#!/bin/bash
#
# Linux/MacOS X script to install rEFInd
#
# Usage:
#
# ./refind-install [options]
#
# options include:
#    "--notesp" to install to the OS X root filesystem rather than to the ESP.
#           This option is valid only under OS X.
#    "--usedefault {devicefile}" to install as default
#           (/EFI/BOOT/BOOTX64.EFI and similar) to the specified device
#           (/dev/sdd1 or whatever) without registering with the NVRAM.
#    "--ownhfs {devicefile}" to install to an HFS+ volume that's NOT currently
#           an OS X boot volume. Valid only in OS X.
#    "--root {dir}" to specify installation using the specified directory
#           as the system's root
#    "--alldrivers" to install all drivers along with regular files
#    "--nodrivers" to suppress driver installation (default in Linux is
#           driver used on /boot; --nodrivers is OS X default).
#    "--shim {shimfile}" to install a shim.efi file for Secure Boot. Valid
#           only under Linux.
#    "--preloader" is synonymous with "--shim". Valid only under Linux.
#    "--encryptkeys" password-protects the Secure Boot private key.
#    "--localkeys" to re-sign x86-64 binaries with a locally-generated key.
#           Valid only under Linux.
#    "--keepname" to keep refind_x64.efi name as such even when using shim.
#           Valid only under Linux.
#    "--yes" to assume a "yes" response to all prompts
#
# This program is copyright (c) 2012-2020 by Roderick W. Smith
#
# This program is licensed under the terms of the GNU GPL, version 3,
# or (at your option) any later version.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.

# Revision history:
#
# 0.12.0  -- Improve code to find ESPs; should help with NVMe drives. Also
#            activate install and bootorder features when using --usedefault
#            option.
# 0.11.5  -- Remove excessive slashes (/) from some filenames
# 0.11.4  -- Fixed generation of GUID when automount of ESP in use on Linux
# 0.11.3  -- Added support for ESP mounted at /efi under Linux
# 0.11.1  -- In Linux, be less aggressive about replacing existing NVRAM entries
# 0.11.0  -- Create BOOT.CSV file and option to encrypt SB private key
# 0.10.8  -- Enabled use of shimx64.efi.signed as Shim source file
# 0.10.7  -- Added mm{arch}.efi as equivalent of MokManager.efi
# 0.10.6  -- Improved identification of the root device under macOS.
# 0.10.5  -- More improvement to handling of disks (other than /dev/[sh]d? disks).
# 0.10.4  -- Improved handling of disks (other than /dev/[sh]d? disks).
# 0.10.2  -- Improved Secure Boot detection in Linux, fixed --usedefault in OS X,
#            and fixed bug that could cause mountesp to be installed as a FILE
#            called /usr/local/bin in OS X.
# 0.10.1  -- Improve extraction of default kernel options from /proc/cmdline.
#            Add support for AMD64 (aka AARCH64, aa64) platform. Added
#            warning when --alldrivers used without --usedefault.
# 0.10.0  -- Enable running under OS X's recovery system & add warning about
#            SIP & brief instructions on how to deal with it if SIP is
#            detected to be enabled. Also change way refind_linux.conf default
#            options are found; use /proc/cmdline as base.
# 0.9.2   -- Added --keepname option.
# 0.8.7   -- Better detection of Secure Boot mode & fixed errors when copying
#            Shim & MokManager files over themselves; fixed bug that caused
#            inappropriate installation to EFI/BOOT/bootx64.efi
# 0.8.6   -- Fixed bugs that caused misidentification of ESP on disks with
#            partition numbers over 10 on OS X and misidentification of mount
#            point if already-mounted ESP had space in path.
# 0.8.5   -- Refinement/cleanup of new OS X ESP-as-default policy
# 0.8.4   -- OS X default changed to install to ESP under /EFI/BOOT
# 0.7.9   -- Fixed bug that caused errors if dmraid utility not installed
# 0.7.7   -- Fixed bug that created mangled refind_linux.conf file; added ability
#            to locate and mount ESP on Linux, if it's not mounted
# 0.7.6   -- Added --ownhfs {device-filename} option
# 0.7.5   -- Fixed bug when installing to ESP on recent versions of OS X
# 0.7.2   -- Fixed code that could be confused by use of autofs to mount the ESP
# 0.7.0   -- Added support for the new Btrfs driver
# 0.6.12  -- Added support for PreLoader as well as for shim
# 0.6.11  -- Improvements in script's ability to handle directories with spaces
#            in their names
# 0.6.9   -- Install gptsync on Macs
# 0.6.8   -- Bug fix: ESP scan now uses "uniq".
# 0.6.6   -- Bug fix: Upgrade drivers when installed to EFI/BOOT. Also enable
#            copying shim.efi and MokManager.efi over themselves.
# 0.6.4   -- Copies ext2 driver rather than ext4 driver for ext2/3fs
# 0.6.3   -- Support for detecting rEFInd in EFI/BOOT and EFI/Microsoft/Boot
#            directories & for installing to EFI/BOOT in BIOS mode
# 0.6.2-1 -- Added --yes option & tweaked key-copying for use with RPM install script
# 0.6.1   -- Added --root option; minor bug fixes
# 0.6.0   -- Changed --drivers to --alldrivers and added --nodrivers option;
#            changed default driver installation behavior in Linux to install
#            the driver needed to read /boot (if available)
# 0.5.1.2 -- Fixed bug that caused failure to generate refind_linux.conf file
# 0.5.1.1 -- Fixed bug that caused script failure under OS X
# 0.5.1   -- Added --shim & --localkeys options & create sample refind_linux.conf
#            in /boot
# 0.5.0   -- Added --usedefault & --drivers options & changed "esp" option to "--esp"
# 0.4.5   -- Fixed check for rEFItBlesser in OS X
# 0.4.2   -- Added notice about BIOS-based OSes & made NVRAM changes in Linux smarter
# 0.4.1   -- Added check for rEFItBlesser in OS X
# 0.3.3.1 -- Fixed OS X 10.7 bug; also works as make target
# 0.3.2.1 -- Check for presence of source files; aborts if not present
# 0.3.2   -- Initial version
#
# Note: install.sh version numbers match those of the rEFInd package
# with which they first appeared.

RootDir="/"
TargetDir=/EFI/refind
LocalKeysBase="refind_local"
ShimSource="none"
ShimType="none"
KeepName=0
TargetShim="default"
TargetX64="refind_x64.efi"
TargetIA32="refind_ia32.efi"
LocalKeys=0
EncryptKeys=0
DeleteRefindDir=0
AlwaysYes=0
EspGuid="C12A7328-F81F-11D2-BA4B-00A0C93EC93B"

#
# Functions used by both OS X and Linux....
#

GetParams() {
   InstallToEspOnMac=1
   # Install the driver required to read Linux /boot, if it's available
   # Note: Under OS X, this will be installed only if a Linux partition
   # is detected, in which case the ext4fs driver will be installed.
   InstallDrivers="boot"
   while [[ $# -gt 0 ]]; do
      case $1 in
         --notesp) InstallToEspOnMac=0
              ;;
         --ownhfs) OwnHfs=1
              InstallToEspOnMac=0
              TargetPart="$2"
              TargetDir=/System/Library/CoreServices
              shift
              ;;
         --usedefault) TargetDir=/EFI/BOOT
              TargetPart="$2"
              TargetX64="bootx64.efi"
              TargetIA32="bootia32.efi"
              shift
              ;;
         --root) RootDir="$2"
              InstallToEspOnMac=0
              shift
              ;;
         --localkeys) LocalKeys=1
              ;;
         --encryptkeys) EncryptKeys=1
              ;;
         --shim | --preloader) ShimSource="$2"
              ShimType=`basename $ShimSource`
              shift
              ;;
         --keepname) KeepName=1
              ;;
         --drivers | --alldrivers) InstallDrivers="all"
              ;;
         --nodrivers) InstallDrivers="none"
              ;;
         --yes) AlwaysYes=1
              ;;
         * ) echo "Usage: $0 [--notesp | --usedefault {device-file} | --root {dir} |"
             echo "                     --ownhfs {device-file} ] [--keepname]"
             echo "                  [--nodrivers | --alldrivers] [--shim {shimfile}]"
             echo "                  [--localkeys [--encryptkeys]] [--keepname] [--yes]"
             exit 1
      esac
      shift
   done
   if [[ "$InstallToEspOnMac" == 0 && "$RootDir" == '/' && "$TargetDir" == '/EFI/BOOT' ]] ; then
      echo "You may use --notesp OR --usedefault, but not both! Aborting!"
      exit 1
   fi
   if [[ "$RootDir" != '/' && "$TargetDir" == '/EFI/BOOT' ]] ; then
      echo "You may use --root OR --usedefault, but not both! Aborting!"
      exit 1
   fi
   if [[ "$TargetDir" != '/System/Library/CoreServices' && "$OwnHfs" == '1' ]] ; then
      echo "If you use --ownhfs, you may NOT use --usedefault! Aborting!"
      exit 1
   fi
   if [[ "$KeepName" == 1 && "$ShimSource" == "none" ]] ; then
      echo "The --keepname option is meaningful only in conjunction with --shim"
      echo "or --preloader! Aborting!"
      exit 1
   fi
   if [[ "$KeepName" == 1 && "$OSTYPE" != "linux" && "$OSTYPE" != "linux-gnu" ]] ; then
      echo "The --keepname option is valid only under Linux! Aborting!"
      exit 1
   fi
   if [[ "$KeepName" == 1 && "$TargetDir" == "/EFI/BOOT" ]] ; then
      echo "The --keepname option is incompatible with --usedefault! Aborting!"
      exit 1
   fi
   if [[ "$InstallDrivers" == "all" && "$TargetDir" != "/EFI/BOOT" ]] ; then
      echo "The --alldrivers option is meant for creating USB flash drives with (near-)"
      echo "universal boot support. Using it on a hard disk partition runs the risk of"
      echo "creating serious problems, up to and including rendering your computer"
      echo -n "unbootable. Are you SURE you want to proceed (Y/N)? "
      ReadYesNo
      if [[ "$YesNo" != "Y" && "$YesNo" != "y" ]] ; then
         echo "Aborting installation!"
         exit 0
      fi
   fi
   if [[ "$EncryptKeys" == 1 && "$LocalKeys" == 0 ]] ; then
      echo "The --encryptkeys option requires the use of --localkeys! Aborting!"
      exit 1
   fi
   RLConfFile="$RootDir/boot/refind_linux.conf"
   EtcKeysDir="$RootDir/etc/refind.d/keys"
} # GetParams()

# Get a yes/no response from the user and place it in the YesNo variable.
# If the AlwaysYes variable is set to 1, skip the user input and set "Y"
# in the YesNo variable.
ReadYesNo() {
   if [[ $AlwaysYes == 1 ]] ; then
      YesNo="Y"
      echo "Y"
   else
      read YesNo
   fi
}


# Get a passphrase for decrpyting a private key, and store it in the
# KeyPassphrase variable.
#   $1   Set to "--no-confirm" to skip passphrase input confirmation.
ReadKeyPassphrase() {
   if [[ $EncryptKeys == 1 ]]  && [ -z "$KeyPassphrase" ]; then
      while true; do
         echo -n "Private key passphrase (no echo): "
         read -r -s
         KeyPassphrase="$REPLY"
         REPLY="shred value"
         echo
         if [ "$1" == "--no-confirm" ]; then
            break
         else
            echo -n "Confirm passphrase (no echo): "
            read -r -s
            echo
            if [ "$KeyPassphrase" == "$REPLY" ]; then
               REPLY="shred value"
               break
            fi
         fi
      done
   fi
}

# Determine what CPU type and EFI bit depth we're using.
# Sets Platform global variable to lowercase EFI platform code (currently
# "x64", "ia32", or "aa64") -- the same code used in filenames.
DeterminePlatform() {
   local CpuType
   case "$OSTYPE" in
   darwin*)
      CpuType=`ioreg -l -p IODeviceTree | grep firmware-abi | cut -d "\"" -f 4`
      if [[ "$CpuType" == EFI32 ]] ; then
         Platform="ia32"
      else
         Platform="x64"
      fi
      ;;
   linux*)
      CpuType=`uname -m`
      case "$CpuType" in
      aarch64)
         Platform="aa64"
         ;;
      x86_64)
         Platform="x64"
         ;;
      i?86)
         Platform="ia32"
         # If we're in EFI mode, do some sanity checks, and alert the user or even
         # abort. Not in BIOS mode, though, since that could be used on an emergency
         # disc to try to recover a troubled Linux installation.
         if [[ -d /sys/firmware/efi ]] ; then
            if [[ "$ShimSource" != "none" && "$TargetDir" != "/BOOT/EFI" ]] ; then
               echo ""
               echo "CAUTION: shim does not currently supports 32-bit systems, so you should not"
               echo "use the --shim option to install on such systems. Aborting!"
               echo ""
               exit 1
            fi
            echo
            echo "CAUTION: This Linux installation uses a 32-bit kernel. 32-bit EFI-based"
            echo "computers are VERY RARE. If you've installed a 32-bit version of Linux"
            echo "on a 64-bit computer, you should manually install the 64-bit version of"
            echo "rEFInd. If you're positive you want to continue with this installation,"
            echo "answer 'Y' to the following question..."
            echo
            echo -n "Are you sure you want to continue (Y/N)? "
            ReadYesNo
            if [[ $YesNo == "Y" || $YesNo == "y" ]] ; then
               echo "OK; continuing with the installation..."
            else
               exit 0
            fi
         fi # In EFI mode
         ;;
      *)
         echo "Unknown CPU type '$CpuType'; aborting!"
         exit 1
         ;;
      esac # case "$CpuType"....
      ;;
   *)
      echo "Unknown OS; aborting!"
      exit 1
      ;;
   esac # case "$OSTYPE"....
} # DeterminePlatform()

# Abort if the rEFInd files can't be found.
# Also sets $ConfFile to point to the configuration file,
# $IconsDir to point to the icons directory,
# $ShimSource to the source of the shim.efi file (if necessary),
# $ThisDir to point to the directory in which this script resides,
# and $RefindDir to point to where the rEFInd binaries live
CheckForFiles() {
   # Note: $ThisDir points to real (not symlinked) script home on Linux,
   # enabling creating a symlink in /usr/sbin (or wherever); but on OS X,
   # "readlink" doesn't do the same thing as under Linux, so the script
   # must not be a symlink under OS X.
   case "$OSTYPE" in
      darwin*)
           ThisDir="$( cd -P "${BASH_SOURCE%/*}" && pwd )"
           ;;
      linux*)
           ThisDir="$(dirname "$(readlink -f "$0")")"
           ;;
   esac
   RefindDir="$ThisDir/refind"

   if [[ ! -f "$RefindDir/refind_$Platform.efi" ]] ; then
      echo "The rEFInd binary file is missing! Aborting installation!"
      exit 1
   fi

   if [[ -f "$RefindDir/refind.conf-sample" ]] ; then
      ConfFile="$RefindDir/refind.conf-sample"
   elif [[ -f "$ThisDir/refind.conf-sample" ]] ; then
      ConfFile="$ThisDir/refind.conf-sample"
   else
      echo "The sample configuration file is missing! Aborting installation!"
      exit 1
   fi

   if [[ -d "$RefindDir/icons" ]] ; then
      IconsDir="$RefindDir/icons"
   elif [[ -d "$ThisDir/icons" ]] ; then
      IconsDir="$ThisDir/icons"
   else
      echo "The icons directory is missing! Aborting installation!"
      exit 1
   fi

   echo "ShimSource is $ShimSource"
   if [[ "$ShimSource" != "none" ]] ; then
      if [[ -f "$ShimSource" ]] ; then
         if [[ $ShimType == "shimx64.efi" || $ShimType == "shim.efi" || $ShimType == "shimx64.efi.signed" ]] ; then
            TargetX64="grubx64.efi"
            TargetAARCH64="grubaa64.efi"
            MokManagerSource=`dirname "$ShimSource"`/mm$Platform.efi.signed
            if [[ ! -f "$MokManagerSource" ]] ; then
                MokManagerSource=`dirname "$ShimSource"`/mm$Platform.efi
            fi
            if [[ ! -f "$MokManagerSource" ]] ; then
                MokManagerSource=`dirname "$ShimSource"`/MokManager.efi
            fi
         elif [[ $ShimType == "preloader.efi" || $ShimType == "PreLoader.efi" ]] ; then
            TargetX64="loader.efi"
            MokManagerSource=`dirname "$ShimSource"`/HashTool.efi
         else
            echo "Unknown shim/PreBootloader filename: $ShimType!"
            echo "Known filenames are shimx64.efi, shim.efi, and PreLoader.efi. Aborting!"
            exit 1
         fi
      else
         echo "The specified shim/PreBootloader file, $ShimSource, doesn't exist!"
         echo "Aborting installation!"
         exit 1
      fi
   fi
} # CheckForFiles()

# Helper for CopyRefindFiles; copies shim files (including MokManager, if it's
# available) to target.
CopyShimFiles() {
   local inode1=`ls -i "$ShimSource" 2> /dev/null | cut -f 1 -d " "`
   local inode2=`ls -i "$InstallDir/$TargetDir/$TargetShim" 2> /dev/null | cut -f 1 -d " "`
   if [[ $inode1 != $inode2 ]] ; then
      cp -fb "$ShimSource" "$InstallDir/$TargetDir/$TargetShim"
      if [[ $? != 0 ]] ; then
         Problems=1
      fi
   fi
   inode1=`ls -i "$MokManagerSource" 2> /dev/null | cut -f 1 -d " "`
   local TargetMMName=`basename $MokManagerSource`
   if [[ $TargetMMName == "mm$Platform.efi.signed" ]] ; then
       TargetMMName="mm$Platform.efi"
   fi
   inode2=`ls -i "$InstallDir/$TargetDir/$TargetMMName" 2> /dev/null | cut -f 1 -d " "`
   if [[ $inode1 != $inode2 ]] ; then
      if [[ -f "$MokManagerSource" ]] ; then
         cp -fb "$MokManagerSource" "$InstallDir/$TargetDir/$TargetMMName"
      fi
      if [[ $? != 0 ]] ; then
         Problems=1
      fi
   fi
} # CopyShimFiles()

# Copy the public keys to the installation medium
CopyKeys() {
   if [[ $LocalKeys == 1 ]] ; then
      mkdir -p "$InstallDir/$TargetDir/keys/"
      cp "$EtcKeysDir/$LocalKeysBase.cer" "$InstallDir/$TargetDir/keys/"
      cp "$EtcKeysDir/$LocalKeysBase.crt" "$InstallDir/$TargetDir/keys/"
   fi
} # CopyKeys()

# Set varaibles for installation in EFI/BOOT directory
SetVarsForBoot() {
   TargetDir="/EFI/BOOT"
   if [[ $ShimSource == "none" ]] ; then
      TargetX64="bootx64.efi"
      TargetIA32="bootia32.efi"
      TargetAARCH64="bootaa64.efi"
   else
      if [[ $ShimType == "shim.efi" || $ShimType == "shimx64.efi" || $ShimType == "shimx64.efi.signed" || $ShimType = "shimaa64.efi" ]] ; then
         TargetX64="grubx64.efi"
         TargetAARCH64="grubaa64.efi"
      elif [[ $ShimType == "preloader.efi" || $ShimType == "PreLoader.efi" ]] ; then
         TargetX64="loader.efi"
      else
         echo "Unknown shim/PreBootloader type: $ShimType"
         echo "Aborting!"
         exit 1
      fi
      TargetIA32="bootia32.efi"
      TargetShim="boot$Platform.efi"
   fi
   if [[ $KeepName == 1 ]] ; then
      echo "Installation is to /EFI/BOOT, which is incompatible with --keepname! Aborting!"
      exit 1
   fi
} # SetVarsForBoot()

# Set variables for installation in EFI/Microsoft/Boot directory
SetVarsForMsBoot() {
   TargetDir="/EFI/Microsoft/Boot"
   if [[ $ShimSource == "none" ]] ; then
      TargetX64="bootmgfw.efi"
      TargetIA32="bootmgfw.efi"
      TargetAARCH64="bootmgfw.efi"
   else
      if [[ $ShimType == "shim.efi" || $ShimType == "shimx64.efi" || $ShimType == "shimaa64.efi" ]] ; then
         TargetX64="grubx64.efi"
         TargetAARCH64="grubaa64.efi"
      elif [[ $ShimType == "preloader.efi" || $ShimType == "PreLoader.efi" ]] ; then
         TargetX64="loader.efi"
      else
         echo "Unknown shim/PreBootloader type: $ShimType"
         echo "Aborting!"
         exit 1
      fi
      TargetShim="bootmgfw.efi"
   fi
   if [[ $KeepName == 1 ]] ; then
      echo "Installation is to /EFI/Microsoft/Boot, which is incompatible with --keepname!"
      echo "Aborting!"
      exit 1
   fi
} # SetVarsForMsBoot()

# TargetDir defaults to /EFI/refind; however, this function adjusts it as follows:
# - If an existing refind.conf is available in /EFI/BOOT or /EFI/Microsoft/Boot,
#   install to that directory under the suitable name; but DO NOT do this if
#   refind.conf is also in /EFI/refind.
# - If booted in BIOS mode and the ESP lacks any other EFI files, install to
#   /EFI/BOOT
# - If booted in BIOS mode and there's no refind.conf file and there is a
#   /EFI/Microsoft/Boot/bootmgfw.efi file, move it down one level and
#   install under that name, "hijacking" the Windows boot loader filename
DetermineTargetDir() {
   Upgrade=0

   if [[ -f $InstallDir/EFI/BOOT/refind.conf && ! -f $InstallDir/EFI/refind/refind.conf ]] ; then
      SetVarsForBoot
      Upgrade=1
   fi
   if [[ -f $InstallDir/EFI/Microsoft/Boot/refind.conf && ! -f $InstallDir/EFI/refind/refind.conf ]] ; then
      SetVarsForMsBoot
      Upgrade=1
   fi
   if [[ -f $InstallDir/EFI/refind/refind.conf ]] ; then
      TargetDir="/EFI/refind"
      if [[ $ShimSource == "none" || $KeepName == 1 ]] ; then
         TargetX64="refind_x64.efi"
         TargetIA32="refind_ia32.efi"
         TargetAARCH64="refind_aa64.efi"
      fi
      Upgrade=1
   fi
   if [[ $Upgrade == 1 ]] ; then
      echo "Found rEFInd installation in $InstallDir$TargetDir; upgrading it."
   fi

   if [[ ! -d /sys/firmware/efi && ! $OSTYPE == darwin* && $Upgrade == 0 ]] ; then     # BIOS-mode
      FoundEfiFiles=`find "$InstallDir/EFI/BOOT" -name "*.efi" 2> /dev/null`
      FoundConfFiles=`find "$InstallDir" -name "refind\.conf" 2> /dev/null`
      if [[ ! -n "$FoundConfFiles" && -f "$InstallDir/EFI/Microsoft/Boot/bootmgfw.efi" ]] ; then
         mv -n "$InstallDir/EFI/Microsoft/Boot/bootmgfw.efi" "$InstallDir/EFI/Microsoft" &> /dev/null
         SetVarsForMsBoot
         echo "Running in BIOS mode with a suspected Windows installation; moving boot loader"
         echo "files so as to install to $InstallDir$TargetDir."
      elif [[ ! -n "$FoundEfiFiles" ]] ; then  # In BIOS mode and no default loader; install as default loader
         SetVarsForBoot
         echo "Running in BIOS mode with no existing default boot loader; installing to"
         echo $InstallDir$TargetDir
      else
         echo "Running in BIOS mode with an existing default boot loader; backing it up and"
         echo "installing rEFInd in its place."
         if [[ -d "$InstallDir/EFI/BOOT-rEFIndBackup" ]] ; then
            echo ""
            echo "Caution: An existing backup of a default boot loader exists! If the current"
            echo "default boot loader and the backup are different boot loaders, the current"
            echo "one will become inaccessible."
            echo ""
            echo -n "Do you want to proceed with installation (Y/N)? "
            ReadYesNo
            if [[ $YesNo == "Y" || $YesNo == "y" ]] ; then
               echo "OK; continuing with the installation..."
            else
               exit 0
            fi
         fi
         mv -n "$InstallDir/EFI/BOOT" "$InstallDir/EFI/BOOT-rEFIndBackup"
         SetVarsForBoot
      fi
   fi # BIOS-mode
} # DetermineTargetDir()

# Determine (or guess) the filesystem used on the Linux /boot filesystem.
# Store the result in the BootFS global variable.
SetBootFS() {
   BootFS=""
   case "$OSTYPE" in
      linux*)
           if command -v blkid &>/dev/null; then
              BootPart=`df $RootDir/boot | grep dev | cut -f 1 -d " "`
              BootFS=`blkid -o export $BootPart 2> /dev/null | grep TYPE= | cut -f 2 -d =`
           fi
           ;;
      darwin*)
           # 0FC63DAF-8483-4772-8E79-3D69D8477DE4 = Linux filesystem
           # BC13C2FF-59E6-4262-A352-B275FD6F7172 = Freedesktop $boot partition
           # 933AC7E1-2EB4-4F13-B844-0E14E2AEF915 = Freedesktop Linux /home
           # E6D6D379-F507-44C2-A23C-238F2A3DF928 = Linux LVM
           # A19D880F-05FC-4D3B-A006-743F0F84911E = Linux RAID
           # 0657FD6D-A4AB-43C4-84E5-0933C84B4F4F = Linux swap
           Temp=$(diskutil list | grep -i '0FC63DAF-8483-4772-8E79-3D69D8477DE4\|BC13C2FF-59E6-4262-A352-B275FD6F7172\|933AC7E1-2EB4-4F13-B844-0E14E2AEF915\|E6D6D379-F507-44C2-A23C-238F2A3DF928\|A19D880F-05FC-4D3B-A006-743F0F84911E\|0657FD6D-A4AB-43C4-84E5-0933C84B4F4F\|Linux')
           BootFS=""
           if [[ -n $Temp ]] ; then
              echo "Found suspected Linux partition(s); installing ext4fs driver."
              BootFS="ext4"
           fi
           ;;
   esac
} # SetBootFS()

# Copy drivers from $RefindDir/drivers_$1 to $InstallDir/$TargetDir/drivers_$1,
# honoring the $InstallDrivers condition. Must be passed a suitable
# architecture code (ia32 or x64).
CopyDrivers() {
   if [[ $InstallDrivers == "all" ]] ; then
      mkdir -p "$InstallDir/$TargetDir/drivers_$1"
      cp "$ThisDir"/drivers_$1/*_$1.efi "$InstallDir/$TargetDir/drivers_$1/" 2> /dev/null
      cp "$RefindDir"/drivers_$1/*_$1.efi "$InstallDir/$TargetDir/drivers_$1/" 2> /dev/null
   elif [[ "$InstallDrivers" == "boot" ]] ; then
      SetBootFS
      DriverType=""
      case $BootFS in
         ext2 | ext3) DriverType="ext2"
              # Could use ext4, but that can create unwanted entries from symbolic
              # links in / to /boot/vmlinuz if a separate /boot partition is used.
              ;;
         ext4) DriverType="ext4"
              ;;
         reiserfs) DriverType="reiserfs"
              ;;
         btrfs) DriverType="btrfs"
              ;;
         hfsplus) DriverType="hfs"
              ;;
         ntfs) DriverType="ntfs"
              ;;
         *) BootFS=""
      esac
      if [[ -n $BootFS ]] ; then
         echo "Installing driver for $BootFS (${DriverType}_$1.efi)"
         mkdir -p "$InstallDir/$TargetDir/drivers_$1"
         cp "$ThisDir/drivers_$1/${DriverType}_$1.efi" "$InstallDir/$TargetDir/drivers_$1/" 2> /dev/null
         cp "$RefindDir/drivers_$1/${DriverType}_$1.efi" "$InstallDir/$TargetDir/drivers_$1"/ 2> /dev/null
      fi
   fi
} # CopyDrivers()

# Copy tools (currently only gptsync, and that only on Macs) to the EFI/tools
# directory on the ESP. Must be passed a suitable architecture code (ia32
# or x64).
CopyTools() {
   mkdir -p "$InstallDir/EFI/tools"
   if [[ $OSTYPE == darwin* ]] ; then
      cp -f "$RefindDir/tools_$1/gptsync_$1.efi" "$InstallDir/EFI/tools/"
      if [[ -f "$InstallDir/EFI/tools/gptsync.efi" ]] ; then
         mv "$InstallDir/EFI/tools/gptsync.efi" "$InstallDir/EFI/tools/gptsync.efi-disabled"
         echo "Found old gptsync.efi; disabling it by renaming it to gptsync.efi-disabled"
      fi
   fi
} # CopyTools()

# Copy the rEFInd files to the ESP or OS X root partition.
# Sets Problems=1 if any critical commands fail.
CopyRefindFiles() {
   mkdir -p "$InstallDir/$TargetDir"
   if [[ "$TargetDir" == '/EFI/BOOT' ]] ; then
      cp "$RefindDir/refind_ia32.efi" "$InstallDir/$TargetDir/$TargetIA32" 2> /dev/null
      if [[ $? != 0 ]] ; then
         echo "Note: IA32 (x86) binary not installed!"
      fi
      cp "$RefindDir/refind_x64.efi" "$InstallDir/$TargetDir/$TargetX64" 2> /dev/null
      if [[ $? != 0 ]] ; then
         Problems=1
      fi
      cp "$RefindDir/refind_aa64.efi" "$InstallDir/$TargetDir/$TargetAARCH64" 2> /dev/null
      if [[ $? != 0 && $Platform == "aa64" ]] ; then
         Problems=1
      fi
      if [[ "$ShimSource" != "none" ]] ; then
         TargetShim="bootx64.efi"
         CopyShimFiles
      fi
      if [[ $InstallDrivers == "all" ]] ; then
         cp -r "$RefindDir"/drivers_* "$InstallDir/$TargetDir/" 2> /dev/null
         cp -r "$ThisDir"/drivers_* "$InstallDir/$TargetDir/" 2> /dev/null
      elif [[ $Upgrade == 1 || $InstallToEspOnMac == 1 ]] ; then
         CopyDrivers "$Platform"
         CopyTools "$Platform"
      fi
      Refind="boot$Platform.efi"
      CopyKeys
   elif [[ $Platform == 'x64' || $TargetDir == "/EFI/Microsoft/Boot" ]] ; then
      cp "$RefindDir/refind_x64.efi" "$InstallDir/$TargetDir/$TargetX64"
      if [[ $? != 0 ]] ; then
         Problems=1
      fi
      CopyDrivers x64
      CopyTools x64
      Refind="refind_x64.efi"
      CopyKeys
      if [[ "$ShimSource" != "none" ]] ; then
         if [[ "$TargetShim" == "default" ]] ; then
            TargetShim=`basename "$ShimSource"`
         fi
         CopyShimFiles
         Refind="$TargetShim"
         if [[ $LocalKeys == 0 ]] ; then
            echo "Storing copies of rEFInd Secure Boot public keys in $EtcKeysDir"
            mkdir -p "$EtcKeysDir"
            cp "$ThisDir/keys/refind.cer" "$EtcKeysDir" 2> /dev/null
            cp "$ThisDir/keys/refind.crt" "$EtcKeysDir" 2> /dev/null
         fi
      fi
      if [[ "$TargetDir" == '/System/Library/CoreServices' ]] ; then
         SetupMacHfs $TargetX64
      fi
   elif [[ $Platform == 'ia32' || $Platform == 'aa64' ]] ; then
      if [[ $Platform == 'ia32' ]] ; then
         cp "$RefindDir/refind_ia32.efi" "$InstallDir/$TargetDir/$TargetIA32"
         if [[ $? != 0 ]] ; then
            Problems=1
         fi
      else
         cp "$RefindDir/refind_aa64.efi" "$InstallDir/$TargetDir/$TargetAARCH64"
         if [[ $? != 0 ]] ; then
            Problems=1
         fi
      fi
      CopyDrivers $Platform
      CopyTools $Platform
      Refind="refind_$Platform.efi"
      if [[ "$TargetDir" == '/System/Library/CoreServices' ]] ; then
         SetupMacHfs $TargetIA32
      fi
   else
      echo "Unknown platform! Aborting!"
      exit 1
   fi
   echo "Copied rEFInd binary files"
   echo ""
   if [[ -d "$InstallDir/$TargetDir/icons" ]] ; then
      rm -rf "$InstallDir/$TargetDir/icons-backup" &> /dev/null
      mv -f "$InstallDir/$TargetDir/icons" "$InstallDir/$TargetDir/icons-backup"
      echo "Notice: Backed up existing icons directory as icons-backup."
   fi
   cp -r "$IconsDir" "$InstallDir/$TargetDir"
   if [[ $? != 0 ]] ; then
      Problems=1
   fi
   mkdir -p "$InstallDir/$TargetDir/keys"
   cp -rf "$ThisDir"/keys/*.[cd]er "$InstallDir/$TargetDir/keys/" 2> /dev/null
   cp -rf "$EtcKeysDir"/*.[cd]er "$InstallDir/$TargetDir/keys/" 2> /dev/null
   if [[ -f "$InstallDir/$TargetDir/refind.conf" ]] ; then
      echo "Existing refind.conf file found; copying sample file as refind.conf-sample"
      echo "to avoid overwriting your customizations."
      echo ""
      cp -f "$ConfFile" "$InstallDir/$TargetDir"
      if [[ $? != 0 ]] ; then
         Problems=1
      fi
   else
      echo "Copying sample configuration file as refind.conf; edit this file to configure"
      echo "rEFInd."
      echo ""
      cp -f "$ConfFile" "$InstallDir/$TargetDir/refind.conf"
      if [[ $? != 0 ]] ; then
         Problems=1
      fi
   fi
   # If installing to the fallback/EFI default filename, make a duplicate copy
   # of refind.conf and edit the main copy to include the "install" and "bootorder"
   # options, so that the system can be used to install rEFInd if it's on a USB
   # flash drive or CD-R....
   if [[ "$TargetDir" == '/EFI/BOOT' ]] ; then
      cp -f "$ConfFile" "$InstallDir/$TargetDir/refind.conf-sample"
      sed -i 's/#showtools shell/showtools install, shell/g' "$InstallDir/$TargetDir/refind.conf"
   fi
   if [[ $DeleteRefindDir == 1 ]] ; then
      echo "Deleting the temporary directory $RefindDir"
      rm -r "$RefindDir"
   fi
} # CopyRefindFiles()

# Mount the partition the user specified with the --usedefault or --ownhfs option
MountDefaultTarget() {
   InstallDir=/tmp/refind_install
   mkdir -p "$InstallDir"
   UnmountEsp=1
   if [[ $OSTYPE == darwin* ]] ; then
      if [[ $OwnHfs == '1' ]] ; then
         Temp=`diskutil info "$TargetPart" | grep "Mount Point"`
         InstallDir=`echo $Temp | cut -f 3-30 -d ' ' | sed 's/\/\+/\//g'`
         if [[ $InstallDir == '' ]] ; then
            InstallDir=/tmp/refind_install
            mount -t hfs "$TargetPart" "$InstallDir"
         else
            UnmountEsp=0
         fi
      else
         mount -t msdos "$TargetPart" "$InstallDir"
      fi
   elif [[ $OSTYPE == linux* ]] ; then
      mount -t vfat "$TargetPart" "$InstallDir"
   fi
   if [[ $? != 0 ]] ; then
      echo "Couldn't mount $TargetPart ! Aborting!"
      rmdir "$InstallDir"
      exit 1
   fi
} # MountDefaultTarget()

# Create a BOOT.CSV file in the same directory as rEFInd, to help in recovery
# should the system's boot entry list be lost
CreateBootCsvFile() {
   IConv=`which iconv 2> /dev/null`
   if [[ -x "$IConv" ]] ; then
      if [[ "$Platform" == "x64" && -d "$InstallDir/$TargetDir" ]] ; then
         echo "$TargetX64,rEFInd Boot Manager,,This is the boot entry for rEFInd" | \
              $IConv -t UCS-2 > "$InstallDir/$TargetDir/BOOT.CSV"
      fi
      if [[ "$Platform" == "ia32" && -d "$InstallDir/$TargetDir" ]] ; then
         echo "$TargetIA32,rEFInd Boot Manager,,This is the boot entry for rEFInd" | \
              $IConv -t UCS-2 > "$InstallDir/$TargetDir/BOOT.CSV"
      fi
      if [[ "$Platform" == "aarch64" && -d "$InstallDir/$TargetDir" ]] ; then
         echo "$TargetAARCH64,rEFInd Boot Manager,,This is the boot entry for rEFInd" | \
              $IConv -t UCS-2 > "$InstallDir/$TargetDir/BOOT.CSV"
      fi
   fi
   exit
} # CreateBootCsvFile()

#
# A series of OS X support functions....
#

# Mount the ESP at /Volumes/ESP or determine its current mount
# point.
# Sets InstallDir to the ESP mount point
# Sets UnmountEsp if we mounted it
MountOSXESP() {
   # Identify the ESP. Note: This returns the FIRST ESP found;
   # if the system has multiple disks, this could be wrong!
   Temp=$(mount | sed -n -E "/^(\/dev\/disk.*) on \/ \(.*$/s//\1/p")
   if [ $Temp ]; then
      Temp=$(diskutil list | grep " EFI " | grep -o 'disk.*' | head -n 1)
      if [ -z $Temp ]; then
         echo "Warning: root device doesn't have an EFI System Partition"
      fi
   else
      echo "Warning: root device could not be found"
   fi
   if [ -z $Temp ]; then
      Temp=$(diskutil list | sed -n -E '/^ *[0-9]+:[ ]+EFI EFI[ ]+[0-9.]+ [A-Z]+[ ]+(disk[0-9]+s[0-9]+)$/ { s//\1/p
             q
         }' )

      if [ -z $Temp ]; then
         echo "Could not find an EFI System Partition. Aborting!"
         exit 1
      fi
   fi
   Esp=/dev/`echo $Temp`
   # If the ESP is mounted, use its current mount point....
   Temp=`df -P | grep "$Esp "`
   InstallDir=`echo $Temp | cut -f 6- -d ' ' | sed 's/\/\+/\//g'`
   if [[ "$InstallDir" == '' ]] ; then
      mkdir /Volumes/ESP &> /dev/null
      mount -t msdos "$Esp" /Volumes/ESP
      # Some systems have HFS+ "ESPs." They shouldn't, but they do. If this is
      # detected, mount it as such and set appropriate options.
      if [[ $? != 0 ]] ; then
         mount -t hfs "$Esp" /Volumes/Esp
         OwnHfs=1
         InstallToEspOnMac=0
         if [[ $? != 0 ]] ; then
            echo "Unable to mount ESP! Aborting!\n"
            exit 1
         fi
      fi
      UnmountEsp=1
      InstallDir="/Volumes/ESP"
   fi
} # MountOSXESP()

# Set up for booting from Mac HFS+ volume that boots rEFInd in MJG's way
# (http://mjg59.dreamwidth.org/7468.html)
# Must be passed the original rEFInd binary filename (without a path).
SetupMacHfs() {
   if [[ -s "$InstallDir/mach_kernel" ]] ; then
      echo "Attempt to install rEFInd to a partition with a /mach_kernel file! Aborting!"
      exit 1
   fi
   cp -n "$InstallDir/$TargetDir/boot.efi" "$InstallDir/$TargetDir/boot.efi-backup" &> /dev/null
   ln -f "$InstallDir/$TargetDir/$1" "$InstallDir/$TargetDir/boot.efi"
   touch "$InstallDir/mach_kernel"
   rm "$InstallDir/$TargetDir/SystemVersion.plist" &> /dev/null
   cat - << ENDOFHERE >> "$InstallDir/$TargetDir/SystemVersion.plist"
<xml version="1.0" encoding="UTF-8"?>
<plist version="1.0">
<dict>
        <key>ProductBuildVersion</key>
        <string></string>
        <key>ProductName</key>
        <string>rEFInd</string>
        <key>ProductVersion</key>
        <string>0.12.0</string>
</dict>
</plist>
ENDOFHERE
} # SetupMacHfs()

CheckForSIP() {
   if [[ -x "/usr/bin/csrutil" && -z "$TargetPart" ]] ; then
      local OKToInstall=`/usr/bin/csrutil status | \
                         grep "Protection status: disabled\|enabled (Apple Internal)\|NVRAM Protections: disabled"`
      if [[ -z "$OKToInstall" ]] ; then
         echo
         echo "**** ALERT: SIP ENABLED! ****"
         echo
         if [[ "$Upgrade" == "1" ]] ; then
            echo "You are attempting to upgrade an existing installation, but it appears that"
            echo "System Integrity Protection (SIP) is enabled. If rEFInd is working now, then"
            echo "this is fine; you can upgrade your existing rEFInd. If rEFInd is not working,"
            echo "though, re-installing from this boot will not help. To re-enable rEFInd, you"
            echo "must re-install it from a Recovery system or from another OS. To enter the"
            echo "Recovery system and re-install rEFInd:"
         else
            echo "rEFInd cannot be installed because System Integrity Protection (SIP) seems"
            echo "to be enabled! You must install rEFInd from your Recovery installation or"
            echo "from another OS. To install from the Recovery system:"
         fi
         echo
         echo "  1. Reboot"
         echo "  2. Hold down Command+R as the chime sounds"
         echo "  3. When the OS has booted, select Utilities->Terminal"
         echo "  4. Change to this directory with the 'cd' command; it will probably be under"
         if [[ "`pwd | cut -b 1-8`" == "/Volumes" ]] ; then
            echo "     `pwd`"
         else
            local RootName=`diskutil info -plist / | grep -A 1 VolumeName | grep string | cut -d \> -f 2 | cut -d \< -f 1`
            echo "     /Volumes/$RootName`pwd`"
         fi
         echo "  5. Re-run this script."
         echo
         if [[ "$Upgrade" != "1" ]] ; then
            echo "If you believe SIP is NOT enabled, you may attempt an installation anyhow,"
            echo "but it may fail."
            echo
         fi
         echo "For more on this subject, see http://www.rodsbooks.com/refind/sip.html"
         echo
         echo -n "Do you want to attempt installation (Y/N)? "
         ReadYesNo
         if [[ $YesNo == "N" || $YesNo == "n" ]] ; then
            echo "Exiting!"
            exit
         fi
      fi # csrutil status suggests OK to install
   fi # csrutil exists
} # CheckForSIP()

# Control the OS X installation.
# Sets Problems=1 if problems found during the installation.
InstallOnOSX() {
   echo "Installing rEFInd on macOS...."
   if [[ "$InstallToEspOnMac" == "1" && -z "$TargetPart" ]] ; then
      MountOSXESP
   elif [[ "$TargetDir" == "/EFI/BOOT" || "$OwnHfs" == '1' ]] ; then
      MountDefaultTarget
   else
      InstallDir="$RootDir/"
      InstallDir=`echo $InstallDir  | sed 's/\/\+/\//g'`
   fi
   echo "Installing rEFInd to the partition mounted at $InstallDir"
   DetermineTargetDir
   CheckForSIP
   CopyRefindFiles
   mkdir -p /usr/local/bin &> /dev/null
   cp "$ThisDir/mountesp" /usr/local/bin/ &> /dev/null
   if [[ $InstallToEspOnMac == "1" && -z "$TargetPart" ]] ; then
      bless --mount "$InstallDir" --setBoot --file "$InstallDir/$TargetDir/$Refind" --shortform
   elif [[ "$TargetDir" != "/EFI/BOOT" ]] ; then
      bless --setBoot --folder "$InstallDir/$TargetDir" --file "$InstallDir/$TargetDir/$Refind"
   fi
   if [[ $? != 0 ]] ; then
      Problems=1
   fi
   if [[ -f /Library/StartupItems/rEFItBlesser || -d /Library/StartupItems/rEFItBlesser ]] ; then
      echo
      echo "/Library/StartupItems/rEFItBlesser found!"
      echo "This program is part of rEFIt, and will cause rEFInd to fail to work after"
      echo -n "its first boot. Do you want to remove rEFItBlesser (Y/N)? "
      ReadYesNo
      if [[ $YesNo == "Y" || $YesNo == "y" ]] ; then
         echo "Deleting /Library/StartupItems/rEFItBlesser..."
         rm -r /Library/StartupItems/rEFItBlesser
      else
         echo "Not deleting rEFItBlesser."
      fi
   fi
} # InstallOnOSX()


#
# Now a series of Linux support functions....
#

# Check for evidence that we're running in Secure Boot mode. If so, and if
# appropriate options haven't been set, warn the user and offer to abort.
# If we're NOT in Secure Boot mode but the user HAS specified the --shim
# or --localkeys option, warn the user and offer to abort.
CheckSecureBoot() {
   IsSecureBoot="0"
   if [[ -f /sys/firmware/efi/efivars/SecureBoot-8be4df61-93ca-11d2-aa0d-00e098032b8c ]] ; then
      IsSecureBoot=`od -An -t u1 /sys/firmware/efi/efivars/SecureBoot-8be4df61-93ca-11d2-aa0d-00e098032b8c | awk '{print substr($0,length,1)}'`
   elif [[ -f /sys/firmware/efi/vars/SecureBoot-8be4df61-93ca-11d2-aa0d-00e098032b8c/data ]] ; then
      IsSecureBoot=`od -An -t u1 /sys/firmware/efi/vars/SecureBoot-8be4df61-93ca-11d2-aa0d-00e098032b8c/data | tr -d '[[:space:]]'`
   fi
   if [[ $IsSecureBoot == "1" && "$TargetDir" != '/EFI/BOOT' && "$ShimSource" == "none" ]] ; then
      echo ""
      echo "CAUTION: Your computer appears to be booted with Secure Boot, but you haven't"
      echo "specified a valid shim.efi file source. Chances are you should re-run with"
      echo "the --shim option. You can read more about this topic at"
      echo "http://www.rodsbooks.com/refind/secureboot.html."
      echo ""
      echo -n "Do you want to proceed with installation (Y/N)? "
      ReadYesNo
      if [[ $YesNo == "Y" || $YesNo == "y" ]] ; then
         echo "OK; continuing with the installation..."
      else
         exit 0
      fi
   fi

   if [[ "$ShimSource" != "none" && ! $IsSecureBoot == "1" ]] ; then
      echo ""
      echo "You've specified installing using a shim.efi file, but your computer does not"
      echo "appear to be running in Secure Boot mode. Although installing in this way"
      echo "should work, it's unnecessarily complex. You may continue, but unless you"
      echo "plan to enable Secure Boot, you should consider stopping and omitting the"
      echo "--shim option. You can read more about this topic at"
      echo "http://www.rodsbooks.com/refind/secureboot.html."
      echo ""
      echo -n "Do you want to proceed with installation (Y/N)? "
      ReadYesNo
      if [[ $YesNo == "Y" || $YesNo == "y" ]] ; then
         echo "OK; continuing with the installation..."
      else
         exit 0
      fi
   fi

   if [[ $LocalKeys != 0 && ! $IsSecureBoot == "1" ]] ; then
      echo ""
      echo "You've specified re-signing your rEFInd binaries with locally-generated keys,"
      echo "but your computer does not appear to be running in Secure Boot mode. The"
      echo "keys you generate will be useless unless you enable Secure Boot. You may"
      echo "proceed with this installation, but before you do so, you may want to read"
      echo "more about it at http://www.rodsbooks.com/refind/secureboot.html."
      echo ""
      echo -n "Do you want to proceed with installation (Y/N)? "
      ReadYesNo
      if [[ $YesNo == "Y" || $YesNo == "y" ]] ; then
         echo "OK; continuing with the installation..."
      else
         exit 0
      fi
   fi

} # CheckSecureBoot()

# Check for the presence of locally-generated keys from a previous installation in
# $EtcKeysDir (/etc/refind.d/keys). If they're not present, generate them using
# openssl.
GenerateKeys() {
   PrivateKey="$EtcKeysDir/$LocalKeysBase.key"
   CertKey="$EtcKeysDir/$LocalKeysBase.crt"
   DerKey="$EtcKeysDir/$LocalKeysBase.cer"
   OpenSSL=`which openssl 2> /dev/null`

   # Do the work only if one or more of the necessary keys is missing
   # TODO: Technically, we don't need the DerKey; but if it's missing and openssl
   # is also missing, this will fail. This could be improved.
   if [[ ! -f "$PrivateKey" || ! -f "$CertKey" || ! -f "$DerKey" ]] ; then
      echo "Generating a fresh set of local keys...."
      mkdir -p "$EtcKeysDir"
      chmod 0700 "$EtcKeysDir"
      if [[ ! -x "$OpenSSL" ]] ; then
         echo "Can't find openssl, which is required to create your private signing keys!"
         echo "Aborting!"
         exit 1
      fi
      if [[ -f "$PrivateKey" ]] ; then
         echo "Backing up existing $PrivateKey"
         cp -f "$PrivateKey" "$PrivateKey.backup" 2> /dev/null
      fi
      if [[ -f "$CertKey" ]] ; then
         echo "Backing up existing $CertKey"
         cp -f "$CertKey" "$CertKey.backup" 2> /dev/null
      fi
      if [[ -f "$DerKey" ]] ; then
         echo "Backing up existing $DerKey"
         cp -f "$DerKey" "$DerKey.backup" 2> /dev/null
      fi
      if [[ $EncryptKeys == 1 ]]; then
         KeyEncryptionArgument=""
      else
         KeyEncryptionArgument="-nodes"
      fi
      "$OpenSSL" req -new -x509 -newkey rsa:2048 -keyout "$PrivateKey" -out "$CertKey" \
                     $KeyEncryptionArgument -days 3650 -subj "/CN=Locally-generated rEFInd key/"
      "$OpenSSL" x509 -in "$CertKey" -out "$DerKey" -outform DER
      chmod 0600 "$PrivateKey"
   else
      echo "Using existing local keys...."
   fi
} # GenerateKeys()

# Sign a single binary. Requires parameters:
#   $1 = source file
#   $2 = destination file
# Also assumes that the SBSign and various key variables are set appropriately.
# Aborts script on error
SignOneBinary() {
   ReadKeyPassphrase --no-confirm
   if [[ "$EncryptKeys" == 1 ]] ; then
      SbSignCommand=$(printf "%q " "$SBSign" --key "$PrivateKey" --cert "$CertKey" --output "$2" "$1")
      echo "$KeyPassphrase" |
         script -qefc "$SbSignCommand" --force /dev/null 2>&1 | ( \
              head -n 2 >/dev/null # Skip the first two lines (incl. passphrase).
              grep -v "data remaining.*gaps between PE/COFF sections"
            )
       local status="${PIPESTATUS[1]}"
   else
      "$SBSign" --key "$PrivateKey" --cert "$CertKey" --output "$2" "$1" 2>&1 >/dev/null | \
                grep -v "data remaining.*gaps between PE/COFF sections"
      local status="${PIPESTATUS[0]}"
   fi
   if [[ "$status" != 0 ]] ; then
      echo "Problem signing the binary $1! Aborting!"
      exit 1
   fi
} # SignOneBinary()

# Re-sign the x86-64 binaries with a locally-generated key, First look for appropriate
# key files in $EtcKeysDir. If they're present, use them to re-sign the binaries. If
# not, try to generate new keys and store them in $EtcKeysDir.
ReSignBinaries() {
   SBSign=`which sbsign 2> /dev/null`
   echo "Found sbsign at $SBSign"
   TempDir="/tmp/refind_local"
   if [[ ! -x "$SBSign" ]] ; then
      echo "Can't find sbsign, which is required to sign rEFInd with your own keys!"
      echo "Aborting!"
      exit 1
   fi
   GenerateKeys
   mkdir -p "$TempDir/drivers_$Platform"
   cp "$RefindDir/refind.conf-sample $TempDir" 2> /dev/null
   cp "$ThisDir/refind.conf-sample $TempDir" 2> /dev/null
   cp "$RefindDir/refind_ia32.efi $TempDir" 2> /dev/null
   cp -a "$RefindDir/drivers_ia32 $TempDir" 2> /dev/null
   cp -a "$ThisDir/drivers_ia32 $TempDir" 2> /dev/null
   SignOneBinary "$RefindDir/refind_$Platform.efi" "$TempDir/refind_$Platform.efi"
   SaveIFS=$IFS
   IFS=$(echo -en "\n\b")
   for Driver in `ls "$RefindDir"/drivers_$Platform/*.efi "$ThisDir"/drivers_$Platform/*.efi 2> /dev/null` ; do
      TempName=`basename "$Driver"`
      SignOneBinary "$Driver" "$TempDir/drivers_$Platform/$TempName"
   done
   IFS=$SaveIFS
   RefindDir="$TempDir"
   DeleteRefindDir=1
} # ReSignBinaries()

# Locate and mount an ESP, if possible. Should be called only if /boot/efi
# is NOT an acceptable ESP. If successful, sets:
# * InstallDir to the mounted ESP's path ($RootDir/boot/efi)
# * EspFilesystem to the filesystem (always "vfat")
# Neither variable is altered if no ESP could be found
FindLinuxESP() {
   local Dmraid
   local DmStatus
   local FatPart
   local IsItRaid
   local ParentDisk
   local PartNum
   local PotentialParent
   local Sgdisk
   local TypeCode

   echo "The ESP doesn't seem to be mounted! Trying to find it...."
   Dmraid=`which dmraid 2> /dev/null`
   Sgdisk=`which sgdisk 2> /dev/null`
   if [[ ! -x "$Sgdisk" ]] ; then
      echo "The sgdisk program (part of the gdisk package) is not installed; please"
      echo "install it and try again."
      exit 1
   fi
   # Iterate through all FAT partitions in the hopes of finding an ESP....
   # (Note: FatPart with be set to "/dev/{whatever}".)
   for FatPart in `blkid -t TYPE="vfat" -o device` ; do
      # For each FAT partition, find its parent disk device, since we need
      # the disk device and partition number as separate components to feed
      # to efibootmgr....
      # (Note: PotentialParent will be lacking "/dev/" prefix.)
      for PotentialParent in `lsblk | grep disk | cut -f 1 -d " "` ; do
         IsItRaid=0
         # Exclude anything that looks like it's on software RAID....
         if [[ -x "$Dmraid" ]] ; then
            DmStatus=`dmraid -r | grep $PotentialParent`
            if [ -n "$DmStatus" ] ; then
               echo "/dev/$PotentialParent seems to be part of a RAID array; skipping!"
               IsItRaid=1
            fi
         fi # if dmraid utility exists
         # If FAT partition is in the $PotentialParent disk & it's NOT part
         # of a software RAID setup, then we've found what we want; set it
         # and break out of the loop....
         if [[ $FatPart == *"/dev/$PotentialParent"* && $IsItRaid == 0 ]] ; then
            ParentDisk=$PotentialParent
            break
         fi
      done
      if [[ $IsItRaid == 0 ]] ; then
         PartNum=`grep -Eo '[0-9]{1,4}' <<< $FatPart | tail -n 1`
         TypeCode=`$Sgdisk -i $PartNum /dev/$ParentDisk | grep "GUID code"`
         shopt -s nocasematch
         if [[ $TypeCode == *$EspGuid* ]] ; then
             InstallDir="$RootDir/boot/efi"
             InstallDir=`echo $InstallDir | sed 's/\/\+/\//g'`
             echo "Mounting ESP ($FatPart) at $InstallDir"
             mkdir -p $InstallDir
             mount $FatPart $InstallDir
             EspFilesystem="vfat"
             shopt -u nocasematch
             break
         fi
         shopt -u nocasematch
      fi
   done
} # FindLinuxESP()

# Identifies the ESP's location (/boot, /boot/efi, /efi, or these locations
# under the directory specified by --root); aborts if the ESP isn't mounted at
# any of these locations.
# Sets InstallDir to the ESP mount point.
FindMountedESP() {
   mount /boot &> /dev/null
   mount /boot/efi &> /dev/null
   mount /efi &> /dev/null
   EspLine=`df "$RootDir/efi" 2> /dev/null | grep efi`
   if [[ ! -n "$EspLine" ]] ; then
      EspLine=`df "$RootDir"/boot/efi 2> /dev/null | grep boot/efi`
   fi
   if [[ ! -n "$EspLine" ]] ; then
      EspLine=`df "$RootDir"/boot 2> /dev/null | grep boot`
   fi
   InstallDir=`echo $EspLine | cut -d " " -f 6 | sed 's/\/\+/\//g'`

   if [[ -n "$InstallDir" ]] ; then
      EspFilesystem=`grep -w "$InstallDir" /etc/mtab | uniq | grep -v autofs | cut -d " " -f 3 | uniq`
   fi
   if [[ $EspFilesystem != 'vfat' ]] ; then
      FindLinuxESP
   fi
   if [[ $EspFilesystem != 'vfat' ]] ; then
      echo "$RootDir/$InstallDir doesn't seem to be on a VFAT filesystem. The ESP must be"
      echo "mounted at $RootDir/boot, $RootDir/efi, or $RootDir/boot/efi, and it must be"
      echo "VFAT (not msdos)! Aborting!"
      if [[ -d /sys/firmware/efi ]] ; then
         exit 1
      else
         echo "The computer appears to be running in BIOS mode and has no ESP. You should"
         echo "create an ESP, and ideally boot in EFI mode, before installing rEFInd."
         exit 0
      fi
   fi
   echo "ESP was found at $InstallDir using $EspFilesystem"
} # FindMountedESP

# Uses efibootmgr to add an entry for rEFInd to the EFI's NVRAM, if necessary.
# If this fails, sets Problems=1
AddBootEntry() {
   local PartNum
   local InstallDisk
   local InstallPart
   local InstallPartGuid
   local Name
   local ExistingEntry
   local KeepExistingEntry=0
   local ExistingEntryBootNum
   local FirstBoot

   Efibootmgr=`which efibootmgr 2> /dev/null`
   if [[ "$Efibootmgr" ]] ; then
      InstallPart=`grep "$InstallDir " /etc/mtab | grep -v autofs | cut -d " " -f 1 | tail -n1`
      for Name in `lsblk -r | grep disk | cut -f 1 -d " "` ; do
         if [[ $InstallPart == *"$Name"* ]] ; then
            InstallDisk="/dev/"$Name
            PartNum=${InstallPart#$InstallDisk}
            PartNum=`echo "${PartNum//[!0-9]/}"`
            break
         fi
      done
      if [[ -z $InstallDisk || -z $PartNum ]] ; then
         echo "Could not identify ESP in AddBootEntry()!"
         Problems=1
         return 1
      fi
      EntryFilename="$TargetDir/$Refind"
      EfiEntryFilename=`echo ${EntryFilename//\//\\\}`
      EfiEntryFilename2=`echo ${EfiEntryFilename} | sed s/\\\\\\\\/\\\\\\\\\\\\\\\\/g`
      InstallPartGuid=`blkid -s PARTUUID -o value "$InstallPart"`
      FirstBoot=`"$Efibootmgr" | grep BootOrder | cut -c 12-15`
      ExistingEntry=`"$Efibootmgr" -v | grep -i "$EfiEntryFilename2" | grep -i "$InstallPartGuid" | head -n 1`
      ExistingEntryFirstBoot=`"$Efibootmgr" -v | grep -i "$EfiEntryFilename2" | grep -i "$InstallPartGuid" | grep "Boot$FirstBoot"`

      if [[ "$ExistingEntry" ]] ; then
         ExistingEntryBootNum=`echo "$ExistingEntry" | cut -c 5-8`
         if [[ ! -n "$ExistingEntryFirstBoot" ]] ; then
            echo "An existing rEFInd boot entry exists, but isn't set as the default boot"
            echo "manager. The boot order is being adjusted to make rEFInd the default boot"
            echo "manager. If this is NOT what you want, you should use efibootmgr to"
            echo "manually adjust your EFI's boot order."
            "$Efibootmgr" -b $ExistingEntryBootNum -B &> /dev/null
         else
            KeepExistingEntry=1
         fi
      fi

      if [[ "$KeepExistingEntry" == 0 ]] ; then
         echo "Creating new NVRAM entry"
         if [[ "$KeepName" == 0 ]] ; then
             "$Efibootmgr" -c -l "$EfiEntryFilename" -L "rEFInd Boot Manager" -d $InstallDisk -p $PartNum &> /dev/null
         else
             "$Efibootmgr" -c -l "$EfiEntryFilename" -L "rEFInd Boot Manager" -d $InstallDisk -p $PartNum \
                           -u "$TargetShim $TargetX64" &> /dev/null
         fi
      else
         echo "Keeping existing NVRAM entry"
      fi
      if [[ $? != 0 ]] ; then
         EfibootmgrProblems=1
         Problems=1
      fi

   else # efibootmgr not found
      EfibootmgrProblems=1
      Problems=1
   fi

   if [[ $EfibootmgrProblems ]] ; then
      echo
      echo "ALERT: There were problems running the efibootmgr program! You may need to"
      echo "rename the $Refind binary to the default name (EFI/BOOT/bootx64.efi"
      echo "on x86-64 systems, EFI/BOOT/bootia32.efi on x86 systems, or"
      echo "EFI/BOOT/bootaa64.efi on ARM64 systems) to have it run!"
      echo
   else
      echo "rEFInd is set as the default boot manager."
   fi
} # AddBootEntry()

# Create a minimal/sample refind_linux.conf file in /boot.
GenerateRefindLinuxConf() {
   if [[ -f "$RLConfFile" ]] ; then
      echo "Existing $RLConfFile found; not overwriting."
   else
      echo "Creating $RLConfFile; edit it to adjust kernel options."
      RootFS=`df "$RootDir" | grep dev | cut -f 1 -d " "`
      StartOfDevname=`echo "$RootFS" | cut -b 1-7`
      if [[ "$StartOfDevname" == "/dev/sd" || "$StartOfDevName" == "/dev/hd" ]] ; then
         # Identify root filesystem by UUID rather than by device node, if possible
         Uuid=`blkid -o export -s UUID "$RootFS" 2> /dev/null | grep UUID=`
         if [[ -n $Uuid ]] ; then
            RootFS="$Uuid"
         fi
      fi
      if [[ $RootDir == "/" ]] ; then
         local FirstCmdlineOption=`cat /proc/cmdline | cut -d ' ' -f 1`
         if [[ "$FirstCmdlineOption" =~ (vmlinuz|bzImage|kernel) ]] ; then
            DefaultOptions=`cat /proc/cmdline | cut -d ' ' -f 2- | sed 's/\S*initrd=\S*//g' | sed 's/ *$//' | sed 's/^ *//'`
         else
            DefaultOptions=`cat /proc/cmdline | sed 's/\S*initrd=\S*//g' | sed 's/ *$//' | sed 's/^ *//'`
         fi
      else
         if [[ -f "$RootDir/etc/default/grub" ]] ; then
            # We want the default options used by the distribution, stored here....
            source "$RootDir/etc/default/grub"
            echo "Setting default boot options based on $RootDir/etc/default/grub"
         fi
         DefaultOptions="ro root=$RootFS $GRUB_CMDLINE_LINUX $GRUB_CMDLINE_LINUX_DEFAULT"
      fi
      echo "\"Boot with standard options\"  \"$DefaultOptions\"" > $RLConfFile
      echo "\"Boot to single-user mode\"    \"$DefaultOptions single\"" >> $RLConfFile
      echo "\"Boot with minimal options\"   \"ro root=$RootFS\"" >> $RLConfFile
   fi
}

# Controls rEFInd installation under Linux.
# Sets Problems=1 if something goes wrong.
InstallOnLinux() {
   if [[ "$TargetDir" == "/System/Library/CoreServices" ]] ; then
      echo "You may not use the --ownhfs option under Linux! Aborting!"
      exit 1
   fi
   echo "Installing rEFInd on Linux...."
   modprobe efivars &> /dev/null
   if [[ $TargetDir == "/EFI/BOOT" ]] ; then
      MountDefaultTarget
   else
      FindMountedESP
      DetermineTargetDir
   fi

   if [[ $LocalKeys == 1 ]] ; then
      ReSignBinaries
   fi

   CheckSecureBoot
   CopyRefindFiles
   if [[ "$TargetDir" != "/EFI/BOOT" && "$TargetDir" != "/EFI/Microsoft/Boot" ]] ; then
      AddBootEntry
      GenerateRefindLinuxConf
   fi
} # InstallOnLinux()

#
# The main part of the script. Sets a few environment variables,
# performs a few startup checks, and then calls functions to
# install under OS X or Linux, depending on the detected platform.
#
GetParams "$@"
if [[ $UID != 0 ]] ; then
   echo "Not running as root; attempting to elevate privileges via sudo...."
   sudo "$BASH_SOURCE" "$@"
   if [[ $? != 0 ]] ; then
      echo "This script must be run as root (or using sudo). Exiting!"
      exit 1
   else
      exit 0
   fi
fi
DeterminePlatform
CheckForFiles
case "$OSTYPE" in
   darwin*)
        if [[ "$ShimSource" != "none" ]] ; then
           echo "The --shim option is not supported on macOS! Exiting!"
           exit 1
        fi
        if [[ "$LocalKeys" != 0 ]] ; then
           echo "The --localkeys option is not supported on macOS! Exiting!"
           exit 1
        fi
        InstallOnOSX $1
        ;;
   linux*)
        InstallOnLinux
        ;;
   *)
        echo "Running on unknown OS; aborting!"
        if [[ "$InstallToEspOnMac" == 0 ]] ; then
           echo "The --notesp option is not supported on Linux! Exiting!"
           exit 1
        fi
esac
CreateBootCsvFile

if [[ $Problems ]] ; then
   echo
   echo "ALERT:"
   echo "Installation has completed, but problems were detected. Review the output for"
   echo "error messages and take corrective measures as necessary. You may need to"
   echo "re-run this script or install manually before rEFInd will work."
   echo
else
   echo
   echo "Installation has completed successfully."
   echo
fi

if [[ $UnmountEsp == '1' ]] ; then
   echo "Unmounting install dir"
   case "$OSTYPE" in
   darwin*)
      diskutil unmount $InstallDir
      ;;
   *)
      umount $InstallDir
      ;;
   esac
fi

if [[ "$InstallDir" == /tmp/refind_install ]] ; then
#   sleep 5
   rmdir "$InstallDir"
fi