% \iffalse meta-comment
%
% Copyright (C) 2017 by Elmar Peise
% -----------------------------------------
%
% This package is distributed under the MIT license.
%
% \fi
%
% \iffalse
%<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
%<package>\ProvidesPackage{drawmatrix}[2017/06/05 v1.5.0 drawmatrix package]
%
%<*driver>
\documentclass{ltxdoc}
\usepackage{drawmatrix}
\usepackage{xspace}
\usepackage{tcolorbox}
\usepackage{lstautodedent}
\usepackage{makeidx}
\makeindex
\tcbuselibrary{documentation}
\lstset{autodedent=true, language=TeX}
\tcbset{
    /tcb/docexample/.append style={sidebyside, righthand width=.2\textwidth},
    docmulti/.style={after={}, height=\baselineskip, after skip=-.75em},
}
\tcbmakedocSubKey{docDmKey}{drawmatrix}
\EnableCrossrefs
\RecordChanges
\OnlyDescription
\begin{document}
  \DocInput{drawmatrix.dtx}
\end{document}
%</driver>
% \fi
%
% \CheckSum{131}
%
% \CharacterTable
%   {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%    Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%    Digits        \0\1\2\3\4\5\6\7\8\9
%    Exclamation   \!     Double quote  \"     Hash (number) \#
%    Dollar        \$     Percent       \%     Ampersand     \&
%    Acute accent  \'     Left paren    \(     Right paren   \)
%    Asterisk      \*     Plus          \+     Comma         \,
%    Minus         \-     Point         \.     Solidus       \/
%    Colon         \:     Semicolon     \;     Less than     \<
%    Equals        \=     Greater than  \>     Question mark \?
%    Commercial at \@     Left bracket  \[     Backslash     \\
%    Right bracket \]     Circumflex    \^     Underscore    \_
%    Grave accent  \`     Left brace    \{     Vertical bar  \|
%    Right brace   \}     Tilde         \~}
%
% \changes{v1.0.0}{2014/02/23}{Initial Version}
% \changes{v1.0.1}{2014/09/08}{Bugfix: Collapsible bbox (label placement for
% vectors)}
% \changes{v1.0.2}{2015/03/20}{Bugfix: Bbox had a linewidth/2 offset}
% \changes{v1.0.3}{2015/11/18}{Introduced |diag| option}
% \changes{v1.1.0}{2015/11/26}{Separate lower and upper banding, externalization
% control, fixed matrix style collection, lots of simplifications, moved
% ``every'' keys to |/drawmatrix| path}
% \changes{v1.1.1}{2016/01/29}{Bugfix: Remove extra space after vectors}
% \changes{v1.2.0}{2016/08/25}{Added coordinate transformations}
% \changes{v1.3.0}{2016/11/12}{Added label base (shifted exponents)}
% \changes{v1.4.0}{2016/12/20}{Added exponenet shortcut}
% \changes{v1.5.0}{2017/05/05}{Moved code to keys, added hooks, updated
% documentation}
%
%
% \GetFileInfo{drawmatrix.sty}
%
% \title{The \textsf{drawmatrix} package}
% \author{Elmar Peise \\ \texttt{peise@aices.rwth-aachen.de}}
% \date{\filedate \ \fileversion}
%
% \newcommand\TikZ{Ti{\it k}Z\xspace}
%
% \maketitle
%
% \begin{abstract}
%   \textsf{drawmatrix} provides macros to visually represent matrices.  Various
%   options allow to change the visualizations, e.g., drawing rectangular,
%   triangular, or banded matrices.
% \end{abstract}
%
% \tableofcontents
%
% \input{userdoc}
%
% \section{Implementation}
%
% \DoNotIndex{
%   \dm@bboxheight, \dm@bboxwidth, \dm@currname, \dm@currval, \dm@height,
%   \dm@labelbase, \dm@labeltextouter, \dm@labeltext, \dm@lowerbandwidth,
%   \dm@minsize, \dm@offsetheight, \dm@offsetwidth, \dm@upperbandwidth,
%   \dm@width, \dm@zero, \RequirePackage, \begin, \def, \edef, \else, \end,
%   \expandafter, \fi, \filldraw, \ifdrawmatrix@externalize, \ifmmode, \ifx,
%   \let, \newcommand, \newif, \node, \path, \pgfkeys, \pgfkeysalso,
%   \pgfkeyscurrentname, \pgfkeyscurrentvalue, \pgfkeysnovalue, \pgfkeysvaueof,
%   \pgflinewidth, \pgfgetlastxy, \pgfmathsetlengthmacro, \pgfresetboundingbox,
%   \pgfqkeys, \phantom, \tikz@library@external@loaded, \tikzset, \undefined,
% }
%
% This section describes the implementation details of the \textsf{drawmatrix}
% package.
%
% \subsection{Package: \TikZ}
%
% The \textsf{tikz} package is used for drawing.
%    \begin{macrocode}
\RequirePackage{tikz}
%    \end{macrocode}
%
% \subsection{If for externalization}
%
% \TeX{} |if| representing whether to explicitly disable \TikZ externalization.
%    \begin{macrocode}
\newif\ifdrawmatrix@externalize
%    \end{macrocode}
%
% \subsection{Key Declarations and Defaults}
%
% We rely on PGF keys as much as we can.
%    \begin{macrocode}
\pgfkeys{
%    \end{macrocode}
%
% Everything happens in the path |/drawmatrix|.
%    \begin{macrocode}
    drawmatrix/.is family,
    drawmatrix/.cd,
%    \end{macrocode}
%
%   |picture| is the style for the |\tikzpicture| in which the matrix is drawn.
%   |baseline| sets the baseline of the picture to a named coordinate of the
%   matrix (default: base of the label).
%    \begin{macrocode}
    picture/.style={},
    path/.style={},
    baseline/.style={picture/.append style={baseline=(drawmatrix #1)}},
    scale/.style={path/.append style={scale=#1}},
    x/.style={path/.append style={x=#1}},
    y/.style={path/.append style={y=#1}},
    baseline=label.base,
%    \end{macrocode}
%
%   |bbox| is the style of the bounding box, to which |bbox style| appends keys.
%    \begin{macrocode}
    bbox/.style={},
    bbox style/.style={bbox/.append style={#1}},
%    \end{macrocode}
%
%   |bbox height| and |bbox width| don't have default values.  |bbox size| sets
%   them both to the same value.
%    \begin{macrocode}
    bbox height/.initial,
    bbox width/.initial,
    bbox size/.style={bbox height=#1, bbox width=#1},
%    \end{macrocode}
%
%   |offset height| and |offset width| are |0| by default. |offset| sets them
%   both to the same value.
%    \begin{macrocode}
    offset height/.initial=0,
    offset width/.initial=0,
    offset/.style={offset height=#1, offset width=#1},
%    \end{macrocode}
%
%   |width| and |height| are |1| (\TikZ unit) by default. |size| sets them both
%   to the same value.
%    \begin{macrocode}
    height/.initial=1,
    width/.initial=1,
    size/.style={height=#1, width=#1},
%    \end{macrocode}
%
%   The |lower bandwidth| and |upper bandwidth| don't have default values.
%   |bandwidth| sets them both to the same value.
%    \begin{macrocode}
    lower bandwidth/.initial,
    upper bandwidth/.initial,
    bandwidth/.style={lower bandwidth=#1, upper bandwidth=#1},
%    \end{macrocode}
%
%   |lower banded| and |upper banded| are shortcuts to set the corresponding
%   bandwidths to the default value of |0.3| (\TikZ units). |banded| sets them
%   both.
%    \begin{macrocode}
    lower banded/.style={lower bandwidth=.3},
    upper banded/.style={upper bandwidth=.3},
    banded/.style={lower banded, upper banded},
%    \end{macrocode}
%
%   |lower| and |upper| are implemented by setting the opposite bandwidth to
%   |0|. |diag| sets them both.
%    \begin{macrocode}
    lower/.style={upper bandwidth=0},
    upper/.style={lower bandwidth=0},
    diag/.style={bandwidth=0},
%    \end{macrocode}
%
%   |label| is the style for the label with the text |label text|. |label pos|
%   sets the label at a named coordinate of the matrix (default: center of the
%   bounding box).  |label anchor| sets the label's |anchor| (default: in the
%   middle).
%    \begin{macrocode}
    label text/.initial,
    label/.style={},
    label pos/.style={label/.append style={at=(drawmatrix #1)}},
    label pos=bbox.center,
    label anchor/.style={label/.append style={anchor=#1}},
    label anchor=mid,
%    \end{macrocode}
%
%  |label base| and |label base anchor| allow to ofset labels with exponents.
%    \begin{macrocode}
    label base/.initial,
    label outer/.style={},
    label base anchor/.style={label outer/.append style={
        anchor=#1, at=(drawmatrix label.#1)
    }},
    label base anchor=base west,
%    \end{macrocode}
%
%   |exponent| is a shortcut to add an expontent to the label text without using
%   the |label base|.
%    \begin{macrocode}
    exponent/.style={
        label base/.expanded=\pgfkeysvalueof{/drawmatrix/label text},
        label text/.append=^{#1}
    },
%    \end{macrocode}
%
% Unknown keys are collected in |/drawmatrix/drawmatrix|.
%    \begin{macrocode}
    drawmatrix/.style={},
    .unknown/.code={%
        \let\dm@currname\pgfkeyscurrentname%
        \let\dm@currval\pgfkeyscurrentvalue%
        \ifx#1\pgfkeysnovalue\pgfkeysalso{
            drawmatrix/.append style/.expand once={\dm@currname}
        }\else\pgfkeysalso{
            drawmatrix/.append style/.expand twice={%
                \expandafter\dm@currname\expandafter=\dm@currval%
            }
        }\fi%
    },
%    \end{macrocode}
%
%   The default style for matrices: |every picture| applies to all
%   |\tikzpicture|s the matrices are drawn in, |every bbox| applies to all
%   bounding boxes, |every drawmatrix| applies to the matrices themselves, and
%   |every label| applies to the labels.
%    \begin{macrocode}
    every picture/.style={},
    every bbox/.style={
        name=drawmatrix bbox,
        inner sep=0
    },
    every drawmatrix/.style={
        fill=white,
        draw=gray
    },
    every label/.style={
        name=drawmatrix label,
        outer sep=0,
        inner sep=0
    },
    every node/.style={
        name=drawmatrix matrix,
        outer sep=0,
        inner sep=0,
        anchor=north west,
        at=(drawmatrix north west)
    },
%    \end{macrocode}
%
%   |externalize| sets a \TeX{} if (default: |true| = behave as all pictures).
%    \begin{macrocode}
    externalize/.is if=drawmatrix@externalize,
    externalize=true,
%    \end{macrocode}
%
% \subsection{Hooks}
%   Hooks for inserting code at various points of the render.
%    \begin{macrocode}
    pre code/.code={},
    post setup code/.code={},
    pre coordinate code/.code={},
    post coordinate code/.code={},
    pre draw code/.code={},
    post draw code/.code={},
    pre label code/.code={},
    post label code/.code={},
    post code/.code={},
%    \end{macrocode}
%
% \subsection{Code Keys}
% The following keys contain the code that construct the drawmatrix.
%
% Prepare the label text and, if needed label outer text (for alignment).  This
% needs to be outside the tikzpicture to properly detect math mode.
%    \begin{macrocode}
    setup label code/.code={
    \ifmmode\edef\dm@labeltext{$\dm@labeltext$}\fi%
    \expandafter\ifx\dm@labelbase\pgfkeysnovalue\else%
        \let\dm@labeltextouter\dm@labeltext%
        \edef\dm@labelbase{%
            \ifmmode$\dm@labelbase$\else\dm@labelbase\fi%
        }%
        \def\dm@labeltext{\phantom{\dm@labelbase}}%
    \fi%
    },
%    \end{macrocode}
%
% Disable externalization if |externalize=false|.
%    \begin{macrocode}
    externalization code/.code={
        \ifdrawmatrix@externalize\else%
            \ifx\tikz@library@external@loaded\undefined\else%
                \tikzset{external/export=false}%
            \fi%
        \fi%
    },
%    \end{macrocode}
%
% Parse width, height, the minimum dimension and zero for comparison purposes.
%    \begin{macrocode}
    setup sizes code/.code={
        \path[/drawmatrix/path] (\dm@width, \dm@height);
        \pgfgetlastxy\dm@width\dm@height
        \path[/drawmatrix/path] (\dm@offsetwidth, \dm@offsetheight);
        \pgfgetlastxy\dm@offsetwidth\dm@offsetheight
        \pgfmathsetlengthmacro\dm@minsize{min(\dm@width, \dm@height)}
        \pgfmathsetlengthmacro\dm@zero{0.0}
%    \end{macrocode}
%
% Prepare the band widths:  First, if the matrix is not banded, the bandwidth is
% set to the smaller matrix dimension.  Then, the band width is limited by this
% smaller dimension.
%    \begin{macrocode}
        \expandafter\ifx\dm@lowerbandwidth\pgfkeysnovalue
            \def\dm@lowerbandwidth{\dm@minsize}
        \else
            \path[/drawmatrix/path] (\dm@lowerbandwidth, 0);
            \pgfgetlastxy\dm@lowerbandwidth\dm@zero
        \fi
        \expandafter\ifx\dm@upperbandwidth\pgfkeysnovalue
            \def\dm@upperbandwidth{\dm@minsize}
        \else
            \path[/drawmatrix/path] (0, \dm@upperbandwidth);
            \pgfgetlastxy\dm@zero\dm@upperbandwidth
        \fi
        \pgfmathsetlengthmacro\dm@lowerbandwidth{
            min(\dm@minsize, \dm@lowerbandwidth)
        }
        \pgfmathsetlengthmacro\dm@upperbandwidth{
            min(\dm@minsize, \dm@upperbandwidth)
        }
%    \end{macrocode}
%
% Set the default bounding box size.
%    \begin{macrocode}
        \expandafter\ifx\dm@bboxheight\pgfkeysnovalue
            \pgfmathsetlengthmacro\dm@bboxheight{
                \dm@height + \dm@offsetheight
            }
        \else
            \path[/drawmatrix/path] (0, \dm@bboxheight);
            \pgfgetlastxy\dm@zero\dm@bboxheight
        \fi
        \expandafter\ifx\dm@bboxwidth\pgfkeysnovalue
            \pgfmathsetlengthmacro\dm@bboxwidth{
                \dm@width + \dm@offsetwidth
            }
        \else
            \path[/drawmatrix/path] (\dm@bboxwidth, 0);
            \pgfgetlastxy\dm@bboxwidth\dm@zero
        \fi
    },
%    \end{macrocode}
%
% Reset the bounding box and begin with (drawing) the path for the bounding box.
%    \begin{macrocode}
    bbox code/.code={
        \pgfresetboundingbox
        \node[/drawmatrix/every bbox, /drawmatrix/bbox,
            minimum height=\dm@bboxheight,
            minimum width=\dm@bboxwidth] {};
    },
%    \end{macrocode}
%
% Whether needed or not, declare all matrix corners.
%    \begin{macrocode}
    coordinate code/.code={
        \path (drawmatrix bbox.north west)
            ++(\dm@offsetwidth, -\dm@offsetheight)
            ++(.5\pgflinewidth, -.5\pgflinewidth)
            coordinate (drawmatrix north west)
            ++(\dm@width, 0)
            +(-\dm@minsize + \dm@upperbandwidth, 0)
            coordinate (drawmatrix north)
            +(0, -\dm@minsize + \dm@upperbandwidth)
            coordinate (drawmatrix east)
            ++(0, -\dm@height)
            coordinate (drawmatrix south east)
            ++(-\dm@width, 0)
            +(\dm@minsize - \dm@lowerbandwidth, 0)
            coordinate (drawmatrix south)
            +(0, \dm@minsize - \dm@lowerbandwidth)
            coordinate (drawmatrix west);
    },
%    \end{macrocode}
%
% Add an invisible node the size of the matrix.
%    \begin{macrocode}
    node code/.code={
        \node[/drawmatrix/every node,
            minimum height=\dm@height,
            minimum width=\dm@width] {};
    },
%    \end{macrocode}
%
% Now, draw only what is needed of the matrix.  Otherwise path modifications
% (e.g., such as rounded corners) might not work.
%    \begin{macrocode}
    draw code/.code={
        \filldraw[/drawmatrix/every drawmatrix, /drawmatrix/drawmatrix]
            (drawmatrix north west)
            \ifx\dm@upperbandwidth\dm@zero
                \ifx\dm@width\dm@minsize\else -- (drawmatrix north) \fi
                \ifx\dm@height\dm@minsize\else -- (drawmatrix east) \fi
            \else
                -- (drawmatrix north)
                \ifx\dm@upperbandwidth\dm@minsize\else
                    -- (drawmatrix east)
                \fi
            \fi
            -- (drawmatrix south east)
            \ifx\dm@lowerbandwidth\dm@zero
                \ifx\dm@width\dm@minsize\else -- (drawmatrix south) \fi
                \ifx\dm@height\dm@minsize\else -- (drawmatrix west) \fi
            \else
                -- (drawmatrix south)
                \ifx\dm@lowerbandwidth\dm@minsize\else
                    -- (drawmatrix west)
                \fi
            \fi
            -- cycle;
    },
%    \end{macrocode}
%
% The label.
%    \begin{macrocode}
    label code/.code={
        \node[/drawmatrix/every label, /drawmatrix/label]
            {\dm@labeltext};
        \expandafter\ifx\dm@labelbase\pgfkeysnovalue\else
            \node[/drawmatrix/every label, /drawmatrix/label,
                  /drawmatrix/label outer] {\dm@labeltextouter};
        \fi
    }
}
%    \end{macrocode}
%
% \subsection{User Macros}
%
% \refCom{drawmatrixset} as a simple shortcut like |\tikzset|.
%    \begin{macrocode}
\newcommand\drawmatrixset[1]{\pgfqkeys{/drawmatrix}{#1}}
%    \end{macrocode}
%
% Here we go, the main thing: \refCom{drawmatrix}. First, apply the options and
% extract the sizes from the PGF keys.
%    \begin{macrocode}
\newcommand\drawmatrix[2][]{{%
    \drawmatrixset{
        label text={#2},
        #1,
        label text/.get=\dm@labeltext,
        height/.get=\dm@height,
        width/.get=\dm@width,
        lower bandwidth/.get=\dm@lowerbandwidth,
        upper bandwidth/.get=\dm@upperbandwidth,
        offset height/.get=\dm@offsetheight,
        offset width/.get=\dm@offsetwidth,
        bbox height/.get=\dm@bboxheight,
        bbox width/.get=\dm@bboxwidth,
        label base/.get=\dm@labelbase,
        pre code,
        setup label code,
        externalization code
    }%
    \begin{tikzpicture}[/drawmatrix/every picture, /drawmatrix/picture]
        \drawmatrixset{
            setup sizes code, 
            post setup code,
            bbox code,
            pre coordinate code, 
            coordinate code, 
            post coordinate code,
            node code,
            pre draw code, 
            draw code, 
            post draw code,
            pre label code, 
            label code, 
            post label code
        }
    \end{tikzpicture}%
    \drawmatrixset{post code}%
}}
%    \end{macrocode}
%
% \Finale
% \printindex
% \PrintChanges
%
\endinput