"""
================================
Visualizing optimization results
================================

Tim Head, August 2016.
Reformatted by Holger Nahrstaedt 2020

.. currentmodule:: skopt

Bayesian optimization or sequential model-based optimization uses a surrogate
model to model the expensive to evaluate objective function `func`. It is
this model that is used to determine at which points to evaluate the expensive
objective next.

To help understand why the optimization process is proceeding the way it is,
it is useful to plot the location and order of the points at which the
objective is evaluated. If everything is working as expected, early samples
will be spread over the whole parameter space and later samples should
cluster around the minimum.

The :class:`plots.plot_evaluations` function helps with visualizing the location and
order in which samples are evaluated for objectives with an arbitrary
number of dimensions.

The :class:`plots.plot_objective` function plots the partial dependence of the objective,
as represented by the surrogate model, for each dimension and as pairs of the
input dimensions.

All of the minimizers implemented in `skopt` return an [`OptimizeResult`]()
instance that can be inspected. Both :class:`plots.plot_evaluations` and :class:`plots.plot_objective`
are helpers that do just that
"""

print(__doc__)
import numpy as np

np.random.seed(123)

import matplotlib.pyplot as plt

from skopt.benchmarks import branin as branin
from skopt.benchmarks import hart6 as hart6_

#############################################################################
# Toy models
# ==========
#
# We will use two different toy models to demonstrate how :class:`plots.plot_evaluations`
# works.
#
# The first model is the :class:`benchmarks.branin` function which has two dimensions and three
# minima.
#
# The second model is the `hart6` function which has six dimension which makes
# it hard to visualize. This will show off the utility of
# :class:`plots.plot_evaluations`.


# redefined `hart6` to allow adding arbitrary "noise" dimensions
def hart6(x):
    return hart6_(x[:6])


#############################################################################
# Starting with `branin`
# ======================
#
# To start let's take advantage of the fact that :class:`benchmarks.branin` is a simple
# function which can be visualised in two dimensions.

from matplotlib.colors import LogNorm


def plot_branin():
    fig, ax = plt.subplots()

    x1_values = np.linspace(-5, 10, 100)
    x2_values = np.linspace(0, 15, 100)
    x_ax, y_ax = np.meshgrid(x1_values, x2_values)
    vals = np.c_[x_ax.ravel(), y_ax.ravel()]
    fx = np.reshape([branin(val) for val in vals], (100, 100))

    cm = ax.pcolormesh(
        x_ax, y_ax, fx, norm=LogNorm(vmin=fx.min(), vmax=fx.max()), cmap='viridis_r'
    )

    minima = np.array([[-np.pi, 12.275], [+np.pi, 2.275], [9.42478, 2.475]])
    ax.plot(minima[:, 0], minima[:, 1], "r.", markersize=14, lw=0, label="Minima")

    cb = fig.colorbar(cm)
    cb.set_label("f(x)")

    ax.legend(loc="best", numpoints=1)

    ax.set_xlabel("$X_0$")
    ax.set_xlim([-5, 10])
    ax.set_ylabel("$X_1$")
    ax.set_ylim([0, 15])


plot_branin()

#############################################################################
# Evaluating the objective function
# =================================
#
# Next we use an extra trees based minimizer to find one of the minima of the
# :class:`benchmarks.branin` function. Then we visualize at which points the objective is being
# evaluated using :class:`plots.plot_evaluations`.

from skopt import dummy_minimize, forest_minimize
from skopt.plots import plot_evaluations

bounds = [(-5.0, 10.0), (0.0, 15.0)]
n_calls = 20
n_jobs = -1

forest_res = forest_minimize(
    branin, bounds, n_calls=n_calls, n_jobs=n_jobs, base_estimator="ET", random_state=4
)

_ = plot_evaluations(forest_res, bins=10)

#############################################################################
# :class:`plots.plot_evaluations` creates a grid of size `n_dims` by `n_dims`.
# The diagonal shows histograms for each of the dimensions. In the lower
# triangle (just one plot in this case) a two dimensional scatter plot of all
# points is shown. The order in which points were evaluated is encoded in the
# color of each point. Darker/purple colors correspond to earlier samples and
# lighter/yellow colors correspond to later samples. A red point shows the
# location of the minimum found by the optimization process.
#
# You should be able to see that points start clustering around the location
# of the true miminum. The histograms show that the objective is evaluated
# more often at locations near to one of the three minima.
#
# Using :class:`plots.plot_objective` we can visualise the one dimensional partial
# dependence of the surrogate model for each dimension. The contour plot in
# the bottom left corner shows the two dimensional partial dependence. In this
# case this is the same as simply plotting the objective as it only has two
# dimensions.
#
# Partial dependence plots
# ------------------------
#
# Partial dependence plots were proposed by
# `Friedman (2001)`_
# as a method for interpreting the importance of input features used in
# gradient boosting machines. Given a function of :math:`k`: variables
# :math:`y=f\left(x_1, x_2, ..., x_k\right)`: the
# partial dependence of $f$ on the $i$-th variable $x_i$ is calculated as:
# :math:`\phi\left( x_i \right) = \frac{1}{N} \sum^N_{j=0}f\left(x_{1,j}, x_{2,j}, ..., x_i, ..., x_{k,j}\right)`:
# with the sum running over a set of $N$ points drawn at random from the
# search space.
#
# The idea is to visualize how the value of :math:`x_j`: influences the function
# :math:`f`: after averaging out the influence of all other variables.
#
# .. _Friedman (2001): https://dx.doi.org/10.1214/aos/1013203451

from skopt.plots import plot_objective

_ = plot_objective(forest_res, n_samples=10, n_points=10)

#############################################################################
# The two dimensional partial dependence plot can look like the true
# objective but it does not have to. As points at which the objective function
# is being evaluated are concentrated around the suspected minimum the
# surrogate model sometimes is not a good representation of the objective far
# away from the minima.
#
# Random sampling
# ===============
#
# Compare this to a minimizer which picks points at random. There is no
# structure visible in the order in which it evaluates the objective. Because
# there is no model involved in the process of picking sample points at
# random, we can not plot the partial dependence of the model.

dummy_res = dummy_minimize(branin, bounds, n_calls=n_calls, random_state=4)

_ = plot_evaluations(dummy_res, bins=10)

#############################################################################
# Working in six dimensions
# =========================
#
# Visualising what happens in two dimensions is easy, where
# :class:`plots.plot_evaluations` and :class:`plots.plot_objective` start to be useful is when the
# number of dimensions grows. They take care of many of the more mundane
# things needed to make good plots of all combinations of the dimensions.
#
# The next example uses class:`benchmarks.hart6` which has six dimensions and shows both
# :class:`plots.plot_evaluations` and :class:`plots.plot_objective`.

bounds = [
    (0.0, 1.0)
] * 6

forest_res = forest_minimize(
    hart6, bounds, n_calls=n_calls, n_jobs=n_jobs, base_estimator="ET", random_state=4
)

#############################################################################

_ = plot_evaluations(forest_res)
_ = plot_objective(forest_res, n_samples=10, n_points=10)

#############################################################################
# Going from 6 to 6+2 dimensions
# ==============================
#
# To make things more interesting let's add two dimension to the problem.
# As :class:`benchmarks.hart6` only depends on six dimensions we know that for this problem
# the new dimensions will be "flat" or uninformative. This is clearly visible
# in both the placement of samples and the partial dependence plots.


bounds = [(0., 1.)] * 8

forest_res = forest_minimize(
    hart6, bounds, n_calls=n_calls, n_jobs=n_jobs, base_estimator="ET", random_state=4
)

_ = plot_evaluations(forest_res)
_ = plot_objective(forest_res, n_samples=10, n_points=10)