.. _making-a-release:

Making a SciPy release
======================

At the highest level, this is what the release manager does to release a new
SciPy version:

#. Propose a release schedule on the scipy-dev mailing list.
#. Create the maintenance branch for the release.
#. Tag the release.
#. Build all release artifacts (sources, installers, docs).
#. Upload the release artifacts.
#. Announce the release.
#. Port relevant changes to release notes and build scripts to master.

In this guide we attempt to describe in detail how to perform each of the above
steps.  In addition to those steps, which have to be performed by the release
manager, here are descriptions of release-related activities and conventions of
interest:

- :ref:`backporting`
- :ref:`labels-and-milestones`
- :ref:`version-numbering`
- :ref:`supported-py-numpy-versions`
- :ref:`deprecations`


Proposing a release schedule
----------------------------
A typical release cycle looks like:

- Create the maintenance branch
- Release a beta version
- Release a "release candidate" (RC)
- If needed, release one or more new RCs
- Release the final version once there are no issues with the last release
  candidate

There's usually at least one week between each of the above steps.  Experience
shows that a cycle takes between 4 and 8 weeks for a new minor version.
Bug-fix versions don't need a beta or RC, and can be done much quicker.

Ideally the final release is identical to the last RC, however there may be
minor difference - it's up to the release manager to judge the risk of that.
Typically, if compiled code or complex pure Python code changes then a new RC
is needed, while a simple bug-fix that's backported from master doesn't require
a new RC.

To propose a schedule, send a list with estimated dates for branching and
beta/rc/final releases to scipy-dev. In the same email, ask everyone to check
if there are important issues/PRs that need to be included and aren't tagged
with the Milestone for the release or the "backport-candidate" label.


Creating the maintenance branch
-------------------------------
Before branching, ensure that the release notes are updated as far as possible.
Include the output of ``tools/gh_lists.py`` and ``tools/authors.py`` in the
release notes.

Maintenance branches are named ``maintenance/<major>.<minor>.x`` (e.g. 0.19.x).
To create one, simply push a branch with the correct name to the scipy repo.
Immediately after, push a commit where you increment the version number on the
master branch and add release notes for that new version.  Send an email to
scipy-dev to let people know that you've done this.


Tagging a release
-----------------
First ensure that you have set up GPG correctly.  See
https://github.com/scipy/scipy/issues/4919 for a discussion of signing release
tags, and https://keyring.debian.org/creating-key.html for instructions on
creating a GPG key if you do not have one. Note that on some platforms
it may be more suitable to use ``gpg2`` instead of ``gpg`` so that
passwords may be stored by ``gpg-agent`` as discussed in
https://github.com/scipy/scipy/issues/10189.

To make your key more readily identifiable as you, consider sending your key
to public keyservers, with a command such as::

    gpg --send-keys <yourkeyid>

Check that all relevant commits are in the branch.  In particular, check issues
and PRs under the Milestone for the release
(https://github.com/scipy/scipy/milestones), PRs labeled "backport-candidate",
and that the release notes are up-to-date and included in the html docs.

Then edit ``setup.py`` to get the correct version number (set
``ISRELEASED = True``) and commit it with a message like ``REL: set version to
<version-number>``.  Don't push this commit to the SciPy repo yet.

Finally tag the release locally with ``git tag -s <v1.x.y>`` (the ``-s`` ensures
the tag is signed). If ``gpg2`` is preferred, then
``git config --global gpg.program gpg2`` may be appropriate. Continue with
building release artifacts (next section).
Only push the release commit to the scipy repo once you have built the
sdists and docs successfully.  Then continue with building wheels.  Only push
the release tag to the repo once all wheels have been built successfully on
TravisCI and Appveyor (if it fails, you have to move the tag otherwise - which
is bad practice).  Finally, after pushing the tag, also push a second
commit which increments the version number and sets ``ISRELEASED`` to False
again. This also applies with new release candidates, and for removing the
``rc`` affix when switching from release candidate to release proper.


Building release artifacts
--------------------------
Here is a complete list of artifacts created for a release:

- source archives (``.tar.gz``, ``.zip`` and ``.tar.xz`` for GitHub Releases,
  only ``.tar.gz`` is uploaded to PyPI)
- Binary wheels for Windows, Linx and OS X
- Documentation (``html``, ``pdf``)
- A ``README`` file
- A ``Changelog`` file

Source archives, Changelog and README are built by running ``paver release`` in
the repo root, and end up in ``REPO_ROOT/release/``.  Do this after you've
created the signed tag locally. ``paver release`` will be sensitive to the version
of Cython available in your build environment, so make sure your version matches the
minimum requirements for the release. If this completes without issues, push the release
commit (not the tag, see section above) to the scipy repo. If ``pavement.py`` is causing
issues, it is also possible to simply use ``python setup.py sdist`` and perform the
release notes task from ``pavement.py`` by hand.

To build wheels, push a commit to a branch used for the current release at
https://github.com/MacPython/scipy-wheels . This triggers builds for all needed
Python versions on TravisCI.  Update and check the ``.travis.yml`` and ``appveyor.yml``
config files what commit to build, and what Python and NumPy are used for the
builds (it needs to be the lowest supported NumPy version for each Python
version). See the README file in the scipy-wheels repo for more details. Note that
because several months may pass between ``SciPy`` releases, it is sometimes necessary
to update the versions of the ``gfortran-install`` and ``multibuild`` submodules
used for wheel builds. If the wheels builds reveal issues that need to be fixed
with backports on the maintenance branch, you may remove the local tags (for example
``git tag -d v1.2.0rc1``) and restart with tagging above on the new candidate commit.

The TravisCI and Appveyor builds run the tests from the built wheels and if they pass,
upload the wheels to a container pointed to at https://github.com/MacPython/scipy-wheels
Once there are successful wheel builds, it is recommended to create a versioned branch
in the ``scipy-wheels`` repo, which will for example be adjusted to point to different
maintenance branch commits if there are multiple release candidates.

From there you can download them for uploading to PyPI. This can be
done in an automated fashion using ``tools/download-wheels.py``::

  $ python tools/download-wheels.py 1.5.0rc1 -w REPO_ROOT/release/installers

The correct URL to use is shown in https://github.com/MacPython/scipy-wheels
and should agree with the above one.

After this, we want to regenerate the README file, in order to have the MD5 and SHA256
checksums of the just downloaded wheels in it.  Run::

  $ paver write_release_and_log


Uploading release artifacts
---------------------------
For a release there are currently five places on the web to upload things to:

- PyPI (tarballs, wheels)
- Github releases (tarballs, release notes, Changelog)
- scipy.org (an announcement of the release)
- docs.scipy.org (html/pdf docs)

**PyPI:**

Upload first the wheels and then the sdist::

  twine upload -s REPO_ROOT/release/installers/*.whl
  twine upload -s REPO_ROOT/release/installers/scipy-1.x.y.tar.gz

If ``gpg2`` is preferred, then the above commands may also include
``--sign-with gpg2``

**Github Releases:**

Use GUI on https://github.com/scipy/scipy/releases to create release and
upload all release artifacts. At this stage, it is appropriate to push
the tag and associate the new release (candidate) with this tag in the GUI.
For example, ``git push upstream v1.2.0rc1``, where ``upstream`` represents
``scipy/scipy``. It is useful to check a previous
release to determine exactly which artifacts should be included in the GUI
upload process. Also, note that the release notes are not automatically populated
into the release description on GitHub, and some manual reformatting to markdown
can be quite helpful to match the formatting of previous releases on the site.
We generally do not include Issue and Pull Request lists in these GUI
descriptions.

**scipy.org:**

Sources for the site are in https://github.com/scipy/scipy.org.
Update the News section in ``www/index.rst`` and then do
``make upload USERNAME=yourusername``. This is only for proper releases,
not release candidates.

**docs.scipy.org:**

First build the scipy docs, by running ``make dist`` in ``scipy/doc/``.  Verify
that they look OK, then upload them to the doc server with
``make upload USERNAME=rgommers RELEASE=0.19.0``.  Note that SSH access to the
doc server is needed; ask @pv (server admin) or @rgommers (can upload) if you
don't have that.

The sources for the website itself are maintained in
https://github.com/scipy/docs.scipy.org/.  Add the new SciPy version in the
table of releases in ``index.rst``.  Push that commit, then do ``make upload
USERNAME=yourusername``. This is only for proper releases,
not release candidates.


Wrapping up
-----------
Send an email announcing the release to the following mailing lists:

- scipy-dev
- numpy-discussion
- python-announce (not for beta/rc releases)

For beta and rc versions, ask people in the email to test (run the scipy tests
and test against their own code) and report issues on Github or scipy-dev.

After the final release is done, port relevant changes to release notes, build
scripts, author name mapping in ``tools/authors.py`` and any other changes that
were only made on the maintenance branch to master.