# aclocal.m4 generated automatically by aclocal 1.5

# Copyright 1996, 1997, 1998, 1999, 2000, 2001
# Free Software Foundation, Inc.
# This file is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

# Do all the work for Automake.  This macro actually does too much --
# some checks are only needed if your package does certain things.
# But this isn't really a big deal.

# serial 5

# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery.  Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...


# We require 2.13 because we rely on SHELL being computed by configure.
AC_PREREQ([2.13])

# AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED)
# -----------------------------------------------------------
# If MACRO-NAME is provided do IF-PROVIDED, else IF-NOT-PROVIDED.
# The purpose of this macro is to provide the user with a means to
# check macros which are provided without letting her know how the
# information is coded.
# If this macro is not defined by Autoconf, define it here.
ifdef([AC_PROVIDE_IFELSE],
      [],
      [define([AC_PROVIDE_IFELSE],
              [ifdef([AC_PROVIDE_$1],
                     [$2], [$3])])])


# AM_INIT_AUTOMAKE(PACKAGE,VERSION, [NO-DEFINE])
# ----------------------------------------------
AC_DEFUN([AM_INIT_AUTOMAKE],
[AC_REQUIRE([AC_PROG_INSTALL])dnl
# test to see if srcdir already configured
if test "`CDPATH=:; cd $srcdir && pwd`" != "`pwd`" &&
   test -f $srcdir/config.status; then
  AC_MSG_ERROR([source directory already configured; run \"make distclean\" there first])
fi

# Define the identity of the package.
PACKAGE=$1
AC_SUBST(PACKAGE)dnl
VERSION=$2
AC_SUBST(VERSION)dnl
ifelse([$3],,
[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])

# Autoconf 2.50 wants to disallow AM_ names.  We explicitly allow
# the ones we care about.
ifdef([m4_pattern_allow],
      [m4_pattern_allow([^AM_[A-Z]+FLAGS])])dnl

# Autoconf 2.50 always computes EXEEXT.  However we need to be
# compatible with 2.13, for now.  So we always define EXEEXT, but we
# don't compute it.
AC_SUBST(EXEEXT)
# Similar for OBJEXT -- only we only use OBJEXT if the user actually
# requests that it be used.  This is a bit dumb.
: ${OBJEXT=o}
AC_SUBST(OBJEXT)

# Some tools Automake needs.
AC_REQUIRE([AM_SANITY_CHECK])dnl
AC_REQUIRE([AC_ARG_PROGRAM])dnl
AM_MISSING_PROG(ACLOCAL, aclocal)
AM_MISSING_PROG(AUTOCONF, autoconf)
AM_MISSING_PROG(AUTOMAKE, automake)
AM_MISSING_PROG(AUTOHEADER, autoheader)
AM_MISSING_PROG(MAKEINFO, makeinfo)
AM_MISSING_PROG(AMTAR, tar)
AM_PROG_INSTALL_SH
AM_PROG_INSTALL_STRIP
# We need awk for the "check" target.  The system "awk" is bad on
# some platforms.
AC_REQUIRE([AC_PROG_AWK])dnl
AC_REQUIRE([AC_PROG_MAKE_SET])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl
AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_PROVIDE_IFELSE([AC_PROG_][CC],
                  [_AM_DEPENDENCIES(CC)],
                  [define([AC_PROG_][CC],
                          defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl
AC_PROVIDE_IFELSE([AC_PROG_][CXX],
                  [_AM_DEPENDENCIES(CXX)],
                  [define([AC_PROG_][CXX],
                          defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl
])

#
# Check to make sure that the build environment is sane.
#

# serial 3

# AM_SANITY_CHECK
# ---------------
AC_DEFUN([AM_SANITY_CHECK],
[AC_MSG_CHECKING([whether build environment is sane])
# Just in case
sleep 1
echo timestamp > conftest.file
# Do `set' in a subshell so we don't clobber the current shell's
# arguments.  Must try -L first in case configure is actually a
# symlink; some systems play weird games with the mod time of symlinks
# (eg FreeBSD returns the mod time of the symlink's containing
# directory).
if (
   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
   if test "$[*]" = "X"; then
      # -L didn't work.
      set X `ls -t $srcdir/configure conftest.file`
   fi
   rm -f conftest.file
   if test "$[*]" != "X $srcdir/configure conftest.file" \
      && test "$[*]" != "X conftest.file $srcdir/configure"; then

      # If neither matched, then we have a broken ls.  This can happen
      # if, for instance, CONFIG_SHELL is bash and it inherits a
      # broken ls alias from the environment.  This has actually
      # happened.  Such a system could not be considered "sane".
      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
alias in your environment])
   fi

   test "$[2]" = conftest.file
   )
then
   # Ok.
   :
else
   AC_MSG_ERROR([newly created file is older than distributed files!
Check your system clock])
fi
AC_MSG_RESULT(yes)])


# serial 2

# AM_MISSING_PROG(NAME, PROGRAM)
# ------------------------------
AC_DEFUN([AM_MISSING_PROG],
[AC_REQUIRE([AM_MISSING_HAS_RUN])
$1=${$1-"${am_missing_run}$2"}
AC_SUBST($1)])


# AM_MISSING_HAS_RUN
# ------------------
# Define MISSING if not defined so far and test if it supports --run.
# If it does, set am_missing_run to use it, otherwise, to nothing.
AC_DEFUN([AM_MISSING_HAS_RUN],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
# Use eval to expand $SHELL
if eval "$MISSING --run true"; then
  am_missing_run="$MISSING --run "
else
  am_missing_run=
  am_backtick='`'
  AC_MSG_WARN([${am_backtick}missing' script is too old or missing])
fi
])

# AM_AUX_DIR_EXPAND

# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
#
# Of course, Automake must honor this variable whenever it calls a
# tool from the auxiliary directory.  The problem is that $srcdir (and
# therefore $ac_aux_dir as well) can be either absolute or relative,
# depending on how configure is run.  This is pretty annoying, since
# it makes $ac_aux_dir quite unusable in subdirectories: in the top
# source directory, any form will work fine, but in subdirectories a
# relative path needs to be adjusted first.
#
# $ac_aux_dir/missing
#    fails when called from a subdirectory if $ac_aux_dir is relative
# $top_srcdir/$ac_aux_dir/missing
#    fails if $ac_aux_dir is absolute,
#    fails when called from a subdirectory in a VPATH build with
#          a relative $ac_aux_dir
#
# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
# are both prefixed by $srcdir.  In an in-source build this is usually
# harmless because $srcdir is `.', but things will broke when you
# start a VPATH build or use an absolute $srcdir.
#
# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
# and then we would define $MISSING as
#   MISSING="\${SHELL} $am_aux_dir/missing"
# This will work as long as MISSING is not called from configure, because
# unfortunately $(top_srcdir) has no meaning in configure.
# However there are other variables, like CC, which are often used in
# configure, and could therefore not use this "fixed" $ac_aux_dir.
#
# Another solution, used here, is to always expand $ac_aux_dir to an
# absolute PATH.  The drawback is that using absolute paths prevent a
# configured tree to be moved without reconfiguration.

AC_DEFUN([AM_AUX_DIR_EXPAND], [
# expand $ac_aux_dir to an absolute path
am_aux_dir=`CDPATH=:; cd $ac_aux_dir && pwd`
])

# AM_PROG_INSTALL_SH
# ------------------
# Define $install_sh.
AC_DEFUN([AM_PROG_INSTALL_SH],
[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
install_sh=${install_sh-"$am_aux_dir/install-sh"}
AC_SUBST(install_sh)])

# One issue with vendor `install' (even GNU) is that you can't
# specify the program used to strip binaries.  This is especially
# annoying in cross-compiling environments, where the build's strip
# is unlikely to handle the host's binaries.
# Fortunately install-sh will honor a STRIPPROG variable, so we
# always use install-sh in `make install-strip', and initialize
# STRIPPROG with the value of the STRIP variable (set by the user).
AC_DEFUN([AM_PROG_INSTALL_STRIP],
[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
AC_SUBST([INSTALL_STRIP_PROGRAM])])

# serial 4						-*- Autoconf -*-



# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be
# written in clear, in which case automake, when reading aclocal.m4,
# will think it sees a *use*, and therefore will trigger all it's
# C support machinery.  Also note that it means that autoscan, seeing
# CC etc. in the Makefile, will ask for an AC_PROG_CC use...



# _AM_DEPENDENCIES(NAME)
# ---------------------
# See how the compiler implements dependency checking.
# NAME is "CC", "CXX" or "OBJC".
# We try a few techniques and use that to set a single cache variable.
#
# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
# dependency, and given that the user is not expected to run this macro,
# just rely on AC_PROG_CC.
AC_DEFUN([_AM_DEPENDENCIES],
[AC_REQUIRE([AM_SET_DEPDIR])dnl
AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
AC_REQUIRE([AM_MAKE_INCLUDE])dnl
AC_REQUIRE([AM_DEP_TRACK])dnl

ifelse([$1], CC,   [depcc="$CC"   am_compiler_list=],
       [$1], CXX,  [depcc="$CXX"  am_compiler_list=],
       [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc']
       [$1], GCJ,  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
                   [depcc="$$1"   am_compiler_list=])

AC_CACHE_CHECK([dependency style of $depcc],
               [am_cv_$1_dependencies_compiler_type],
[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
  # We make a subdir and do the tests there.  Otherwise we can end up
  # making bogus files that we don't know about and never remove.  For
  # instance it was reported that on HP-UX the gcc test will end up
  # making a dummy file named `D' -- because `-MD' means `put the output
  # in D'.
  mkdir conftest.dir
  # Copy depcomp to subdir because otherwise we won't find it if we're
  # using a relative directory.
  cp "$am_depcomp" conftest.dir
  cd conftest.dir

  am_cv_$1_dependencies_compiler_type=none
  if test "$am_compiler_list" = ""; then
     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
  fi
  for depmode in $am_compiler_list; do
    # We need to recreate these files for each test, as the compiler may
    # overwrite some of them when testing with obscure command lines.
    # This happens at least with the AIX C compiler.
    echo '#include "conftest.h"' > conftest.c
    echo 'int i;' > conftest.h
    echo "${am__include} ${am__quote}conftest.Po${am__quote}" > confmf

    case $depmode in
    nosideeffect)
      # after this tag, mechanisms are not by side-effect, so they'll
      # only be used when explicitly requested
      if test "x$enable_dependency_tracking" = xyes; then
	continue
      else
	break
      fi
      ;;
    none) break ;;
    esac
    # We check with `-c' and `-o' for the sake of the "dashmstdout"
    # mode.  It turns out that the SunPro C++ compiler does not properly
    # handle `-M -o', and we need to detect this.
    if depmode=$depmode \
       source=conftest.c object=conftest.o \
       depfile=conftest.Po tmpdepfile=conftest.TPo \
       $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 &&
       grep conftest.h conftest.Po > /dev/null 2>&1 &&
       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
      am_cv_$1_dependencies_compiler_type=$depmode
      break
    fi
  done

  cd ..
  rm -rf conftest.dir
else
  am_cv_$1_dependencies_compiler_type=none
fi
])
$1DEPMODE="depmode=$am_cv_$1_dependencies_compiler_type"
AC_SUBST([$1DEPMODE])
])


# AM_SET_DEPDIR
# -------------
# Choose a directory name for dependency files.
# This macro is AC_REQUIREd in _AM_DEPENDENCIES
AC_DEFUN([AM_SET_DEPDIR],
[rm -f .deps 2>/dev/null
mkdir .deps 2>/dev/null
if test -d .deps; then
  DEPDIR=.deps
else
  # MS-DOS does not allow filenames that begin with a dot.
  DEPDIR=_deps
fi
rmdir .deps 2>/dev/null
AC_SUBST(DEPDIR)
])


# AM_DEP_TRACK
# ------------
AC_DEFUN([AM_DEP_TRACK],
[AC_ARG_ENABLE(dependency-tracking,
[  --disable-dependency-tracking Speeds up one-time builds
  --enable-dependency-tracking  Do not reject slow dependency extractors])
if test "x$enable_dependency_tracking" != xno; then
  am_depcomp="$ac_aux_dir/depcomp"
  AMDEPBACKSLASH='\'
fi
AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
pushdef([subst], defn([AC_SUBST]))
subst(AMDEPBACKSLASH)
popdef([subst])
])

# Generate code to set up dependency tracking.
# This macro should only be invoked once -- use via AC_REQUIRE.
# Usage:
# AM_OUTPUT_DEPENDENCY_COMMANDS

#
# This code is only required when automatic dependency tracking
# is enabled.  FIXME.  This creates each `.P' file that we will
# need in order to bootstrap the dependency handling code.
AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],[
AC_OUTPUT_COMMANDS([
test x"$AMDEP_TRUE" != x"" ||
for mf in $CONFIG_FILES; do
  case "$mf" in
  Makefile) dirpart=.;;
  */Makefile) dirpart=`echo "$mf" | sed -e 's|/[^/]*$||'`;;
  *) continue;;
  esac
  grep '^DEP_FILES *= *[^ #]' < "$mf" > /dev/null || continue
  # Extract the definition of DEP_FILES from the Makefile without
  # running `make'.
  DEPDIR=`sed -n -e '/^DEPDIR = / s///p' < "$mf"`
  test -z "$DEPDIR" && continue
  # When using ansi2knr, U may be empty or an underscore; expand it
  U=`sed -n -e '/^U = / s///p' < "$mf"`
  test -d "$dirpart/$DEPDIR" || mkdir "$dirpart/$DEPDIR"
  # We invoke sed twice because it is the simplest approach to
  # changing $(DEPDIR) to its actual value in the expansion.
  for file in `sed -n -e '
    /^DEP_FILES = .*\\\\$/ {
      s/^DEP_FILES = //
      :loop
	s/\\\\$//
	p
	n
	/\\\\$/ b loop
      p
    }
    /^DEP_FILES = / s/^DEP_FILES = //p' < "$mf" | \
       sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do
    # Make sure the directory exists.
    test -f "$dirpart/$file" && continue
    fdir=`echo "$file" | sed -e 's|/[^/]*$||'`
    $ac_aux_dir/mkinstalldirs "$dirpart/$fdir" > /dev/null 2>&1
    # echo "creating $dirpart/$file"
    echo '# dummy' > "$dirpart/$file"
  done
done
], [AMDEP_TRUE="$AMDEP_TRUE"
ac_aux_dir="$ac_aux_dir"])])

# AM_MAKE_INCLUDE()
# -----------------
# Check to see how make treats includes.
AC_DEFUN([AM_MAKE_INCLUDE],
[am_make=${MAKE-make}
cat > confinc << 'END'
doit:
	@echo done
END
# If we don't find an include directive, just comment out the code.
AC_MSG_CHECKING([for style of include used by $am_make])
am__include='#'
am__quote=
_am_result=none
# First try GNU make style include.
echo "include confinc" > confmf
# We grep out `Entering directory' and `Leaving directory'
# messages which can occur if `w' ends up in MAKEFLAGS.
# In particular we don't look at `^make:' because GNU make might
# be invoked under some other name (usually "gmake"), in which
# case it prints its new name instead of `make'.
if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then
   am__include=include
   am__quote=
   _am_result=GNU
fi
# Now try BSD make style include.
if test "$am__include" = "#"; then
   echo '.include "confinc"' > confmf
   if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then
      am__include=.include
      am__quote='"'
      _am_result=BSD
   fi
fi
AC_SUBST(am__include)
AC_SUBST(am__quote)
AC_MSG_RESULT($_am_result)
rm -f confinc confmf
])

# serial 3

# AM_CONDITIONAL(NAME, SHELL-CONDITION)
# -------------------------------------
# Define a conditional.
#
# FIXME: Once using 2.50, use this:
# m4_match([$1], [^TRUE\|FALSE$], [AC_FATAL([$0: invalid condition: $1])])dnl
AC_DEFUN([AM_CONDITIONAL],
[ifelse([$1], [TRUE],
        [errprint(__file__:__line__: [$0: invalid condition: $1
])dnl
m4exit(1)])dnl
ifelse([$1], [FALSE],
       [errprint(__file__:__line__: [$0: invalid condition: $1
])dnl
m4exit(1)])dnl
AC_SUBST([$1_TRUE])
AC_SUBST([$1_FALSE])
if $2; then
  $1_TRUE=
  $1_FALSE='#'
else
  $1_TRUE='#'
  $1_FALSE=
fi])

# Like AC_CONFIG_HEADER, but automatically create stamp file.

# serial 3

# When config.status generates a header, we must update the stamp-h file.
# This file resides in the same directory as the config header
# that is generated.  We must strip everything past the first ":",
# and everything past the last "/".

AC_PREREQ([2.12])

AC_DEFUN([AM_CONFIG_HEADER],
[ifdef([AC_FOREACH],dnl
	 [dnl init our file count if it isn't already
	 m4_ifndef([_AM_Config_Header_Index], m4_define([_AM_Config_Header_Index], [0]))
	 dnl prepare to store our destination file list for use in config.status
	 AC_FOREACH([_AM_File], [$1],
		    [m4_pushdef([_AM_Dest], m4_patsubst(_AM_File, [:.*]))
		    m4_define([_AM_Config_Header_Index], m4_incr(_AM_Config_Header_Index))
		    dnl and add it to the list of files AC keeps track of, along
		    dnl with our hook
		    AC_CONFIG_HEADERS(_AM_File,
dnl COMMANDS, [, INIT-CMDS]
[# update the timestamp
echo timestamp >"AS_ESCAPE(_AM_DIRNAME(]_AM_Dest[))/stamp-h]_AM_Config_Header_Index["
][$2]m4_ifval([$3], [, [$3]]))dnl AC_CONFIG_HEADERS
		    m4_popdef([_AM_Dest])])],dnl
[AC_CONFIG_HEADER([$1])
  AC_OUTPUT_COMMANDS(
   ifelse(patsubst([$1], [[^ ]], []),
	  [],
	  [test -z "$CONFIG_HEADERS" || echo timestamp >dnl
	   patsubst([$1], [^\([^:]*/\)?.*], [\1])stamp-h]),dnl
[am_indx=1
for am_file in $1; do
  case " \$CONFIG_HEADERS " in
  *" \$am_file "*)
    am_dir=\`echo \$am_file |sed 's%:.*%%;s%[^/]*\$%%'\`
    if test -n "\$am_dir"; then
      am_tmpdir=\`echo \$am_dir |sed 's%^\(/*\).*\$%\1%'\`
      for am_subdir in \`echo \$am_dir |sed 's%/% %'\`; do
        am_tmpdir=\$am_tmpdir\$am_subdir/
        if test ! -d \$am_tmpdir; then
          mkdir \$am_tmpdir
        fi
      done
    fi
    echo timestamp > "\$am_dir"stamp-h\$am_indx
    ;;
  esac
  am_indx=\`expr \$am_indx + 1\`
done])
])]) # AM_CONFIG_HEADER

# _AM_DIRNAME(PATH)
# -----------------
# Like AS_DIRNAME, only do it during macro expansion
AC_DEFUN([_AM_DIRNAME],
       [m4_if(m4_regexp([$1], [^.*[^/]//*[^/][^/]*/*$]), -1,
	      m4_if(m4_regexp([$1], [^//\([^/]\|$\)]), -1,
		    m4_if(m4_regexp([$1], [^/.*]), -1,
			  [.],
			  m4_patsubst([$1], [^\(/\).*], [\1])),
		    m4_patsubst([$1], [^\(//\)\([^/].*\|$\)], [\1])),
	      m4_patsubst([$1], [^\(.*[^/]\)//*[^/][^/]*/*$], [\1]))[]dnl
]) # _AM_DIRNAME

#serial 1
# This test replaces the one in autoconf.
# Currently this macro should have the same name as the autoconf macro
# because gettext's gettext.m4 (distributed in the automake package)
# still uses it.  Otherwise, the use in gettext.m4 makes autoheader
# give these diagnostics:
#   configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX
#   configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX

undefine([AC_ISC_POSIX])

AC_DEFUN([AC_ISC_POSIX],
  [
    dnl This test replaces the obsolescent AC_ISC_POSIX kludge.
    AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"])
  ]
)

# Configure paths for GLIB
# Owen Taylor     97-11-3

dnl AM_PATH_GLIB([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
dnl Test for GLIB, and define GLIB_CFLAGS and GLIB_LIBS, if "gmodule" or 
dnl gthread is specified in MODULES, pass to glib-config
dnl
AC_DEFUN(AM_PATH_GLIB,
[dnl 
dnl Get the cflags and libraries from the glib-config script
dnl
AC_ARG_WITH(glib-prefix,[  --with-glib-prefix=PFX   Prefix where GLIB is installed (optional)],
            glib_config_prefix="$withval", glib_config_prefix="")
AC_ARG_WITH(glib-exec-prefix,[  --with-glib-exec-prefix=PFX Exec prefix where GLIB is installed (optional)],
            glib_config_exec_prefix="$withval", glib_config_exec_prefix="")
AC_ARG_ENABLE(glibtest, [  --disable-glibtest       Do not try to compile and run a test GLIB program],
		    , enable_glibtest=yes)

  if test x$glib_config_exec_prefix != x ; then
     glib_config_args="$glib_config_args --exec-prefix=$glib_config_exec_prefix"
     if test x${GLIB_CONFIG+set} != xset ; then
        GLIB_CONFIG=$glib_config_exec_prefix/bin/glib-config
     fi
  fi
  if test x$glib_config_prefix != x ; then
     glib_config_args="$glib_config_args --prefix=$glib_config_prefix"
     if test x${GLIB_CONFIG+set} != xset ; then
        GLIB_CONFIG=$glib_config_prefix/bin/glib-config
     fi
  fi

  for module in . $4
  do
      case "$module" in
         gmodule) 
             glib_config_args="$glib_config_args gmodule"
         ;;
         gthread) 
             glib_config_args="$glib_config_args gthread"
         ;;
      esac
  done

  AC_PATH_PROG(GLIB_CONFIG, glib-config, no)
  min_glib_version=ifelse([$1], ,0.99.7,$1)
  AC_MSG_CHECKING(for GLIB - version >= $min_glib_version)
  no_glib=""
  if test "$GLIB_CONFIG" = "no" ; then
    no_glib=yes
  else
    GLIB_CFLAGS=`$GLIB_CONFIG $glib_config_args --cflags`
    GLIB_LIBS=`$GLIB_CONFIG $glib_config_args --libs`
    glib_config_major_version=`$GLIB_CONFIG $glib_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    glib_config_minor_version=`$GLIB_CONFIG $glib_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    glib_config_micro_version=`$GLIB_CONFIG $glib_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_glibtest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GLIB_CFLAGS"
      LIBS="$GLIB_LIBS $LIBS"
dnl
dnl Now check if the installed GLIB is sufficiently new. (Also sanity
dnl checks the results of glib-config to some extent
dnl
      rm -f conf.glibtest
      AC_TRY_RUN([
#include <glib.h>
#include <stdio.h>
#include <stdlib.h>

int 
main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.glibtest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_glib_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_glib_version");
     exit(1);
   }

  if ((glib_major_version != $glib_config_major_version) ||
      (glib_minor_version != $glib_config_minor_version) ||
      (glib_micro_version != $glib_config_micro_version))
    {
      printf("\n*** 'glib-config --version' returned %d.%d.%d, but GLIB (%d.%d.%d)\n", 
             $glib_config_major_version, $glib_config_minor_version, $glib_config_micro_version,
             glib_major_version, glib_minor_version, glib_micro_version);
      printf ("*** was found! If glib-config was correct, then it is best\n");
      printf ("*** to remove the old version of GLIB. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If glib-config was wrong, set the environment variable GLIB_CONFIG\n");
      printf("*** to point to the correct copy of glib-config, and remove the file config.cache\n");
      printf("*** before re-running configure\n");
    } 
  else if ((glib_major_version != GLIB_MAJOR_VERSION) ||
	   (glib_minor_version != GLIB_MINOR_VERSION) ||
           (glib_micro_version != GLIB_MICRO_VERSION))
    {
      printf("*** GLIB header files (version %d.%d.%d) do not match\n",
	     GLIB_MAJOR_VERSION, GLIB_MINOR_VERSION, GLIB_MICRO_VERSION);
      printf("*** library (version %d.%d.%d)\n",
	     glib_major_version, glib_minor_version, glib_micro_version);
    }
  else
    {
      if ((glib_major_version > major) ||
        ((glib_major_version == major) && (glib_minor_version > minor)) ||
        ((glib_major_version == major) && (glib_minor_version == minor) && (glib_micro_version >= micro)))
      {
        return 0;
       }
     else
      {
        printf("\n*** An old version of GLIB (%d.%d.%d) was found.\n",
               glib_major_version, glib_minor_version, glib_micro_version);
        printf("*** You need a version of GLIB newer than %d.%d.%d. The latest version of\n",
	       major, minor, micro);
        printf("*** GLIB is always available from ftp://ftp.gtk.org.\n");
        printf("***\n");
        printf("*** If you have already installed a sufficiently new version, this error\n");
        printf("*** probably means that the wrong copy of the glib-config shell script is\n");
        printf("*** being found. The easiest way to fix this is to remove the old version\n");
        printf("*** of GLIB, but you can also set the GLIB_CONFIG environment to point to the\n");
        printf("*** correct copy of glib-config. (In this case, you will have to\n");
        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
        printf("*** so that the correct libraries are found at run-time))\n");
      }
    }
  return 1;
}
],, no_glib=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_glib" = x ; then
     AC_MSG_RESULT(yes)
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$GLIB_CONFIG" = "no" ; then
       echo "*** The glib-config script installed by GLIB could not be found"
       echo "*** If GLIB was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the GLIB_CONFIG environment variable to the"
       echo "*** full path to glib-config."
     else
       if test -f conf.glibtest ; then
        :
       else
          echo "*** Could not run GLIB test program, checking why..."
          CFLAGS="$CFLAGS $GLIB_CFLAGS"
          LIBS="$LIBS $GLIB_LIBS"
          AC_TRY_LINK([
#include <glib.h>
#include <stdio.h>
],      [ return ((glib_major_version) || (glib_minor_version) || (glib_micro_version)); ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GLIB or finding the wrong"
          echo "*** version of GLIB. If it is not finding GLIB, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
          echo "***"
          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
          echo "*** came with the system with the command"
          echo "***"
          echo "***    rpm --erase --nodeps gtk gtk-devel" ],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means GLIB was incorrectly installed"
          echo "*** or that you have moved GLIB since it was installed. In the latter case, you"
          echo "*** may want to edit the glib-config script: $GLIB_CONFIG" ])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GLIB_CFLAGS=""
     GLIB_LIBS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(GLIB_CFLAGS)
  AC_SUBST(GLIB_LIBS)
  rm -f conf.glibtest
])

# Configure paths for GTK+
# Owen Taylor     97-11-3

dnl AM_PATH_GTK([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
dnl Test for GTK, and define GTK_CFLAGS and GTK_LIBS
dnl
AC_DEFUN(AM_PATH_GTK,
[dnl 
dnl Get the cflags and libraries from the gtk-config script
dnl
AC_ARG_WITH(gtk-prefix,[  --with-gtk-prefix=PFX   Prefix where GTK is installed (optional)],
            gtk_config_prefix="$withval", gtk_config_prefix="")
AC_ARG_WITH(gtk-exec-prefix,[  --with-gtk-exec-prefix=PFX Exec prefix where GTK is installed (optional)],
            gtk_config_exec_prefix="$withval", gtk_config_exec_prefix="")
AC_ARG_ENABLE(gtktest, [  --disable-gtktest       Do not try to compile and run a test GTK program],
		    , enable_gtktest=yes)

  for module in . $4
  do
      case "$module" in
         gthread) 
             gtk_config_args="$gtk_config_args gthread"
         ;;
      esac
  done

  if test x$gtk_config_exec_prefix != x ; then
     gtk_config_args="$gtk_config_args --exec-prefix=$gtk_config_exec_prefix"
     if test x${GTK_CONFIG+set} != xset ; then
        GTK_CONFIG=$gtk_config_exec_prefix/bin/gtk-config
     fi
  fi
  if test x$gtk_config_prefix != x ; then
     gtk_config_args="$gtk_config_args --prefix=$gtk_config_prefix"
     if test x${GTK_CONFIG+set} != xset ; then
        GTK_CONFIG=$gtk_config_prefix/bin/gtk-config
     fi
  fi

  AC_PATH_PROG(GTK_CONFIG, gtk-config, no)
  min_gtk_version=ifelse([$1], ,0.99.7,$1)
  AC_MSG_CHECKING(for GTK - version >= $min_gtk_version)
  no_gtk=""
  if test "$GTK_CONFIG" = "no" ; then
    no_gtk=yes
  else
    GTK_CFLAGS=`$GTK_CONFIG $gtk_config_args --cflags`
    GTK_LIBS=`$GTK_CONFIG $gtk_config_args --libs`
    gtk_config_major_version=`$GTK_CONFIG $gtk_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    gtk_config_minor_version=`$GTK_CONFIG $gtk_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    gtk_config_micro_version=`$GTK_CONFIG $gtk_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_gtktest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GTK_CFLAGS"
      LIBS="$GTK_LIBS $LIBS"
dnl
dnl Now check if the installed GTK is sufficiently new. (Also sanity
dnl checks the results of gtk-config to some extent
dnl
      rm -f conf.gtktest
      AC_TRY_RUN([
#include <gtk/gtk.h>
#include <stdio.h>
#include <stdlib.h>

int 
main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.gtktest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_gtk_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_gtk_version");
     exit(1);
   }

  if ((gtk_major_version != $gtk_config_major_version) ||
      (gtk_minor_version != $gtk_config_minor_version) ||
      (gtk_micro_version != $gtk_config_micro_version))
    {
      printf("\n*** 'gtk-config --version' returned %d.%d.%d, but GTK+ (%d.%d.%d)\n", 
             $gtk_config_major_version, $gtk_config_minor_version, $gtk_config_micro_version,
             gtk_major_version, gtk_minor_version, gtk_micro_version);
      printf ("*** was found! If gtk-config was correct, then it is best\n");
      printf ("*** to remove the old version of GTK+. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If gtk-config was wrong, set the environment variable GTK_CONFIG\n");
      printf("*** to point to the correct copy of gtk-config, and remove the file config.cache\n");
      printf("*** before re-running configure\n");
    } 
#if defined (GTK_MAJOR_VERSION) && defined (GTK_MINOR_VERSION) && defined (GTK_MICRO_VERSION)
  else if ((gtk_major_version != GTK_MAJOR_VERSION) ||
	   (gtk_minor_version != GTK_MINOR_VERSION) ||
           (gtk_micro_version != GTK_MICRO_VERSION))
    {
      printf("*** GTK+ header files (version %d.%d.%d) do not match\n",
	     GTK_MAJOR_VERSION, GTK_MINOR_VERSION, GTK_MICRO_VERSION);
      printf("*** library (version %d.%d.%d)\n",
	     gtk_major_version, gtk_minor_version, gtk_micro_version);
    }
#endif /* defined (GTK_MAJOR_VERSION) ... */
  else
    {
      if ((gtk_major_version > major) ||
        ((gtk_major_version == major) && (gtk_minor_version > minor)) ||
        ((gtk_major_version == major) && (gtk_minor_version == minor) && (gtk_micro_version >= micro)))
      {
        return 0;
       }
     else
      {
        printf("\n*** An old version of GTK+ (%d.%d.%d) was found.\n",
               gtk_major_version, gtk_minor_version, gtk_micro_version);
        printf("*** You need a version of GTK+ newer than %d.%d.%d. The latest version of\n",
	       major, minor, micro);
        printf("*** GTK+ is always available from ftp://ftp.gtk.org.\n");
        printf("***\n");
        printf("*** If you have already installed a sufficiently new version, this error\n");
        printf("*** probably means that the wrong copy of the gtk-config shell script is\n");
        printf("*** being found. The easiest way to fix this is to remove the old version\n");
        printf("*** of GTK+, but you can also set the GTK_CONFIG environment to point to the\n");
        printf("*** correct copy of gtk-config. (In this case, you will have to\n");
        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
        printf("*** so that the correct libraries are found at run-time))\n");
      }
    }
  return 1;
}
],, no_gtk=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_gtk" = x ; then
     AC_MSG_RESULT(yes)
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$GTK_CONFIG" = "no" ; then
       echo "*** The gtk-config script installed by GTK could not be found"
       echo "*** If GTK was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the GTK_CONFIG environment variable to the"
       echo "*** full path to gtk-config."
     else
       if test -f conf.gtktest ; then
        :
       else
          echo "*** Could not run GTK test program, checking why..."
          CFLAGS="$CFLAGS $GTK_CFLAGS"
          LIBS="$LIBS $GTK_LIBS"
          AC_TRY_LINK([
#include <gtk/gtk.h>
#include <stdio.h>
],      [ return ((gtk_major_version) || (gtk_minor_version) || (gtk_micro_version)); ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GTK or finding the wrong"
          echo "*** version of GTK. If it is not finding GTK, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
          echo "***"
          echo "*** If you have a RedHat 5.0 system, you should remove the GTK package that"
          echo "*** came with the system with the command"
          echo "***"
          echo "***    rpm --erase --nodeps gtk gtk-devel" ],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means GTK was incorrectly installed"
          echo "*** or that you have moved GTK since it was installed. In the latter case, you"
          echo "*** may want to edit the gtk-config script: $GTK_CONFIG" ])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GTK_CFLAGS=""
     GTK_LIBS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(GTK_CFLAGS)
  AC_SUBST(GTK_LIBS)
  rm -f conf.gtktest
])

# Configure paths for GTK+EXTRA
# Owen Taylor     97-11-3
# Adrian Feiguin  01-04-03 

dnl AM_PATH_GTK_EXTRA([MINIMUM-VERSION, [ACTION-IF-FOUND [, ACTION-IF-NOT-FOUND [, MODULES]]]])
dnl Test for GTK_EXTRA, and define GTK_EXTRA_CFLAGS and GTK_EXTRA_LIBS
dnl
AC_DEFUN(AM_PATH_GTK_EXTRA,
[dnl 
dnl Get the cflags and libraries from the gtkextra-config script
dnl
AC_ARG_WITH(gtkextra-prefix,[  --with-gtkextra-prefix=PFX   Prefix where GTK_EXTRA is installed (optional)],
            gtkextra_config_prefix="$withval", gtkextra_config_prefix="")
AC_ARG_WITH(gtkextra-exec-prefix,[  --with-gtkextra-exec-prefix=PFX Exec prefix where GTK_EXTRA is installed (optional)],
            gtkextra_config_exec_prefix="$withval", gtkextra_config_exec_prefix="")
AC_ARG_ENABLE(gtkextratest, [  --disable-gtkextratest       Do not try to compile and run a test GTK_EXTRA program],
		    , enable_gtkextratest=yes)

  for module in . $4
  do
      case "$module" in
         gthread) 
             gtkextra_config_args="$gtkextra_config_args gthread"
         ;;
      esac
  done

  if test x$gtkextra_config_exec_prefix != x ; then
     gtkextra_config_args="$gtkextra_config_args --exec-prefix=$gtkextra_config_exec_prefix"
     if test x${GTK_EXTRA_CONFIG+set} != xset ; then
        GTK_EXTRA_CONFIG=$gtkextra_config_exec_prefix/bin/gtkextra-config
     fi
  fi
  if test x$gtkextra_config_prefix != x ; then
     gtkextra_config_args="$gtkextra_config_args --prefix=$gtkextra_config_prefix"
     if test x${GTK_EXTRA_CONFIG+set} != xset ; then
        GTK_EXTRA_CONFIG=$gtkextra_config_prefix/bin/gtkextra-config
     fi
  fi

  AC_PATH_PROG(GTK_EXTRA_CONFIG, gtkextra-config, no)
  min_gtkextra_version=ifelse([$1], ,0.99.13,$1)
  AC_MSG_CHECKING(for GTK_EXTRA - version >= $min_gtkextra_version)
  no_gtkextra=""
  if test "$GTK_EXTRA_CONFIG" = "no" ; then
    no_gtkextra=yes
  else
    GTK_EXTRA_CFLAGS=`$GTK_EXTRA_CONFIG $gtkextra_config_args --cflags`
    GTK_EXTRA_LIBS=`$GTK_EXTRA_CONFIG $gtkextra_config_args --libs`
    gtkextra_config_major_version=`$GTK_EXTRA_CONFIG $gtkextra_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\1/'`
    gtkextra_config_minor_version=`$GTK_EXTRA_CONFIG $gtkextra_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\2/'`
    gtkextra_config_micro_version=`$GTK_EXTRA_CONFIG $gtkextra_config_args --version | \
           sed 's/\([[0-9]]*\).\([[0-9]]*\).\([[0-9]]*\)/\3/'`
    if test "x$enable_gtkextratest" = "xyes" ; then
      ac_save_CFLAGS="$CFLAGS"
      ac_save_LIBS="$LIBS"
      CFLAGS="$CFLAGS $GTK_EXTRA_CFLAGS $GTK_CFLAGS"
      LIBS="$GTK_EXTRA_LIBS $GTK_LIBS $LIBS"
dnl
dnl Now check if the installed GTK_EXTRA is sufficiently new. (Also sanity
dnl checks the results of gtkextra-config to some extent
dnl
      rm -f conf.gtkextratest
      AC_TRY_RUN([
#include <gtkextra/gtkextra.h>
#include <stdio.h>
#include <stdlib.h>

int 
main ()
{
  int major, minor, micro;
  char *tmp_version;

  system ("touch conf.gtkextratest");

  /* HP/UX 9 (%@#!) writes to sscanf strings */
  tmp_version = g_strdup("$min_gtkextra_version");
  if (sscanf(tmp_version, "%d.%d.%d", &major, &minor, &micro) != 3) {
     printf("%s, bad version string\n", "$min_gtkextra_version");
     exit(1);
   }

  if ((gtkextra_major_version != $gtkextra_config_major_version) ||
      (gtkextra_minor_version != $gtkextra_config_minor_version) ||
      (gtkextra_micro_version != $gtkextra_config_micro_version))
    {
      printf("\n*** 'gtkextra-config --version' returned %d.%d.%d, but GTK_EXTRA+ (%d.%d.%d)\n", 
             $gtkextra_config_major_version, $gtkextra_config_minor_version, $gtkextra_config_micro_version,
             gtkextra_major_version, gtkextra_minor_version, gtkextra_micro_version);
      printf ("*** was found! If gtkextra-config was correct, then it is best\n");
      printf ("*** to remove the old version of GTK_EXTRA+. You may also be able to fix the error\n");
      printf("*** by modifying your LD_LIBRARY_PATH enviroment variable, or by editing\n");
      printf("*** /etc/ld.so.conf. Make sure you have run ldconfig if that is\n");
      printf("*** required on your system.\n");
      printf("*** If gtkextra-config was wrong, set the environment variable GTK_EXTRA_CONFIG\n");
      printf("*** to point to the correct copy of gtkextra-config, and remove the file config.cache\n");
      printf("*** before re-running configure\n");
    } 
#if defined (GTK_EXTRA_MAJOR_VERSION) && defined (GTK_EXTRA_MINOR_VERSION) && defined (GTK_EXTRA_MICRO_VERSION)
  else if ((gtkextra_major_version != GTK_EXTRA_MAJOR_VERSION) ||
	   (gtkextra_minor_version != GTK_EXTRA_MINOR_VERSION) ||
           (gtkextra_micro_version != GTK_EXTRA_MICRO_VERSION))
    {
      printf("*** GTK_EXTRA+ header files (version %d.%d.%d) do not match\n",
	     GTK_EXTRA_MAJOR_VERSION, GTK_EXTRA_MINOR_VERSION, GTK_EXTRA_MICRO_VERSION);
      printf("*** library (version %d.%d.%d)\n",
	     gtkextra_major_version, gtkextra_minor_version, gtkextra_micro_version);
    }
#endif /* defined (GTK_EXTRA_MAJOR_VERSION) ... */
  else
    {
      if ((gtkextra_major_version > major) ||
        ((gtkextra_major_version == major) && (gtkextra_minor_version > minor)) ||
        ((gtkextra_major_version == major) && (gtkextra_minor_version == minor) && (gtkextra_micro_version >= micro)))
      {
        return 0;
       }
     else
      {
        printf("\n*** An old version of GTK_EXTRA+ (%d.%d.%d) was found.\n",
               gtkextra_major_version, gtkextra_minor_version, gtkextra_micro_version);
        printf("*** You need a version of GTK_EXTRA+ newer than %d.%d.%d. The latest version of\n",
	       major, minor, micro);
        printf("*** GTK_EXTRA+ is always available from ftp://ftp.gtkextra.org.\n");
        printf("***\n");
        printf("*** If you have already installed a sufficiently new version, this error\n");
        printf("*** probably means that the wrong copy of the gtkextra-config shell script is\n");
        printf("*** being found. The easiest way to fix this is to remove the old version\n");
        printf("*** of GTK_EXTRA+, but you can also set the GTK_EXTRA_CONFIG environment to point to the\n");
        printf("*** correct copy of gtkextra-config. (In this case, you will have to\n");
        printf("*** modify your LD_LIBRARY_PATH enviroment variable, or edit /etc/ld.so.conf\n");
        printf("*** so that the correct libraries are found at run-time))\n");
      }
    }
  return 1;
}
],, no_gtkextra=yes,[echo $ac_n "cross compiling; assumed OK... $ac_c"])
       CFLAGS="$ac_save_CFLAGS"
       LIBS="$ac_save_LIBS"
     fi
  fi
  if test "x$no_gtkextra" = x ; then
     AC_MSG_RESULT(yes)
     ifelse([$2], , :, [$2])     
  else
     AC_MSG_RESULT(no)
     if test "$GTK_EXTRA_CONFIG" = "no" ; then
       echo "*** The gtkextra-config script installed by GTK_EXTRA could not be found"
       echo "*** If GTK_EXTRA was installed in PREFIX, make sure PREFIX/bin is in"
       echo "*** your path, or set the GTK_EXTRA_CONFIG environment variable to the"
       echo "*** full path to gtkextra-config."
     else
       if test -f conf.gtkextratest ; then
        :
       else
          echo "*** Could not run GTK_EXTRA test program, checking why..."
          CFLAGS="$CFLAGS $GTK_EXTRA_CFLAGS $GTK_CFLAGS"
          LIBS="$LIBS $GTK_EXTRA_LIBS $GTK_LIBS"
          AC_TRY_LINK([
#include <gtkextra/gtkextra.h>
#include <stdio.h>
],      [ return ((gtkextra_major_version) || (gtkextra_minor_version) || (gtkextra_micro_version)); ],
        [ echo "*** The test program compiled, but did not run. This usually means"
          echo "*** that the run-time linker is not finding GTK_EXTRA or finding the wrong"
          echo "*** version of GTK_EXTRA. If it is not finding GTK_EXTRA, you'll need to set your"
          echo "*** LD_LIBRARY_PATH environment variable, or edit /etc/ld.so.conf to point"
          echo "*** to the installed location  Also, make sure you have run ldconfig if that"
          echo "*** is required on your system"
	  echo "***"
          echo "*** If you have an old version installed, it is best to remove it, although"
          echo "*** you may also be able to get things to work by modifying LD_LIBRARY_PATH"
          echo "***"
          echo "*** If you have a RedHat 5.0 system, you should remove the GTK_EXTRA package that"
          echo "*** came with the system with the command"
          echo "***"
          echo "***    rpm --erase --nodeps gtkextra gtkextra-devel" ],
        [ echo "*** The test program failed to compile or link. See the file config.log for the"
          echo "*** exact error that occured. This usually means GTK_EXTRA was incorrectly installed"
          echo "*** or that you have moved GTK_EXTRA since it was installed. In the latter case, you"
          echo "*** may want to edit the gtkextra-config script: $GTK_EXTRA_CONFIG" ])
          CFLAGS="$ac_save_CFLAGS"
          LIBS="$ac_save_LIBS"
       fi
     fi
     GTK_EXTRA_CFLAGS=""
     GTK_EXTRA_LIBS=""
     ifelse([$3], , :, [$3])
  fi
  AC_SUBST(GTK_EXTRA_CFLAGS)
  AC_SUBST(GTK_EXTRA_LIBS)
  rm -f conf.gtkextratest
])

# Macro to add for using GNU gettext.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file can be copied and used freely without restrictions.  It can
# be used in projects which are not available under the GNU General Public
# License or the GNU Library General Public License but which still want
# to provide support for the GNU gettext functionality.
# Please note that the actual code of the GNU gettext library is covered
# by the GNU Library General Public License, and the rest of the GNU
# gettext package package is covered by the GNU General Public License.
# They are *not* in the public domain.

# serial 10

dnl Usage: AM_WITH_NLS([TOOLSYMBOL], [NEEDSYMBOL], [LIBDIR]).
dnl If TOOLSYMBOL is specified and is 'use-libtool', then a libtool library
dnl    $(top_builddir)/intl/libintl.la will be created (shared and/or static,
dnl    depending on --{enable,disable}-{shared,static} and on the presence of
dnl    AM-DISABLE-SHARED). Otherwise, a static library
dnl    $(top_builddir)/intl/libintl.a will be created.
dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext
dnl    implementations (in libc or libintl) without the ngettext() function
dnl    will be ignored.
dnl LIBDIR is used to find the intl libraries.  If empty,
dnl    the value `$(top_builddir)/intl/' is used.
dnl
dnl The result of the configuration is one of three cases:
dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled
dnl    and used.
dnl    Catalog format: GNU --> install in $(datadir)
dnl    Catalog extension: .mo after installation, .gmo in source tree
dnl 2) GNU gettext has been found in the system's C library.
dnl    Catalog format: GNU --> install in $(datadir)
dnl    Catalog extension: .mo after installation, .gmo in source tree
dnl 3) No internationalization, always use English msgid.
dnl    Catalog format: none
dnl    Catalog extension: none
dnl The use of .gmo is historical (it was needed to avoid overwriting the
dnl GNU format catalogs when building on a platform with an X/Open gettext),
dnl but we keep it in order not to force irrelevant filename changes on the
dnl maintainers.
dnl
AC_DEFUN([AM_WITH_NLS],
  [AC_MSG_CHECKING([whether NLS is requested])
    dnl Default is enabled NLS
    AC_ARG_ENABLE(nls,
      [  --disable-nls           do not use Native Language Support],
      USE_NLS=$enableval, USE_NLS=yes)
    AC_MSG_RESULT($USE_NLS)
    AC_SUBST(USE_NLS)

    BUILD_INCLUDED_LIBINTL=no
    USE_INCLUDED_LIBINTL=no
    INTLLIBS=

    dnl If we use NLS figure out what method
    if test "$USE_NLS" = "yes"; then
      AC_DEFINE(ENABLE_NLS, 1,
        [Define to 1 if translation of program messages to the user's native language
   is requested.])
      AC_MSG_CHECKING([whether included gettext is requested])
      AC_ARG_WITH(included-gettext,
        [  --with-included-gettext use the GNU gettext library included here],
        nls_cv_force_use_gnu_gettext=$withval,
        nls_cv_force_use_gnu_gettext=no)
      AC_MSG_RESULT($nls_cv_force_use_gnu_gettext)

      nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext"
      if test "$nls_cv_force_use_gnu_gettext" != "yes"; then
        dnl User does not insist on using GNU NLS library.  Figure out what
        dnl to use.  If GNU gettext is available we use this.  Else we have
        dnl to fall back to GNU NLS library.
	CATOBJEXT=NONE

        dnl Add a version number to the cache macros.
        define(gt_cv_func_gnugettext_libc, [gt_cv_func_gnugettext]ifelse([$2], need-ngettext, 2, 1)[_libc])
        define(gt_cv_func_gnugettext_libintl, [gt_cv_func_gnugettext]ifelse([$2], need-ngettext, 2, 1)[_libintl])

	AC_CHECK_HEADER(libintl.h,
	  [AC_CACHE_CHECK([for GNU gettext in libc], gt_cv_func_gnugettext_libc,
	    [AC_TRY_LINK([#include <libintl.h>
extern int _nl_msg_cat_cntr;],
	       [bindtextdomain ("", "");
return (int) gettext ("")]ifelse([$2], need-ngettext, [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr],
	       gt_cv_func_gnugettext_libc=yes,
	       gt_cv_func_gnugettext_libc=no)])

	   if test "$gt_cv_func_gnugettext_libc" != "yes"; then
	     AC_CACHE_CHECK([for GNU gettext in libintl],
	       gt_cv_func_gnugettext_libintl,
	       [gt_save_LIBS="$LIBS"
		LIBS="$LIBS -lintl $LIBICONV"
		AC_TRY_LINK([#include <libintl.h>
extern int _nl_msg_cat_cntr;],
		  [bindtextdomain ("", "");
return (int) gettext ("")]ifelse([$2], need-ngettext, [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr],
		  gt_cv_func_gnugettext_libintl=yes,
		  gt_cv_func_gnugettext_libintl=no)
		LIBS="$gt_save_LIBS"])
	   fi

	   dnl If an already present or preinstalled GNU gettext() is found,
	   dnl use it.  But if this macro is used in GNU gettext, and GNU
	   dnl gettext is already preinstalled in libintl, we update this
	   dnl libintl.  (Cf. the install rule in intl/Makefile.in.)
	   if test "$gt_cv_func_gnugettext_libc" = "yes" \
	      || { test "$gt_cv_func_gnugettext_libintl" = "yes" \
		   && test "$PACKAGE" != gettext; }; then
	     AC_DEFINE(HAVE_GETTEXT, 1,
               [Define if the GNU gettext() function is already present or preinstalled.])

	     if test "$gt_cv_func_gnugettext_libintl" = "yes"; then
	       dnl If iconv() is in a separate libiconv library, then anyone
	       dnl linking with libintl{.a,.so} also needs to link with
	       dnl libiconv.
	       INTLLIBS="-lintl $LIBICONV"
	     fi

	     gt_save_LIBS="$LIBS"
	     LIBS="$LIBS $INTLLIBS"
	     AC_CHECK_FUNCS(dcgettext)
	     LIBS="$gt_save_LIBS"

	     dnl Search for GNU msgfmt in the PATH.
	     AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
	       [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1], :)
	     AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)

	     dnl Search for GNU xgettext in the PATH.
	     AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
	       [$ac_dir/$ac_word --omit-header /dev/null >/dev/null 2>&1], :)

	     CATOBJEXT=.gmo
	   fi
	])

        if test "$CATOBJEXT" = "NONE"; then
	  dnl GNU gettext is not found in the C library.
	  dnl Fall back on GNU gettext library.
	  nls_cv_use_gnu_gettext=yes
        fi
      fi

      if test "$nls_cv_use_gnu_gettext" = "yes"; then
        dnl Mark actions used to generate GNU NLS library.
        INTLOBJS="\$(GETTOBJS)"
        AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt,
	  [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1], :)
        AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT)
        AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext,
	  [$ac_dir/$ac_word --omit-header /dev/null >/dev/null 2>&1], :)
        AC_SUBST(MSGFMT)
	BUILD_INCLUDED_LIBINTL=yes
	USE_INCLUDED_LIBINTL=yes
        CATOBJEXT=.gmo
	INTLLIBS="ifelse([$3],[],\$(top_builddir)/intl,[$3])/libintl.ifelse([$1], use-libtool, [l], [])a $LIBICONV"
	LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'`
      fi

      dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
      dnl Test whether we really found GNU msgfmt.
      if test "$GMSGFMT" != ":"; then
	dnl If it is no GNU msgfmt we define it as : so that the
	dnl Makefiles still can work.
	if $GMSGFMT --statistics /dev/null >/dev/null 2>&1; then
	  : ;
	else
	  AC_MSG_RESULT(
	    [found msgfmt program is not GNU msgfmt; ignore it])
	  GMSGFMT=":"
	fi
      fi

      dnl This could go away some day; the PATH_PROG_WITH_TEST already does it.
      dnl Test whether we really found GNU xgettext.
      if test "$XGETTEXT" != ":"; then
	dnl If it is no GNU xgettext we define it as : so that the
	dnl Makefiles still can work.
	if $XGETTEXT --omit-header /dev/null >/dev/null 2>&1; then
	  : ;
	else
	  AC_MSG_RESULT(
	    [found xgettext program is not GNU xgettext; ignore it])
	  XGETTEXT=":"
	fi
      fi

      dnl We need to process the po/ directory.
      POSUB=po
    fi
    AC_OUTPUT_COMMANDS(
     [for ac_file in $CONFIG_FILES; do
        # Support "outfile[:infile[:infile...]]"
        case "$ac_file" in
          *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;;
        esac
        # PO directories have a Makefile.in generated from Makefile.in.in.
        case "$ac_file" in */Makefile.in)
          # Adjust a relative srcdir.
          ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'`
          ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`"
          ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'`
          # In autoconf-2.13 it is called $ac_given_srcdir.
          # In autoconf-2.50 it is called $srcdir.
          test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir"
          case "$ac_given_srcdir" in
            .)  top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;;
            /*) top_srcdir="$ac_given_srcdir" ;;
            *)  top_srcdir="$ac_dots$ac_given_srcdir" ;;
          esac
          if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then
            rm -f "$ac_dir/POTFILES"
            test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES"
            sed -e "/^#/d" -e "/^[ 	]*\$/d" -e "s,.*,     $top_srcdir/& \\\\," -e "\$s/\(.*\) \\\\/\1/" < "$ac_given_srcdir/$ac_dir/POTFILES.in" > "$ac_dir/POTFILES"
            test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile"
            sed -e "/POTFILES =/r $ac_dir/POTFILES" "$ac_dir/Makefile.in" > "$ac_dir/Makefile"
          fi
          ;;
        esac
      done])


    dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL
    dnl to 'yes' because some of the testsuite requires it.
    if test "$PACKAGE" = gettext; then
      BUILD_INCLUDED_LIBINTL=yes
    fi

    dnl intl/plural.c is generated from intl/plural.y. It requires bison,
    dnl because plural.y uses bison specific features. It requires at least
    dnl bison-1.26 because earlier versions generate a plural.c that doesn't
    dnl compile.
    dnl bison is only needed for the maintainer (who touches plural.y). But in
    dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put
    dnl the rule in general Makefile. Now, some people carelessly touch the
    dnl files or have a broken "make" program, hence the plural.c rule will
    dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not
    dnl present or too old.
    AC_CHECK_PROGS([INTLBISON], [bison])
    if test -z "$INTLBISON"; then
      ac_verc_fail=yes
    else
      dnl Found it, now check the version.
      AC_MSG_CHECKING([version of bison])
changequote(<<,>>)dnl
      ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'`
      case $ac_prog_version in
        '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;;
        1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*)
changequote([,])dnl
           ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;;
        *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;;
      esac
      AC_MSG_RESULT([$ac_prog_version])
    fi
    if test $ac_verc_fail = yes; then
      INTLBISON=:
    fi

    dnl These rules are solely for the distribution goal.  While doing this
    dnl we only have to keep exactly one list of the available catalogs
    dnl in configure.in.
    for lang in $ALL_LINGUAS; do
      GMOFILES="$GMOFILES $lang.gmo"
      POFILES="$POFILES $lang.po"
    done

    dnl Make all variables we use known to autoconf.
    AC_SUBST(BUILD_INCLUDED_LIBINTL)
    AC_SUBST(USE_INCLUDED_LIBINTL)
    AC_SUBST(CATALOGS)
    AC_SUBST(CATOBJEXT)
    AC_SUBST(GMOFILES)
    AC_SUBST(INTLLIBS)
    AC_SUBST(INTLOBJS)
    AC_SUBST(POFILES)
    AC_SUBST(POSUB)

    dnl For backward compatibility. Some configure.ins may be using this.
    nls_cv_header_intl=
    nls_cv_header_libgt=

    dnl For backward compatibility. Some Makefiles may be using this.
    DATADIRNAME=share
    AC_SUBST(DATADIRNAME)

    dnl For backward compatibility. Some Makefiles may be using this.
    INSTOBJEXT=.mo
    AC_SUBST(INSTOBJEXT)

    dnl For backward compatibility. Some Makefiles may be using this.
    GENCAT=gencat
    AC_SUBST(GENCAT)
  ])

dnl Usage: Just like AM_WITH_NLS, which see.
AC_DEFUN([AM_GNU_GETTEXT],
  [AC_REQUIRE([AC_PROG_MAKE_SET])dnl
   AC_REQUIRE([AC_PROG_CC])dnl
   AC_REQUIRE([AC_CANONICAL_HOST])dnl
   AC_REQUIRE([AC_PROG_RANLIB])dnl
   AC_REQUIRE([AC_ISC_POSIX])dnl
   AC_REQUIRE([AC_HEADER_STDC])dnl
   AC_REQUIRE([AC_C_CONST])dnl
   AC_REQUIRE([AC_C_INLINE])dnl
   AC_REQUIRE([AC_TYPE_OFF_T])dnl
   AC_REQUIRE([AC_TYPE_SIZE_T])dnl
   AC_REQUIRE([AC_FUNC_ALLOCA])dnl
   AC_REQUIRE([AC_FUNC_MMAP])dnl
   AC_REQUIRE([jm_GLIBC21])dnl

   AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h stddef.h \
stdlib.h string.h unistd.h sys/param.h])
   AC_CHECK_FUNCS([feof_unlocked fgets_unlocked getcwd getegid geteuid \
getgid getuid mempcpy munmap putenv setenv setlocale stpcpy strchr strcasecmp \
strdup strtoul tsearch __argz_count __argz_stringify __argz_next])

   AM_ICONV
   AM_LANGINFO_CODESET
   AM_LC_MESSAGES
   AM_WITH_NLS([$1],[$2],[$3])

   if test "x$CATOBJEXT" != "x"; then
     if test "x$ALL_LINGUAS" = "x"; then
       LINGUAS=
     else
       AC_MSG_CHECKING(for catalogs to be installed)
       NEW_LINGUAS=
       for presentlang in $ALL_LINGUAS; do
         useit=no
         for desiredlang in ${LINGUAS-$ALL_LINGUAS}; do
           # Use the presentlang catalog if desiredlang is
           #   a. equal to presentlang, or
           #   b. a variant of presentlang (because in this case,
           #      presentlang can be used as a fallback for messages
           #      which are not translated in the desiredlang catalog).
           case "$desiredlang" in
             "$presentlang"*) useit=yes;;
           esac
         done
         if test $useit = yes; then
           NEW_LINGUAS="$NEW_LINGUAS $presentlang"
         fi
       done
       LINGUAS=$NEW_LINGUAS
       AC_MSG_RESULT($LINGUAS)
     fi

     dnl Construct list of names of catalog files to be constructed.
     if test -n "$LINGUAS"; then
       for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done
     fi
   fi

   dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly
   dnl find the mkinstalldirs script in another subdir but $(top_srcdir).
   dnl Try to locate is.
   MKINSTALLDIRS=
   if test -n "$ac_aux_dir"; then
     MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs"
   fi
   if test -z "$MKINSTALLDIRS"; then
     MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs"
   fi
   AC_SUBST(MKINSTALLDIRS)

   dnl Enable libtool support if the surrounding package wishes it.
   INTL_LIBTOOL_SUFFIX_PREFIX=ifelse([$1], use-libtool, [l], [])
   AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX)
  ])

# Search path for a program which passes the given test.
# Ulrich Drepper <drepper@cygnus.com>, 1996.
#
# This file can be copied and used freely without restrictions.  It can
# be used in projects which are not available under the GNU General Public
# License or the GNU Library General Public License but which still want
# to provide support for the GNU gettext functionality.
# Please note that the actual code of the GNU gettext library is covered
# by the GNU Library General Public License, and the rest of the GNU
# gettext package package is covered by the GNU General Public License.
# They are *not* in the public domain.

# serial 2

dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR,
dnl   TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]])
AC_DEFUN([AM_PATH_PROG_WITH_TEST],
[# Extract the first word of "$2", so it can be a program name with args.
set dummy $2; ac_word=[$]2
AC_MSG_CHECKING([for $ac_word])
AC_CACHE_VAL(ac_cv_path_$1,
[case "[$]$1" in
  /*)
  ac_cv_path_$1="[$]$1" # Let the user override the test with a path.
  ;;
  *)
  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
  for ac_dir in ifelse([$5], , $PATH, [$5]); do
    test -z "$ac_dir" && ac_dir=.
    if test -f $ac_dir/$ac_word; then
      if [$3]; then
	ac_cv_path_$1="$ac_dir/$ac_word"
	break
      fi
    fi
  done
  IFS="$ac_save_ifs"
dnl If no 4th arg is given, leave the cache variable unset,
dnl so AC_PATH_PROGS will keep looking.
ifelse([$4], , , [  test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4"
])dnl
  ;;
esac])dnl
$1="$ac_cv_path_$1"
if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then
  AC_MSG_RESULT([$]$1)
else
  AC_MSG_RESULT(no)
fi
AC_SUBST($1)dnl
])

#serial 2

# Test for the GNU C Library, version 2.1 or newer.
# From Bruno Haible.

AC_DEFUN([jm_GLIBC21],
  [
    AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer,
      ac_cv_gnu_library_2_1,
      [AC_EGREP_CPP([Lucky GNU user],
	[
#include <features.h>
#ifdef __GNU_LIBRARY__
 #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2)
  Lucky GNU user
 #endif
#endif
	],
	ac_cv_gnu_library_2_1=yes,
	ac_cv_gnu_library_2_1=no)
      ]
    )
    AC_SUBST(GLIBC21)
    GLIBC21="$ac_cv_gnu_library_2_1"
  ]
)

#serial AM2

dnl From Bruno Haible.

AC_DEFUN([AM_ICONV],
[
  dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and
  dnl those with the standalone portable GNU libiconv installed).

  AC_ARG_WITH([libiconv-prefix],
[  --with-libiconv-prefix=DIR  search for libiconv in DIR/include and DIR/lib], [
    for dir in `echo "$withval" | tr : ' '`; do
      if test -d $dir/include; then CPPFLAGS="$CPPFLAGS -I$dir/include"; fi
      if test -d $dir/lib; then LDFLAGS="$LDFLAGS -L$dir/lib"; fi
    done
   ])

  AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [
    am_cv_func_iconv="no, consider installing GNU libiconv"
    am_cv_lib_iconv=no
    AC_TRY_LINK([#include <stdlib.h>
#include <iconv.h>],
      [iconv_t cd = iconv_open("","");
       iconv(cd,NULL,NULL,NULL,NULL);
       iconv_close(cd);],
      am_cv_func_iconv=yes)
    if test "$am_cv_func_iconv" != yes; then
      am_save_LIBS="$LIBS"
      LIBS="$LIBS -liconv"
      AC_TRY_LINK([#include <stdlib.h>
#include <iconv.h>],
        [iconv_t cd = iconv_open("","");
         iconv(cd,NULL,NULL,NULL,NULL);
         iconv_close(cd);],
        am_cv_lib_iconv=yes
        am_cv_func_iconv=yes)
      LIBS="$am_save_LIBS"
    fi
  ])
  if test "$am_cv_func_iconv" = yes; then
    AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.])
    AC_MSG_CHECKING([for iconv declaration])
    AC_CACHE_VAL(am_cv_proto_iconv, [
      AC_TRY_COMPILE([
#include <stdlib.h>
#include <iconv.h>
extern
#ifdef __cplusplus
"C"
#endif
#if defined(__STDC__) || defined(__cplusplus)
size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);
#else
size_t iconv();
#endif
], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const")
      am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"])
    am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'`
    AC_MSG_RESULT([$]{ac_t:-
         }[$]am_cv_proto_iconv)
    AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1,
      [Define as const if the declaration of iconv() needs const.])
  fi
  LIBICONV=
  if test "$am_cv_lib_iconv" = yes; then
    LIBICONV="-liconv"
  fi
  AC_SUBST(LIBICONV)
])

#serial AM1

dnl From Bruno Haible.

AC_DEFUN([AM_LANGINFO_CODESET],
[
  AC_CACHE_CHECK([for nl_langinfo and CODESET], am_cv_langinfo_codeset,
    [AC_TRY_LINK([#include <langinfo.h>],
      [char* cs = nl_langinfo(CODESET);],
      am_cv_langinfo_codeset=yes,
      am_cv_langinfo_codeset=no)
    ])
  if test $am_cv_langinfo_codeset = yes; then
    AC_DEFINE(HAVE_LANGINFO_CODESET, 1,
      [Define if you have <langinfo.h> and nl_langinfo(CODESET).])
  fi
])

# Check whether LC_MESSAGES is available in <locale.h>.
# Ulrich Drepper <drepper@cygnus.com>, 1995.
#
# This file can be copied and used freely without restrictions.  It can
# be used in projects which are not available under the GNU General Public
# License or the GNU Library General Public License but which still want
# to provide support for the GNU gettext functionality.
# Please note that the actual code of the GNU gettext library is covered
# by the GNU Library General Public License, and the rest of the GNU
# gettext package package is covered by the GNU General Public License.
# They are *not* in the public domain.

# serial 2

AC_DEFUN([AM_LC_MESSAGES],
  [if test $ac_cv_header_locale_h = yes; then
    AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES,
      [AC_TRY_LINK([#include <locale.h>], [return LC_MESSAGES],
       am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)])
    if test $am_cv_val_LC_MESSAGES = yes; then
      AC_DEFINE(HAVE_LC_MESSAGES, 1,
        [Define if your <locale.h> file defines LC_MESSAGES.])
    fi
  fi])