1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135 1136 1137 1138 1139 1140 1141 1142 1143 1144 1145 1146 1147 1148 1149 1150 1151 1152 1153 1154 1155 1156 1157 1158 1159 1160 1161 1162 1163 1164 1165 1166 1167 1168 1169 1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182 1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199 1200 1201 1202 1203 1204 1205 1206 1207 1208 1209 1210 1211 1212 1213 1214 1215 1216 1217 1218 1219 1220 1221 1222 1223 1224 1225 1226 1227 1228 1229 1230 1231 1232 1233 1234 1235 1236 1237 1238 1239 1240 1241 1242 1243 1244 1245 1246 1247 1248 1249 1250 1251 1252 1253 1254 1255 1256 1257 1258 1259 1260 1261 1262 1263 1264 1265 1266 1267 1268 1269 1270 1271 1272 1273 1274 1275 1276 1277 1278 1279 1280 1281 1282 1283 1284 1285 1286 1287 1288 1289 1290 1291 1292 1293 1294 1295 1296 1297 1298 1299 1300 1301 1302 1303 1304 1305 1306 1307 1308 1309 1310 1311 1312 1313 1314 1315 1316 1317 1318 1319 1320 1321 1322 1323 1324 1325 1326 1327 1328 1329 1330 1331 1332 1333 1334 1335 1336 1337 1338 1339 1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351 1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383
|
/* Complex math module */
/* much code borrowed from mathmodule.c */
#ifndef Py_BUILD_CORE_BUILTIN
# define Py_BUILD_CORE_MODULE 1
#endif
#include "Python.h"
#include "pycore_complexobject.h" // _Py_c_neg()
#include "pycore_pymath.h" // _PY_SHORT_FLOAT_REPR
/* we need DBL_MAX, DBL_MIN, DBL_EPSILON, DBL_MANT_DIG and FLT_RADIX from
float.h. We assume that FLT_RADIX is either 2 or 16. */
#include <float.h>
/* For _Py_log1p with workarounds for buggy handling of zeros. */
#include "_math.h"
#include "clinic/cmathmodule.c.h"
/*[clinic input]
module cmath
[clinic start generated code]*/
/*[clinic end generated code: output=da39a3ee5e6b4b0d input=308d6839f4a46333]*/
/*[python input]
class Py_complex_protected_converter(Py_complex_converter):
def modify(self):
return 'errno = 0;'
class Py_complex_protected_return_converter(CReturnConverter):
type = "Py_complex"
def render(self, function, data):
self.declare(data)
data.return_conversion.append("""
if (errno == EDOM) {
PyErr_SetString(PyExc_ValueError, "math domain error");
goto exit;
}
else if (errno == ERANGE) {
PyErr_SetString(PyExc_OverflowError, "math range error");
goto exit;
}
else {
return_value = PyComplex_FromCComplex(_return_value);
}
""".strip())
[python start generated code]*/
/*[python end generated code: output=da39a3ee5e6b4b0d input=8b27adb674c08321]*/
#if (FLT_RADIX != 2 && FLT_RADIX != 16)
#error "Modules/cmathmodule.c expects FLT_RADIX to be 2 or 16"
#endif
#ifndef M_LN2
#define M_LN2 (0.6931471805599453094) /* natural log of 2 */
#endif
#ifndef M_LN10
#define M_LN10 (2.302585092994045684) /* natural log of 10 */
#endif
/*
CM_LARGE_DOUBLE is used to avoid spurious overflow in the sqrt, log,
inverse trig and inverse hyperbolic trig functions. Its log is used in the
evaluation of exp, cos, cosh, sin, sinh, tan, and tanh to avoid unnecessary
overflow.
*/
#define CM_LARGE_DOUBLE (DBL_MAX/4.)
#define CM_SQRT_LARGE_DOUBLE (sqrt(CM_LARGE_DOUBLE))
#define CM_LOG_LARGE_DOUBLE (log(CM_LARGE_DOUBLE))
#define CM_SQRT_DBL_MIN (sqrt(DBL_MIN))
/*
CM_SCALE_UP is an odd integer chosen such that multiplication by
2**CM_SCALE_UP is sufficient to turn a subnormal into a normal.
CM_SCALE_DOWN is (-(CM_SCALE_UP+1)/2). These scalings are used to compute
square roots accurately when the real and imaginary parts of the argument
are subnormal.
*/
#if FLT_RADIX==2
#define CM_SCALE_UP (2*(DBL_MANT_DIG/2) + 1)
#elif FLT_RADIX==16
#define CM_SCALE_UP (4*DBL_MANT_DIG+1)
#endif
#define CM_SCALE_DOWN (-(CM_SCALE_UP+1)/2)
/* forward declarations */
static Py_complex cmath_asinh_impl(PyObject *, Py_complex);
static Py_complex cmath_atanh_impl(PyObject *, Py_complex);
static Py_complex cmath_cosh_impl(PyObject *, Py_complex);
static Py_complex cmath_sinh_impl(PyObject *, Py_complex);
static Py_complex cmath_sqrt_impl(PyObject *, Py_complex);
static Py_complex cmath_tanh_impl(PyObject *, Py_complex);
static PyObject * math_error(void);
/* Code to deal with special values (infinities, NaNs, etc.). */
/* special_type takes a double and returns an integer code indicating
the type of the double as follows:
*/
enum special_types {
ST_NINF, /* 0, negative infinity */
ST_NEG, /* 1, negative finite number (nonzero) */
ST_NZERO, /* 2, -0. */
ST_PZERO, /* 3, +0. */
ST_POS, /* 4, positive finite number (nonzero) */
ST_PINF, /* 5, positive infinity */
ST_NAN /* 6, Not a Number */
};
static enum special_types
special_type(double d)
{
if (Py_IS_FINITE(d)) {
if (d != 0) {
if (copysign(1., d) == 1.)
return ST_POS;
else
return ST_NEG;
}
else {
if (copysign(1., d) == 1.)
return ST_PZERO;
else
return ST_NZERO;
}
}
if (Py_IS_NAN(d))
return ST_NAN;
if (copysign(1., d) == 1.)
return ST_PINF;
else
return ST_NINF;
}
#define SPECIAL_VALUE(z, table) \
if (!Py_IS_FINITE((z).real) || !Py_IS_FINITE((z).imag)) { \
errno = 0; \
return table[special_type((z).real)] \
[special_type((z).imag)]; \
}
#define P Py_MATH_PI
#define P14 0.25*Py_MATH_PI
#define P12 0.5*Py_MATH_PI
#define P34 0.75*Py_MATH_PI
#define INF Py_HUGE_VAL
#define N Py_NAN
#define U -9.5426319407711027e33 /* unlikely value, used as placeholder */
/* First, the C functions that do the real work. Each of the c_*
functions computes and returns the C99 Annex G recommended result
and also sets errno as follows: errno = 0 if no floating-point
exception is associated with the result; errno = EDOM if C99 Annex
G recommends raising divide-by-zero or invalid for this result; and
errno = ERANGE where the overflow floating-point signal should be
raised.
*/
static Py_complex acos_special_values[7][7];
/*[clinic input]
cmath.acos -> Py_complex_protected
z: Py_complex_protected
/
Return the arc cosine of z.
[clinic start generated code]*/
static Py_complex
cmath_acos_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=40bd42853fd460ae input=bd6cbd78ae851927]*/
{
Py_complex s1, s2, r;
SPECIAL_VALUE(z, acos_special_values);
if (fabs(z.real) > CM_LARGE_DOUBLE || fabs(z.imag) > CM_LARGE_DOUBLE) {
/* avoid unnecessary overflow for large arguments */
r.real = atan2(fabs(z.imag), z.real);
/* split into cases to make sure that the branch cut has the
correct continuity on systems with unsigned zeros */
if (z.real < 0.) {
r.imag = -copysign(log(hypot(z.real/2., z.imag/2.)) +
M_LN2*2., z.imag);
} else {
r.imag = copysign(log(hypot(z.real/2., z.imag/2.)) +
M_LN2*2., -z.imag);
}
} else {
s1.real = 1.-z.real;
s1.imag = -z.imag;
s1 = cmath_sqrt_impl(module, s1);
s2.real = 1.+z.real;
s2.imag = z.imag;
s2 = cmath_sqrt_impl(module, s2);
r.real = 2.*atan2(s1.real, s2.real);
r.imag = asinh(s2.real*s1.imag - s2.imag*s1.real);
}
errno = 0;
return r;
}
static Py_complex acosh_special_values[7][7];
/*[clinic input]
cmath.acosh = cmath.acos
Return the inverse hyperbolic cosine of z.
[clinic start generated code]*/
static Py_complex
cmath_acosh_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=3e2454d4fcf404ca input=3f61bee7d703e53c]*/
{
Py_complex s1, s2, r;
SPECIAL_VALUE(z, acosh_special_values);
if (fabs(z.real) > CM_LARGE_DOUBLE || fabs(z.imag) > CM_LARGE_DOUBLE) {
/* avoid unnecessary overflow for large arguments */
r.real = log(hypot(z.real/2., z.imag/2.)) + M_LN2*2.;
r.imag = atan2(z.imag, z.real);
} else {
s1.real = z.real - 1.;
s1.imag = z.imag;
s1 = cmath_sqrt_impl(module, s1);
s2.real = z.real + 1.;
s2.imag = z.imag;
s2 = cmath_sqrt_impl(module, s2);
r.real = asinh(s1.real*s2.real + s1.imag*s2.imag);
r.imag = 2.*atan2(s1.imag, s2.real);
}
errno = 0;
return r;
}
/*[clinic input]
cmath.asin = cmath.acos
Return the arc sine of z.
[clinic start generated code]*/
static Py_complex
cmath_asin_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=3b264cd1b16bf4e1 input=be0bf0cfdd5239c5]*/
{
/* asin(z) = -i asinh(iz) */
Py_complex s, r;
s.real = -z.imag;
s.imag = z.real;
s = cmath_asinh_impl(module, s);
r.real = s.imag;
r.imag = -s.real;
return r;
}
static Py_complex asinh_special_values[7][7];
/*[clinic input]
cmath.asinh = cmath.acos
Return the inverse hyperbolic sine of z.
[clinic start generated code]*/
static Py_complex
cmath_asinh_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=733d8107841a7599 input=5c09448fcfc89a79]*/
{
Py_complex s1, s2, r;
SPECIAL_VALUE(z, asinh_special_values);
if (fabs(z.real) > CM_LARGE_DOUBLE || fabs(z.imag) > CM_LARGE_DOUBLE) {
if (z.imag >= 0.) {
r.real = copysign(log(hypot(z.real/2., z.imag/2.)) +
M_LN2*2., z.real);
} else {
r.real = -copysign(log(hypot(z.real/2., z.imag/2.)) +
M_LN2*2., -z.real);
}
r.imag = atan2(z.imag, fabs(z.real));
} else {
s1.real = 1.+z.imag;
s1.imag = -z.real;
s1 = cmath_sqrt_impl(module, s1);
s2.real = 1.-z.imag;
s2.imag = z.real;
s2 = cmath_sqrt_impl(module, s2);
r.real = asinh(s1.real*s2.imag-s2.real*s1.imag);
r.imag = atan2(z.imag, s1.real*s2.real-s1.imag*s2.imag);
}
errno = 0;
return r;
}
/*[clinic input]
cmath.atan = cmath.acos
Return the arc tangent of z.
[clinic start generated code]*/
static Py_complex
cmath_atan_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=b6bfc497058acba4 input=3b21ff7d5eac632a]*/
{
/* atan(z) = -i atanh(iz) */
Py_complex s, r;
s.real = -z.imag;
s.imag = z.real;
s = cmath_atanh_impl(module, s);
r.real = s.imag;
r.imag = -s.real;
return r;
}
/* Windows screws up atan2 for inf and nan, and alpha Tru64 5.1 doesn't follow
C99 for atan2(0., 0.). */
static double
c_atan2(Py_complex z)
{
if (Py_IS_NAN(z.real) || Py_IS_NAN(z.imag))
return Py_NAN;
if (Py_IS_INFINITY(z.imag)) {
if (Py_IS_INFINITY(z.real)) {
if (copysign(1., z.real) == 1.)
/* atan2(+-inf, +inf) == +-pi/4 */
return copysign(0.25*Py_MATH_PI, z.imag);
else
/* atan2(+-inf, -inf) == +-pi*3/4 */
return copysign(0.75*Py_MATH_PI, z.imag);
}
/* atan2(+-inf, x) == +-pi/2 for finite x */
return copysign(0.5*Py_MATH_PI, z.imag);
}
if (Py_IS_INFINITY(z.real) || z.imag == 0.) {
if (copysign(1., z.real) == 1.)
/* atan2(+-y, +inf) = atan2(+-0, +x) = +-0. */
return copysign(0., z.imag);
else
/* atan2(+-y, -inf) = atan2(+-0., -x) = +-pi. */
return copysign(Py_MATH_PI, z.imag);
}
return atan2(z.imag, z.real);
}
static Py_complex atanh_special_values[7][7];
/*[clinic input]
cmath.atanh = cmath.acos
Return the inverse hyperbolic tangent of z.
[clinic start generated code]*/
static Py_complex
cmath_atanh_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=e83355f93a989c9e input=2b3fdb82fb34487b]*/
{
Py_complex r;
double ay, h;
SPECIAL_VALUE(z, atanh_special_values);
/* Reduce to case where z.real >= 0., using atanh(z) = -atanh(-z). */
if (z.real < 0.) {
return _Py_c_neg(cmath_atanh_impl(module, _Py_c_neg(z)));
}
ay = fabs(z.imag);
if (z.real > CM_SQRT_LARGE_DOUBLE || ay > CM_SQRT_LARGE_DOUBLE) {
/*
if abs(z) is large then we use the approximation
atanh(z) ~ 1/z +/- i*pi/2 (+/- depending on the sign
of z.imag)
*/
h = hypot(z.real/2., z.imag/2.); /* safe from overflow */
r.real = z.real/4./h/h;
/* the two negations in the next line cancel each other out
except when working with unsigned zeros: they're there to
ensure that the branch cut has the correct continuity on
systems that don't support signed zeros */
r.imag = -copysign(Py_MATH_PI/2., -z.imag);
errno = 0;
} else if (z.real == 1. && ay < CM_SQRT_DBL_MIN) {
/* C99 standard says: atanh(1+/-0.) should be inf +/- 0i */
if (ay == 0.) {
r.real = INF;
r.imag = z.imag;
errno = EDOM;
} else {
r.real = -log(sqrt(ay)/sqrt(hypot(ay, 2.)));
r.imag = copysign(atan2(2., -ay)/2, z.imag);
errno = 0;
}
} else {
r.real = m_log1p(4.*z.real/((1-z.real)*(1-z.real) + ay*ay))/4.;
r.imag = -atan2(-2.*z.imag, (1-z.real)*(1+z.real) - ay*ay)/2.;
errno = 0;
}
return r;
}
/*[clinic input]
cmath.cos = cmath.acos
Return the cosine of z.
[clinic start generated code]*/
static Py_complex
cmath_cos_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=fd64918d5b3186db input=6022e39b77127ac7]*/
{
/* cos(z) = cosh(iz) */
Py_complex r;
r.real = -z.imag;
r.imag = z.real;
r = cmath_cosh_impl(module, r);
return r;
}
/* cosh(infinity + i*y) needs to be dealt with specially */
static Py_complex cosh_special_values[7][7];
/*[clinic input]
cmath.cosh = cmath.acos
Return the hyperbolic cosine of z.
[clinic start generated code]*/
static Py_complex
cmath_cosh_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=2e969047da601bdb input=d6b66339e9cc332b]*/
{
Py_complex r;
double x_minus_one;
/* special treatment for cosh(+/-inf + iy) if y is not a NaN */
if (!Py_IS_FINITE(z.real) || !Py_IS_FINITE(z.imag)) {
if (Py_IS_INFINITY(z.real) && Py_IS_FINITE(z.imag) &&
(z.imag != 0.)) {
if (z.real > 0) {
r.real = copysign(INF, cos(z.imag));
r.imag = copysign(INF, sin(z.imag));
}
else {
r.real = copysign(INF, cos(z.imag));
r.imag = -copysign(INF, sin(z.imag));
}
}
else {
r = cosh_special_values[special_type(z.real)]
[special_type(z.imag)];
}
/* need to set errno = EDOM if y is +/- infinity and x is not
a NaN */
if (Py_IS_INFINITY(z.imag) && !Py_IS_NAN(z.real))
errno = EDOM;
else
errno = 0;
return r;
}
if (fabs(z.real) > CM_LOG_LARGE_DOUBLE) {
/* deal correctly with cases where cosh(z.real) overflows but
cosh(z) does not. */
x_minus_one = z.real - copysign(1., z.real);
r.real = cos(z.imag) * cosh(x_minus_one) * Py_MATH_E;
r.imag = sin(z.imag) * sinh(x_minus_one) * Py_MATH_E;
} else {
r.real = cos(z.imag) * cosh(z.real);
r.imag = sin(z.imag) * sinh(z.real);
}
/* detect overflow, and set errno accordingly */
if (Py_IS_INFINITY(r.real) || Py_IS_INFINITY(r.imag))
errno = ERANGE;
else
errno = 0;
return r;
}
/* exp(infinity + i*y) and exp(-infinity + i*y) need special treatment for
finite y */
static Py_complex exp_special_values[7][7];
/*[clinic input]
cmath.exp = cmath.acos
Return the exponential value e**z.
[clinic start generated code]*/
static Py_complex
cmath_exp_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=edcec61fb9dfda6c input=8b9e6cf8a92174c3]*/
{
Py_complex r;
double l;
if (!Py_IS_FINITE(z.real) || !Py_IS_FINITE(z.imag)) {
if (Py_IS_INFINITY(z.real) && Py_IS_FINITE(z.imag)
&& (z.imag != 0.)) {
if (z.real > 0) {
r.real = copysign(INF, cos(z.imag));
r.imag = copysign(INF, sin(z.imag));
}
else {
r.real = copysign(0., cos(z.imag));
r.imag = copysign(0., sin(z.imag));
}
}
else {
r = exp_special_values[special_type(z.real)]
[special_type(z.imag)];
}
/* need to set errno = EDOM if y is +/- infinity and x is not
a NaN and not -infinity */
if (Py_IS_INFINITY(z.imag) &&
(Py_IS_FINITE(z.real) ||
(Py_IS_INFINITY(z.real) && z.real > 0)))
errno = EDOM;
else
errno = 0;
return r;
}
if (z.real > CM_LOG_LARGE_DOUBLE) {
l = exp(z.real-1.);
r.real = l*cos(z.imag)*Py_MATH_E;
r.imag = l*sin(z.imag)*Py_MATH_E;
} else {
l = exp(z.real);
r.real = l*cos(z.imag);
r.imag = l*sin(z.imag);
}
/* detect overflow, and set errno accordingly */
if (Py_IS_INFINITY(r.real) || Py_IS_INFINITY(r.imag))
errno = ERANGE;
else
errno = 0;
return r;
}
static Py_complex log_special_values[7][7];
static Py_complex
c_log(Py_complex z)
{
/*
The usual formula for the real part is log(hypot(z.real, z.imag)).
There are four situations where this formula is potentially
problematic:
(1) the absolute value of z is subnormal. Then hypot is subnormal,
so has fewer than the usual number of bits of accuracy, hence may
have large relative error. This then gives a large absolute error
in the log. This can be solved by rescaling z by a suitable power
of 2.
(2) the absolute value of z is greater than DBL_MAX (e.g. when both
z.real and z.imag are within a factor of 1/sqrt(2) of DBL_MAX)
Again, rescaling solves this.
(3) the absolute value of z is close to 1. In this case it's
difficult to achieve good accuracy, at least in part because a
change of 1ulp in the real or imaginary part of z can result in a
change of billions of ulps in the correctly rounded answer.
(4) z = 0. The simplest thing to do here is to call the
floating-point log with an argument of 0, and let its behaviour
(returning -infinity, signaling a floating-point exception, setting
errno, or whatever) determine that of c_log. So the usual formula
is fine here.
*/
Py_complex r;
double ax, ay, am, an, h;
SPECIAL_VALUE(z, log_special_values);
ax = fabs(z.real);
ay = fabs(z.imag);
if (ax > CM_LARGE_DOUBLE || ay > CM_LARGE_DOUBLE) {
r.real = log(hypot(ax/2., ay/2.)) + M_LN2;
} else if (ax < DBL_MIN && ay < DBL_MIN) {
if (ax > 0. || ay > 0.) {
/* catch cases where hypot(ax, ay) is subnormal */
r.real = log(hypot(ldexp(ax, DBL_MANT_DIG),
ldexp(ay, DBL_MANT_DIG))) - DBL_MANT_DIG*M_LN2;
}
else {
/* log(+/-0. +/- 0i) */
r.real = -INF;
r.imag = atan2(z.imag, z.real);
errno = EDOM;
return r;
}
} else {
h = hypot(ax, ay);
if (0.71 <= h && h <= 1.73) {
am = ax > ay ? ax : ay; /* max(ax, ay) */
an = ax > ay ? ay : ax; /* min(ax, ay) */
r.real = m_log1p((am-1)*(am+1)+an*an)/2.;
} else {
r.real = log(h);
}
}
r.imag = atan2(z.imag, z.real);
errno = 0;
return r;
}
/*[clinic input]
cmath.log10 = cmath.acos
Return the base-10 logarithm of z.
[clinic start generated code]*/
static Py_complex
cmath_log10_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=2922779a7c38cbe1 input=cff5644f73c1519c]*/
{
Py_complex r;
int errno_save;
r = c_log(z);
errno_save = errno; /* just in case the divisions affect errno */
r.real = r.real / M_LN10;
r.imag = r.imag / M_LN10;
errno = errno_save;
return r;
}
/*[clinic input]
cmath.sin = cmath.acos
Return the sine of z.
[clinic start generated code]*/
static Py_complex
cmath_sin_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=980370d2ff0bb5aa input=2d3519842a8b4b85]*/
{
/* sin(z) = -i sin(iz) */
Py_complex s, r;
s.real = -z.imag;
s.imag = z.real;
s = cmath_sinh_impl(module, s);
r.real = s.imag;
r.imag = -s.real;
return r;
}
/* sinh(infinity + i*y) needs to be dealt with specially */
static Py_complex sinh_special_values[7][7];
/*[clinic input]
cmath.sinh = cmath.acos
Return the hyperbolic sine of z.
[clinic start generated code]*/
static Py_complex
cmath_sinh_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=38b0a6cce26f3536 input=d2d3fc8c1ddfd2dd]*/
{
Py_complex r;
double x_minus_one;
/* special treatment for sinh(+/-inf + iy) if y is finite and
nonzero */
if (!Py_IS_FINITE(z.real) || !Py_IS_FINITE(z.imag)) {
if (Py_IS_INFINITY(z.real) && Py_IS_FINITE(z.imag)
&& (z.imag != 0.)) {
if (z.real > 0) {
r.real = copysign(INF, cos(z.imag));
r.imag = copysign(INF, sin(z.imag));
}
else {
r.real = -copysign(INF, cos(z.imag));
r.imag = copysign(INF, sin(z.imag));
}
}
else {
r = sinh_special_values[special_type(z.real)]
[special_type(z.imag)];
}
/* need to set errno = EDOM if y is +/- infinity and x is not
a NaN */
if (Py_IS_INFINITY(z.imag) && !Py_IS_NAN(z.real))
errno = EDOM;
else
errno = 0;
return r;
}
if (fabs(z.real) > CM_LOG_LARGE_DOUBLE) {
x_minus_one = z.real - copysign(1., z.real);
r.real = cos(z.imag) * sinh(x_minus_one) * Py_MATH_E;
r.imag = sin(z.imag) * cosh(x_minus_one) * Py_MATH_E;
} else {
r.real = cos(z.imag) * sinh(z.real);
r.imag = sin(z.imag) * cosh(z.real);
}
/* detect overflow, and set errno accordingly */
if (Py_IS_INFINITY(r.real) || Py_IS_INFINITY(r.imag))
errno = ERANGE;
else
errno = 0;
return r;
}
static Py_complex sqrt_special_values[7][7];
/*[clinic input]
cmath.sqrt = cmath.acos
Return the square root of z.
[clinic start generated code]*/
static Py_complex
cmath_sqrt_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=b6507b3029c339fc input=7088b166fc9a58c7]*/
{
/*
Method: use symmetries to reduce to the case when x = z.real and y
= z.imag are nonnegative. Then the real part of the result is
given by
s = sqrt((x + hypot(x, y))/2)
and the imaginary part is
d = (y/2)/s
If either x or y is very large then there's a risk of overflow in
computation of the expression x + hypot(x, y). We can avoid this
by rewriting the formula for s as:
s = 2*sqrt(x/8 + hypot(x/8, y/8))
This costs us two extra multiplications/divisions, but avoids the
overhead of checking for x and y large.
If both x and y are subnormal then hypot(x, y) may also be
subnormal, so will lack full precision. We solve this by rescaling
x and y by a sufficiently large power of 2 to ensure that x and y
are normal.
*/
Py_complex r;
double s,d;
double ax, ay;
SPECIAL_VALUE(z, sqrt_special_values);
if (z.real == 0. && z.imag == 0.) {
r.real = 0.;
r.imag = z.imag;
return r;
}
ax = fabs(z.real);
ay = fabs(z.imag);
if (ax < DBL_MIN && ay < DBL_MIN) {
/* here we catch cases where hypot(ax, ay) is subnormal */
ax = ldexp(ax, CM_SCALE_UP);
s = ldexp(sqrt(ax + hypot(ax, ldexp(ay, CM_SCALE_UP))),
CM_SCALE_DOWN);
} else {
ax /= 8.;
s = 2.*sqrt(ax + hypot(ax, ay/8.));
}
d = ay/(2.*s);
if (z.real >= 0.) {
r.real = s;
r.imag = copysign(d, z.imag);
} else {
r.real = d;
r.imag = copysign(s, z.imag);
}
errno = 0;
return r;
}
/*[clinic input]
cmath.tan = cmath.acos
Return the tangent of z.
[clinic start generated code]*/
static Py_complex
cmath_tan_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=7c5f13158a72eb13 input=fc167e528767888e]*/
{
/* tan(z) = -i tanh(iz) */
Py_complex s, r;
s.real = -z.imag;
s.imag = z.real;
s = cmath_tanh_impl(module, s);
r.real = s.imag;
r.imag = -s.real;
return r;
}
/* tanh(infinity + i*y) needs to be dealt with specially */
static Py_complex tanh_special_values[7][7];
/*[clinic input]
cmath.tanh = cmath.acos
Return the hyperbolic tangent of z.
[clinic start generated code]*/
static Py_complex
cmath_tanh_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=36d547ef7aca116c input=22f67f9dc6d29685]*/
{
/* Formula:
tanh(x+iy) = (tanh(x)(1+tan(y)^2) + i tan(y)(1-tanh(x))^2) /
(1+tan(y)^2 tanh(x)^2)
To avoid excessive roundoff error, 1-tanh(x)^2 is better computed
as 1/cosh(x)^2. When abs(x) is large, we approximate 1-tanh(x)^2
by 4 exp(-2*x) instead, to avoid possible overflow in the
computation of cosh(x).
*/
Py_complex r;
double tx, ty, cx, txty, denom;
/* special treatment for tanh(+/-inf + iy) if y is finite and
nonzero */
if (!Py_IS_FINITE(z.real) || !Py_IS_FINITE(z.imag)) {
if (Py_IS_INFINITY(z.real) && Py_IS_FINITE(z.imag)
&& (z.imag != 0.)) {
if (z.real > 0) {
r.real = 1.0;
r.imag = copysign(0.,
2.*sin(z.imag)*cos(z.imag));
}
else {
r.real = -1.0;
r.imag = copysign(0.,
2.*sin(z.imag)*cos(z.imag));
}
}
else {
r = tanh_special_values[special_type(z.real)]
[special_type(z.imag)];
}
/* need to set errno = EDOM if z.imag is +/-infinity and
z.real is finite */
if (Py_IS_INFINITY(z.imag) && Py_IS_FINITE(z.real))
errno = EDOM;
else
errno = 0;
return r;
}
/* danger of overflow in 2.*z.imag !*/
if (fabs(z.real) > CM_LOG_LARGE_DOUBLE) {
r.real = copysign(1., z.real);
r.imag = 4.*sin(z.imag)*cos(z.imag)*exp(-2.*fabs(z.real));
} else {
tx = tanh(z.real);
ty = tan(z.imag);
cx = 1./cosh(z.real);
txty = tx*ty;
denom = 1. + txty*txty;
r.real = tx*(1.+ty*ty)/denom;
r.imag = ((ty/denom)*cx)*cx;
}
errno = 0;
return r;
}
/*[clinic input]
cmath.log
z as x: Py_complex
base as y_obj: object = NULL
/
log(z[, base]) -> the logarithm of z to the given base.
If the base is not specified, returns the natural logarithm (base e) of z.
[clinic start generated code]*/
static PyObject *
cmath_log_impl(PyObject *module, Py_complex x, PyObject *y_obj)
/*[clinic end generated code: output=4effdb7d258e0d94 input=e1f81d4fcfd26497]*/
{
Py_complex y;
errno = 0;
x = c_log(x);
if (y_obj != NULL) {
y = PyComplex_AsCComplex(y_obj);
if (PyErr_Occurred()) {
return NULL;
}
y = c_log(y);
x = _Py_c_quot(x, y);
}
if (errno != 0)
return math_error();
return PyComplex_FromCComplex(x);
}
/* And now the glue to make them available from Python: */
static PyObject *
math_error(void)
{
if (errno == EDOM)
PyErr_SetString(PyExc_ValueError, "math domain error");
else if (errno == ERANGE)
PyErr_SetString(PyExc_OverflowError, "math range error");
else /* Unexpected math error */
PyErr_SetFromErrno(PyExc_ValueError);
return NULL;
}
/*[clinic input]
cmath.phase
z: Py_complex
/
Return argument, also known as the phase angle, of a complex.
[clinic start generated code]*/
static PyObject *
cmath_phase_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=50725086a7bfd253 input=5cf75228ba94b69d]*/
{
double phi;
errno = 0;
phi = c_atan2(z); /* should not cause any exception */
if (errno != 0)
return math_error();
else
return PyFloat_FromDouble(phi);
}
/*[clinic input]
cmath.polar
z: Py_complex
/
Convert a complex from rectangular coordinates to polar coordinates.
r is the distance from 0 and phi the phase angle.
[clinic start generated code]*/
static PyObject *
cmath_polar_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=d0a8147c41dbb654 input=26c353574fd1a861]*/
{
double r, phi;
errno = 0;
phi = c_atan2(z); /* should not cause any exception */
r = _Py_c_abs(z); /* sets errno to ERANGE on overflow */
if (errno != 0)
return math_error();
else
return Py_BuildValue("dd", r, phi);
}
/*
rect() isn't covered by the C99 standard, but it's not too hard to
figure out 'spirit of C99' rules for special value handing:
rect(x, t) should behave like exp(log(x) + it) for positive-signed x
rect(x, t) should behave like -exp(log(-x) + it) for negative-signed x
rect(nan, t) should behave like exp(nan + it), except that rect(nan, 0)
gives nan +- i0 with the sign of the imaginary part unspecified.
*/
static Py_complex rect_special_values[7][7];
/*[clinic input]
cmath.rect
r: double
phi: double
/
Convert from polar coordinates to rectangular coordinates.
[clinic start generated code]*/
static PyObject *
cmath_rect_impl(PyObject *module, double r, double phi)
/*[clinic end generated code: output=385a0690925df2d5 input=24c5646d147efd69]*/
{
Py_complex z;
errno = 0;
/* deal with special values */
if (!Py_IS_FINITE(r) || !Py_IS_FINITE(phi)) {
/* if r is +/-infinity and phi is finite but nonzero then
result is (+-INF +-INF i), but we need to compute cos(phi)
and sin(phi) to figure out the signs. */
if (Py_IS_INFINITY(r) && (Py_IS_FINITE(phi)
&& (phi != 0.))) {
if (r > 0) {
z.real = copysign(INF, cos(phi));
z.imag = copysign(INF, sin(phi));
}
else {
z.real = -copysign(INF, cos(phi));
z.imag = -copysign(INF, sin(phi));
}
}
else {
z = rect_special_values[special_type(r)]
[special_type(phi)];
}
/* need to set errno = EDOM if r is a nonzero number and phi
is infinite */
if (r != 0. && !Py_IS_NAN(r) && Py_IS_INFINITY(phi))
errno = EDOM;
else
errno = 0;
}
else if (phi == 0.0) {
/* Workaround for buggy results with phi=-0.0 on OS X 10.8. See
bugs.python.org/issue18513. */
z.real = r;
z.imag = r * phi;
errno = 0;
}
else {
z.real = r * cos(phi);
z.imag = r * sin(phi);
errno = 0;
}
if (errno != 0)
return math_error();
else
return PyComplex_FromCComplex(z);
}
/*[clinic input]
cmath.isfinite = cmath.polar
Return True if both the real and imaginary parts of z are finite, else False.
[clinic start generated code]*/
static PyObject *
cmath_isfinite_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=ac76611e2c774a36 input=848e7ee701895815]*/
{
return PyBool_FromLong(Py_IS_FINITE(z.real) && Py_IS_FINITE(z.imag));
}
/*[clinic input]
cmath.isnan = cmath.polar
Checks if the real or imaginary part of z not a number (NaN).
[clinic start generated code]*/
static PyObject *
cmath_isnan_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=e7abf6e0b28beab7 input=71799f5d284c9baf]*/
{
return PyBool_FromLong(Py_IS_NAN(z.real) || Py_IS_NAN(z.imag));
}
/*[clinic input]
cmath.isinf = cmath.polar
Checks if the real or imaginary part of z is infinite.
[clinic start generated code]*/
static PyObject *
cmath_isinf_impl(PyObject *module, Py_complex z)
/*[clinic end generated code: output=502a75a79c773469 input=363df155c7181329]*/
{
return PyBool_FromLong(Py_IS_INFINITY(z.real) ||
Py_IS_INFINITY(z.imag));
}
/*[clinic input]
cmath.isclose -> bool
a: Py_complex
b: Py_complex
*
rel_tol: double = 1e-09
maximum difference for being considered "close", relative to the
magnitude of the input values
abs_tol: double = 0.0
maximum difference for being considered "close", regardless of the
magnitude of the input values
Determine whether two complex numbers are close in value.
Return True if a is close in value to b, and False otherwise.
For the values to be considered close, the difference between them must be
smaller than at least one of the tolerances.
-inf, inf and NaN behave similarly to the IEEE 754 Standard. That is, NaN is
not close to anything, even itself. inf and -inf are only close to themselves.
[clinic start generated code]*/
static int
cmath_isclose_impl(PyObject *module, Py_complex a, Py_complex b,
double rel_tol, double abs_tol)
/*[clinic end generated code: output=8a2486cc6e0014d1 input=df9636d7de1d4ac3]*/
{
double diff;
/* sanity check on the inputs */
if (rel_tol < 0.0 || abs_tol < 0.0 ) {
PyErr_SetString(PyExc_ValueError,
"tolerances must be non-negative");
return -1;
}
if ( (a.real == b.real) && (a.imag == b.imag) ) {
/* short circuit exact equality -- needed to catch two infinities of
the same sign. And perhaps speeds things up a bit sometimes.
*/
return 1;
}
/* This catches the case of two infinities of opposite sign, or
one infinity and one finite number. Two infinities of opposite
sign would otherwise have an infinite relative tolerance.
Two infinities of the same sign are caught by the equality check
above.
*/
if (Py_IS_INFINITY(a.real) || Py_IS_INFINITY(a.imag) ||
Py_IS_INFINITY(b.real) || Py_IS_INFINITY(b.imag)) {
return 0;
}
/* now do the regular computation
this is essentially the "weak" test from the Boost library
*/
diff = _Py_c_abs(_Py_c_diff(a, b));
return (((diff <= rel_tol * _Py_c_abs(b)) ||
(diff <= rel_tol * _Py_c_abs(a))) ||
(diff <= abs_tol));
}
PyDoc_STRVAR(module_doc,
"This module provides access to mathematical functions for complex\n"
"numbers.");
static PyMethodDef cmath_methods[] = {
CMATH_ACOS_METHODDEF
CMATH_ACOSH_METHODDEF
CMATH_ASIN_METHODDEF
CMATH_ASINH_METHODDEF
CMATH_ATAN_METHODDEF
CMATH_ATANH_METHODDEF
CMATH_COS_METHODDEF
CMATH_COSH_METHODDEF
CMATH_EXP_METHODDEF
CMATH_ISCLOSE_METHODDEF
CMATH_ISFINITE_METHODDEF
CMATH_ISINF_METHODDEF
CMATH_ISNAN_METHODDEF
CMATH_LOG_METHODDEF
CMATH_LOG10_METHODDEF
CMATH_PHASE_METHODDEF
CMATH_POLAR_METHODDEF
CMATH_RECT_METHODDEF
CMATH_SIN_METHODDEF
CMATH_SINH_METHODDEF
CMATH_SQRT_METHODDEF
CMATH_TAN_METHODDEF
CMATH_TANH_METHODDEF
{NULL, NULL} /* sentinel */
};
static int
cmath_exec(PyObject *mod)
{
if (PyModule_Add(mod, "pi", PyFloat_FromDouble(Py_MATH_PI)) < 0) {
return -1;
}
if (PyModule_Add(mod, "e", PyFloat_FromDouble(Py_MATH_E)) < 0) {
return -1;
}
// 2pi
if (PyModule_Add(mod, "tau", PyFloat_FromDouble(Py_MATH_TAU)) < 0) {
return -1;
}
if (PyModule_Add(mod, "inf", PyFloat_FromDouble(Py_INFINITY)) < 0) {
return -1;
}
Py_complex infj = {0.0, Py_INFINITY};
if (PyModule_Add(mod, "infj", PyComplex_FromCComplex(infj)) < 0) {
return -1;
}
if (PyModule_Add(mod, "nan", PyFloat_FromDouble(fabs(Py_NAN))) < 0) {
return -1;
}
Py_complex nanj = {0.0, fabs(Py_NAN)};
if (PyModule_Add(mod, "nanj", PyComplex_FromCComplex(nanj)) < 0) {
return -1;
}
/* initialize special value tables */
#define INIT_SPECIAL_VALUES(NAME, BODY) { Py_complex* p = (Py_complex*)NAME; BODY }
#define C(REAL, IMAG) p->real = REAL; p->imag = IMAG; ++p;
INIT_SPECIAL_VALUES(acos_special_values, {
C(P34,INF) C(P,INF) C(P,INF) C(P,-INF) C(P,-INF) C(P34,-INF) C(N,INF)
C(P12,INF) C(U,U) C(U,U) C(U,U) C(U,U) C(P12,-INF) C(N,N)
C(P12,INF) C(U,U) C(P12,0.) C(P12,-0.) C(U,U) C(P12,-INF) C(P12,N)
C(P12,INF) C(U,U) C(P12,0.) C(P12,-0.) C(U,U) C(P12,-INF) C(P12,N)
C(P12,INF) C(U,U) C(U,U) C(U,U) C(U,U) C(P12,-INF) C(N,N)
C(P14,INF) C(0.,INF) C(0.,INF) C(0.,-INF) C(0.,-INF) C(P14,-INF) C(N,INF)
C(N,INF) C(N,N) C(N,N) C(N,N) C(N,N) C(N,-INF) C(N,N)
})
INIT_SPECIAL_VALUES(acosh_special_values, {
C(INF,-P34) C(INF,-P) C(INF,-P) C(INF,P) C(INF,P) C(INF,P34) C(INF,N)
C(INF,-P12) C(U,U) C(U,U) C(U,U) C(U,U) C(INF,P12) C(N,N)
C(INF,-P12) C(U,U) C(0.,-P12) C(0.,P12) C(U,U) C(INF,P12) C(N,N)
C(INF,-P12) C(U,U) C(0.,-P12) C(0.,P12) C(U,U) C(INF,P12) C(N,N)
C(INF,-P12) C(U,U) C(U,U) C(U,U) C(U,U) C(INF,P12) C(N,N)
C(INF,-P14) C(INF,-0.) C(INF,-0.) C(INF,0.) C(INF,0.) C(INF,P14) C(INF,N)
C(INF,N) C(N,N) C(N,N) C(N,N) C(N,N) C(INF,N) C(N,N)
})
INIT_SPECIAL_VALUES(asinh_special_values, {
C(-INF,-P14) C(-INF,-0.) C(-INF,-0.) C(-INF,0.) C(-INF,0.) C(-INF,P14) C(-INF,N)
C(-INF,-P12) C(U,U) C(U,U) C(U,U) C(U,U) C(-INF,P12) C(N,N)
C(-INF,-P12) C(U,U) C(-0.,-0.) C(-0.,0.) C(U,U) C(-INF,P12) C(N,N)
C(INF,-P12) C(U,U) C(0.,-0.) C(0.,0.) C(U,U) C(INF,P12) C(N,N)
C(INF,-P12) C(U,U) C(U,U) C(U,U) C(U,U) C(INF,P12) C(N,N)
C(INF,-P14) C(INF,-0.) C(INF,-0.) C(INF,0.) C(INF,0.) C(INF,P14) C(INF,N)
C(INF,N) C(N,N) C(N,-0.) C(N,0.) C(N,N) C(INF,N) C(N,N)
})
INIT_SPECIAL_VALUES(atanh_special_values, {
C(-0.,-P12) C(-0.,-P12) C(-0.,-P12) C(-0.,P12) C(-0.,P12) C(-0.,P12) C(-0.,N)
C(-0.,-P12) C(U,U) C(U,U) C(U,U) C(U,U) C(-0.,P12) C(N,N)
C(-0.,-P12) C(U,U) C(-0.,-0.) C(-0.,0.) C(U,U) C(-0.,P12) C(-0.,N)
C(0.,-P12) C(U,U) C(0.,-0.) C(0.,0.) C(U,U) C(0.,P12) C(0.,N)
C(0.,-P12) C(U,U) C(U,U) C(U,U) C(U,U) C(0.,P12) C(N,N)
C(0.,-P12) C(0.,-P12) C(0.,-P12) C(0.,P12) C(0.,P12) C(0.,P12) C(0.,N)
C(0.,-P12) C(N,N) C(N,N) C(N,N) C(N,N) C(0.,P12) C(N,N)
})
INIT_SPECIAL_VALUES(cosh_special_values, {
C(INF,N) C(U,U) C(INF,0.) C(INF,-0.) C(U,U) C(INF,N) C(INF,N)
C(N,N) C(U,U) C(U,U) C(U,U) C(U,U) C(N,N) C(N,N)
C(N,0.) C(U,U) C(1.,0.) C(1.,-0.) C(U,U) C(N,0.) C(N,0.)
C(N,0.) C(U,U) C(1.,-0.) C(1.,0.) C(U,U) C(N,0.) C(N,0.)
C(N,N) C(U,U) C(U,U) C(U,U) C(U,U) C(N,N) C(N,N)
C(INF,N) C(U,U) C(INF,-0.) C(INF,0.) C(U,U) C(INF,N) C(INF,N)
C(N,N) C(N,N) C(N,0.) C(N,0.) C(N,N) C(N,N) C(N,N)
})
INIT_SPECIAL_VALUES(exp_special_values, {
C(0.,0.) C(U,U) C(0.,-0.) C(0.,0.) C(U,U) C(0.,0.) C(0.,0.)
C(N,N) C(U,U) C(U,U) C(U,U) C(U,U) C(N,N) C(N,N)
C(N,N) C(U,U) C(1.,-0.) C(1.,0.) C(U,U) C(N,N) C(N,N)
C(N,N) C(U,U) C(1.,-0.) C(1.,0.) C(U,U) C(N,N) C(N,N)
C(N,N) C(U,U) C(U,U) C(U,U) C(U,U) C(N,N) C(N,N)
C(INF,N) C(U,U) C(INF,-0.) C(INF,0.) C(U,U) C(INF,N) C(INF,N)
C(N,N) C(N,N) C(N,-0.) C(N,0.) C(N,N) C(N,N) C(N,N)
})
INIT_SPECIAL_VALUES(log_special_values, {
C(INF,-P34) C(INF,-P) C(INF,-P) C(INF,P) C(INF,P) C(INF,P34) C(INF,N)
C(INF,-P12) C(U,U) C(U,U) C(U,U) C(U,U) C(INF,P12) C(N,N)
C(INF,-P12) C(U,U) C(-INF,-P) C(-INF,P) C(U,U) C(INF,P12) C(N,N)
C(INF,-P12) C(U,U) C(-INF,-0.) C(-INF,0.) C(U,U) C(INF,P12) C(N,N)
C(INF,-P12) C(U,U) C(U,U) C(U,U) C(U,U) C(INF,P12) C(N,N)
C(INF,-P14) C(INF,-0.) C(INF,-0.) C(INF,0.) C(INF,0.) C(INF,P14) C(INF,N)
C(INF,N) C(N,N) C(N,N) C(N,N) C(N,N) C(INF,N) C(N,N)
})
INIT_SPECIAL_VALUES(sinh_special_values, {
C(INF,N) C(U,U) C(-INF,-0.) C(-INF,0.) C(U,U) C(INF,N) C(INF,N)
C(N,N) C(U,U) C(U,U) C(U,U) C(U,U) C(N,N) C(N,N)
C(0.,N) C(U,U) C(-0.,-0.) C(-0.,0.) C(U,U) C(0.,N) C(0.,N)
C(0.,N) C(U,U) C(0.,-0.) C(0.,0.) C(U,U) C(0.,N) C(0.,N)
C(N,N) C(U,U) C(U,U) C(U,U) C(U,U) C(N,N) C(N,N)
C(INF,N) C(U,U) C(INF,-0.) C(INF,0.) C(U,U) C(INF,N) C(INF,N)
C(N,N) C(N,N) C(N,-0.) C(N,0.) C(N,N) C(N,N) C(N,N)
})
INIT_SPECIAL_VALUES(sqrt_special_values, {
C(INF,-INF) C(0.,-INF) C(0.,-INF) C(0.,INF) C(0.,INF) C(INF,INF) C(N,INF)
C(INF,-INF) C(U,U) C(U,U) C(U,U) C(U,U) C(INF,INF) C(N,N)
C(INF,-INF) C(U,U) C(0.,-0.) C(0.,0.) C(U,U) C(INF,INF) C(N,N)
C(INF,-INF) C(U,U) C(0.,-0.) C(0.,0.) C(U,U) C(INF,INF) C(N,N)
C(INF,-INF) C(U,U) C(U,U) C(U,U) C(U,U) C(INF,INF) C(N,N)
C(INF,-INF) C(INF,-0.) C(INF,-0.) C(INF,0.) C(INF,0.) C(INF,INF) C(INF,N)
C(INF,-INF) C(N,N) C(N,N) C(N,N) C(N,N) C(INF,INF) C(N,N)
})
INIT_SPECIAL_VALUES(tanh_special_values, {
C(-1.,0.) C(U,U) C(-1.,-0.) C(-1.,0.) C(U,U) C(-1.,0.) C(-1.,0.)
C(N,N) C(U,U) C(U,U) C(U,U) C(U,U) C(N,N) C(N,N)
C(N,N) C(U,U) C(-0.,-0.) C(-0.,0.) C(U,U) C(N,N) C(N,N)
C(N,N) C(U,U) C(0.,-0.) C(0.,0.) C(U,U) C(N,N) C(N,N)
C(N,N) C(U,U) C(U,U) C(U,U) C(U,U) C(N,N) C(N,N)
C(1.,0.) C(U,U) C(1.,-0.) C(1.,0.) C(U,U) C(1.,0.) C(1.,0.)
C(N,N) C(N,N) C(N,-0.) C(N,0.) C(N,N) C(N,N) C(N,N)
})
INIT_SPECIAL_VALUES(rect_special_values, {
C(INF,N) C(U,U) C(-INF,0.) C(-INF,-0.) C(U,U) C(INF,N) C(INF,N)
C(N,N) C(U,U) C(U,U) C(U,U) C(U,U) C(N,N) C(N,N)
C(0.,0.) C(U,U) C(-0.,0.) C(-0.,-0.) C(U,U) C(0.,0.) C(0.,0.)
C(0.,0.) C(U,U) C(0.,-0.) C(0.,0.) C(U,U) C(0.,0.) C(0.,0.)
C(N,N) C(U,U) C(U,U) C(U,U) C(U,U) C(N,N) C(N,N)
C(INF,N) C(U,U) C(INF,-0.) C(INF,0.) C(U,U) C(INF,N) C(INF,N)
C(N,N) C(N,N) C(N,0.) C(N,0.) C(N,N) C(N,N) C(N,N)
})
return 0;
}
static PyModuleDef_Slot cmath_slots[] = {
{Py_mod_exec, cmath_exec},
{Py_mod_multiple_interpreters, Py_MOD_PER_INTERPRETER_GIL_SUPPORTED},
{Py_mod_gil, Py_MOD_GIL_NOT_USED},
{0, NULL}
};
static struct PyModuleDef cmathmodule = {
PyModuleDef_HEAD_INIT,
.m_name = "cmath",
.m_doc = module_doc,
.m_size = 0,
.m_methods = cmath_methods,
.m_slots = cmath_slots
};
PyMODINIT_FUNC
PyInit_cmath(void)
{
return PyModuleDef_Init(&cmathmodule);
}
|