1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
|
/*
* (C) Copyright 2014 DENX Software Engineering
* Heiko Schocher <hs@denx.de>
*
* Based on:
* Copyright (C) 2013 Atmel Corporation
* Bo Shen <voice.shen@atmel.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/at91_common.h>
#include <asm/arch/at91sam9_matrix.h>
#include <asm/arch/at91_pit.h>
#include <asm/arch/at91_rstc.h>
#include <asm/arch/at91_wdt.h>
#include <asm/arch/clk.h>
#include <spl.h>
DECLARE_GLOBAL_DATA_PTR;
static void enable_ext_reset(void)
{
struct at91_rstc *rstc = (struct at91_rstc *)ATMEL_BASE_RSTC;
writel(AT91_RSTC_KEY | AT91_RSTC_MR_URSTEN, &rstc->mr);
}
void lowlevel_clock_init(void)
{
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
if (!(readl(&pmc->sr) & AT91_PMC_MOSCS)) {
/* Enable Main Oscillator */
writel(AT91_PMC_MOSCS | (0x40 << 8), &pmc->mor);
/* Wait until Main Oscillator is stable */
while (!(readl(&pmc->sr) & AT91_PMC_MOSCS))
;
}
/* After stabilization, switch to Main Oscillator */
if ((readl(&pmc->mckr) & AT91_PMC_CSS) == AT91_PMC_CSS_SLOW) {
unsigned long tmp;
tmp = readl(&pmc->mckr);
tmp &= ~AT91_PMC_CSS;
tmp |= AT91_PMC_CSS_MAIN;
writel(tmp, &pmc->mckr);
while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
;
tmp &= ~AT91_PMC_PRES;
tmp |= AT91_PMC_PRES_1;
writel(tmp, &pmc->mckr);
while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
;
}
return;
}
void __weak matrix_init(void)
{
}
void __weak at91_spl_board_init(void)
{
}
void __weak spl_board_init(void)
{
}
void board_init_f(ulong dummy)
{
lowlevel_clock_init();
at91_disable_wdt();
/*
* At this stage the main oscillator is supposed to be enabled
* PCK = MCK = MOSC
*/
at91_pllicpr_init(0x00);
/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
at91_plla_init(CONFIG_SYS_AT91_PLLA);
/* PCK = PLLA = 2 * MCK */
at91_mck_init(CONFIG_SYS_MCKR);
/* Switch MCK on PLLA output */
at91_mck_init(CONFIG_SYS_MCKR_CSS);
#if defined(CONFIG_SYS_AT91_PLLB)
/* Configure PLLB */
at91_pllb_init(CONFIG_SYS_AT91_PLLB);
#endif
/* Enable External Reset */
enable_ext_reset();
/* Initialize matrix */
matrix_init();
gd->arch.mck_rate_hz = CONFIG_SYS_MASTER_CLOCK;
/*
* init timer long enough for using in spl.
*/
timer_init();
/* enable clocks for all PIOs */
#if defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9N12)
at91_periph_clk_enable(ATMEL_ID_PIOAB);
at91_periph_clk_enable(ATMEL_ID_PIOCD);
#else
at91_periph_clk_enable(ATMEL_ID_PIOA);
at91_periph_clk_enable(ATMEL_ID_PIOB);
at91_periph_clk_enable(ATMEL_ID_PIOC);
#endif
#if defined(CONFIG_SPL_SERIAL_SUPPORT)
/* init console */
at91_seriald_hw_init();
preloader_console_init();
#endif
mem_init();
at91_spl_board_init();
}
|
