'\"
'\" Generated from file 'rcs\&.man' by tcllib/doctools with format 'nroff'
'\" Copyright (c) 2005, Andreas Kupries <andreas_kupries@users\&.sourceforge\&.net>
'\" Copyright (c) 2005, Colin McCormack <coldstore@users\&.sourceforge\&.net>
'\"
.TH "rcs" n 0\&.2 tcllib "RCS low level utilities"
.\" The -*- nroff -*- definitions below are for supplemental macros used
.\" in Tcl/Tk manual entries.
.\"
.\" .AP type name in/out ?indent?
.\"	Start paragraph describing an argument to a library procedure.
.\"	type is type of argument (int, etc.), in/out is either "in", "out",
.\"	or "in/out" to describe whether procedure reads or modifies arg,
.\"	and indent is equivalent to second arg of .IP (shouldn't ever be
.\"	needed;  use .AS below instead)
.\"
.\" .AS ?type? ?name?
.\"	Give maximum sizes of arguments for setting tab stops.  Type and
.\"	name are examples of largest possible arguments that will be passed
.\"	to .AP later.  If args are omitted, default tab stops are used.
.\"
.\" .BS
.\"	Start box enclosure.  From here until next .BE, everything will be
.\"	enclosed in one large box.
.\"
.\" .BE
.\"	End of box enclosure.
.\"
.\" .CS
.\"	Begin code excerpt.
.\"
.\" .CE
.\"	End code excerpt.
.\"
.\" .VS ?version? ?br?
.\"	Begin vertical sidebar, for use in marking newly-changed parts
.\"	of man pages.  The first argument is ignored and used for recording
.\"	the version when the .VS was added, so that the sidebars can be
.\"	found and removed when they reach a certain age.  If another argument
.\"	is present, then a line break is forced before starting the sidebar.
.\"
.\" .VE
.\"	End of vertical sidebar.
.\"
.\" .DS
.\"	Begin an indented unfilled display.
.\"
.\" .DE
.\"	End of indented unfilled display.
.\"
.\" .SO ?manpage?
.\"	Start of list of standard options for a Tk widget. The manpage
.\"	argument defines where to look up the standard options; if
.\"	omitted, defaults to "options". The options follow on successive
.\"	lines, in three columns separated by tabs.
.\"
.\" .SE
.\"	End of list of standard options for a Tk widget.
.\"
.\" .OP cmdName dbName dbClass
.\"	Start of description of a specific option.  cmdName gives the
.\"	option's name as specified in the class command, dbName gives
.\"	the option's name in the option database, and dbClass gives
.\"	the option's class in the option database.
.\"
.\" .UL arg1 arg2
.\"	Print arg1 underlined, then print arg2 normally.
.\"
.\" .QW arg1 ?arg2?
.\"	Print arg1 in quotes, then arg2 normally (for trailing punctuation).
.\"
.\" .PQ arg1 ?arg2?
.\"	Print an open parenthesis, arg1 in quotes, then arg2 normally
.\"	(for trailing punctuation) and then a closing parenthesis.
.\"
.\"	# Set up traps and other miscellaneous stuff for Tcl/Tk man pages.
.if t .wh -1.3i ^B
.nr ^l \n(.l
.ad b
.\"	# Start an argument description
.de AP
.ie !"\\$4"" .TP \\$4
.el \{\
.   ie !"\\$2"" .TP \\n()Cu
.   el          .TP 15
.\}
.ta \\n()Au \\n()Bu
.ie !"\\$3"" \{\
\&\\$1 \\fI\\$2\\fP (\\$3)
.\".b
.\}
.el \{\
.br
.ie !"\\$2"" \{\
\&\\$1	\\fI\\$2\\fP
.\}
.el \{\
\&\\fI\\$1\\fP
.\}
.\}
..
.\"	# define tabbing values for .AP
.de AS
.nr )A 10n
.if !"\\$1"" .nr )A \\w'\\$1'u+3n
.nr )B \\n()Au+15n
.\"
.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n
.nr )C \\n()Bu+\\w'(in/out)'u+2n
..
.AS Tcl_Interp Tcl_CreateInterp in/out
.\"	# BS - start boxed text
.\"	# ^y = starting y location
.\"	# ^b = 1
.de BS
.br
.mk ^y
.nr ^b 1u
.if n .nf
.if n .ti 0
.if n \l'\\n(.lu\(ul'
.if n .fi
..
.\"	# BE - end boxed text (draw box now)
.de BE
.nf
.ti 0
.mk ^t
.ie n \l'\\n(^lu\(ul'
.el \{\
.\"	Draw four-sided box normally, but don't draw top of
.\"	box if the box started on an earlier page.
.ie !\\n(^b-1 \{\
\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.el \}\
\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul'
.\}
.\}
.fi
.br
.nr ^b 0
..
.\"	# VS - start vertical sidebar
.\"	# ^Y = starting y location
.\"	# ^v = 1 (for troff;  for nroff this doesn't matter)
.de VS
.if !"\\$2"" .br
.mk ^Y
.ie n 'mc \s12\(br\s0
.el .nr ^v 1u
..
.\"	# VE - end of vertical sidebar
.de VE
.ie n 'mc
.el \{\
.ev 2
.nf
.ti 0
.mk ^t
\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n'
.sp -1
.fi
.ev
.\}
.nr ^v 0
..
.\"	# Special macro to handle page bottom:  finish off current
.\"	# box/sidebar if in box/sidebar mode, then invoked standard
.\"	# page bottom macro.
.de ^B
.ev 2
'ti 0
'nf
.mk ^t
.if \\n(^b \{\
.\"	Draw three-sided box if this is the box's first page,
.\"	draw two sides but no top otherwise.
.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c
.\}
.if \\n(^v \{\
.nr ^x \\n(^tu+1v-\\n(^Yu
\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c
.\}
.bp
'fi
.ev
.if \\n(^b \{\
.mk ^y
.nr ^b 2
.\}
.if \\n(^v \{\
.mk ^Y
.\}
..
.\"	# DS - begin display
.de DS
.RS
.nf
.sp
..
.\"	# DE - end display
.de DE
.fi
.RE
.sp
..
.\"	# SO - start of list of standard options
.de SO
'ie '\\$1'' .ds So \\fBoptions\\fR
'el .ds So \\fB\\$1\\fR
.SH "STANDARD OPTIONS"
.LP
.nf
.ta 5.5c 11c
.ft B
..
.\"	# SE - end of list of standard options
.de SE
.fi
.ft R
.LP
See the \\*(So manual entry for details on the standard options.
..
.\"	# OP - start of full description for a single option
.de OP
.LP
.nf
.ta 4c
Command-Line Name:	\\fB\\$1\\fR
Database Name:	\\fB\\$2\\fR
Database Class:	\\fB\\$3\\fR
.fi
.IP
..
.\"	# CS - begin code excerpt
.de CS
.RS
.nf
.ta .25i .5i .75i 1i
..
.\"	# CE - end code excerpt
.de CE
.fi
.RE
..
.\"	# UL - underline word
.de UL
\\$1\l'|0\(ul'\\$2
..
.\"	# QW - apply quotation marks to word
.de QW
.ie '\\*(lq'"' ``\\$1''\\$2
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\$2
..
.\"	# PQ - apply parens and quotation marks to word
.de PQ
.ie '\\*(lq'"' (``\\$1''\\$2)\\$3
.\"" fix emacs highlighting
.el (\\*(lq\\$1\\*(rq\\$2)\\$3
..
.\"	# QR - quoted range
.de QR
.ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3
.\"" fix emacs highlighting
.el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3
..
.\"	# MT - "empty" string
.de MT
.QW ""
..
.BS
.SH NAME
rcs \- RCS low level utilities
.SH SYNOPSIS
package require \fBTcl 8\&.5 9\fR
.sp
package require \fBrcs ?0\&.2?\fR
.sp
\fB::rcs::text2dict\fR \fItext\fR
.sp
\fB::rcs::dict2text\fR \fIdict\fR
.sp
\fB::rcs::file2dict\fR \fIfilename\fR
.sp
\fB::rcs::dict2file\fR \fIfilename\fR \fIdict\fR
.sp
\fB::rcs::decodeRcsPatch\fR \fItext\fR
.sp
\fB::rcs::encodeRcsPatch\fR \fIpcmds\fR
.sp
\fB::rcs::applyRcsPatch\fR \fItext\fR \fIpcmds\fR
.sp
.BE
.SH DESCRIPTION
.PP
The \fIRevision Control System\fR, short \fIRCS\fR, is a set of
applications and related data formats which allow a system to persist
the history of changes to a text\&. It, and its relative SCCS are the
basis for many other such systems, like \fICVS\fR, etc\&.
.PP
This package \fIdoes not\fR implement RCS\&.
.PP
It only provides a number of low level commands which should be useful
in the implementation of any revision management system, namely:
.IP [1]
The conversion of texts into and out of a data structures which allow
the easy modification of such text by \fIpatches\fR, i\&.e\&. sequences
of instructions for the transformation of one text into an other\&.
.IP [2]
And the conversion of one particular format for patches, the so-called
\fIRCS patches\fR, into and out of data structures which allow
their easy application to texts\&.
.PP
.SH COMMANDS
.TP
\fB::rcs::text2dict\fR \fItext\fR
Converts the argument \fItext\fR into a dictionary containing and
representing the same text in an indexed form and returns that
dictionary as its result\&.
More information about the format of the result can be found in
section \fBTEXT DICT DATA STRUCTURE\fR\&. This command returns the
\fIcanonical\fR representation of the input\&.
.TP
\fB::rcs::dict2text\fR \fIdict\fR
This command provides the complementary operation to
\fB::rcs::text2dict\fR\&. It converts a dictionary in the form described
in section \fBTEXT DICT DATA STRUCTURE\fR back into a text and
returns that text as its result\&. The command does accept non-canonical
representations of the text as its input\&.
.TP
\fB::rcs::file2dict\fR \fIfilename\fR
This command is identical to \fB::rcs::text2dict\fR, except that it
reads the text to convert from the file with path \fIfilename\fR\&. The
file has to exist and must be readable as well\&.
.TP
\fB::rcs::dict2file\fR \fIfilename\fR \fIdict\fR
This command is identical to \fB::rcs::2dict2text\fR, except that it
stores the resulting text in the file with path \fIfilename\fR\&. The
file is created if it did not exist, and must be writable\&. The result
of the command is the empty string\&.
.TP
\fB::rcs::decodeRcsPatch\fR \fItext\fR
Converts the \fItext\fR argument into a patch command list (PCL) as
specified in the section \fBRCS PATCH COMMAND LIST\fR and
returns this list as its result\&.
It is assumed that the input text is in \fIdiff -n format\fR, also
known as \fIRCS patch\fR format, as specified in the section
\fBRCS PATCH FORMAT\fR\&.
Please note that the command ignores no-ops in the input, in other
words the resulting PCL contains only instructions doing something\&.
.TP
\fB::rcs::encodeRcsPatch\fR \fIpcmds\fR
This command provides the complementary operation to
\fB::rcs::decodeRcsPatch\fR\&. It convert a patch comand list (PCL) list
as specified in the section \fBRCS PATCH COMMAND LIST\fR back
into a text in \fBRCS PATCH FORMAT\fR and returns that text as its result\&.
.sp
Note that this command and \fB::rcs::decodeRcsPatch\fR are not exactly
complementary, as the latter strips no-ops from its input, which the
encoder cannot put back anymore into the generated RCS patch\&. In other
words, the result of a decode/encode step may not match the original
input at the character level, but it will match it at the functional
level\&.
.TP
\fB::rcs::applyRcsPatch\fR \fItext\fR \fIpcmds\fR
This operation applies a patch in the form of a PCL to a text given in
the form of a dictionary and returns the modified text, again as
dictionary, as its result\&.
.sp
To handle actual text use the commands \fB::rcs::text2dict\fR (or
equivalent) and \fB::rcs::decodeRcsPatch\fR to transform the inputs
into data structures acceptable to this command\&. Analogously use the
command \fB::rcs::dict2text\fR (or equivalent) to transform the
result of this command into actuall text as required\&.
.PP
.SH "TEXT DICT DATA STRUCTURE"
A text dictionary is a dictionary whose keys are integer numbers and
text strings as the associated values\&. The keys represent the line
numbers of a text and the values the text of that line\&.  Note that one
text can have many representations as a dictionary, as the index
values only have to be properly ordered for reconstruction, their
exact values do not matter\&. Similarly the strings may actually span
multiple physical lines\&.
.PP
The text
.PP
.CS

Hello World,
how are you ?
Fine, and you ?
.CE
.PP
for example can be represented by
.PP
.CS

{{1 {Hello World,}} {2 {how are you ?}} {3 {Fine, and you ?}}}
.CE
.PP
or
.PP
.CS

{{5 {Hello World,}} {8 {how are you ?}} {9 {Fine, and you ?}}}
.CE
.PP
or
.PP
.CS

{{-1 {Hello World,
how are you ?}} {4 {Fine, and you ?}}}
.CE
.PP
The first dictionary is the \fIcanonical\fR representation of the
text, with line numbers starting at \fB1\fR, increasing in steps of
\fB1\fR and without gaps, and each value representing exactly one
physical line\&.
.PP
All the commands creating dictionaries from text will return the
canonical representation of their input text\&. The commands taking a
dictionary and returning text will generally accept all
representations, canonical or not\&.
.PP
The result of applying a patch to a text dictionary will in general
cause the dictionary to become non-canonical\&.
.SH "RCS PATCH FORMAT"
A \fIpatch\fR is in general a series of instructions how to transform
an input text T into a different text T', and also encoded in text
form as well\&.
.PP
The text format for patches understood by this package is a very
simple one, known under the names \fIRCS patch\fR or
\fIdiff -n format\fR\&.
.PP
Patches in this format contain only two different commands, for the
deletion of old text, and addition of new text\&. The replacement of
some text by a different text is handled as combination of a deletion
following by an addition\&.
.PP
The format is line oriented, with each line containing either a
command or text data associated with the preceding command\&.
The first line of a \fIRCS patch\fR is always a command line\&.
.PP
The commands are:
.TP
""
The empty line is a command which does nothing\&.
.TP
"a\fBstart\fR \fBn\fR"
A line starting with the character \fBa\fR is a command for the
addition of text to the output\&. It is followed by \fBn\fR lines of
text data\&. When applying the patch the data is added just between the
lines \fBstart\fR and \fBstart\fR+1\&. The same effect is had by
appending the data to the existing text on line \fBstart\fR\&. A
non-existing line \fBstart\fR is created\&.
.TP
"d\fBstart\fR \fBn\fR"
A line starting with the character \fBd\fR is a command for the
deletion of text from the output\&. When applied it deletes \fBn\fR
lines of text, and the first line deleted is at index \fBstart\fR\&.
.PP
Note that the line indices \fBstart\fR always refer to the text which
is transformed as it is in its original state, without taking the
precending changes into account\&.
.PP
Note also that the instruction have to be applied in the order they
occur in the patch, or in a manner which produces the same result as
in-order application\&.
.PP
This is the format of results returned by the command
\fB::rcs::decodeRcsPatch\fR and accepted by the commands
\fB::rcs::encodeRcsPatch\fR and \fB::rcs::appplyRcsPatch\fR
resp\&.
Note however that the decoder will strip no-op commands, and the
encoder will not generate no-ops, making them not fully complementary
at the textual level, only at the functional level\&.
.PP
And example of a RCS patch is
.PP
.CS

d1 2
d4 1
a4 2
The named is the mother of all things\&.

a11 3
They both may be called deep and profound\&.
Deeper and more profound,
The door of all subtleties!
.CE
.SH "RCS PATCH COMMAND LIST"
Patch command lists (sort: PCL's) are the data structures generated by
patch decoder command and accepted by the patch encoder and applicator
commands\&. They represent RCS patches in the form of Tcl data
structures\&.
.PP
A PCL is a list where each element represents a single patch
instruction, either an addition, or a deletion\&. The elements are lists
themselves, where the first item specifies the command and the
remainder represent the arguments of the command\&.
.TP
a
This is the instruction for the addition of text\&. It has two
arguments, the index of the line where to add the text, and the text
to add, in this order\&.
.TP
d
This is the instruction for the deletion of text\&. It has two
arguments, the index of the line where to start deleting text, and the
number of lines to delete, in this order\&.
.PP
.PP
This is the format returned by the patch decoder command and accepted
as input by the patch encoder and applicator commands\&.
.PP
An example for a patch command is shown below, it represents the
example RCS patch found in section \fBRCS PATCH FORMAT\fR\&.
.PP
.CS

{{d 1 2} {d 4 1} {a 4 {The named is the mother of all things\&.

}} {a 11 {They both may be called deep and profound\&.
Deeper and more profound,
The door of all subtleties!}}}
.CE
.SH "BUGS, IDEAS, FEEDBACK"
This document, and the package it describes, will undoubtedly contain
bugs and other problems\&.
Please report such in the category \fIrcs\fR of the
\fITcllib Trackers\fR [http://core\&.tcl\&.tk/tcllib/reportlist]\&.
Please also report any ideas for enhancements you may have for either
package and/or documentation\&.
.PP
When proposing code changes, please provide \fIunified diffs\fR,
i\&.e the output of \fBdiff -u\fR\&.
.PP
Note further that \fIattachments\fR are strongly preferred over
inlined patches\&. Attachments can be made by going to the \fBEdit\fR
form of the ticket immediately after its creation, and then using the
left-most button in the secondary navigation bar\&.
.SH "SEE ALSO"
struct, textutil
.SH KEYWORDS
CVS, RCS, RCS patch, SCCS, diff -n format, patching, text conversion, text differences
.SH CATEGORY
Text processing
.SH COPYRIGHT
.nf
Copyright (c) 2005, Andreas Kupries <andreas_kupries@users\&.sourceforge\&.net>
Copyright (c) 2005, Colin McCormack <coldstore@users\&.sourceforge\&.net>

.fi