[manpage_begin math::bigfloat n 2.0.1]
[keywords computations]
[keywords floating-point]
[keywords interval]
[keywords math]
[keywords multiprecision]
[keywords tcl]
[copyright {2004-2008, by Stephane Arnold <stephanearnold at yahoo dot fr>}]
[moddesc   {Tcl Math Library}]
[titledesc {Arbitrary precision floating-point numbers}]
[category  Mathematics]
[require Tcl 8.5]
[require math::bigfloat [opt 2.0.1]]

[description]

The bigfloat package provides arbitrary precision floating-point math
capabilities to the Tcl language. It is designed to work with Tcl 8.5,
but for Tcl 8.4 is provided an earlier version of this package.
See [sectref "WHAT ABOUT TCL 8.4 ?"] for more explanations.
By convention, we will talk about the numbers treated in this library as :
[list_begin itemized]
[item]BigFloat for floating-point numbers of arbitrary length.
[item]integers for arbitrary length signed integers, just as basic integers since Tcl 8.5.
[list_end]
Each BigFloat is an interval, namely [lb][emph "m-d, m+d"][rb],
where [emph m] is the mantissa and [emph d] the uncertainty, representing the
limitation of that number's precision.
This is why we call such mathematics [emph "interval computations"].
Just take an example in physics : when you measure a temperature, not all
digits you read are [emph significant]. Sometimes you just cannot trust all digits - not to mention if doubles (f.p. numbers) can handle all these digits.
BigFloat can handle this problem - trusting the digits you get - plus the ability to store numbers with an arbitrary precision.

BigFloats are internally represented at Tcl lists: this
package provides a set of procedures operating against
the internal representation in order to :
[list_begin itemized]
[item]
perform math operations on BigFloats and (optionnaly) with integers.

[item]
convert BigFloats from their internal representations to strings, and vice versa.

[list_end]

[section "INTRODUCTION"]
[list_begin definitions]

[call [cmd fromstr] [arg number] [opt [arg trailingZeros]]]
Converts [emph number] into a BigFloat. Its precision
is at least the number of digits provided by [emph number].
If the [arg number] contains only digits and eventually a minus sign, it is considered as
an integer. Subsequently, no conversion is done at all.
[para]
[arg trailingZeros] - the number of zeros to append at the end of the floating-point number
to get more precision. It cannot be applied to an integer.

[example_begin]
# x and y are BigFloats : the first string contained a dot, and the second an e sign
set x [lb]fromstr -1.000000[rb]
set y [lb]fromstr 2000e30[rb]
# let's see how we get integers
set t 20000000000000
# the old way (package 1.2) is still supported for backwards compatibility :
set m [lb]fromstr 10000000000[rb]
# but we do not need fromstr for integers anymore
set n -39
# t, m and n are integers
[example_end]
[para]
The [emph number]'s last digit is considered by the procedure to be true at +/-1,
For example, 1.00 is the interval [lb]0.99, 1.01[rb],
and 0.43 the interval [lb]0.42, 0.44[rb].
The Pi constant may be approximated by the number "3.1415".
This string could be considered as the interval [lb]3.1414 , 3.1416[rb] by [cmd fromstr].
So, when you mean 1.0 as a double, you may have to write 1.000000 to get enough precision.
To learn more about this subject, see [sectref PRECISION].
[para]
For example :
[example_begin]
set x [lb]fromstr 1.0000000000[rb]
# the next line does the same, but smarter
set y [lb]fromstr 1. 10[rb]
[example_end]

[call [cmd tostr] [opt [option -nosci]] [arg number]]
Returns a string form of a BigFloat, in which all digits are exacts.
[emph "All exact digits"] means a rounding may occur, for example to zero,
if the uncertainty interval does not clearly show the true digits.
[emph number] may be an integer, causing the command to return exactly the input argument.
With the [option -nosci] option, the number returned is never shown in scientific
notation, i.e. not like '3.4523e+5' but like '345230.'.
[example_begin]
puts [lb]tostr [lb]fromstr 0.99999[rb][rb] ;# 1.0000
puts [lb]tostr [lb]fromstr 1.00001[rb][rb] ;# 1.0000
puts [lb]tostr [lb]fromstr 0.002[rb][rb] ;# 0.e-2
[example_end]
See [sectref PRECISION] for that matter.

See also [cmd iszero] for how to detect zeros, which is useful when performing a division.

[call [cmd fromdouble] [arg double] [opt [arg decimals]]]

Converts a double (a simple floating-point value) to a BigFloat, with
exactly [arg decimals] digits.  Without the [arg decimals] argument,
it behaves like [cmd fromstr].
Here, the only important feature you might care of is the ability
to create BigFloats with a fixed number of [arg decimals].

[example_begin]
tostr [lb]fromstr 1.111 4[rb]
# returns : 1.111000 (3 zeros)
tostr [lb]fromdouble 1.111 4[rb]
# returns : 1.111
[example_end]

[call [cmd todouble] [arg number]]
Returns a double, that may be used in [emph expr],
from a BigFloat.

[call [cmd isInt] [arg number]]
Returns 1 if [emph number] is an integer, 0 otherwise.

[call [cmd isFloat] [arg number]]
Returns 1 if [emph number] is a BigFloat, 0 otherwise.

[call [cmd int2float] [arg integer] [opt [arg decimals]]]
Converts an integer to a BigFloat with [emph decimals] trailing zeros.
The default, and minimal, number of [emph decimals] is 1.
When converting back to string, one decimal is lost:
[example_begin]
set n 10
set x [lb]int2float $n[rb]; # like fromstr 10.0
puts [lb]tostr $x[rb]; # prints "10."
set x [lb]int2float $n 3[rb]; # like fromstr 10.000
puts [lb]tostr $x[rb]; # prints "10.00"
[example_end]

[list_end]

[section "ARITHMETICS"]
[list_begin definitions]

[call [cmd add] [arg x] [arg y]]
[call [cmd sub] [arg x] [arg y]]
[call [cmd mul] [arg x] [arg y]]
Return the sum, difference and product of [emph x] by [emph y].
[arg x] - may be either a BigFloat or an integer
[arg y] - may be either a BigFloat or an integer
When both are integers, these commands behave like [cmd expr].

[call [cmd div] [arg x] [arg y]]
[call [cmd mod] [arg x] [arg y]]
Return the quotient and the rest of [emph x] divided by [emph y].
Each argument ([emph x] and [emph y]) can be either a BigFloat or an integer,
but you cannot divide an integer by a BigFloat
Divide by zero throws an error.

[call [cmd abs] [arg x]]
Returns the absolute value of [emph x]

[call [cmd opp] [arg x]]
Returns the opposite of [emph x]

[call [cmd pow] [arg x] [arg n]]
Returns [emph x] taken to the [emph n]th power.
It only works if [emph n] is an integer.
[emph x] might be a BigFloat or an integer.

[list_end]

[section COMPARISONS]
[list_begin definitions]
[call [cmd iszero] [arg x]]

Returns 1 if [emph x] is :
[list_begin itemized]
[item]a BigFloat close enough to zero to raise "divide by zero".
[item]the integer 0.
[list_end]
See here how numbers that are close to zero are converted to strings:
[example_begin]
tostr [lb]fromstr 0.001[rb] ; # -> 0.e-2
tostr [lb]fromstr 0.000000[rb] ; # -> 0.e-5
tostr [lb]fromstr -0.000001[rb] ; # -> 0.e-5
tostr [lb]fromstr 0.0[rb] ; # -> 0.
tostr [lb]fromstr 0.002[rb] ; # -> 0.e-2

set a [lb]fromstr 0.002[rb] ; # uncertainty interval : 0.001, 0.003
tostr  $a ; # 0.e-2
iszero $a ; # false

set a [lb]fromstr 0.001[rb] ; # uncertainty interval : 0.000, 0.002
tostr  $a ; # 0.e-2
iszero $a ; # true
[example_end]

[call  [cmd equal] [arg x] [arg y]]

Returns 1 if [emph x] and [emph y] are equal, 0 elsewhere.

[call [cmd compare] [arg x] [arg y]]

Returns 0 if both BigFloat arguments are equal,
1 if [emph x] is greater than [emph y],
and -1 if [emph x] is lower than [emph y].
You would not be able to compare an integer to a BigFloat :
the operands should be both BigFloats, or both integers.

[list_end]

[section ANALYSIS]
[list_begin definitions]
[call [cmd sqrt] [arg x]]
[call [cmd log] [arg x]]
[call [cmd exp] [arg x]]
[call [cmd cos] [arg x]]
[call [cmd sin] [arg x]]
[call [cmd tan] [arg x]]
[call [cmd cotan] [arg x]]
[call [cmd acos] [arg x]]
[call [cmd asin] [arg x]]
[call [cmd atan] [arg x]]
[call [cmd cosh] [arg x]]
[call [cmd sinh] [arg x]]
[call [cmd tanh] [arg x]]

The above functions return, respectively, the following :
square root, logarithm, exponential, cosine, sine,
tangent, cotangent, arc cosine, arc sine, arc tangent, hyperbolic
cosine, hyperbolic sine, hyperbolic tangent, of a BigFloat named [emph x].

[call [cmd pi] [arg n]]
Returns a BigFloat representing the Pi constant with [emph n] digits after the dot.
[emph n] is a positive integer.

[call [cmd rad2deg] [arg radians]]
[call [cmd deg2rad] [arg degrees]]
[arg radians] - angle expressed in radians (BigFloat)
[para]
[arg degrees] - angle expressed in degrees (BigFloat)
[para]
Convert an angle from radians to degrees, and [emph "vice versa"].

[list_end]

[section ROUNDING]
[list_begin definitions]
[call [cmd round] [arg x]]
[call [cmd ceil] [arg x]]
[call [cmd floor] [arg x]]

The above functions return the [emph x] BigFloat,
rounded like with the same mathematical function in [emph expr],
and returns it as an integer.
[list_end]

[section PRECISION]

How do conversions work with precision ?

[list_begin itemized]
[item] When a BigFloat is converted from string, the internal representation
holds its uncertainty as 1 at the level of the last digit.
[item] During computations, the uncertainty of each result
is internally computed the closest to the reality, thus saving the memory used.
[item] When converting back to string, the digits that are printed
are not subject to uncertainty. However, some rounding is done, as not doing so
causes severe problems.
[list_end]
Uncertainties are kept in the internal representation of the number ;
it is recommended to use [cmd tostr] only for outputting data (on the screen or in a file),
and NEVER call [cmd fromstr] with the result of [cmd tostr].
It is better to always keep operands in their internal representation.
Due to the internals of this library, the uncertainty interval may be slightly
wider than expected, but this should not cause false digits.
[para]

Now you may ask this question : What precision am I going to get
after calling add, sub, mul or div?
First you set a number from the string representation and,
by the way, its uncertainty is set:
[example_begin]
set a [lb]fromstr 1.230[rb]
# $a belongs to [lb]1.229, 1.231[rb]
set a [lb]fromstr 1.000[rb]
# $a belongs to [lb]0.999, 1.001[rb]
# $a has a relative uncertainty of 0.1% : 0.001(the uncertainty)/1.000(the medium value)
[example_end]
The uncertainty of the sum, or the difference, of two numbers, is the sum
of their respective uncertainties.

[example_begin]
set a [lb]fromstr 1.230[rb]
set b [lb]fromstr 2.340[rb]
set sum [lb]add $a $b[rb][rb]
# the result is : [lb]3.568, 3.572[rb] (the last digit is known with an uncertainty of 2)
tostr $sum ; # 3.57
[example_end]
But when, for example, we add or substract an integer to a BigFloat,
the relative uncertainty of the result is unchanged. So it is desirable
not to convert integers to BigFloats:

[example_begin]
set a [lb]fromstr 0.999999999[rb]
# now something dangerous
set b [lb]fromstr 2.000[rb]
# the result has only 3 digits
tostr [lb]add $a $b[rb]

# how to keep precision at its maximum
puts [lb]tostr [lb]add $a 2[rb][rb]
[example_end]
[para]

For multiplication and division, the relative uncertainties of the product
or the quotient, is the sum of the relative uncertainties of the operands.
Take care of division by zero : check each divider with [cmd iszero].

[example_begin]
set num [lb]fromstr 4.00[rb]
set denom [lb]fromstr 0.01[rb]

puts [lb]iszero $denom[rb];# true
set quotient [lb]div $num $denom[rb];# error : divide by zero

# opposites of our operands
puts [lb]compare $num [lb]opp $num[rb][rb]; # 1
puts [lb]compare $denom [lb]opp $denom[rb][rb]; # 0 !!!
# No suprise ! 0 and its opposite are the same...
[example_end]

Effects of the precision of a number considered equal to zero
to the cos function:
[example_begin]
puts [lb]tostr [lb]cos [lb]fromstr 0. 10[rb][rb][rb]; # -> 1.000000000
puts [lb]tostr [lb]cos [lb]fromstr 0. 5[rb][rb][rb]; # -> 1.0000
puts [lb]tostr [lb]cos [lb]fromstr 0e-10[rb][rb][rb]; # -> 1.000000000
puts [lb]tostr [lb]cos [lb]fromstr 1e-10[rb][rb][rb]; # -> 1.000000000
[example_end]

BigFloats with different internal representations may be converted
to the same string.

[para]

For most analysis functions (cosine, square root, logarithm, etc.), determining the precision
of the result is difficult.
It seems however that in many cases, the loss of precision in the result
is of one or two digits.
There are some exceptions : for example,
[example_begin]
tostr [lb]exp [lb]fromstr 100.0 10[rb][rb]
# returns : 2.688117142e+43 which has only 10 digits of precision, although the entry
# has 14 digits of precision.
[example_end]

[section "WHAT ABOUT TCL 8.4 ?"]
If your setup do not provide Tcl 8.5 but supports 8.4, the package can still be loaded,
switching back to [emph math::bigfloat] 1.2. Indeed, an important function introduced in Tcl 8.5
is required - the ability to handle bignums, that we can do with [cmd expr].
Before 8.5, this ability was provided by several packages,
including the pure-Tcl [emph math::bignum] package provided by [emph tcllib].
In this case, all you need to know, is that arguments to the commands explained here,
are expected to be in their internal representation.
So even with integers, you will need to call [cmd fromstr]
and [cmd tostr] in order to convert them between string and internal representations.
[example_begin]
#
# with Tcl 8.5
# ============
set a [lb]pi 20[rb]
# round returns an integer and 'everything is a string' applies to integers
# whatever big they are
puts [lb]round [lb]mul $a 10000000000[rb][rb]
#
# the same with Tcl 8.4
# =====================
set a [lb]pi 20[rb]
# bignums (arbitrary length integers) need a conversion hook
set b [lb]fromstr 10000000000[rb]
# round returns a bignum:
# before printing it, we need to convert it with 'tostr'
puts [lb]tostr [lb]round [lb]mul $a $b[rb][rb][rb]
[example_end]
[section "NAMESPACES AND OTHER PACKAGES"]
We have not yet discussed about namespaces
because we assumed that you had imported public commands into the global namespace,
like this:
[example_begin]
namespace import ::math::bigfloat::*
[example_end]
If you matter much about avoiding names conflicts,
I considere it should be resolved by the following :
[example_begin]
package require math::bigfloat
# beware: namespace ensembles are not available in Tcl 8.4
namespace eval ::math::bigfloat {namespace ensemble create -command ::bigfloat}
# from now, the bigfloat command takes as subcommands all original math::bigfloat::* commands
set a [lb]bigfloat sub [lb]bigfloat fromstr 2.000[rb] [lb]bigfloat fromstr 0.530[rb][rb]
puts [lb]bigfloat tostr $a[rb]
[example_end]
[section "EXAMPLES"]
Guess what happens when you are doing some astronomy. Here is an example :
[example_begin]
# convert acurrate angles with a millisecond-rated accuracy
proc degree-angle {degrees minutes seconds milliseconds} {
    set result 0
    set div 1
    foreach factor {1 1000 60 60} var [lb]list $milliseconds $seconds $minutes $degrees[rb] {
        # we convert each entry var into milliseconds
        set div [lb]expr {$div*$factor}[rb]
        incr result [lb]expr {$var*$div}[rb]
    }
    return [lb]div [lb]int2float $result[rb] $div[rb]
}
# load the package
package require math::bigfloat
namespace import ::math::bigfloat::*
# work with angles : a standard formula for navigation (taking bearings)
set angle1 [lb]deg2rad [lb]degree-angle 20 30 40   0[rb][rb]
set angle2 [lb]deg2rad [lb]degree-angle 21  0 50 500[rb][rb]
set opposite3 [lb]deg2rad [lb]degree-angle 51  0 50 500[rb][rb]
set sinProduct [lb]mul [lb]sin $angle1[rb] [lb]sin $angle2[rb][rb]
set cosProduct [lb]mul [lb]cos $angle1[rb] [lb]cos $angle2[rb][rb]
set angle3 [lb]asin [lb]add [lb]mul $sinProduct [lb]cos $opposite3[rb][rb] $cosProduct[rb][rb]
puts "angle3 : [lb]tostr [lb]rad2deg $angle3[rb][rb]"
[example_end]

[vset CATEGORY {math :: bignum :: float}]
[include ../common-text/feedback.inc]
[manpage_end]