<?xml version="1.0" ?>
<node name="/Channel_Type_Text" xmlns:tp="http://telepathy.freedesktop.org/wiki/DbusSpec#extensions-v0">
  <tp:copyright> Copyright © 2005-2009 Collabora Limited </tp:copyright>
  <tp:copyright> Copyright © 2005-2009 Nokia Corporation </tp:copyright>
  <tp:copyright> Copyright © 2006 INdT </tp:copyright>
  <tp:license xmlns="http://www.w3.org/1999/xhtml">
    <p>This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.</p>

<p>This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
Lesser General Public License for more details.</p>

<p>You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.</p>
  </tp:license>
  <interface name="org.freedesktop.Telepathy.Channel.Type.Text">
    <tp:requires interface="org.freedesktop.Telepathy.Channel"/>
    <tp:requires
    interface="org.freedesktop.Telepathy.Channel.Interface.Messages"/>
    <tp:changed version="0.21.5">The Messages interface is now
      mandatory</tp:changed>
    <tp:changed version="0.24.0">This interface used to have a bunch of
      clunky <tp:dbus-ref
      namespace='org.freedesktop'>Telepathy.Properties</tp:dbus-ref>. They have
      been removed in favour of D-Bus properties on the <tp:dbus-ref
      namespace='ofdT.Channel.Interface'>Room2</tp:dbus-ref>, <tp:dbus-ref
      namespace='ofdT.Channel.Interface'>Subject2</tp:dbus-ref> and
      <tp:dbus-ref namespace='ofdT.Channel.Interface'>RoomConfig1</tp:dbus-ref>
      interfaces.</tp:changed>

    <tp:simple-type name="Message_ID" type="u" array-name="Message_ID_List">
      <tp:docstring>
        A unique-per-channel identifier for an incoming message. These
        SHOULD be allocated in a way that minimizes collisions (in particular,
        message IDs SHOULD NOT be re-used until all of the 32-bit integer
        space has already been used).
      </tp:docstring>
    </tp:simple-type>

    <tp:struct name="Pending_Text_Message" array-name="Pending_Text_Message_List">
      <tp:deprecated version="0.21.5">New APIs should use
        an array of <tp:type>Message_Part</tp:type> instead.</tp:deprecated>
      <tp:docstring>A struct (message ID, timestamp in seconds since
        1970-01-01 00:00 UTC, sender's handle, message type, flags, text)
        representing a pending text message, as returned by
        <tp:member-ref>ListPendingMessages</tp:member-ref>.  The arguments of
        the <tp:member-ref>Received</tp:member-ref> signal also match this
        struct's signature.</tp:docstring>
      <tp:member type="u" tp:type="Message_ID" name="Identifier"/>
      <tp:member type="u" tp:type="Unix_Timestamp" name="Unix_Timestamp"/>
      <tp:member type="u" tp:type="Contact_Handle" name="Sender"/>
      <tp:member type="u" tp:type="Channel_Text_Message_Type"
                 name="Message_Type"/>
      <tp:member type="u" tp:type="Channel_Text_Message_Flags" name="Flags"/>
      <tp:member type="s" name="Text"/>
    </tp:struct>

    <method name="AcknowledgePendingMessages"
      tp:name-for-bindings="Acknowledge_Pending_Messages">
      <arg direction="in" name="IDs" type="au" tp:type="Message_ID[]">
        <tp:docstring>
          The IDs of the messages to acknowledge
        </tp:docstring>
      </arg>
      <tp:docstring>
        Inform the channel that you have handled messages by displaying them to
        the user (or equivalent), so they can be removed from the pending queue.
      </tp:docstring>
      <tp:possible-errors>
        <tp:error name="org.freedesktop.Telepathy.Error.InvalidArgument">
          <tp:docstring>
            A given message ID was not found, so no action was taken
          </tp:docstring>
        </tp:error>
      </tp:possible-errors>
    </method>

    <method name="GetMessageTypes" tp:name-for-bindings="Get_Message_Types">
      <tp:deprecated version="0.21.5">Consulting
        <tp:dbus-ref namespace="ofdT.Channel.Interface.Messages"
          >MessageTypes</tp:dbus-ref> is preferred.
      </tp:deprecated>
      <arg direction="out" type="au" tp:type="Channel_Text_Message_Type[]"
        name="Available_Types">
        <tp:docstring>
          An array of integer message types (ChannelTextMessageType)
        </tp:docstring>
      </arg>
      <tp:docstring>
        Return an array indicating which types of message may be sent on this
        channel.
      </tp:docstring>
    </method>

    <method name="ListPendingMessages"
      tp:name-for-bindings="List_Pending_Messages">
      <tp:deprecated version="0.21.5">Consulting
        <tp:dbus-ref namespace="ofdT.Channel.Interface.Messages"
          >PendingMessages</tp:dbus-ref> is preferred.
      </tp:deprecated>
      <arg direction="in" name="Clear" type="b">
        <tp:docstring>
          If true, behave as if
          <tp:member-ref>AcknowledgePendingMessages</tp:member-ref> had also
          been called.
        </tp:docstring>
        <tp:deprecated version="0.17.3">
          Setting this to true is NOT RECOMMENDED for clients that
          have some sort of persistent message storage - clients SHOULD only
          acknowledge messages after they have actually stored them, which is
          impossible if this flag is true.</tp:deprecated>
      </arg>
      <arg direction="out" type="a(uuuuus)" tp:type="Pending_Text_Message[]"
        name="Pending_Messages">
        <tp:docstring xmlns="http://www.w3.org/1999/xhtml">
          An array of structs representing the pending queue. Each contains:
          <ul>
            <li>a numeric identifier</li>
            <li>a Unix timestamp indicating when the message was received</li>
            <li>the contact handle for the contact who sent the message</li>
            <li>the message type, taken from ChannelTextMessageType</li>
            <li>the bitwise-OR of the message flags from ChannelTextMessageFlags</li>
            <li>the text of the message</li>
          </ul>
        </tp:docstring>
      </arg>
      <tp:docstring>
        List the messages currently in the pending queue, and optionally
        remove then all.
      </tp:docstring>
    </method>

    <signal name="LostMessage" tp:name-for-bindings="Lost_Message">
      <tp:deprecated version="0.21.5">In practice, this signal
        was not emitted, and does not have useful semantics.</tp:deprecated>
      <tp:docstring>
        This signal is emitted to indicate that an incoming message was
        not able to be stored and forwarded by the connection manager
        due to lack of memory.
      </tp:docstring>
    </signal>

    <signal name="Received" tp:name-for-bindings="Received">
      <tp:deprecated version="0.21.5">The
        <tp:dbus-ref namespace="ofdT.Channel.Interface.Messages"
          >MessageReceived</tp:dbus-ref> signal is more informative.
      </tp:deprecated>
      <arg name="ID" type="u">
        <tp:docstring>
          A numeric identifier for acknowledging the message
        </tp:docstring>
      </arg>
      <arg name="Timestamp" type="u" tp:type="Unix_Timestamp">
        <tp:docstring>
          A Unix timestamp indicating when the message was received
        </tp:docstring>
      </arg>
      <arg name="Sender" type="u" tp:type="Contact_Handle">
        <tp:docstring>
          The handle of the contact who sent the message
        </tp:docstring>
      </arg>
      <arg name="Type" type="u" tp:type="Channel_Text_Message_Type">
        <tp:docstring>
          The type of the message (normal, action, notice, etc.)
        </tp:docstring>
      </arg>
      <arg name="Flags" type="u" tp:type="Channel_Text_Message_Flags">
        <tp:docstring>
          A bitwise OR of the message flags
        </tp:docstring>
      </arg>
      <arg name="Text" type="s">
        <tp:docstring>
          The text of the message
        </tp:docstring>
      </arg>
      <tp:docstring>
        Signals that a message with the given id, timestamp, sender, type
        and text has been received on this channel. Applications that catch
        this signal and reliably inform the user of the message should
        acknowledge that they have dealt with the message with the
        <tp:member-ref>AcknowledgePendingMessages</tp:member-ref> method.
      </tp:docstring>
    </signal>

    <method name="Send" tp:name-for-bindings="Send">
      <tp:deprecated version="0.21.5">The
        <tp:dbus-ref namespace="ofdT.Channel.Interface.Messages"
          >SendMessage</tp:dbus-ref> method is more flexible.
      </tp:deprecated>
      <arg direction="in" name="Type" type="u" tp:type="Channel_Text_Message_Type">
        <tp:docstring>
          An integer indicating the type of the message
        </tp:docstring>
      </arg>
      <arg direction="in" name="Text" type="s">
        <tp:docstring>
          The message to send
        </tp:docstring>
      </arg>
      <tp:docstring xmlns="http://www.w3.org/1999/xhtml">
        <p>Request that a message be sent on this channel. When the message has
          been submitted for delivery, this method will return and the
          <tp:member-ref>Sent</tp:member-ref> signal will be emitted. If the
          message cannot be submitted for delivery, the method returns an error
          and no signal is emitted.</p>

        <p>This method SHOULD return before the Sent signal is
          emitted.</p>

        <tp:rationale>
          <p>When a Text channel implements the <tp:dbus-ref
              namespace="org.freedesktop.Telepathy.Channel.Interface">Messages</tp:dbus-ref>
            interface, that "SHOULD" becomes a "MUST".</p>
        </tp:rationale>
      </tp:docstring>
      <tp:possible-errors>
        <tp:error name="org.freedesktop.Telepathy.Error.Disconnected"/>
        <tp:error name="org.freedesktop.Telepathy.Error.NetworkError"/>
        <tp:error name="org.freedesktop.Telepathy.Error.InvalidArgument"/>
        <tp:error name="org.freedesktop.Telepathy.Error.PermissionDenied"/>
      </tp:possible-errors>
    </method>

    <tp:enum name="Channel_Text_Send_Error" type="u">
      <tp:enumvalue suffix="Unknown" value="0">
        <tp:docstring>
        An unknown error occurred
        </tp:docstring>
      </tp:enumvalue>
      <tp:enumvalue suffix="Offline" value="1">
        <tp:docstring>
        The requested contact was offline
        </tp:docstring>
      </tp:enumvalue>
      <tp:enumvalue suffix="Invalid_Contact" value="2">
        <tp:docstring>
        The requested contact is not valid
        </tp:docstring>
      </tp:enumvalue>
      <tp:enumvalue suffix="Permission_Denied" value="3">
        <tp:docstring>
        The user does not have permission to speak on this channel
        </tp:docstring>
      </tp:enumvalue>
      <tp:enumvalue suffix="Too_Long" value="4">
        <tp:docstring>
        The outgoing message was too long and was rejected by the server
        </tp:docstring>
      </tp:enumvalue>
      <tp:enumvalue suffix="Not_Implemented" value="5">
        <tp:docstring>
        The channel doesn't support sending text messages to the requested
        contact
        </tp:docstring>
      </tp:enumvalue>
    </tp:enum>

    <signal name="SendError" tp:name-for-bindings="Send_Error">
      <tp:deprecated version="0.21.5">Delivery reporting is now
        provided by the <tp:dbus-ref namespace="ofdT.Channel.Interface"
          >Messages</tp:dbus-ref> interface.
      </tp:deprecated>
      <arg name="Error" type="u" tp:type="Channel_Text_Send_Error">
        <tp:docstring>
          The error that occurred
        </tp:docstring>
      </arg>
      <arg name="Timestamp" type="u" tp:type="Unix_Timestamp">
        <tp:docstring>
          The Unix timestamp indicating when the message was sent
        </tp:docstring>
      </arg>
      <arg name="Type" type="u" tp:type="Channel_Text_Message_Type">
        <tp:docstring>
          The message type
        </tp:docstring>
      </arg>
      <arg name="Text" type="s">
        <tp:docstring>
          The text of the message
        </tp:docstring>
      </arg>
      <tp:docstring xmlns="http://www.w3.org/1999/xhtml">
        <p>Signals that an outgoing message has failed to send. The error
          will be one of the values from ChannelTextSendError.</p>

        <p>This signal should only be emitted for messages for which
          <tp:member-ref>Sent</tp:member-ref> has already been emitted and
          <tp:member-ref>Send</tp:member-ref> has already returned success.</p>
      </tp:docstring>
      <tp:changed version="0.17.3">older spec versions claimed that SendError
        was emitted <em>instead of</em> Sent, rather than <em>in addition
        to</em> Sent. However, the 0.17.3+ semantics were what we'd always
        actually implemented.</tp:changed>
    </signal>

    <signal name="Sent" tp:name-for-bindings="Sent">
      <tp:deprecated version="0.21.5">The
        <tp:dbus-ref namespace="ofdT.Channel.Interface.Messages"
          >MessageSent</tp:dbus-ref> signal is more informative.
      </tp:deprecated>
      <arg name="Timestamp" type="u" tp:type="Unix_Timestamp">
        <tp:docstring>
          Unix timestamp indicating when the message was sent
        </tp:docstring>
      </arg>
      <arg name="Type" type="u" tp:type="Channel_Text_Message_Type">
        <tp:docstring>
          The message type (normal, action, notice, etc) from
          ChannelTextMessageType
        </tp:docstring>
      </arg>
      <arg name="Text" type="s">
        <tp:docstring>
          The text of the message. If the message was, or will be, altered
          during transmission, this argument SHOULD reflect what other
          contacts will receive rather than being a copy of the argument
          to <tp:member-ref>Send</tp:member-ref>.
        </tp:docstring>
      </arg>
      <tp:docstring xmlns="http://www.w3.org/1999/xhtml">
        <p>Signals that a message has been submitted for sending.</p>
      </tp:docstring>
    </signal>

    <tp:enum name="Channel_Text_Message_Type" type="u"
      array-name="Channel_Text_Message_Type_List">
      <tp:docstring>
        The type of message.
      </tp:docstring>

      <tp:enumvalue suffix="Normal" value="0">
        <tp:docstring>
        An ordinary chat message. Unknown types SHOULD be treated like this.
        </tp:docstring>
      </tp:enumvalue>

      <tp:enumvalue suffix="Action" value="1">
        <tp:docstring>
        An action which might be presented to the user as
        "* &lt;sender&gt; &lt;action&gt;", such as an IRC CTCP
        ACTION (typically selected by the "/me" command). For example, the
        text of the message might be "drinks more coffee".
        </tp:docstring>
      </tp:enumvalue>

      <tp:enumvalue suffix="Notice" value="2">
        <tp:docstring>
        A one-off or automated message not necessarily expecting a reply
        </tp:docstring>
      </tp:enumvalue>

      <tp:enumvalue suffix="Auto_Reply" value="3">
        <tp:docstring>
        An automatically-generated reply message.
        </tp:docstring>
      </tp:enumvalue>

      <tp:enumvalue suffix="Delivery_Report" value="4">
        <tp:docstring>
          A delivery report. This message type MUST NOT appear unless the
          channel supports the <tp:dbus-ref
            namespace="org.freedesktop.Telepathy.Channel.Interface">Messages</tp:dbus-ref>
          interface; see <tp:type>Message_Part</tp:type> for the format that
          delivery reports must take.
        </tp:docstring>
      </tp:enumvalue>
    </tp:enum>

    <tp:flags name="Channel_Text_Message_Flags" value-prefix="Channel_Text_Message_Flag" type="u">
      <tp:deprecated version="0.21.5">The
        <tp:dbus-ref namespace="ofdT.Channel.Interface"
          >Messages</tp:dbus-ref> interface has an extensible data structure
        including separate booleans for most of these flags.
      </tp:deprecated>
      <tp:flag suffix="Truncated" value="1">
        <tp:docstring>
        The incoming message was truncated to a shorter length by the
        server or the connection manager.
        </tp:docstring>
      </tp:flag>

      <tp:flag suffix="Non_Text_Content" value="2">
        <tp:docstring xmlns="http://www.w3.org/1999/xhtml">
          <p>The incoming message contained non-text content which cannot be
            represented by this interface, but has been signalled
            in the <tp:dbus-ref
            namespace="org.freedesktop.Telepathy.Channel.Interface">Messages</tp:dbus-ref>
            interface.</p>

          <p>Connection managers SHOULD only set this flag if the non-text
            content appears to be relatively significant (exactly how
            significant is up to the implementor). The intention is that
            if this flag is set, clients using this interface SHOULD inform
            the user that part of the message was not understood.</p>
        </tp:docstring>
      </tp:flag>

      <tp:flag suffix="Scrollback" value="4">
        <tp:docstring xmlns="http://www.w3.org/1999/xhtml">
          <p>The incoming message was part of a replay of message history.</p>

          <tp:rationale>
            <p>In XMPP multi-user chat, a few past messages are replayed
              when you join a chatroom. A sufficiently capable IRC connection
              manager could also set this flag on historical messages when
              connected to a proxy like bip or irssi-proxy. The existence
              of this flag allows loggers and UIs to use better heuristics
              when eliminating duplicates (a simple implementation made
              possible by this flag would be to avoid logging scrollback
              at all).</p>
          </tp:rationale>
        </tp:docstring>
      </tp:flag>

      <tp:flag suffix="Rescued" value="8">
        <tp:docstring xmlns="http://www.w3.org/1999/xhtml">
          <p>The incoming message has been seen in a previous channel during
            the lifetime of the <tp:dbus-ref
            namespace="org.freedesktop.Telepathy">Connection</tp:dbus-ref>, but
            had not been acknowledged
            when that channel closed, causing an identical channel (the
            channel in which the message now appears) to open.</p>

          <tp:rationale>
            <p>This means that a logger (which should already have seen the
              message in the previous channel) is able to recognise and ignore
              these replayed messages.</p>
          </tp:rationale>
        </tp:docstring>
      </tp:flag>
    </tp:flags>

    <tp:docstring xmlns="http://www.w3.org/1999/xhtml">
      <p>A channel type for sending and receiving messages. This channel type
        is primarily used for textual messages, but can also be used for
        formatted text, text with "attachments", or binary messages on some
        protocols.</p>

      <p>Most of the methods and signals on this interface are deprecated,
        since they only support plain-text messages with limited metadata.
        See the mandatory <tp:dbus-ref
          namespace="ofdT.Channel.Interface">Messages</tp:dbus-ref>
        interface for the modern equivalents.</p>

      <p>When a message is received, an identifier is assigned and a
        <tp:dbus-ref namespace="ofdT.Channel.Interface.Messages"
          >MessageReceived</tp:dbus-ref> signal emitted, and the message
        is placed in a pending queue represented by the
        <tp:dbus-ref namespace="ofdT.Channel.Interface.Messages"
          >PendingMessages</tp:dbus-ref> property.
        When the <tp:dbus-ref
          namespace="org.freedesktop.Telepathy.Client">Handler</tp:dbus-ref>
        for a channel has handled the message by showing it to the user
        (or equivalent), it should acknowledge the receipt of that message
        using the <tp:member-ref>AcknowledgePendingMessages</tp:member-ref>
        method, and the message will then be removed from the pending queue.
        Numeric identifiers for received messages may be reused over the
        lifetime of the channel.</p>

      <p>Sending messages can be requested using the
        <tp:dbus-ref namespace="ofdT.Channel.Interface.Messages"
          >SendMessage</tp:dbus-ref> method, which will return
        successfully when the message has been submitted for sending, or
        return an error with no signal emission if there is an immediate
        failure. If a message is submitted for sending but delivery of the
        message later fails, this is indicated by a delivery report, which
        is received in the same way as an incoming message.</p>

      <p>Simple one-to-one chats (such as streams of private messages in
        XMPP or IRC) should be represented by a Text channel whose
        <tp:dbus-ref namespace="ofdT.Channel">TargetHandleType</tp:dbus-ref>
        is <tp:value-ref type="Handle_Type">Contact</tp:value-ref>. The
        expected way to request such a channel is to set the <tp:dbus-ref
        namespace='ofdT.Channel'>ChannelType</tp:dbus-ref>, <tp:dbus-ref
        namespace='ofdT.Channel'>TargetHandleType</tp:dbus-ref>,
        and either <tp:dbus-ref
        namespace='ofdT.Channel'>TargetHandle</tp:dbus-ref> or <tp:dbus-ref
        namespace='ofdT.Channel'>TargetID</tp:dbus-ref> in a call to
        <tp:dbus-ref
        namespace='ofdT.ChannelDispatcher'>EnsureChannel</tp:dbus-ref>.</p>

      <p>Named chat rooms whose identity can be saved and used again later
        (IRC channels, Jabber MUCs) are expected to be represented by Text
        channels with <tp:dbus-ref
        namespace="ofdT.Channel">TargetHandleType</tp:dbus-ref> =
        <tp:value-ref type="Handle_Type">Room</tp:value-ref> and the
        <tp:dbus-ref namespace="ofdT.Channel.Interface">Group</tp:dbus-ref>
        interface. In protocols where a chatroom can be used as a continuation
        of one or more one-to-one chats, these channels should also have the
        <tp:dbus-ref namespace="ofdT.Channel.Interface">Conference</tp:dbus-ref>
        interface.</p>

      <p>Unnamed, transient chat rooms which cannot be rejoined by their
        unique identifier (e.g. a conversation on MSN which has, or once had,
        three or more participants) are expected to be represented by Text
        channels with <tp:dbus-ref
        namespace="ofdT.Channel">TargetHandleType</tp:dbus-ref> = <tp:value-ref
        type="Handle_Type">None</tp:value-ref> (and hence <tp:dbus-ref
        namespace="ofdT.Channel">TargetHandle</tp:dbus-ref> = 0),
        <tp:dbus-ref namespace="ofdT.Channel.Interface">Group</tp:dbus-ref>
        interface, and optionally the
        <tp:dbus-ref namespace="ofdT.Channel.Interface">Conference</tp:dbus-ref>
        interface.</p>

      <p>On protocols like MSN where a conversation with a user is actually
        just a nameless chat room starting with exactly two members, to which
        more members can be invited, the initial one-to-one conversation
        SHOULD be represented with <tp:dbus-ref
        namespace="ofdT.Channel">TargetHandleType</tp:dbus-ref> =
        <tp:value-ref type="Handle_Type">Contact</tp:value-ref>. If a third
        participant
        joins or is invited, this SHOULD be represented by signalling
        a new <tp:dbus-ref
          namespace="ofdT.Channel.Interface">Conference</tp:dbus-ref> channel
        with the one-to-one channel in its <tp:dbus-ref
          namespace="ofdT.Channel.Interface.Conference"
          >InitialChannels</tp:dbus-ref>, migrating the underlying protocol
        object from the one-to-one channel to the Conference channel,
        and creating a new protocol-level conversation if the one-to-one
        channel is re-used. See the Conference interface for more details.</p>

      <tp:rationale>
        <p>This keeps the presentation of all one-to-one conversations
          uniform, and makes it easier to hand over a conversation from a
          1-1-specific UI to a more elaborate multi-user UI; while it does
          require UIs to understand Conference to follow the
          upgrade, UIs that will deal with XMPP need to understand Conference
          anyway.</p>
      </tp:rationale>

      <p>If a channel of type Text is closed while it has pending messages,
        the connection manager MUST allow this, but SHOULD open a new channel
        to deliver those messages, signalling it as a new channel with the
        <tp:dbus-ref
          namespace="ofdT.Connection.Interface.Requests">NewChannels</tp:dbus-ref>
        signal. The new channel should resemble the old channel, but have
        <tp:dbus-ref namespace='ofdT.Channel'>Requested</tp:dbus-ref> = FALSE
        regardless of its previous value; the <tp:dbus-ref
        namespace='ofdT.Channel'>InitiatorHandle</tp:dbus-ref>
        and <tp:dbus-ref namespace='ofdT.Channel'>InitiatorID</tp:dbus-ref>
        should correspond to the sender of one of the pending
        messages.</p>

      <tp:rationale>
        <p>In effect, this turns this situation, in which a client
          is likely to lose messages:</p>

        <ul>
          <li>UI window is closed</li>
          <li>message arrives</li>
          <li>text channel emits Received</li>
          <li>UI calls Close on text channel before it has seen the
            Received signal</li>
          <li>text channel emits Closed and closes</li>
        </ul>

        <p>into something nearly equivalent to this situation, which is
          fine:</p>

        <ul>
          <li>UI window is closed</li>
          <li>UI calls Close on text channel</li>
          <li>text channel emits Closed and closes</li>
          <li>message arrives</li>
          <li>new text channel is created, connection emits NewChannels</li>
          <li>(the same or a different) UI handles it</li>
        </ul>

        <p>Requested must be set to FALSE so the replacement channel
          will be handled by something.</p>

        <p>In practice, connection managers usually implement this by keeping
          the same internal object that represented the old channel, adjusting
          its properties, signalling that it was closed, then immediately
          re-signalling it as a new channel.</p>
      </tp:rationale>

      <p>As a result, Text channels SHOULD implement <tp:dbus-ref
          namespace="ofdT">Channel.Interface.Destroyable</tp:dbus-ref>.</p>

      <tp:rationale>
        <p>This "respawning" behaviour becomes problematic if there is no
          suitable handler for Text channels, or if a particular message
          repeatedly crashes the Text channel handler; a channel dispatcher
          can't just Close() the channel in these situations, because
          it will come back.</p>

        <p>In these situations, the channel dispatcher needs a last-resort
          way to destroy the channel and stop it respawning. It could either
          acknowledge the messages itself, or use the Destroyable interface;
          the Destroyable interface has the advantage that it's not
          channel-type-dependent, so the channel dispatcher only has to
          understand one extra interface, however many channel types
          eventually need a distinction between Close and Destroy.</p>
      </tp:rationale>

      <p>Opaquely-named rejoinable chatrooms (such as Skype rooms) are
        represented using the properties in the <tp:dbus-ref
        namespace="ofdT.Channel.Interface">Room2</tp:dbus-ref>
        interface. Instructions and examples of how to request
        such channels are given in said interface's description.</p>

    </tp:docstring>
  </interface>
</node>
<!-- vim:set sw=2 sts=2 et ft=xml: -->