandoned, whereas if rekeys are disabled
       then the connection should in principle survive (in the absence
       of interfering firewalls). See section 4.14.1 for more discussion
       of these issues; for these purposes, rekeys have much the same
       properties as keepalives. (Except that rekeys have cryptographic
       value in themselves, so you should bear that in mind when deciding
       whether to turn them off.) Note, however, the the SSH _server_ can
       still initiate rekeys.

        -  `Minutes between GSSAPI checks', if you're using GSSAPI key
           exchange, specifies how often the GSSAPI credential cache is
           checked to see whether new tickets are available for delegation,
           or current ones are near expiration. If forwarding of GSSAPI
           credentials is enabled, PuTTY will try to rekey as necessary to
           keep the delegated credentials from expiring. Frequent checks
           are recommended; rekeying only happens when needed.

        -  `Max data before rekey' specifies the amount of data (in bytes)
           that is permitted to flow in either direction before a rekey is
           initiated. If this is set to zero, PuTTY will not rekey due to
           transferred data. The SSH-2 protocol specification recommends a
           limit of at most 1 gigabyte.

           As well as specifying a value in bytes, the following shorthand
           can be used:

            -  `1k' specifies 1 kilobyte (1024 bytes).

            -  `1M' specifies 1 megabyte (1024 kilobytes).

            -  `1G' specifies 1 gigabyte (1024 megabytes).

       Disabling data-based rekeys entirely is a bad idea. The integrity,
       and to a lesser extent, confidentiality of the SSH-2 protocol depend
       in part on rekeys occurring before a 32-bit packet sequence number
       wraps around. Unlike time-based rekeys, data-based rekeys won't
       occur when the SSH connection is idle, so they shouldn't cause the
       same problems. The SSH-1 protocol, incidentally, has even weaker
       integrity protection than SSH-2 without rekeys.

  4.19 The Host Keys panel

       The Host Keys panel allows you to configure options related to host
       key management.

       Host keys are used to prove the server's identity, and assure you
       that the server is not being spoofed (either by a man-in-the-middle
       attack or by completely replacing it on the network). See section
       2.2 for a basic introduction to host keys.

       Much of this panel is only relevant to SSH protocol version 2; SSH-1
       only supports one type of host key.

4.19.1 Host key type selection

       PuTTY supports a variety of SSH-2 host key types, and allows you
       to choose which one you prefer to use to identify the server.
       Configuration is similar to cipher selection (see section 4.20).

       PuTTY currently supports the following host key types:

        -  `Ed25519': Edwards-curve DSA using a twisted Edwards curve with
           modulus 2^255-19.

        -  `Ed448': another Edwards-curve DSA type, using a larger elliptic
           curve with a 448-bit instead of 255-bit modulus (so it has a
           higher security level than Ed25519).

        -  `ECDSA': elliptic curve DSA using one of the NIST-standardised
           elliptic curves.

        -  `DSA': straightforward DSA using modular exponentiation.

        -  `RSA': the ordinary RSA algorithm.

       If PuTTY already has one or more host keys stored for the server, it
       will by default prefer to use one of those, even if the server has
       a key type that is higher in the preference order. You can add such
       a key to PuTTY's cache from within an existing session using the
       `Special Commands' menu; see section 3.1.3.2.

       Otherwise, PuTTY will choose a key type based purely on the
       preference order you specify in the configuration.

       If the first key type PuTTY finds is below the `warn below here'
       line, you will see a warning box when you make the connection,
       similar to that for cipher selection (see section 4.20).

4.19.2 Preferring known host keys

       By default, PuTTY will adjust the preference order for SSH-2 host
       key algorithms so that any host keys it already knows are moved to
       the top of the list.

       This prevents you from having to check and confirm a new host key
       for a server you already had one for (e.g. because the server has
       generated an alternative key of a type higher in PuTTY's preference
       order, or because you changed the preference order itself).

       However, on the other hand, it can leak information to a listener
       in the network about _whether_ you already know a host key for this
       server.

       For this reason, this policy is configurable. By turning this
       checkbox off, you can reset PuTTY to always use the exact order of
       host key algorithms configured in the preference list described in
       section 4.19.1, so that a listener will find out nothing about what
       keys you had stored.

4.19.3 Manually configuring host keys

       In some situations, if PuTTY's automated host key management is not
       doing what you need, you might need to manually configure PuTTY to
       accept a specific host key, or one of a specific set of host keys.

       One reason why you might want to do this is because the host name
       PuTTY is connecting to is using round-robin DNS to return one of
       multiple actual servers, and they all have different host keys. In
       that situation, you might need to configure PuTTY to accept any of
       a list of host keys for the possible servers, while still rejecting
       any key not in that list.

       Another reason is if PuTTY's automated host key management is
       completely unavailable, e.g. because PuTTY (or Plink or PSFTP, etc)
       is running in a Windows environment without access to the Registry.
       In that situation, you will probably want to use the -hostkey
       command-line option to configure the expected host key(s); see
       section 3.11.3.22.

       For situations where PuTTY's automated host key management simply
       picks the wrong host name to store a key under, you may want to
       consider setting a `logical host name' instead; see section 4.14.5.

       To configure manual host keys via the GUI, enter some text
       describing the host key into the edit box in the `Manually configure
       host keys for this connection' container, and press the `Add'
       button. The text will appear in the `Host keys or fingerprints
       to accept' list box. You can remove keys again with the `Remove'
       button.

       The text describing a host key can be in one of the following
       formats:

        -  An SHA-256-based host key fingerprint of the form displayed in
           PuTTY's Event Log and host key dialog boxes, i.e. `SHA256:'
           followed by 43 case-sensitive characters.

        -  An MD5-based host key fingerprint, i.e. sixteen 2-digit hex
           numbers separated by colons, optionally preceded by the prefix
           `MD5:'. (The case of the characters does not matter.)

        -  A base64-encoded blob describing an SSH-2 public key in
           OpenSSH's one-line public key format. How you acquire
           a public key in this format is server-dependent; on an
           OpenSSH server it can typically be found in a location like
           `/etc/ssh/ssh_host_rsa_key.pub'.

       If this box contains at least one host key or fingerprint when PuTTY
       makes an SSH connection, then PuTTY's automated host key management
       is completely bypassed: the connection will be permitted if and only
       if the host key presented by the server is one of the keys listed
       in this box, and the host key store in the Registry will be neither
       read _nor written_, unless you explicitly do so.

       If the box is empty (as it usually is), then PuTTY's automated host
       key management will work as normal.

4.19.4 Configuring PuTTY to accept host certificates

       In some environments, the SSH host keys for a lot of servers will
       all be signed in turn by a central `certification authority' (`CA'
       for short). This simplifies host key configuration for users,
       because if they configure their SSH client to accept host keys
       certified by that CA, then they don't need to individually confirm
       each host key the first time they connect to that server.

       In order to do this, press the `Configure host CAs' button in the
       `Host keys' configuration panel. This will launch a secondary
       configuration dialog box where you can configure what CAs PuTTY will
       accept signatures from.

       *Note that this configuration is common to all saved sessions*.
       Everything in the main PuTTY configuration is specific to one
       saved session, and you can prepare a separate session with all the
       configuration different. But there's only one copy of the host CA
       configuration, and it applies to all sessions PuTTY runs, whether
       saved or not.

       (Otherwise, it would be useless - configuring a CA by hand for each
       new host wouldn't be any more convenient than pressing the `confirm'
       button for each new host's host key.)

       To set up a new CA using this config box:

       First, load the CA's public key from a file, or paste it directly
       into the `Public key of certification authority' edit box. If your
       organisation signs its host keys in this way, they will publish the
       public key of their CA so that SSH users can include it in their
       configuration.

       Next, in the `Valid hosts this key is trusted to certify' box,
       configure at least one hostname wildcard to say what servers PuTTY
       should trust this CA to speak for. For example, suppose you work for
       Example Corporation (example.com), and the Example Corporation IT
       department has advertised a CA that signs all the Example internal
       machines' host keys. Then probably you want to trust that CA to
       sign host keys for machines in the domain example.com, but not for
       anything else. So you might enter `*.example.com' into the `Valid
       hosts' box.

       *It's important to limit what the CA key is allowed to sign*. Don't
       just enter `*' in that box! If you do that, you're saying that
       Example Corporation IT department is authorised to sign a host key
       for _anything at all_ you might decide to connect to - even if
       you're connecting out of the company network to a machine somewhere
       else, such as your own personal server. So that configuration would
       enable the Example IT department to act as a `man-in-the-middle'
       between your PuTTY process and your server, and listen in to your
       communications - exactly the thing SSH is supposed to avoid.

       So, if the CA was provided to you by the sysadmins responsible for
       example.com (or whatever), make sure PuTTY will _only_ trust it for
       machines in the example.com domain.

       For the full syntax of the `Valid hosts' expression, see section
       4.19.4.1.

       Finally, choose an identifying name for this CA; enter that name
       in the `Name for this CA' edit box at the top of the window, and
       press `Save' to record the CA in your configuration. The name you
       chose will appear in the list of saved CAs to the left of the `Save'
       button.

       The identifying name can be anything you like. It's there so that if
       you store multiple certificates you can tell which is which later
       when you want to edit or delete them. It also appears in the PuTTY
       Event Log when a server presents a certificate signed by that CA.

       To reload an existing CA configuration, select it in the list box
       and press `Load'. Then you can make changes, and save it again.

       To remove a CA from your configuration completely, select it in the
       list and press `Delete'.

4.19.4.1 Expressions you can enter in `Valid hosts'

       The simplest thing you can enter in the `Valid hosts this key is
       trusted to certify' edit box is just a hostname wildcard such as
       `*.example.com'. This matches any host in any subdomain, so both
       `ssh.example.com' and `login.dept.example.com' would match, but
       `prod.example.net' would not.

       But you can also enter multiple host name wildcards, and port number
       ranges, and make complicated Boolean expressions out of them using
       the operators `&&' for `and', `||' for `or', `!' for `not', and
       parentheses.

       For example, here are some other things you could enter.

        -  `*.foo.example.com || *.bar.example.com'. This means the CA is
           trusted to sign the host key for a connection if the host name
           matches `*.foo.example.com' _or_ it matches `*.bar.example.com'.
           In other words, the CA has authority over those two particular
           subdomains of example.com, but not for anything else, like
           www.example.com.

        -  `*.example.com && ! *.extrasecure.example.com'. This means
           the CA is trusted to sign the host key for a connection if
           the host name matches `*.example.com' _but does not_ match
           `*.extrasecure.example.com'. (Imagine if there was one top-
           secret set of servers in your company that the main IT
           department didn't have security clearance to administer.)

        -  `*.example.com && port:22'. This means the CA is trusted to
           sign the host key for a connection if the host name matches
           `*.example.com' _and_ the port number is 22. SSH servers running
           on other ports would not be covered.

        -  `(*.foo.example.com || *.bar.example.com) && port:0-1023'. This
           matches two subdomains of example.com, as before, but _also_
           restricts the port number to the range 0-1023.

       A certificate configuration expression consists of one or more
       individual requirements which can each be a hostname wildcard, a
       single port number, or a port number range, combined together with
       these Boolean operators.

       Unlike other languages such as C, there is no implied priority
       between `&&' and `||'. If you write `A && B || C' (where A, B
       and C are some particular requirements), then PuTTY will report
       a syntax error, because you haven't said which of the `&&' and
       `||' takes priority tightly. You will have to write either
       `(A && B) || C', meaning `both of A and B, or alternatively just C',
       or `A && (B || C)' (`A, and also at least one of B and C'), to make
       it clear.

4.19.4.2 RSA signature types in certificates

       RSA keys can be used to generate signatures with a choice of
       secure hash function. Typically, any version of OpenSSH new enough
       to support certificates at all will also be new enough to avoid
       using SHA-1, so the default settings of accepting the more modern
       SHA-256 and SHA-512 should be suitable for nearly all cases.
       For completeness, however, you can configure which types of RSA
       signature PuTTY will accept in a certificate from a CA using an RSA
       key.

  4.20 The Cipher panel

       PuTTY supports a variety of different encryption algorithms, and
       allows you to choose which one you prefer to use. You can do this by
       dragging the algorithms up and down in the list box (or moving them
       using the Up and Down buttons) to specify a preference order. When
       you make an SSH connection, PuTTY will search down the list from the
       top until it finds an algorithm supported by the server, and then
       use that.

       PuTTY currently supports the following algorithms:

        -  ChaCha20-Poly1305, a combined cipher and MAC (SSH-2 only)

        -  AES (Rijndael) - 256, 192, or 128-bit SDCTR or CBC, or 256 or
           128-bit GCM (SSH-2 only)

        -  Arcfour (RC4) - 256 or 128-bit stream cipher (SSH-2 only)

        -  Blowfish - 256-bit SDCTR (SSH-2 only) or 128-bit CBC

        -  Triple-DES - 168-bit SDCTR (SSH-2 only) or CBC

        -  Single-DES - 56-bit CBC (see below for SSH-2)

       If the algorithm PuTTY finds is below the `warn below here' line,
       you will see a warning box when you make the connection:

         The first cipher supported by the server
         is single-DES, which is below the configured
         warning threshold.
         Do you want to continue with this connection?

       This warns you that the first available encryption is not a very
       secure one. Typically you would put the `warn below here' line
       between the encryptions you consider secure and the ones you
       consider substandard. By default, PuTTY supplies a preference order
       intended to reflect a reasonable preference in terms of security and
       speed.

       In SSH-2, the encryption algorithm is negotiated independently for
       each direction of the connection, although PuTTY does not support
       separate configuration of the preference orders. As a result you may
       get two warnings similar to the one above, possibly with different
       encryptions.

       Single-DES is not recommended in the SSH-2 protocol standards, but
       one or two server implementations do support it. PuTTY can use
       single-DES to interoperate with these servers if you enable the
       `Enable legacy use of single-DES in SSH-2' option; by default this
       is disabled and PuTTY will stick to recommended ciphers.

  4.21 The Auth panel

       The Auth panel allows you to configure authentication options for
       SSH sessions.

4.21.1 `Display pre-authentication banner'

       SSH-2 servers can provide a message for clients to display to the
       prospective user before the user logs in; this is sometimes known
       as a pre-authentication `banner'. Typically this is used to provide
       information about the server and legal notices.

       By default, PuTTY displays this message before prompting for a
       password or similar credentials (although, unfortunately, not before
       prompting for a login name, due to the nature of the protocol
       design). By unchecking this option, display of the banner can be
       suppressed entirely.

4.21.2 `Bypass authentication entirely'

       In SSH-2, it is in principle possible to establish a connection
       without using SSH's mechanisms to identify or prove who you are to
       the server. An SSH server could prefer to handle authentication
       in the data channel, for instance, or simply require no user
       authentication whatsoever.

       By default, PuTTY assumes the server requires authentication (we've
       never heard of one that doesn't), and thus must start this process
       with a username. If you find you are getting username prompts that
       you cannot answer, you could try enabling this option. However, most
       SSH servers will reject this.

       This is not the option you want if you have a username and just
       want PuTTY to remember it; for that see section 4.15.1. It's
       also probably not what if you're trying to set up passwordless
       login to a mainstream SSH server; depending on the server, you
       probably wanted public-key authentication (chapter 8) or perhaps
       GSSAPI authentication (section 4.23). (These are still forms of
       authentication, even if you don't have to interact with them.)

       This option only affects SSH-2 connections. SSH-1 connections always
       require an authentication step.

4.21.3 `Disconnect if authentication succeeds trivially'

       This option causes PuTTY to abandon an SSH session and disconnect
       from the server, if the server accepted authentication without ever
       having asked for any kind of password or signature or token.

       This might be used as a security measure. There are some forms
       of attack against an SSH client user which work by terminating
       the SSH authentication stage early, and then doing something in
       the main part of the SSH session which _looks_ like part of the
       authentication, but isn't really.

       For example, instead of demanding a signature from your public key,
       for which PuTTY would ask for your key's passphrase, a compromised
       or malicious server might allow you to log in with no signature or
       password at all, and then print a message that _imitates_ PuTTY's
       request for your passphrase, in the hope that you would type it in.
       (In fact, the passphrase for your public key should not be sent to
       any server.)

       PuTTY's main defence against attacks of this type is the `trust
       sigil' system: messages in the PuTTY window that are truly
       originated by PuTTY itself are shown next to a small copy of the
       PuTTY icon, which the server cannot fake when it tries to imitate
       the same message using terminal output.

       However, if you think you might be at risk of this kind of thing
       anyway (if you don't watch closely for the trust sigils, or if you
       think you're at extra risk of one of your servers being malicious),
       then you could enable this option as an extra defence. Then, if the
       server tries any of these attacks involving letting you through the
       authentication stage, PuTTY will disconnect from the server before
       it can send a follow-up fake prompt or other type of attack.

       On the other hand, some servers _legitimately_ let you through
       the SSH authentication phase trivially, either because they are
       genuinely public, or because the important authentication step
       happens during the terminal session. (An example might be an SSH
       server that connects you directly to the terminal login prompt of a
       legacy mainframe.) So enabling this option might cause some kinds of
       session to stop working. It's up to you.

4.21.4 `Attempt authentication using Pageant'

       If this option is enabled, then PuTTY will look for Pageant (the
       SSH private-key storage agent) and attempt to authenticate with any
       suitable public keys Pageant currently holds.

       This behaviour is almost always desirable, and is therefore enabled
       by default. In rare cases you might need to turn it off in order
       to force authentication by some non-public-key method such as
       passwords.

       This option can also be controlled using the `-noagent' command-line
       option. See section 3.11.3.9.

       See chapter 9 for more information about Pageant in general.

4.21.5 `Attempt TIS or CryptoCard authentication'

       TIS and CryptoCard authentication are (despite their names) generic
       forms of simple challenge/response authentication available in SSH
       protocol version 1 only. You might use them if you were using S/Key
       one-time passwords, for example, or if you had a physical security
       token that generated responses to authentication challenges. They
       can even be used to prompt for simple passwords.

       With this switch enabled, PuTTY will attempt these forms of
       authentication if the server is willing to try them. You will be
       presented with a challenge string (which may be different every
       time) and must supply the correct response in order to log in.
       If your server supports this, you should talk to your system
       administrator about precisely what form these challenges and
       responses take.

4.21.6 `Attempt keyboard-interactive authentication'

       The SSH-2 equivalent of TIS authentication is called `keyboard-
       interactive'. It is a flexible authentication method using an
       arbitrary sequence of requests and responses; so it is not only
       useful for challenge/response mechanisms such as S/Key, but it can
       also be used for (for example) asking the user for a new password
       when the old one has expired.

       PuTTY leaves this option enabled by default, but supplies a switch
       to turn it off in case you should have trouble with it.

4.21.7 `Allow agent forwarding'

       This option allows the SSH server to open forwarded connections back
       to your local copy of Pageant. If you are not running Pageant, this
       option will do nothing.

       See chapter 9 for general information on Pageant, and section 9.4
       for information on agent forwarding. Note that there is a security
       risk involved with enabling this option; see section 9.6 for
       details.

4.21.8 `Allow attempted changes of username in SSH-2'

       In the SSH-1 protocol, it is impossible to change username after
       failing to authenticate. So if you mis-type your username at the
       PuTTY `login as:' prompt, you will not be able to change it except
       by restarting PuTTY.

       The SSH-2 protocol _does_ allow changes of username, in principle,
       but does not make it mandatory for SSH-2 servers to accept them.
       In particular, OpenSSH does not accept a change of username; once
       you have sent one username, it will reject attempts to try to
       authenticate as another user. (Depending on the version of OpenSSH,
       it may quietly return failure for all login attempts, or it may send
       an error message.)

       For this reason, PuTTY will by default not prompt you for your
       username more than once, in case the server complains. If you know
       your server can cope with it, you can enable the `Allow attempted
       changes of username' option to modify PuTTY's behaviour.

  4.22 The Credentials panel

       This subpane of the Auth panel contains configuration options that
       specify actual _credentials_ to present to the server: key files and
       certificates.

4.22.1 `Private key file for authentication'

       This box is where you enter the name of your private key file if you
       are using public key authentication. See chapter 8 for information
       about public key authentication in SSH.

       This key must be in PuTTY's native format (`*.PPK'). If you have a
       private key in another format that you want to use with PuTTY, see
       section 8.2.15.

       You can use the authentication agent Pageant so that you do not need
       to explicitly configure a key here; see chapter 9.

       If a private key file is specified here with Pageant running, PuTTY
       will first try asking Pageant to authenticate with that key, and
       ignore any other keys Pageant may have. If that fails, PuTTY will
       ask for a passphrase as normal. You can also specify a _public_
       key file in this case (in RFC 4716 or OpenSSH format), as that's
       sufficient to identify the key to Pageant, but of course if Pageant
       isn't present PuTTY can't fall back to using this file itself.

4.22.2 `Certificate to use with the private key'

       (This is optional. If you don't know you need it, you can leave this
       blank.)

       In some environments, user authentication keys can be signed in turn
       by a `certifying authority' (`CA' for short), and user accounts
       on an SSH server can be configured to automatically trust any key
       that's certified by the right signature.

       This can be a convenient setup if you have a very large number of
       servers. When you change your key pair, you might otherwise have to
       edit the authorized_keys file on every server individually, to make
       them all accept the new key. But if instead you configure all those
       servers _once_ to accept keys signed as yours by a CA, then when you
       change your public key, all you have to do is to get the new key
       certified by the same CA as before, and then all your servers will
       automatically accept it without needing individual reconfiguration.

       One way to use a certificate is to incorporate it into your private
       key file. Section 8.2.9 explains how to do that using PuTTYgen. But
       another approach is to tell PuTTY itself where to find the public
       certificate file, and then it will automatically present that
       certificate when authenticating with the corresponding private key.

       To do this, enter the pathname of the certificate file into the
       `Certificate to use with the private key' file selector.

       When this setting is configured, PuTTY will honour it no matter
       whether the private key is found in a file, or loaded into Pageant.

4.22.3 `Plugin to provide authentication responses'

       An SSH server can use the `keyboard-interactive' protocol to present
       a series of arbitrary questions and answers. Sometimes this is
       used for ordinary passwords, but sometimes the server will use the
       same mechanism for something more complicated, such as a one-time
       password system.

       Some of these systems can be automated. For this purpose, PuTTY
       allows you to provide a separate program to act as a `plugin' which
       will take over the authentication and send answers to the questions
       on your behalf.

       If you have been provided with a plugin of this type, you can
       configure it here, by entering a full command line in the `Plugin
       command to run' box.

       (If you want to _write_ a plugin of this type, see appendix H for
       the full specification of how the plugin is expected to behave.)

  4.23 The GSSAPI panel

       The `GSSAPI' subpanel of the `Auth' panel controls the use of
       GSSAPI authentication. This is a mechanism which delegates the
       authentication exchange to a library elsewhere on the client
       machine, which in principle can authenticate in many different ways
       but in practice is usually used with the Kerberos single sign-on
       protocol to implement passwordless login.

       GSSAPI authentication is only available in the SSH-2 protocol.

       PuTTY supports two forms of GSSAPI-based authentication. In one of
       them, the SSH key exchange happens in the normal way, and GSSAPI
       is only involved in authenticating the user. The checkbox labelled
       `Attempt GSSAPI authentication' controls this form.

       In the other method, GSSAPI-based authentication is combined
       with the SSH key exchange phase. If this succeeds, then the SSH
       authentication step has nothing left to do. See section 4.18.1.1 for
       more information about this method. The checkbox labelled `Attempt
       GSSAPI key exchange' controls this form. (The same checkbox appears
       on the `Kex' panel.)

       If one or both of these controls is enabled, then GSSAPI
       authentication will be attempted in one form or the other, and
       (typically) if your client machine has valid Kerberos credentials
       loaded, then PuTTY should be able to authenticate automatically to
       servers that support Kerberos logins.

       If both of those checkboxes are disabled, PuTTY will not try any
       form of GSSAPI at all, and the rest of this panel will be unused.

4.23.1 `Allow GSSAPI credential delegation'

       GSSAPI credential delegation is a mechanism for passing on your
       Kerberos (or other) identity to the session on the SSH server. If
       you enable this option, then not only will PuTTY be able to log in
       automatically to a server that accepts your Kerberos credentials,
       but also you will be able to connect out from that server to other
       Kerberos-supporting services and use the same credentials just as
       automatically.

       (This option is the Kerberos analogue of SSH agent forwarding; see
       section 9.4 for some information on that.)

       Note that, like SSH agent forwarding, there is a security
       implication in the use of this option: the administrator of
       the server you connect to, or anyone else who has cracked the
       administrator account on that server, could fake your identity
       when connecting to further Kerberos-supporting services. However,
       Kerberos sites are typically run by a central authority, so the
       administrator of one server is likely to already have access to the
       other services too; so this would typically be less of a risk than
       SSH agent forwarding.

       If your connection is not using GSSAPI key exchange, it is possible
       for the delegation to expire during your session. See section
       4.18.1.1 for more information.

4.23.2 Preference order for GSSAPI libraries

       GSSAPI is a mechanism which allows more than one authentication
       method to be accessed through the same interface. Therefore, more
       than one authentication library may exist on your system which can
       be accessed using GSSAPI.

       PuTTY contains native support for a few well-known such libraries
       (including Windows' SSPI), and will look for all of them on your
       system and use whichever it finds. If more than one exists on your
       system and you need to use a specific one, you can adjust the order
       in which it will search using this preference list control.

       One of the options in the preference list is to use a user-specified
       GSSAPI library. If the library you want to use is not mentioned by
       name in PuTTY's list of options, you can enter its full pathname in
       the `User-supplied GSSAPI library path' field, and move the `User-
       supplied GSSAPI library' option in the preference list to make sure
       it is selected before anything else.

       On Windows, such libraries are files with a .dll extension, and
       must have been built in the same way as the PuTTY executable you're
       running; if you have a 32-bit DLL, you must run a 32-bit version
       of PuTTY, and the same with 64-bit (see question A.6.10). On Unix,
       shared libraries generally have a .so extension.

  4.24 The TTY panel

       The TTY panel lets you configure the remote pseudo-terminal.

4.24.1 `Don't allocate a pseudo-terminal'

       When connecting to a Unix system, most interactive shell sessions
       are run in a _pseudo-terminal_, which allows the Unix system to
       pretend it's talking to a real physical terminal device but allows
       the SSH server to catch all the data coming from that fake device
       and send it back to the client.

       Occasionally you might find you have a need to run a session _not_
       in a pseudo-terminal. In PuTTY, this is generally only useful for
       very specialist purposes; although in Plink (see chapter 7) it is
       the usual way of working.

4.24.2 Sending terminal modes

       The SSH protocol allows the client to send `terminal modes' for
       the remote pseudo-terminal. These usually control the server's
       expectation of the local terminal's behaviour.

       If your server does not have sensible defaults for these modes, you
       may find that changing them here helps, although the server is at
       liberty to ignore your changes. If you don't understand any of this,
       it's safe to leave these settings alone.

       (None of these settings will have any effect if no pseudo-terminal
       is requested or allocated.)

       You can change what happens for a particular mode by selecting it in
       the list, choosing one of the options and specifying the exact value
       if necessary, and hitting `Set'. The effect of the options is as
       follows:

        -  If the `Auto' option is selected, the PuTTY tools will decide
           whether to specify that mode to the server, and if so, will send
           a sensible value.

           PuTTY proper will send modes that it has an opinion on
           (currently only the code for the Backspace key, ERASE, and
           whether the character set is UTF-8, IUTF8). Plink on Unix will
           propagate appropriate modes from the local terminal, if any.

        -  If `Nothing' is selected, no value for the mode will be
           specified to the server under any circumstances.

        -  If a value is specified, it will be sent to the server under all
           circumstances. The precise syntax of the value box depends on
           the mode.

       By default, all of the available modes are listed as `Auto', which
       should do the right thing in most circumstances.

       The precise effect of each setting, if any, is up to the server.
       Their names come from POSIX and other Unix systems, and they are
       most likely to have a useful effect on such systems. (These are the
       same settings that can usually be changed using the `stty' command
       once logged in to such servers.)

       Some notable modes are described below; for fuller explanations, see
       your server documentation.

        -  ERASE is the character that when typed by the user will delete
           one space to the left. When set to `Auto' (the default setting),
           this follows the setting of the local Backspace key in PuTTY
           (see section 4.4.1).

           This and other special characters are specified using `^C'
           notation for Ctrl-C, and so on. Use `^<27>' or `^<0x1B>' to
           specify a character numerically, and `^~' to get a literal `^'.
           Other non-control characters are denoted by themselves. Leaving
           the box entirely blank indicates that _no_ character should be
           assigned to the specified function, although this may not be
           supported by all servers.

        -  QUIT is a special character that usually forcefully ends the
           current process on the server (SIGQUIT). On many servers its
           default setting is Ctrl-backslash (`^\'), which is easy to
           accidentally invoke on many keyboards. If this is getting in
           your way, you may want to change it to another character or turn
           it off entirely.

        -  Boolean modes such as ECHO and ICANON can be specified in PuTTY
           in a variety of ways, such as true/false, yes/no, and 0/1.
           (Explicitly specifying a value of no is different from not
           sending the mode at all.)

        -  The boolean mode IUTF8 signals to the server whether the
           terminal character set is UTF-8 or not, for purposes such as
           basic line editing; if this is set incorrectly, the backspace
           key may erase the wrong amount of text, for instance. However,
           simply setting this is not usually sufficient for the server to
           use UTF-8; POSIX servers will generally also require the locale
           to be set (by some server-dependent means), although many newer
           installations default to UTF-8. Also, since this mode was added
           to the SSH protocol much later than the others, many servers
           (particularly older servers) do not honour this mode sent over
           SSH; indeed, a few poorly-written servers object to its mere
           presence, so you may find you need to set it to not be sent
           at all. When set to `Auto', this follows the local configured
           character set (see section 4.10.1).

        -  Terminal speeds are configured elsewhere; see section 4.15.4.

  4.25 The X11 panel

       The X11 panel allows you to configure forwarding of X11 over an SSH
       connection.

       If your server lets you run X Window System graphical applications,
       X11 forwarding allows you to securely give those applications access
       to a local X display on your PC.

       To enable X11 forwarding, check the `Enable X11 forwarding' box.
       If your X display is somewhere unusual, you will need to enter its
       location in the `X display location' box; if this is left blank,
       PuTTY will try to find a sensible default in the environment, or use
       the primary local display (`:0') if that fails.

       See section 3.4 for more information about X11 forwarding.

4.25.1 Remote X11 authentication

       If you are using X11 forwarding, the virtual X server created on the
       SSH server machine will be protected by authorisation data. This
       data is invented, and checked, by PuTTY.

       The usual authorisation method used for this is called MIT-MAGIC-
       COOKIE-1. This is a simple password-style protocol: the X client
       sends some cookie data to the server, and the server checks that it
       matches the real cookie. The cookie data is sent over an unencrypted
       X11 connection; so if you allow a client on a third machine to
       access the virtual X server, then the cookie will be sent in the
       clear.

       PuTTY offers the alternative protocol XDM-AUTHORIZATION-1. This is
       a cryptographically authenticated protocol: the data sent by the X
       client is different every time, and it depends on the IP address
       and port of the client's end of the connection and is also stamped
       with the current time. So an eavesdropper who captures an XDM-
       AUTHORIZATION-1 string cannot immediately re-use it for their own X
       connection.

       PuTTY's support for XDM-AUTHORIZATION-1 is a somewhat experimental
       feature, and may encounter several problems:

        -  Some X clients probably do not even support XDM-AUTHORIZATION-
           1, so they will not know what to do with the data PuTTY has
           provided.

        -  This authentication mechanism will only work in SSH-2. In SSH-
           1, the SSH server does not tell the client the source address
           of a forwarded connection in a machine-readable format, so it's
           impossible to verify the XDM-AUTHORIZATION-1 data.

        -  You may find this feature causes problems with some SSH servers,
           which will not clean up XDM-AUTHORIZATION-1 data after a
           session, so that if you then connect to the same server using
           a client which only does MIT-MAGIC-COOKIE-1 and are allocated
           the same remote display number, you might find that out-of-date
           authentication data is still present on your server and your X
           connections fail.

       PuTTY's default is MIT-MAGIC-COOKIE-1. If you change it, you should
       be sure you know what you're doing.

4.25.2 X authority file for local display

       If you are using X11 forwarding, the local X server to which your
       forwarded connections are eventually directed may itself require
       authorisation.

       Some Windows X servers do not require this: they do authorisation
       by simpler means, such as accepting any connection from the local
       machine but not from anywhere else. However, if your X server does
       require authorisation, then PuTTY needs to know what authorisation
       is required.

       One way in which this data might be made available is for the X
       server to store it somewhere in a file which has the same format
       as the Unix `.Xauthority' file. If this is how your Windows X
       server works, then you can tell PuTTY where to find this file by
       configuring this option. By default, PuTTY will not attempt to find
       any authorisation for your local display.

  4.26 The Tunnels panel

       The Tunnels panel allows you to configure tunnelling of arbitrary
       connection types through an SSH connection.

       Port forwarding allows you to tunnel other types of network
       connection down an SSH session. See section 3.5 for a general
       discussion of port forwarding and how it works.

       The port forwarding section in the Tunnels panel shows a list of all
       the port forwardings that PuTTY will try to set up when it connects
       to the server. By default no port forwardings are set up, so this
       list is empty.

       To add a port forwarding:

        -  Set one of the `Local' or `Remote' radio buttons, depending on
           whether you want to forward a local port to a remote destination
           (`Local') or forward a remote port to a local destination
           (`Remote'). Alternatively, select `Dynamic' if you want PuTTY to
           provide a local SOCKS 4/4A/5 proxy on a local port (note that
           this proxy only supports TCP connections; the SSH protocol does
           not support forwarding UDP).

        -  Enter a source port number into the `Source port' box. For local
           forwardings, PuTTY will listen on this port of your PC. For
           remote forwardings, your SSH server will listen on this port of
           the remote machine. Note that most servers will not allow you to
           listen on port numbers less than 1024.

        -  If you have selected `Local' or `Remote' (this step is not
           needed with `Dynamic'), enter a hostname and port number
           separated by a colon, in the `Destination' box. Connections
           received on the source port will be directed to this
           destination. For example, to connect to a POP-3 server, you
           might enter `popserver.example.com:110'. (If you need to enter
           a literal IPv6 address, enclose it in square brackets, for
           instance `[::1]:2200'.)

        -  Click the `Add' button. Your forwarding details should appear in
           the list box.

       To remove a port forwarding, simply select its details in the list
       box, and click the `Remove' button.

       In the `Source port' box, you can also optionally enter an IP
       address to listen on, by specifying (for instance) `127.0.0.5:79'.
       See section 3.5 for more information on how this works and its
       restrictions.

       In place of port numbers, you can enter service names, if they are
       known to the local system. For instance, in the `Destination' box,
       you could enter `popserver.example.com:pop3'.

       You can modify the currently active set of port forwardings in mid-
       session using `Change Settings' (see section 3.1.3.4). If you delete
       a local or dynamic port forwarding in mid-session, PuTTY will stop
       listening for connections on that port, so it can be re-used by
       another program. If you delete a remote port forwarding, note that:

        -  The SSH-1 protocol contains no mechanism for asking the server
           to stop listening on a remote port.

        -  The SSH-2 protocol does contain such a mechanism, but not all
           SSH servers support it. (In particular, OpenSSH does not support
           it in any version earlier than 3.9.)

       If you ask to delete a remote port forwarding and PuTTY cannot make
       the server actually stop listening on the port, it will instead
       just start refusing incoming connections on that port. Therefore,
       although the port cannot be reused by another program, you can at
       least be reasonably sure that server-side programs can no longer
       access the service at your end of the port forwarding.

       If you delete a forwarding, any existing connections established
       using that forwarding remain open. Similarly, changes to global
       settings such as `Local ports accept connections from other hosts'
       only take effect on new forwardings.

       If the connection you are forwarding over SSH is itself a second
       SSH connection made by another copy of PuTTY, you might find the
       `logical host name' configuration option useful to warn PuTTY of
       which host key it should be expecting. See section 4.14.5 for
       details of this.

4.26.1 Controlling the visibility of forwarded ports

       The source port for a forwarded connection usually does not accept
       connections from any machine except the SSH client or server machine
       itself (for local and remote forwardings respectively). There are
       controls in the Tunnels panel to change this:

        -  The `Local ports accept connections from other hosts' option
           allows you to set up local-to-remote port forwardings in such a
           way that machines other than your client PC can connect to the
           forwarded port. (This also applies to dynamic SOCKS forwarding.)

        -  The `Remote ports do the same' option does the same thing for
           remote-to-local port forwardings (so that machines other than
           the SSH server machine can connect to the forwarded port.) Note
           that this feature is only available in the SSH-2 protocol, and
           not all SSH-2 servers support it (OpenSSH 3.0 does not, for
           example).

4.26.2 Selecting Internet protocol version for forwarded ports

       This switch allows you to select a specific Internet protocol (IPv4
       or IPv6) for the local end of a forwarded port. By default, it is
       set on `Auto', which means that:

        -  for a local-to-remote port forwarding, PuTTY will listen for
           incoming connections in both IPv4 and (if available) IPv6

        -  for a remote-to-local port forwarding, PuTTY will choose a
           sensible protocol for the outgoing connection.

       This overrides the general Internet protocol version preference on
       the Connection panel (see section 4.14.4).

       Note that some operating systems may listen for incoming connections
       in IPv4 even if you specifically asked for IPv6, because their IPv4
       and IPv6 protocol stacks are linked together. Apparently Linux does
       this, and Windows does not. So if you're running PuTTY on Windows
       and you tick `IPv6' for a local or dynamic port forwarding, it will
       _only_ be usable by connecting to it using IPv6; whereas if you do
       the same on Linux, you can also use it with IPv4. However, ticking
       `Auto' should always give you a port which you can connect to using
       either protocol.

  4.27 The Bugs and More Bugs panels

       Not all SSH servers work properly. Various existing servers have
       bugs in them, which can make it impossible for a client to talk to
       them unless it knows about the bug and works around it.

       Since most servers announce their software version number at the
       beginning of the SSH connection, PuTTY will attempt to detect which
       bugs it can expect to see in the server and automatically enable
       workarounds. However, sometimes it will make mistakes; if the server
       has been deliberately configured to conceal its version number, or
       if the server is a version which PuTTY's bug database does not know
       about, then PuTTY will not know what bugs to expect.

       The Bugs and More Bugs panels (there are two because we have so many
       bug compatibility modes) allow you to manually configure the bugs
       PuTTY expects to see in the server. Each bug can be configured in
       three states:

        -  `Off': PuTTY will assume the server does not have the bug.

        -  `On': PuTTY will assume the server _does_ have the bug.

        -  `Auto': PuTTY will use the server's version number announcement
           to try to guess whether or not the server has the bug. (This
           option is not available for bugs that _cannot_ be detected from
           the server version, e.g. because they must be acted on before
           the server version is known.)

       (The PuTTY project has a defined policy about when we're prepared to
       add auto-detection for a bug workaround. See section B.6.)

4.27.1 `Chokes on SSH-2 ignore messages'

       An ignore message (SSH_MSG_IGNORE) is a message in the SSH protocol
       which can be sent from the client to the server, or from the server
       to the client, at any time. Either side is required to ignore the
       message whenever it receives it. PuTTY uses ignore messages in
       SSH-2 to confuse the encrypted data stream and make it harder to
       cryptanalyse. It also uses ignore messages for connection keepalives
       (see section 4.14.1).

       If it believes the server to have this bug, PuTTY will stop using
       ignore messages. If this bug is enabled when talking to a correct
       server, the session will succeed, but keepalives will not work and
       the session might be less cryptographically secure than it could be.

4.27.2 `Handles SSH-2 key re-exchange badly'

       Some SSH servers cannot cope with repeat key exchange at all, and
       will ignore attempts by the client to start one. Since PuTTY pauses
       the session while performing a repeat key exchange, the effect of
       this would be to cause the session to hang after an hour (unless
       you have your rekey timeout set differently; see section 4.18.2 for
       more about rekeys). Other, very old, SSH servers handle repeat key
       exchange even more badly, and disconnect upon receiving a repeat key
       exchange request.

       If this bug is detected, PuTTY will never initiate a repeat key
       exchange. If this bug is enabled when talking to a correct server,
       the session should still function, but may be less secure than you
       would expect.

       This is an SSH-2-specific bug.

4.27.3 `Chokes on PuTTY's SSH-2 `winadj' requests'

       PuTTY sometimes sends a special request to SSH servers in the middle
       of channel data, with the name winadj@putty.projects.tartarus.org
       (see section G.1). The purpose of this request is to measure the
       round-trip time to the server, which PuTTY uses to tune its flow
       control. The server does not actually have to _understand_ the
       message; it is expected to send back a SSH_MSG_CHANNEL_FAILURE
       message indicating that it didn't understand it. (All PuTTY needs
       for its timing calculations is _some_ kind of response.)

       It has been known for some SSH servers to get confused by this
       message in one way or another - because it has a long name, or
       because they can't cope with unrecognised request names even to the
       extent of sending back the correct failure response, or because they
       handle it sensibly but fill up the server's log file with pointless
       spam, or whatever. PuTTY therefore supports this bug-compatibility
       flag: if it believes the server has this bug, it will never send
       its `winadj@putty.projects.tartarus.org' request, and will make do
       without its timing data.

4.27.4 `Replies to requests on closed channels'

       The SSH protocol as published in RFC 4254 has an ambiguity which
       arises if one side of a connection tries to close a channel, while
       the other side simultaneously sends a request within the channel and
       asks for a reply. RFC 4254 leaves it unclear whether the closing
       side should reply to the channel request after having announced its
       intention to close the channel.

       Discussion on the ietf-ssh mailing list in April 2014 formed a clear
       consensus that the right answer is no. However, because of the
       ambiguity in the specification, some SSH servers have implemented
       the other policy; for example, OpenSSH used to until it was fixed.

       Because PuTTY sends channel requests with the `want reply'
       flag throughout channels' lifetime (see section 4.27.3), it's
       possible that when connecting to such a server it might receive
       a reply to a request after it thinks the channel has entirely
       closed, and terminate with an error along the lines of `Received
       SSH2_MSG_CHANNEL_FAILURE for nonexistent channel 256'.

4.27.5 `Ignores SSH-2 maximum packet size'

       When an SSH-2 channel is set up, each end announces the maximum size
       of data packet that it is willing to receive for that channel. Some
       servers ignore PuTTY's announcement and send packets larger than
       PuTTY is willing to accept, causing it to report `Incoming packet
       was garbled on decryption'.

       If this bug is detected, PuTTY never allows the channel's flow-
       control window to grow large enough to allow the server to send an
       over-sized packet. If this bug is enabled when talking to a correct
       server, the session will work correctly, but download performance
       will be less than it could be.

4.27.6 `Discards data sent before its greeting'

       Just occasionally, an SSH connection can be established over some
       channel that will accidentally discard outgoing data very early in
       the connection.

       This is not typically seen as a bug in an actual SSH server, but
       it can sometimes occur in situations involving a complicated proxy
       process. An example is Debian bug #991958, in which a connection
       going over the console of a User Mode Linux kernel can lose outgoing
       data before the kernel has fully booted.

       You can work around this problem by manually enabling this bug flag,
       which will cause PuTTY to wait to send its initial SSH greeting
       until after it sees the greeting from the server.

       Note that this bug flag can never be automatically detected,
       since auto-detection relies on the version string in the server's
       greeting, and PuTTY has to decide whether to expect this bug
       _before_ it sees the server's greeting. So this is a manual
       workaround only.

4.27.7 `Chokes on PuTTY's full KEXINIT'

       At the start of an SSH connection, the client and server exchange
       long messages of type SSH_MSG_KEXINIT, containing lists of all the
       cryptographic algorithms they're prepared to use. This is used to
       negotiate a set of algorithms that both ends can speak.

       Occasionally, a badly written server might have a length limit on
       the list it's prepared to receive, and refuse to make a connection
       simply because PuTTY is giving it too many choices.

       A workaround is to enable this flag, which will make PuTTY wait to
       send KEXINIT until after it receives the one from the server, and
       then filter its own KEXINIT to leave out any algorithm the server
       doesn't also announce support for. This will generally make PuTTY's
       KEXINIT at most the size of the server's, and will otherwise make no
       difference to the algorithm negotiation.

       This flag is a minor violation of the SSH protocol, because both
       sides are supposed to send KEXINIT proactively. It still works
       provided _one_ side sends its KEXINIT without waiting, but if both
       client and server waited for the other one to speak first, the
       connection would deadlock. We don't know of any servers that do
       this, but if there is one, then this flag will make PuTTY unable to
       speak to them at all.

4.27.8 `Old RSA/SHA2 cert algorithm naming'

       If PuTTY is trying to do SSH-2 user authentication using an RSA
       key, and the server is using one of the newer SHA-2 based versions
       of the SSH RSA protocol, and the user's key is also a certificate,
       then earlier versions of OpenSSH (up to 7.7) disagree with later
       versions about the right key algorithm string to send in the
       SSH2_MSG_USERAUTH_REQUEST packet. Modern versions send a string
       that indicates both the SHA-2 nature and the certificate nature
       of the key, such as `rsa-sha2-512-cert-v01@openssh.com'. Earlier
       versions would reject that, and insist on seeing `ssh-rsa-cert-
       v01@openssh.com' followed by a SHA-2 based signature.

       PuTTY should auto-detect the presence of this bug in earlier OpenSSH
       and adjust to send the right string.

4.27.9 `Requires padding on SSH-2 RSA signatures'

       Versions below 3.3 of OpenSSH require SSH-2 RSA signatures to be
       padded with zero bytes to the same length as the RSA key modulus.
       The SSH-2 specification says that an unpadded signature MUST be
       accepted, so this is a bug. A typical symptom of this problem is
       that PuTTY mysteriously fails RSA authentication once in every few
       hundred attempts, and falls back to passwords.

       If this bug is detected, PuTTY will pad its signatures in the way
       OpenSSH expects. If this bug is enabled when talking to a correct
       server, it is likely that no damage will be done, since correct
       servers usually still accept padded signatures because they're used
       to talking to OpenSSH.

       This is an SSH-2-specific bug.

4.27.10 `Only supports pre-RFC4419 SSH-2 DH GEX'

       The SSH key exchange method that uses Diffie-Hellman group exchange
       was redesigned after its original release, to use a slightly more
       sophisticated setup message. Almost all SSH implementations switched
       over to the new version. (PuTTY was one of the last.) A few old
       servers still only support the old one.

       If this bug is detected, and the client and server negotiate Diffie-
       Hellman group exchange, then PuTTY will send the old message now
       known as SSH2_MSG_KEX_DH_GEX_REQUEST_OLD in place of the new
       SSH2_MSG_KEX_DH_GEX_REQUEST.

       This is an SSH-2-specific bug.

4.27.11 `Miscomputes SSH-2 HMAC keys'

       Versions 2.3.0 and below of the SSH server software from ssh.com
       compute the keys for their HMAC message authentication codes
       incorrectly. A typical symptom of this problem is that PuTTY dies
       unexpectedly at the beginning of the session, saying `Incorrect MAC
       received on packet'.

       If this bug is detected, PuTTY will compute its HMAC keys in the
       same way as the buggy server, so that communication will still be
       possible. If this bug is enabled when talking to a correct server,
       communication will fail.

       This is an SSH-2-specific bug.

4.27.12 `Misuses the session ID in SSH-2 PK auth'

       Versions below 2.3 of OpenSSH require SSH-2 public-key
       authentication to be done slightly differently: the data to be
       signed by the client contains the session ID formatted in a
       different way. If public-key authentication mysteriously does
       not work but the Event Log (see section 3.1.3.1) thinks it has
       successfully sent a signature, it might be worth enabling the
       workaround for this bug to see if it helps.

       If this bug is detected, PuTTY will sign data in the way OpenSSH
       expects. If this bug is enabled when talking to a correct server,
       SSH-2 public-key authentication will fail.

       This is an SSH-2-specific bug.

4.27.13 `Miscomputes SSH-2 encryption keys'

       Versions below 2.0.11 of the SSH server software from ssh.com
       compute the keys for the session encryption incorrectly. This
       problem can cause various error messages, such as `Incoming packet
       was garbled on decryption', or possibly even `Out of memory'.

       If this bug is detected, PuTTY will compute its encryption keys
       in the same way as the buggy server, so that communication will
       still be possible. If this bug is enabled when talking to a correct
       server, communication will fail.

       This is an SSH-2-specific bug.

4.27.14 `Chokes on SSH-1 ignore messages'

       An ignore message (SSH_MSG_IGNORE) is a message in the SSH protocol
       which can be sent from the client to the server, or from the server
       to the client, at any time. Either side is required to ignore the
       message whenever it receives it. PuTTY uses ignore messages to hide
       the password packet in SSH-1, so that a listener cannot tell the
       length of the user's password; it also uses ignore messages for
       connection keepalives (see section 4.14.1).

       If this bug is detected, PuTTY will stop using ignore messages.
       This means that keepalives will stop working, and PuTTY will
       have to fall back to a secondary defence against SSH-1 password-
       length eavesdropping. See section 4.27.15. If this bug is enabled
       when talking to a correct server, the session will succeed, but
       keepalives will not work and the session might be more vulnerable to
       eavesdroppers than it could be.

4.27.15 `Refuses all SSH-1 password camouflage'

       When talking to an SSH-1 server which cannot deal with ignore
       messages (see section 4.27.14), PuTTY will attempt to disguise the
       length of the user's password by sending additional padding _within_
       the password packet. This is technically a violation of the SSH-
       1 specification, and so PuTTY will only do it when it cannot use
       standards-compliant ignore messages as camouflage. In this sense,
       for a server to refuse to accept a padded password packet is not
       really a bug, but it does make life inconvenient if the server can
       also not handle ignore messages.

       If this `bug' is detected, PuTTY will assume that neither ignore
       messages nor padding are acceptable, and that it thus has no choice
       but to send the user's password with no form of camouflage, so
       that an eavesdropping user will be easily able to find out the
       exact length of the password. If this bug is enabled when talking
       to a correct server, the session will succeed, but will be more
       vulnerable to eavesdroppers than it could be.

       This is an SSH-1-specific bug. SSH-2 is secure against this type of
       attack.

4.27.16 `Chokes on SSH-1 RSA authentication'

       Some SSH-1 servers cannot deal with RSA authentication messages at
       all. If Pageant is running and contains any SSH-1 keys, PuTTY will
       normally automatically try RSA authentication before falling back
       to passwords, so these servers will crash when they see the RSA
       attempt.

       If this bug is detected, PuTTY will go straight to password
       authentication. If this bug is enabled when talking to a correct
       server, the session will succeed, but of course RSA authentication
       will be impossible.

       This is an SSH-1-specific bug.

  4.28 The `Bare ssh-connection' protocol

       In addition to SSH itself, PuTTY also supports a second protocol
       that is derived from SSH. It's listed in the PuTTY GUI under the
       name `Bare ssh-connection'.

       This protocol consists of just the innermost of SSH-2's three
       layers: it leaves out the cryptography layer providing network
       security, and it leaves out the authentication layer where you
       provide a username and prove you're allowed to log in as that user.

       It is therefore *completely unsuited to any network connection*.
       Don't try to use it over a network!

       The purpose of this protocol is for various specialist circumstances
       in which the `connection' is not over a real network, but is a pipe
       or IPC channel between different processes running on the _same_
       computer. In these contexts, the operating system will already have
       guaranteed that each of the two communicating processes is owned by
       the expected user (so that no authentication is necessary), and that
       the communications channel cannot be tapped by a hostile user on the
       same machine (so that no cryptography is necessary either). Examples
       of possible uses involve communicating with a strongly separated
       context such as the inside of a container, or a VM, or a different
       network namespace.

       Explicit support for this protocol is new in PuTTY 0.75. As of 2021-
       04, the only known server for the bare ssh-connection protocol is
       the Unix program `psusan' that is also part of the PuTTY tool suite.

       (However, this protocol is also the same one used between instances
       of PuTTY to implement connection sharing: see section 4.17.5. In
       fact, in the Unix version of PuTTY, when a sharing upstream records
       `Sharing this connection at [pathname]' in the Event Log, it's
       possible to connect another instance of PuTTY directly to that Unix
       socket, by entering its pathname in the host name box and selecting
       `Bare ssh-connection' as the protocol!)

       Many of the options under the SSH panel also affect this protocol,
       although options to do with cryptography and authentication do not,
       for obvious reasons.

       I repeat, *DON'T TRY TO USE THIS PROTOCOL FOR NETWORK CONNECTIONS!*
       That's not what it's for, and it's not at all safe to do it.

  4.29 The Serial panel

       The Serial panel allows you to configure options that only apply
       when PuTTY is connecting to a local serial line.

4.29.1 Selecting a serial line to connect to

       The `Serial line to connect to' box allows you to choose which
       serial line you want PuTTY to talk to, if your computer has more
       than one serial port.

       On Windows, the first serial line is called COM1, and if there is a
       second it is called COM2, and so on.

       This configuration setting is also visible on the Session panel,
       where it replaces the `Host Name' box (see section 4.1.1) if the
       connection type is set to `Serial'.

4.29.2 Selecting the speed of your serial line

       The `Speed' box allows you to choose the speed (or `baud rate') at
       which to talk to the serial line. Typical values might be 9600,
       19200, 38400 or 57600. Which one you need will depend on the device
       at the other end of the serial cable; consult the manual for that
       device if you are in doubt.

       This configuration setting is also visible on the Session panel,
       where it replaces the `Port' box (see section 4.1.1) if the
       connection type is set to `Serial'.

4.29.3 Selecting the number of data bits

       The `Data bits' box allows you to choose how many data bits are
       transmitted in each byte sent or received through the serial line.
       Typical values are 7 or 8.

4.29.4 Selecting the number of stop bits

       The `Stop bits' box allows you to choose how many stop bits are used
       in the serial line protocol. Typical values are 1, 1.5 or 2.

4.29.5 Selecting the serial parity checking scheme

       The `Parity' box allows you to choose what type of parity checking
       is used on the serial line. The settings are:

        -  `None': no parity bit is sent at all.

        -  `Odd': an extra parity bit is sent alongside each byte, and
           arranged so that the total number of 1 bits is odd.

        -  `Even': an extra parity bit is sent alongside each byte, and
           arranged so that the total number of 1 bits is even.

        -  `Mark': an extra parity bit is sent alongside each byte, and
           always set to 1.

        -  `Space': an extra parity bit is sent alongside each byte, and
           always set to 0.

4.29.6 Selecting the serial flow control scheme

       The `Flow control' box allows you to choose what type of flow
       control checking is used on the serial line. The settings are:

        -  `None': no flow control is done. Data may be lost if either side
           attempts to send faster than the serial line permits.

        -  `XON/XOFF': flow control is done by sending XON and XOFF
           characters within the data stream.

        -  `RTS/CTS': flow control is done using the RTS and CTS wires on
           the serial line.

        -  `DSR/DTR': flow control is done using the DSR and DTR wires on
           the serial line.

  4.30 The Telnet panel

       The Telnet panel allows you to configure options that only apply to
       Telnet sessions.

4.30.1 `Handling of OLD_ENVIRON ambiguity'

       The original Telnet mechanism for passing environment variables was
       badly specified. At the time the standard (RFC 1408) was written,
       BSD telnet implementations were already supporting the feature, and
       the intention of the standard was to describe the behaviour the BSD
       implementations were already using.

       Sadly there was a typing error in the standard when it was issued,
       and two vital function codes were specified the wrong way round. BSD
       implementations did not change, and the standard was not corrected.
       Therefore, it's possible you might find either BSD or RFC-compliant
       implementations out there. This switch allows you to choose which
       one PuTTY claims to be.

       The problem was solved by issuing a second standard, defining a
       new Telnet mechanism called NEW_ENVIRON, which behaved exactly
       like the original OLD_ENVIRON but was not encumbered by existing
       implementations. Most Telnet servers now support this, and it's
       unambiguous. This feature should only be needed if you have trouble
       passing environment variables to quite an old server.

4.30.2 Passive and active Telnet negotiation modes

       In a Telnet connection, there are two types of data passed between
       the client and the server: actual text, and _negotiations_ about
       which Telnet extra features to use.

       PuTTY can use two different strategies for negotiation:

        -  In _active_ mode, PuTTY starts to send negotiations as soon as
           the connection is opened.

        -  In _passive_ mode, PuTTY will wait to negotiate until it sees a
           negotiation from the server.

       The obvious disadvantage of passive mode is that if the server is
       also operating in a passive mode, then negotiation will never begin
       at all. For this reason PuTTY defaults to active mode.

       However, sometimes passive mode is required in order to successfully
       get through certain types of firewall and Telnet proxy server. If
       you have confusing trouble with a firewall, you could try enabling
       passive mode to see if it helps.

4.30.3 `Keyboard sends Telnet special commands'

       If this box is checked, several key sequences will have their normal
       actions modified:

        -  the Backspace key on the keyboard will send the Telnet special
           backspace code;

        -  Control-C will send the Telnet special Interrupt Process code;

        -  Control-Z will send the Telnet special Suspend Process code.

       You probably shouldn't enable this unless you know what you're
       doing.

4.30.4 `Return key sends Telnet New Line instead of ^M'

       Unlike most other remote login protocols, the Telnet protocol has
       a special `new line' code that is not the same as the usual line
       endings of Control-M or Control-J. By default, PuTTY sends the
       Telnet New Line code when you press Return, instead of sending
       Control-M as it does in most other protocols.

       Most Unix-style Telnet servers don't mind whether they receive
       Telnet New Line or Control-M; some servers do expect New Line,
       and some servers prefer to see ^M. If you are seeing surprising
       behaviour when you press Return in a Telnet session, you might try
       turning this option off to see if it helps.

  4.31 The Rlogin panel

       The Rlogin panel allows you to configure options that only apply to
       Rlogin sessions.

4.31.1 `Local username'

       Rlogin allows an automated (password-free) form of login by means
       of a file called `.rhosts' on the server. You put a line in your
       `.rhosts' file saying something like `jbloggs@pc1.example.com', and
       then when you make an Rlogin connection the client transmits the
       username of the user running the Rlogin client. The server checks
       the username and hostname against `.rhosts', and if they match it
       does not ask for a password.

       This only works because Unix systems contain a safeguard to stop a
       user from pretending to be another user in an Rlogin connection.
       Rlogin connections have to come from port numbers below 1024, and
       Unix systems prohibit this to unprivileged processes; so when the
       server sees a connection from a low-numbered port, it assumes the
       client end of the connection is held by a privileged (and therefore
       trusted) process, so it believes the claim of who the user is.

       Windows does not have this restriction: _any_ user can initiate
       an outgoing connection from a low-numbered port. Hence, the
       Rlogin `.rhosts' mechanism is completely useless for securely
       distinguishing several different users on a Windows machine. If you
       have a `.rhosts' entry pointing at a Windows PC, you should assume
       that _anyone_ using that PC can spoof your username in an Rlogin
       connection and access your account on the server.

       The `Local username' control allows you to specify what user name
       PuTTY should claim you have, in case it doesn't match your Windows
       user name (or in case you didn't bother to set up a Windows user
       name).

  4.32 The SUPDUP panel

       The SUPDUP panel allows you to configure options that only apply
       to SUPDUP sessions. See section 3.10 for more about the SUPDUP
       protocol.

4.32.1 `Location string'

       In SUPDUP, the client sends a piece of text of its choice to the
       server giving the user's location. This is typically displayed in
       lists of logged-in users.

       By default, PuTTY just defaults this to "The Internet". If you
       want your location to show up as something more specific, you can
       configure it here.

4.32.2 `Extended ASCII Character set'

       This declares what kind of character set extension your terminal
       supports. If the server supports it, it will send text using
       that character set. `None' means the standard 95 printable ASCII
       characters. `ITS' means ASCII extended with printable characters in
       the control character range. This character set is documented in the
       SUPDUP protocol definition. `WAITS' is similar to `ITS' but uses
       some alternative characters in the extended set: most prominently,
       it will display arrows instead of `^' and `_', and `}' instead of
       `~'. `ITS' extended ASCII is used by ITS and Lisp machines, whilst
       `WAITS' is only used by the WAITS operating system from the Stanford
       AI Laboratory.

4.32.3 `**MORE** processing'

       When **MORE** processing is enabled, the server causes output to
       pause at the bottom of the screen, until a space is typed.

4.32.4 `Terminal scrolling'

       This controls whether the terminal will perform scrolling when the
       cursor goes below the last line, or if the cursor will return to the
       first line.

  4.33 Storing configuration in a file

       PuTTY does not currently support storing its configuration in a file
       instead of the Registry. However, you can work around this with a
       couple of batch files.

       You will need a file called (say) `PUTTY.BAT' which imports the
       contents of a file into the Registry, then runs PuTTY, exports
       the contents of the Registry back into the file, and deletes the
       Registry entries. This can all be done using the Regedit command
       line options, so it's all automatic. Here is what you need in
       `PUTTY.BAT':

         @ECHO OFF
         regedit /s putty.reg
         regedit /s puttyrnd.reg
         start /w putty.exe
         regedit /ea new.reg HKEY_CURRENT_USER\Software\SimonTatham\PuTTY
         copy new.reg putty.reg
         del new.reg
         regedit /s puttydel.reg

       This batch file needs two auxiliary files: `PUTTYRND.REG' which sets
       up an initial safe location for the `PUTTY.RND' random seed file,
       and `PUTTYDEL.REG' which destroys everything in the Registry once
       it's been successfully saved back to the file.

       Here is `PUTTYDEL.REG':

         REGEDIT4
         
         [-HKEY_CURRENT_USER\Software\SimonTatham\PuTTY]

       Here is an example `PUTTYRND.REG' file:

         REGEDIT4
         
         [HKEY_CURRENT_USER\Software\SimonTatham\PuTTY]
         "RandSeedFile"="a:\\putty.rnd"

       You should replace `a:\putty.rnd' with the location where you want
       to store your random number data. If the aim is to carry around
       PuTTY and its settings on one USB stick, you probably want to store
       it on the USB stick.

Chapter 5: Using PSCP to transfer files securely
------------------------------------------------

       PSCP, the PuTTY Secure Copy client, is a tool for transferring files
       securely between computers using an SSH connection.

       If you have an SSH-2 server, you might prefer PSFTP (see chapter
       6) for interactive use. PSFTP does not in general work with SSH-1
       servers, however.

   5.1 Starting PSCP

       PSCP is a command line application. This means that you cannot just
       double-click on its icon to run it and instead you have to bring up
       a console window. With Windows 95, 98, and ME, this is called an
       `MS-DOS Prompt' and with Windows NT, 2000, and XP, it is called a
       `Command Prompt'. It should be available from the Programs section
       of your Start Menu.

       To start PSCP it will need either to be on your `PATH' or in your
       current directory. To add the directory containing PSCP to your
       `PATH' environment variable, type into the console window:

         set PATH=C:\path\to\putty\directory;%PATH%

       This will only work for the lifetime of that particular console
       window. To set your `PATH' more permanently on Windows NT, 2000, and
       XP, use the Environment tab of the System Control Panel. On Windows
       95, 98, and ME, you will need to edit your `AUTOEXEC.BAT' to include
       a `set' command like the one above.

   5.2 PSCP Usage

       Once you've got a console window to type into, you can type `pscp -
       h' to bring up a usage message. This tells you the version of PSCP
       you're using, and gives you a brief summary of how to use PSCP:

         C:\>pscp -h
         PuTTY Secure Copy client
         Release 0.83
         Usage: pscp [options] [user@]host:source target
                pscp [options] source [source...] [user@]host:target
                pscp [options] -ls [user@]host:filespec
         Options:
           -V        print version information and exit
           -pgpfp    print PGP key fingerprints and exit
           -p        preserve file attributes
           -q        quiet, don't show statistics
           -r        copy directories recursively
           -v        show verbose messages
           -load sessname  Load settings from saved session
           -P port   connect to specified port
           -l user   connect with specified username
           -pwfile file   login with password read from specified file
           -1 -2     force use of particular SSH protocol version
           -ssh -ssh-connection
                     force use of particular SSH protocol variant
           -4 -6     force use of IPv4 or IPv6
           -C        enable compression
           -i key    private key file for user authentication
           -noagent  disable use of Pageant
           -agent    enable use of Pageant
           -no-trivial-auth
                     disconnect if SSH authentication succeeds trivially
           -hostkey keyid
                     manually specify a host key (may be repeated)
           -batch    disable all interactive prompts
           -no-sanitise-stderr  don't strip control chars from standard error
           -proxycmd command
                     use 'command' as local proxy
           -unsafe   allow server-side wildcards (DANGEROUS)
           -sftp     force use of SFTP protocol
           -scp      force use of SCP protocol
           -sshlog file
           -sshrawlog file
                     log protocol details to a file
           -logoverwrite
           -logappend
                     control what happens when a log file already exists

       (PSCP's interface is much like the Unix `scp' command, if you're
       familiar with that.)

 5.2.1 The basics

       To receive (a) file(s) from a remote server:

         pscp [options] [user@]host:source target

       So to copy the file `/etc/hosts' from the server `example.com' as
       user `fred' to the file `c:\temp\example-hosts.txt', you would type:

         pscp fred@example.com:/etc/hosts c:\temp\example-hosts.txt

       To send (a) file(s) to a remote server:

         pscp [options] source [source...] [user@]host:target

       So to copy the local file `c:\documents\foo.txt' to the server
       `example.com' as user `fred' to the file `/tmp/foo' you would type:

         pscp c:\documents\foo.txt fred@example.com:/tmp/foo

       You can use wildcards to transfer multiple files in either
       direction, like this:

         pscp c:\documents\*.doc fred@example.com:docfiles
         pscp fred@example.com:source/*.c c:\source

       However, in the second case (using a wildcard for multiple remote
       files) you may see a warning saying something like `warning: remote
       host tried to write to a file called `terminal.c' when we requested
       a file called `*.c'. If this is a wildcard, consider upgrading to
       SSH-2 or using the `-unsafe' option. Renaming of this file has been
       disallowed'.

       This is due to a fundamental insecurity in the old-style SCP
       protocol: the client sends the wildcard string (`*.c') to the
       server, and the server sends back a sequence of file names that
       match the wildcard pattern. However, there is nothing to stop the
       server sending back a _different_ pattern and writing over one of
       your other files: if you request `*.c', the server might send back
       the file name `AUTOEXEC.BAT' and install a virus for you. Since the
       wildcard matching rules are decided by the server, the client cannot
       reliably verify that the filenames sent back match the pattern.

       PSCP will attempt to use the newer SFTP protocol (part of SSH-2)
       where possible, which does not suffer from this security flaw. If
       you are talking to an SSH-2 server which supports SFTP, you will
       never see this warning. (You can force use of the SFTP protocol, if
       available, with `-sftp' - see section 5.2.2.6.)

       If you really need to use a server-side wildcard with an SSH-1
       server, you can use the `-unsafe' command line option with PSCP:

         pscp -unsafe fred@example.com:source/*.c c:\source

       This will suppress the warning message and the file transfer will
       happen. However, you should be aware that by using this option you
       are giving the server the ability to write to _any_ file in the
       target directory, so you should only use this option if you trust
       the server administrator not to be malicious (and not to let the
       server machine be cracked by malicious people). Alternatively, do
       any such download in a newly created empty directory. (Even in
       `unsafe' mode, PSCP will still protect you against the server trying
       to get out of that directory using pathnames including `..'.)

5.2.1.1 `user'

       The login name on the remote server. If this is omitted, and `host'
       is a PuTTY saved session, PSCP will use any username specified by
       that saved session. Otherwise, PSCP will attempt to use the local
       Windows username.

5.2.1.2 `host'

       The name of the remote server, or the name of an existing PuTTY
       saved session. In the latter case, the session's settings for
       hostname, port number, cipher type and username will be used.

5.2.1.3 `source'

       One or more source files. Wildcards are allowed. The syntax of
       wildcards depends on the system to which they apply, so if you are
       copying _from_ a Windows system _to_ a UNIX system, you should use
       Windows wildcard syntax (e.g. `*.*'), but if you are copying _from_
       a UNIX system _to_ a Windows system, you would use the wildcard
       syntax allowed by your UNIX shell (e.g. `*').

       If the source is a remote server and you do not specify a full
       pathname (in UNIX, a pathname beginning with a `/' (slash)
       character), what you specify as a source will be interpreted
       relative to your home directory on the remote server.

5.2.1.4 `target'

       The filename or directory to put the file(s). When copying from a
       remote server to a local host, you may wish simply to place the
       file(s) in the current directory. To do this, you should specify a
       target of `.'. For example:

         pscp fred@example.com:/home/tom/.emacs .

       ...would copy `/home/tom/.emacs' on the remote server to the current
       directory.

       As with the `source' parameter, if the target is on a remote server
       and is not a full path name, it is interpreted relative to your home
       directory on the remote server.

 5.2.2 Options

       PSCP accepts all the general command line options supported by the
       PuTTY tools, except the ones which make no sense in a file transfer
       utility. See section 3.11.3 for a description of these options. (The
       ones not supported by PSCP are clearly marked.)

       PSCP also supports some of its own options. The following sections
       describe PSCP's specific command-line options.

5.2.2.1 `-ls' list remote files

       If the `-ls' option is given, no files are transferred; instead,
       remote files are listed. Only a hostname specification and optional
       remote file specification need be given. For example:

         pscp -ls fred@example.com:dir1

       The SCP protocol does not contain within itself a means of listing
       files. If SCP is in use, this option therefore assumes that the
       server responds appropriately to the command `ls -la'; this may not
       work with all servers.

       If SFTP is in use, this option should work with all servers.

5.2.2.2 `-p' preserve file attributes

       By default, files copied with PSCP are timestamped with the date
       and time they were copied. The `-p' option preserves the original
       timestamp on copied files.

5.2.2.3 `-q' quiet, don't show statistics

       By default, PSCP displays a meter displaying the progress of the
       current transfer:

         mibs.tar          |   168 kB |  84.0 kB/s | ETA: 00:00:13 |  13%

       The fields in this display are (from left to right), filename, size
       (in kilobytes) of file transferred so far, estimate of how fast the
       file is being transferred (in kilobytes per second), estimated time
       that the transfer will be complete, and percentage of the file so
       far transferred. The `-q' option to PSCP suppresses the printing of
       these statistics.

5.2.2.4 `-r' copies directories recursively

       By default, PSCP will only copy files. Any directories you specify
       to copy will be skipped, as will their contents. The `-r' option
       tells PSCP to descend into any directories you specify, and to copy
       them and their contents. This allows you to use PSCP to transfer
       whole directory structures between machines.

5.2.2.5 `-batch' avoid interactive prompts

       If you use the `-batch' option, PSCP will never give an interactive
       prompt while establishing the connection. If the server's host key
       is invalid, for example (see section 2.2), then the connection will
       simply be abandoned instead of asking you what to do next.

       This may help PSCP's behaviour when it is used in automated scripts:
       using `-batch', if something goes wrong at connection time, the
       batch job will fail rather than hang.

5.2.2.6 `-sftp', `-scp' force use of particular file transfer protocol

       As mentioned in section 5.2.1, there are two different file transfer
       protocols in use with SSH. Despite its name, PSCP (like many other
       ostensible scp clients) can use either of these protocols.

       The older SCP protocol does not have a written specification and
       leaves a lot of detail to the server platform. Wildcards are
       expanded on the server. The simple design means that any wildcard
       specification supported by the server platform (such as brace
       expansion) can be used, but also leads to interoperability issues
       such as with filename quoting (for instance, where filenames contain
       spaces), and also the security issue described in section 5.2.1.

       The newer SFTP protocol, which is usually associated with SSH-
       2 servers, is specified in a more platform independent way, and
       leaves issues such as wildcard syntax up to the client. (PuTTY's
       SFTP wildcard syntax is described in section 6.2.2.) This makes it
       more consistent across platforms, more suitable for scripting and
       automation, and avoids security issues with wildcard matching.

       Normally PSCP will attempt to use the SFTP protocol, and only fall
       back to the SCP protocol if SFTP is not available on the server.

       The `-scp' option forces PSCP to use the SCP protocol or quit.

       The `-sftp' option forces PSCP to use the SFTP protocol or quit.
       When this option is specified, PSCP looks harder for an SFTP server,
       which may allow use of SFTP with SSH-1 depending on server setup.

5.2.2.7 `-no-sanitise-stderr': control error message sanitisation

       The `-no-sanitise-stderr' option will cause PSCP to pass through the
       server's standard-error stream literally, without stripping control
       characters from it first. This might be useful if the server were
       sending coloured error messages, but it also gives the server the
       ability to have unexpected effects on your terminal display. For
       more discussion, see section 7.2.3.5.

 5.2.3 Return value

       PSCP returns an ERRORLEVEL of zero (success) only if the files were
       correctly transferred. You can test for this in a batch file, using
       code such as this:

         pscp file*.* user@hostname:
         if errorlevel 1 echo There was an error

 5.2.4 Using public key authentication with PSCP

       Like PuTTY, PSCP can authenticate using a public key instead of a
       password. There are three ways you can do this.

       Firstly, PSCP can use PuTTY saved sessions in place of hostnames
       (see section 5.2.1.2). So you would do this:

        -  Run PuTTY, and create a PuTTY saved session (see section 4.1.2)
           which specifies your private key file (see section 4.22.1). You
           will probably also want to specify a username to log in as (see
           section 4.15.1).

        -  In PSCP, you can now use the name of the session instead of
           a hostname: type `pscp sessionname:file localfile', where
           `sessionname' is replaced by the name of your saved session.

       Secondly, you can supply the name of a private key file on the
       command line, with the `-i' option. See section 3.11.3.18 for more
       information.

       Thirdly, PSCP will attempt to authenticate using Pageant if Pageant
       is running (see chapter 9). So you would do this:

        -  Ensure Pageant is running, and has your private key stored in
           it.

        -  Specify a user and host name to PSCP as normal. PSCP will
           automatically detect Pageant and try to use the keys within it.

       For more general information on public-key authentication, see
       chapter 8.

Chapter 6: Using PSFTP to transfer files securely
-------------------------------------------------

       PSFTP, the PuTTY SFTP client, is a tool for transferring files
       securely between computers using an SSH connection.

       PSFTP differs from PSCP in the following ways:

        -  PSCP should work on virtually every SSH server. PSFTP uses the
           new SFTP protocol, which is a feature of SSH-2 only. (PSCP
           will also use this protocol if it can, but there is an SSH-1
           equivalent it can fall back to if it cannot.)

        -  PSFTP allows you to run an interactive file transfer session,
           much like the Windows `ftp' program. You can list the contents
           of directories, browse around the file system, issue multiple
           `get' and `put' commands, and eventually log out. By contrast,
           PSCP is designed to do a single file transfer operation and
           immediately terminate.

   6.1 Starting PSFTP

       The usual way to start PSFTP is from a command prompt, much like
       PSCP. To do this, it will need either to be on your `PATH' or in
       your current directory. To add the directory containing PSFTP to
       your `PATH' environment variable, type into the console window:

         set PATH=C:\path\to\putty\directory;%PATH%

       Unlike PSCP, however, PSFTP has no complex command-line syntax; you
       just specify a host name and perhaps a user name:

         psftp server.example.com

       or perhaps

         psftp fred@server.example.com

       Alternatively, if you just type `psftp' on its own (or double-click
       the PSFTP icon in the Windows GUI), you will see the PSFTP prompt,
       and a message telling you PSFTP has not connected to any server:

         C:\>psftp
         psftp: no hostname specified; use "open host.name" to connect
         psftp>

       At this point you can type `open server.example.com' or
       `open fred@server.example.com' to start a session.

       PSFTP accepts all the general command line options supported by the
       PuTTY tools, except the ones which make no sense in a file transfer
       utility. See section 3.11.3 for a description of these options. (The
       ones not supported by PSFTP are clearly marked.)

       PSFTP also supports some of its own options. The following sections
       describe PSFTP's specific command-line options.

 6.1.1 `-b': specify a file containing batch commands

       In normal operation, PSFTP is an interactive program which displays
       a command line and accepts commands from the keyboard.

       If you need to do automated tasks with PSFTP, you would probably
       prefer to specify a set of commands in advance and have them
       executed automatically. The `-b' option allows you to do this. You
       use it with a file name containing batch commands. For example, you
       might create a file called `myscript.scr' containing lines like
       this:

         cd /home/ftp/users/jeff
         del jam-old.tar.gz
         ren jam.tar.gz jam-old.tar.gz
         put jam.tar.gz
         chmod a+r jam.tar.gz

       and then you could run the script by typing

         psftp user@hostname -b myscript.scr

       When you run a batch script in this way, PSFTP will abort the script
       if any command fails to complete successfully. To change this
       behaviour, you can add the `-be' option (section 6.1.3).

       PSFTP will terminate after it finishes executing the batch script.

 6.1.2 `-bc': display batch commands as they are run

       The `-bc' option alters what PSFTP displays while processing a
       batch script specified with `-b'. With the `-bc' option, PSFTP will
       display prompts and commands just as if the commands had been typed
       at the keyboard. So instead of seeing this:

         C:\>psftp fred@hostname -b batchfile
         Sent username "fred"
         Remote working directory is /home/fred
         Listing directory /home/fred/lib
         drwxrwsr-x    4 fred     fred         1024 Sep  6 10:42 .
         drwxr-sr-x   25 fred     fred         2048 Dec 14 09:36 ..
         drwxrwsr-x    3 fred     fred         1024 Apr 17  2000 jed
         lrwxrwxrwx    1 fred     fred           24 Apr 17  2000 timber
         drwxrwsr-x    2 fred     fred         1024 Mar 13  2000 trn

       you might see this:

         C:\>psftp fred@hostname -bc -b batchfile
         Sent username "fred"
         Remote working directory is /home/fred
         psftp> dir lib
         Listing directory /home/fred/lib
         drwxrwsr-x    4 fred     fred         1024 Sep  6 10:42 .
         drwxr-sr-x   25 fred     fred         2048 Dec 14 09:36 ..
         drwxrwsr-x    3 fred     fred         1024 Apr 17  2000 jed
         lrwxrwxrwx    1 fred     fred           24 Apr 17  2000 timber
         drwxrwsr-x    2 fred     fred         1024 Mar 13  2000 trn
         psftp> quit

 6.1.3 `-be': continue batch processing on errors

       When running a batch file, this additional option causes PSFTP
       to continue processing even if a command fails to complete
       successfully.

       You might want this to happen if you wanted to delete a file and
       didn't care if it was already not present, for example.

 6.1.4 `-batch': avoid interactive prompts

       If you use the `-batch' option, PSFTP will never give an interactive
       prompt while establishing the connection. If the server's host key
       is invalid, for example (see section 2.2), then the connection will
       simply be abandoned instead of asking you what to do next.

       This may help PSFTP's behaviour when it is used in automated
       scripts: using `-batch', if something goes wrong at connection time,
       the batch job will fail rather than hang.

6.1.4.1 `-no-sanitise-stderr': control error message sanitisation

       The `-no-sanitise-stderr' option will cause PSFTP to pass through
       the server's standard-error stream literally, without stripping
       control characters from it first. This might be useful if the server
       were sending coloured error messages, but it also gives the server
       the ability to have unexpected effects on your terminal display. For
       more discussion, see section 7.2.3.5.

   6.2 Running PSFTP

       Once you have started your PSFTP session, you will see a `psftp>'
       prompt. You can now type commands to perform file-transfer
       functions. This section lists all the available commands.

       Any line starting with a # will be treated as a comment and ignored.

 6.2.1 General quoting rules for PSFTP commands

       Most PSFTP commands are considered by the PSFTP command interpreter
       as a sequence of words, separated by spaces. For example, the
       command `ren oldfilename newfilename' splits up into three words:
       `ren' (the command name), `oldfilename' (the name of the file to be
       renamed), and `newfilename' (the new name to give the file).

       Sometimes you will need to specify file names that _contain_ spaces.
       In order to do this, you can surround the file name with double
       quotes. This works equally well for local file names and remote file
       names:

         psftp> get "spacey file name.txt" "save it under this name.txt"

       The double quotes themselves will not appear as part of the file
       names; they are removed by PSFTP and their only effect is to stop
       the spaces inside them from acting as word separators.

       If you need to _use_ a double quote (on some types of remote system,
       such as Unix, you are allowed to use double quotes in file names),
       you can do this by doubling it. This works both inside and outside
       double quotes. For example, this command

         psftp> ren ""this"" "a file with ""quotes"" in it"

       will take a file whose current name is `"this"' (with a double quote
       character at the beginning and the end) and rename it to a file
       whose name is `a file with "quotes" in it'.

       (The one exception to the PSFTP quoting rules is the `!' command,
       which passes its command line straight to Windows without splitting
       it up into words at all. See section 6.2.19.)

 6.2.2 Wildcards in PSFTP

       Several commands in PSFTP support `wildcards' to select multiple
       files.

       For _local_ file specifications (such as the first argument to
       `put'), wildcard rules for the local operating system are used. For
       instance, PSFTP running on Windows might require the use of `*.*'
       where PSFTP on Unix would need `*'.

       For _remote_ file specifications (such as the first argument to
       `get'), PSFTP uses a standard wildcard syntax (similar to POSIX
       wildcards):

        -  `*' matches any sequence of characters (including a zero-length
           sequence).

        -  `?' matches exactly one character.

        -  `[abc]' matches exactly one character which can be a, b, or c.

           `[a-z]' matches any character in the range a to z.

           `[^abc]' matches a single character that is _not_ a, b, or c.

           Special cases: `[-a]' matches a literal hyphen (-) or a; `[^-a]'
           matches all other characters. `[a^]' matches a literal caret (^)
           or a.

        -  `\' (backslash) before any of the above characters (or itself)
           removes that character's special meaning.

       A leading period (.) on a filename is not treated specially, unlike
       in some Unix contexts; `get *' will fetch all files, whether or not
       they start with a leading period.

 6.2.3 The `open' command: start a session

       If you started PSFTP by double-clicking in the GUI, or just by
       typing `psftp' at the command line, you will need to open a
       connection to an SFTP server before you can issue any other commands
       (except `help' and `quit').

       To create a connection, type `open host.name', or if you need to
       specify a user name as well you can type `open user@host.name'. You
       can optionally specify a port as well: `open user@host.name 22'.

       Once you have issued this command, you will not be able to issue it
       again, _even_ if the command fails (for example, if you mistype the
       host name or the connection times out). So if the connection is not
       opened successfully, PSFTP will terminate immediately.

 6.2.4 The `quit' command: end your session

       When you have finished your session, type the command `quit' to
       close the connection, terminate PSFTP and return to the command line
       (or just close the PSFTP console window if you started it from the
       GUI).

       You can also use the `bye' and `exit' commands, which have exactly
       the same effect.

 6.2.5 The `close' command: close your connection

       If you just want to close the network connection but keep PSFTP
       running, you can use the `close' command. You can then use the
       `open' command to open a new connection.

 6.2.6 The `help' command: get quick online help

       If you type `help', PSFTP will give a short list of the available
       commands.

       If you type `help' with a command name - for example, `help get'
       - then PSFTP will give a short piece of help on that particular
       command.

 6.2.7 The `cd' and `pwd' commands: changing the remote working directory

       PSFTP maintains a notion of your `working directory' on the server.
       This is the default directory that other commands will operate on.
       For example, if you type `get filename.dat' then PSFTP will look for
       `filename.dat' in your remote working directory on the server.

       To change your remote working directory, use the `cd' command. If
       you don't provide an argument, `cd' will return you to your home
       directory on the server (more precisely, the remote directory you
       were in at the start of the connection).

       To display your current remote working directory, type `pwd'.

 6.2.8 The `lcd' and `lpwd' commands: changing the local working directory

       As well as having a working directory on the remote server, PSFTP
       also has a working directory on your local machine (just like
       any other Windows process). This is the default local directory
       that other commands will operate on. For example, if you type
       `get filename.dat' then PSFTP will save the resulting file as
       `filename.dat' in your local working directory.

       To change your local working directory, use the `lcd' command. To
       display your current local working directory, type `lpwd'.

 6.2.9 The `get' command: fetch a file from the server

       To download a file from the server and store it on your local PC,
       you use the `get' command.

       In its simplest form, you just use this with a file name:

         get myfile.dat

       If you want to store the file locally under a different name,
       specify the local file name after the remote one:

         get myfile.dat newname.dat

       This will fetch the file on the server called `myfile.dat', but will
       save it to your local machine under the name `newname.dat'.

       To fetch an entire directory recursively, you can use the `-r'
       option:

         get -r mydir
         get -r mydir newname

       (If you want to fetch a file whose name starts with a hyphen, you
       may have to use the `--' special argument, which stops `get' from
       interpreting anything as a switch after it. For example, `get -- -
       silly-name-'.)

6.2.10 The `put' command: send a file to the server

       To upload a file to the server from your local PC, you use the `put'
       command.

       In its simplest form, you just use this with a file name:

         put myfile.dat

       If you want to store the file remotely under a different name,
       specify the remote file name after the local one:

         put myfile.dat newname.dat

       This will send the local file called `myfile.dat', but will store it
       on the server under the name `newname.dat'.

       To send an entire directory recursively, you can use the `-r'
       option:

         put -r mydir
         put -r mydir newname

       (If you want to send a file whose name starts with a hyphen, you
       may have to use the `--' special argument, which stops `put' from
       interpreting anything as a switch after it. For example, `put -- -
       silly-name-'.)

6.2.11 The `mget' and `mput' commands: fetch or send multiple files

       `mget' works almost exactly like `get', except that it allows you to
       specify more than one file to fetch at once. You can do this in two
       ways:

        -  by giving two or more explicit file names
           (`mget file1.txt file2.txt')

        -  by using a wildcard (`mget *.txt').

       Every argument to `mget' is treated as the name of a file to fetch
       (unlike `get', which will interpret at most one argument like
       that, and a second argument will be treated as an alternative name
       under which to store the retrieved file), or a wildcard expression
       matching more than one file.

       The `-r' and `--' options from `get' are also available with `mget'.

       `mput' is similar to `put', with the same differences.

6.2.12 The `reget' and `reput' commands: resuming file transfers

       If a file transfer fails half way through, and you end up with half
       the file stored on your disk, you can resume the file transfer using
       the `reget' and `reput' commands. These work exactly like the `get'
       and `put' commands, but they check for the presence of the half-
       written destination file and start transferring from where the last
       attempt left off.

       The syntax of `reget' and `reput' is exactly the same as the syntax
       of `get' and `put':

         reget myfile.dat
         reget myfile.dat newname.dat
         reget -r mydir

       These commands are intended mainly for resuming interrupted
       transfers. They assume that the remote file or directory structure
       has not changed in any way; if there have been changes, you may end
       up with corrupted files. In particular, the `-r' option will not
       pick up changes to files or directories already transferred in full.

6.2.13 The `dir' command: list remote files

       To list the files in your remote working directory, just type `dir'.

       You can also list the contents of a different directory by typing
       `dir' followed by the directory name:

         dir /home/fred
         dir sources

       And you can list a subset of the contents of a directory by
       providing a wildcard:

         dir /home/fred/*.txt
         dir sources/*.c

       The `ls' command works exactly the same way as `dir'.

6.2.14 The `chmod' command: change permissions on remote files

       PSFTP allows you to modify the file permissions on files and
       directories on the server. You do this using the `chmod' command,
       which works very much like the Unix `chmod' command.

       The basic syntax is `chmod modes file', where `modes' represents a
       modification to the file permissions, and `file' is the filename to
       modify. You can specify multiple files or wildcards. For example:

         chmod go-rwx,u+w privatefile
         chmod a+r public*
         chmod 640 groupfile1 groupfile2

       The `modes' parameter can be a set of octal digits in the Unix
       style. (If you don't know what this means, you probably don't want
       to be using it!) Alternatively, it can be a list of permission
       modifications, separated by commas. Each modification consists of:

        -  The people affected by the modification. This can be `u'
           (the owning user), `g' (members of the owning group), or `o'
           (everybody else - `others'), or some combination of those. It
           can also be `a' (`all') to affect everybody at once.

        -  A `+' or `-' sign, indicating whether permissions are to be
           added or removed.

        -  The actual permissions being added or removed. These can be
           `r' (permission to read the file), `w' (permission to write
           to the file), and `x' (permission to execute the file, or in
           the case of a directory, permission to access files within the
           directory).

       So the above examples would do:

        -  The first example: `go-rwx' removes read, write and execute
           permissions for members of the owning group and everybody else
           (so the only permissions left are the ones for the file owner).
           `u+w' adds write permission for the file owner.

        -  The second example: `a+r' adds read permission for everybody to
           all files and directories starting with `public'.

       In addition to all this, there are a few extra special cases for
       Unix systems. On non-Unix systems these are unlikely to be useful:

        -  You can specify `u+s' and `u-s' to add or remove the Unix set-
           user-ID bit. This is typically only useful for special purposes;
           refer to your Unix documentation if you're not sure about it.

        -  You can specify `g+s' and `g-s' to add or remove the Unix set-
           group-ID bit. On a file, this works similarly to the set-user-
           ID bit (see your Unix documentation again); on a directory it
           ensures that files created in the directory are accessible by
           members of the group that owns the directory.

        -  You can specify `+t' and `-t' to add or remove the Unix `sticky
           bit'. When applied to a directory, this means that the owner of
           a file in that directory can delete the file (whereas normally
           only the owner of the _directory_ would be allowed to).

6.2.15 The `del' command: delete remote files

       To delete a file on the server, type `del' and then the filename or
       filenames:

         del oldfile.dat
         del file1.txt file2.txt
         del *.o

       Files will be deleted without further prompting, even if multiple
       files are specified.

       `del' will only delete files. You cannot use it to delete
       directories; use `rmdir' for that.

       The `rm' command works exactly the same way as `del'.

6.2.16 The `mkdir' command: create remote directories

       To create a directory on the server, type `mkdir' and then the
       directory name:

         mkdir newstuff

       You can specify multiple directories to create at once:

         mkdir dir1 dir2 dir3

6.2.17 The `rmdir' command: remove remote directories

       To remove a directory on the server, type `rmdir' and then the
       directory name or names:

         rmdir oldstuff
         rmdir *.old ancient

       Directories will be deleted without further prompting, even if
       multiple directories are specified.

       Most SFTP servers will probably refuse to remove a directory if
       the directory has anything in it, so you will need to delete the
       contents first.

6.2.18 The `mv' command: move and rename remote files

       To rename a single file on the server, type `mv', then the current
       file name, and then the new file name:

         mv oldfile newname

       You can also move the file into a different directory and change the
       name:

         mv oldfile dir/newname

       To move one or more files into an existing subdirectory, specify
       the files (using wildcards if desired), and then the destination
       directory:

         mv file dir
         mv file1 dir1/file2 dir2
         mv *.c *.h ..

       The `rename' and `ren' commands work exactly the same way as `mv'.

6.2.19 The `!' command: run a local Windows command

       You can run local Windows commands using the `!' command. This is
       the only PSFTP command that is not subject to the command quoting
       rules given in section 6.2.1. If any command line begins with the
       `!' character, then the rest of the line will be passed straight to
       Windows without further translation.

       For example, if you want to move an existing copy of a file out of
       the way before downloading an updated version, you might type:

         psftp> !ren myfile.dat myfile.bak
         psftp> get myfile.dat

       using the Windows `ren' command to rename files on your local PC.

   6.3 Using public key authentication with PSFTP

       Like PuTTY, PSFTP can authenticate using a public key instead of a
       password. There are three ways you can do this.

       Firstly, PSFTP can use PuTTY saved sessions in place of hostnames.
       So you might do this:

        -  Run PuTTY, and create a PuTTY saved session (see section 4.1.2)
           which specifies your private key file (see section 4.22.1). You
           will probably also want to specify a username to log in as (see
           section 4.15.1).

        -  In PSFTP, you can now use the name of the session instead of
           a hostname: type `psftp sessionname', where `sessionname' is
           replaced by the name of your saved session.

       Secondly, you can supply the name of a private key file on the
       command line, with the `-i' option. See section 3.11.3.18 for more
       information.

       Thirdly, PSFTP will attempt to authenticate using Pageant if Pageant
       is running (see chapter 9). So you would do this:

        -  Ensure Pageant is running, and has your private key stored in
           it.

        -  Specify a user and host name to PSFTP as normal. PSFTP will
           automatically detect Pageant and try to use the keys within it.

       For more general information on public-key authentication, see
       chapter 8.

Chapter 7: Using the command-line connection tool Plink
-------------------------------------------------------

       Plink is a command-line connection tool similar to UNIX `ssh'. It is
       mostly used for automated operations, such as making CVS access a
       repository on a remote server.

       Plink is probably not what you want if you want to run an
       interactive session in a console window.

   7.1 Starting Plink

       Plink is a command line application. This means that you cannot just
       double-click on its icon to run it and instead you have to bring
       up a console window. In Windows 95, 98, and ME, this is called an
       `MS-DOS Prompt', and in Windows NT, 2000, and XP, it is called a
       `Command Prompt'. It should be available from the Programs section
       of your Start Menu.

       In order to use Plink, the file `plink.exe' will need either to be
       on your `PATH' or in your current directory. To add the directory
       containing Plink to your `PATH' environment variable, type into the
       console window:

         set PATH=C:\path\to\putty\directory;%PATH%

       This will only work for the lifetime of that particular console
       window. To set your `PATH' more permanently on Windows NT, 2000, and
       XP, use the Environment tab of the System Control Panel. On Windows
       95, 98, and ME, you will need to edit your `AUTOEXEC.BAT' to include
       a `set' command like the one above.

   7.2 Using Plink

       This section describes the basics of how to use Plink for
       interactive logins and for automated processes.

       Once you've got a console window to type into, you can type `plink -
       -help' to bring up a usage message. This tells you the version of
       Plink you're using, and gives you a brief summary of how to use
       Plink:

         C:\>plink --help
         Plink: command-line connection utility
         Release 0.83
         Usage: plink [options] [user@]host [command]
                ("host" can also be a PuTTY saved session name)
         Options:
           -V        print version information and exit
           -pgpfp    print PGP key fingerprints and exit
           -v        show verbose messages
           -load sessname  Load settings from saved session
           -ssh -telnet -rlogin -raw -serial
                     force use of a particular protocol
           -ssh-connection
                     force use of the bare ssh-connection protocol
           -P port   connect to specified port
           -l user   connect with specified username
           -batch    disable all interactive prompts
           -proxycmd command
                     use 'command' as local proxy
           -sercfg configuration-string (e.g. 19200,8,n,1,X)
                     Specify the serial configuration (serial only)
         The following options only apply to SSH connections:
           -pwfile file   login with password read from specified file
           -D [listen-IP:]listen-port
                     Dynamic SOCKS-based port forwarding
           -L [listen-IP:]listen-port:host:port
                     Forward local port to remote address
           -R [listen-IP:]listen-port:host:port
                     Forward remote port to local address
           -X -x     enable / disable X11 forwarding
           -A -a     enable / disable agent forwarding
           -t -T     enable / disable pty allocation
           -1 -2     force use of particular SSH protocol version
           -4 -6     force use of IPv4 or IPv6
           -C        enable compression
           -i key    private key file for user authentication
           -noagent  disable use of Pageant
           -agent    enable use of Pageant
           -no-trivial-auth
                     disconnect if SSH authentication succeeds trivially
           -noshare  disable use of connection sharing
           -share    enable use of connection sharing
           -hostkey keyid
                     manually specify a host key (may be repeated)
           -sanitise-stderr, -sanitise-stdout, -no-sanitise-stderr, -no-sanitise-stdout
                     do/don't strip control chars from standard output/error
           -no-antispoof   omit anti-spoofing prompt after authentication
           -m file   read remote command(s) from file
           -s        remote command is an SSH subsystem (SSH-2 only)
           -N        don't start a shell/command (SSH-2 only)
           -nc host:port
                     open tunnel in place of session (SSH-2 only)
           -sshlog file
           -sshrawlog file
                     log protocol details to a file
           -logoverwrite
           -logappend
                     control what happens when a log file already exists
           -shareexists
                     test whether a connection-sharing upstream exists

       Once this works, you are ready to use Plink.

 7.2.1 Using Plink for interactive logins

       To make a simple interactive connection to a remote server, just
       type `plink' and then the host name:

         C:\>plink login.example.com
         
         Debian GNU/Linux 2.2 flunky.example.com
         flunky login:

       You should then be able to log in as normal and run a session. The
       output sent by the server will be written straight to your command
       prompt window, which will most likely not interpret terminal control
       codes in the way the server expects it to. So if you run any full-
       screen applications, for example, you can expect to see strange
       characters appearing in your window. Interactive connections like
       this are not the main point of Plink.

       In order to connect with a different protocol, you can give the
       command line options `-ssh', `-ssh-connection', `-telnet', `-
       rlogin', or `-raw'. To make an SSH connection, for example:

         C:\>plink -ssh login.example.com
         login as:

       If you have already set up a PuTTY saved session, then instead of
       supplying a host name, you can give the saved session name. This
       allows you to use public-key authentication, specify a user name,
       and use most of the other features of PuTTY:

         C:\>plink my-ssh-session
         Sent username "fred"
         Authenticating with public key "fred@winbox"
         Last login: Thu Dec  6 19:25:33 2001 from :0.0
         fred@flunky:~$

       (You can also use the `-load' command-line option to load a saved
       session; see section 3.11.3.1. If you use `-load', the saved session
       exists, and it specifies a hostname, you cannot also specify a
       `host' or `user@host' argument - it will be treated as part of the
       remote command.)

 7.2.2 Using Plink for automated connections

       More typically Plink is used with the SSH protocol, to enable you
       to talk directly to a program running on the server. To do this you
       have to ensure Plink is _using_ the SSH protocol. You can do this in
       several ways:

        -  Use the `-ssh' option as described in section 7.2.1.

        -  Set up a PuTTY saved session that describes the server you are
           connecting to, and that also specifies the protocol as SSH.

        -  Set the Windows environment variable `PLINK_PROTOCOL' to the
           word `ssh'.

       Usually Plink is not invoked directly by a user, but run
       automatically by another process. Therefore you typically do not
       want Plink to prompt you for a user name or a password.

       Next, you are likely to need to avoid the various interactive
       prompts Plink can produce. You might be prompted to verify the host
       key of the server you're connecting to, to enter a user name, or to
       enter a password.

       To avoid being prompted for the server host key when using Plink for
       an automated connection, you can first make a _manual_ connection
       (using either of PuTTY or Plink) to the same server, verify the host
       key (see section 2.2 for more information), and select `Accept'
       to add the host key to the Registry. After that, Plink commands
       connecting to that server should not give a host key prompt unless
       the host key changes. Alternatively, you can specify the appropriate
       host key(s) on Plink's command line every time you use it; see
       section 3.11.3.22.

       To avoid being prompted for a user name, you can:

        -  Use the `-l' option to specify a user name on the command line.
           For example, `plink login.example.com -l fred'.

        -  Set up a PuTTY saved session that describes the server you are
           connecting to, and that also specifies the username to log in as
           (see section 4.15.1).

       To avoid being prompted for a password, you should almost certainly
       set up public-key authentication. (See chapter 8 for a general
       introduction to public-key authentication.) Again, you can do this
       in two ways:

        -  Set up a PuTTY saved session that describes the server you
           are connecting to, and that also specifies a private key file
           (see section 4.22.1). For this to work without prompting, your
           private key will need to have no passphrase.

        -  Store the private key in Pageant. See chapter 9 for further
           information.

       Once you have done all this, you should be able to run a remote
       command on the SSH server machine and have it execute automatically
       with no prompting:

         C:\>plink login.example.com -l fred echo hello, world
         hello, world
         
         C:\>

       Or, if you have set up a saved session with all the connection
       details:

         C:\>plink mysession echo hello, world
         hello, world
         
         C:\>

       Then you can set up other programs to run this Plink command and
       talk to it as if it were a process on the server machine.

 7.2.3 Plink command line options

       Plink accepts all the general command line options supported by the
       PuTTY tools. See section 3.11.3 for a description of these options.

       Plink also supports some of its own options. The following sections
       describe Plink's specific command-line options.

7.2.3.1 `-batch': disable all interactive prompts

       If you use the `-batch' option, Plink will never give an interactive
       prompt while establishing the connection. If the server's host key
       is invalid, for example (see section 2.2), then the connection will
       simply be abandoned instead of asking you what to do next.

       This may help Plink's behaviour when it is used in automated
       scripts: using `-batch', if something goes wrong at connection time,
       the batch job will fail rather than hang.

       If another program is invoking Plink on your behalf, then you might
       need to arrange that that program passes `-batch' to Plink. See
       section 7.4 for an example involving Git.

7.2.3.2 `-s': remote command is SSH subsystem

       If you specify the `-s' option, Plink passes the specified command
       as the name of an SSH `subsystem' rather than an ordinary command
       line.

       (This option is only meaningful with the SSH-2 protocol.)

7.2.3.3 `-share': Test and try to share an existing connection.

       This option tries to detect if an existing connection can be shared
       (See section 4.17.5 for more information about SSH connection
       sharing.) and reuses that connection.

       A Plink invocation of the form:

         plink -share <session>

       will test whether there is currently a viable `upstream' for the
       session in question, which can be specified using any syntax you'd
       normally use with Plink to make an actual connection (a host/port
       number, a bare saved session name, `-load', etc). If no `upstream'
       viable session is found and `-share' is specified, this connection
       will be become the `upstream' connection for subsequent connection
       sharing tries.

       (This option is only meaningful with the SSH-2 protocol.)

7.2.3.4 `-shareexists': test for connection-sharing upstream

       This option does not make a new connection; instead it allows
       testing for the presence of an existing connection that can
       be shared. (See section 4.17.5 for more information about SSH
       connection sharing.)

       A Plink invocation of the form:

         plink -shareexists <session>

       will test whether there is currently a viable `upstream' for the
       session in question, which can be specified using any syntax you'd
       normally use with Plink to make an actual connection (a host/port
       number, a bare saved session name, `-load', etc). It returns a zero
       exit status if a usable `upstream' exists, nonzero otherwise.

       (This option is only meaningful with the SSH-2 protocol.)

7.2.3.5 `-sanitise-'_stream_: control output sanitisation

       In some situations, Plink applies a sanitisation pass to the output
       received from the server, to strip out control characters such as
       backspace and the escape character.

       The idea of this is to prevent remote processes from sending
       confusing escape sequences through the standard error channel when
       Plink is being used as a transport for something like git or CVS. If
       the server actually wants to send an error message, it will probably
       be plain text; if the server abuses that channel to try to write
       over unexpected parts of your terminal display, Plink will try to
       stop it.

       By default, this only happens for output channels which are sent
       to a Windows console device, or a Unix terminal device. (Any
       output stream going somewhere else is likely to be needed by an 8-
       bit protocol and must not be tampered with at all.) It also stops
       happening if you tell Plink to allocate a remote pseudo-terminal
       (see section 3.11.3.12 and section 4.24.1), on the basis that in
       that situation you often _want_ escape sequences from the server to
       go to your terminal.

       But in case Plink guesses wrong about whether you want this
       sanitisation, you can override it in either direction, using one of
       these options:

       `-sanitise-stderr'

           Sanitise server data written to Plink's standard error channel,
           regardless of terminals and consoles and remote ptys.

       `-no-sanitise-stderr'

           Do not sanitise server data written to Plink's standard error
           channel.

       `-sanitise-stdout'

           Sanitise server data written to Plink's standard output channel.

       `-no-sanitise-stdout'

           Do not sanitise server data written to Plink's standard output
           channel.

7.2.3.6 -no-antispoof: turn off authentication spoofing protection prompt

       In SSH, some possible server authentication methods require user
       input (for example, password authentication, or entering a private
       key passphrase), and others do not (e.g. a private key held in
       Pageant).

       If you use Plink to run an interactive login session, and if Plink
       authenticates without needing any user interaction, and if the
       server is malicious or compromised, it could try to trick you into
       giving it authentication data that should not go to the server (such
       as your private key passphrase), by sending what _looks_ like one of
       Plink's local prompts, as if Plink had not already authenticated.

       To protect against this, Plink's default policy is to finish the
       authentication phase with a final trivial prompt looking like this:

         Access granted. Press Return to begin session.

       so that if you saw anything that looked like an authentication
       prompt _after_ that line, you would know it was not from Plink.

       That extra interactive step is inconvenient. So Plink will turn it
       off in as many situations as it can:

        -  If Plink's standard input is not pointing at a console or
           terminal device - for example, if you're using Plink as a
           transport for some automated application like version control
           - then you _can't_ type passphrases into the server anyway. In
           that situation, Plink won't try to protect you from the server
           trying to fool you into doing so.

        -  If Plink is in batch mode (see section 7.2.2), then it _never_
           does any interactive authentication. So anything looking like an
           interactive authentication prompt is automatically suspect, and
           so Plink omits the anti-spoofing prompt.

       But if you still find the protective prompt inconvenient, and you
       trust the server not to try a trick like this, you can turn it off
       using the `-no-antispoof' option.

   7.3 Using Plink in batch files and scripts

       Once you have set up Plink to be able to log in to a remote server
       without any interactive prompting (see section 7.2.2), you can use
       it for lots of scripting and batch purposes. For example, to start a
       backup on a remote machine, you might use a command like:

         plink root@myserver /etc/backups/do-backup.sh

       Or perhaps you want to fetch all system log lines relating to a
       particular web area:

         plink mysession grep /~fred/ /var/log/httpd/access.log > fredlog

       Any non-interactive command you could usefully run on the server
       command line, you can run in a batch file using Plink in this way.

   7.4 Using Plink with Git

       To use Plink for Git operations performed over SSH, you can set the
       environment variable `GIT_SSH_COMMAND' to point to Plink.

       For example, if you've run PuTTY's full Windows installer and it has
       installed Plink in the default location, you might do this:

         set GIT_SSH_COMMAND="C:\Program Files\PuTTY\plink.exe"

       or if you've put Plink somewhere else then you can do a similar
       thing with a different path.

       This environment variable accepts a whole command line, not just an
       executable file name. So you can add Plink options to the end of
       it if you like. For example, if you're using Git in a batch-mode
       context, where your Git jobs are running unattended and nobody is
       available to answer interactive prompts, you might also append the
       `-batch' option (section 7.2.3.1):

         set GIT_SSH_COMMAND="C:\Program Files\PuTTY\plink.exe" -batch

       and then if Plink unexpectedly prints a prompt of some kind (for
       example, because the SSH server's host key has changed), your batch
       job will terminate with an error message, instead of stopping and
       waiting for user input that will never arrive.

       (However, you don't _always_ want to do this with Git. If you're
       using Git interactively, you might _want_ Plink to stop for
       interactive prompts - for example, to let you enter a password for
       the SSH server.)

   7.5 Using Plink with CVS

       To use Plink with CVS, you need to set the environment variable
       `CVS_RSH' to point to Plink:

         set CVS_RSH=\path\to\plink.exe

       You also need to arrange to be able to connect to a remote host
       without any interactive prompts, as described in section 7.2.2.

       You should then be able to run CVS as follows:

         cvs -d :ext:user@sessionname:/path/to/repository co module

       If you specified a username in your saved session, you don't even
       need to specify the `user' part of this, and you can just say:

         cvs -d :ext:sessionname:/path/to/repository co module

   7.6 Using Plink with WinCVS

       Plink can also be used with WinCVS. Firstly, arrange for Plink to be
       able to connect to a remote host non-interactively, as described in
       section 7.2.2.

       Then, in WinCVS, bring up the `Preferences' dialogue box from the
       _Admin_ menu, and switch to the `Ports' tab. Tick the box there
       labelled `Check for an alternate rsh name' and in the text entry
       field to the right enter the full path to `plink.exe'. Select `OK'
       on the `Preferences' dialogue box.

       Next, select `Command Line' from the WinCVS `Admin' menu, and type a
       CVS command as in section 7.5, for example:

         cvs -d :ext:user@hostname:/path/to/repository co module

       or (if you're using a saved session):

         cvs -d :ext:user@sessionname:/path/to/repository co module

       Select the folder you want to check out to with the `Change Folder'
       button, and click `OK' to check out your module. Once you've got
       modules checked out, WinCVS will happily invoke plink from the GUI
       for CVS operations.

Chapter 8: Using public keys for SSH authentication
---------------------------------------------------

   8.1 Public key authentication - an introduction

       Public key authentication is an alternative means of identifying
       yourself to a login server, instead of typing a password. It is more
       secure and more flexible, but more difficult to set up.

       In conventional password authentication, you prove you are who you
       claim to be by proving that you know the correct password. The
       only way to prove you know the password is to tell the server what
       you think the password is. This means that if the server has been
       hacked, or _spoofed_ (see section 2.2), an attacker can learn your
       password.

       Public key authentication solves this problem. You generate a _key
       pair_, consisting of a public key (which everybody is allowed to
       know) and a private key (which you keep secret and do not give
       to anybody). The private key is able to generate _signatures_. A
       signature created using your private key cannot be forged by anybody
       who does not have that key; but anybody who has your public key can
       verify that a particular signature is genuine.

       So you generate a key pair on your own computer, and you copy the
       public key to the server. Then, when the server asks you to prove
       who you are, PuTTY can generate a signature using your private key.
       The server can verify that signature (since it has your public key)
       and allow you to log in. Now if the server is hacked or spoofed, the
       attacker does not gain your private key or password; they only gain
       one signature. And signatures cannot be re-used, so they have gained
       nothing.

       There is a problem with this: if your private key is stored
       unprotected on your own computer, then anybody who gains access to
       _that_ will be able to generate signatures as if they were you. So
       they will be able to log in to your server under your account. For
       this reason, your private key is usually _encrypted_ when it is
       stored on your local machine, using a passphrase of your choice. In
       order to generate a signature, PuTTY must decrypt the key, so you
       have to type your passphrase.

       This can make public-key authentication less convenient than
       password authentication: every time you log in to the server,
       instead of typing a short password, you have to type a longer
       passphrase. One solution to this is to use an _authentication
       agent_, a separate program which holds decrypted private keys and
       generates signatures on request. PuTTY's authentication agent is
       called Pageant. When you begin a Windows session, you start Pageant
       and load your private key into it (typing your passphrase once).
       For the rest of your session, you can start PuTTY any number of
       times and Pageant will automatically generate signatures without you
       having to do anything. When you close your Windows session, Pageant
       shuts down, without ever having stored your decrypted private key on
       disk. Many people feel this is a good compromise between security
       and convenience. See chapter 9 for further details.

       There is more than one public-key algorithm available. The most
       common are RSA and ECDSA, but others exist, notably DSA (otherwise
       known as DSS), the USA's federal Digital Signature Standard. The key
       types supported by PuTTY are described in section 8.2.2.

   8.2 Using PuTTYgen, the PuTTY key generator

       PuTTYgen is a key generator. It generates pairs of public and
       private keys to be used with PuTTY, PSCP, PSFTP, and Plink, as well
       as the PuTTY authentication agent, Pageant (see chapter 9). PuTTYgen
       generates RSA, DSA, ECDSA, and EdDSA keys.

       When you run PuTTYgen you will see a window where you have two main
       choices: `Generate', to generate a new public/private key pair, or
       `Load' to load in an existing private key.

 8.2.1 Generating a new key

       This is a general outline of the procedure for generating a new key
       pair. The following sections describe the process in more detail.

        -  First, you need to select which type of key you want to
           generate, and also select the strength of the key. This is
           described in more detail in section 8.2.2 and section 8.2.3.

        -  Then press the `Generate' button, to actually generate the key.
           Section 8.2.5 describes this step.

        -  Once you have generated the key, select a comment field (section
           8.2.7) and a passphrase (section 8.2.8).

        -  Now you're ready to save the private key to disk; press the
           `Save private key' button. (See section 8.2.10).

       Your key pair is now ready for use. You may also want to copy the
       public key to your server, either by copying it out of the `Public
       key for pasting into OpenSSH authorized_keys file' box (see section
       8.2.12), or by using the `Save public key' button (section 8.2.11).
       However, you don't need to do this immediately; if you want, you can
       load the private key back into PuTTYgen later (see section 8.2.14)
       and the public key will be available for copying and pasting again.

       Section 8.3 describes the typical process of configuring PuTTY to
       attempt public-key authentication, and configuring your SSH server
       to accept it.

 8.2.2 Selecting the type of key

       Before generating a key pair using PuTTYgen, you need to select
       which type of key you need.

       The current version of the SSH protocol, SSH-2, supports several
       different key types, although specific servers may not support all
       of them. PuTTYgen can generate:

        -  An RSA key for use with the SSH-2 protocol.

        -  A DSA key for use with the SSH-2 protocol.

        -  An ECDSA (elliptic curve DSA) key for use with the SSH-2
           protocol.

        -  An EdDSA key (Edwards-curve DSA, another elliptic curve
           algorithm) for use with the SSH-2 protocol.

       PuTTYgen can also generate an RSA key suitable for use with the
       old SSH-1 protocol (which only supports RSA); for this, you need
       to select the `SSH-1 (RSA)' option. Since the SSH-1 protocol is no
       longer considered secure, it's rare to need this option.

 8.2.3 Selecting the size (strength) of the key

       The `Number of bits' input box allows you to choose the strength of
       the key PuTTYgen will generate.

        -  For RSA and DSA, 2048 bits should currently be sufficient for
           most purposes. (Smaller keys of these types are no longer
           considered secure, and PuTTYgen will warn if you try to generate
           them.)

        -  For ECDSA, only 256, 384, and 521 bits are supported,
           corresponding to NIST-standardised elliptic curves. (Elliptic-
           curve keys do not need as many bits as RSA keys for equivalent
           security, so these numbers are smaller than the RSA
           recommendations.)

        -  For EdDSA, the only valid sizes are 255 bits (these keys are
           also known as `Ed25519' and are commonly used) and 448 bits
           (`Ed448', which is much less common at the time of writing).
           (256 is also accepted for backward compatibility, but the effect
           is the same as 255.)

 8.2.4 Selecting the prime generation method

       (This is entirely optional. Unless you know better, it's entirely
       sensible to skip this and use the default settings.)

       On the `Key' menu, you can also optionally change the method for
       generating the prime numbers used in the generated key. This is
       used for RSA and DSA keys only. (The other key types don't require
       generating prime numbers at all.)

       The prime-generation method does not affect compatibility: a key
       generated with any of these methods will still work with all the
       same SSH servers.

       The available methods are:

        -  Use probable primes (fast)

        -  Use proven primes (slower)

        -  Use proven primes with even distribution (slowest)

       The `probable primes' method sounds unsafe, but it's the most
       commonly used prime-generation strategy. There is in theory a
       possibility that it might accidentally generate a number that
       isn't prime, but the software does enough checking to make that
       probability vanishingly small (less than 1 in 2^80, or 1 in 10^24).
       So, in practice, nobody worries about it very much.

       The other methods cause PuTTYgen to use numbers that it is _sure_
       are prime, because it generates the output number together with a
       proof of its primality. This takes more effort, but it eliminates
       that theoretical risk in the probabilistic method.

       There in one way in which PuTTYgen's `proven primes' method is
       not strictly better than its `probable primes' method. If you use
       PuTTYgen to generate an RSA key on a computer that is potentially
       susceptible to timing- or cache-based side-channel attacks, such
       as a shared computer, the `probable primes' method is designed to
       resist such attacks, whereas the `proven primes' methods are not.
       (This is only a concern for RSA keys; for other key types, primes
       are either not secret or not involved.)

       You might choose to switch from probable to proven primes if you
       have a local security standard that demands it, or if you don't
       trust the probabilistic argument for the safety of the usual method.

       For RSA keys, there's also an option on the `Key' menu to use
       `strong' primes as the prime factors of the public key. A `strong'
       prime is a prime number chosen to have a particular structure that
       makes certain factoring algorithms more difficult to apply, so some
       security standards recommend their use. However, the most modern
       factoring algorithms are unaffected, so this option is probably not
       worth turning on _unless_ you have a local standard that recommends
       it.

 8.2.5 The `Generate' button

       Once you have chosen the type of key you want, and the strength of
       the key, press the `Generate' button and PuTTYgen will begin the
       process of actually generating the key.

       First, a progress bar will appear and PuTTYgen will ask you to move
       the mouse around to generate randomness. Wave the mouse in circles
       over the blank area in the PuTTYgen window, and the progress bar
       will gradually fill up as PuTTYgen collects enough randomness. You
       don't need to wave the mouse in particularly imaginative patterns
       (although it can't hurt); PuTTYgen will collect enough randomness
       just from the fine detail of _exactly_ how far the mouse has moved
       each time Windows samples its position.

       When the progress bar reaches the end, PuTTYgen will begin creating
       the key. The progress bar will reset to the start, and gradually
       move up again to track the progress of the key generation. It will
       not move evenly, and may occasionally slow down to a stop; this
       is unfortunately unavoidable, because key generation is a random
       process and it is impossible to reliably predict how long it will
       take.

       When the key generation is complete, a new set of controls will
       appear in the window to indicate this.

 8.2.6 The `Key fingerprint' box

       The `Key fingerprint' box shows you a fingerprint value for the
       generated key. This is derived cryptographically from the _public_
       key value, so it doesn't need to be kept secret; it is supposed to
       be more manageable for human beings than the public key itself.

       The fingerprint value is intended to be cryptographically secure,
       in the sense that it is computationally infeasible for someone to
       invent a second key with the same fingerprint, or to find a key with
       a particular fingerprint. So some utilities, such as the Pageant key
       list box (see section 9.2.1) and the Unix `ssh-add' utility, will
       list key fingerprints rather than the whole public key.

       By default, PuTTYgen will display SSH-2 key fingerprints in the
       `SHA256' format. If you need to see the fingerprint in the older
       `MD5' format (which looks like `aa:bb:cc:...'), you can choose `Show
       fingerprint as MD5' from the `Key' menu, but bear in mind that this
       is less cryptographically secure; it may be feasible for an attacker
       to create a key with the same fingerprint as yours.

 8.2.7 Setting a comment for your key

       If you have more than one key and use them for different purposes,
       you don't need to memorise the key fingerprints in order to tell
       them apart. PuTTYgen allows you to enter a _comment_ for your key,
       which will be displayed whenever PuTTY or Pageant asks you for the
       passphrase.

       The default comment format, if you don't specify one, contains the
       key type and the date of generation, such as `rsa-key-20011212'.
       Another commonly used approach is to use your name and the name of
       the computer the key will be used on, such as `simon@simons-pc'.

       To alter the key comment, just type your comment text into the `Key
       comment' box before saving the private key. If you want to change
       the comment later, you can load the private key back into PuTTYgen,
       change the comment, and save it again.

 8.2.8 Setting a passphrase for your key

       The `Key passphrase' and `Confirm passphrase' boxes allow you to
       choose a passphrase for your key. The passphrase will be used to
       encrypt the key on disk, so you will not be able to use the key
       without first entering the passphrase.

       When you save the key, PuTTYgen will check that the `Key passphrase'
       and `Confirm passphrase' boxes both contain exactly the same
       passphrase, and will refuse to save the key otherwise.

       If you leave the passphrase fields blank, the key will be saved
       unencrypted. You should _not_ do this without good reason; if you
       do, your private key file on disk will be all an attacker needs to
       gain access to any machine configured to accept that key. If you
       want to be able to log in without having to type a passphrase every
       time, you should consider using Pageant (chapter 9) so that your
       decrypted key is only held in memory rather than on disk.

       Under special circumstances you may genuinely _need_ to use a key
       with no passphrase; for example, if you need to run an automated
       batch script that needs to make an SSH connection, you can't be
       there to type the passphrase. In this case we recommend you generate
       a special key for each specific batch script (or whatever) that
       needs one, and on the server side you should arrange that each
       key is _restricted_ so that it can only be used for that specific
       purpose. The documentation for your SSH server should explain how to
       do this (it will probably vary between servers).

       Choosing a good passphrase is difficult. Just as you shouldn't use
       a dictionary word as a password because it's easy for an attacker
       to run through a whole dictionary, you should not use a song
       lyric, quotation or other well-known sentence as a passphrase.
       DiceWare (www.diceware.com) recommends using at least five words
       each generated randomly by rolling five dice, which gives over
       2^64 possible passphrases and is probably not a bad scheme. If you
       want your passphrase to make grammatical sense, this cuts down the
       possibilities a lot and you should use a longer one as a result.

       _Do not forget your passphrase_. There is no way to recover it.

 8.2.9 Adding a certificate to your key

       In some environments, user authentication keys can be signed in turn
       by a `certifying authority' (`CA' for short), and user accounts
       on an SSH server can be configured to automatically trust any key
       that's certified by the right signature.

       This can be a convenient setup if you have a very large number of
       servers. When you change your key pair, you might otherwise have to
       edit the authorized_keys file on every server individually, to make
       them all accept the new key. But if instead you configure all those
       servers _once_ to accept keys signed as yours by a CA, then when you
       change your public key, all you have to do is to get the new key
       certified by the same CA as before, and then all your servers will
       automatically accept it without needing individual reconfiguration.

       To get your key signed by a CA, you'll probably send the CA the new
       _public_ key (not the private half), and get back a modified version
       of the public key with the certificate included.

       If you want to incorporate the certificate into your PPK file for
       convenience, you can use the `Add certificate to key' menu option in
       PuTTYgen's `Key' menu. This will give you a single file containing
       your private key and the certificate, which is everything you need
       to authenticate to a server prepared to accept that certificate.

       To remove the certificate again and restore the uncertified PPK
       file, there's also a `Remove certificate from key' option.

       (However, you don't _have_ to incorporate the certificate into
       your PPK file. You can equally well use it separately, via the
       `Certificate to use with the private key' option in PuTTY itself.
       See section 4.22.2. It's up to you which you find more convenient.)

       When the currently loaded key in PuTTYgen contains a certificate,
       the large `Public key for pasting' edit box (see section 8.2.12)
       is replaced by a button that brings up an information box telling
       you about the certificate, such as who it certifies your key as
       belonging to, when it expires (if ever), and the fingerprint of the
       CA key that signed it in turn.

8.2.10 Saving your private key to a disk file

       Once you have generated a key, set a comment field and set a
       passphrase, you are ready to save your private key to disk.

       Press the `Save private key' button. PuTTYgen will put up a dialog
       box asking you where to save the file. Select a directory, type in a
       file name, and press `Save'.

       This file is in PuTTY's native format (`*.PPK'); it is the one you
       will need to tell PuTTY to use for authentication (see section
       4.22.1) or tell Pageant to load (see section 9.2.2).

       (You can optionally change some details of the PPK format for your
       saved key files; see section 8.2.13. But the defaults should be fine
       for most purposes.)

8.2.11 Saving your public key to a disk file

       RFC 4716 specifies a standard format for storing SSH-2 public keys
       on disk. Some SSH servers (such as ssh.com's) require a public
       key in this format in order to accept authentication with the
       corresponding private key. (Others, such as OpenSSH, use a different
       format; see section 8.2.12.)

       To save your public key in the SSH-2 standard format, press the
       `Save public key' button in PuTTYgen. PuTTYgen will put up a dialog
       box asking you where to save the file. Select a directory, type in a
       file name, and press `Save'.

       You will then probably want to copy the public key file to your
       SSH server machine. See section 8.3 for general instructions on
       configuring public-key authentication once you have generated a key.

       If you use this option with an SSH-1 key, the file PuTTYgen saves
       will contain exactly the same text that appears in the `Public key
       for pasting' box. This is the only existing standard for SSH-1
       public keys.

8.2.12 `Public key for pasting into OpenSSH authorized_keys file'

       The OpenSSH server, among others, requires your public key
       to be given to it in a one-line format before it will accept
       authentication with your private key. (SSH-1 servers also used this
       method.)

       The `Public key for pasting into OpenSSH authorized_keys file' gives
       the public-key data in the correct one-line format. Typically you
       will want to select the entire contents of the box using the mouse,
       press Ctrl+C to copy it to the clipboard, and then paste the data
       into a PuTTY session which is already connected to the server.

       See section 8.3 for general instructions on configuring public-key
       authentication once you have generated a key.

8.2.13 Parameters for saving key files

       Selecting `Parameters for saving key files...' from the `Key'
       menu lets you adjust some aspects of PPK-format private key files
       stored on disk. None of these options affect compatibility with SSH
       servers.

       In most cases, it's entirely sensible to leave all of these at their
       default settings.

8.2.13.1 PPK file version

       This defaults to version 3, which is fine for most uses.

       You might need to select PPK version 2 if you need your private key
       file to be loadable in older versions of PuTTY (0.74 and older), or
       in other tools which do not yet support the version 3 format (which
       was introduced in 2021).

       The version 2 format is less resistant to brute-force decryption,
       and doesn't support any of the following options to control that.

8.2.13.2 Options affecting passphrase hashing

       All of the following options only affect keys saved with
       passphrases. They control how much work is required to decrypt the
       key (which happens every time you type its passphrase). This allows
       you to trade off the cost of legitimate use of the key against the
       resistance of the encrypted key to password-guessing attacks.

       These options only affect PPK version 3.

       Key derivation function

           The variant of the Argon2 key derivation function to use. You
           might change this if you consider your exposure to side-channel
           attacks to be different to the norm.

       Memory to use for passphrase hash

           The amount of memory needed to decrypt the key, in Kbyte.

       Time to use for passphrase hash

           Controls how much time is required to attempt decrypting the
           key. You can either specify an approximate time in milliseconds
           (on this machine), or explicitly specify a number of hash passes
           (which is what the time is turned into during encryption).

       Parallelism for passphrase hash

           Number of parallelisable threads that can be used to decrypt the
           key. The default, 1, forces the process to run single-threaded,
           even on machines with multiple cores.

8.2.14 Reloading a private key

       PuTTYgen allows you to load an existing private key file into
       memory. If you do this, you can then change the passphrase and
       comment before saving it again; you can also make extra copies of
       the public key.

       To load an existing key, press the `Load' button. PuTTYgen will put
       up a dialog box where you can browse around the file system and find
       your key file. Once you select the file, PuTTYgen will ask you for a
       passphrase (if necessary) and will then display the key details in
       the same way as if it had just generated the key.

       If you use the Load command to load a foreign key format, it will
       work, but you will see a message box warning you that the key you
       have loaded is not a PuTTY native key. See section 8.2.15 for
       information about importing foreign key formats.

8.2.15 Dealing with private keys in other formats

       SSH-2 private keys have no standard format. OpenSSH and ssh.com
       have different formats, and PuTTY's is different again. So a key
       generated with one client cannot immediately be used with another.

       Using the `Import' command from the `Conversions' menu, PuTTYgen can
       load SSH-2 private keys in OpenSSH's format and ssh.com's format.
       Once you have loaded one of these key types, you can then save it
       back out as a PuTTY-format key (`*.PPK') so that you can use it with
       the PuTTY suite. The passphrase will be unchanged by this process
       (unless you deliberately change it). You may want to change the key
       comment before you save the key, since some OpenSSH key formats
       contained no space for a comment, and ssh.com's default comment
       format is long and verbose.

       PuTTYgen can also export private keys in OpenSSH format and in
       ssh.com format. To do so, select one of the `Export' options from
       the `Conversions' menu. Exporting a key works exactly like saving
       it (see section 8.2.10) - you need to have typed your passphrase in
       beforehand, and you will be warned if you are about to save a key
       without a passphrase.

       For OpenSSH there are two options. Modern OpenSSH actually has two
       formats it uses for storing private keys: an older (`PEM-style')
       format, and a newer `native' format with better resistance to
       passphrase guessing and support for comments. `Export OpenSSH key'
       will automatically choose the oldest format supported for the key
       type, for maximum backward compatibility with older versions of
       OpenSSH; for newer key types like Ed25519, it will use the newer
       format as that is the only legal option. If you have some specific
       reason for wanting to use OpenSSH's newer format even for RSA,
       DSA, or ECDSA keys - for instance, you know your file will only
       be used by OpenSSH 6.5 or newer (released in 2014), and want the
       extra security - you can choose `Export OpenSSH key (force new file
       format)'.

       Most clients for the older SSH-1 protocol use a standard format for
       storing private keys on disk. PuTTY uses this format as well; so if
       you have generated an SSH-1 private key using OpenSSH or ssh.com's
       client, you can use it with PuTTY, and vice versa. Hence, the export
       options are not available if you have generated an SSH-1 key.

8.2.16 PuTTYgen command-line configuration

       PuTTYgen supports a set of command-line options to configure many
       of the same settings you can select in the GUI. This allows you to
       start it up with your own preferences ready-selected, which might be
       useful if you generate a lot of keys. (For example, you could make a
       Windows shortcut that runs PuTTYgen with some command line options,
       or a batch file or Powershell script that you could distribute to a
       whole organisation containing your local standards.)

       The options supported on the command line are:

       -t _keytype_

           Type of key to generate. You can select `rsa', `dsa', `ecdsa',
           `eddsa', `ed25519', `ed448', or `rsa1'. See section 8.2.2.

       -b _bits_

           Size of the key to generate, in bits. See section 8.2.3.

       --primes _method_

           Method for generating prime numbers. You can select `probable',
           `proven', and `proven-even'. See section 8.2.4.

       --strong-rsa

           When generating an RSA key, make sure the prime factors of the
           key modulus are `strong primes'. See section 8.2.4.

       --ppk-param _key_=_value_,...

           Allows setting all the same details of the PPK save file format
           described in section 8.2.13.

           Aspects to change are specified as a series of _key_=_value_
           pairs separated by commas. The _key_s are:

           version

               The PPK format version: either 3 or 2.

           kdf

               The variant of Argon2 to use: argon2id, argon2i, and
               argon2d.

           memory

               The amount of memory needed to decrypt the key, in Kbyte.

           time

               Specifies how much time is required to attempt decrypting
               the key, in milliseconds.

           passes

               Alternative to time: specifies the number of hash passes
               required to attempt decrypting the key.

           parallelism

               Number of parallelisable threads that can be used to decrypt
               the key.

       -E _fptype_

           Algorithm to use when displaying key fingerprints. You can
           select `sha256' or `md5'. See section 8.2.6.

   8.3 Getting ready for public key authentication

       Connect to your SSH server using PuTTY with the SSH protocol. When
       the connection succeeds you will be prompted for your user name and
       password to login. Once logged in, you must configure the server to
       accept your public key for authentication:

        -  If your server is OpenSSH, you should change into the `.ssh'
           directory under your home directory, and open the file
           `authorized_keys' with your favourite editor. (You may have
           to create this file, if this is the first key you have put in
           it.) Then switch to the PuTTYgen window, select all of the text
           in the `Public key for pasting into OpenSSH authorized_keys
           file' box (see section 8.2.12), and copy it to the clipboard
           (`Ctrl+C'). Then, switch back to the PuTTY window and insert the
           data into the open file, making sure it ends up all on one line.
           Save the file.

           (In very old versions of OpenSSH, SSH-2 keys had to be put
           in a separate file called `authorized_keys2'. In all current
           versions, the same `authorized_keys' file is used for both SSH-1
           and SSH-2 keys.)

        -  If your server is ssh.com's product and is using SSH-2, you need
           to save a _public_ key file from PuTTYgen (see section 8.2.11),
           and copy that into the `.ssh2' directory on the server. Then you
           should go into that `.ssh2' directory, and edit (or create) a
           file called `authorization'. In this file you should put a line
           like `Key mykey.pub', with `mykey.pub' replaced by the name of
           your key file.

        -  For other SSH server software, you should refer to the manual
           for that server.

       You may also need to ensure that your home directory, your `.ssh'
       directory, and any other files involved (such as `authorized_keys',
       `authorized_keys2' or `authorization') are not group-writable or
       world-writable; servers will typically ignore the keys unless this
       is done. You can typically do this by using a command such as

         chmod go-w $HOME $HOME/.ssh $HOME/.ssh/authorized_keys

       Your server should now be configured to accept authentication using
       your private key. Now you need to configure PuTTY to _attempt_
       authentication using your private key. You can do this in any of
       three ways:

        -  Select the private key in PuTTY's configuration. See section
           4.22.1 for details.

        -  Specify the key file on the command line with the `-i' option.
           See section 3.11.3.18 for details.

        -  Load the private key into Pageant (see chapter 9). In this case
           PuTTY will automatically try to use it for authentication if it
           can.

Chapter 9: Using Pageant for authentication
-------------------------------------------

       Pageant is an SSH authentication agent. It holds your private keys
       in memory, already decoded, so that you can use them often without
       needing to type a passphrase.

   9.1 Getting started with Pageant

       Before you run Pageant, you need to have a private key in `*.PPK'
       format. See chapter 8 to find out how to generate and use one.

       When you run Pageant, it will put an icon of a computer wearing a
       hat into the System tray. It will then sit and do nothing, until
       you load a private key into it. (You may need to use Windows' `Show
       hidden icons' arrow to see the Pageant icon.)

       If you click the Pageant icon with the right mouse button, you will
       see a menu. Select `View Keys' from this menu. The Pageant main
       window will appear. (You can also bring this window up by double-
       clicking on the Pageant icon.)

       The Pageant window contains a list box. This shows the private keys
       Pageant is holding. When you start Pageant, it has no keys, so the
       list box will be empty. After you add one or more keys, they will
       show up in the list box.

       To add a key to Pageant, press the `Add Key' button. Pageant will
       bring up a file dialog, labelled `Select Private Key File'. Find
       your private key file in this dialog, and press `Open'.

       Pageant will now load the private key. If the key is protected by
       a passphrase, Pageant will ask you to type the passphrase. When
       the key has been loaded, it will appear in the list in the Pageant
       window.

       Now start PuTTY and open an SSH session to a site that accepts your
       key. PuTTY will notice that Pageant is running, retrieve the key
       automatically from Pageant, and use it to authenticate. You can now
       open as many PuTTY sessions as you like without having to type your
       passphrase again.

       (PuTTY can be configured not to try to use Pageant, but it will
       try by default. See section 4.21.4 and section 3.11.3.9 for more
       information.)

       When you want to shut down Pageant, click the right button on the
       Pageant icon in the System tray, and select `Exit' from the menu.
       Closing the Pageant main window does _not_ shut down Pageant.

       If you want Pageant to stay running but forget all the keys it has
       acquired, select `Remove All Keys' from the System tray menu.

   9.2 The Pageant main window

       The Pageant main window appears when you left-click on the Pageant
       system tray icon, or alternatively right-click and select `View
       Keys' from the menu. You can use it to keep track of what keys are
       currently loaded into Pageant, and to add new ones or remove the
       existing keys.

 9.2.1 The key list box

       The large list box in the Pageant main window lists the private
       keys that are currently loaded into Pageant. The list might look
       something like this:

         Ed25519    SHA256:TddlQk20DVs4LRcAsIfDN9pInKpY06D+h4kSHwWAj4w
         RSA  2048  SHA256:8DFtyHm3kQihgy52nzX96qMcEVOq7/yJmmwQQhBWYFg

       For each key, the list box will tell you:

        -  The type of the key. Currently, this can be `RSA' (an RSA key
           for use with the SSH-2 protocol), `DSA' (a DSA key for use with
           the SSH-2 protocol), `NIST' (an ECDSA key for use with the
           SSH-2 protocol), `Ed25519' (an Ed25519 key for use with the
           SSH-2 protocol), `Ed448' (an Ed448 key for use with the SSH-
           2 protocol), or `SSH-1' (an RSA key for use with the old SSH-
           1 protocol). (If the key has an associated certificate, this is
           shown here with a `cert' suffix.)

        -  The size (in bits) of the key, for key types that come in
           different sizes. (For ECDSA `NIST' keys, this is indicated as
           `p256' or `p384' or `p521'.)

        -  The fingerprint for the public key. This should be the same
           fingerprint given by PuTTYgen, and (hopefully) also the same
           fingerprint shown by remote utilities such as `ssh-keygen' when
           applied to your `authorized_keys' file.

           For SSH-2 keys, by default this is shown in the `SHA256' format.
           You can change to the older `MD5' format (which looks like
           `aa:bb:cc:...') with the `Fingerprint type' drop-down, but bear
           in mind that this format is less secure and should be avoided
           for comparison purposes where possible.

           If some of the keys loaded into Pageant have certificates
           attached, then Pageant will default to showing the fingerprint
           of the underlying key. This way, a certified and uncertified
           version of the same key will have the same fingerprint, so you
           can see that they match. You can instead use the `Fingerprint
           type' drop-down to ask for a different fingerprint to be shown
           for certified keys, which includes the certificate as part of
           the fingerprinted data. That way you can tell two certificates
           apart.

        -  The comment attached to the key.

        -  The state of deferred decryption, if enabled for this key. See
           section 9.5.

 9.2.2 The `Add Key' button

       To add a key to Pageant by reading it out of a local disk file,
       press the `Add Key' button in the Pageant main window, or
       alternatively right-click on the Pageant icon in the system tray and
       select `Add Key' from there.

       Pageant will bring up a file dialog, labelled `Select Private Key
       File'. Find your private key file in this dialog, and press `Open'.
       If you want to add more than one key at once, you can select
       multiple files using Shift-click (to select several adjacent files)
       or Ctrl-click (to select non-adjacent files).

       Pageant will now load the private key(s). If a key is protected by a
       passphrase, Pageant will ask you to type the passphrase.

       (This is not the only way to add a private key to Pageant. You can
       also add one from a remote system by using agent forwarding; see
       section 9.4 for details.)

 9.2.3 The `Remove Key' button

       If you need to remove a key from Pageant, select that key in the
       list box, and press the `Remove Key' button. Pageant will remove the
       key from its memory.

       You can apply this to keys you added using the `Add Key' button, or
       to keys you added remotely using agent forwarding (see section 9.4);
       it makes no difference.

   9.3 The Pageant command line

       Pageant can be made to do things automatically when it starts up,
       by specifying instructions on its command line. If you're starting
       Pageant from the Windows GUI, you can arrange this by editing the
       properties of the Windows shortcut that it was started from.

       If Pageant is already running, invoking it again with the options
       below causes actions to be performed with the existing instance, not
       a new one.

 9.3.1 Making Pageant automatically load keys on startup

       Pageant can automatically load one or more private keys when it
       starts up, if you provide them on the Pageant command line. Your
       command line might then look like:

         C:\PuTTY\pageant.exe d:\main.ppk d:\secondary.ppk

       If the keys are stored encrypted, Pageant will request the
       passphrases on startup.

       If Pageant is already running, this syntax loads keys into the
       existing Pageant.

       You can specify the `--encrypted' option to defer decryption of
       these keys; see section 9.5.

 9.3.2 Making Pageant run another program

       You can arrange for Pageant to start another program once it has
       initialised itself and loaded any keys specified on its command
       line. This program (perhaps a PuTTY, or a WinCVS making use of
       Plink, or whatever) will then be able to use the keys Pageant has
       loaded.

       You do this by specifying the `-c' option followed by the command,
       like this:

         C:\PuTTY\pageant.exe d:\main.ppk -c C:\PuTTY\putty.exe

 9.3.3 Integrating with Windows OpenSSH

       Windows's own port of OpenSSH uses the same mechanism as Pageant to
       talk to its SSH agent (Windows named pipes). This means that Windows
       OpenSSH can talk directly to Pageant, if it knows where to find
       Pageant's named pipe.

       When Pageant starts up, it can optionally write out a file
       containing an OpenSSH configuration directive that tells the Windows
       `ssh.exe' where to find Pageant. If you include this file from your
       Windows SSH configuration, then `ssh.exe' should automatically use
       Pageant as its agent, so that you can keep your keys in one place
       and have both SSH clients able to use them.

       The option is `--openssh-config', and you follow it with a filename.

       To refer to this file from your main OpenSSH configuration, you can
       use the `Include' directive. For example, you might run Pageant like
       this (with your own username substituted, of course):

         pageant --openssh-config C:\Users\Simon\.ssh\pageant.conf

       and then add a directive like this to your main `.ssh\config'
       file (assuming that lives in the same directory that you just put
       pageant.conf):

         Include pageant.conf

       *Note*: this technique only works with _Windows's_ port of OpenSSH,
       which lives at C:\Windows\System32\OpenSSH\ssh.exe if you have
       it installed. (If not, it can be installed as a Windows optional
       feature, e.g., via Settings > Apps & features > Optional features >
       Add a feature > OpenSSH Client.)

       There are other versions of OpenSSH for Windows, notably the one
       that comes with Windows git. Those will likely not work with the
       same configuration, because they tend to depend on Unix emulation
       layers like MinGW or MSys, so they won't speak Windows native
       pathname syntax or understand named pipes. The above instructions
       will only work with Windows's own version of OpenSSH.

       So, if you want to use Windows git with an SSH key held in
       Pageant, you'll have to set the environment variable GIT_SSH,
       to point at a different program. You could point it at
       c:\Windows\System32\OpenSSH\ssh.exe once you've done this setup -
       but it's just as easy to point it at Plink!

 9.3.4 Unix-domain sockets: integrating with WSL 1

       Pageant can listen on the WinSock implementation of `Unix-domain
       sockets'. These interoperate with the Unix-domain sockets found in
       the original Windows Subsystem for Linux (now known as WSL 1). So if
       you ask Pageant to listen on one of these, then your WSL 1 processes
       can talk directly to Pageant.

       To configure this, run Pageant with the option `--unix', followed
       with a pathname. Then, in WSL 1, set the environment variable
       SSH_AUTH_SOCK to point at the WSL translation of that pathname.

       For example, you might run

         pageant --unix C:\Users\Simon\.ssh\agent.sock

       and in WSL 1, set the environment variable

         SSH_AUTH_SOCK=/mnt/c/Users/Simon/.ssh/agent.sock

       Alternatively, you can add a line to your .ssh/config file inside
       WSL that says

         IdentityAgent /mnt/c/Users/Simon/.ssh/agent.sock

       although doing it like that may mean that ssh-add commands won't
       find the agent, even though ssh itself will.

       *Security note*: Unix-domain sockets are protected against access by
       other users by the file protections on their containing directory.
       So if your Windows machine is multiuser, make sure you create the
       socket inside a directory that other users can't access at all. (In
       fact, that's a good idea on general principles.)

       *Compatibility note*: WSL 2 processes cannot talk to Pageant by this
       mechanism, because WSL 2's Unix-domain sockets are managed by a
       separate Linux kernel, and not by the same kernel that WinSock talks
       to.

 9.3.5 Starting with the key list visible

       Start Pageant with the `--keylist' option to show the main window as
       soon as it starts up.

 9.3.6 Restricting the Windows process ACL

       Pageant supports the same `-restrict-acl' option as the other PuTTY
       utilities to lock down the Pageant process's access control; see
       section 3.11.3.28 for why you might want to do this.

       By default, if Pageant is started with `-restrict-acl', it won't
       pass this to any PuTTY sessions started from its System Tray
       submenu. Use `-restrict-putty-acl' to change this. (Again, see
       section 3.11.3.28 for details.)

   9.4 Using agent forwarding

       Agent forwarding is a mechanism that allows applications on your SSH
       server machine to talk to the agent on your client machine.

       Note that at present, whether agent forwarding in SSH-2 is available
       depends on your server. Pageant's protocol is compatible with the
       OpenSSH server, but the ssh.com server uses a different agent
       protocol, which PuTTY does not yet support.

       To enable agent forwarding, first start Pageant. Then set up a
       PuTTY SSH session in which `Allow agent forwarding' is enabled (see
       section 4.21.7). Open the session as normal. (Alternatively, you
       can use the `-A' command line option; see section 3.11.3.10 for
       details.)

       If this has worked, your applications on the server should now have
       access to a Unix domain socket which the SSH server will forward
       back to PuTTY, and PuTTY will forward on to the agent. To check that
       this has actually happened, you can try this command on Unix server
       machines:

         unixbox:~$ echo $SSH_AUTH_SOCK
         /tmp/ssh-XXNP18Jz/agent.28794
         unixbox:~$

       If the result line comes up blank, agent forwarding has not been
       enabled at all.

       Now if you run `ssh' on the server and use it to connect through to
       another server that accepts one of the keys in Pageant, you should
       be able to log in without a password:

         unixbox:~$ ssh -v otherunixbox
         [...]
         debug: next auth method to try is publickey
         debug: userauth_pubkey_agent: trying agent key my-putty-key
         debug: ssh-userauth2 successful: method publickey
         [...]

       If you enable agent forwarding on _that_ SSH connection as well (see
       the manual for your server-side SSH client to find out how to do
       this), your authentication keys will still be available on the next
       machine you connect to - two SSH connections away from where they're
       actually stored.

       In addition, if you have a private key on one of the SSH servers,
       you can send it all the way back to Pageant using the local `ssh-
       add' command:

         unixbox:~$ ssh-add ~/.ssh/id_rsa
         Need passphrase for /home/fred/.ssh/id_rsa
         Enter passphrase for /home/fred/.ssh/id_rsa:
         Identity added: /home/fred/.ssh/id_rsa (/home/simon/.ssh/id_rsa)
         unixbox:~$

       and then it's available to every machine that has agent forwarding
       available (not just the ones downstream of the place you added it).

   9.5 Loading keys without decrypting them

       You can add keys to Pageant _without_ decrypting them. The key file
       will be held in Pageant's memory still encrypted, and when a client
       program first tries to use the key, Pageant will display a dialog
       box prompting for the passphrase so that the key can be decrypted.

       This works the same way whether the key is used by an instance of
       PuTTY running locally, or a remote client connecting to Pageant
       through agent forwarding.

       To add a key to Pageant in this encrypted form, press the `Add Key
       (encrypted)' button in the Pageant main window, or alternatively
       right-click on the Pageant icon in the system tray and select `Add
       Key (encrypted)' from there. Pageant will bring up a file dialog, in
       just the same way as it would for the plain `Add Key' button. But it
       won't ask for a passphrase. Instead, the key will be listed in the
       main window with `(encrypted)' after it.

       To start Pageant up in the first place with encrypted keys loaded
       into it, you can use the `--encrypted' option on the command line.
       For example:

         C:\PuTTY\pageant.exe --encrypted d:\main.ppk

       After a key has been decrypted for the first use, it remains
       decrypted, so that it can be used again. The main window will list
       the key with `(re-encryptable)' after it. You can revert it to the
       previous state, where a passphrase is required, using the `Re-
       encrypt' button in the Pageant main window.

       You can also `re-encrypt' all keys that were added encrypted by
       choosing `Re-encrypt All Keys' from the System tray menu. (Note that
       this does _not_ discard cleartext keys that were not previously
       added encrypted!)

       *CAUTION*: When Pageant displays a prompt to decrypt an already-
       loaded key, it cannot give keyboard focus to the prompt dialog box.
       As far as I know this is a deliberate defensive measure by Windows,
       against malicious software. So make sure you click in the prompt
       window before typing your passphrase, or else the passphrase might
       be sent to somewhere you didn't want to trust with it!

   9.6 Security considerations

       Using Pageant for public-key authentication gives you the
       convenience of being able to open multiple SSH sessions without
       having to type a passphrase every time, but also gives you the
       security benefit of never storing a decrypted private key on disk.
       Many people feel this is a good compromise between security and
       convenience.

       It _is_ a compromise, however. Holding your decrypted private keys
       in Pageant is better than storing them in easy-to-find disk files,
       but still less secure than not storing them anywhere at all. This is
       for two reasons:

        -  Windows unfortunately provides no way to protect pieces of
           memory from being written to the system swap file. So if Pageant
           is holding your private keys for a long period of time, it's
           possible that decrypted private key data may be written to the
           system swap file, and an attacker who gained access to your hard
           disk later on might be able to recover that data. (However,
           if you stored an unencrypted key in a disk file they would
           _certainly_ be able to recover it.)

        -  Although, like most modern operating systems, Windows prevents
           programs from accidentally accessing one another's memory space,
           it does allow programs to access one another's memory space
           deliberately, for special purposes such as debugging. This means
           that if you allow a virus, trojan, or other malicious program
           on to your Windows system while Pageant is running, it could
           access the memory of the Pageant process, extract your decrypted
           authentication keys, and send them back to its master.

       Similarly, use of agent _forwarding_ is a security improvement on
       other methods of one-touch authentication, but not perfect. Holding
       your keys in Pageant on your Windows box has a security advantage
       over holding them on the remote server machine itself (either in an
       agent or just unencrypted on disk), because if the server machine
       ever sees your unencrypted private key then the sysadmin or anyone
       who cracks the machine can steal the keys and pretend to be you for
       as long as they want.

       However, the sysadmin of the server machine can always pretend to
       be you _on that machine_. So if you forward your agent to a server
       machine, then the sysadmin of that machine can access the forwarded
       agent connection and request signatures from any of your private
       keys, and can therefore log in to other machines as you. They
       can only do this to a limited extent - when the agent forwarding
       disappears they lose the ability - but using Pageant doesn't
       actually _prevent_ the sysadmin (or hackers) on the server from
       doing this.

       Therefore, if you don't trust the sysadmin of a server machine, you
       should _never_ use agent forwarding to that machine. (Of course you
       also shouldn't store private keys on that machine, type passphrases
       into it, or log into other machines from it in any way at all;
       Pageant is hardly unique in this respect.)

Chapter 10: Common error messages
---------------------------------

       This chapter lists a number of common error messages which PuTTY and
       its associated tools can produce, and explains what they mean in
       more detail.

       We do not attempt to list _all_ error messages here: there are many
       which should never occur, and some which should be self-explanatory.
       If you get an error message which is not listed in this chapter and
       which you don't understand, report it to us as a bug (see appendix
       B) and we will add documentation for it.

  10.1 `The host key is not cached for this server'

       This error message occurs when PuTTY connects to a new SSH server.
       Every server identifies itself by means of a host key; once PuTTY
       knows the host key for a server, it will be able to detect if a
       malicious attacker redirects your connection to another machine.

       If you see this message, it means that PuTTY has not seen this host
       key before, and has no way of knowing whether it is correct or not.
       You should attempt to verify the host key by other means, such as
       asking the machine's administrator.

       If you see this message and you know that your installation of PuTTY
       _has_ connected to the same server before, it may have been recently
       upgraded to SSH protocol version 2. SSH protocols 1 and 2 use
       separate host keys, so when you first use SSH-2 with a server you
       have only used SSH-1 with before, you will see this message again.
       You should verify the correctness of the key as before.

       See section 2.2 for more information on host keys.

  10.2 `WARNING - POTENTIAL SECURITY BREACH!'

       This message, followed by `The server's host key does not match
       the one PuTTY has cached for this server', means that PuTTY has
       connected to the SSH server before, knows what its host key _should_
       be, but has found a different one.

       (If the message instead talks about a `certified host key', see
       instead section 10.3.)

       This may mean that a malicious attacker has replaced your server
       with a different one, or has redirected your network connection
       to their own machine. On the other hand, it may simply mean that
       the administrator of your server has accidentally changed the key
       while upgrading the SSH software; this _shouldn't_ happen but it is
       unfortunately possible.

       You should contact your server's administrator and see whether they
       expect the host key to have changed. If so, verify the new host key
       in the same way as you would if it was new.

       See section 2.2 for more information on host keys.

  10.3 `This server presented a certified host key which was signed by a
       different certification authority ...'

       If you've configured PuTTY to trust at least one certification
       authority for signing host keys (see section 4.19.4), then it will
       ask the SSH server to send it any available certified host keys.
       If the server sends back a certified key signed by a _different_
       certification authority, PuTTY will present this variant of the host
       key prompt, preceded by `WARNING - POTENTIAL SECURITY BREACH!'

       One reason why this can happen is a deliberate attack. Just like an
       ordinary man-in-the-middle attack which substitutes a wrong host
       key, a particularly ambitious attacker might substitute an entire
       wrong certification authority, and hope that you connect anyway.

       But it's also possible in some situations that this error might
       arise legitimately. For example, if your organisation's IT
       department has just rolled out a new CA key which you haven't yet
       entered in PuTTY's configuration, or if your CA configuration
       involves two overlapping domains, or something similar.

       So, unfortunately, you'll have to work out what to do about it
       yourself: make an exception for this specific case, or abandon this
       connection and install a new CA key before trying again (if you're
       really sure you trust the CA), or edit your configuration in some
       other way, or just stop trying to use this server.

       If you're convinced that this particular server is legitimate even
       though the CA is not one you trust, PuTTY will let you cache the
       certified host key, treating it in the same way as an uncertified
       one. Then that particular certificate will be accepted for future
       connections to this specific server, even though other certificates
       signed by the same CA will still be rejected.

  10.4 `SSH protocol version 2 required by our configuration but remote
       only provides (old, insecure) SSH-1'

       By default, PuTTY only supports connecting to SSH servers that
       implement SSH protocol version 2. If you see this message, the
       server you're trying to connect to only supports the older SSH-1
       protocol.

       If the server genuinely only supports SSH-1, then you need to either
       change the `SSH protocol version' setting (see section 4.17.4), or
       use the `-1' command-line option; in any case, you should not treat
       the resulting connection as secure.

       You might start seeing this message with new versions of PuTTY
       (from 0.68 onwards) where you didn't before, because it used to be
       possible to configure PuTTY to automatically fall back from SSH-2 to
       SSH-1. This is no longer supported, to prevent the possibility of a
       downgrade attack.

  10.5 `The first cipher supported by the server is ... below the
       configured warning threshold'

       This occurs when the SSH server does not offer any ciphers which you
       have configured PuTTY to consider strong enough. By default, PuTTY
       puts up this warning only for Blowfish, single-DES, and Arcfour
       encryption.

       See section 4.20 for more information on this message.

       (There are similar messages for other cryptographic primitives, such
       as host key algorithms.)

  10.6 `Remote side sent disconnect message type 2 (protocol error): "Too
       many authentication failures for root"'

       This message is produced by an OpenSSH (or Sun SSH) server if it
       receives more failed authentication attempts than it is willing to
       tolerate.

       This can easily happen if you are using Pageant and have a large
       number of keys loaded into it, since these servers count each offer
       of a public key as an authentication attempt. This can be worked
       around by specifying the key that's required for the authentication
       in the PuTTY configuration (see section 4.22.1); PuTTY will ignore
       any other keys Pageant may have, but will ask Pageant to do the
       authentication, so that you don't have to type your passphrase.

       On the server, this can be worked around by disabling public-key
       authentication or (for Sun SSH only) by increasing `MaxAuthTries' in
       `sshd_config'.

  10.7 `Out of memory'

       This occurs when PuTTY tries to allocate more memory than the system
       can give it. This _may_ happen for genuine reasons: if the computer
       really has run out of memory, or if you have configured an extremely
       large number of lines of scrollback in your terminal. PuTTY is
       not able to recover from running out of memory; it will terminate
       immediately after giving this error.

       However, this error can also occur when memory is not running out at
       all, because PuTTY receives data in the wrong format. In SSH-2 and
       also in SFTP, the server sends the length of each message before the
       message itself; so PuTTY will receive the length, try to allocate
       space for the message, and then receive the rest of the message.
       If the length PuTTY receives is garbage, it will try to allocate
       a ridiculous amount of memory, and will terminate with an `Out of
       memory' error.

       This can happen in SSH-2, if PuTTY and the server have not enabled
       encryption in the same way (see question A.7.3 in the FAQ).

       This can also happen in PSCP or PSFTP, if your login scripts on the
       server generate output: the client program will be expecting an
       SFTP message starting with a length, and if it receives some text
       from your login scripts instead it will try to interpret them as a
       message length. See question A.7.4 for details of this.

  10.8 `Internal error', `Internal fault', `Assertion failed'

       Any error beginning with the word `Internal' should _never_ occur.
       If it does, there is a bug in PuTTY by definition; please see
       appendix B and report it to us.

       Similarly, any error message starting with `Assertion failed' is a
       bug in PuTTY. Please report it to us, and include the exact text
       from the error message box.

  10.9 `Unable to use key file', `Couldn't load private key', `Couldn't
       load this key'

       Various forms of this error are printed in the PuTTY window, or
       written to the PuTTY Event Log (see section 3.1.3.1) when trying
       public-key authentication, or given by Pageant when trying to load a
       private key.

       If you see one of these messages, it often indicates that you've
       tried to load a key of an inappropriate type into PuTTY, Plink,
       PSCP, PSFTP, or Pageant.

       You may have tried to load an SSH-2 key in a `foreign' format
       (OpenSSH or ssh.com) directly into one of the PuTTY tools, in which
       case you need to import it into PuTTY's native format (`*.PPK')
       using PuTTYgen - see section 8.2.15.

       Alternatively, you may have specified a key that's inappropriate for
       the connection you're making. The SSH-2 and the old SSH-1 protocols
       require different private key formats, and a SSH-1 key can't be used
       for a SSH-2 connection (or vice versa).

 10.10 `Server refused our key', `Server refused our public key', `Key
       refused'

       Various forms of this error are printed in the PuTTY window, or
       written to the PuTTY Event Log (see section 3.1.3.1) when trying
       public-key authentication.

       If you see one of these messages, it means that PuTTY has sent a
       public key to the server and offered to authenticate with it, and
       the server has refused to accept authentication. This usually means
       that the server is not configured to accept this key to authenticate
       this user.

       This is almost certainly not a problem with PuTTY. If you see
       this type of message, the first thing you should do is check your
       _server_ configuration carefully. Common errors include having the
       wrong permissions or ownership set on the public key or the user's
       home directory on the server. Also, read the PuTTY Event Log; the
       server may have sent diagnostic messages explaining exactly what
       problem it had with your setup.

       Section 8.3 has some hints on server-side public key setup.

 10.11 `Access denied', `Authentication refused'

       Various forms of this error are printed in the PuTTY window,
       or written to the PuTTY Event Log (see section 3.1.3.1) during
       authentication.

       If you see one of these messages, it means that the server has
       refused all the forms of authentication PuTTY has tried and it has
       no further ideas.

       It may be worth checking the Event Log for diagnostic messages from
       the server giving more detail.

       This error can be caused by buggy SSH-1 servers that fail to cope
       with the various strategies we use for camouflaging passwords in
       transit. Upgrade your server, or use the workarounds described in
       section 4.27.14 and possibly section 4.27.15.

 10.12 `No supported authentication methods available'

       This error indicates that PuTTY has run out of ways to authenticate
       you to an SSH server. This may be because PuTTY has TIS or keyboard-
       interactive authentication disabled, in which case see section
       4.21.5 and section 4.21.6.

 10.13 `Incorrect MAC received on packet' or `Incorrect CRC received on
       packet'

       This error occurs when PuTTY decrypts an SSH packet and its checksum
       is not correct. This probably means something has gone wrong in the
       encryption or decryption process. It's difficult to tell from this
       error message whether the problem is in the client, in the server,
       or in between.

       In particular, if the network is corrupting data at the TCP level,
       it may only be obvious with cryptographic protocols such as SSH,
       which explicitly check the integrity of the transferred data and
       complain loudly if the checks fail. Corruption of protocols without
       integrity protection (such as HTTP) will manifest in more subtle
       failures (such as misdisplayed text or images in a web browser)
       which may not be noticed.

       Occasionally this has been caused by server bugs. An example is the
       bug described at section 4.27.11, although you're very unlikely to
       encounter that one these days.

       In this context MAC stands for Message Authentication Code. It's a
       cryptographic term, and it has nothing at all to do with Ethernet
       MAC (Media Access Control) addresses, or with the Apple computer.

 10.14 `Incoming packet was garbled on decryption'

       This error occurs when PuTTY decrypts an SSH packet and the
       decrypted data makes no sense. This probably means something has
       gone wrong in the encryption or decryption process. It's difficult
       to tell from this error message whether the problem is in the
       client, in the server, or in between.

       If you get this error, one thing you could try would be to fiddle
       with the setting of `Miscomputes SSH-2 encryption keys' (see section
       4.27.13) or `Ignores SSH-2 maximum packet size' (see section 4.27.5)
       on the Bugs panel.

 10.15 `PuTTY X11 proxy: _various errors_'

       This family of errors are reported when PuTTY is doing X forwarding.
       They are sent back to the X application running on the SSH server,
       which will usually report the error to the user.

       When PuTTY enables X forwarding (see section 3.4) it creates a
       virtual X display running on the SSH server. This display requires
       authentication to connect to it (this is how PuTTY prevents other
       users on your server machine from connecting through the PuTTY proxy
       to your real X display). PuTTY also sends the server the details it
       needs to enable clients to connect, and the server should put this
       mechanism in place automatically, so your X applications should just
       work.

       A common reason why people see one of these messages is because they
       used SSH to log in as one user (let's say `fred'), and then used
       the Unix `su' command to become another user (typically `root').
       The original user, `fred', has access to the X authentication data
       provided by the SSH server, and can run X applications which are
       forwarded over the SSH connection. However, the second user (`root')
       does not automatically have the authentication data passed on to it,
       so attempting to run an X application as that user often fails with
       this error.

       If this happens, _it is not a problem with PuTTY_. You need to
       arrange for your X authentication data to be passed from the user
       you logged in as to the user you used `su' to become. How you do
       this depends on your particular system; in fact many modern versions
       of `su' do it automatically.

 10.16 `Network error: Software caused connection abort'

       This is a generic error produced by the Windows network code when
       it kills an established connection for some reason. For example, it
       might happen if you pull the network cable out of the back of an
       Ethernet-connected computer, or if Windows has any other similar
       reason to believe the entire network has become unreachable.

       Windows also generates this error if it has given up on the machine
       at the other end of the connection ever responding to it. If the
       network between your client and server goes down and your client
       then tries to send some data, Windows will make several attempts
       to send the data and will then give up and kill the connection. In
       particular, this can occur even if you didn't type anything, if you
       are using SSH-2 and PuTTY attempts a key re-exchange. (See section
       4.18.2 for more about key re-exchange.)

       (It can also occur if you are using keepalives in your connection.
       Other people have reported that keepalives _fix_ this error for
       them. See section 4.14.1 for a discussion of the pros and cons of
       keepalives.)

       We are not aware of any reason why this error might occur that would
       represent a bug in PuTTY. The problem is between you, your Windows
       system, your network and the remote system.

 10.17 `Network error: Connection reset by peer'

       This error occurs when the machines at each end of a network
       connection lose track of the state of the connection between them.
       For example, you might see it if your SSH server crashes, and
       manages to reboot fully before you next attempt to send data to it.

       However, the most common reason to see this message is if you are
       connecting through a firewall or a NAT router which has timed the
       connection out. See question A.7.8 in the FAQ for more details.
       You may be able to improve the situation by using keepalives; see
       section 4.14.1 for details on this.

       Note that Windows can produce this error in some circumstances
       without seeing a connection reset from the server, for instance if
       the connection to the network is lost.

 10.18 `Network error: Connection refused'

       This error means that the network connection PuTTY tried to make to
       your server was rejected by the server. Usually this happens because
       the server does not provide the service which PuTTY is trying to
       access.

       Check that you are connecting with the correct protocol (SSH,
       Telnet, etc), and check that the port number is correct. If that
       fails, consult the administrator of your server.

       This error can also be caused by a firewall in between you and the
       server, which rejects the connection and sends back the same type of
       error packet as the real server would have sent.

 10.19 `Network error: Connection timed out'

       This error means that the network connection PuTTY tried to make to
       your server received no response at all from the server. Usually
       this happens because the server machine is completely isolated from
       the network, or because it is turned off.

       Check that you have correctly entered the host name or IP address
       of your server machine. If that fails, consult the administrator of
       your server.

       Unix also generates this error when it tries to send data down a
       connection and contact with the server has been completely lost
       during a connection. (There is a delay of minutes before Unix gives
       up on receiving a reply from the server.) This can occur if you type
       things into PuTTY while the network is down, but it can also occur
       if PuTTY decides of its own accord to send data: due to a repeat key
       exchange in SSH-2 (see section 4.18.2) or due to keepalives (section
       4.14.1).

 10.20 `Network error: Cannot assign requested address'

       This means that the operating system rejected the parameters of the
       network connection PuTTY tried to make, usually without actually
       trying to connect to anything, because they were simply invalid.

       A common way to provoke this error is to accidentally try to connect
       to port 0, which is not a valid port number.

Appendix A: PuTTY FAQ
---------------------

       This FAQ is published on the PuTTY web site, and also provided as an
       appendix in the manual.

   A.1 Introduction

 A.1.1 What is PuTTY?

       PuTTY is a client program for the SSH, Telnet, Rlogin, and SUPDUP
       network protocols.

       These protocols are all used to run a remote session on a computer,
       over a network. PuTTY implements the client end of that session: the
       end at which the session is displayed, rather than the end at which
       it runs.

       In really simple terms: you run PuTTY on a Windows machine, and
       tell it to connect to (for example) a Unix machine. PuTTY opens a
       window. Then, anything you type into that window is sent straight
       to the Unix machine, and everything the Unix machine sends back is
       displayed in the window. So you can work on the Unix machine as if
       you were sitting at its console, while actually sitting somewhere
       else.

   A.2 Features supported in PuTTY

       In general, if you want to know if PuTTY supports a particular
       feature, you should look for it on the PuTTY web site. In
       particular:

        -  try the changes page, and see if you can find the feature on
           there. If a feature is listed there, it's been implemented. If
           it's listed as a change made _since_ the latest version, it
           should be available in the development snapshots, in which case
           testing will be very welcome.

        -  try the Wishlist page, and see if you can find the feature
           there. If it's on there, and not in the `Recently fixed'
           section, it probably _hasn't_ been implemented.

 A.2.1 Does PuTTY support SSH-2?

       Yes. SSH-2 support has been available in PuTTY since version 0.50 in
       2000.

       Public key authentication (both RSA and DSA) in SSH-2 was new in
       version 0.52 in 2002.

 A.2.2 Does PuTTY support reading OpenSSH or ssh.com SSH-2 private key
       files?

       PuTTY doesn't support this natively (see the wishlist entry for
       reasons why not), but as of 0.53 PuTTYgen can convert both OpenSSH
       and ssh.com private key files into PuTTY's format.

 A.2.3 Does PuTTY support SSH-1?

       Yes. SSH-1 support has always been available in PuTTY.

       However, the SSH-1 protocol has many weaknesses and is no longer
       considered secure; you should use SSH-2 instead if at all possible.

       As of 0.68, PuTTY will no longer fall back to SSH-1 if the server
       doesn't appear to support SSH-2; you must explicitly ask for SSH-1.

 A.2.4 Does PuTTY support local echo?

       Yes. Version 0.52 has proper support for local echo.

       In version 0.51 and before, local echo could not be separated from
       local line editing (where you type a line of text locally, and it
       is not sent to the server until you press Return, so you have the
       chance to edit it and correct mistakes _before_ the server sees it).
       New in version 0.52, local echo and local line editing are separate
       options, and by default PuTTY will try to determine automatically
       whether to enable them or not, based on which protocol you have
       selected and also based on hints from the server. If you have a
       problem with PuTTY's default choice, you can force each option to be
       enabled or disabled as you choose. The controls are in the Terminal
       panel, in the section marked `Line discipline options'.

 A.2.5 Does PuTTY support storing settings, so I don't have to change them
       every time?

       Yes, all of PuTTY's settings can be saved in named session profiles.
       You can also change the default settings that are used for new
       sessions. See section 4.1.2 in the documentation for how to do this.

 A.2.6 Does PuTTY support storing its settings in a disk file?

       Not at present, although section 4.33 in the documentation gives a
       method of achieving the same effect.

 A.2.7 Does PuTTY support full-screen mode, like a DOS box?

       Yes; this was added in version 0.52, in 2002.

 A.2.8 Does PuTTY have the ability to remember my password so I don't have
       to type it every time?

       No, it doesn't.

       Remembering your password is a bad plan for obvious security
       reasons: anyone who gains access to your machine while you're away
       from your desk can find out the remembered password, and use it,
       abuse it or change it.

       In addition, it's not even _possible_ for PuTTY to automatically
       send your password in a Telnet session, because Telnet doesn't
       give the client software any indication of which part of the login
       process is the password prompt. PuTTY would have to guess, by
       looking for words like `password' in the session data; and if your
       login program is written in something other than English, this won't
       work.

       In SSH, remembering your password would be possible in theory,
       but there doesn't seem to be much point since SSH supports public
       key authentication, which is more flexible and more secure. See
       chapter 8 in the documentation for a full discussion of public key
       authentication.

 A.2.9 Is there an option to turn off the annoying host key prompts?

       No, there isn't. And there won't be. Even if you write it yourself
       and send us the patch, we won't accept it.

       Those annoying host key prompts are the _whole point_ of SSH.
       Without them, all the cryptographic technology SSH uses to secure
       your session is doing nothing more than making an attacker's job
       slightly harder; instead of sitting between you and the server with
       a packet sniffer, the attacker must actually subvert a router and
       start modifying the packets going back and forth. But that's not all
       that much harder than just sniffing; and without host key checking,
       it will go completely undetected by client or server.

       Host key checking is your guarantee that the encryption you put
       on your data at the client end is the _same_ encryption taken off
       the data at the server end; it's your guarantee that it hasn't
       been removed and replaced somewhere on the way. Host key checking
       makes the attacker's job _astronomically_ hard, compared to packet
       sniffing, and even compared to subverting a router. Instead of
       applying a little intelligence and keeping an eye on oss-security,
       the attacker must now perform a brute-force attack against at least
       one military-strength cipher. That insignificant host key prompt
       really does make _that_ much difference.

       If you're having a specific problem with host key checking - perhaps
       you want an automated batch job to make use of PSCP or Plink, and
       the interactive host key prompt is hanging the batch process -
       then the right way to fix it is to add the correct host key to the
       Registry in advance, or if the Registry is not available, to use the
       -hostkey command-line option. That way, you retain the _important_
       feature of host key checking: the right key will be accepted and the
       wrong ones will not. Adding an option to turn host key checking off
       completely is the wrong solution and we will not do it.

       If you have host keys available in the common `known_hosts' format,
       we have a script called `kh2reg.py' to convert them to a Windows
       .REG file, which can be installed ahead of time by double-clicking
       or using `REGEDIT'.

A.2.10 Will you write an SSH server for the PuTTY suite, to go with the
       client?

       Not one that you'd want to use.

       While much of the protocol and networking code can be made common
       between a client and server, to make a _useful_ general-purpose
       server requires all sorts of fiddly new code like interacting with
       OS authentication databases and the like.

       A special-purpose SSH server (called Uppity) can now be built from
       the PuTTY source code, and indeed it is not usable as a general-
       purpose server; it exists mainly as a test harness.

       If someone else wants to use this as a basis for writing a general-
       purpose SSH server, they'd be perfectly welcome to of course; but we
       don't have time, and we don't have motivation. The code is available
       if anyone else wants to try it.

A.2.11 Can PSCP or PSFTP transfer files in ASCII mode?

       Unfortunately not.

       This was a limitation of the file transfer protocols as originally
       specified: the SCP and SFTP protocols had no notion of transferring
       a file in anything other than binary mode. (This is still true of
       SCP.)

       The current draft protocol spec of SFTP proposes a means of
       implementing ASCII transfer. At some point PSCP/PSFTP may implement
       this proposal.

   A.3 Ports to other operating systems

       The eventual goal is for PuTTY to be a multi-platform program, able
       to run on at least Windows, Mac OS and Unix.

       PuTTY has been gaining a generalised porting layer, drawing a clear
       line between platform-dependent and platform-independent code. The
       general intention was for this porting layer to evolve naturally as
       part of the process of doing the first port; a Unix port has now
       been released and the plan seems to be working so far.

 A.3.1 What ports of PuTTY exist?

       Currently, release versions of PuTTY tools only run on Windows
       systems and Unix.

       As of 0.68, the supplied PuTTY executables run on versions of
       Windows from XP onwards, up to and including Windows 11; and
       we know of no reason why PuTTY should not continue to work on
       future versions of Windows. We provide 32-bit and 64-bit Windows
       executables for the common x86 processor family; see question A.6.10
       for discussion of the compatibility issues around that. The 32-bit
       executables require a Pentium 4 or newer processor. We also provide
       executables for Windows on Arm processors.

       (We used to also provide executables for Windows for the Alpha
       processor, but stopped after 0.58 due to lack of interest.)

       In the development code, a partial port to Mac OS exists (see
       question A.3.6).

       Currently PuTTY does _not_ run on Windows CE (see question A.3.4).

       We do not have release-quality ports for any other systems at the
       present time. If anyone told you we had an Android port, or an iOS
       port, or any other port of PuTTY, they were mistaken. We don't.

       There are some third-party ports to various platforms, mentioned on
       the Links page of our website.

 A.3.2 Is there a port to Unix?

       There are Unix ports of most of the traditional PuTTY tools, and
       also one entirely new application.

       If you look at the source release, you should find a `unix'
       subdirectory. You need `cmake' to build it; see the file `README' in
       the source distribution. This should build you:

        -  Unix ports of PuTTY, Plink, PSCP, and PSFTP, which work pretty
           much the same as their Windows counterparts;

        -  Command-line versions of PuTTYgen and Pageant, whose user
           interface is quite different to the Windows GUI versions;

        -  `pterm' - an xterm-type program which supports the same terminal
           emulation as PuTTY.

       If you don't have Gtk, you should still be able to build the
       command-line tools.

 A.3.3 What's the point of the Unix port? Unix has OpenSSH.

       All sorts of little things. `pterm' is directly useful to anyone who
       prefers PuTTY's terminal emulation to `xterm''s, which at least some
       people do. Unix Plink has apparently found a niche among people who
       find the complexity of OpenSSL makes OpenSSH hard to install (and
       who don't mind Plink not having as many features). Some users want
       to generate a large number of SSH keys on Unix and then copy them
       all into PuTTY, and the Unix PuTTYgen should allow them to automate
       that conversion process.

       There were development advantages as well; porting PuTTY to Unix
       was a valuable path-finding effort for other future ports, and also
       allowed us to use the excellent Linux tool Valgrind to help with
       debugging, which has already improved PuTTY's stability on _all_
       platforms.

       However, if you're a Unix user and you can see no reason to switch
       from OpenSSH to PuTTY/Plink, then you're probably right. We don't
       expect our Unix port to be the right thing for everybody.

 A.3.4 Will there be a port to Windows CE or PocketPC?

       We once did some work on such a port, but it only reached an early
       stage, and certainly not a useful one. It's no longer being actively
       worked on.

 A.3.5 Is there a port to Windows 3.1?

       PuTTY is a 32-bit application from the ground up, so it won't run on
       Windows 3.1 as a native 16-bit program; and it would be _very_ hard
       to port it to do so, because of Windows 3.1's vile memory allocation
       mechanisms.

       However, it is possible in theory to compile the existing PuTTY
       source in such a way that it will run under Win32s (an extension to
       Windows 3.1 to let you run 32-bit programs). In order to do this
       you'll need the right kind of C compiler - modern versions of Visual
       C at least have stopped being backwards compatible to Win32s. Also,
       the last time we tried this it didn't work very well.

 A.3.6 Will there be a port to the Mac?

       We hope so!

       We attempted one around 2005, written as a native Cocoa application,
       but it turned out to be very slow to redraw its window for some
       reason we never got to the bottom of.

       In 2015, after porting the GTK front end to work with GTK 3, we
       began another attempt based on making small changes to the GTK
       code and building it against the OS X Quartz version of GTK 3.
       This doesn't seem to have the window redrawing problem any more,
       so it's already got further than the last effort, but it is still
       substantially unfinished.

       If any OS X and/or GTK programming experts are keen to have a
       finished version of this, we urge them to help out with some of
       the remaining problems! See the TODO list in `unix/main-gtk-
       application.c' in the source code.

 A.3.7 Will there be a port to EPOC?

       I hope so, but given that ports aren't really progressing very fast
       even on systems the developers _do_ already know how to program for,
       it might be a long time before any of us get round to learning a new
       system and doing the port for that.

       However, some of the work has been done by other people; see the
       Links page of our website for various third-party ports.

 A.3.8 Will there be a port to the iPhone?

       We have no plans to write such a port ourselves; none of us has an
       iPhone, and developing and publishing applications for it looks
       awkward and expensive.

       However, there is a third-party SSH client for the iPhone and
       iPod Touch called pTerm, which is apparently based on PuTTY. (This
       is nothing to do with our similarly-named `pterm', which is a
       standalone terminal emulator for Unix systems; see question A.3.2.)

   A.4 Embedding PuTTY in other programs

 A.4.1 Is the SSH or Telnet code available as a DLL?

       No, it isn't. It would take a reasonable amount of rewriting for
       this to be possible, and since the PuTTY project itself doesn't
       believe in DLLs (they make installation more error-prone) none of us
       has taken the time to do it.

       Most of the code cleanup work would be a good thing to happen in
       general, so if anyone feels like helping, we wouldn't say no.

       See also the wishlist entry.

 A.4.2 Is the SSH or Telnet code available as a Visual Basic component?

       No, it isn't. None of the PuTTY team uses Visual Basic, and none of
       us has any particular need to make SSH connections from a Visual
       Basic application. In addition, all the preliminary work to turn it
       into a DLL would be necessary first; and furthermore, we don't even
       know how to write VB components.

       If someone offers to do some of this work for us, we might consider
       it, but unless that happens I can't see VB integration being
       anywhere other than the very bottom of our priority list.

 A.4.3 How can I use PuTTY to make an SSH connection from within another
       program?

       Probably your best bet is to use Plink, the command-line connection
       tool. If you can start Plink as a second Windows process, and
       arrange for your primary process to be able to send data to the
       Plink process, and receive data from it, through pipes, then you
       should be able to make SSH connections from your program.

       This is what CVS for Windows does, for example.

   A.5 Details of PuTTY's operation

 A.5.1 What terminal type does PuTTY use?

       For most purposes, PuTTY can be considered to be an xterm terminal.

       PuTTY also supports some terminal control sequences not supported by
       the real xterm: notably the Linux console sequences that reconfigure
       the colour palette, and the title bar control sequences used by
       DECterm (which are different from the xterm ones; PuTTY supports
       both).

       By default, PuTTY announces its terminal type to the server as
       `xterm'. If you have a problem with this, you can reconfigure it to
       say something else; `vt220' might help if you have trouble.

 A.5.2 Where does PuTTY store its data?

       On Windows, PuTTY stores most of its data (saved sessions, SSH host
       keys) in the Registry. The precise location is

         HKEY_CURRENT_USER\Software\SimonTatham\PuTTY

       and within that area, saved sessions are stored under `Sessions'
       while host keys are stored under `SshHostKeys'.

       PuTTY also requires a random number seed file, to improve the
       unpredictability of randomly chosen data needed as part of the
       SSH cryptography. This is stored by default in a file called
       `PUTTY.RND'; this is stored by default in the `Application Data'
       directory, or failing that, one of a number of fallback locations.
       If you want to change the location of the random number seed file,
       you can put your chosen pathname in the Registry, at

         HKEY_CURRENT_USER\Software\SimonTatham\PuTTY\RandSeedFile

       You can ask PuTTY to delete all this data; see question A.8.2.

       On Unix, PuTTY stores all of this data in a directory ~/.putty by
       default.

 A.5.3 Why do small PuTTY icons appear next to the login prompts?

       As of PuTTY 0.71, some lines of text in the terminal window are
       marked with a small copy of the PuTTY icon (as far as pixels allow).

       This is to show trustworthiness. When the PuTTY icon appears next to
       a line of text, it indicates that that line of text was generated by
       PuTTY itself, and not generated by the server and sent to PuTTY.

       Text that comes from the server does not have this icon, and we've
       arranged that the server should not be able to fake it. (There's
       no control sequence the server can send which will make PuTTY draw
       its own icon, and if the server tries to move the cursor back up to
       a line that _already_ has an icon and overwrite the text, the icon
       will disappear.)

       This lets you tell the difference between (for example) a legitimate
       prompt in which PuTTY itself asks you for your private key
       passphrase, and a fake prompt in which the server tries to send
       the identical text to trick you into telling _it_ your private key
       passphrase.

 A.5.4 Why has Plink started saying `Press Return to begin session'?

       As of PuTTY 0.71, if you use Plink for an interactive SSH session,
       then after the login phase has finished, it will present a final
       interactive prompt saying `Access granted. Press Return to begin
       session'.

       This is another defence against servers trying to mimic the real
       authentication prompts after the session has started. When you pass
       through that prompt, you know that everything after it is generated
       by the server and not by Plink itself, so any request for your
       private key passphrase should be treated with suspicion.

       In Plink, we can't use the defence described in section A.5.3: Plink
       is running _in_ the terminal, so anything it can write into the
       terminal, the server could write in the same way after the session
       starts. And we can't just print a separator line without a pause,
       because then the server could simply move the cursor back up to
       it and overwrite it (probably with a brief flicker, but you might
       easily miss that). The only robust defence anyone has come up with
       involves this pause.

       If you trust your server not to be abusive, you can turn this
       off. It will also not appear in various other circumstances where
       Plink can be confident it isn't necessary. See section 7.2.3.6 for
       details.

   A.6 HOWTO questions

 A.6.1 What login name / password should I use?

       This is not a question you should be asking _us_.

       PuTTY is a communications tool, for making connections to other
       computers. We maintain the tool; we _don't_ administer any computers
       that you're likely to be able to use, in the same way that the
       people who make web browsers aren't responsible for most of the
       content you can view in them. We cannot help with questions of this
       sort.

       If you know the name of the computer you want to connect to, but
       don't know what login name or password to use, you should talk to
       whoever administers that computer. If you don't know who that is,
       see the next question for some possible ways to find out.

 A.6.2 What commands can I type into my PuTTY terminal window?

       Again, this is not a question you should be asking _us_. You need
       to read the manuals, or ask the administrator, of _the computer you
       have connected to_.

       PuTTY does not process the commands you type into it. It's only a
       communications tool. It makes a connection to another computer; it
       passes the commands you type to that other computer; and it passes
       the other computer's responses back to you. Therefore, the precise
       range of commands you can use will not depend on PuTTY, but on what
       kind of computer you have connected to and what software is running
       on it. The PuTTY team cannot help you with that.

       (Think of PuTTY as being a bit like a telephone. If you phone
       somebody up and you don't know what language to speak to make them
       understand you, it isn't _the telephone company_'s job to find that
       out for you. We just provide the means for you to get in touch;
       making yourself understood is somebody else's problem.)

       If you are unsure of where to start looking for the administrator
       of your server, a good place to start might be to remember how you
       found out the host name in the PuTTY configuration. If you were
       given that host name by e-mail, for example, you could try asking
       the person who sent you that e-mail. If your company's IT department
       provided you with ready-made PuTTY saved sessions, then that IT
       department can probably also tell you something about what commands
       you can type during those sessions. But the PuTTY maintainer team
       does not administer any server you are likely to be connecting to,
       and cannot help you with questions of this type.

 A.6.3 How can I make PuTTY start up maximised?

       Create a Windows shortcut to start PuTTY from, and set it as `Run
       Maximized'.

 A.6.4 How can I create a Windows shortcut to start a particular saved
       session directly?

       To run a PuTTY session saved under the name `mysession', create a
       Windows shortcut that invokes PuTTY with a command line like

         \path\name\to\putty.exe -load "mysession"

       (Note: prior to 0.53, the syntax was `@session'. This is now
       deprecated and may be removed at some point.)

 A.6.5 How can I start an SSH session straight from the command line?

       Use the command line `putty -ssh host.name'. Alternatively, create a
       saved session that specifies the SSH protocol, and start the saved
       session as shown in question A.6.4.

 A.6.6 How do I copy and paste between PuTTY and other Windows
       applications?

       Copy and paste works similarly to the X Window System. You use the
       left mouse button to select text in the PuTTY window. The act of
       selection _automatically_ copies the text to the clipboard: there
       is no need to press Ctrl-Ins or Ctrl-C or anything else. In fact,
       pressing Ctrl-C will send a Ctrl-C character to the other end of
       your connection (just like it does the rest of the time), which may
       have unpleasant effects. The _only_ thing you need to do, to copy
       text to the clipboard, is to select it.

       To paste the clipboard contents into a PuTTY window, by default you
       click the right mouse button. If you have a three-button mouse and
       are used to X applications, you can configure pasting to be done by
       the middle button instead, but this is not the default because most
       Windows users don't have a middle button at all.

       You can also paste by pressing Shift-Ins.

 A.6.7 How do I use all PuTTY's features (public keys, proxying, cipher
       selection, etc.) in PSCP, PSFTP and Plink?

       Most major features (e.g., public keys, port forwarding) are
       available through command line options. See section 3.11.3.

       Not all features are accessible from the command line yet, although
       we'd like to fix this. In the meantime, you can use most of PuTTY's
       features if you create a PuTTY saved session, and then use the name
       of the saved session on the command line in place of a hostname.
       This works for PSCP, PSFTP and Plink (but don't expect port
       forwarding in the file transfer applications!).

 A.6.8 How do I use PSCP.EXE? When I double-click it gives me a command
       prompt window which then closes instantly.

       PSCP is a command-line application, not a GUI application. If you
       run it without arguments, it will simply print a help message and
       terminate.

       To use PSCP properly, run it from a Command Prompt window. See
       chapter 5 in the documentation for more details.

 A.6.9 How do I use PSCP to copy a file whose name has spaces in?

       If PSCP is using the newer SFTP protocol (which is usual with most
       modern servers), this is straightforward; all filenames with spaces
       in are specified using a single pair of quotes in the obvious way:

         pscp "local file" user@host:
         pscp user@host:"remote file" .

       However, if PSCP is using the older SCP protocol for some reason,
       things are more confusing. If you're specifying a file at the local
       end, you just use one set of quotes as you would normally do:

         pscp "local filename with spaces" user@host:
         pscp user@host:myfile "local filename with spaces"

       But if the filename you're specifying is on the _remote_ side, you
       have to use backslashes and two sets of quotes:

         pscp user@host:"\"remote filename with spaces\"" local_filename
         pscp local_filename user@host:"\"remote filename with spaces\""

       Worse still, in a remote-to-local copy you have to specify the local
       file name explicitly, otherwise PSCP will complain that they don't
       match (unless you specified the `-unsafe' option). The following
       command will give an error message:

         c:\>pscp user@host:"\"oo er\"" .
         warning: remote host tried to write to a file called 'oo er'
                  when we requested a file called '"oo er"'.

       Instead, you need to specify the local file name in full:

         c:\>pscp user@host:"\"oo er\"" "oo er"

A.6.10 Should I run the 32-bit or the 64-bit version?

       If you're not sure, the 32-bit version is generally the safe option.
       It will run perfectly well on all processors and on all versions of
       Windows that PuTTY supports. PuTTY doesn't require to run as a 64-
       bit application to work well, and having a 32-bit PuTTY on a 64-bit
       system isn't likely to cause you any trouble.

       The 64-bit version (first released in 0.68) will only run if you
       have a 64-bit processor _and_ a 64-bit edition of Windows (both of
       these things are likely to be true of any recent Windows PC). It
       will run somewhat faster (in particular, the cryptography will be
       faster, especially during link setup), but it will consume slightly
       more memory.

       If you need to use an external DLL for GSSAPI authentication, that
       DLL may only be available in a 32-bit or 64-bit form, and that will
       dictate the version of PuTTY you need to use. (You will probably
       know if you're doing this; see section 4.23.2 in the documentation.)

   A.7 Troubleshooting

 A.7.1 Why do I see `Fatal: Protocol error: Expected control record' in
       PSCP?

       This happens because PSCP was expecting to see data from the server
       that was part of the PSCP protocol exchange, and instead it saw data
       that it couldn't make any sense of at all.

       This almost always happens because the startup scripts in your
       account on the server machine are generating output. This is
       impossible for PSCP, or any other SCP client, to work around. You
       should never use startup files (`.bashrc', `.cshrc' and so on) which
       generate output in non-interactive sessions.

       This is not actually a PuTTY problem. If PSCP fails in this way,
       then all other SCP clients are likely to fail in exactly the same
       way. The problem is at the server end.

 A.7.2 I clicked on a colour in the Colours panel, and the colour didn't
       change in my terminal.

       That isn't how you're supposed to use the Colours panel.

       During the course of a session, PuTTY potentially uses _all_ the
       colours listed in the Colours panel. It's not a question of using
       only one of them and you choosing which one; PuTTY will use them
       _all_. The purpose of the Colours panel is to let you adjust the
       appearance of all the colours. So to change the colour of the
       cursor, for example, you would select `Cursor Colour', press the
       `Modify' button, and select a new colour from the dialog box that
       appeared. Similarly, if you want your session to appear in green,
       you should select `Default Foreground' and press `Modify'. Clicking
       on `ANSI Green' won't turn your session green; it will only allow
       you to adjust the _shade_ of green used when PuTTY is instructed by
       the server to display green text.

 A.7.3 After trying to establish an SSH-2 connection, PuTTY says `Out of
       memory' and dies.

       If this happens just while the connection is starting up, this often
       indicates that for some reason the client and server have failed to
       establish a session encryption key. Somehow, they have performed
       calculations that should have given each of them the same key, but
       have ended up with different keys; so data encrypted by one and
       decrypted by the other looks like random garbage.

       This causes an `out of memory' error because the first encrypted
       data PuTTY expects to see is the length of an SSH message. Normally
       this will be something well under 100 bytes. If the decryption has
       failed, PuTTY will see a completely random length in the region of
       two _gigabytes_, and will try to allocate enough memory to store
       this non-existent message. This will immediately lead to it thinking
       it doesn't have enough memory, and panicking.

       If this happens to you, it is quite likely to still be a PuTTY bug
       and you should report it (although it might be a bug in your SSH
       server instead); but it doesn't necessarily mean you've actually run
       out of memory.

 A.7.4 When attempting a file transfer, either PSCP or PSFTP says `Out of
       memory' and dies.

       This is almost always caused by your login scripts on the server
       generating output. PSCP or PSFTP will receive that output when they
       were expecting to see the start of a file transfer protocol, and
       they will attempt to interpret the output as file-transfer protocol.
       This will usually lead to an `out of memory' error for much the same
       reasons as given in question A.7.3.

       This is a setup problem in your account on your server, _not_ a
       PSCP/PSFTP bug. Your login scripts should _never_ generate output
       during non-interactive sessions; secure file transfer is not the
       only form of remote access that will break if they do.

       On Unix, a simple fix is to ensure that all the parts of your login
       script that might generate output are in `.profile' (if you use a
       Bourne shell derivative) or `.login' (if you use a C shell). Putting
       them in more general files such as `.bashrc' or `.cshrc' is liable
       to lead to problems.

 A.7.5 PSFTP transfers files much slower than PSCP.

       The throughput of PSFTP 0.54 should be much better than 0.53b and
       prior; we've added code to the SFTP backend to queue several blocks
       of data rather than waiting for an acknowledgement for each. (The
       SCP backend did not suffer from this performance issue because SCP
       is a much simpler protocol.)

 A.7.6 When I run full-colour applications, I see areas of black space
       where colour ought to be, or vice versa.

       You almost certainly need to change the `Use background colour to
       erase screen' setting in the Terminal panel. If there is too much
       black space (the commoner situation), you should enable it, while
       if there is too much colour, you should disable it. (See section
       4.3.5.)

       In old versions of PuTTY, this was disabled by default, and would
       not take effect until you reset the terminal (see question A.7.7).
       Since 0.54, it is enabled by default, and changes take effect
       immediately.

 A.7.7 When I change some terminal settings, nothing happens.

       Some of the terminal options (notably Auto Wrap and background-
       colour screen erase) actually represent the _default_ setting,
       rather than the currently active setting. The server can send
       sequences that modify these options in mid-session, but when the
       terminal is reset (by server action, or by you choosing `Reset
       Terminal' from the System menu) the defaults are restored.

       In versions 0.53b and prior, if you change one of these options in
       the middle of a session, you will find that the change does not
       immediately take effect. It will only take effect once you reset the
       terminal.

       In version 0.54, the behaviour has changed - changes to these
       settings take effect immediately.

 A.7.8 My PuTTY sessions unexpectedly close after they are idle for a
       while.

       Some types of firewall, and almost any router doing Network Address
       Translation (NAT, also known as IP masquerading), will forget about
       a connection through them if the connection does nothing for too
       long. This will cause the connection to be rudely cut off when
       contact is resumed.

       You can try to combat this by telling PuTTY to send _keepalives_:
       packets of data which have no effect on the actual session, but
       which reassure the router or firewall that the network connection is
       still active and worth remembering about.

       Keepalives don't solve everything, unfortunately; although they
       cause greater robustness against this sort of router, they can also
       cause a _loss_ of robustness against network dropouts. See section
       4.14.1 in the documentation for more discussion of this.

 A.7.9 PuTTY's network connections time out too quickly when network
       connectivity is temporarily lost.

       This is a Windows problem, not a PuTTY problem. The timeout value
       can't be set on per application or per session basis. To increase
       the TCP timeout globally, you need to tinker with the Registry.

       On Windows 95, 98 or ME, the registry key you need to create or
       change is

         HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\VxD\
           MSTCP\MaxDataRetries

       (it must be of type DWORD in Win95, or String in Win98/ME). (See MS
       Knowledge Base article 158474 for more information.)

       On Windows NT, 2000, or XP, the registry key to create or change is

         HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\
           Parameters\TcpMaxDataRetransmissions

       and it must be of type DWORD. (See MS Knowledge Base articles 120642
       and 314053 for more information.)

       Set the key's value to something like 10. This will cause Windows to
       try harder to keep connections alive instead of abandoning them.

A.7.10 When I cat a binary file, I get `PuTTYPuTTYPuTTY' on my command
       line.

       Don't do that, then.

       This is designed behaviour; when PuTTY receives the character
       Control-E from the remote server, it interprets it as a request
       to identify itself, and so it sends back the string `PuTTY' as if
       that string had been entered at the keyboard. Control-E should only
       be sent by programs that are prepared to deal with the response.
       Writing a binary file to your terminal is likely to output many
       Control-E characters, and cause this behaviour. Don't do it. It's a
       bad plan.

       To mitigate the effects, you could configure the answerback string
       to be empty (see section 4.3.7); but writing binary files to your
       terminal is likely to cause various other unpleasant behaviour, so
       this is only a small remedy.

A.7.11 When I cat a binary file, my window title changes to a nonsense
       string.

       Don't do that, then.

       It is designed behaviour that PuTTY should have the ability
       to adjust the window title on instructions from the server.
       Normally the control sequence that does this should only be sent
       deliberately, by programs that know what they are doing and intend
       to put meaningful text in the window title. Writing a binary file to
       your terminal runs the risk of sending the same control sequence by
       accident, and cause unexpected changes in the window title. Don't do
       it.

A.7.12 My keyboard stops working once PuTTY displays the password prompt.

       No, it doesn't. PuTTY just doesn't display the password you type, so
       that someone looking at your screen can't see what it is.

       Unlike the Windows login prompts, PuTTY doesn't display the password
       as a row of asterisks either. This is so that someone looking at
       your screen can't even tell how _long_ your password is, which might
       be valuable information.

A.7.13 One or more function keys don't do what I expected in a server-side
       application.

       If you've already tried all the relevant options in the PuTTY
       Keyboard panel, you may need to mail the PuTTY maintainers and ask.

       It is _not_ usually helpful just to tell us which application,
       which server operating system, and which key isn't working; in
       order to replicate the problem we would need to have a copy of
       every operating system, and every application, that anyone has ever
       complained about.

       PuTTY responds to function key presses by sending a sequence of
       control characters to the server. If a function key isn't doing what
       you expect, it's likely that the character sequence your application
       is expecting to receive is not the same as the one PuTTY is sending.
       Therefore what we really need to know is _what_ sequence the
       application is expecting.

       The simplest way to investigate this is to find some other terminal
       environment, in which that function key _does_ work; and then
       investigate what sequence the function key is sending in that
       situation. One reasonably easy way to do this on a Unix system is
       to type the command `cat', and then press the function key. This is
       likely to produce output of the form `^[[11~'. You can also do this
       in PuTTY, to find out what sequence the function key is producing in
       that. Then you can mail the PuTTY maintainers and tell us `I wanted
       the F1 key to send `^[[11~', but instead it's sending `^[OP', can
       this be done?', or something similar.

       You should still read the Feedback page on the PuTTY website (also
       provided as appendix B in the manual), and follow the guidelines
       contained in that.

A.7.14 Why do I see `Couldn't load private key from ...'? Why can PuTTYgen
       load my key but not PuTTY?

       It's likely that you've generated an SSH protocol 2 key with
       PuTTYgen, but you're trying to use it in an SSH-1 connection. SSH-
       1 and SSH-2 keys have different formats, and (at least in 0.52)
       PuTTY's reporting of a key in the wrong format isn't optimal.

       To connect using SSH-2 to a server that supports both versions, you
       need to change the configuration from the default (see question
       A.2.1).

A.7.15 When I'm connected to a Red Hat Linux 8.0 system, some characters
       don't display properly.

       A common complaint is that hyphens in man pages show up as a-acute.

       With release 8.0, Red Hat appear to have made UTF-8 the default
       character set. There appears to be no way for terminal emulators
       such as PuTTY to know this (as far as we know, the appropriate
       escape sequence to switch into UTF-8 mode isn't sent).

       A fix is to configure sessions to RH8 systems to use UTF-8
       translation - see section 4.10.1 in the documentation. (Note that if
       you use `Change Settings', changes may not take place immediately -
       see question A.7.7.)

       If you really want to change the character set used by the server,
       the right place is `/etc/sysconfig/i18n', but this shouldn't be
       necessary.

A.7.16 Since I upgraded to PuTTY 0.54, the scrollback has stopped working
       when I run `screen'.

       PuTTY's terminal emulator has always had the policy that when the
       `alternate screen' is in use, nothing is added to the scrollback.
       This is because the usual sorts of programs which use the alternate
       screen are things like text editors, which tend to scroll back and
       forth in the same document a lot; so (a) they would fill up the
       scrollback with a large amount of unhelpfully disordered text, and
       (b) they contain their _own_ method for the user to scroll back to
       the bit they were interested in. We have generally found this policy
       to do the Right Thing in almost all situations.

       Unfortunately, `screen' is one exception: it uses the alternate
       screen, but it's still usually helpful to have PuTTY's scrollback
       continue working. The simplest solution is to go to the Features
       control panel and tick `Disable switching to alternate terminal
       screen'. (See section 4.6.4 for more details.) Alternatively, you
       can tell `screen' itself not to use the alternate screen: the
       `screen' FAQ suggests adding the line `termcapinfo xterm ti@:te@' to
       your .screenrc file.

       The reason why this only started to be a problem in 0.54 is because
       `screen' typically uses an unusual control sequence to switch to the
       alternate screen, and previous versions of PuTTY did not support
       this sequence.

A.7.17 Since I upgraded Windows XP to Service Pack 2, I can't use addresses
       like 127.0.0.2.

       Some people who ask PuTTY to listen on localhost addresses other
       than 127.0.0.1 to forward services such as SMB and Windows Terminal
       Services have found that doing so no longer works since they
       upgraded to WinXP SP2.

       This is apparently an issue with SP2 that is acknowledged by
       Microsoft in MS Knowledge Base article 884020. The article links to
       a fix you can download.

       (_However_, we've been told that SP2 _also_ fixes the bug that means
       you need to use non-127.0.0.1 addresses to forward Terminal Services
       in the first place.)

A.7.18 PSFTP commands seem to be missing a directory separator (slash).

       Some people have reported the following incorrect behaviour with
       PSFTP:

         psftp> pwd
         Remote directory is /dir1/dir2
         psftp> get filename.ext
         /dir1/dir2filename.ext: no such file or directory

       This is not a bug in PSFTP. There is a known bug in some versions of
       portable OpenSSH (bug 697) that causes these symptoms; it appears
       to have been introduced around 3.7.x. It manifests only on certain
       platforms (AIX is what has been reported to us).

       There is a patch for OpenSSH attached to that bug; it's also fixed
       in recent versions of portable OpenSSH (from around 3.8).

A.7.19 Do you want to hear about `Software caused connection abort'?

       In the documentation for PuTTY 0.53 and 0.53b, we mentioned that
       we'd like to hear about any occurrences of this error. Since the
       release of PuTTY 0.54, however, we've been convinced that this error
       doesn't indicate that PuTTY's doing anything wrong, and we don't
       need to hear about further occurrences. See section 10.16 for our
       current documentation of this error.

A.7.20 My SSH-2 session locks up for a few seconds every so often.

       Recent versions of PuTTY automatically initiate repeat key exchange
       once per hour, to improve session security. If your client or server
       machine is slow, you may experience this as a delay of anything up
       to thirty seconds or so.

       These delays are inconvenient, but they are there for your
       protection. If they really cause you a problem, you can choose to
       turn off periodic rekeying using the `Kex' configuration panel (see
       section 4.18), but be aware that you will be sacrificing security
       for this. (Falling back to SSH-1 would also remove the delays, but
       would lose a _lot_ more security still. We do not recommend it.)

A.7.21 PuTTY fails to start up. Windows claims that `the application
       configuration is incorrect'.

       This is caused by a bug in certain versions of Windows XP which is
       triggered by PuTTY 0.58. This was fixed in 0.59. The `xp-wont-run'
       entry in PuTTY's wishlist has more details.

A.7.22 When I put 32-bit PuTTY in C:\WINDOWS\SYSTEM32 on my 64-bit Windows
       system, `Duplicate Session' doesn't work.

       The short answer is not to put the PuTTY executables in that
       location.

       On 64-bit systems, C:\WINDOWS\SYSTEM32 is intended to contain
       only 64-bit binaries; Windows' 32-bit binaries live in
       C:\WINDOWS\SYSWOW64. When a 32-bit PuTTY executable runs on a 64-
       bit system, it cannot by default see the `real' C:\WINDOWS\SYSTEM32
       at all, because the File System Redirector arranges that the running
       program sees the appropriate kind of binaries in SYSTEM32. Thus,
       operations in the PuTTY suite that involve it accessing its own
       executables, such as `New Session' and `Duplicate Session', will not
       work.

A.7.23 After I upgraded PuTTY to 0.68, I can no longer connect to my
       embedded device or appliance.

       If your SSH server has started unexpectedly closing SSH connections
       after you enter your password, and it worked before 0.68, you may
       have a buggy server that objects to certain SSH protocol extensions.

       The SSH protocol recently gained a new `terminal mode', IUTF8, which
       PuTTY sends by default; see section 4.24.2. This is the first new
       terminal mode since the SSH-2 protocol was defined. While servers
       are supposed to ignore modes they don't know about, some buggy
       servers will unceremoniously close the connection if they see
       anything they don't recognise. SSH servers in embedded devices,
       network appliances, and the like seem to disproportionately have
       this bug.

       If you think you have such a server, from 0.69 onwards you can
       disable sending of the IUTF8 mode: on the SSH / TTY panel, select
       IUTF8 on the list, select `Nothing', and press `Set'. (It's not
       possible to disable sending this mode in 0.68.)

A.7.24 Since 0.78, I can't find where to configure my SSH private key.

       In PuTTY 0.78, the `Private key file for authentication' control,
       where you specify a `.PPK' file for SSH public key authentication,
       moved to a new `Credentials' panel in the configuration dialog. You
       can find this by opening the `SSH' category in the tree view on the
       left, then opening the `Auth' subcategory under that, then clicking
       on `Credentials'. On this page you'll find the `Browse...' button
       you need to select a `.PPK' file for authentication, as described in
       section 4.22.1.

       (This control had previously been on the `Auth' panel since public
       key authentication was first released in 2002, so many online how-
       to guides still describe it there. The configuration controls were
       reorganised to make room for features added in 0.78, such as OpenSSH
       certificates.)

   A.8 Security questions

 A.8.1 Is it safe for me to download PuTTY and use it on a public PC?

       It depends on whether you trust that PC. If you don't trust the
       public PC, don't use PuTTY on it, and don't use any other software
       you plan to type passwords into either. It might be watching your
       keystrokes, or it might tamper with the PuTTY binary you download.
       There is _no_ program safe enough that you can run it on an actively
       malicious PC and get away with typing passwords into it.

       If you do trust the PC, then it's probably OK to use PuTTY on it
       (but if you don't trust the network, then the PuTTY download might
       be tampered with, so it would be better to carry PuTTY with you on a
       USB stick).

 A.8.2 What does PuTTY leave on a system? How can I clean up after it?

       PuTTY will leave some Registry entries, and a random seed file, on
       the PC (see question A.5.2). Windows 7 and up also remember some
       information about recently launched sessions for the `jump list'
       feature.

       If you are using PuTTY on a public PC, or somebody else's PC, you
       might want to clean this information up when you leave. You can do
       that automatically, by running the command `putty -cleanup'. See
       section 3.11.2 in the documentation for more detail. (Note that this
       only removes settings for the currently logged-in user on multi-user
       systems.)

       If PuTTY was installed from the installer package, it will also
       appear in `Add/Remove Programs'. Current versions of the installer
       do not offer to remove the above-mentioned items, so if you want
       them removed you should run `putty -cleanup' before uninstalling.

 A.8.3 How come PuTTY now supports DSA, when the website used to say how
       insecure it was?

       DSA has a major weakness _if badly implemented_: it relies on a
       random number generator to far too great an extent. If the random
       number generator produces a number an attacker can predict, the DSA
       private key is exposed - meaning that the attacker can log in as you
       on all systems that accept that key.

       The PuTTY policy changed because the developers were informed of
       ways to implement DSA which do not suffer nearly as badly from this
       weakness, and indeed which don't need to rely on random numbers at
       all. For this reason we now believe PuTTY's DSA implementation is
       probably OK.

       The recently added elliptic-curve signature methods are also DSA-
       style algorithms, so they have this same weakness in principle. Our
       ECDSA implementation uses the same defence as DSA, while our Ed25519
       implementation uses the similar system (but different in details)
       that the Ed25519 spec mandates.

 A.8.4 Couldn't Pageant use VirtualLock() to stop private keys being
       written to disk?

       Unfortunately not. The VirtualLock() function in the Windows API
       doesn't do a proper job: it may prevent small pieces of a process's
       memory from being paged to disk while the process is running, but
       it doesn't stop the process's memory as a whole from being swapped
       completely out to disk when the process is long-term inactive. And
       Pageant spends most of its time inactive.

 A.8.5 Is the version of PuTTY in the Microsoft Store legit?

       The free-of-charge `PuTTY' application at this link is published
       and maintained by us. The copy there is the latest release, usually
       updated within a few days of us publishing it on our own website.

       There have been other copies of PuTTY on the store, some looking
       quite similar, and some charging money. Those were uploaded by other
       people, and we can't guarantee anything about them.

       The first version we published to the Microsoft Store was 0.76 (some
       time after its initial release on our website).

   A.9 Administrative questions

 A.9.1 Is putty.org your website?

       No, it isn't. putty.org is run by an opportunist who uses it to
       advertise their own commercial SSH implementation to people looking
       for our free one. We don't own that site, we can't control it, and
       we don't advise anyone to use it in preference to our own site.

       The real PuTTY web site, run by the PuTTY team, has always been at
       https://www.chiark.greenend.org.uk/~sgtatham/putty/.

 A.9.2 Why do the download links point to the.earth.li and not chiark? Has
       your website been hacked?

       We haven't been hacked: links to the.earth.li are legit. The files
       for released versions of PuTTY are hosted on a different server from
       the web pages, for bandwidth reasons.

       The download site the.earth.li is hosted by Mythic Beasts, and we're
       very grateful to them!

 A.9.3 Would you like me to register you a nicer domain name?

       No, thank you. Even if you can find one (most of them seem to
       have been registered already, by people who didn't ask whether we
       actually wanted it before they applied), we're happy with the PuTTY
       web site being exactly where it is. It's not hard to find (just type
       `putty' into google.com and we're the first link returned), and we
       don't believe the administrative hassle of moving the site would be
       worth the benefit.

       In addition, if we _did_ want a custom domain name, we would want to
       run it ourselves, so we knew for certain that it would continue to
       point where we wanted it, and wouldn't suddenly change or do strange
       things. Having it registered for us by a third party who we don't
       even know is not the best way to achieve this.

 A.9.4 Would you like free web hosting for the PuTTY web site?

       We already have some, thanks.

 A.9.5 Would you link to my web site from the PuTTY web site?

       Only if the content of your web page is of definite direct interest
       to PuTTY users. If your content is unrelated, or only tangentially
       related, to PuTTY, then the link would simply be advertising for
       you.

       One very nice effect of the Google ranking mechanism is that by and
       large, the most popular web sites get the highest rankings. This
       means that when an ordinary person does a search, the top item in
       the search is very likely to be a high-quality site or the site they
       actually wanted, rather than the site which paid the most money for
       its ranking.

       The PuTTY web site is held in high esteem by Google, for precisely
       this reason: lots of people have linked to it simply because they
       like PuTTY, without us ever having to ask anyone to link to us. We
       feel that it would be an abuse of this esteem to use it to boost the
       ranking of random advertisers' web sites. If you want your web site
       to have a high Google ranking, we'd prefer that you achieve this the
       way we did - by being good enough at what you do that people will
       link to you simply because they like you.

       In particular, we aren't interested in trading links for money
       (see above), and we _certainly_ aren't interested in trading links
       for other links (since we have no advertising on our web site, our
       Google ranking is not even directly worth anything to us). If we
       don't want to link to you for free, then we probably won't want to
       link to you at all.

       If you have software based on PuTTY, or specifically designed to
       interoperate with PuTTY, or in some other way of genuine interest to
       PuTTY users, then we will probably be happy to add a link to you on
       our Links page. And if you're running a particularly valuable mirror
       of the PuTTY web site, we might be interested in linking to you from
       our Mirrors page.

 A.9.6 Why don't you move PuTTY to SourceForge?

       Partly, because we don't want to move the web site location (see
       question A.9.3).

       Also, security reasons. PuTTY is a security product, and as such it
       is particularly important to guard the code and the web site against
       unauthorised modifications which might introduce subtle security
       flaws. Therefore, we prefer that the Git repository, web site and
       FTP site remain where they are, under the direct control of system
       administrators we know and trust personally, rather than being run
       by a large organisation full of people we've never met and which is
       known to have had breakins in the past.

       No offence to SourceForge; I think they do a wonderful job. But
       they're not ideal for everyone, and in particular they're not ideal
       for us.

 A.9.7 Why can't I subscribe to the putty-bugs mailing list?

       Because you're not a member of the PuTTY core development team. The
       putty-bugs mailing list is not a general newsgroup-like discussion
       forum; it's a contact address for the core developers, and an
       _internal_ mailing list for us to discuss things among ourselves.
       If we opened it up for everybody to subscribe to, it would turn
       into something more like a newsgroup and we would be completely
       overwhelmed by the volume of traffic. It's hard enough to keep up
       with the list as it is.

 A.9.8 If putty-bugs isn't a general-subscription mailing list, what is?

       There isn't one, that we know of.

       If someone else wants to set up a mailing list or other forum for
       PuTTY users to help each other with common problems, that would be
       fine with us, though the PuTTY team would almost certainly not have
       the time to read it.

 A.9.9 How can I donate to PuTTY development?

       Please, _please_ don't feel you have to. PuTTY is completely free
       software, and not shareware. We think it's very important that
       _everybody_ who wants to use PuTTY should be able to, whether they
       have any money or not; so the last thing we would want is for a
       PuTTY user to feel guilty because they haven't paid us any money. If
       you want to keep your money, please do keep it. We wouldn't dream of
       asking for any.

       Having said all that, if you still really _want_ to give us money,
       we won't argue :-) The easiest way for us to accept donations is if
       you send money to <anakin@pobox.com> using PayPal (www.paypal.com).
       If you don't like PayPal, talk to us; we can probably arrange some
       alternative means.

       Small donations (tens of dollars or tens of euros) will probably be
       spent on beer or curry, which helps motivate our volunteer team to
       continue doing this for the world. Larger donations will be spent on
       something that actually helps development, if we can find anything
       (perhaps new hardware, or a new version of Windows), but if we
       can't find anything then we'll just distribute the money among the
       developers. If you want to be sure your donation is going towards
       something worthwhile, ask us first. If you don't like these terms,
       feel perfectly free not to donate. We don't mind.

A.9.10 Can I have permission to put PuTTY on a cover disk / distribute it
       with other software / etc?

       Yes. For most things, you need not bother asking us explicitly for
       permission; our licence already grants you permission.

       See section B.9 for more details.

A.9.11 Can you sign an agreement indemnifying us against security problems
       in PuTTY?

       No!

       A vendor of physical security products (e.g. locks) might plausibly
       be willing to accept financial liability for a product that failed
       to perform as advertised and resulted in damage (e.g. valuables
       being stolen). The reason they can afford to do this is because they
       sell a _lot_ of units, and only a small proportion of them will
       fail; so they can meet their financial liability out of the income
       from all the rest of their sales, and still have enough left over
       to make a profit. Financial liability is intrinsically linked to
       selling your product for money.

       There are two reasons why PuTTY is not analogous to a physical
       lock in this context. One is that software products don't exhibit
       random variation: _if_ PuTTY has a security hole (which does happen,
       although we do our utmost to prevent it and to respond quickly
       when it does), every copy of PuTTY will have the same hole, so
       it's likely to affect all the users at the same time. So even if
       our users were all paying us to use PuTTY, we wouldn't be able to
       _simultaneously_ pay every affected user compensation in excess of
       the amount they had paid us in the first place. It just wouldn't
       work.

       The second, much more important, reason is that PuTTY users _don't_
       pay us. The PuTTY team does not have an income; it's a volunteer
       effort composed of people spending their spare time to try to write
       useful software. We aren't even a company or any kind of legally
       recognised organisation. We're just a bunch of people who happen to
       do some stuff in our spare time.

       Therefore, to ask us to assume financial liability is to ask us to
       assume a risk of having to pay it out of our own _personal_ pockets:
       out of the same budget from which we buy food and clothes and pay
       our rent. That's more than we're willing to give. We're already
       giving a lot of our spare _time_ to developing software for free; if
       we had to pay our own _money_ to do it as well, we'd start to wonder
       why we were bothering.

       Free software fundamentally does not work on the basis of financial
       guarantees. Your guarantee of the software functioning correctly is
       simply that you have the source code and can check it before you
       use it. If you want to be sure there aren't any security holes, do
       a security audit of the PuTTY code, or hire a security engineer if
       you don't have the necessary skills yourself: instead of trying to
       ensure you can get compensation in the event of a disaster, try to
       ensure there isn't a disaster in the first place.

       If you _really_ want financial security, see if you can find a
       security engineer who will take financial responsibility for the
       correctness of their review. (This might be less likely to suffer
       from the everything-failing-at-once problem mentioned above, because
       such an engineer would probably be reviewing a lot of _different_
       products which would tend to fail independently.) Failing that,
       see if you can persuade an insurance company to insure you against
       security incidents, and if the insurer demands it as a condition
       then get our code reviewed by a security engineer they're happy
       with.

A.9.12 Can you sign this form granting us permission to use/distribute
       PuTTY?

       If your form contains any clause along the lines of `the undersigned
       represents and warrants', we're not going to sign it. This is
       particularly true if it asks us to warrant that PuTTY is secure;
       see question A.9.11 for more discussion of this. But it doesn't
       really matter what we're supposed to be warranting: even if it's
       something we already believe is true, such as that we don't infringe
       any third-party copyright, we will not sign a document accepting
       any legal or financial liability. This is simply because the PuTTY
       development project has no income out of which to satisfy that
       liability, or pay legal costs, should it become necessary. We cannot
       afford to be sued. We are assuring you that _we have done our best_;
       if that isn't good enough for you, tough.

       The existing PuTTY licence document already gives you permission
       to use or distribute PuTTY in pretty much any way which does not
       involve pretending you wrote it or suing us if it goes wrong. We
       think that really ought to be enough for anybody.

       See also question A.9.14 for another reason why we don't want to do
       this sort of thing.

A.9.13 Can you write us a formal notice of permission to use PuTTY?

       We could, in principle, but it isn't clear what use it would be. If
       you think there's a serious chance of one of the PuTTY copyright
       holders suing you (which we don't!), you would presumably want a
       signed notice from _all_ of them; and we couldn't provide that even
       if we wanted to, because many of the copyright holders are people
       who contributed some code in the past and with whom we subsequently
       lost contact. Therefore the best we would be able to do _even
       in theory_ would be to have the core development team sign the
       document, which wouldn't guarantee you that some other copyright
       holder might not sue.

       See also question A.9.14 for another reason why we don't want to do
       this sort of thing.

A.9.14 Can you sign _anything_ for us?

       Not unless there's an incredibly good reason.

       We are generally unwilling to set a precedent that involves us
       having to enter into individual agreements with PuTTY users.
       We estimate that we have literally _millions_ of users, and we
       absolutely would not have time to go round signing specific
       agreements with every one of them. So if you want us to sign
       something specific for you, you might usefully stop to consider
       whether there's anything special that distinguishes you from 999,999
       other users, and therefore any reason we should be willing to sign
       something for you without it setting such a precedent.

       If your company policy requires you to have an individual agreement
       with the supplier of any software you use, then your company policy
       is simply not well suited to using popular free software, and we
       urge you to consider this as a flaw in your policy.

A.9.15 If you won't sign anything, can you give us some sort of assurance
       that you won't make PuTTY closed-source in future?

       Yes and no.

       If what you want is an assurance that some _current version_ of
       PuTTY which you've already downloaded will remain free, then you
       already have that assurance: it's called the PuTTY Licence. It
       grants you permission to use, distribute and copy the software to
       which it applies; once we've granted that permission (which we
       have), we can't just revoke it.

       On the other hand, if you want an assurance that _future_ versions
       of PuTTY won't be closed-source, that's more difficult. We could
       in principle sign a document stating that we would never release a
       closed-source PuTTY, but that wouldn't assure you that we _would_
       keep releasing _open_-source PuTTYs: we would still have the option
       of ceasing to develop PuTTY at all, which would surely be even worse
       for you than making it closed-source! (And we almost certainly
       wouldn't _want_ to sign a document guaranteeing that we would
       actually continue to do development work on PuTTY; we certainly
       wouldn't sign it for free. Documents like that are called contracts
       of employment, and are generally not signed except in return for a
       sizeable salary.)

       If we _were_ to stop developing PuTTY, or to decide to make all
       future releases closed-source, then you would still be free to copy
       the last open release in accordance with the current licence, and in
       particular you could start your own fork of the project from that
       release. If this happened, I confidently predict that _somebody_
       would do that, and that some kind of a free PuTTY would continue
       to be developed. There's already precedent for that sort of thing
       happening in free software. We can't guarantee that somebody _other
       than you_ would do it, of course; you might have to do it yourself.
       But we can assure you that there would be nothing _preventing_
       anyone from continuing free development if we stopped.

       (Finally, we can also confidently predict that if we made PuTTY
       closed-source and someone made an open-source fork, most people
       would switch to the latter. Therefore, it would be pretty stupid of
       us to try it.)

A.9.16 Can you provide us with export control information / FIPS
       certification for PuTTY?

       Some people have asked us for an Export Control Classification
       Number (ECCN) for PuTTY. We don't know whether we have one, and as a
       team of free software developers based in the UK we don't have the
       time, money, or effort to deal with US bureaucracy to investigate
       any further. We believe that PuTTY falls under 5D002 on the US
       Commerce Control List, but that shouldn't be taken as definitive.
       If you need to know more you should seek professional legal advice.
       The same applies to any other country's legal requirements and
       restrictions.

       Similarly, some people have asked us for FIPS certification of the
       PuTTY tools. Unless someone else is prepared to do the necessary
       work and pay any costs, we can't provide this.

A.9.17 As one of our existing software vendors, can you just fill in this
       questionnaire for us?

       We periodically receive requests like this, from organisations
       which have apparently sent out a form letter to everyone listed in
       their big spreadsheet of `software vendors' requiring them all to
       answer some long list of questions about supported OS versions, paid
       support arrangements, compliance with assorted local regulations
       we haven't heard of, contact phone numbers, and other such
       administrivia. Many of the questions are obviously meaningless when
       applied to PuTTY (we don't provide any paid support in the first
       place!), most of the rest could have been answered with only a very
       quick look at our website, and some we are actively unwilling to
       answer (we are private individuals, why would we want to give out
       our home phone numbers to large corporations?).

       We don't make a habit of responding in full to these questionnaires,
       because _we are not a software vendor_.

       A software _vendor_ is a company to which you are paying lots of
       money in return for some software. They know who you are, and they
       know you're paying them money; so they have an incentive to fill in
       your forms and questionnaires, to research any local regulations you
       cite if they don't already know about them, and generally to provide
       every scrap of information you might possibly need in the most
       convenient manner for you, because they want to keep being paid.

       But we are a team of free software developers, and that means your
       relationship with us is nothing like that at all. If you once
       downloaded our software from our website, that's great and we hope
       you found it useful, but it doesn't mean we have the least idea who
       you are, or any incentive to do lots of unpaid work to support our
       `relationship' with you.

       It's not that we are unwilling to _provide information_. We put as
       much of it as we can on our website for your convenience, and if you
       actually need to know some fact about PuTTY which you haven't been
       able to find on the website (and which is not obviously inapplicable
       to free software in the first place) then please do ask us, and
       we'll try to answer as best we can. But we put up the website and
       this FAQ precisely so that we _don't_ have to keep answering the
       same questions over and over again, so we aren't prepared to fill in
       completely generic form-letter questionnaires for people who haven't
       done their best to find the answers here first.

       If you work for an organisation which you think might be at risk of
       making this mistake, we urge you to reorganise your list of software
       suppliers so that it clearly distinguishes paid vendors who know
       about you from free software developers who don't have any idea who
       you are. Then, only send out these mass mailings to the former.

A.9.18 The `sha1sums' / `sha256sums' / etc files on your download page
       don't match the binaries.

       People report this every so often, and usually the reason turns out
       to be that they've matched up the wrong checksums file with the
       wrong binaries.

       The PuTTY download page contains more than one version of the
       software. There's a _latest release_ version; there are the
       _development snapshots_; and when we're in the run-up to making a
       release, there are also _pre-release_ builds of the upcoming new
       version. Each one has its own collection of binaries, and its own
       collection of checksums files to go with them.

       So if you've downloaded the release version of the actual program,
       you need the release version of the checksums too, otherwise you
       will see a mismatch. Similarly, the development snapshot binaries go
       with the development snapshot checksums, and so on. (We've colour-
       coded the download page in an effort to reduce this confusion a
       bit.)

       Another thing to watch out for: as of 0.71, executables like
       `putty.exe' come in two flavours for each platform: the standalone
       versions on the website, each of which contains embedded help, and
       the versions installed by the installer, which use a separate help
       file also in the installer. We provide checksums for both; the
       latter are indicated with `(installer version)' after the filename.

       If you have double-checked all that, and you still think there's
       a real mismatch, then please send us a report carefully quoting
       everything relevant:

        -  the exact URL you got your binary from

        -  the checksum of the binary after you downloaded

        -  the exact URL you got your checksums file from

        -  the checksum that file says the binary should have.

  A.10 Miscellaneous questions

A.10.1 Is PuTTY a port of OpenSSH, or based on OpenSSH or OpenSSL?

       No, it isn't. PuTTY is almost completely composed of code written
       from scratch for PuTTY. The only code we share with OpenSSH is the
       detector for SSH-1 CRC compensation attacks, written by CORE SDI
       S.A; we share no code at all with OpenSSL.

A.10.2 Where can I buy silly putty?

       You're looking at the wrong web site; the only PuTTY we know about
       here is the name of a computer program.

       If you want the kind of putty you can buy as an executive toy, the
       PuTTY team can personally recommend Thinking Putty, which you can
       buy from Crazy Aaron's Putty World, at www.puttyworld.com.

A.10.3 What does `PuTTY' mean?

       It's the name of a popular SSH and Telnet client. Any other meaning
       is in the eye of the beholder. It's been rumoured that `PuTTY' is
       the antonym of `getty', or that it's the stuff that makes your
       Windows useful, or that it's a kind of plutonium Teletype. We
       couldn't possibly comment on such allegations.

A.10.4 How do I pronounce `PuTTY'?

       Exactly like the English word `putty', which we pronounce /'pVti/.

Appendix B: Feedback and bug reporting
--------------------------------------

       This is a guide to providing feedback to the PuTTY development team.
       It is provided as both a web page on the PuTTY site, and an appendix
       in the PuTTY manual.

       Section B.1 gives some general guidelines for sending any kind of e-
       mail to the development team. Following sections give more specific
       guidelines for particular types of e-mail, such as bug reports and
       feature requests.

   B.1 General guidelines

       The PuTTY development team gets a _lot_ of mail. If you can possibly
       solve your own problem by reading the manual, reading the FAQ,
       reading the web site, asking a fellow user, or some other means,
       then it would make our lives much easier.

       We get so much e-mail that we literally do not have time to answer
       it all. We regret this, but there's nothing we can do about it.
       So if you can _possibly_ avoid sending mail to the PuTTY team, we
       recommend you do so. In particular, support requests (section B.7)
       are probably better sent to some public forum, or passed to a local
       expert if possible.

       The PuTTY contact email address is a private mailing list containing
       four or five core developers. Don't be put off by it being a mailing
       list: if you need to send confidential data as part of a bug report,
       you can trust the people on the list to respect that confidence.
       Also, the archives aren't publicly available, so you shouldn't be
       letting yourself in for any spam by sending us mail.

       Please use a meaningful subject line on your message. We get a lot
       of mail, and it's hard to find the message we're looking for if they
       all have subject lines like `PuTTY bug'.

 B.1.1 Sending large attachments

       Since the PuTTY contact address is a mailing list, e-mails larger
       than 40Kb will be held for inspection by the list administrator, and
       will not be allowed through unless they really appear to be worth
       their large size.

       If you are considering sending any kind of large data file to the
       PuTTY team, it's almost always a bad idea, or at the very least it
       would be better to ask us first whether we actually need the file.
       Alternatively, you could put the file on a web site and just send us
       the URL; that way, we don't have to download it unless we decide we
       actually need it, and only one of us needs to download it instead of
       it being automatically copied to all the developers.

       (If the file contains confidential information, then you could
       encrypt it with our Secure Contact Key; see section F.1 for
       details. Please _only_ use this for information that _needs_ to be
       confidential.)

       Some people like to send mail in MS Word format. Please _don't_
       send us bug reports, or any other mail, as a Word document. Word
       documents are roughly fifty times larger than writing the same
       report in plain text. In addition, most of the PuTTY team read their
       e-mail on Unix machines, so copying the file to a Windows box to run
       Word is very inconvenient. Not only that, but several of us don't
       even _have_ a copy of Word!

       Some people like to send us screen shots when demonstrating a
       problem. Please don't do this without checking with us first
       - we almost never actually need the information in the screen
       shot. Sending a screen shot of an error box is almost certainly
       unnecessary when you could just tell us in plain text what the
       error was. (On some versions of Windows, pressing Ctrl-C when the
       error box is displayed will copy the text of the message to the
       clipboard.) Sending a full-screen shot is _occasionally_ useful, but
       it's probably still wise to check whether we need it before sending
       it.

       If you _must_ mail a screen shot, don't send it as a .BMP file. BMPs
       have no compression and they are _much_ larger than other image
       formats such as PNG, TIFF and GIF. Convert the file to a properly
       compressed image format before sending it.

       Please don't mail us executables, at all. Our mail server blocks all
       incoming e-mail containing executables, as a defence against the
       vast numbers of e-mail viruses we receive every day. If you mail us
       an executable, it will just bounce.

       If you have made a tiny modification to the PuTTY code, please
       send us a _patch_ to the source code if possible, rather than
       sending us a huge .ZIP file containing the complete sources plus
       your modification. If you've only changed 10 lines, we'd prefer to
       receive a mail that's 30 lines long than one containing multiple
       megabytes of data we already have.

   B.2 Reporting bugs

       If you think you have found a bug in PuTTY, your first steps should
       be:

        -  Check the Wishlist page on the PuTTY website, and see if we
           already know about the problem. If we do, it is almost certainly
           not necessary to mail us about it, unless you think you have
           extra information that might be helpful to us in fixing it. (Of
           course, if we actually _need_ specific extra information about a
           particular bug, the Wishlist page will say so.)

        -  Check the Change Log on the PuTTY website, and see if we have
           already fixed the bug in the development snapshots.

        -  Check the FAQ on the PuTTY website (also provided as appendix
           A in the manual), and see if it answers your question. The FAQ
           lists the most common things which people think are bugs, but
           which aren't bugs.

        -  Download the latest development snapshot and see if the problem
           still happens with that. This really is worth doing. As a
           general rule we aren't very interested in bugs that appear in
           the release version but not in the development version, because
           that usually means they are bugs we have _already fixed_. On the
           other hand, if you can find a bug in the development version
           that doesn't appear in the release, that's likely to be a new
           bug we've introduced since the release and we're definitely
           interested in it.

       If none of those options solved your problem, and you still need
       to report a bug to us, it is useful if you include some general
       information:

        -  Tell us what version of PuTTY you are running. To find this
           out, use the `About PuTTY' option from the System menu. Please
           _do not_ just tell us `I'm running the latest version'; e-mail
           can be delayed and it may not be obvious which version was the
           latest at the time you sent the message.

        -  PuTTY is a multi-platform application; tell us what version of
           what OS you are running PuTTY on. (If you're running on Unix,
           or Windows for Arm, tell us, or we'll assume you're running on
           Windows for Intel as this is overwhelmingly the case.)

        -  Tell us what protocol you are connecting with: SSH, Telnet,
           Rlogin, SUPDUP, or Raw mode, or a serial connection.

        -  Tell us what kind of server you are connecting to; what OS, and
           if possible what SSH server (if you're using SSH). You can get
           some of this information from the PuTTY Event Log (see section
           3.1.3.1 in the manual).

        -  Send us the contents of the PuTTY Event Log, unless you have a
           specific reason not to (for example, if it contains confidential
           information that you think we should be able to solve your
           problem without needing to know).

        -  Try to give us as much information as you can to help us see
           the problem for ourselves. If possible, give us a step-by-step
           sequence of _precise_ instructions for reproducing the fault.

        -  Don't just tell us that PuTTY `does the wrong thing'; tell us
           exactly and precisely what it did, and also tell us exactly
           and precisely what you think it should have done instead. Some
           people tell us PuTTY does the wrong thing, and it turns out that
           it was doing the right thing and their expectations were wrong.
           Help to avoid this problem by telling us exactly what you think
           it should have done, and exactly what it did do.

        -  If you think you can, you're welcome to try to fix the
           problem yourself. A patch to the code which fixes a bug is an
           excellent addition to a bug report. However, a patch is never a
           _substitute_ for a good bug report; if your patch is wrong or
           inappropriate, and you haven't supplied us with full information
           about the actual bug, then we won't be able to find a better
           solution.

        -  https://www.chiark.greenend.org.uk/~sgtatham/bugs.html is an
           article on how to report bugs effectively in general. If your
           bug report is _particularly_ unclear, we may ask you to go away,
           read this article, and then report the bug again.

       It is reasonable to report bugs in PuTTY's documentation, if you
       think the documentation is unclear or unhelpful. But we do need
       to be given exact details of _what_ you think the documentation
       has failed to tell you, or _how_ you think it could be made
       clearer. If your problem is simply that you don't _understand_
       the documentation, we suggest asking around and seeing if someone
       will explain what you need to know. _Then_, if you think the
       documentation could usefully have told you that, send us a bug
       report and explain how you think we should change it.

   B.3 Reporting security vulnerabilities

       If you've found a security vulnerability in PuTTY, you might well
       want to notify us using an encrypted communications channel, to
       avoid disclosing information about the vulnerability before a fixed
       release is available.

       For this purpose, we provide a GPG key suitable for encryption: the
       Secure Contact Key. See section F.1 for details of this.

       (Of course, vulnerabilities are also bugs, so please do include as
       much information as possible about them, the same way you would with
       any other bug report.)

   B.4 Requesting extra features

       If you want to request a new feature in PuTTY, the very first things
       you should do are:

        -  Check the Wishlist page on the PuTTY website, and see if your
           feature is already on the list. If it is, it probably won't
           achieve very much to repeat the request. (But see section B.5 if
           you want to persuade us to give your particular feature higher
           priority.)

        -  Check the Wishlist and Change Log on the PuTTY website, and
           see if we have already added your feature in the development
           snapshots. If it isn't clear, download the latest development
           snapshot and see if the feature is present. If it is, then it
           will also be in the next release and there is no need to mail us
           at all.

       If you can't find your feature in either the development snapshots
       _or_ the Wishlist, then you probably do need to submit a feature
       request. Since the PuTTY authors are very busy, it helps if you try
       to do some of the work for us:

        -  Do as much of the design as you can. Think about `corner cases';
           think about how your feature interacts with other existing
           features. Think about the user interface; if you can't come
           up with a simple and intuitive interface to your feature, you
           shouldn't be surprised if we can't either. Always imagine
           whether it's possible for there to be more than one, or less
           than one, of something you'd assumed there would be one of.
           (For example, if you were to want PuTTY to put an icon in the
           System tray rather than the Taskbar, you should think about what
           happens if there's more than one PuTTY active; how would the
           user tell which was which?)

        -  If you can program, it may be worth offering to write the
           feature yourself and send us a patch. However, it is likely to
           be helpful if you confer with us first; there may be design
           issues you haven't thought of, or we may be about to make big
           changes to the code which your patch would clash with, or
           something. If you check with the maintainers first, there is a
           better chance of your code actually being usable. Also, read the
           design principles listed in appendix E: if you do not conform to
           them, we will probably not be able to accept your patch.

   B.5 Requesting features that have already been requested

       If a feature is already listed on the Wishlist, then it usually
       means we would like to add it to PuTTY at some point. However, this
       may not be in the near future. If there's a feature on the Wishlist
       which you would like to see in the _near_ future, there are several
       things you can do to try to increase its priority level:

        -  Mail us and vote for it. (Be sure to mention that you've seen
           it on the Wishlist, or we might think you haven't even _read_
           the Wishlist). This probably won't have very _much_ effect; if
           a huge number of people vote for something then it may make a
           difference, but one or two extra votes for a particular feature
           are unlikely to change our priority list immediately. Offering a
           new and compelling justification might help. Also, don't expect
           a reply.

        -  Offer us money if we do the work sooner rather than later. This
           sometimes works, but not always. The PuTTY team all have full-
           time jobs and we're doing all of this work in our free time; we
           may sometimes be willing to give up some more of our free time
           in exchange for some money, but if you try to bribe us for a
           _big_ feature it's entirely possible that we simply won't have
           the time to spare - whether you pay us or not. (Also, we don't
           accept bribes to add _bad_ features to the Wishlist, because
           our desire to provide high-quality software to the users comes
           first.)

        -  Offer to help us write the code. This is probably the _only_ way
           to get a feature implemented quickly, if it's a big one that we
           don't have time to do ourselves.

   B.6 Workarounds for SSH server bugs

       It's normal for SSH implementations to automatically enable
       workarounds for each other's bugs, using the software version
       strings that are exchanged at the start of the connection. Typically
       an SSH client will have a list of server version strings that it
       believes to have particular bugs, and auto-enable the appropriate
       set of workarounds when it sees one of those strings. (And servers
       will have a similar list of workarounds for _client_ software they
       believe to be buggy.)

       If you've found a bug in an SSH server, and you'd like us to add
       an auto-detected workaround for it, our policy is that *the server
       implementor should fix it first*.

       If the server implementor has fixed it in the latest version, and
       can give us a complete description of the version strings that go
       with the bug, then we're happy to use those version strings as a
       trigger to automatically enable our workaround (assuming one is
       possible). We _won't_ accept requests to auto-enable workarounds
       for an open-ended set of version strings, such as `any version of
       FooServer, including future ones not yet released'.

       The aim of this policy is to encourage implementors to gradually
       converge on the actual standardised SSH protocol. If we enable
       people to continue violating the spec, by installing open-ended
       workarounds in PuTTY for bugs they're never going to fix, then we're
       contributing to an ecosystem in which everyone carries on having
       bugs and everyone else carries on having to work around them.

       An exception: if an SSH server is no longer maintained _at all_
       (e.g. the company that produced it has gone out of business), and
       every version of it that was ever released has a bug, then that's
       one situation in which we may be prepared to add a workaround rule
       that matches all versions of that software. (The aim is to stop
       implementors from continuing to release software with the bug - and
       if they're not releasing it _at all_ any more, then that's already
       done!)

       We do recognise that sometimes it will be difficult to get the
       server maintainer to fix a bug, or even to answer support requests
       at all. Or it might take them a very long time to get round to doing
       anything about it. We're not completely unwilling to compromise:
       we're prepared to add _manually enabled_ workarounds to PuTTY even
       for bugs that an implementation hasn't fixed yet. We just won't
       _automatically_ enable the workaround unless the server maintainer
       has also done their part.

   B.7 Support requests

       If you're trying to make PuTTY do something for you and it isn't
       working, but you're not sure whether it's a bug or not, then
       _please_ consider looking for help somewhere else. This is one of
       the most common types of mail the PuTTY team receives, and we simply
       don't have time to answer all the questions. Questions of this type
       include:

        -  If you want to do something with PuTTY but have no idea where to
           start, and reading the manual hasn't helped, try posting to a
           public forum and see if someone can explain it to you.

        -  If you have tried to do something with PuTTY but it hasn't
           worked, and you aren't sure whether it's a bug in PuTTY or a bug
           in your SSH server or simply that you're not doing it right,
           then try posting to some public forum and see if someone can
           solve your problem. Or try doing the same thing with a different
           SSH client and see if it works with that. Please do not report
           it as a PuTTY bug unless you are really sure it _is_ a bug in
           PuTTY.

        -  If someone else installed PuTTY for you, or you're using PuTTY
           on someone else's computer, try asking them for help first.
           They're more likely to understand how they installed it and what
           they expected you to use it for than we are.

        -  If you have successfully made a connection to your server and
           now need to know what to type at the server's command prompt,
           or other details of how to use the server-end software, talk to
           your server's system administrator. This is not the PuTTY team's
           problem. PuTTY is only a communications tool, like a telephone;
           if you can't speak the same language as the person at the other
           end of the phone, it isn't the telephone company's job to teach
           it to you.

       If you absolutely cannot get a support question answered any other
       way, you can try mailing it to us, but we can't guarantee to have
       time to answer it.

   B.8 Web server administration

       If the PuTTY web site is down (Connection Timed Out), please don't
       bother mailing us to tell us about it. Most of us read our e-mail on
       the same machines that host the web site, so if those machines are
       down then we will notice _before_ we read our e-mail. So there's no
       point telling us our servers are down.

       Of course, if the web site has some other error (Connection Refused,
       404 Not Found, 403 Forbidden, or something else) then we might _not_
       have noticed and it might still be worth telling us about it.

       If you want to report a problem with our web site, check that you're
       looking at our _real_ web site and not a mirror. The real web site
       is at `https://www.chiark.greenend.org.uk/~sgtatham/putty/'; if
       that's not where you're reading this, then don't report the problem
       to us until you've checked that it's really a problem with the
       main site. If it's only a problem with the mirror, you should try
       to contact the administrator of that mirror site first, and only
       contact us if that doesn't solve the problem (in case we need to
       remove the mirror from our list).

   B.9 Asking permission for things

       PuTTY is distributed under the MIT Licence (see appendix D for
       details). This means you can do almost _anything_ you like with our
       software, our source code, and our documentation. The only things
       you aren't allowed to do are to remove our copyright notices or the
       licence text itself, or to hold us legally responsible if something
       goes wrong.

       So if you want permission to include PuTTY on a magazine cover disk,
       or as part of a collection of useful software on a CD or a web site,
       then _permission is already granted_. You don't have to mail us and
       ask. Just go ahead and do it. We don't mind.

       (If you want to distribute PuTTY alongside your own application for
       use with that application, or if you want to distribute PuTTY within
       your own organisation, then we recommend, but do not insist, that
       you offer your own first-line technical support, to answer questions
       about the interaction of PuTTY with your environment. If your users
       mail us directly, we won't be able to tell them anything useful
       about your specific setup.)

       If you want to use parts of the PuTTY source code in another
       program, then it might be worth mailing us to talk about technical
       details, but if all you want is to ask permission then you don't
       need to bother. You already have permission.

       If you just want to link to our web site, just go ahead. (It's not
       clear that we _could_ stop you doing this, even if we wanted to!)

  B.10 Mirroring the PuTTY web site

       If you want to set up a mirror of the PuTTY website, go ahead and
       set one up. Please don't bother asking us for permission before
       setting up a mirror. You already have permission.

       If the mirror is in a country where we don't already have plenty
       of mirrors, we may be willing to add it to the list on our mirrors
       page. Read the guidelines on that page, make sure your mirror works,
       and email us the information listed at the bottom of the page.

       Note that we do not _promise_ to list your mirror: we get a lot of
       mirror notifications and yours may not happen to find its way to the
       top of the list.

       Also note that we link to all our mirror sites using the
       `rel="nofollow"' attribute. Running a PuTTY mirror is not intended
       to be a cheap way to gain search rankings.

       If you have technical questions about the process of mirroring, then
       you might want to mail us before setting up the mirror (see also the
       guidelines on the Mirrors page); but if you just want to ask for
       permission, you don't need to. You already have permission.

  B.11 Praise and compliments

       One of the most rewarding things about maintaining free software
       is getting e-mails that just say `thanks'. We are always happy to
       receive e-mails of this type.

       Regrettably we don't have time to answer them all in person. If you
       mail us a compliment and don't receive a reply, _please_ don't think
       we've ignored you. We did receive it and we were happy about it; we
       just didn't have time to tell you so personally.

       To everyone who's ever sent us praise and compliments, in the past
       and the future: _you're welcome_!

  B.12 E-mail address

       The actual address to mail is <putty@projects.tartarus.org>.

Appendix C: PPK file format
---------------------------

       This appendix documents the file format used by PuTTY to store
       private keys.

       In this appendix, binary data structures are described using data
       type representations such as `uint32', `string' and `mpint' as
       used in the SSH protocol standards themselves. These are defined
       authoritatively by RFC 4251 section 5, `Data Type Representations
       Used in the SSH Protocols'.

   C.1 Overview

       A PPK file stores a private key, and the corresponding public key.
       Both are contained in the same file.

       The file format can be completely unencrypted, or it can encrypt
       the private key. The _public_ key is stored in cleartext in both
       cases. (This enables PuTTY to send the public key to an SSH server
       to see whether it will accept it, and not bother prompting for the
       passphrase unless the server says yes.)

       When the key file is encrypted, the encryption key is derived from a
       passphrase. An encrypted PPK file is also tamper-proofed using a MAC
       (authentication code), also derived from the same passphrase. The
       MAC protects the encrypted private key data, but it also covers the
       cleartext parts of the file. So you can't edit the public half of
       the key without invalidating the MAC and causing the key file as a
       whole to become useless.

       This MAC protects the key file against active cryptographic attacks
       in which the public half of a key pair is modified in a controlled
       way that allows an attacker to deduce information about the private
       half from the resulting corrupted signatures. Any attempt to do
       that to a PPK file should be reliably caught by the MAC failing to
       validate.

       (Such an attack would only be useful if the key file was stored in a
       location where the attacker could modify it without also having full
       access to the process that you type passphrases into. But that's not
       impossible; for example, if your home directory was on a network
       file server, then the file server's administrator could access the
       key file but not processes on the client machine.)

       The MAC also covers the _comment_ on the key. This stops an attacker
       from swapping keys with each other and editing the comments to
       disguise the fact. As a consequence, PuTTYgen cannot edit the
       comment on a key unless you decrypt the key with your passphrase
       first.

       (The circumstances in which _that_ attack would be useful are even
       more restricted. One example might be that the different keys
       trigger specific actions on the server you're connecting to and one
       of those actions is more useful to the attacker than the other. But
       once you have a MAC at all, it's no extra effort to make it cover as
       much as possible, and usually sensible.)

   C.2 Outer layer

       The outer layer of a PPK file is text-based. The PuTTY tools will
       always use LF line termination when writing PPK files, but will
       tolerate CR+LF and CR-only on input.

       The first few lines identify it as a PPK, and give some initial data
       about what's stored in it and how. They look like this:

         PuTTY-User-Key-File-version: algorithm-name
         Encryption: encryption-type
         Comment: key-comment-string

       *version* is a decimal number giving the version number of the file
       format itself. The current file format version is 3.

       *algorithm-name* is the SSH protocol identifier for the public key
       algorithm that this key is used for (such as `ssh-dss' or `ecdsa-
       sha2-nistp384').

       *encryption-type* indicates whether this key is stored encrypted,
       and if so, by what method. Currently the only supported encryption
       types are `aes256-cbc' and `none'.

       *key-comment-string* is a free text field giving the comment. This
       can contain any byte values other than 13 and 10 (CR and LF).

       The next part of the file gives the public key. This is stored
       unencrypted but base64-encoded (RFC 4648), and is preceded by a
       header line saying how many lines of base64 data are shown, looking
       like this:

         Public-Lines: number-of-lines
         that many lines of base64 data

       The base64-encoded data in this blob is formatted in exactly the
       same way as an SSH public key sent over the wire in the SSH protocol
       itself. That is also the same format as the base64 data stored in
       OpenSSH's `authorized_keys' file, except that in a PPK file the
       base64 data is split across multiple lines. But if you remove the
       newlines from the middle of this section, the resulting base64 blob
       is in the right format to go in an `authorized_keys' line.

       If the key is encrypted (i.e. *encryption-type* is not `none'),
       then the next thing that appears is a sequence of lines specifying
       how the keys for encrypting the file are to be derived from the
       passphrase:

         Key-Derivation: argon2-flavour
         Argon2-Memory: decimal-integer
         Argon2-Passes: decimal-integer
         Argon2-Parallelism: decimal-integer
         Argon2-Salt: hex-string

       *argon2-flavour* is one of the identifiers `Argon2d', `Argon2i' or
       `Argon2id', all describing variants of the Argon2 password-hashing
       function.

       The three integer values are used as parameters for Argon2, which
       allows you to configure the amount of memory used (in Kbyte), the
       number of passes of the algorithm to run (to tune its running time),
       and the degree of parallelism required by the hash function. The
       salt is decoded into a sequence of binary bytes and used as an
       additional input to Argon2. (It is chosen randomly when the key file
       is written, so that a guessing attack can't be mounted in parallel
       against multiple key files.)

       The next part of the file gives the private key. This is base64-
       encoded in the same way:

         Private-Lines: number-of-lines
         that many lines of base64 data

       The binary data represented in this base64 blob may be encrypted,
       depending on the _encryption-type_ field in the key file header
       shown above:

        -  If *encryption-type* is `none', then this data is stored in
           plain text.

        -  If *encryption-type* is `aes256-cbc', then this data is
           encrypted using AES, with a 256-bit key length, in the CBC
           cipher mode. The key and initialisation vector are derived from
           the passphrase: see section C.4.

           In order to encrypt the private key data with AES, it must be
           a multiple of 16 bytes (the AES cipher block length). This
           is achieved by appending random padding to the data before
           encrypting it. When decoding it after decryption, the random
           data can be ignored: the internal structure of the data is
           enough to tell you when you've reached the end of the meaningful
           part.

       Unlike public keys, the binary encoding of private keys is not
       specified at all in the SSH standards. See section C.3 for details
       of the private key format for each key type supported by PuTTY.

       The final thing in the key file is the MAC:

         Private-MAC: hex-mac-data

       *hex-mac-data* is a hexadecimal-encoded value, 64 digits long (i.e.
       32 bytes), generated using the HMAC-SHA-256 algorithm with the
       following binary data as input:

        -  string: the *algorithm-name* header field.

        -  string: the *encryption-type* header field.

        -  string: the *key-comment-string* header field.

        -  string: the binary public key data, as decoded from the base64
           lines after the `Public-Lines' header.

        -  string: the plaintext of the binary private key data, as decoded
           from the base64 lines after the `Private-Lines' header. If that
           data was stored encrypted, then the decrypted version of it
           is used in this MAC preimage, _including_ the random padding
           mentioned above.

       The MAC key is derived from the passphrase: see section C.4.

   C.3 Private key encodings

       This section describes the private key format for each key type
       supported by PuTTY.

       Because the PPK format also contains the public key (and both public
       and private key are protected by the same MAC to ensure they can't
       be made inconsistent), there is no need for the private key section
       of the file to repeat data from the public section. So some of these
       formats are very short.

       In all cases, a decoding application can begin reading from the
       start of the decrypted private key data, and know when it has read
       all that it needs. This allows random padding after the meaningful
       data to be safely ignored.

 C.3.1 RSA

       RSA keys are stored using an *algorithm-name* of `ssh-rsa'. (Keys
       stored like this are also used by the updated RSA signature schemes
       that use hashes other than SHA-1.)

       The public key data has already provided the key modulus and the
       public encoding exponent. The private data stores:

        -  mpint: the private decoding exponent of the key.

        -  mpint: one prime factor _p_ of the key.

        -  mpint: the other prime factor _q_ of the key. (RSA keys stored
           in this format are expected to have exactly two prime factors.)

        -  mpint: the multiplicative inverse of _q_ modulo _p_.

 C.3.2 DSA

       DSA keys are stored using an *algorithm-name* of `ssh-dss'.

       The public key data has already provided the key parameters (the
       large prime _p_, the small prime _q_ and the group generator _g_),
       and the public key _y_. The private key stores:

        -  mpint: the private key _x_, which is the discrete logarithm of
           _y_ in the group generated by _g_ mod _p_.

 C.3.3 NIST elliptic-curve keys

       NIST elliptic-curve keys are stored using one of the following
       *algorithm-name* values, each corresponding to a different elliptic
       curve and key size:

        -  `ecdsa-sha2-nistp256'

        -  `ecdsa-sha2-nistp384'

        -  `ecdsa-sha2-nistp521'

       The public key data has already provided the public elliptic curve
       point. The private key stores:

        -  mpint: the private exponent, which is the discrete log of the
           public point.

 C.3.4 EdDSA elliptic-curve keys (Ed25519 and Ed448)

       EdDSA elliptic-curve keys are stored using one of the following
       *algorithm-name* values, each corresponding to a different elliptic
       curve and key size:

        -  `ssh-ed25519'

        -  `ssh-ed448'

       The public key data has already provided the public elliptic curve
       point. The private key stores:

        -  mpint: the private exponent, which is the discrete log of the
           public point.

   C.4 Key derivation

       When a key file is encrypted, there are three pieces of key material
       that need to be computed from the passphrase:

        -  the key for the symmetric cipher used to encrypt the private key

        -  the initialisation vector for that cipher encryption

        -  the key for the MAC.

       If *encryption-type* is `aes256-cbc', then the symmetric cipher key
       is 32 bytes long, and the initialisation vector is 16 bytes (one
       cipher block). The length of the MAC key is also chosen to be 32
       bytes.

       If *encryption-type* is `none', then all three of these pieces of
       data have zero length. (The MAC is still generated and checked in
       the key file format, but it has a zero-length key.)

       If the amount of key material required is not zero, then the
       passphrase is fed to the Argon2 key derivation function, in
       whichever mode is described in the `Key-Derivation' header in
       the key file, with parameters derived from the various `Argon2-
       _Parameter_:' headers.

       (If the key is unencrypted, then all those headers are omitted, and
       Argon2 is not run at all.)

       Argon2 takes two extra string inputs in addition to the passphrase
       and the salt: a secret key, and some `associated data'. In PPK's use
       of Argon2, these are both set to the empty string.

       The `tag length' parameter to Argon2 (i.e. the amount of data it
       is asked to output) is set to the sum of the lengths of all of the
       data items required, i.e. (cipher key length + IV length + MAC key
       length). The output data is interpreted as the concatenation of the
       cipher key, the IV and the MAC key, in that order.

       So, for `aes256-cbc', the tag length will be 32+16+32 = 80 bytes; of
       the 80 bytes of output data, the first 32 bytes are used as the 256-
       bit AES key, the next 16 as the CBC IV, and the final 32 bytes as
       the HMAC-SHA-256 key.

   C.5 Older versions of the PPK format

 C.5.1 Version 2

       PPK version 2 was used by PuTTY 0.52 to 0.74 inclusive.

       In PPK version 2, the MAC algorithm used was HMAC-SHA-1 (so the
       Private-MAC line contained only 40 hex digits).

       The `Key-Derivation:' header and all the `Argon2-_Parameter_:'
       headers were absent. Instead of using Argon2, the key material for
       encrypting the private blob was derived from the passphrase in a
       totally different way, as follows.

       The cipher key for `aes256-cbc' was constructed by generating two
       SHA-1 hashes, concatenating them, and taking the first 32 bytes of
       the result. (So you'd get all 20 bytes of the first hash output, and
       the first 12 of the second). Each hash preimage was as follows:

        -  uint32: a sequence number. This is 0 in the first hash, and 1 in
           the second. (The idea was to extend this mechanism to further
           hashes by continuing to increment the sequence number, if future
           changes required even longer keys.)

        -  the passphrase, without any prefix length field.

       In PPK v2, the CBC initialisation vector was all zeroes.

       The MAC key was 20 bytes long, and was a single SHA-1 hash of the
       following data:

        -  the fixed string `putty-private-key-file-mac-key', without any
           prefix length field.

        -  the passphrase, without any prefix length field. (If the key is
           stored unencrypted, the passphrase was taken to be the empty
           string for these purposes.)

 C.5.2 Version 1

       PPK version 1 was a badly designed format, only used during initial
       development, and not recommended for production use.

       PPK version 1 was never used by a released version of PuTTY. It was
       only emitted by some early development snapshots between version
       0.51 (which did not support SSH-2 public keys at all) and 0.52
       (which already used version 2 of this file format). I _hope_ there
       are no PPK v1 files in use anywhere. But just in case, the old badly
       designed format is documented here anyway.

       In PPK version 1, the input to the MAC does not include any of the
       header fields or the public key. It is simply the private key data
       (still in plaintext and including random padding), all by itself
       (without a wrapping string).

       PPK version 1 keys must therefore be rigorously validated after
       loading, to ensure that the public and private parts of the key were
       consistent with each other.

       PPK version 1 only supported the RSA and DSA key types. For RSA,
       this validation can be done using only the provided data (since the
       private key blob contains enough information to reconstruct the
       public values anyway). But for DSA, that isn't quite enough.

       Hence, PPK version 1 DSA keys extended the private data so that
       immediately after _x_ was stored an extra value:

        -  string: a SHA-1 hash of the public key data, whose preimage
           consists of

            -  string: the large prime _p_

            -  string: the small prime _q_

            -  string: the group generator _g_

       The idea was that checking this hash would verify that the key
       parameters had not been tampered with, and then the loading
       application could directly verify that _g_^_x_ = _y_.

       In an _unencrypted_ version 1 key file, the MAC is replaced by a
       plain SHA-1 hash of the private key data. This is indicated by the
       `Private-MAC:' header being replaced with `Private-Hash:' instead.

Appendix D: PuTTY Licence
-------------------------

       PuTTY is copyright 1997-2025 Simon Tatham.

       Portions copyright Robert de Bath, Joris van Rantwijk, Delian
       Delchev, Andreas Schultz, Jeroen Massar, Wez Furlong, Nicolas Barry,
       Justin Bradford, Ben Harris, Malcolm Smith, Ahmad Khalifa, Markus
       Kuhn, Colin Watson, Christopher Staite, Lorenz Diener, Christian
       Brabandt, Jeff Smith, Pavel Kryukov, Maxim Kuznetsov, Svyatoslav
       Kuzmich, Nico Williams, Viktor Dukhovni, Josh Dersch, Lars
       Brinkhoff, and CORE SDI S.A.

       Permission is hereby granted, free of charge, to any person
       obtaining a copy of this software and associated documentation files
       (the `Software'), to deal in the Software without restriction,
       including without limitation the rights to use, copy, modify, merge,
       publish, distribute, sublicense, and/or sell copies of the Software,
       and to permit persons to whom the Software is furnished to do so,
       subject to the following conditions:

       The above copyright notice and this permission notice shall be
       included in all copies or substantial portions of the Software.

       THE SOFTWARE IS PROVIDED `AS IS', WITHOUT WARRANTY OF ANY KIND,
       EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
       OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
       NONINFRINGEMENT. IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE
       FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
       CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
       WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

Appendix E: PuTTY hacking guide
-------------------------------

       This appendix lists a selection of the design principles applying
       to the PuTTY source code. If you are planning to send code
       contributions, you should read this first.

   E.1 Cross-OS portability

       Despite Windows being its main area of fame, PuTTY is no longer a
       Windows-only application suite. It has a working Unix port; a Mac
       port is in progress; more ports may or may not happen at a later
       date.

       Therefore, embedding Windows-specific code in core modules such as
       ssh.c is not acceptable. We went to great lengths to _remove_ all
       the Windows-specific stuff from our core modules, and to shift it
       out into Windows-specific modules. Adding large amounts of Windows-
       specific stuff in parts of the code that should be portable is
       almost guaranteed to make us reject a contribution.

       The PuTTY source base is divided into platform-specific modules
       and platform-generic modules. The Unix-specific modules are all in
       the `unix' subdirectory; the Windows-specific modules are in the
       `windows' subdirectory.

       All the modules in the main source directory and other
       subdirectories - notably _all_ of the code for the various back ends
       - are platform-generic. We want to keep them that way.

       This also means you should stick to the C semantics guaranteed by
       the C standard: try not to make assumptions about the precise size
       of basic types such as `int' and `long int'; don't use pointer casts
       to do endianness-dependent operations, and so on.

       (Even _within_ a platform front end you should still be careful of
       some of these portability issues. The Windows front end compiles on
       both 32- and 64-bit x86 and also Arm.)

       Our current choice of C standards version is _mostly_ C99. With a
       couple of exceptions, you can assume that C99 features are available
       (in particular <stdint.h>, <stdbool.h> and `inline'), but you
       shouldn't use things that are new in C11 (such as <uchar.h> or
       _Generic).

       The exceptions to that rule are due to the need for Visual Studio
       compatibility:

        -  Don't use variable-length arrays. Visual Studio doesn't support
           them even now that it's adopted the rest of C99. We use -Wvla
           when building with gcc and clang, to make it easier to avoid
           accidentally breaking that rule.

        -  For historical reasons, we still build with one older VS version
           which lacks <inttypes.h>. So that file is included centrally
           in `defs.h', and has a set of workaround definitions for the
           PRIx64-type macros we use. If you need to use another one
           of those macros, you need to add a workaround definition in
           `defs.h', and don't casually re-include <inttypes.h> anywhere
           else in the source file.

       Here are a few portability assumptions that we _do_ currently allow
       (because we'd already have to thoroughly vet the existing code if
       they ever needed to change, and it doesn't seem worth doing that
       unless we really have to):

        -  You can assume `int' is _at least_ 32 bits wide. (We've never
           tried to port PuTTY to a platform with 16-bit int, and it
           doesn't look likely to be necessary in future.)

        -  Similarly, you can assume `char' is exactly 8 bits. (Exceptions
           to that are even less likely to be relevant to us than short
           int.)

        -  You can assume that using `memset' to write zero bytes over a
           whole structure will have the effect of setting all its pointer
           fields to NULL. (The standard itself guarantees this for
           _integer_ fields, but not for pointers.)

        -  You can assume that `time_t' has POSIX semantics, i.e. that
           it represents an integer number of non-leap seconds since
           1970-01-01 00:00:00 UTC. (Times in this format are used in
           X authorisation, but we could work around that by carefully
           distinguishing local `time_t' from time values used in the wire
           protocol; but these semantics of `time_t' are also baked into
           the shared library API used by the GSSAPI authentication code,
           which would be much harder to change.)

        -  You can assume that the execution character encoding is a
           superset of the printable characters of ASCII. (In particular,
           it's fine to do arithmetic on a `char' value representing a
           Latin alphabetic character, without bothering to allow for
           EBCDIC or other non-consecutive encodings of the alphabet.)

       On the other hand, here are some particular things _not_ to assume:

        -  Don't assume anything about the _signedness_ of `char'. In
           particular, you _must_ cast `char' values to `unsigned char'
           before passing them to any <ctype.h> function (because those
           expect a non-negative character value, or EOF). If you need
           a particular signedness, explicitly specify `signed char' or
           `unsigned char', or use C99 int8_t or uint8_t.

        -  From past experience with MacOS, we're still a bit nervous about
           '\n' and '\r' potentially having unusual meanings on a given
           platform. So it's fine to say `\n' in a string you're passing to
           `printf', but in any context where those characters appear in a
           standardised wire protocol or a binary file format, they should
           be spelled '\012' and '\015' respectively.

   E.2 Multiple backends treated equally

       PuTTY is not an SSH client with some other stuff tacked on the side.
       PuTTY is a generic, multiple-backend, remote VT-terminal client
       which happens to support one backend which is larger, more popular
       and more useful than the rest. Any extra feature which can possibly
       be general across all backends should be so: localising features
       unnecessarily into the SSH back end is a design error. (For example,
       we had several code submissions for proxy support which worked by
       hacking ssh.c. Clearly this is completely wrong: the network.h
       abstraction is the place to put it, so that it will apply to all
       back ends equally, and indeed we eventually put it there after
       another contributor sent a better patch.)

       The rest of PuTTY should try to avoid knowing anything about
       specific back ends if at all possible. To support a feature which is
       only available in one network protocol, for example, the back end
       interface should be extended in a general manner such that _any_
       back end which is able to provide that feature can do so. If it so
       happens that only one back end actually does, that's just the way it
       is, but it shouldn't be relied upon by any code.

   E.3 Multiple sessions per process on some platforms

       Some ports of PuTTY - notably the in-progress Mac port - are
       constrained by the operating system to run as a single process
       potentially managing multiple sessions.

       Therefore, the platform-independent parts of PuTTY never use global
       variables to store per-session data. The global variables that do
       exist are tolerated because they are not specific to a particular
       login session. The random number state in sshrand.c, the timer list
       in timing.c and the queue of top-level callbacks in callback.c serve
       all sessions equally. But most data is specific to a particular
       network session, and is therefore stored in dynamically allocated
       data structures, and pointers to these structures are passed around
       between functions.

       Platform-specific code can reverse this decision if it likes. The
       Windows code, for historical reasons, stores most of its data as
       global variables. That's OK, because _on Windows_ we know there is
       only one session per PuTTY process, so it's safe to do that. But
       changes to the platform-independent code should avoid introducing
       global variables, unless they are genuinely cross-session.

   E.4 C, not C++

       PuTTY is written entirely in C, not in C++.

       We have made _some_ effort to make it easy to compile our code using
       a C++ compiler: notably, our `snew', `snewn' and `sresize' macros
       explicitly cast the return values of malloc and realloc to the
       target type. (This has type checking advantages even in C: it means
       you never accidentally allocate the wrong size piece of memory for
       the pointer type you're assigning it to. C++ friendliness is really
       a side benefit.)

       We want PuTTY to continue being pure C, at least in the platform-
       independent parts and the currently existing ports. Patches which
       switch the Makefiles to compile it as C++ and start using classes
       will not be accepted.

       The one exception: a port to a new platform may use languages other
       than C if they are necessary to code on that platform. If your
       favourite PDA has a GUI with a C++ API, then there's no way you can
       do a port of PuTTY without using C++, so go ahead and use it. But
       keep the C++ restricted to that platform's subdirectory; if your
       changes force the Unix or Windows ports to be compiled as C++, they
       will be unacceptable to us.

   E.5 Security-conscious coding

       PuTTY is a network application and a security application. Assume
       your code will end up being fed deliberately malicious data by
       attackers, and try to code in a way that makes it unlikely to be a
       security risk.

       In particular, try not to use fixed-size buffers for variable-size
       data such as strings received from the network (or even the user).
       We provide functions such as dupcat and dupprintf, which dynamically
       allocate buffers of the right size for the string they construct.
       Use these wherever possible.

   E.6 Independence of specific compiler

       Windows PuTTY can currently be compiled with any of three Windows
       compilers: MS Visual C, the Cygwin / mingw32 GNU tools, and clang
       (in MS compatibility mode).

       This is a really useful property of PuTTY, because it means people
       who want to contribute to the coding don't depend on having a
       specific compiler; so they don't have to fork out money for MSVC if
       they don't already have it, but on the other hand if they _do_ have
       it they also don't have to spend effort installing gcc alongside it.
       They can use whichever compiler they happen to have available, or
       install whichever is cheapest and easiest if they don't have one.

       Therefore, we don't want PuTTY to start depending on which compiler
       you're using. Using GNU extensions to the C language, for example,
       would ruin this useful property (not that anyone's ever tried
       it!); and more realistically, depending on an MS-specific library
       function supplied by the MSVC C library (_snprintf, for example)
       is a mistake, because that function won't be available under the
       other compilers. Any function supplied in an official Windows DLL
       as part of the Windows API is fine, and anything defined in the C
       library standard is also fine, because those should be available
       irrespective of compilation environment. But things in between,
       available as non-standard library and language extensions in only
       one compiler, are disallowed.

       (_snprintf in particular should be unnecessary, since we provide
       dupprintf; see section E.5.)

       Compiler independence should apply on all platforms, of course, not
       just on Windows.

   E.7 Small code size

       PuTTY is tiny, compared to many other Windows applications. And
       it's easy to install: it depends on no DLLs, no other applications,
       no service packs or system upgrades. It's just one executable. You
       install that executable wherever you want to, and run it.

       We want to keep both these properties - the small size, and the ease
       of installation - if at all possible. So code contributions that
       depend critically on external DLLs, or that add a huge amount to the
       code size for a feature which is only useful to a small minority of
       users, are likely to be thrown out immediately.

       We do vaguely intend to introduce a DLL plugin interface for PuTTY,
       whereby seriously large extra features can be implemented in plugin
       modules. The important thing, though, is that those DLLs will be
       _optional_; if PuTTY can't find them on startup, it should run
       perfectly happily and just won't provide those particular features.
       A full installation of PuTTY might one day contain ten or twenty
       little DLL plugins, which would cut down a little on the ease of
       installation - but if you really needed ease of installation you
       _could_ still just install the one PuTTY binary, or just the DLLs
       you really needed, and it would still work fine.

       Depending on _external_ DLLs is something we'd like to avoid if
       at all possible (though for some purposes, such as complex SSH
       authentication mechanisms, it may be unavoidable). If it can't be
       avoided, the important thing is to follow the same principle of
       graceful degradation: if a DLL can't be found, then PuTTY should run
       happily and just not supply the feature that depended on it.

   E.8 Single-threaded code

       PuTTY and its supporting tools, or at least the vast majority of
       them, run in only one OS thread.

       This means that if you're devising some piece of internal mechanism,
       there's no need to use locks to make sure it doesn't get called by
       two threads at once. The only way code can be called re-entrantly is
       by recursion.

       That said, most of Windows PuTTY's network handling is triggered
       off Windows messages requested by WSAAsyncSelect(), so if you call
       MessageBox() deep within some network event handling code you should
       be aware that you might be re-entered if a network event comes in
       and is passed on to our window procedure by the MessageBox() message
       loop.

       Also, the front ends can use multiple threads if they like. For
       example, the Windows front-end code spawns subthreads to deal with
       bidirectional blocking I/O on non-network streams such as Windows
       pipes. However, it keeps tight control of its auxiliary threads, and
       uses them only for that one purpose, as a form of select(). Pretty
       much all the code outside windows/handle-io.c is _only_ ever called
       from the one primary thread; the others just loop round blocking
       on file handles, and signal the main thread (via Windows event
       objects) when some real work needs doing. This is not considered a
       portability hazard because that code is already Windows-specific and
       needs rewriting on other platforms.

       One important consequence of this: PuTTY has only one thread in
       which to do everything. That `everything' may include managing
       more than one login session (section E.3), managing multiple data
       channels within an SSH session, responding to GUI events even when
       nothing is happening on the network, and responding to network
       requests from the server (such as repeat key exchange) even when the
       program is dealing with complex user interaction such as the re-
       configuration dialog box. This means that _almost none_ of the PuTTY
       code can safely block.

   E.9 Keystrokes sent to the server wherever possible

       In almost all cases, PuTTY sends keystrokes to the server. Even
       weird keystrokes that you think should be hot keys controlling
       PuTTY. Even Alt-F4 or Alt-Space, for example. If a keystroke has a
       well-defined escape sequence that it could usefully be sending to
       the server, then it should do so, or at the very least it should be
       configurably able to do so.

       To unconditionally turn a key combination into a hot key to control
       PuTTY is almost always a design error. If a hot key is really truly
       required, then try to find a key combination for it which _isn't_
       already used in existing PuTTYs (either it sends nothing to the
       server, or it sends the same thing as some other combination).
       Even then, be prepared for the possibility that one day that key
       combination might end up being needed to send something to the
       server - so make sure that there's an alternative way to invoke
       whatever PuTTY feature it controls.

  E.10 640x480 friendliness in configuration panels

       There's a reason we have lots of tiny configuration panels instead
       of a few huge ones, and that reason is that not everyone has a
       1600x1200 desktop. 640x480 is still a viable resolution for running
       Windows (and indeed it's still the default if you start up in safe
       mode), so it's still a resolution we care about.

       Accordingly, the PuTTY configuration box, and the PuTTYgen control
       window, are deliberately kept just small enough to fit comfortably
       on a 640x480 display. If you're adding controls to either of these
       boxes and you find yourself wanting to increase the size of the
       whole box, _don't_. Split it into more panels instead.

  E.11 Coroutines in protocol code

       Large parts of the code in modules implementing wire protocols
       (mainly SSH) are structured using a set of macros that implement
       (something close to) Donald Knuth's `coroutines' concept in C.

       Essentially, the purpose of these macros are to arrange that a
       function can call crReturn() to return to its caller, and the next
       time it is called control will resume from just after that crReturn
       statement.

       This means that any local (automatic) variables declared in such a
       function will be corrupted every time you call crReturn. If you need
       a variable to persist for longer than that, you _must_ make it a
       field in some appropriate structure containing the persistent state
       of the coroutine - typically the main state structure for a protocol
       layer.

       See `https://www.chiark.greenend.org.uk/~sgtatham/coroutines.html'
       for a more in-depth discussion of what these macros are for and how
       they work.

       Another caveat: most of these coroutines are not _guaranteed_ to run
       to completion, because the SSH connection (or whatever) that they're
       part of might be interrupted at any time by an unexpected network
       event or user action. So whenever a coroutine-managed variable
       refers to a resource that needs releasing, you should also ensure
       that the cleanup function for its containing state structure can
       reliably release it even if the coroutine is aborted at an arbitrary
       point.

       For example, if an SSH packet protocol layer has to have a field
       that sometimes points to a piece of allocated memory, then you
       should ensure that when you free that memory you reset the pointer
       field to NULL. Then, no matter when the protocol layer's cleanup
       function is called, it can reliably free the memory if there is any,
       and not crash if there isn't.

  E.12 Explicit vtable structures to implement traits

       A lot of PuTTY's code is written in a style that looks structurally
       rather like an object-oriented language, in spite of PuTTY being a
       pure C program.

       For example, there's a single data type called ssh_hash, which is
       an abstraction of a secure hash function, and a bunch of functions
       called things like ssh_hash__foo_ that do things with those data
       types. But in fact, PuTTY supports many different hash functions,
       and each one has to provide its own implementation of those
       functions.

       In C++ terms, this is rather like having a single abstract base
       class, and multiple concrete subclasses of it, each of which fills
       in all the pure virtual methods in a way that's compatible with the
       data fields of the subclass. The implementation is more or less the
       same, as well: in C, we do explicitly in the source code what the
       C++ compiler will be doing behind the scenes at compile time.

       But perhaps a closer analogy in functional terms is the Rust concept
       of a `trait', or the Java idea of an `interface'. C++ supports a
       multi-level hierarchy of inheritance, whereas PuTTY's system - like
       traits or interfaces - has only two levels, one describing a generic
       object of a type (e.g. a hash function) and another describing a
       specific implementation of that type (e.g. SHA-256).

       The PuTTY code base has a standard idiom for doing this in C, as
       follows.

       Firstly, we define two struct types for our trait. One of them
       describes a particular _kind_ of implementation of that trait,
       and it's full of (mostly) function pointers. The other describes
       a specific _instance_ of an implementation of that trait, and it
       will contain a pointer to a const instance of the first type. For
       example:

         typedef struct MyAbstraction MyAbstraction;
         typedef struct MyAbstractionVtable MyAbstractionVtable;
         
         struct MyAbstractionVtable {
             MyAbstraction *(*new)(const MyAbstractionVtable *vt);
             void (*free)(MyAbstraction *);
             void (*modify)(MyAbstraction *, unsigned some_parameter);
             unsigned (*query)(MyAbstraction *, unsigned some_parameter);
         };
         
         struct MyAbstraction {
             const MyAbstractionVtable *vt;
         };

       Here, we imagine that MyAbstraction might be some kind of object
       that contains mutable state. The associated vtable structure shows
       what operations you can perform on a MyAbstraction: you can create
       one (dynamically allocated), free one you already have, or call the
       example methods `modify' (to change the state of the object in some
       way) and `query' (to return some value derived from the object's
       current state).

       (In most cases, the vtable structure has a name ending in `vtable'.
       But for historical reasons a lot of the crypto primitives that
       use this scheme - ciphers, hash functions, public key methods and
       so on - instead have names ending in `alg', on the basis that the
       primitives they implement are often referred to as `encryption
       algorithms', `hash algorithms' and so forth.)

       Now, to define a concrete instance of this trait, you'd define a
       struct that contains a MyAbstraction field, plus any other data it
       might need:

         struct MyImplementation {
             unsigned internal_data[16];
             SomeOtherType *dynamic_subthing;
         
             MyAbstraction myabs;
         };

       Next, you'd implement all the necessary methods for that
       implementation of the trait, in this kind of style:

         static MyAbstraction *myimpl_new(const MyAbstractionVtable *vt)
         {
             MyImplementation *impl = snew(MyImplementation);
             memset(impl, 0, sizeof(*impl));
             impl->dynamic_subthing = allocate_some_other_type();
             impl->myabs.vt = vt;
             return &impl->myabs;
         }
         
         static void myimpl_free(MyAbstraction *myabs)
         {
             MyImplementation *impl = container_of(myabs, MyImplementation, myabs);
             free_other_type(impl->dynamic_subthing);
             sfree(impl);
         }
         
         static void myimpl_modify(MyAbstraction *myabs, unsigned param)
         {
             MyImplementation *impl = container_of(myabs, MyImplementation, myabs);
             impl->internal_data[param] += do_something_with(impl->dynamic_subthing);
         }
         
         static unsigned myimpl_query(MyAbstraction *myabs, unsigned param)
         {
             MyImplementation *impl = container_of(myabs, MyImplementation, myabs);
             return impl->internal_data[param];
         }

       Having defined those methods, now we can define a const instance of
       the vtable structure containing pointers to them:

         const MyAbstractionVtable MyImplementation_vt = {
             .new = myimpl_new,
             .free = myimpl_free,
             .modify = myimpl_modify,
             .query = myimpl_query,
         };

       _In principle_, this is all you need. Client code can construct a
       new instance of a particular implementation of MyAbstraction by
       digging out the new method from the vtable and calling it (with
       the vtable itself as a parameter), which returns a MyAbstraction *
       pointer that identifies a newly created instance, in which the vt
       field will contain a pointer to the same vtable structure you passed
       in. And once you have an instance object, say MyAbstraction *myabs,
       you can dig out one of the other method pointers from the vtable it
       points to, and call that, passing the object itself as a parameter.

       But in fact, we don't do that, because it looks pretty ugly at all
       the call sites. Instead, what we generally do in this code base is
       to write a set of static inline wrapper functions in the same header
       file that defined the MyAbstraction structure types, like this:

         static inline MyAbstraction *myabs_new(const MyAbstractionVtable *vt)
         { return vt->new(vt); }
         static inline void myabs_free(MyAbstraction *myabs)
         { myabs->vt->free(myabs); }
         static inline void myimpl_modify(MyAbstraction *myabs, unsigned param)
         { myabs->vt->modify(myabs, param); }
         static inline unsigned myimpl_query(MyAbstraction *myabs, unsigned param)
         { return myabs->vt->query(myabs, param); }

       And now call sites can use those reasonably clean-looking wrapper
       functions, and shouldn't ever have to directly refer to the vt field
       inside any myabs object they're holding. For example, you might
       write something like this:

         MyAbstraction *myabs = myabs_new(&MyImplementation_vtable);
         myabs_update(myabs, 10);
         unsigned output = myabs_query(myabs, 2);
         myabs_free(myabs);

       and then all this code can use a different implementation of the
       same abstraction by just changing which vtable pointer it passed in
       in the first line.

       Some things to note about this system:

        -  The implementation instance type (here `MyImplementation'
           contains the abstraction type (`MyAbstraction') as one of its
           fields. But that field is not necessarily at the start of the
           structure. So you can't just _cast_ pointers back and forth
           between the two types. Instead:

            -  You `up-cast' from implementation to abstraction by taking
               the address of the MyAbstraction field. You can see the
               example new method above doing this, returning &impl->myabs.
               All new methods do this on return.

            -  Going in the other direction, each method that was
               passed a generic MyAbstraction *myabs parameter has to
               recover a pointer to the specific implementation type
               MyImplementation *impl. The idiom for doing that is to use
               the `container_of' macro, also seen in the Linux kernel
               code. Generally, container_of(p, Type, field) says: `I'm
               confident that the pointer value `p' is pointing to the
               field called `field' within a larger struct of type Type.
               Please return me the pointer to the containing structure.'
               So in this case, we take the `myabs' pointer passed to the
               function, and `down-cast' it into a pointer to the larger
               and more specific structure type MyImplementation, by
               adjusting the pointer value based on the offset within that
               structure of the field called `myabs'.

           This system is flexible enough to permit `multiple inheritance',
           or rather, multiple _implementation_: having one object type
           implement more than one trait. For example, the ProxySocket
           type implements both the Socket trait and the Plug trait that
           connects to it, because it has to act as an adapter between
           another instance of each of those types.

           It's also perfectly possible to have the same object implement
           the _same_ trait in two different ways. At the time of writing
           this I can't think of any case where we actually do this, but a
           theoretical example might be if you needed to support a trait
           like Comparable in two ways that sorted by different criteria.
           There would be no difficulty doing this in the PuTTY system:
           simply have your implementation struct contain two (or more)
           fields of the same abstraction type. The fields will have
           different names, which makes it easy to explicitly specify which
           one you're returning a pointer to during up-casting, or which
           one you're down-casting from using container_of. And then both
           sets of implementation methods can recover a pointer to the same
           containing structure.

        -  Unlike in C++, all objects in PuTTY that use this system are
           dynamically allocated. The `constructor' functions (whether
           they're virtualised across the whole abstraction or specific to
           each implementation) always allocate memory and return a pointer
           to it. The `free' method (our analogue of a destructor) always
           expects the input pointer to be dynamically allocated, and frees
           it. As a result, client code doesn't need to know how large
           the implementing object type is, because it will never need to
           allocate it (on the stack or anywhere else).

        -  Unlike in C++, the abstraction's `vtable' structure does not
           only hold methods that you can call on an instance object. It
           can also hold several other kinds of thing:

            -  Methods that you can call _without_ an instance object,
               given only the vtable structure identifying a particular
               implementation of the trait. You might think of these as
               `static methods', as in C++, except that they're _virtual_
               - the same code can call the static method of a different
               `class' given a different vtable pointer. So they're more
               like `virtual static methods', which is a concept C++
               doesn't have. An example is the pubkey_bits method in
               ssh_keyalg.

            -  The most important case of a `virtual static method' is the
               new method that allocates and returns a new object. You can
               think of it as a `virtual constructor' - another concept C++
               doesn't have. (However, not all types need one of these: see
               below.)

            -  The vtable can also contain constant data relevant to the
               class as a whole - `virtual constant data'. For example, a
               cryptographic hash function will contain an integer field
               giving the length of the output hash, and most crypto
               primitives will contain a string field giving the identifier
               used in the SSH protocol that describes that primitive.

           The effect of all of this is that you can make other pieces of
           code able to use any instance of one of these types, by passing
           it an actual vtable as a parameter. For example, the hash_simple
           function takes an ssh_hashalg vtable pointer specifying any
           hash algorithm you like, and internally, it creates an object
           of that type, uses it, and frees it. In C++, you'd probably
           do this using a template, which would mean you had multiple
           specialisations of hash_simple - and then it would be much more
           difficult to decide _at run time_ which one you needed to use.
           Here, hash_simple is still just one function, and you can decide
           as late as you like which vtable to pass to it.

        -  The abstract _instance_ structure can also contain publicly
           visible data fields (this time, usually treated as mutable)
           which are common to all implementations of the trait. For
           example, BinaryPacketProtocol has lots of these.

        -  Not all abstractions of this kind want virtual constructors. It
           depends on how different the implementations are.

           With a crypto primitive like a hash algorithm, the constructor
           call looks the same for every implementing type, so it makes
           sense to have a standardised virtual constructor in the
           vtable and a ssh_hash_new wrapper function which can make an
           instance of whatever vtable you pass it. And then you make
           all the vtable objects themselves globally visible throughout
           the source code, so that any module can call (for example)
           ssh_hash_new(&ssh_sha256).

           But with other kinds of object, the constructor for each
           implementing type has to take a different set of parameters.
           For example, implementations of Socket are not generally
           interchangeable at construction time, because constructing
           different kinds of socket require totally different kinds of
           address parameter. In that situation, it makes more sense to
           keep the vtable structure itself private to the implementing
           source file, and instead, publish an ordinary constructing
           function that allocates and returns an instance of that
           particular subtype, taking whatever parameters are appropriate
           to that subtype.

        -  If you do have virtual constructors, you can choose whether
           they take a vtable pointer as a parameter (as shown above), or
           an _existing_ instance object. In the latter case, they can
           refer to the object itself as well as the vtable. For example,
           you could have a trait come with a virtual constructor called
           `clone', meaning `Make a copy of this object, no matter which
           implementation it is.'

        -  Sometimes, a single vtable structure type can be shared
           between two completely different object types, and contain
           all the methods for both. For example, ssh_compression_alg
           contains methods to create, use and free ssh_compressor and
           ssh_decompressor objects, which are not interchangeable - but
           putting their methods in the same vtable means that it's easy to
           create a matching pair of objects that are compatible with each
           other.

        -  Passing the vtable itself as an argument to the new method is
           not compulsory: if a given new implementation is only used by
           a single vtable, then that function can simply hard-code the
           vtable pointer that it writes into the object it constructs.
           But passing the vtable is more flexible, because it allows
           a single constructor function to be shared between multiple
           slightly different object types. For example, SHA-384 and SHA-
           512 share the same new method and the same implementation data
           type, because they're very nearly the same hash algorithm - but
           a couple of the other methods in their vtables are different,
           because the `reset' function has to set up the initial algorithm
           state differently, and the `digest' method has to write out a
           different amount of data.

           One practical advantage of having the myabs__foo_ family of
           inline wrapper functions in the header file is that if you
           change your mind later about whether the vtable needs to be
           passed to new, you only have to update the myabs_new wrapper,
           and then the existing call sites won't need changing.

        -  Another piece of `stunt object orientation' made possible by
           this scheme is that you can write two vtables that both use the
           same structure layout for the implementation object, and have
           an object _transform from one to the other_ part way through
           its lifetime, by overwriting its own vtable pointer field. For
           example, the sesschan type that handles the server side of an
           SSH terminal session will sometimes transform in mid-lifetime
           into an SCP or SFTP file-transfer channel in this way, at the
           point where the client sends an `exec' or `subsystem' request
           that indicates that that's what it wants to do with the channel.

           This concept would be difficult to arrange in C++. In Rust,
           it wouldn't even _make sense_, because in Rust, objects
           implementing a trait don't even contain a vtable pointer at
           all - instead, the `trait object' type (identifying a specific
           instance of some implementation of a given trait) consists of
           a pair of pointers, one to the object itself and one to the
           vtable. In that model, the only way you could make an existing
           object turn into a different trait would be to know where all
           the pointers to it were stored elsewhere in the program, and
           persuade all their owners to rewrite them.

        -  Another stunt you can do is to have a vtable that doesn't have
           a corresponding implementation structure at all, because the
           only methods implemented in it are the constructors, and they
           always end up returning an implementation of some other vtable.
           For example, some of PuTTY's crypto primitives have a hardware-
           accelerated version and a pure software version, and decide at
           run time which one to use (based on whether the CPU they're
           running on supports the necessary acceleration instructions).
           So, for example, there are vtables for ssh_sha256_sw and
           ssh_sha256_hw, each of which has its own data layout and its own
           implementations of all the methods; and then there's a top-level
           vtable ssh_sha256, which only provides the `new' method, and
           implements it by calling the `new' method on one or other of the
           subtypes depending on what it finds out about the machine it's
           running on. That top-level selector vtable is nearly always the
           one used by client code. (Except for the test suite, which has
           to instantiate both of the subtypes in order to make sure they
           both pass the tests.)

           As a result, the top-level selector vtable ssh_sha256 doesn't
           need to implement any method that takes an ssh_cipher *
           parameter, because no ssh_cipher object is ever constructed
           whose vt field points to &ssh_sha256: they all point to one of
           the other two full implementation vtables.

  E.13 Do as we say, not as we do

       The current PuTTY code probably does not conform strictly to _all_
       of the principles listed above. There may be the occasional SSH-
       specific piece of code in what should be a backend-independent
       module, or the occasional dependence on a non-standard X library
       function under Unix.

       This should not be taken as a licence to go ahead and violate the
       rules. Where we violate them ourselves, we're not happy about it,
       and we would welcome patches that fix any existing problems. Please
       try to help us make our code better, not worse!

Appendix F: PuTTY download keys and signatures
----------------------------------------------

       We create GPG signatures for all the PuTTY files distributed from
       our web site, so that users can be confident that the files have not
       been tampered with. Here we identify our public keys, and explain
       our signature policy so you can have an accurate idea of what each
       signature guarantees. This description is provided as both a web
       page on the PuTTY site, and an appendix in the PuTTY manual.

       As of release 0.58, all of the PuTTY executables contain fingerprint
       material (usually accessed via the `-pgpfp' command-line option),
       such that if you have an executable you trust, you can use it to
       establish a trust path, for instance to a newer version downloaded
       from the Internet.

       As of release 0.67, the Windows executables and installer also
       contain built-in signatures that are automatically verified by
       Windows' own mechanism (`Authenticode'). The keys used for that are
       different, and are not covered here.

       See question A.9.18 in the FAQ for some gotchas when verifying
       checksums and signatures.

       (Note that none of the keys, signatures, etc mentioned here have
       anything to do with keys used with SSH - they are purely for
       verifying the origin of files distributed by the PuTTY team.)

   F.1 Public keys

       We maintain multiple keys, stored with different levels of security
       due to being used in different ways. See section F.2 below for
       details.

       The keys we provide are:

       Snapshot Key

           Used to sign routine development builds of PuTTY: nightly
           snapshots, pre-releases, and sometimes also custom diagnostic
           builds we send to particular users.

       Release Key

           Used to sign manually released versions of PuTTY.

       Secure Contact Key

           An encryption-capable key suitable for people to send
           confidential messages to the PuTTY team, e.g. reports of
           vulnerabilities.

       Master Key

           Used to tie all the above keys into the GPG web of trust. The
           Master Key signs all the other keys, and other GPG users have
           signed it in turn.

       The current issue of those keys are available for download from the
       PuTTY website, and are also available on PGP keyservers using the
       key IDs listed below.

       *Master Key* (2023)

           RSA, 4096-bit. Key ID: B15D9EFC216B06A1. Fingerprint:
           28D4 7C46 55E7 65A6 D827 AC66 B15D 9EFC 216B 06A1

       *Release Key* (2023)

           RSA, 3072-bit. Key ID: 1993D21BCAD1AA77. Fingerprint:
           F412 BA3A A30F DC0E 77B4 E387 1993 D21B CAD1 AA77

       *Snapshot Key* (2023)

           RSA, 3072-bit. Key ID: 10625E553F53FAAD. Fingerprint:
           74CC 6DD9 ABA7 31D4 C5A0 C2D0 1062 5E55 3F53 FAAD

       *Secure Contact Key* (2023)

           RSA, 3072-bit. Key ID: 1559F6A8929F5EFC. Fingerprint:
           01F5 A2B1 1388 D64B 707F 897F 1559 F6A8 929F 5EFC

   F.2 Security details

       The various keys have various different security levels. This
       section explains what those security levels are, and how far you can
       expect to trust each key.

 F.2.1 The Development Snapshots key

       The Development Snapshots private key is stored _without a
       passphrase_. This is necessary, because the snapshots are generated
       every night without human intervention, so nobody would be able to
       type a passphrase.

       The snapshots are built and signed on a team member's home
       computers, before being uploaded to the web server from which you
       download them.

       Therefore, a signature from the Development Snapshots key _DOES_
       protect you against:

        -  People tampering with the PuTTY binaries between the PuTTY web
           site and you.

        -  The maintainers of our web server attempting to abuse their root
           privilege to tamper with the binaries.

       But it _DOES NOT_ protect you against:

        -  People tampering with the binaries before they are uploaded to
           our download servers.

        -  People tampering with the build machines so that the next set of
           binaries they build will be malicious in some way.

        -  People stealing the unencrypted private key from the build
           machine it lives on.

       Of course, we take all reasonable precautions to guard the build
       machines. But when you see a signature, you should always be certain
       of precisely what it guarantees and precisely what it does not.

 F.2.2 The Releases key

       The Releases key is more secure: because it is only used at release
       time, to sign each release by hand, we can store it encrypted.

       The Releases private key is kept encrypted on the developers' own
       local machines. So an attacker wanting to steal it would have to
       also steal the passphrase.

 F.2.3 The Secure Contact Key

       The Secure Contact Key is stored with a similar level of security to
       the Release Key: it is stored with a passphrase, and no automated
       script has access to it.

 F.2.4 The Master Keys

       The Master Key signs almost nothing. Its purpose is to bind the
       other keys together and certify that they are all owned by the same
       people and part of the same integrated setup. The only signatures
       produced by the Master Key, _ever_, should be the signatures on the
       other keys.

       The Master Key is especially long, and its private key and
       passphrase are stored with special care.

       We have collected some third-party signatures on the Master Key, in
       order to increase the chances that you can find a suitable trust
       path to them.

       We have uploaded our various keys to public keyservers, so that even
       if you don't know any of the people who have signed our keys, you
       can still be reasonably confident that an attacker would find it
       hard to substitute fake keys on all the public keyservers at once.

   F.3 Key rollover

       Our current keys were generated in July 2023.

       Each new Master Key is signed with the old one, to show that it
       really is owned by the same people and not substituted by an
       attacker.

       Each new Master Key also signs the previous Release Keys, in case
       you're trying to verify the signatures on a release prior to the
       rollover and can find a chain of trust to those keys from any of the
       people who have signed our new Master Key.

       Each release is signed with the Release Key that was current at the
       time of release. We don't go back and re-sign old releases with
       newly generated keys.

       The details of all previous keys are given here.

       *Keys generated in the 2021 rollover*

       *Master Key* (2021)

           RSA, 3072-bit. Key ID: DD4355EAAC1119DE. Fingerprint:
           A872 D42F 1660 890F 0E05 223E DD43 55EA AC11 19DE

       *Release Key* (2021)

           RSA, 3072-bit. Key ID: E4F83EA2AA4915EC. Fingerprint:
           2CF6 134B D3F7 7A65 88EB D668 E4F8 3EA2 AA49 15EC

       *Snapshot Key* (2021)

           RSA, 3072-bit. Key ID: B43979F89F446CFD. Fingerprint:
           1FD3 BCAC E532 FBE0 6A8C 09E2 B439 79F8 9F44 6CFD

       *Secure Contact Key* (2021)

           RSA, 3072-bit. Key ID: 012C59D4211BD62A. Fingerprint:
           E30F 1354 2A04 BE0E 56F0 5801 012C 59D4 211B D62A

       *Keys generated in the 2018 rollover*

       *Master Key* (2018)

           RSA, 4096-bit. Key ID: 76BC7FE4EBFD2D9E. Fingerprint:
           24E1 B1C5 75EA 3C9F F752  A922 76BC 7FE4 EBFD 2D9E

       *Release Key* (2018)

           RSA, 3072-bit. Key ID: 6289A25F4AE8DA82. Fingerprint:
           E273 94AC A3F9 D904 9522  E054 6289 A25F 4AE8 DA82

       *Snapshot Key* (2018)

           RSA, 3072-bit. Key ID: 38BA7229B7588FD1. Fingerprint:
           C92B 52E9 9AB6 1DDA 33DB  2B7A 38BA 7229 B758 8FD1

       *Secure Contact Key* (2018)

           RSA, 3072-bit. Key ID: 657D487977F95C98. Fingerprint:
           A680 0082 2998 6E46 22CA  0E43 657D 4879 77F9 5C98

       *Key generated in 2016* (when we first introduced the Secure Contact
       Key)

       *Secure Contact Key* (2016)

           RSA, 2048-bit. Main key ID: 2048R/8A0AF00B (long version:
           2048R/C4FCAAD08A0AF00B). Encryption subkey ID: 2048R/50C2CF5C
           (long version: 2048R/9EB39CC150C2CF5C). Fingerprint:
           8A26 250E 763F E359 75F3  118F C4FC AAD0 8A0A F00B

       *Keys generated in the 2015 rollover*

       *Master Key* (2015)

           RSA, 4096-bit. Key ID: 4096R/04676F7C (long
           version: 4096R/AB585DC604676F7C). Fingerprint:
           440D E3B5 B7A1 CA85 B3CC  1718 AB58 5DC6 0467 6F7C

       *Release Key* (2015)

           RSA, 2048-bit. Key ID: 2048R/B43434E4 (long
           version: 2048R/9DFE2648B43434E4). Fingerprint:
           0054 DDAA 8ADA 15D2 768A  6DE7 9DFE 2648 B434 34E4

       *Snapshot Key* (2015)

           RSA, 2048-bit. Key ID: 2048R/D15F7E8A (long
           version: 2048R/EEF20295D15F7E8A). Fingerprint:
           0A3B 0048 FE49 9B67 A234  FEB6 EEF2 0295 D15F 7E8A

       *Original keys generated in 2000* (two sets, RSA and DSA)

       *Master Key* (original RSA)

           RSA, 1024-bit. Key ID: 1024R/1E34AC41 (long
           version: 1024R/9D5877BF1E34AC41). Fingerprint:
           8F 15 97 DA 25 30 AB 0D  88 D1 92 54 11 CF 0C 4C

       *Master Key* (original DSA)

           DSA, 1024-bit. Key ID: 1024D/6A93B34E (long
           version: 1024D/4F5E6DF56A93B34E). Fingerprint:
           313C 3E76 4B74 C2C5 F2AE  83A8 4F5E 6DF5 6A93 B34E

       *Release Key* (original RSA)

           RSA, 1024-bit. Key ID: 1024R/B41CAE29 (long
           version: 1024R/EF39CCC0B41CAE29). Fingerprint:
           AE 65 D3 F7 85 D3 18 E0  3B 0C 9B 02 FF 3A 81 FE

       *Release Key* (original DSA)

           DSA, 1024-bit. Key ID: 1024D/08B0A90B (long
           version: 1024D/FECD6F3F08B0A90B). Fingerprint:
           00B1 1009 38E6 9800 6518  F0AB FECD 6F3F 08B0 A90B

       *Snapshot Key* (original RSA)

           RSA, 1024-bit. Key ID: 1024R/32B903A9 (long
           version: 1024R/FAAED21532B903A9). Fingerprint:
           86 8B 1F 79 9C F4 7F BD  8B 1B D7 8E C6 4E 4C 03

       *Snapshot Key* (original DSA)

           DSA, 1024-bit. Key ID: 1024D/7D3E4A00 (long
           version: 1024D/165E56F77D3E4A00). Fingerprint:
           63DD 8EF8 32F5 D777 9FF0  2947 165E 56F7 7D3E 4A00

Appendix G: SSH-2 names specified for PuTTY
-------------------------------------------

       There are various parts of the SSH-2 protocol where things
       are specified using a textual name. Names ending in
       @putty.projects.tartarus.org are reserved for allocation by the
       PuTTY team. Allocated names are documented here.

   G.1 Connection protocol channel request names

       These names can be sent in a SSH_MSG_CHANNEL_REQUEST message.

       simple@putty.projects.tartarus.org

           This is sent by a client to announce that it will not have more
           than one channel open at a time in the current connection (that
           one being the one the request is sent on). The intention is that
           the server, knowing this, can set the window on that one channel
           to something very large, and leave flow control to TCP. There is
           no message-specific data.

       winadj@putty.projects.tartarus.org

           PuTTY sends this request along with some
           SSH_MSG_CHANNEL_WINDOW_ADJUST messages as part of its window-
           size tuning. It can be sent on any type of channel. There is no
           message-specific data. Servers MUST treat it as an unrecognised
           request and respond with SSH_MSG_CHANNEL_FAILURE.

           (Some SSH servers get confused by this message, so there is a
           bug-compatibility mode for disabling it. See section 4.27.3.)

   G.2 Key exchange method names

       rsa-sha1-draft-00@putty.projects.tartarus.org

       rsa-sha256-draft-00@putty.projects.tartarus.org

       rsa1024-sha1-draft-01@putty.projects.tartarus.org

       rsa1024-sha256-draft-01@putty.projects.tartarus.org

       rsa2048-sha256-draft-01@putty.projects.tartarus.org

       rsa1024-sha1-draft-02@putty.projects.tartarus.org

       rsa2048-sha512-draft-02@putty.projects.tartarus.org

       rsa1024-sha1-draft-03@putty.projects.tartarus.org

       rsa2048-sha256-draft-03@putty.projects.tartarus.org

       rsa1024-sha1-draft-04@putty.projects.tartarus.org

       rsa2048-sha256-draft-04@putty.projects.tartarus.org

           These appeared in various drafts of what eventually became
           RFC 4432. They have been superseded by rsa1024-sha1 and rsa2048-
           sha256.

   G.3 Encryption algorithm names

       arcfour128-draft-00@putty.projects.tartarus.org

       arcfour256-draft-00@putty.projects.tartarus.org

           These were used in drafts of what eventually became RFC 4345.
           They have been superseded by arcfour128 and arcfour256.

   G.4 Agent extension request names

       The SSH agent protocol, which is only specified in an Internet-
       Draft at the time of writing (draft-miller-ssh-agent),
       defines an extension mechanism. These names can be sent in an
       SSH_AGENTC_EXTENSION message.

       add-ppk@putty.projects.tartarus.org

           The payload is a single SSH-2 string containing a keypair in
           the PPK format defined in appendix C. Compared to the standard
           SSH_AGENTC_ADD_IDENTITY, this extension allows adding keys
           in encrypted form, with the agent requesting a decryption
           passphrase from the user on demand, and able to revert the key
           to encrypted form.

       reencrypt@putty.projects.tartarus.org

           The payload is a single SSH-2 string specifying a public key
           blob, as in SSH_AGENTC_REMOVE_IDENTITY. Requests that the agent
           forget any cleartext form of a specific key.

           Returns SSH_AGENT_SUCCESS if the agent ended up holding the
           key only in encrypted form (even if it was already encrypted);
           returns SSH_AGENT_EXTENSION_FAILURE if not (if it wasn't held by
           the agent at all, or only in cleartext form).

       reencrypt-all@putty.projects.tartarus.org

           No payload. Requests that the agent forget the cleartext form of
           any keys for which it holds an encrypted form.

           If the agent holds any keys with an encrypted form (or no keys
           at all), returns SSH_AGENT_SUCCESS to indicate that no such keys
           are now held in cleartext form, followed by a uint32 specifying
           how many keys remain in cleartext form (because the agent didn't
           hold an encrypted form for them). If the agent holds nothing but
           keys in cleartext form, returns SSH_AGENT_EXTENSION_FAILURE.

       list-extended@putty.projects.tartarus.org

           No payload. Returns SSH_AGENT_SUCCESS followed by a list of
           identities similar to SSH_AGENT_IDENTITIES_ANSWER, except that
           each key has an extra SSH-2 string at the end. Currently that
           string contains a single uint32 flags word, with the following
           bits defined:

           Bit 0

               If set, key is held with an encrypted form (so that the
               `reencrypt' extension can do something useful with it).

           Bit 1

               If set, key's cleartext form is not currently held (so the
               user will have to supply a passphrase before the key can be
               used).

Appendix H: PuTTY authentication plugin protocol
------------------------------------------------

       This appendix contains the specification for the protocol spoken
       over local IPC between PuTTY and an authentication helper plugin.

       If you already have an authentication plugin and want to configure
       PuTTY to use it, see section 4.22.3 for how to do that. This
       appendix is for people writing new authentication plugins.

   H.1 Requirements

       The following requirements informed the specification of this
       protocol.

       *Automate keyboard-interactive authentication.* We're motivated in
       the first place by the observation that the general SSH userauth
       method `keyboard-interactive' (defined in [RFC4256]) can be used
       for many kinds of challenge/response or one-time-password styles
       of authentication, and in more than one of those, the necessary
       responses might be obtained from an auxiliary network connection,
       such as an HTTPS transaction. So it's useful if a user doesn't have
       to manually copy-type or copy-paste from their web browser into
       their SSH client, but instead, the process can be automated.

       *Be able to pass prompts on to the user.* On the other hand, some
       userauth methods can be only _partially_ automated; some of the
       server's prompts might still require human input. Also, the plugin
       automating the authentication might need to ask its own questions
       that are not provided by the SSH server. (For example, `please
       enter the master key that the real response will be generated by
       hashing'.) So after the plugin intercepts the server's questions, it
       needs to be able to ask its own questions of the user, which may or
       may not be the same questions sent by the server.

       *Allow automatic generation of the username.* Sometimes, the
       authentication method comes with a mechanism for discovering the
       username to be used in the SSH login. So the plugin has to start up
       early enough that the client hasn't committed to a username yet.

       *Future expansion route to other SSH userauth flavours.* The initial
       motivation for this protocol is specific to keyboard-interactive.
       But other SSH authentication methods exist, and they may also
       benefit from automation in future. We're making no attempt here to
       predict what those methods might be or how they might be automated,
       but we do need to leave a space where they can be slotted in later
       if necessary.

       *Minimal information loss.* Keyboard-interactive prompts and replies
       should be passed to and from the plugin in a form as close as
       possible to the way they look on the wire in SSH itself. Therefore,
       the protocol resembles SSH in its data formats and marshalling
       (instead of, for example, translating from SSH binary packet style
       to another well-known format such as JSON, which would introduce
       edge cases in character encoding).

       *Half-duplex.* Simultaneously trying to read one I/O stream and
       write another adds a lot of complexity to software. It becomes
       necessary to have an organised event loop containing select or
       WaitForMultipleObjects or similar, which can invoke the handler
       for whichever event happens soonest. There's no need to add that
       complexity in an application like this, which isn't transferring
       large amounts of bulk data or multiplexing unrelated activities. So,
       to keep life simple for plugin authors, we set the ground rule that
       it must always be 100% clear which side is supposed to be sending a
       message next. That way, the plugin can be written as sequential code
       progressing through the protocol, making simple read and write calls
       to receive or send each message.

       *Communicate success/failure, to facilitate caching in the plugin.*
       A plugin might want to cache recently used data for next time, but
       only in the case where authentication using that data was actually
       successful. So the client has to tell the plugin what the outcome
       was, if it's known. (But this is best-effort only. Obviously the
       plugin cannot _depend_ on hearing the answer, because any IPC
       protocol at all carries the risk that the other end might crash or
       be killed by things outside its control.)

   H.2 Transport and configuration

       Plugins are executable programs on the client platform.

       The SSH client must be manually configured to use a plugin for
       a particular connection. The configuration takes the form of a
       command line, including the location of the plugin executable,
       and optionally command-line arguments that are meaningful to the
       particular plugin.

       The client invokes the plugin as a subprocess, passing it a pair of
       8-bit-clean pipes as its standard input and output. On those pipes,
       the client and plugin will communicate via the protocol specified
       below.

   H.3 Data formats and marshalling

       This protocol borrows the low-level data formatting from SSH itself,
       in particular the following wire encodings from [RFC4251] section 5:

       *byte*

           An integer between 0 and 0xFF inclusive, transmitted as a single
           byte of binary data.

       *boolean*

           The values `true' or `false', transmitted as the bytes 1 and 0
           respectively.

       *uint32*

           An integer between 0 and 0xFFFFFFFF inclusive, transmitted as 4
           bytes of binary data, in big-endian (`network') byte order.

       *string*

           A sequence of bytes, preceded by a *uint32* giving the number of
           bytes in the sequence. The length field does not include itself.
           For example, the empty string is represented by four zero bytes
           (the *uint32* encoding of 0); the string "AB" is represented by
           the six bytes 0,0,0,2,'A','B'.

       Unlike SSH itself, the protocol spoken between the client and the
       plugin is unencrypted, because local inter-process pipes are assumed
       to be secured by the OS kernel. So the binary packet protocol is
       much simpler than SSH proper, and is similar to SFTP and the OpenSSH
       agent protocol.

       The data sent in each direction of the conversation consists of a
       sequence of *messages* exchanged between the SSH client and the
       plugin. Each message is encoded as a *string*. The contents of the
       string begin with a *byte* giving the message type, which determines
       the format of the rest of the message.

   H.4 Protocol versioning

       This protocol itself is versioned. At connection setup, the client
       states the highest version number it knows how to speak, and then
       the plugin responds by choosing the version number that will
       actually be spoken (which may not be higher than the client's
       value).

       Including a version number makes it possible to make breaking
       changes to the protocol later.

       Even version numbers represent released versions of this spec.
       Odd numbers represent drafts or development versions in between
       releases. A client and plugin negotiating an odd version number
       are not guaranteed to interoperate; the developer testing the
       combination is responsible for ensuring the two are compatible.

       This document describes version 2 of the protocol, the first
       released version. (The initial drafts had version 1.)

   H.5 Overview and sequence of events

       At the very beginning of the user authentication phase of SSH, the
       client launches the plugin subprocess, if one is configured. It
       immediately sends the PLUGIN_INIT message, telling the plugin some
       initial information about where the SSH connection is to.

       The plugin responds with PLUGIN_INIT_RESPONSE, which may optionally
       tell the SSH client what username to use.

       The client begins trying to authenticate with the SSH server in the
       usual way, using the username provided by the plugin (if any) or
       alternatively one obtained via its normal (non-plugin) policy.

       The client follows its normal policy for selecting authentication
       methods to attempt. If it chooses a method that this protocol does
       not cover, then the client will perform that method in its own way
       without consulting the plugin.

       However, if the client and server decide to attempt a method that
       this protocol _does_ cover, then the client sends PLUGIN_PROTOCOL
       specifying the SSH protocol id for the authentication method being
       used. The plugin responds with PLUGIN_PROTOCOL_ACCEPT if it's
       willing to assist with this auth method, or PLUGIN_PROTOCOL_REJECT
       if it isn't.

       If the plugin sends PLUGIN_PROTOCOL_REJECT, then the client will
       proceed as if the plugin were not present. Later, if another auth
       method is negotiated (either because this one failed, or because it
       succeeded but the server wants multiple auth methods), the client
       may send a further PLUGIN_PROTOCOL and try again.

       If the plugin sends PLUGIN_PROTOCOL_ACCEPT, then a protocol segment
       begins that is specific to that auth method, terminating in either
       PLUGIN_AUTH_SUCCESS or PLUGIN_AUTH_FAILURE. After that, again, the
       client may send a further PLUGIN_PROTOCOL.

       Currently the only supported method is `keyboard-interactive',
       defined in [RFC4256]. Once the client has announced this to the
       server, the followup protocol is as follows:

       Each time the server sends an SSH_MSG_USERAUTH_INFO_REQUEST message
       requesting authentication responses from the user, the SSH client
       translates the message into PLUGIN_KI_SERVER_REQUEST and passes it
       on to the plugin.

       At this point, the plugin may optionally send back
       PLUGIN_KI_USER_REQUEST containing prompts to be presented
       to the actual user. The client will reply with a matching
       PLUGIN_KI_USER_RESPONSE after asking the user to reply to the
       question(s) in the request message. The plugin can repeat this cycle
       multiple times.

       Once the plugin has all the information it needs to
       respond to the server's authentication prompts, it sends
       PLUGIN_KI_SERVER_RESPONSE back to the client, which translates it
       into SSH_MSG_USERAUTH_INFO_RESPONSE to send on to the server.

       After that, as described in [RFC4256], the server is free
       to accept authentication, reject it, or send another
       SSH_MSG_USERAUTH_INFO_REQUEST. Each SSH_MSG_USERAUTH_INFO_REQUEST is
       dealt with in the same way as above.

       If the server terminates keyboard-interactive authentication
       with SSH_MSG_USERAUTH_SUCCESS or SSH_MSG_USERAUTH_FAILURE, the
       client informs the plugin by sending either PLUGIN_AUTH_SUCCESS
       or PLUGIN_AUTH_FAILURE. PLUGIN_AUTH_SUCCESS is sent when _that
       particular authentication method_ was successful, regardless of
       whether the SSH server chooses to request further authentication
       afterwards: in particular, SSH_MSG_USERAUTH_FAILURE with the
       `partial success' flag (see [RFC4252] section 5.1) translates into
       PLUGIN_AUTH_SUCCESS.

       The plugin's standard input will close when the client no longer
       requires the plugin's services, for any reason. This could be
       because authentication is complete (with overall success or overall
       failure), or because the user has manually aborted the session in
       mid-authentication, or because the client crashed.

   H.6 Message formats

       This section describes the format of every message in the protocol.

       As described in section H.3, every message starts with the same two
       fields:

        -  *uint32*: overall length of the message

        -  *byte*: message type.

       The length field does not include itself, but does include the type
       code.

       The following subsections each give the format of the remainder of
       the message, after the type code.

       The type codes themselves are defined here:

         #define PLUGIN_INIT                   1
         #define PLUGIN_INIT_RESPONSE          2
         #define PLUGIN_PROTOCOL               3
         #define PLUGIN_PROTOCOL_ACCEPT        4
         #define PLUGIN_PROTOCOL_REJECT        5
         #define PLUGIN_AUTH_SUCCESS           6
         #define PLUGIN_AUTH_FAILURE           7
         #define PLUGIN_INIT_FAILURE           8
         
         #define PLUGIN_KI_SERVER_REQUEST     20
         #define PLUGIN_KI_SERVER_RESPONSE    21
         #define PLUGIN_KI_USER_REQUEST       22
         #define PLUGIN_KI_USER_RESPONSE      23

       If this protocol is extended to be able to assist with further
       auth methods, their message type codes will also begin from 20,
       overlapping the codes for keyboard-interactive.

 H.6.1 PLUGIN_INIT

       *Direction*: client to plugin

       *When*: the first message sent at connection startup

       *What happens next*: the plugin will send PLUGIN_INIT_RESPONSE or
       PLUGIN_INIT_FAILURE

       *Message contents after the type code*:

        -  *uint32*: the highest version number of this protocol that the
           client knows how to speak.

        -  *string*: the hostname of the server. This will be the
           _logical_ hostname, in cases where it differs from the physical
           destination of the network connection. Whatever name would be
           used by the SSH client to cache the server's host key, that's
           the same name passed in this message.

        -  *uint32*: the port number on the server. (Together with the host
           name, this forms a primary key identifying a particular server.
           Port numbers may be vital because a single host can run two
           unrelated SSH servers with completely different authentication
           requirements, e.g. system sshd on port 22 and Gerrit on port
           29418.)

        -  *string*: the username that the client will use to log in, if
           the plugin chooses not to override it. An empty string means
           that the client has no opinion about this (and might, for
           example, prompt the user).

 H.6.2 PLUGIN_INIT_RESPONSE

       *Direction*: plugin to client

       *When*: response to PLUGIN_INIT

       *What happens next*: the client will send PLUGIN_PROTOCOL, or
       perhaps terminate the session (if no auth method is ever negotiated
       that the plugin can help with)

       *Message contents after the type code*:

        -  *uint32*: the version number of this protocol that the
           connection will use. Must be no greater than the max version
           number sent by the client in PLUGIN_INIT.

        -  *string*: the username that the plugin suggests the client use.
           An empty string means that the plugin has no opinion and the
           client should stick with the username it already had (or prompt
           the user, if it had none).

 H.6.3 PLUGIN_INIT_FAILURE

       *Direction*: plugin to client

       *When*: response to PLUGIN_INIT

       *What happens next*: the session is over

       *Message contents after the type code*:

        -  *string*: an error message to present to the user indicating why
           the plugin was unable to start up.

 H.6.4 PLUGIN_PROTOCOL

       *Direction*: client to plugin

       *When*: sent after PLUGIN_INIT_RESPONSE, or after a previous auth
       phase terminates with PLUGIN_AUTH_SUCCESS or PLUGIN_AUTH_FAILURE

       *What happens next*: the plugin will send PLUGIN_PROTOCOL_ACCEPT or
       PLUGIN_PROTOCOL_REJECT

       *Message contents after the type code*:

        -  *string*: the SSH protocol id of the auth method the client
           intends to attempt. Currently the only method specified for use
           in this protocol is `keyboard-interactive'.

 H.6.5 PLUGIN_PROTOCOL_REJECT

       *Direction*: plugin to client

       *When*: sent after PLUGIN_PROTOCOL

       *What happens next*: the client will either send another
       PLUGIN_PROTOCOL or terminate the session

       *Message contents after the type code*:

        -  *string*: an error message to present to the user, explaining
           why the plugin cannot help with this authentication protocol.

           An example might be `unable to open <config file>: <OS error
           message>', if the plugin depends on some configuration that the
           user has not set up.

           If the plugin does not support this this particular
           authentication protocol at all, this string should be left
           blank, so that no message will be presented to the user at all.

 H.6.6 PLUGIN_PROTOCOL_ACCEPT

       *Direction*: plugin to client

       *When*: sent after PLUGIN_PROTOCOL

       *What happens next*: depends on the auth protocol agreed on. For
       keyboard-interactive, the client will send PLUGIN_KI_SERVER_REQUEST
       or PLUGIN_AUTH_SUCCESS or PLUGIN_AUTH_FAILURE. No other method is
       specified.

       *Message contents after the type code*: none.

 H.6.7 PLUGIN_KI_SERVER_REQUEST

       *Direction*: client to plugin

       *When*: sent after PLUGIN_PROTOCOL, or after a previous
       PLUGIN_KI_SERVER_RESPONSE, when the SSH server has sent
       SSH_MSG_USERAUTH_INFO_REQUEST

       *What happens next*: the plugin will send either
       PLUGIN_KI_USER_REQUEST or PLUGIN_KI_SERVER_RESPONSE

       *Message contents after the type code*: the exact contents of the
       SSH_MSG_USERAUTH_INFO_REQUEST just sent by the server. See [RFC4256]
       section 3.2 for details. The summary:

        -  *string*: name of this prompt collection (e.g. to use as a
           dialog-box title)

        -  *string*: instructions to be displayed before this prompt
           collection

        -  *string*: language tag (deprecated)

        -  *uint32*: number of prompts in this collection

        -  That many copies of:

            -  *string*: prompt (in UTF-8)

            -  *boolean*: whether the response to this prompt is safe to
               echo to the screen

 H.6.8 PLUGIN_KI_SERVER_RESPONSE

       *Direction*: plugin to client

       *When*: response to PLUGIN_KI_SERVER_REQUEST, perhaps after
       one or more intervening pairs of PLUGIN_KI_USER_REQUEST and
       PLUGIN_KI_USER_RESPONSE

       *What happens next*: the client will send a further
       PLUGIN_KI_SERVER_REQUEST, or PLUGIN_AUTH_SUCCESS or
       PLUGIN_AUTH_FAILURE

       *Message contents after the type code*: the exact contents of the
       SSH_MSG_USERAUTH_INFO_RESPONSE that the client should send back to
       the server. See [RFC4256] section 3.4 for details. The summary:

        -  *uint32*: number of responses (must match the `number of
           prompts' field from the corresponding server request)

        -  That many copies of:

            -  *string*: response to the _n_th prompt (in UTF-8)

 H.6.9 PLUGIN_KI_USER_REQUEST

       *Direction*: plugin to client

       *When*: response to PLUGIN_KI_SERVER_REQUEST, if the plugin cannot
       answer the server's auth prompts without presenting prompts of its
       own to the user

       *What happens next*: the client will send PLUGIN_KI_USER_RESPONSE

       *Message contents after the type code*: exactly the same as in
       PLUGIN_KI_SERVER_REQUEST (see section H.6.7).

H.6.10 PLUGIN_KI_USER_RESPONSE

       *Direction*: client to plugin

       *When*: response to PLUGIN_KI_USER_REQUEST

       *What happens next*: the plugin will send PLUGIN_KI_SERVER_RESPONSE,
       or another PLUGIN_KI_USER_REQUEST

       *Message contents after the type code*: exactly the same as in
       PLUGIN_KI_SERVER_RESPONSE (see section H.6.8).

H.6.11 PLUGIN_AUTH_SUCCESS

       *Direction*: client to plugin

       *When*: sent after PLUGIN_KI_SERVER_RESPONSE, or (in unusual cases)
       after PLUGIN_PROTOCOL_ACCEPT

       *What happens next*: the client will either send another
       PLUGIN_PROTOCOL or terminate the session

       *Message contents after the type code*: none

H.6.12 PLUGIN_AUTH_FAILURE

       *Direction*: client to plugin

       *When*: sent after PLUGIN_KI_SERVER_RESPONSE, or (in unusual cases)
       after PLUGIN_PROTOCOL_ACCEPT

       *What happens next*: the client will either send another
       PLUGIN_PROTOCOL or terminate the session

       *Message contents after the type code*: none

   H.7 References

       [RFC4251] RFC 4251, `The Secure Shell (SSH) Protocol Architecture'.

       [RFC4252] RFC 4252, `The Secure Shell (SSH) Authentication
       Protocol'.

       [RFC4256] RFC 4256, `Generic Message Exchange Authentication for the
       Secure Shell Protocol (SSH)' (better known by its wire id `keyboard-
       interactive').

Appendix I: PuTTY privacy considerations
----------------------------------------

       This appendix lists the implications of using PuTTY for your privacy
       and personal data.

       The short summary: PuTTY never `phones home' to us, the developers.
       It does store data on your own computer, and it does transmit data
       over the network, but in both cases, only as necessary to do its
       job. In particular, data is only transmitted over the network to the
       server you told PuTTY to connect to.

       But if you're concerned about exactly _what_ information is stored
       or transmitted, then here's a more detailed description.

   I.1 Information that PuTTY stores locally

       When you use PuTTY, it stores a small amount of information on
       your computer, necessary for doing its own job. This information
       is stored in the user account of the user who runs PuTTY, so it is
       under your control: you can view it, change it, or delete it.

       If you need to delete all of this data, you can use the `-cleanup'
       command-line option, as described in section 3.11.2.

       PuTTY does not transmit your saved session data to any other site.
       However, you may need to be aware of the fact that it is stored on
       _your_ computer. (For example, somebody else accessing your computer
       might be able to find a list of sites you have connected to, if you
       have saved details of them.)

 I.1.1 Host key cache

       If you use the SSH protocol, then PuTTY stores a list of the SSH
       servers you have connected to, together with their host keys.

       This is known as the `host key cache'. It is used to detect network
       attacks, by notifying you if a server you've connected to before
       doesn't look like the same one you thought it was. (See section 2.2
       for a basic introduction to host keys.)

       The host key cache is optional. An entry is only saved in the host
       key cache if you select the `Accept' action at one of the PuTTY
       suite's host key verification prompts. So if you want to make an SSH
       connection without PuTTY saving any trace of where you connected to,
       you can press `Connect Once' instead of `Accept', which does not
       store the host key in the cache.

       However, if you do this, PuTTY can't automatically detect the host
       key changing in the future, so you should check the key fingerprint
       yourself every time you connect. *This is vitally important.* If you
       don't let PuTTY cache host keys _and_ don't check them yourself,
       then it becomes easy for an attacker to interpose a listener between
       you and the server you're connecting to. The entire cryptographic
       system of SSH depends on making sure the host key is right.

       The host key cache is only used by SSH. No other protocol supported
       by PuTTY has any analogue of it.

 I.1.2 Saved sessions

       After you set up PuTTY's configuration for a particular network
       connection, you can choose to save it as a `saved session', so that
       you can make the same connection again later without having to re-
       enter all the details.

       PuTTY will not do this unless you use the `Save' button in
       its configuration box. It never saves session configuration
       automatically.

       So if you want to make an SSH connection without leaving any trace
       of where you connected to, you should not make a saved session for
       that connection. Instead, re-enter the details by hand every time
       you do it.

 I.1.3 Jump list

       On Windows, the operating system provides a feature called a `jump
       list'. This is a menu that pops up from an application's icon in
       the Windows taskbar, and the application can configure entries that
       appear in it. Applications typically include menu items to re-launch
       recently used documents or configurations.

       PuTTY updates its jump list whenever a saved session is loaded,
       either to launch it immediately or to load it within the
       configuration dialog box. So if you have a collection of saved
       sessions, the jump list will contain a record of which ones you have
       recently used.

       An exception is that saved sessions are not included in the jump
       list if they are not `launchable', meaning that they actually
       specify a host name or serial port to connect to. A non-launchable
       session can specify all the other configuration details (such as
       fonts, window size, keyboard setup, SSH features, etc), but leave
       out the hostname.

       If you want to avoid leaving any evidence of having made a
       particular connection, then make the connection without creating
       a launchable saved session for it: either make no saved session
       at all, or create a non-launchable one which sets up every detail
       _except_ the destination host name. Then it won't appear in the jump
       list.

       (The saved session itself would also be evidence, of course, as
       discussed in the previous section.)

 I.1.4 Log files

       PuTTY can be configured to save a log file of your entire session
       to the computer you run it on. By default it does not do so: the
       content of your session is not saved.

       See section 4.2 for details of the logging features. Some logging
       modes store only output sent by the server and printed in PuTTY's
       terminal window. Other more thorough modes also store your input
       that PuTTY sends _to_ the server.

       If the logging feature is enabled, then by default, PuTTY will avoid
       saving data in the log file that it knows to be sensitive, such as
       passwords. However, it cannot reliably identify _all_ passwords. If
       you use a password for your initial login to an SSH server, PuTTY
       knows that is a password, and will omit it from the log file. But if
       after login you type a password into an application on the server,
       then PuTTY will not know that _that_ is a password, so it will
       appear in the log file, if PuTTY is writing a type that includes
       keyboard input.

       PuTTY can also be configured to include all passwords in its log
       files, even the ones it would normally leave out. This is intended
       for debugging purposes, for example if a server is refusing your
       password and you need to check whether the password is being sent
       correctly. We do not recommend enabling this option routinely.

 I.1.5 Random seed file

       PuTTY stores a small file of random bytes under the name
       `putty.rnd', which is reloaded the next time it is run and used to
       seed its random number generator. These bytes are meaningless and
       random, and do not contain an encrypted version of anything.

   I.2 Sending information over the network

       PuTTY is a communications tool. Its _purpose_ is to connect to
       another computer, over a network or a serial port, and send
       information. However it only makes the network connections that its
       configuration instructs it to.

 I.2.1 PuTTY only connects to the specified destination host

       No PuTTY tool will `phone home' to any site under the control of
       us (the development team), or to any other site apart from the
       destination host or proxy host in its configuration, and any DNS
       server that is needed to look up the IP addresses corresponding to
       those host names.

       No information about your network sessions, and no information from
       the computer you run PuTTY on, is collected or recorded by the PuTTY
       developers.

       Information you provide to PuTTY (via keyboard input, the command
       line, or files loaded by the file transfer tools) is sent to the
       server that PuTTY's configuration tells it to connect to. It is not
       sent anywhere else.

 I.2.2 What data is sent to the destination host

       When you log in to a server, PuTTY will send your username. If you
       use a password to authenticate to the server, PuTTY will send it
       that password as well.

       (Therefore, the server is told what your password is during login.
       This means that if you use the same password on two servers, the
       administrator of one could find out your password and log in to your
       account on the other.)

       If you use an SSH private key to authenticate, PuTTY will send the
       _public_ key, but not the private key. If you typed a passphrase to
       decrypt the private key, PuTTY will not send the passphrase either.

       (Therefore, it is safer to use the same _public key_ to authenticate
       to two SSH servers. Neither server gains the ability to impersonate
       you to the other server. However, if the server maintainers talked
       to each other, they would at least be able to find out that your
       accounts on the two machines were owned by the same person, if they
       didn't already know.)

       When PuTTY prompts for a private key passphrase, a small copy of the
       PuTTY icon appears to the left of the prompt, to indicate that the
       prompt was genuinely from PuTTY. (We call this a `trust sigil'.)
       That icon never appears next to text sent from the server. So if a
       server tries to mimic that prompt to trick you into telling it your
       private key passphrase, it won't be able to fake that trust sigil,
       and you can tell the difference.

       If you're running Pageant, and you haven't configured a specific
       public key to authenticate to this server, then PuTTY will try
       all the keys in Pageant one after the other, sending each public
       key to the server to see if it's acceptable. This can lead to the
       server finding out about other public keys you own. However, if you
       configure PuTTY to use a specific public key, then it will ignore
       all the other keys in Pageant.

       Once you have logged in, keystrokes you type in the PuTTY terminal
       window, and data you paste in with the mouse, are sent to the
       destination host. That is PuTTY's primary job.

       The server can request PuTTY to send details of mouse movements in
       the terminal window, in order to implement mouse-controlled user
       interfaces on the server. If you consider this to be a privacy
       intrusion, you can turn off that terminal feature in the Features
       configuration panel (`Disable xterm-style mouse reporting', as
       described in section 4.6.2).

   I.3 Configuration

       The operation of a PuTTY network tool is controlled by its
       configuration. This configuration is obtained from:

        -  the command line used to run the tool

        -  settings configured in the GUI before opening a network session

        -  optionally, the contents of a saved session, if the command line
           or a GUI action instructed PuTTY to load one

        -  the special saved session called `Default Settings', which
           applies if no other saved session is loaded

        -  defaults built in to PuTTY itself.

       The defaults built in to PuTTY do not tell it to save log files, or
       specify the name of any network site to connect to.

       However, if PuTTY has been installed for you by somebody else,
       such as an organisation, then that organisation may have provided
       their own default configuration. In that situation you may wish
       to check that the defaults they have set are compatible with your
       privacy needs. For example, an organisation providing your PuTTY
       configuration might configure PuTTY to save log files of your
       sessions, even though PuTTY's own default is not to do so.

   I.4 Modified versions of PuTTY

       PuTTY is free software. Its source code is available, so anyone
       can make a modified version of it. The modified version can behave
       differently from the original in any way it likes.

       This list of privacy considerations only applies to the original
       version of PuTTY, as distributed by its development team. We
       cannot make any promises about the behaviour of modified versions
       distributed by other people.

[PuTTY release 0.83]