A. Shchepin
                                                             Process-One
                                                                 M. Rose
                                            Dover Beach Consulting, Inc.
                                                              S. Golovan
                                                     New Economic School
                                                               M. Litvak
                                                           Colocall Ltd.
                                                            K. Khomoutov
                                                             Service 007
                                                            June 8, 2008


                             Tkabber 0.11.0


Abstract

   _Tkabber_ is an open source Jabber client, written in _Tcl/Tk_.  This
   memo describes the installation, configuration, and extension of
   _Tkabber_.






























Shchepin, et al.                                                [Page 1]

                             Tkabber 0.11.0                    June 2008


Table of Contents

   1.  Features . . . . . . . . . . . . . . . . . . . . . . . . . . .  4
   2.  Requirements . . . . . . . . . . . . . . . . . . . . . . . . .  7
   3.  Download, install and run  . . . . . . . . . . . . . . . . . . 10
   4.  Upgrading from version 0.10.0  . . . . . . . . . . . . . . . . 12
     4.1.  Configuration options  . . . . . . . . . . . . . . . . . . 12
       4.1.1.  Proxy servers  . . . . . . . . . . . . . . . . . . . . 12
       4.1.2.  Resources to control fonts . . . . . . . . . . . . . . 13
       4.1.3.  Keep-alives and dead link detection  . . . . . . . . . 13
       4.1.4.  Resources to control appearance of balloon windows . . 14
       4.1.5.  Support for external XML parser  . . . . . . . . . . . 14
     4.2.  User interface . . . . . . . . . . . . . . . . . . . . . . 14
       4.2.1.  System tray icon mouse gestures  . . . . . . . . . . . 15
       4.2.2.  New tab management widget  . . . . . . . . . . . . . . 15
       4.2.3.  Window splitters . . . . . . . . . . . . . . . . . . . 15
   5.  Upgrading from version 0.9.9 . . . . . . . . . . . . . . . . . 16
   6.  Configuration  . . . . . . . . . . . . . . . . . . . . . . . . 17
     6.1.  Pre-load . . . . . . . . . . . . . . . . . . . . . . . . . 19
       6.1.1.  Tabbed Interface . . . . . . . . . . . . . . . . . . . 20
       6.1.2.  Fonts and colors . . . . . . . . . . . . . . . . . . . 20
       6.1.3.  Cryptography by default  . . . . . . . . . . . . . . . 22
       6.1.4.  Using of external XML parser from tDOM . . . . . . . . 22
       6.1.5.  Debugging Output . . . . . . . . . . . . . . . . . . . 22
       6.1.6.  Splash window  . . . . . . . . . . . . . . . . . . . . 23
       6.1.7.  I18n/L10n  . . . . . . . . . . . . . . . . . . . . . . 23
       6.1.8.  Searching  . . . . . . . . . . . . . . . . . . . . . . 23
     6.2.  Post-load  . . . . . . . . . . . . . . . . . . . . . . . . 24
       6.2.1.  Look-and-Feel  . . . . . . . . . . . . . . . . . . . . 27
       6.2.2.  The Autoaway Module  . . . . . . . . . . . . . . . . . 28
       6.2.3.  The Avatar Module  . . . . . . . . . . . . . . . . . . 29
       6.2.4.  The Chat Module  . . . . . . . . . . . . . . . . . . . 29
       6.2.5.  The Clientinfo Module  . . . . . . . . . . . . . . . . 29
       6.2.6.  The Conferenceinfo Module  . . . . . . . . . . . . . . 29
       6.2.7.  The Cryptographic Module . . . . . . . . . . . . . . . 30
       6.2.8.  The Emoticons Module . . . . . . . . . . . . . . . . . 30
       6.2.9.  The File Transfer Module . . . . . . . . . . . . . . . 30
       6.2.10. The Groupchat Module . . . . . . . . . . . . . . . . . 31
       6.2.11. The Ispell Module  . . . . . . . . . . . . . . . . . . 31
       6.2.12. The Stream Initiation Module . . . . . . . . . . . . . 32
       6.2.13. The Logger Module  . . . . . . . . . . . . . . . . . . 32
       6.2.14. The Login Module . . . . . . . . . . . . . . . . . . . 32
       6.2.15. The Message Module . . . . . . . . . . . . . . . . . . 34
       6.2.16. The Raw XML Input Module . . . . . . . . . . . . . . . 34
       6.2.17. The Roster Module  . . . . . . . . . . . . . . . . . . 34
       6.2.18. The Sound Module . . . . . . . . . . . . . . . . . . . 34
     6.3.  Menu-load  . . . . . . . . . . . . . . . . . . . . . . . . 36
       6.3.1.  The Avatar Module  . . . . . . . . . . . . . . . . . . 37



Shchepin, et al.                                                [Page 2]

                             Tkabber 0.11.0                    June 2008


       6.3.2.  The Browser Module . . . . . . . . . . . . . . . . . . 37
       6.3.3.  The Groupchat Module . . . . . . . . . . . . . . . . . 37
       6.3.4.  The Login Module . . . . . . . . . . . . . . . . . . . 37
       6.3.5.  The Message Module . . . . . . . . . . . . . . . . . . 37
       6.3.6.  The Presence Module  . . . . . . . . . . . . . . . . . 37
       6.3.7.  Miscellany . . . . . . . . . . . . . . . . . . . . . . 38
     6.4.  Final-Load . . . . . . . . . . . . . . . . . . . . . . . . 38
   7.  Extensibility  . . . . . . . . . . . . . . . . . . . . . . . . 40
     7.1.  Chat Hooks . . . . . . . . . . . . . . . . . . . . . . . . 41
     7.2.  Login Hooks  . . . . . . . . . . . . . . . . . . . . . . . 43
     7.3.  Presence Hooks . . . . . . . . . . . . . . . . . . . . . . 43
     7.4.  Roster Hooks . . . . . . . . . . . . . . . . . . . . . . . 44
     7.5.  Miscellaneous Hooks  . . . . . . . . . . . . . . . . . . . 45
   8.  User Interface basics  . . . . . . . . . . . . . . . . . . . . 46
     8.1.  Searching  . . . . . . . . . . . . . . . . . . . . . . . . 46
   Appendix A.  Releases History  . . . . . . . . . . . . . . . . . . 48
     A.1.  Main changes in 0.11.0 . . . . . . . . . . . . . . . . . . 48
     A.2.  Main changes in 0.10.0 . . . . . . . . . . . . . . . . . . 49
     A.3.  Main changes in 0.9.9  . . . . . . . . . . . . . . . . . . 49
     A.4.  Main changes in 0.9.8  . . . . . . . . . . . . . . . . . . 50
     A.5.  Main changes in 0.9.7beta  . . . . . . . . . . . . . . . . 50
     A.6.  Main changes in 0.9.6beta  . . . . . . . . . . . . . . . . 51
     A.7.  Main changes in 0.9.5beta  . . . . . . . . . . . . . . . . 51
   Appendix B.  Tk option database resources  . . . . . . . . . . . . 52
   Appendix C.  Documentation TODO  . . . . . . . . . . . . . . . . . 56
   Appendix D.  Acknowledgements  . . . . . . . . . . . . . . . . . . 57
   Appendix E.  Copyrights  . . . . . . . . . . . . . . . . . . . . . 58
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 59























Shchepin, et al.                                                [Page 3]

                             Tkabber 0.11.0                    June 2008


1.  Features

   Tkabber [1] provides a _Tcl/Tk_ interface to the Jabber/XMPP [2]
   instant messaging and presence service.

   _Tcl/Tk_ is a graphical scripting language that runs on the Unix,
   Windows, and Macintosh platforms.  The choice of _Tcl/Tk_ for a
   Jabber client is three-fold:

   o  it is portable: once you install a _Tcl/Tk_ interpreter on your
      system, the _Tkabber_ script "just runs" -- without having to
      compile anything;

   o  it is customizable: _Tkabber_ reads a configuration file when it
      starts that tells it the settings of various parameters; and,

   o  it is extensible: the configuration file is actually a _Tcl_
      script, so you can replace or augment entire portions of _Tkabber_
      (if you're so inclined).

   _Tkabber_ is fully-featured:

   sessions:

      *  TCP and HTTP-polling session transports

      *  XMPP SRV and TXT DNS-records handling

      *  hashed passwords

      *  SASL authentication

      *  encrypted sessions (if you install an optional extension)

      *  compressed sessions (if you install an optional extension)

      *  login via SOCKS4a, SOCKS5 or HTTPS proxy

      *  user-defined hooks for connection establishment and release

      *  XMPP/Jabber MIME type

   messages:

      *  privacy rules

      *  signed/encrypted messages (if you install an optional
         extension)



Shchepin, et al.                                                [Page 4]

                             Tkabber 0.11.0                    June 2008


      *  file transfers (HTTP, SOCKS bytestream, DTCP and IBB
         transports)

      *  groupchat (GroupChat-1.0 and Multi-User Chat conferencing
         protocols)

      *  headline messages

      *  message events

      *  completions of nick and commands

      *  hyperlinks

      *  emoticons

      *  user-defined hooks for chat window events

   presence:

      *  signed presence (if you install an optional extension)

      *  avatars

      *  browsing

      *  groupchat and roster invitations

      *  conference room bookmarks

      *  annotations about roster items

      *  vCards

      *  user-defined hooks for presence changes

   windowing:

      *  configurable look-and-feel via a resources database

      *  unicode

      *  tabbed/non-tabbed interface

      *  sound notifications

      *  nested roster groups




Shchepin, et al.                                                [Page 5]

                             Tkabber 0.11.0                    June 2008


      *  for Unix: auto-away, spell checking, KDE or freedesktop
         docking, and WMaker icons

      *  for Windows: auto-away, and taskbar icons















































Shchepin, et al.                                                [Page 6]

                             Tkabber 0.11.0                    June 2008


2.  Requirements

   You should already have installed:

   o  Tcl/Tk version 8.3.3 [3] (or later, Tcl/Tk 8.4.9 or later is
      recommended)

   o  tcllib version 1.2 [4] (or later, tcllib 1.8 or later is required
      for SRV and TXT DNS-records support).

   o  BWidget 1.3 [4] (or later)

   Most systems already come with these packages pre-installed.  If not,
   various Unix systems have them available as ready-made packages.
   Otherwise, go to the URLs above and click on the appropriate download
   link for your system.  Both _tcllib_ and _BWidget_ are script
   libraries -- no compiling is necessary.  In the case of _Tcl/Tk_,
   there are many ready-made binary packages available on the download
   site.

   The ActiveTcl [5] distribution contains all three packages (along
   with the _Img_ package mentioned next); so, you may want to use that
   instead of three separate downloads.

   At your discretion, there are several optional packages that you may
   also install. _Tkabber_ will run just fine without them, but if
   they're available _Tkabber_ will make additional features available
   to you.  So, here's the list:

   o  _Tcl/Tk_ supports only a small number of image formats (i.e.,
      bitmaps, GIFs and portable pixmaps).  If presence information
      contains avatars, these may be in other formats (e.g., PNGs or
      JPGs).
      Accordingly, you may want to install Img version 1.2 [6] (or
      later).  This package works on both Unix and Windows.


   o  By default, Tkabber uses pure-Tcl XML parser.  If its performance
      is insufficient, you may want to install tDOM version 0.8.0 [7]
      (or later) and use expat based XML parser.

   o  By default, communications between the server and client take
      place over a plaintext connection.  While this may not be a
      problem in some local, wired environments, if your server is
      distant or your client is wireless, then you may want to encrypt
      all the client/server traffic.
      Accordingly, you may to install tls version 1.4.1 [8] (or later).
      This package works on both Unix and Windows.  Note that if you're



Shchepin, et al.                                                [Page 7]

                             Tkabber 0.11.0                    June 2008


      using Unix, then you'll also need to have _OpenSSL_ installed.
      Fortunately, this comes preinstalled on many Unix systems.  If
      it's not on your system, check OpenSSL source page [9].  (The
      Windows distribution of _tls_ comes with all the necessary DLLs.)


   o  Another option in Unix is to compress connection between client
      and server (it currently disables encryption).
      If you want to compress traffic you should install ZTcl version
      1.0b4 [10] (or later) and Tclmore version 0.7b1 [10] (or later).
      (At the time of 0.11.0 release _ZTcl_ and _Tclmore_ home page were
      unavailable, so you may grab them from a mirror [11].)


   o  By default, end-to-end communications between two or more Jabber
      clients is plaintext.  Depending on your environment, this may not
      be a problem for you.  Alternatively, you may want to digitally-
      sign all of your outgoing messages, and allow others to encrypt
      their messages to you.
      Accordingly, you may want to install the _gpgme_ package, which,
      at present, works only on Unix.  Depending on what's already
      installed on your system, you may have to download upto three
      files:

      *  Tcl GPGME version 1.0 [12] (or later);

      *  GPGME version 0.3.11 [13] (or later but only 0.3.x); and,

      *  GPG version 1.0.7 [14] (or later).


   o  If you're running Unix or Windows, then you may want _Tkabber_ to
      automatically mark you as away after a priod of inactivity.
      Accordingly (if you're using _Tcl/Tk_ 8.3 or 8.4), on Unix, you
      may want to install Tk Xwin version 1.0 [15] (or later), whilst on
      WIndows, you may want to install Tcl Winidle version 0.1 [16] (or
      later).

   o  Users of _Tcl/Tk_ 8.5 don't have to use external packages to
      measure their idle time.


   o  If you're running Unix, then you may want _Tkabber_ to use the
      docking tray.
      Accordingly, you may want to install Tk Theme version 1.20 [17]
      (or later) for _KDE_ icon, or tktray version 1.1 [18] (or later)
      for freedesktop icon (supported by modern _KDE_ and _GNOME_).




Shchepin, et al.                                                [Page 8]

                             Tkabber 0.11.0                    June 2008


   o  If you're running Windows, then you may want _Tkabber_ to use the
      system tray.
      Accordingly, you may want to install Winico version 0.6 [19] (or
      later).


   o  If you're a Tcl/Tk guru, then you may want to access the Tk
      console to debug things.
      Accordingly, you may want to install tkcon version 2.3 [20] (or
      later).

   Please keep in mind that these are all "optional extras" -- if
   they're not right for you or your environment, don't bother with
   them!





































Shchepin, et al.                                                [Page 9]

                             Tkabber 0.11.0                    June 2008


3.  Download, install and run

   Latest stable version is 0.11.0 and available at
   http://tkabber.jabber.ru/download.

   Older versions can be found at http://files.jabber.ru/tkabber/.

   You can always find the latest development version via SVN.  Execute
   the following command:

   svn co https://svn.xmpp.ru/repos/tkabber/trunk/tkabber

   And if you want to test some plugins, then do

   svn co https://svn.xmpp.ru/repos/tkabber/trunk/tkabber-plugins

   If you use the Debian GNU/Linux distribution, you may want to get all
   required packages by using _apt_.  Just execute

   apt-get install tk tcllib bwidget

   or

   apt-get install tkabber

   to get the version included into Debian repository.

   No real installation is required, simply copy the "tkabber/"
   directory to a commonly-available area, and then either:

   o  put this directory in your search-path; or,

   o  make a calling script/shortcut to the file "tkabber.tcl" in that
      directory.

   Although _Tkabber_ comes with a Makefile, there's really not much to
   do -- most folks prefer to simply copy the distribution directory to
   somewhere in their home directory.

   From the shell, you can invoke _Tkabber_ as:

   % tkabber.tcl

   whilst on a windowing system, simply double-click on that file or a
   short-cut to it.






Shchepin, et al.                                               [Page 10]

                             Tkabber 0.11.0                    June 2008


   If you're a Tcl/Tk guru and have installed _tkcon_, then you may want
   to invoke _Tkabber_ as:

   % tkcon.tcl -exec "" -root .tkconn -main "source tkabber.tcl"

   _Tkabber_ will automatically know that it's running under _tkcon_ and
   will start by hiding the _Tk_ console window.  Look under the "Help"
   menu to find the checkbutton to show the console.

   Also you can setup _Tkabber_ as handler for XMPP/Jabber MIME
   Type [21].  For this you need to set hanler for
   "application/xmpp+xml" MIME type in your browser to something like
   this:

   tkabber -mime %s




































Shchepin, et al.                                               [Page 11]

                             Tkabber 0.11.0                    June 2008


4.  Upgrading from version 0.10.0

   When upgrading _Tkabber_ from version 0.10.0 or earlier note that
   several configuration options and user interface elements have been
   changed.

4.1.  Configuration options

   There are notable changes in handling connection through proxy
   servers, managing fonts and balloon colors, and detecting breaks in
   underlying TCP connection to a server.

4.1.1.  Proxy servers

   Since SOCKS4 and SOCKS5 proxy types were implemented in addition to
   HTTP proxy type, the whole set of connection options regarding proxy
   servers has been changed.  This means that after upgrade the old
   values stored using the Customize mechanism will be lost and the same
   values in "loginconf" arrays will not be recognized any longer.

   If you do not use HTTP proxy, you can skip this section because these
   changes will not affect you.

   If your options are set using the _Customize_ interface, write down
   values for options relevant to proxy server from the "Login" group of
   _Customize_ settings, then after upgrade visit this group of
   settings, select "HTTPS" for the option "::loginconf(proxy)" and then
   fill in the rest of relevant settings with recorded values.  As
   usual, save each setting after you change them.  Do not be surprised
   with the word "HTTPS" (which stands for "HTTP over SSL").  It just
   means that _Tkabber_ will use CONNECT method to tunnel TCP connection
   through a proxy.

   If you maintain "loginconf" arrays in config.tcl, you have to modify
   each array using this scheme:

   o  Rename variable "useproxy", if present, to just "proxy" and change
      its value to either "https" if "useproxy" was set to true or to
      "none" (yes, the word "none", do not leave it empty) if it was set
      to false.

   o  Modify existing variables in these arrays using this map:

      *  Rename "httpproxy" to "proxyhost".

      *  Rename "httpport" to "proxyport".





Shchepin, et al.                                               [Page 12]

                             Tkabber 0.11.0                    June 2008


      *  Rename "httplogin" to "proxyusername".

      *  Rename "httppassword" to "proxypassword".

4.1.2.  Resources to control fonts

   Fonts handling has been partially reworked: the global variable
   "font" that controls chat and roster fonts has been removed and now
   _Tkabber_ relies on _Tk_ option database to manage these settings.
   You can override roster and chat fonts independently of each other.
   To do that on systems not based on X Window use _Customize_ options
   described below.

   The main consequence of this change is that now the fonts are taken
   from _Tk_ option database and if it contains sane values you don't
   need to touch anything (until the update you had to tweak the "font"
   variable because it was set to font "fixed" by default).  The
   variable "font" does not have any special meaning starting from
   0.11.0 release.

   The second consequence is that you are now able to set fonts for chat
   and roster windows separately from each other using this list as a
   reference:

   o  "*font" _Tk_ option database resource sets default font for all
      widgets used in _Tkabber_.

   o  "*Chat*Text.font" _Tk_ option database resource can be used to
      override font used for chat windows.  This resource can be
      overridden by the "::ifacetk::options(font)" option from the "Main
      Interface" group of _Customize_ settings.

   o  "*Roster*font" _Tk_ option database resource can be used to
      override font used for roster windows.  This resource can be
      overridden by the "::ifacetk::options(roster_font)" option from
      the "Main Interface" group of _Customize_ settings.

4.1.3.  Keep-alives and dead link detection

   Keep-alive mechanism that was used to keep NATP devices from
   disconnecting idle XMPP sessions was accompanied in 0.10.0 with "XMPP
   ping" mechanism which also implemented dead link detection with
   support for disconnecting upon detection of network outage.

   In version 0.11.0, the old keep-alive mechanism has been dropped, so
   the following two global options have no effect now:





Shchepin, et al.                                               [Page 13]

                             Tkabber 0.11.0                    June 2008


   o  "keep_alive"

   o  "keep_alive_interval"

   In order to get the same functionality, enable XMPP ping using these
   options in the "IQ" group of Customize settings:

   o  Enabling "::plugins::ping::options(ping)" will make _Tkabber_
      periodically send xmpp:ping IQ request to the server.

   o  Set "::plugins::ping::options(timeout)" option to a number of
      seconds _Tkabber_ should wait for either a xmpp:ping reply or an
      error to arrive from the server; if there is no answer from the
      server during this timeout, the socket for this connection will be
      forcibly disconnected.

4.1.4.  Resources to control appearance of balloon windows

   Resources controlling the appearance of balloon windows have been
   made more generic.  If you use custom _Tk_ option database settings
   for balloon windows, change the relevant resources using this map:

   o  Change references to "*Balloon.background" and
      "*Balloon.foreground" resources to "*Balloon*background" and
      "*Balloon*foreground", respectively.

   o  Change references to "*Balloon*padX" and "*Balloon*padY" resources
      to "*Balloon.text.padX" and "*Balloon.text.padY", respectively.

4.1.5.  Support for external XML parser

   Support for _TclXML_ as an external XML parser has been removed
   (since _TclXML_ has anyway been unable to support partial XML
   processing) along with the global variable "use_external_tclxml"
   which controlled the loading of _TclXML_.

   Now expat-based _Tcl_ package _tDOM_ is supported as an external XML
   parser.  It can be enabled by loading it manually in config.tcl using
   the Tcl package command, for example:

   package require tdom

4.2.  User interface

   There are notable changes in systray mouse gestures, appearance of a
   main tabbed window, and in behavior of paned window splitters.





Shchepin, et al.                                               [Page 14]

                             Tkabber 0.11.0                    June 2008


4.2.1.  System tray icon mouse gestures

   Mouse gestures bound to system tray (system notification area) icon
   have been reworked:

   o  Single click on it with the left mouse button now unconditionally
      brings the main _Tkabber_ window to front, possibly deiconifying
      it first.

   o  Single click with the middle mouse button now unconditionally
      iconifies the main _Tkabber_ window.

   This differs from the previois behaviour where single click with the
   left mouse button on _Tkabber_'s system tray icon toggled the
   iconified/visible state of the main _Tkabber_ window.

4.2.2.  New tab management widget

   The _notebook_ widget which was used to render tabs in tabbed
   interface mode has been replaced with a new custom widget providing
   the ability for multi-row placement of tabs and docking them to the
   left or right sides of the chat window (in addition to top or bottom
   docking available in 0.10.0 version and earlier).

   If you adjusted any specific _Tk_ option database resources
   pertaining to that _notebook_ widget, you have to change them keeping
   in mind that the new widget is just a bunch of _Tk_ buttons (class
   "Button") placed in a frame (called ".nb" as before).  The class name
   for the new widget is "ButtonBar".

   So if you explicitly set, say "*Notebook*font" option, you have to
   change it to "*ButtonBar*font" and so on.

4.2.3.  Window splitters

   Window splitters (thin vertical and horizontal windows used to change
   relative sizes of windows between which a splitter is placed) have
   been changed to "Windows" style.  This differs from previous "Motif"
   style which implemented explicit "grip box" on each splitter which
   was the only "active point" of a splitter.











Shchepin, et al.                                               [Page 15]

                             Tkabber 0.11.0                    June 2008


5.  Upgrading from version 0.9.9

   When upgrading _Tkabber_ from version 0.9.9 or earlier note the
   following:

   o  On Macintosh or Microsoft Windows _Tkabber_ will copy it's
      configuration directory to a new location (see the next section
      (Section 6) for details).  If the transfer of the config directory
      goes smoothly you may delete old ""~/.tkabber"" directory and
      replace its name in your config file by "$::configdir".

   o  Also, _Tkabber_ will convert chatlogs directory to a new format.

   o  Also, _Tkabber_ changed the way it works with emoticons.  Instead
      of loading them in config file you may put you faivorite emoticons
      directory into "$::configdir/plugins" directory, restart Tkabber
      and then choose emoticons set using Customize GUI.


































Shchepin, et al.                                               [Page 16]

                             Tkabber 0.11.0                    June 2008


6.  Configuration

   _Tkabber_ maintains its configuration using a set of files placed in
   a special configuration directory which location depends on the
   operating system _Tkabber_ runs on.  These locations are:

   o  Unix systems: ""~/.tkabber"";

   o  Macintosh: ""~/Library/Application Support/Tkabber"";

   o  Under Microsoft Windows this location is governed by the policy of
      the particular flavor of this OS, but the general rule is that the
      _Tkabber_ configuration directory is named ""Tkabber"" and is
      located in the special system folder for storing application-
      specific data.  For example, under Windows XP this will be
      something like ""C:\Documents and Settings\USERNAME\Application
      Data\Tkabber"", where ""USERNAME"" is the login name of a
      particular operating system's user.

   _Tkabber_ also honors the value of the ""TKABBER_HOME"" environment
   variable -- if it exists the whole OS-based guessing of the
   configuration directory location is cancelled and the value of this
   environment variable is used instead.

   Once the pathname of the _Tkabber_ configuration directory is known,
   its value is assigned to the ""configdir"" global Tcl variable which
   can be accessed from within the main _Tkabber_ configuration file
   (see below).

   One of the first things that _Tkabber_ does when it's starting up is
   reading a file located in its configuration directory under the name
   ""config.tcl"".  This is a _Tcl_ source file, so obviously, it's a
   lot easier to maintain this file if you know the Tcl programming
   language.  If you're not familiar with it, that's okay -- most things
   you'll need to do are pretty simple!  (In fact, if you don't have
   your own configuration file, you'll get the vanilla _Tkabber_, which
   hopefully you'll find quite usable.)

   Note that almost all _Tkabber_ options can be cofigured using
   graphical interface (menu Tkabber->Customize), so editing
   configuration file is not strictly necessary.

   _Tkabber_ is configured in four stages:

   o  in the pre-load stage, configuration options which guide the
      loading process are set;





Shchepin, et al.                                               [Page 17]

                             Tkabber 0.11.0                    June 2008


   o  in the post-load stage, configuration options for each module are
      set;

   o  in the menu-load stage, the user is given an option to re-arrange
      _Tkabber's_ menu bar; and,

   o  the final-load stage allows any last changes to be made before the
      "login" dialog window is displayed to the user.

   Let's look at each, in turn.









































Shchepin, et al.                                               [Page 18]

                             Tkabber 0.11.0                    June 2008


6.1.  Pre-load

   There are a few things that you may let _Tkabber_ know immediately.
   These are:

   # tabbed interface

   set ifacetk::options(use_tabbar) 1


   # primary look-and-feel

   set load_default_xrdb 1

   option add *font \
          "-monotype-arial-medium-r-normal-*-13-*-*-*-*-*-iso10646-1" \
          userDefault


   # cryptography by default

   set ssj::options(sign-traffic)    0
   set ssj::options(encrypt-traffic) 0


   # using of external XML parser

   package require tdom 0.8


   # debugging output

   set debug_lvls {jlib warning}


   # splash window

   set show_splash_window 0


   # force english labels instead of native language

   ::msgcat::mclocale en








Shchepin, et al.                                               [Page 19]

                             Tkabber 0.11.0                    June 2008


6.1.1.  Tabbed Interface

   The first of these options, "ifacetk::options(use_tabbar)", tells
   _Tkabber_ whether you want a tabbed interface or not.  If not, here's
   what to put in your configuration file:

   set ifacetk::options(use_tabbar) 0

   Although _Tkabber_ immediately applies most of its configuration
   changes, in order to apply changed option
   "ifacetk::options(use_tabbar)" you have to restart _Tkabber_.  So,
   basically you have two options: set "ifacetk::options(use_tabbar)" at
   the beginning of your configuration file, or using graphical
   interface save the option and restart _Tkabber_.

6.1.2.  Fonts and colors

   Many aspects of the _Tkabber_'s visual appearance such as fonts,
   colors and geometry of windows can be configured using the Tk option
   database. [22]

   The corresponding _Tk_'s option [23] command can be used in the
   _Tkabber_'s configuration file in any acceptable way: from small
   tweaks to reading files containing elaborate sets of configuration
   commands; ready-to-use examples of such files are included in the
   distribution and are located under the "examples/xrdb" directory.

   The _Tk_ toolkit is able to initialize its option database from the
   _XRDB_ (X Resource Database) if its availability is detected at run
   time.  This means that any settings described here can be tuned via
   the standard XRDB mechanism (see "man xrdb").

   Beware though that the _Tk_'s semantics of matching option
   specifications against the option database differ in some subtle
   details from that of the _Xt_ toolkit.  The most notable one is the
   priority of options: _Tk_ prefers the latest option it sees, while
   _Xt_ prefers "the most specific" one.

   When specifying _Tkabber_-specific options in your _XRDB_ file use
   the "Tkabber" class as the root element of the options.

   See Appendix B for a list of all the resources that you can set to
   control _Tkabber's_ look-and-feel.








Shchepin, et al.                                               [Page 20]

                             Tkabber 0.11.0                    June 2008


   Probably the most commonly used way to configure _Tkabber_'s visual
   appearance (especially on Windows platforms which lack _XRDB_
   mechanism) is to put all the necessary settings in some file and then
   ask _Tk_ to update its option database from it, like this:

       set load_default_xrdb 0
       option readfile $::configdir/newlook.xrdb userDefault

   The first line tells _Tkabber_ not to load its default "xrdb" file,
   whilst the second line tells _Tkabber_ which file to load instead.
   Look at the provided example "xrdb" files to get the idea about how
   they are organised.  Of course, you can use any of that files as a
   template.  And of course, you can simply specify any of the example
   files instead of your own to the "option readfile" command to get the
   provided "theme".

   Alternatively, if you're a Tcl "old timer", you can always do:

       set load_default_xrdb 0
       tk_bisque

   to set the palette to a pleasing color scheme.  Read more about this
   in "man palette".

   You can also customize the fonts _Tkabber_ uses to render its user
   interface:

       option add *font \
              "-monotype-arial-medium-r-normal-*-13-*-*-*-*-*-iso10646-1" \
              userDefault

   The above setting (operating on the Tk option database) selects the
   font used for all UI elements like buttons and labels and roster and
   conversation windows.  Obviously, you should choose fonts that suit
   your taste.

   If you want to specify another font for roster labels use the
   following option:

       option add *Roster*font \
              "-misc-fixed-medium-r-normal-*-12-*-*-*-*-*-iso10646-1" \
              userDefault

   When picking fonts, observe these rules:

   o  Under X, encoding (charset) of fonts must match that of your
      locale.




Shchepin, et al.                                               [Page 21]

                             Tkabber 0.11.0                    June 2008


   o  Ensure that the specified font exists, since if it's not, _Tk_
      will try hard to pick the most suitable one which often yields not
      what you want.  (The best bet is to first pick the font using some
      tool like "xfontsel".)

   Note that when specifying settings using the _Tkabber_'s
   configuration files (i.e. not using _XRDB_ directly) you are not
   forced to use "X-style" (XLFD) font descriptions and may instead
   specify fonts using sometimes more convenient _Tk_ features described
   in Tk font manual page.

6.1.3.  Cryptography by default

   Next, you may want to _Tkabber_ to use cryptography by default.
   There are two options:

   o  whether the traffic you send should be digitally-signed; and,

   o  if you have cryptographic information for someone, should the
      default action be to encipher your traffic for them.

   (By defining these options early on, _Tkabber_ will complain
   immediately if it isn't able to load its cryptographic module;
   otherwise, the default behavior is to proceed without any
   cryptographic buttons, menus, and so on.)

6.1.4.  Using of external XML parser from tDOM

   By default for parsing XML _Tkabber_ uses (modified) _TclXML_ library
   that comes with it distribution.  This parser is pure-Tcl, and it
   performance can be not suitable.  Then you can install _tDOM_ with
   built-in _expat_ support and require it in the config file:

   package require tdom 0.8

6.1.5.  Debugging Output

   _Tkabber_ has a lot of debugging output.  By default, it gets printed
   to the standard output by a Tcl procedure called "debugmsg".
   However, only information about those modules listed in a variable
   called "debug_lvls" will be printed.










Shchepin, et al.                                               [Page 22]

                             Tkabber 0.11.0                    June 2008


   If you know how to program Tcl, then this will seem rather obvious:

   set debug_lvls [list message presence ssj warning]

   # if you want a different behavior,
   #     define your own...

   proc debugmsg {module msg} {
   #    ...
   }

   Most users won't care about "debugmsg" because they're running
   _Tkabber_ under an application launcher so the standard output is
   never seen.  However, if this isn't the case for you, and you just
   don't want to see any of this stuff, put this one line in your
   configuration file:

   set debug_lvls {}

6.1.6.  Splash window

   By default, when _Tkabber_ startup, it show loading process in splash
   window.  To disable this feature, put this in your configuration
   file:

   set show_splash_window 0

6.1.7.  I18n/L10n

   _Tkabber_ can show all messages in user's native language.  This is
   done by using Tcl's built-in _msgcat_ package which looks for a
   directory called "msgs/" wherever you installed _Tkabber_, and then
   uses the "LC_MESSAGES" environment variable (or "LANG" if
   "LC_MESSAGES" not set) to select the appropriate file.  If you wish,
   you can force use of a particular language by putting a line like
   this in your configuration file:

   ::msgcat::mclocale en

6.1.8.  Searching

   _Tkabber_ allows the user to perform textual searching in certain
   classes of its windows.  This searching is controlled by several
   settings which can be specified in this section.

   These settings are described in detail in Section 8.1.





Shchepin, et al.                                               [Page 23]

                             Tkabber 0.11.0                    June 2008


6.2.  Post-load

   After _Tkabber_ reads your configuration file, it loads all of its
   own modules, it then invokes a procedure called "postload".  This
   procedure is supposed to perform module-specific configuration.

   The default version of this procedure doesn't do anything.  If you
   want to configure one more module modules, then you need to define
   the procedure in your configuration file, e.g.,

   proc postload {} {
   # look-and-feel

       set pixmaps::options(pixmaps_theme) Default

       global alert colors alert_lvls

       set alert_lvls(error)        1
       set alert_lvls(server)       1
       set alert_lvls(message)      2
       set alert_lvls(mesg_to_user) 3
       set alert_colors             {Black DarkBlue Blue Red}

       set ifacetk::options(raise_new_tab) 1


   # the autoaway module

       set plugins::autoaway::options(awaytime)  5
       set plugins::autoaway::options(xatime)   15
       set plugins::autoaway::options(status) "Automatically away due to idle"
       set plugins::autoaway::options(drop_priority) 1


   # the avatar module

       set avatar::options(announce) 0
       set avatar::options(share)    0


   # the chat module

       set chat::options(default_message_type) chat
       set chat::options(stop_scroll)          0
       set plugins::options(timestamp_format)  {[%R]}


   # the clientinfo module



Shchepin, et al.                                               [Page 24]

                             Tkabber 0.11.0                    June 2008


       set plugins::clientinfo::options(autoask) 0


   # the conferenceinfo module

       set plugins::conferenceinfo::options(autoask)        0
       set plugins::conferenceinfo::options(interval)       1
       set plugins::conferenceinfo::options(err_interval)  60


   # the cryptographic module

       set ssj::options(encrypt,fred@example.com) 1


   # the emoticon module

       set plugins::emoticons::options(theme) \
                   $::configdir/emoticons/rythmbox


   # the file transfer module

       set ft::options(download_dir) "/tmp"


   # the groupchat module

       global gra_group gra_server
       global gr_nick gr_group gr_server
       global defaultnick

       set defaultnick(adhoc@conference.example.com) publius
       set defaultnick(*@conference.example.com) cicerone


   # the ispell module

       set plugins::ispell::options(enable)              1
       set plugins::ispell::options(executable)          /usr/bin/ispell
       set plugins::ispell::options(command_line)        -C -d russian
       set plugins::ispell::options(dictionary_encoding) koi8-r
       set plugins::ispell::options(check_every_symbol)  1

   # the stream initiation module

       set si::transport(allowed,http://jabber.org/protocol/bytestreams) 0
       set si::transport(allowed,http://jabber.org/protocol/ibb) 1



Shchepin, et al.                                               [Page 25]

                             Tkabber 0.11.0                    June 2008


   # the logger module

       set logger::options(logdir)        [file join $::configdir logs]
       set logger::options(log_chat)      1
       set logger::options(log_groupchat) 1


   # the login module

       global loginconf loginconf1 loginconf2 autologin

       set loginconf(user)           ""
       set loginconf(password)       ""
       set loginconf(server)         example.com
       set loginconf(resource)       tkabber
       set loginconf(priority)       16
       set loginconf(usealtserver)   0
       set loginconf(altserver)      ""
       set loginconf(altport)        5422
       set loginconf(stream_options) plaintext
       set loginconf(proxy)          https
       set loginconf(usesasl)        1
       set loginconf(allowauthplain) 0
       set loginconf(proxyhost)      localhost
       set loginconf(proxyport)      3128
       set loginconf(proxyusername)  ""
       set loginconf(proxypassword)  ""

       # The following variables are useful when your jabber-server
       # (example.com) does not have SRV or A-record in DNS
       set loginconf(usealtserver)  1
       set loginconf(altserver)     "jabber.example.com"

       set loginconf1(profile)      "Default Account"
       set loginconf1(user)         mrose

       set loginconf2(profile)      "Test Account"
       set loginconf2(user)         test

       array set loginconf          [array get loginconf1]

       set autologin 0


   # the message module

       set message::options(headlines,cache)    1
       set message::options(headlines,multiple) 1



Shchepin, et al.                                               [Page 26]

                             Tkabber 0.11.0                    June 2008


   # the raw xml input module

       set plugins::rawxml::set options(pretty_print) 0
       set plugins::rawxml::set options(indent)       2


   # the roster module

       set roster::show_only_online            1
       set roster::roster(collapsed,RSS)       1
       set roster::roster(collapsed,Undefined) 1

       set roster::aliases(friend@some.host) \
           {friend@other.host friend@another.host}
       set roster::use_aliases                 1


   # the sound module

       set sound::options(mute)                   0
       set sound::options(mute_if_focus)          0
       set sound::options(notify_online)          0
       set sound::options(mute_groupchat_delayed) 1
       set sound::options(mute_chat_delayed)      0
       set sound::options(external_play_program) /usr/bin/aplay
       set sound::options(external_play_program_options) -q
       set sound::options(delay)

       set sound::options(connected_sound)                     ""
       set sound::options(presence_available_sound)            ""
       set sound::options(presence_unavailable_sound)          ""
       set sound::options(groupchat_server_message_sound)      ""
       set sound::options(groupchat_their_message_to_me_sound) ""
   }

   This isn't nearly as complicated as it seems.  Let's break it down by
   individual module

6.2.1.  Look-and-Feel

   _Tkabber_ is shameless in borrowing icons from other Jabber clients.
   By setting "pixmaps::options(pixmaps_theme)", you can select a family
   of related icons.  Besides ""Default"", you can choose one of
   ""Gabber"", ""JAJC"", ""Jarl"", ""Psi"", ""ICQ"", or a few other
   themes.

   If you want, you can have _Tkabber_ use a different theme by putting
   custom theme subdirectory to "$::configdir/pixmaps/" directory (tilde



Shchepin, et al.                                               [Page 27]

                             Tkabber 0.11.0                    June 2008


   means home directory). _Tkabber_ knows that it is a theme directory
   by looking for "icondef.xml" file in the directory.  To find out the
   structure of icon definition file, look through _XEP-0038_ and go to
   where you installed _Tkabber_ and take a look at the directory called
   ""pixmaps/default/"".

   If you're using the tabbed window interface, _Tkabber_ needs a way of
   telling you that something has changed in a window that's not on top.
   This is where the an array called _alert_lvls_ and a list called
   _alert_colors_ come in.  The array maps an incoming message to a
   priority number from zero to three.  The list, which is indexed
   starting at _zero_, indicates what color the tab should use to let
   you know that something's changed.  So, the way to read the example
   is that receiving:

   o  an error or server message will cause the tab of a lowered window
      to go dark blue;

   o  a groupchat or headline message will cause the tab to go blue;
      and,

   o  a chat message addressed directly to you will cause the tab to go
      red.

   By default, whenever a new tab is created, it is automatically
   raised.  If you don't like this behavior, add this line:
   set ifacetk::options(raise_new_tab) 0

6.2.2.  The Autoaway Module

   This module is presently available only if either:

   o  on UNIX, if you have the _Tk Xwin_ extension installed; or,

   o  On Windows, if you have the _Tcl Winidle_ extension installed.

   There are two variables that control when _Tkabber_ automatically
   marks you as away: "plugins::autoaway::options(awaytime)" and
   "plugins::autoaway::options(xatime)".  Both define the idle threshold
   in minutes (the number does not have to be integer).

   If variable "plugins::autoaway::options(drop_priority)" is set in 1
   then _Tkabber_ will set priority to 0 when moving in extended away
   state.

   Variable "plugins::autoaway::options(status)" allows to specify text
   status, which is set when _Tkabber_ is moving in away state.




Shchepin, et al.                                               [Page 28]

                             Tkabber 0.11.0                    June 2008


6.2.3.  The Avatar Module

   There are two variables that you can set to control whether _Tkabber_
   will allow others to see your avatar:

   o  "avatar::options(announce)" determines whether your presence
      information indicates that you have an avatar; and,

   o  "avatar::options(share)" determines whether requests for your
      avatar will be honored.

6.2.4.  The Chat Module

   Most instant messaging users prefer to see all the back-and-forth
   communication in a single window.  If you prefer to see each line
   sent back-and-forth in a separate window, here's what to put in your
   "postload":

   set chat::options(default_message_type) normal

   The variable named "chat::options(stop_scroll)" determines whether a
   chat window should automatically scroll down to the bottom whenever
   something new comes in.

   You can also set format of time stamp that displayed in beginning of
   each chat message.  Refer to _Tcl_ documentation for description of
   format.  E.g., to display it in ""dd:mm:ss"" format, add this line:

   set plugins::options(timestamp_format) {[%T]}

6.2.5.  The Clientinfo Module

   This module shows in popup balloons information of used by this user
   client name, version, and OS.  You can allow or deny automatic asking
   of this info from users by setting this variable to 1 or 0:
   set plugins::clientinfo::options(autoask) 1

6.2.6.  The Conferenceinfo Module

   After you join a conference that's listed in your roster, then
   whenever you mouse over that roster entry, you'll see a popup listing
   the conference's participants.  If you want to see this popup,
   regardless of whether you are currently joined with the conference,
   add this line to your post-load:
   set plugins::conferenceinfo::options(autoask) 1






Shchepin, et al.                                               [Page 29]

                             Tkabber 0.11.0                    June 2008


   You can also set interval between these requests with these two
   variables:

   set plugins::conferenceinfo::options(interval)       1
   set plugins::conferenceinfo::options(err_interval)  60

   The second variable defines how many minutes to wait after receiving
   an error reply before trying again.  (Usually an error reply
   indicates that the server hosting the conference doesn't support
   browsing, so it makes sense not to try that often.

6.2.7.  The Cryptographic Module

   Earlier (Section 6.1) we saw an example where the "ssj::options"
   array from the cryptographic module was set during the preload.

   In addition to "signed-traffic" and "encrypt-traffic", you can also
   tell _Tkabber_ whether to encrypt for a particular JID, e.g.,

       set ssj::options(encrypt,fred@example.com) 1

6.2.8.  The Emoticons Module

   The procedure called _plugins::emoticons::load_dir_ is used to load
   emoticon definitions from a directory.  The directory contains a file
   called ""icondef.xml"", which defines the mapping between each image
   and its textual emoticon (To find out what this file looks like, go
   to where you installed _Tkabber_ and take a look at the file called
   ""emoticons/default/icondef.xml"" or read XEP-0038 [24].)

   If you have just a few icons, and you don't want to create a
   directory and a textual mapping, you can use the procedure called
   "plugins::emoticons::add", e.g.,

       plugins::emoticons::add ":beer:" \
           [image create photo -file $::configdir/emoticons/beer.gif]

   If you want to disable all emoticons, you can simply load empty
   directory.  Put in postload function

       plugins::emoticons::load_dir ""

6.2.9.  The File Transfer Module

   You can set directory in which files will be saved by default:

       set ft::options(download_dir) "/tmp"




Shchepin, et al.                                               [Page 30]

                             Tkabber 0.11.0                    June 2008


6.2.10.  The Groupchat Module

   There are several variables that set the dialog window defaults for
   adding a groupchat to your roster, or joining a groupchat:

   add to roster dialog window: "gra_group" and "gra_server" specify the
      default room and conference server, repectively; and,

   join dialog window: "gr_nick", "gr_group" and "gr_server" specify the
      default nickname, room, and conference server, respectively.

   Note that variables "gra_server", "gr_nick" and "gr_server" overriden
   in login procedure, so better place for changing them is in
   "connected_hook" (see below).

   You may want to have different nicknames for different groupchats.
   Accordingly, the array called _defaultnick_ is used to set the
   default nickname for when you enter a conference.  The array is
   indexed by the JID of the room, e.g.,

       set defaultnick(adhoc@conference.example.com) publius

   Another possibility is to put pattern in parentheses.  The following
   example shows how to specify default nickname for all conferences at
   _conference.example.com_:

       set defaultnick(*@conference.example.com) ciceroni

   Exact JID's take the higher precedence than patterns.

6.2.11.  The Ispell Module

   On Unix, _Tkabber_ can check spelling of what you entered by calling
   an external program _ispell_.  To enable this feature, add following
   lines to postload function:

   set plugins::ispell::options(enable) 1

   If you enabled this module, then you can also define:

   o  the path to the _ispell_ executable by setting
      "plugins::ispell::options(executable)"

   o  the _ispell_ command line options by setting
      "plugins::ispell::options(command_line)"; and,

   o  the encoding of the output by setting
      "plugins::ispell::options(dictionary_encoding)".



Shchepin, et al.                                               [Page 31]

                             Tkabber 0.11.0                    June 2008


   If you don't care about putting a large load on your process, then
   you can also set "plugins::ispell::options(check_every_symbol)" to 1
   to check correctness of current word after every entered symbol.
   (Usually you don't need to set this option.)

6.2.12.  The Stream Initiation Module

   Stream initiation profile is defined in _XEP-0095_ with two
   transports (_XEP-0047_ - IBB, _XEP-0065_ - SOCKS5 bytestreams).  With
   it you can specify what transports you can use, and via negotiation
   choose more appropriate one. _Tkabber_ comes with two transport
   implementations:

   bytestreams: that allows you to connect to any node that supports
      "bytestreams" transport (mediated connection is not supported
      yet);

   ibb: that uses your "Jabber" connection to transmit the data (which
      may slowdown other traffic to you).

   If your machine is behind a NAT, then you can't use the "bytestreams"
   transport, so you should disable it:

       set si::transport(allowed,http://jabber.org/protocol/bytestreams) 0

6.2.13.  The Logger Module

   You can set directory to store logs:

       set logger::options(logdir) [file join $::configdir logs]

   Also you can allow or disallow storing of private and group chats
   logs:

       set logger::options(log_chat)      1
       set logger::options(log_groupchat) 1

6.2.14.  The Login Module

   The first task is to initialize the configuration defaults for the
   _login_ module.  As you can see above, the global array "loginconf"
   has a whole bunch of elements, e.g., "user", "password", and so on.

   Elements "loginconf(user)" and "loginconf(password)"specify username
   and password to authenticate at your _Jabber_ server.

   Element "loginconf(server)" must be set to _Jabber_ server name (the
   part of you _JID_ after "@".



Shchepin, et al.                                               [Page 32]

                             Tkabber 0.11.0                    June 2008


   Element "loginconf(stream_options)" is set to one of the following
   values:

   o  plaintext -- use plaintext connection;

   o  encrypted -- use encrypted (via STARTTLS mechanism) connection
      (this option requires tls extension to be installed);

   o  ssl -- use encrypted (via legacy SSL mechanism) connection (this
      option requires tls extension to be installed);

   o  compressed -- use compressed connection (this option requires Ztcl
      extension to be installed).

   _Tkabber_ tries to resolve _Jabber_ server name using _SRV_ first and
   usual _A_ records in _DNS_.  If the resolution fails (for example if
   you are in LAN environment without _DNS_) you can force _Tkabber_ to
   connect to the server using "loginconf(altserver)" and
   "loginconf(altport)" options (do not forget to set
   "loginconf(usealtserver)" to "1").

   Another option is to use _HTTP_-polling connect method (if your
   server supports it) and tunnel _XMPP_ traffic through _HTTP_.  To
   enable _HTTP_-polling set "loginconf(usehttppoll)" to "1". _Tkabber_
   then tries to find connect _URL_ using _TXT_ record in _DNS_ (see
   XEP-0156).  You can specify _URL_ manually by setting
   "loginconf(pollurl)".

   This collection of elements, which is termed a login profile, is what
   populates the dialog window you'll see when _Tkabber_ wants to
   connect to the server.

   It turns out that _Tkabber_ lets you have as many different login
   profiles as you want.  If you want more than just one, they're named
   "loginconf1", "loginconf2", and so on.

   What the example above shows is the default values for all profiles
   being set in "loginconf", and then two profiles, one called ""Default
   Account"" and the other called ""Test Account"" being created.

   If you want to automatically login to server, then you can set the
   "autologin" variable to "1".

   If you set the "autologin" variable to "-1", then _Tkabber_ will not
   automatically login and will not show login dialog.

   Default value for "autologin" is "0".  In this case _Tkabber_ shows
   login dialog.



Shchepin, et al.                                               [Page 33]

                             Tkabber 0.11.0                    June 2008


6.2.15.  The Message Module

   By default, when you restart _Tkabber_ it won't remember the
   headlines you received.  If you want _Tkabber_ to remember headlines
   whenever you run it, set "message::options(headlines,cache)" to "1".

   By default, _Tkabber_ will put all headline messages into a single
   window.  If you want _Tkabber_ to use a seperate window for each
   headline source, set "message::options(headlines,multiple)" to "1".

6.2.16.  The Raw XML Input Module

   With this module you can monitor incoming/outgoing traffic from
   connection to server and send custom XML stanzas.  Also you can
   switch on "pretty print" option to see incoming and outgoing XML
   stanzas pretty printed.  Note, that with this option they may be
   drawed incorrectly, e.g. for XHTML tags.  Also you can set
   indentation level via "indent" option.

6.2.17.  The Roster Module

   By default, your entire roster is shown, even those items that aren't
   online.  The variable called "roster::show_only_online" controls
   this.

   Similarly by default, each item in every category is shown in the
   roster.  If you want to hide the items in a given category, the array
   called "roster::roster" lets you do this.  In the example, we see
   that two groups (""RSS"" and ""Undefined"") start with their items
   hidden.

   Some peoples use several JIDs. _Tkabber_ lets you specify an alias
   for people like these, so it will show only one entry in the roster.
   In the example, we see that user "friend@some.host" have aliases
   "friend@other.host" and "friend@another.host".  You can also disable
   all aliases by setting "roster::use_aliases" to "0".

6.2.18.  The Sound Module

   _Tkabber_ can play sounds on some events.  It can use for this
   _snack_ library or external program that can play _WAV_ files.  Sound
   notifications is enabled when _Tkabber_ starts.

   If you want to start _Tkabber_ with sound muted add the following
   line:
   set sound::options(mute) 1





Shchepin, et al.                                               [Page 34]

                             Tkabber 0.11.0                    June 2008


   If you want _Tkabber_ to stop notifying you when you are not online
   (in away or dnd state) add the following line:
   set sound::options(notify_online) 1

   If you want _Tkabber_ to mute sound when it is focued (and you are
   paying enough attention to it) add the following line:
   set sound::options(mute_if_focus) 1

   You can also mute sounds of delayed groupchat messages and delayed
   personal chat messages:

   set sound::options(mute_groupchat_delayed) 1
   set sound::options(mute_chat_delayed)      0

   If you want to use external program for playing sounds and possibly
   this program's options, then also add something like this (these
   options are suitable for Linux users with ALSA installed):

   set sound::options(external_play_program) /usr/bin/aplay
   set sound::options(external_play_program_options) -q

   You can also set minimal interval (in milliseconds) between playing
   different sounds.
   set sound::options(delay) 200

   _Tkabber_ allows you to specify the filename it will play notifying
   about some more or less important events.  These are:

   o  "sound::options(connected_sound)" -- sound playing when _Tkabber_
      is connected to the server;

   o  "sound::options(presence_available_sound)" -- sound playing when
      available presence is coming;

   o  "sound::options(presence_unavailable_sound)" -- sound playing when
      unavailable presence is coming;

   o  "sound::options(chat_my_message_sound)" -- sound playing when you
      send one-to-one chat message;

   o  "sound::options(chat_their_message_sound)" -- sound playing when
      you receive one-to-one chat message;

   o  "sound::options(groupchat_server_message_sound)" -- sound playing
      when you receive groupchat message from server;

   o  "sound::options(groupchat_my_message_sound)" -- sound playing when
      you receive groupchat message from server;



Shchepin, et al.                                               [Page 35]

                             Tkabber 0.11.0                    June 2008


   o  "sound::options(groupchat_their_message_sound)" -- sound playing
      when you receive groupchat message from another user;

   o  "sound::options(groupchat_their_message_to_me_sound)" -- sound
      playing when you receive highlighted (usually personally
      addressed) groupchat message from another user.

   If you want to disable sound notification for some of the events,
   then you can add line like this:

   set sound::options(connected_sound)                     ""
   set sound::options(presence_available_sound)            ""
   set sound::options(presence_unavailable_sound)          ""
   set sound::options(groupchat_server_message_sound)      ""
   set sound::options(groupchat_their_message_to_me_sound) ""

6.3.  Menu-load

   After _Tkabber_ invokes your "postload" procedure, it starts building
   the GUI.  One of the most important things it does is build up a list
   that specifies its menu bar.  It then invokes a procedure called
   "menuload", which is allowed to modify that specification before
   _Tkabber_ uses it.

   The default version of this procedure is the identity function,
   i.e..,

   proc menuload {description} { return $description }

   If you _really_ want to change the menubar specification, then here's
   how to get started:

   1.  Go to where you installed the _BWidget_ library and take a look
       at the file called ""BWman/MainFrame.html"".  The documentation
       for the ""-menu"" option explains the syntax of the
       specification.

   2.  Go to where you installed _Tkabber_ and take a look at the file
       called ""iface.tcl"".  Look for the line that starts with ""set
       descmenu"".  This will show you the specification given to your
       "menuload" procedure.

   3.  Go to where you installed _Tkabber_ and take a look at the file
       called ""examples/mtr-config.tcl"".  Look at the "menuload"
       procedure defined there.  It lays out _Tkabber's_ menu bar
       similar to _Gabber's_.





Shchepin, et al.                                               [Page 36]

                             Tkabber 0.11.0                    June 2008


   4.  Finally, study the procedures listed here.

6.3.1.  The Avatar Module

   The procedure called "avatar::store_on_server" stores your avatar on
   the server.

6.3.2.  The Browser Module

   The procedure called "browser::open" opens a new browser window.

6.3.3.  The Groupchat Module

   The procedure called "add_group_dialog" displays a dialog window when
   you want to add a groupchat to your roster.  Similarly, the procedure
   called "join_group_dialog" displays a dialog window when you want to
   join a groupchat.

6.3.4.  The Login Module

   The procedure called "show_login_dialog" displays a dialog window
   when you want to login to the server.  (Prior to attempting to login,
   if necessary it will logout).  Naturally, the procedure called
   "logout" does just that; however, if you want get a dialog window for
   confirmation, use "show_logout_dialog" instead.

6.3.5.  The Message Module

   If you want to send a message to someone, the procedure called
   "message::send_dialog" will put up a dialog window.  It takes upto
   three optional arguments: the recipient JID, the subject, and the
   thread.

   If you want to get added to someone's roster, the procedure called
   "message::send_subscribe_dialog" will put up a dialog window.  It
   takes one optional argument: the recipient JID.

   If you want to adjust your message filters, the procecure called
   "filters::open" will put up a dialog window.

6.3.6.  The Presence Module

   If you want to display information about a user, the procecure called
   "userinfo::open" will put up a dialog window.  It takes two optional
   arguments: the user's JID; and, whether or not the dialog window
   should be editable.





Shchepin, et al.                                               [Page 37]

                             Tkabber 0.11.0                    June 2008


   Obviously, the second argument makes sense only if it's your own
   information, i.e.,

       global loginconf

       userinfo::open \
           ${loginconf(user)}@$loginconf(server)/$loginconf(resource) 1

   There are also two variables that you can use to set your own
   presence: "userstatus" and "textstatus".  The first variable takes
   one of five values:

   o  available;

   o  chat;

   o  away;

   o  xa;

   o  dnd; or,

   o  invisible.

   The second variable takes any textual value.

   Changes to your presence information are propagated only when
   "userstatus" is changed.  Accordingly, if you make a change to
   "textstatus", be sure to write "userstatus" immediately afterwards,
   even if it's a no-op, e.g.,

       global userstatus textstatus

       set textstatus "Out to lunch"
       set userstatus $userstatus

6.3.7.  Miscellany

   Finally, you can use the procedure named "help_window" to display
   some textual help.  This procedure takes two arguments: the title for
   the window; and, the text to display.

   Also, instead of calling "exit" to terminate _Tkabber_, please use
   the "quit" procedure instead.

6.4.  Final-Load

   Finally, right before _Tkabber_ goes to display the login dialog, it



Shchepin, et al.                                               [Page 38]

                             Tkabber 0.11.0                    June 2008


   invokes a procedure called "finload", which does whatever you want it
   to.

















































Shchepin, et al.                                               [Page 39]

                             Tkabber 0.11.0                    June 2008


7.  Extensibility

   In addition to various configuration mechanisms, _Tkabber_ lets you
   define procedures, termed "hooks" that get run when certain events
   happen.

   Here's an example.  When _Tkabber_ receives a chat message, how does
   it know what to process and what to draw?  The short answer is that
   it doesn't need to know anything, all it does is:

   hook::run draw_message_hook $chatid $from $type $body $extras

   The "hook::run" procedure invokes whatever hooks have been defined
   for "draw_message_hook".  In fact, more than ten procedures may get
   invoked to satisfy this hook!

   Here's how it works: _Tkabber_ comes with a number of plugins, which
   get loaded automatically.  Each plugin makes one or more calls that
   look like this:

   hook::add draw_message_hook [namespace current]::my_draw_hook $prio

   where the last two parameters are: the name of a procedure to run;
   and, a relative integer priority.

   When "hook::run" is invoked for "draw_message_hook", each of these
   procedures is called, in the priority order (from smallest to
   largest).  If one of the procedures wants to prevent the later
   procedures from being called, it returns the string ""stop"".






















Shchepin, et al.                                               [Page 40]

                             Tkabber 0.11.0                    June 2008


   To continue with the example, in between the pre-load and post-load
   stages of configuration, the following calls get made by different
   plugins:

   hook::add draw_message_hook [list ...::events::process_x 0] 0
   hook::add draw_message_hook ...::chatstate::process_x 1
   hook::add draw_message_hook ...::check_draw_empty_body 4
   hook::add draw_message_hook ...::chat_open_window 5
   hook::add draw_message_hook [list ...::events::process_x 1] 6
   hook::add draw_message_hook ...::draw_signed 6
   hook::add draw_message_hook ...::draw_encrypted 7
   hook::add draw_message_hook ...::handle_error 10
   hook::add draw_message_hook ...::handle_info 10
   hook::add draw_message_hook ...::draw_timestamp 15
   hook::add draw_message_hook    ::logger::log_message 15
   hook::add draw_message_hook      muc::set_message_timestamp 15
   hook::add draw_message_hook ...::add_number_of_messages_to_title 18
   hook::add draw_message_hook ...::chat_message_notify19
   hook::add draw_message_hook ...::handle_server_message 20
   hook::add draw_message_hook ...::roster::update_chat_activity 50
   hook::add draw_message_hook ...::check_nick 60
   hook::add draw_message_hook    ::wmdock::msg_recv 70
   hook::add draw_message_hook ...::handle_last_nick 79
   hook::add draw_message_hook ...::::add_bookmark 80
   hook::add draw_message_hook ...::handle_me 83
   hook::add draw_message_hook ...::xhtml::draw_xhtml_message 85
   hook::add draw_message_hook ...::draw_normal_message 87

   Many of these procedures look at the incoming chat message and
   operate on only certain kinds of messages.  Some of these procedures
   may return ""stop"", e.g., "handle_me" which handles chat bodies that
   start with ""/me"" and draw_xhtml_message which visualizes _XHTML_
   formatted messages.  (In this example, the actual namespaces were
   replaced with ""...:"" to make it more readable).

   Now let's look at the different kind of hooks that _Tkabber_ knows
   about.

7.1.  Chat Hooks

   When _Tkabber_ decides that it needs to open a (tabbed) window for a
   chat or groupchat, two hooks are run:

   open_chat_pre_hook  $chatid $type
   open_chat_post_hook $chatid $type

   Both hooks are given two parameters: the chatid (ID of the chat or
   conference room window, you always can obtain JID using



Shchepin, et al.                                               [Page 41]

                             Tkabber 0.11.0                    June 2008


   "chat::get_jid" and connection ID using "chat::get_connid" routines);
   and, and the type of chat (either ""chat"" or ""groupchat"").

   Similarly, when _Tkabber_ encounters activity on a tabbed window, a
   hook is run:

   raise_chat_tab_hook $path $chatid

   The hook is given two parameters: the path of the _Tk_ widget for the
   tabbed window; and, the chatid of the chat or conference room window.

   When you want to send a chat message, a hook is run:

   chat_send_message_hook $chatid $user $body $type

   The hook is given four parameters: the chatid of the recipient; the
   localpart of your login identity; the body of the message; and, the
   type of chat.

   draw_message_hook $chatid $from $type $body $extras

   The hook is given five parameters: the chatid of the sender window
   (JID includes a resource); the JID of the sender (without the
   resource); the type of chat; the body of the message; and, a nested-
   list of additional payload elements.  (This last parameter isn't
   documented in this version of the documentation.)

   Chat windows have menubuttons, and two hooks are used to add items in
   menu:

   chat_create_user_menu_hook $path $connid $jid
   chat_create_conference_menu_hook $path $connid $jid

   The first is used in user chat windows, and second in groupchat ones.
   Hooks are given three parameters: the path of the _Tk_ menu widget;
   connection ID; and, the JID of user or conference.

   In groupchat windows it is possible to complete participants' nicks
   or commands by pressing TAB key.  List of completions is generated by
   running this hook:

   generate_completions_hook $chatid $compsvar $wordstart $line

   The hook is given four parameters: the chatid of conference window;
   name of global variable, in which current list of possible
   completions is stored; index of position where completion must be
   inserted; and content of text widget where completion is requested.




Shchepin, et al.                                               [Page 42]

                             Tkabber 0.11.0                    June 2008


   When someone enters/exits conference, the following hooks are called:

   chat_user_enter $group $nick
   chat_user_exit  $group $nick

   The hooks are given two parameters: chatid of conference and nick of
   participant.

7.2.  Login Hooks

   Two hooks are invoked whenever a session is connected or
   disconnected:

   connected_hook $connid

   disconnected_hook $connid

   Both hooks are given one parameter: connection ID (_Tkabber_ allows
   several connections at once).

7.3.  Presence Hooks

   When our presence status changes, a hook is run:

   change_our_presence_post_hook $status

   The hook is given one parameter: the new presence status value, i.e.,
   one of:

   o  available;

   o  chat;

   o  away;

   o  xa;

   o  dnd; or

   o  unavailable.

   Similarly, when someone else's presence changes, a hook is run:

   on_change_user_presence_hook $label $status

   The hook is given two parameters: the label associated with the JID
   (e.g., "fred") or the JID itself (e.g., "fred@example.com") if no
   label exists in the roster; and, the user's new status.



Shchepin, et al.                                               [Page 43]

                             Tkabber 0.11.0                    June 2008


   And for all received presence packets, a hook is run:

   client_presence_hook $connid $from $type $x $args

   The hook is given four parameters: connection ID, who send this
   presence, type of presence (e.g., "error", "unavailable"), list of
   extended subtags and parameters of this presence (e.g., "-show xa
   -status online").

7.4.  Roster Hooks

   When an item is added to the roster window, one of the four hooks is
   run to add stuff to the menu associated with that item:

   roster_conference_popup_menu_hook $path $connid $jid

   roster_service_popup_menu_hook $path $connid $jid

   roster_jid_popup_menu_hook $path $connid $jid

   roster_group_popup_menu_hook $path $connid $name

   When run, each hook is given three parameters: the path of the _Tk_
   menu widget; the connection ID; and, a JID of the roster item (or the
   name of the roster group for the last one).

   Also the following hook is run to add stuff to the menu in
   groupchats:

   roster_create_groupchat_user_menu_hook $path $connid $jid

   The hook is given three parameters: the path of the _Tk_ menu widget;
   the connection ID; and, a JID of user.

   The following hook is run to add stuff to the popup balloon for each
   roster item:

   roster_user_popup_info_hook $varname $connid $jid

   The hook is given three parameters: the variable name in which
   current popup text is stored, the connection ID, and the JID of the
   roster item.









Shchepin, et al.                                               [Page 44]

                             Tkabber 0.11.0                    June 2008


7.5.  Miscellaneous Hooks

   There are three "obvious" hooks:

   postload_hook

   finload_hook

   quit_hook

   The first two, by default, run the "postload" and "finload"
   procedures, respectively. _postload_hook_ is run after all code has
   been loaded and before initializing main _Tkabber_ window.  After
   that _finload_hook_ is run.  The final hook is called just before
   _Tkabber_ terminates (cf., Section 6.3.7).

   You can add custom pages to userinfo window using

   userinfo_hook $path $connid $jid $editable
































Shchepin, et al.                                               [Page 45]

                             Tkabber 0.11.0                    June 2008


8.  User Interface basics

8.1.  Searching

   Search panel may be invoked in certain classes of _Tkabber_ windows
   using the "<<OpenSearchPanel>>" Tk virtual event which is bound by
   default to the "<Control-S>" keyboard command.

   Search panel can be dismissed by pressing the "<Escape>" key and the
   default search action ("search down") is activated by pressing the
   "<Return>" key while entering the search pattern.

   Search panel is currenlty available in:

   o  Chat and groupchat windows;

   o  Service discovery window;

   o  Chat history logs;

   o  All windows of the "Chats history" tool.

   Searching may be customized using the settings located under the
   _Plugins --> Search_ group of the _Customize_ window.  These setings
   are:

   o  "::plugins::search::options(case)": perform case-sensitive
      searching (_off_ by default);

   o  "::plugins::search::options(mode)": selects searching mode which
      can be one of:

      *  _substring_ -- use simple substring search: the typed search
         string is taken verbatim and then the attempt to locate it is
         performed.  This is the default mode.

      *  _glob_ -- uses "glob-style" (or "shell-style") matching:
         special symbols are recognized and they provide for
         "wildcarding":

         +  _*_ matches zero or more characters;

         +  _?_ matches exactly one character;

         +  _[_ and _]_ define character classes, e.g., "[A-Z]" will
            match any character in the series "A", "B", ...  "Z".

         The full syntax is described in Tcl string manual page.  That



Shchepin, et al.                                               [Page 46]

                             Tkabber 0.11.0                    June 2008


         is, this search mode can be convenient for those who want more
         general yet simple approach to searching and is familiar with
         the "shell globbing" concept found in Unix shells.

      *  _regexp_ -- provides for searching using full-blown regular
         expressions engine.  The full syntax is described in Tcl
         re_syntax manual page [25].












































Shchepin, et al.                                               [Page 47]

                             Tkabber 0.11.0                    June 2008


Appendix A.  Releases History

A.1.  Main changes in 0.11.0

   o  New tabbed user interface.  Tab headers now occupy several rows
      and tab bar can be docked to the left and right sides of chat
      window

   o  Roster filter

   o  Added support for pixmaps (in particular emoticons) JISP archives
      (XEP-0038)

   o  Added support for SOCKS4a and SOCKS5 proxy for the main connection

   o  Added user location support (XEP-0080)

   o  Added user mood support (XEP-0107)

   o  Added user activity support (XEP-0108)

   o  Added user tune support (XEP-0118)

   o  Added entity capabilities (XEP-0115 v.1.5, only reporting) support

   o  Added basic robot challenges support (XEP-0158, v.0.9)

   o  Added partial data forms media element support (XEP-0221, v.0.2,
      URIs and images only)

   o  Roster is now exported to XML instead of Tcl list

   o  Added support for entity time (XEP-0202)

   o  Tkabber version is now reported in disco#info (XEP-0232)

   o  Moved deprecated Jabber Browser (XEP-0011) to an external plugin

   o  Moved Jidlink file transfer to an external plugin

   o  Added several new plugins: attline, ctcomp, custom-urls,
      floatinglog, gmail, openurl, presencecmd, receipts

   o  Many fixes and enhancements







Shchepin, et al.                                               [Page 48]

                             Tkabber 0.11.0                    June 2008


A.2.  Main changes in 0.10.0

   o  New artwork by Artem Bannikov

   o  Mediated SOCKS5 connection support for file transfer (XEP-0065)

   o  Blocking communicaation with users not in roster (using XEP-0016
      via simple interface)

   o  Translatable outgoing error messages support (based on recipient's
      xml:lang)

   o  Remote controlling clients support (XEP-0146)

   o  Extended stanza addressing support (XEP-0033)

   o  New chats history tool with search over the all chatlog files

   o  Roster item icons are chosen based on Disco queries to item server

   o  Search in Disco, Browser, Headlines, RawXML, and Customize windows

   o  New internal plugins: abbrev allows to abbreviate words in chat
      input windows, postpone stores/restores current input window
      content

   o  New external plugins (aniemoticons, latex, tkabber-khim, traffic,
      renju)

   o  Emoticons theme now can be loaded using GUI

   o  Most Tkabber's tabs can now be stored on exit and restored on
      start

   o  XMPP ping support (XEP-0199).  Reconnecting based on XMPP ping
      replies

   o  Delayed delivery now recognizes XEP-0203 timestamps

   o  Added optional 'My Resources' roster group, which contains other
      connected resources of the same JID

   o  Many fixes and enhancements

A.3.  Main changes in 0.9.9






Shchepin, et al.                                               [Page 49]

                             Tkabber 0.11.0                    June 2008


   o  Improved privacy lists interface

   o  Support for stream compression (XEP-0138)

   o  Support for SRV DNS-records

   o  Support for TXT DNS-records (XEP-0156)

   o  Support for ad-hoc commands (XEP-0050)

   o  Improved headlines support

   o  Chat state notification support (XEP-0085)

   o  Many fixes and enhancements

A.4.  Main changes in 0.9.8

   o  Support for STARTTLS

   o  Reorganized menu

   o  Support for searching in chat window

   o  Support for annotations about roster items (XEP-0145)

   o  Support for conference rooms bookmarks (XEP-0048)

   o  Added multilogin support for GPGME

   o  Better support for xml:lang

   o  Support for service discovery extensions (XEP-0128)

   o  Support for NTLM authentication

   o  Many fixes and enhancements

A.5.  Main changes in 0.9.7beta

   o  Updated support for file transfer (XEP-0095, XEP-0096, XEP-0047,
      XEP-0065)

   o  Support for colored nicks and messages in conference

   o  Better multiple logins support





Shchepin, et al.                                               [Page 50]

                             Tkabber 0.11.0                    June 2008


   o  Updated support for xml:lang

   o  Support for IDNA (RFC3490)

   o  Many fixes and enhancements

A.6.  Main changes in 0.9.6beta

   o  Multiple logins support

   o  History now splitted by month

   o  Animated emoticons support

   o  Many user interface improvements

   o  More XMPP support

   o  More translations

   o  Bugfixes

A.7.  Main changes in 0.9.5beta

   o  Nested roster groups

   o  Messages emphasizing

   o  User interface improvements

   o  Support for XMPP/Jabber MIME Type

   o  Bugfixes


















Shchepin, et al.                                               [Page 51]

                             Tkabber 0.11.0                    June 2008


Appendix B.  Tk option database resources

   Here is list of the most essential _Tkabber_-specific _Tk option
   database_ resources that you need to change look:

   Tkabber.geometry Geometry of main window.

   *Chat.chatgeometry

   *Chat.groupchatgeometry

   *Customize.geometry

   *RawXML.geometry

   *Stats.geometry

   *Messages.geometry

   *JDisco.geometry Geometry of various windows (when not using tabs).

   *mainRosterWidth The width of the main roster window.

   *Chat.inputheight

   *RawXML.inputheight Height of input windows in chat and raw XML
      windows.

   *Balloon.background

   *Balloon.foreground Background and foreground colors of popup
      balloon.

   *Balloon.style Behaviour of popup balloon: can be "delay" (balloon
      appeared after some time) and "follow" (balloon appeared
      immediately and follows mouse).

   *JDisco.fill Color of service discovery browser item name.

   *JDisco.identitycolor Color of service discovery browser item
      identity.

   *JDisco.featurecolor Color of service discovery browser entity
      feature.







Shchepin, et al.                                               [Page 52]

                             Tkabber 0.11.0                    June 2008


   *JDisco*Tree*background Background of service discovery browser.

   *Chat.meforeground Color of user's messages in chat windows.

   *Chat.theyforeground Color of other peoples messages in chat windows.

   *Chat.serverlabelforeground Color of label before server message.

   *Chat.serverforeground Color of server messages in chat windows.

   *Chat.errforeground Color of error messages in chat windows.

   *Chat.urlforeground Color of URLs in chat windows.

   *Chat.urlactiveforeground Color of mouse highlighted URLs in chat
      windows.

   *JDisco.fill Default color of items in Service Discovery Browser.

   *JDisco.featurecolor Default color of feature items in Service
      Discovery Browser.

   *JDisco.identitycolor Default color of identity items in Service
      Discovery Browser.

   *JDisco.optioncolor Default color of option items in Service
      Discovery Browser.

   *JDisco*Tree*background Default color of background in Service
      Discovery Browser.

   *NoteBook.alertColor0

   *NoteBook.alertColor1

   *NoteBook.alertColor2

   *NoteBook.alertColor3 Tabs alert colors.

   *Roster.cbackground Roster background color.

   *Roster.groupindent Indentation for group title.

   *Roster.groupiconindent Indentation for group icon.







Shchepin, et al.                                               [Page 53]

                             Tkabber 0.11.0                    June 2008


   *Roster.jidindent Indentation for item name.

   *Roster.jidmultindent Indentation for item with multiple resources.

   *Roster.subjidindent Indentation for item resource.

   *Roster.iconindent Indentation for item icon.

   *Roster.subitemtype

   *Roster.subiconindent Indentation for resource icon.

   *Roster.textuppad Top pad for item's names.

   *Roster.textdownpad Bottom pad for item's names.

   *Roster.linepad Vertical distance between items.

   *Roster.foreground Color of item's names.

   *Roster.jidfill Background of roster item.

   *Roster.jidhlfill Background of roster item when mouse is over.

   *Roster.jidborder Color of item's border.

   *Roster.groupfill

   *Roster.grouphlfill

   *Roster.groupborder The same to roster groups.

   *Roster.groupcfill Background color of collapsed group.

   *Roster.stalkerforeground

   *Roster.unavailableforeground

   *Roster.dndforeground

   *Roster.xaforeground

   *Roster.awayforeground

   *Roster.availableforeground






Shchepin, et al.                                               [Page 54]

                             Tkabber 0.11.0                    June 2008


   *Roster.chatforeground Colors of item name for different presences.


















































Shchepin, et al.                                               [Page 55]

                             Tkabber 0.11.0                    June 2008


Appendix C.  Documentation TODO

   The next revision of this documentation should discuss:

   o  Pre-load:

      *  "browseurl"

   o  Post-load:

      *  "chat_height" and "chat_width" (appear to be no-ops).

   o  Menu-load:

      *  "change_password_dialog"

      *  "conference::create_room_dialog"

      *  "disco::browser::open_win"

      *  "message::send_msg"

      *  "privacy::request_lists"

      *  "rawxml::open_window"

      *  "userinfo::show_info_dialog"

   o  Hooks: the additional payload format.






















Shchepin, et al.                                               [Page 56]

                             Tkabber 0.11.0                    June 2008


Appendix D.  Acknowledgements

   Rebecca Malamud was kind enough to design the "enlightened feather"
   motif used in the _Tkabber_ look-and-feel.

   The "new look" appeared in the 0.10.0 release ("golden feather" and
   "blue feather" pixmap themes and the "Earth bulb" logo) was designed
   by Artem Bannikov.











































Shchepin, et al.                                               [Page 57]

                             Tkabber 0.11.0                    June 2008


Appendix E.  Copyrights

   Copyright (c) 2002-2008 Alexey Shchepin

   _Tkabber_ is free software; you can redistribute it and/or modify it
   under the terms of the GNU General Public License as published by the
   Free Software Foundation; either version 2 of the License, or (at
   your option) any later version.

   _Tkabber_ is distributed in the hope that it will be useful, but
   WITHOUT ANY WARRANTY; without even the implied warranty of
   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
   General Public License for more details.






































Shchepin, et al.                                               [Page 58]

                             Tkabber 0.11.0                    June 2008


Authors' Addresses

   Alexey Yurievich Shchepin
   Process-One

   Email: alexey@process-one.net


   Marshall T. Rose
   Dover Beach Consulting, Inc.
   POB 255268
   Sacramento, CA  95865-5268
   US

   Phone: +1 916 483 8878
   Fax:   +1 916 483 8848
   Email: mrose@dbc.mtview.ca.us


   Sergei Golovan
   New Economic School

   Email: sgolovan@nes.ru


   Michail Yurievich Litvak
   Colocall Ltd.

   Email: mci@shadow.in.ua


   Konstantin Khomoutov
   Service 007

   Email: khomoutov@gmail.com
















Shchepin, et al.                                               [Page 59]