1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
|
r.gwflow
Numerical calculation program for transient, confined and unconfined groundwater flow in two dimensions.
Raster (r.*)
ParameterString|phead|The initial piezometric head in [m]|
ParameterString|status|Boundary condition status, 0-inactive, 1-active, 2-dirichlet|
ParameterString|hc_x|X-part of the hydraulic conductivity tensor in [m/s]|
ParameterString|hc_y|Y-part of the hydraulic conductivity tensor in [m/s]|
ParameterString|q|Water sources and sinks in [m^3/s]|
ParameterString|s|Specific yield in [1/m]|
ParameterString|r|Recharge map e.g: 6*10^-9 per cell in [m^3/s*m^2]|
ParameterString|top|Top surface of the aquifer in [m]|
ParameterString|bottom|Bottom surface of the aquifer in [m]|
ParameterSelection|type|The type of groundwater flow|confined;unconfined
ParameterString|river_bed|The height of the river bed in [m]|
ParameterString|river_head|Water level (head) of the river with leakage connection in [m]|
ParameterString|river_leak|The leakage coefficient of the river bed in [1/s]|
ParameterString|drain_bed|The height of the drainage bed in [m]|
ParameterString|drain_leak|The leakage coefficient of the drainage bed in [1/s]|
ParameterNumber|dt|The calculation time in seconds|None|None|86400.0
ParameterNumber|maxit|Maximum number of iteration used to solver the linear equation system|None|None|100000.0
ParameterNumber|error|Error break criteria for iterative solvers (jacobi, sor, cg or bicgstab)|None|None|1e-10
ParameterSelection|solver|The type of solver which should solve the symmetric linear equation system|gauss;lu;cholesky;jacobi;sor;cg;bicgstab;pcg
ParameterString|relax|The relaxation parameter used by the jacobi and sor solver for speedup or stabilizing|1
ParameterBoolean|-s|Use a sparse matrix, only available with iterative solvers|False
OutputRaster|output|Groundwater flow
|
