#ifndef XCOMM
#define XCOMM #
#endif

XCOMM Fig2dev : General Fig code translation program
XCOMM Copyright (c) 1991 Micah Beck
XCOMM Parts Copyright (c) 1995-2002 by Brian V. Smith
XCOMM Parts Copyright (c) 1999 by T. Sato

XCOMM Any party obtaining a copy of these files is granted, free of charge, a
XCOMM full and unrestricted irrevocable, world-wide, paid up, royalty-free,
XCOMM nonexclusive right and license to deal in this software and
XCOMM documentation files (the "Software"), including without limitation the
XCOMM rights to use, copy, modify, merge, publish and/or distribute copies of
XCOMM the Software, and to permit persons who receive copies from any such 
XCOMM party to do so, with the only requirement being that this copyright 
XCOMM notice remain intact.

XCOMM ******
XCOMM If you want to install fig2dev in a directory other than the default X11 binary
XCOMM directory, uncomment the following "BINDIR" line and change the path
XCOMM to the full path of the directory where you want fig2dev to be installed.
XCOMM Also, you may have to uncomment and redefine MKDIRHIER because "make" looks
XCOMM for it relative to the BINDIR variable.
XCOMM
XCOMM BINDIR = /usr/bin/X11
XCOMM MKDIRHIER = /bin/sh /usr/bin/X11/mkdirhier -p

XCOMM MANDIR tells where the standard man pages should go (no need to change it
XCOMM if you want the man pages installed in the standard place on your system
XCOMM MANDIR = $(MANSOURCEPATH)$(MANSUFFIX)

XCOMM ******
XCOMM You should point XFIGLIBDIR to the same directory you did when you compiled
XCOMM and installed xfig.

XFIGLIBDIR =	/usr/share/xfig

XCOMM ******
XCOMM If your system doesn't have the strerror() function (has sys_errlist) then
XCOMM uncomment NEED_STRERROR.

XCOMM NEED_STRERROR = -DNEED_STRERROR

XCOMM The following probably only applies to Windows 9x/NT:
XCOMM If your system can open files in text and binary modes and has the
XCOMM setmode() function, uncomment HAVE_SETMODE

XCOMM HAVE_SETMODE = -DHAVE_SETMODE

XCOMM ****************
XCOMM Uncomment the following line if your compiler supports
XCOMM inline functions. With the "INLINE" keyword, you should notice that
XCOMM the display will be a bit faster in complex figures

USEINLINE = -DUSE_INLINE

XCOMM ****************
XCOMM Change RGB if necessary, to point to your rgb.txt color database
XCOMM file (for X11).  This is needed for the -g (background color) option.
XCOMM Note that this changed slightly from the previous versions - you need
XCOMM the full name (rgb.txt) now.
XCOMM

RGB = /etc/X11/rgb.txt

XCOMM Comment out the following #define USEPNG if you don't want PNG support
XCOMM Uncomment the #define for USEPNG if you want to be able to import
XCOMM PNG (Portable Network Graphics) files.

#define USEPNG

XCOMM Redefine the following if your PNG library, zlib library and/or include
XCOMM file are in different places

#ifdef USEPNG
PNGLIBDIR = $(USRLIBDIR)
ZLIBDIR = $(USRLIBDIR)
PNGINC = -I/usr/include/X11
#endif

XCOMM ****************
XCOMM Uncomment the #define for USEXPM if you want to use the XPM
XCOMM (color pixmap) package.
XCOMM You need version 3.4c or newer of the XPM package.
XCOMM
XCOMM Change XPMLIBDIR if necessary to point to the xpm library (libXpm)
XCOMM Change XPMINC if necessary to point to the include file for xpm (xpm.h)
XCOMM

#define USEXPM

#ifdef USEXPM
XPMLIBDIR = $(USRLIBDIR)
XPMINC = -I/usr/include/X11
#endif

XCOMM ****************
XCOMM Uncomment the following to set default paper size to A4
DDA4 = -DA4

XCOMM ****************
XCOMM Uncomment the following to set IBM Graphics Enhancement Cartridge
XCOMM DDIBMGEC = -DIBMGEC

XCOMM ****************
XCOMM Comment out the DDNFSS = ... line if you don't want NFSS2 font selection
XCOMM	for LaTeX texts
XCOMM Comment out the DDLATEX2E_GRAPHICS = ... line if you don't want to use the
XCOMM	standard graphics package distributed w/ LaTeX2e
XCOMM UNcomment the DDEPSFIG = ... line if you want to use the deprecated epsfig macros
XCOMM	distributed w/ LaTeX2e (DDLATEX2E_GRAPHICS must also be defined)
XCOMM
XCOMM     Hint: Users of LaTeX2e will probably want to include both DDNFSS
XCOMM		and DDLATEX2E_GRAPHICS options; users of LaTeX 2.09 will
XCOMM		probably want to include neither.

DDNFSS = -DNFSS
DDLATEX2E_GRAPHICS = -DLATEX2E_GRAPHICS
XCOMM DDEPSFIG = -DEPSFIG

XCOMM ****************
XCOMM Comment out the DDDVIPS to NOT use dvips for the DVI-to-PostScript driver
DDDVIPS = -DDVIPS

XCOMM ****************
XCOMM If your system doesn't have strcasecmp and/or strncasecmp
XCOMM uncomment the following two definitions

XCOMM HAVE_NO_STRCASECMP = -DHAVE_NO_STRCASECMP
XCOMM HAVE_NO_STRNCASECMP = -DHAVE_NO_STRNCASECMP

XCOMM ****************
XCOMM If your system doesn't have strstr() then uncomment the following line
XCOMM #define NOSTRSTR

XCOMM ****************
XCOMM Comment out the next line if you have any problems with locale not being found

#define I18N

#ifdef I18N
I18N_DEFS = -DI18N 
FIG2DEV_LIBDIR = /usr/share/xfig/fig2dev
I18N_DEV_DEFS = $(I18N_DEFS) -DFIG2DEV_LIBDIR=$(FIG2DEV_LIBDIR) -DFIG2DEV_LIBDIR_STR=\\\"$(FIG2DEV_LIBDIR)\\\"

#endif /* I18N */

XCOMM **************************************************************
XCOMM *** You shouldn't have to change anything below this point ***
XCOMM **************************************************************

DIR_DEFS=	-DBITMAPDIR=\\\"$(DESTDIR)$(XFIGLIBDIR)/bitmaps\\\"

#ifdef USEPNG
DUSEPNG = -DUSE_PNG
PNGLIBS = -L$(PNGLIBDIR) -lpng
#endif /* USEPNG */

#ifdef USEXPM
DUSEXPM = -DUSE_XPM
XPMLIBS = -L$(XPMLIBDIR) -lXpm
#endif /* USEXPM */

#if defined(NOSTRSTR) 
STRSTRC=	strstr.c
STRSTRO=	strstr.o
#endif /* defined(NOSTRSTR) */

DEFINES = $(NEED_STRERROR) $(HAVE_NO_STRCASECMP) $(HAVE_NO_STRNCASECMP) $(DDNFSS) $(USEINLINE) \
	$(I18N_DEFS) $(HAVE_SETMODE) $(DUSEPNG) $(DUSEXPM) $(PNGINC) $(XPMINC)


IMAKE_DEFINES = $(DUSEPNG) $(DUSEXPM) $(I18N_DEV_DEFS) 

DEVDEFINES = $(DUSEPNG) $(DUSEXPM) $(PNGINC) $(XPMINC) $(DDNFSS) $(DDA4) \
		$(DDLATEX2E_GRAPHICS) $(DDEPSFIG) $(DDIBMGEC) $(DDDVIPS) $(I18N_DEV_DEFS)

#define IHaveSubdirs
#define PassCDebugFlags 'CDEBUGFLAGS=$(CDEBUGFLAGS)'

DEVDIR = dev

SUBDIRS = $(DEVDIR)

LIBTRANSFIG = $(DEVDIR)/libtransfig.a

INCLUDES = -I..

LOCAL_LIBRARIES = $(LIBTRANSFIG)
#if defined(NetBSDArchitecture) || defined(FreeBSDArchitecture)
SYS_LIBRARIES = $(PNGLIBS) $(XPMLIBS) -lm -lcompat
#else
SYS_LIBRARIES = $(PNGLIBS) $(XPMLIBS) -lm
#endif
DEPLIBS = $(LIBTRANSFIG)

#if !(defined(SunOSPlatform) && (OSMajorVersion>=5))
GETOPTC=   getopt.c
GETOPTO=   getopt.o
#endif

SRCS = fig2dev.c psfonts.c iso2tex.c arrow.c bound.c colors.c trans_spline.c \
	free.c read.c read1_3.c latex_line.c localmath.c $(STRSTRC) $(GETOPTC)
OBJS = fig2dev.o psfonts.o iso2tex.o arrow.o bound.o colors.o trans_spline.o \
	free.o read.o read1_3.o latex_line.o localmath.o $(STRSTRO) $(GETOPTO)

fig2dev: $(DEPLIBS)

RGBFILE = -DRGB_FILE=\"$(RGB)\"
SpecialObjectRule(colors.o, Imakefile , $(RGBFILE))
SpecialObjectRule(fig2dev.o, fig2dev.c drivers.h ../patchlevel.h, )

XCOMM only compile our jpeg if the use doesn't have one installed

$(LIBTRANSFIG)::
	cd $(DEVDIR); $(MAKE) DEFINES="$(DEVDEFINES) $(DIR_DEFS)" libtransfig.a

DependSubdirs($(SUBDIRS))

ComplexProgramTarget(fig2dev)

all:: fig2dev.man fig2ps2tex.man pic2tpic.man

XCOMM Install the tk bitmaps here
install::
	@(cd bitmaps ; \
	if [ -d $(DESTDIR)$(XFIGLIBDIR)/bitmaps ]; then set +x; \
	else (set -x; $(MKDIRHIER) $(DESTDIR)$(XFIGLIBDIR)/bitmaps ); fi ; \
	echo Copying bitmap files for tk to $(DESTDIR)$(XFIGLIBDIR)/bitmaps ; \
	for f in * ; do \
	      $(INSTALL) -m644 $$f $(DESTDIR)$(XFIGLIBDIR)/bitmaps ; \
	done) ; 

install.all::
	$(MAKE) install
	$(MAKE) install.man

InstallScript(fig2ps2tex,$(BINDIR))
InstallScript(fig2ps2tex.sh,$(BINDIR))
InstallScript(pic2tpic,$(BINDIR))

InstallManPage(fig2ps2tex,$(MANDIR))
InstallManPage(pic2tpic,$(MANDIR))

fig2dev.man:: ../doc/fig2dev.1
	$(RM) fig2dev.man
	-$(LN) ../doc/fig2dev.1 fig2dev.man

fig2ps2tex.man:: ../doc/fig2ps2tex.1
	$(RM) fig2ps2tex.man
	-$(LN) ../doc/fig2ps2tex.1 fig2ps2tex.man

pic2tpic.man:: ../doc/pic2tpic.1
	$(RM) pic2tpic.man
	-$(LN) ../doc/pic2tpic.1 pic2tpic.man