1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
|
/*
* UniPhier SG (SoC Glue) block registers
*
* Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef ARCH_SG_REGS_H
#define ARCH_SG_REGS_H
/* Base Address */
#define SG_CTRL_BASE 0x5f800000
#define SG_DBG_BASE 0x5f900000
/* Revision */
#define SG_REVISION (SG_CTRL_BASE | 0x0000)
#define SG_REVISION_TYPE_SHIFT 16
#define SG_REVISION_TYPE_MASK (0xff << SG_REVISION_TYPE_SHIFT)
#define SG_REVISION_MODEL_SHIFT 8
#define SG_REVISION_MODEL_MASK (0x3 << SG_REVISION_MODEL_SHIFT)
#define SG_REVISION_REV_SHIFT 0
#define SG_REVISION_REV_MASK (0x1f << SG_REVISION_REV_SHIFT)
/* Memory Configuration */
#define SG_MEMCONF (SG_CTRL_BASE | 0x0400)
#define SG_MEMCONF_CH0_SZ_MASK ((0x1 << 10) | (0x03 << 0))
#define SG_MEMCONF_CH0_SZ_64M ((0x0 << 10) | (0x01 << 0))
#define SG_MEMCONF_CH0_SZ_128M ((0x0 << 10) | (0x02 << 0))
#define SG_MEMCONF_CH0_SZ_256M ((0x0 << 10) | (0x03 << 0))
#define SG_MEMCONF_CH0_SZ_512M ((0x1 << 10) | (0x00 << 0))
#define SG_MEMCONF_CH0_SZ_1G ((0x1 << 10) | (0x01 << 0))
#define SG_MEMCONF_CH0_NUM_MASK (0x1 << 8)
#define SG_MEMCONF_CH0_NUM_1 (0x1 << 8)
#define SG_MEMCONF_CH0_NUM_2 (0x0 << 8)
#define SG_MEMCONF_CH1_SZ_MASK ((0x1 << 11) | (0x03 << 2))
#define SG_MEMCONF_CH1_SZ_64M ((0x0 << 11) | (0x01 << 2))
#define SG_MEMCONF_CH1_SZ_128M ((0x0 << 11) | (0x02 << 2))
#define SG_MEMCONF_CH1_SZ_256M ((0x0 << 11) | (0x03 << 2))
#define SG_MEMCONF_CH1_SZ_512M ((0x1 << 11) | (0x00 << 2))
#define SG_MEMCONF_CH1_SZ_1G ((0x1 << 11) | (0x01 << 2))
#define SG_MEMCONF_CH1_NUM_MASK (0x1 << 9)
#define SG_MEMCONF_CH1_NUM_1 (0x1 << 9)
#define SG_MEMCONF_CH1_NUM_2 (0x0 << 9)
#define SG_MEMCONF_CH2_SZ_MASK ((0x1 << 26) | (0x03 << 16))
#define SG_MEMCONF_CH2_SZ_64M ((0x0 << 26) | (0x01 << 16))
#define SG_MEMCONF_CH2_SZ_128M ((0x0 << 26) | (0x02 << 16))
#define SG_MEMCONF_CH2_SZ_256M ((0x0 << 26) | (0x03 << 16))
#define SG_MEMCONF_CH2_SZ_512M ((0x1 << 26) | (0x00 << 16))
#define SG_MEMCONF_CH2_SZ_1G ((0x1 << 26) | (0x01 << 16))
#define SG_MEMCONF_CH2_NUM_MASK (0x1 << 24)
#define SG_MEMCONF_CH2_NUM_1 (0x1 << 24)
#define SG_MEMCONF_CH2_NUM_2 (0x0 << 24)
/* PH1-LD6b, ProXstream2, PH1-LD20 only */
#define SG_MEMCONF_CH2_DISABLE (0x1 << 21)
#define SG_MEMCONF_SPARSEMEM (0x1 << 4)
#define SG_ETPHYPSHUT (SG_CTRL_BASE | 0x554)
#define SG_ETPHYCNT (SG_CTRL_BASE | 0x550)
/* Pin Control */
#define SG_PINCTRL_BASE (SG_CTRL_BASE | 0x1000)
/* PH1-Pro4, PH1-Pro5 */
#define SG_LOADPINCTRL (SG_CTRL_BASE | 0x1700)
/* Input Enable */
#define SG_IECTRL (SG_CTRL_BASE | 0x1d00)
/* Pin Monitor */
#define SG_PINMON0 (SG_DBG_BASE | 0x0100)
#define SG_PINMON0_CLK_MODE_UPLLSRC_MASK (0x3 << 19)
#define SG_PINMON0_CLK_MODE_UPLLSRC_DEFAULT (0x0 << 19)
#define SG_PINMON0_CLK_MODE_UPLLSRC_VPLL27A (0x2 << 19)
#define SG_PINMON0_CLK_MODE_UPLLSRC_VPLL27B (0x3 << 19)
#define SG_PINMON0_CLK_MODE_AXOSEL_MASK (0x3 << 16)
#define SG_PINMON0_CLK_MODE_AXOSEL_24576KHZ (0x0 << 16)
#define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ (0x1 << 16)
#define SG_PINMON0_CLK_MODE_AXOSEL_6144KHZ (0x2 << 16)
#define SG_PINMON0_CLK_MODE_AXOSEL_6250KHZ (0x3 << 16)
#define SG_PINMON0_CLK_MODE_AXOSEL_DEFAULT (0x0 << 16)
#define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_U (0x1 << 16)
#define SG_PINMON0_CLK_MODE_AXOSEL_20480KHZ (0x2 << 16)
#define SG_PINMON0_CLK_MODE_AXOSEL_25000KHZ_A (0x3 << 16)
#ifdef __ASSEMBLY__
.macro sg_set_pinsel, pin, muxval, mux_bits, reg_stride, ra, rd
ldr \ra, =(SG_PINCTRL_BASE + \pin * \mux_bits / 32 * \reg_stride)
ldr \rd, [\ra]
and \rd, \rd, #~(((1 << \mux_bits) - 1) << (\pin * \mux_bits % 32))
orr \rd, \rd, #(\muxval << (\pin * \mux_bits % 32))
str \rd, [\ra]
.endm
#else
#include <linux/types.h>
#include <linux/io.h>
static inline void sg_set_pinsel(unsigned pin, unsigned muxval,
unsigned mux_bits, unsigned reg_stride)
{
unsigned shift = pin * mux_bits % 32;
unsigned long reg = SG_PINCTRL_BASE + pin * mux_bits / 32 * reg_stride;
u32 mask = (1U << mux_bits) - 1;
u32 tmp;
tmp = readl(reg);
tmp &= ~(mask << shift);
tmp |= (mask & muxval) << shift;
writel(tmp, reg);
}
static inline void sg_set_iectrl(unsigned pin)
{
unsigned bit = pin % 32;
unsigned long reg = SG_IECTRL + pin / 32 * 4;
u32 tmp;
tmp = readl(reg);
tmp |= 1 << bit;
writel(tmp, reg);
}
static inline void sg_set_iectrl_range(unsigned min, unsigned max)
{
int i;
for (i = min; i <= max; i++)
sg_set_iectrl(i);
}
#endif /* __ASSEMBLY__ */
#endif /* ARCH_SG_REGS_H */
|
