// SPDX-License-Identifier: BSD-2-Clause-Patent

/*
 * shim - trivial UEFI first-stage bootloader
 *
 * Copyright Red Hat, Inc
 * Author: Matthew Garrett
 *
 * Significant portions of this code are derived from Tianocore
 * (http://tianocore.sf.net) and are Copyright 2009-2012 Intel
 * Corporation.
 */

#include "shim.h"
#if defined(ENABLE_SHIM_CERT)
#include "shim_cert.h"
#endif /* defined(ENABLE_SHIM_CERT) */

#include <stdint.h>

static EFI_SYSTEM_TABLE *systab;
static EFI_HANDLE global_image_handle;
static EFI_LOADED_IMAGE *shim_li;
static EFI_LOADED_IMAGE shim_li_bak;

list_t sbat_var;

/*
 * The vendor certificate used for validating the second stage loader
 */
extern struct {
	UINT32 vendor_authorized_size;
	UINT32 vendor_deauthorized_size;
	UINT32 vendor_authorized_offset;
	UINT32 vendor_deauthorized_offset;
} cert_table;

typedef struct {
	UINT32 MokSize;
	UINT8 *Mok;
} MokListNode;

/*
 * Check whether we're in Secure Boot and user mode
 */
BOOLEAN secure_mode (void)
{
	static int first = 1;
	if (user_insecure_mode)
		return FALSE;

	if (variable_is_secureboot() != 1) {
		if (verbose && !in_protocol && first) {
			CHAR16 *title = L"Secure boot not enabled";
			CHAR16 *message = L"Press any key to continue";
			console_countdown(title, message, 5);
		}
		first = 0;
		return FALSE;
	}

	/* If we /do/ have "SecureBoot", but /don't/ have "SetupMode",
	 * then the implementation is bad, but we assume that secure boot is
	 * enabled according to the status of "SecureBoot".  If we have both
	 * of them, then "SetupMode" may tell us additional data, and we need
	 * to consider it.
	 */
	if (variable_is_setupmode(0) == 1) {
		if (verbose && !in_protocol && first) {
			CHAR16 *title = L"Platform is in setup mode";
			CHAR16 *message = L"Press any key to continue";
			console_countdown(title, message, 5);
		}
		first = 0;
		return FALSE;
	}

	first = 0;
	return TRUE;
}

static int
should_use_fallback(EFI_HANDLE image_handle)
{
	EFI_LOADED_IMAGE *li;
	EFI_FILE_IO_INTERFACE *fio = NULL;
	EFI_FILE *vh = NULL;
	EFI_FILE *fh = NULL;
	EFI_STATUS efi_status;
	int ret = 0;

	efi_status = BS->HandleProtocol(image_handle, &EFI_LOADED_IMAGE_GUID,
	                                (void **)&li);
	if (EFI_ERROR(efi_status)) {
		perror(L"Could not get image for boot" EFI_ARCH L".efi: %r\n",
		       efi_status);
		return 0;
	}

	if (!is_removable_media_path(li))
		goto error;

	efi_status = BS->HandleProtocol(li->DeviceHandle, &FileSystemProtocol,
					(void **) &fio);
	if (EFI_ERROR(efi_status)) {
		perror(L"Could not get fio for li->DeviceHandle: %r\n",
		       efi_status);
		goto error;
	}

	efi_status = fio->OpenVolume(fio, &vh);
	if (EFI_ERROR(efi_status)) {
		perror(L"Could not open fio volume: %r\n", efi_status);
		goto error;
	}

	efi_status = vh->Open(vh, &fh, L"\\EFI\\BOOT" FALLBACK,
			      EFI_FILE_MODE_READ, 0);
	if (EFI_ERROR(efi_status)) {
		/* Do not print the error here - this is an acceptable case
		 * for removable media, where we genuinely don't want
		 * fallback.efi to exist.
		 * Print(L"Could not open \"\\EFI\\BOOT%s\": %r\n", FALLBACK,
		 *       efi_status);
		 */
		goto error;
	}

	ret = 1;
error:
	if (fh)
		fh->Close(fh);
	if (vh)
		vh->Close(vh);

	return ret;
}
/*
 * Open the second stage bootloader and read it into a buffer
 */
static EFI_STATUS load_image (EFI_LOADED_IMAGE *li, void **data,
			      int *datasize, CHAR16 *PathName)
{
	EFI_STATUS efi_status;
	EFI_HANDLE device;
	EFI_FILE_INFO *fileinfo = NULL;
	EFI_FILE_IO_INTERFACE *drive;
	EFI_FILE *root, *grub;
	UINTN buffersize = sizeof(EFI_FILE_INFO);

	device = li->DeviceHandle;

	dprint(L"attempting to load %s\n", PathName);
	/*
	 * Open the device
	 */
	efi_status = BS->HandleProtocol(device, &EFI_SIMPLE_FILE_SYSTEM_GUID,
					(void **) &drive);
	if (EFI_ERROR(efi_status)) {
		perror(L"Failed to find fs: %r\n", efi_status);
		goto error;
	}

	efi_status = drive->OpenVolume(drive, &root);
	if (EFI_ERROR(efi_status)) {
		perror(L"Failed to open fs: %r\n", efi_status);
		goto error;
	}

	/*
	 * And then open the file
	 */
	efi_status = root->Open(root, &grub, PathName, EFI_FILE_MODE_READ, 0);
	if (EFI_ERROR(efi_status)) {
		perror(L"Failed to open %s - %r\n", PathName, efi_status);
		goto error;
	}

	fileinfo = AllocatePool(buffersize);

	if (!fileinfo) {
		perror(L"Unable to allocate file info buffer\n");
		efi_status = EFI_OUT_OF_RESOURCES;
		goto error;
	}

	/*
	 * Find out how big the file is in order to allocate the storage
	 * buffer
	 */
	efi_status = grub->GetInfo(grub, &EFI_FILE_INFO_GUID, &buffersize,
				   fileinfo);
	if (efi_status == EFI_BUFFER_TOO_SMALL) {
		FreePool(fileinfo);
		fileinfo = AllocatePool(buffersize);
		if (!fileinfo) {
			perror(L"Unable to allocate file info buffer\n");
			efi_status = EFI_OUT_OF_RESOURCES;
			goto error;
		}
		efi_status = grub->GetInfo(grub, &EFI_FILE_INFO_GUID,
					   &buffersize, fileinfo);
	}

	if (EFI_ERROR(efi_status)) {
		perror(L"Unable to get file info: %r\n", efi_status);
		goto error;
	}

	buffersize = fileinfo->FileSize;
	*data = AllocatePool(buffersize);
	if (!*data) {
		perror(L"Unable to allocate file buffer\n");
		efi_status = EFI_OUT_OF_RESOURCES;
		goto error;
	}

	/*
	 * Perform the actual read
	 */
	efi_status = grub->Read(grub, &buffersize, *data);
	if (efi_status == EFI_BUFFER_TOO_SMALL) {
		FreePool(*data);
		*data = AllocatePool(buffersize);
		efi_status = grub->Read(grub, &buffersize, *data);
	}
	if (EFI_ERROR(efi_status)) {
		perror(L"Unexpected return from initial read: %r, buffersize %x\n",
		       efi_status, buffersize);
		goto error;
	}

	*datasize = buffersize;

	FreePool(fileinfo);

	return EFI_SUCCESS;
error:
	if (*data) {
		FreePool(*data);
		*data = NULL;
	}

	if (fileinfo)
		FreePool(fileinfo);
	return efi_status;
}

VOID
restore_loaded_image(VOID)
{
	if (shim_li->FilePath)
		FreePool(shim_li->FilePath);

	/*
	 * Restore our original loaded image values
	 */
	CopyMem(shim_li, &shim_li_bak, sizeof(shim_li_bak));
}

/* If gets used on static data it probably needs boundary checking */
void
str16_to_str8(CHAR16 *str16, CHAR8 **str8)
{
	int i = 0;

	while (str16[i++] != '\0');
	*str8 = (CHAR8 *)AllocatePool((i + 1) * sizeof (CHAR8));

	i = 0;
	while (str16[i] != '\0') {
		(*str8)[i] = (CHAR8)str16[i];
		i++;
	}
	(*str8)[i] = '\0';
}

/*
 * Load and run an EFI executable
 */
EFI_STATUS read_image(EFI_HANDLE image_handle, CHAR16 *ImagePath,
		      CHAR16 **PathName, void **data, int *datasize,
		      int flags)
{
	EFI_STATUS efi_status;
	void *sourcebuffer = NULL;
	UINT64 sourcesize = 0;
	CHAR8 *netbootname;

	/*
	 * We need to refer to the loaded image protocol on the running
	 * binary in order to find our path
	 */
	efi_status = BS->HandleProtocol(image_handle, &EFI_LOADED_IMAGE_GUID,
					(void **)&shim_li);
	if (EFI_ERROR(efi_status)) {
		perror(L"Unable to init protocol\n");
		return efi_status;
	}

	/*
	 * Build a new path from the existing one plus the executable name
	 */
	efi_status = generate_path_from_image_path(shim_li, ImagePath, PathName);
	if (EFI_ERROR(efi_status)) {
		perror(L"Unable to generate path %s: %r\n", ImagePath,
		       efi_status);
		return efi_status;
	}

	if (findNetboot(shim_li->DeviceHandle)) {
		str16_to_str8(ImagePath, &netbootname);
		efi_status = parseNetbootinfo(image_handle, netbootname);
		if (EFI_ERROR(efi_status)) {
			perror(L"Netboot parsing failed: %r\n", efi_status);
			return EFI_PROTOCOL_ERROR;
		}
		FreePool(netbootname);
		efi_status = FetchNetbootimage(image_handle, &sourcebuffer,
					       &sourcesize, flags);
		if (EFI_ERROR(efi_status)) {
			if (~flags & SUPPRESS_NETBOOT_OPEN_FAILURE_NOISE)
				perror(L"Unable to fetch TFTP image: %r\n",
				       efi_status);
			return efi_status;
		}
		*data = sourcebuffer;
		*datasize = sourcesize;
	} else if (find_httpboot(shim_li->DeviceHandle)) {
		str16_to_str8(ImagePath, &netbootname);
		efi_status = httpboot_fetch_buffer (image_handle,
						    &sourcebuffer,
						    &sourcesize,
						    netbootname);
		if (EFI_ERROR(efi_status)) {
			if (~flags & SUPPRESS_NETBOOT_OPEN_FAILURE_NOISE)
				perror(L"Unable to fetch HTTP image %a: %r\n",
				       netbootname, efi_status);
			return efi_status;
		}
		*data = sourcebuffer;
		*datasize = sourcesize;
	} else {
		/*
		 * Read the new executable off disk
		 */
		efi_status = load_image(shim_li, data, datasize, *PathName);
		if (EFI_ERROR(efi_status)) {
			perror(L"Failed to load image %s: %r\n",
			       *PathName, efi_status);
			PrintErrors();
			ClearErrors();
			return efi_status;
		}
	}

	if (*datasize < 0)
		efi_status = EFI_INVALID_PARAMETER;

	return efi_status;
}

/*
 * Load and run an EFI executable
 */
EFI_STATUS start_image(EFI_HANDLE image_handle, CHAR16 *ImagePath)
{
	EFI_STATUS efi_status;
	EFI_IMAGE_ENTRY_POINT entry_point;
	EFI_PHYSICAL_ADDRESS alloc_address;
	UINTN alloc_pages;
	CHAR16 *PathName = NULL;
	void *data = NULL;
	int datasize = 0;
	unsigned int alloc_alignment;

	efi_status = read_image(image_handle, ImagePath, &PathName, &data,
				&datasize, 0);
	if (EFI_ERROR(efi_status))
		goto done;

	/*
	 * We need to modify the loaded image protocol entry before running
	 * the new binary, so back it up
	 */
	CopyMem(&shim_li_bak, shim_li, sizeof(shim_li_bak));

	/*
	 * Update the loaded image with the second stage loader file path
	 */
	shim_li->FilePath = FileDevicePath(NULL, PathName);
	if (!shim_li->FilePath) {
		perror(L"Unable to update loaded image file path\n");
		efi_status = EFI_OUT_OF_RESOURCES;
		goto restore;
	}

	/*
	 * Verify and, if appropriate, relocate and execute the executable
	 */
	efi_status = handle_image(data, datasize, shim_li, image_handle,
				  &entry_point, &alloc_address, &alloc_pages,
				  &alloc_alignment, false);
	if (EFI_ERROR(efi_status)) {
		perror(L"Failed to load image: %r\n", efi_status);
		PrintErrors();
		ClearErrors();
		goto restore;
	}

#if 0
	save_logs();
#endif

	/*
	 * The binary is trusted and relocated. Run it
	 */
	efi_status = entry_point(image_handle, systab);

restore:
	restore_loaded_image();
done:
	if (PathName)
		FreePool(PathName);

	if (data)
		FreePool(data);

	return efi_status;
}

/*
 * Load and run grub. If that fails because grub isn't trusted, load and
 * run MokManager.
 */
EFI_STATUS init_grub(EFI_HANDLE image_handle)
{
	EFI_STATUS efi_status;
	int use_fb = should_use_fallback(image_handle);

	efi_status = start_image(image_handle, use_fb ? FALLBACK :second_stage);
	if (efi_status == EFI_SECURITY_VIOLATION ||
	    efi_status == EFI_ACCESS_DENIED) {
		efi_status = start_image(image_handle, MOK_MANAGER);
		if (EFI_ERROR(efi_status)) {
			console_print(L"start_image() returned %r\n", efi_status);
			usleep(2000000);
			return efi_status;
		}

		efi_status = start_image(image_handle,
					 use_fb ? FALLBACK : second_stage);
	}

	/*
	 * If the filename is invalid, or the file does not exist, just fall
	 * back to the default loader.  Also fall back to the default loader
	 * if we get a TFTP error or HTTP error.
	 */
	if (!use_fb && (efi_status == EFI_INVALID_PARAMETER ||
	                efi_status == EFI_NOT_FOUND ||
	                efi_status == EFI_HTTP_ERROR ||
	                efi_status == EFI_TFTP_ERROR)) {
		console_print(
			L"start_image() returned %r, falling back to default loader\n",
			efi_status);
		usleep(2000000);
		load_options = NULL;
		load_options_size = 0;
		efi_status = start_image(image_handle, DEFAULT_LOADER);
	}

	if (EFI_ERROR(efi_status)) {
		console_print(L"start_image() returned %r\n", efi_status);
		usleep(2000000);
	}

	return efi_status;
}

/*
 * Check the load options to specify the second stage loader
 */
EFI_STATUS set_second_stage (EFI_HANDLE image_handle)
{
	EFI_STATUS efi_status;
	EFI_LOADED_IMAGE *li = NULL;

	second_stage = (optional_second_stage) ? optional_second_stage : DEFAULT_LOADER;
	load_options = NULL;
	load_options_size = 0;

	efi_status = BS->HandleProtocol(image_handle, &LoadedImageProtocol,
					(void **) &li);
	if (EFI_ERROR(efi_status)) {
		perror (L"Failed to get load options: %r\n", efi_status);
		return efi_status;
	}

#if defined(DISABLE_REMOVABLE_LOAD_OPTIONS)
	/*
	 * boot services build very strange load options, and we might misparse them,
	 * causing boot failures on removable media.
	 */
	if (is_removable_media_path(li)) {
		dprint("Invoked from removable media path, ignoring boot options");
		return EFI_SUCCESS;
	}
#endif

	efi_status = parse_load_options(li);
	if (EFI_ERROR(efi_status)) {
		perror (L"Failed to get load options: %r\n", efi_status);
		return efi_status;
	}

	return EFI_SUCCESS;
}

static SHIM_LOCK shim_lock_interface;
static EFI_HANDLE shim_lock_handle;

EFI_STATUS
install_shim_protocols(void)
{
	SHIM_LOCK *shim_lock;
	EFI_STATUS efi_status;

	/*
	 * Did another instance of shim earlier already install the
	 * protocol? If so, get rid of it.
	 *
	 * We have to uninstall shim's protocol here, because if we're
	 * On the fallback.efi path, then our call pathway is:
	 *
	 * shim->fallback->shim->grub
	 * ^               ^      ^
	 * |               |      \- gets protocol #0
	 * |               \- installs its protocol (#1)
	 * \- installs its protocol (#0)
	 * and if we haven't removed this, then grub will get the *first*
	 * shim's protocol, but it'll get the second shim's systab
	 * replacements.  So even though it will participate and verify
	 * the kernel, the systab never finds out.
	 */
	efi_status = LibLocateProtocol(&SHIM_LOCK_GUID, (VOID **)&shim_lock);
	if (!EFI_ERROR(efi_status))
		uninstall_shim_protocols();

	init_image_loader();

	/*
	 * Install the protocol
	 */
	efi_status = BS->InstallMultipleProtocolInterfaces(&shim_lock_handle,
							   &SHIM_LOCK_GUID,
							   &shim_lock_interface,
							   &SHIM_IMAGE_LOADER_GUID,
							   &shim_image_loader_interface,
							   NULL);
	if (EFI_ERROR(efi_status)) {
		console_error(L"Could not install security protocol",
			      efi_status);
		return efi_status;
	}

	if (!secure_mode())
		return EFI_SUCCESS;

#if defined(OVERRIDE_SECURITY_POLICY)
	/*
	 * Install the security protocol hook
	 */
	security_policy_install(shim_verify);
#endif

	return EFI_SUCCESS;
}

void
uninstall_shim_protocols(void)
{
	/*
	 * If we're back here then clean everything up before exiting
	 */
	BS->UninstallMultipleProtocolInterfaces(shim_lock_handle,
						&SHIM_LOCK_GUID,
						&shim_lock_interface,
						&SHIM_IMAGE_LOADER_GUID,
						&shim_image_loader_interface,
						NULL);

	if (!secure_mode())
		return;

#if defined(OVERRIDE_SECURITY_POLICY)
	/*
	 * Clean up the security protocol hook
	 */
	security_policy_uninstall();
#endif
}

static void
check_section_helper(char *section_name, int len, void **pointer,
                     EFI_IMAGE_SECTION_HEADER *Section, void *data,
                     int datasize, size_t minsize)
{
	if (CompareMem(Section->Name, section_name, len) == 0) {
		*pointer = ImageAddress(data, datasize, Section->PointerToRawData);
		if (Section->SizeOfRawData < minsize) {
			dprint(L"found and rejected %.*a bad size\n", len, section_name);
			dprint(L"minsize: %d\n", minsize);
			dprint(L"rawsize: %d\n", Section->SizeOfRawData);
			return ;
		}
		if (!*pointer) {
			return ;
		}
		dprint(L"found %.*a\n", len, section_name);
	}
}

#define check_section(section_name, pointer, section, data, datasize, minsize) \
	check_section_helper(section_name, sizeof(section_name) - 1, pointer,  \
	                     section, data, datasize, minsize)

EFI_STATUS
load_revocations_file(EFI_HANDLE image_handle, CHAR16 *FileName, CHAR16 *PathName)
{
	EFI_STATUS efi_status = EFI_SUCCESS;
	PE_COFF_LOADER_IMAGE_CONTEXT context;
	EFI_IMAGE_SECTION_HEADER *Section;
	int datasize = 0;
	void *data = NULL;
	unsigned int i;
	char *sbat_var_automatic = NULL;
	char *sbat_var_latest = NULL;
	uint8_t *ssps_automatic = NULL;
	uint8_t *sspv_automatic = NULL;
	uint8_t *ssps_latest = NULL;
	uint8_t *sspv_latest = NULL;

	efi_status = read_image(image_handle, FileName, &PathName,
				&data, &datasize,
				SUPPRESS_NETBOOT_OPEN_FAILURE_NOISE);
	if (!EFI_ERROR(efi_status))
		efi_status = verify_image(data, datasize, shim_li, &context);

	if (EFI_ERROR(efi_status)) {
		dprint(L"revocations failed to verify\n");
		return efi_status;
	}
	dprint(L"verified revocations\n");

	Section = context.FirstSection;
	for (i = 0; i < context.NumberOfSections; i++, Section++) {
		dprint(L"checking section \"%c%c%c%c%c%c%c%c\"\n", (char *)Section->Name);
		check_section(".sbata\0\0", (void **)&sbat_var_automatic, Section,
				data, datasize, sizeof(SBAT_VAR_ORIGINAL));
		check_section(".sbatl\0\0", (void **)&sbat_var_latest, Section,
				data, datasize, sizeof(SBAT_VAR_ORIGINAL));
		check_section(".sspva\0\0", (void **)&sspv_automatic, Section,
				data, datasize, SSPVER_SIZE);
		check_section(".sspsa\0\0", (void **)&ssps_automatic, Section,
				data, datasize, SSPSIG_SIZE);
		check_section(".sspvl\0\0", (void **)&sspv_latest, Section,
				data, datasize, SSPVER_SIZE);
		check_section(".sspsl\0\0", (void **)&ssps_latest, Section,
				data, datasize, SSPSIG_SIZE);
	}

	if (sbat_var_latest && sbat_var_automatic) {
		dprint(L"attempting to update SBAT_LEVEL\n");
		efi_status = set_sbat_uefi_variable(sbat_var_automatic,
				sbat_var_latest);
	} else {
		dprint(L"no data for SBAT_LEVEL\n");
	}

	if ((sspv_automatic && ssps_automatic) || (sspv_latest && ssps_latest)) {
		dprint(L"attempting to update SkuSiPolicy\n");
		efi_status = set_ssp_uefi_variable(sspv_automatic, ssps_automatic,
				sspv_latest, ssps_latest);

	} else {
		dprint(L"no data for SkuSiPolicy\n");
	}

	FreePool(data);
	return efi_status;
}

EFI_STATUS
load_cert_file(EFI_HANDLE image_handle, CHAR16 *filename, CHAR16 *PathName,
		int flags)
{
	EFI_STATUS efi_status;
	PE_COFF_LOADER_IMAGE_CONTEXT context;
	EFI_IMAGE_SECTION_HEADER *Section;
	EFI_SIGNATURE_LIST *certlist;
	void *pointer;
	UINT32 original;
	UINT32 offset;
	int datasize = 0;
	void *data = NULL;
	int i;

	efi_status = read_image(image_handle, filename, &PathName,
				&data, &datasize, flags);
	if (EFI_ERROR(efi_status))
		return efi_status;

	efi_status = verify_image(data, datasize, shim_li, &context);
	if (EFI_ERROR(efi_status)) {
		FreePool(data);
		return efi_status;
	}

	Section = context.FirstSection;
	for (i = 0; i < context.NumberOfSections; i++, Section++) {
		UINT32 sec_size = MIN(Section->Misc.VirtualSize, Section->SizeOfRawData);

		if (CompareMem(Section->Name, ".db\0\0\0\0\0", 8) == 0) {
			offset = 0;
			while ((sec_size - offset) >= sizeof(EFI_SIGNATURE_LIST)) {
				UINT8 *tmp;

				original = user_cert_size;
				pointer = ImageAddress(data, datasize,
						   Section->PointerToRawData + offset);
				if (!pointer) {
				    break;
				}
				certlist = pointer;

				if (certlist->SignatureListSize < sizeof(EFI_SIGNATURE_LIST) ||
					checked_add(offset, certlist->SignatureListSize, &offset) ||
					offset > sec_size ||
					checked_add(user_cert_size, certlist->SignatureListSize,
						    &user_cert_size)) {
					break;
				}

				tmp = ReallocatePool(user_cert, original,
						     user_cert_size);
				if (!tmp) {
					FreePool(data);
					return EFI_OUT_OF_RESOURCES;
				}
				user_cert = tmp;

				CopyMem(user_cert + original, pointer,
				    certlist->SignatureListSize);
			}
		}
	}
	FreePool(data);
	return EFI_SUCCESS;
}

/*
 * Read additional certificates and SBAT Level requirements from files
 * (after verifying signatures)
 */
EFI_STATUS
load_unbundled_trust(EFI_HANDLE image_handle)
{
	EFI_STATUS efi_status;
	EFI_LOADED_IMAGE *li = NULL;
	CHAR16 *PathName = NULL;
	static CHAR16 FileName[] = L"shim_certificate_0.efi";
	EFI_FILE *root, *dir;
	EFI_FILE_INFO *info;
	EFI_HANDLE device;
	EFI_FILE_IO_INTERFACE *drive;
	UINTN buffersize = 0;
	void *buffer = NULL;
	BOOLEAN search_revocations = TRUE;
	int i = 0;

	efi_status = gBS->HandleProtocol(image_handle, &EFI_LOADED_IMAGE_GUID,
					 (void **)&li);
	if (EFI_ERROR(efi_status)) {
		perror(L"Unable to init protocol\n");
		return efi_status;
	}

	efi_status = generate_path_from_image_path(li, L"", &PathName);
	if (EFI_ERROR(efi_status))
		goto done;

	device = li->DeviceHandle;
	efi_status = gBS->HandleProtocol(device, &EFI_SIMPLE_FILE_SYSTEM_GUID,
					 (void **)&drive);
	if (EFI_ERROR(efi_status)) {
		dprint(L"Failed to find fs on local drive (netboot?): %r \n",
				efi_status);
		/*
		 * Network boot cases do not support reading a directory. Try
		 * to read revocations to pull in any unbundled SBATLevel
		 * updates unconditionally in those cases. This may produce
		 * console noise when the file is not present.
		 */
		load_revocations_file(image_handle, SKUSIREVOCATIONFILE, PathName);
		load_revocations_file(image_handle, SBATREVOCATIONFILE, PathName);
		while (load_cert_file(image_handle, FileName, PathName,
			SUPPRESS_NETBOOT_OPEN_FAILURE_NOISE) == EFI_SUCCESS
			&& i++ < 10) {
			FileName[17]++;
		}
		goto done;
	}

	efi_status = drive->OpenVolume(drive, &root);
	if (EFI_ERROR(efi_status)) {
		perror(L"Failed to open fs: %r\n", efi_status);
		goto done;
	}

	efi_status = root->Open(root, &dir, PathName, EFI_FILE_MODE_READ, 0);
	if (EFI_ERROR(efi_status)) {
		perror(L"Failed to open %s - %r\n", PathName, efi_status);
		goto done;
	}

	if (!secure_mode())
		goto done;


	while (true) {
		UINTN old = buffersize;

		efi_status = dir->Read(dir, &buffersize, buffer);
		if (efi_status == EFI_BUFFER_TOO_SMALL) {
			if (buffersize == old) {
				/*
				 * Some UEFI drivers or firmwares are not compliant with
				 * the EFI_FILE_PROTOCOL.Read() specs and do not return the
				 * required buffer size along with EFI_BUFFER_TOO_SMALL.
				 * Work around this by progressively increasing the buffer
				 * size, up to a certain point, until the call succeeds.
				 */
				perror(L"Error reading directory %s - non-compliant UEFI driver or firmware!\n",
						PathName);
				buffersize = (buffersize < 4) ? 4 : buffersize * 2;
				if (buffersize > 1024)
					goto done;
			}
			buffer = ReallocatePool(buffer, old, buffersize);
			if (buffer == NULL) {
				perror(L"Failed to read directory %s - %r\n",
				       PathName, EFI_OUT_OF_RESOURCES);
				goto done;
			}
			continue;
		} else if (EFI_ERROR(efi_status)) {
			perror(L"Failed to read directory %s - %r\n", PathName,
					efi_status);
			goto done;
		}

		info = (EFI_FILE_INFO *)buffer;
		if (buffersize == 0 || !info) {
			if (search_revocations) {
				search_revocations = FALSE;
				efi_status = root->Open(root, &dir, PathName,
							EFI_FILE_MODE_READ, 0);
				if (EFI_ERROR(efi_status)) {
					perror(L"Failed to open %s - %r\n",
					       PathName, efi_status);
					goto done;
				}
				continue;
			} else {
				goto done;
			}
		}

		/*
		 * In the event that there are unprocessed sbat revocation
		 * additions, they could be intended to ban any *new* trust
		 * anchors we find here. With that in mind, we always want to
		 * do a pass of loading revocations before we try to add
		 * anything new to our allowlist. This is done by making two
		 * passes over the directory, first to search for the
		 * revocations_sbat.efi file then to search for shim_certificate*.efi
		 */
		if (search_revocations &&
		    StrCaseCmp(info->FileName, SBATREVOCATIONFILE) == 0) {
			load_revocations_file(image_handle, SBATREVOCATIONFILE, PathName);
			search_revocations = FALSE;
			efi_status = root->Open(root, &dir, PathName,
						EFI_FILE_MODE_READ, 0);
			if (EFI_ERROR(efi_status)) {
				perror(L"Failed to open %s - %r\n",
				       PathName, efi_status);
				goto done;
			}
		}

		if (!search_revocations) {
			if (StrnCaseCmp(info->FileName, L"shim_certificate", 16) == 0) {
				load_cert_file(image_handle, info->FileName, PathName, 0);
			}
			if (StrCaseCmp(info->FileName, SKUSIREVOCATIONFILE) == 0) {
				load_revocations_file(image_handle,
					SKUSIREVOCATIONFILE, PathName);
			}
		}
	}
done:
	FreePool(buffer);
	FreePool(PathName);
	return efi_status;
}

/* Read optional options file */
EFI_STATUS
load_shim_options(EFI_HANDLE image_handle)
{
	EFI_STATUS efi_status;
	EFI_HANDLE device;
	EFI_LOADED_IMAGE *li = NULL;
	EFI_FILE_IO_INTERFACE *drive;
	EFI_FILE *root;
	EFI_FILE_HANDLE ofile;
	CHAR16 *PathName = NULL;
	CHAR16 *buffer;
	UINTN comma0;
	UINT64 bs;

	efi_status = gBS->HandleProtocol(image_handle, &EFI_LOADED_IMAGE_GUID,
					 (void **)&li);
	if (EFI_ERROR(efi_status)) {
		perror(L"Unable to init protocol\n");
		return efi_status;
	}

	efi_status = generate_path_from_image_path(li, L"options.csv", &PathName);
	if (EFI_ERROR(efi_status))
		goto done;

	device = li->DeviceHandle;

	efi_status = BS->HandleProtocol(device, &EFI_SIMPLE_FILE_SYSTEM_GUID,
					(void **) &drive);
	if (EFI_ERROR(efi_status))
		goto done;

	efi_status = drive->OpenVolume(drive, &root);
	if (EFI_ERROR(efi_status)) {
		perror(L"Failed to open fs: %r\n", efi_status);
		goto done;
	}

	efi_status = root->Open(root, &ofile, PathName, EFI_FILE_READ_ONLY, 0);
	if (EFI_ERROR(efi_status)) {
		if (efi_status != EFI_NOT_FOUND)
			perror(L"Failed to open %s - %r\n", PathName, efi_status);
		goto done;
	}

	dprint(L"Loading optional second stage info from options.csv\n");
	efi_status = read_file(ofile, PathName, &buffer, &bs);
	if (EFI_ERROR(efi_status)) {
		perror(L"Failed to read file\n");
		goto done;
	}

	/*
	 * This file may or may not start with the Unicode byte order marker.
	 * Since UEFI is defined as LE, this file must also be LE.
	 * If we find the LE byte order marker, just skip its.
	 */
	if (*buffer == 0xfeff)
		buffer++;

	comma0 = StrCSpn(buffer, L",");
	if (comma0 == 0) {
		perror(L"Invalid csv file\n");
		goto done;
	}

	/*
	 * Currently the options.csv file allows one entry for the optional
	 * secondary boot stage, anything afterwards is skipped.
	 */
	buffer[comma0] = L'\0';
	dprint(L"Optional 2nd stage:\"%s\"\n", buffer);
	optional_second_stage=buffer;

done:
	FreePool(PathName);
	return EFI_SUCCESS;
}

EFI_STATUS
shim_init(void)
{
	EFI_STATUS efi_status;

	dprint(L"%a", shim_version);

	/* Set the second stage loader */
	efi_status = set_second_stage(global_image_handle);
	if (EFI_ERROR(efi_status)) {
		perror(L"set_second_stage() failed: %r\n", efi_status);
		return efi_status;
	}

	if (secure_mode()) {
		if (vendor_authorized_size || vendor_deauthorized_size) {
			/*
			 * If shim includes its own certificates then ensure
			 * that anything it boots has performed some
			 * validation of the next image.
			 */
			hook_system_services(systab);
		}

	}

	hook_exit(systab);

	efi_status = install_shim_protocols();
	if (EFI_ERROR(efi_status))
		perror(L"install_shim_protocols() failed: %r\n", efi_status);

	return efi_status;
}

void
shim_fini(void)
{
	if (secure_mode())
		cleanup_sbat_var(&sbat_var);

	/*
	 * Remove our protocols
	 */
	uninstall_shim_protocols();

	if (secure_mode()) {
		if (vendor_authorized_size || vendor_deauthorized_size) {
			/*
			* Remove our hooks from system services.
			*/
			unhook_system_services();
		}
	}

	unhook_exit();

	console_fini();
}

extern EFI_STATUS
efi_main(EFI_HANDLE passed_image_handle, EFI_SYSTEM_TABLE *passed_systab);

static void
__attribute__((__optimize__("0")))
debug_hook(void)
{
	UINT8 *data = NULL;
	UINTN dataSize = 0;
	EFI_STATUS efi_status;
	register volatile UINTN x = 0;
	extern char _text, _data;

	if (x)
		return;

	efi_status = get_variable(DEBUG_VAR_NAME, &data, &dataSize,
				  SHIM_LOCK_GUID);
	if (EFI_ERROR(efi_status)) {
		return;
	}

	FreePool(data);

	console_print(L"add-symbol-file "DEBUGDIR
		      L"shim" EFI_ARCH L".efi.debug 0x%08x -s .data 0x%08x\n",
		      &_text, &_data);

	console_print(L"Pausing for debugger attachment.\n");
	console_print(L"To disable this, remove the EFI variable %s-%g .\n",
		      DEBUG_VAR_NAME, &SHIM_LOCK_GUID);
	x = 1;
	while (x++) {
		/* Make this so it can't /totally/ DoS us. */
#if defined(__x86_64__) || defined(__i386__) || defined(__i686__)
		if (x > 4294967294ULL)
			break;
#elif defined(__aarch64__)
		if (x > 1000)
			break;
#else
		if (x > 12000)
			break;
#endif
		wait_for_debug();
	}
	x = 1;
}

typedef enum {
	COLD_RESET,
	EXIT_FAILURE,
	EXIT_SUCCESS,	// keep this one last
} devel_egress_action;

void
devel_egress(devel_egress_action action UNUSED)
{
#ifdef ENABLE_SHIM_DEVEL
	char *reasons[] = {
		[COLD_RESET] = "reset",
		[EXIT_FAILURE] = "exit",
	};
	if (action == EXIT_SUCCESS)
		return;

	console_print(L"Waiting to %a...", reasons[action]);
	for (size_t sleepcount = 0; sleepcount < 10; sleepcount++) {
		console_print(L"%d...", 10 - sleepcount);
		usleep(1000000);
	}
	console_print(L"\ndoing %a\n", action);

	if (action == COLD_RESET)
		RT->ResetSystem(EfiResetCold, EFI_SECURITY_VIOLATION, 0, NULL);
#endif
}

EFI_STATUS
efi_main (EFI_HANDLE passed_image_handle, EFI_SYSTEM_TABLE *passed_systab)
{
	EFI_STATUS efi_status;
	EFI_HANDLE image_handle;

	verification_method = VERIFIED_BY_NOTHING;

	vendor_authorized_size = cert_table.vendor_authorized_size;
	vendor_authorized = (UINT8 *)&cert_table + cert_table.vendor_authorized_offset;

	vendor_deauthorized_size = cert_table.vendor_deauthorized_size;
	vendor_deauthorized = (UINT8 *)&cert_table + cert_table.vendor_deauthorized_offset;

#if defined(ENABLE_SHIM_CERT)
	build_cert_size = sizeof(shim_cert);
	build_cert = shim_cert;
#endif /* defined(ENABLE_SHIM_CERT) */

	CHAR16 *msgs[] = {
		L"import_mok_state() failed",
		L"shim_init() failed",
		L"import of SBAT data failed",
		L"SBAT self-check failed",
		SBAT_VAR_NAME L" UEFI variable setting failed", // NOLINT(bugprone-suspicious-missing-comma)
		NULL
	};
	enum {
		IMPORT_MOK_STATE,
		SHIM_INIT,
		IMPORT_SBAT,
		SBAT_SELF_CHECK,
		SET_SBAT,
	} msg = IMPORT_MOK_STATE;

	/*
	 * Set up the shim lock protocol so that grub and MokManager can
	 * call back in and use shim functions
	 */
	shim_lock_interface.Verify = shim_verify;
	shim_lock_interface.Hash = shim_hash;
	shim_lock_interface.Context = shim_read_header;

	systab = passed_systab;
	image_handle = global_image_handle = passed_image_handle;

	/*
	 * Ensure that gnu-efi functions are available
	 */
	InitializeLib(image_handle, systab);
	setup_verbosity();

	dprint(L"vendor_authorized:0x%08lx vendor_authorized_size:%lu\n",
	       vendor_authorized, vendor_authorized_size);
	dprint(L"vendor_deauthorized:0x%08lx vendor_deauthorized_size:%lu\n",
	       vendor_deauthorized, vendor_deauthorized_size);

	/*
	 * if SHIM_DEBUG is set, wait for a debugger to attach.
	 */
	debug_hook();

	get_shim_nx_capability(image_handle);

	efi_status = set_sbat_uefi_variable_internal();
	if (EFI_ERROR(efi_status) && secure_mode()) {
		perror(L"%s variable initialization failed\n", SBAT_VAR_NAME);
		msg = SET_SBAT;
		goto die;
	} else if (EFI_ERROR(efi_status)) {
		dprint(L"%s variable initialization failed: %r\n",
		       SBAT_VAR_NAME, efi_status);
	}
	efi_status = set_ssp_uefi_variable_internal();
	if (EFI_ERROR(efi_status)) {
                dprint(L"%s variable initialization failed: %r\n",
                       SSPVER_VAR_NAME, efi_status);
        }
        dprint(L"%s variable initialization done\n", SSPVER_VAR_NAME);

	if (secure_mode()) {
		char *sbat_start = (char *)&_sbat;
		char *sbat_end = (char *)&_esbat;

		INIT_LIST_HEAD(&sbat_var);
		efi_status = parse_sbat_var(&sbat_var, NULL);
		if (EFI_ERROR(efi_status)) {
			perror(L"Parsing %s variable failed: %r\n",
				SBAT_VAR_NAME, efi_status);
			msg = IMPORT_SBAT;
			goto die;
		}

		efi_status = verify_sbat_section(sbat_start, sbat_end - sbat_start - 1);
		if (EFI_ERROR(efi_status)) {
			perror(L"Verifying shim SBAT data failed: %r\n",
			       efi_status);
			msg = SBAT_SELF_CHECK;
			goto die;
		}
		dprint(L"SBAT self-check succeeded\n");
	}

	init_openssl();
	get_hsi_mem_info();
	set_shim_nx_policy();

	efi_status = load_unbundled_trust(global_image_handle);
	if (EFI_ERROR(efi_status)) {
		LogError(L"Failed to load addon certificates / sbat level\n");
	}

	/*
	 * Before we do anything else, validate our non-volatile,
	 * boot-services-only state variables are what we think they are.
	 */
	efi_status = import_mok_state(image_handle);
	if (!secure_mode() &&
	    (efi_status == EFI_INVALID_PARAMETER ||
	     efi_status == EFI_OUT_OF_RESOURCES)) {
		/*
		 * Make copy failures fatal only if secure_mode is enabled, or
		 * the error was anything else than EFI_INVALID_PARAMETER or
		 * EFI_OUT_OF_RESOURCES.
		 * There are non-secureboot firmware implementations that don't
		 * reserve enough EFI variable memory to fit the variable.
		 */
		console_print(L"Importing MOK states has failed: %s: %r\n",
			      msgs[msg], efi_status);
		console_print(L"Continuing boot since secure mode is disabled");
	} else if (EFI_ERROR(efi_status)) {
die:
		console_print(L"Something has gone seriously wrong: %s: %r\n",
			      msgs[msg], efi_status);
#if defined(ENABLE_SHIM_DEVEL)
		devel_egress(COLD_RESET);
#else
		usleep(5000000);
		RT->ResetSystem(EfiResetShutdown, EFI_SECURITY_VIOLATION,
				0, NULL);
#endif
	}

	/*
	 * This variable is supposed to be set by second stages, so ensure it is
	 * not set when we are starting up.
	 */
	(void) del_variable(SHIM_RETAIN_PROTOCOL_VAR_NAME, SHIM_LOCK_GUID);

	load_shim_options(image_handle);

	efi_status = shim_init();
	if (EFI_ERROR(efi_status)) {
		msg = SHIM_INIT;
		goto die;
	}

	/*
	 * Tell the user that we're in insecure mode if necessary
	 */
	if (user_insecure_mode) {
		console_print(L"Booting in insecure mode\n");
		usleep(2000000);
	}

	/*
	 * Hand over control to the second stage bootloader
	 */
	efi_status = init_grub(image_handle);

	shim_fini();
	devel_egress(EFI_ERROR(efi_status) ? EXIT_FAILURE : EXIT_SUCCESS);
	return efi_status;
}