#! /bin/sh

#
# Copyright (c) 1999, 2010 Tanuki Software, Ltd.
# http://www.tanukisoftware.com
# All rights reserved.
#
# This software is the proprietary information of Tanuki Software.
# You shall use it only in accordance with the terms of the
# license agreement you entered into with Tanuki Software.
# http://wrapper.tanukisoftware.com/doc/english/licenseOverview.html
#
# Java Service Wrapper sh script.  Suitable for starting and stopping
#  wrapped Java applications on UNIX platforms.
#

#-----------------------------------------------------------------------------
# These settings can be modified to fit the needs of your application
# Optimized for use with version 3.5.3 of the Wrapper.

# Application
APP_NAME="filter"
APP_LONG_NAME="Filter Case"

# Wrapper
WRAPPER_CMD="../bin/wrapper"
WRAPPER_CONF="../test/filter.conf"

# Priority at which to run the wrapper.  See "man nice" for valid priorities.
#  nice is only used if a priority is specified.
PRIORITY=

# Location of the pid file.
PIDDIR="."

# If uncommented, causes the Wrapper to be shutdown using an anchor file.
#  When launched with the 'start' command, it will also ignore all INT and
#  TERM signals.
#IGNORE_SIGNALS=true

# Wrapper will start the JVM asynchronously. Your application may have some
#  initialization tasks and it may be desirable to wait a few seconds
#  before returning.  For example, to delay the invocation of following
#  startup scripts.  Setting WAIT_AFTER_STARTUP to a positive number will
#  cause the start command to delay for the indicated period of time 
#  (in seconds).
# 
WAIT_AFTER_STARTUP=0

# If set, wait for the wrapper to report that the daemon has started
WAIT_FOR_STARTED_STATUS=true
WAIT_FOR_STARTED_TIMEOUT=120

# If set, the status, start_msg and stop_msg commands will print out detailed
#   state information on the Wrapper and Java processes.
#DETAIL_STATUS=true

# If specified, the Wrapper will be run as the specified user.
# IMPORTANT - Make sure that the user has the required privileges to write
#  the PID file and wrapper.log files.  Failure to be able to write the log
#  file will cause the Wrapper to exit without any way to write out an error
#  message.
# NOTE - This will set the user which is used to run the Wrapper as well as
#  the JVM and is not useful in situations where a privileged resource or
#  port needs to be allocated prior to the user being changed.
#RUN_AS_USER=

# The following two lines are used by the chkconfig command. Change as is
#  appropriate for your application.  They should remain commented.
# chkconfig: 2345 20 80
# description: Filter Case

# When installing on On Mac OSX platforms, the following domain will be used to
#  prefix the plist file name.
PLIST_DOMAIN=org.tanukisoftware.wrapper
 
# Initialization block for the install_initd and remove_initd scripts used by
#  SUSE linux distributions.
### BEGIN INIT INFO
# Provides: filter
# Required-Start: $local_fs $network $syslog
# Should-Start: 
# Required-Stop:
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
# Short-Description: Filter Case
# Description: @app.description@
### END INIT INFO

# Do not modify anything beyond this point
#-----------------------------------------------------------------------------

# Required for HP-UX Startup
if [ `uname -s` = "HP-UX" -o `uname -s` = "HP-UX64" ] ; then
        PATH=$PATH:/usr/bin
fi

# Get the fully qualified path to the script
case $0 in
    /*)
        SCRIPT="$0"
        ;;
    *)
        PWD=`pwd`
        SCRIPT="$PWD/$0"
        ;;
esac

# Resolve the true real path without any sym links.
CHANGED=true
while [ "X$CHANGED" != "X" ]
do
    # Change spaces to ":" so the tokens can be parsed.
    SAFESCRIPT=`echo $SCRIPT | sed -e 's; ;:;g'`
    # Get the real path to this script, resolving any symbolic links
    TOKENS=`echo $SAFESCRIPT | sed -e 's;/; ;g'`
    REALPATH=
    for C in $TOKENS; do
        # Change any ":" in the token back to a space.
        C=`echo $C | sed -e 's;:; ;g'`
        REALPATH="$REALPATH/$C"
        # If REALPATH is a sym link, resolve it.  Loop for nested links.
        while [ -h "$REALPATH" ] ; do
            LS="`ls -ld "$REALPATH"`"
            LINK="`expr "$LS" : '.*-> \(.*\)$'`"
            if expr "$LINK" : '/.*' > /dev/null; then
                # LINK is absolute.
                REALPATH="$LINK"
            else
                # LINK is relative.
                REALPATH="`dirname "$REALPATH"`""/$LINK"
            fi
        done
    done

    if [ "$REALPATH" = "$SCRIPT" ]
    then
        CHANGED=""
    else
        SCRIPT="$REALPATH"
    fi
done

# Change the current directory to the location of the script
cd "`dirname "$REALPATH"`"
REALDIR=`pwd`

# If the PIDDIR is relative, set its value relative to the full REALPATH to avoid problems if
#  the working directory is later changed.
FIRST_CHAR=`echo $PIDDIR | cut -c1,1`
if [ "$FIRST_CHAR" != "/" ]
then
    PIDDIR=$REALDIR/$PIDDIR
fi
# Same test for WRAPPER_CMD
FIRST_CHAR=`echo $WRAPPER_CMD | cut -c1,1`
if [ "$FIRST_CHAR" != "/" ]
then
    WRAPPER_CMD=$REALDIR/$WRAPPER_CMD
fi
# Same test for WRAPPER_CONF
FIRST_CHAR=`echo $WRAPPER_CONF | cut -c1,1`
if [ "$FIRST_CHAR" != "/" ]
then
    WRAPPER_CONF=$REALDIR/$WRAPPER_CONF
fi

# Process ID
ANCHORFILE="$PIDDIR/$APP_NAME.anchor"
STATUSFILE="$PIDDIR/$APP_NAME.status"
JAVASTATUSFILE="$PIDDIR/$APP_NAME.java.status"
PIDFILE="$PIDDIR/$APP_NAME.pid"
LOCKDIR="/var/lock/subsys"
LOCKFILE="$LOCKDIR/$APP_NAME"
pid=""

# Resolve the location of the 'ps' command
PSEXE="/usr/ucb/ps"
    if [ ! -x "$PSEXE" ]
    then
        PSEXE="/usr/bin/ps"
        if [ ! -x "$PSEXE" ]
        then
            PSEXE="/bin/ps"
            if [ ! -x "$PSEXE" ]
            then
                eval echo  'Unable to locate "ps".'
                eval echo  'Please report this message along with the location of the command on your system.'
                exit 1
            fi
        fi
    fi

# Resolve the os
DIST_OS=`uname -s | tr [A-Z] [a-z] | tr -d ' '`
case "$DIST_OS" in
    'sunos')
        DIST_OS="solaris"
        ;;
    'hp-ux' | 'hp-ux64')
        # HP-UX needs the XPG4 version of ps (for -o args)
        DIST_OS="hpux"
        UNIX95=""
        export UNIX95   
        ;;
    'darwin')
        DIST_OS="macosx"
        ;;
    'unix_sv')
        DIST_OS="unixware"
        ;;
    'os/390')
        DIST_OS="zos"
        ;;
esac

# Resolve the architecture
if [ "$DIST_OS" = "macosx" ]
then
    OS_VER=`sw_vers | grep 'ProductVersion:' | grep -o '[0-9]*\.[0-9]*\.[0-9]*'`
    DIST_ARCH="universal"
    if [[ "$OS_VER" < "10.5.0" ]]
    then
        DIST_BITS="32"
    else
        DIST_BITS="64"
    fi
    APP_PLIST_BASE=${PLIST_DOMAIN}.${APP_NAME}
    APP_PLIST=${APP_PLIST_BASE}.plist
else
    DIST_ARCH=
    DIST_ARCH=`uname -p 2>/dev/null | tr [A-Z] [a-z] | tr -d ' '`
    if [ "X$DIST_ARCH" = "X" ]
    then
        DIST_ARCH="unknown"
    fi
    if [ "$DIST_ARCH" = "unknown" ]
    then
        DIST_ARCH=`uname -m 2>/dev/null | tr [A-Z] [a-z] | tr -d ' '`
    fi
    case "$DIST_ARCH" in
        'athlon' | 'i386' | 'i486' | 'i586' | 'i686')
            DIST_ARCH="x86"
            if [ "${DIST_OS}" = "solaris" ] ; then
                DIST_BITS=`isainfo -b`
            else
                DIST_BITS="32"
            fi
            ;;
        'amd64' | 'x86_64')
            DIST_ARCH="x86"
            DIST_BITS="64"
            ;;
        'ia32')
            DIST_ARCH="ia"
            DIST_BITS="32"
            ;;
        'ia64' | 'ia64n' | 'ia64w')
            DIST_ARCH="ia"
            DIST_BITS="64"
            ;;
        'ip27')
            DIST_ARCH="mips"
            DIST_BITS="32"
            ;;
        'power' | 'powerpc' | 'power_pc' | 'ppc64')
            if [ "${DIST_ARCH}" = "ppc64" ] ; then
                DIST_BITS="64"
            else
                DIST_BITS="32"
            fi
            DIST_ARCH="ppc"
            if [ "${DIST_OS}" = "aix" ] ; then
                if [ `getconf KERNEL_BITMODE` -eq 64 ]; then
                    DIST_BITS="64"
                else
                    DIST_BITS="32"
                fi
            fi
            ;;
        'pa_risc' | 'pa-risc')
            DIST_ARCH="parisc"
            if [ `getconf KERNEL_BITS` -eq 64 ]; then
                DIST_BITS="64"
            else
                DIST_BITS="32"
            fi    
            ;;
        'sun4u' | 'sparcv9' | 'sparc')
            DIST_ARCH="sparc"
            DIST_BITS=`isainfo -b`
            ;;
        '9000/800' | '9000/785')
            DIST_ARCH="parisc"
            if [ `getconf KERNEL_BITS` -eq 64 ]; then
                DIST_BITS="64"
            else
                DIST_BITS="32"
            fi
            ;;
        '2097')
            DIST_ARCH="390"
            DIST_BITS="32"
            ;;
    esac
fi

# OSX always places Java in the same location so we can reliably set JAVA_HOME
if [ "$DIST_OS" = "macosx" ]
then
    if [ -z "$JAVA_HOME" ]; then
        JAVA_HOME="/Library/Java/Home"; export JAVA_HOME
    fi
fi

# Test Echo
ECHOTEST=`echo -n "x"`
if [ "$ECHOTEST" = "x" ]
then
    ECHOOPT="-n "
else
    ECHOOPT=""
fi


gettext() {
    echo "$1"
}

outputFile() {
    if [ -f "$1" ]
    then
        eval echo  '  $1  Found but not executable.';
    else
        echo "  $1"
    fi
}

# Decide on the wrapper binary to use.
# If the bits of the OS could be detected, we will try to look for the
#  binary with the correct bits value.  If it doesn't exist, fall back
#  and look for the 32-bit binary.  If that doesn't exist either then
#  look for the default.
WRAPPER_TEST_CMD=""
if [ -f "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-$DIST_BITS" ]
then
    WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-$DIST_BITS"
    if [ ! -x "$WRAPPER_TEST_CMD" ]
    then
        chmod +x "$WRAPPER_TEST_CMD" 2>/dev/null
    fi
    if [ -x "$WRAPPER_TEST_CMD" ]
    then 
        WRAPPER_CMD="$WRAPPER_TEST_CMD"
    else
        outputFile "$WRAPPER_TEST_CMD"
        WRAPPER_TEST_CMD=""
    fi
fi
if [ -f "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32" -a -z "$WRAPPER_TEST_CMD" ]
then
    WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
    if [ ! -x "$WRAPPER_TEST_CMD" ]
    then
        chmod +x "$WRAPPER_TEST_CMD" 2>/dev/null
    fi
    if [ -x "$WRAPPER_TEST_CMD" ]
    then 
        WRAPPER_CMD="$WRAPPER_TEST_CMD"
    else
        outputFile "$WRAPPER_TEST_CMD"
        WRAPPER_TEST_CMD=""
    fi
fi
if [ -f "$WRAPPER_CMD" -a -z "$WRAPPER_TEST_CMD" ]
then
    WRAPPER_TEST_CMD="$WRAPPER_CMD"
    if [ ! -x "$WRAPPER_TEST_CMD" ]
    then
        chmod +x "$WRAPPER_TEST_CMD" 2>/dev/null
    fi
    if [ -x "$WRAPPER_TEST_CMD" ]
    then 
        WRAPPER_CMD="$WRAPPER_TEST_CMD"
    else
        outputFile "$WRAPPER_TEST_CMD"
        WRAPPER_TEST_CMD=""
    fi
fi
if [ -z "$WRAPPER_TEST_CMD" ]
then
    eval echo  'Unable to locate any of the following binaries:'
    outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-$DIST_BITS"
    if [ ! "$DIST_BITS" = "32" ]
    then
        outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
    fi
    outputFile "$WRAPPER_CMD"

    exit 1
fi


# Build the nice clause
if [ "X$PRIORITY" = "X" ]
then
    CMDNICE=""
else
    CMDNICE="nice -$PRIORITY"
fi

# Build the anchor file clause.
if [ "X$IGNORE_SIGNALS" = "X" ]
then
   ANCHORPROP=
   IGNOREPROP=
else
   ANCHORPROP=wrapper.anchorfile=\"$ANCHORFILE\"
   IGNOREPROP=wrapper.ignore_signals=TRUE
fi

# Build the status file clause.
if [ "X$DETAIL_STATUS$WAIT_FOR_STARTED_STATUS" = "X" ]
then
   STATUSPROP=
else
   STATUSPROP="wrapper.statusfile=\"$STATUSFILE\" wrapper.java.statusfile=\"$JAVASTATUSFILE\""
fi

if [ ! -n "$WAIT_FOR_STARTED_STATUS" ]
then
    WAIT_FOR_STARTED_STATUS=true
fi

if [ $WAIT_FOR_STARTED_STATUS = true ] ; then
    DETAIL_STATUS=true
fi


# Build the lock file clause.  Only create a lock file if the lock directory exists on this platform.
LOCKPROP=
if [ -d $LOCKDIR ]
then
    if [ -w $LOCKDIR ]
    then
        LOCKPROP=wrapper.lockfile=\"$LOCKFILE\"
    fi
fi

checkUser() {
    # $1 touchLock flag
    # $2 command

    # Check the configured user.  If necessary rerun this script as the desired user.
    if [ "X$RUN_AS_USER" != "X" ]
    then
        # Resolve the location of the 'id' command
        IDEXE="/usr/xpg4/bin/id"
        if [ ! -x "$IDEXE" ]
        then
            IDEXE="/usr/bin/id"
            if [ ! -x "$IDEXE" ]
            then
                eval echo  'Unable to locate "id".'
                eval echo  'Please report this message along with the location of the command on your system.'
                exit 1
            fi
        fi

        if [ "`$IDEXE -u -n`" = "$RUN_AS_USER" ]
        then
            # Already running as the configured user.  Avoid password prompts by not calling su.
            RUN_AS_USER=""
        fi
    fi
    if [ "X$RUN_AS_USER" != "X" ]
    then
        # If LOCKPROP and $RUN_AS_USER are defined then the new user will most likely not be
        # able to create the lock file.  The Wrapper will be able to update this file once it
        # is created but will not be able to delete it on shutdown.  If $2 is defined then
        # the lock file should be created for the current command
        if [ "X$LOCKPROP" != "X" ]
        then
            if [ "X$1" != "X" ]
            then
                # Resolve the primary group 
                RUN_AS_GROUP=`groups $RUN_AS_USER | awk '{print $3}' | tail -1`
                if [ "X$RUN_AS_GROUP" = "X" ]
                then
                    RUN_AS_GROUP=$RUN_AS_USER
                fi
                touch $LOCKFILE
                chown $RUN_AS_USER:$RUN_AS_GROUP $LOCKFILE
            fi
        fi

        # Still want to change users, recurse.  This means that the user will only be
        #  prompted for a password once. Variables shifted by 1
        # 
        # Use "runuser" if this exists.  runuser should be used on RedHat in preference to su.
        #
        if test -f "/sbin/runuser"
        then
            /sbin/runuser - $RUN_AS_USER -c "\"$REALPATH\" $2"
        else
            su - $RUN_AS_USER -c "\"$REALPATH\" $2"
        fi

        # Now that we are the original user again, we may need to clean up the lock file.
        if [ "X$LOCKPROP" != "X" ]
        then
            getpid
            if [ "X$pid" = "X" ]
            then
                # Wrapper is not running so make sure the lock file is deleted.
                if [ -f "$LOCKFILE" ]
                then
                    rm "$LOCKFILE"
                fi
            fi
        fi

        exit 0
    fi
}

getpid() {
    pid=""
    if [ -f "$PIDFILE" ]
    then
        if [ -r "$PIDFILE" ]
        then
            pid=`cat "$PIDFILE"`
            if [ "X$pid" != "X" ]
            then
                # It is possible that 'a' process with the pid exists but that it is not the
                #  correct process.  This can happen in a number of cases, but the most
                #  common is during system startup after an unclean shutdown.
                # The ps statement below looks for the specific wrapper command running as
                #  the pid.  If it is not found then the pid file is considered to be stale.
                case "$DIST_OS" in
                    'freebsd')
                        pidtest=`$PSEXE -p $pid -o args | tail -1`
                        if [ "X$pidtest" = "XCOMMAND" ]
                        then 
                            pidtest=""
                        fi
                        ;;
                    'macosx')
                        pidtest=`$PSEXE -ww -p $pid -o command | grep "$WRAPPER_CMD" | tail -1`
                        ;;
                    'solaris')
                        if [ -f "/usr/bin/pargs" ]
                        then
                            pidtest=`pargs $pid | grep "$WRAPPER_CMD" | tail -1`
                        else
                            case "$PSEXE" in
                            '/usr/ucb/ps')
                                pidtest=`$PSEXE -auxww  $pid | grep "$WRAPPER_CMD" | tail -1`
                                ;;
                            '/usr/bin/ps')
                                TRUNCATED_CMD=`$PSEXE -o comm -p $pid | tail -1`
                                COUNT=`echo $TRUNCATED_CMD | wc -m`
                                COUNT=`echo ${COUNT}`
                                COUNT=`expr $COUNT - 1`
                                TRUNCATED_CMD=`echo $WRAPPER_CMD | cut -c1-$COUNT`
                                pidtest=`$PSEXE -o comm -p $pid | grep "$TRUNCATED_CMD" | tail -1`
                                ;;
                            '/bin/ps')
                                TRUNCATED_CMD=`$PSEXE -o comm -p $pid | tail -1`
                                COUNT=`echo $TRUNCATED_CMD | wc -m`
                                COUNT=`echo ${COUNT}`
                                COUNT=`expr $COUNT - 1`
                                TRUNCATED_CMD=`echo $WRAPPER_CMD | cut -c1-$COUNT`
                                pidtest=`$PSEXE -o comm -p $pid | grep "$TRUNCATED_CMD" | tail -1`
                                ;;
                            *)
                                echo "Unsupported ps command $PSEXE"
                                exit 1
                                ;;
                            esac
                        fi
                        ;;
                    'hpux')
                        pidtest=`$PSEXE -p $pid -x -o args | grep "$WRAPPER_CMD" | tail -1`
                        ;;
                    *)
                        pidtest=`$PSEXE -p $pid -o args | grep "$WRAPPER_CMD" | tail -1`
                        ;;
                esac

                if [ "X$pidtest" = "X" ]
                then
                    # This is a stale pid file.
                    rm -f "$PIDFILE"
                    eval echo  'Removed stale pid file: $PIDFILE'
                    pid=""
                fi
            fi
        else
            eval echo  'Cannot read $PIDFILE.'
            exit 1
        fi
    fi
}

getstatus() {
    STATUS=
    if [ -f "$STATUSFILE" ]
    then
        if [ -r "$STATUSFILE" ]
        then
            STATUS=`cat "$STATUSFILE"`
        fi
    fi
    if [ "X$STATUS" = "X" ]
    then
        STATUS="Unknown"
    fi
    
    JAVASTATUS=
    if [ -f "$JAVASTATUSFILE" ]
    then
        if [ -r "$JAVASTATUSFILE" ]
        then
            JAVASTATUS=`cat "$JAVASTATUSFILE"`
        fi
    fi
    if [ "X$JAVASTATUS" = "X" ]
    then
        JAVASTATUS="Unknown"
    fi
}

testpid() {
    case "$DIST_OS" in
     'solaris')
        case "$PSEXE" in
        '/usr/ucb/ps')
            pid=`$PSEXE  $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1`
            ;;
        '/usr/bin/ps')
            pid=`$PSEXE -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1`
            ;;
        '/bin/ps')
            pid=`$PSEXE -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1`
            ;;
        *)
            echo "Unsupported ps command $PSEXE"
            exit 1
            ;;
        esac
        ;;
    *)
        pid=`$PSEXE -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1` 2>/dev/null
        ;;
    esac
    if [ "X$pid" = "X" ]
    then
        # Process is gone so remove the pid file.
        rm -f "$PIDFILE"
        pid=""
    fi
}

launchdtrap() {
    stopit
    exit 
}

waitforwrapperstop() {
    getpid
    while [ "X$pid" != "X" ] ; do
        sleep 1
        getpid
    done
}

launchdinternal() {
    getpid
    trap launchdtrap TERM 
    if [ "X$pid" = "X" ]
    then 
        # The string passed to eval must handles spaces in paths correctly.
        COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=\"$APP_NAME\" wrapper.pidfile=\"$PIDFILE\" wrapper.name=\"$APP_NAME\" wrapper.displayname=\"$APP_LONG_NAME\" wrapper.daemonize=TRUE $ANCHORPROP $IGNOREPROP $STATUSPROP $LOCKPROP"
        eval $COMMAND_LINE
    else
        eval echo  '$APP_LONG_NAME is already running.'
        exit 1
    fi
    # launchd expects that this script stay up and running so we need to do our own monitoring of the Wrapper process.
    if [ $WAIT_FOR_STARTED_STATUS = true ]
    then
        waitforwrapperstop
    fi
}

console() {
    eval echo  'Running $APP_LONG_NAME...'
    getpid
    if [ "X$pid" = "X" ]
    then
        trap '' 3
        # The string passed to eval must handles spaces in paths correctly.
        COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=\"$APP_NAME\" wrapper.pidfile=\"$PIDFILE\" wrapper.name=\"$APP_NAME\" wrapper.displayname=\"$APP_LONG_NAME\" $ANCHORPROP $STATUSPROP $LOCKPROP"
        eval $COMMAND_LINE
    else
        eval echo  '$APP_LONG_NAME is already running.'
        exit 1
    fi
}

waitforjavastartup() {
    getstatus
    eval echo $ECHOOPT `gettext 'Waiting for $APP_LONG_NAME...'`
    
    # Wait until the timeout or we have something besides Unknown.
    counter=15
    while [ "$JAVASTATUS" = "Unknown" -a $counter -gt 0 -a -n "$JAVASTATUS" ] ; do
        echo $ECHOOPT"."
        sleep 1
        getstatus
        counter=`expr $counter - 1`
    done
    
    if [ -n "$WAIT_FOR_STARTED_TIMEOUT" ] ; then 
        counter=$WAIT_FOR_STARTED_TIMEOUT
    else
        counter=120
    fi
    while [ "$JAVASTATUS" != "STARTED" -a "$JAVASTATUS" != "Unknown" -a $counter -gt 0 -a -n "$JAVASTATUS" ] ; do
        echo $ECHOOPT"."
        sleep 1
        getstatus
        counter=`expr $counter - 1`
    done
    if [ "X$ECHOOPT" != "X" ] ; then
        echo ""
    fi
}
 
startwait() {
    if [ $WAIT_FOR_STARTED_STATUS = true ]
    then
        waitforjavastartup
    fi
    # Sleep for a few seconds to allow for intialization if required 
    #  then test to make sure we're still running.
    #
    i=0
    while [ $i -lt $WAIT_AFTER_STARTUP ]
    do
        sleep 1
        echo $ECHOOPT"."
        i=`expr $i + 1`
    done
    if [ $WAIT_AFTER_STARTUP -gt 0 -o $WAIT_FOR_STARTED_STATUS = true ]
    then
        getpid
        if [ "X$pid" = "X" ]
        then
            eval echo  ' WARNING: $APP_LONG_NAME may have failed to start.'
            exit 1
        else
            eval echo  ' running: PID:$pid'
        fi
    else 
        echo ""
    fi
}

macosxstart() {
    # The daemon has been installed.
    eval echo  'Starting $APP_LONG_NAME.  Detected Mac OSX and installed launchd daemon.'
    if [ `id | sed 's/^uid=//;s/(.*$//'` != "0" ] ; then       
        eval echo  'Must be root to perform this action.'
        exit 1
    fi
    
    getpid
    if [ "X$pid" != "X" ] ; then
        eval echo  '$APP_LONG_NAME is already running.'
        exit 1
    fi
    
    # If the daemon was just installed, it may not be loaded.
    LOADED_PLIST=`launchctl list | grep ${APP_PLIST_BASE}`
    if [ "X${LOADED_PLIST}" = "X" ] ; then
        launchctl load /Library/LaunchDaemons/${APP_PLIST}
    fi
    # If launchd is set to run the daemon already at Load, we don't need to call start
    getpid
    if [ "X$pid" == "X" ] ; then
        launchctl start ${APP_PLIST_BASE}
    fi
    
    startwait
}

start() {
    eval echo  'Starting $APP_LONG_NAME...'
    getpid
    if [ "X$pid" = "X" ]
    then
        # The string passed to eval must handles spaces in paths correctly.
        COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=\"$APP_NAME\" wrapper.pidfile=\"$PIDFILE\" wrapper.name=\"$APP_NAME\" wrapper.displayname=\"$APP_LONG_NAME\" wrapper.daemonize=TRUE $ANCHORPROP $IGNOREPROP $STATUSPROP $LOCKPROP"
        eval $COMMAND_LINE
    else
        eval echo  '$APP_LONG_NAME is already running.'
        exit 1
    fi
    
    startwait
}
 
stopit() {
    # $1 exit if down flag
    
    eval echo  'Stopping $APP_LONG_NAME...'
    getpid
    if [ "X$pid" = "X" ]
    then
        eval echo  '$APP_LONG_NAME was not running.'
        if [ "X$1" = "X1" ]
        then
            exit 1
        fi
    else
        if [ "X$IGNORE_SIGNALS" = "X" ]
        then
            # Running so try to stop it.
            kill $pid
            if [ $? -ne 0 ]
            then
                # An explanation for the failure should have been given
                eval echo  'Unable to stop $APP_LONG_NAME.'
                exit 1
            fi
        else
            rm -f "$ANCHORFILE"
            if [ -f "$ANCHORFILE" ]
            then
                # An explanation for the failure should have been given
                eval echo  'Unable to stop $APP_LONG_NAME.'
                exit 1
            fi
        fi

        # We can not predict how long it will take for the wrapper to
        #  actually stop as it depends on settings in wrapper.conf.
        #  Loop until it does.
        savepid=$pid
        CNT=0
        TOTCNT=0
        while [ "X$pid" != "X" ]
        do
            # Show a waiting message every 5 seconds.
            if [ "$CNT" -lt "5" ]
            then
                CNT=`expr $CNT + 1`
            else
                eval echo  'Waiting for $APP_LONG_NAME to exit...'
                CNT=0
            fi
            TOTCNT=`expr $TOTCNT + 1`

            sleep 1

            testpid
        done

        pid=$savepid
        testpid
        if [ "X$pid" != "X" ]
        then
            eval echo  'Failed to stop $APP_LONG_NAME.'
            exit 1
        else
            eval echo  'Stopped $APP_LONG_NAME.'
        fi
    fi
}

status() {
    getpid
    if [ "X$pid" = "X" ]
    then
        eval echo  '$APP_LONG_NAME is not running.'
        exit 1
    else
        if [ "X$DETAIL_STATUS" = "X" ]
        then
            eval echo  '$APP_LONG_NAME is running: PID:$pid'
        else
            getstatus
            eval echo  '$APP_LONG_NAME is running: PID:$pid, Wrapper:$STATUS, Java:$JAVASTATUS'
        fi
        exit 0
    fi
}

installdaemon() {
    if [ `id | sed 's/^uid=//;s/(.*$//'` != "0" ] ; then       
        eval echo  'Must be root to perform this action.'
        exit 1
    else
        APP_NAME_LOWER=`echo "$APP_NAME" | tr [A-Z] [a-z]`
        if [ "$DIST_OS" = "solaris" ] ; then
            eval echo  'Detected Solaris:'
            if [ -f /etc/init.d/$APP_NAME ] ; then
                eval echo  ' The $APP_LONG_NAME daemon is already installed.'
                exit 1
            else
                eval echo  ' Installing the $APP_LONG_NAME daemon..'
                ln -s "$REALPATH" "/etc/init.d/$APP_NAME"
                ln -s "/etc/init.d/$APP_NAME" "/etc/rc3.d/K20$APP_NAME_LOWER"
                ln -s "/etc/init.d/$APP_NAME" "/etc/rc3.d/S20$APP_NAME_LOWER"
            fi
        elif [ "$DIST_OS" = "linux" ] ; then
            if [ -f /etc/redhat-release -o -f /etc/redhat_version -o -f /etc/fedora-release ]  ; then
                eval echo  'Detected RHEL or Fedora:'                  
                if [ -f "/etc/init.d/$APP_NAME" ] ; then
                    eval echo  ' The $APP_LONG_NAME daemon is already installed.'
                    exit 1
                else
                    eval echo  ' Installing the $APP_LONG_NAME daemon..'
                    ln -s "$REALPATH" "/etc/init.d/$APP_NAME"
                    /sbin/chkconfig --add "$APP_NAME"
                    /sbin/chkconfig "$APP_NAME" on
                fi
            elif [ -f /etc/SuSE-release ] ; then
                eval echo  'Detected SuSE or SLES:'
                if [ -f "/etc/init.d/$APP_NAME" ] ; then
                    eval echo  ' The $APP_LONG_NAME daemon is already installed.'
                    exit 1
                else
                    eval echo  ' Installing the $APP_LONG_NAME daemon..'
                    ln -s "$REALPATH" "/etc/init.d/$APP_NAME"
                    insserv "/etc/init.d/$APP_NAME"
                fi
            elif [ -f /etc/lsb-release ] ; then
                eval echo  'Detected Ubuntu:'
                if [ -f "/etc/init.d/$APP_NAME" ] ; then
                    eval echo  ' The $APP_LONG_NAME daemon is already installed.'
                    exit 1
                else
                    eval echo  ' Installing the $APP_LONG_NAME daemon..'
                    ln -s "$REALPATH" "/etc/init.d/$APP_NAME"
                    update-rc.d "$APP_NAME" defaults
                fi
            else
                eval echo  'Detected Linux:'
                if [ -f "/etc/init.d/$APP_NAME" ] ; then
                    eval echo  ' The $APP_LONG_NAME daemon is already installed.'
                    exit 1
                else
                    eval echo  ' Installing the $APP_LONG_NAME daemon..'
                    ln -s "$REALPATH" /etc/init.d/$APP_NAME
                    ln -s "/etc/init.d/$APP_NAME" "/etc/rc3.d/K20$APP_NAME_LOWER"
                    ln -s "/etc/init.d/$APP_NAME" "/etc/rc3.d/S20$APP_NAME_LOWER"
                    ln -s "/etc/init.d/$APP_NAME" "/etc/rc5.d/S20$APP_NAME_LOWER"
                    ln -s "/etc/init.d/$APP_NAME" "/etc/rc5.d/K20$APP_NAME_LOWER"
                fi
            fi
        elif [ "$DIST_OS" = "hpux" ] ; then     
            eval echo  'Detected HP-UX:'          
            if [ -f "/sbin/init.d/$APP_NAME" ] ; then
                eval echo  ' The $APP_LONG_NAME daemon is already installed.'
                exit 1
            else
                eval echo  ' Installing the $APP_LONG_NAME daemon..'
                ln -s "$REALPATH" "/sbin/init.d/$APP_NAME"
                ln -s "/sbin/init.d/$APP_NAME" "/sbin/rc3.d/K20$APP_NAME_LOWER"
                ln -s "/sbin/init.d/$APP_NAME" "/sbin/rc3.d/S20$APP_NAME_LOWER"
            fi
        elif [ "$DIST_OS" = "aix" ] ; then
            eval echo  'Detected AIX:'
            if [ -f "/etc/rc.d/init.d/$APP_NAME" ] ; then
                eval echo  ' The $APP_LONG_NAME daemon is already installed.'
                exit 1
            else 
                eval echo  ' Installing the $APP_LONG_NAME daemon..'
                ln -s "$REALPATH" /etc/rc.d/init.d/$APP_NAME
                ln -s "/etc/rc.d/init.d/$APP_NAME" "/etc/rc.d/rc2.d/S20$APP_NAME_LOWER"
                ln -s "/etc/rc.d/init.d/$APP_NAME" "/etc/rc.d/rc2.d/K20$APP_NAME_LOWER"
            fi
        elif [ "$DIST_OS" = "freebsd" ] ; then
            eval echo  'Detected FreeBSD:'                
            if [ -f "/etc/rc.d/$APP_NAME" ] ; then
                eval echo  ' The $APP_LONG_NAME daemon is already installed.'
                exit 1
            else
                eval echo  ' Installing the $APP_LONG_NAME daemon..'
                sed -i .bak "/${APP_NAME}_enable=\"YES\"/d" /etc/rc.conf
                if [ -f "${REALDIR}/${APP_NAME}.install" ] ; then
                    ln -s "${REALDIR}/${APP_NAME}.install" "/etc/rc.d/$APP_NAME"
                else
                    echo '#!/bin/sh' > "/etc/rc.d/$APP_NAME"
                    echo "#" >> "/etc/rc.d/$APP_NAME"
                    echo "# PROVIDE: $APP_NAME" >> "/etc/rc.d/$APP_NAME"
                    echo "# REQUIRE: NETWORKING" >> "/etc/rc.d/$APP_NAME"
                    echo "# KEYWORD: shutdown" >> "/etc/rc.d/$APP_NAME"
                    echo ". /etc/rc.subr" >> "/etc/rc.d/$APP_NAME"
                    echo "name=\"$APP_NAME\"" >> "/etc/rc.d/$APP_NAME"
                    echo "rcvar=\`set_rcvar\`" >> "/etc/rc.d/$APP_NAME"
                    echo "command=\"${REALDIR}/${APP_NAME}\"" >> "/etc/rc.d/$APP_NAME"
                    echo 'start_cmd="${name}_start"' >> "/etc/rc.d/$APP_NAME"
                    echo 'load_rc_config $name' >> "/etc/rc.d/$APP_NAME"
                    echo 'status_cmd="${name}_status"' >> "/etc/rc.d/$APP_NAME"
                    echo 'stop_cmd="${name}_stop"' >> "/etc/rc.d/$APP_NAME"
                    echo "${APP_NAME}_status() {" >> "/etc/rc.d/$APP_NAME"
                    echo '${command} status' >> "/etc/rc.d/$APP_NAME"
                    echo '}' >> "/etc/rc.d/$APP_NAME"
                    echo "${APP_NAME}_stop() {" >> "/etc/rc.d/$APP_NAME"
                    echo '${command} stop' >> "/etc/rc.d/$APP_NAME"
                    echo '}' >> "/etc/rc.d/$APP_NAME"
                    echo "${APP_NAME}_start() {" >> "/etc/rc.d/$APP_NAME"
                    echo '${command} start' >> "/etc/rc.d/$APP_NAME"
                    echo '}' >> "/etc/rc.d/$APP_NAME"
                    echo 'run_rc_command "$1"' >> "/etc/rc.d/$APP_NAME"
                fi
                echo "${APP_NAME}_enable=\"YES\"" >> /etc/rc.conf
                chmod 555 "/etc/rc.d/$APP_NAME"
            fi
        elif [ "$DIST_OS" = "macosx" ] ; then
            eval echo  'Detected Mac OSX:'
            if [ -f "/Library/LaunchDaemons/${APP_PLIST}" ] ; then
                eval echo  ' The $APP_LONG_NAME daemon is already installed.'
                exit 1
            else
                eval echo  ' Installing the $APP_LONG_NAME daemon..'
                if [ -f "${REALDIR}/${APP_PLIST}" ] ; then
                    ln -s "${REALDIR}/${APP_PLIST}" "/Library/LaunchDaemons/${APP_PLIST}"
                else
                    echo "<?xml version=\"1.0\" encoding=\"UTF-8\"?>" > "/Library/LaunchDaemons/${APP_PLIST}"
                    echo "<!DOCTYPE plist PUBLIC \"-//Apple Computer//DTD PLIST 1.0//EN\"" >> "/Library/LaunchDaemons/${APP_PLIST}"
                    echo "\"http://www.apple.com/DTDs/PropertyList-1.0.dtd\">" >> "/Library/LaunchDaemons/${APP_PLIST}"
                    echo "<plist version=\"1.0\">" >> "/Library/LaunchDaemons/${APP_PLIST}"
                    echo "    <dict>" >> "/Library/LaunchDaemons/${APP_PLIST}"
                    echo "        <key>Label</key>" >> "/Library/LaunchDaemons/${APP_PLIST}"
                    echo "        <string>${APP_PLIST_BASE}</string>" >> "/Library/LaunchDaemons/${APP_PLIST}"
                    echo "        <key>ProgramArguments</key>" >> "/Library/LaunchDaemons/${APP_PLIST}"
                    echo "        <array>" >> "/Library/LaunchDaemons/${APP_PLIST}"
                    echo "            <string>${REALDIR}/${APP_NAME}</string>" >> "/Library/LaunchDaemons/${APP_PLIST}"
                    echo "            <string>launchdinternal</string>" >> "/Library/LaunchDaemons/${APP_PLIST}"
                    echo "        </array>" >> "/Library/LaunchDaemons/${APP_PLIST}"
                    echo "        <key>OnDemand</key>" >> "/Library/LaunchDaemons/${APP_PLIST}"
                    echo "        <true/>" >> "/Library/LaunchDaemons/${APP_PLIST}"
                    echo "        <key>RunAtLoad</key>" >> "/Library/LaunchDaemons/${APP_PLIST}"
                    echo "        <true/>" >> "/Library/LaunchDaemons/${APP_PLIST}"
                    if [ "X$RUN_AS_USER" != "X" ] ; then
                        echo "        <key>UserName</key>" >> "/Library/LaunchDaemons/${APP_PLIST}"
                        echo "        <string>${RUN_AS_USER}</string>" >> "/Library/LaunchDaemons/${APP_PLIST}"
                    fi
                    echo "    </dict>" >> "/Library/LaunchDaemons/${APP_PLIST}"
                    echo "</plist>" >> "/Library/LaunchDaemons/${APP_PLIST}"
                fi
                chmod 555 "/Library/LaunchDaemons/${APP_PLIST}"
            fi
        elif [ "$DIST_OS" = "zos" ] ; then
            eval echo  'Detected z/OS:'
            if [ -f /etc/rc.bak ] ; then
                eval echo  ' The $APP_LONG_NAME daemon is already installed.'
                exit 1
            else
                eval echo  ' Installing the $APP_LONG_NAME daemon..'
                cp /etc/rc /etc/rc.bak
                sed  "s:echo /etc/rc script executed, \`date\`::g" /etc/rc.bak > /etc/rc
                echo "_BPX_JOBNAME='${APP_NAME}' \"${REALDIR}/${APP_NAME}\" start" >>/etc/rc
                echo '/etc/rc script executed, `date`' >>/etc/rc
            fi
        else
            eval echo  'Install not currently supported for $DIST_OS'
            exit 1
        fi
    fi
}

removedaemon() {
    if [ `id | sed 's/^uid=//;s/(.*$//'` != "0" ] ; then       
        eval echo  'Must be root to perform this action.'
        exit 1
    else
        stopit "0"
        APP_NAME_LOWER=`echo "$APP_NAME" | tr [A-Z] [a-z]`
        if [ "$DIST_OS" = "solaris" ] ; then
            eval echo  'Detected Solaris:'
            if [ -f "/etc/init.d/$APP_NAME" ] ; then
                eval echo  ' Removing $APP_LONG_NAME daemon...'
                for i in "/etc/rc3.d/S20$APP_NAME_LOWER" "/etc/rc3.d/K20$APP_NAME_LOWER" "/etc/init.d/$APP_NAME"
                do
                    rm -f $i
                done
            else
                eval echo  ' The $APP_LONG_NAME daemon is not currently installed.'
                exit 1
            fi
        elif [ "$DIST_OS" = "linux" ] ; then
            if [ -f /etc/redhat-release -o -f /etc/redhat_version -o -f /etc/fedora-release ] ; then
                eval echo  'Detected RHEL or Fedora:'
                if [ -f "/etc/init.d/$APP_NAME" ] ; then
                    eval echo  ' Removing $APP_LONG_NAME daemon...'
                    /sbin/chkconfig "$APP_NAME" off
                    /sbin/chkconfig --del "$APP_NAME"
                    rm -f "/etc/init.d/$APP_NAME"
                else
                    eval echo  ' The $APP_LONG_NAME daemon is not currently installed.'
                    exit 1
                fi
            elif [ -f /etc/SuSE-release ] ; then
                eval echo  'Detected SuSE or SLES:'
                if [ -f "/etc/init.d/$APP_NAME" ] ; then
                    eval echo  ' Removing $APP_LONG_NAME daemon...'
                    insserv -r "/etc/init.d/$APP_NAME"
                    rm -f "/etc/init.d/$APP_NAME"
                else
                    eval echo  ' The $APP_LONG_NAME daemon is not currently installed.'
                    exit 1
                fi
            elif [ -f /etc/lsb-release ] ; then
                eval echo  'Detected Ubuntu:'
                if [ -f "/etc/init.d/$APP_NAME" ] ; then
                    eval echo  ' Removing $APP_LONG_NAME daemon...'
                    update-rc.d -f "$APP_NAME" remove
                    rm -f "/etc/init.d/$APP_NAME"
                else
                    eval echo  ' The $APP_LONG_NAME daemon is not currently installed.'
                    exit 1
                fi
            else
                eval echo  'Detected Linux:'
                if [ -f "/etc/init.d/$APP_NAME" ] ; then
                    eval echo  ' Removing $APP_LONG_NAME daemon...'
                    for i in "/etc/rc3.d/K20$APP_NAME_LOWER" "/etc/rc5.d/K20$APP_NAME_LOWER" "/etc/rc3.d/S20$APP_NAME_LOWER" "/etc/init.d/$APP_NAME" "/etc/rc5.d/S20$APP_NAME_LOWER"
                    do
                        rm -f $i
                    done
                else
                    eval echo  ' The $APP_LONG_NAME daemon is not currently installed.'
                    exit 1
                fi
            fi
        elif [ "$DIST_OS" = "hpux" ] ; then
            eval echo  'Detected HP-UX:'
            if [ -f "/sbin/init.d/$APP_NAME" ] ; then
                eval echo  ' Removing $APP_LONG_NAME daemon...'
                for i in "/sbin/rc3.d/K20$APP_NAME_LOWER" "/sbin/rc3.d/S20$APP_NAME_LOWER" "/sbin/init.d/$APP_NAME"
                do
                    rm -f $i
                done
            else
                eval echo  ' The $APP_LONG_NAME daemon is not currently installed.'
                exit 1
            fi
        elif [ "$DIST_OS" = "aix" ] ; then
            eval echo  'Detected AIX:'
            if [ -f "/etc/rc.d/init.d/$APP_NAME" ] ; then
                eval echo  ' Removing $APP_LONG_NAME daemon...'
                for i in "/etc/rc.d/rc2.d/S20$APP_NAME_LOWER" "/etc/rc.d/rc2.d/K20$APP_NAME_LOWER" "/etc/rc.d/init.d/$APP_NAME"
                do
                    rm -f $i
                done
            else
                eval echo  ' The $APP_LONG_NAME daemon is not currently installed.'
                exit 1
            fi
        elif [ "$DIST_OS" = "freebsd" ] ; then
            eval echo  'Detected FreeBSD:'
            if [ -f "/etc/rc.d/$APP_NAME" ] ; then
                eval echo  ' Removing $APP_LONG_NAME daemon...'
                for i in "/etc/rc.d/$APP_NAME"
                do
                    rm -f $i
                done
                sed -i .bak "/${APP_NAME}_enable=\"YES\"/d" /etc/rc.conf
            else
                eval echo  ' The $APP_LONG_NAME daemon is not currently installed.'
                exit 1
            fi
        elif [ "$DIST_OS" = "macosx" ] ; then
            eval echo  'Detected Mac OSX:'
            if [ -f "/Library/LaunchDaemons/${APP_PLIST}" ] ; then
                eval echo  ' Removing $APP_LONG_NAME daemon...'
                # Make sure the plist is installed
                LOADED_PLIST=`launchctl list | grep ${APP_PLIST_BASE}`
                if [ "X${LOADED_PLIST}" != "X" ] ; then
                    launchctl unload "/Library/LaunchDaemons/${APP_PLIST}"
                fi
                rm -f "/Library/LaunchDaemons/${APP_PLIST}"
            else
                eval echo  ' The $APP_LONG_NAME daemon is not currently installed.'
                exit 1
            fi
        elif [ "$DIST_OS" = "zos" ] ; then
            eval echo  'Detected z/OS:'
            if [ -f /etc/rc.bak ] ; then
                eval echo  ' Removing $APP_LONG_NAME daemon...'
                cp /etc/rc /etc/rc.bak
                sed  "s/_BPX_JOBNAME=\'APP_NAME\'.*//g" /etc/rc.bak > /etc/rc
                rm /etc/rc.bak
            else
                eval echo  ' The $APP_LONG_NAME daemon is not currently installed.'
                exit 1
            fi
        else
            eval echo  'Remove not currently supported for $DIST_OS'
            exit 1
        fi
    fi
}

dump() {
    eval echo  'Dumping $APP_LONG_NAME...'
    getpid
    if [ "X$pid" = "X" ]
    then
        eval echo  '$APP_LONG_NAME was not running.'
    else
        kill -3 $pid

        if [ $? -ne 0 ]
        then
            eval echo  'Failed to dump $APP_LONG_NAME.'
            exit 1
        else
            eval echo  'Dumped $APP_LONG_NAME.'
        fi
    fi
}

# Used by HP-UX init scripts.
startmsg() {
    getpid
    if [ "X$pid" = "X" ]
    then
        eval echo  'Starting $APP_LONG_NAME...  Wrapper:Stopped'
    else
        if [ "X$DETAIL_STATUS" = "X" ]
        then
            eval echo  'Starting $APP_LONG_NAME...  Wrapper:Running'
        else
            getstatus
            eval echo  'Starting $APP_LONG_NAME...  Wrapper:$STATUS, Java:$JAVASTATUS'
        fi
    fi
}

# Used by HP-UX init scripts.
stopmsg() {
    getpid
    if [ "X$pid" = "X" ]
    then
        eval echo  'Stopping $APP_LONG_NAME...  Wrapper:Stopped'
    else
        if [ "X$DETAIL_STATUS" = "X" ]
        then
            eval echo  'Stopping $APP_LONG_NAME...  Wrapper:Running'
        else
            getstatus
            eval echo  'Stopping $APP_LONG_NAME...  Wrapper:$STATUS, Java:$JAVASTATUS'
        fi
    fi
}

case "$1" in

    'console')
        checkUser touchlock $1
        console
        ;;

    'start')
        if [ "$DIST_OS" = "macosx" -a -f "/Library/LaunchDaemons/${APP_PLIST}" ] ; then
            macosxstart
        else
            checkUser touchlock $1
            start
        fi
        ;;

    'stop')
        checkUser "" $1
        stopit "0"
        ;;

    'restart')
        checkUser touchlock $1
        stopit "0"
        start
        ;;

    'condrestart')
        checkUser touchlock $1
        stopit "1"
        start
        ;;

    'status')
        checkUser "" $1
        status
        ;;

    'install')
        installdaemon
        ;;

    'remove')
        removedaemon
        ;;

    'dump')
        checkUser "" $1
        dump
        ;;

    'start_msg')
        # Internal command called by launchd on HP-UX.
        checkUser "" $1
        startmsg
        ;;

    'stop_msg')
        # Internal command called by launchd on HP-UX.
        checkUser "" $1
        stopmsg
        ;;

    'launchdinternal')
        # Internal command called by launchd on Max OSX.
        # We do not want to call checkUser here as it is handled in the launchd plist file.  Doing it here would confuse launchd.
        launchdinternal
        ;;

    *)
        eval MSG=`gettext 'Usage: '`
        echo "${MSG} $0 { console | start | stop | restart | condrestart | status | install | remove | dump }"
        exit 1
        ;;
esac

exit 0