1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396 1397 1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418 1419 1420 1421 1422 1423 1424 1425 1426 1427 1428 1429 1430 1431 1432 1433 1434 1435 1436 1437 1438 1439 1440 1441 1442 1443 1444
|
<html><body>
<style>
body, h1, h2, h3, div, span, p, pre, a {
margin: 0;
padding: 0;
border: 0;
font-weight: inherit;
font-style: inherit;
font-size: 100%;
font-family: inherit;
vertical-align: baseline;
}
body {
font-size: 13px;
padding: 1em;
}
h1 {
font-size: 26px;
margin-bottom: 1em;
}
h2 {
font-size: 24px;
margin-bottom: 1em;
}
h3 {
font-size: 20px;
margin-bottom: 1em;
margin-top: 1em;
}
pre, code {
line-height: 1.5;
font-family: Monaco, 'DejaVu Sans Mono', 'Bitstream Vera Sans Mono', 'Lucida Console', monospace;
}
pre {
margin-top: 0.5em;
}
h1, h2, h3, p {
font-family: Arial, sans serif;
}
h1, h2, h3 {
border-bottom: solid #CCC 1px;
}
.toc_element {
margin-top: 0.5em;
}
.firstline {
margin-left: 2 em;
}
.method {
margin-top: 1em;
border: solid 1px #CCC;
padding: 1em;
background: #EEE;
}
.details {
font-weight: bold;
font-size: 14px;
}
</style>
<h1><a href="compute_beta.html">Compute Engine API</a> . <a href="compute_beta.subnetworks.html">subnetworks</a></h1>
<h2>Instance Methods</h2>
<p class="toc_element">
<code><a href="#aggregatedList">aggregatedList(project, orderBy=None, maxResults=None, pageToken=None, filter=None)</a></code></p>
<p class="firstline">Retrieves an aggregated list of subnetworks.</p>
<p class="toc_element">
<code><a href="#aggregatedList_next">aggregatedList_next(previous_request, previous_response)</a></code></p>
<p class="firstline">Retrieves the next page of results.</p>
<p class="toc_element">
<code><a href="#delete">delete(project, region, subnetwork, requestId=None)</a></code></p>
<p class="firstline">Deletes the specified subnetwork.</p>
<p class="toc_element">
<code><a href="#expandIpCidrRange">expandIpCidrRange(project, region, subnetwork, body, requestId=None)</a></code></p>
<p class="firstline">Expands the IP CIDR range of the subnetwork to a specified value.</p>
<p class="toc_element">
<code><a href="#get">get(project, region, subnetwork)</a></code></p>
<p class="firstline">Returns the specified subnetwork. Gets a list of available subnetworks list() request.</p>
<p class="toc_element">
<code><a href="#getIamPolicy">getIamPolicy(project, region, resource)</a></code></p>
<p class="firstline">Gets the access control policy for a resource. May be empty if no such policy or resource exists.</p>
<p class="toc_element">
<code><a href="#insert">insert(project, region, body, requestId=None)</a></code></p>
<p class="firstline">Creates a subnetwork in the specified project using the data included in the request.</p>
<p class="toc_element">
<code><a href="#list">list(project, region, orderBy=None, maxResults=None, pageToken=None, filter=None)</a></code></p>
<p class="firstline">Retrieves a list of subnetworks available to the specified project.</p>
<p class="toc_element">
<code><a href="#listUsable">listUsable(project, orderBy=None, maxResults=None, pageToken=None, filter=None)</a></code></p>
<p class="firstline">Retrieves an aggregated list of usable subnetworks.</p>
<p class="toc_element">
<code><a href="#listUsable_next">listUsable_next(previous_request, previous_response)</a></code></p>
<p class="firstline">Retrieves the next page of results.</p>
<p class="toc_element">
<code><a href="#list_next">list_next(previous_request, previous_response)</a></code></p>
<p class="firstline">Retrieves the next page of results.</p>
<p class="toc_element">
<code><a href="#patch">patch(project, region, subnetwork, body, drainTimeoutSeconds=None, requestId=None)</a></code></p>
<p class="firstline">Patches the specified subnetwork with the data included in the request. Only certain fields can up updated with a patch request as indicated in the field descriptions. You must specify the current fingeprint of the subnetwork resource being patched.</p>
<p class="toc_element">
<code><a href="#setIamPolicy">setIamPolicy(project, region, resource, body)</a></code></p>
<p class="firstline">Sets the access control policy on the specified resource. Replaces any existing policy.</p>
<p class="toc_element">
<code><a href="#setPrivateIpGoogleAccess">setPrivateIpGoogleAccess(project, region, subnetwork, body, requestId=None)</a></code></p>
<p class="firstline">Set whether VMs in this subnet can access Google services without assigning external IP addresses through Private Google Access.</p>
<p class="toc_element">
<code><a href="#testIamPermissions">testIamPermissions(project, region, resource, body)</a></code></p>
<p class="firstline">Returns permissions that a caller has on the specified resource.</p>
<h3>Method Details</h3>
<div class="method">
<code class="details" id="aggregatedList">aggregatedList(project, orderBy=None, maxResults=None, pageToken=None, filter=None)</code>
<pre>Retrieves an aggregated list of subnetworks.
Args:
project: string, Project ID for this request. (required)
orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name.
You can also sort results in descending order based on the creation timestamp using orderBy="creationTimestamp desc". This sorts results based on the creationTimestamp field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.
Currently, only sorting by name or creationTimestamp desc is supported.
maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than maxResults, Compute Engine returns a nextPageToken that can be used to get the next page of results in subsequent list requests. Acceptable values are 0 to 500, inclusive. (Default: 500)
pageToken: string, Specifies a page token to use. Set pageToken to the nextPageToken returned by a previous list request to get the next page of results.
filter: string, A filter expression that filters resources listed in the response. The expression must specify the field name, a comparison operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The comparison operator must be either =, !=, >, or <.
For example, if you are filtering Compute Engine instances, you can exclude instances named example-instance by specifying name != example-instance.
You can also filter nested fields. For example, you could specify scheduling.automaticRestart = false to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels.
To filter on multiple expressions, provide each separate expression within parentheses. For example, (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake"). By default, each expression is an AND expression. However, you can include AND and OR expressions explicitly. For example, (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true).
Returns:
An object of the form:
{
"nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
"kind": "compute#subnetworkAggregatedList", # [Output Only] Type of resource. Always compute#subnetworkAggregatedList for aggregated lists of subnetworks.
"items": { # A list of SubnetworksScopedList resources.
"a_key": { # Name of the scope containing this set of Subnetworks.
"subnetworks": [ # A list of subnetworks contained in this scope.
{ # Represents a Subnetwork resource.
#
# A subnetwork (also known as a subnet) is a logical partition of a Virtual Private Cloud network with one primary IP range and zero or more secondary IP ranges. For more information, read Virtual Private Cloud (VPC) Network. (== resource_for beta.subnetworks ==) (== resource_for v1.subnetworks ==)
"kind": "compute#subnetwork", # [Output Only] Type of the resource. Always compute#subnetwork for Subnetwork resources.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource. This field can be set only at resource creation time.
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"region": "A String", # URL of the region where the Subnetwork resides. This field can be set only at resource creation time.
"logConfig": { # The available logging options for this subnetwork. # This field denotes the VPC flow logging options for this subnetwork. If logging is enabled, logs are exported to Stackdriver.
"enable": True or False, # Whether to enable flow logging for this subnetwork. If this field is not explicitly set, it will not appear in get listings. If not set the default behavior is to disable flow logging.
"flowSampling": 3.14, # Can only be specified if VPC flow logging for this subnetwork is enabled. The value of the field must be in [0, 1]. Set the sampling rate of VPC flow logs within the subnetwork where 1.0 means all collected logs are reported and 0.0 means no logs are reported. Default is 0.5, which means half of all collected logs are reported.
"aggregationInterval": "A String", # Can only be specified if VPC flow logging for this subnetwork is enabled. Toggles the aggregation interval for collecting flow logs. Increasing the interval time will reduce the amount of generated flow logs for long lasting connections. Default is an interval of 5 seconds per connection.
"metadata": "A String", # Can only be specified if VPC flow logging for this subnetwork is enabled. Configures whether metadata fields should be added to the reported VPC flow logs. Default is INCLUDE_ALL_METADATA.
},
"secondaryIpRanges": [ # An array of configurations for secondary IP ranges for VM instances contained in this subnetwork. The primary IP of such VM must belong to the primary ipCidrRange of the subnetwork. The alias IPs may belong to either primary or secondary ranges. This field can be updated with a patch request.
{ # Represents a secondary IP range of a subnetwork.
"ipCidrRange": "A String", # The range of IP addresses belonging to this subnetwork secondary range. Provide this property when you create the subnetwork. Ranges must be unique and non-overlapping with all primary and secondary IP ranges within a network. Only IPv4 is supported.
"rangeName": "A String", # The name associated with this subnetwork secondary range, used when adding an alias IP range to a VM instance. The name must be 1-63 characters long, and comply with RFC1035. The name must be unique within the subnetwork.
},
],
"network": "A String", # The URL of the network to which this subnetwork belongs, provided by the client when initially creating the subnetwork. Only networks that are in the distributed mode can have subnetworks. This field can be set only at resource creation time.
"state": "A String", # [Output Only] The state of the subnetwork, which can be one of READY or DRAINING. A subnetwork that is READY is ready to be used. The state of DRAINING is only applicable to subnetworks that have the purpose set to INTERNAL_HTTPS_LOAD_BALANCER and indicates that connections to the load balancer are being drained. A subnetwork that is draining cannot be used or modified until it reaches a status of READY.
"role": "A String", # The role of subnetwork. Currenly, this field is only used when purpose = INTERNAL_HTTPS_LOAD_BALANCER. The value can be set to ACTIVE or BACKUP. An ACTIVE subnetwork is one that is currently being used for Internal HTTP(S) Load Balancing. A BACKUP subnetwork is one that is ready to be promoted to ACTIVE or is currently draining. This field can be updated with a patch request.
"purpose": "A String", # The purpose of the resource. This field can be either PRIVATE_RFC_1918 or INTERNAL_HTTPS_LOAD_BALANCER. A subnetwork with purpose set to INTERNAL_HTTPS_LOAD_BALANCER is a user-created subnetwork that is reserved for Internal HTTP(S) Load Balancing. If unspecified, the purpose defaults to PRIVATE_RFC_1918.
"enableFlowLogs": True or False, # Whether to enable flow logging for this subnetwork. If this field is not explicitly set, it will not appear in get listings. If not set the default behavior is to disable flow logging.
"fingerprint": "A String", # Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking. This field will be ignored when inserting a Subnetwork. An up-to-date fingerprint must be provided in order to update the Subnetwork, otherwise the request will fail with error 412 conditionNotMet.
#
# To see the latest fingerprint, make a get() request to retrieve a Subnetwork.
"privateIpGoogleAccess": True or False, # Whether the VMs in this subnet can access Google services without assigned external IP addresses. This field can be both set at resource creation time and updated using setPrivateIpGoogleAccess.
"allowSubnetCidrRoutesOverlap": True or False, # Whether this subnetwork can conflict with static routes. Setting this to true allows this subnetwork's primary and secondary ranges to conflict with routes that have already been configured on the corresponding network. Static routes will take precedence over the subnetwork route if the route prefix length is at least as large as the subnetwork prefix length.
#
# Also, packets destined to IPs within subnetwork may contain private/sensitive data and are prevented from leaving the virtual network. Setting this field to true will disable this feature.
#
# The default value is false and applies to all existing subnetworks and automatically created subnetworks.
#
# This field cannot be set to true at resource creation time.
"ipCidrRange": "A String", # The range of internal addresses that are owned by this subnetwork. Provide this property when you create the subnetwork. For example, 10.0.0.0/8 or 192.168.0.0/16. Ranges must be unique and non-overlapping within a network. Only IPv4 is supported. This field can be set only at resource creation time.
"gatewayAddress": "A String", # [Output Only] The gateway address for default routes to reach destination addresses outside this subnetwork.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"name": "A String", # The name of the resource, provided by the client when initially creating the resource. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
},
],
"warning": { # An informational warning that appears when the list of addresses is empty.
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
},
},
"warning": { # [Output Only] Informational warning message.
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
"id": "A String", # [Output Only] Unique identifier for the resource; defined by the server.
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
}</pre>
</div>
<div class="method">
<code class="details" id="aggregatedList_next">aggregatedList_next(previous_request, previous_response)</code>
<pre>Retrieves the next page of results.
Args:
previous_request: The request for the previous page. (required)
previous_response: The response from the request for the previous page. (required)
Returns:
A request object that you can call 'execute()' on to request the next
page. Returns None if there are no more items in the collection.
</pre>
</div>
<div class="method">
<code class="details" id="delete">delete(project, region, subnetwork, requestId=None)</code>
<pre>Deletes the specified subnetwork.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region scoping this request. (required)
subnetwork: string, Name of the Subnetwork resource to delete. (required)
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the resource.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}</pre>
</div>
<div class="method">
<code class="details" id="expandIpCidrRange">expandIpCidrRange(project, region, subnetwork, body, requestId=None)</code>
<pre>Expands the IP CIDR range of the subnetwork to a specified value.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region scoping this request. (required)
subnetwork: string, Name of the Subnetwork resource to update. (required)
body: object, The request body. (required)
The object takes the form of:
{
"ipCidrRange": "A String", # The IP (in CIDR format or netmask) of internal addresses that are legal on this Subnetwork. This range should be disjoint from other subnetworks within this network. This range can only be larger than (i.e. a superset of) the range previously defined before the update.
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the resource.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}</pre>
</div>
<div class="method">
<code class="details" id="get">get(project, region, subnetwork)</code>
<pre>Returns the specified subnetwork. Gets a list of available subnetworks list() request.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region scoping this request. (required)
subnetwork: string, Name of the Subnetwork resource to return. (required)
Returns:
An object of the form:
{ # Represents a Subnetwork resource.
#
# A subnetwork (also known as a subnet) is a logical partition of a Virtual Private Cloud network with one primary IP range and zero or more secondary IP ranges. For more information, read Virtual Private Cloud (VPC) Network. (== resource_for beta.subnetworks ==) (== resource_for v1.subnetworks ==)
"kind": "compute#subnetwork", # [Output Only] Type of the resource. Always compute#subnetwork for Subnetwork resources.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource. This field can be set only at resource creation time.
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"region": "A String", # URL of the region where the Subnetwork resides. This field can be set only at resource creation time.
"logConfig": { # The available logging options for this subnetwork. # This field denotes the VPC flow logging options for this subnetwork. If logging is enabled, logs are exported to Stackdriver.
"enable": True or False, # Whether to enable flow logging for this subnetwork. If this field is not explicitly set, it will not appear in get listings. If not set the default behavior is to disable flow logging.
"flowSampling": 3.14, # Can only be specified if VPC flow logging for this subnetwork is enabled. The value of the field must be in [0, 1]. Set the sampling rate of VPC flow logs within the subnetwork where 1.0 means all collected logs are reported and 0.0 means no logs are reported. Default is 0.5, which means half of all collected logs are reported.
"aggregationInterval": "A String", # Can only be specified if VPC flow logging for this subnetwork is enabled. Toggles the aggregation interval for collecting flow logs. Increasing the interval time will reduce the amount of generated flow logs for long lasting connections. Default is an interval of 5 seconds per connection.
"metadata": "A String", # Can only be specified if VPC flow logging for this subnetwork is enabled. Configures whether metadata fields should be added to the reported VPC flow logs. Default is INCLUDE_ALL_METADATA.
},
"secondaryIpRanges": [ # An array of configurations for secondary IP ranges for VM instances contained in this subnetwork. The primary IP of such VM must belong to the primary ipCidrRange of the subnetwork. The alias IPs may belong to either primary or secondary ranges. This field can be updated with a patch request.
{ # Represents a secondary IP range of a subnetwork.
"ipCidrRange": "A String", # The range of IP addresses belonging to this subnetwork secondary range. Provide this property when you create the subnetwork. Ranges must be unique and non-overlapping with all primary and secondary IP ranges within a network. Only IPv4 is supported.
"rangeName": "A String", # The name associated with this subnetwork secondary range, used when adding an alias IP range to a VM instance. The name must be 1-63 characters long, and comply with RFC1035. The name must be unique within the subnetwork.
},
],
"network": "A String", # The URL of the network to which this subnetwork belongs, provided by the client when initially creating the subnetwork. Only networks that are in the distributed mode can have subnetworks. This field can be set only at resource creation time.
"state": "A String", # [Output Only] The state of the subnetwork, which can be one of READY or DRAINING. A subnetwork that is READY is ready to be used. The state of DRAINING is only applicable to subnetworks that have the purpose set to INTERNAL_HTTPS_LOAD_BALANCER and indicates that connections to the load balancer are being drained. A subnetwork that is draining cannot be used or modified until it reaches a status of READY.
"role": "A String", # The role of subnetwork. Currenly, this field is only used when purpose = INTERNAL_HTTPS_LOAD_BALANCER. The value can be set to ACTIVE or BACKUP. An ACTIVE subnetwork is one that is currently being used for Internal HTTP(S) Load Balancing. A BACKUP subnetwork is one that is ready to be promoted to ACTIVE or is currently draining. This field can be updated with a patch request.
"purpose": "A String", # The purpose of the resource. This field can be either PRIVATE_RFC_1918 or INTERNAL_HTTPS_LOAD_BALANCER. A subnetwork with purpose set to INTERNAL_HTTPS_LOAD_BALANCER is a user-created subnetwork that is reserved for Internal HTTP(S) Load Balancing. If unspecified, the purpose defaults to PRIVATE_RFC_1918.
"enableFlowLogs": True or False, # Whether to enable flow logging for this subnetwork. If this field is not explicitly set, it will not appear in get listings. If not set the default behavior is to disable flow logging.
"fingerprint": "A String", # Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking. This field will be ignored when inserting a Subnetwork. An up-to-date fingerprint must be provided in order to update the Subnetwork, otherwise the request will fail with error 412 conditionNotMet.
#
# To see the latest fingerprint, make a get() request to retrieve a Subnetwork.
"privateIpGoogleAccess": True or False, # Whether the VMs in this subnet can access Google services without assigned external IP addresses. This field can be both set at resource creation time and updated using setPrivateIpGoogleAccess.
"allowSubnetCidrRoutesOverlap": True or False, # Whether this subnetwork can conflict with static routes. Setting this to true allows this subnetwork's primary and secondary ranges to conflict with routes that have already been configured on the corresponding network. Static routes will take precedence over the subnetwork route if the route prefix length is at least as large as the subnetwork prefix length.
#
# Also, packets destined to IPs within subnetwork may contain private/sensitive data and are prevented from leaving the virtual network. Setting this field to true will disable this feature.
#
# The default value is false and applies to all existing subnetworks and automatically created subnetworks.
#
# This field cannot be set to true at resource creation time.
"ipCidrRange": "A String", # The range of internal addresses that are owned by this subnetwork. Provide this property when you create the subnetwork. For example, 10.0.0.0/8 or 192.168.0.0/16. Ranges must be unique and non-overlapping within a network. Only IPv4 is supported. This field can be set only at resource creation time.
"gatewayAddress": "A String", # [Output Only] The gateway address for default routes to reach destination addresses outside this subnetwork.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"name": "A String", # The name of the resource, provided by the client when initially creating the resource. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
}</pre>
</div>
<div class="method">
<code class="details" id="getIamPolicy">getIamPolicy(project, region, resource)</code>
<pre>Gets the access control policy for a resource. May be empty if no such policy or resource exists.
Args:
project: string, Project ID for this request. (required)
region: string, The name of the region for this request. (required)
resource: string, Name or id of the resource for this request. (required)
Returns:
An object of the form:
{ # Defines an Identity and Access Management (IAM) policy. It is used to specify access control policies for Cloud Platform resources.
#
#
#
# A `Policy` consists of a list of `bindings`. A `binding` binds a list of `members` to a `role`, where the members can be user accounts, Google groups, Google domains, and service accounts. A `role` is a named list of permissions defined by IAM.
#
# **JSON Example**
#
# { "bindings": [ { "role": "roles/owner", "members": [ "user:mike@example.com", "group:admins@example.com", "domain:google.com", "serviceAccount:my-other-app@appspot.gserviceaccount.com" ] }, { "role": "roles/viewer", "members": ["user:sean@example.com"] } ] }
#
# **YAML Example**
#
# bindings: - members: - user:mike@example.com - group:admins@example.com - domain:google.com - serviceAccount:my-other-app@appspot.gserviceaccount.com role: roles/owner - members: - user:sean@example.com role: roles/viewer
#
#
#
# For a description of IAM and its features, see the [IAM developer's guide](https://cloud.google.com/iam/docs).
"auditConfigs": [ # Specifies cloud audit logging configuration for this policy.
{ # Specifies the audit configuration for a service. The configuration determines which permission types are logged, and what identities, if any, are exempted from logging. An AuditConfig must have one or more AuditLogConfigs.
#
# If there are AuditConfigs for both `allServices` and a specific service, the union of the two AuditConfigs is used for that service: the log_types specified in each AuditConfig are enabled, and the exempted_members in each AuditLogConfig are exempted.
#
# Example Policy with multiple AuditConfigs:
#
# { "audit_configs": [ { "service": "allServices" "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:foo@gmail.com" ] }, { "log_type": "DATA_WRITE", }, { "log_type": "ADMIN_READ", } ] }, { "service": "fooservice.googleapis.com" "audit_log_configs": [ { "log_type": "DATA_READ", }, { "log_type": "DATA_WRITE", "exempted_members": [ "user:bar@gmail.com" ] } ] } ] }
#
# For fooservice, this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also exempts foo@gmail.com from DATA_READ logging, and bar@gmail.com from DATA_WRITE logging.
"exemptedMembers": [
"A String",
],
"auditLogConfigs": [ # The configuration for logging of each type of permission.
{ # Provides the configuration for logging a type of permissions. Example:
#
# { "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:foo@gmail.com" ] }, { "log_type": "DATA_WRITE", } ] }
#
# This enables 'DATA_READ' and 'DATA_WRITE' logging, while exempting foo@gmail.com from DATA_READ logging.
"exemptedMembers": [ # Specifies the identities that do not cause logging for this type of permission. Follows the same format of [Binding.members][].
"A String",
],
"logType": "A String", # The log type that this config enables.
},
],
"service": "A String", # Specifies a service that will be enabled for audit logging. For example, `storage.googleapis.com`, `cloudsql.googleapis.com`. `allServices` is a special value that covers all services.
},
],
"rules": [ # If more than one rule is specified, the rules are applied in the following manner: - All matching LOG rules are always applied. - If any DENY/DENY_WITH_LOG rule matches, permission is denied. Logging will be applied if one or more matching rule requires logging. - Otherwise, if any ALLOW/ALLOW_WITH_LOG rule matches, permission is granted. Logging will be applied if one or more matching rule requires logging. - Otherwise, if no rule applies, permission is denied.
{ # A rule to be applied in a Policy.
"logConfigs": [ # The config returned to callers of tech.iam.IAM.CheckPolicy for any entries that match the LOG action.
{ # Specifies what kind of log the caller must write
"counter": { # Increment a streamz counter with the specified metric and field names. # Counter options.
#
# Metric names should start with a '/', generally be lowercase-only, and end in "_count". Field names should not contain an initial slash. The actual exported metric names will have "/iam/policy" prepended.
#
# Field names correspond to IAM request parameters and field values are their respective values.
#
# Supported field names: - "authority", which is "[token]" if IAMContext.token is present, otherwise the value of IAMContext.authority_selector if present, and otherwise a representation of IAMContext.principal; or - "iam_principal", a representation of IAMContext.principal even if a token or authority selector is present; or - "" (empty string), resulting in a counter with no fields.
#
# Examples: counter { metric: "/debug_access_count" field: "iam_principal" } ==> increment counter /iam/policy/backend_debug_access_count {iam_principal=[value of IAMContext.principal]}
#
# At this time we do not support multiple field names (though this may be supported in the future).
"field": "A String", # The field value to attribute.
"metric": "A String", # The metric to update.
},
"dataAccess": { # Write a Data Access (Gin) log # Data access options.
"logMode": "A String", # Whether Gin logging should happen in a fail-closed manner at the caller. This is relevant only in the LocalIAM implementation, for now.
},
"cloudAudit": { # Write a Cloud Audit log # Cloud audit options.
"logName": "A String", # The log_name to populate in the Cloud Audit Record.
"authorizationLoggingOptions": { # Authorization-related information used by Cloud Audit Logging. # Information used by the Cloud Audit Logging pipeline.
"permissionType": "A String", # The type of the permission that was checked.
},
},
},
],
"notIns": [ # If one or more 'not_in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in none of the entries.
"A String",
],
"ins": [ # If one or more 'in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in at least one of these entries.
"A String",
],
"action": "A String", # Required
"permissions": [ # A permission is a string of form '..' (e.g., 'storage.buckets.list'). A value of '*' matches all permissions, and a verb part of '*' (e.g., 'storage.buckets.*') matches all verbs.
"A String",
],
"conditions": [ # Additional restrictions that must be met. All conditions must pass for the rule to match.
{ # A condition to be met.
"iam": "A String", # Trusted attributes supplied by the IAM system.
"sys": "A String", # Trusted attributes supplied by any service that owns resources and uses the IAM system for access control.
"values": [ # The objects of the condition.
"A String",
],
"svc": "A String", # Trusted attributes discharged by the service.
"op": "A String", # An operator to apply the subject with.
},
],
"description": "A String", # Human-readable description of the rule.
},
],
"version": 42, # Deprecated.
"etag": "A String", # `etag` is used for optimistic concurrency control as a way to help prevent simultaneous updates of a policy from overwriting each other. It is strongly suggested that systems make use of the `etag` in the read-modify-write cycle to perform policy updates in order to avoid race conditions: An `etag` is returned in the response to `getIamPolicy`, and systems are expected to put that etag in the request to `setIamPolicy` to ensure that their change will be applied to the same version of the policy.
#
# If no `etag` is provided in the call to `setIamPolicy`, then the existing policy is overwritten blindly.
"bindings": [ # Associates a list of `members` to a `role`. `bindings` with no members will result in an error.
{ # Associates `members` with a `role`.
"role": "A String", # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`, or `roles/owner`.
"members": [ # Specifies the identities requesting access for a Cloud Platform resource. `members` can have the following values:
#
# * `allUsers`: A special identifier that represents anyone who is on the internet; with or without a Google account.
#
# * `allAuthenticatedUsers`: A special identifier that represents anyone who is authenticated with a Google account or a service account.
#
# * `user:{emailid}`: An email address that represents a specific Google account. For example, `alice@gmail.com` .
#
#
#
# * `serviceAccount:{emailid}`: An email address that represents a service account. For example, `my-other-app@appspot.gserviceaccount.com`.
#
# * `group:{emailid}`: An email address that represents a Google group. For example, `admins@example.com`.
#
#
#
# * `domain:{domain}`: The G Suite domain (primary) that represents all the users of that domain. For example, `google.com` or `example.com`.
"A String",
],
"condition": { # Represents an expression text. Example: # The condition that is associated with this binding. NOTE: An unsatisfied condition will not allow user access via current binding. Different bindings, including their conditions, are examined independently.
#
# title: "User account presence" description: "Determines whether the request has a user account" expression: "size(request.user) > 0"
"title": "A String", # An optional title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
#
# The application context of the containing message determines which well-known feature set of CEL is supported.
"description": "A String", # An optional description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"location": "A String", # An optional string indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
},
},
],
"iamOwned": True or False,
}</pre>
</div>
<div class="method">
<code class="details" id="insert">insert(project, region, body, requestId=None)</code>
<pre>Creates a subnetwork in the specified project using the data included in the request.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region scoping this request. (required)
body: object, The request body. (required)
The object takes the form of:
{ # Represents a Subnetwork resource.
#
# A subnetwork (also known as a subnet) is a logical partition of a Virtual Private Cloud network with one primary IP range and zero or more secondary IP ranges. For more information, read Virtual Private Cloud (VPC) Network. (== resource_for beta.subnetworks ==) (== resource_for v1.subnetworks ==)
"kind": "compute#subnetwork", # [Output Only] Type of the resource. Always compute#subnetwork for Subnetwork resources.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource. This field can be set only at resource creation time.
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"region": "A String", # URL of the region where the Subnetwork resides. This field can be set only at resource creation time.
"logConfig": { # The available logging options for this subnetwork. # This field denotes the VPC flow logging options for this subnetwork. If logging is enabled, logs are exported to Stackdriver.
"enable": True or False, # Whether to enable flow logging for this subnetwork. If this field is not explicitly set, it will not appear in get listings. If not set the default behavior is to disable flow logging.
"flowSampling": 3.14, # Can only be specified if VPC flow logging for this subnetwork is enabled. The value of the field must be in [0, 1]. Set the sampling rate of VPC flow logs within the subnetwork where 1.0 means all collected logs are reported and 0.0 means no logs are reported. Default is 0.5, which means half of all collected logs are reported.
"aggregationInterval": "A String", # Can only be specified if VPC flow logging for this subnetwork is enabled. Toggles the aggregation interval for collecting flow logs. Increasing the interval time will reduce the amount of generated flow logs for long lasting connections. Default is an interval of 5 seconds per connection.
"metadata": "A String", # Can only be specified if VPC flow logging for this subnetwork is enabled. Configures whether metadata fields should be added to the reported VPC flow logs. Default is INCLUDE_ALL_METADATA.
},
"secondaryIpRanges": [ # An array of configurations for secondary IP ranges for VM instances contained in this subnetwork. The primary IP of such VM must belong to the primary ipCidrRange of the subnetwork. The alias IPs may belong to either primary or secondary ranges. This field can be updated with a patch request.
{ # Represents a secondary IP range of a subnetwork.
"ipCidrRange": "A String", # The range of IP addresses belonging to this subnetwork secondary range. Provide this property when you create the subnetwork. Ranges must be unique and non-overlapping with all primary and secondary IP ranges within a network. Only IPv4 is supported.
"rangeName": "A String", # The name associated with this subnetwork secondary range, used when adding an alias IP range to a VM instance. The name must be 1-63 characters long, and comply with RFC1035. The name must be unique within the subnetwork.
},
],
"network": "A String", # The URL of the network to which this subnetwork belongs, provided by the client when initially creating the subnetwork. Only networks that are in the distributed mode can have subnetworks. This field can be set only at resource creation time.
"state": "A String", # [Output Only] The state of the subnetwork, which can be one of READY or DRAINING. A subnetwork that is READY is ready to be used. The state of DRAINING is only applicable to subnetworks that have the purpose set to INTERNAL_HTTPS_LOAD_BALANCER and indicates that connections to the load balancer are being drained. A subnetwork that is draining cannot be used or modified until it reaches a status of READY.
"role": "A String", # The role of subnetwork. Currenly, this field is only used when purpose = INTERNAL_HTTPS_LOAD_BALANCER. The value can be set to ACTIVE or BACKUP. An ACTIVE subnetwork is one that is currently being used for Internal HTTP(S) Load Balancing. A BACKUP subnetwork is one that is ready to be promoted to ACTIVE or is currently draining. This field can be updated with a patch request.
"purpose": "A String", # The purpose of the resource. This field can be either PRIVATE_RFC_1918 or INTERNAL_HTTPS_LOAD_BALANCER. A subnetwork with purpose set to INTERNAL_HTTPS_LOAD_BALANCER is a user-created subnetwork that is reserved for Internal HTTP(S) Load Balancing. If unspecified, the purpose defaults to PRIVATE_RFC_1918.
"enableFlowLogs": True or False, # Whether to enable flow logging for this subnetwork. If this field is not explicitly set, it will not appear in get listings. If not set the default behavior is to disable flow logging.
"fingerprint": "A String", # Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking. This field will be ignored when inserting a Subnetwork. An up-to-date fingerprint must be provided in order to update the Subnetwork, otherwise the request will fail with error 412 conditionNotMet.
#
# To see the latest fingerprint, make a get() request to retrieve a Subnetwork.
"privateIpGoogleAccess": True or False, # Whether the VMs in this subnet can access Google services without assigned external IP addresses. This field can be both set at resource creation time and updated using setPrivateIpGoogleAccess.
"allowSubnetCidrRoutesOverlap": True or False, # Whether this subnetwork can conflict with static routes. Setting this to true allows this subnetwork's primary and secondary ranges to conflict with routes that have already been configured on the corresponding network. Static routes will take precedence over the subnetwork route if the route prefix length is at least as large as the subnetwork prefix length.
#
# Also, packets destined to IPs within subnetwork may contain private/sensitive data and are prevented from leaving the virtual network. Setting this field to true will disable this feature.
#
# The default value is false and applies to all existing subnetworks and automatically created subnetworks.
#
# This field cannot be set to true at resource creation time.
"ipCidrRange": "A String", # The range of internal addresses that are owned by this subnetwork. Provide this property when you create the subnetwork. For example, 10.0.0.0/8 or 192.168.0.0/16. Ranges must be unique and non-overlapping within a network. Only IPv4 is supported. This field can be set only at resource creation time.
"gatewayAddress": "A String", # [Output Only] The gateway address for default routes to reach destination addresses outside this subnetwork.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"name": "A String", # The name of the resource, provided by the client when initially creating the resource. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the resource.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}</pre>
</div>
<div class="method">
<code class="details" id="list">list(project, region, orderBy=None, maxResults=None, pageToken=None, filter=None)</code>
<pre>Retrieves a list of subnetworks available to the specified project.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region scoping this request. (required)
orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name.
You can also sort results in descending order based on the creation timestamp using orderBy="creationTimestamp desc". This sorts results based on the creationTimestamp field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.
Currently, only sorting by name or creationTimestamp desc is supported.
maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than maxResults, Compute Engine returns a nextPageToken that can be used to get the next page of results in subsequent list requests. Acceptable values are 0 to 500, inclusive. (Default: 500)
pageToken: string, Specifies a page token to use. Set pageToken to the nextPageToken returned by a previous list request to get the next page of results.
filter: string, A filter expression that filters resources listed in the response. The expression must specify the field name, a comparison operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The comparison operator must be either =, !=, >, or <.
For example, if you are filtering Compute Engine instances, you can exclude instances named example-instance by specifying name != example-instance.
You can also filter nested fields. For example, you could specify scheduling.automaticRestart = false to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels.
To filter on multiple expressions, provide each separate expression within parentheses. For example, (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake"). By default, each expression is an AND expression. However, you can include AND and OR expressions explicitly. For example, (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true).
Returns:
An object of the form:
{ # Contains a list of Subnetwork resources.
"nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
"kind": "compute#subnetworkList", # [Output Only] Type of resource. Always compute#subnetworkList for lists of subnetworks.
"items": [ # A list of Subnetwork resources.
{ # Represents a Subnetwork resource.
#
# A subnetwork (also known as a subnet) is a logical partition of a Virtual Private Cloud network with one primary IP range and zero or more secondary IP ranges. For more information, read Virtual Private Cloud (VPC) Network. (== resource_for beta.subnetworks ==) (== resource_for v1.subnetworks ==)
"kind": "compute#subnetwork", # [Output Only] Type of the resource. Always compute#subnetwork for Subnetwork resources.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource. This field can be set only at resource creation time.
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"region": "A String", # URL of the region where the Subnetwork resides. This field can be set only at resource creation time.
"logConfig": { # The available logging options for this subnetwork. # This field denotes the VPC flow logging options for this subnetwork. If logging is enabled, logs are exported to Stackdriver.
"enable": True or False, # Whether to enable flow logging for this subnetwork. If this field is not explicitly set, it will not appear in get listings. If not set the default behavior is to disable flow logging.
"flowSampling": 3.14, # Can only be specified if VPC flow logging for this subnetwork is enabled. The value of the field must be in [0, 1]. Set the sampling rate of VPC flow logs within the subnetwork where 1.0 means all collected logs are reported and 0.0 means no logs are reported. Default is 0.5, which means half of all collected logs are reported.
"aggregationInterval": "A String", # Can only be specified if VPC flow logging for this subnetwork is enabled. Toggles the aggregation interval for collecting flow logs. Increasing the interval time will reduce the amount of generated flow logs for long lasting connections. Default is an interval of 5 seconds per connection.
"metadata": "A String", # Can only be specified if VPC flow logging for this subnetwork is enabled. Configures whether metadata fields should be added to the reported VPC flow logs. Default is INCLUDE_ALL_METADATA.
},
"secondaryIpRanges": [ # An array of configurations for secondary IP ranges for VM instances contained in this subnetwork. The primary IP of such VM must belong to the primary ipCidrRange of the subnetwork. The alias IPs may belong to either primary or secondary ranges. This field can be updated with a patch request.
{ # Represents a secondary IP range of a subnetwork.
"ipCidrRange": "A String", # The range of IP addresses belonging to this subnetwork secondary range. Provide this property when you create the subnetwork. Ranges must be unique and non-overlapping with all primary and secondary IP ranges within a network. Only IPv4 is supported.
"rangeName": "A String", # The name associated with this subnetwork secondary range, used when adding an alias IP range to a VM instance. The name must be 1-63 characters long, and comply with RFC1035. The name must be unique within the subnetwork.
},
],
"network": "A String", # The URL of the network to which this subnetwork belongs, provided by the client when initially creating the subnetwork. Only networks that are in the distributed mode can have subnetworks. This field can be set only at resource creation time.
"state": "A String", # [Output Only] The state of the subnetwork, which can be one of READY or DRAINING. A subnetwork that is READY is ready to be used. The state of DRAINING is only applicable to subnetworks that have the purpose set to INTERNAL_HTTPS_LOAD_BALANCER and indicates that connections to the load balancer are being drained. A subnetwork that is draining cannot be used or modified until it reaches a status of READY.
"role": "A String", # The role of subnetwork. Currenly, this field is only used when purpose = INTERNAL_HTTPS_LOAD_BALANCER. The value can be set to ACTIVE or BACKUP. An ACTIVE subnetwork is one that is currently being used for Internal HTTP(S) Load Balancing. A BACKUP subnetwork is one that is ready to be promoted to ACTIVE or is currently draining. This field can be updated with a patch request.
"purpose": "A String", # The purpose of the resource. This field can be either PRIVATE_RFC_1918 or INTERNAL_HTTPS_LOAD_BALANCER. A subnetwork with purpose set to INTERNAL_HTTPS_LOAD_BALANCER is a user-created subnetwork that is reserved for Internal HTTP(S) Load Balancing. If unspecified, the purpose defaults to PRIVATE_RFC_1918.
"enableFlowLogs": True or False, # Whether to enable flow logging for this subnetwork. If this field is not explicitly set, it will not appear in get listings. If not set the default behavior is to disable flow logging.
"fingerprint": "A String", # Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking. This field will be ignored when inserting a Subnetwork. An up-to-date fingerprint must be provided in order to update the Subnetwork, otherwise the request will fail with error 412 conditionNotMet.
#
# To see the latest fingerprint, make a get() request to retrieve a Subnetwork.
"privateIpGoogleAccess": True or False, # Whether the VMs in this subnet can access Google services without assigned external IP addresses. This field can be both set at resource creation time and updated using setPrivateIpGoogleAccess.
"allowSubnetCidrRoutesOverlap": True or False, # Whether this subnetwork can conflict with static routes. Setting this to true allows this subnetwork's primary and secondary ranges to conflict with routes that have already been configured on the corresponding network. Static routes will take precedence over the subnetwork route if the route prefix length is at least as large as the subnetwork prefix length.
#
# Also, packets destined to IPs within subnetwork may contain private/sensitive data and are prevented from leaving the virtual network. Setting this field to true will disable this feature.
#
# The default value is false and applies to all existing subnetworks and automatically created subnetworks.
#
# This field cannot be set to true at resource creation time.
"ipCidrRange": "A String", # The range of internal addresses that are owned by this subnetwork. Provide this property when you create the subnetwork. For example, 10.0.0.0/8 or 192.168.0.0/16. Ranges must be unique and non-overlapping within a network. Only IPv4 is supported. This field can be set only at resource creation time.
"gatewayAddress": "A String", # [Output Only] The gateway address for default routes to reach destination addresses outside this subnetwork.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"name": "A String", # The name of the resource, provided by the client when initially creating the resource. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
},
],
"warning": { # [Output Only] Informational warning message.
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
"id": "A String", # [Output Only] Unique identifier for the resource; defined by the server.
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
}</pre>
</div>
<div class="method">
<code class="details" id="listUsable">listUsable(project, orderBy=None, maxResults=None, pageToken=None, filter=None)</code>
<pre>Retrieves an aggregated list of usable subnetworks.
Args:
project: string, Project ID for this request. (required)
orderBy: string, Sorts list results by a certain order. By default, results are returned in alphanumerical order based on the resource name.
You can also sort results in descending order based on the creation timestamp using orderBy="creationTimestamp desc". This sorts results based on the creationTimestamp field in reverse chronological order (newest result first). Use this to sort resources like operations so that the newest operation is returned first.
Currently, only sorting by name or creationTimestamp desc is supported.
maxResults: integer, The maximum number of results per page that should be returned. If the number of available results is larger than maxResults, Compute Engine returns a nextPageToken that can be used to get the next page of results in subsequent list requests. Acceptable values are 0 to 500, inclusive. (Default: 500)
pageToken: string, Specifies a page token to use. Set pageToken to the nextPageToken returned by a previous list request to get the next page of results.
filter: string, A filter expression that filters resources listed in the response. The expression must specify the field name, a comparison operator, and the value that you want to use for filtering. The value must be a string, a number, or a boolean. The comparison operator must be either =, !=, >, or <.
For example, if you are filtering Compute Engine instances, you can exclude instances named example-instance by specifying name != example-instance.
You can also filter nested fields. For example, you could specify scheduling.automaticRestart = false to include instances only if they are not scheduled for automatic restarts. You can use filtering on nested fields to filter based on resource labels.
To filter on multiple expressions, provide each separate expression within parentheses. For example, (scheduling.automaticRestart = true) (cpuPlatform = "Intel Skylake"). By default, each expression is an AND expression. However, you can include AND and OR expressions explicitly. For example, (cpuPlatform = "Intel Skylake") OR (cpuPlatform = "Intel Broadwell") AND (scheduling.automaticRestart = true).
Returns:
An object of the form:
{
"nextPageToken": "A String", # [Output Only] This token allows you to get the next page of results for list requests. If the number of results is larger than maxResults, use the nextPageToken as a value for the query parameter pageToken in the next list request. Subsequent list requests will have their own nextPageToken to continue paging through the results.
"kind": "compute#usableSubnetworksAggregatedList", # [Output Only] Type of resource. Always compute#usableSubnetworksAggregatedList for aggregated lists of usable subnetworks.
"items": [ # [Output] A list of usable subnetwork URLs.
{ # Subnetwork which the current user has compute.subnetworks.use permission on.
"secondaryIpRanges": [ # Secondary IP ranges.
{ # Secondary IP range of a usable subnetwork.
"ipCidrRange": "A String", # The range of IP addresses belonging to this subnetwork secondary range.
"rangeName": "A String", # The name associated with this subnetwork secondary range, used when adding an alias IP range to a VM instance. The name must be 1-63 characters long, and comply with RFC1035. The name must be unique within the subnetwork.
},
],
"ipCidrRange": "A String", # The range of internal addresses that are owned by this subnetwork.
"network": "A String", # Network URL.
"subnetwork": "A String", # Subnetwork URL.
},
],
"warning": { # [Output Only] Informational warning message.
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"selfLink": "A String", # [Output Only] Server-defined URL for this resource.
}</pre>
</div>
<div class="method">
<code class="details" id="listUsable_next">listUsable_next(previous_request, previous_response)</code>
<pre>Retrieves the next page of results.
Args:
previous_request: The request for the previous page. (required)
previous_response: The response from the request for the previous page. (required)
Returns:
A request object that you can call 'execute()' on to request the next
page. Returns None if there are no more items in the collection.
</pre>
</div>
<div class="method">
<code class="details" id="list_next">list_next(previous_request, previous_response)</code>
<pre>Retrieves the next page of results.
Args:
previous_request: The request for the previous page. (required)
previous_response: The response from the request for the previous page. (required)
Returns:
A request object that you can call 'execute()' on to request the next
page. Returns None if there are no more items in the collection.
</pre>
</div>
<div class="method">
<code class="details" id="patch">patch(project, region, subnetwork, body, drainTimeoutSeconds=None, requestId=None)</code>
<pre>Patches the specified subnetwork with the data included in the request. Only certain fields can up updated with a patch request as indicated in the field descriptions. You must specify the current fingeprint of the subnetwork resource being patched.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region scoping this request. (required)
subnetwork: string, Name of the Subnetwork resource to patch. (required)
body: object, The request body. (required)
The object takes the form of:
{ # Represents a Subnetwork resource.
#
# A subnetwork (also known as a subnet) is a logical partition of a Virtual Private Cloud network with one primary IP range and zero or more secondary IP ranges. For more information, read Virtual Private Cloud (VPC) Network. (== resource_for beta.subnetworks ==) (== resource_for v1.subnetworks ==)
"kind": "compute#subnetwork", # [Output Only] Type of the resource. Always compute#subnetwork for Subnetwork resources.
"description": "A String", # An optional description of this resource. Provide this property when you create the resource. This field can be set only at resource creation time.
"creationTimestamp": "A String", # [Output Only] Creation timestamp in RFC3339 text format.
"region": "A String", # URL of the region where the Subnetwork resides. This field can be set only at resource creation time.
"logConfig": { # The available logging options for this subnetwork. # This field denotes the VPC flow logging options for this subnetwork. If logging is enabled, logs are exported to Stackdriver.
"enable": True or False, # Whether to enable flow logging for this subnetwork. If this field is not explicitly set, it will not appear in get listings. If not set the default behavior is to disable flow logging.
"flowSampling": 3.14, # Can only be specified if VPC flow logging for this subnetwork is enabled. The value of the field must be in [0, 1]. Set the sampling rate of VPC flow logs within the subnetwork where 1.0 means all collected logs are reported and 0.0 means no logs are reported. Default is 0.5, which means half of all collected logs are reported.
"aggregationInterval": "A String", # Can only be specified if VPC flow logging for this subnetwork is enabled. Toggles the aggregation interval for collecting flow logs. Increasing the interval time will reduce the amount of generated flow logs for long lasting connections. Default is an interval of 5 seconds per connection.
"metadata": "A String", # Can only be specified if VPC flow logging for this subnetwork is enabled. Configures whether metadata fields should be added to the reported VPC flow logs. Default is INCLUDE_ALL_METADATA.
},
"secondaryIpRanges": [ # An array of configurations for secondary IP ranges for VM instances contained in this subnetwork. The primary IP of such VM must belong to the primary ipCidrRange of the subnetwork. The alias IPs may belong to either primary or secondary ranges. This field can be updated with a patch request.
{ # Represents a secondary IP range of a subnetwork.
"ipCidrRange": "A String", # The range of IP addresses belonging to this subnetwork secondary range. Provide this property when you create the subnetwork. Ranges must be unique and non-overlapping with all primary and secondary IP ranges within a network. Only IPv4 is supported.
"rangeName": "A String", # The name associated with this subnetwork secondary range, used when adding an alias IP range to a VM instance. The name must be 1-63 characters long, and comply with RFC1035. The name must be unique within the subnetwork.
},
],
"network": "A String", # The URL of the network to which this subnetwork belongs, provided by the client when initially creating the subnetwork. Only networks that are in the distributed mode can have subnetworks. This field can be set only at resource creation time.
"state": "A String", # [Output Only] The state of the subnetwork, which can be one of READY or DRAINING. A subnetwork that is READY is ready to be used. The state of DRAINING is only applicable to subnetworks that have the purpose set to INTERNAL_HTTPS_LOAD_BALANCER and indicates that connections to the load balancer are being drained. A subnetwork that is draining cannot be used or modified until it reaches a status of READY.
"role": "A String", # The role of subnetwork. Currenly, this field is only used when purpose = INTERNAL_HTTPS_LOAD_BALANCER. The value can be set to ACTIVE or BACKUP. An ACTIVE subnetwork is one that is currently being used for Internal HTTP(S) Load Balancing. A BACKUP subnetwork is one that is ready to be promoted to ACTIVE or is currently draining. This field can be updated with a patch request.
"purpose": "A String", # The purpose of the resource. This field can be either PRIVATE_RFC_1918 or INTERNAL_HTTPS_LOAD_BALANCER. A subnetwork with purpose set to INTERNAL_HTTPS_LOAD_BALANCER is a user-created subnetwork that is reserved for Internal HTTP(S) Load Balancing. If unspecified, the purpose defaults to PRIVATE_RFC_1918.
"enableFlowLogs": True or False, # Whether to enable flow logging for this subnetwork. If this field is not explicitly set, it will not appear in get listings. If not set the default behavior is to disable flow logging.
"fingerprint": "A String", # Fingerprint of this resource. A hash of the contents stored in this object. This field is used in optimistic locking. This field will be ignored when inserting a Subnetwork. An up-to-date fingerprint must be provided in order to update the Subnetwork, otherwise the request will fail with error 412 conditionNotMet.
#
# To see the latest fingerprint, make a get() request to retrieve a Subnetwork.
"privateIpGoogleAccess": True or False, # Whether the VMs in this subnet can access Google services without assigned external IP addresses. This field can be both set at resource creation time and updated using setPrivateIpGoogleAccess.
"allowSubnetCidrRoutesOverlap": True or False, # Whether this subnetwork can conflict with static routes. Setting this to true allows this subnetwork's primary and secondary ranges to conflict with routes that have already been configured on the corresponding network. Static routes will take precedence over the subnetwork route if the route prefix length is at least as large as the subnetwork prefix length.
#
# Also, packets destined to IPs within subnetwork may contain private/sensitive data and are prevented from leaving the virtual network. Setting this field to true will disable this feature.
#
# The default value is false and applies to all existing subnetworks and automatically created subnetworks.
#
# This field cannot be set to true at resource creation time.
"ipCidrRange": "A String", # The range of internal addresses that are owned by this subnetwork. Provide this property when you create the subnetwork. For example, 10.0.0.0/8 or 192.168.0.0/16. Ranges must be unique and non-overlapping within a network. Only IPv4 is supported. This field can be set only at resource creation time.
"gatewayAddress": "A String", # [Output Only] The gateway address for default routes to reach destination addresses outside this subnetwork.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"name": "A String", # The name of the resource, provided by the client when initially creating the resource. The name must be 1-63 characters long, and comply with RFC1035. Specifically, the name must be 1-63 characters long and match the regular expression `[a-z]([-a-z0-9]*[a-z0-9])?` which means the first character must be a lowercase letter, and all following characters must be a dash, lowercase letter, or digit, except the last character, which cannot be a dash.
}
drainTimeoutSeconds: integer, The drain timeout specifies the upper bound in seconds on the amount of time allowed to drain connections from the current ACTIVE subnetwork to the current BACKUP subnetwork. The drain timeout is only applicable when the following conditions are true: - the subnetwork being patched has purpose = INTERNAL_HTTPS_LOAD_BALANCER - the subnetwork being patched has role = BACKUP - the patch request is setting the role to ACTIVE. Note that after this patch operation the roles of the ACTIVE and BACKUP subnetworks will be swapped.
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the resource.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}</pre>
</div>
<div class="method">
<code class="details" id="setIamPolicy">setIamPolicy(project, region, resource, body)</code>
<pre>Sets the access control policy on the specified resource. Replaces any existing policy.
Args:
project: string, Project ID for this request. (required)
region: string, The name of the region for this request. (required)
resource: string, Name or id of the resource for this request. (required)
body: object, The request body. (required)
The object takes the form of:
{
"policy": { # Defines an Identity and Access Management (IAM) policy. It is used to specify access control policies for Cloud Platform resources. # REQUIRED: The complete policy to be applied to the 'resource'. The size of the policy is limited to a few 10s of KB. An empty policy is in general a valid policy but certain services (like Projects) might reject them.
#
#
#
# A `Policy` consists of a list of `bindings`. A `binding` binds a list of `members` to a `role`, where the members can be user accounts, Google groups, Google domains, and service accounts. A `role` is a named list of permissions defined by IAM.
#
# **JSON Example**
#
# { "bindings": [ { "role": "roles/owner", "members": [ "user:mike@example.com", "group:admins@example.com", "domain:google.com", "serviceAccount:my-other-app@appspot.gserviceaccount.com" ] }, { "role": "roles/viewer", "members": ["user:sean@example.com"] } ] }
#
# **YAML Example**
#
# bindings: - members: - user:mike@example.com - group:admins@example.com - domain:google.com - serviceAccount:my-other-app@appspot.gserviceaccount.com role: roles/owner - members: - user:sean@example.com role: roles/viewer
#
#
#
# For a description of IAM and its features, see the [IAM developer's guide](https://cloud.google.com/iam/docs).
"auditConfigs": [ # Specifies cloud audit logging configuration for this policy.
{ # Specifies the audit configuration for a service. The configuration determines which permission types are logged, and what identities, if any, are exempted from logging. An AuditConfig must have one or more AuditLogConfigs.
#
# If there are AuditConfigs for both `allServices` and a specific service, the union of the two AuditConfigs is used for that service: the log_types specified in each AuditConfig are enabled, and the exempted_members in each AuditLogConfig are exempted.
#
# Example Policy with multiple AuditConfigs:
#
# { "audit_configs": [ { "service": "allServices" "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:foo@gmail.com" ] }, { "log_type": "DATA_WRITE", }, { "log_type": "ADMIN_READ", } ] }, { "service": "fooservice.googleapis.com" "audit_log_configs": [ { "log_type": "DATA_READ", }, { "log_type": "DATA_WRITE", "exempted_members": [ "user:bar@gmail.com" ] } ] } ] }
#
# For fooservice, this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also exempts foo@gmail.com from DATA_READ logging, and bar@gmail.com from DATA_WRITE logging.
"exemptedMembers": [
"A String",
],
"auditLogConfigs": [ # The configuration for logging of each type of permission.
{ # Provides the configuration for logging a type of permissions. Example:
#
# { "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:foo@gmail.com" ] }, { "log_type": "DATA_WRITE", } ] }
#
# This enables 'DATA_READ' and 'DATA_WRITE' logging, while exempting foo@gmail.com from DATA_READ logging.
"exemptedMembers": [ # Specifies the identities that do not cause logging for this type of permission. Follows the same format of [Binding.members][].
"A String",
],
"logType": "A String", # The log type that this config enables.
},
],
"service": "A String", # Specifies a service that will be enabled for audit logging. For example, `storage.googleapis.com`, `cloudsql.googleapis.com`. `allServices` is a special value that covers all services.
},
],
"rules": [ # If more than one rule is specified, the rules are applied in the following manner: - All matching LOG rules are always applied. - If any DENY/DENY_WITH_LOG rule matches, permission is denied. Logging will be applied if one or more matching rule requires logging. - Otherwise, if any ALLOW/ALLOW_WITH_LOG rule matches, permission is granted. Logging will be applied if one or more matching rule requires logging. - Otherwise, if no rule applies, permission is denied.
{ # A rule to be applied in a Policy.
"logConfigs": [ # The config returned to callers of tech.iam.IAM.CheckPolicy for any entries that match the LOG action.
{ # Specifies what kind of log the caller must write
"counter": { # Increment a streamz counter with the specified metric and field names. # Counter options.
#
# Metric names should start with a '/', generally be lowercase-only, and end in "_count". Field names should not contain an initial slash. The actual exported metric names will have "/iam/policy" prepended.
#
# Field names correspond to IAM request parameters and field values are their respective values.
#
# Supported field names: - "authority", which is "[token]" if IAMContext.token is present, otherwise the value of IAMContext.authority_selector if present, and otherwise a representation of IAMContext.principal; or - "iam_principal", a representation of IAMContext.principal even if a token or authority selector is present; or - "" (empty string), resulting in a counter with no fields.
#
# Examples: counter { metric: "/debug_access_count" field: "iam_principal" } ==> increment counter /iam/policy/backend_debug_access_count {iam_principal=[value of IAMContext.principal]}
#
# At this time we do not support multiple field names (though this may be supported in the future).
"field": "A String", # The field value to attribute.
"metric": "A String", # The metric to update.
},
"dataAccess": { # Write a Data Access (Gin) log # Data access options.
"logMode": "A String", # Whether Gin logging should happen in a fail-closed manner at the caller. This is relevant only in the LocalIAM implementation, for now.
},
"cloudAudit": { # Write a Cloud Audit log # Cloud audit options.
"logName": "A String", # The log_name to populate in the Cloud Audit Record.
"authorizationLoggingOptions": { # Authorization-related information used by Cloud Audit Logging. # Information used by the Cloud Audit Logging pipeline.
"permissionType": "A String", # The type of the permission that was checked.
},
},
},
],
"notIns": [ # If one or more 'not_in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in none of the entries.
"A String",
],
"ins": [ # If one or more 'in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in at least one of these entries.
"A String",
],
"action": "A String", # Required
"permissions": [ # A permission is a string of form '..' (e.g., 'storage.buckets.list'). A value of '*' matches all permissions, and a verb part of '*' (e.g., 'storage.buckets.*') matches all verbs.
"A String",
],
"conditions": [ # Additional restrictions that must be met. All conditions must pass for the rule to match.
{ # A condition to be met.
"iam": "A String", # Trusted attributes supplied by the IAM system.
"sys": "A String", # Trusted attributes supplied by any service that owns resources and uses the IAM system for access control.
"values": [ # The objects of the condition.
"A String",
],
"svc": "A String", # Trusted attributes discharged by the service.
"op": "A String", # An operator to apply the subject with.
},
],
"description": "A String", # Human-readable description of the rule.
},
],
"version": 42, # Deprecated.
"etag": "A String", # `etag` is used for optimistic concurrency control as a way to help prevent simultaneous updates of a policy from overwriting each other. It is strongly suggested that systems make use of the `etag` in the read-modify-write cycle to perform policy updates in order to avoid race conditions: An `etag` is returned in the response to `getIamPolicy`, and systems are expected to put that etag in the request to `setIamPolicy` to ensure that their change will be applied to the same version of the policy.
#
# If no `etag` is provided in the call to `setIamPolicy`, then the existing policy is overwritten blindly.
"bindings": [ # Associates a list of `members` to a `role`. `bindings` with no members will result in an error.
{ # Associates `members` with a `role`.
"role": "A String", # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`, or `roles/owner`.
"members": [ # Specifies the identities requesting access for a Cloud Platform resource. `members` can have the following values:
#
# * `allUsers`: A special identifier that represents anyone who is on the internet; with or without a Google account.
#
# * `allAuthenticatedUsers`: A special identifier that represents anyone who is authenticated with a Google account or a service account.
#
# * `user:{emailid}`: An email address that represents a specific Google account. For example, `alice@gmail.com` .
#
#
#
# * `serviceAccount:{emailid}`: An email address that represents a service account. For example, `my-other-app@appspot.gserviceaccount.com`.
#
# * `group:{emailid}`: An email address that represents a Google group. For example, `admins@example.com`.
#
#
#
# * `domain:{domain}`: The G Suite domain (primary) that represents all the users of that domain. For example, `google.com` or `example.com`.
"A String",
],
"condition": { # Represents an expression text. Example: # The condition that is associated with this binding. NOTE: An unsatisfied condition will not allow user access via current binding. Different bindings, including their conditions, are examined independently.
#
# title: "User account presence" description: "Determines whether the request has a user account" expression: "size(request.user) > 0"
"title": "A String", # An optional title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
#
# The application context of the containing message determines which well-known feature set of CEL is supported.
"description": "A String", # An optional description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"location": "A String", # An optional string indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
},
},
],
"iamOwned": True or False,
},
"bindings": [ # Flatten Policy to create a backwacd compatible wire-format. Deprecated. Use 'policy' to specify bindings.
{ # Associates `members` with a `role`.
"role": "A String", # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`, or `roles/owner`.
"members": [ # Specifies the identities requesting access for a Cloud Platform resource. `members` can have the following values:
#
# * `allUsers`: A special identifier that represents anyone who is on the internet; with or without a Google account.
#
# * `allAuthenticatedUsers`: A special identifier that represents anyone who is authenticated with a Google account or a service account.
#
# * `user:{emailid}`: An email address that represents a specific Google account. For example, `alice@gmail.com` .
#
#
#
# * `serviceAccount:{emailid}`: An email address that represents a service account. For example, `my-other-app@appspot.gserviceaccount.com`.
#
# * `group:{emailid}`: An email address that represents a Google group. For example, `admins@example.com`.
#
#
#
# * `domain:{domain}`: The G Suite domain (primary) that represents all the users of that domain. For example, `google.com` or `example.com`.
"A String",
],
"condition": { # Represents an expression text. Example: # The condition that is associated with this binding. NOTE: An unsatisfied condition will not allow user access via current binding. Different bindings, including their conditions, are examined independently.
#
# title: "User account presence" description: "Determines whether the request has a user account" expression: "size(request.user) > 0"
"title": "A String", # An optional title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
#
# The application context of the containing message determines which well-known feature set of CEL is supported.
"description": "A String", # An optional description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"location": "A String", # An optional string indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
},
},
],
"etag": "A String", # Flatten Policy to create a backward compatible wire-format. Deprecated. Use 'policy' to specify the etag.
}
Returns:
An object of the form:
{ # Defines an Identity and Access Management (IAM) policy. It is used to specify access control policies for Cloud Platform resources.
#
#
#
# A `Policy` consists of a list of `bindings`. A `binding` binds a list of `members` to a `role`, where the members can be user accounts, Google groups, Google domains, and service accounts. A `role` is a named list of permissions defined by IAM.
#
# **JSON Example**
#
# { "bindings": [ { "role": "roles/owner", "members": [ "user:mike@example.com", "group:admins@example.com", "domain:google.com", "serviceAccount:my-other-app@appspot.gserviceaccount.com" ] }, { "role": "roles/viewer", "members": ["user:sean@example.com"] } ] }
#
# **YAML Example**
#
# bindings: - members: - user:mike@example.com - group:admins@example.com - domain:google.com - serviceAccount:my-other-app@appspot.gserviceaccount.com role: roles/owner - members: - user:sean@example.com role: roles/viewer
#
#
#
# For a description of IAM and its features, see the [IAM developer's guide](https://cloud.google.com/iam/docs).
"auditConfigs": [ # Specifies cloud audit logging configuration for this policy.
{ # Specifies the audit configuration for a service. The configuration determines which permission types are logged, and what identities, if any, are exempted from logging. An AuditConfig must have one or more AuditLogConfigs.
#
# If there are AuditConfigs for both `allServices` and a specific service, the union of the two AuditConfigs is used for that service: the log_types specified in each AuditConfig are enabled, and the exempted_members in each AuditLogConfig are exempted.
#
# Example Policy with multiple AuditConfigs:
#
# { "audit_configs": [ { "service": "allServices" "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:foo@gmail.com" ] }, { "log_type": "DATA_WRITE", }, { "log_type": "ADMIN_READ", } ] }, { "service": "fooservice.googleapis.com" "audit_log_configs": [ { "log_type": "DATA_READ", }, { "log_type": "DATA_WRITE", "exempted_members": [ "user:bar@gmail.com" ] } ] } ] }
#
# For fooservice, this policy enables DATA_READ, DATA_WRITE and ADMIN_READ logging. It also exempts foo@gmail.com from DATA_READ logging, and bar@gmail.com from DATA_WRITE logging.
"exemptedMembers": [
"A String",
],
"auditLogConfigs": [ # The configuration for logging of each type of permission.
{ # Provides the configuration for logging a type of permissions. Example:
#
# { "audit_log_configs": [ { "log_type": "DATA_READ", "exempted_members": [ "user:foo@gmail.com" ] }, { "log_type": "DATA_WRITE", } ] }
#
# This enables 'DATA_READ' and 'DATA_WRITE' logging, while exempting foo@gmail.com from DATA_READ logging.
"exemptedMembers": [ # Specifies the identities that do not cause logging for this type of permission. Follows the same format of [Binding.members][].
"A String",
],
"logType": "A String", # The log type that this config enables.
},
],
"service": "A String", # Specifies a service that will be enabled for audit logging. For example, `storage.googleapis.com`, `cloudsql.googleapis.com`. `allServices` is a special value that covers all services.
},
],
"rules": [ # If more than one rule is specified, the rules are applied in the following manner: - All matching LOG rules are always applied. - If any DENY/DENY_WITH_LOG rule matches, permission is denied. Logging will be applied if one or more matching rule requires logging. - Otherwise, if any ALLOW/ALLOW_WITH_LOG rule matches, permission is granted. Logging will be applied if one or more matching rule requires logging. - Otherwise, if no rule applies, permission is denied.
{ # A rule to be applied in a Policy.
"logConfigs": [ # The config returned to callers of tech.iam.IAM.CheckPolicy for any entries that match the LOG action.
{ # Specifies what kind of log the caller must write
"counter": { # Increment a streamz counter with the specified metric and field names. # Counter options.
#
# Metric names should start with a '/', generally be lowercase-only, and end in "_count". Field names should not contain an initial slash. The actual exported metric names will have "/iam/policy" prepended.
#
# Field names correspond to IAM request parameters and field values are their respective values.
#
# Supported field names: - "authority", which is "[token]" if IAMContext.token is present, otherwise the value of IAMContext.authority_selector if present, and otherwise a representation of IAMContext.principal; or - "iam_principal", a representation of IAMContext.principal even if a token or authority selector is present; or - "" (empty string), resulting in a counter with no fields.
#
# Examples: counter { metric: "/debug_access_count" field: "iam_principal" } ==> increment counter /iam/policy/backend_debug_access_count {iam_principal=[value of IAMContext.principal]}
#
# At this time we do not support multiple field names (though this may be supported in the future).
"field": "A String", # The field value to attribute.
"metric": "A String", # The metric to update.
},
"dataAccess": { # Write a Data Access (Gin) log # Data access options.
"logMode": "A String", # Whether Gin logging should happen in a fail-closed manner at the caller. This is relevant only in the LocalIAM implementation, for now.
},
"cloudAudit": { # Write a Cloud Audit log # Cloud audit options.
"logName": "A String", # The log_name to populate in the Cloud Audit Record.
"authorizationLoggingOptions": { # Authorization-related information used by Cloud Audit Logging. # Information used by the Cloud Audit Logging pipeline.
"permissionType": "A String", # The type of the permission that was checked.
},
},
},
],
"notIns": [ # If one or more 'not_in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in none of the entries.
"A String",
],
"ins": [ # If one or more 'in' clauses are specified, the rule matches if the PRINCIPAL/AUTHORITY_SELECTOR is in at least one of these entries.
"A String",
],
"action": "A String", # Required
"permissions": [ # A permission is a string of form '..' (e.g., 'storage.buckets.list'). A value of '*' matches all permissions, and a verb part of '*' (e.g., 'storage.buckets.*') matches all verbs.
"A String",
],
"conditions": [ # Additional restrictions that must be met. All conditions must pass for the rule to match.
{ # A condition to be met.
"iam": "A String", # Trusted attributes supplied by the IAM system.
"sys": "A String", # Trusted attributes supplied by any service that owns resources and uses the IAM system for access control.
"values": [ # The objects of the condition.
"A String",
],
"svc": "A String", # Trusted attributes discharged by the service.
"op": "A String", # An operator to apply the subject with.
},
],
"description": "A String", # Human-readable description of the rule.
},
],
"version": 42, # Deprecated.
"etag": "A String", # `etag` is used for optimistic concurrency control as a way to help prevent simultaneous updates of a policy from overwriting each other. It is strongly suggested that systems make use of the `etag` in the read-modify-write cycle to perform policy updates in order to avoid race conditions: An `etag` is returned in the response to `getIamPolicy`, and systems are expected to put that etag in the request to `setIamPolicy` to ensure that their change will be applied to the same version of the policy.
#
# If no `etag` is provided in the call to `setIamPolicy`, then the existing policy is overwritten blindly.
"bindings": [ # Associates a list of `members` to a `role`. `bindings` with no members will result in an error.
{ # Associates `members` with a `role`.
"role": "A String", # Role that is assigned to `members`. For example, `roles/viewer`, `roles/editor`, or `roles/owner`.
"members": [ # Specifies the identities requesting access for a Cloud Platform resource. `members` can have the following values:
#
# * `allUsers`: A special identifier that represents anyone who is on the internet; with or without a Google account.
#
# * `allAuthenticatedUsers`: A special identifier that represents anyone who is authenticated with a Google account or a service account.
#
# * `user:{emailid}`: An email address that represents a specific Google account. For example, `alice@gmail.com` .
#
#
#
# * `serviceAccount:{emailid}`: An email address that represents a service account. For example, `my-other-app@appspot.gserviceaccount.com`.
#
# * `group:{emailid}`: An email address that represents a Google group. For example, `admins@example.com`.
#
#
#
# * `domain:{domain}`: The G Suite domain (primary) that represents all the users of that domain. For example, `google.com` or `example.com`.
"A String",
],
"condition": { # Represents an expression text. Example: # The condition that is associated with this binding. NOTE: An unsatisfied condition will not allow user access via current binding. Different bindings, including their conditions, are examined independently.
#
# title: "User account presence" description: "Determines whether the request has a user account" expression: "size(request.user) > 0"
"title": "A String", # An optional title for the expression, i.e. a short string describing its purpose. This can be used e.g. in UIs which allow to enter the expression.
"expression": "A String", # Textual representation of an expression in Common Expression Language syntax.
#
# The application context of the containing message determines which well-known feature set of CEL is supported.
"description": "A String", # An optional description of the expression. This is a longer text which describes the expression, e.g. when hovered over it in a UI.
"location": "A String", # An optional string indicating the location of the expression for error reporting, e.g. a file name and a position in the file.
},
},
],
"iamOwned": True or False,
}</pre>
</div>
<div class="method">
<code class="details" id="setPrivateIpGoogleAccess">setPrivateIpGoogleAccess(project, region, subnetwork, body, requestId=None)</code>
<pre>Set whether VMs in this subnet can access Google services without assigning external IP addresses through Private Google Access.
Args:
project: string, Project ID for this request. (required)
region: string, Name of the region scoping this request. (required)
subnetwork: string, Name of the Subnetwork resource. (required)
body: object, The request body. (required)
The object takes the form of:
{
"privateIpGoogleAccess": True or False,
}
requestId: string, An optional request ID to identify requests. Specify a unique request ID so that if you must retry your request, the server will know to ignore the request if it has already been completed.
For example, consider a situation where you make an initial request and the request times out. If you make the request again with the same request ID, the server can check if original operation with the same request ID was received, and if so, will ignore the second request. This prevents clients from accidentally creating duplicate commitments.
The request ID must be a valid UUID with the exception that zero UUID is not supported (00000000-0000-0000-0000-000000000000).
Returns:
An object of the form:
{ # Represents an Operation resource.
#
# You can use an operation resource to manage asynchronous API requests. For more information, read Handling API responses.
#
# Operations can be global, regional or zonal.
# - For global operations, use the globalOperations resource.
# - For regional operations, use the regionOperations resource.
# - For zonal operations, use the zonalOperations resource.
#
# For more information, read Global, Regional, and Zonal Resources. (== resource_for v1.globalOperations ==) (== resource_for beta.globalOperations ==) (== resource_for v1.regionOperations ==) (== resource_for beta.regionOperations ==) (== resource_for v1.zoneOperations ==) (== resource_for beta.zoneOperations ==)
"targetId": "A String", # [Output Only] The unique target ID, which identifies a specific incarnation of the target resource.
"clientOperationId": "A String", # [Output Only] The value of `requestId` if you provided it in the request. Not present otherwise.
"creationTimestamp": "A String", # [Deprecated] This field is deprecated.
"id": "A String", # [Output Only] The unique identifier for the resource. This identifier is defined by the server.
"zone": "A String", # [Output Only] The URL of the zone where the operation resides. Only applicable when performing per-zone operations.
"insertTime": "A String", # [Output Only] The time that this operation was requested. This value is in RFC3339 text format.
"operationType": "A String", # [Output Only] The type of operation, such as insert, update, or delete, and so on.
"httpErrorMessage": "A String", # [Output Only] If the operation fails, this field contains the HTTP error message that was returned, such as NOT FOUND.
"progress": 42, # [Output Only] An optional progress indicator that ranges from 0 to 100. There is no requirement that this be linear or support any granularity of operations. This should not be used to guess when the operation will be complete. This number should monotonically increase as the operation progresses.
"httpErrorStatusCode": 42, # [Output Only] If the operation fails, this field contains the HTTP error status code that was returned. For example, a 404 means the resource was not found.
"statusMessage": "A String", # [Output Only] An optional textual description of the current status of the operation.
"status": "A String", # [Output Only] The status of the operation, which can be one of the following: PENDING, RUNNING, or DONE.
"description": "A String", # [Output Only] A textual description of the operation, which is set when the operation is created.
"warnings": [ # [Output Only] If warning messages are generated during processing of the operation, this field will be populated.
{
"message": "A String", # [Output Only] A human-readable description of the warning code.
"code": "A String", # [Output Only] A warning code, if applicable. For example, Compute Engine returns NO_RESULTS_ON_PAGE if there are no results in the response.
"data": [ # [Output Only] Metadata about this warning in key: value format. For example:
# "data": [ { "key": "scope", "value": "zones/us-east1-d" }
{
"value": "A String", # [Output Only] A warning data value corresponding to the key.
"key": "A String", # [Output Only] A key that provides more detail on the warning being returned. For example, for warnings where there are no results in a list request for a particular zone, this key might be scope and the key value might be the zone name. Other examples might be a key indicating a deprecated resource and a suggested replacement, or a warning about invalid network settings (for example, if an instance attempts to perform IP forwarding but is not enabled for IP forwarding).
},
],
},
],
"user": "A String", # [Output Only] User who requested the operation, for example: user@example.com.
"startTime": "A String", # [Output Only] The time that this operation was started by the server. This value is in RFC3339 text format.
"kind": "compute#operation", # [Output Only] Type of the resource. Always compute#operation for Operation resources.
"name": "A String", # [Output Only] Name of the resource.
"region": "A String", # [Output Only] The URL of the region where the operation resides. Only applicable when performing regional operations.
"error": { # [Output Only] If errors are generated during processing of the operation, this field will be populated.
"errors": [ # [Output Only] The array of errors encountered while processing this operation.
{
"message": "A String", # [Output Only] An optional, human-readable error message.
"code": "A String", # [Output Only] The error type identifier for this error.
"location": "A String", # [Output Only] Indicates the field in the request that caused the error. This property is optional.
},
],
},
"endTime": "A String", # [Output Only] The time that this operation was completed. This value is in RFC3339 text format.
"selfLink": "A String", # [Output Only] Server-defined URL for the resource.
"targetLink": "A String", # [Output Only] The URL of the resource that the operation modifies. For operations related to creating a snapshot, this points to the persistent disk that the snapshot was created from.
}</pre>
</div>
<div class="method">
<code class="details" id="testIamPermissions">testIamPermissions(project, region, resource, body)</code>
<pre>Returns permissions that a caller has on the specified resource.
Args:
project: string, Project ID for this request. (required)
region: string, The name of the region for this request. (required)
resource: string, Name or id of the resource for this request. (required)
body: object, The request body. (required)
The object takes the form of:
{
"permissions": [ # The set of permissions to check for the 'resource'. Permissions with wildcards (such as '*' or 'storage.*') are not allowed.
"A String",
],
}
Returns:
An object of the form:
{
"permissions": [ # A subset of `TestPermissionsRequest.permissions` that the caller is allowed.
"A String",
],
}</pre>
</div>
</body></html>
|