from __future__ import annotations

import logging
from abc import ABC, abstractmethod
from dataclasses import dataclass
from enum import Enum, IntEnum
from typing import Any, Callable, Dict, Tuple, Optional

from .exceptions import MaxRetriesException, RequestFailedException
from .protocol import InverterProtocol, ProtocolCommand, ProtocolResponse, TcpInverterProtocol, UdpInverterProtocol

logger = logging.getLogger(__name__)


class SensorKind(Enum):
    """
    Enumeration of sensor kinds.

    Possible values are:
    PV - inverter photo-voltaic (e.g. dc voltage of pv panels)
    AC - inverter grid output (e.g. ac voltage of grid connected output)
    UPS - inverter ups/eps/backup output (e.g. ac voltage of backup/off-grid connected output)
    BAT - battery (e.g. dc voltage of connected battery pack)
    GRID - power grid/smart meter (e.g. active power exported to grid)
    BMS - BMS direct data (e.g. dc voltage of)
    """

    PV = 1
    AC = 2
    UPS = 3
    BAT = 4
    GRID = 5
    BMS = 6


@dataclass
class Sensor:
    """Definition of inverter sensor and its attributes"""

    id_: str
    offset: int
    name: str
    size_: int
    unit: str
    kind: Optional[SensorKind]

    def read_value(self, data: ProtocolResponse) -> Any:
        """Read the sensor value from data at current position"""
        raise NotImplementedError()

    def read(self, data: ProtocolResponse) -> Any:
        """Read the sensor value from data (at sensor offset)"""
        data.seek(self.offset)
        return self.read_value(data)

    def encode_value(self, value: Any, register_value: bytes = None) -> bytes:
        """Encode the (setting mostly) value to (usually) 2 bytes raw register value"""
        raise NotImplementedError()


class OperationMode(IntEnum):
    """
    Enumeration of sensor kinds.

    Possible values are:
    GENERAL - General mode
    OFF_GRID - Off grid mode
    BACKUP - Backup mode
    ECO - Eco mode
    PEAK_SHAVING - Peak shaving mode
    ECO_CHARGE - Eco mode with a single "Charge" group valid all the time (from 00:00-23:59, Mon-Sun)
    ECO_DISCHARGE - Eco mode with a single "Discharge" group valid all the time (from 00:00-23:59, Mon-Sun)
    """

    GENERAL = 0
    OFF_GRID = 1
    BACKUP = 2
    ECO = 3
    PEAK_SHAVING = 4
    SELF_USE = 5
    ECO_CHARGE = 98
    ECO_DISCHARGE = 99


class Inverter(ABC):
    """
    Common superclass for various inverter models implementations.
    Represents the inverter state and its basic behavior
    """

    def __init__(self, host: str, port: int, comm_addr: int = 0, timeout: int = 1, retries: int = 3):
        self._protocol: InverterProtocol = self._create_protocol(host, port, comm_addr, timeout, retries)
        self._consecutive_failures_count: int = 0

        self.model_name: str | None = None
        self.serial_number: str | None = None
        self.rated_power: int = 0
        self.ac_output_type: int | None = None
        self.firmware: str | None = None
        self.arm_firmware: str | None = None
        self.modbus_version: int | None = None
        self.dsp1_version: int = 0
        self.dsp2_version: int = 0
        self.dsp_svn_version: int | None = None
        self.arm_version: int = 0
        self.arm_svn_version: int | None = None

    def _read_command(self, offset: int, count: int) -> ProtocolCommand:
        """Create read protocol command."""
        return self._protocol.read_command(offset, count)

    def _write_command(self, register: int, value: int) -> ProtocolCommand:
        """Create write protocol command."""
        return self._protocol.write_command(register, value)

    def _write_multi_command(self, offset: int, values: bytes) -> ProtocolCommand:
        """Create write multiple protocol command."""
        return self._protocol.write_multi_command(offset, values)

    async def _read_from_socket(self, command: ProtocolCommand) -> ProtocolResponse:
        try:
            result = await command.execute(self._protocol)
            self._consecutive_failures_count = 0
            return result
        except MaxRetriesException:
            self._consecutive_failures_count += 1
            raise RequestFailedException(f'No valid response received even after {self._protocol.retries} retries',
                                         self._consecutive_failures_count) from None
        except RequestFailedException as ex:
            self._consecutive_failures_count += 1
            raise RequestFailedException(ex.message, self._consecutive_failures_count) from None

    def set_keep_alive(self, keep_alive: bool) -> None:
        self._protocol.keep_alive = keep_alive

    @abstractmethod
    async def read_device_info(self):
        """
        Request the device information from the inverter.
        The inverter instance variables will be loaded with relevant data.
        """
        raise NotImplementedError()

    @abstractmethod
    async def read_runtime_data(self) -> Dict[str, Any]:
        """
        Request the runtime data from the inverter.
        Answer dictionary of individual sensors and their values.
        List of supported sensors (and their definitions) is provided by sensors() method.
        """
        raise NotImplementedError()

    @abstractmethod
    async def read_setting(self, setting_id: str) -> Any:
        """
        Read the value of specific inverter setting/configuration parameter.
        Setting must be in list provided by settings() method, otherwise ValueError is raised.
        """
        raise NotImplementedError()

    @abstractmethod
    async def write_setting(self, setting_id: str, value: Any):
        """
        Set the value of specific inverter settings/configuration parameter.
        Setting must be in list provided by settings() method, otherwise ValueError is raised.

        BEWARE !!!
        This method modifies inverter operational parameter (usually accessible to installers only).
        Use with caution and at your own risk !
        """
        raise NotImplementedError()

    @abstractmethod
    async def read_settings_data(self) -> Dict[str, Any]:
        """
        Request the settings data from the inverter.
        Answer dictionary of individual settings and their values.
        List of supported settings (and their definitions) is provided by settings() method.
        """
        raise NotImplementedError()

    async def send_command(
            self, command: bytes, validator: Callable[[bytes], bool] = lambda x: True
    ) -> ProtocolResponse:
        """
        Send low level command (as bytes).
        Answer ProtocolResponse with command's raw response data.
        """
        return await self._read_from_socket(ProtocolCommand(command, validator))

    @abstractmethod
    async def get_grid_export_limit(self) -> int:
        """
        Get the current grid export limit in W
        """
        raise NotImplementedError()

    @abstractmethod
    async def set_grid_export_limit(self, export_limit: int) -> None:
        """
        BEWARE !!!
        This method modifies inverter operational parameter accessible to installers only.
        Use with caution and at your own risk !

        Set the grid export limit in W
        """
        raise NotImplementedError()

    @abstractmethod
    async def get_operation_modes(self, include_emulated: bool) -> Tuple[OperationMode, ...]:
        """
        Answer list of supported inverter operation modes
        """
        return ()

    @abstractmethod
    async def get_operation_mode(self) -> OperationMode:
        """
        Get the inverter operation mode
        """
        raise NotImplementedError()

    @abstractmethod
    async def set_operation_mode(self, operation_mode: OperationMode, eco_mode_power: int = 100,
                                 eco_mode_soc: int = 100) -> None:
        """
        BEWARE !!!
        This method modifies inverter operational parameter accessible to installers only.
        Use with caution and at your own risk !

        Set the inverter operation mode

        The modes ECO_CHARGE and ECO_DISCHARGE are not real inverter operation modes, but a convenience
        shortcuts to enter Eco Mode with a single group valid all the time (from 00:00-23:59, Mon-Sun)
        charging or discharging with optional charging power and SoC (%) parameters.
        """
        raise NotImplementedError()

    @abstractmethod
    async def get_ongrid_battery_dod(self) -> int:
        """
        Get the On-Grid Battery DoD
        0% - 89%
        """
        raise NotImplementedError()

    @abstractmethod
    async def set_ongrid_battery_dod(self, dod: int) -> None:
        """
        BEWARE !!!
        This method modifies On-Grid Battery DoD parameter accessible to installers only.
        Use with caution and at your own risk !

        Set the On-Grid Battery DoD
        0% - 89%
        """
        raise NotImplementedError()

    @abstractmethod
    def sensors(self) -> Tuple[Sensor, ...]:
        """
        Return tuple of sensor definitions
        """
        raise NotImplementedError()

    @abstractmethod
    def settings(self) -> Tuple[Sensor, ...]:
        """
        Return tuple of settings definitions
        """
        raise NotImplementedError()

    @staticmethod
    def _create_protocol(host: str, port: int, comm_addr: int, timeout: int, retries: int) -> InverterProtocol:
        if port == 502:
            return TcpInverterProtocol(host, port, comm_addr, timeout, retries)
        else:
            return UdpInverterProtocol(host, port, comm_addr, timeout, retries)

    @staticmethod
    def _map_response(response: ProtocolResponse, sensors: Tuple[Sensor, ...]) -> Dict[str, Any]:
        """Process the response data and return dictionary with runtime values"""
        result = {}
        for sensor in sensors:
            try:
                result[sensor.id_] = sensor.read(response)
            except ValueError:
                logger.exception("Error reading sensor %s.", sensor.id_)
                result[sensor.id_] = None
        return result

    @staticmethod
    def _decode(data: bytes) -> str:
        """Decode the bytes to ascii string"""
        try:
            if any(x < 32 for x in data):
                return data.decode("utf-16be").rstrip().replace('\x00', '')
            return data.decode("ascii").rstrip()
        except ValueError:
            return data.hex()