:mod:`!faulthandler` --- Dump the Python traceback
==================================================

.. module:: faulthandler
   :synopsis: Dump the Python traceback.

.. versionadded:: 3.3

----------------

This module contains functions to dump Python tracebacks explicitly, on a fault,
after a timeout, or on a user signal. Call :func:`faulthandler.enable` to
install fault handlers for the :const:`~signal.SIGSEGV`,
:const:`~signal.SIGFPE`, :const:`~signal.SIGABRT`, :const:`~signal.SIGBUS`, and
:const:`~signal.SIGILL` signals. You can also
enable them at startup by setting the :envvar:`PYTHONFAULTHANDLER` environment
variable or by using the :option:`-X` ``faulthandler`` command line option.

The fault handler is compatible with system fault handlers like Apport or the
Windows fault handler. The module uses an alternative stack for signal handlers
if the :c:func:`!sigaltstack` function is available. This allows it to dump the
traceback even on a stack overflow.

The fault handler is called on catastrophic cases and therefore can only use
signal-safe functions (e.g. it cannot allocate memory on the heap). Because of
this limitation traceback dumping is minimal compared to normal Python
tracebacks:

* Only ASCII is supported. The ``backslashreplace`` error handler is used on
  encoding.
* Each string is limited to 500 characters.
* Only the filename, the function name and the line number are
  displayed. (no source code)
* It is limited to 100 frames and 100 threads.
* The order is reversed: the most recent call is shown first.

By default, the Python traceback is written to :data:`sys.stderr`. To see
tracebacks, applications must be run in the terminal. A log file can
alternatively be passed to :func:`faulthandler.enable`.

The module is implemented in C, so tracebacks can be dumped on a crash or when
Python is deadlocked.

The :ref:`Python Development Mode <devmode>` calls :func:`faulthandler.enable`
at Python startup.

.. seealso::

   Module :mod:`pdb`
      Interactive source code debugger for Python programs.

   Module :mod:`traceback`
      Standard interface to extract, format and print stack traces of Python programs.

Dumping the traceback
---------------------

.. function:: dump_traceback(file=sys.stderr, all_threads=True)

   Dump the tracebacks of all threads into *file*. If *all_threads* is
   ``False``, dump only the current thread.

   .. seealso:: :func:`traceback.print_tb`, which can be used to print a traceback object.

   .. versionchanged:: 3.5
      Added support for passing file descriptor to this function.


Dumping the C stack
-------------------

.. versionadded:: 3.14

.. function:: dump_c_stack(file=sys.stderr)

   Dump the C stack trace of the current thread into *file*.

   If the Python build does not support it or the operating system
   does not provide a stack trace, then this prints an error in place
   of a dumped C stack.

.. _c-stack-compatibility:

C Stack Compatibility
*********************

If the system does not support the C-level :manpage:`backtrace(3)`
or :manpage:`dladdr1(3)`, then C stack dumps will not work.
An error will be printed instead of the stack.

Additionally, some compilers do not support :term:`CPython's <CPython>`
implementation of C stack dumps. As a result, a different error may be printed
instead of the stack, even if the operating system supports dumping stacks.

.. note::

   Dumping C stacks can be arbitrarily slow, depending on the DWARF level
   of the binaries in the call stack.

Fault handler state
-------------------

.. function:: enable(file=sys.stderr, all_threads=True, c_stack=True)

   Enable the fault handler: install handlers for the :const:`~signal.SIGSEGV`,
   :const:`~signal.SIGFPE`, :const:`~signal.SIGABRT`, :const:`~signal.SIGBUS`
   and :const:`~signal.SIGILL`
   signals to dump the Python traceback. If *all_threads* is ``True``,
   produce tracebacks for every running thread. Otherwise, dump only the current
   thread.

   The *file* must be kept open until the fault handler is disabled: see
   :ref:`issue with file descriptors <faulthandler-fd>`.

   If *c_stack* is ``True``, then the C stack trace is printed after the Python
   traceback, unless the system does not support it. See :func:`dump_c_stack` for
   more information on compatibility.

   .. versionchanged:: 3.5
      Added support for passing file descriptor to this function.

   .. versionchanged:: 3.6
      On Windows, a handler for Windows exception is also installed.

   .. versionchanged:: 3.10
      The dump now mentions if a garbage collector collection is running
      if *all_threads* is true.

   .. versionchanged:: 3.14
      Only the current thread is dumped if the :term:`GIL` is disabled to
      prevent the risk of data races.

   .. versionchanged:: 3.14
      The dump now displays the C stack trace if *c_stack* is true.

.. function:: disable()

   Disable the fault handler: uninstall the signal handlers installed by
   :func:`enable`.

.. function:: is_enabled()

   Check if the fault handler is enabled.


Dumping the tracebacks after a timeout
--------------------------------------

.. function:: dump_traceback_later(timeout, repeat=False, file=sys.stderr, exit=False)

   Dump the tracebacks of all threads, after a timeout of *timeout* seconds, or
   every *timeout* seconds if *repeat* is ``True``.  If *exit* is ``True``, call
   :c:func:`!_exit` with status=1 after dumping the tracebacks.  (Note
   :c:func:`!_exit` exits the process immediately, which means it doesn't do any
   cleanup like flushing file buffers.) If the function is called twice, the new
   call replaces previous parameters and resets the timeout. The timer has a
   sub-second resolution.

   The *file* must be kept open until the traceback is dumped or
   :func:`cancel_dump_traceback_later` is called: see :ref:`issue with file
   descriptors <faulthandler-fd>`.

   This function is implemented using a watchdog thread.

   .. versionchanged:: 3.5
      Added support for passing file descriptor to this function.

   .. versionchanged:: 3.7
      This function is now always available.

.. function:: cancel_dump_traceback_later()

   Cancel the last call to :func:`dump_traceback_later`.


Dumping the traceback on a user signal
--------------------------------------

.. function:: register(signum, file=sys.stderr, all_threads=True, chain=False)

   Register a user signal: install a handler for the *signum* signal to dump
   the traceback of all threads, or of the current thread if *all_threads* is
   ``False``, into *file*. Call the previous handler if chain is ``True``.

   The *file* must be kept open until the signal is unregistered by
   :func:`unregister`: see :ref:`issue with file descriptors <faulthandler-fd>`.

   Not available on Windows.

   .. versionchanged:: 3.5
      Added support for passing file descriptor to this function.

.. function:: unregister(signum)

   Unregister a user signal: uninstall the handler of the *signum* signal
   installed by :func:`register`. Return ``True`` if the signal was registered,
   ``False`` otherwise.

   Not available on Windows.


.. _faulthandler-fd:

Issue with file descriptors
---------------------------

:func:`enable`, :func:`dump_traceback_later` and :func:`register` keep the
file descriptor of their *file* argument. If the file is closed and its file
descriptor is reused by a new file, or if :func:`os.dup2` is used to replace
the file descriptor, the traceback will be written into a different file. Call
these functions again each time that the file is replaced.


Example
-------

Example of a segmentation fault on Linux with and without enabling the fault
handler:

.. code-block:: shell-session

    $ python -c "import ctypes; ctypes.string_at(0)"
    Segmentation fault

    $ python -q -X faulthandler
    >>> import ctypes
    >>> ctypes.string_at(0)
    Fatal Python error: Segmentation fault

    Current thread 0x00007fb899f39700 (most recent call first):
      File "/opt/python/Lib/ctypes/__init__.py", line 486 in string_at
      File "<stdin>", line 1 in <module>

    Current thread's C stack trace (most recent call first):
      Binary file "/opt/python/python", at _Py_DumpStack+0x42 [0x5b27f7d7147e]
      Binary file "/opt/python/python", at +0x32dcbd [0x5b27f7d85cbd]
      Binary file "/opt/python/python", at +0x32df8a [0x5b27f7d85f8a]
      Binary file "/usr/lib/libc.so.6", at +0x3def0 [0x77b73226bef0]
      Binary file "/usr/lib/libc.so.6", at +0x17ef9c [0x77b7323acf9c]
      Binary file "/opt/python/build/lib.linux-x86_64-3.14/_ctypes.cpython-314d-x86_64-linux-gnu.so", at +0xcdf6 [0x77b7315dddf6]
      Binary file "/usr/lib/libffi.so.8", at +0x7976 [0x77b73158f976]
      Binary file "/usr/lib/libffi.so.8", at +0x413c [0x77b73158c13c]
      Binary file "/usr/lib/libffi.so.8", at ffi_call+0x12e [0x77b73158ef0e]
      Binary file "/opt/python/build/lib.linux-x86_64-3.14/_ctypes.cpython-314d-x86_64-linux-gnu.so", at +0x15a33 [0x77b7315e6a33]
      Binary file "/opt/python/build/lib.linux-x86_64-3.14/_ctypes.cpython-314d-x86_64-linux-gnu.so", at +0x164fa [0x77b7315e74fa]
      Binary file "/opt/python/build/lib.linux-x86_64-3.14/_ctypes.cpython-314d-x86_64-linux-gnu.so", at +0xc624 [0x77b7315dd624]
      Binary file "/opt/python/python", at _PyObject_MakeTpCall+0xce [0x5b27f7b73883]
      Binary file "/opt/python/python", at +0x11bab6 [0x5b27f7b73ab6]
      Binary file "/opt/python/python", at PyObject_Vectorcall+0x23 [0x5b27f7b73b04]
      Binary file "/opt/python/python", at _PyEval_EvalFrameDefault+0x490c [0x5b27f7cbb302]
      Binary file "/opt/python/python", at +0x2818e6 [0x5b27f7cd98e6]
      Binary file "/opt/python/python", at +0x281aab [0x5b27f7cd9aab]
      Binary file "/opt/python/python", at PyEval_EvalCode+0xc5 [0x5b27f7cd9ba3]
      Binary file "/opt/python/python", at +0x255957 [0x5b27f7cad957]
      Binary file "/opt/python/python", at +0x255ab4 [0x5b27f7cadab4]
      Binary file "/opt/python/python", at _PyEval_EvalFrameDefault+0x6c3e [0x5b27f7cbd634]
      Binary file "/opt/python/python", at +0x2818e6 [0x5b27f7cd98e6]
      Binary file "/opt/python/python", at +0x281aab [0x5b27f7cd9aab]
      Binary file "/opt/python/python", at +0x11b6e1 [0x5b27f7b736e1]
      Binary file "/opt/python/python", at +0x11d348 [0x5b27f7b75348]
      Binary file "/opt/python/python", at +0x11d626 [0x5b27f7b75626]
      Binary file "/opt/python/python", at PyObject_Call+0x20 [0x5b27f7b7565e]
      Binary file "/opt/python/python", at +0x32a67a [0x5b27f7d8267a]
      Binary file "/opt/python/python", at +0x32a7f8 [0x5b27f7d827f8]
      Binary file "/opt/python/python", at +0x32ac1b [0x5b27f7d82c1b]
      Binary file "/opt/python/python", at Py_RunMain+0x31 [0x5b27f7d82ebe]
      <truncated rest of calls>
    Segmentation fault