1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635
|
/*
* ARM AHB5 TrustZone Memory Protection Controller emulation
*
* Copyright (c) 2018 Linaro Limited
* Written by Peter Maydell
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 or
* (at your option) any later version.
*/
#include "qemu/osdep.h"
#include "qemu/log.h"
#include "qemu/module.h"
#include "qapi/error.h"
#include "trace.h"
#include "hw/sysbus.h"
#include "migration/vmstate.h"
#include "hw/registerfields.h"
#include "hw/irq.h"
#include "hw/misc/tz-mpc.h"
#include "hw/qdev-properties.h"
/* Our IOMMU has two IOMMU indexes, one for secure transactions and one for
* non-secure transactions.
*/
enum {
IOMMU_IDX_S,
IOMMU_IDX_NS,
IOMMU_NUM_INDEXES,
};
/* Config registers */
REG32(CTRL, 0x00)
FIELD(CTRL, SEC_RESP, 4, 1)
FIELD(CTRL, AUTOINC, 8, 1)
FIELD(CTRL, LOCKDOWN, 31, 1)
REG32(BLK_MAX, 0x10)
REG32(BLK_CFG, 0x14)
REG32(BLK_IDX, 0x18)
REG32(BLK_LUT, 0x1c)
REG32(INT_STAT, 0x20)
FIELD(INT_STAT, IRQ, 0, 1)
REG32(INT_CLEAR, 0x24)
FIELD(INT_CLEAR, IRQ, 0, 1)
REG32(INT_EN, 0x28)
FIELD(INT_EN, IRQ, 0, 1)
REG32(INT_INFO1, 0x2c)
REG32(INT_INFO2, 0x30)
FIELD(INT_INFO2, HMASTER, 0, 16)
FIELD(INT_INFO2, HNONSEC, 16, 1)
FIELD(INT_INFO2, CFG_NS, 17, 1)
REG32(INT_SET, 0x34)
FIELD(INT_SET, IRQ, 0, 1)
REG32(PIDR4, 0xfd0)
REG32(PIDR5, 0xfd4)
REG32(PIDR6, 0xfd8)
REG32(PIDR7, 0xfdc)
REG32(PIDR0, 0xfe0)
REG32(PIDR1, 0xfe4)
REG32(PIDR2, 0xfe8)
REG32(PIDR3, 0xfec)
REG32(CIDR0, 0xff0)
REG32(CIDR1, 0xff4)
REG32(CIDR2, 0xff8)
REG32(CIDR3, 0xffc)
static const uint8_t tz_mpc_idregs[] = {
0x04, 0x00, 0x00, 0x00,
0x60, 0xb8, 0x1b, 0x00,
0x0d, 0xf0, 0x05, 0xb1,
};
static void tz_mpc_irq_update(TZMPC *s)
{
qemu_set_irq(s->irq, s->int_stat && s->int_en);
}
static void tz_mpc_iommu_notify(TZMPC *s, uint32_t lutidx,
uint32_t oldlut, uint32_t newlut)
{
/* Called when the LUT word at lutidx has changed from oldlut to newlut;
* must call the IOMMU notifiers for the changed blocks.
*/
IOMMUTLBEvent event = {
.entry = {
.addr_mask = s->blocksize - 1,
}
};
hwaddr addr = lutidx * s->blocksize * 32;
int i;
for (i = 0; i < 32; i++, addr += s->blocksize) {
bool block_is_ns;
if (!((oldlut ^ newlut) & (1 << i))) {
continue;
}
/* This changes the mappings for both the S and the NS space,
* so we need to do four notifies: an UNMAP then a MAP for each.
*/
block_is_ns = newlut & (1 << i);
trace_tz_mpc_iommu_notify(addr);
event.entry.iova = addr;
event.entry.translated_addr = addr;
event.type = IOMMU_NOTIFIER_UNMAP;
event.entry.perm = IOMMU_NONE;
memory_region_notify_iommu(&s->upstream, IOMMU_IDX_S, event);
memory_region_notify_iommu(&s->upstream, IOMMU_IDX_NS, event);
event.type = IOMMU_NOTIFIER_MAP;
event.entry.perm = IOMMU_RW;
if (block_is_ns) {
event.entry.target_as = &s->blocked_io_as;
} else {
event.entry.target_as = &s->downstream_as;
}
memory_region_notify_iommu(&s->upstream, IOMMU_IDX_S, event);
if (block_is_ns) {
event.entry.target_as = &s->downstream_as;
} else {
event.entry.target_as = &s->blocked_io_as;
}
memory_region_notify_iommu(&s->upstream, IOMMU_IDX_NS, event);
}
}
static void tz_mpc_autoinc_idx(TZMPC *s, unsigned access_size)
{
/* Auto-increment BLK_IDX if necessary */
if (access_size == 4 && (s->ctrl & R_CTRL_AUTOINC_MASK)) {
s->blk_idx++;
s->blk_idx %= s->blk_max;
}
}
static MemTxResult tz_mpc_reg_read(void *opaque, hwaddr addr,
uint64_t *pdata,
unsigned size, MemTxAttrs attrs)
{
TZMPC *s = TZ_MPC(opaque);
uint64_t r;
uint32_t offset = addr & ~0x3;
if (!attrs.secure && offset < A_PIDR4) {
/* NS accesses can only see the ID registers */
qemu_log_mask(LOG_GUEST_ERROR,
"TZ MPC register read: NS access to offset 0x%x\n",
offset);
r = 0;
goto read_out;
}
switch (offset) {
case A_CTRL:
r = s->ctrl;
break;
case A_BLK_MAX:
r = s->blk_max - 1;
break;
case A_BLK_CFG:
/* We are never in "init in progress state", so this just indicates
* the block size. s->blocksize == (1 << BLK_CFG + 5), so
* BLK_CFG == ctz32(s->blocksize) - 5
*/
r = ctz32(s->blocksize) - 5;
break;
case A_BLK_IDX:
r = s->blk_idx;
break;
case A_BLK_LUT:
r = s->blk_lut[s->blk_idx];
tz_mpc_autoinc_idx(s, size);
break;
case A_INT_STAT:
r = s->int_stat;
break;
case A_INT_EN:
r = s->int_en;
break;
case A_INT_INFO1:
r = s->int_info1;
break;
case A_INT_INFO2:
r = s->int_info2;
break;
case A_PIDR4:
case A_PIDR5:
case A_PIDR6:
case A_PIDR7:
case A_PIDR0:
case A_PIDR1:
case A_PIDR2:
case A_PIDR3:
case A_CIDR0:
case A_CIDR1:
case A_CIDR2:
case A_CIDR3:
r = tz_mpc_idregs[(offset - A_PIDR4) / 4];
break;
case A_INT_CLEAR:
case A_INT_SET:
qemu_log_mask(LOG_GUEST_ERROR,
"TZ MPC register read: write-only offset 0x%x\n",
offset);
r = 0;
break;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"TZ MPC register read: bad offset 0x%x\n", offset);
r = 0;
break;
}
if (size != 4) {
/* None of our registers are read-sensitive (except BLK_LUT,
* which can special case the "size not 4" case), so just
* pull the right bytes out of the word read result.
*/
r = extract32(r, (addr & 3) * 8, size * 8);
}
read_out:
trace_tz_mpc_reg_read(addr, r, size);
*pdata = r;
return MEMTX_OK;
}
static MemTxResult tz_mpc_reg_write(void *opaque, hwaddr addr,
uint64_t value,
unsigned size, MemTxAttrs attrs)
{
TZMPC *s = TZ_MPC(opaque);
uint32_t offset = addr & ~0x3;
trace_tz_mpc_reg_write(addr, value, size);
if (!attrs.secure && offset < A_PIDR4) {
/* NS accesses can only see the ID registers */
qemu_log_mask(LOG_GUEST_ERROR,
"TZ MPC register write: NS access to offset 0x%x\n",
offset);
return MEMTX_OK;
}
if (size != 4) {
/* Expand the byte or halfword write to a full word size.
* In most cases we can do this with zeroes; the exceptions
* are CTRL, BLK_IDX and BLK_LUT.
*/
uint32_t oldval;
switch (offset) {
case A_CTRL:
oldval = s->ctrl;
break;
case A_BLK_IDX:
oldval = s->blk_idx;
break;
case A_BLK_LUT:
oldval = s->blk_lut[s->blk_idx];
break;
default:
oldval = 0;
break;
}
value = deposit32(oldval, (addr & 3) * 8, size * 8, value);
}
if ((s->ctrl & R_CTRL_LOCKDOWN_MASK) &&
(offset == A_CTRL || offset == A_BLK_LUT || offset == A_INT_EN)) {
/* Lockdown mode makes these three registers read-only, and
* the only way out of it is to reset the device.
*/
qemu_log_mask(LOG_GUEST_ERROR, "TZ MPC register write to offset 0x%x "
"while MPC is in lockdown mode\n", offset);
return MEMTX_OK;
}
switch (offset) {
case A_CTRL:
/* We don't implement the 'data gating' feature so all other bits
* are reserved and we make them RAZ/WI.
*/
s->ctrl = value & (R_CTRL_SEC_RESP_MASK |
R_CTRL_AUTOINC_MASK |
R_CTRL_LOCKDOWN_MASK);
break;
case A_BLK_IDX:
s->blk_idx = value % s->blk_max;
break;
case A_BLK_LUT:
tz_mpc_iommu_notify(s, s->blk_idx, s->blk_lut[s->blk_idx], value);
s->blk_lut[s->blk_idx] = value;
tz_mpc_autoinc_idx(s, size);
break;
case A_INT_CLEAR:
if (value & R_INT_CLEAR_IRQ_MASK) {
s->int_stat = 0;
tz_mpc_irq_update(s);
}
break;
case A_INT_EN:
s->int_en = value & R_INT_EN_IRQ_MASK;
tz_mpc_irq_update(s);
break;
case A_INT_SET:
if (value & R_INT_SET_IRQ_MASK) {
s->int_stat = R_INT_STAT_IRQ_MASK;
tz_mpc_irq_update(s);
}
break;
case A_PIDR4:
case A_PIDR5:
case A_PIDR6:
case A_PIDR7:
case A_PIDR0:
case A_PIDR1:
case A_PIDR2:
case A_PIDR3:
case A_CIDR0:
case A_CIDR1:
case A_CIDR2:
case A_CIDR3:
qemu_log_mask(LOG_GUEST_ERROR,
"TZ MPC register write: read-only offset 0x%x\n", offset);
break;
default:
qemu_log_mask(LOG_GUEST_ERROR,
"TZ MPC register write: bad offset 0x%x\n", offset);
break;
}
return MEMTX_OK;
}
static const MemoryRegionOps tz_mpc_reg_ops = {
.read_with_attrs = tz_mpc_reg_read,
.write_with_attrs = tz_mpc_reg_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.valid.min_access_size = 1,
.valid.max_access_size = 4,
.impl.min_access_size = 1,
.impl.max_access_size = 4,
};
static inline bool tz_mpc_cfg_ns(TZMPC *s, hwaddr addr)
{
/* Return the cfg_ns bit from the LUT for the specified address */
hwaddr blknum = addr / s->blocksize;
hwaddr blkword = blknum / 32;
uint32_t blkbit = 1U << (blknum % 32);
/* This would imply the address was larger than the size we
* defined this memory region to be, so it can't happen.
*/
assert(blkword < s->blk_max);
return s->blk_lut[blkword] & blkbit;
}
static MemTxResult tz_mpc_handle_block(TZMPC *s, hwaddr addr, MemTxAttrs attrs)
{
/* Handle a blocked transaction: raise IRQ, capture info, etc */
if (!s->int_stat) {
/* First blocked transfer: capture information into INT_INFO1 and
* INT_INFO2. Subsequent transfers are still blocked but don't
* capture information until the guest clears the interrupt.
*/
s->int_info1 = addr;
s->int_info2 = 0;
s->int_info2 = FIELD_DP32(s->int_info2, INT_INFO2, HMASTER,
attrs.requester_id & 0xffff);
s->int_info2 = FIELD_DP32(s->int_info2, INT_INFO2, HNONSEC,
~attrs.secure);
s->int_info2 = FIELD_DP32(s->int_info2, INT_INFO2, CFG_NS,
tz_mpc_cfg_ns(s, addr));
s->int_stat |= R_INT_STAT_IRQ_MASK;
tz_mpc_irq_update(s);
}
/* Generate bus error if desired; otherwise RAZ/WI */
return (s->ctrl & R_CTRL_SEC_RESP_MASK) ? MEMTX_ERROR : MEMTX_OK;
}
/* Accesses only reach these read and write functions if the MPC is
* blocking them; non-blocked accesses go directly to the downstream
* memory region without passing through this code.
*/
static MemTxResult tz_mpc_mem_blocked_read(void *opaque, hwaddr addr,
uint64_t *pdata,
unsigned size, MemTxAttrs attrs)
{
TZMPC *s = TZ_MPC(opaque);
trace_tz_mpc_mem_blocked_read(addr, size, attrs.secure);
*pdata = 0;
return tz_mpc_handle_block(s, addr, attrs);
}
static MemTxResult tz_mpc_mem_blocked_write(void *opaque, hwaddr addr,
uint64_t value,
unsigned size, MemTxAttrs attrs)
{
TZMPC *s = TZ_MPC(opaque);
trace_tz_mpc_mem_blocked_write(addr, value, size, attrs.secure);
return tz_mpc_handle_block(s, addr, attrs);
}
static const MemoryRegionOps tz_mpc_mem_blocked_ops = {
.read_with_attrs = tz_mpc_mem_blocked_read,
.write_with_attrs = tz_mpc_mem_blocked_write,
.endianness = DEVICE_LITTLE_ENDIAN,
.valid.min_access_size = 1,
.valid.max_access_size = 8,
.impl.min_access_size = 1,
.impl.max_access_size = 8,
};
static IOMMUTLBEntry tz_mpc_translate(IOMMUMemoryRegion *iommu,
hwaddr addr, IOMMUAccessFlags flags,
int iommu_idx)
{
TZMPC *s = TZ_MPC(container_of(iommu, TZMPC, upstream));
bool ok;
IOMMUTLBEntry ret = {
.iova = addr & ~(s->blocksize - 1),
.translated_addr = addr & ~(s->blocksize - 1),
.addr_mask = s->blocksize - 1,
.perm = IOMMU_RW,
};
/* Look at the per-block configuration for this address, and
* return a TLB entry directing the transaction at either
* downstream_as or blocked_io_as, as appropriate.
* If the LUT cfg_ns bit is 1, only non-secure transactions
* may pass. If the bit is 0, only secure transactions may pass.
*/
ok = tz_mpc_cfg_ns(s, addr) == (iommu_idx == IOMMU_IDX_NS);
trace_tz_mpc_translate(addr, flags,
iommu_idx == IOMMU_IDX_S ? "S" : "NS",
ok ? "pass" : "block");
ret.target_as = ok ? &s->downstream_as : &s->blocked_io_as;
return ret;
}
static int tz_mpc_attrs_to_index(IOMMUMemoryRegion *iommu, MemTxAttrs attrs)
{
/* We treat unspecified attributes like secure. Transactions with
* unspecified attributes come from places like
* rom_reset() for initial image load, and we want
* those to pass through the from-reset "everything is secure" config.
* All the real during-emulation transactions from the CPU will
* specify attributes.
*/
return (attrs.unspecified || attrs.secure) ? IOMMU_IDX_S : IOMMU_IDX_NS;
}
static int tz_mpc_num_indexes(IOMMUMemoryRegion *iommu)
{
return IOMMU_NUM_INDEXES;
}
static void tz_mpc_reset(DeviceState *dev)
{
TZMPC *s = TZ_MPC(dev);
s->ctrl = 0x00000100;
s->blk_idx = 0;
s->int_stat = 0;
s->int_en = 1;
s->int_info1 = 0;
s->int_info2 = 0;
memset(s->blk_lut, 0, s->blk_max * sizeof(uint32_t));
}
static void tz_mpc_init(Object *obj)
{
DeviceState *dev = DEVICE(obj);
TZMPC *s = TZ_MPC(obj);
qdev_init_gpio_out_named(dev, &s->irq, "irq", 1);
}
static void tz_mpc_realize(DeviceState *dev, Error **errp)
{
Object *obj = OBJECT(dev);
SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
TZMPC *s = TZ_MPC(dev);
uint64_t size;
/* We can't create the upstream end of the port until realize,
* as we don't know the size of the MR used as the downstream until then.
* We insist on having a downstream, to avoid complicating the code
* with handling the "don't know how big this is" case. It's easy
* enough for the user to create an unimplemented_device as downstream
* if they have nothing else to plug into this.
*/
if (!s->downstream) {
error_setg(errp, "MPC 'downstream' link not set");
return;
}
size = memory_region_size(s->downstream);
memory_region_init_iommu(&s->upstream, sizeof(s->upstream),
TYPE_TZ_MPC_IOMMU_MEMORY_REGION,
obj, "tz-mpc-upstream", size);
/* In real hardware the block size is configurable. In QEMU we could
* make it configurable but will need it to be at least as big as the
* target page size so we can execute out of the resulting MRs. Guest
* software is supposed to check the block size using the BLK_CFG
* register, so make it fixed at the page size.
*/
s->blocksize = memory_region_iommu_get_min_page_size(&s->upstream);
if (size % s->blocksize != 0) {
error_setg(errp,
"MPC 'downstream' size %" PRId64
" is not a multiple of %" HWADDR_PRIx " bytes",
size, s->blocksize);
object_unref(OBJECT(&s->upstream));
return;
}
/* BLK_MAX is the max value of BLK_IDX, which indexes an array of 32-bit
* words, each bit of which indicates one block.
*/
s->blk_max = DIV_ROUND_UP(size / s->blocksize, 32);
memory_region_init_io(&s->regmr, obj, &tz_mpc_reg_ops,
s, "tz-mpc-regs", 0x1000);
sysbus_init_mmio(sbd, &s->regmr);
sysbus_init_mmio(sbd, MEMORY_REGION(&s->upstream));
/* This memory region is not exposed to users of this device as a
* sysbus MMIO region, but is instead used internally as something
* that our IOMMU translate function might direct accesses to.
*/
memory_region_init_io(&s->blocked_io, obj, &tz_mpc_mem_blocked_ops,
s, "tz-mpc-blocked-io", size);
address_space_init(&s->downstream_as, s->downstream,
"tz-mpc-downstream");
address_space_init(&s->blocked_io_as, &s->blocked_io,
"tz-mpc-blocked-io");
s->blk_lut = g_new0(uint32_t, s->blk_max);
}
static int tz_mpc_post_load(void *opaque, int version_id)
{
TZMPC *s = TZ_MPC(opaque);
/* Check the incoming data doesn't point blk_idx off the end of blk_lut. */
if (s->blk_idx >= s->blk_max) {
return -1;
}
return 0;
}
static const VMStateDescription tz_mpc_vmstate = {
.name = "tz-mpc",
.version_id = 1,
.minimum_version_id = 1,
.post_load = tz_mpc_post_load,
.fields = (const VMStateField[]) {
VMSTATE_UINT32(ctrl, TZMPC),
VMSTATE_UINT32(blk_idx, TZMPC),
VMSTATE_UINT32(int_stat, TZMPC),
VMSTATE_UINT32(int_en, TZMPC),
VMSTATE_UINT32(int_info1, TZMPC),
VMSTATE_UINT32(int_info2, TZMPC),
VMSTATE_VARRAY_UINT32(blk_lut, TZMPC, blk_max,
0, vmstate_info_uint32, uint32_t),
VMSTATE_END_OF_LIST()
}
};
static const Property tz_mpc_properties[] = {
DEFINE_PROP_LINK("downstream", TZMPC, downstream,
TYPE_MEMORY_REGION, MemoryRegion *),
};
static void tz_mpc_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
dc->realize = tz_mpc_realize;
dc->vmsd = &tz_mpc_vmstate;
device_class_set_legacy_reset(dc, tz_mpc_reset);
device_class_set_props(dc, tz_mpc_properties);
}
static const TypeInfo tz_mpc_info = {
.name = TYPE_TZ_MPC,
.parent = TYPE_SYS_BUS_DEVICE,
.instance_size = sizeof(TZMPC),
.instance_init = tz_mpc_init,
.class_init = tz_mpc_class_init,
};
static void tz_mpc_iommu_memory_region_class_init(ObjectClass *klass,
void *data)
{
IOMMUMemoryRegionClass *imrc = IOMMU_MEMORY_REGION_CLASS(klass);
imrc->translate = tz_mpc_translate;
imrc->attrs_to_index = tz_mpc_attrs_to_index;
imrc->num_indexes = tz_mpc_num_indexes;
}
static const TypeInfo tz_mpc_iommu_memory_region_info = {
.name = TYPE_TZ_MPC_IOMMU_MEMORY_REGION,
.parent = TYPE_IOMMU_MEMORY_REGION,
.class_init = tz_mpc_iommu_memory_region_class_init,
};
static void tz_mpc_register_types(void)
{
type_register_static(&tz_mpc_info);
type_register_static(&tz_mpc_iommu_memory_region_info);
}
type_init(tz_mpc_register_types);
|