1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
|
=======================================
:mod:`leica_tcr_1205` -- Leica TCR 1205
=======================================
.. moduleauthor:: Stefano Costa <steko@iosa.it>
.. moduleauthor:: Luca Bianconi <luxetluc@yahoo.it>
Description
-----------
This is a quite recent total station. Data were provided by Joseph Reeves of
Oxford Archaeology.
Connection
----------
:Baudrate: higher than 19200
:Bytesize: 8
:StopBits: 1
:Parity: None
Data format
-----------
The data format is ASCII, quite simple.
The only thing to note is that data dumps contain both relative and absolute
measures.
:ref:`if_leica_tcr_1205`
=====================================
:mod:`nikon_npl_322plus` -- Nikon NPL-322+
=====================================
.. moduleauthor:: Sebastian Gutwein
.. versionadded:: 0.6
Description
-----------
Tested on a NPL 322+ but should also work with other NPL 322 models.
Connection
----------
Tested using a serial cable with an usb adaptor.
:Baudrate: 9600
:Bytesize: 8
:StopBits: 1
:Parity: None
Data format
-----------
The data format is in ASCII format.
:ref:`if_nikon_raw`
=====================================
:mod:`nikon_npl_350` -- Nikon NPL-350
=====================================
.. moduleauthor:: Stefano Costa <steko@iosa.it>
Description
-----------
Connection
----------
Even the brute method ``cat /dev/ttyS0 > file`` creates an ASCII file without
any problem, so probably the default parameters for the serial port are OK.
:Baudrate: higher than 19200
:Bytesize: 8
:StopBits: 1
:Parity: None
Data format
-----------
The data format is in ASCII format.
:ref:`if_nikon_raw`
=======================================
:mod:`trimble` -- Trimble
=======================================
.. moduleauthor:: Stefano Costa <steko@iosa.it>
Description
-----------
Connection
----------
:Baudrate: 9600
:Bytesize: 8
:StopBits: 1
:Parity: None
Data format
-----------
The data format is ASCII, quite simple.
:ref:`if_trimble_are`
=======================================
:mod:`zeiss_elta_r55` -- Zeiss Elta R55
=======================================
.. moduleauthor:: Stefano Costa <steko@iosa.it>
Description
-----------
This is a quite old device, in use at the University of Siena. The
first steps in TOPS development were achieved with it.
Connection
----------
The hardware interface consists of a serial RS232 cable, that works also with
a common :term:`serial-USB adapter` .
:Baudrate: 9600
:Bytesize: 7
:Parity: None
Output formats
--------------
The Zeiss Elta R55 total station can output data in four different
formats, only one of which is currently supported:
- :ref:`if_zeiss_rec_500`
- Zeiss R-4
- Zeiss R-5
- Zeiss R-E
|
