# Copyright (c) 2012 OpenStack Foundation.
# Administrator of the National Aeronautics and Space Administration.
# All Rights Reserved.
#
#    Licensed under the Apache License, Version 2.0 (the "License"); you may
#    not use this file except in compliance with the License. You may obtain
#    a copy of the License at
#
#         http://www.apache.org/licenses/LICENSE-2.0
#
#    Unless required by applicable law or agreed to in writing, software
#    distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
#    WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
#    License for the specific language governing permissions and limitations
#    under the License.

import errno
import gc
import logging
import os
import pprint
import sys
import tempfile
import traceback

import eventlet.backdoor
import greenlet
import yappi

from eventlet.green import socket
from oslo_service._i18n import _
from oslo_service import _options


LOG = logging.getLogger(__name__)


class EventletBackdoorConfigValueError(Exception):
    def __init__(self, port_range, help_msg, ex):
        msg = (_('Invalid backdoor_port configuration %(range)s: %(ex)s. '
               '%(help)s') %
               {'range': port_range, 'ex': ex, 'help': help_msg})
        super(EventletBackdoorConfigValueError, self).__init__(msg)
        self.port_range = port_range


def _dont_use_this():
    print("Don't use this, just disconnect instead")


def _dump_frame(f, frame_chapter):
    co = f.f_code
    print(" %s Frame: %s" % (frame_chapter, co.co_name))
    print("     File: %s" % (co.co_filename))
    print("     Captured at line number: %s" % (f.f_lineno))
    co_locals = set(co.co_varnames)
    if len(co_locals):
        not_set = co_locals.copy()
        set_locals = {}
        for var_name in f.f_locals.keys():
            if var_name in co_locals:
                set_locals[var_name] = f.f_locals[var_name]
                not_set.discard(var_name)
        if set_locals:
            print("     %s set local variables:" % (len(set_locals)))
            for var_name in sorted(set_locals.keys()):
                print("       %s => %r" % (var_name, f.f_locals[var_name]))
        else:
            print("     0 set local variables.")
        if not_set:
            print("     %s not set local variables:" % (len(not_set)))
            for var_name in sorted(not_set):
                print("       %s" % (var_name))
        else:
            print("     0 not set local variables.")
    else:
        print("     0 Local variables.")


def _detailed_dump_frames(f, thread_index):
    i = 0
    while f is not None:
        _dump_frame(f, "%s.%s" % (thread_index, i + 1))
        f = f.f_back
        i += 1


def _find_objects(t):
    return [o for o in gc.get_objects() if isinstance(o, t)]


def _capture_profile(fname=''):
    if not fname:
        yappi.set_clock_type('cpu')
        # We need to set context to greenlet to profile greenlets
        # https://bitbucket.org/sumerc/yappi/pull-requests/3
        yappi.set_context_id_callback(
            lambda: id(greenlet.getcurrent()))
        yappi.set_context_name_callback(
            lambda: greenlet.getcurrent().__class__.__name__)
        yappi.start()
    else:
        yappi.stop()
        stats = yappi.get_func_stats()
        # User should provide filename. This file with a suffix .prof
        # will be created in temp directory.
        try:
            stats_file = os.path.join(tempfile.gettempdir(), fname + '.prof')
            stats.save(stats_file, "pstat")
        except Exception as e:
            print("Error while saving the trace stats ", str(e))
        finally:
            yappi.clear_stats()


def _print_greenthreads(simple=True):
    for i, gt in enumerate(_find_objects(greenlet.greenlet)):
        print(i, gt)
        if simple:
            traceback.print_stack(gt.gr_frame)
        else:
            _detailed_dump_frames(gt.gr_frame, i)
        print()


def _print_nativethreads():
    for threadId, stack in sys._current_frames().items():
        print(threadId)
        traceback.print_stack(stack)
        print()


def _parse_port_range(port_range):
    if ':' not in port_range:
        start, end = port_range, port_range
    else:
        start, end = port_range.split(':', 1)
    try:
        start, end = int(start), int(end)
        if end < start:
            raise ValueError
        return start, end
    except ValueError as ex:
        raise EventletBackdoorConfigValueError(
            port_range, ex, _options.help_for_backdoor_port)


def _listen_func(host, port):
    # eventlet is setting SO_REUSEPORT by default from v0.20.
    # But we can configure it by passing reuse_port argument
    # from v0.22
    try:
        return eventlet.listen((host, port), reuse_port=False)
    except TypeError:
        sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
        sock.bind((host, port))
        sock.listen(50)
        return sock


def _listen(host, start_port, end_port):
    try_port = start_port
    while True:
        try:
            return _listen_func(host, try_port)
        except socket.error as exc:
            if (exc.errno != errno.EADDRINUSE or
               try_port >= end_port):
                raise
            try_port += 1


def _try_open_unix_domain_socket(socket_path):
    try:
        return eventlet.listen(socket_path, socket.AF_UNIX)
    except socket.error as e:
        if e.errno != errno.EADDRINUSE:
            # NOTE(harlowja): Some other non-address in use error
            # occurred, since we aren't handling those, re-raise
            # and give up...
            raise
        else:
            # Attempt to remove the file before opening it again.
            try:
                os.unlink(socket_path)
            except OSError as e:
                if e.errno != errno.ENOENT:
                    # NOTE(harlowja): File existed, but we couldn't
                    # delete it, give up...
                    raise
            return eventlet.listen(socket_path, socket.AF_UNIX)


def _initialize_if_enabled(conf):
    conf.register_opts(_options.eventlet_backdoor_opts)
    backdoor_locals = {
        'exit': _dont_use_this,      # So we don't exit the entire process
        'quit': _dont_use_this,      # So we don't exit the entire process
        'fo': _find_objects,
        'pgt': _print_greenthreads,
        'pnt': _print_nativethreads,
        'prof': _capture_profile,
    }

    if conf.backdoor_port is None and conf.backdoor_socket is None:
        return None

    if conf.backdoor_socket is None:
        start_port, end_port = _parse_port_range(str(conf.backdoor_port))
        sock = _listen('localhost', start_port, end_port)
        # In the case of backdoor port being zero, a port number is assigned by
        # listen().  In any case, pull the port number out here.
        where_running = sock.getsockname()[1]
    else:
        try:
            backdoor_socket_path = conf.backdoor_socket.format(pid=os.getpid())
        except (KeyError, IndexError, ValueError) as e:
            backdoor_socket_path = conf.backdoor_socket
            LOG.warning("Could not apply format string to eventlet "
                        "backdoor socket path ({}) - continuing with "
                        "unformatted path"
                        "".format(e))
        sock = _try_open_unix_domain_socket(backdoor_socket_path)
        where_running = backdoor_socket_path

    # NOTE(johannes): The standard sys.displayhook will print the value of
    # the last expression and set it to __builtin__._, which overwrites
    # the __builtin__._ that gettext sets. Let's switch to using pprint
    # since it won't interact poorly with gettext, and it's easier to
    # read the output too.
    def displayhook(val):
        if val is not None:
            pprint.pprint(val)
    sys.displayhook = displayhook

    LOG.info(
        'Eventlet backdoor listening on %(where_running)s for'
        ' process %(pid)d',
        {'where_running': where_running, 'pid': os.getpid()}
    )
    thread = eventlet.spawn(eventlet.backdoor.backdoor_server, sock,
                            locals=backdoor_locals)
    return (where_running, thread)


def initialize_if_enabled(conf):
    where_running_thread = _initialize_if_enabled(conf)
    if not where_running_thread:
        return None
    else:
        where_running, _thread = where_running_thread
        return where_running


def _main():
    import eventlet
    eventlet.monkey_patch(all=True)
    # Monkey patch the original current_thread to use the up-to-date _active
    # global variable. See https://bugs.launchpad.net/bugs/1863021 and
    # https://github.com/eventlet/eventlet/issues/592
    import __original_module_threading as orig_threading
    import threading  # noqa
    orig_threading.current_thread.__globals__['_active'] = threading._active

    from oslo_config import cfg

    logging.basicConfig(level=logging.DEBUG)

    conf = cfg.ConfigOpts()
    conf.register_cli_opts(_options.eventlet_backdoor_opts)
    conf(sys.argv[1:])

    where_running_thread = _initialize_if_enabled(conf)
    if not where_running_thread:
        raise RuntimeError(_("Did not create backdoor at requested location"))
    else:
        _where_running, thread = where_running_thread
        thread.wait()


if __name__ == '__main__':
    # simple CLI for testing
    _main()