/*  Part of SWI-Prolog interface to Qt

    Author:        Carlo Capelli
    E-mail:        cc.carlo.cap@gmail.com
    Copyright (c)  2013, Carlo Capelli
    All rights reserved.

    Redistribution and use in source and binary forms, with or without
    modification, are permitted provided that the following conditions
    are met:

    1. Redistributions of source code must retain the above copyright
       notice, this list of conditions and the following disclaimer.

    2. Redistributions in binary form must reproduce the above copyright
       notice, this list of conditions and the following disclaimer in
       the documentation and/or other materials provided with the
       distribution.

    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
    "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
    LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
    FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
    COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
    INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
    BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
    CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
    LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
    ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
    POSSIBILITY OF SUCH DAMAGE.
*/

#include "SwiPrologEngine.h"
#include "PREDICATE.h"

#include "ConsoleEdit.h"
#include "do_events.h"

#include <QtDebug>
#include <QApplication>
#include <signal.h>
#include <QTimer>

/** singleton handling - process main engine
 */
SwiPrologEngine *SwiPrologEngine::spe;

/** enforce singleton handling
 */
SwiPrologEngine::SwiPrologEngine(ConsoleEdit *target, QObject *parent)
    : QThread(parent),
      FlushOutputEvents(target),
      argc(-1)
{
    Q_ASSERT(spe == 0);
    spe = this;
}

/** enforce proper termination sequence
 */
SwiPrologEngine::~SwiPrologEngine() {
    Q_ASSERT(spe == 0);
}

/** check stream property
 */
bool SwiPrologEngine::is_tty(const FlushOutputEvents *f) { Q_UNUSED(f)
 // qDebug() << CVP(Suser_input) << "tty" << (PL_ttymode(Suser_input) == PL_RAWTTY);
    return PL_ttymode(Suser_input) == PL_RAWTTY;
}

/** background thread setup
 */
void SwiPrologEngine::start(int argc, char **argv) {
    this->argv = new char*[this->argc = argc];
    for (int a = 0; a < argc; ++a)
	strcpy(this->argv[a] = new char[strlen(argv[a]) + 1], argv[a]);
    QThread::start();
}

/** from console front end: user - or a equivalent actor - has input s
 */
void SwiPrologEngine::user_input(QString s) {
    QMutexLocker lk(&sync);
    buffer = s.toUtf8();
}

/** fill the buffer
 */
ssize_t SwiPrologEngine::_read_(void *handle, char *buf, size_t bufsize) {
    Q_UNUSED(handle);
    Q_ASSERT(spe);
    return spe->_read_(buf, bufsize);
}

/** background read & query loop
 */
ssize_t SwiPrologEngine::_read_(char *buf, size_t bufsize) {

    if ( buffer.isEmpty() )
	emit user_prompt(PL_thread_self(), is_tty(this));

    for ( ; ; ) {

	{   QMutexLocker lk(&sync);

	    if (!spe) // terminated
		return 0;

	    if (!queries.empty())
		serve_query(queries.takeFirst());

	    uint n = buffer.length();
	    if (n > 0) {
		uint l = bufsize < n ? bufsize : n;
		memcpy(buf, buffer, l);
		buffer.remove(0, l);
		return l;
	    }

	    if (target->status == ConsoleEdit::eof) {
		target->status = ConsoleEdit::running;
		return 0;
	    }
	}

	if (PL_handle_signals() < 0)
	    return -1;

	msleep(100);
    }
}

/** async query interface served from same thread
 */
void SwiPrologEngine::serve_query(query p) {
    Q_ASSERT(!p.is_script);
    QString n = p.name, t = p.text;
    try {
	if (n.isEmpty()) {
	    PlQuery q("call", PlTermv(PlCompound(std::string(t.toUtf8()), PlEncoding::UTF8)));
	    //PlQuery q("call", PlTermv(PlCompound(t.toStdWString().data())));
	    int occurrences = 0;
	    while (q.next_solution())
		emit query_result(t, ++occurrences);
	    emit query_complete(t, occurrences);
	}
	else {
	    PlQuery q(A(n).as_string(), "call", PlTermv(PlCompound(std::string(t.toUtf8()), PlEncoding::UTF8)));
	    //PlQuery q(A(n), "call", PlTermv(PlCompound(t.toStdWString().data())));
	    int occurrences = 0;
	    while (q.next_solution())
		emit query_result(t, ++occurrences);
	    emit query_complete(t, occurrences);
	}
    }
    catch(const PlException& ex) {
	qDebug() << t << CCP(ex);
	emit query_exception(n, CCP(ex));
    }
}

/** empty the buffer
 */
ssize_t SwiPrologEngine::_write_(void *handle, char *buf, size_t bufsize) {
    Q_UNUSED(handle);
    if (spe) {   // not terminated?
	emit spe->user_output(QString::fromUtf8(buf, bufsize));
	if (spe->target->status == ConsoleEdit::running)
	    spe->flush();
    }
    return bufsize;
}

/* - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
The role of this function is to stop  changing the encoding of the plwin
output. We must return -1 for  SIO_SETENCODING   for  this. As we do not
implement any of the other control operations   we  simply return -1 for
all commands we may be requested to handle.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */

int SwiPrologEngine::_control_(void *handle, int cmd, void *closure)
{ Q_UNUSED(handle);
  Q_UNUSED(cmd);
  Q_UNUSED(closure);
  return -1;
}


int SwiPrologEngine::halt_engine(int status, void*data)
{ Q_UNUSED(data);

  qDebug() << "halt_engine" << status;
  QCoreApplication::quit();
  msleep(5000);

  return 0;
}


static IOFUNCTIONS pq_functions;

void SwiPrologEngine::run() {
    pq_functions         = *Sinput->functions;
    pq_functions.read    = _read_;
    pq_functions.write	 = _write_;
 // pq_functions.close   = _close_; /* JW: might be needed.  See pl-ntmain.c */
    pq_functions.control = _control_;

    Sinput->functions  = &pq_functions;
    Soutput->functions = &pq_functions;
    Serror->functions  = &pq_functions;

    Sinput->flags  |= SIO_ISATTY;
    Soutput->flags |= SIO_ISATTY;
    Serror->flags  |= SIO_ISATTY;

    Sinput->encoding  = ENC_UTF8; /* is this correct? */
    Soutput->encoding = ENC_UTF8;
    Serror->encoding  = ENC_UTF8;

    Sinput->flags  &= ~SIO_FILE;
    Soutput->flags &= ~SIO_FILE;
    Serror->flags  &= ~SIO_FILE;

    Sinput->fileno  = -1;
    Soutput->fileno = -1;
    Serror->fileno  = -1;

    PL_set_prolog_flag("console_menu", PL_BOOL|FF_READONLY, TRUE);
    PL_set_prolog_flag("console_menu_version", PL_ATOM|FF_READONLY, "qt");
    PL_set_prolog_flag("xpce_threaded", PL_BOOL, TRUE);
    PL_set_prolog_flag("readline", PL_ATOM|FF_READONLY, "swipl_win");

    // force usage of fixed ANSI ESC sequence for help console output
    PL_set_prolog_flag("help_pager", PL_BOOL, FALSE);

    target->add_thread(1);
    PL_exit_hook(halt_engine, NULL);

    PL_initialise(argc, argv);

    // use as initialized flag
    argc = 0;

    /*
    PL_toplevel();
    // keep arguments valid while running
    for (int a = 0; a < argc; ++a)
	delete [] argv[a];
    delete [] argv;

    spe = 0;
    */

    {   PlTerm_var color_term;
	if (PlCall("current_prolog_flag", PlTermv(PlTerm_atom("color_term"), color_term)) &&
	      color_term.as_string() == "false")
	    target->color_term = false;
    }

    for ( ; ; ) {
	int status = PL_toplevel() ? 0 : 1;
	qDebug() << "PL_halt" << status;
	PL_halt(status);
    }
}

/** push an unnamed query, thus unlocking the execution polling loop
 */
void SwiPrologEngine::query_run(QString text) {
    QMutexLocker lk(&sync);
    queries.append(query {false, "", text});
}

/** push a named query, thus unlocking the execution polling loop
 */
void SwiPrologEngine::query_run(QString module, QString text) {
    QMutexLocker lk(&sync);
    queries.append(query {false, module, text});
}

/** allows to run a delayed script from resource at startup
 */
void SwiPrologEngine::script_run(QString name, QString text) {
    queries.append(query {true, name, text});
    QTimer::singleShot(100, this, SLOT(awake()));
}
void SwiPrologEngine::awake() {
    Q_ASSERT(queries.count() == 1);
    query p = queries.takeFirst();
    Q_ASSERT(!p.name.isEmpty());
    in_thread I;
    if (!I.named_load(p.name, p.text))
	qDebug() << "awake failed";
}

/** Create a Prolog thread for the GUI thread, so we can call Prolog
    goals.  These engines are created to deal with call-backs from the
    gui and destroyed after the callback has finished. This is used only
    if the thread associated to the current tab is not running a query.
 */
SwiPrologEngine::in_thread::in_thread()
    : frame(0)
{
    PL_thread_attr_t attr;

    while (!spe)
	msleep(100);
    while (!spe->isRunning())
	msleep(100);
    while (spe->argc)
	msleep(100);

    memset(&attr, 0, sizeof(attr));
    attr.flags = PL_THREAD_NO_DEBUG;
    attr.alias = (char*)"__gui";

    int id = PL_thread_attach_engine(&attr);
    Q_ASSERT(id >= 0);			/* JW: Should throw exception */
    frame = new PlFrame;
}

SwiPrologEngine::in_thread::~in_thread() {
    delete frame;
    PL_thread_destroy_engine();
}

/** run script <t>, named <n> in current thread
 */
bool SwiPrologEngine::in_thread::named_load(QString n, QString t, bool silent) {
    try {
	PlTerm_var cs, s, opts;
	if (    PlCall("atom_codes", PlTermv(PlTerm_atom(A(t)), cs)) &&
		PlCall("open_chars_stream", PlTermv(cs, s))) {
	    PlTerm_tail l(opts);
	    PlCheckFail(l.append(PlCompound("stream", PlTermv(s))));
	    if (silent)
		PlCheckFail(l.append(PlCompound("silent", PlTermv(A("true")))));
	    PlCheckFail(l.close());
	    bool rc = PlCall("load_files", PlTermv(PlTerm_atom(A(n)), opts));
	    PlCall("close", PlTermv(s));
	    return rc;
	}
    }
    catch(const PlException& ex) {
	qDebug() << CCP(ex);
    }
    return false;
}

/** handle application quit request in thread that started PL_toplevel
 *  logic moved here from pqMainWindow
 */
bool SwiPrologEngine::quit_request() {
    qDebug() << "quit_request; spe = " << spe;
    /*
    if (spe)
	spe->query_run("halt");
    else
	PL_halt(0);
    return false;
    */
    return true;
}