/************************************************************************
 * This file has been generated automatically from                      *
 *                                                                      *
 * src/gui/qgsadvanceddigitizingdockwidget.h                            *
 *                                                                      *
 * Do not edit manually ! Edit header and run scripts/sipify.pl again   *
 ************************************************************************/







class QgsAdvancedDigitizingDockWidget : QgsDockWidget
{
%Docstring(signature="appended")
The :py:class:`QgsAdvancedDigitizingDockWidget` class is a dockable widget
used to handle the CAD tools on top of a selection of map tools.
It handles both the UI and the constraints. Constraints are applied
by implementing filters called from :py:class:`QgsMapToolAdvancedDigitizing`.
%End

%TypeHeaderCode
#include "qgsadvanceddigitizingdockwidget.h"
%End
  public:

    enum CadCapacity
    {
      AbsoluteAngle,
      RelativeAngle,
      RelativeCoordinates,
      Distance,
    };
    typedef QFlags<QgsAdvancedDigitizingDockWidget::CadCapacity> CadCapacities;


    enum class AdditionalConstraint
    {
      NoConstraint,
      Perpendicular,
      Parallel
    };

    enum WidgetSetMode
    {
      ReturnPressed,
    };


    class CadConstraint
{
%Docstring(signature="appended")
The CadConstraint is an abstract class for all basic constraints (angle/distance/x/y).
It contains all values (locked, value, relative) and pointers to corresponding widgets.

.. note::

   Relative is not mandatory since it is not used for distance.
%End

%TypeHeaderCode
#include "qgsadvanceddigitizingdockwidget.h"
%End
      public:

        enum LockMode
        {
          NoLock,
          SoftLock,
          HardLock
        };

        CadConstraint( QLineEdit *lineEdit, QToolButton *lockerButton, QToolButton *relativeButton = 0, QToolButton *repeatingLockButton = 0 );
%Docstring
Constructor for CadConstraint.

:param lineEdit: associated line edit for constraint value
:param lockerButton: associated button for locking constraint
:param relativeButton: optional button for toggling relative constraint mode
:param repeatingLockButton: optional button for toggling repeating lock mode
%End

        LockMode lockMode() const;
%Docstring
The current lock mode of this constraint

:return: Lock mode
%End

        bool isLocked() const;
%Docstring
Is any kind of lock mode enabled
%End

        bool isRepeatingLock() const;
%Docstring
Returns ``True`` if a repeating lock is set for the constraint. Repeating locks are not
automatically cleared after a new point is added.

.. seealso:: :py:func:`setRepeatingLock`

.. versionadded:: 2.16
%End

        bool relative() const;
%Docstring
Is the constraint in relative mode
%End

        double value() const;
%Docstring
The value of the constraint
%End

        QLineEdit *lineEdit() const;
%Docstring
The line edit that manages the value of the constraint
%End

        void setLockMode( LockMode mode );
%Docstring
Set the lock mode
%End

        void setRepeatingLock( bool repeating );
%Docstring
Sets whether a repeating lock is set for the constraint. Repeating locks are not
automatically cleared after a new point is added.

:param repeating: set to ``True`` to set the lock to repeat automatically

.. seealso:: :py:func:`isRepeatingLock`

.. versionadded:: 2.16
%End

        void setRelative( bool relative );
%Docstring
Set if the constraint should be treated relative
%End

        void setValue( double value, bool updateWidget = true );
%Docstring
Set the value of the constraint

:param value: new value for constraint
:param updateWidget: set to ``False`` to prevent automatically updating the associated widget's value
%End

        void toggleLocked();
%Docstring
Toggle lock mode
%End

        void toggleRelative();
%Docstring
Toggle relative mode
%End

        int precision() const;
%Docstring
Returns the numeric precision (decimal places) to show in the associated widget.

.. seealso:: :py:func:`setPrecision`

.. versionadded:: 3.22
%End

        void setPrecision( int precision );
%Docstring
Sets the numeric precision (decimal places) to show in the associated widget.

.. seealso:: :py:func:`precision`

.. versionadded:: 3.22
%End

    };

    explicit QgsAdvancedDigitizingDockWidget( QgsMapCanvas *canvas, QWidget *parent = 0 );
%Docstring
Create an advanced digitizing dock widget

:param canvas: The map canvas on which the widget operates
:param parent: The parent
%End

    bool canvasKeyPressEventFilter( QKeyEvent *e );
%Docstring
Filter key events to e.g. toggle construction mode or adapt constraints

:param e: A mouse event (may be modified)

:return: If the event is hidden (construction mode hides events from the maptool)
%End

    bool applyConstraints( QgsMapMouseEvent *e );
%Docstring
apply the CAD constraints. The will modify the position of the map event in map coordinates by applying the CAD constraints.

:return: ``False`` if no solution was found (invalid constraints)
%End

    bool alignToSegment( QgsMapMouseEvent *e, QgsAdvancedDigitizingDockWidget::CadConstraint::LockMode lockMode = QgsAdvancedDigitizingDockWidget::CadConstraint::HardLock );
%Docstring
align to segment for additional constraint.
If additional constraints are used, this will determine the angle to be locked depending on the snapped segment.

.. versionadded:: 3.0
%End

    void releaseLocks( bool releaseRepeatingLocks = true );
%Docstring
unlock all constraints

:param releaseRepeatingLocks: set to ``False`` to preserve the lock for any constraints set to repeating lock mode

.. versionadded:: 3.0
%End

    void clear();
%Docstring
Clear any cached previous clicks and helper lines
%End

    virtual void keyPressEvent( QKeyEvent *e );


    bool cadEnabled() const;
%Docstring
determines if CAD tools are enabled or if map tools behaves "nomally"
%End

    void switchZM( );
%Docstring
Determines if Z or M will be enabled.

.. versionadded:: 3.22
%End

    void setEnabledZ( bool enable );
%Docstring
Sets whether Z is enabled

.. versionadded:: 3.22
%End

    void setEnabledM( bool enable );
%Docstring
Sets whether M is enabled

.. versionadded:: 3.22
%End

    bool constructionMode() const;
%Docstring
construction mode is used to draw intermediate points. These points won't be given any further (i.e. to the map tools)
%End

    AdditionalConstraint additionalConstraint() const;
%Docstring
Returns the additional constraints which are used to place
perpendicular/parallel segments to snapped segments on the canvas
%End
    const CadConstraint *constraintAngle() const;
%Docstring
Returns the ``CadConstraint`` on the angle
%End
    const CadConstraint *constraintDistance() const;
%Docstring
Returns the ``CadConstraint`` on the distance
%End
    const CadConstraint *constraintX() const;
%Docstring
Returns the ``CadConstraint`` on the X coordinate
%End
    const CadConstraint *constraintY() const;
%Docstring
Returns the ``CadConstraint`` on the Y coordinate
%End

    const CadConstraint *constraintZ() const;
%Docstring
Returns the ``CadConstraint`` on the Z coordinate

.. versionadded:: 3.22
%End

    const CadConstraint *constraintM() const;
%Docstring
Returns the ``CadConstraint`` on the M coordinate

.. versionadded:: 3.22
%End
    bool commonAngleConstraint() const;
%Docstring
Returns ``True`` if a constraint on a common angle is active
%End

    QgsPointLocator::Match mapPointMatch() const;
%Docstring
Returns the point locator match

.. versionadded:: 3.4
%End

    void clearPoints();
%Docstring
Removes all points from the CAD point list

.. versionadded:: 3.0
%End

    void addPoint( const QgsPointXY &point );
%Docstring
Adds point to the CAD point list

.. versionadded:: 3.0
%End

    void removePreviousPoint();
%Docstring
Remove previous point in the CAD point list

.. versionadded:: 3.8
%End

    void setPoints( const QList<QgsPointXY> &points );
%Docstring
Configures list of current CAD points

Some map tools may find it useful to override list of CAD points that is otherwise
automatically populated when user clicks with left mouse button on map canvas.

.. versionadded:: 3.0
%End

    QgsPoint currentPointV2( bool *exists  = 0 ) const;
%Docstring
The last point.
Helper for the CAD point list. The CAD point list is the list of points
currently digitized. It contains both  "normal" points and intermediate points (construction mode).

.. versionadded:: 3.22
%End

    QgsPoint currentPointLayerCoordinates( QgsMapLayer *layer ) const;
%Docstring
Returns the last CAD point, in a map ``layer``'s coordinates.

.. versionadded:: 3.22
%End

 QgsPointXY currentPoint( bool *exists  = 0 ) const /Deprecated/;
%Docstring
The last point.
Helper for the CAD point list. The CAD point list is the list of points
currently digitized. It contains both  "normal" points and intermediate points (construction mode).

.. deprecated:: QGIS 3.22.
   Use :py:func:`~QgsAdvancedDigitizingDockWidget.currentPointV2` instead.
%End
    QgsPoint previousPointV2( bool *exists = 0 ) const;
%Docstring
The previous point.
Helper for the CAD point list. The CAD point list is the list of points
currently digitized. It contains both  "normal" points and intermediate points (construction mode).
%End

 QgsPointXY previousPoint( bool *exists = 0 ) const /Deprecated/;
%Docstring
The previous point.
Helper for the CAD point list. The CAD point list is the list of points
currently digitized. It contains both  "normal" points and intermediate points (construction mode).

.. deprecated:: QGIS 3.22.
   Use :py:func:`~QgsAdvancedDigitizingDockWidget.previousPointV2` instead.
%End
    QgsPoint penultimatePointV2( bool *exists = 0 ) const;
%Docstring
The penultimate point.
Helper for the CAD point list. The CAD point list is the list of points
currently digitized. It contains both  "normal" points and intermediate points (construction mode).
%End

 QgsPointXY penultimatePoint( bool *exists = 0 ) const /Deprecated/;
%Docstring
The penultimate point.
Helper for the CAD point list. The CAD point list is the list of points
currently digitized. It contains both  "normal" points and intermediate points (construction mode).

.. deprecated:: QGIS 3.22.
   Use :py:func:`~QgsAdvancedDigitizingDockWidget.penultimatePointV2` instead.
%End
    int pointsCount() const;
%Docstring
The number of points in the CAD point helper list
%End

    bool snappedToVertex() const;
%Docstring
Is it snapped to a vertex
%End

    QList<QgsPointXY> snappedSegment() const;
%Docstring
Snapped to a segment
%End

    QAction *enableAction();
%Docstring
Returns the action used to enable/disable the tools
%End

    void enable();
%Docstring
Enables the tool (call this when an appropriate map tool is set and in the condition to make use of
cad digitizing)
Normally done automatically from :py:func:`QgsMapToolAdvancedDigitizing.activate()` but may need to be fine tuned
if the map tool depends on preconditions like a feature selection.
%End

    void disable();
%Docstring
Disable the widget. Normally done automatically from :py:func:`QgsMapToolAdvancedDigitizing.deactivate()`.
%End

    void updateCadPaintItem();
%Docstring
Updates canvas item that displays constraints on the ma

.. versionadded:: 3.0
%End

    void setX( const QString &value, WidgetSetMode mode );
%Docstring
Set the X value on the widget.
Can be used to set constraints by external widgets.

:param mode: What type of interaction to emulate
:param value: The value (as a QString, as it could be an expression)

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void setY( const QString &value, WidgetSetMode mode );
%Docstring
Set the Y value on the widget.
Can be used to set constraints by external widgets.

:param mode: What type of interaction to emulate
:param value: The value (as a QString, as it could be an expression)

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void setZ( const QString &value, WidgetSetMode mode );
%Docstring
Set the Z value on the widget.
Can be used to set constraints by external widgets.

:param mode: What type of interaction to emulate
:param value: The value (as a QString, as it could be an expression)

.. note::

   unstable API (will likely change)

.. versionadded:: 3.22
%End

    void setM( const QString &value, WidgetSetMode mode );
%Docstring
Set the M value on the widget.
Can be used to set constraints by external widgets.

:param mode: What type of interaction to emulate
:param value: The value (as a QString, as it could be an expression)

.. note::

   unstable API (will likely change)

.. versionadded:: 3.22
%End

    void setAngle( const QString &value, WidgetSetMode mode );
%Docstring
Set the angle value on the widget.
Can be used to set constraints by external widgets.

:param mode: What type of interaction to emulate
:param value: The value (as a QString, as it could be an expression)

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void setDistance( const QString &value, WidgetSetMode mode );
%Docstring
Set the distance value on the widget.
Can be used to set constraints by external widgets.

:param mode: What type of interaction to emulate
:param value: The value (as a QString, as it could be an expression)

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    double getLineZ( ) const;
%Docstring
Convenient method to get the Z value from the line edit wiget

.. versionadded:: 3.22
%End

    double getLineM( ) const;
%Docstring
Convenient method to get the M value from the line edit wiget

.. versionadded:: 3.22
%End

  signals:

    void pushWarning( const QString &message );
%Docstring
Push a warning

:param message: An informative message
%End

    void popWarning();
%Docstring
Remove any previously emitted warnings (if any)
%End

    void pointChangedV2( const QgsPoint &point );
%Docstring
Sometimes a constraint may change the current point out of a mouse event. This happens normally
when a constraint is toggled.

:param point: The last known digitizing point. Can be used to emulate a mouse event.

.. versionadded:: 3.22
%End

 void pointChanged( const QgsPointXY &point ) /Deprecated/;
%Docstring
Sometimes a constraint may change the current point out of a mouse event. This happens normally
when a constraint is toggled.

:param point: The last known digitizing point. Can be used to emulate a mouse event.

.. deprecated:: QGIS 3.22.
   No longer used, will be removed in QGIS 4.0. Use pointChangedV2 instead.
%End


    void cadEnabledChanged( bool enabled );
%Docstring
Emitted whenever CAD is enabled or disabled

:param enabled: Whether CAD is enabled or not

.. note::

   unstable API (will likely change).

.. versionadded:: 3.8
%End

    void valueXChanged( const QString &value );
%Docstring
Emitted whenever the X ``value`` changes (either the mouse moved, or the user changed the input).
Could be used by widgets that must reflect the current advanced digitizing state.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void valueYChanged( const QString &value );
%Docstring
Emitted whenever the Y ``value`` changes (either the mouse moved, or the user changed the input).
Could be used by widgets that must reflect the current advanced digitizing state.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void valueZChanged( const QString &value );
%Docstring
Emitted whenever the Z ``value`` changes (either the mouse moved, or the user changed the input).
Could be used by widgets that must reflect the current advanced digitizing state.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.22
%End

    void valueMChanged( const QString &value );
%Docstring
Emitted whenever the M ``value`` changes (either the mouse moved, or the user changed the input).
Could be used by widgets that must reflect the current advanced digitizing state.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.22
%End

    void valueAngleChanged( const QString &value );
%Docstring
Emitted whenever the angle ``value`` changes (either the mouse moved, or the user changed the input).
Could be used by widgets that must reflect the current advanced digitizing state.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void valueDistanceChanged( const QString &value );
%Docstring
Emitted whenever the distance ``value`` changes (either the mouse moved, or the user changed the input).
Could be used by widgets that must reflect the current advanced digitizing state.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void lockXChanged( bool locked );
%Docstring
Emitted whenever the X parameter is ``locked``.
Could be used by widgets that must reflect the current advanced digitizing state.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void lockYChanged( bool locked );
%Docstring
Emitted whenever the Y parameter is ``locked``.
Could be used by widgets that must reflect the current advanced digitizing state.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void lockZChanged( bool locked );
%Docstring
Emitted whenever the Z parameter is ``locked``.
Could be used by widgets that must reflect the current advanced digitizing state.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.22
%End

    void lockMChanged( bool locked );
%Docstring
Emitted whenever the M parameter is ``locked``.
Could be used by widgets that must reflect the current advanced digitizing state.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.22
%End

    void lockAngleChanged( bool locked );
%Docstring
Emitted whenever the angle parameter is ``locked``.
Could be used by widgets that must reflect the current advanced digitizing state.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void lockDistanceChanged( bool locked );
%Docstring
Emitted whenever the distance parameter is ``locked``.
Could be used by widgets that must reflect the current advanced digitizing state.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void relativeXChanged( bool relative );
%Docstring
Emitted whenever the X parameter is toggled between absolute and relative.
Could be used by widgets that must reflect the current advanced digitizing state.

:param relative: Whether the X parameter is relative or not.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void relativeYChanged( bool relative );
%Docstring
Emitted whenever the Y parameter is toggled between absolute and relative.
Could be used by widgets that must reflect the current advanced digitizing state.

:param relative: Whether the Y parameter is relative or not.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void relativeZChanged( bool relative );
%Docstring
Emitted whenever the Z parameter is toggled between absolute and relative.
Could be used by widgets that must reflect the current advanced digitizing state.

:param relative: Whether the Z parameter is relative or not.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.22
%End

    void relativeMChanged( bool relative );
%Docstring
Emitted whenever the M parameter is toggled between absolute and relative.
Could be used by widgets that must reflect the current advanced digitizing state.

:param relative: Whether the M parameter is relative or not.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.22
%End

    void relativeAngleChanged( bool relative );
%Docstring
Emitted whenever the angleX parameter is toggled between absolute and relative.
Could be used by widgets that must reflect the current advanced digitizing state.

:param relative: Whether the angle parameter is relative or not.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End


    void enabledChangedX( bool enabled );
%Docstring
Emitted whenever the X field is enabled or disabled. Depending on the context, some parameters
do not make sense (e.g. you need a previous point to define a distance).
Could be used by widgets that must reflect the current advanced digitizing state.

:param enabled: Whether the X parameter is enabled or not.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void enabledChangedY( bool enabled );
%Docstring
Emitted whenever the Y field is enabled or disabled. Depending on the context, some parameters
do not make sense (e.g. you need a previous point to define a distance).
Could be used by widgets that must reflect the current advanced digitizing state.

:param enabled: Whether the Y parameter is enabled or not.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void enabledChangedZ( bool enabled );
%Docstring
Emitted whenever the Z field is enabled or disabled. Depending on the context, some parameters
do not make sense (e.g. you need a previous point to define a distance).
Could be used by widgets that must reflect the current advanced digitizing state.

:param enabled: Whether the Z parameter is enabled or not.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.22
%End

    void enabledChangedM( bool enabled );
%Docstring
Emitted whenever the M field is enabled or disabled. Depending on the context, some parameters
do not make sense (e.g. you need a previous point to define a distance).
Could be used by widgets that must reflect the current advanced digitizing state.

:param enabled: Whether the M parameter is enabled or not.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.22
%End

    void enabledChangedAngle( bool enabled );
%Docstring
Emitted whenever the angle field is enabled or disabled. Depending on the context, some parameters
do not make sense (e.g. you need a previous point to define a distance).
Could be used by widgets that must reflect the current advanced digitizing state.

:param enabled: Whether the angle parameter is enabled or not.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void enabledChangedDistance( bool enabled );
%Docstring
Emitted whenever the distance field is enabled or disabled. Depending on the context, some parameters
do not make sense (e.g. you need a previous point to define a distance).
Could be used by widgets that must reflect the current advanced digitizing state.

:param enabled: Whether the distance parameter is enabled or not.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void focusOnXRequested();
%Docstring
Emitted whenever the X field should get the focus using the shortcuts (X).
Could be used by widgets to capture the focus when a field is being edited.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void focusOnYRequested();
%Docstring
Emitted whenever the Y field should get the focus using the shortcuts (Y).
Could be used by widgets to capture the focus when a field is being edited.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void focusOnZRequested();
%Docstring
Emitted whenever the Z field should get the focus using the shortcuts (Z).
Could be used by widgets to capture the focus when a field is being edited.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.22
%End

    void focusOnMRequested();
%Docstring
Emitted whenever the M field should get the focus using the shortcuts (M).
Could be used by widgets to capture the focus when a field is being edited.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.22
%End

    void focusOnAngleRequested();
%Docstring
Emitted whenever the angle field should get the focus using the shortcuts (A).
Could be used by widgets to capture the focus when a field is being edited.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End

    void focusOnDistanceRequested();
%Docstring
Emitted whenever the distance field should get the focus using the shortcuts (D).
Could be used by widgets to capture the focus when a field is being edited.

.. note::

   unstable API (will likely change)

.. versionadded:: 3.8
%End


  private:
    //! event filter for line edits in the dock UI (angle/distance/x/y line edits)
    bool eventFilter( QObject *obj, QEvent *event );
};

QFlags<QgsAdvancedDigitizingDockWidget::CadCapacity> operator|(QgsAdvancedDigitizingDockWidget::CadCapacity f1, QFlags<QgsAdvancedDigitizingDockWidget::CadCapacity> f2);


/************************************************************************
 * This file has been generated automatically from                      *
 *                                                                      *
 * src/gui/qgsadvanceddigitizingdockwidget.h                            *
 *                                                                      *
 * Do not edit manually ! Edit header and run scripts/sipify.pl again   *
 ************************************************************************/