.. _ensemble:

================
Ensemble methods
================

.. currentmodule:: sklearn.ensemble

The goal of **ensemble methods** is to combine the predictions of several
base estimators built with a given learning algorithm in order to improve
generalizability / robustness over a single estimator.

Two families of ensemble methods are usually distinguished:

- In **averaging methods**, the driving principle is to build several
  estimators independently and then to average their predictions. On average,
  the combined estimator is usually better than any of the single base
  estimator because its variance is reduced.

  **Examples:** :ref:`Bagging methods <bagging>`, :ref:`Forests of randomized trees <forest>`, ...

- By contrast, in **boosting methods**, base estimators are built sequentially
  and one tries to reduce the bias of the combined estimator. The motivation is
  to combine several weak models to produce a powerful ensemble.

  **Examples:** :ref:`AdaBoost <adaboost>`, :ref:`Gradient Tree Boosting <gradient_boosting>`, ...


.. _bagging:

Bagging meta-estimator
======================

In ensemble algorithms, bagging methods form a class of algorithms which build
several instances of a black-box estimator on random subsets of the original
training set and then aggregate their individual predictions to form a final
prediction. These methods are used as a way to reduce the variance of a base
estimator (e.g., a decision tree), by introducing randomization into its
construction procedure and then making an ensemble out of it. In many cases,
bagging methods constitute a very simple way to improve with respect to a
single model, without making it necessary to adapt the underlying base
algorithm. As they provide a way to reduce overfitting, bagging methods work
best with strong and complex models (e.g., fully developed decision trees), in
contrast with boosting methods which usually work best with weak models (e.g.,
shallow decision trees).

Bagging methods come in many flavours but mostly differ from each other by the
way they draw random subsets of the training set:

  * When random subsets of the dataset are drawn as random subsets of the
    samples, then this algorithm is known as Pasting [B1999]_.

  * When samples are drawn with replacement, then the method is known as
    Bagging [B1996]_.

  * When random subsets of the dataset are drawn as random subsets of
    the features, then the method is known as Random Subspaces [H1998]_.

  * Finally, when base estimators are built on subsets of both samples and
    features, then the method is known as Random Patches [LG2012]_.

In scikit-learn, bagging methods are offered as a unified
:class:`BaggingClassifier` meta-estimator  (resp. :class:`BaggingRegressor`),
taking as input a user-specified base estimator along with parameters
specifying the strategy to draw random subsets. In particular, ``max_samples``
and ``max_features`` control the size of the subsets (in terms of samples and
features), while ``bootstrap`` and ``bootstrap_features`` control whether
samples and features are drawn with or without replacement. When using a subset
of the available samples the generalization accuracy can be estimated with the
out-of-bag samples by setting ``oob_score=True``. As an example, the
snippet below illustrates how to instantiate a bagging ensemble of
:class:`KNeighborsClassifier` base estimators, each built on random subsets of
50% of the samples and 50% of the features.

    >>> from sklearn.ensemble import BaggingClassifier
    >>> from sklearn.neighbors import KNeighborsClassifier
    >>> bagging = BaggingClassifier(KNeighborsClassifier(),
    ...                             max_samples=0.5, max_features=0.5)

.. topic:: Examples:

 * :ref:`sphx_glr_auto_examples_ensemble_plot_bias_variance.py`

.. topic:: References

  .. [B1999] L. Breiman, "Pasting small votes for classification in large
         databases and on-line", Machine Learning, 36(1), 85-103, 1999.

  .. [B1996] L. Breiman, "Bagging predictors", Machine Learning, 24(2),
         123-140, 1996.

  .. [H1998] T. Ho, "The random subspace method for constructing decision
         forests", Pattern Analysis and Machine Intelligence, 20(8), 832-844,
         1998.

  .. [LG2012] G. Louppe and P. Geurts, "Ensembles on Random Patches",
         Machine Learning and Knowledge Discovery in Databases, 346-361, 2012.

.. _forest:

Forests of randomized trees
===========================

The :mod:`sklearn.ensemble` module includes two averaging algorithms based
on randomized :ref:`decision trees <tree>`: the RandomForest algorithm
and the Extra-Trees method. Both algorithms are perturb-and-combine
techniques [B1998]_ specifically designed for trees. This means a diverse
set of classifiers is created by introducing randomness in the classifier
construction.  The prediction of the ensemble is given as the averaged
prediction of the individual classifiers.

As other classifiers, forest classifiers have to be fitted with two
arrays: a sparse or dense array X of size ``[n_samples, n_features]`` holding the
training samples, and an array Y of size ``[n_samples]`` holding the
target values (class labels) for the training samples::

    >>> from sklearn.ensemble import RandomForestClassifier
    >>> X = [[0, 0], [1, 1]]
    >>> Y = [0, 1]
    >>> clf = RandomForestClassifier(n_estimators=10)
    >>> clf = clf.fit(X, Y)

Like :ref:`decision trees <tree>`, forests of trees also extend
to :ref:`multi-output problems <tree_multioutput>`  (if Y is an array of size
``[n_samples, n_outputs]``).

Random Forests
--------------

In random forests (see :class:`RandomForestClassifier` and
:class:`RandomForestRegressor` classes), each tree in the ensemble is
built from a sample drawn with replacement (i.e., a bootstrap sample)
from the training set. In addition, when splitting a node during the
construction of the tree, the split that is chosen is no longer the
best split among all features. Instead, the split that is picked is the
best split among a random subset of the features. As a result of this
randomness, the bias of the forest usually slightly increases (with
respect to the bias of a single non-random tree) but, due to averaging,
its variance also decreases, usually more than compensating for the
increase in bias, hence yielding an overall better model.

In contrast to the original publication [B2001]_, the scikit-learn
implementation combines classifiers by averaging their probabilistic
prediction, instead of letting each classifier vote for a single class.

Extremely Randomized Trees
--------------------------

In extremely randomized trees (see :class:`ExtraTreesClassifier`
and :class:`ExtraTreesRegressor` classes), randomness goes one step
further in the way splits are computed. As in random forests, a random
subset of candidate features is used, but instead of looking for the
most discriminative thresholds, thresholds are drawn at random for each
candidate feature and the best of these randomly-generated thresholds is
picked as the splitting rule. This usually allows to reduce the variance
of the model a bit more, at the expense of a slightly greater increase
in bias::

    >>> from sklearn.model_selection import cross_val_score
    >>> from sklearn.datasets import make_blobs
    >>> from sklearn.ensemble import RandomForestClassifier
    >>> from sklearn.ensemble import ExtraTreesClassifier
    >>> from sklearn.tree import DecisionTreeClassifier

    >>> X, y = make_blobs(n_samples=10000, n_features=10, centers=100,
    ...     random_state=0)

    >>> clf = DecisionTreeClassifier(max_depth=None, min_samples_split=2,
    ...     random_state=0)
    >>> scores = cross_val_score(clf, X, y)
    >>> scores.mean()                             # doctest: +ELLIPSIS
    0.97...

    >>> clf = RandomForestClassifier(n_estimators=10, max_depth=None,
    ...     min_samples_split=2, random_state=0)
    >>> scores = cross_val_score(clf, X, y)
    >>> scores.mean()                             # doctest: +ELLIPSIS
    0.999...

    >>> clf = ExtraTreesClassifier(n_estimators=10, max_depth=None,
    ...     min_samples_split=2, random_state=0)
    >>> scores = cross_val_score(clf, X, y)
    >>> scores.mean() > 0.999
    True

.. figure:: ../auto_examples/ensemble/images/sphx_glr_plot_forest_iris_001.png
    :target: ../auto_examples/ensemble/plot_forest_iris.html
    :align: center
    :scale: 75%

Parameters
----------

The main parameters to adjust when using these methods is ``n_estimators``
and ``max_features``. The former is the number of trees in the forest. The
larger the better, but also the longer it will take to compute. In
addition, note that results will stop getting significantly better
beyond a critical number of trees. The latter is the size of the random
subsets of features to consider when splitting a node. The lower the
greater the reduction of variance, but also the greater the increase in
bias. Empirical good default values are ``max_features=n_features``
for regression problems, and ``max_features=sqrt(n_features)`` for
classification tasks (where ``n_features`` is the number of features
in the data). Good results are often achieved when setting ``max_depth=None``
in combination with ``min_samples_split=1`` (i.e., when fully developing the
trees). Bear in mind though that these values are usually not optimal, and
might result in models that consume a lot of RAM. The best parameter values
should always be cross-validated. In addition, note that in random forests,
bootstrap samples are used by default (``bootstrap=True``)
while the default strategy for extra-trees is to use the whole dataset
(``bootstrap=False``).
When using bootstrap sampling the generalization accuracy can be estimated
on the left out or out-of-bag samples. This can be enabled by
setting ``oob_score=True``.

Parallelization
---------------

Finally, this module also features the parallel construction of the trees
and the parallel computation of the predictions through the ``n_jobs``
parameter. If ``n_jobs=k`` then computations are partitioned into
``k`` jobs, and run on ``k`` cores of the machine. If ``n_jobs=-1``
then all cores available on the machine are used. Note that because of
inter-process communication overhead, the speedup might not be linear
(i.e., using ``k`` jobs will unfortunately not be ``k`` times as
fast). Significant speedup can still be achieved though when building
a large number of trees, or when building a single tree requires a fair
amount of time (e.g., on large datasets).

.. topic:: Examples:

 * :ref:`sphx_glr_auto_examples_ensemble_plot_forest_iris.py`
 * :ref:`sphx_glr_auto_examples_ensemble_plot_forest_importances_faces.py`
 * :ref:`sphx_glr_auto_examples_plot_multioutput_face_completion.py`

.. topic:: References

 .. [B2001] L. Breiman, "Random Forests", Machine Learning, 45(1), 5-32, 2001.

 .. [B1998] L. Breiman, "Arcing Classifiers", Annals of Statistics 1998.

 .. [GEW2006] P. Geurts, D. Ernst., and L. Wehenkel, "Extremely randomized
   trees", Machine Learning, 63(1), 3-42, 2006.

.. _random_forest_feature_importance:

Feature importance evaluation
-----------------------------

The relative rank (i.e. depth) of a feature used as a decision node in a
tree can be used to assess the relative importance of that feature with
respect to the predictability of the target variable. Features used at
the top of the tree contribute to the final prediction decision of a 
larger fraction of the input samples. The **expected fraction of the 
samples** they contribute to can thus be used as an estimate of the
**relative importance of the features**.

By **averaging** those expected activity rates over several randomized
trees one can **reduce the variance** of such an estimate and use it
for feature selection.

The following example shows a color-coded representation of the relative
importances of each individual pixel for a face recognition task using
a :class:`ExtraTreesClassifier` model.

.. figure:: ../auto_examples/ensemble/images/sphx_glr_plot_forest_importances_faces_001.png
   :target: ../auto_examples/ensemble/plot_forest_importances_faces.html
   :align: center
   :scale: 75

In practice those estimates are stored as an attribute named
``feature_importances_`` on the fitted model. This is an array with shape
``(n_features,)`` whose values are positive and sum to 1.0. The higher
the value, the more important is the contribution of the matching feature
to the prediction function.

.. topic:: Examples:

 * :ref:`sphx_glr_auto_examples_ensemble_plot_forest_importances_faces.py`
 * :ref:`sphx_glr_auto_examples_ensemble_plot_forest_importances.py`

.. _random_trees_embedding:

Totally Random Trees Embedding
------------------------------

:class:`RandomTreesEmbedding` implements an unsupervised transformation of the
data.  Using a forest of completely random trees, :class:`RandomTreesEmbedding`
encodes the data by the indices of the leaves a data point ends up in.  This
index is then encoded in a one-of-K manner, leading to a high dimensional,
sparse binary coding.
This coding can be computed very efficiently and can then be used as a basis
for other learning tasks.
The size and sparsity of the code can be influenced by choosing the number of
trees and the maximum depth per tree. For each tree in the ensemble, the coding
contains one entry of one. The size of the coding is at most ``n_estimators * 2
** max_depth``, the maximum number of leaves in the forest.

As neighboring data points are more likely to lie within the same leaf of a tree,
the transformation performs an implicit, non-parametric density estimation.

.. topic:: Examples:

 * :ref:`sphx_glr_auto_examples_ensemble_plot_random_forest_embedding.py`

 * :ref:`sphx_glr_auto_examples_manifold_plot_lle_digits.py` compares non-linear
   dimensionality reduction techniques on handwritten digits.

 * :ref:`sphx_glr_auto_examples_ensemble_plot_feature_transformation.py` compares
   supervised and unsupervised tree based feature transformations.

.. seealso::

   :ref:`manifold` techniques can also be useful to derive non-linear
   representations of feature space, also these approaches focus also on
   dimensionality reduction.


.. _adaboost:

AdaBoost
========

The module :mod:`sklearn.ensemble` includes the popular boosting algorithm
AdaBoost, introduced in 1995 by Freund and Schapire [FS1995]_.

The core principle of AdaBoost is to fit a sequence of weak learners (i.e.,
models that are only slightly better than random guessing, such as small
decision trees) on repeatedly modified versions of the data. The predictions
from all of them are then combined through a weighted majority vote (or sum) to
produce the final prediction. The data modifications at each so-called boosting
iteration consist of applying weights :math:`w_1`, :math:`w_2`, ..., :math:`w_N`
to each of the training samples. Initially, those weights are all set to
:math:`w_i = 1/N`, so that the first step simply trains a weak learner on the
original data. For each successive iteration, the sample weights are
individually modified and the learning algorithm is reapplied to the reweighted
data. At a given step, those training examples that were incorrectly predicted
by the boosted model induced at the previous step have their weights increased,
whereas the weights are decreased for those that were predicted correctly. As
iterations proceed, examples that are difficult to predict receive
ever-increasing influence. Each subsequent weak learner is thereby forced to
concentrate on the examples that are missed by the previous ones in the sequence
[HTF]_.

.. figure:: ../auto_examples/ensemble/images/sphx_glr_plot_adaboost_hastie_10_2_001.png
   :target: ../auto_examples/ensemble/plot_adaboost_hastie_10_2.html
   :align: center
   :scale: 75

AdaBoost can be used both for classification and regression problems:

  - For multi-class classification, :class:`AdaBoostClassifier` implements
    AdaBoost-SAMME and AdaBoost-SAMME.R [ZZRH2009]_.

  - For regression, :class:`AdaBoostRegressor` implements AdaBoost.R2 [D1997]_.

Usage
-----

The following example shows how to fit an AdaBoost classifier with 100 weak
learners::

    >>> from sklearn.model_selection import cross_val_score
    >>> from sklearn.datasets import load_iris
    >>> from sklearn.ensemble import AdaBoostClassifier

    >>> iris = load_iris()
    >>> clf = AdaBoostClassifier(n_estimators=100)
    >>> scores = cross_val_score(clf, iris.data, iris.target)
    >>> scores.mean()                             # doctest: +ELLIPSIS
    0.9...

The number of weak learners is controlled by the parameter ``n_estimators``. The
``learning_rate`` parameter controls the contribution of the weak learners in
the final combination. By default, weak learners are decision stumps. Different
weak learners can be specified through the ``base_estimator`` parameter.
The main parameters to tune to obtain good results are ``n_estimators`` and
the complexity of the base estimators (e.g., its depth ``max_depth`` or
minimum required number of samples at a leaf ``min_samples_leaf`` in case of
decision trees).

.. topic:: Examples:

 * :ref:`sphx_glr_auto_examples_ensemble_plot_adaboost_hastie_10_2.py` compares the
   classification error of a decision stump, decision tree, and a boosted
   decision stump using AdaBoost-SAMME and AdaBoost-SAMME.R.

 * :ref:`sphx_glr_auto_examples_ensemble_plot_adaboost_multiclass.py` shows the performance
   of AdaBoost-SAMME and AdaBoost-SAMME.R on a multi-class problem.

 * :ref:`sphx_glr_auto_examples_ensemble_plot_adaboost_twoclass.py` shows the decision boundary
   and decision function values for a non-linearly separable two-class problem
   using AdaBoost-SAMME.

 * :ref:`sphx_glr_auto_examples_ensemble_plot_adaboost_regression.py` demonstrates regression
   with the AdaBoost.R2 algorithm.

.. topic:: References

 .. [FS1995] Y. Freund, and R. Schapire, "A Decision-Theoretic Generalization of
             On-Line Learning and an Application to Boosting", 1997.

 .. [ZZRH2009] J. Zhu, H. Zou, S. Rosset, T. Hastie. "Multi-class AdaBoost",
               2009.

 .. [D1997] H. Drucker. "Improving Regressors using Boosting Techniques", 1997.

 .. [HTF] T. Hastie, R. Tibshirani and J. Friedman, "Elements of
              Statistical Learning Ed. 2", Springer, 2009.


.. _gradient_boosting:

Gradient Tree Boosting
======================

`Gradient Tree Boosting <https://en.wikipedia.org/wiki/Gradient_boosting>`_
or Gradient Boosted Regression Trees (GBRT) is a generalization
of boosting to arbitrary
differentiable loss functions. GBRT is an accurate and effective
off-the-shelf procedure that can be used for both regression and
classification problems.  Gradient Tree Boosting models are used in a
variety of areas including Web search ranking and ecology.

The advantages of GBRT are:

  + Natural handling of data of mixed type (= heterogeneous features)

  + Predictive power

  + Robustness to outliers in output space (via robust loss functions)

The disadvantages of GBRT are:

  + Scalability, due to the sequential nature of boosting it can
    hardly be parallelized.

The module :mod:`sklearn.ensemble` provides methods
for both classification and regression via gradient boosted regression
trees.

Classification
---------------

:class:`GradientBoostingClassifier` supports both binary and multi-class
classification.
The following example shows how to fit a gradient boosting classifier
with 100 decision stumps as weak learners::

    >>> from sklearn.datasets import make_hastie_10_2
    >>> from sklearn.ensemble import GradientBoostingClassifier

    >>> X, y = make_hastie_10_2(random_state=0)
    >>> X_train, X_test = X[:2000], X[2000:]
    >>> y_train, y_test = y[:2000], y[2000:]

    >>> clf = GradientBoostingClassifier(n_estimators=100, learning_rate=1.0,
    ...     max_depth=1, random_state=0).fit(X_train, y_train)
    >>> clf.score(X_test, y_test)                 # doctest: +ELLIPSIS
    0.913...

The number of weak learners (i.e. regression trees) is controlled by the parameter ``n_estimators``; :ref:`The size of each tree <gradient_boosting_tree_size>` can be controlled either by setting the tree depth via ``max_depth`` or by setting the number of leaf nodes via ``max_leaf_nodes``. The ``learning_rate`` is a hyper-parameter in the range (0.0, 1.0] that controls overfitting via :ref:`shrinkage <gradient_boosting_shrinkage>` .

.. note::

   Classification with more than 2 classes requires the induction
   of ``n_classes`` regression trees at each iteration,
   thus, the total number of induced trees equals
   ``n_classes * n_estimators``. For datasets with a large number
   of classes we strongly recommend to use
   :class:`RandomForestClassifier` as an alternative to :class:`GradientBoostingClassifier` .

Regression
----------

:class:`GradientBoostingRegressor` supports a number of
:ref:`different loss functions <gradient_boosting_loss>`
for regression which can be specified via the argument
``loss``; the default loss function for regression is least squares (``'ls'``).

::

    >>> import numpy as np
    >>> from sklearn.metrics import mean_squared_error
    >>> from sklearn.datasets import make_friedman1
    >>> from sklearn.ensemble import GradientBoostingRegressor

    >>> X, y = make_friedman1(n_samples=1200, random_state=0, noise=1.0)
    >>> X_train, X_test = X[:200], X[200:]
    >>> y_train, y_test = y[:200], y[200:]
    >>> est = GradientBoostingRegressor(n_estimators=100, learning_rate=0.1,
    ...     max_depth=1, random_state=0, loss='ls').fit(X_train, y_train)
    >>> mean_squared_error(y_test, est.predict(X_test))    # doctest: +ELLIPSIS
    5.00...

The figure below shows the results of applying :class:`GradientBoostingRegressor`
with least squares loss and 500 base learners to the Boston house price dataset
(:func:`sklearn.datasets.load_boston`).
The plot on the left shows the train and test error at each iteration.
The train error at each iteration is stored in the
:attr:`~GradientBoostingRegressor.train_score_` attribute
of the gradient boosting model. The test error at each iterations can be obtained
via the :meth:`~GradientBoostingRegressor.staged_predict` method which returns a
generator that yields the predictions at each stage. Plots like these can be used
to determine the optimal number of trees (i.e. ``n_estimators``) by early stopping.
The plot on the right shows the feature importances which can be obtained via
the ``feature_importances_`` property.

.. figure:: ../auto_examples/ensemble/images/sphx_glr_plot_gradient_boosting_regression_001.png
   :target: ../auto_examples/ensemble/plot_gradient_boosting_regression.html
   :align: center
   :scale: 75

.. topic:: Examples:

 * :ref:`sphx_glr_auto_examples_ensemble_plot_gradient_boosting_regression.py`
 * :ref:`sphx_glr_auto_examples_ensemble_plot_gradient_boosting_oob.py`

.. _gradient_boosting_warm_start:

Fitting additional weak-learners
--------------------------------

Both :class:`GradientBoostingRegressor` and :class:`GradientBoostingClassifier`
support ``warm_start=True`` which allows you to add more estimators to an already
fitted model.

::

  >>> _ = est.set_params(n_estimators=200, warm_start=True)  # set warm_start and new nr of trees
  >>> _ = est.fit(X_train, y_train) # fit additional 100 trees to est
  >>> mean_squared_error(y_test, est.predict(X_test))    # doctest: +ELLIPSIS
  3.84...

.. _gradient_boosting_tree_size:

Controlling the tree size
-------------------------

The size of the regression tree base learners defines the level of variable
interactions that can be captured by the gradient boosting model. In general,
a tree of depth ``h`` can capture interactions of order ``h`` .
There are two ways in which the size of the individual regression trees can
be controlled.

If you specify ``max_depth=h`` then complete binary trees
of depth ``h`` will be grown. Such trees will have (at most) ``2**h`` leaf nodes
and ``2**h - 1`` split nodes.

Alternatively, you can control the tree size by specifying the number of
leaf nodes via the parameter ``max_leaf_nodes``. In this case,
trees will be grown using best-first search where nodes with the highest improvement
in impurity will be expanded first.
A tree with ``max_leaf_nodes=k`` has ``k - 1`` split nodes and thus can
model interactions of up to order ``max_leaf_nodes - 1`` .

We found that ``max_leaf_nodes=k`` gives comparable results to ``max_depth=k-1``
but is significantly faster to train at the expense of a slightly higher
training error.
The parameter ``max_leaf_nodes`` corresponds to the variable ``J`` in the
chapter on gradient boosting in [F2001]_ and is related to the parameter
``interaction.depth`` in R's gbm package where ``max_leaf_nodes == interaction.depth + 1`` .

Mathematical formulation
-------------------------

GBRT considers additive models of the following form:

  .. math::

    F(x) = \sum_{m=1}^{M} \gamma_m h_m(x)

where :math:`h_m(x)` are the basis functions which are usually called
*weak learners* in the context of boosting. Gradient Tree Boosting
uses :ref:`decision trees <tree>` of fixed size as weak
learners. Decision trees have a number of abilities that make them
valuable for boosting, namely the ability to handle data of mixed type
and the ability to model complex functions.

Similar to other boosting algorithms GBRT builds the additive model in
a forward stagewise fashion:

  .. math::

    F_m(x) = F_{m-1}(x) + \gamma_m h_m(x)

At each stage the decision tree :math:`h_m(x)` is chosen to
minimize the loss function :math:`L` given the current model
:math:`F_{m-1}` and its fit :math:`F_{m-1}(x_i)`

  .. math::

    F_m(x) = F_{m-1}(x) + \arg\min_{h} \sum_{i=1}^{n} L(y_i,
    F_{m-1}(x_i) - h(x))

The initial model :math:`F_{0}` is problem specific, for least-squares
regression one usually chooses the mean of the target values.

.. note:: The initial model can also be specified via the ``init``
          argument. The passed object has to implement ``fit`` and ``predict``.

Gradient Boosting attempts to solve this minimization problem
numerically via steepest descent: The steepest descent direction is
the negative gradient of the loss function evaluated at the current
model :math:`F_{m-1}` which can be calculated for any differentiable
loss function:

  .. math::

    F_m(x) = F_{m-1}(x) + \gamma_m \sum_{i=1}^{n} \nabla_F L(y_i,
    F_{m-1}(x_i))

Where the step length :math:`\gamma_m` is chosen using line search:

  .. math::

    \gamma_m = \arg\min_{\gamma} \sum_{i=1}^{n} L(y_i, F_{m-1}(x_i)
    - \gamma \frac{\partial L(y_i, F_{m-1}(x_i))}{\partial F_{m-1}(x_i)})

The algorithms for regression and classification
only differ in the concrete loss function used.

.. _gradient_boosting_loss:

Loss Functions
...............

The following loss functions are supported and can be specified using
the parameter ``loss``:

  * Regression

    * Least squares (``'ls'``): The natural choice for regression due
      to its superior computational properties. The initial model is
      given by the mean of the target values.
    * Least absolute deviation (``'lad'``): A robust loss function for
      regression. The initial model is given by the median of the
      target values.
    * Huber (``'huber'``): Another robust loss function that combines
      least squares and least absolute deviation; use ``alpha`` to
      control the sensitivity with regards to outliers (see [F2001]_ for
      more details).
    * Quantile (``'quantile'``): A loss function for quantile regression.
      Use ``0 < alpha < 1`` to specify the quantile. This loss function
      can be used to create prediction intervals
      (see :ref:`sphx_glr_auto_examples_ensemble_plot_gradient_boosting_quantile.py`).

  * Classification

    * Binomial deviance (``'deviance'``): The negative binomial
      log-likelihood loss function for binary classification (provides
      probability estimates).  The initial model is given by the
      log odds-ratio.
    * Multinomial deviance (``'deviance'``): The negative multinomial
      log-likelihood loss function for multi-class classification with
      ``n_classes`` mutually exclusive classes. It provides
      probability estimates.  The initial model is given by the
      prior probability of each class. At each iteration ``n_classes``
      regression trees have to be constructed which makes GBRT rather
      inefficient for data sets with a large number of classes.
    * Exponential loss (``'exponential'``): The same loss function
      as :class:`AdaBoostClassifier`. Less robust to mislabeled
      examples than ``'deviance'``; can only be used for binary
      classification.

Regularization
----------------

.. _gradient_boosting_shrinkage:

Shrinkage
..........

[F2001]_ proposed a simple regularization strategy that scales
the contribution of each weak learner by a factor :math:`\nu`:

.. math::

    F_m(x) = F_{m-1}(x) + \nu \gamma_m h_m(x)

The parameter :math:`\nu` is also called the **learning rate** because
it scales the step length the gradient descent procedure; it can
be set via the ``learning_rate`` parameter.

The parameter ``learning_rate`` strongly interacts with the parameter
``n_estimators``, the number of weak learners to fit. Smaller values
of ``learning_rate`` require larger numbers of weak learners to maintain
a constant training error. Empirical evidence suggests that small
values of ``learning_rate`` favor better test error. [HTF2009]_
recommend to set the learning rate to a small constant
(e.g. ``learning_rate <= 0.1``) and choose ``n_estimators`` by early
stopping. For a more detailed discussion of the interaction between
``learning_rate`` and ``n_estimators`` see [R2007]_.

Subsampling
............

[F1999]_ proposed stochastic gradient boosting, which combines gradient
boosting with bootstrap averaging (bagging). At each iteration
the base classifier is trained on a fraction ``subsample`` of
the available training data. The subsample is drawn without replacement.
A typical value of ``subsample`` is 0.5.

The figure below illustrates the effect of shrinkage and subsampling
on the goodness-of-fit of the model. We can clearly see that shrinkage
outperforms no-shrinkage. Subsampling with shrinkage can further increase
the accuracy of the model. Subsampling without shrinkage, on the other hand,
does poorly.

.. figure:: ../auto_examples/ensemble/images/sphx_glr_plot_gradient_boosting_regularization_001.png
   :target: ../auto_examples/ensemble/plot_gradient_boosting_regularization.html
   :align: center
   :scale: 75

Another strategy to reduce the variance is by subsampling the features
analogous to the random splits in :class:`RandomForestClassifier` .
The number of subsampled features can be controlled via the ``max_features``
parameter.

.. note:: Using a small ``max_features`` value can significantly decrease the runtime.

Stochastic gradient boosting allows to compute out-of-bag estimates of the
test deviance by computing the improvement in deviance on the examples that are
not included in the bootstrap sample (i.e. the out-of-bag examples).
The improvements are stored in the attribute
:attr:`~GradientBoostingRegressor.oob_improvement_`. ``oob_improvement_[i]`` holds
the improvement in terms of the loss on the OOB samples if you add the i-th stage
to the current predictions.
Out-of-bag estimates can be used for model selection, for example to determine
the optimal number of iterations. OOB estimates are usually very pessimistic thus
we recommend to use cross-validation instead and only use OOB if cross-validation
is too time consuming.

.. topic:: Examples:

 * :ref:`sphx_glr_auto_examples_ensemble_plot_gradient_boosting_regularization.py`
 * :ref:`sphx_glr_auto_examples_ensemble_plot_gradient_boosting_oob.py`
 * :ref:`sphx_glr_auto_examples_ensemble_plot_ensemble_oob.py`

Interpretation
--------------

Individual decision trees can be interpreted easily by simply
visualizing the tree structure. Gradient boosting models, however,
comprise hundreds of regression trees thus they cannot be easily
interpreted by visual inspection of the individual trees. Fortunately,
a number of techniques have been proposed to summarize and interpret
gradient boosting models.

Feature importance
..................

Often features do not contribute equally to predict the target
response; in many situations the majority of the features are in fact
irrelevant.
When interpreting a model, the first question usually is: what are
those important features and how do they contributing in predicting
the target response?

Individual decision trees intrinsically perform feature selection by selecting
appropriate split points. This information can be used to measure the
importance of each feature; the basic idea is: the more often a
feature is used in the split points of a tree the more important that
feature is. This notion of importance can be extended to decision tree
ensembles by simply averaging the feature importance of each tree (see
:ref:`random_forest_feature_importance` for more details).

The feature importance scores of a fit gradient boosting model can be
accessed via the ``feature_importances_`` property::

    >>> from sklearn.datasets import make_hastie_10_2
    >>> from sklearn.ensemble import GradientBoostingClassifier

    >>> X, y = make_hastie_10_2(random_state=0)
    >>> clf = GradientBoostingClassifier(n_estimators=100, learning_rate=1.0,
    ...     max_depth=1, random_state=0).fit(X, y)
    >>> clf.feature_importances_  # doctest: +ELLIPSIS
    array([ 0.11,  0.1 ,  0.11,  ...

.. topic:: Examples:

 * :ref:`sphx_glr_auto_examples_ensemble_plot_gradient_boosting_regression.py`

.. currentmodule:: sklearn.ensemble.partial_dependence

.. _partial_dependence:

Partial dependence
..................

Partial dependence plots (PDP) show the dependence between the target response
and a set of 'target' features, marginalizing over the
values of all other features (the 'complement' features).
Intuitively, we can interpret the partial dependence as the expected
target response [1]_ as a function of the 'target' features [2]_.

Due to the limits of human perception the size of the target feature
set must be small (usually, one or two) thus the target features are
usually chosen among the most important features.

The Figure below shows four one-way and one two-way partial dependence plots
for the California housing dataset:

.. figure:: ../auto_examples/ensemble/images/sphx_glr_plot_partial_dependence_001.png
   :target: ../auto_examples/ensemble/plot_partial_dependence.html
   :align: center
   :scale: 70

One-way PDPs tell us about the interaction between the target
response and the target feature (e.g. linear, non-linear).
The upper left plot in the above Figure shows the effect of the
median income in a district on the median house price; we can
clearly see a linear relationship among them.

PDPs with two target features show the
interactions among the two features. For example, the two-variable PDP in the
above Figure shows the dependence of median house price on joint
values of house age and avg. occupants per household. We can clearly
see an interaction between the two features:
For an avg. occupancy greater than two, the house price is nearly independent
of the house age, whereas for values less than two there is a strong dependence
on age.

The module :mod:`partial_dependence` provides a convenience function
:func:`~sklearn.ensemble.partial_dependence.plot_partial_dependence`
to create one-way and two-way partial dependence plots. In the below example
we show how to create a grid of partial dependence plots: two one-way
PDPs for the features ``0`` and ``1`` and a two-way PDP between the two
features::

    >>> from sklearn.datasets import make_hastie_10_2
    >>> from sklearn.ensemble import GradientBoostingClassifier
    >>> from sklearn.ensemble.partial_dependence import plot_partial_dependence

    >>> X, y = make_hastie_10_2(random_state=0)
    >>> clf = GradientBoostingClassifier(n_estimators=100, learning_rate=1.0,
    ...     max_depth=1, random_state=0).fit(X, y)
    >>> features = [0, 1, (0, 1)]
    >>> fig, axs = plot_partial_dependence(clf, X, features) #doctest: +SKIP

For multi-class models, you need to set the class label for which the
PDPs should be created via the ``label`` argument::

    >>> from sklearn.datasets import load_iris
    >>> iris = load_iris()
    >>> mc_clf = GradientBoostingClassifier(n_estimators=10,
    ...     max_depth=1).fit(iris.data, iris.target)
    >>> features = [3, 2, (3, 2)]
    >>> fig, axs = plot_partial_dependence(mc_clf, X, features, label=0) #doctest: +SKIP

If you need the raw values of the partial dependence function rather
than the plots you can use the
:func:`~sklearn.ensemble.partial_dependence.partial_dependence` function::

    >>> from sklearn.ensemble.partial_dependence import partial_dependence

    >>> pdp, axes = partial_dependence(clf, [0], X=X)
    >>> pdp  # doctest: +ELLIPSIS
    array([[ 2.46643157,  2.46643157, ...
    >>> axes  # doctest: +ELLIPSIS
    [array([-1.62497054, -1.59201391, ...

The function requires either the argument ``grid`` which specifies the
values of the target features on which the partial dependence function
should be evaluated or the argument ``X`` which is a convenience mode
for automatically creating ``grid`` from the training data. If ``X``
is given, the ``axes`` value returned by the function gives the axis
for each target feature.

For each value of the 'target' features in the ``grid`` the partial
dependence function need to marginalize the predictions of a tree over
all possible values of the 'complement' features. In decision trees
this function can be evaluated efficiently without reference to the
training data. For each grid point a weighted tree traversal is
performed: if a split node involves a 'target' feature, the
corresponding left or right branch is followed, otherwise both
branches are followed, each branch is weighted by the fraction of
training samples that entered that branch. Finally, the partial
dependence is given by a weighted average of all visited leaves. For
tree ensembles the results of each individual tree are again
averaged.

.. rubric:: Footnotes

.. [1] For classification with ``loss='deviance'``  the target
   response is logit(p).

.. [2] More precisely its the expectation of the target response after
   accounting for the initial model; partial dependence plots
   do not include the ``init`` model.

.. topic:: Examples:

 * :ref:`sphx_glr_auto_examples_ensemble_plot_partial_dependence.py`


.. topic:: References

 .. [F2001] J. Friedman, "Greedy Function Approximation: A Gradient Boosting Machine",
   The Annals of Statistics, Vol. 29, No. 5, 2001.

 .. [F1999] J. Friedman, "Stochastic Gradient Boosting", 1999

 .. [HTF2009] T. Hastie, R. Tibshirani and J. Friedman, "Elements of Statistical Learning Ed. 2", Springer, 2009.

 .. [R2007] G. Ridgeway, "Generalized Boosted Models: A guide to the gbm package", 2007


 .. _voting_classifier:

VotingClassifier
========================

The idea behind the voting classifier implementation is to combine
conceptually different machine learning classifiers and use a majority vote
or the average predicted probabilities (soft vote) to predict the class labels.
Such a classifier can be useful for a set of equally well performing model
in order to balance out their individual weaknesses.


Majority Class Labels (Majority/Hard Voting)
--------------------------------------------

In majority voting, the predicted class label for a particular sample is
the class label that represents the majority (mode) of the class labels
predicted by each individual classifier.

E.g., if the prediction for a given sample is

- classifier 1 -> class 1
- classifier 2 -> class 1
- classifier 3 -> class 2

the VotingClassifier (with ``voting='hard'``) would classify the sample
as "class 1" based on the majority class label.

In the cases of a tie, the `VotingClassifier` will select the class based
on the ascending sort order. E.g., in the following scenario

- classifier 1 -> class 2
- classifier 2 -> class 1

the class label 1 will be assigned to the sample.

Usage
.....

The following example shows how to fit the majority rule classifier::

   >>> from sklearn import datasets
   >>> from sklearn.model_selection import cross_val_score
   >>> from sklearn.linear_model import LogisticRegression
   >>> from sklearn.naive_bayes import GaussianNB
   >>> from sklearn.ensemble import RandomForestClassifier
   >>> from sklearn.ensemble import VotingClassifier

   >>> iris = datasets.load_iris()
   >>> X, y = iris.data[:, 1:3], iris.target

   >>> clf1 = LogisticRegression(random_state=1)
   >>> clf2 = RandomForestClassifier(random_state=1)
   >>> clf3 = GaussianNB()

   >>> eclf = VotingClassifier(estimators=[('lr', clf1), ('rf', clf2), ('gnb', clf3)], voting='hard')

   >>> for clf, label in zip([clf1, clf2, clf3, eclf], ['Logistic Regression', 'Random Forest', 'naive Bayes', 'Ensemble']):
   ...     scores = cross_val_score(clf, X, y, cv=5, scoring='accuracy')
   ...     print("Accuracy: %0.2f (+/- %0.2f) [%s]" % (scores.mean(), scores.std(), label))
   Accuracy: 0.90 (+/- 0.05) [Logistic Regression]
   Accuracy: 0.93 (+/- 0.05) [Random Forest]
   Accuracy: 0.91 (+/- 0.04) [naive Bayes]
   Accuracy: 0.95 (+/- 0.05) [Ensemble]


Weighted Average Probabilities (Soft Voting)
--------------------------------------------

In contrast to majority voting (hard voting), soft voting
returns the class label as argmax of the sum of predicted probabilities.

Specific weights can be assigned to each classifier via the ``weights``
parameter. When weights are provided, the predicted class probabilities
for each classifier are collected, multiplied by the classifier weight,
and averaged. The final class label is then derived from the class label
with the highest average probability.

To illustrate this with a simple example, let's assume we have 3
classifiers and a 3-class classification problems where we assign
equal weights to all classifiers: w1=1, w2=1, w3=1.

The weighted average probabilities for a sample would then be
calculated as follows:

================  ==========    ==========      ==========
classifier        class 1       class 2         class 3
================  ==========    ==========      ==========
classifier 1	  w1 * 0.2      w1 * 0.5        w1 * 0.3
classifier 2	  w2 * 0.6      w2 * 0.3        w2 * 0.1
classifier 3      w3 * 0.3      w3 * 0.4        w3 * 0.3
weighted average  0.37	        0.4             0.23
================  ==========    ==========      ==========

Here, the predicted class label is 2, since it has the
highest average probability.

The following example illustrates how the decision regions may change
when a soft `VotingClassifier` is used based on an linear Support
Vector Machine, a Decision Tree, and a K-nearest neighbor classifier::

   >>> from sklearn import datasets
   >>> from sklearn.tree import DecisionTreeClassifier
   >>> from sklearn.neighbors import KNeighborsClassifier
   >>> from sklearn.svm import SVC
   >>> from itertools import product
   >>> from sklearn.ensemble import VotingClassifier

   >>> # Loading some example data
   >>> iris = datasets.load_iris()
   >>> X = iris.data[:, [0,2]]
   >>> y = iris.target

   >>> # Training classifiers
   >>> clf1 = DecisionTreeClassifier(max_depth=4)
   >>> clf2 = KNeighborsClassifier(n_neighbors=7)
   >>> clf3 = SVC(kernel='rbf', probability=True)
   >>> eclf = VotingClassifier(estimators=[('dt', clf1), ('knn', clf2), ('svc', clf3)], voting='soft', weights=[2,1,2])

   >>> clf1 = clf1.fit(X,y)
   >>> clf2 = clf2.fit(X,y)
   >>> clf3 = clf3.fit(X,y)
   >>> eclf = eclf.fit(X,y)

.. figure:: ../auto_examples/ensemble/images/sphx_glr_plot_voting_decision_regions_001.png
    :target: ../auto_examples/ensemble/plot_voting_decision_regions.html
    :align: center
    :scale: 75%

Using the `VotingClassifier` with `GridSearch`
----------------------------------------------

The `VotingClassifier` can also be used together with `GridSearch` in order
to tune the hyperparameters of the individual estimators::

   >>> from sklearn.model_selection import GridSearchCV
   >>> clf1 = LogisticRegression(random_state=1)
   >>> clf2 = RandomForestClassifier(random_state=1)
   >>> clf3 = GaussianNB()
   >>> eclf = VotingClassifier(estimators=[('lr', clf1), ('rf', clf2), ('gnb', clf3)], voting='soft')

   >>> params = {'lr__C': [1.0, 100.0], 'rf__n_estimators': [20, 200],}

   >>> grid = GridSearchCV(estimator=eclf, param_grid=params, cv=5)
   >>> grid = grid.fit(iris.data, iris.target)

Usage
.....

In order to predict the class labels based on the predicted
class-probabilities (scikit-learn estimators in the VotingClassifier
must support ``predict_proba`` method)::

   >>> eclf = VotingClassifier(estimators=[('lr', clf1), ('rf', clf2), ('gnb', clf3)], voting='soft')

Optionally, weights can be provided for the individual classifiers::

   >>> eclf = VotingClassifier(estimators=[('lr', clf1), ('rf', clf2), ('gnb', clf3)], voting='soft', weights=[2,5,1])