1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366
|
/*
* Xilinx xps_ll_temac ethernet driver for u-boot
*
* SDMA sub-controller
*
* Copyright (C) 2011 - 2012 Stephan Linz <linz@li-pro.net>
* Copyright (C) 2008 - 2011 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008 - 2011 PetaLogix
*
* Based on Yoshio Kashiwagi kashiwagi@co-nss.co.jp driver
* Copyright (C) 2008 Nissin Systems Co.,Ltd.
* March 2008 created
*
* CREDITS: tsec driver
*
* SPDX-License-Identifier: GPL-2.0+
*
* [0]: http://www.xilinx.com/support/documentation
*
* [M]: [0]/ip_documentation/mpmc.pdf
* [S]: [0]/ip_documentation/xps_ll_temac.pdf
* [A]: [0]/application_notes/xapp1041.pdf
*/
#include <config.h>
#include <common.h>
#include <net.h>
#include <asm/types.h>
#include <asm/io.h>
#include "xilinx_ll_temac.h"
#include "xilinx_ll_temac_sdma.h"
#define TX_BUF_CNT 2
static unsigned int rx_idx; /* index of the current RX buffer */
static unsigned int tx_idx; /* index of the current TX buffer */
struct rtx_cdmac_bd {
struct cdmac_bd rx[PKTBUFSRX];
struct cdmac_bd tx[TX_BUF_CNT];
};
/*
* DMA Buffer Descriptor alignment
*
* If the address contained in the Next Descriptor Pointer register is not
* 8-word aligned or reaches beyond the range of available memory, the SDMA
* halts processing and sets the CDMAC_BD_STCTRL_ERROR bit in the respective
* status register (tx_chnl_sts or rx_chnl_sts).
*
* [1]: [0]/ip_documentation/mpmc.pdf
* page 161, Next Descriptor Pointer
*/
static struct rtx_cdmac_bd cdmac_bd __aligned(32);
#if defined(CONFIG_XILINX_440) || defined(CONFIG_XILINX_405)
/*
* Indirect DCR access operations mi{ft}dcr_xilinx() espacialy
* for Xilinx PowerPC implementations on FPGA.
*
* FIXME: This part should go up to arch/powerpc -- but where?
*/
#include <asm/processor.h>
#define XILINX_INDIRECT_DCR_ADDRESS_REG 0
#define XILINX_INDIRECT_DCR_ACCESS_REG 1
inline unsigned mifdcr_xilinx(const unsigned dcrn)
{
mtdcr(XILINX_INDIRECT_DCR_ADDRESS_REG, dcrn);
return mfdcr(XILINX_INDIRECT_DCR_ACCESS_REG);
}
inline void mitdcr_xilinx(const unsigned dcrn, int val)
{
mtdcr(XILINX_INDIRECT_DCR_ADDRESS_REG, dcrn);
mtdcr(XILINX_INDIRECT_DCR_ACCESS_REG, val);
}
/* Xilinx Device Control Register (DCR) in/out accessors */
inline unsigned ll_temac_xldcr_in32(phys_addr_t addr)
{
return mifdcr_xilinx((const unsigned)addr);
}
inline void ll_temac_xldcr_out32(phys_addr_t addr, unsigned value)
{
mitdcr_xilinx((const unsigned)addr, value);
}
void ll_temac_collect_xldcr_sdma_reg_addr(struct eth_device *dev)
{
struct ll_temac *ll_temac = dev->priv;
phys_addr_t dmac_ctrl = ll_temac->ctrladdr;
phys_addr_t *ra = ll_temac->sdma_reg_addr;
ra[TX_NXTDESC_PTR] = dmac_ctrl + TX_NXTDESC_PTR;
ra[TX_CURBUF_ADDR] = dmac_ctrl + TX_CURBUF_ADDR;
ra[TX_CURBUF_LENGTH] = dmac_ctrl + TX_CURBUF_LENGTH;
ra[TX_CURDESC_PTR] = dmac_ctrl + TX_CURDESC_PTR;
ra[TX_TAILDESC_PTR] = dmac_ctrl + TX_TAILDESC_PTR;
ra[TX_CHNL_CTRL] = dmac_ctrl + TX_CHNL_CTRL;
ra[TX_IRQ_REG] = dmac_ctrl + TX_IRQ_REG;
ra[TX_CHNL_STS] = dmac_ctrl + TX_CHNL_STS;
ra[RX_NXTDESC_PTR] = dmac_ctrl + RX_NXTDESC_PTR;
ra[RX_CURBUF_ADDR] = dmac_ctrl + RX_CURBUF_ADDR;
ra[RX_CURBUF_LENGTH] = dmac_ctrl + RX_CURBUF_LENGTH;
ra[RX_CURDESC_PTR] = dmac_ctrl + RX_CURDESC_PTR;
ra[RX_TAILDESC_PTR] = dmac_ctrl + RX_TAILDESC_PTR;
ra[RX_CHNL_CTRL] = dmac_ctrl + RX_CHNL_CTRL;
ra[RX_IRQ_REG] = dmac_ctrl + RX_IRQ_REG;
ra[RX_CHNL_STS] = dmac_ctrl + RX_CHNL_STS;
ra[DMA_CONTROL_REG] = dmac_ctrl + DMA_CONTROL_REG;
}
#endif /* CONFIG_XILINX_440 || ONFIG_XILINX_405 */
/* Xilinx Processor Local Bus (PLB) in/out accessors */
inline unsigned ll_temac_xlplb_in32(phys_addr_t addr)
{
return in_be32((void *)addr);
}
inline void ll_temac_xlplb_out32(phys_addr_t addr, unsigned value)
{
out_be32((void *)addr, value);
}
/* collect all register addresses for Xilinx PLB in/out accessors */
void ll_temac_collect_xlplb_sdma_reg_addr(struct eth_device *dev)
{
struct ll_temac *ll_temac = dev->priv;
struct sdma_ctrl *sdma_ctrl = (void *)ll_temac->ctrladdr;
phys_addr_t *ra = ll_temac->sdma_reg_addr;
ra[TX_NXTDESC_PTR] = (phys_addr_t)&sdma_ctrl->tx_nxtdesc_ptr;
ra[TX_CURBUF_ADDR] = (phys_addr_t)&sdma_ctrl->tx_curbuf_addr;
ra[TX_CURBUF_LENGTH] = (phys_addr_t)&sdma_ctrl->tx_curbuf_length;
ra[TX_CURDESC_PTR] = (phys_addr_t)&sdma_ctrl->tx_curdesc_ptr;
ra[TX_TAILDESC_PTR] = (phys_addr_t)&sdma_ctrl->tx_taildesc_ptr;
ra[TX_CHNL_CTRL] = (phys_addr_t)&sdma_ctrl->tx_chnl_ctrl;
ra[TX_IRQ_REG] = (phys_addr_t)&sdma_ctrl->tx_irq_reg;
ra[TX_CHNL_STS] = (phys_addr_t)&sdma_ctrl->tx_chnl_sts;
ra[RX_NXTDESC_PTR] = (phys_addr_t)&sdma_ctrl->rx_nxtdesc_ptr;
ra[RX_CURBUF_ADDR] = (phys_addr_t)&sdma_ctrl->rx_curbuf_addr;
ra[RX_CURBUF_LENGTH] = (phys_addr_t)&sdma_ctrl->rx_curbuf_length;
ra[RX_CURDESC_PTR] = (phys_addr_t)&sdma_ctrl->rx_curdesc_ptr;
ra[RX_TAILDESC_PTR] = (phys_addr_t)&sdma_ctrl->rx_taildesc_ptr;
ra[RX_CHNL_CTRL] = (phys_addr_t)&sdma_ctrl->rx_chnl_ctrl;
ra[RX_IRQ_REG] = (phys_addr_t)&sdma_ctrl->rx_irq_reg;
ra[RX_CHNL_STS] = (phys_addr_t)&sdma_ctrl->rx_chnl_sts;
ra[DMA_CONTROL_REG] = (phys_addr_t)&sdma_ctrl->dma_control_reg;
}
/* Check for TX and RX channel errors. */
static inline int ll_temac_sdma_error(struct eth_device *dev)
{
int err;
struct ll_temac *ll_temac = dev->priv;
phys_addr_t *ra = ll_temac->sdma_reg_addr;
err = ll_temac->in32(ra[TX_CHNL_STS]) & CHNL_STS_ERROR;
err |= ll_temac->in32(ra[RX_CHNL_STS]) & CHNL_STS_ERROR;
return err;
}
int ll_temac_init_sdma(struct eth_device *dev)
{
struct ll_temac *ll_temac = dev->priv;
struct cdmac_bd *rx_dp;
struct cdmac_bd *tx_dp;
phys_addr_t *ra = ll_temac->sdma_reg_addr;
int i;
printf("%s: SDMA: %d Rx buffers, %d Tx buffers\n",
dev->name, PKTBUFSRX, TX_BUF_CNT);
/* Initialize the Rx Buffer descriptors */
for (i = 0; i < PKTBUFSRX; i++) {
rx_dp = &cdmac_bd.rx[i];
memset(rx_dp, 0, sizeof(*rx_dp));
rx_dp->next_p = rx_dp;
rx_dp->buf_len = PKTSIZE_ALIGN;
rx_dp->phys_buf_p = (u8 *)net_rx_packets[i];
flush_cache((u32)rx_dp->phys_buf_p, PKTSIZE_ALIGN);
}
flush_cache((u32)cdmac_bd.rx, sizeof(cdmac_bd.rx));
/* Initialize the TX Buffer Descriptors */
for (i = 0; i < TX_BUF_CNT; i++) {
tx_dp = &cdmac_bd.tx[i];
memset(tx_dp, 0, sizeof(*tx_dp));
tx_dp->next_p = tx_dp;
}
flush_cache((u32)cdmac_bd.tx, sizeof(cdmac_bd.tx));
/* Reset index counter to the Rx and Tx Buffer descriptors */
rx_idx = tx_idx = 0;
/* initial Rx DMA start by writing to respective TAILDESC_PTR */
ll_temac->out32(ra[RX_CURDESC_PTR], (int)&cdmac_bd.rx[rx_idx]);
ll_temac->out32(ra[RX_TAILDESC_PTR], (int)&cdmac_bd.rx[rx_idx]);
return 0;
}
int ll_temac_halt_sdma(struct eth_device *dev)
{
unsigned timeout = 50; /* 1usec * 50 = 50usec */
struct ll_temac *ll_temac = dev->priv;
phys_addr_t *ra = ll_temac->sdma_reg_addr;
/*
* Soft reset the DMA
*
* Quote from MPMC documentation: Writing a 1 to this field
* forces the DMA engine to shutdown and reset itself. After
* setting this bit, software must poll it until the bit is
* cleared by the DMA. This indicates that the reset process
* is done and the pipeline has been flushed.
*/
ll_temac->out32(ra[DMA_CONTROL_REG], DMA_CONTROL_RESET);
while (timeout && (ll_temac->in32(ra[DMA_CONTROL_REG])
& DMA_CONTROL_RESET)) {
timeout--;
udelay(1);
}
if (!timeout) {
printf("%s: Timeout\n", __func__);
return -1;
}
return 0;
}
int ll_temac_reset_sdma(struct eth_device *dev)
{
u32 r;
struct ll_temac *ll_temac = dev->priv;
phys_addr_t *ra = ll_temac->sdma_reg_addr;
/* Soft reset the DMA. */
if (ll_temac_halt_sdma(dev))
return -1;
/* Now clear the interrupts. */
r = ll_temac->in32(ra[TX_CHNL_CTRL]);
r &= ~CHNL_CTRL_IRQ_MASK;
ll_temac->out32(ra[TX_CHNL_CTRL], r);
r = ll_temac->in32(ra[RX_CHNL_CTRL]);
r &= ~CHNL_CTRL_IRQ_MASK;
ll_temac->out32(ra[RX_CHNL_CTRL], r);
/* Now ACK pending IRQs. */
ll_temac->out32(ra[TX_IRQ_REG], IRQ_REG_IRQ_MASK);
ll_temac->out32(ra[RX_IRQ_REG], IRQ_REG_IRQ_MASK);
/* Set tail-ptr mode, disable errors for both channels. */
ll_temac->out32(ra[DMA_CONTROL_REG],
/* Enable use of tail pointer register */
DMA_CONTROL_TPE |
/* Disable error when 2 or 4 bit coalesce cnt overfl */
DMA_CONTROL_RXOCEID |
/* Disable error when 2 or 4 bit coalesce cnt overfl */
DMA_CONTROL_TXOCEID);
return 0;
}
int ll_temac_recv_sdma(struct eth_device *dev)
{
int length, pb_idx;
struct cdmac_bd *rx_dp = &cdmac_bd.rx[rx_idx];
struct ll_temac *ll_temac = dev->priv;
phys_addr_t *ra = ll_temac->sdma_reg_addr;
if (ll_temac_sdma_error(dev)) {
if (ll_temac_reset_sdma(dev))
return -1;
ll_temac_init_sdma(dev);
}
flush_cache((u32)rx_dp, sizeof(*rx_dp));
if (!(rx_dp->sca.stctrl & CDMAC_BD_STCTRL_COMPLETED))
return 0;
if (rx_dp->sca.stctrl & (CDMAC_BD_STCTRL_SOP | CDMAC_BD_STCTRL_EOP)) {
pb_idx = rx_idx;
length = rx_dp->sca.app[4] & CDMAC_BD_APP4_RXBYTECNT_MASK;
} else {
pb_idx = -1;
length = 0;
printf("%s: Got part of package, unsupported (%x)\n",
__func__, rx_dp->sca.stctrl);
}
/* flip the buffer */
flush_cache((u32)rx_dp->phys_buf_p, length);
/* reset the current descriptor */
rx_dp->sca.stctrl = 0;
rx_dp->sca.app[4] = 0;
flush_cache((u32)rx_dp, sizeof(*rx_dp));
/* Find next empty buffer descriptor, preparation for next iteration */
rx_idx = (rx_idx + 1) % PKTBUFSRX;
rx_dp = &cdmac_bd.rx[rx_idx];
flush_cache((u32)rx_dp, sizeof(*rx_dp));
/* DMA start by writing to respective TAILDESC_PTR */
ll_temac->out32(ra[RX_CURDESC_PTR], (int)&cdmac_bd.rx[rx_idx]);
ll_temac->out32(ra[RX_TAILDESC_PTR], (int)&cdmac_bd.rx[rx_idx]);
if (length > 0 && pb_idx != -1)
net_process_received_packet(net_rx_packets[pb_idx], length);
return 0;
}
int ll_temac_send_sdma(struct eth_device *dev, void *packet, int length)
{
unsigned timeout = 50; /* 1usec * 50 = 50usec */
struct cdmac_bd *tx_dp = &cdmac_bd.tx[tx_idx];
struct ll_temac *ll_temac = dev->priv;
phys_addr_t *ra = ll_temac->sdma_reg_addr;
if (ll_temac_sdma_error(dev)) {
if (ll_temac_reset_sdma(dev))
return -1;
ll_temac_init_sdma(dev);
}
tx_dp->phys_buf_p = (u8 *)packet;
tx_dp->buf_len = length;
tx_dp->sca.stctrl = CDMAC_BD_STCTRL_SOP | CDMAC_BD_STCTRL_EOP |
CDMAC_BD_STCTRL_STOP_ON_END;
flush_cache((u32)packet, length);
flush_cache((u32)tx_dp, sizeof(*tx_dp));
/* DMA start by writing to respective TAILDESC_PTR */
ll_temac->out32(ra[TX_CURDESC_PTR], (int)tx_dp);
ll_temac->out32(ra[TX_TAILDESC_PTR], (int)tx_dp);
/* Find next empty buffer descriptor, preparation for next iteration */
tx_idx = (tx_idx + 1) % TX_BUF_CNT;
tx_dp = &cdmac_bd.tx[tx_idx];
do {
flush_cache((u32)tx_dp, sizeof(*tx_dp));
udelay(1);
} while (timeout-- && !(tx_dp->sca.stctrl & CDMAC_BD_STCTRL_COMPLETED));
if (!timeout) {
printf("%s: Timeout\n", __func__);
return -1;
}
return 0;
}
|