# Startup options
startup.controlPassword
startup.interface.ipAddress 127.0.0.1
startup.interface.port 9051
startup.interface.socket /var/run/tor/control
startup.blindModeEnabled false
startup.events N3
startup.dataDirectory ~/.arm

# Seconds between querying information
queries.resourceUsage.rate 5
queries.connections.minRate 5
queries.refreshRate.rate 5

# allows individual panels to be included/excluded
features.panels.show.graph true
features.panels.show.log true
features.panels.show.connection true
features.panels.show.config true
features.panels.show.torrc true
features.panels.show.interpretor true

# Read the proc contents directly instead of calling ps, netstat, and other
# resolvers. This provides very sizable performance benefits (around 90%
# faster lookups) but this is only available on Linux.
queries.useProc true

# Renders the interface with color if set and the terminal supports it
features.colorInterface true

# Uses ACS (alternate character support) to display nice borders. This may not
# work on all terminals.
features.acsSupport true

# Replaces all colored content (ie, anything that isn't white) with this
# color. Valid options are:
# none, red, green, yellow, blue, cyan, magenta, black, white
features.colorOverride none

# If arm is attached to an arm started tor instance when it shuts down then
# offers to shut down tor too if true, otherwise skips this prompt.
features.offerTorShutdownOnQuit false

# Includes unicode characters in the interface.
features.printUnicode true

# Checks the torrc for issues, warning and hilighting problems if true
features.torrc.validate true

# Set this if you're running in a chroot jail or other environment where tor's
# resources (log, state, etc) should have a prefix in their paths.
features.pathPrefix

# If set, arm appends any log messages it reports while running to the given
# log file. This does not take filters into account or include prepopulated
# events.
features.logFile 

# If true, the header panel always shows the file descriptor usage. Otherwise
# this is only displayed when we're running out.
features.showFdUsage false

# Seconds to wait on user input before refreshing content
features.redrawRate 5

# Rate (seconds) to periodically redraw the screen, disabled if zero. This
# shouldn't be necessary, but can correct issues if the terminal gets into a
# funky state.
features.refreshRate 5

# Confirms promt to confirm when quiting if true
features.confirmQuit true

# Allows arm to start when there's no running tor instance if true, otherwise
# we terminate right away. This is ignored if the user provides an option
# specifying how to connect to tor (ie, a 'startup.interface.*' option or
# startup argument).
features.allowDetachedStartup true

# Paremters for the log panel
# ---------------------------
# showDateDividers
#   show borders with dates for entries from previous days
# showDuplicateEntries
#   shows all log entries if true, otherwise collapses similar entries with an
#   indicator for how much is being hidden
# entryDuration
#   number of days log entries are kept before being dropped (if zero then
#   they're kept until cropped due to caching limits)
# maxLinesPerEntry
#   max number of lines to display for a single log entry
# prepopulate
#   attempts to read past events from the log file if true
# prepopulateReadLimit
#   maximum entries read from the log file, used to prevent huge log files from
#   causing a slow startup time.
# maxRefreshRate
#   rate limiting (in milliseconds) for drawing the log if updates are made
#   rapidly (for instance, when at the DEBUG runlevel)
# regex
#   preconfigured regular expression pattern, up to five will be loaded

features.log.showDateDividers true
features.log.showDuplicateEntries false
features.log.entryDuration 7
features.log.maxLinesPerEntry 6
features.log.prepopulate true
features.log.prepopulateReadLimit 5000
features.log.maxRefreshRate 300
#features.log.regex My First Regex Pattern
#features.log.regex ^My Second Regex Pattern$

# Paremters for the config panel
# ---------------------------
# order
#   three comma separated configuration attributes, options including:
#   0 -> Category,  1 -> Option Name,   2 -> Value,       3 -> Arg Type,
#   4 -> Arg Usage, 5 -> Summary,       6 -> Description, 7 -> Man Entry,
#   8 -> Is Default
# selectionDetails.height
#   rows of data for the panel showing details on the current selection, this
#   is disabled entirely if zero
# features.config.prepopulateEditValues
#   when editing config values the current value is prepopulated if true, and
#   left blank otherwise
# state.colWidth.*
#   column content width
# state.showPrivateOptions
#   tor provides config options of the form "__<option>" that can be dangerous
#   to set, if true arm provides these on the config panel
# state.showVirtualOptions
#   virtual options are placeholders for other option groups, never having
#   values or being setable themselves
# file.showScrollbars
#   displays scrollbars when the torrc content is longer than the display
# file.maxLinesPerEntry
#   max number of lines to display for a single entry in the torrc

features.config.order 7, 1, 8
features.config.selectionDetails.height 6
features.config.prepopulateEditValues true
features.config.state.colWidth.option 25
features.config.state.colWidth.value 15
features.config.state.showPrivateOptions false
features.config.state.showVirtualOptions false
features.config.file.showScrollbars true
features.config.file.maxLinesPerEntry 8

# Descriptions for tor's configuration options can be loaded from its man page
# to give usage information on the settings page. They can also be persisted to
# a file to speed future lookups.
# ---------------------------
# enabled
#   allows the descriptions to be fetched from the man page if true
# persist
#   caches the descriptions (substantially saving on future startup times)

features.config.descriptions.enabled true
features.config.descriptions.persist true

# General graph parameters
# ------------------------
# height
#   height of graphed stats
# maxWidth
#   maximum number of graphed entries
# interval
#   0 -> each second,   1 -> 5 seconds,     2 -> 30 seconds,  3 -> minutely,      
#   4 -> 15 minutes,    5 -> half hour,     6 -> hourly,      7 -> daily
# bound
#   0 -> global maxima, 1 -> local maxima,  2 -> tight
# type
#   0 -> None, 1 -> Bandwidth, 2 -> Connections, 3 -> System Resources
# showIntermediateBounds
#   shows y-axis increments between the top/bottom bounds

features.graph.height 7
features.graph.maxWidth 150
features.graph.interval 0
features.graph.bound 1
features.graph.type 1
features.graph.showIntermediateBounds true

# Parameters for graphing bandwidth stats
# ---------------------------------------
# prepopulate
#   attempts to use tor's state file to prepopulate the bandwidth graph at the
#   15-minute interval (this requires the minimum of a day's worth of uptime)
# transferInBystes
#   shows rate measurments in bytes if true, bits otherwise
# accounting.show
#   provides accounting stats if AccountingMax was set
# accounting.rate
#   seconds between querying accounting stats
# accounting.isTimeLong
#   provides verbose measurements of time if true

features.graph.bw.prepopulate true
features.graph.bw.transferInBytes false
features.graph.bw.accounting.show true
features.graph.bw.accounting.rate 10
features.graph.bw.accounting.isTimeLong false

# Parameters for connection display
# ---------------------------------
# listingType
#   the primary category of information shown by default, options including:
#   0 -> IP Address / Port              1 -> Hostname
#   2 -> Fingerprint                    3 -> Nickname
# order
#   three comma separated configuration attributes, options including:
#   0 -> Category,  1 -> Uptime,        2 -> Listing,     3 -> IP Address,
#   4 -> Port,      5 -> Hostname,      6 -> Fingerprint, 7 -> Nickname,
#   8 -> Country
# refreshRate
#   rate at which the connection panel contents is redrawn (if higher than the
#   connection resolution rate then reducing this won't casue new data to
#   appear more frequently - just increase the rate at which the uptime field
#   is updated)
# resolveApps
#   issues lsof queries to determining the applications involved in local
#   SOCKS and CONTROL connections
# markInitialConnections
#   if true, the uptime of the initial connections when we start are marked
#   with a '+' (these uptimes are estimates since arm can only track a
#   connection's duration while it runs)
# showIps
#   shows ip addresses for other tor relays, dropping this information if
#   false
# showExitPort
#   shows port related information of exit connections we relay if true
# showColumn.*
#   toggles the visability of the connection table columns

features.connection.listingType 0
features.connection.order 0, 2, 1
features.connection.refreshRate 5
features.connection.resolveApps true
features.connection.markInitialConnections true
features.connection.showIps true
features.connection.showExitPort true
features.connection.showColumn.fingerprint true
features.connection.showColumn.nickname true
features.connection.showColumn.destination true
features.connection.showColumn.expandedIp true

# Thread pool size for hostname resolutions
# Determines the maximum number of concurrent requests. Upping this to around
# thirty or so seems to be problematic, causing intermittently seizing.

queries.hostnames.poolSize 5

# Method of resolving hostnames
# If true, uses python's internal "socket.gethostbyaddr" to resolve addresses
# rather than the host command. This is ignored if the system's unable to make
# parallel requests. Resolving this way seems to be much slower than host calls
# in practice.

queries.hostnames.useSocketModule false

# Caching parameters
cache.sysCalls.size 600
cache.hostnames.size 700000
cache.hostnames.trimSize 200000
cache.logPanel.size 1000
cache.armLog.size 1000
cache.armLog.trimSize 200

# Runlevels at which arm logs its events
log.startTime INFO
log.configEntryNotFound NONE
log.configEntryUndefined NOTICE
log.configEntryTypeError NOTICE
log.torCtlPortClosed NOTICE
log.torGetInfo DEBUG
log.torGetInfoCache NONE
log.torGetConf DEBUG
log.torGetConfCache NONE
log.torSetConf INFO
log.torEventTypeUnrecognized INFO
log.torPrefixPathInvalid NOTICE
log.procCallMade DEBUG
log.sysCallMade DEBUG
log.sysCallCached NONE
log.sysCallFailed INFO
log.sysCallCacheGrowing INFO
log.panelRecreated DEBUG
log.graph.bw.prepopulateSuccess NOTICE
log.graph.bw.prepopulateFailure NOTICE
log.logPanel.prepopulateSuccess INFO
log.logPanel.prepopulateFailed WARN
log.logPanel.logFileOpened NOTICE
log.logPanel.logFileWriteFailed ERR
log.logPanel.forceDoubleRedraw DEBUG
log.torrc.readFailed WARN
log.torrc.validation.torStateDiffers WARN
log.torrc.validation.unnecessaryTorrcEntries NOTICE
log.configDescriptions.readManPageSuccess INFO
log.configDescriptions.readManPageFailed NOTICE
log.configDescriptions.unrecognizedCategory NOTICE
log.configDescriptions.internalLoadSuccess NOTICE
log.configDescriptions.internalLoadFailed ERR
log.configDescriptions.persistance.loadSuccess INFO
log.configDescriptions.persistance.loadFailed INFO
log.configDescriptions.persistance.saveSuccess NOTICE
log.configDescriptions.persistance.saveFailed NOTICE
log.connResolverOptions INFO
log.connLookupFailed INFO
log.connLookupFailover NOTICE
log.connLookupAbandon NOTICE
log.connLookupRateGrowing NONE
log.hostnameCacheTrimmed INFO
log.cursesColorSupport INFO
log.bsdJailFound INFO
log.unknownBsdJailId WARN
log.geoipUnavailable WARN
log.stats.failedProcResolution DEBUG
log.stats.procResolutionFailover INFO
log.stats.failedPsResolution INFO
log.savingDebugLog NOTICE
log.fdUsageSixtyPercent NOTICE
log.fdUsageNinetyPercent WARN
log.unknownTorPid WARN