/* sane - Scanner Access Now Easy.

   Copyright (C) 2003 Oliver Rauch
   Copyright (C) 2003, 2004 Henning Meier-Geinitz <henning@meier-geinitz.de>
   Copyright (C) 2004 Gerhard Jaeger <gerhard@gjaeger.de>
   Copyright (C) 2004-2013 Stéphane Voltz <stef.dev@free.fr>
   Copyright (C) 2005-2009 Pierre Willenbrock <pierre@pirsoft.dnsalias.org>
   Copyright (C) 2007 Luke <iceyfor@gmail.com>
   Copyright (C) 2011 Alexey Osipov <simba@lerlan.ru> for HP2400 description
                      and tuning

   This file is part of the SANE package.

   This program is free software; you can redistribute it and/or
   modify it under the terms of the GNU General Public License as
   published by the Free Software Foundation; either version 2 of the
   License, or (at your option) any later version.

   This program is distributed in the hope that it will be useful, but
   WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
   General Public License for more details.

   You should have received a copy of the GNU General Public License
   along with this program.  If not, see <https://www.gnu.org/licenses/>.
*/

#define DEBUG_DECLARE_ONLY

#include "gl646.h"
#include "gl646_registers.h"
#include "test_settings.h"

#include <vector>

namespace genesys {
namespace gl646 {

namespace {
constexpr unsigned CALIBRATION_LINES = 10;
} // namespace

static void write_control(Genesys_Device* dev, const Genesys_Sensor& sensor, int resolution);


static void gl646_set_fe(Genesys_Device* dev, const Genesys_Sensor& sensor, std::uint8_t set,
                         int dpi);

static void simple_scan(Genesys_Device* dev, const Genesys_Sensor& sensor,
                        const ScanSession& session, bool move,
                        std::vector<std::uint8_t>& data, const char* test_identifier);
/**
 * Send the stop scan command
 * */
static void end_scan_impl(Genesys_Device* dev, Genesys_Register_Set* reg, bool check_stop,
                          bool eject);

/**
 * master motor settings table entry
 */
struct Motor_Master
{
    MotorId motor_id;
    unsigned dpi;
    unsigned channels;

    // settings
    StepType steptype;
    bool fastmod; // fast scanning
    bool fastfed; // fast fed slope tables
    SANE_Int mtrpwm;
    MotorSlope slope1;
    MotorSlope slope2;
    SANE_Int fwdbwd; // forward/backward steps
};

/**
 * master motor settings, for a given motor and dpi,
 * it gives steps and speed information
 */
static Motor_Master motor_master[] = {
    /* HP3670 motor settings */
    {MotorId::HP3670, 50, 3, StepType::HALF, false, true, 1,
     MotorSlope::create_from_steps(2329, 120, 229),
     MotorSlope::create_from_steps(3399, 337, 192), 192},

    {MotorId::HP3670, 75, 3, StepType::FULL, false, true, 1,
     MotorSlope::create_from_steps(3429, 305, 200),
     MotorSlope::create_from_steps(3399, 337, 192), 192},

    {MotorId::HP3670, 100, 3, StepType::HALF, false, true, 1,
     MotorSlope::create_from_steps(2905, 187, 143),
     MotorSlope::create_from_steps(3399, 337, 192), 192},

    {MotorId::HP3670, 150, 3, StepType::HALF, false, true, 1,
     MotorSlope::create_from_steps(3429, 305, 73),
     MotorSlope::create_from_steps(3399, 337, 192), 192},

    {MotorId::HP3670, 300, 3, StepType::HALF, false, true, 1,
     MotorSlope::create_from_steps(1055, 563, 11),
     MotorSlope::create_from_steps(3399, 337, 192), 192},

    {MotorId::HP3670, 600, 3, StepType::FULL, false, true, 0,
     MotorSlope::create_from_steps(10687, 5126, 3),
     MotorSlope::create_from_steps(3399, 337, 192), 192},

    {MotorId::HP3670,1200, 3, StepType::HALF, false, true, 0,
     MotorSlope::create_from_steps(15937, 6375, 3),
     MotorSlope::create_from_steps(3399, 337, 192), 192},

    {MotorId::HP3670, 50, 1, StepType::HALF, false, true, 1,
     MotorSlope::create_from_steps(2329, 120, 229),
     MotorSlope::create_from_steps(3399, 337, 192), 192},

    {MotorId::HP3670, 75, 1, StepType::FULL, false, true, 1,
     MotorSlope::create_from_steps(3429, 305, 200),
     MotorSlope::create_from_steps(3399, 337, 192), 192},

    {MotorId::HP3670, 100, 1, StepType::HALF, false, true, 1,
     MotorSlope::create_from_steps(2905, 187, 143),
     MotorSlope::create_from_steps(3399, 337, 192), 192},

    {MotorId::HP3670, 150, 1, StepType::HALF, false, true, 1,
     MotorSlope::create_from_steps(3429, 305, 73),
     MotorSlope::create_from_steps(3399, 337, 192), 192},

    {MotorId::HP3670, 300, 1, StepType::HALF, false, true, 1,
     MotorSlope::create_from_steps(1055, 563, 11),
     MotorSlope::create_from_steps(3399, 337, 192), 192},

    {MotorId::HP3670, 600, 1, StepType::FULL, false, true, 0,
     MotorSlope::create_from_steps(10687, 5126, 3),
     MotorSlope::create_from_steps(3399, 337, 192), 192},

    {MotorId::HP3670,1200, 1, StepType::HALF, false, true, 0,
     MotorSlope::create_from_steps(15937, 6375, 3),
     MotorSlope::create_from_steps(3399, 337, 192), 192},

    /* HP2400/G2410 motor settings base motor dpi = 600 */
    {MotorId::HP2400, 50, 3, StepType::FULL, false, true, 63,
     MotorSlope::create_from_steps(8736, 601, 120),
     MotorSlope::create_from_steps(4905, 337, 192), 192},

    {MotorId::HP2400, 100, 3, StepType::HALF, false, true, 63,
     MotorSlope::create_from_steps(8736, 601, 120),
     MotorSlope::create_from_steps(4905, 337, 192), 192},

    {MotorId::HP2400, 150, 3, StepType::HALF, false, true, 63,
     MotorSlope::create_from_steps(15902, 902, 67),
     MotorSlope::create_from_steps(4905, 337, 192), 192},

    {MotorId::HP2400, 300, 3, StepType::HALF, false, true, 63,
     MotorSlope::create_from_steps(16703, 2188, 32),
     MotorSlope::create_from_steps(4905, 337, 192), 192},

    {MotorId::HP2400, 600, 3, StepType::FULL, false, true, 63,
     MotorSlope::create_from_steps(18761, 18761, 3),
     MotorSlope::create_from_steps(4905, 627, 192), 192},

    {MotorId::HP2400,1200, 3, StepType::HALF, false, true, 63,
     MotorSlope::create_from_steps(43501, 43501, 3),
     MotorSlope::create_from_steps(4905, 627, 192), 192},

    {MotorId::HP2400, 50, 1, StepType::FULL, false, true, 63,
     MotorSlope::create_from_steps(8736, 601, 120),
     MotorSlope::create_from_steps(4905, 337, 192), 192},

    {MotorId::HP2400, 100, 1, StepType::HALF, false, true, 63,
     MotorSlope::create_from_steps(8736, 601, 120),
     MotorSlope::create_from_steps(4905, 337, 192), 192},

    {MotorId::HP2400, 150, 1, StepType::HALF, false, true, 63,
     MotorSlope::create_from_steps(15902, 902, 67),
     MotorSlope::create_from_steps(4905, 337, 192), 192},

    {MotorId::HP2400, 300, 1, StepType::HALF, false, true, 63,
     MotorSlope::create_from_steps(16703, 2188, 32),
     MotorSlope::create_from_steps(4905, 337, 192), 192},

    {MotorId::HP2400, 600, 1, StepType::FULL, false, true, 63,
     MotorSlope::create_from_steps(18761, 18761, 3),
     MotorSlope::create_from_steps(4905, 337, 192), 192},

    {MotorId::HP2400,1200, 1, StepType::HALF, false, true, 63,
     MotorSlope::create_from_steps(43501, 43501, 3),
     MotorSlope::create_from_steps(4905, 337, 192), 192},

    /* XP 200 motor settings */
    {MotorId::XP200, 75, 3, StepType::HALF, true, false, 0,
     MotorSlope::create_from_steps(6000, 2136, 4),
     MotorSlope::create_from_steps(12000, 1200, 8), 1},

    {MotorId::XP200, 100, 3, StepType::HALF, true, false, 0,
     MotorSlope::create_from_steps(6000, 2850, 4),
     MotorSlope::create_from_steps(12000, 1200, 8), 1},

    {MotorId::XP200, 200, 3, StepType::HALF, true, false, 0,
     MotorSlope::create_from_steps(6999, 5700, 4),
     MotorSlope::create_from_steps(12000, 1200, 8), 1},

    {MotorId::XP200, 250, 3, StepType::HALF, true, false, 0,
     MotorSlope::create_from_steps(6999, 6999, 4),
     MotorSlope::create_from_steps(12000, 1200, 8), 1},

    {MotorId::XP200, 300, 3, StepType::HALF, true, false, 0,
     MotorSlope::create_from_steps(13500, 13500, 4),
     MotorSlope::create_from_steps(12000, 1200, 8), 1},

    {MotorId::XP200, 600, 3, StepType::HALF, true, true, 0,
     MotorSlope::create_from_steps(31998, 31998, 4),
     MotorSlope::create_from_steps(12000, 1200, 2), 1},

    {MotorId::XP200, 75, 1, StepType::HALF, true, false, 0,
     MotorSlope::create_from_steps(6000, 2000, 4),
     MotorSlope::create_from_steps(12000, 1200, 8), 1},

    {MotorId::XP200, 100, 1, StepType::HALF, true, false, 0,
     MotorSlope::create_from_steps(6000, 1300, 4),
     MotorSlope::create_from_steps(12000, 1200, 8), 1},

    {MotorId::XP200, 200, 1, StepType::HALF, true, true, 0,
     MotorSlope::create_from_steps(6000, 3666, 4),
     MotorSlope::create_from_steps(12000, 1200, 8), 1},

    {MotorId::XP200, 300, 1, StepType::HALF, true, false, 0,
     MotorSlope::create_from_steps(6500, 6500, 4),
     MotorSlope::create_from_steps(12000, 1200, 8), 1},

    {MotorId::XP200, 600, 1, StepType::HALF, true, true, 0,
     MotorSlope::create_from_steps(24000, 24000, 4),
     MotorSlope::create_from_steps(12000, 1200, 2), 1},

    /* HP scanjet 2300c */
    {MotorId::HP2300, 75, 3, StepType::FULL, false, true, 63,
     MotorSlope::create_from_steps(8139, 560, 120),
     MotorSlope::create_from_steps(4905, 337, 120), 16},

    {MotorId::HP2300, 150, 3, StepType::HALF, false, true, 63,
     MotorSlope::create_from_steps(7903, 543, 67),
     MotorSlope::create_from_steps(4905, 337, 120), 16},

    {MotorId::HP2300, 300, 3, StepType::HALF, false, true, 63,
     MotorSlope::create_from_steps(2175, 1087, 3),
     MotorSlope::create_from_steps(4905, 337, 120), 16},

    {MotorId::HP2300, 600, 3, StepType::HALF, false, true, 63,
     MotorSlope::create_from_steps(8700, 4350, 3),
     MotorSlope::create_from_steps(4905, 337, 120), 16},

    {MotorId::HP2300,1200, 3, StepType::HALF, false, true, 63,
     MotorSlope::create_from_steps(17400, 8700, 3),
     MotorSlope::create_from_steps(4905, 337, 120), 16},

    {MotorId::HP2300, 75, 1, StepType::FULL, false, true, 63,
     MotorSlope::create_from_steps(8139, 560, 120),
     MotorSlope::create_from_steps(4905, 337, 120), 16},

    {MotorId::HP2300, 150, 1, StepType::HALF, false, true, 63,
     MotorSlope::create_from_steps(7903, 543, 67),
     MotorSlope::create_from_steps(4905, 337, 120), 16},

    {MotorId::HP2300, 300, 1, StepType::HALF, false, true, 63,
     MotorSlope::create_from_steps(2175, 1087, 3),
     MotorSlope::create_from_steps(4905, 337, 120), 16},

    {MotorId::HP2300, 600, 1, StepType::HALF, false, true, 63,
     MotorSlope::create_from_steps(8700, 4350, 3),
     MotorSlope::create_from_steps(4905, 337, 120), 16},

    {MotorId::HP2300,1200, 1, StepType::HALF, false, true, 63,
     MotorSlope::create_from_steps(17400, 8700, 3),
     MotorSlope::create_from_steps(4905, 337, 120), 16},

    /* non half ccd settings for 300 dpi
    {MotorId::HP2300, 300, 3, StepType::HALF, false, true, 63,
     MotorSlope::create_from_steps(5386, 2175, 44),
     MotorSlope::create_from_steps(4905, 337, 120), 16},

    {MotorId::HP2300, 300, 1, StepType::HALF, false, true, 63,
     MotorSlope::create_from_steps(5386, 2175, 44),
     MotorSlope::create_from_steps(4905, 337, 120), 16},
    */

    /* MD5345/6471 motor settings */
    /* vfinal=(exposure/(1200/dpi))/step_type */
    {MotorId::MD_5345, 50, 3, StepType::HALF, false, true, 2,
     MotorSlope::create_from_steps(2500, 250, 255),
     MotorSlope::create_from_steps(2000, 300, 255), 64},

    {MotorId::MD_5345, 75, 3, StepType::HALF, false, true, 2,
     MotorSlope::create_from_steps(2500, 343, 255),
     MotorSlope::create_from_steps(2000, 300, 255), 64},

    {MotorId::MD_5345, 100, 3, StepType::HALF, false, true, 2,
     MotorSlope::create_from_steps(2500, 458, 255),
     MotorSlope::create_from_steps(2000, 300, 255), 64},

    {MotorId::MD_5345, 150, 3, StepType::HALF, false, true, 2,
     MotorSlope::create_from_steps(2500, 687, 255),
     MotorSlope::create_from_steps(2000, 300, 255), 64},

    {MotorId::MD_5345, 200, 3, StepType::HALF, false, true, 2,
     MotorSlope::create_from_steps(2500, 916, 255),
     MotorSlope::create_from_steps(2000, 300, 255), 64},

    {MotorId::MD_5345, 300, 3, StepType::HALF, false, true, 2,
     MotorSlope::create_from_steps(2500, 1375, 255),
     MotorSlope::create_from_steps(2000, 300, 255), 64},

    {MotorId::MD_5345, 400, 3, StepType::HALF, false, true, 0,
     MotorSlope::create_from_steps(2000, 1833, 32),
     MotorSlope::create_from_steps(2000, 300, 255), 32},

    {MotorId::MD_5345, 500, 3, StepType::HALF, false, true, 0,
     MotorSlope::create_from_steps(2291, 2291, 32),
     MotorSlope::create_from_steps(2000, 300, 255), 32},

    {MotorId::MD_5345, 600, 3, StepType::HALF, false, true, 0,
     MotorSlope::create_from_steps(2750, 2750, 32),
     MotorSlope::create_from_steps(2000, 300, 255), 32},

    {MotorId::MD_5345, 1200, 3, StepType::QUARTER, false, true, 0,
     MotorSlope::create_from_steps(2750, 2750, 16),
     MotorSlope::create_from_steps(2000, 300, 255), 146},

    {MotorId::MD_5345, 2400, 3, StepType::QUARTER, false, true, 0,
     MotorSlope::create_from_steps(5500, 5500, 16),
     MotorSlope::create_from_steps(2000, 300, 255), 146},

    {MotorId::MD_5345, 50, 1, StepType::HALF, false, true, 2,
     MotorSlope::create_from_steps(2500, 250, 255),
     MotorSlope::create_from_steps(2000, 300, 255), 64},

    {MotorId::MD_5345, 75, 1, StepType::HALF, false, true, 2,
     MotorSlope::create_from_steps(2500, 343, 255),
     MotorSlope::create_from_steps(2000, 300, 255), 64},

    {MotorId::MD_5345, 100, 1, StepType::HALF, false, true, 2,
     MotorSlope::create_from_steps(2500, 458, 255),
     MotorSlope::create_from_steps(2000, 300, 255), 64},

    {MotorId::MD_5345, 150, 1, StepType::HALF, false, true, 2,
     MotorSlope::create_from_steps(2500, 687, 255),
     MotorSlope::create_from_steps(2000, 300, 255), 64},

    {MotorId::MD_5345, 200, 1, StepType::HALF, false, true, 2,
     MotorSlope::create_from_steps(2500, 916, 255),
     MotorSlope::create_from_steps(2000, 300, 255), 64},

    {MotorId::MD_5345, 300, 1, StepType::HALF, false, true, 2,
     MotorSlope::create_from_steps(2500, 1375, 255),
     MotorSlope::create_from_steps(2000, 300, 255), 64},

    {MotorId::MD_5345, 400, 1, StepType::HALF, false, true, 0,
     MotorSlope::create_from_steps(2000, 1833, 32),
     MotorSlope::create_from_steps(2000, 300, 255), 32},

    {MotorId::MD_5345, 500, 1, StepType::HALF, false, true, 0,
     MotorSlope::create_from_steps(2291, 2291, 32),
     MotorSlope::create_from_steps(2000, 300, 255), 32},

    {MotorId::MD_5345, 600, 1, StepType::HALF, false, true, 0,
     MotorSlope::create_from_steps(2750, 2750, 32),
     MotorSlope::create_from_steps(2000, 300, 255), 32},

    {MotorId::MD_5345, 1200, 1, StepType::QUARTER, false, true, 0,
     MotorSlope::create_from_steps(2750, 2750, 16),
     MotorSlope::create_from_steps(2000, 300, 255), 146},

    {MotorId::MD_5345, 2400, 1, StepType::QUARTER, false, true, 0,
     MotorSlope::create_from_steps(5500, 5500, 16),
     MotorSlope::create_from_steps(2000, 300, 255), 146}, /* 5500 guessed */
};

/**
 * reads value from gpio endpoint
 */
static void gl646_gpio_read(IUsbDevice& usb_dev, std::uint8_t* value)
{
    DBG_HELPER(dbg);
    usb_dev.control_msg(REQUEST_TYPE_IN, REQUEST_REGISTER, GPIO_READ, INDEX, 1, value);
}

/**
 * writes the given value to gpio endpoint
 */
static void gl646_gpio_write(IUsbDevice& usb_dev, std::uint8_t value)
{
    DBG_HELPER_ARGS(dbg, "(0x%02x)", value);
    usb_dev.control_msg(REQUEST_TYPE_OUT, REQUEST_REGISTER, GPIO_WRITE, INDEX, 1, &value);
}

/**
 * writes the given value to gpio output enable endpoint
 */
static void gl646_gpio_output_enable(IUsbDevice& usb_dev, std::uint8_t value)
{
    DBG_HELPER_ARGS(dbg, "(0x%02x)", value);
    usb_dev.control_msg(REQUEST_TYPE_OUT, REQUEST_REGISTER, GPIO_OUTPUT_ENABLE, INDEX, 1, &value);
}

/**
 * stop scanner's motor
 * @param dev scanner's device
 */
static void gl646_stop_motor(Genesys_Device* dev)
{
    DBG_HELPER(dbg);
    dev->interface->write_register(0x0f, 0x00);
}

/**
 * Returns the cksel values used by the required scan mode.
 * @param sensor id of the sensor
 * @param required required resolution
 * @param color true is color mode
 * @return cksel value for mode
 */
static int get_cksel(SensorId sensor_id, int required, unsigned channels)
{
    for (const auto& sensor : *s_sensors) {
        // exit on perfect match
        if (sensor.sensor_id == sensor_id && sensor.resolutions.matches(required) &&
            sensor.matches_channel_count(channels))
        {
            unsigned cksel = sensor.ccd_pixels_per_system_pixel();
            return cksel;
        }
    }
  DBG(DBG_error, "%s: failed to find match for %d dpi\n", __func__, required);
  /* fail safe fallback */
  return 1;
}

void CommandSetGl646::init_regs_for_scan_session(Genesys_Device* dev, const Genesys_Sensor& sensor,
                                                 Genesys_Register_Set* regs,
                                                 const ScanSession& session) const
{
    DBG_HELPER(dbg);
    session.assert_computed();

    debug_dump(DBG_info, sensor);

    std::uint32_t move = session.params.starty;

  Motor_Master *motor = nullptr;
    std::uint32_t z1, z2;
  int feedl;


  /* for the given resolution, search for master
   * motor mode setting */
    for (unsigned i = 0; i < sizeof (motor_master) / sizeof (Motor_Master); ++i) {
        if (dev->model->motor_id == motor_master[i].motor_id &&
            motor_master[i].dpi == session.params.yres &&
            motor_master[i].channels == session.params.channels)
        {
            motor = &motor_master[i];
        }
    }
    if (motor == nullptr) {
        throw SaneException("unable to find settings for motor %d at %d dpi, color=%d",
                            static_cast<unsigned>(dev->model->motor_id),
                            session.params.yres, session.params.channels);
    }

    scanner_setup_sensor(*dev, sensor, *regs);

  /* now generate slope tables : we are not using generate_slope_table3 yet */
    auto slope_table1 = create_slope_table_for_speed(motor->slope1, motor->slope1.max_speed_w,
                                                     StepType::FULL, 1, 4,
                                                     get_slope_table_max_size(AsicType::GL646));
    auto slope_table2 = create_slope_table_for_speed(motor->slope2, motor->slope2.max_speed_w,
                                                     StepType::FULL, 1, 4,
                                                     get_slope_table_max_size(AsicType::GL646));

  /* R01 */
  /* now setup other registers for final scan (ie with shading enabled) */
  /* watch dog + shading + scan enable */
    regs->find_reg(0x01).value |= REG_0x01_DOGENB | REG_0x01_SCAN;
    if (dev->model->is_cis) {
        regs->find_reg(0x01).value |= REG_0x01_CISSET;
    } else {
        regs->find_reg(0x01).value &= ~REG_0x01_CISSET;
    }

    // if device has no calibration, don't enable shading correction
    if (has_flag(dev->model->flags, ModelFlag::DISABLE_SHADING_CALIBRATION) ||
        has_flag(session.params.flags, ScanFlag::DISABLE_SHADING))
    {
        regs->find_reg(0x01).value &= ~REG_0x01_DVDSET;
    } else {
        regs->find_reg(0x01).value |= REG_0x01_DVDSET;
    }

    regs->find_reg(0x01).value &= ~REG_0x01_FASTMOD;
    if (motor->fastmod) {
        regs->find_reg(0x01).value |= REG_0x01_FASTMOD;
    }

  /* R02 */
  /* allow moving when buffer full by default */
    if (!dev->model->is_sheetfed) {
        dev->reg.find_reg(0x02).value &= ~REG_0x02_ACDCDIS;
    } else {
        dev->reg.find_reg(0x02).value |= REG_0x02_ACDCDIS;
    }

  /* setup motor power and direction */
  sanei_genesys_set_motor_power(*regs, true);

    if (has_flag(session.params.flags, ScanFlag::REVERSE)) {
        regs->find_reg(0x02).value |= REG_0x02_MTRREV;
    } else {
        regs->find_reg(0x02).value &= ~REG_0x02_MTRREV;
    }

  /* fastfed enabled (2 motor slope tables) */
    if (motor->fastfed) {
        regs->find_reg(0x02).value |= REG_0x02_FASTFED;
    } else {
        regs->find_reg(0x02).value &= ~REG_0x02_FASTFED;
    }

  /* step type */
    regs->find_reg(0x02).value &= ~REG_0x02_STEPSEL;
  switch (motor->steptype)
    {
    case StepType::FULL:
      break;
    case StepType::HALF:
      regs->find_reg(0x02).value |= 1;
      break;
    case StepType::QUARTER:
      regs->find_reg(0x02).value |= 2;
      break;
    default:
      regs->find_reg(0x02).value |= 3;
      break;
    }

    if (dev->model->is_sheetfed || !has_flag(session.params.flags, ScanFlag::AUTO_GO_HOME)) {
        regs->find_reg(0x02).value &= ~REG_0x02_AGOHOME;
    } else {
        regs->find_reg(0x02).value |= REG_0x02_AGOHOME;
    }

  /* R03 */
    regs->find_reg(0x03).value &= ~REG_0x03_AVEENB;
    // regs->find_reg(0x03).value |= REG_0x03_AVEENB;
    regs->find_reg(0x03).value &= ~REG_0x03_LAMPDOG;

  /* select XPA */
    regs->find_reg(0x03).value &= ~REG_0x03_XPASEL;
    if ((session.params.flags & ScanFlag::USE_XPA) != ScanFlag::NONE) {
        regs->find_reg(0x03).value |= REG_0x03_XPASEL;
    }
    regs->state.is_xpa_on = (session.params.flags & ScanFlag::USE_XPA) != ScanFlag::NONE;

  /* R04 */
  /* monochrome / color scan */
    switch (session.params.depth) {
    case 8:
            regs->find_reg(0x04).value &= ~(REG_0x04_LINEART | REG_0x04_BITSET);
            break;
    case 16:
            regs->find_reg(0x04).value &= ~REG_0x04_LINEART;
            regs->find_reg(0x04).value |= REG_0x04_BITSET;
            break;
    }

    sanei_genesys_set_dpihw(*regs, sensor.full_resolution);

  /* gamma enable for scans */
    if (has_flag(dev->model->flags, ModelFlag::GAMMA_14BIT)) {
        regs->find_reg(0x05).value |= REG_0x05_GMM14BIT;
    }

    if (!has_flag(session.params.flags, ScanFlag::DISABLE_GAMMA) &&
        session.params.depth < 16)
    {
        regs->find_reg(REG_0x05).value |= REG_0x05_GMMENB;
    } else {
        regs->find_reg(REG_0x05).value &= ~REG_0x05_GMMENB;
    }

  /* true CIS gray if needed */
    if (dev->model->is_cis && session.params.channels == 1 &&
        session.params.color_filter == ColorFilter::NONE)
    {
        regs->find_reg(0x05).value |= REG_0x05_LEDADD;
    } else {
        regs->find_reg(0x05).value &= ~REG_0x05_LEDADD;
    }

  /* HP2400 1200dpi mode tuning */

    if (dev->model->sensor_id == SensorId::CCD_HP2400) {
      /* reset count of dummy lines to zero */
        regs->find_reg(0x1e).value &= ~REG_0x1E_LINESEL;
        if (session.params.xres >= 1200) {
          /* there must be one dummy line */
            regs->find_reg(0x1e).value |= 1 & REG_0x1E_LINESEL;

          /* GPO12 need to be set to zero */
          regs->find_reg(0x66).value &= ~0x20;
        }
        else
        {
          /* set GPO12 back to one */
          regs->find_reg(0x66).value |= 0x20;
        }
    }

  /* motor steps used */
    unsigned forward_steps = motor->fwdbwd;
    unsigned backward_steps = motor->fwdbwd;

    // the steps count must be different by at most 128, otherwise it's impossible to construct
    // a proper backtracking curve. We're using slightly lower limit to allow at least a minimum
    // distance between accelerations (forward_steps, backward_steps)
    if (slope_table1.table.size() > slope_table2.table.size() + 100) {
        slope_table2.expand_table(slope_table1.table.size() - 100, 1);
    }
    if (slope_table2.table.size() > slope_table1.table.size() + 100) {
        slope_table1.expand_table(slope_table2.table.size() - 100, 1);
    }

    if (slope_table1.table.size() >= slope_table2.table.size()) {
        backward_steps += (slope_table1.table.size() - slope_table2.table.size()) * 2;
    } else {
        forward_steps += (slope_table2.table.size() - slope_table1.table.size()) * 2;
    }

    if (forward_steps > 255) {
        if (backward_steps < (forward_steps - 255)) {
            throw SaneException("Can't set backtracking parameters without skipping image");
        }
        backward_steps -= forward_steps - 255;
    }
    if (backward_steps > 255) {
        if (forward_steps < (backward_steps - 255)) {
            throw SaneException("Can't set backtracking parameters without skipping image");
        }
        forward_steps -= backward_steps - 255;
    }

    regs->find_reg(0x21).value = slope_table1.table.size();
    regs->find_reg(0x24).value = slope_table2.table.size();
    regs->find_reg(0x22).value = forward_steps;
    regs->find_reg(0x23).value = backward_steps;

  /* CIS scanners read one line per color channel
   * since gray mode use 'add' we also read 3 channels even not in
   * color mode */
    if (dev->model->is_cis) {
        regs->set24(REG_LINCNT, session.output_line_count * 3);
    } else {
        regs->set24(REG_LINCNT, session.output_line_count);
    }

    regs->set16(REG_STRPIXEL, session.pixel_startx);
    regs->set16(REG_ENDPIXEL, session.pixel_endx);

    regs->set24(REG_MAXWD, session.output_line_bytes);

    // FIXME: the incoming sensor is selected for incorrect resolution
    const auto& dpiset_sensor = sanei_genesys_find_sensor(dev, session.params.xres,
                                                          session.params.channels,
                                                          session.params.scan_method);
    regs->set16(REG_DPISET, dpiset_sensor.register_dpiset);
    regs->set16(REG_LPERIOD, sensor.exposure_lperiod);

  /* move distance must be adjusted to take into account the extra lines
   * read to reorder data */
  feedl = move;

    if (session.num_staggered_lines + session.max_color_shift_lines > 0 && feedl != 0) {
        unsigned total_lines = session.max_color_shift_lines + session.num_staggered_lines;
        int feed_offset = (total_lines * dev->motor.base_ydpi) / motor->dpi;
        if (feedl > feed_offset) {
            feedl = feedl - feed_offset;
        }
    }

  /* we assume all scans are done with 2 tables */
  /*
     feedl = feed_steps - fast_slope_steps*2 -
     (slow_slope_steps >> scan_step_type); */
  /* but head has moved due to shading calibration => dev->scanhead_position_primary */
  if (feedl > 0)
    {
      /* TODO clean up this when I'll fully understand.
       * for now, special casing each motor */
        switch (dev->model->motor_id) {
            case MotorId::MD_5345:
                    switch (motor->dpi) {
	    case 200:
	      feedl -= 70;
	      break;
	    case 300:
	      feedl -= 70;
	      break;
	    case 400:
	      feedl += 130;
	      break;
	    case 600:
	      feedl += 160;
	      break;
	    case 1200:
	      feedl += 160;
	      break;
	    case 2400:
	      feedl += 180;
	      break;
	    default:
	      break;
	    }
	  break;
            case MotorId::HP2300:
                    switch (motor->dpi) {
	    case 75:
	      feedl -= 180;
	      break;
	    case 150:
	      feedl += 0;
	      break;
	    case 300:
	      feedl += 30;
	      break;
	    case 600:
	      feedl += 35;
	      break;
	    case 1200:
	      feedl += 45;
	      break;
	    default:
	      break;
	    }
	  break;
            case MotorId::HP2400:
                    switch (motor->dpi) {
	    case 150:
	      feedl += 150;
	      break;
	    case 300:
	      feedl += 220;
	      break;
	    case 600:
	      feedl += 260;
	      break;
	    case 1200:
	      feedl += 280; /* 300 */
	      break;
	    case 50:
	      feedl += 0;
	      break;
	    case 100:
	      feedl += 100;
	      break;
	    default:
	      break;
	    }
	  break;

	  /* theorical value */
        default: {
            unsigned step_shift = static_cast<unsigned>(motor->steptype);

	  if (motor->fastfed)
        {
                feedl = feedl - 2 * slope_table2.table.size() -
                        (slope_table1.table.size() >> step_shift);
	    }
	  else
	    {
                feedl = feedl - (slope_table1.table.size() >> step_shift);
	    }
	  break;
        }
	}
      /* security */
      if (feedl < 0)
	feedl = 0;
    }

    regs->set24(REG_FEEDL, feedl);

  regs->find_reg(0x65).value = motor->mtrpwm;

    sanei_genesys_calculate_zmod(regs->find_reg(0x02).value & REG_0x02_FASTFED,
                                 sensor.exposure_lperiod,
                                 slope_table1.table,
                                 slope_table1.table.size(),
                                  move, motor->fwdbwd, &z1, &z2);

  /* no z1/z2 for sheetfed scanners */
    if (dev->model->is_sheetfed) {
      z1 = 0;
      z2 = 0;
    }
    regs->set16(REG_Z1MOD, z1);
    regs->set16(REG_Z2MOD, z2);
    regs->find_reg(0x6b).value = slope_table2.table.size();
  regs->find_reg(0x6c).value =
    (regs->find_reg(0x6c).value & REG_0x6C_TGTIME) | ((z1 >> 13) & 0x38) | ((z2 >> 16)
								   & 0x07);

    write_control(dev, sensor, session.output_resolution);

    // setup analog frontend
    gl646_set_fe(dev, sensor, AFE_SET, session.output_resolution);

    setup_image_pipeline(*dev, session);

    dev->read_active = true;

    dev->session = session;

    dev->total_bytes_read = 0;
    dev->total_bytes_to_read = (size_t) session.output_line_bytes_requested
          * (size_t) session.params.lines;

    /* select color filter based on settings */
    regs->find_reg(0x04).value &= ~REG_0x04_FILTER;
    if (session.params.channels == 1) {
        switch (session.params.color_filter) {
            case ColorFilter::RED:
                regs->find_reg(0x04).value |= 0x04;
                break;
            case ColorFilter::GREEN:
                regs->find_reg(0x04).value |= 0x08;
                break;
            case ColorFilter::BLUE:
                regs->find_reg(0x04).value |= 0x0c;
                break;
            default:
                break;
        }
    }

    scanner_send_slope_table(dev, sensor, 0, slope_table1.table);
    scanner_send_slope_table(dev, sensor, 1, slope_table2.table);
}

/**
 * Set all registers to default values after init
 * @param dev scannerr's device to set
 */
static void
gl646_init_regs (Genesys_Device * dev)
{
  int addr;

  DBG(DBG_proc, "%s\n", __func__);

    dev->reg.clear();

    for (addr = 1; addr <= 0x0b; addr++)
        dev->reg.init_reg(addr, 0);
    for (addr = 0x10; addr <= 0x29; addr++)
        dev->reg.init_reg(addr, 0);
    for (addr = 0x2c; addr <= 0x39; addr++)
        dev->reg.init_reg(addr, 0);
    for (addr = 0x3d; addr <= 0x3f; addr++)
        dev->reg.init_reg(addr, 0);
    for (addr = 0x52; addr <= 0x5e; addr++)
        dev->reg.init_reg(addr, 0);
    for (addr = 0x60; addr <= 0x6d; addr++)
        dev->reg.init_reg(addr, 0);

    dev->reg.find_reg(0x01).value = 0x20 /*0x22 */ ;	/* enable shading, CCD, color, 1M */
    dev->reg.find_reg(0x02).value = 0x30 /*0x38 */ ;	/* auto home, one-table-move, full step */
    if (dev->model->motor_id == MotorId::MD_5345) {
        dev->reg.find_reg(0x02).value |= 0x01; // half-step
    }
    switch (dev->model->motor_id) {
        case MotorId::MD_5345:
      dev->reg.find_reg(0x02).value |= 0x01;	/* half-step */
      break;
        case MotorId::XP200:
      /* for this sheetfed scanner, no AGOHOME, nor backtracking */
      dev->reg.find_reg(0x02).value = 0x50;
      break;
        default:
      break;
    }
    dev->reg.find_reg(0x03).value = 0x1f /*0x17 */ ;	/* lamp on */
    dev->reg.find_reg(0x04).value = 0x13 /*0x03 */ ;	/* 8 bits data, 16 bits A/D, color, Wolfson fe *//* todo: according to spec, 0x0 is reserved? */
  switch (dev->model->adc_id)
    {
    case AdcId::AD_XP200:
      dev->reg.find_reg(0x04).value = 0x12;
      break;
    default:
      /* Wolfson frontend */
      dev->reg.find_reg(0x04).value = 0x13;
      break;
    }

  const auto& sensor = sanei_genesys_find_sensor_any(dev);

  dev->reg.find_reg(0x05).value = 0x00;	/* 12 bits gamma, disable gamma, 24 clocks/pixel */
    sanei_genesys_set_dpihw(dev->reg, sensor.full_resolution);

    if (has_flag(dev->model->flags, ModelFlag::GAMMA_14BIT)) {
        dev->reg.find_reg(0x05).value |= REG_0x05_GMM14BIT;
    }
    if (dev->model->adc_id == AdcId::AD_XP200) {
        dev->reg.find_reg(0x05).value |= 0x01;	/* 12 clocks/pixel */
    }

    if (dev->model->sensor_id == SensorId::CCD_HP2300) {
        dev->reg.find_reg(0x06).value = 0x00; // PWRBIT off, shading gain=4, normal AFE image capture
    } else {
        dev->reg.find_reg(0x06).value = 0x18; // PWRBIT on, shading gain=8, normal AFE image capture
    }

    scanner_setup_sensor(*dev, sensor, dev->reg);

  dev->reg.find_reg(0x1e).value = 0xf0;	/* watch-dog time */

  switch (dev->model->sensor_id)
    {
    case SensorId::CCD_HP2300:
      dev->reg.find_reg(0x1e).value = 0xf0;
      dev->reg.find_reg(0x1f).value = 0x10;
      dev->reg.find_reg(0x20).value = 0x20;
      break;
    case SensorId::CCD_HP2400:
      dev->reg.find_reg(0x1e).value = 0x80;
      dev->reg.find_reg(0x1f).value = 0x10;
      dev->reg.find_reg(0x20).value = 0x20;
      break;
    case SensorId::CCD_HP3670:
      dev->reg.find_reg(0x19).value = 0x2a;
      dev->reg.find_reg(0x1e).value = 0x80;
      dev->reg.find_reg(0x1f).value = 0x10;
      dev->reg.find_reg(0x20).value = 0x20;
      break;
    case SensorId::CIS_XP200:
      dev->reg.find_reg(0x1e).value = 0x10;
      dev->reg.find_reg(0x1f).value = 0x01;
      dev->reg.find_reg(0x20).value = 0x50;
      break;
    default:
      dev->reg.find_reg(0x1f).value = 0x01;
      dev->reg.find_reg(0x20).value = 0x50;
      break;
    }

  dev->reg.find_reg(0x21).value = 0x08 /*0x20 */ ;	/* table one steps number for forward slope curve of the acc/dec */
  dev->reg.find_reg(0x22).value = 0x10 /*0x08 */ ;	/* steps number of the forward steps for start/stop */
  dev->reg.find_reg(0x23).value = 0x10 /*0x08 */ ;	/* steps number of the backward steps for start/stop */
  dev->reg.find_reg(0x24).value = 0x08 /*0x20 */ ;	/* table one steps number backward slope curve of the acc/dec */
  dev->reg.find_reg(0x25).value = 0x00;	/* scan line numbers (7000) */
  dev->reg.find_reg(0x26).value = 0x00 /*0x1b */ ;
  dev->reg.find_reg(0x27).value = 0xd4 /*0x58 */ ;
  dev->reg.find_reg(0x28).value = 0x01;	/* PWM duty for lamp control */
  dev->reg.find_reg(0x29).value = 0xff;

  dev->reg.find_reg(0x2c).value = 0x02;	/* set resolution (600 DPI) */
  dev->reg.find_reg(0x2d).value = 0x58;
  dev->reg.find_reg(0x2e).value = 0x78;	/* set black&white threshold high level */
  dev->reg.find_reg(0x2f).value = 0x7f;	/* set black&white threshold low level */

  dev->reg.find_reg(0x30).value = 0x00;	/* begin pixel position (16) */
  dev->reg.find_reg(0x31).value = sensor.dummy_pixel /*0x10 */ ;	/* TGW + 2*TG_SHLD + x  */
  dev->reg.find_reg(0x32).value = 0x2a /*0x15 */ ;	/* end pixel position (5390) */
  dev->reg.find_reg(0x33).value = 0xf8 /*0x0e */ ;	/* TGW + 2*TG_SHLD + y   */
  dev->reg.find_reg(0x34).value = sensor.dummy_pixel;
  dev->reg.find_reg(0x35).value = 0x01 /*0x00 */ ;	/* set maximum word size per line, for buffer full control (10800) */
  dev->reg.find_reg(0x36).value = 0x00 /*0x2a */ ;
  dev->reg.find_reg(0x37).value = 0x00 /*0x30 */ ;
  dev->reg.find_reg(0x38).value = 0x2a; // line period (exposure time = 11000 pixels) */
  dev->reg.find_reg(0x39).value = 0xf8;
  dev->reg.find_reg(0x3d).value = 0x00;	/* set feed steps number of motor move */
  dev->reg.find_reg(0x3e).value = 0x00;
  dev->reg.find_reg(0x3f).value = 0x01 /*0x00 */ ;

  dev->reg.find_reg(0x60).value = 0x00;	/* Z1MOD, 60h:61h:(6D b5:b3), remainder for start/stop */
  dev->reg.find_reg(0x61).value = 0x00;	/* (21h+22h)/LPeriod */
  dev->reg.find_reg(0x62).value = 0x00;	/* Z2MODE, 62h:63h:(6D b2:b0), remainder for start scan */
  dev->reg.find_reg(0x63).value = 0x00;	/* (3Dh+3Eh+3Fh)/LPeriod for one-table mode,(21h+1Fh)/LPeriod */
  dev->reg.find_reg(0x64).value = 0x00;	/* motor PWM frequency */
  dev->reg.find_reg(0x65).value = 0x00;	/* PWM duty cycle for table one motor phase (63 = max) */
    if (dev->model->motor_id == MotorId::MD_5345) {
        // PWM duty cycle for table one motor phase (63 = max)
        dev->reg.find_reg(0x65).value = 0x02;
    }

    for (const auto& reg : dev->gpo.regs) {
        dev->reg.set8(reg.address, reg.value);
    }

    switch (dev->model->motor_id) {
        case MotorId::HP2300:
        case MotorId::HP2400:
      dev->reg.find_reg(0x6a).value = 0x7f;	/* table two steps number for acc/dec */
      dev->reg.find_reg(0x6b).value = 0x78;	/* table two steps number for acc/dec */
      dev->reg.find_reg(0x6d).value = 0x7f;
      break;
        case MotorId::MD_5345:
      dev->reg.find_reg(0x6a).value = 0x42;	/* table two fast moving step type, PWM duty for table two */
      dev->reg.find_reg(0x6b).value = 0xff;	/* table two steps number for acc/dec */
      dev->reg.find_reg(0x6d).value = 0x41;	/* select deceleration steps whenever go home (0), accel/decel stop time (31 * LPeriod) */
      break;
        case MotorId::XP200:
      dev->reg.find_reg(0x6a).value = 0x7f;	/* table two fast moving step type, PWM duty for table two */
      dev->reg.find_reg(0x6b).value = 0x08;	/* table two steps number for acc/dec */
      dev->reg.find_reg(0x6d).value = 0x01;	/* select deceleration steps whenever go home (0), accel/decel stop time (31 * LPeriod) */
      break;
        case MotorId::HP3670:
      dev->reg.find_reg(0x6a).value = 0x41;	/* table two steps number for acc/dec */
      dev->reg.find_reg(0x6b).value = 0xc8;	/* table two steps number for acc/dec */
      dev->reg.find_reg(0x6d).value = 0x7f;
      break;
        default:
      dev->reg.find_reg(0x6a).value = 0x40;	/* table two fast moving step type, PWM duty for table two */
      dev->reg.find_reg(0x6b).value = 0xff;	/* table two steps number for acc/dec */
      dev->reg.find_reg(0x6d).value = 0x01;	/* select deceleration steps whenever go home (0), accel/decel stop time (31 * LPeriod) */
      break;
    }
  dev->reg.find_reg(0x6c).value = 0x00;	/* period times for LPeriod, expR,expG,expB, Z1MODE, Z2MODE (one period time) */
}

// Set values of Analog Device type frontend
static void gl646_set_ad_fe(Genesys_Device* dev, std::uint8_t set)
{
    DBG_HELPER(dbg);
  int i;

    if (set == AFE_INIT) {

        dev->frontend = dev->frontend_initial;

        // write them to analog frontend
        dev->interface->write_fe_register(0x00, dev->frontend.regs.get_value(0x00));
        dev->interface->write_fe_register(0x01, dev->frontend.regs.get_value(0x01));
    }
  if (set == AFE_SET)
    {
        for (i = 0; i < 3; i++) {
            dev->interface->write_fe_register(0x02 + i, dev->frontend.get_gain(i));
        }
        for (i = 0; i < 3; i++) {
            dev->interface->write_fe_register(0x05 + i, dev->frontend.get_offset(i));
        }
    }
  /*
     if (set == AFE_POWER_SAVE)
     {
        dev->interface->write_fe_register(0x00, dev->frontend.reg[0] | 0x04);
     } */
}

/** set up analog frontend
 * set up analog frontend
 * @param dev device to set up
 * @param set action from AFE_SET, AFE_INIT and AFE_POWERSAVE
 * @param dpi resolution of the scan since it affects settings
 */
static void gl646_wm_hp3670(Genesys_Device* dev, const Genesys_Sensor& sensor, std::uint8_t set,
                            unsigned dpi)
{
    DBG_HELPER(dbg);
  int i;

  switch (set)
    {
    case AFE_INIT:
        dev->interface->write_fe_register(0x04, 0x80);
        dev->interface->sleep_ms(200);
    dev->interface->write_register(0x50, 0x00);
      dev->frontend = dev->frontend_initial;
        dev->interface->write_fe_register(0x01, dev->frontend.regs.get_value(0x01));
        dev->interface->write_fe_register(0x02, dev->frontend.regs.get_value(0x02));
        gl646_gpio_output_enable(dev->interface->get_usb_device(), 0x07);
      break;
    case AFE_POWER_SAVE:
        dev->interface->write_fe_register(0x01, 0x06);
        dev->interface->write_fe_register(0x06, 0x0f);
            return;
      break;
    default:			/* AFE_SET */
      /* mode setup */
      i = dev->frontend.regs.get_value(0x03);
            if (dpi > sensor.full_resolution / 2) {
      /* fe_reg_0x03 must be 0x12 for 1200 dpi in WOLFSON_HP3670.
       * WOLFSON_HP2400 in 1200 dpi mode works well with
	   * fe_reg_0x03 set to 0x32 or 0x12 but not to 0x02 */
	  i = 0x12;
	}
        dev->interface->write_fe_register(0x03, i);
      /* offset and sign (or msb/lsb ?) */
        for (i = 0; i < 3; i++) {
            dev->interface->write_fe_register(0x20 + i, dev->frontend.get_offset(i));
            dev->interface->write_fe_register(0x24 + i, dev->frontend.regs.get_value(0x24 + i));
        }

        // gain
        for (i = 0; i < 3; i++) {
            dev->interface->write_fe_register(0x28 + i, dev->frontend.get_gain(i));
        }
    }
}

/** Set values of analog frontend
 * @param dev device to set
 * @param set action to execute
 * @param dpi dpi to setup the AFE
 */
static void gl646_set_fe(Genesys_Device* dev, const Genesys_Sensor& sensor, std::uint8_t set,
                         int dpi)
{
    DBG_HELPER_ARGS(dbg, "%s,%d", set == AFE_INIT ? "init" :
                                  set == AFE_SET ? "set" :
                                  set == AFE_POWER_SAVE ? "powersave" : "huh?", dpi);
  int i;
    std::uint8_t val;

  /* Analog Device type frontend */
    std::uint8_t frontend_type = dev->reg.find_reg(0x04).value & REG_0x04_FESET;
    if (frontend_type == 0x02) {
        gl646_set_ad_fe(dev, set);
        return;
    }

  /* Wolfson type frontend */
    if (frontend_type != 0x03) {
        throw SaneException("unsupported frontend type %d", frontend_type);
    }

  /* per frontend function to keep code clean */
  switch (dev->model->adc_id)
    {
    case AdcId::WOLFSON_HP3670:
    case AdcId::WOLFSON_HP2400:
            gl646_wm_hp3670(dev, sensor, set, dpi);
            return;
    default:
      DBG(DBG_proc, "%s(): using old method\n", __func__);
      break;
    }

  /* initialize analog frontend */
    if (set == AFE_INIT) {
        dev->frontend = dev->frontend_initial;

        // reset only done on init
        dev->interface->write_fe_register(0x04, 0x80);

      /* enable GPIO for some models */
        if (dev->model->sensor_id == SensorId::CCD_HP2300) {
	  val = 0x07;
            gl646_gpio_output_enable(dev->interface->get_usb_device(), val);
	}
        return;
    }

    // set fontend to power saving mode
    if (set == AFE_POWER_SAVE) {
        dev->interface->write_fe_register(0x01, 0x02);
        return;
    }

  /* here starts AFE_SET */
  /* TODO :  base this test on cfg reg3 or a CCD family flag to be created */
  /* if (dev->model->ccd_type != SensorId::CCD_HP2300
     && dev->model->ccd_type != SensorId::CCD_HP3670
     && dev->model->ccd_type != SensorId::CCD_HP2400) */
  {
        dev->interface->write_fe_register(0x00, dev->frontend.regs.get_value(0x00));
        dev->interface->write_fe_register(0x02, dev->frontend.regs.get_value(0x02));
  }

    // start with reg3
    dev->interface->write_fe_register(0x03, dev->frontend.regs.get_value(0x03));

  switch (dev->model->sensor_id)
    {
    default:
            for (i = 0; i < 3; i++) {
                dev->interface->write_fe_register(0x24 + i, dev->frontend.regs.get_value(0x24 + i));
                dev->interface->write_fe_register(0x28 + i, dev->frontend.get_gain(i));
                dev->interface->write_fe_register(0x20 + i, dev->frontend.get_offset(i));
            }
      break;
      /* just can't have it to work ....
         case SensorId::CCD_HP2300:
         case SensorId::CCD_HP2400:
         case SensorId::CCD_HP3670:

        dev->interface->write_fe_register(0x23, dev->frontend.get_offset(1));
        dev->interface->write_fe_register(0x28, dev->frontend.get_gain(1));
         break; */
    }

    // end with reg1
    dev->interface->write_fe_register(0x01, dev->frontend.regs.get_value(0x01));
}

/** Set values of analog frontend
 * this this the public interface, the gl646 as to use one more
 * parameter to work effectively, hence the redirection
 * @param dev device to set
 * @param set action to execute
 */
void CommandSetGl646::set_fe(Genesys_Device* dev, const Genesys_Sensor& sensor,
                             std::uint8_t set) const
{
    gl646_set_fe(dev, sensor, set, dev->settings.yres);
}

/**
 * enters or leaves power saving mode
 * limited to AFE for now.
 * @param dev scanner's device
 * @param enable true to enable power saving, false to leave it
 */
void CommandSetGl646::save_power(Genesys_Device* dev, bool enable) const
{
    DBG_HELPER_ARGS(dbg, "enable = %d", enable);

  const auto& sensor = sanei_genesys_find_sensor_any(dev);

  if (enable)
    {
        // gl646_set_fe(dev, sensor, AFE_POWER_SAVE);
    }
  else
    {
      gl646_set_fe(dev, sensor, AFE_INIT, 0);
    }
}

void CommandSetGl646::set_powersaving(Genesys_Device* dev, int delay /* in minutes */) const
{
    DBG_HELPER_ARGS(dbg, "delay = %d", delay);
  Genesys_Register_Set local_reg(Genesys_Register_Set::SEQUENTIAL);
  int rate, exposure_time, tgtime, time;

  local_reg.init_reg(0x01, dev->reg.get8(0x01));	// disable fastmode
  local_reg.init_reg(0x03, dev->reg.get8(0x03));        // Lamp power control
    local_reg.init_reg(0x05, dev->reg.get8(0x05) & ~REG_0x05_BASESEL);   // 24 clocks/pixel
  local_reg.init_reg(0x38, 0x00); // line period low
  local_reg.init_reg(0x39, 0x00); //line period high
  local_reg.init_reg(0x6c, 0x00); // period times for LPeriod, expR,expG,expB, Z1MODE, Z2MODE

  if (!delay)
    local_reg.find_reg(0x03).value &= 0xf0;	/* disable lampdog and set lamptime = 0 */
  else if (delay < 20)
    local_reg.find_reg(0x03).value = (local_reg.get8(0x03) & 0xf0) | 0x09;	/* enable lampdog and set lamptime = 1 */
  else
    local_reg.find_reg(0x03).value = (local_reg.get8(0x03) & 0xf0) | 0x0f;	/* enable lampdog and set lamptime = 7 */

  time = delay * 1000 * 60;	/* -> msec */
    exposure_time = static_cast<std::uint32_t>((time * 32000.0 /
                (24.0 * 64.0 * (local_reg.get8(0x03) & REG_0x03_LAMPTIM) *
         1024.0) + 0.5));
  /* 32000 = system clock, 24 = clocks per pixel */
  rate = (exposure_time + 65536) / 65536;
  if (rate > 4)
    {
      rate = 8;
      tgtime = 3;
    }
  else if (rate > 2)
    {
      rate = 4;
      tgtime = 2;
    }
  else if (rate > 1)
    {
      rate = 2;
      tgtime = 1;
    }
  else
    {
      rate = 1;
      tgtime = 0;
    }

  local_reg.find_reg(0x6c).value |= tgtime << 6;
  exposure_time /= rate;

  if (exposure_time > 65535)
    exposure_time = 65535;

  local_reg.find_reg(0x38).value = exposure_time / 256;
  local_reg.find_reg(0x39).value = exposure_time & 255;

    dev->interface->write_registers(local_reg);
}


/**
 * loads document into scanner
 * currently only used by XP200
 * bit2 (0x04) of gpio is paper event (document in/out) on XP200
 * HOMESNR is set if no document in front of sensor, the sequence of events is
 * paper event -> document is in the sheet feeder
 * HOMESNR becomes 0 -> document reach sensor
 * HOMESNR becomes 1 ->document left sensor
 * paper event -> document is out
 */
void CommandSetGl646::load_document(Genesys_Device* dev) const
{
    DBG_HELPER(dbg);

  // FIXME: sequential not really needed in this case
  Genesys_Register_Set regs(Genesys_Register_Set::SEQUENTIAL);
    unsigned count;

  /* no need to load document is flatbed scanner */
    if (!dev->model->is_sheetfed) {
      DBG(DBG_proc, "%s: nothing to load\n", __func__);
      DBG(DBG_proc, "%s: end\n", __func__);
      return;
    }

    auto status = scanner_read_status(*dev);

    // home sensor is set if a document is inserted
    if (status.is_at_home) {
      /* if no document, waits for a paper event to start loading */
      /* with a 60 seconde minutes timeout                        */
      count = 0;
        std::uint8_t val = 0;
        do {
            gl646_gpio_read(dev->interface->get_usb_device(), &val);

	  DBG(DBG_info, "%s: GPIO=0x%02x\n", __func__, val);
	  if ((val & 0x04) != 0x04)
	    {
              DBG(DBG_warn, "%s: no paper detected\n", __func__);
	    }
            dev->interface->sleep_ms(200);
            count++;
        }
      while (((val & 0x04) != 0x04) && (count < 300));	/* 1 min time out */
      if (count == 300)
	{
        throw SaneException(SANE_STATUS_NO_DOCS, "timeout waiting for document");
    }
    }

  /* set up to fast move before scan then move until document is detected */
  regs.init_reg(0x01, 0x90);

  /* AGOME, 2 slopes motor moving */
  regs.init_reg(0x02, 0x79);

  /* motor feeding steps to 0 */
  regs.init_reg(0x3d, 0);
  regs.init_reg(0x3e, 0);
  regs.init_reg(0x3f, 0);

  /* 50 fast moving steps */
  regs.init_reg(0x6b, 50);

  /* set GPO */
  regs.init_reg(0x66, 0x30);

  /* stesp NO */
  regs.init_reg(0x21, 4);
  regs.init_reg(0x22, 1);
  regs.init_reg(0x23, 1);
  regs.init_reg(0x24, 4);

  /* generate slope table 2 */
    auto slope_table = create_slope_table_for_speed(MotorSlope::create_from_steps(6000, 2400, 50),
                                                    2400, StepType::FULL, 1, 4,
                                                    get_slope_table_max_size(AsicType::GL646));
    // document loading:
    // send regs
    // start motor
    // wait e1 status to become e0
    const auto& sensor = sanei_genesys_find_sensor_any(dev);
    scanner_send_slope_table(dev, sensor, 1, slope_table.table);

    dev->interface->write_registers(regs);

    scanner_start_action(*dev, true);

  count = 0;
  do
    {
        status = scanner_read_status(*dev);
        dev->interface->sleep_ms(200);
      count++;
    } while (status.is_motor_enabled && (count < 300));

  if (count == 300)
    {
      throw SaneException(SANE_STATUS_JAMMED, "can't load document");
    }

  /* when loading OK, document is here */
    dev->document = true;

  /* set up to idle */
  regs.set8(0x02, 0x71);
  regs.set8(0x3f, 1);
  regs.set8(0x6b, 8);
    dev->interface->write_registers(regs);
}

/**
 * detects end of document and adjust current scan
 * to take it into account
 * used by sheetfed scanners
 */
void CommandSetGl646::detect_document_end(Genesys_Device* dev) const
{
    DBG_HELPER(dbg);
    std::uint8_t gpio;
    unsigned int bytes_left;

    // test for document presence
    scanner_read_print_status(*dev);

    gl646_gpio_read(dev->interface->get_usb_device(), &gpio);
  DBG(DBG_info, "%s: GPIO=0x%02x\n", __func__, gpio);

  /* detect document event. There one event when the document go in,
   * then another when it leaves */
    if (dev->document && (gpio & 0x04) && (dev->total_bytes_read > 0)) {
      DBG(DBG_info, "%s: no more document\n", __func__);
        dev->document = false;

      /* adjust number of bytes to read:
       * total_bytes_to_read is the number of byte to send to frontend
       * total_bytes_read is the number of bytes sent to frontend
       * read_bytes_left is the number of bytes to read from the scanner
       */
      DBG(DBG_io, "%s: total_bytes_to_read=%zu\n", __func__, dev->total_bytes_to_read);
      DBG(DBG_io, "%s: total_bytes_read   =%zu\n", __func__, dev->total_bytes_read);

        // amount of data available from scanner is what to scan
        sanei_genesys_read_valid_words(dev, &bytes_left);

        unsigned lines_in_buffer = bytes_left / dev->session.output_line_bytes_raw;

        // we add the number of lines needed to read the last part of the document in
        unsigned lines_offset = static_cast<unsigned>(
                (dev->model->y_offset * dev->session.params.yres) / MM_PER_INCH);

        unsigned remaining_lines = lines_in_buffer + lines_offset;

        bytes_left = remaining_lines * dev->session.output_line_bytes_raw;

        if (bytes_left < dev->get_pipeline_source().remaining_bytes()) {
            dev->get_pipeline_source().set_remaining_bytes(bytes_left);
            dev->total_bytes_to_read = dev->total_bytes_read + bytes_left;
        }
      DBG(DBG_io, "%s: total_bytes_to_read=%zu\n", __func__, dev->total_bytes_to_read);
      DBG(DBG_io, "%s: total_bytes_read   =%zu\n", __func__, dev->total_bytes_read);
    }
}

/**
 * eject document from the feeder
 * currently only used by XP200
 * TODO we currently rely on AGOHOME not being set for sheetfed scanners,
 * maybe check this flag in eject to let the document being eject automatically
 */
void CommandSetGl646::eject_document(Genesys_Device* dev) const
{
    DBG_HELPER(dbg);

  // FIXME: SEQUENTIAL not really needed in this case
  Genesys_Register_Set regs((Genesys_Register_Set::SEQUENTIAL));
    unsigned count;
    std::uint8_t gpio;

  /* at the end there will be no more document */
    dev->document = false;

    // first check for document event
    gl646_gpio_read(dev->interface->get_usb_device(), &gpio);

  DBG(DBG_info, "%s: GPIO=0x%02x\n", __func__, gpio);

    // test status : paper event + HOMESNR -> no more doc ?
    auto status = scanner_read_status(*dev);

    // home sensor is set when document is inserted
    if (status.is_at_home) {
        dev->document = false;
        DBG(DBG_info, "%s: no more document to eject\n", __func__);
        return;
    }

    // there is a document inserted, eject it
    dev->interface->write_register(0x01, 0xb0);

  /* wait for motor to stop */
    do {
        dev->interface->sleep_ms(200);
        status = scanner_read_status(*dev);
    }
    while (status.is_motor_enabled);

  /* set up to fast move before scan then move until document is detected */
  regs.init_reg(0x01, 0xb0);

  /* AGOME, 2 slopes motor moving , eject 'backward' */
  regs.init_reg(0x02, 0x5d);

  /* motor feeding steps to 119880 */
  regs.init_reg(0x3d, 1);
  regs.init_reg(0x3e, 0xd4);
  regs.init_reg(0x3f, 0x48);

  /* 60 fast moving steps */
  regs.init_reg(0x6b, 60);

  /* set GPO */
  regs.init_reg(0x66, 0x30);

  /* stesp NO */
  regs.init_reg(0x21, 4);
  regs.init_reg(0x22, 1);
  regs.init_reg(0x23, 1);
  regs.init_reg(0x24, 4);

  /* generate slope table 2 */
    auto slope_table = create_slope_table_for_speed(MotorSlope::create_from_steps(10000, 1600, 60),
                                                    1600, StepType::FULL, 1, 4,
                                                    get_slope_table_max_size(AsicType::GL646));
    // document eject:
    // send regs
    // start motor
    // wait c1 status to become c8 : HOMESNR and ~MOTFLAG
    // FIXME: sensor is not used.
    const auto& sensor = sanei_genesys_find_sensor_any(dev);
    scanner_send_slope_table(dev, sensor, 1, slope_table.table);

    dev->interface->write_registers(regs);

    scanner_start_action(*dev, true);

  /* loop until paper sensor tells paper is out, and till motor is running */
  /* use a 30 timeout */
  count = 0;
    do {
        status = scanner_read_status(*dev);

        dev->interface->sleep_ms(200);
      count++;
    } while (!status.is_at_home && (count < 150));

    // read GPIO on exit
    gl646_gpio_read(dev->interface->get_usb_device(), &gpio);

  DBG(DBG_info, "%s: GPIO=0x%02x\n", __func__, gpio);
}

// Send the low-level scan command
void CommandSetGl646::begin_scan(Genesys_Device* dev, const Genesys_Sensor& sensor,
                                 Genesys_Register_Set* reg, bool start_motor) const
{
    DBG_HELPER(dbg);
    (void) sensor;
  // FIXME: SEQUENTIAL not really needed in this case
  Genesys_Register_Set local_reg(Genesys_Register_Set::SEQUENTIAL);

    local_reg.init_reg(0x03, reg->get8(0x03));
    local_reg.init_reg(0x01, reg->get8(0x01) | REG_0x01_SCAN);

    if (start_motor) {
        local_reg.init_reg(0x0f, 0x01);
    } else {
        local_reg.init_reg(0x0f, 0x00); // do not start motor yet
    }

    dev->interface->write_registers(local_reg);

    dev->advance_head_pos_by_session(ScanHeadId::PRIMARY);
}


// Send the stop scan command
static void end_scan_impl(Genesys_Device* dev, Genesys_Register_Set* reg, bool check_stop,
                          bool eject)
{
    DBG_HELPER_ARGS(dbg, "check_stop = %d, eject = %d", check_stop, eject);

    scanner_stop_action_no_move(*dev, *reg);

    unsigned wait_limit_seconds = 30;

  /* for sheetfed scanners, we may have to eject document */
    if (dev->model->is_sheetfed) {
        if (eject && dev->document) {
            dev->cmd_set->eject_document(dev);
        }
        wait_limit_seconds = 3;
    }

    if (is_testing_mode()) {
        return;
    }

    dev->interface->sleep_ms(100);

    if (check_stop) {
        for (unsigned i = 0; i < wait_limit_seconds * 10; i++) {
            if (scanner_is_motor_stopped(*dev)) {
                return;
            }

            dev->interface->sleep_ms(100);
        }
        throw SaneException(SANE_STATUS_IO_ERROR, "could not stop motor");
    }
}

// Send the stop scan command
void CommandSetGl646::end_scan(Genesys_Device* dev, Genesys_Register_Set* reg,
                               bool check_stop) const
{
    end_scan_impl(dev, reg, check_stop, false);
}

/**
 * parks head
 * @param dev scanner's device
 * @param wait_until_home true if the function waits until head parked
 */
void CommandSetGl646::move_back_home(Genesys_Device* dev, bool wait_until_home) const
{
    DBG_HELPER_ARGS(dbg, "wait_until_home = %d\n", wait_until_home);
  int i;
  int loop = 0;

    auto status = scanner_read_status(*dev);

    if (status.is_at_home) {
      DBG(DBG_info, "%s: end since already at home\n", __func__);
        dev->set_head_pos_zero(ScanHeadId::PRIMARY);
        return;
    }

  /* stop motor if needed */
    if (status.is_motor_enabled) {
        gl646_stop_motor(dev);
        dev->interface->sleep_ms(200);
    }

  /* when scanhead is moving then wait until scanhead stops or timeout */
  DBG(DBG_info, "%s: ensuring that motor is off\n", __func__);
    for (i = 400; i > 0; i--) {
        // do not wait longer than 40 seconds, count down to get i = 0 when busy

        status = scanner_read_status(*dev);

        if (!status.is_motor_enabled && status.is_at_home) {
            DBG(DBG_info, "%s: already at home and not moving\n", __func__);
            dev->set_head_pos_zero(ScanHeadId::PRIMARY);
            return;
        }
        if (!status.is_motor_enabled) {
            break;
        }

        dev->interface->sleep_ms(100);
    }

  if (!i)			/* the loop counted down to 0, scanner still is busy */
    {
        dev->set_head_pos_unknown(ScanHeadId::PRIMARY | ScanHeadId::SECONDARY);
        throw SaneException(SANE_STATUS_DEVICE_BUSY, "motor is still on: device busy");
    }

    // setup for a backward scan of 65535 steps, with no actual data reading
    auto resolution = sanei_genesys_get_lowest_dpi(dev);

    const auto& sensor = sanei_genesys_find_sensor(dev, resolution, 3,
                                                   dev->model->default_method);

    ScanSession session;
    session.params.xres = resolution;
    session.params.yres = resolution;
    session.params.startx = 0;
    session.params.starty = 65535;
    session.params.pixels = 600;
    session.params.lines = 1;
    session.params.depth = 8;
    session.params.channels = 3;
    session.params.scan_method = dev->model->default_method;
    session.params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS;
    session.params.color_filter = ColorFilter::RED;
    session.params.contrast_adjustment = dev->settings.contrast;
    session.params.brightness_adjustment = dev->settings.brightness;
    session.params.flags = ScanFlag::REVERSE |
                           ScanFlag::AUTO_GO_HOME |
                           ScanFlag::DISABLE_GAMMA;
    if (dev->model->default_method == ScanMethod::TRANSPARENCY) {
        session.params.flags |= ScanFlag::USE_XPA;
    }
    compute_session(dev, session, sensor);

    init_regs_for_scan_session(dev, sensor, &dev->reg, session);

  /* backward , no actual data scanned TODO more setup flags to avoid this register manipulations ? */
    regs_set_optical_off(dev->model->asic_type, dev->reg);

    // sets frontend
    gl646_set_fe(dev, sensor, AFE_SET, resolution);

  /* write scan registers */
    try {
        dev->interface->write_registers(dev->reg);
    } catch (...) {
        DBG(DBG_error, "%s: failed to bulk write registers\n", __func__);
    }

  /* registers are restored to an iddl state, give up if no head to park */
    if (dev->model->is_sheetfed) {
        return;
    }

    // starts scan
    {
        // this is effectively the same as dev->cmd_set->begin_scan(dev, sensor, &dev->reg, true);
        // except that we don't modify the head position calculations

        // FIXME: SEQUENTIAL not really needed in this case
        Genesys_Register_Set scan_local_reg(Genesys_Register_Set::SEQUENTIAL);

        scan_local_reg.init_reg(0x03, dev->reg.get8(0x03));
        scan_local_reg.init_reg(0x01, dev->reg.get8(0x01) | REG_0x01_SCAN);
        scan_local_reg.init_reg(0x0f, 0x01);

        dev->interface->write_registers(scan_local_reg);
    }

    if (is_testing_mode()) {
        dev->interface->test_checkpoint("move_back_home");
        dev->set_head_pos_zero(ScanHeadId::PRIMARY);
        return;
    }

  /* loop until head parked */
  if (wait_until_home)
    {
      while (loop < 300)		/* do not wait longer then 30 seconds */
	{
            auto status = scanner_read_status(*dev);

            if (status.is_at_home) {
	      DBG(DBG_info, "%s: reached home position\n", __func__);
                dev->interface->sleep_ms(500);
                dev->set_head_pos_zero(ScanHeadId::PRIMARY);
                return;
            }
            dev->interface->sleep_ms(100);
            ++loop;
        }

        // when we come here then the scanner needed too much time for this, so we better
        // stop the motor
        catch_all_exceptions(__func__, [&](){ gl646_stop_motor (dev); });
        catch_all_exceptions(__func__, [&](){ end_scan_impl(dev, &dev->reg, true, false); });
        dev->set_head_pos_unknown(ScanHeadId::PRIMARY | ScanHeadId::SECONDARY);
        throw SaneException(SANE_STATUS_IO_ERROR, "timeout while waiting for scanhead to go home");
    }


  DBG(DBG_info, "%s: scanhead is still moving\n", __func__);
}

/**
 * init registers for shading calibration
 * we assume that scanner's head is on an area suiting shading calibration.
 * We scan a full scan width area by the shading line number for the device
 */
void CommandSetGl646::init_regs_for_shading(Genesys_Device* dev, const Genesys_Sensor& sensor,
                                            Genesys_Register_Set& regs) const
{
    DBG_HELPER(dbg);
    (void) regs;

  /* fill settings for scan : always a color scan */
  int channels = 3;

    unsigned cksel = get_cksel(dev->model->sensor_id, dev->settings.xres, channels);

    unsigned resolution = sensor.get_optical_resolution() / cksel;
    // FIXME: we select wrong calibration sensor
    const auto& calib_sensor = sanei_genesys_find_sensor(dev, dev->settings.xres, channels,
                                                         dev->settings.scan_method);

    auto pixels = dev->model->x_size_calib_mm * resolution / MM_PER_INCH;

    unsigned calib_lines =
            static_cast<unsigned>(dev->model->y_size_calib_mm * resolution / MM_PER_INCH);

    ScanSession session;
    session.params.xres = resolution;
    session.params.yres = resolution;
    session.params.startx = 0;
    session.params.starty = 0;
    session.params.pixels = pixels;
    session.params.lines = calib_lines;
    session.params.depth = 16;
    session.params.channels = channels;
    session.params.scan_method = dev->settings.scan_method;
    session.params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS;
    session.params.color_filter = dev->settings.color_filter;
    session.params.contrast_adjustment = dev->settings.contrast;
    session.params.brightness_adjustment = dev->settings.brightness;
    session.params.flags = ScanFlag::DISABLE_SHADING |
                           ScanFlag::DISABLE_GAMMA |
                           ScanFlag::IGNORE_COLOR_OFFSET |
                           ScanFlag::IGNORE_STAGGER_OFFSET;
    if (dev->settings.scan_method == ScanMethod::TRANSPARENCY) {
        session.params.flags |= ScanFlag::USE_XPA;
    }
    compute_session(dev, session, calib_sensor);

    dev->cmd_set->init_regs_for_scan_session(dev, calib_sensor, &dev->reg, session);

    dev->calib_session = session;

  /* no shading */
    dev->reg.find_reg(0x02).value |= REG_0x02_ACDCDIS;	/* ease backtracking */
    dev->reg.find_reg(0x02).value &= ~REG_0x02_FASTFED;
  sanei_genesys_set_motor_power(dev->reg, false);
}

bool CommandSetGl646::needs_home_before_init_regs_for_scan(Genesys_Device* dev) const
{
    return dev->is_head_pos_known(ScanHeadId::PRIMARY) &&
            dev->head_pos(ScanHeadId::PRIMARY) &&
            dev->settings.scan_method == ScanMethod::FLATBED;
}

/**
 * this function send gamma table to ASIC
 */
void CommandSetGl646::send_gamma_table(Genesys_Device* dev, const Genesys_Sensor& sensor) const
{
    DBG_HELPER(dbg);
  int size;
  int address;
  int bits;

     if (has_flag(dev->model->flags, ModelFlag::GAMMA_14BIT)) {
      size = 16384;
      bits = 14;
    }
  else
    {
      size = 4096;
      bits = 12;
    }

    auto gamma = generate_gamma_buffer(dev, sensor, bits, size-1, size);

  /* table address */
  switch (dev->reg.find_reg(0x05).value >> 6)
    {
    case 0:			/* 600 dpi */
      address = 0x09000;
      break;
    case 1:			/* 1200 dpi */
      address = 0x11000;
      break;
    case 2:			/* 2400 dpi */
      address = 0x20000;
      break;
    default:
            throw SaneException("invalid dpi");
    }

    dev->interface->write_buffer(0x3c, address, gamma.data(), size * 2 * 3);
}

/** @brief this function does the led calibration.
 * this function does the led calibration by scanning one line of the calibration
 * area below scanner's top on white strip. The scope of this function is
 * currently limited to the XP200
 */
SensorExposure CommandSetGl646::led_calibration(Genesys_Device* dev, const Genesys_Sensor& sensor,
                                                Genesys_Register_Set& regs) const
{
    DBG_HELPER(dbg);
    (void) regs;
  unsigned int i, j;
  int val;
  int avg[3], avga, avge;
  int turn;
    std::uint16_t expr, expg, expb;

    unsigned channels = dev->settings.get_channels();

    ScanColorMode scan_mode = ScanColorMode::COLOR_SINGLE_PASS;
    if (dev->settings.scan_mode != ScanColorMode::COLOR_SINGLE_PASS) {
        scan_mode = ScanColorMode::GRAY;
    }

    // offset calibration is always done in color mode
    unsigned pixels = dev->model->x_size_calib_mm * sensor.full_resolution / MM_PER_INCH;

    ScanSession session;
    session.params.xres = sensor.full_resolution;
    session.params.yres = sensor.full_resolution;
    session.params.startx = 0;
    session.params.starty = 0;
    session.params.pixels = pixels;
    session.params.lines = 1;
    session.params.depth = 16;
    session.params.channels = channels;
    session.params.scan_method = dev->settings.scan_method;
    session.params.scan_mode = scan_mode;
    session.params.color_filter = ColorFilter::RED;
    session.params.contrast_adjustment = dev->settings.contrast;
    session.params.brightness_adjustment = dev->settings.brightness;
    session.params.flags = ScanFlag::DISABLE_SHADING;
    if (dev->settings.scan_method == ScanMethod::TRANSPARENCY) {
        session.params.flags |= ScanFlag::USE_XPA;
    }
    compute_session(dev, session, sensor);

    // colors * bytes_per_color * scan lines
    unsigned total_size = pixels * channels * 2 * 1;

    std::vector<std::uint8_t> line(total_size);

/*
   we try to get equal bright leds here:

   loop:
     average per color
     adjust exposure times
 */
  expr = sensor.exposure.red;
  expg = sensor.exposure.green;
  expb = sensor.exposure.blue;

  turn = 0;

    auto calib_sensor = sensor;

    bool acceptable = false;
    do {
        calib_sensor.exposure.red = expr;
        calib_sensor.exposure.green = expg;
        calib_sensor.exposure.blue = expb;

      DBG(DBG_info, "%s: starting first line reading\n", __func__);

        dev->cmd_set->init_regs_for_scan_session(dev, calib_sensor, &dev->reg, session);
        simple_scan(dev, calib_sensor, session, false, line, "led_calibration");

        if (is_testing_mode()) {
            return calib_sensor.exposure;
        }

        if (dbg_log_image_data()) {
            char fn[30];
            std::snprintf(fn, 30, "gl646_led_%02d.tiff", turn);
            write_tiff_file(fn, line.data(), 16, channels, pixels, 1);
        }

        acceptable = true;

      for (j = 0; j < channels; j++)
	{
	  avg[j] = 0;
            for (i = 0; i < pixels; i++) {
                if (dev->model->is_cis) {
                    val = line[i * 2 + j * 2 * pixels + 1] * 256 + line[i * 2 + j * 2 * pixels];
                } else {
                    val = line[i * 2 * channels + 2 * j + 1] * 256 + line[i * 2 * channels + 2 * j];
                }
            avg[j] += val;
	    }

      avg[j] /= pixels;
	}

      DBG(DBG_info, "%s: average: %d,%d,%d\n", __func__, avg[0], avg[1], avg[2]);

        acceptable = true;

      if (!acceptable)
	{
	  avga = (avg[0] + avg[1] + avg[2]) / 3;
	  expr = (expr * avga) / avg[0];
	  expg = (expg * avga) / avg[1];
	  expb = (expb * avga) / avg[2];

	  /* keep exposure time in a working window */
	  avge = (expr + expg + expb) / 3;
	  if (avge > 0x2000)
	    {
	      expr = (expr * 0x2000) / avge;
	      expg = (expg * 0x2000) / avge;
	      expb = (expb * 0x2000) / avge;
	    }
	  if (avge < 0x400)
	    {
	      expr = (expr * 0x400) / avge;
	      expg = (expg * 0x400) / avge;
	      expb = (expb * 0x400) / avge;
	    }
	}

      turn++;

    }
  while (!acceptable && turn < 100);

  DBG(DBG_info,"%s: acceptable exposure: 0x%04x,0x%04x,0x%04x\n", __func__, expr, expg, expb);
    // BUG: we don't store the result of the last iteration to the sensor
    return calib_sensor.exposure;
}

/**
 * average dark pixels of a scan
 */
static int dark_average(std::uint8_t * data, unsigned int pixels, unsigned int lines,
                        unsigned int channels, unsigned int black)
{
  unsigned int i, j, k, average, count;
  unsigned int avg[3];
    std::uint8_t val;

  /* computes average value on black margin */
  for (k = 0; k < channels; k++)
    {
      avg[k] = 0;
      count = 0;
      for (i = 0; i < lines; i++)
	{
	  for (j = 0; j < black; j++)
	    {
	      val = data[i * channels * pixels + j + k];
	      avg[k] += val;
	      count++;
	    }
	}
      if (count)
	avg[k] /= count;
      DBG(DBG_info, "%s: avg[%d] = %d\n", __func__, k, avg[k]);
    }
  average = 0;
  for (i = 0; i < channels; i++)
    average += avg[i];
  average /= channels;
  DBG(DBG_info, "%s: average = %d\n", __func__, average);
  return average;
}


/** @brief calibration for AD frontend devices
 * we do simple scan until all black_pixels are higher than 0,
 * raising offset at each turn.
 */
static void ad_fe_offset_calibration(Genesys_Device* dev, const Genesys_Sensor& sensor)
{
    DBG_HELPER(dbg);
    (void) sensor;

  unsigned int channels;
  int pass = 0;
    unsigned adr, min;
  unsigned int bottom, black_pixels;

  channels = 3;

    // FIXME: maybe reuse `sensor`
    const auto& calib_sensor = sanei_genesys_find_sensor(dev, sensor.full_resolution, 3,
                                                         ScanMethod::FLATBED);
    black_pixels = (calib_sensor.black_pixels * sensor.full_resolution) / calib_sensor.full_resolution;

    unsigned pixels = dev->model->x_size_calib_mm * sensor.full_resolution / MM_PER_INCH;
    unsigned lines = CALIBRATION_LINES;

    if (dev->model->is_cis) {
        lines = ((lines + 2) / 3) * 3;
    }

    ScanSession session;
    session.params.xres = sensor.full_resolution;
    session.params.yres = sensor.full_resolution;
    session.params.startx = 0;
    session.params.starty = 0;
    session.params.pixels = pixels;
    session.params.lines = lines;
    session.params.depth = 8;
    session.params.channels = 3;
    session.params.scan_method = dev->settings.scan_method;
    session.params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS;
    session.params.color_filter = ColorFilter::RED;
    session.params.contrast_adjustment = dev->settings.contrast;
    session.params.brightness_adjustment = dev->settings.brightness;
    session.params.flags = ScanFlag::DISABLE_SHADING;
    if (dev->settings.scan_method == ScanMethod::TRANSPARENCY) {
        session.params.flags |= ScanFlag::USE_XPA;
    }
    compute_session(dev, session, calib_sensor);

  /* scan first line of data with no gain */
  dev->frontend.set_gain(0, 0);
  dev->frontend.set_gain(1, 0);
  dev->frontend.set_gain(2, 0);

    std::vector<std::uint8_t> line;

  /* scan with no move */
  bottom = 1;
  do
    {
      pass++;
      dev->frontend.set_offset(0, bottom);
      dev->frontend.set_offset(1, bottom);
      dev->frontend.set_offset(2, bottom);

        dev->cmd_set->init_regs_for_scan_session(dev, calib_sensor, &dev->reg, session);
        simple_scan(dev, calib_sensor, session, false, line, "ad_fe_offset_calibration");

        if (is_testing_mode()) {
            return;
        }

        if (dbg_log_image_data()) {
            char title[30];
            std::snprintf(title, 30, "gl646_offset%03d.tiff", static_cast<int>(bottom));
            write_tiff_file(title, line.data(), 8, channels, pixels, lines);
        }

      min = 0;
        for (unsigned y = 0; y < lines; y++) {
            for (unsigned x = 0; x < black_pixels; x++) {
                adr = (x + y * pixels) * channels;
	      if (line[adr] > min)
		min = line[adr];
	      if (line[adr + 1] > min)
		min = line[adr + 1];
	      if (line[adr + 2] > min)
		min = line[adr + 2];
	    }
	}

      DBG(DBG_info, "%s: pass=%d, min=%d\n", __func__, pass, min);
      bottom++;
    }
  while (pass < 128 && min == 0);
  if (pass == 128)
    {
        throw SaneException(SANE_STATUS_INVAL, "failed to find correct offset");
    }

  DBG(DBG_info, "%s: offset=(%d,%d,%d)\n", __func__,
      dev->frontend.get_offset(0),
      dev->frontend.get_offset(1),
      dev->frontend.get_offset(2));
}

/**
 * This function does the offset calibration by scanning one line of the calibration
 * area below scanner's top. There is a black margin and the remaining is white.
 * genesys_search_start() must have been called so that the offsets and margins
 * are already known.
 * @param dev scanner's device
*/
void CommandSetGl646::offset_calibration(Genesys_Device* dev, const Genesys_Sensor& sensor,
                                         Genesys_Register_Set& regs) const
{
    DBG_HELPER(dbg);
    (void) regs;

  int pass = 0, avg;
  int topavg, bottomavg;
  int top, bottom, black_pixels;

    if (dev->model->adc_id == AdcId::AD_XP200) {
        ad_fe_offset_calibration(dev, sensor);
        return;
    }

  /* setup for a RGB scan, one full sensor's width line */
  /* resolution is the one from the final scan          */
    unsigned resolution = dev->settings.xres;
    unsigned channels = 3;

    const auto& calib_sensor = sanei_genesys_find_sensor(dev, resolution, channels,
                                                         ScanMethod::FLATBED);
    black_pixels = (calib_sensor.black_pixels * resolution) / calib_sensor.full_resolution;

    unsigned pixels = dev->model->x_size_calib_mm * resolution / MM_PER_INCH;
    unsigned lines = CALIBRATION_LINES;
    if (dev->model->is_cis) {
        lines = ((lines + 2) / 3) * 3;
    }

    ScanSession session;
    session.params.xres = resolution;
    session.params.yres = resolution;
    session.params.startx = 0;
    session.params.starty = 0;
    session.params.pixels = pixels;
    session.params.lines = lines;
    session.params.depth = 8;
    session.params.channels = channels;
    session.params.scan_method = dev->settings.scan_method;
    session.params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS;
    session.params.color_filter = ColorFilter::RED;
    session.params.contrast_adjustment = dev->settings.contrast;
    session.params.brightness_adjustment = dev->settings.brightness;
    session.params.flags = ScanFlag::DISABLE_SHADING;
    if (dev->settings.scan_method == ScanMethod::TRANSPARENCY) {
        session.params.flags |= ScanFlag::USE_XPA;
    }
    compute_session(dev, session, sensor);

  /* scan first line of data with no gain, but with offset from
   * last calibration */
  dev->frontend.set_gain(0, 0);
  dev->frontend.set_gain(1, 0);
  dev->frontend.set_gain(2, 0);

  /* scan with no move */
  bottom = 90;
  dev->frontend.set_offset(0, bottom);
  dev->frontend.set_offset(1, bottom);
  dev->frontend.set_offset(2, bottom);

    std::vector<std::uint8_t> first_line, second_line;

    dev->cmd_set->init_regs_for_scan_session(dev, sensor, &dev->reg, session);
    simple_scan(dev, calib_sensor, session, false, first_line, "offset_first_line");

    if (dbg_log_image_data()) {
        char title[30];
        std::snprintf(title, 30, "gl646_offset%03d.tiff", bottom);
        write_tiff_file(title, first_line.data(), 8, channels, pixels, lines);
    }
    bottomavg = dark_average(first_line.data(), pixels, lines, channels, black_pixels);
    DBG(DBG_info, "%s: bottom avg=%d\n", __func__, bottomavg);

  /* now top value */
  top = 231;
  dev->frontend.set_offset(0, top);
  dev->frontend.set_offset(1, top);
  dev->frontend.set_offset(2, top);
    dev->cmd_set->init_regs_for_scan_session(dev, calib_sensor, &dev->reg, session);
    simple_scan(dev, calib_sensor, session, false, second_line, "offset_second_line");

    if (dbg_log_image_data()) {
        char title[30];
        std::snprintf(title, 30, "gl646_offset%03d.tiff", top);
        write_tiff_file(title, second_line.data(), 8, channels, pixels, lines);
    }
    topavg = dark_average(second_line.data(), pixels, lines, channels, black_pixels);
    DBG(DBG_info, "%s: top avg=%d\n", __func__, topavg);

    if (is_testing_mode()) {
        return;
    }

  /* loop until acceptable level */
  while ((pass < 32) && (top - bottom > 1))
    {
      pass++;

      /* settings for new scan */
      dev->frontend.set_offset(0, (top + bottom) / 2);
      dev->frontend.set_offset(1, (top + bottom) / 2);
      dev->frontend.set_offset(2, (top + bottom) / 2);

        // scan with no move
        dev->cmd_set->init_regs_for_scan_session(dev, calib_sensor, &dev->reg, session);
        simple_scan(dev, calib_sensor, session, false, second_line,
                    "offset_calibration_i");

        if (dbg_log_image_data()) {
            char title[30];
            std::snprintf(title, 30, "gl646_offset%03d.tiff", dev->frontend.get_offset(1));
            write_tiff_file(title, second_line.data(), 8, channels, pixels, lines);
        }

        avg = dark_average(second_line.data(), pixels, lines, channels, black_pixels);
      DBG(DBG_info, "%s: avg=%d offset=%d\n", __func__, avg, dev->frontend.get_offset(1));

      /* compute new boundaries */
      if (topavg == avg)
	{
	  topavg = avg;
          top = dev->frontend.get_offset(1);
	}
      else
	{
	  bottomavg = avg;
          bottom = dev->frontend.get_offset(1);
	}
    }

  DBG(DBG_info, "%s: offset=(%d,%d,%d)\n", __func__,
      dev->frontend.get_offset(0),
      dev->frontend.get_offset(1),
      dev->frontend.get_offset(2));
}

/**
 * Alternative coarse gain calibration
 * this on uses the settings from offset_calibration. First scan moves so
 * we can go to calibration area for XPA.
 * @param dev device for scan
 * @param dpi resolutnio to calibrate at
 */
void CommandSetGl646::coarse_gain_calibration(Genesys_Device* dev, const Genesys_Sensor& sensor,
                                              Genesys_Register_Set& regs, int dpi) const
{
    DBG_HELPER(dbg);
    (void) dpi;
    (void) sensor;
    (void) regs;

  float average[3];
  char title[32];

  /* setup for a RGB scan, one full sensor's width line */
  /* resolution is the one from the final scan          */
    unsigned channels = 3;

    // BUG: the following comment is incorrect
    // we are searching a sensor resolution */
    const auto& calib_sensor = sanei_genesys_find_sensor(dev, dev->settings.xres, channels,
                                                         ScanMethod::FLATBED);

    unsigned pixels = 0;
    float start = 0;
    if (dev->settings.scan_method == ScanMethod::FLATBED) {
        pixels = dev->model->x_size_calib_mm * dev->settings.xres / MM_PER_INCH;
    } else {
        start = dev->model->x_offset_ta;
        pixels = static_cast<unsigned>(
                              (dev->model->x_size_ta * dev->settings.xres) / MM_PER_INCH);
    }

    unsigned lines = CALIBRATION_LINES;
    // round up to multiple of 3 in case of CIS scanner
    if (dev->model->is_cis) {
        lines = ((lines + 2) / 3) * 3;
    }

    start = static_cast<float>((start * dev->settings.xres) / MM_PER_INCH);

    ScanSession session;
    session.params.xres = dev->settings.xres;
    session.params.yres = dev->settings.xres;
    session.params.startx = static_cast<unsigned>(start);
    session.params.starty = 0;
    session.params.pixels = pixels;
    session.params.lines = lines;
    session.params.depth = 8;
    session.params.channels = channels;
    session.params.scan_method = dev->settings.scan_method;
    session.params.scan_mode = ScanColorMode::COLOR_SINGLE_PASS;
    session.params.color_filter = ColorFilter::RED;
    session.params.contrast_adjustment = dev->settings.contrast;
    session.params.brightness_adjustment = dev->settings.brightness;
    session.params.flags = ScanFlag::DISABLE_SHADING;
    if (dev->settings.scan_method == ScanMethod::TRANSPARENCY) {
        session.params.flags |= ScanFlag::USE_XPA;
    }
    compute_session(dev, session, calib_sensor);

  /* start gain value */
  dev->frontend.set_gain(0, 1);
  dev->frontend.set_gain(1, 1);
  dev->frontend.set_gain(2, 1);

    average[0] = 0;
    average[1] = 0;
    average[2] = 0;

    unsigned pass = 0;

    std::vector<std::uint8_t> line;

  /* loop until each channel raises to acceptable level */
    while (((average[0] < calib_sensor.gain_white_ref) ||
            (average[1] < calib_sensor.gain_white_ref) ||
            (average[2] < calib_sensor.gain_white_ref)) && (pass < 30))
    {
        // scan with no move
        dev->cmd_set->init_regs_for_scan_session(dev, calib_sensor, &dev->reg, session);
        simple_scan(dev, calib_sensor, session, false, line, "coarse_gain_calibration");

        if (dbg_log_image_data()) {
            std::sprintf(title, "gl646_gain%02d.tiff", pass);
            write_tiff_file(title, line.data(), 8, channels, pixels, lines);
        }
        pass++;

        // average high level for each channel and compute gain to reach the target code
        // we only use the central half of the CCD data
        for (unsigned k = 0; k < channels; k++) {

            // we find the maximum white value, so we can deduce a threshold
            // to average white values
            unsigned maximum = 0;
            for (unsigned i = 0; i < lines; i++) {
                for (unsigned j = 0; j < pixels; j++) {
                    unsigned val = line[i * channels * pixels + j + k];
                    maximum = std::max(maximum, val);
                }
            }

            maximum = static_cast<int>(maximum * 0.9);

            // computes white average
            average[k] = 0;
            unsigned count = 0;
            for (unsigned i = 0; i < lines; i++) {
                for (unsigned j = 0; j < pixels; j++) {
                    // averaging only white points allow us not to care about dark margins
                    unsigned val = line[i * channels * pixels + j + k];
                    if (val > maximum) {
                        average[k] += val;
                        count++;
                    }
                }
            }
            average[k] = average[k] / count;

            // adjusts gain for the channel
            if (average[k] < calib_sensor.gain_white_ref) {
                dev->frontend.set_gain(k, dev->frontend.get_gain(k) + 1);
            }

            DBG(DBG_info, "%s: channel %d, average = %.2f, gain = %d\n", __func__, k, average[k],
                dev->frontend.get_gain(k));
        }
    }

    DBG(DBG_info, "%s: gains=(%d,%d,%d)\n", __func__,
        dev->frontend.get_gain(0),
        dev->frontend.get_gain(1),
        dev->frontend.get_gain(2));
}

/**
 * sets up the scanner's register for warming up. We scan 2 lines without moving.
 *
 */
void CommandSetGl646::init_regs_for_warmup(Genesys_Device* dev, const Genesys_Sensor& sensor,
                                           Genesys_Register_Set* local_reg) const
{
    DBG_HELPER(dbg);
    (void) sensor;

  dev->frontend = dev->frontend_initial;

    unsigned resolution = 300;
    const auto& local_sensor = sanei_genesys_find_sensor(dev, resolution, 1,
                                                         dev->settings.scan_method);

    // set up for a full width 2 lines gray scan without moving
    unsigned pixels = dev->model->x_size_calib_mm * resolution / MM_PER_INCH;

    ScanSession session;
    session.params.xres = resolution;
    session.params.yres = resolution;
    session.params.startx = 0;
    session.params.starty = 0;
    session.params.pixels = pixels;
    session.params.lines = 2;
    session.params.depth = dev->model->bpp_gray_values.front();
    session.params.channels = 1;
    session.params.scan_method = dev->settings.scan_method;
    session.params.scan_mode = ScanColorMode::GRAY;
    session.params.color_filter =  ColorFilter::RED;
    session.params.contrast_adjustment = 0;
    session.params.brightness_adjustment = 0;
    session.params.flags = ScanFlag::DISABLE_SHADING |
                           ScanFlag::DISABLE_GAMMA;
    if (dev->settings.scan_method == ScanMethod::TRANSPARENCY) {
        session.params.flags |= ScanFlag::USE_XPA;
    }
    compute_session(dev, session, local_sensor);

    dev->cmd_set->init_regs_for_scan_session(dev, local_sensor, &dev->reg, session);

  /* we are not going to move, so clear these bits */
    dev->reg.find_reg(0x02).value &= ~REG_0x02_FASTFED;

  /* copy to local_reg */
  *local_reg = dev->reg;

  /* turn off motor during this scan */
  sanei_genesys_set_motor_power(*local_reg, false);

    // now registers are ok, write them to scanner
    gl646_set_fe(dev, local_sensor, AFE_SET, session.params.xres);
}

/* *
 * initialize ASIC : registers, motor tables, and gamma tables
 * then ensure scanner's head is at home
 * @param dev device description of the scanner to initialize
 */
void CommandSetGl646::init(Genesys_Device* dev) const
{
    DBG_INIT();
    DBG_HELPER(dbg);

    std::uint8_t val = 0;
    std::uint32_t addr = 0xdead;
  size_t len;

    // to detect real power up condition, we write to REG_0x41 with pwrbit set, then read it back.
    // When scanner is cold (just replugged) PWRBIT will be set in the returned value
    auto status = scanner_read_status(*dev);
    if (status.is_replugged) {
      DBG(DBG_info, "%s: device is cold\n", __func__);
    } else {
      DBG(DBG_info, "%s: device is hot\n", __func__);
    }

  const auto& sensor = sanei_genesys_find_sensor_any(dev);

  /* if scanning session hasn't been initialized, set it up */
  if (!dev->already_initialized)
    {
      dev->dark_average_data.clear();
      dev->white_average_data.clear();

      dev->settings.color_filter = ColorFilter::GREEN;

      /* Set default values for registers */
      gl646_init_regs (dev);

        // Init shading data
        sanei_genesys_init_shading_data(dev, sensor,
                                        dev->model->x_size_calib_mm * sensor.full_resolution /
                                            MM_PER_INCH);

        dev->initial_regs = dev->reg;
    }

    // execute physical unit init only if cold
    if (status.is_replugged)
    {
      DBG(DBG_info, "%s: device is cold\n", __func__);

        val = 0x04;
        dev->interface->get_usb_device().control_msg(REQUEST_TYPE_OUT, REQUEST_REGISTER,
                                                     VALUE_INIT, INDEX, 1, &val);

        // ASIC reset
        dev->interface->write_register(0x0e, 0x00);
        dev->interface->sleep_ms(100);

        // Write initial registers
        dev->interface->write_registers(dev->reg);

        // send gamma tables if needed
        dev->cmd_set->send_gamma_table(dev, sensor);

        // Set powersaving(default = 15 minutes)
        dev->cmd_set->set_powersaving(dev, 15);
    }

    // Set analog frontend
    gl646_set_fe(dev, sensor, AFE_INIT, 0);

  /* GPO enabling for XP200 */
    if (dev->model->sensor_id == SensorId::CIS_XP200) {
        dev->interface->write_register(0x68, dev->gpo.regs.get_value(0x68));
        dev->interface->write_register(0x69, dev->gpo.regs.get_value(0x69));

        // enable GPIO
        gl646_gpio_output_enable(dev->interface->get_usb_device(), 6);

        // writes 0 to GPIO
        gl646_gpio_write(dev->interface->get_usb_device(), 0);

        // clear GPIO enable
        gl646_gpio_output_enable(dev->interface->get_usb_device(), 0);

        dev->interface->write_register(0x66, 0x10);
        dev->interface->write_register(0x66, 0x00);
        dev->interface->write_register(0x66, 0x10);
    }

  /* MD6471/G2410 and XP200 read/write data from an undocumented memory area which
   * is after the second slope table */
    if (dev->model->gpio_id != GpioId::HP3670 &&
        dev->model->gpio_id != GpioId::HP2400)
    {
      switch (sensor.full_resolution)
	{
	case 600:
	  addr = 0x08200;
	  break;
	case 1200:
	  addr = 0x10200;
	  break;
	case 2400:
	  addr = 0x1fa00;
	  break;
	}
    sanei_genesys_set_buffer_address(dev, addr);

      sanei_usb_set_timeout (2 * 1000);
      len = 6;
        // for some reason, read fails here for MD6471, HP2300 and XP200 one time out of
        // 2 scanimage launches
        try {
            dev->interface->bulk_read_data(0x45, dev->control, len);
        } catch (...) {
            dev->interface->bulk_read_data(0x45, dev->control, len);
        }
      sanei_usb_set_timeout (30 * 1000);
    }
  else
    /* HP2400 and HP3670 case */
    {
      dev->control[0] = 0x00;
      dev->control[1] = 0x00;
      dev->control[2] = 0x01;
      dev->control[3] = 0x00;
      dev->control[4] = 0x00;
      dev->control[5] = 0x00;
    }

  /* ensure head is correctly parked, and check lock */
    if (!dev->model->is_sheetfed) {
        move_back_home(dev, true);
    }

  /* here session and device are initialized */
    dev->already_initialized = true;
}

static void simple_scan(Genesys_Device* dev, const Genesys_Sensor& sensor,
                        const ScanSession& session, bool move,
                        std::vector<std::uint8_t>& data, const char* scan_identifier)
{
    unsigned lines = session.output_line_count;
    if (!dev->model->is_cis) {
        lines++;
    }

    std::size_t size = lines * session.params.pixels;
    unsigned bpp = session.params.depth == 16 ? 2 : 1;

    size *= bpp * session.params.channels;
  data.clear();
  data.resize(size);

    // initialize frontend
    gl646_set_fe(dev, sensor, AFE_SET, session.params.xres);

    // no watch dog for simple scan
    dev->reg.find_reg(0x01).value &= ~REG_0x01_DOGENB;

  /* one table movement for simple scan */
    dev->reg.find_reg(0x02).value &= ~REG_0x02_FASTFED;

    if (!move) {
        sanei_genesys_set_motor_power(dev->reg, false);
    }

  /* no automatic go home when using XPA */
    if (session.params.scan_method == ScanMethod::TRANSPARENCY) {
        dev->reg.find_reg(0x02).value &= ~REG_0x02_AGOHOME;
    }

    // write scan registers
    dev->interface->write_registers(dev->reg);

    // starts scan
    dev->cmd_set->begin_scan(dev, sensor, &dev->reg, move);

    if (is_testing_mode()) {
        dev->interface->test_checkpoint(scan_identifier);
        return;
    }

    wait_until_buffer_non_empty(dev, true);

    // now we're on target, we can read data
    sanei_genesys_read_data_from_scanner(dev, data.data(), size);

  /* in case of CIS scanner, we must reorder data */
    if (dev->model->is_cis && session.params.scan_mode == ScanColorMode::COLOR_SINGLE_PASS) {
        auto pixels_count = session.params.pixels;

        std::vector<std::uint8_t> buffer(pixels_count * 3 * bpp);

        if (bpp == 1) {
            for (unsigned y = 0; y < lines; y++) {
                // reorder line
                for (unsigned x = 0; x < pixels_count; x++) {
                    buffer[x * 3] = data[y * pixels_count * 3 + x];
                    buffer[x * 3 + 1] = data[y * pixels_count * 3 + pixels_count + x];
                    buffer[x * 3 + 2] = data[y * pixels_count * 3 + 2 * pixels_count + x];
                }
                // copy line back
                std::memcpy(data.data() + pixels_count * 3 * y, buffer.data(), pixels_count * 3);
            }
        } else {
            for (unsigned y = 0; y < lines; y++) {
                // reorder line
                auto pixels_count = session.params.pixels;
                for (unsigned x = 0; x < pixels_count; x++) {
                    buffer[x * 6] = data[y * pixels_count * 6 + x * 2];
                    buffer[x * 6 + 1] = data[y * pixels_count * 6 + x * 2 + 1];
                    buffer[x * 6 + 2] = data[y * pixels_count * 6 + 2 * pixels_count + x * 2];
                    buffer[x * 6 + 3] = data[y * pixels_count * 6 + 2 * pixels_count + x * 2 + 1];
                    buffer[x * 6 + 4] = data[y * pixels_count * 6 + 4 * pixels_count + x * 2];
                    buffer[x * 6 + 5] = data[y * pixels_count * 6 + 4 * pixels_count + x * 2 + 1];
                }
                // copy line back
                std::memcpy(data.data() + pixels_count * 6 * y, buffer.data(),pixels_count * 6);
            }
        }
    }

    // end scan , waiting the motor to stop if needed (if moving), but without ejecting doc
    end_scan_impl(dev, &dev->reg, true, false);
}

/**
 * update the status of the required sensor in the scanner session
 * the button fields are used to make events 'sticky'
 */
void CommandSetGl646::update_hardware_sensors(Genesys_Scanner* session) const
{
    DBG_HELPER(dbg);
  Genesys_Device *dev = session->dev;
    std::uint8_t value;

    // do what is needed to get a new set of events, but try to not loose any of them.
    gl646_gpio_read(dev->interface->get_usb_device(), &value);
    DBG(DBG_io, "%s: GPIO=0x%02x\n", __func__, value);

    // scan button
    if (dev->model->buttons & GENESYS_HAS_SCAN_SW) {
        switch (dev->model->gpio_id) {
        case GpioId::XP200:
            session->buttons[BUTTON_SCAN_SW].write((value & 0x02) != 0);
            break;
        case GpioId::MD_5345:
            session->buttons[BUTTON_SCAN_SW].write(value == 0x16);
            break;
        case GpioId::HP2300:
            session->buttons[BUTTON_SCAN_SW].write(value == 0x6c);
            break;
        case GpioId::HP3670:
        case GpioId::HP2400:
            session->buttons[BUTTON_SCAN_SW].write((value & 0x20) == 0);
            break;
        default:
                throw SaneException(SANE_STATUS_UNSUPPORTED, "unknown gpo type");
	}
    }

    // email button
    if (dev->model->buttons & GENESYS_HAS_EMAIL_SW) {
        switch (dev->model->gpio_id) {
        case GpioId::MD_5345:
            session->buttons[BUTTON_EMAIL_SW].write(value == 0x12);
            break;
        case GpioId::HP3670:
        case GpioId::HP2400:
            session->buttons[BUTTON_EMAIL_SW].write((value & 0x08) == 0);
            break;
        default:
                throw SaneException(SANE_STATUS_UNSUPPORTED, "unknown gpo type");
    }
    }

    // copy button
    if (dev->model->buttons & GENESYS_HAS_COPY_SW) {
        switch (dev->model->gpio_id) {
        case GpioId::MD_5345:
            session->buttons[BUTTON_COPY_SW].write(value == 0x11);
            break;
        case GpioId::HP2300:
            session->buttons[BUTTON_COPY_SW].write(value == 0x5c);
            break;
        case GpioId::HP3670:
        case GpioId::HP2400:
            session->buttons[BUTTON_COPY_SW].write((value & 0x10) == 0);
            break;
        default:
                throw SaneException(SANE_STATUS_UNSUPPORTED, "unknown gpo type");
    }
    }

    // power button
    if (dev->model->buttons & GENESYS_HAS_POWER_SW) {
        switch (dev->model->gpio_id) {
        case GpioId::MD_5345:
            session->buttons[BUTTON_POWER_SW].write(value == 0x14);
            break;
        default:
                throw SaneException(SANE_STATUS_UNSUPPORTED, "unknown gpo type");
    }
    }

    // ocr button
    if (dev->model->buttons & GENESYS_HAS_OCR_SW) {
        switch (dev->model->gpio_id) {
    case GpioId::MD_5345:
            session->buttons[BUTTON_OCR_SW].write(value == 0x13);
            break;
	default:
                throw SaneException(SANE_STATUS_UNSUPPORTED, "unknown gpo type");
    }
    }

    // document detection
    if (dev->model->buttons & GENESYS_HAS_PAGE_LOADED_SW) {
        switch (dev->model->gpio_id) {
        case GpioId::XP200:
            session->buttons[BUTTON_PAGE_LOADED_SW].write((value & 0x04) != 0);
            break;
        default:
                throw SaneException(SANE_STATUS_UNSUPPORTED, "unknown gpo type");
    }
    }

  /* XPA detection */
    if (dev->model->has_method(ScanMethod::TRANSPARENCY)) {
        switch (dev->model->gpio_id) {
            case GpioId::HP3670:
            case GpioId::HP2400:
	  /* test if XPA is plugged-in */
            if ((value & 0x40) == 0) {
                session->opt[OPT_SOURCE].cap &= ~SANE_CAP_INACTIVE;
            } else {
                session->opt[OPT_SOURCE].cap |= SANE_CAP_INACTIVE;
            }
      break;
            default:
                throw SaneException(SANE_STATUS_UNSUPPORTED, "unknown gpo type");
    }
    }
}

void CommandSetGl646::update_home_sensor_gpio(Genesys_Device& dev) const
{
    DBG_HELPER(dbg);
    (void) dev;
}

static void write_control(Genesys_Device* dev, const Genesys_Sensor& sensor, int resolution)
{
    DBG_HELPER(dbg);
    std::uint8_t control[4];
    std::uint32_t addr = 0xdead;

  /* 2300 does not write to 'control' */
    if (dev->model->motor_id == MotorId::HP2300) {
        return;
    }

  /* MD6471/G2410/HP2300 and XP200 read/write data from an undocumented memory area which
   * is after the second slope table */
  switch (sensor.full_resolution)
    {
    case 600:
      addr = 0x08200;
      break;
    case 1200:
      addr = 0x10200;
      break;
    case 2400:
      addr = 0x1fa00;
      break;
    default:
        throw SaneException("failed to compute control address");
    }

  /* XP200 sets dpi, what other scanner put is unknown yet */
  switch (dev->model->motor_id)
    {
        case MotorId::XP200:
      /* we put scan's dpi, not motor one */
            control[0] = resolution & 0xff;
            control[1] = (resolution >> 8) & 0xff;
      control[2] = dev->control[4];
      control[3] = dev->control[5];
      break;
        case MotorId::HP3670:
        case MotorId::HP2400:
        case MotorId::MD_5345:
        default:
      control[0] = dev->control[2];
      control[1] = dev->control[3];
      control[2] = dev->control[4];
      control[3] = dev->control[5];
      break;
    }

    dev->interface->write_buffer(0x3c, addr, control, 4);
}

void CommandSetGl646::wait_for_motor_stop(Genesys_Device* dev) const
{
    (void) dev;
}

void CommandSetGl646::send_shading_data(Genesys_Device* dev, const Genesys_Sensor& sensor,
                                        std::uint8_t* data, int size) const
{
    (void) dev;
    (void) sensor;
    (void) data;
    (void) size;
    throw SaneException("not implemented");
}

ScanSession CommandSetGl646::calculate_scan_session(const Genesys_Device* dev,
                                                    const Genesys_Sensor& sensor,
                                                    const Genesys_Settings& settings) const
{
    // compute distance to move
    float move = 0;
    if (!dev->model->is_sheetfed) {
        move = dev->model->y_offset;
        // add tl_y to base movement
    }
    move += settings.tl_y;

    if (move < 0) {
        DBG(DBG_error, "%s: overriding negative move value %f\n", __func__, move);
        move = 0;
    }

    move = static_cast<float>((move * dev->motor.base_ydpi) / MM_PER_INCH);
    float start = settings.tl_x;
    if (settings.scan_method == ScanMethod::FLATBED) {
        start += dev->model->x_offset;
    } else {
        start += dev->model->x_offset_ta;
    }
    start = static_cast<float>((start * settings.xres) / MM_PER_INCH);

    ScanSession session;
    session.params.xres = settings.xres;
    session.params.yres = settings.yres;
    session.params.startx = static_cast<unsigned>(start);
    session.params.starty = static_cast<unsigned>(move);
    session.params.pixels = settings.pixels;
    session.params.requested_pixels = settings.requested_pixels;
    session.params.lines = settings.lines;
    session.params.depth = settings.depth;
    session.params.channels = settings.get_channels();
    session.params.scan_method = dev->settings.scan_method;
    session.params.scan_mode = settings.scan_mode;
    session.params.color_filter = settings.color_filter;
    session.params.contrast_adjustment = settings.contrast;
    session.params.brightness_adjustment = settings.brightness;
    session.params.flags = ScanFlag::AUTO_GO_HOME;
    if (settings.scan_method == ScanMethod::TRANSPARENCY) {
        session.params.flags |= ScanFlag::USE_XPA;
    }
    compute_session(dev, session, sensor);

    return session;
}

void CommandSetGl646::asic_boot(Genesys_Device *dev, bool cold) const
{
    (void) dev;
    (void) cold;
    throw SaneException("not implemented");
}

} // namespace gl646
} // namespace genesys