**DO NOT READ THIS FILE ON GITHUB, GUIDES ARE PUBLISHED ON https://guides.rubyonrails.org.**

Active Storage Overview
=======================

This guide covers how to attach files to your Active Record models.

After reading this guide, you will know:

* How to attach one or many files to a record.
* How to delete an attached file.
* How to link to an attached file.
* How to use variants to transform images.
* How to generate an image representation of a non-image file, such as a PDF or a video.
* How to send file uploads directly from browsers to a storage service,
  bypassing your application servers.
* How to clean up files stored during testing.
* How to implement support for additional storage services.

--------------------------------------------------------------------------------

What is Active Storage?
-----------------------

Active Storage facilitates uploading files to a cloud storage service like
Amazon S3, Google Cloud Storage, or Microsoft Azure Storage and attaching those
files to Active Record objects. It comes with a local disk-based service for
development and testing and supports mirroring files to subordinate services for
backups and migrations.

Using Active Storage, an application can transform image uploads or generate image
representations of non-image uploads like PDFs and videos, and extract metadata from
arbitrary files.

### Requirements

Various features of Active Storage depend on third-party software which Rails
will not install, and must be installed separately:

* [libvips](https://github.com/libvips/libvips) v8.6+ or [ImageMagick](https://imagemagick.org/index.php) for image analysis and transformations
* [ffmpeg](http://ffmpeg.org/) v3.4+ for video previews and ffprobe for video/audio analysis
* [poppler](https://poppler.freedesktop.org/) or [muPDF](https://mupdf.com/) for PDF previews

Image analysis and transformations also require the `image_processing` gem. Uncomment it in your `Gemfile`, or add it if necessary:

```ruby
gem "image_processing", ">= 1.2"
```

TIP: Compared to libvips, ImageMagick is better known and more widely available. However, libvips can be [up to 10x faster and consume 1/10 the memory](https://github.com/libvips/libvips/wiki/Speed-and-memory-use). For JPEG files, this can be further improved by replacing `libjpeg-dev` with `libjpeg-turbo-dev`, which is [2-7x faster](https://libjpeg-turbo.org/About/Performance).

WARNING: Before you install and use third-party software, make sure you understand the licensing implications of doing so. MuPDF, in particular, is licensed under AGPL and requires a commercial license for some use.

## Setup

```bash
$ bin/rails active_storage:install
$ bin/rails db:migrate
```

This sets up configuration, and creates the three tables Active Storage uses:
`active_storage_blobs`, `active_storage_attachments`, and `active_storage_variant_records`.

| Table      | Purpose |
| ------------------- | ----- |
| `active_storage_blobs` | Stores data about uploaded files, such as filename and content type. |
| `active_storage_attachments` | A polymorphic join table that [connects your models to blobs](#attaching-files-to-records). If your model's class name changes, you will need to run a migration on this table to update the underlying `record_type` to your model's new class name. |
| `active_storage_variant_records` | If [variant tracking](#attaching-files-to-records) is enabled, stores records for each variant that has been generated. |

WARNING: If you are using UUIDs instead of integers as the primary key on your models, you should set `Rails.application.config.generators { |g| g.orm :active_record, primary_key_type: :uuid }` in a config file.

Declare Active Storage services in `config/storage.yml`. For each service your
application uses, provide a name and the requisite configuration. The example
below declares three services named `local`, `test`, and `amazon`:

```yaml
local:
  service: Disk
  root: <%= Rails.root.join("storage") %>

test:
  service: Disk
  root: <%= Rails.root.join("tmp/storage") %>

# Use bin/rails credentials:edit to set the AWS secrets (as aws:access_key_id|secret_access_key)
amazon:
  service: S3
  access_key_id: <%= Rails.application.credentials.dig(:aws, :access_key_id) %>
  secret_access_key: <%= Rails.application.credentials.dig(:aws, :secret_access_key) %>
  bucket: your_own_bucket-<%= Rails.env %>
  region: "" # e.g. 'us-east-1'
```

Tell Active Storage which service to use by setting
`Rails.application.config.active_storage.service`. Because each environment will
likely use a different service, it is recommended to do this on a
per-environment basis. To use the disk service from the previous example in the
development environment, you would add the following to
`config/environments/development.rb`:

```ruby
# Store files locally.
config.active_storage.service = :local
```

To use the S3 service in production, you add the following to
`config/environments/production.rb`:

```ruby
# Store files on Amazon S3.
config.active_storage.service = :amazon
```

To use the test service when testing, you add the following to
`config/environments/test.rb`:

```ruby
# Store uploaded files on the local file system in a temporary directory.
config.active_storage.service = :test
```

NOTE: Configuration files that are environment-specific will take precedence:
in production, for example, the `config/storage/production.yml` file (if existent)
will take precedence over the `config/storage.yml` file.

It is recommended to use `Rails.env` in the bucket names to further reduce the risk of accidentally destroying production data.

```yaml
amazon:
  service: S3
  # ...
  bucket: your_own_bucket-<%= Rails.env %>

google:
  service: GCS
  # ...
  bucket: your_own_bucket-<%= Rails.env %>

azure:
  service: AzureStorage
  # ...
  container: your_container_name-<%= Rails.env %>
```

Continue reading for more information on the built-in service adapters (e.g.
`Disk` and `S3`) and the configuration they require.

### Disk Service

Declare a Disk service in `config/storage.yml`:

```yaml
local:
  service: Disk
  root: <%= Rails.root.join("storage") %>
```

### S3 Service (Amazon S3 and S3-compatible APIs)

To connect to Amazon S3, declare an S3 service in `config/storage.yml`:

```yaml
# Use bin/rails credentials:edit to set the AWS secrets (as aws:access_key_id|secret_access_key)
amazon:
  service: S3
  access_key_id: <%= Rails.application.credentials.dig(:aws, :access_key_id) %>
  secret_access_key: <%= Rails.application.credentials.dig(:aws, :secret_access_key) %>
  region: "" # e.g. 'us-east-1'
  bucket: your_own_bucket-<%= Rails.env %>
```

Optionally provide client and upload options:

```yaml
# Use bin/rails credentials:edit to set the AWS secrets (as aws:access_key_id|secret_access_key)
amazon:
  service: S3
  access_key_id: <%= Rails.application.credentials.dig(:aws, :access_key_id) %>
  secret_access_key: <%= Rails.application.credentials.dig(:aws, :secret_access_key) %>
  region: "" # e.g. 'us-east-1'
  bucket: your_own_bucket-<%= Rails.env %>
  http_open_timeout: 0
  http_read_timeout: 0
  retry_limit: 0
  upload:
    server_side_encryption: "" # 'aws:kms' or 'AES256'
    cache_control: "private, max-age=<%= 1.day.to_i %>"
```

TIP: Set sensible client HTTP timeouts and retry limits for your application. In certain failure scenarios, the default AWS client configuration may cause connections to be held for up to several minutes and lead to request queuing.

Add the [`aws-sdk-s3`](https://github.com/aws/aws-sdk-ruby) gem to your `Gemfile`:

```ruby
gem "aws-sdk-s3", require: false
```

NOTE: The core features of Active Storage require the following permissions: `s3:ListBucket`, `s3:PutObject`, `s3:GetObject`, and `s3:DeleteObject`. [Public access](#public-access) additionally requires `s3:PutObjectAcl`. If you have additional upload options configured such as setting ACLs then additional permissions may be required.

NOTE: If you want to use environment variables, standard SDK configuration files, profiles,
IAM instance profiles or task roles, you can omit the `access_key_id`, `secret_access_key`,
and `region` keys in the example above. The S3 Service supports all of the
authentication options described in the [AWS SDK documentation](https://docs.aws.amazon.com/sdk-for-ruby/v3/developer-guide/setup-config.html).

To connect to an S3-compatible object storage API such as DigitalOcean Spaces, provide the `endpoint`:

```yaml
digitalocean:
  service: S3
  endpoint: https://nyc3.digitaloceanspaces.com
  access_key_id: <%= Rails.application.credentials.dig(:digitalocean, :access_key_id) %>
  secret_access_key: <%= Rails.application.credentials.dig(:digitalocean, :secret_access_key) %>
  # ...and other options
```

There are many other options available. You can check them in [AWS S3 Client](https://docs.aws.amazon.com/sdk-for-ruby/v3/api/Aws/S3/Client.html#initialize-instance_method) documentation.

### Microsoft Azure Storage Service

Declare an Azure Storage service in `config/storage.yml`:

```yaml
# Use bin/rails credentials:edit to set the Azure Storage secret (as azure_storage:storage_access_key)
azure:
  service: AzureStorage
  storage_account_name: your_account_name
  storage_access_key: <%= Rails.application.credentials.dig(:azure_storage, :storage_access_key) %>
  container: your_container_name-<%= Rails.env %>
```

Add the [`azure-storage-blob`](https://github.com/Azure/azure-storage-ruby) gem to your `Gemfile`:

```ruby
gem "azure-storage-blob", "~> 2.0", require: false
```

### Google Cloud Storage Service

Declare a Google Cloud Storage service in `config/storage.yml`:

```yaml
google:
  service: GCS
  credentials: <%= Rails.root.join("path/to/keyfile.json") %>
  project: ""
  bucket: your_own_bucket-<%= Rails.env %>
```

Optionally provide a Hash of credentials instead of a keyfile path:

```yaml
# Use bin/rails credentials:edit to set the GCS secrets (as gcs:private_key_id|private_key)
google:
  service: GCS
  credentials:
    type: "service_account"
    project_id: ""
    private_key_id: <%= Rails.application.credentials.dig(:gcs, :private_key_id) %>
    private_key: <%= Rails.application.credentials.dig(:gcs, :private_key).dump %>
    client_email: ""
    client_id: ""
    auth_uri: "https://accounts.google.com/o/oauth2/auth"
    token_uri: "https://accounts.google.com/o/oauth2/token"
    auth_provider_x509_cert_url: "https://www.googleapis.com/oauth2/v1/certs"
    client_x509_cert_url: ""
  project: ""
  bucket: your_own_bucket-<%= Rails.env %>
```

Optionally provide a Cache-Control metadata to set on uploaded assets:

```yaml
google:
  service: GCS
  ...
  cache_control: "public, max-age=3600"
```

Optionally use [IAM](https://cloud.google.com/storage/docs/access-control/signed-urls#signing-iam) instead of the `credentials` when signing URLs. This is useful if you are authenticating your GKE applications with Workload Identity, see [this Google Cloud blog post](https://cloud.google.com/blog/products/containers-kubernetes/introducing-workload-identity-better-authentication-for-your-gke-applications) for more information.

```yaml
google:
  service: GCS
  ...
  iam: true
```

Optionally use a specific GSA when signing URLs. When using IAM, the [metadata server](https://cloud.google.com/compute/docs/storing-retrieving-metadata) will be contacted to get the GSA email, but this metadata server is not always present (e.g. local tests) and you may wish to use a non-default GSA.

```yaml
google:
  service: GCS
  ...
  iam: true
  gsa_email: "foobar@baz.iam.gserviceaccount.com"
```

Add the [`google-cloud-storage`](https://github.com/GoogleCloudPlatform/google-cloud-ruby/tree/main/google-cloud-storage) gem to your `Gemfile`:

```ruby
gem "google-cloud-storage", "~> 1.11", require: false
```

### Mirror Service

You can keep multiple services in sync by defining a mirror service. A mirror
service replicates uploads and deletes across two or more subordinate services.

A mirror service is intended to be used temporarily during a migration between
services in production. You can start mirroring to a new service, copy
pre-existing files from the old service to the new, then go all-in on the new
service.

NOTE: Mirroring is not atomic. It is possible for an upload to succeed on the
primary service and fail on any of the subordinate services. Before going
all-in on a new service, verify that all files have been copied.

Define each of the services you'd like to mirror as described above. Reference
them by name when defining a mirror service:

```yaml
# Use bin/rails credentials:edit to set the AWS secrets (as aws:access_key_id|secret_access_key)
s3_west_coast:
  service: S3
  access_key_id: <%= Rails.application.credentials.dig(:aws, :access_key_id) %>
  secret_access_key: <%= Rails.application.credentials.dig(:aws, :secret_access_key) %>
  region: "" # e.g. 'us-west-1'
  bucket: your_own_bucket-<%= Rails.env %>

s3_east_coast:
  service: S3
  access_key_id: <%= Rails.application.credentials.dig(:aws, :access_key_id) %>
  secret_access_key: <%= Rails.application.credentials.dig(:aws, :secret_access_key) %>
  region: "" # e.g. 'us-east-1'
  bucket: your_own_bucket-<%= Rails.env %>

production:
  service: Mirror
  primary: s3_east_coast
  mirrors:
    - s3_west_coast
```

Although all secondary services receive uploads, downloads are always handled
by the primary service.

Mirror services are compatible with direct uploads. New files are directly
uploaded to the primary service. When a directly-uploaded file is attached to a
record, a background job is enqueued to copy it to the secondary services.

### Public access

By default, Active Storage assumes private access to services. This means generating signed, single-use URLs for blobs. If you'd rather make blobs publicly accessible, specify `public: true` in your app's `config/storage.yml`:

```yaml
gcs: &gcs
  service: GCS
  project: ""

private_gcs:
  <<: *gcs
  credentials: <%= Rails.root.join("path/to/private_key.json") %>
  bucket: your_own_bucket-<%= Rails.env %>

public_gcs:
  <<: *gcs
  credentials: <%= Rails.root.join("path/to/public_key.json") %>
  bucket: your_own_bucket-<%= Rails.env %>
  public: true
```

Make sure your buckets are properly configured for public access. See docs on how to enable public read permissions for [Amazon S3](https://docs.aws.amazon.com/AmazonS3/latest/user-guide/block-public-access-bucket.html), [Google Cloud Storage](https://cloud.google.com/storage/docs/access-control/making-data-public#buckets), and [Microsoft Azure](https://docs.microsoft.com/en-us/azure/storage/blobs/storage-manage-access-to-resources#set-container-public-access-level-in-the-azure-portal) storage services. Amazon S3 additionally requires that you have the `s3:PutObjectAcl` permission.

When converting an existing application to use `public: true`, make sure to update every individual file in the bucket to be publicly-readable before switching over.

Attaching Files to Records
--------------------------

### `has_one_attached`

The [`has_one_attached`][] macro sets up a one-to-one mapping between records and
files. Each record can have one file attached to it.

For example, suppose your application has a `User` model. If you want each user to
have an avatar, define the `User` model as follows:

```ruby
class User < ApplicationRecord
  has_one_attached :avatar
end
```

or if you are using Rails 6.0+, you can run a model generator command like this:

```bash
$ bin/rails generate model User avatar:attachment
```

You can create a user with an avatar:

```erb
<%= form.file_field :avatar %>
```

```ruby
class SignupController < ApplicationController
  def create
    user = User.create!(user_params)
    session[:user_id] = user.id
    redirect_to root_path
  end

  private
    def user_params
      params.require(:user).permit(:email_address, :password, :avatar)
    end
end
```

Call [`avatar.attach`][Attached::One#attach] to attach an avatar to an existing user:

```ruby
user.avatar.attach(params[:avatar])
```

Call [`avatar.attached?`][Attached::One#attached?] to determine whether a particular user has an avatar:

```ruby
user.avatar.attached?
```

In some cases you might want to override a default service for a specific attachment.
You can configure specific services per attachment using the `service` option with the name of your service:

```ruby
class User < ApplicationRecord
  has_one_attached :avatar, service: :google
end
```

You can configure specific variants per attachment by calling the `variant` method on yielded attachable object:

```ruby
class User < ApplicationRecord
  has_one_attached :avatar do |attachable|
    attachable.variant :thumb, resize_to_limit: [100, 100]
  end
end
```

Call `avatar.variant(:thumb)` to get a thumb variant of an avatar:

```erb
<%= image_tag user.avatar.variant(:thumb) %>
```

You can use specific variants for previews as well:

```ruby
class User < ApplicationRecord
  has_one_attached :video do |attachable|
    attachable.variant :thumb, resize_to_limit: [100, 100]
  end
end
```

```erb
<%= image_tag user.video.preview(:thumb) %>
```

If you know in advance that your variants will be accessed, you can specify that
Rails should generate them ahead of time:

```ruby
class User < ApplicationRecord
  has_one_attached :video do |attachable|
    attachable.variant :thumb, resize_to_limit: [100, 100], preprocessed: true
  end
end
```

Rails will enqueue a job to generate the variant after the attachment is attached to the record.

NOTE: Since Active Storage relies on polymorphic associations, and [polymorphic associations](./association_basics.html#polymorphic-associations) rely on storing class names in the database, that data must remain synchronized with the class name used by the Ruby code. When renaming classes that use `has_one_attached`, make sure to also update the class names in the `active_storage_attachments.record_type` polymorphic type column of the corresponding rows.

[`has_one_attached`]: https://api.rubyonrails.org/classes/ActiveStorage/Attached/Model.html#method-i-has_one_attached
[Attached::One#attach]: https://api.rubyonrails.org/classes/ActiveStorage/Attached/One.html#method-i-attach
[Attached::One#attached?]: https://api.rubyonrails.org/classes/ActiveStorage/Attached/One.html#method-i-attached-3F

### `has_many_attached`

The [`has_many_attached`][] macro sets up a one-to-many relationship between records
and files. Each record can have many files attached to it.

For example, suppose your application has a `Message` model. If you want each
message to have many images, define the `Message` model as follows:

```ruby
class Message < ApplicationRecord
  has_many_attached :images
end
```

or if you are using Rails 6.0+, you can run a model generator command like this:

```bash
$ bin/rails generate model Message images:attachments
```

You can create a message with images:

```ruby
class MessagesController < ApplicationController
  def create
    message = Message.create!(message_params)
    redirect_to message
  end

  private
    def message_params
      params.require(:message).permit(:title, :content, images: [])
    end
end
```

Call [`images.attach`][Attached::Many#attach] to add new images to an existing message:

```ruby
@message.images.attach(params[:images])
```

Call [`images.attached?`][Attached::Many#attached?] to determine whether a particular message has any images:

```ruby
@message.images.attached?
```

Overriding the default service is done the same way as `has_one_attached`, by using the `service` option:

```ruby
class Message < ApplicationRecord
  has_many_attached :images, service: :s3
end
```

Configuring specific variants is done the same way as `has_one_attached`, by calling the `variant` method on the yielded attachable object:

```ruby
class Message < ApplicationRecord
  has_many_attached :images do |attachable|
    attachable.variant :thumb, resize_to_limit: [100, 100]
  end
end
```

[`has_many_attached`]: https://api.rubyonrails.org/classes/ActiveStorage/Attached/Model.html#method-i-has_many_attached
[Attached::Many#attach]: https://api.rubyonrails.org/classes/ActiveStorage/Attached/Many.html#method-i-attach
[Attached::Many#attached?]: https://api.rubyonrails.org/classes/ActiveStorage/Attached/Many.html#method-i-attached-3F

NOTE: Since Active Storage relies on polymorphic associations, and [polymorphic associations](./association_basics.html#polymorphic-associations) rely on storing class names in the database, that data must remain synchronized with the class name used by the Ruby code. When renaming classes that use `has_many_attached`, make sure to also update the class names in the `active_storage_attachments.record_type` polymorphic type column of the corresponding rows.

### Attaching File/IO Objects

Sometimes you need to attach a file that doesn’t arrive via an HTTP request.
For example, you may want to attach a file you generated on disk or downloaded
from a user-submitted URL. You may also want to attach a fixture file in a
model test. To do that, provide a Hash containing at least an open IO object
and a filename:

```ruby
@message.images.attach(io: File.open('/path/to/file'), filename: 'file.pdf')
```

When possible, provide a content type as well. Active Storage attempts to
determine a file’s content type from its data. It falls back to the content
type you provide if it can’t do that.

```ruby
@message.images.attach(io: File.open('/path/to/file'), filename: 'file.pdf', content_type: 'application/pdf')
```

You can bypass the content type inference from the data by passing in
`identify: false` along with the `content_type`.

```ruby
@message.images.attach(
  io: File.open('/path/to/file'),
  filename: 'file.pdf',
  content_type: 'application/pdf',
  identify: false
)
```

If you don’t provide a content type and Active Storage can’t determine the
file’s content type automatically, it defaults to application/octet-stream.

There is an additional parameter `key` that can be used to specify folders/sub-folders
in your S3 Bucket. AWS S3 otherwise uses a random key to name your files. This
approach is helpful if you want to organize your S3 Bucket files better.

```ruby
@message.images.attach(
  io: File.open('/path/to/file'),
  filename: 'file.pdf',
  content_type: 'application/pdf',
  key: "#{Rails.env}/blog_content/intuitive_filename.pdf",
  identify: false
)
```

This way the file will get saved in the folder `[S3_BUCKET]/development/blog_content/`
when you test this from your development environment. Note that if you use the key
parameter, you have to ensure the key to be unique for the upload to go through. It is
recommended to append the filename with a unique random key, something like:

```ruby
def s3_file_key
  "#{Rails.env}/blog_content/intuitive_filename-#{SecureRandom.uuid}.pdf"
end
```

```ruby
@message.images.attach(
  io: File.open('/path/to/file'),
  filename: 'file.pdf',
  content_type: 'application/pdf',
  key: s3_file_key,
  identify: false
)
```

### Replacing vs Adding Attachments

By default in Rails, attaching files to a `has_many_attached` association will replace
any existing attachments.

To keep existing attachments, you can use hidden form fields with the [`signed_id`][ActiveStorage::Blob#signed_id]
of each attached file:

```erb
<% @message.images.each do |image| %>
  <%= form.hidden_field :images, multiple: true, value: image.signed_id %>
<% end %>

<%= form.file_field :images, multiple: true %>
```

This has the advantage of making it possible to remove existing attachments
selectively, e.g. by using JavaScript to remove individual hidden fields.

[ActiveStorage::Blob#signed_id]: https://api.rubyonrails.org/classes/ActiveStorage/Blob.html#method-i-signed_id

### Form Validation

Attachments aren't sent to the storage service until a successful `save` on the
associated record. This means that if a form submission fails validation, any new
attachment(s) will be lost and must be uploaded again. Since [direct uploads](#direct-uploads)
are stored before the form is submitted, they can be used to retain uploads when validation fails:

```erb
<%= form.hidden_field :avatar, value: @user.avatar.signed_id if @user.avatar.attached? %>
<%= form.file_field :avatar, direct_upload: true %>
```

Removing Files
--------------

To remove an attachment from a model, call [`purge`][Attached::One#purge] on the
attachment. If your application is set up to use Active Job, removal can be done
in the background instead by calling [`purge_later`][Attached::One#purge_later].
Purging deletes the blob and the file from the storage service.

```ruby
# Synchronously destroy the avatar and actual resource files.
user.avatar.purge

# Destroy the associated models and actual resource files async, via Active Job.
user.avatar.purge_later
```

[Attached::One#purge]: https://api.rubyonrails.org/classes/ActiveStorage/Attached/One.html#method-i-purge
[Attached::One#purge_later]: https://api.rubyonrails.org/classes/ActiveStorage/Attached/One.html#method-i-purge_later

Serving Files
-------------

Active Storage supports two ways to serve files: redirecting and proxying.

WARNING: All Active Storage controllers are publicly accessible by default. The
generated URLs are hard to guess, but permanent by design. If your files
require a higher level of protection consider implementing
[Authenticated Controllers](#authenticated-controllers).

### Redirect Mode

To generate a permanent URL for a blob, you can pass the blob to the
[`url_for`][ActionView::RoutingUrlFor#url_for] view helper. This generates a
URL with the blob's [`signed_id`][ActiveStorage::Blob#signed_id]
that is routed to the blob's [`RedirectController`][`ActiveStorage::Blobs::RedirectController`]

```ruby
url_for(user.avatar)
# => https://www.example.com/rails/active_storage/blobs/redirect/:signed_id/my-avatar.png
```

The `RedirectController` redirects to the actual service endpoint. This
indirection decouples the service URL from the actual one, and allows, for
example, mirroring attachments in different services for high-availability. The
redirection has an HTTP expiration of 5 minutes.

To create a download link, use the `rails_blob_{path|url}` helper. Using this
helper allows you to set the disposition.

```ruby
rails_blob_path(user.avatar, disposition: "attachment")
```

WARNING: To prevent XSS attacks, Active Storage forces the Content-Disposition header
to "attachment" for some kind of files. To change this behavior see the
available configuration options in [Configuring Rails Applications](configuring.html#configuring-active-storage).

If you need to create a link from outside of controller/view context (Background
jobs, Cronjobs, etc.), you can access the `rails_blob_path` like this:

```ruby
Rails.application.routes.url_helpers.rails_blob_path(user.avatar, only_path: true)
```

[ActionView::RoutingUrlFor#url_for]: https://api.rubyonrails.org/classes/ActionView/RoutingUrlFor.html#method-i-url_for
[ActiveStorage::Blob#signed_id]: https://api.rubyonrails.org/classes/ActiveStorage/Blob.html#method-i-signed_id

### Proxy Mode

Optionally, files can be proxied instead. This means that your application servers will download file data from the storage service in response to requests. This can be useful for serving files from a CDN.

You can configure Active Storage to use proxying by default:

```ruby
# config/initializers/active_storage.rb
Rails.application.config.active_storage.resolve_model_to_route = :rails_storage_proxy
```

Or if you want to explicitly proxy specific attachments there are URL helpers you can use in the form of `rails_storage_proxy_path` and `rails_storage_proxy_url`.

```erb
<%= image_tag rails_storage_proxy_path(@user.avatar) %>
```

#### Putting a CDN in Front of Active Storage

Additionally, in order to use a CDN for Active Storage attachments, you will need to generate URLs with proxy mode so that they are served by your app and the CDN will cache the attachment without any extra configuration. This works out of the box because the default Active Storage proxy controller sets an HTTP header indicating to the CDN to cache the response.

You should also make sure that the generated URLs use the CDN host instead of your app host. There are multiple ways to achieve this, but in general it involves tweaking your `config/routes.rb` file so that you can generate the proper URLs for the attachments and their variations. As an example, you could add this:

```ruby
# config/routes.rb
direct :cdn_image do |model, options|
  expires_in = options.delete(:expires_in) { ActiveStorage.urls_expire_in }

  if model.respond_to?(:signed_id)
    route_for(
      :rails_service_blob_proxy,
      model.signed_id(expires_in: expires_in),
      model.filename,
      options.merge(host: ENV['CDN_HOST'])
    )
  else
    signed_blob_id = model.blob.signed_id(expires_in: expires_in)
    variation_key  = model.variation.key
    filename       = model.blob.filename

    route_for(
      :rails_blob_representation_proxy,
      signed_blob_id,
      variation_key,
      filename,
      options.merge(host: ENV['CDN_HOST'])
    )
  end
end
```

and then generate routes like this:

```erb
<%= cdn_image_url(user.avatar.variant(resize_to_limit: [128, 128])) %>
```

### Authenticated Controllers

All Active Storage controllers are publicly accessible by default. The generated
URLs use a plain [`signed_id`][ActiveStorage::Blob#signed_id], making them hard to
guess but permanent. Anyone that knows the blob URL will be able to access it,
even if a `before_action` in your `ApplicationController` would otherwise
require a login. If your files require a higher level of protection, you can
implement your own authenticated controllers, based on the
[`ActiveStorage::Blobs::RedirectController`][],
[`ActiveStorage::Blobs::ProxyController`][],
[`ActiveStorage::Representations::RedirectController`][] and
[`ActiveStorage::Representations::ProxyController`][]

To only allow an account to access their own logo you could do the following:

```ruby
# config/routes.rb
resource :account do
  resource :logo
end
```

```ruby
# app/controllers/logos_controller.rb
class LogosController < ApplicationController
  # Through ApplicationController:
  # include Authenticate, SetCurrentAccount

  def show
    redirect_to Current.account.logo.url
  end
end
```

```erb
<%= image_tag account_logo_path %>
```

And then you should disable the Active Storage default routes with:

```ruby
config.active_storage.draw_routes = false
```

to prevent files being accessed with the publicly accessible URLs.

[`ActiveStorage::Blobs::RedirectController`]: https://api.rubyonrails.org/classes/ActiveStorage/Blobs/RedirectController.html
[`ActiveStorage::Blobs::ProxyController`]: https://api.rubyonrails.org/classes/ActiveStorage/Blobs/ProxyController.html
[`ActiveStorage::Representations::RedirectController`]: https://api.rubyonrails.org/classes/ActiveStorage/Representations/RedirectController.html
[`ActiveStorage::Representations::ProxyController`]: https://api.rubyonrails.org/classes/ActiveStorage/Representations/ProxyController.html

Downloading Files
-----------------

Sometimes you need to process a blob after it’s uploaded—for example, to convert
it to a different format. Use the attachment's [`download`][Blob#download] method to read a blob’s
binary data into memory:

```ruby
binary = user.avatar.download
```

You might want to download a blob to a file on disk so an external program (e.g.
a virus scanner or media transcoder) can operate on it. Use the attachment's
[`open`][Blob#open] method to download a blob to a tempfile on disk:

```ruby
message.video.open do |file|
  system '/path/to/virus/scanner', file.path
  # ...
end
```

It's important to know that the file is not yet available in the `after_create` callback but in the `after_create_commit` only.

[Blob#download]: https://api.rubyonrails.org/classes/ActiveStorage/Blob.html#method-i-download
[Blob#open]: https://api.rubyonrails.org/classes/ActiveStorage/Blob.html#method-i-open

Analyzing Files
---------------

Active Storage analyzes files once they've been uploaded by queuing a job in Active Job. Analyzed files will store additional information in the metadata hash, including `analyzed: true`. You can check whether a blob has been analyzed by calling [`analyzed?`][] on it.

Image analysis provides `width` and `height` attributes. Video analysis provides these, as well as `duration`, `angle`, `display_aspect_ratio`, and `video` and `audio` booleans to indicate the presence of those channels. Audio analysis provides `duration` and `bit_rate` attributes.

[`analyzed?`]: https://api.rubyonrails.org/classes/ActiveStorage/Blob/Analyzable.html#method-i-analyzed-3F

Displaying Images, Videos, and PDFs
---------------

Active Storage supports representing a variety of files. You can call
[`representation`][] on an attachment to display an image variant, or a
preview of a video or PDF. Before calling `representation`, check if the
attachment can be represented by calling [`representable?`]. Some file formats
can't be previewed by Active Storage out of the box (e.g. Word documents); if
`representable?` returns false you may want to [link to](#serving-files)
the file instead.

```erb
<ul>
  <% @message.files.each do |file| %>
    <li>
      <% if file.representable? %>
        <%= image_tag file.representation(resize_to_limit: [100, 100]) %>
      <% else %>
        <%= link_to rails_blob_path(file, disposition: "attachment") do %>
          <%= image_tag "placeholder.png", alt: "Download file" %>
        <% end %>
      <% end %>
    </li>
  <% end %>
</ul>
```

Internally, `representation` calls `variant` for images, and `preview` for
previewable files. You can also call these methods directly.

[`representable?`]: https://api.rubyonrails.org/classes/ActiveStorage/Blob/Representable.html#method-i-representable-3F
[`representation`]: https://api.rubyonrails.org/classes/ActiveStorage/Blob/Representable.html#method-i-representation

### Lazy vs Immediate Loading

By default, Active Storage will process representations lazily. This code:

```ruby
image_tag file.representation(resize_to_limit: [100, 100])
```

Will generate an `<img>` tag with the `src` pointing to the
[`ActiveStorage::Representations::RedirectController`][]. The browser will
make a request to that controller, which will perform the following:

1. Process file and upload the processed file if necessary.
2. Return a `302` redirect to the file either to
  * the remote service (e.g., S3).
  * or `ActiveStorage::Blobs::ProxyController` which will return the file contents if [proxy mode](#proxy-mode) is enabled.

Loading the file lazily allows features like [single use URLs](#public-access)
to work without slowing down your initial page loads.

This works fine for most cases.

If you want to generate URLs for images immediately, you can call `.processed.url`:

```ruby
image_tag file.representation(resize_to_limit: [100, 100]).processed.url
```

The Active Storage variant tracker improves performance of this, by storing a
record in the database if the requested representation has been processed before.
Thus, the above code will only make an API call to the remote service (e.g. S3)
once, and once a variant is stored, will use that. The variant tracker runs
automatically, but can be disabled through [`config.active_storage.track_variants`][].

If you're rendering lots of images on a page, the above example could result
in N+1 queries loading all the variant records. To avoid these N+1 queries,
use the named scopes on [`ActiveStorage::Attachment`][].

```ruby
message.images.with_all_variant_records.each do |file|
  image_tag file.representation(resize_to_limit: [100, 100]).processed.url
end
```

[`config.active_storage.track_variants`]: configuring.html#config-active-storage-track-variants
[`ActiveStorage::Representations::RedirectController`]: https://api.rubyonrails.org/classes/ActiveStorage/Representations/RedirectController.html
[`ActiveStorage::Attachment`]: https://api.rubyonrails.org/classes/ActiveStorage/Attachment.html

### Transforming Images

Transforming images allows you to display the image at your choice of dimensions.
To create a variation of an image, call [`variant`][] on the attachment. You
can pass any transformation supported by the variant processor to the method.
When the browser hits the variant URL, Active Storage will lazily transform
the original blob into the specified format and redirect to its new service
location.

```erb
<%= image_tag user.avatar.variant(resize_to_limit: [100, 100]) %>
```

If a variant is requested, Active Storage will automatically apply
transformations depending on the image's format:

1. Content types that are variable (as dictated by [`config.active_storage.variable_content_types`][])
  and not considered web images (as dictated by [`config.active_storage.web_image_content_types`][]),
  will be converted to PNG.

2. If `quality` is not specified, the variant processor's default quality for the format will be used.

Active Storage can use either [Vips][] or MiniMagick as the variant processor.
The default depends on your `config.load_defaults` target version, and the
processor can be changed by setting [`config.active_storage.variant_processor`][].

The parameters available are defined by the [`image_processing`][] gem and depend on the
variant processor that you are using, but both support the following parameters:

| Parameter      | Example | Description |
| ------------------- | ---------------- | ----- |
| `resize_to_limit` | `resize_to_limit: [100, 100]` | Downsizes the image to fit within the specified dimensions while retaining the original aspect ratio. Will only resize the image if it's larger than the specified dimensions. |
| `resize_to_fit` | `resize_to_fit: [100, 100]` | Resizes the image to fit within the specified dimensions while retaining the original aspect ratio. Will downsize the image if it's larger than the specified dimensions or upsize if it's smaller. |
| `resize_to_fill` | `resize_to_fill: [100, 100]` | Resizes the image to fill the specified dimensions while retaining the original aspect ratio. If necessary, will crop the image in the larger dimension. |
| `resize_and_pad` | `resize_and_pad: [100, 100]` | Resizes the image to fit within the specified dimensions while retaining the original aspect ratio. If necessary, will pad the remaining area with transparent color if source image has alpha channel, black otherwise. |
| `crop` | `crop: [20, 50, 300, 300]` | Extracts an area from an image. The first two arguments are the left and top edges of area to extract, while the last two arguments are the width and height of the area to extract. |
| `rotate` | `rotate: 90` | Rotates the image by the specified angle. |

[`image_processing`][] has all parameters available in it's own documentation
for both the
[Vips](https://github.com/janko/image_processing/blob/master/doc/vips.md) and
[MiniMagick](https://github.com/janko/image_processing/blob/master/doc/minimagick.md)
processors.

Some parameters, including those listed above, accept additional processor
specific options which can be passed as `key: value` pairs inside a hash:

```erb
<!-- Vips supports configuring `crop` for many of its transformations -->
<%= image_tag user.avatar.variant(resize_to_fill: [100, 100, { crop: :centre }]) %>
```

If migrating an existing application between MiniMagick and Vips, processor
specific options will need to be updated:

```erb
<!-- MiniMagick -->
<%= image_tag user.avatar.variant(resize_to_limit: [100, 100], format: :jpeg, sampling_factor: "4:2:0", strip: true, interlace: "JPEG", colorspace: "sRGB", quality: 80) %>

<!-- Vips -->
<%= image_tag user.avatar.variant(resize_to_limit: [100, 100], format: :jpeg, saver: { subsample_mode: "on", strip: true, interlace: true, quality: 80 }) %>
```

[`config.active_storage.variable_content_types`]: configuring.html#config-active-storage-variable-content-types
[`config.active_storage.variant_processor`]: configuring.html#config-active-storage-variant-processor
[`config.active_storage.web_image_content_types`]: configuring.html#config-active-storage-web-image-content-types
[`variant`]: https://api.rubyonrails.org/classes/ActiveStorage/Blob/Representable.html#method-i-variant
[Vips]: https://www.rubydoc.info/gems/ruby-vips/Vips/Image
[`image_processing`]: https://github.com/janko/image_processing

### Previewing Files

Some non-image files can be previewed: that is, they can be presented as images.
For example, a video file can be previewed by extracting its first frame. Out of
the box, Active Storage supports previewing videos and PDF documents. To create
a link to a lazily-generated preview, use the attachment's [`preview`][] method:

```erb
<%= image_tag message.video.preview(resize_to_limit: [100, 100]) %>
```

To add support for another format, add your own previewer. See the
[`ActiveStorage::Preview`][] documentation for more information.

[`preview`]: https://api.rubyonrails.org/classes/ActiveStorage/Blob/Representable.html#method-i-preview
[`ActiveStorage::Preview`]: https://api.rubyonrails.org/classes/ActiveStorage/Preview.html

Direct Uploads
--------------

Active Storage, with its included JavaScript library, supports uploading
directly from the client to the cloud.

### Usage

1. Include `activestorage.js` in your application's JavaScript bundle.

    Using the asset pipeline:

    ```js
    //= require activestorage
    ```

    Using the npm package:

    ```js
    import * as ActiveStorage from "@rails/activestorage"
    ActiveStorage.start()
    ```

2. Add `direct_upload: true` to your [file field](form_helpers.html#uploading-files):

    ```erb
    <%= form.file_field :attachments, multiple: true, direct_upload: true %>
    ```

    Or, if you aren't using a `FormBuilder`, add the data attribute directly:

    ```erb
    <input type="file" data-direct-upload-url="<%= rails_direct_uploads_url %>" />
    ```

3. Configure CORS on third-party storage services to allow direct upload requests.

4. That's it! Uploads begin upon form submission.

### Cross-Origin Resource Sharing (CORS) Configuration

To make direct uploads to a third-party service work, you’ll need to configure the service to allow cross-origin requests from your app. Consult the CORS documentation for your service:

* [S3](https://docs.aws.amazon.com/AmazonS3/latest/dev/cors.html#how-do-i-enable-cors)
* [Google Cloud Storage](https://cloud.google.com/storage/docs/configuring-cors)
* [Azure Storage](https://docs.microsoft.com/en-us/rest/api/storageservices/cross-origin-resource-sharing--cors--support-for-the-azure-storage-services)

Take care to allow:

* All origins from which your app is accessed
* The `PUT` request method
* The following headers:
  * `Content-Type`
  * `Content-MD5`
  * `Content-Disposition` (except for Azure Storage)
  * `x-ms-blob-content-disposition` (for Azure Storage only)
  * `x-ms-blob-type` (for Azure Storage only)
  * `Cache-Control` (for GCS, only if `cache_control` is set)

No CORS configuration is required for the Disk service since it shares your app’s origin.

#### Example: S3 CORS Configuration

```json
[
  {
    "AllowedHeaders": [
      "Content-Type",
      "Content-MD5",
      "Content-Disposition"
    ],
    "AllowedMethods": [
      "PUT"
    ],
    "AllowedOrigins": [
      "https://www.example.com"
    ],
    "MaxAgeSeconds": 3600
  }
]
```

#### Example: Google Cloud Storage CORS Configuration

```json
[
  {
    "origin": ["https://www.example.com"],
    "method": ["PUT"],
    "responseHeader": ["Content-Type", "Content-MD5", "Content-Disposition"],
    "maxAgeSeconds": 3600
  }
]
```

#### Example: Azure Storage CORS Configuration

```xml
<Cors>
  <CorsRule>
    <AllowedOrigins>https://www.example.com</AllowedOrigins>
    <AllowedMethods>PUT</AllowedMethods>
    <AllowedHeaders>Content-Type, Content-MD5, x-ms-blob-content-disposition, x-ms-blob-type</AllowedHeaders>
    <MaxAgeInSeconds>3600</MaxAgeInSeconds>
  </CorsRule>
</Cors>
```

### Direct Upload JavaScript Events

| Event name | Event target | Event data (`event.detail`) | Description |
| --- | --- | --- | --- |
| `direct-uploads:start` | `<form>` | None | A form containing files for direct upload fields was submitted. |
| `direct-upload:initialize` | `<input>` | `{id, file}` | Dispatched for every file after form submission. |
| `direct-upload:start` | `<input>` | `{id, file}` | A direct upload is starting. |
| `direct-upload:before-blob-request` | `<input>` | `{id, file, xhr}` | Before making a request to your application for direct upload metadata. |
| `direct-upload:before-storage-request` | `<input>` | `{id, file, xhr}` | Before making a request to store a file. |
| `direct-upload:progress` | `<input>` | `{id, file, progress}` | As requests to store files progress. |
| `direct-upload:error` | `<input>` | `{id, file, error}` | An error occurred. An `alert` will display unless this event is canceled. |
| `direct-upload:end` | `<input>` | `{id, file}` | A direct upload has ended. |
| `direct-uploads:end` | `<form>` | None | All direct uploads have ended. |

### Example

You can use these events to show the progress of an upload.

![direct-uploads](https://user-images.githubusercontent.com/5355/28694528-16e69d0c-72f8-11e7-91a7-c0b8cfc90391.gif)

To show the uploaded files in a form:

```js
// direct_uploads.js

addEventListener("direct-upload:initialize", event => {
  const { target, detail } = event
  const { id, file } = detail
  target.insertAdjacentHTML("beforebegin", `
    <div id="direct-upload-${id}" class="direct-upload direct-upload--pending">
      <div id="direct-upload-progress-${id}" class="direct-upload__progress" style="width: 0%"></div>
      <span class="direct-upload__filename"></span>
    </div>
  `)
  target.previousElementSibling.querySelector(`.direct-upload__filename`).textContent = file.name
})

addEventListener("direct-upload:start", event => {
  const { id } = event.detail
  const element = document.getElementById(`direct-upload-${id}`)
  element.classList.remove("direct-upload--pending")
})

addEventListener("direct-upload:progress", event => {
  const { id, progress } = event.detail
  const progressElement = document.getElementById(`direct-upload-progress-${id}`)
  progressElement.style.width = `${progress}%`
})

addEventListener("direct-upload:error", event => {
  event.preventDefault()
  const { id, error } = event.detail
  const element = document.getElementById(`direct-upload-${id}`)
  element.classList.add("direct-upload--error")
  element.setAttribute("title", error)
})

addEventListener("direct-upload:end", event => {
  const { id } = event.detail
  const element = document.getElementById(`direct-upload-${id}`)
  element.classList.add("direct-upload--complete")
})
```

Add styles:

```css
/* direct_uploads.css */

.direct-upload {
  display: inline-block;
  position: relative;
  padding: 2px 4px;
  margin: 0 3px 3px 0;
  border: 1px solid rgba(0, 0, 0, 0.3);
  border-radius: 3px;
  font-size: 11px;
  line-height: 13px;
}

.direct-upload--pending {
  opacity: 0.6;
}

.direct-upload__progress {
  position: absolute;
  top: 0;
  left: 0;
  bottom: 0;
  opacity: 0.2;
  background: #0076ff;
  transition: width 120ms ease-out, opacity 60ms 60ms ease-in;
  transform: translate3d(0, 0, 0);
}

.direct-upload--complete .direct-upload__progress {
  opacity: 0.4;
}

.direct-upload--error {
  border-color: red;
}

input[type=file][data-direct-upload-url][disabled] {
  display: none;
}
```

### Custom drag and drop solutions

You can use the `DirectUpload` class for this purpose. Upon receiving a file from your library
of choice, instantiate a DirectUpload and call its create method. Create takes
a callback to invoke when the upload completes.

```js
import { DirectUpload } from "@rails/activestorage"

const input = document.querySelector('input[type=file]')

// Bind to file drop - use the ondrop on a parent element or use a
//  library like Dropzone
const onDrop = (event) => {
  event.preventDefault()
  const files = event.dataTransfer.files;
  Array.from(files).forEach(file => uploadFile(file))
}

// Bind to normal file selection
input.addEventListener('change', (event) => {
  Array.from(input.files).forEach(file => uploadFile(file))
  // you might clear the selected files from the input
  input.value = null
})

const uploadFile = (file) => {
  // your form needs the file_field direct_upload: true, which
  //  provides data-direct-upload-url
  const url = input.dataset.directUploadUrl
  const upload = new DirectUpload(file, url)

  upload.create((error, blob) => {
    if (error) {
      // Handle the error
    } else {
      // Add an appropriately-named hidden input to the form with a
      //  value of blob.signed_id so that the blob ids will be
      //  transmitted in the normal upload flow
      const hiddenField = document.createElement('input')
      hiddenField.setAttribute("type", "hidden");
      hiddenField.setAttribute("value", blob.signed_id);
      hiddenField.name = input.name
      document.querySelector('form').appendChild(hiddenField)
    }
  })
}
```

### Track the progress of the file upload

When using the `DirectUpload` constructor, it is possible to include a third parameter.
This will allow the `DirectUpload` object to invoke the `directUploadWillStoreFileWithXHR`
method during the upload process.
You can then attach your own progress handler to the XHR to suit your needs.

```js
import { DirectUpload } from "@rails/activestorage"

class Uploader {
  constructor(file, url) {
    this.upload = new DirectUpload(file, url, this)
  }

  uploadFile(file) {
    this.upload.create((error, blob) => {
      if (error) {
        // Handle the error
      } else {
        // Add an appropriately-named hidden input to the form
        // with a value of blob.signed_id
      }
    })
  }

  directUploadWillStoreFileWithXHR(request) {
    request.upload.addEventListener("progress",
      event => this.directUploadDidProgress(event))
  }

  directUploadDidProgress(event) {
    // Use event.loaded and event.total to update the progress bar
  }
}
```

### Integrating with Libraries or Frameworks

Once you receive a file from the library you have selected, you need to create
a `DirectUpload` instance and use its "create" method to initiate the upload process,
adding any required additional headers as necessary. The "create" method also requires
a callback function to be provided that will be triggered once the upload has finished.

```js
import { DirectUpload } from "@rails/activestorage"

class Uploader {
  constructor(file, url, token) {
    const headers = { 'Authentication': `Bearer ${token}` }
    // INFO: Sending headers is an optional parameter. If you choose not to send headers,
    //       authentication will be performed using cookies or session data.
    this.upload = new DirectUpload(file, url, this, headers)
  }

  uploadFile(file) {
    this.upload.create((error, blob) => {
      if (error) {
        // Handle the error
      } else {
        // Use the with blob.signed_id as a file reference in next request
      }
    })
  }

  directUploadWillStoreFileWithXHR(request) {
    request.upload.addEventListener("progress",
      event => this.directUploadDidProgress(event))
  }

  directUploadDidProgress(event) {
    // Use event.loaded and event.total to update the progress bar
  }
}
```

To implement customized authentication, a new controller must be created on
the Rails application, similar to the following:

```ruby
class DirectUploadsController < ActiveStorage::DirectUploadsController
  skip_forgery_protection
  before_action :authenticate!

  def authenticate!
    @token = request.headers['Authorization']&.split&.last

    head :unauthorized unless valid_token?(@token)
  end
end
```

NOTE: Using [Direct Uploads](#direct-uploads) can sometimes result in a file that uploads, but never attaches to a record. Consider [purging unattached uploads](#purging-unattached-uploads).

Testing
-------------------------------------------

Use [`file_fixture_upload`][] to test uploading a file in an integration or controller test.
Rails handles files like any other parameter.

```ruby
class SignupController < ActionDispatch::IntegrationTest
  test "can sign up" do
    post signup_path, params: {
      name: "David",
      avatar: file_fixture_upload("david.png", "image/png")
    }

    user = User.order(:created_at).last
    assert user.avatar.attached?
  end
end
```

[`file_fixture_upload`]: https://api.rubyonrails.org/classes/ActionDispatch/TestProcess/FixtureFile.html#method-i-file_fixture_upload

### Discarding Files Created During Tests

#### System Tests

System tests clean up test data by rolling back a transaction. Because `destroy`
is never called on an object, the attached files are never cleaned up. If you
want to clear the files, you can do it in an `after_teardown` callback. Doing it
here ensures that all connections created during the test are complete and
you won't receive an error from Active Storage saying it can't find a file.

```ruby
class ApplicationSystemTestCase < ActionDispatch::SystemTestCase
  # ...
  def after_teardown
    super
    FileUtils.rm_rf(ActiveStorage::Blob.service.root)
  end
  # ...
end
```

If you're using [parallel tests][] and the `DiskService`, you should configure each process to use its own
folder for Active Storage. This way, the `teardown` callback will only delete files from the relevant process'
tests.

```ruby
class ApplicationSystemTestCase < ActionDispatch::SystemTestCase
  # ...
  parallelize_setup do |i|
    ActiveStorage::Blob.service.root = "#{ActiveStorage::Blob.service.root}-#{i}"
  end
  # ...
end
```

If your system tests verify the deletion of a model with attachments and you're
using Active Job, set your test environment to use the inline queue adapter so
the purge job is executed immediately rather at an unknown time in the future.

```ruby
# Use inline job processing to make things happen immediately
config.active_job.queue_adapter = :inline
```

[parallel tests]: testing.html#parallel-testing

#### Integration Tests

Similarly to System Tests, files uploaded during Integration Tests will not be
automatically cleaned up. If you want to clear the files, you can do it in an
`teardown` callback.

```ruby
class ActionDispatch::IntegrationTest
  def after_teardown
    super
    FileUtils.rm_rf(ActiveStorage::Blob.service.root)
  end
end
```

If you're using [parallel tests][] and the Disk service, you should configure each process to use its own
folder for Active Storage. This way, the `teardown` callback will only delete files from the relevant process'
tests.

```ruby
class ActionDispatch::IntegrationTest
  parallelize_setup do |i|
    ActiveStorage::Blob.service.root = "#{ActiveStorage::Blob.service.root}-#{i}"
  end
end
```

[parallel tests]: testing.html#parallel-testing

### Adding Attachments to Fixtures

You can add attachments to your existing [fixtures][]. First, you'll want to create a separate storage service:

```yml
# config/storage.yml

test_fixtures:
  service: Disk
  root: <%= Rails.root.join("tmp/storage_fixtures") %>
```

This tells Active Storage where to "upload" fixture files to, so it should be a temporary directory. By making it
a different directory to your regular `test` service, you can separate fixture files from files uploaded during a
test.

Next, create fixture files for the Active Storage classes:

```yml
# active_storage/attachments.yml
david_avatar:
  name: avatar
  record: david (User)
  blob: david_avatar_blob
```

```yml
# active_storage/blobs.yml
david_avatar_blob: <%= ActiveStorage::FixtureSet.blob filename: "david.png", service_name: "test_fixtures" %>
```

Then put a file in your fixtures directory (the default path is `test/fixtures/files`) with the corresponding filename.
See the [`ActiveStorage::FixtureSet`][] docs for more information.

Once everything is set up, you'll be able to access attachments in your tests:

```ruby
class UserTest < ActiveSupport::TestCase
  def test_avatar
    avatar = users(:david).avatar

    assert avatar.attached?
    assert_not_nil avatar.download
    assert_equal 1000, avatar.byte_size
  end
end
```

#### Cleaning up Fixtures

While files uploaded in tests are cleaned up [at the end of each test](#discarding-files-created-during-tests),
you only need to clean up fixture files once: when all your tests complete.

If you're using parallel tests, call `parallelize_teardown`:

```ruby
class ActiveSupport::TestCase
  # ...
  parallelize_teardown do |i|
    FileUtils.rm_rf(ActiveStorage::Blob.services.fetch(:test_fixtures).root)
  end
  # ...
end
```

If you're not running parallel tests, use `Minitest.after_run` or the equivalent for your test
framework (e.g. `after(:suite)` for RSpec):

```ruby
# test_helper.rb

Minitest.after_run do
  FileUtils.rm_rf(ActiveStorage::Blob.services.fetch(:test_fixtures).root)
end
```

[fixtures]: testing.html#the-low-down-on-fixtures
[`ActiveStorage::FixtureSet`]: https://api.rubyonrails.org/classes/ActiveStorage/FixtureSet.html

### Configuring services

You can add `config/storage/test.yml` to configure services to be used in test environment
This is useful when the `service` option is used.

```ruby
class User < ApplicationRecord
  has_one_attached :avatar, service: :s3
end
```

Without `config/storage/test.yml`, the `s3` service configured in `config/storage.yml` is used - even when running tests.

The default configuration would be used and files would be uploaded to the service provider configured in `config/storage.yml`.

In this case, you can add `config/storage/test.yml` and use Disk service for `s3` service to prevent sending requests.

```yaml
test:
  service: Disk
  root: <%= Rails.root.join("tmp/storage") %>

s3:
  service: Disk
  root: <%= Rails.root.join("tmp/storage") %>
```

Implementing Support for Other Cloud Services
---------------------------------------------

If you need to support a cloud service other than these, you will need to
implement the Service. Each service extends
[`ActiveStorage::Service`](https://api.rubyonrails.org/classes/ActiveStorage/Service.html)
by implementing the methods necessary to upload and download files to the cloud.

Purging Unattached Uploads
--------------------------

There are cases where a file is uploaded but never attached to a record. This can happen when using [Direct Uploads](#direct-uploads). You can query for unattached records using the [unattached scope](https://github.com/rails/rails/blob/8ef5bd9ced351162b673904a0b77c7034ca2bc20/activestorage/app/models/active_storage/blob.rb#L49). Below is an example using a [custom rake task](command_line.html#custom-rake-tasks).

```ruby
namespace :active_storage do
  desc "Purges unattached Active Storage blobs. Run regularly."
  task purge_unattached: :environment do
    ActiveStorage::Blob.unattached.where(created_at: ..2.days.ago).find_each(&:purge_later)
  end
end
```

WARNING: The query generated by `ActiveStorage::Blob.unattached` can be slow and potentially disruptive on applications with larger databases.