1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386
|
/*
* PXA270-based Zipit Z2 device
*
* Copyright (c) 2011 by Vasily Khoruzhick <anarsoul@gmail.com>
*
* Code is based on mainstone platform.
*
* This code is licensed under the GNU GPL v2.
*
* Contributions after 2012-01-13 are licensed under the terms of the
* GNU GPL, version 2 or (at your option) any later version.
*/
#include "hw/hw.h"
#include "hw/arm/pxa.h"
#include "hw/arm/arm.h"
#include "hw/devices.h"
#include "hw/i2c/i2c.h"
#include "hw/ssi.h"
#include "hw/boards.h"
#include "sysemu/sysemu.h"
#include "hw/block/flash.h"
#include "sysemu/blockdev.h"
#include "ui/console.h"
#include "audio/audio.h"
#include "exec/address-spaces.h"
#include "sysemu/qtest.h"
#ifdef DEBUG_Z2
#define DPRINTF(fmt, ...) \
printf(fmt, ## __VA_ARGS__)
#else
#define DPRINTF(fmt, ...)
#endif
static const struct keymap map[0x100] = {
[0 ... 0xff] = { -1, -1 },
[0x3b] = {0, 0}, /* Option = F1 */
[0xc8] = {0, 1}, /* Up */
[0xd0] = {0, 2}, /* Down */
[0xcb] = {0, 3}, /* Left */
[0xcd] = {0, 4}, /* Right */
[0xcf] = {0, 5}, /* End */
[0x0d] = {0, 6}, /* KPPLUS */
[0xc7] = {1, 0}, /* Home */
[0x10] = {1, 1}, /* Q */
[0x17] = {1, 2}, /* I */
[0x22] = {1, 3}, /* G */
[0x2d] = {1, 4}, /* X */
[0x1c] = {1, 5}, /* Enter */
[0x0c] = {1, 6}, /* KPMINUS */
[0xc9] = {2, 0}, /* PageUp */
[0x11] = {2, 1}, /* W */
[0x18] = {2, 2}, /* O */
[0x23] = {2, 3}, /* H */
[0x2e] = {2, 4}, /* C */
[0x38] = {2, 5}, /* LeftAlt */
[0xd1] = {3, 0}, /* PageDown */
[0x12] = {3, 1}, /* E */
[0x19] = {3, 2}, /* P */
[0x24] = {3, 3}, /* J */
[0x2f] = {3, 4}, /* V */
[0x2a] = {3, 5}, /* LeftShift */
[0x01] = {4, 0}, /* Esc */
[0x13] = {4, 1}, /* R */
[0x1e] = {4, 2}, /* A */
[0x25] = {4, 3}, /* K */
[0x30] = {4, 4}, /* B */
[0x1d] = {4, 5}, /* LeftCtrl */
[0x0f] = {5, 0}, /* Tab */
[0x14] = {5, 1}, /* T */
[0x1f] = {5, 2}, /* S */
[0x26] = {5, 3}, /* L */
[0x31] = {5, 4}, /* N */
[0x39] = {5, 5}, /* Space */
[0x3c] = {6, 0}, /* Stop = F2 */
[0x15] = {6, 1}, /* Y */
[0x20] = {6, 2}, /* D */
[0x0e] = {6, 3}, /* Backspace */
[0x32] = {6, 4}, /* M */
[0x33] = {6, 5}, /* Comma */
[0x3d] = {7, 0}, /* Play = F3 */
[0x16] = {7, 1}, /* U */
[0x21] = {7, 2}, /* F */
[0x2c] = {7, 3}, /* Z */
[0x27] = {7, 4}, /* Semicolon */
[0x34] = {7, 5}, /* Dot */
};
#define Z2_RAM_SIZE 0x02000000
#define Z2_FLASH_BASE 0x00000000
#define Z2_FLASH_SIZE 0x00800000
static struct arm_boot_info z2_binfo = {
.loader_start = PXA2XX_SDRAM_BASE,
.ram_size = Z2_RAM_SIZE,
};
#define Z2_GPIO_SD_DETECT 96
#define Z2_GPIO_AC_IN 0
#define Z2_GPIO_KEY_ON 1
#define Z2_GPIO_LCD_CS 88
typedef struct {
SSISlave ssidev;
int32_t selected;
int32_t enabled;
uint8_t buf[3];
uint32_t cur_reg;
int pos;
} ZipitLCD;
static uint32_t zipit_lcd_transfer(SSISlave *dev, uint32_t value)
{
ZipitLCD *z = FROM_SSI_SLAVE(ZipitLCD, dev);
uint16_t val;
if (z->selected) {
z->buf[z->pos] = value & 0xff;
z->pos++;
}
if (z->pos == 3) {
switch (z->buf[0]) {
case 0x74:
DPRINTF("%s: reg: 0x%.2x\n", __func__, z->buf[2]);
z->cur_reg = z->buf[2];
break;
case 0x76:
val = z->buf[1] << 8 | z->buf[2];
DPRINTF("%s: value: 0x%.4x\n", __func__, val);
if (z->cur_reg == 0x22 && val == 0x0000) {
z->enabled = 1;
printf("%s: LCD enabled\n", __func__);
} else if (z->cur_reg == 0x10 && val == 0x0000) {
z->enabled = 0;
printf("%s: LCD disabled\n", __func__);
}
break;
default:
DPRINTF("%s: unknown command!\n", __func__);
break;
}
z->pos = 0;
}
return 0;
}
static void z2_lcd_cs(void *opaque, int line, int level)
{
ZipitLCD *z2_lcd = opaque;
z2_lcd->selected = !level;
}
static int zipit_lcd_init(SSISlave *dev)
{
ZipitLCD *z = FROM_SSI_SLAVE(ZipitLCD, dev);
z->selected = 0;
z->enabled = 0;
z->pos = 0;
return 0;
}
static VMStateDescription vmstate_zipit_lcd_state = {
.name = "zipit-lcd",
.version_id = 2,
.minimum_version_id = 2,
.fields = (VMStateField[]) {
VMSTATE_SSI_SLAVE(ssidev, ZipitLCD),
VMSTATE_INT32(selected, ZipitLCD),
VMSTATE_INT32(enabled, ZipitLCD),
VMSTATE_BUFFER(buf, ZipitLCD),
VMSTATE_UINT32(cur_reg, ZipitLCD),
VMSTATE_INT32(pos, ZipitLCD),
VMSTATE_END_OF_LIST(),
}
};
static void zipit_lcd_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
k->init = zipit_lcd_init;
k->transfer = zipit_lcd_transfer;
dc->vmsd = &vmstate_zipit_lcd_state;
}
static const TypeInfo zipit_lcd_info = {
.name = "zipit-lcd",
.parent = TYPE_SSI_SLAVE,
.instance_size = sizeof(ZipitLCD),
.class_init = zipit_lcd_class_init,
};
#define TYPE_AER915 "aer915"
#define AER915(obj) OBJECT_CHECK(AER915State, (obj), TYPE_AER915)
typedef struct AER915State {
I2CSlave parent_obj;
int len;
uint8_t buf[3];
} AER915State;
static int aer915_send(I2CSlave *i2c, uint8_t data)
{
AER915State *s = AER915(i2c);
s->buf[s->len] = data;
if (s->len++ > 2) {
DPRINTF("%s: message too long (%i bytes)\n",
__func__, s->len);
return 1;
}
if (s->len == 2) {
DPRINTF("%s: reg %d value 0x%02x\n", __func__,
s->buf[0], s->buf[1]);
}
return 0;
}
static void aer915_event(I2CSlave *i2c, enum i2c_event event)
{
AER915State *s = AER915(i2c);
switch (event) {
case I2C_START_SEND:
s->len = 0;
break;
case I2C_START_RECV:
if (s->len != 1) {
DPRINTF("%s: short message!?\n", __func__);
}
break;
case I2C_FINISH:
break;
default:
break;
}
}
static int aer915_recv(I2CSlave *slave)
{
AER915State *s = AER915(slave);
int retval = 0x00;
switch (s->buf[0]) {
/* Return hardcoded battery voltage,
* 0xf0 means ~4.1V
*/
case 0x02:
retval = 0xf0;
break;
/* Return 0x00 for other regs,
* we don't know what they are for,
* anyway they return 0x00 on real hardware.
*/
default:
break;
}
return retval;
}
static int aer915_init(I2CSlave *i2c)
{
/* Nothing to do. */
return 0;
}
static VMStateDescription vmstate_aer915_state = {
.name = "aer915",
.version_id = 1,
.minimum_version_id = 1,
.fields = (VMStateField[]) {
VMSTATE_INT32(len, AER915State),
VMSTATE_BUFFER(buf, AER915State),
VMSTATE_END_OF_LIST(),
}
};
static void aer915_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
k->init = aer915_init;
k->event = aer915_event;
k->recv = aer915_recv;
k->send = aer915_send;
dc->vmsd = &vmstate_aer915_state;
}
static const TypeInfo aer915_info = {
.name = TYPE_AER915,
.parent = TYPE_I2C_SLAVE,
.instance_size = sizeof(AER915State),
.class_init = aer915_class_init,
};
static void z2_init(MachineState *machine)
{
const char *cpu_model = machine->cpu_model;
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
MemoryRegion *address_space_mem = get_system_memory();
uint32_t sector_len = 0x10000;
PXA2xxState *mpu;
DriveInfo *dinfo;
int be;
void *z2_lcd;
I2CBus *bus;
DeviceState *wm;
if (!cpu_model) {
cpu_model = "pxa270-c5";
}
/* Setup CPU & memory */
mpu = pxa270_init(address_space_mem, z2_binfo.ram_size, cpu_model);
#ifdef TARGET_WORDS_BIGENDIAN
be = 1;
#else
be = 0;
#endif
dinfo = drive_get(IF_PFLASH, 0, 0);
if (!dinfo && !qtest_enabled()) {
fprintf(stderr, "Flash image must be given with the "
"'pflash' parameter\n");
exit(1);
}
if (!pflash_cfi01_register(Z2_FLASH_BASE,
NULL, "z2.flash0", Z2_FLASH_SIZE,
dinfo ? dinfo->bdrv : NULL, sector_len,
Z2_FLASH_SIZE / sector_len, 4, 0, 0, 0, 0,
be)) {
fprintf(stderr, "qemu: Error registering flash memory.\n");
exit(1);
}
/* setup keypad */
pxa27x_register_keypad(mpu->kp, map, 0x100);
/* MMC/SD host */
pxa2xx_mmci_handlers(mpu->mmc,
NULL,
qdev_get_gpio_in(mpu->gpio, Z2_GPIO_SD_DETECT));
type_register_static(&zipit_lcd_info);
type_register_static(&aer915_info);
z2_lcd = ssi_create_slave(mpu->ssp[1], "zipit-lcd");
bus = pxa2xx_i2c_bus(mpu->i2c[0]);
i2c_create_slave(bus, TYPE_AER915, 0x55);
wm = i2c_create_slave(bus, "wm8750", 0x1b);
mpu->i2s->opaque = wm;
mpu->i2s->codec_out = wm8750_dac_dat;
mpu->i2s->codec_in = wm8750_adc_dat;
wm8750_data_req_set(wm, mpu->i2s->data_req, mpu->i2s);
qdev_connect_gpio_out(mpu->gpio, Z2_GPIO_LCD_CS,
qemu_allocate_irq(z2_lcd_cs, z2_lcd, 0));
z2_binfo.kernel_filename = kernel_filename;
z2_binfo.kernel_cmdline = kernel_cmdline;
z2_binfo.initrd_filename = initrd_filename;
z2_binfo.board_id = 0x6dd;
arm_load_kernel(mpu->cpu, &z2_binfo);
}
static QEMUMachine z2_machine = {
.name = "z2",
.desc = "Zipit Z2 (PXA27x)",
.init = z2_init,
};
static void z2_machine_init(void)
{
qemu_register_machine(&z2_machine);
}
machine_init(z2_machine_init);
|