[comment {-*- tcl -*- doctools manpage}]
[manpage_begin doctoc_plugin_apiref n 1.0]
[see_also doctoc_intro]
[see_also doctoc_lang_cmdref]
[see_also doctoc_lang_faq]
[see_also doctoc_lang_intro]
[see_also doctoc_lang_syntax]
[see_also doctools::toc]
[keywords {formatting engine}]
[keywords markup]
[keywords plugin]
[keywords {semantic markup}]
[keywords {table of contents}]
[keywords toc]
[keywords {toc formatter}]
[copyright {2007 Andreas Kupries <andreas_kupries@users.sourceforge.net>}]
[moddesc   {Documentation tools}]
[titledesc {doctoc plugin API reference}]
[category  {Documentation tools}]
[description]
[para]

This document is intended for [term {plugin writers}], i.e. developers
wishing to write a toc [term {formatting engine}] for some output
format X.

[para]

It specifies the interaction between the [package doctools::toc]
package and its plugins, i.e. the interface any toc formatting engine
has to comply with.

[para]

This document deals with version 1 of the interface.

[para]

A reader who is on the other hand more interested in the markup
language itself should start with the

[term {doctoc language introduction}] and proceed from there to the
formal specifications, i.e. the [term {doctoc language syntax}] and
the [term {doctoc language command reference}].

[section OVERVIEW]

The API for a toc formatting engine consists of two major sections.

[para]

On the one side we have a set of commands through which the plugin is
able to query the frontend. These commands are provided by the
frontend and linked into the plugin interpreter. Please see section
[sectref {FRONTEND COMMANDS}] for their detailed specification.

[para]

And on the other side the plugin has to provide its own set of
commands which will then be called by the frontend in a specific
sequence while processing input. They, again, fall into two
categories, management and formatting.

Please see section [sectref {PLUGIN COMMANDS}] and its subsections for
their detailed specification.

[section {FRONTEND COMMANDS}]

This section specifies the set of commands through which a plugin,
also known as a toc formatting engine, is able to query the
frontend. These commands are provided by the frontend and linked into
the plugin interpreter.

[para]

I.e. a toc formatting engine can assume that all of the following
commands are present when any of its own commands (as specified in
section [sectref {PLUGIN COMMANDS}]) are executed.

[para]

Beyond that it can also assume that it has full access to its own safe
interpreter and thus is not able to damage the other parts of the
processor, nor can it damage the filesystem.

It is however able to either kill or hang the whole process, by
exiting, or running an infinite loop.

[para]

Coming back to the imported commands, all the commands with prefix
[emph dt_] provide limited access to specific parts of the frontend,
whereas the commands with prefix [emph ex_] provide access to the
state of the [package textutil::expander] object which does the main
parsing of the input within the frontend. These commands should not be
except under very special circumstances.

[para]

[list_begin definitions]

[call [cmd dt_fmap] [arg symfname]]

Query command. It returns the actual pathname to use in the output in
place of the symbolic filename [arg symfname]. It will return the
unchanged input if no mapping was established for [arg symfname].

[para]

The required mappings are established with the method [method map] of
a frontend, as explained in section [sectref-external {OBJECT METHODS}]
of the documentation for the package [package doctools::toc].

[call [cmd dt_format]]

Query command. It returns the name of the format associated with the
toc formatting engine.

[call [cmd dt_read] [arg file]]

Controlled filesystem access. Returns contents of [arg file] for
whatever use desired by the plugin.

Only files which are either in the same directory as the file
containing the engine, or below it, can be loaded. Trying to load a
file outside of this directory causes an error.

[call [cmd dt_source] [arg file]]

Controlled filesystem access. This command allows the toc formatting
engine to load additional Tcl code it may need.

Only files which are either in the same directory as the file
containing the engine, or below it, can be loaded. Trying to load a
file outside of this directory causes an error.

[call [cmd ex_cappend] [arg text]]
Appends a string to the output in the current context.  This command
should rarely be used by macros or application code.

[call [cmd ex_cget] [arg varname]]
Retrieves the value of variable [arg varname], defined in the current
context.

[call [cmd ex_cis] [arg cname]]
Determines whether or not the name of the current context is
[arg cname].

[call [cmd ex_cname]]
Returns the name of the current context.

[call [cmd ex_cpop] [arg cname]]
Pops a context from the context stack, returning all accumulated
output in that context.  The context must be named [arg cname], or an
error results.

[call [cmd ex_cpush] [arg cname]]
Pushes a context named [arg cname] onto the context stack.  The
context must be popped by [method cpop] before expansion ends or an
error results.

[call [cmd ex_cset] [arg varname] [arg value]]
Sets variable [arg varname] to [arg value] in the current context.

[call [cmd ex_lb] [opt [arg newbracket]]]
Returns the current value of the left macro expansion bracket; this is
for use as or within a macro, when the bracket needs to be included in
the output text.  If [arg newbracket] is specified, it becomes the new
bracket, and is returned.

[call [cmd ex_rb] [opt [arg newbracket]]]
Returns the current value of the right macro expansion bracket; this
is for use as or within a macro, when the bracket needs to be included
in the output text.  If [arg newbracket] is specified, it becomes the
new bracket, and is returned.

[list_end]

[section {PLUGIN COMMANDS}]

The plugin has to provide its own set of commands which will then be
called by the frontend in a specific sequence while processing
input. They fall into two categories, management and formatting. Their
expected names, signatures, and responsibilities are specified in the
following two subsections.

[subsection {Management commands}]

The management commands a plugin has to provide are used by the
frontend to

[list_begin enumerated]
[enum] initialize and shutdown the plugin
[enum] determine the number of passes it has
       to make over the input
[enum] initialize and shutdown each pass
[enum] query and initialize engine parameters
[list_end]
[para]

After the plugin has been loaded and the frontend commands are
established the commands will be called in the following sequence:

[example {
    toc_numpasses -> n
    toc_listvariables -> vars

    toc_varset var1 value1
    toc_varset var2 value2
    ...
    toc_varset varK valueK
    toc_initialize
    toc_setup 1
    ...
    toc_setup 2
    ...
    ...
    toc_setup n
    ...
    toc_postprocess
    toc_shutdown
    ...
}]

I.e. first the number of passes and the set of available engine
parameters is established, followed by calls setting the
parameters. That second part is optional.

[para]

After that the plugin is initialized, the specified number of passes
executed, the final result run through a global post processing step
and at last the plugin is shutdown again. This can be followed by more
conversions, restarting the sequence at [cmd toc_varset].

[para]

In each of the passes, i.e. after the calls of [cmd toc_setup] the
frontend will process the input and call the formatting commands as
markup is encountered. This means that the sequence of formatting
commands is determined by the grammar of the doctoc markup language,
as specified in the [term {doctoc language syntax}] specification.

[para]

A different way of looking at the sequence is:

[list_begin itemized]
[item] First some basic parameters are determined.

[item] Then everything starting at the first [cmd toc_varset] to
[cmd toc_shutdown] forms a [term run], the formatting of a
single input. Each run can be followed by more.

[item] Embedded within each run we have one or more [term passes],
each starting with [cmd toc_setup] and going until either the next
[cmd toc_setup] or [cmd toc_postprocess] is reached.

[para]

If more than one pass is required to perform the formatting only the
output of the last pass is relevant. The output of all the previous,
preparatory passes is ignored.

[list_end]
[para]

The commands, their names, signatures, and responsibilities are, in
detail:

[list_begin definitions]

[call [cmd toc_initialize]]
[emph Initialization/Shutdown].

This command is called at the beginning of every conversion run, as
the first command of that run. Note that a run is not a pass, but may
consist of multiple passes.

It has to initialize the general state of the plugin, beyond the
initialization done during the load. No return value is expected, and
any returned value is ignored.

[call [cmd toc_listvariables]]
[emph Initialization/Shutdown] and [emph {Engine parameters}].

Second command is called after the plugin code has been loaded,
i.e. immediately after [cmd toc_numpasses].

It has to return a list containing the names of the parameters the
frontend can set to configure the engine. This list can be empty.

[call [cmd toc_numpasses]]
[emph Initialization/Shutdown] and [emph {Pass management}].

First command called after the plugin code has been loaded. No other
command of the engine will be called before it.

It has to return the number of passes this engine requires to fully
process the input document. This value has to be an integer number
greater or equal to one.

[call [cmd toc_postprocess] [arg text]]
[emph Initialization/Shutdown].

This command is called immediately after the last pass in a run. Its
argument is the result of the conversion generated by that pass. It is
provided to allow the engine to perform any global modifications of
the generated document. If no post-processing is required for a
specific format the command has to just return the argument.

[para]

Expected to return a value, the final result of formatting the input.

[call [cmd toc_setup] [arg n]]
[emph Initialization/Shutdown] and [emph {Pass management}].

This command is called at the beginning of each pass over the input in
a run. Its argument is the number of the pass which has begun. Passes
are counted from [const 1] upward.

The command has to set up the internal state of the plugin for this
particular pass. No return value is expected, and any returned value
is ignored.

[call [cmd toc_shutdown]]
[emph Initialization/Shutdown].

This command is called at the end of every conversion run. It is the
last command called in a run. It has to clean up of all the
run-specific state in the plugin.

After the call the engine has to be in a state which allows the
initiation of another run without fear that information from the last
run is leaked into this new run.

No return value is expected, and any returned value is ignored.

[call [cmd toc_varset] [arg varname] [arg text]]
[emph {Engine parameters}].

This command is called by the frontend to set an engine parameter to a
particular value.

The parameter to change is specified by [arg varname], the value to
set in [arg text].

[para]

The command has to throw an error if an unknown [arg varname] is
used. Only the names returned by [cmd toc_listvariables] have to be
considered as known.

[para]

The values of all engine parameters have to persist between passes and
runs.

[list_end]

[subsection {Formatting commands}]

The formatting commands have to implement the formatting for the
output format, for all the markup commands of the doctoc markup
language, except [cmd lb], [cmd rb], [cmd vset], [cmd include], and
[cmd comment]. These exceptions are processed by the frontend and are
never seen by the plugin. In return a command for the formatting of
plain text has to be provided, something which has no markup in the
input at all.

[para]

This means, that each of the five markup commands specified in the
[term {doctoc language command reference}] and outside of the set of
exceptions listed above has an equivalent formatting command which
takes the same arguments as the markup command and whose name is the
name of markup command with the prefix [emph fmt_] added to it.

[para]

All commands are expected to format their input in some way per the
semantics specified in the command reference and to return whatever
part of this that they deem necessary as their result, which will be
added to the output.

[para]

To avoid essentially duplicating the command reference we do not list
any of the command here and simply refer the reader to the
[term {doctoc language command reference}] for their signature and
description. The sole exception is the plain text formatter, which has
no equivalent markup command.

[para]

The calling sequence of formatting commands is not as rigid as for the
management commands, but determined by the grammar of the doctoc
markup language, as specified in the [term {doctoc language syntax}]
specification.

[para]

[list_begin definitions]

[call [cmd fmt_plain_text] [arg text]]
[emph {No associated markup command}].

[para] Called by the frontend for any plain text encountered in the
input. It has to perform any and all special processing required for
plain text.

[para] The formatted text is expected as the result of the command,
and added to the output. If no special processing is required it has
to simply return its argument without change.

[list_end]

[vset CATEGORY doctools]
[include ../common-text/feedback.inc]
[manpage_end]