# Copyright 2013 IBM Corporation
# Copyright 2015-2017 Lenovo
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

"""This represents the low layer message framing portion of IPMI"""

import collections
import hashlib
import hmac
import os
import random
import select
import socket
import struct
import threading

from cryptography.hazmat.backends import default_backend
from cryptography.hazmat.primitives.ciphers import algorithms
from cryptography.hazmat.primitives.ciphers import Cipher
from cryptography.hazmat.primitives.ciphers import modes

import pyghmi.exceptions as exc
from pyghmi.ipmi.private import constants
from pyghmi.ipmi.private import util
from pyghmi.ipmi.private.util import _monotonic_time
from pyghmi.ipmi.private.util import get_ipmi_error


KEEPALIVE_SESSIONS = threading.RLock()
WAITING_SESSIONS = threading.RLock()


try:
    dict.iteritems

    def dictitems(d):
        return d.iteritems()
except AttributeError:
    def dictitems(d):
        return d.items()

# minimum timeout for first packet to retry in any given
# session.  This will be randomized to stagger out retries
# in case of congestion
initialtimeout = 0.5


ioqueue = collections.deque([])
ipv6support = None
selectdeadline = 0
running = True
# no more than this many BMCs will share a socket
# this could be adjusted based on rmem_max
# value, leading to fewer filehandles
MAX_BMCS_PER_SOCKET = 64

# maximum time to allow idle, more than this and BMC may assume
MAX_IDLE = 29
# incorrect idle
sessionqueue = collections.deque([])


try:
    IPPROTO_IPV6 = socket.IPPROTO_IPV6
except AttributeError:
    IPPROTO_IPV6 = 41  # This is the Win32 version of IPPROTO_IPV6, the only
    # platform where python *doesn't* have this in socket that pyghmi is
    # targetting.


def _aespad(data):
    """ipmi demands a certain pad scheme, per table 13-20 AES-CBC encrypted

    payload fields.
    """
    currlen = len(data) + 1  # need to count the pad length field as well
    neededpad = currlen % 16
    if neededpad:  # if it happens to be zero, hurray, but otherwise invert the
        # sense of the padding
        neededpad = 16 - neededpad
    padval = 1
    pad = bytearray(neededpad)
    while padval <= neededpad:
        pad[padval - 1] = padval
        padval += 1
    pad.append(neededpad)
    return pad


def _checksum(*data):  # Two's complement over the data
    csum = sum(data)
    csum ^= 0xff
    csum += 1
    csum &= 0xff
    return csum


class Session(object):
    """A class to manage common IPMI session logistics

    Almost all developers should not worry about this class and instead be
    looking toward ipmi.Command and ipmi.Console.

    For those that do have to worry, the main interesting thing is that the
    event loop can go one of two ways.  Either a larger manager can query using
    class methods
    the soonest timeout deadline and the filehandles to poll and assume
    responsibility for the polling, or it can register filehandles to be
    watched.  This is primarily of interest to Console class, which may have an
    input filehandle to watch and can pass it to Session.

    :param bmc: hostname or ip address of the BMC
    :param userid: username to use to connect
    :param password: password to connect to the BMC
    :param kg: optional parameter if BMC requires Kg be set
    :param port: UDP port to communicate with, pretty much always 623
    :param onlogon: callback to receive notification of login completion
    """
    bmc_handlers = {}
    waiting_sessions = {}
    initting_sessions = {}
    keepalive_sessions = {}
    peeraddr_to_nodes = {}
    iterwaiters = []
    # NOTE(jbjohnso):
    # socketpool is a mapping of sockets to usage count
    socketpool = {}
    # this will be a lock.  Delay the assignment so that a calling framework
    # can do something like reassign our threading and select modules
    socketchecking = None

    # Maintain single Cryptography backend for all IPMI sessions (seems to be
    # thread-safe)
    _crypto_backend = default_backend()

    @classmethod
    def _cleanup(cls):
        for sesskey in list(cls.bmc_handlers):
            for portent in list(cls.bmc_handlers[sesskey]):
                session = cls.bmc_handlers[sesskey][portent]
                session.cleaningup = True
                session.logout()

    @classmethod
    def _assignsocket(cls, server=None):
        global ipv6support

        if ipv6support:
            tmpsocket = socket.socket(socket.AF_INET6, socket.SOCK_DGRAM)
            tmpsocket.setsockopt(IPPROTO_IPV6, socket.IPV6_V6ONLY, 0)
        elif ipv6support is None:  # we need to determine ipv6 support now
            try:
                tmpsocket = socket.socket(socket.AF_INET6, socket.SOCK_DGRAM)
                tmpsocket.setsockopt(IPPROTO_IPV6, socket.IPV6_V6ONLY, 0)
                ipv6support = True
            except socket.error:
                ipv6support = False
                tmpsocket = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
        else:
            tmpsocket = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
        tmpsocket.bind(('', 0))
        return tmpsocket

    def _sync_login(self, response):
        """Handle synchronous callers in lieu of a client-provided callback"""
        # Be a stub, the __init__ will catch and respond to ensure response
        # is given in the same thread as was called
        return

    @classmethod
    def _is_session_valid(cls, session):
        with util.protect(KEEPALIVE_SESSIONS):
            sess = cls.keepalive_sessions.get(session, None)
            if sess is not None and 'timeout' in sess:
                if sess['timeout'] < _monotonic_time() - 15:
                    # session would have timed out by now, don't use it
                    return False
        return not session.broken

    def __init__(self,
                 bmc,
                 userid,
                 password,
                 port=623,
                 kg=None,
                 onlogon=None,
                 privlevel=None,
                 keepalive=True):
        self.broken = False
        self.socket = None
        self.logged = 0
        if privlevel is not None:
            self.privlevel = privlevel
            self.autopriv = False
        else:
            self.privlevel = 4
            self.autopriv = True
        self.logoutexpiry = None
        self.autokeepalive = keepalive
        self.maxtimeout = 3  # be aggressive about giving up on initial packet
        self.incommand = False
        self.nameonly = 16  # default to name only lookups in RAKP exchange
        self.servermode = False
        self.initialized = True
        self.cleaningup = False
        self.lastpayload = None
        self._customkeepalives = None
        # queue of events denoting line to run a cmd
        self.evq = collections.deque([])
        self.bmc = bmc
        # a private queue for packets for which this session handler
        # is destined to receive
        self.pktqueue = collections.deque([])

        try:
            self.userid = userid.encode('utf-8')
            self.password = password.encode('utf-8')
        except AttributeError:
            self.userid = userid
            self.password = password
        self.nowait = False
        self.pendingpayloads = collections.deque([])
        self.request_entry = []
        self.kgo = kg
        if kg is not None:
            try:
                kg = kg.encode('utf-8')
            except AttributeError:
                pass
            self.kg = kg
        else:
            self.kg = self.password
        self.port = port
        if onlogon is None:
            self.async_ = False
            self.logonwaiters = [self._sync_login]
        else:
            self.async_ = True
            self.logonwaiters = [onlogon]
        if self.__class__.socketchecking is None:
            self.__class__.socketchecking = threading.Lock()
        with self.socketchecking:
            self.socket = self._assignsocket()
        self.login()
        while self.logging:
            self.wait_for_rsp()
        if self.broken:
            raise exc.IpmiException(self.errormsg)

    def _mark_broken(self, error=None):
        # since our connection has failed retries
        # deregister our keepalive facility
        self.lastpayload = None
        self.logout(False)
        self.logging = False
        self.errormsg = error
        if not self.broken:
            self.broken = True

    def onlogon(self, parameter):
        if 'error' in parameter:
            self._mark_broken(parameter['error'])
        while self.logonwaiters:
            waiter = self.logonwaiters.pop()
            waiter(parameter)

    def _initsession(self):
        # NOTE(jbjohnso): this number can be whatever we want.
        #                 I picked 'xCAT' minus 1 so that a hexdump of packet
        #                 would show xCAT
        self.localsid = 2017673555
        self.confalgo = 0
        self.aeskey = None
        self.integrityalgo = 0
        self.attemptedhash = 256
        self.currhashlib = None
        self.currhashlen = 0
        self.k1 = None
        self.rmcptag = 1
        self.lastpayload = None
        self.ipmicallback = None
        self.sessioncontext = None
        self.sequencenumber = 0
        self.sessionid = 0
        self.authtype = 0
        self.ipmiversion = 1.5
        self.timeout = initialtimeout + (0.5 * random.random())
        self.logoutexpiry = _monotonic_time() + self._getmaxtimeout()
        self.rqlun = 0
        self.seqlun = 0
        # NOTE(jbjohnso): per IPMI table 5-4, software ids in the ipmi spec may
        #                 be 0x81 through 0x8d.  We'll stick with 0x81 for now,
        #                 do not forsee a reason to adjust
        self.rqaddr = 0x81

        self.logging = True
        self.logged = 0
        # NOTE(jbjohnso): when we confirm a working sockaddr, put it here to
        #                 skip getaddrinfo
        self.sockaddr = None
        # NOTE(jbjohnso): this tracks netfn,command,seqlun combinations that
        #                 were retried so that we don't loop around and reuse
        #                 the same request data and cause potential ambiguity
        #                 in return
        self.tabooseq = {}
        # NOTE(jbjohnso): default to supporting ipmi 2.0.  Strictly by spec,
        #                 this should gracefully be backwards compat, but some
        #                 1.5 implementations checked reserved bits
        self.ipmi15only = 0
        self.sol_handler = None
        # NOTE(jbjohnso): This is the callback handler for any SOL payload

    def _make_bridge_request_msg(self, channel, netfn, command):
        """This function generate message for bridge request. It is a

        part of ipmi payload.
        """
        head = bytearray((constants.IPMI_BMC_ADDRESS,
                          constants.netfn_codes['application'] << 2))
        check_sum = _checksum(*head)
        # NOTE(fengqian): according IPMI Figure 14-11, rqSWID is set to 81h
        boday = bytearray((0x81, (self.seqlun << 2) | self.rqlun,
                           constants.IPMI_SEND_MESSAGE_CMD, 0x40 | channel))
        # NOTE(fengqian): Track request
        self._add_request_entry((constants.netfn_codes['application'] + 1,
                                 self.seqlun, constants.IPMI_SEND_MESSAGE_CMD))
        return head + bytearray((check_sum,)) + boday

    def _add_request_entry(self, entry=()):
        """This function record the request with netfn, sequence number and

        command, which will be used in parse_ipmi_payload.
        :param entry: a set of netfn, sequence number and command.
        """
        if not self._lookup_request_entry(entry):
            self.request_entry.append(entry)

    def _lookup_request_entry(self, entry=()):
        return entry in self.request_entry

    def _remove_request_entry(self, entry=()):
        if self._lookup_request_entry(entry):
            self.request_entry.remove(entry)

    def _make_ipmi_payload(self, netfn, command, bridge_request=None, data=(),
                           rslun=0):
        """This function generates the core ipmi payload that would be

        applicable for any channel (including KCS)
        """
        bridge_msg = []
        self.expectedcmd = command
        # in ipmi, the response netfn is always one
        self.expectednetfn = netfn + 1
        # higher than the request payload, we assume
        # we are always the requestor for now
        seqincrement = 7  # IPMI spec forbids gaps bigger then 7 in seq number.
        # Risk the taboo rather than violate the rules
        while (not self.servermode
               and (netfn, command, self.seqlun) in self.tabooseq
               and self.tabooseq[(netfn, command, self.seqlun)]
               and seqincrement):
            self.tabooseq[(self.expectednetfn, command, self.seqlun)] -= 1
            # Allow taboo to eventually expire after a few rounds
            self.seqlun += 1  # the last two bits are lun, so add 4 to add 1
            self.seqlun &= 0x3f  # we only have one byte, wrap when exceeded
            seqincrement -= 1

        if bridge_request:
            addr = bridge_request.get('addr', 0x0)
            channel = bridge_request.get('channel', 0x0)
            bridge_msg = self._make_bridge_request_msg(channel, netfn, command)
            # NOTE(fengqian): For bridge request, rsaddr is specified and
            # rqaddr is BMC address.
            rqaddr = constants.IPMI_BMC_ADDRESS
            rsaddr = addr
        else:
            rqaddr = self.rqaddr
            rsaddr = constants.IPMI_BMC_ADDRESS
        if self.servermode:
            rsaddr = self.clientaddr
        # figure 13-4, first two bytes are rsaddr and
        # netfn, for non-bridge request, rsaddr is always 0x20 since we are
        # addressing BMC while rsaddr is specified forbridge request
        header = bytearray((rsaddr, (netfn << 2) | rslun))

        reqbody = bytearray((
            rqaddr, (self.seqlun << 2) | self.rqlun, command)) + data
        headsum = bytearray((_checksum(*header),))
        bodysum = bytearray((_checksum(*reqbody),))
        payload = header + headsum + reqbody + bodysum
        if bridge_request:
            payload = bridge_msg + payload
            # NOTE(fengqian): For bridge request, another check sum is needed.
            tail_csum = _checksum(*payload[3:])
            payload.append(tail_csum)

        if not self.servermode:
            self._add_request_entry((self.expectednetfn, self.seqlun, command))
        return payload

    def _generic_callback(self, response):
        errorstr = get_ipmi_error(response)
        if errorstr:
            response['error'] = errorstr
        self.lastresponse = response

    def _isincommand(self):
        if self.incommand:
            stillin = self.incommand - _monotonic_time()
            if stillin > 0:
                return stillin
            else:
                self.lastpayload = None
        return 0

    def _getmaxtimeout(self):
        cumulativetime = 0
        incrementtime = self.timeout
        while incrementtime < self.maxtimeout:
            cumulativetime += incrementtime
            incrementtime += 1
        return cumulativetime + 1

    def _cmdwait(self):
        while self._isincommand():
            self.wait_for_rsp()

    def awaitresponse(self, retry):
        while retry and self.lastresponse is None and self.logged:
            timeout = 30.0  # self.expiration - _monotonic_time()
            select.select([self.socket], [], [], timeout)
            while self.iterwaiters:
                waiter = self.iterwaiters.pop()
                waiter({'success': True})
            self.process_pktqueue()

    def raw_command(self,
                    netfn,
                    command,
                    bridge_request=None,
                    data=(),
                    retry=True,
                    delay_xmit=None,
                    timeout=None,
                    callback=None,
                    rslun=0):
        if not self.logged:
            if (self.logoutexpiry is not None
                    and _monotonic_time() > self.logoutexpiry):
                self._mark_broken()
            raise exc.IpmiException('Session no longer connected')
        self._cmdwait()
        if not self.logged:
            raise exc.IpmiException('Session no longer connected')
        self.incommand = _monotonic_time() + self._getmaxtimeout()
        self.lastresponse = None
        if callback is None:
            self.ipmicallback = self._generic_callback
        else:
            self.ipmicallback = callback
        self._send_ipmi_net_payload(netfn, command, data,
                                    bridge_request=bridge_request,
                                    retry=retry, delay_xmit=delay_xmit,
                                    timeout=timeout, rslun=rslun)

        if retry:  # in retry case, let the retry timers indicate wait time
            timeout = None
        else:  # if not retry, give it a second before surrending
            timeout = 1
        if callback:
            # caller *must* clean up self.incommand and self.evq
            return
        # The event loop is shared amongst pyghmi session instances
        # within a process.  In this way, synchronous usage of the interface
        # plays well with asynchronous use.  In fact, this produces the
        # behavior of only the constructor needing a callback.  From then on,
        # synchronous usage of the class acts in a greenthread style governed
        # by order of data on the network
        self.awaitresponse(retry)
        lastresponse = self.lastresponse
        self.incommand = False
        while self.evq:
            self.evq.popleft().set()
        if retry and lastresponse is None:
            raise exc.IpmiException('Session no longer connected')
        return lastresponse

    def _send_ipmi_net_payload(self, netfn=None, command=None, data=(), code=0,
                               bridge_request=None,
                               retry=None, delay_xmit=None, timeout=None,
                               rslun=0):
        if retry is None:
            retry = not self.servermode
        if self.servermode:
            data = bytearray((code,)) + bytearray(data)
            if netfn is None:
                netfn = self.clientnetfn
            if command is None:
                command = self.clientcommand
        else:
            data = bytearray(data)
        ipmipayload = self._make_ipmi_payload(netfn, command, bridge_request,
                                              data, rslun)
        payload_type = constants.payload_types['ipmi']
        self.send_payload(payload=ipmipayload, payload_type=payload_type,
                          retry=retry, delay_xmit=delay_xmit, timeout=timeout)

    def send_payload(self, payload=(), payload_type=None, retry=True,
                     delay_xmit=None, needskeepalive=False, timeout=None):
        """Send payload over the IPMI Session

        :param needskeepalive: If the payload is expected not to count as
                               'active' by the BMC, set this to True
                               to avoid Session considering the
                               job done because of this payload.
                               Notably, 0-length SOL packets
                               are prone to confusion.
        :param timeout: Specify a custom timeout for long-running request
        """
        if payload and self.lastpayload:
            # we already have a packet outgoing, make this
            # a pending payload
            # this way a simplistic BMC won't get confused
            # and we also avoid having to do more complicated
            # retry mechanism where each payload is
            # retried separately
            self.pendingpayloads.append((payload, payload_type, retry))
            return
        if payload_type is None:
            payload_type = self.last_payload_type
        if not payload:
            payload = self.lastpayload
        message = bytearray(b'\x06\x00\xff\x07')  # constant IPMI RMCP header
        if retry:
            self.lastpayload = payload
            self.last_payload_type = payload_type
        if not isinstance(payload, bytearray):
            payload = bytearray(payload)
        message.append(self.authtype)
        baretype = payload_type
        if self.integrityalgo:
            payload_type |= 0b01000000
        if self.confalgo:
            payload_type |= 0b10000000
        if self.ipmiversion == 2.0:
            message.append(payload_type)
            if baretype == 2:
                # TODO(jbjohnso): OEM payload types
                raise NotImplementedError("OEM Payloads")
            elif baretype not in constants.payload_types.values():
                raise NotImplementedError(
                    "Unrecognized payload type %d" % baretype)
            message += struct.pack("<I", self.sessionid)
        message += struct.pack("<I", self.sequencenumber)
        if self.ipmiversion == 1.5:
            message += struct.pack("<I", self.sessionid)
            if not self.authtype == 0:
                message += self._ipmi15authcode(payload)
            message.append(len(payload))
            message += payload
            # Guessing the ipmi spec means the whole
            totlen = 34 + len(message)
            # packet and assume no tag in old 1.5 world
            if totlen in (56, 84, 112, 128, 156):
                message.append(0)  # Legacy pad as mandated by ipmi spec
        elif self.ipmiversion == 2.0:
            psize = len(payload)
            if self.confalgo:
                pad = (psize + 1) % 16  # pad has to cope with one byte
                # field like the _aespad function
                if pad:  # if no pad needed, then we take no more action
                    pad = 16 - pad
                # new payload size grew according to pad
                newpsize = psize + pad + 17
                # size, plus pad length, plus 16 byte IV
                # (Table 13-20)
                message.append(newpsize & 0xff)
                message.append(newpsize >> 8)
                iv = os.urandom(16)
                message += iv
                payloadtocrypt = bytes(payload + _aespad(payload))
                crypter = Cipher(
                    algorithm=algorithms.AES(self.aeskey),
                    mode=modes.CBC(iv),
                    backend=self._crypto_backend
                )
                encryptor = crypter.encryptor()
                message += encryptor.update(payloadtocrypt
                                            ) + encryptor.finalize()
            else:  # no confidetiality algorithm
                message.append(psize & 0xff)
                message.append(psize >> 8)
                message += payload
            if self.integrityalgo:  # see table 13-8,
                # RMCP+ packet format
                # TODO(jbjohnso): SHA256 which is now
                # allowed
                neededpad = (len(message) - 2) % 4
                if neededpad:
                    neededpad = 4 - neededpad
                message += b'\xff' * neededpad
                message.append(neededpad)
                message.append(7)  # reserved, 7 is the required value for the
                # specification followed
                message += hmac.new(
                    self.k1, bytes(message[4:]),
                    self.currhashlib).digest()[:self.currhashlen]
                # per RFC2404 truncates to 96 bits
        self.netpacket = message
        # advance idle timer since we don't need keepalive while sending
        # packets out naturally
        self._xmit_packet(retry, delay_xmit=delay_xmit, timeout=timeout)

    def _ipmi15authcode(self, payload, checkremotecode=False):
        # checkremotecode is used to verify remote code,
        # otherwise this function is used to general authcode for local
        if self.authtype == 0:
            # Only for things before auth in ipmi 1.5, not
            # like 2.0 cipher suite 0
            return ()
        password = self.password
        padneeded = 16 - len(password)
        if padneeded < 0:
            raise exc.IpmiException("Password is too long for ipmi 1.5")
        password += '\x00' * padneeded
        if checkremotecode:
            seqbytes = struct.pack("<I", self.remseqnumber)
        else:
            seqbytes = struct.pack("<I", self.sequencenumber)
        sessdata = struct.pack("<I", self.sessionid)
        bodydata = password + sessdata + payload + seqbytes + password
        dgst = hashlib.md5(bodydata).digest()
        return dgst

    def _got_channel_auth_cap(self, response):
        if 'error' in response:
            self.onlogon(response)
            return
        self.maxtimeout = 6  # we have a confirmed bmc, be more tenacious
        if response['code'] == 0xcc and self.ipmi15only is not None:
            # tried ipmi 2.0 against a 1.5 which should work, but some bmcs
            # thought 'reserved' meant 'must be zero'
            self.ipmi15only = 1
            return self._get_channel_auth_cap()
        mysuffix = " while trying to get channel authentication capabalities"
        errstr = get_ipmi_error(response, suffix=mysuffix)
        if errstr:
            self.onlogon({'error': errstr})
            return
        data = response['data']
        self.currentchannel = data[0]
        if data[1] & 0b10000000 and data[3] & 0b10:  # ipmi 2.0 support
            self.ipmiversion = 2.0
        if self.ipmiversion == 1.5:
            if not (data[1] & 0b100):
                self.onlogon(
                    {'error':
                     "MD5 required but not enabled/available on target BMC"})
                return
            self._get_session_challenge()
        elif self.ipmiversion == 2.0:
            self._open_rmcpplus_request()

    def _got_session_challenge(self, response):
        errstr = get_ipmi_error(response,
                                suffix=" while getting session challenge")
        if errstr:
            self.onlogon({'error': errstr})
            return
        data = response['data']
        self.sessionid = struct.unpack("<I", bytes(data[0:4]))[0]
        self.authtype = 2
        self._activate_session(data[4:])

    # NOTE(jbjohnso):
    # This sends the activate session payload.  We pick '1' as the requested
    # sequence number without perturbing our real sequence number

    def _activate_session(self, data):
        rqdata = [2, 4] + list(data) + [1, 0, 0, 0]
        # TODO(jbjohnso): this always requests admin level (1.5)
        self.ipmicallback = self._activated_session
        self._send_ipmi_net_payload(netfn=0x6, command=0x3a, data=rqdata)

    def _activated_session(self, response):
        errstr = get_ipmi_error(response)
        if errstr:
            self.onlogon({'error': errstr})
            return
        data = response['data']
        self.sessionid = struct.unpack("<I", bytes(data[1:5]))[0]
        self.sequencenumber = struct.unpack("<I", bytes(data[5:9]))[0]
        self._req_priv_level()

    def _req_priv_level(self):
        self.logged = 1
        self.logoutexpiry = None
        response = self.raw_command(netfn=0x6, command=0x3b,
                                    data=[self.privlevel])
        if response['code']:
            if response['code'] in (0x80, 0x81) and self.privlevel == 4:
                # some implementations will let us get this far,
                # but suddenly get skiddish.  Try again in such a case
                self.privlevel = 3
                response = self.raw_command(netfn=0x6, command=0x3b,
                                            data=[self.privlevel])
            if response['code']:
                self.logged = 0
                self.logging = False
                mysuffix = " while requesting privelege level %d for %s" % (
                    self.privlevel, self.userid)
                errstr = get_ipmi_error(response, suffix=mysuffix)
                if errstr:
                    self.onlogon({'error': errstr})
                    return
        self.logging = False
        with util.protect(KEEPALIVE_SESSIONS):
            Session.keepalive_sessions[self] = {}
            Session.keepalive_sessions[self]['ipmisession'] = self
            Session.keepalive_sessions[self]['timeout'] = _monotonic_time() + \
                MAX_IDLE - (random.random() * 4.9)
        self.onlogon({'success': True})

    def _get_session_challenge(self):
        reqdata = bytearray([2])
        if len(self.userid) > 16:
            raise exc.IpmiException(
                "Username too long for IPMI, must not exceed 16")
        padneeded = 16 - len(self.userid)
        userid = self.userid + ('\x00' * padneeded)
        reqdata += userid
        self.ipmicallback = self._got_session_challenge
        self._send_ipmi_net_payload(netfn=0x6, command=0x39, data=reqdata)

    def _open_rmcpplus_request(self):
        self.authtype = 6
        # have unique local session ids to ignore aborted
        # login attempts from the past
        self.localsid += 1
        self.rmcptag += 1
        data = bytearray([
            self.rmcptag,
            0,  # request as much privilege as the channel will give us
            0, 0,  # reserved
        ])
        data += struct.pack("<I", self.localsid)
        # auth 3 sha256
        # integrity... 4 = sha256
        if self.attemptedhash == 1:
            data += bytearray([
                0, 0, 0, 8, 1, 0, 0, 0,  # table 13-17, SHA-1
                1, 0, 0, 8, 1, 0, 0, 0,  # SHA-1 integrity
                2, 0, 0, 8, 1, 0, 0, 0,  # AES privacy
                # 2,0,0,8,0,0,0,0, #no privacy confalgo
            ])
            self.currhashlib = hashlib.sha1
            self.currhashlen = 12
        else:
            data += bytearray([
                0, 0, 0, 8, 3, 0, 0, 0,  # table 13-17, SHA-256
                1, 0, 0, 8, 4, 0, 0, 0,  # SHA-256-128 integrity
                2, 0, 0, 8, 1, 0, 0, 0,  # AES privacy
                # 2,0,0,8,0,0,0,0, #no privacy confalgo
            ])
            self.currhashlib = hashlib.sha256
            self.currhashlen = 16
        self.sessioncontext = 'OPENSESSION'
        self.lastpayload = None
        self.send_payload(
            payload=data,
            payload_type=constants.payload_types['rmcpplusopenreq'])

    def _get_channel_auth_cap(self):
        self.ipmicallback = self._got_channel_auth_cap
        if self.ipmi15only:
            self._send_ipmi_net_payload(netfn=0x6,
                                        command=0x38,
                                        data=[0x0e, self.privlevel])
        else:
            self._send_ipmi_net_payload(netfn=0x6,
                                        command=0x38,
                                        data=[0x8e, self.privlevel])

    def login(self):
        self.logontries = 5
        self._initsession()
        self._get_channel_auth_cap()

    @classmethod
    def pause(cls, timeout):
        starttime = _monotonic_time()
        while _monotonic_time() - starttime < timeout:
            cls.wait_for_rsp(timeout - (_monotonic_time() - starttime))

    def wait_for_rsp(self, timeout=None, callout=True):
        """IPMI Session Event loop iteration

        This watches for any activity on IPMI handles and handles registered
        by register_handle_callback.  Callers are satisfied in the order that
        packets return from network, not in the order of calling.

        :param timeout: Maximum time to wait for data to come across.  If
                        unspecified, will autodetect based on earliest timeout
        """
        rdy = select.select([self.socket], [], [], timeout)[0]
        if rdy:
            self.process_pktqueue()

    def register_keepalive(self, cmd, callback):
        """Register  custom keepalive IPMI command

        This is mostly intended for use by the console code.
        calling code would have an easier time just scheduling in their
        own threading scheme.  Such a behavior would naturally cause
        the default keepalive to not occur anyway if the calling code
        is at least as aggressive about timing as pyghmi
        :param cmd: A dict of arguments to be passed into raw_command
        :param callback: A function to be called with results of the keepalive

        :returns: value to identify registration for unregister_keepalive
        """
        regid = random.random()
        if self._customkeepalives is None:
            self._customkeepalives = {regid: (cmd, callback)}
        else:
            while regid in self._customkeepalives:
                regid = random.random()
            self._customkeepalives[regid] = (cmd, callback)
        return regid

    def unregister_keepalive(self, regid):
        if self._customkeepalives is None:
            return
        try:
            del self._customkeepalives[regid]
        except KeyError:
            pass

    def _keepalive_wrapper(self, callback):
        # generates a wrapped keepalive to cleanup session state
        # and call callback if appropriate
        def _keptalive(response):
            self._generic_callback(response)
            response = self.lastresponse
            self.incommand = False
            while self.evq:
                self.evq.popleft().set()
            if callback:
                callback(response)

        return _keptalive

    def _keepalive(self):
        """Performs a keepalive to avoid idle disconnect"""

        try:
            keptalive = False
            if self._customkeepalives:
                kaids = list(self._customkeepalives.keys())
                for keepalive in kaids:
                    try:
                        cmd, callback = self._customkeepalives[keepalive]
                    except TypeError:
                        # raw_command made customkeepalives None
                        break
                    except KeyError:
                        # raw command ultimately caused a keepalive to
                        # deregister
                        continue
                    if callable(cmd):
                        cmd()
                        continue
                    keptalive = True
                    cmd['callback'] = self._keepalive_wrapper(callback)
                    self.raw_command(**cmd)
            if not keptalive:
                if self.incommand:
                    # if currently in command, no cause to keepalive
                    return
                if self.autokeepalive:
                    self.raw_command(netfn=6, command=1,
                                     callback=self._keepalive_wrapper(None))
                else:
                    self.logout()
        except exc.IpmiException:
            self._mark_broken()

    def process_pktqueue(self):
        ready = select.select([self.socket], [], [], 0.0)[0]
        while ready:
            pkt = self.socket.recvfrom(3000)
            ready = select.select([self.socket], [], [], 0.0)[0]
            data = bytearray(pkt[0])
            if not (data[0] == 6 and data[2:4] == b'\xff\x07'):
                continue
            # this should be in specific context, no need to check port
            # since recvfrom result was already routed to this object
            # specifically
            self._handle_ipmi_packet(data, sockaddr=pkt[1], qent=pkt)

    def _handle_ipmi_packet(self, data, sockaddr=None, qent=None):
        if self.sockaddr is None and sockaddr is not None:
            self.sockaddr = sockaddr
        elif (self.sockaddr is not None
              and sockaddr is not None
              and self.sockaddr != sockaddr):
            return  # here, we might have sent an ipv4 and ipv6 packet to kick
            # things off ignore the second reply since we have one
            # satisfactory answer
        if data[4] in (0, 2):  # This is an ipmi 1.5 paylod
            remseqnumber = struct.unpack('<I', bytes(data[5:9]))[0]
            remsessid = struct.unpack("<I", bytes(data[9:13]))[0]
            if (hasattr(self, 'remseqnumber')
                    and remseqnumber < self.remseqnumber):
                return -5  # remote sequence number is too low, reject it
            self.remseqnumber = remseqnumber
            if data[4] != self.authtype:
                # BMC responded with mismatch authtype, for
                # mutual authentication reject it. If this causes
                # legitimate issues, it's the vendor's fault
                return -2
            if remsessid != self.sessionid:
                return -1  # does not match our session id, drop it
            authcode = False
            if data[4] == 2:  # we have authcode in this ipmi 1.5 packet
                authcode = data[13:29]
                del data[13:29]
                # this is why we needed a mutable representation
            payload = data[14:14 + data[13]]
            if authcode:
                expectedauthcode = self._ipmi15authcode(payload,
                                                        checkremotecode=True)
                if expectedauthcode != authcode:
                    return
            self._parse_ipmi_payload(payload)
        elif data[4] == 6:
            self._handle_ipmi2_packet(data)
        else:
            return  # unrecognized data, assume evil

    def _got_rakp1(self, data):
        # stub, client sessions ignore rakp2
        pass

    def _got_rakp3(self, data):
        # stub, client sessions ignore rakp3
        pass

    def _got_rmcp_openrequest(self, data):
        pass

    def _handle_ipmi2_packet(self, data):
        ptype = data[5] & 0b00111111
        # the first 16 bytes are header information as can be seen in 13-8 that
        # we will toss out
        if ptype == 0x10:
            return self._got_rmcp_openrequest(data[16:])
        elif ptype == 0x11:  # rmcp+ response
            return self._got_rmcp_response(data[16:])
        elif ptype == 0x12:
            return self._got_rakp1(data[16:])
        elif ptype == 0x13:
            return self._got_rakp2(data[16:])
        elif ptype == 0x14:
            return self._got_rakp3(data[16:])
        elif ptype == 0x15:
            return self._got_rakp4(data[16:])
        elif ptype == 0 or ptype == 1:  # good old ipmi payload or sol
            # If endorsing a shared secret scheme, then at the very least it
            # needs to do mutual assurance
            if not (data[5] & 0b01000000):  # This would be the line that might
                # trip up some insecure BMC
                # implementation
                return
            encrypted = 0
            if data[5] & 0b10000000:
                encrypted = 1
            authcode = data[-self.currhashlen:]
            if self.k1 is None:  # we are in no shape to process a packet now
                return
            expectedauthcode = hmac.new(
                self.k1, data[4:-self.currhashlen],
                self.currhashlib).digest()[:self.currhashlen]
            if authcode != expectedauthcode:
                return  # BMC failed to assure integrity to us, drop it
            sid = struct.unpack("<I", bytes(data[6:10]))[0]
            if sid != self.localsid:  # session id mismatch, drop it
                return
            remseqnumber = struct.unpack("<I", bytes(data[10:14]))[0]
            if (hasattr(self, 'remseqnumber')
                    and (remseqnumber < self.remseqnumber)
                    and (self.remseqnumber != 0xffffffff)):
                return
            self.remseqnumber = remseqnumber
            psize = data[14] + (data[15] << 8)
            payload = data[16:16 + psize]
            if encrypted:
                iv = data[16:32]
                crypter = Cipher(
                    algorithm=algorithms.AES(self.aeskey),
                    mode=modes.CBC(bytes(iv)),
                    backend=self._crypto_backend
                )
                decryptor = crypter.decryptor()
                payload = bytearray(decryptor.update(bytes(payload[16:])
                                                     ) + decryptor.finalize())
                padsize = payload[-1] + 1
                payload = payload[:-padsize]
            if ptype == 0:
                self._parse_ipmi_payload(payload)
            elif ptype == 1:  # There should be no other option
                if (payload[1] & 0b1111) and self.last_payload_type == 1:
                    # for ptype 1, the 4 least significant bits of 2nd byte
                    # is  the ACK number.
                    # if it isn't an ACK at all, we'll keep retrying, however
                    # if it's a subtle SOL situation (partial ACK, wrong ACK)
                    # then sol_handler will have to resubmit and we will
                    # stop the generic retry behavior here
                    self.lastpayload = None
                    self.last_payload_type = None
                    with util.protect(WAITING_SESSIONS):
                        Session.waiting_sessions.pop(self, None)
                    if len(self.pendingpayloads) > 0:
                        (nextpayload, nextpayloadtype, retry) = \
                            self.pendingpayloads.popleft()
                        self.send_payload(payload=nextpayload,
                                          payload_type=nextpayloadtype,
                                          retry=retry)
                if self.sol_handler:
                    self.sol_handler(payload)

    def _got_rmcp_response(self, data):
        # see RMCP+ open session response table
        if not (self.sessioncontext and self.sessioncontext != "Established"):
            return -9
            # ignore payload as we are not in a state valid it
        if data[0] != self.rmcptag:
            return -9  # use rmcp tag to track and reject stale responses
        if data[1] != 0:  # response code...
            if self.attemptedhash == 256:
                self.attemptedhash = 1
                self._open_rmcpplus_request()
                return
            if data[1] in constants.rmcp_codes:
                errstr = constants.rmcp_codes[data[1]]
            else:
                errstr = "Unrecognized RMCP code %d" % data[1]
            self.onlogon({'error': errstr})
            return -9
        self.allowedpriv = data[2]
        # NOTE(jbjohnso): At this point, the BMC has no idea about what user
        # shall be used.  As such, the allowedpriv field is actually
        # not particularly useful.  got_rakp2 is a good place to
        # gracefully detect and downgrade privilege for retry
        localsid = struct.unpack("<I", bytes(data[4:8]))[0]
        if self.localsid != localsid:
            return -9
        self.pendingsessionid = struct.unpack("<I", bytes(data[8:12]))[0]
        # TODO(jbjohnso): currently, we take it for granted that the responder
        # accepted our integrity/auth/confidentiality proposal
        self.lastpayload = None
        self._send_rakp1()

    def _send_rakp1(self):
        self.rmcptag += 1
        self.randombytes = os.urandom(16)
        userlen = len(self.userid)
        payload = bytearray([self.rmcptag, 0, 0, 0]) + \
            struct.pack("<I", self.pendingsessionid) + \
            self.randombytes +\
            bytearray([self.nameonly | self.privlevel, 0, 0, userlen]) + \
            self.userid
        self.sessioncontext = "EXPECTINGRAKP2"
        self.send_payload(
            payload=payload, payload_type=constants.payload_types['rakp1'])

    def _got_rakp2(self, data):
        if not (self.sessioncontext in ('EXPECTINGRAKP2', 'EXPECTINGRAKP4')):
            # if we are not expecting rakp2, ignore. In a retry
            # scenario, replying from stale RAKP2 after sending
            # RAKP3 seems to be best
            return -9
        if data[0] != self.rmcptag:  # ignore mismatched tags for retry logic
            return -9
        if data[1] != 0:  # if not successful, consider next move
            if data[1] in (9, 0xd) and self.privlevel == 4 and self.autopriv:
                # Here the situation is likely that the peer didn't want
                # us to use admin.  Degrade to operator and try again
                self.privlevel = 3
                self.login()
                return
            # invalid sessionid 99% of the time means a retry
            # scenario invalidated an in-flight transaction
            if data[1] == 2:
                return
            if data[1] in constants.rmcp_codes:
                errstr = constants.rmcp_codes[data[1]]
            else:
                errstr = "Unrecognized RMCP code %d" % data[1]
            self.onlogon({'error': errstr + " in RAKP2"})
            return -9
        localsid = struct.unpack("<I", bytes(data[4:8]))[0]
        if localsid != self.localsid:
            return -9  # discard mismatch in the session identifier
        self.remoterandombytes = bytes(data[8:24])
        self.remoteguid = bytes(data[24:40])
        userlen = len(self.userid)
        hmacdata = (struct.pack("<II", localsid, self.pendingsessionid)
                    + self.randombytes + self.remoterandombytes
                    + self.remoteguid + struct.pack("2B", self.nameonly
                                                    | self.privlevel, userlen)
                    + self.userid)
        expectedhash = hmac.new(self.password, hmacdata,
                                self.currhashlib).digest()
        hashlen = len(expectedhash)
        givenhash = struct.pack("%dB" % hashlen, *data[40:hashlen + 40])
        if givenhash != expectedhash:
            self.sessioncontext = "FAILED"
            self.onlogon({'error': "Incorrect password provided"})
            return -9
        # We have now validated that the BMC and client agree on password, time
        # to store the keys
        self.sik = hmac.new(self.kg,
                            self.randombytes + self.remoterandombytes
                            + struct.pack("2B", self.nameonly
                                          | self.privlevel, userlen)
                            + self.userid, self.currhashlib).digest()
        self.k1 = hmac.new(self.sik, b'\x01' * 20, self.currhashlib).digest()
        self.k2 = hmac.new(self.sik, b'\x02' * 20, self.currhashlib).digest()
        self.aeskey = self.k2[0:16]
        self.sessioncontext = "EXPECTINGRAKP4"
        self.lastpayload = None
        self._send_rakp3()

    def _send_rakp3(self):  # rakp message 3
        self.rmcptag += 1
        # rmcptag, then status 0, then two reserved 0s
        payload = [self.rmcptag, 0, 0, 0] +\
            list(struct.unpack("4B", struct.pack("<I", self.pendingsessionid)))
        hmacdata = self.remoterandombytes +\
            struct.pack("<I", self.localsid) +\
            struct.pack("2B", self.nameonly | self.privlevel,
                        len(self.userid)) +\
            self.userid

        authcode = hmac.new(self.password, hmacdata, self.currhashlib).digest()
        payload += list(struct.unpack("%dB" % len(authcode), authcode))
        self.send_payload(
            payload=payload, payload_type=constants.payload_types['rakp3'])

    def _relog(self):
        self._initsession()
        self.logontries -= 1
        return self._get_channel_auth_cap()

    def _got_rakp4(self, data):
        if self.sessioncontext != "EXPECTINGRAKP4" or data[0] != self.rmcptag:
            return -9
        if data[1] != 0:
            if data[1] == 2 and self.logontries:  # if we retried RAKP3 because
                # RAKP4 got dropped, BMC can consider it done and we must
                # restart
                self._relog()
            # ignore 15 value if we are retrying.
            # xCAT did but I can't recall why exactly
            if data[1] == 15 and self.logontries:
                # TODO(jbjohnso) jog my memory to update the comment
                return
            if data[1] in constants.rmcp_codes:
                errstr = constants.rmcp_codes[data[1]]
            else:
                errstr = "Unrecognized RMCP code %d" % data[1]
            self.onlogon({'error': errstr + " reported in RAKP4"})
            return -9
        localsid = struct.unpack("<I", bytes(data[4:8]))[0]
        if localsid != self.localsid:  # ignore if wrong session id indicated
            return -9
        hmacdata = self.randombytes +\
            struct.pack("<I", self.pendingsessionid) +\
            self.remoteguid
        expectedauthcode = hmac.new(
            self.sik, hmacdata, self.currhashlib).digest()[:self.currhashlen]
        aclen = len(expectedauthcode)
        authcode = struct.pack("%dB" % aclen, *data[8:aclen + 8])
        if authcode != expectedauthcode:
            self.onlogon({'error': "Invalid RAKP4 integrity code (wrong Kg?)"})
            return
        self.sessionid = self.pendingsessionid
        self.integrityalgo = self.attemptedhash
        self.confalgo = 'aes'
        self.sequencenumber = 1
        self.sessioncontext = 'ESTABLISHED'
        self.lastpayload = None
        self._req_priv_level()

    # Internal function to parse IPMI nugget once extracted from its framing
    def _parse_ipmi_payload(self, payload):
        # For now, skip the checksums since we are in LAN only,
        # TODO(jbjohnso): if implementing other channels, add checksum checks
        # here
        if len(payload) < 7:
            # This cannot possibly be a valid IPMI packet.  Note this is after
            # the integrity checks, so this must be a buggy BMC packet
            # One example was a BMC that if receiving an SOL deactivate
            # from another party would emit what looks to be an attempt
            # at SOL deactivation payload, but with the wrong payload type
            # since we can't do anything remotely sane with such a packet,
            # drop it and carry about our business.
            return
        entry = (payload[1] >> 2, payload[4] >> 2, payload[5])
        if self._lookup_request_entry(entry):
            self._remove_request_entry(entry)

            # NOTE(fengqian): for bridge request, we need to handle the
            # response twice. First response shows if message send correctly,
            # second response is the real response.
            # If the message is send crrectly, we will discard the first
            # response or else error message will be parsed and return.
            if ((entry[0] in [0x06, 0x07])
                    and (entry[2] == 0x34)
                    and (payload[-2] == 0x0)):
                return -1
            else:
                self._parse_payload(payload)
                # NOTE(fengqian): recheck if the certain entry is removed in
                # case that bridge request failed.
                if self.request_entry:
                    self._remove_request_entry((self.expectednetfn,
                                                self.seqlun, self.expectedcmd))
        else:
            # payload is not a match for our last packet
            # it is also not a bridge request.
            return -1

    def _parse_payload(self, payload):
        if hasattr(self, 'hasretried') and self.hasretried:
            self.hasretried = 0
            # try to skip it for at most 16 cycles of overflow
            self.tabooseq[
                (self.expectednetfn, self.expectedcmd, self.seqlun)] = 16
        # We want to now remember that we do not have an expected packet
        # bigger than one byte means it can never match the one byte value
        # by mistake
        self.expectednetfn = 0x1ff
        self.expectedcmd = 0x1ff
        if not self.servermode:
            self.seqlun += 1  # prepare seqlun for next transmit
            self.seqlun &= 0x3f  # when overflowing, wrap around
        # render retry mechanism utterly incapable of
        # doing anything, though it shouldn't matter
        self.lastpayload = None
        self.last_payload_type = None
        response = {'netfn': payload[1] >> 2}
        # ^^ remove header of rsaddr/netfn/lun/checksum/rq/seq/lun
        del payload[0:5]
        # remove the trailing checksum
        del payload[-1]
        response['command'] = payload[0]
        if self.servermode:
            del payload[0:1]
            response['data'] = payload
        else:
            response['code'] = payload[1]
            del payload[0:2]
            response['data'] = payload
        self.timeout = initialtimeout + (0.5 * random.random())
        if not self.servermode and len(self.pendingpayloads) > 0:
            (nextpayload, nextpayloadtype, retry) = \
                self.pendingpayloads.popleft()
            self.send_payload(payload=nextpayload,
                              payload_type=nextpayloadtype,
                              retry=retry)
        self.ipmicallback(response)

    def _timedout(self):
        if not self.lastpayload:
            return
        self.nowait = True
        self.timeout += 1
        if self.timeout > self.maxtimeout:
            response = {'error': 'timeout', 'code': 0xffff}
            self.ipmicallback(response)
            self.nowait = False
            self._mark_broken()
            return
        elif self.sessioncontext == 'FAILED':
            self.lastpayload = None
            self.nowait = False
            return
        if self.sessioncontext == 'OPENSESSION':
            # In this case, we want to craft a new session request to have
            # unambiguous session id regardless of how packet was dropped or
            # delayed in this case, it's safe to just redo the request
            self.lastpayload = None
            self._open_rmcpplus_request()
        elif (self.sessioncontext == 'EXPECTINGRAKP2'
              or self.sessioncontext == 'EXPECTINGRAKP4'):
            # If we can't be sure which RAKP was dropped or if RAKP3/4 was just
            # delayed, the most reliable thing to do is rewind and start over
            # bmcs do not take kindly to receiving RAKP1 or RAKP3 twice
            self.lastpayload = None
            self._relog()
        else:  # in IPMI case, the only recourse is to act as if the packet is
            # idempotent.  SOL has more sophisticated retry handling
            # the biggest risks are reset sp which is often fruitless to retry
            # and chassis reset, which sometimes will shoot itself
            # systematically in the head in a shared port case making replies
            # impossible
            self.hasretried = 1  # remember so that we can track taboo
            # combinations
            # of sequence number, netfn, and lun due to
            # ambiguity on the wire
            self.send_payload()
        self.nowait = False

    def _xmit_packet(self, retry=True, delay_xmit=None, timeout=None):
        if self.sequencenumber:  # seq number of zero will be left alone, it is
            # special, otherwise increment
            self.sequencenumber += 1
        if delay_xmit is not None:
            select.select([self.socket], [], [], delay_xmit)
        if self.sockaddr:
            self.socket.sendto(self.netpacket, self.sockaddr)
        else:
            # he have not yet picked a working sockaddr for this connection,
            # try all the candidates that getaddrinfo provides
            self.allsockaddrs = []
            try:
                for res in socket.getaddrinfo(self.bmc,
                                              self.port,
                                              0,
                                              socket.SOCK_DGRAM):
                    sockaddr = res[4]
                    if ipv6support and res[0] == socket.AF_INET:
                        # convert the sockaddr to AF_INET6
                        newhost = '::ffff:' + sockaddr[0]
                        sockaddr = (newhost, sockaddr[1], 0, 0)
                    self.allsockaddrs.append(sockaddr)
                    self.socket.sendto(self.netpacket, sockaddr)
            except socket.gaierror:
                raise exc.IpmiException(
                    "Unable to transmit to specified address")
        if retry:
            # TODO(jjohnson2):  implement retry for simplesession
            pass

    def logout(self, sessionok=True):
        if not self.logged:
            return {'success': True}
        if self.cleaningup:
            self.nowait = True
        if self.sol_handler:
            self.raw_command(netfn=6, command=0x49, data=(1, 1, 0, 0, 0, 0),
                             retry=sessionok)
        self.raw_command(command=0x3c,
                         netfn=6,
                         data=struct.unpack("4B",
                                            struct.pack("I", self.sessionid)),
                         retry=False)
        # stop trying for a keepalive,
        self.lastpayload = None
        with util.protect(KEEPALIVE_SESSIONS):
            Session.keepalive_sessions.pop(self, None)
        self.logged = 0
        self.logging = False
        if self._customkeepalives:
            for ka in list(self._customkeepalives):
                # Be thorough and notify parties through their custom
                # keepalives.  In practice, this *should* be the same, but
                # if a code somehow makes duplicate SOL handlers,
                # this would notify all the handlers rather than just the
                # last one to take ownership
                self._customkeepalives[ka][1](
                    {'error': 'Session Disconnected'})
        self._customkeepalives = None
        self.broken = True
        self.nowait = False
        return {'success': True}


if __name__ == "__main__":
    import sys

    ipmis = Session(bmc=sys.argv[1],
                    userid=sys.argv[2],
                    password=os.environ['IPMIPASS'])
    print(ipmis.raw_command(command=2, data=[1], netfn=0))
    print(get_ipmi_error({'command': 8, 'code': 128, 'netfn': 1}))