#include <zebra.h>
#include "command.h"
DEFSH (0, show_ipv6_mbgp_cmd_vtysh,
"show ipv6 mbgp",
"Show running system information\n"
"IP information\n"
"MBGP information\n")
DEFSH (0, show_ip_community_list_arg_cmd_vtysh,
"show ip community-list (<1-500>|WORD)",
"Show running system information\n"
"IP information\n"
"List community-list\n"
"Community-list number\n"
"Community-list name\n")
DEFSH (0, show_ipv6_ospf6_interface_cmd_vtysh,
"show ipv6 ospf6 interface",
"Show running system information\n"
"IPv6 Information\n"
"Open Shortest Path First (OSPF) for IPv6\n"
"Interface infomation\n"
)
DEFSH (0, no_neighbor_distribute_list_cmd_vtysh,
"no neighbor (A.B.C.D|X:X::X:X|WORD) " "distribute-list (<1-199>|<1300-2699>|WORD) (in|out)",
"Negate a command or set its defaults\n"
"Specify neighbor router\n"
"Neighbor address\nNeighbor IPv6 address\nNeighbor tag\n"
"Filter updates to/from this neighbor\n"
"IP access-list number\n"
"IP access-list number (expanded range)\n"
"IP Access-list name\n"
"Filter incoming updates\n"
"Filter outgoing updates\n")
DEFSH (0, ospf_area_vlink_param1_cmd_vtysh,
"area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D "
"(hello-interval|retransmit-interval|transmit-delay|dead-interval) <1-65535>",
"OSPF area parameters\n" "OSPF area ID in IP address format\n" "OSPF area ID as a decimal value\n" "Configure a virtual link\n" "Router ID of the remote ABR\n"
"Time between HELLO packets\n" "Time between retransmitting lost link state advertisements\n" "Link state transmit delay\n" "Interval after which a neighbor is declared dead\n" "Seconds\n")
DEFSH (0, no_rip_offset_list_ifname_cmd_vtysh,
"no offset-list WORD (in|out) <0-16> IFNAME",
"Negate a command or set its defaults\n"
"Modify RIP metric\n"
"Access-list name\n"
"For incoming updates\n"
"For outgoing updates\n"
"Metric value\n"
"Interface to match\n")
DEFSH (0, no_debug_bgp_as4_cmd_vtysh,
"no debug bgp as4",
"Negate a command or set its defaults\n"
"Debugging functions (see also 'undebug')\n"
"BGP information\n"
"BGP AS4 actions\n")
DEFSH (0, clear_ip_bgp_all_ipv4_soft_in_cmd_vtysh,
"clear ip bgp * ipv4 (unicast|multicast) soft in",
"Reset functions\n"
"IP information\n"
"BGP information\n"
"Clear all peers\n"
"Address family\n"
"Address Family modifier\n"
"Address Family modifier\n"
"Soft reconfig\n"
"Soft reconfig inbound update\n")
DEFSH (0, no_neighbor_maximum_prefix_cmd_vtysh,
"no neighbor (A.B.C.D|X:X::X:X|WORD) " "maximum-prefix",
"Negate a command or set its defaults\n"
"Specify neighbor router\n"
"Neighbor address\nNeighbor IPv6 address\nNeighbor tag\n"
"Maximum number of prefix accept from this peer\n")
DEFSH (0, show_ipv6_mbgp_prefix_longer_cmd_vtysh,
"show ipv6 mbgp X:X::X:X/M longer-prefixes",
"Show running system information\n"
"IPv6 information\n"
"MBGP information\n"
"IPv6 prefix <network>/<length>, e.g., 3ffe::/16\n"
"Display route and more specific routes\n")
DEFSH (0, no_ospf_area_vlink_param1_cmd_vtysh,
"no area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D "
"(hello-interval|retransmit-interval|transmit-delay|dead-interval)",
"Negate a command or set its defaults\n"
"OSPF area parameters\n" "OSPF area ID in IP address format\n" "OSPF area ID as a decimal value\n" "Configure a virtual link\n" "Router ID of the remote ABR\n"
"Time between HELLO packets\n" "Time between retransmitting lost link state advertisements\n" "Link state transmit delay\n" "Interval after which a neighbor is declared dead\n" "Seconds\n")
DEFSH (0, show_ipv6_mbgp_regexp_cmd_vtysh,
"show ipv6 mbgp regexp .LINE",
"Show running system information\n"
"IP information\n"
"BGP information\n"
"Display routes matching the AS path regular expression\n"
"A regular-expression to match the MBGP AS paths\n")
DEFSH (0, accept_lifetime_day_month_day_month_cmd_vtysh,
"accept-lifetime HH:MM:SS <1-31> MONTH <1993-2035> HH:MM:SS <1-31> MONTH <1993-2035>",
"Set accept lifetime of the key\n"
"Time to start\n"
"Day of th month to start\n"
"Month of the year to start\n"
"Year to start\n"
"Time to expire\n"
"Day of th month to expire\n"
"Month of the year to expire\n"
"Year to expire\n")
DEFSH (0, no_set_community_val_cmd_vtysh,
"no set community .AA:NN",
"Negate a command or set its defaults\n"
"Set values in destination routing protocol\n"
"BGP community attribute\n"
"Community number in aa:nn format or local-AS|no-advertise|no-export|internet or additive\n")
DEFSH (0, show_ipv6_bgp_community_list_exact_cmd_vtysh,
"show ipv6 bgp community-list WORD exact-match",
"Show running system information\n"
"IPv6 information\n"
"BGP information\n"
"Display routes matching the community-list\n"
"community-list name\n"
"Exact match of the communities\n")
DEFSH (0, show_bgp_view_afi_safi_community_cmd_vtysh,
"show bgp view WORD (ipv4|ipv6) (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export)",
"Show running system information\n"
"BGP information\n"
"BGP view\n"
"View name\n"
"Address family\n"
"Address family\n"
"Address family modifier\n"
"Address family modifier\n"
"Display routes matching the communities\n"
"community number\n"
"Do not send outside local AS (well-known community)\n"
"Do not advertise to any peer (well-known community)\n"
"Do not export to next AS (well-known community)\n")
DEFSH (0, no_neighbor_attr_unchanged9_cmd_vtysh,
"no neighbor (A.B.C.D|X:X::X:X|WORD) " "attribute-unchanged med next-hop as-path",
"Negate a command or set its defaults\n"
"Specify neighbor router\n"
"Neighbor address\nNeighbor IPv6 address\nNeighbor tag\n"
"BGP attribute is propagated unchanged to this neighbor\n"
"Med attribute\n"
"Nexthop attribute\n"
"As-path attribute\n")
DEFSH (0, ospf_max_metric_router_lsa_shutdown_cmd_vtysh,
"max-metric router-lsa on-shutdown <5-86400>",
"OSPF maximum / infinite-distance metric\n"
"Advertise own Router-LSA with infinite distance (stub router)\n"
"Advertise stub-router prior to full shutdown of OSPF\n"
"Time (seconds) to wait till full shutdown\n")
DEFSH (0, no_debug_ospf_zebra_sub_cmd_vtysh,
"no debug ospf zebra (interface|redistribute)",
"Negate a command or set its defaults\n"
"Debugging functions (see also 'undebug')\n"
"OSPF information\n"
"OSPF Zebra information\n"
"Zebra interface\n"
"Zebra redistribute\n")
DEFSH (0, no_ip_rip_authentication_string_cmd_vtysh,
"no ip rip authentication string",
"Negate a command or set its defaults\n"
"IP information\n"
"Routing Information Protocol\n"
"Authentication control\n"
"Authentication string\n")
DEFSH (0, clear_ip_bgp_instance_all_soft_cmd_vtysh,
"clear ip bgp view WORD * soft",
"Reset functions\n"
"IP information\n"
"BGP information\n"
"BGP view\n"
"view name\n"
"Clear all peers\n"
"Soft reconfig\n")
DEFSH (0, no_capability_opaque_cmd_vtysh,
"no capability opaque",
"Negate a command or set its defaults\n"
"Enable specific OSPF feature\n"
"Opaque LSA\n")
DEFSH (0, show_bgp_community3_exact_cmd_vtysh,
"show bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) exact-match",
"Show running system information\n"
"BGP information\n"
"Display routes matching the communities\n"
"community number\n"
"Do not send outside local AS (well-known community)\n"
"Do not advertise to any peer (well-known community)\n"
"Do not export to next AS (well-known community)\n"
"community number\n"
"Do not send outside local AS (well-known community)\n"
"Do not advertise to any peer (well-known community)\n"
"Do not export to next AS (well-known community)\n"
"community number\n"
"Do not send outside local AS (well-known community)\n"
"Do not advertise to any peer (well-known community)\n"
"Do not export to next AS (well-known community)\n"
"Exact match of the communities")
DEFSH (0, send_lifetime_day_month_month_day_cmd_vtysh,
"send-lifetime HH:MM:SS <1-31> MONTH <1993-2035> HH:MM:SS MONTH <1-31> <1993-2035>",
"Set send lifetime of the key\n"
"Time to start\n"
"Day of th month to start\n"
"Month of the year to start\n"
"Year to start\n"
"Time to expire\n"
"Month of the year to expire\n"
"Day of th month to expire\n"
"Year to expire\n")
DEFSH (0, show_bgp_view_neighbor_routes_cmd_vtysh,
"show bgp view WORD neighbors (A.B.C.D|X:X::X:X) routes",
"Show running system information\n"
"BGP information\n"
"BGP view\n"
"View name\n"
"Detailed information on TCP and BGP neighbor connections\n"
"Neighbor to display information about\n"
"Neighbor to display information about\n"
"Display routes learned from neighbor\n")
DEFSH (0, no_ipv6_bgp_network_route_map_cmd_vtysh,
"no network X:X::X:X/M route-map WORD",
"Negate a command or set its defaults\n"
"Specify a network to announce via BGP\n"
"IPv6 prefix <network>/<length>\n"
"Route-map to modify the attributes\n"
"Name of the route map\n")
DEFSH (0, no_ip_route_distance_cmd_vtysh,
"no ip route A.B.C.D/M (A.B.C.D|INTERFACE|null0) <1-255>",
"Negate a command or set its defaults\n"
"IP information\n"
"Establish static routes\n"
"IP destination prefix (e.g. 10.0.0.0/8)\n"
"IP gateway address\n"
"IP gateway interface name\n"
"Null interface\n"
"Distance value for this route\n")
DEFSH (0, show_ip_ospf_neighbor_int_cmd_vtysh,
"show ip ospf neighbor IFNAME",
"Show running system information\n"
"IP information\n"
"OSPF information\n"
"Neighbor list\n"
"Interface name\n")
DEFSH (0, no_match_origin_val_cmd_vtysh,
"no match origin (egp|igp|incomplete)",
"Negate a command or set its defaults\n"
"Match values from routing table\n"
"BGP origin code\n"
"remote EGP\n"
"local IGP\n"
"unknown heritage\n")
DEFSH (0, show_bgp_ipv6_neighbor_advertised_route_cmd_vtysh,
"show bgp ipv6 neighbors (A.B.C.D|X:X::X:X) advertised-routes",
"Show running system information\n"
"BGP information\n"
"Address family\n"
"Detailed information on TCP and BGP neighbor connections\n"
"Neighbor to display information about\n"
"Neighbor to display information about\n"
"Display the routes advertised to a BGP neighbor\n")
DEFSH (0, area_passwd_md5_snpauth_cmd_vtysh,
"area-password md5 WORD authenticate snp (send-only|validate)",
"Configure the authentication password for an area\n"
"Authentication type\n"
"Area password\n"
"Authentication\n"
"SNP PDUs\n"
"Send but do not check PDUs on receiving\n"
"Send and check PDUs on receiving\n")
DEFSH (0|0|0, no_router_zebra_cmd_vtysh,
"no router zebra",
"Negate a command or set its defaults\n"
"Disable a routing process\n"
"Stop connection to zebra daemon\n")
DEFSH (0, no_bgp_graceful_restart_cmd_vtysh,
"no bgp graceful-restart",
"Negate a command or set its defaults\n"
"BGP specific commands\n"
"Graceful restart capability parameters\n")
DEFSH (0, no_router_bgp_cmd_vtysh,
"no router bgp " "<1-4294967295>",
"Negate a command or set its defaults\n"
"Enable a routing process\n"
"BGP information\n"
"AS number\n")
DEFSH (0, show_ip_route_cmd_vtysh,
"show ip route",
"Show running system information\n"
"IP information\n"
"IP routing table\n")
DEFSH (0, show_ip_bgp_view_neighbor_advertised_route_cmd_vtysh,
"show ip bgp view WORD neighbors (A.B.C.D|X:X::X:X) advertised-routes",
"Show running system information\n"
"IP information\n"
"BGP information\n"
"BGP view\n"
"View name\n"
"Detailed information on TCP and BGP neighbor connections\n"
"Neighbor to display information about\n"
"Neighbor to display information about\n"
"Display the routes advertised to a BGP neighbor\n")
DEFSH (0, no_ospf6_interface_area_cmd_vtysh,
"no interface IFNAME area A.B.C.D",
"Negate a command or set its defaults\n"
"Disable routing on an IPv6 interface\n"
"Interface name(e.g. ep0)\n"
"Specify the OSPF6 area ID\n"
"OSPF6 area ID in IPv4 address notation\n"
)
DEFSH (0, clear_bgp_all_cmd_vtysh,
"clear bgp *",
"Reset functions\n"
"BGP information\n"
"Clear all peers\n")
DEFSH (0, no_ipv6_nd_adv_interval_config_option_cmd_vtysh,
"no ipv6 nd adv-interval-option",
"Negate a command or set its defaults\n"
"Interface IPv6 config commands\n"
"Neighbor discovery\n"
"Advertisement Interval Option\n")
DEFSH (0, show_ip_protocol_cmd_vtysh,
"show ip protocol",
"Show running system information\n"
"IP information\n"
"IP protocol filtering status\n")
DEFSH (0, no_neighbor_default_originate_rmap_cmd_vtysh,
"no neighbor (A.B.C.D|X:X::X:X|WORD) " "default-originate route-map WORD",
"Negate a command or set its defaults\n"
"Specify neighbor router\n"
"Neighbor address\nNeighbor IPv6 address\nNeighbor tag\n"
"Originate default route to this neighbor\n"
"Route-map to specify criteria to originate default\n"
"route-map name\n")
DEFSH (0, ospf_transmit_delay_cmd_vtysh,
"ospf transmit-delay <1-65535>",
"OSPF interface commands\n"
"Link state transmit delay\n"
"Seconds\n")
DEFSH (0, show_ip_bgp_ipv4_summary_cmd_vtysh,
"show ip bgp ipv4 (unicast|multicast) summary",
"Show running system information\n"
"IP information\n"
"BGP information\n"
"Address family\n"
"Address Family modifier\n"
"Address Family modifier\n"
"Summary of BGP neighbor status\n")
DEFSH (0, ipv6_nd_ra_interval_cmd_vtysh,
"ipv6 nd ra-interval <1-1800>",
"Interface IPv6 config commands\n"
"Neighbor discovery\n"
"Router Advertisement interval\n"
"Router Advertisement interval in seconds\n")
DEFSH (0, no_ripng_default_metric_cmd_vtysh,
"no default-metric",
"Negate a command or set its defaults\n"
"Set a metric of redistribute routes\n"
"Default metric\n")
DEFSH (0, show_ipv6_ospf6_database_type_self_originated_detail_cmd_vtysh,
"show ipv6 ospf6 database "
"(router|network|inter-prefix|inter-router|as-external|"
"group-membership|type-7|link|intra-prefix) self-originated "
"(detail|dump|internal)",
"Show running system information\n"
"IPv6 information\n"
"Open Shortest Path First (OSPF) for IPv6\n"
"Display Link state database\n"
"Display Router LSAs\n"
"Display Network LSAs\n"
"Display Inter-Area-Prefix LSAs\n"
"Display Inter-Area-Router LSAs\n"
"Display As-External LSAs\n"
"Display Group-Membership LSAs\n"
"Display Type-7 LSAs\n"
"Display Link LSAs\n"
"Display Intra-Area-Prefix LSAs\n"
"Display Self-originated LSAs\n"
"Display details of LSAs\n"
"Dump LSAs\n"
"Display LSA's internal information\n"
)
DEFSH (0, show_ip_bgp_vpnv4_rd_summary_cmd_vtysh,
"show ip bgp vpnv4 rd ASN:nn_or_IP-address:nn summary",
"Show running system information\n"
"IP information\n"
"BGP information\n"
"Display VPNv4 NLRI specific information\n"
"Display information for a route distinguisher\n"
"VPN Route Distinguisher\n"
"Summary of BGP neighbor status\n")
DEFSH (0, no_debug_ospf6_neighbor_detail_cmd_vtysh,
"no debug ospf6 neighbor (state|event)",
"Negate a command or set its defaults\n"
"Debugging functions (see also 'undebug')\n"
"Open Shortest Path First (OSPF) for IPv6\n"
"Debug OSPFv3 Neighbor\n"
"Debug OSPFv3 Neighbor State Change\n"
"Debug OSPFv3 Neighbor Event\n"
)
DEFSH (0, ospf_area_range_substitute_cmd_vtysh,
"area (A.B.C.D|<0-4294967295>) range A.B.C.D/M substitute A.B.C.D/M",
"OSPF area parameters\n"
"OSPF area ID in IP address format\n"
"OSPF area ID as a decimal value\n"
"Summarize routes matching address/mask (border routers only)\n"
"Area range prefix\n"
"Announce area range as another prefix\n"
"Network prefix to be announced instead of range\n")
DEFSH (0, no_mpls_te_cmd_vtysh,
"no mpls-te",
"Negate a command or set its defaults\n"
"Configure MPLS-TE parameters\n"
"Disable the MPLS-TE functionality\n")
DEFSH (0, show_bgp_neighbor_advertised_route_cmd_vtysh,
"show bgp neighbors (A.B.C.D|X:X::X:X) advertised-routes",
"Show running system information\n"
"BGP information\n"
"Detailed information on TCP and BGP neighbor connections\n"
"Neighbor to display information about\n"
"Neighbor to display information about\n"
"Display the routes advertised to a BGP neighbor\n")
DEFSH (0, no_ipv6_ospf6_ifmtu_cmd_vtysh,
"no ipv6 ospf6 ifmtu",
"Negate a command or set its defaults\n"
"IPv6 Information\n"
"Open Shortest Path First (OSPF) for IPv6\n"
"Interface MTU\n"
)
DEFSH (0, show_bgp_view_afi_safi_community3_cmd_vtysh,
"show bgp view WORD (ipv4|ipv6) (unicast|multicast) community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)",
"Show running system information\n"
"BGP information\n"
"BGP view\n"
"View name\n"
"Address family\n"
"Address family\n"
"Address family modifier\n"
"Address family modifier\n"
"Display routes matching the communities\n"
"community number\n"
"Do not send outside local AS (well-known community)\n"
"Do not advertise to any peer (well-known community)\n"
"Do not export to next AS (well-known community)\n"
"community number\n"
"Do not send outside local AS (well-known community)\n"
"Do not advertise to any peer (well-known community)\n"
"Do not export to next AS (well-known community)\n"
"community number\n"
"Do not send outside local AS (well-known community)\n"
"Do not advertise to any peer (well-known community)\n"
"Do not export to next AS (well-known community)\n")
DEFSH (0, no_neighbor_timers_connect_val_cmd_vtysh,
"no neighbor (A.B.C.D|X:X::X:X) " "timers connect <0-65535>",
"Negate a command or set its defaults\n"
"Specify neighbor router\n"
"Neighbor address\nIPv6 address\n"
"BGP per neighbor timers\n"
"BGP connect timer\n"
"Connect timer\n")
DEFSH (0, babel_set_resend_delay_cmd_vtysh,
"babel resend-delay <20-655340>",
"Babel commands\n"
"Time before resending a message\n"
"Milliseconds\n")
DEFSH (0, no_access_list_extended_any_mask_cmd_vtysh,
"no access-list (<100-199>|<2000-2699>) (deny|permit) ip any A.B.C.D A.B.C.D",
"Negate a command or set its defaults\n"
"Add an access list entry\n"
"IP extended access list\n"
"IP extended access list (expanded range)\n"
"Specify packets to reject\n"
"Specify packets to forward\n"
"Any Internet Protocol\n"
"Any source host\n"
"Destination address\n"
"Destination Wildcard bits\n")
DEFSH (0, ip_irdp_debug_misc_cmd_vtysh,
"ip irdp debug misc",
"IP information\n"
"ICMP Router discovery debug Averts. and Solicits (short)\n")
DEFSH (0, show_database_detail_cmd_vtysh,
"show isis database detail",
"Show running system information\n"
"IS-IS information\n"
"IS-IS link state database\n")
DEFSH (0|0|0|0|0|0, rmap_onmatch_goto_cmd_vtysh,
"on-match goto <1-65535>",
"Exit policy on matches\n"
"Goto Clause number\n"
"Number\n")
DEFSH (0, clear_bgp_ipv6_peer_soft_in_cmd_vtysh,
"clear bgp ipv6 (A.B.C.D|X:X::X:X) soft in",
"Reset functions\n"
"BGP information\n"
"Address family\n"
"BGP neighbor address to clear\n"
"BGP IPv6 neighbor to clear\n"
"Soft reconfig\n"
"Soft reconfig inbound update\n")
DEFSH (0, clear_bgp_ipv6_peer_in_cmd_vtysh,
"clear bgp ipv6 (A.B.C.D|X:X::X:X) in",
"Reset functions\n"
"BGP information\n"
"Address family\n"
"BGP neighbor address to clear\n"
"BGP IPv6 neighbor to clear\n"
"Soft reconfig inbound update\n")
DEFSH (0, show_ip_bgp_summary_cmd_vtysh,
"show ip bgp summary",
"Show running system information\n"
"IP information\n"
"BGP information\n"
"Summary of BGP neighbor status\n")
DEFSH (0, no_lsp_gen_interval_l1_cmd_vtysh,
"no lsp-gen-interval level-1",
"Negate a command or set its defaults\n"
"Minimum interval between regenerating same LSP\n"
"Set interval for level 1 only\n")
DEFSH (0, ospf_area_filter_list_cmd_vtysh,
"area (A.B.C.D|<0-4294967295>) filter-list prefix WORD (in|out)",
"OSPF area parameters\n"
"OSPF area ID in IP address format\n"
"OSPF area ID as a decimal value\n"
"Filter networks between OSPF areas\n"
"Filter prefixes between OSPF areas\n"
"Name of an IP prefix-list\n"
"Filter networks sent to this area\n"
"Filter networks sent from this area\n")
DEFSH (0, show_ip_bgp_instance_ipv4_rsclient_summary_cmd_vtysh,
"show ip bgp view WORD ipv4 (unicast|multicast) rsclient summary",
"Show running system information\n"
"IP information\n"
"BGP information\n"
"BGP view\n"
"View name\n"
"Address family\n"
"Address Family modifier\n"
"Address Family modifier\n"
"Information about Route Server Clients\n"
"Summary of all Route Server Clients\n")
DEFSH (0, clear_bgp_ipv6_peer_group_soft_in_cmd_vtysh,
"clear bgp ipv6 peer-group WORD soft in",
"Reset functions\n"
"BGP information\n"
"Address family\n"
"Clear all members of peer-group\n"
"BGP peer-group name\n"
"Soft reconfig\n"
"Soft reconfig inbound update\n")
DEFSH (0, no_isis_metric_l2_cmd_vtysh,
"no isis metric level-2",
"Negate a command or set its defaults\n"
"IS-IS commands\n"
"Set default metric for circuit\n"
"Specify metric for level-2 routing\n")
DEFSH (0, no_ospf_log_adjacency_changes_detail_cmd_vtysh,
"no log-adjacency-changes detail",
"Negate a command or set its defaults\n"
"Log changes in adjacency state\n"
"Log all state changes\n")
DEFSH (0, show_ip_bgp_view_prefix_cmd_vtysh,
"show ip bgp view WORD A.B.C.D/M",
"Show running system information\n"
"IP information\n"
"BGP information\n"
"BGP view\n"
"View name\n"
"IP prefix <network>/<length>, e.g., 35.0.0.0/8\n")
DEFSH (0, show_ipv6_ospf6_route_type_detail_cmd_vtysh,
"show ipv6 ospf6 route (intra-area|inter-area|external-1|external-2) detail",
"Show running system information\n"
"IPv6 Information\n"
"Open Shortest Path First (OSPF) for IPv6\n"
"Routing Table\n"
"Display Intra-Area routes\n"
"Display Inter-Area routes\n"
"Display Type-1 External routes\n"
"Display Type-2 External routes\n"
"Detailed information\n"
)
DEFSH (0, no_ospf_network_area_cmd_vtysh,
"no network A.B.C.D/M area (A.B.C.D|<0-4294967295>)",
"Negate a command or set its defaults\n"
"Enable routing on an IP network\n"
"OSPF network prefix\n"
"Set the OSPF area ID\n"
"OSPF area ID in IP address format\n"
"OSPF area ID as a decimal value\n")
DEFSH (0, bgp_deterministic_med_cmd_vtysh,
"bgp deterministic-med",
"BGP specific commands\n"
"Pick the best-MED path among paths advertised from the neighboring AS\n")
DEFSH (0, undebug_bgp_as4_cmd_vtysh,
"undebug bgp as4",
"Disable debugging functions (see also 'debug')\n"
"BGP information\n"
"BGP AS4 actions\n")
DEFSH (0, show_bgp_ipv4_safi_rsclient_summary_cmd_vtysh,
"show bgp ipv4 (unicast|multicast) rsclient summary",
"Show running system information\n"
"BGP information\n"
"Address family\n"
"Address Family modifier\n"
"Address Family modifier\n"
"Information about Route Server Clients\n"
"Summary of all Route Server Clients\n")
DEFSH (0, clear_bgp_peer_group_out_cmd_vtysh,
"clear bgp peer-group WORD out",
"Reset functions\n"
"BGP information\n"
"Clear all members of peer-group\n"
"BGP peer-group name\n"
"Soft reconfig outbound update\n")
DEFSH (0, no_ospf_max_metric_router_lsa_admin_cmd_vtysh,
"no max-metric router-lsa administrative",
"Negate a command or set its defaults\n"
"OSPF maximum / infinite-distance metric\n"
"Advertise own Router-LSA with infinite distance (stub router)\n"
"Administratively applied, for an indefinite period\n")
DEFSH (0, show_bgp_view_ipv4_safi_rsclient_cmd_vtysh,
"show bgp view WORD ipv4 (unicast|multicast) rsclient (A.B.C.D|X:X::X:X)",
"Show running system information\n"
"BGP information\n"
"BGP view\n"
"View name\n"
"Address family\n"
"Address Family modifier\n"
"Address Family modifier\n"
"Information about Route Server Client\n"
"Neighbor address\nIPv6 address\n")
DEFSH (0, ospf_default_metric_cmd_vtysh,
"default-metric <0-16777214>",
"Set metric of redistributed routes\n"
"Default metric\n")
DEFSH (0, no_match_probability_cmd_vtysh,
"no match probability",
"Negate a command or set its defaults\n"
"Match values from routing table\n"
"Match portion of routes defined by percentage value\n")
DEFSH (0, aggregate_address_summary_only_cmd_vtysh,
"aggregate-address A.B.C.D/M summary-only",
"Configure BGP aggregate entries\n"
"Aggregate prefix\n"
"Filter more specific routes from updates\n")
DEFSH (0, no_set_pathlimit_ttl_val_cmd_vtysh,
"no set pathlimit ttl <1-255>",
"Negate a command or set its defaults\n"
"Match values from routing table\n"
"BGP AS-Pathlimit attribute\n"
"Set AS-Path Hop-count TTL\n")
DEFSH (0, show_database_detail_arg_cmd_vtysh,
"show isis database detail WORD",
"Show running system information\n"
"IS-IS information\n"
"IS-IS link state database\n"
"Detailed information\n"
"LSP ID\n")
DEFSH (0, isis_priority_l2_cmd_vtysh,
"isis priority <0-127> level-2",
"IS-IS commands\n"
"Set priority for Designated Router election\n"
"Priority value\n"
"Specify priority for level-2 routing\n")
DEFSH (0, show_ipv6_ospf6_database_linkstate_id_cmd_vtysh,
"show ipv6 ospf6 database linkstate-id A.B.C.D",
"Show running system information\n"
"IPv6 information\n"
"Open Shortest Path First (OSPF) for IPv6\n"
"Display Link state database\n"
"Search by Link state ID\n"
"Specify Link state ID as IPv4 address notation\n"
)
DEFSH (0, clear_ip_bgp_all_vpnv4_soft_out_cmd_vtysh,
"clear ip bgp * vpnv4 unicast soft out",
"Reset functions\n"
"IP information\n"
"BGP information\n"
"Clear all peers\n"
"Address family\n"
"Address Family Modifier\n"
"Soft reconfig\n"
"Soft reconfig outbound update\n")
DEFSH (0, no_set_origin_val_cmd_vtysh,
"no set origin (egp|igp|incomplete)",
"Negate a command or set its defaults\n"
"Set values in destination routing protocol\n"
"BGP origin code\n"
"remote EGP\n"
"local IGP\n"
"unknown heritage\n")
DEFSH (0, no_ripng_timers_val_cmd_vtysh,
"no timers basic <0-65535> <0-65535> <0-65535>",
"Negate a command or set its defaults\n"
"RIPng timers setup\n"
"Basic timer\n"
"Routing table update timer value in second. Default is 30.\n"
"Routing information timeout timer. Default is 180.\n"
"Garbage collection timer. Default is 120.\n")
DEFSH (0, bgp_damp_set3_cmd_vtysh,
"bgp dampening",
"BGP Specific commands\n"
"Enable route-flap dampening\n")
DEFSH (0, no_rip_offset_list_cmd_vtysh,
"no offset-list WORD (in|out) <0-16>",
"Negate a command or set its defaults\n"
"Modify RIP metric\n"
"Access-list name\n"
"For incoming updates\n"
"For outgoing updates\n"
"Metric value\n")
DEFSH (0, show_ipv6_ospf6_database_type_self_originated_linkstate_id_detail_cmd_vtysh,
"show ipv6 ospf6 database "
"(router|network|inter-prefix|inter-router|as-external|"
"group-membership|type-7|link|intra-prefix) self-originated "
"linkstate-id A.B.C.D (detail|dump|internal)",
"Show running system information\n"
"IPv6 information\n"
"Open Shortest Path First (OSPF) for IPv6\n"
"Display Link state database\n"
"Display Router LSAs\n"
"Display Network LSAs\n"
"Display Inter-Area-Prefix LSAs\n"
"Display Inter-Area-Router LSAs\n"
"Display As-External LSAs\n"
"Display Group-Membership LSAs\n"
"Display Type-7 LSAs\n"
"Display Link LSAs\n"
"Display Intra-Area-Prefix LSAs\n"
"Display Self-originated LSAs\n"
"Search by Link state ID\n"
"Specify Link state ID as IPv4 address notation\n"
"Display details of LSAs\n"
"Dump LSAs\n"
"Display LSA's internal information\n"
)
DEFSH (0, ipv6_bgp_network_route_map_cmd_vtysh,
"network X:X::X:X/M route-map WORD",
"Specify a network to announce via BGP\n"
"IPv6 prefix <network>/<length>\n"
"Route-map to modify the attributes\n"
"Name of the route map\n")
DEFSH (0, no_lsp_refresh_interval_l2_cmd_vtysh,
"no lsp-refresh-interval level-2",
"Negate a command or set its defaults\n"
"LSP refresh interval for Level 2 only in seconds\n")
DEFSH (0, no_debug_isis_upd_cmd_vtysh,
"no debug isis update-packets",
"Disable debugging functions (see also 'debug')\n"
"IS-IS information\n"
"IS-IS Update related packets\n")
DEFSH (0, no_ip_route_flags_distance_cmd_vtysh,
"no ip route A.B.C.D/M (A.B.C.D|INTERFACE) (reject|blackhole) <1-255>",
"Negate a command or set its defaults\n"
"IP information\n"
"Establish static routes\n"
"IP destination prefix (e.g. 10.0.0.0/8)\n"
"IP gateway address\n"
"IP gateway interface name\n"
"Emit an ICMP unreachable when matched\n"
"Silently discard pkts when matched\n"
"Distance value for this route\n")
DEFSH (0, debug_ripng_zebra_cmd_vtysh,
"debug ripng zebra",
"Debugging functions (see also 'undebug')\n"
"RIPng configuration\n"
"Debug option set for ripng and zebra communication\n")
DEFSH (0, no_ospf_refresh_timer_val_cmd_vtysh,
"no refresh timer <10-1800>",
"Adjust refresh parameters\n"
"Unset refresh timer\n"
"Timer value in seconds\n")
DEFSH (0, no_neighbor_remote_as_cmd_vtysh,
"no neighbor (A.B.C.D|X:X::X:X) " "remote-as " "<1-4294967295>",
"Negate a command or set its defaults\n"
"Specify neighbor router\n"
"Neighbor address\nIPv6 address\n"
"Specify a BGP neighbor\n"
"AS number\n")
DEFSH (0, set_vpnv4_nexthop_cmd_vtysh,
"set vpnv4 next-hop A.B.C.D",
"Set values in destination routing protocol\n"
"VPNv4 information\n"
"VPNv4 next-hop address\n"
"IP address of next hop\n")
DEFSH (0|0|0|0, no_ipv6_prefix_list_prefix_cmd_vtysh,
"no ipv6 prefix-list WORD (deny|permit) (X:X::X:X/M|any)",
"Negate a command or set its defaults\n"
"IPv6 information\n"
"Build a prefix list\n"
"Name of a prefix list\n"
"Specify packets to reject\n"
"Specify packets to forward\n"
"IPv6 prefix <network>/<length>, e.g., 3ffe::/16\n"
"Any prefix match. Same as \"::0/0 le 128\"\n")
DEFSH (0, show_ipv6_ospf6_database_id_detail_cmd_vtysh,
"show ipv6 ospf6 database * A.B.C.D "
"(detail|dump|internal)",
"Show running system information\n"
"IPv6 information\n"
"Open Shortest Path First (OSPF) for IPv6\n"
"Display Link state database\n"
"Any Link state Type\n"
"Specify Link state ID as IPv4 address notation\n"
"Display details of LSAs\n"
"Dump LSAs\n"
"Display LSA's internal information\n"
)
DEFSH (0, show_isis_neighbor_detail_cmd_vtysh,
"show isis neighbor detail",
"Show running system information\n"
"ISIS network information\n"
"ISIS neighbor adjacencies\n"
"show detailed information\n")
DEFSH (0, ipv6_ripng_split_horizon_poisoned_reverse_cmd_vtysh,
"ipv6 ripng split-horizon poisoned-reverse",
"IPv6 information\n"
"Routing Information Protocol\n"
"Perform split horizon\n"
"With poisoned-reverse\n")
DEFSH (0, no_bgp_maxpaths_cmd_vtysh,
"no maximum-paths",
"Negate a command or set its defaults\n"
"Forward packets over multiple paths\n"
"Number of paths\n")
DEFSH (0, debug_ospf_zebra_cmd_vtysh,
"debug ospf zebra",
"Debugging functions (see also 'undebug')\n"
"OSPF information\n"
"OSPF Zebra information\n")
DEFSH (0|0|0|0, show_ip_prefix_list_prefix_first_match_cmd_vtysh,
"show ip prefix-list WORD A.B.C.D/M first-match",
"Show running system information\n"
"IP information\n"
"Build a prefix list\n"
"Name of a prefix list\n"
"IP prefix <network>/<length>, e.g., 35.0.0.0/8\n"
"First matched prefix\n")
DEFSH (0, ipv6_nd_homeagent_lifetime_cmd_vtysh,
"ipv6 nd home-agent-lifetime <0-65520>",
"Interface IPv6 config commands\n"
"Neighbor discovery\n"
"Home Agent lifetime\n"
"Home Agent lifetime in seconds (0 to track ra-lifetime)\n")
DEFSH (0, show_bgp_neighbors_peer_cmd_vtysh,
"show bgp neighbors (A.B.C.D|X:X::X:X)",
"Show running system information\n"
"BGP information\n"
"Detailed information on TCP and BGP neighbor connections\n"
"Neighbor to display information about\n"
"Neighbor to display information about\n")
DEFSH (0, no_ipv6_route_ifname_flags_pref_cmd_vtysh,
"no ipv6 route X:X::X:X/M X:X::X:X INTERFACE (reject|blackhole) <1-255>",
"Negate a command or set its defaults\n"
"IP information\n"
"Establish static routes\n"
"IPv6 destination prefix (e.g. 3ffe:506::/32)\n"
"IPv6 gateway address\n"
"IPv6 gateway interface name\n"
"Emit an ICMP unreachable when matched\n"
"Silently discard pkts when matched\n"
"Distance value for this prefix\n")
DEFSH (0, ospf6_routemap_no_set_forwarding_cmd_vtysh,
"no set forwarding-address X:X::X:X",
"Negate a command or set its defaults\n"
"Set value\n"
"Forwarding Address\n"
"IPv6 Address\n")
DEFSH (0, show_ip_bgp_vpnv4_all_neighbors_cmd_vtysh,
"show ip bgp vpnv4 all neighbors",
"Show running system information\n"
"IP information\n"
"BGP information\n"
"Display VPNv4 NLRI specific information\n"
"Display information about all VPNv4 NLRIs\n"
"Detailed information on TCP and BGP neighbor connections\n")
DEFSH (0, neighbor_send_community_cmd_vtysh,
"neighbor (A.B.C.D|X:X::X:X|WORD) " "send-community",
"Specify neighbor router\n"
"Neighbor address\nNeighbor IPv6 address\nNeighbor tag\n"
"Send Community attribute to this neighbor\n")
DEFSH (0, no_ospf6_stub_router_admin_cmd_vtysh,
"no stub-router administrative",
"Negate a command or set its defaults\n"
"Make router a stub router\n"
"Advertise ability to be a transit router\n"
"Administratively applied, for an indefinite period\n")
DEFSH (0, dump_bgp_updates_cmd_vtysh,
"dump bgp updates PATH",
"Dump packet\n"
"BGP packet dump\n"
"Dump BGP updates only\n"
"Output filename\n")
DEFSH (0, show_ip_bgp_community_list_exact_cmd_vtysh,
"show ip bgp community-list (<1-500>|WORD) exact-match",
"Show running system information\n"
"IP information\n"
"BGP information\n"
"Display routes matching the community-list\n"
"community-list number\n"
"community-list name\n"
"Exact match of the communities\n")
DEFSH (0, clear_ip_bgp_peer_in_prefix_filter_cmd_vtysh,
"clear ip bgp A.B.C.D in prefix-filter",
"Reset functions\n"
"IP information\n"
"BGP information\n"
"BGP neighbor address to clear\n"
"Soft reconfig inbound update\n"
"Push out the existing ORF prefix-list\n")
DEFSH (0, accept_lifetime_infinite_day_month_cmd_vtysh,
"accept-lifetime HH:MM:SS <1-31> MONTH <1993-2035> infinite",
"Set accept lifetime of the key\n"
"Time to start\n"
"Day of th month to start\n"
"Month of the year to start\n"
"Year to start\n"
"Never expires")
DEFSH (0, no_debug_isis_adj_cmd_vtysh,
"no debug isis adj-packets",
"Disable debugging functions (see also 'debug')\n"
"IS-IS information\n"
"IS-IS Adjacency related packets\n")
DEFSH (0, mpls_te_cmd_vtysh,
"mpls-te",
"Configure MPLS-TE parameters\n"
"Enable the MPLS-TE functionality\n")
DEFSH (0, clear_bgp_ipv6_all_soft_out_cmd_vtysh,
"clear bgp ipv6 * soft out",
"Reset functions\n"
"BGP information\n"
"Address family\n"
"Clear all peers\n"
"Soft reconfig\n"
"Soft reconfig outbound update\n")
DEFSH (0, neighbor_ttl_security_cmd_vtysh,
"neighbor (A.B.C.D|X:X::X:X|WORD) " "ttl-security hops <1-254>",
"Specify neighbor router\n"
"Neighbor address\nNeighbor IPv6 address\nNeighbor tag\n"
"Specify the maximum number of hops to the BGP peer\n")
DEFSH (0, no_ip_ospf_message_digest_key_cmd_vtysh,
"no ip ospf message-digest-key <1-255>",
"Negate a command or set its defaults\n"
"IP Information\n"
"OSPF interface commands\n"
"Message digest authentication password (key)\n"
"Key ID\n")
DEFSH (0, debug_zebra_packet_cmd_vtysh,
"debug zebra packet",
"Debugging functions (see also 'undebug')\n"
"Zebra configuration\n"
"Debug option set for zebra packet\n")
DEFSH (0, no_bgp_bestpath_med2_cmd_vtysh,
"no bgp bestpath med confed missing-as-worst",
"Negate a command or set its defaults\n"
"BGP specific commands\n"
"Change the default bestpath selection\n"
"MED attribute\n"
"Compare MED among confederation paths\n"
"Treat missing MED as the least preferred one\n")
DEFSH (0, no_bgp_multiple_instance_cmd_vtysh,
"no bgp multiple-instance",
"Negate a command or set its defaults\n"
"BGP information\n"
"BGP multiple instance\n")
DEFSH (0, no_rip_distance_cmd_vtysh,
"no distance <1-255>",
"Negate a command or set its defaults\n"
"Administrative distance\n"
"Distance value\n")
DEFSH (0, clear_ip_bgp_as_ipv4_soft_cmd_vtysh,
"clear ip bgp " "<1-4294967295>" " ipv4 (unicast|multicast) soft",
"Reset functions\n"
"IP information\n"
"BGP information\n"
"Clear peers with the AS number\n"
"Address family\n"
"Address Family Modifier\n"
"Address Family Modifier\n"
"Soft reconfig\n")
DEFSH (0|0|0|0|0|0, no_route_map_all_cmd_vtysh,
"no route-map WORD",
"Negate a command or set its defaults\n"
"Create route-map or enter route-map command mode\n"
"Route map tag\n")
DEFSH (0, debug_ospf6_brouter_router_cmd_vtysh,
"debug ospf6 border-routers router-id A.B.C.D",
"Debugging functions (see also 'undebug')\n"
"Open Shortest Path First (OSPF) for IPv6\n"
"Debug border router\n"
"Debug specific border router\n"
"Specify border-router's router-id\n"
)
DEFSH (0, neighbor_local_as_no_prepend_replace_as_cmd_vtysh,
"neighbor (A.B.C.D|X:X::X:X|WORD) " "local-as " "<1-4294967295>" " no-prepend replace-as",
"Specify neighbor router\n"
"Neighbor address\nNeighbor IPv6 address\nNeighbor tag\n"
"Specify a local-as number\n"
"AS number used as local AS\n"
"Do not prepend local-as to updates from ebgp peers\n"
"Do not prepend local-as to updates from ibgp peers\n")
DEFSH (0, bgp_distance_source_access_list_cmd_vtysh,
"distance <1-255> A.B.C.D/M WORD",
"Define an administrative distance\n"
"Administrative distance\n"
"IP source prefix\n"
"Access list name\n")
DEFSH (0, show_ip_bgp_community3_cmd_vtysh,
"show ip bgp community (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export) (AA:NN|local-AS|no-advertise|no-export)",
"Show running system information\n"
"IP information\n"
"BGP information\n"
"Display routes matching the communities\n"
"community number\n"
"Do not send outside local AS (well-known community)\n"
"Do not advertise to any peer (well-known community)\n"
"Do not export to next AS (well-known community)\n"
"community number\n"
"Do not send outside local AS (well-known community)\n"
"Do not advertise to any peer (well-known community)\n"
"Do not export to next AS (well-known community)\n"
"community number\n"
"Do not send outside local AS (well-known community)\n"
"Do not advertise to any peer (well-known community)\n"
"Do not export to next AS (well-known community)\n")
DEFSH (0, show_ipv6_ospf6_database_type_self_originated_cmd_vtysh,
"show ipv6 ospf6 database "
"(router|network|inter-prefix|inter-router|as-external|"
"group-membership|type-7|link|intra-prefix) self-originated",
"Show running system information\n"
"IPv6 information\n"
"Open Shortest Path First (OSPF) for IPv6\n"
"Display Link state database\n"
"Display Router LSAs\n"
"Display Network LSAs\n"
"Display Inter-Area-Prefix LSAs\n"
"Display Inter-Area-Router LSAs\n"
"Display As-External LSAs\n"
"Display Group-Membership LSAs\n"
"Display Type-7 LSAs\n"
"Display Link LSAs\n"
"Display Intra-Area-Prefix LSAs\n"
"Display Self-originated LSAs\n"
)
DEFSH (0, no_debug_ospf6_spf_process_cmd_vtysh,
"no debug ospf6 spf process",
"Negate a command or set its defaults\n"
"Debugging functions (see also 'undebug')\n"
"Open Shortest Path First (OSPF) for IPv6\n"
"Quit Debugging SPF Calculation\n"
"Quit Debugging Detailed SPF Process\n"
)
DEFSH (0|0|0|0, no_ip_prefix_list_sequence_number_cmd_vtysh,
"no ip prefix-list sequence-number",
"Negate a command or set its defaults\n"
"IP information\n"
"Build a prefix list\n"
"Include/exclude sequence numbers in NVGEN\n")
DEFSH (0, clear_bgp_peer_group_cmd_vtysh,
"clear bgp peer-group WORD",
"Reset functions\n"
"BGP information\n"
"Clear all members of peer-group\n"
"BGP peer-group name\n")
DEFSH (0, no_neighbor_nexthop_local_unchanged_cmd_vtysh,
"no neighbor (A.B.C.D|X:X::X:X|WORD) " "nexthop-local unchanged",
"Negate a command or set its defaults\n"
"Specify neighbor router\n"
"Neighbor address\nNeighbor IPv6 address\nNeighbor tag\n"
"Configure treatment of outgoing link-local-nexthop attribute\n"
"Leave link-local nexthop unchanged for this peer\n")
DEFSH (0, show_ip_bgp_rsclient_cmd_vtysh,
"show ip bgp rsclient (A.B.C.D|X:X::X:X)",
"Show running system information\n"
"IP information\n"
"BGP information\n"
"Information about Route Server Client\n"
"Neighbor address\nIPv6 address\n")
DEFSH (0, show_bgp_view_rsclient_prefix_cmd_vtysh,
"show bgp view WORD rsclient (A.B.C.D|X:X::X:X) X:X::X:X/M",
"Show running system information\n"
"BGP information\n"
"BGP view\n"
"View name\n"
"Information about Route Server Client\n"
"Neighbor address\nIPv6 address\n"
"IPv6 prefix <network>/<length>, e.g., 3ffe::/16\n")
DEFSH (0, no_metric_style_cmd_vtysh,
"no metric-style",
"Negate a command or set its defaults\n"
"Use old-style (ISO 10589) or new-style packet formats\n")
DEFSH (0, show_bgp_statistics_vpnv4_cmd_vtysh,
"show bgp (ipv4) (vpnv4) statistics",
"Show running system information\n"
"BGP information\n"
"Address family\n"
"Address Family modifier\n"
"BGP RIB advertisement statistics\n")
DEFSH (0, show_bgp_statistics_view_cmd_vtysh,
"show bgp view WORD (ipv4|ipv6) (unicast|multicast) statistics",
"Show running system information\n"
"BGP information\n"
"BGP view\n"
"Address family\n"
"Address family\n"
"Address Family modifier\n"
"Address Family modifier\n"
"BGP RIB advertisement statistics\n")
DEFSH (0, show_ip_ospf_database_cmd_vtysh,
"show ip ospf database",
"Show running system information\n"
"IP information\n"
"OSPF information\n"
"Database summary\n")
DEFSH (0, neighbor_maximum_prefix_threshold_cmd_vtysh,
"neighbor (A.B.C.D|X:X::X:X|WORD) " "maximum-prefix <1-4294967295> <1-100>",
"Specify neighbor router\n"
"Neighbor address\nNeighbor IPv6 address\nNeighbor tag\n"
"Maximum number of prefix accept from this peer\n"
"maximum no. of prefix limit\n"
"Threshold value (%) at which to generate a warning msg\n")
DEFSH (0, no_ipv6_nd_reachable_time_cmd_vtysh,
"no ipv6 nd reachable-time",
"Negate a command or set its defaults\n"
"Interface IPv6 config commands\n"
"Neighbor discovery\n"
"Reachable time\n")
DEFSH (0, show_ip_bgp_ipv4_neighbor_received_prefix_filter_cmd_vtysh,
"show ip bgp ipv4 (unicast|multicast) neighbors (A.B.C.D|X:X::X:X) received prefix-filter",
"Show running system information\n"
"IP information\n"
"BGP information\n"
"Address family\n"
"Address Family modifier\n"
"Address Family modifier\n"
"Detailed information on TCP and BGP neighbor connections\n"
"Neighbor to display information about\n"
"Neighbor to display information about\n"
"Display information received from a BGP neighbor\n"
"Display the prefixlist filter\n")
DEFSH (0|0|0|0, ipv6_prefix_list_seq_le_cmd_vtysh,
"ipv6 prefix-list WORD seq <1-4294967295> (deny|permit) X:X::X:X/M le <0-128>",
"IPv6 information\n"
"Build a prefix list\n"
"Name of a prefix list\n"
"sequence number of an entry\n"
"Sequence number\n"
"Specify packets to reject\n"
"Specify packets to forward\n"
"IPv6 prefix <network>/<length>, e.g., 3ffe::/16\n"
"Maximum prefix length to be matched\n"
"Maximum prefix length\n")
DEFSH (0, show_bgp_ipv4_safi_rsclient_prefix_cmd_vtysh,
"show bgp ipv4 (unicast|multicast) rsclient (A.B.C.D|X:X::X:X) A.B.C.D/M",
"Show running system information\n"
"BGP information\n"
"Address family\n"
"Address Family modifier\n"
"Address Family modifier\n"
"Information about Route Server Client\n"
"Neighbor address\nIPv6 address\n"
"IP prefix <network>/<length>, e.g., 35.0.0.0/8\n")
DEFSH (0, neighbor_maximum_prefix_cmd_vtysh,
"neighbor (A.B.C.D|X:X::X:X|WORD) " "maximum-prefix <1-4294967295>",
"Specify neighbor router\n"
"Neighbor address\nNeighbor IPv6 address\nNeighbor tag\n"
"Maximum number of prefix accept from this peer\n"
"maximum no. of prefix limit\n")
DEFSH (0, domain_passwd_md5_cmd_vtysh,
"domain-password md5 WORD",
"Set the authentication password for a routing domain\n"
"Authentication type\n"
"Routing domain password\n")
DEFSH (0, ipv6_route_flags_cmd_vtysh,
"ipv6 route X:X::X:X/M (X:X::X:X|INTERFACE) (reject|blackhole)",
"IP information\n"
"Establish static routes\n"
"IPv6 destination prefix (e.g. 3ffe:506::/32)\n"
"IPv6 gateway address\n"
"IPv6 gateway interface name\n"
"Emit an ICMP unreachable when matched\n"
"Silently discard pkts when matched\n")
DEFSH (0, clear_ip_bgp_instance_all_ipv4_soft_in_cmd_vtysh,
"clear ip bgp view WORD * ipv4 (unicast|multicast) soft in",
"Reset functions\n"
"IP information\n"
"BGP information\n"
"BGP view\n"
"view name\n"
"Clear all peers\n"
"Address family\n"
"Address Family modifier\n"
"Address Family modifier\n"
"Soft reconfig\n"
"Soft reconfig inbound update\n")
DEFSH (0, show_bgp_view_ipv6_route_cmd_vtysh,
"show bgp view WORD ipv6 X:X::X:X",
"Show running system information\n"
"BGP information\n"
"BGP view\n"
"View name\n"
"Address family\n"
"Network in the BGP routing table to display\n")
DEFSH (0, no_debug_isis_err_cmd_vtysh,
"no debug isis protocol-errors",
"Disable debugging functions (see also 'debug')\n"
"IS-IS information\n"
"IS-IS LSP protocol errors\n")
DEFSH (0, no_isis_hello_interval_arg_cmd_vtysh,
"no isis hello-interval <1-600>",
"Negate a command or set its defaults\n"
"IS-IS commands\n"
"Set Hello interval\n"
"Hello interval value\n"
"Holdtime 1 second, interval depends on multiplier\n")
DEFSH (0, show_ip_bgp_ipv4_community_all_cmd_vtysh,
"show ip bgp ipv4 (unicast|multicast) community",
"Show running system information\n"
"IP information\n"
"BGP information\n"
"Address family\n"
"Address Family modifier\n"
"Address Family modifier\n"
"Display routes matching the communities\n")
DEFSH (0, clear_bgp_as_soft_cmd_vtysh,
"clear bgp " "<1-4294967295>" " soft",
"Reset functions\n"
"BGP information\n"
"Clear peers with the AS number\n"
"Soft reconfig\n")
DEFSH (0, show_ip_mroute_cmd_vtysh,
"show ip mroute",
"Show running system information\n"
"IP information\n"
"IP Multicast routing table\n")
DEFSH (0, access_list_extended_host_any_cmd_vtysh,
"access-list (<100-199>|<2000-2699>) (deny|permit) ip host A.B.C.D any",
"Add an access list entry\n"
"IP extended access list\n"
"IP extended access list (expanded range)\n"
"Specify packets to reject\n"
"Specify packets to forward\n"
"Any Internet Protocol\n"
"A single source host\n"
"Source address\n"
"Any destination host\n")
DEFSH (0, clear_ip_bgp_all_ipv4_out_cmd_vtysh,
"clear ip bgp * ipv4 (unicast|multicast) out",
"Reset functions\n"
"IP information\n"
"BGP information\n"
"Clear all peers\n"
"Address family\n"
"Address Family modifier\n"
"Address Family modifier\n"
"Soft reconfig outbound update\n")
DEFSH (0, no_ip_route_flags_cmd_vtysh,
"no ip route A.B.C.D/M (A.B.C.D|INTERFACE) (reject|blackhole)",
"Negate a command or set its defaults\n"
"IP information\n"
"Establish static routes\n"
"IP destination prefix (e.g. 10.0.0.0/8)\n"
"IP gateway address\n"
"IP gateway interface name\n"
"Emit an ICMP unreachable when matched\n"
"Silently discard pkts when matched\n")
DEFSH (0, lsp_gen_interval_cmd_vtysh,
"lsp-gen-interval <1-120>",
"Minimum interval between regenerating same LSP\n"
"Minimum interval in seconds\n")
DEFSH (0, show_ipv6_bgp_prefix_longer_cmd_vtysh,
"show ipv6 bgp X:X::X:X/M longer-prefixes",
"Show running system information\n"
"IPv6 information\n"
"BGP information\n"
"IPv6 prefix <network>/<length>, e.g., 3ffe::/16\n"
"Display route and more specific routes\n")
DEFSH (0, no_bgp_distance_source_access_list_cmd_vtysh,
"no distance <1-255> A.B.C.D/M WORD",
"Negate a command or set its defaults\n"
"Define an administrative distance\n"
"Administrative distance\n"
"IP source prefix\n"
"Access list name\n")
DEFSH (0, ospf_opaque_capable_cmd_vtysh,
"ospf opaque-lsa",
"OSPF specific commands\n"
"Enable the Opaque-LSA capability (rfc2370)\n")
DEFSH (0, neighbor_update_source_cmd_vtysh,
"neighbor (A.B.C.D|X:X::X:X|WORD) " "update-source " "(A.B.C.D|X:X::X:X|WORD)",
"Specify neighbor router\n"
"Neighbor address\nNeighbor IPv6 address\nNeighbor tag\n"
"Source of routing updates\n"
"IPv4 address\n" "IPv6 address\n" "Interface name (requires zebra to be running)\n")
DEFSH (0|0|0|0, no_ipv6_prefix_list_sequence_number_cmd_vtysh,
"no ipv6 prefix-list sequence-number",
"Negate a command or set its defaults\n"
"IPv6 information\n"
"Build a prefix list\n"
"Include/exclude sequence numbers in NVGEN\n")
DEFSH (0, debug_isis_err_cmd_vtysh,
"debug isis protocol-errors",
"Debugging functions (see also 'undebug')\n"
"IS-IS information\n"
"IS-IS LSP protocol errors\n")
DEFSH (0, no_bgp_redistribute_ipv6_metric_rmap_cmd_vtysh,
"no redistribute " "(kernel|connected|static|ripng|ospf6|isis|babel)" " metric <0-4294967295> route-map WORD",
"Negate a command or set its defaults\n"
"Redistribute information from another routing protocol\n"
"Kernel routes (not installed via the zebra RIB)\n" "Connected routes (directly attached subnet or host)\n" "Statically configured routes\n" "Routing Information Protocol next-generation (IPv6) (RIPng)\n" "Open Shortest Path First (IPv6) (OSPFv3)\n" "Intermediate System to Intermediate System (IS-IS)\n" "Babel routing protocol (Babel)\n"
"Metric for redistributed routes\n"
"Default metric\n"
"Route map reference\n"
"Pointer to route-map entries\n")
DEFSH (0, ipv6_nd_prefix_noval_noauto_cmd_vtysh,
"ipv6 nd prefix X:X::X:X/M (no-autoconfig|)",
"Interface IPv6 config commands\n"
"Neighbor discovery\n"
"Prefix information\n"
"IPv6 prefix\n"
"Do not use prefix for autoconfiguration\n")
DEFSH (0, ipv6_aggregate_address_cmd_vtysh,
"aggregate-address X:X::X:X/M",
"Configure BGP aggregate entries\n"
"Aggregate prefix\n")
DEFSH (0, no_debug_ospf6_message_cmd_vtysh,
"no debug ospf6 message (unknown|hello|dbdesc|lsreq|lsupdate|lsack|all)",
"Negate a command or set its defaults\n"
"Debugging functions (see also 'undebug')\n"
"Open Shortest Path First (OSPF) for IPv6\n"
"Debug OSPFv3 message\n"
"Debug Unknown message\n"
"Debug Hello message\n"
"Debug Database Description message\n"
"Debug Link State Request message\n"
"Debug Link State Update message\n"
"Debug Link State Acknowledgement message\n"
"Debug All message\n"
)
DEFSH (0, no_ospf_auto_cost_reference_bandwidth_cmd_vtysh,
"no auto-cost reference-bandwidth",
"Negate a command or set its defaults\n"
"Calculate OSPF interface cost according to bandwidth\n"
"Use reference bandwidth method to assign OSPF cost\n")
DEFSH (0, clear_ip_bgp_peer_ipv4_soft_out_cmd_vtysh,
"clear ip bgp A.B.C.D ipv4 (unicast|multicast) soft out",
"Reset functions\n"
"IP information\n"
"BGP information\n"
"BGP neighbor address to clear\n"
"Address family\n"
"Address Family modifier\n"
"Address Family modifier\n"
"Soft reconfig\n"
"Soft reconfig outbound update\n")
DEFSH (0, no_ospf_max_metric_router_lsa_startup_cmd_vtysh,
"no max-metric router-lsa on-startup",
"Negate a command or set its defaults\n"
"OSPF maximum / infinite-distance metric\n"
"Advertise own Router-LSA with infinite distance (stub router)\n"
"Automatically advertise stub Router-LSA on startup of OSPF\n")
DEFSH (0, clear_ip_bgp_all_vpnv4_soft_cmd_vtysh,
"clear ip bgp * vpnv4 unicast soft",
"Reset functions\n"
"IP information\n"
"BGP information\n"
"Clear all peers\n"
"Address family\n"
"Address Family Modifier\n"
"Soft reconfig\n")
DEFSH (0, babel_redistribute_type_cmd_vtysh,
"redistribute " "(kernel|connected|static|rip|ripng|ospf|ospf6|isis|bgp)",
"Redistribute\n"
"Kernel routes (not installed via the zebra RIB)\n" "Connected routes (directly attached subnet or host)\n" "Statically configured routes\n" "Routing Information Protocol (RIP)\n" "Routing Information Protocol next-generation (IPv6) (RIPng)\n" "Open Shortest Path First (OSPFv2)\n" "Open Shortest Path First (IPv6) (OSPFv3)\n" "Intermediate System to Intermediate System (IS-IS)\n" "Border Gateway Protocol (BGP)\n")
DEFSH (0, clear_zebra_fpm_stats_cmd_vtysh,
"clear zebra fpm stats",
"Reset functions\n"
"Zebra information\n"
"Clear Forwarding Path Manager information\n"
"Statistics\n")
DEFSH (0, no_neighbor_ebgp_multihop_ttl_cmd_vtysh,
"no neighbor (A.B.C.D|X:X::X:X|WORD) " "ebgp-multihop <1-255>",
"Negate a command or set its defaults\n"
"Specify neighbor router\n"
"Neighbor address\nNeighbor IPv6 address\nNeighbor tag\n"
"Allow EBGP neighbors not on directly connected networks\n"
"maximum hop count\n")
DEFSH (0, debug_ospf6_route_cmd_vtysh,
"debug ospf6 route (table|intra-area|inter-area|memory)",
"Debugging functions (see also 'undebug')\n"
"Open Shortest Path First (OSPF) for IPv6\n"
"Debug route table calculation\n"
"Debug detail\n"
"Debug intra-area route calculation\n"
"Debug inter-area route calculation\n"
"Debug route memory use\n"
)
DEFSH (0, show_ipv6_ospf6_database_id_cmd_vtysh,
"show ipv6 ospf6 database * A.B.C.D",
"Show running system information\n"
"IPv6 information\n"
"Open Shortest Path First (OSPF) for IPv6\n"
"Display Link state database\n"
"Any Link state Type\n"
"Specify Link state ID as IPv4 address notation\n"
)
DEFSH (0, ipv6_ospf6_network_cmd_vtysh,
"ipv6 ospf6 network (broadcast|point-to-point)",
"IPv6 Information\n"
"Open Shortest Path First (OSPF) for IPv6\n"
"Network Type\n"
"Specify OSPFv6 broadcast network\n"
"Specify OSPF6 point-to-point network\n"
)
DEFSH (0, no_neighbor_interface_cmd_vtysh,
"no neighbor (A.B.C.D|X:X::X:X) " "interface WORD",
"Negate a command or set its defaults\n"
"Specify neighbor router\n"
"Neighbor address\nIPv6 address\n"
"Interface\n"
"Interface name\n")
DEFSH (0, no_max_lsp_lifetime_cmd_vtysh,
"no max-lsp-lifetime",
"Negate a command or set its defaults\n"
"LSP lifetime in seconds\n")
DEFSH (0, no_rip_distance_source_access_list_cmd_vtysh,
"no distance <1-255> A.B.C.D/M WORD",
"Negate a command or set its defaults\n"
"Administrative distance\n"
"Distance value\n"
"IP source prefix\n"
"Access list name\n")
DEFSH (0, show_ip_bgp_flap_cidr_only_cmd_vtysh,
"show ip bgp flap-statistics cidr-only",
"Show running system information\n"
"IP information\n"
"BGP information\n"
"Display flap statistics of routes\n"
"Display only routes with non-natural netmasks\n")
DEFSH (0, show_ip_bgp_vpnv4_all_summary_cmd_vtysh,
"show ip bgp vpnv4 all summary",
"Show running system information\n"
"IP information\n"
"BGP information\n"
"Display VPNv4 NLRI specific information\n"
"Display information about all VPNv4 NLRIs\n"
"Summary of BGP neighbor status\n")
DEFSH (0, no_ipv6_address_cmd_vtysh,
"no ipv6 address X:X::X:X/M",
"Negate a command or set its defaults\n"
"Interface IPv6 config commands\n"
"Set the IP address of an interface\n"
"IPv6 address (e.g. 3ffe:506::1/48)\n")
DEFSH (0, clear_bgp_external_soft_cmd_vtysh,
"clear bgp external soft",
"Reset functions\n"
"BGP information\n"
"Clear all external peers\n"
"Soft reconfig\n")
DEFSH (0|0, no_set_tag_cmd_vtysh,
"no set tag",
"Negate a command or set its defaults\n"
"Set values in destination routing protocol\n"
"Tag value for routing protocol\n")
DEFSH (0, ospf_area_vlink_authtype_args_authkey_cmd_vtysh,
"area (A.B.C.D|<0-4294967295>) virtual-link A.B.C.D "
"(authentication|) (message-digest|null) "
"(authentication-key|) AUTH_KEY",
"OSPF area parameters\n" "OSPF area ID in IP address format\n" "OSPF area ID as a decimal value\n" "Configure a virtual link\n" "Router ID of the remote ABR\n"
"Enable authentication on this virtual link\n" "dummy string \n" "Use null authentication\n" "Use message-digest authentication\n"
"Authentication password (key)\n" "The OSPF password (key)")
DEFSH (0, no_neighbor_shutdown_cmd_vtysh,
"no neighbor (A.B.C.D|X:X::X:X|WORD) " "shutdown",
"Negate a command or set its defaults\n"
"Specify neighbor router\n"
"Neighbor address\nNeighbor IPv6 address\nNeighbor tag\n"
"Administratively shut down this neighbor\n")
DEFSH (0, vty_no_restricted_mode_cmd_vtysh,
"no anonymous restricted",
"Negate a command or set its defaults\n"
"Enable password checking\n")
DEFSH (0, show_bgp_prefix_list_cmd_vtysh,
"show bgp prefix-list WORD",
"Show running system information\n"
"BGP information\n"
"Display routes conforming to the prefix-list\n"
"IPv6 prefix-list name\n")
DEFSH (0|0|0|0, show_ipv6_prefix_list_summary_cmd_vtysh,
"show ipv6 prefix-list summary",
"Show running system information\n"
"IPv6 information\n"
"Build a prefix list\n"
"Summary of prefix lists\n")
DEFSH (0, debug_ospf6_flooding_cmd_vtysh,
"debug ospf6 flooding",
"Debugging functions (see also 'undebug')\n"
"Open Shortest Path First (OSPF) for IPv6\n"
"Debug OSPFv3 flooding function\n"
)
DEFSH (0, no_debug_isis_csum_cmd_vtysh,
"no debug isis checksum-errors",
"Disable debugging functions (see also 'debug')\n"
"IS-IS information\n"
"IS-IS LSP checksum errors\n")
DEFSH (0, set_community_none_cmd_vtysh,
"set community none",
"Set values in destination routing protocol\n"
"BGP community attribute\n"
"No community attribute\n")
DEFSH (0, isis_passive_cmd_vtysh,
"isis passive",
"IS-IS commands\n"
"Configure the passive mode for interface\n")
DEFSH (0, neighbor_attr_unchanged6_cmd_vtysh,
"neighbor (A.B.C.D|X:X::X:X|WORD) " "attribute-unchanged as-path med next-hop",
"Specify neighbor router\n"
"Neighbor address\nNeighbor IPv6 address\nNeighbor tag\n"
"BGP attribute is propagated unchanged to this neighbor\n"
"As-path attribute\n"
"Med attribute\n"
"Nexthop attribute\n")
DEFSH (0, ip_rip_receive_version_cmd_vtysh,
"ip rip receive version (1|2)",
"IP information\n"
"Routing Information Protocol\n"
"Advertisement reception\n"
"Version control\n"
"RIP version 1\n"
"RIP version 2\n")
DEFSH (0, ipv6_nd_ra_interval_msec_cmd_vtysh,
"ipv6 nd ra-interval msec <70-1800000>",
"Interface IPv6 config commands\n"
"Neighbor discovery\n"
"Router Advertisement interval\n"
"Router Advertisement interval in milliseconds\n")
DEFSH (0, show_hostname_cmd_vtysh,
"show isis hostname",
"Show running system information\n"
"IS-IS information\n"
"IS-IS Dynamic hostname mapping\n")
DEFSH (0, ip_router_isis_cmd_vtysh,
"ip router isis WORD",
"Interface Internet Protocol config commands\n"
"IP router interface commands\n"
"IS-IS Routing for IP\n"
"Routing process tag\n")
DEFSH (0, no_aggregate_address_as_set_cmd_vtysh,
"no aggregate-address A.B.C.D/M as-set",
"Negate a command or set its defaults\n"
"Configure BGP aggregate entries\n"
"Aggregate prefix\n"
"Generate AS set path information\n")
DEFSH (0, no_linkdetect_cmd_vtysh,
"no link-detect",
"Negate a command or set its defaults\n"
"Disable link detection on interface\n")
DEFSH (0, clear_bgp_ipv6_all_out_cmd_vtysh,
"clear bgp ipv6 * out",
"Reset functions\n"
"BGP information\n"
"Address family\n"
"Clear all peers\n"
"Soft reconfig outbound update\n")
DEFSH (0, show_ipv6_ospf6_database_type_id_router_detail_cmd_vtysh,
"show ipv6 ospf6 database "
"(router|network|inter-prefix|inter-router|as-external|"
"group-membership|type-7|link|intra-prefix) A.B.C.D A.B.C.D "
"(dump|internal)",
"Show running system information\n"
"IPv6 information\n"
"Open Shortest Path First (OSPF) for IPv6\n"
"Display Link state database\n"
"Display Router LSAs\n"
"Display Network LSAs\n"
"Display Inter-Area-Prefix LSAs\n"
"Display Inter-Area-Router LSAs\n"
"Display As-External LSAs\n"
"Display Group-Membership LSAs\n"
"Display Type-7 LSAs\n"
"Display Link LSAs\n"
"Display Intra-Area-Prefix LSAs\n"
"Specify Link state ID as IPv4 address notation\n"
"Specify Advertising Router as IPv4 address notation\n"
"Dump LSAs\n"
"Display LSA's internal information\n"
)
DEFSH (0, show_debugging_ospf_cmd_vtysh,
"show debugging ospf",
"Show running system information\n"
"Debugging functions (see also 'undebug')\n"
"OSPF information\n")
DEFSH (0, no_access_list_all_cmd_vtysh,
"no access-list (<1-99>|<100-199>|<1300-1999>|<2000-2699>|WORD)",
"Negate a command or set its defaults\n"
"Add an access list entry\n"
"IP standard access list\n"
"IP extended access list\n"
"IP standard access list (expanded range)\n"
"IP extended access list (expanded range)\n"
"IP zebra access-list name\n")
DEFSH (0, bgp_config_type_cmd_vtysh,
"bgp config-type (cisco|zebra)",
"BGP information\n"
"Configuration type\n"
"cisco\n"
"zebra\n")
DEFSH (0, if_ipv6_rmap_cmd_vtysh,
"route-map RMAP_NAME (in|out) IFNAME",
"Route map set\n"
"Route map name\n"
"Route map set for input filtering\n"
"Route map set for output filtering\n"
"Route map interface name\n")
DEFSH (0, ospf_area_nssa_cmd_vtysh,
"area (A.B.C.D|<0-4294967295>) nssa",
"OSPF area parameters\n"
"OSPF area ID in IP address format\n"
"OSPF area ID as a decimal value\n"
"Configure OSPF area as nssa\n")
DEFSH (0, show_ip_ospf_neighbor_int_detail_cmd_vtysh,
"show ip ospf neighbor IFNAME detail",
"Show running system information\n"
"IP information\n"
"OSPF information\n"
"Neighbor list\n"
"Interface name\n"
"detail of all neighbors")
DEFSH (0, neighbor_attr_unchanged10_cmd_vtysh,
"neighbor (A.B.C.D|X:X::X:X|WORD) " "attribute-unchanged med as-path next-hop",
"Specify neighbor router\n"
"Neighbor address\nNeighbor IPv6 address\nNeighbor tag\n"
"BGP attribute is propagated unchanged to this neighbor\n"
"Med attribute\n"
"As-path attribute\n"
"Nexthop attribute\n")
DEFSH (0, show_ipv6_ospf6_border_routers_cmd_vtysh,
"show ipv6 ospf6 border-routers",
"Show running system information\n"
"IPv6 Information\n"
"Open Shortest Path First (OSPF) for IPv6\n"
"Display routing table for ABR and ASBR\n"
)
DEFSH (0, no_bgp_network_backdoor_cmd_vtysh,
"no network A.B.C.D/M backdoor",
"Negate a command or set its defaults\n"
"Specify a network to announce via BGP\n"
"IP prefix <network>/<length>, e.g., 35.0.0.0/8\n"
"Specify a BGP backdoor route\n")
DEFSH (0, show_ipv6_ospf6_interface_ifname_prefix_cmd_vtysh,
"show ipv6 ospf6 interface IFNAME prefix",
"Show running system information\n"
"IPv6 Information\n"
"Open Shortest Path First (OSPF) for IPv6\n"
"Interface infomation\n"
"Interface name(e.g. ep0)\n"
"Display connected prefixes to advertise\n"
)
DEFSH (0, debug_isis_rtevents_cmd_vtysh,
"debug isis route-events",
"Debugging functions (see also 'undebug')\n"
"IS-IS information\n"
"IS-IS Route related events\n")
DEFSH (0, no_debug_ripng_events_cmd_vtysh,
"no debug ripng events",
"Negate a command or set its defaults\n"
"Debugging functions (see also 'undebug')\n"
"RIPng configuration\n"
"Debug option set for ripng events\n")
DEFSH (0, set_overload_bit_cmd_vtysh,
"set-overload-bit",
"Set overload bit to avoid any transit traffic\n"
"Set overload bit\n")
| 