1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
|
/***********************************************************************
*
* (C) Copyright 2004-2009
* DENX Software Engineering
* Wolfgang Denk, wd@denx.de
*
* Simple 16550A serial driver
*
* Originally from linux source (drivers/char/ps2ser.c)
*
* Used by the PS/2 multiplexer driver (ps2mult.c)
*
***********************************************************************/
#include <common.h>
#include <asm/io.h>
#include <asm/atomic.h>
#include <ps2mult.h>
/* This is needed for ns16550.h */
#ifndef CONFIG_SYS_NS16550_REG_SIZE
#define CONFIG_SYS_NS16550_REG_SIZE 1
#endif
#include <ns16550.h>
DECLARE_GLOBAL_DATA_PTR;
/* #define DEBUG */
#define PS2SER_BAUD 57600
#ifdef CONFIG_MPC5xxx
#if CONFIG_PS2SERIAL == 1
#define PSC_BASE MPC5XXX_PSC1
#elif CONFIG_PS2SERIAL == 2
#define PSC_BASE MPC5XXX_PSC2
#elif CONFIG_PS2SERIAL == 3
#define PSC_BASE MPC5XXX_PSC3
#elif CONFIG_PS2SERIAL == 4
#define PSC_BASE MPC5XXX_PSC4
#elif CONFIG_PS2SERIAL == 5
#define PSC_BASE MPC5XXX_PSC5
#elif CONFIG_PS2SERIAL == 6
#define PSC_BASE MPC5XXX_PSC6
#else
#error CONFIG_PS2SERIAL must be in 1 ... 6
#endif
#else
#if CONFIG_PS2SERIAL == 1
#define COM_BASE (CONFIG_SYS_CCSRBAR+0x4500)
#elif CONFIG_PS2SERIAL == 2
#define COM_BASE (CONFIG_SYS_CCSRBAR+0x4600)
#else
#error CONFIG_PS2SERIAL must be in 1 ... 2
#endif
#endif /* CONFIG_MPC5xxx / other */
static int ps2ser_getc_hw(void);
static void ps2ser_interrupt(void *dev_id);
extern struct serial_state rs_table[]; /* in serial.c */
static u_char ps2buf[PS2BUF_SIZE];
static atomic_t ps2buf_cnt;
static int ps2buf_in_idx;
static int ps2buf_out_idx;
#ifdef CONFIG_MPC5xxx
int ps2ser_init(void)
{
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
unsigned long baseclk;
int div;
/* reset PSC */
psc->command = PSC_SEL_MODE_REG_1;
/* select clock sources */
psc->psc_clock_select = 0;
baseclk = (gd->arch.ipb_clk + 16) / 32;
/* switch to UART mode */
psc->sicr = 0;
/* configure parity, bit length and so on */
psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE;
psc->mode = PSC_MODE_ONE_STOP;
/* set up UART divisor */
div = (baseclk + (PS2SER_BAUD/2)) / PS2SER_BAUD;
psc->ctur = (div >> 8) & 0xff;
psc->ctlr = div & 0xff;
/* disable all interrupts */
psc->psc_imr = 0;
/* reset and enable Rx/Tx */
psc->command = PSC_RST_RX;
psc->command = PSC_RST_TX;
psc->command = PSC_RX_ENABLE | PSC_TX_ENABLE;
return (0);
}
#else
int ps2ser_init(void)
{
NS16550_t com_port = (NS16550_t)COM_BASE;
com_port->ier = 0x00;
com_port->lcr = UART_LCR_BKSE | UART_LCR_8N1;
com_port->dll = (CONFIG_SYS_NS16550_CLK / 16 / PS2SER_BAUD) & 0xff;
com_port->dlm = ((CONFIG_SYS_NS16550_CLK / 16 / PS2SER_BAUD) >> 8) & 0xff;
com_port->lcr = UART_LCR_8N1;
com_port->mcr = (UART_MCR_DTR | UART_MCR_RTS);
com_port->fcr = (UART_FCR_FIFO_EN | UART_FCR_RXSR | UART_FCR_TXSR);
return (0);
}
#endif /* CONFIG_MPC5xxx / other */
void ps2ser_putc(int chr)
{
#ifdef CONFIG_MPC5xxx
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
#else
NS16550_t com_port = (NS16550_t)COM_BASE;
#endif
debug(">>>> 0x%02x\n", chr);
#ifdef CONFIG_MPC5xxx
while (!(psc->psc_status & PSC_SR_TXRDY));
psc->psc_buffer_8 = chr;
#else
while ((com_port->lsr & UART_LSR_THRE) == 0);
com_port->thr = chr;
#endif
}
static int ps2ser_getc_hw(void)
{
#ifdef CONFIG_MPC5xxx
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
#else
NS16550_t com_port = (NS16550_t)COM_BASE;
#endif
int res = -1;
#ifdef CONFIG_MPC5xxx
if (psc->psc_status & PSC_SR_RXRDY) {
res = (psc->psc_buffer_8);
}
#else
if (com_port->lsr & UART_LSR_DR) {
res = com_port->rbr;
}
#endif
return res;
}
int ps2ser_getc(void)
{
volatile int chr;
int flags;
debug("<< ");
flags = disable_interrupts();
do {
if (atomic_read(&ps2buf_cnt) != 0) {
chr = ps2buf[ps2buf_out_idx++];
ps2buf_out_idx &= (PS2BUF_SIZE - 1);
atomic_dec(&ps2buf_cnt);
} else {
chr = ps2ser_getc_hw();
}
}
while (chr < 0);
if (flags)
enable_interrupts();
debug("0x%02x\n", chr);
return chr;
}
int ps2ser_check(void)
{
int flags;
flags = disable_interrupts();
ps2ser_interrupt(NULL);
if (flags) enable_interrupts();
return atomic_read(&ps2buf_cnt);
}
static void ps2ser_interrupt(void *dev_id)
{
#ifdef CONFIG_MPC5xxx
volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE;
#else
NS16550_t com_port = (NS16550_t)COM_BASE;
#endif
int chr;
int status;
do {
chr = ps2ser_getc_hw();
#ifdef CONFIG_MPC5xxx
status = psc->psc_status;
#else
status = com_port->lsr;
#endif
if (chr < 0) continue;
if (atomic_read(&ps2buf_cnt) < PS2BUF_SIZE) {
ps2buf[ps2buf_in_idx++] = chr;
ps2buf_in_idx &= (PS2BUF_SIZE - 1);
atomic_inc(&ps2buf_cnt);
} else {
printf ("ps2ser.c: buffer overflow\n");
}
#ifdef CONFIG_MPC5xxx
} while (status & PSC_SR_RXRDY);
#else
} while (status & UART_LSR_DR);
#endif
if (atomic_read(&ps2buf_cnt)) {
ps2mult_callback(atomic_read(&ps2buf_cnt));
}
}
|
